Computer support technician jobs in Edison, New JerseyCreate job alerts

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, job stability and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Working under limited supervision, the Black Seal Operator has hands-on experience with high-pressure boilers, as well as a working knowledge of sump pumps and water heater installations. This position is responsible for performing skilled work in the following areas: mechanical, electrical, pneumatic, plumbing, boiler, wastewater and general maintenance of equipment/structures and resolving emergency situations by taking appropriate corrective action and completing the repairs needed to ensure that systems are operational and are functioning safely and efficiently. • Operate, maintain, and troubleshoot high-pressure steam and hot water boilers in compliance with state and local codes., • Conduct routine inspections, diagnostics, and preventive maintenance on boiler systems, burners, and associated controls., • Monitor boiler readings, maintain logs, and ensure optimal performance and energy efficiency., • Install, service, and repair water heaters (gas and electric) as needed., • Maintain, troubleshoot, and replace sump pumps, including float switches, check valves, and discharge piping., • Perform water treatment testing and adjust chemical feed systems to maintain proper water quality., • Respond promptly to emergency calls and troubleshoot mechanical, plumbing, and heating issues during on-call hours., • Ensure compliance with Black Seal high Pressure Boiler Operator licensing requirements and safety standards., • Assist with general facility maintenance as directed, including light plumbing, electrical, and HVAC support., • Valid Black Seal high Pressure Boiler Operator License in New Jersey, • Minimum 3 years of experience operating and maintaining low-pressure boilers, • Hands-on experience with sump pump systems and water heater installation/repair, • Ability to read and interpret technical manuals, blueprints, and schematics, • Strong understanding of safety regulations, codes, and emergency procedures, • Valid driver’s license and reliable transportation, • Ability to work independently and as part of a team, • Typically requires accreditation from a technical school or an applicable skilled trades program and 7 to 10 years of industrial maintenance experience or the equivalent., • Equipment Maintenance, Technical Understanding, Technical Zeal, Deals with Uncertainty, Basic Safety, Power Tools, Attention to Detail, Flexibility, Supervision, Job Knowledge, Productivity, • Must have a working knowledge of AC and DC circuits with the ability to work on voltages ranging from 5 Volt DC to 480 Volt AC. Must be able to fluently read mechanical and electrical blueprints, • Must possess the knowledge to operate basic computer software such as Word, Excel, and Outlook as well as work with a Computerized Maintenance Management System., • Required to provide own set of tools., • Must have a valid driver license. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: Medical, Dental, and Vision Insurance 401k with Company Match Paid Time Off & Paid Holidays Quarterly Customer Service Bonus Program Company Paid Life Insurance Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND2

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: The Help Desk Technician will work five days a week on-site in Somerset, NJ. The Level 2 Desktop Technician provides hands-on technical support for desktop systems, hardware, software, and network connectivity across office, production, warehouse, and remote environments. This role is responsible for resolving helpdesk requests via phone, email, and the ticketing system while maintaining service levels and ensuring timely ticket closure. The technician supports Windows, macOS, ChromeOS, mobile devices, IP telephony, printers, production-floor technology, and conference room technology. The role also performs user account administration, employee onboarding, and offboarding tasks. This position requires onsite support across multiple buildings, collaboration with IT colleagues on tasks and projects, creation of documentation for troubleshooting and resolutions, and participation in an on-call rotation to support business-critical operations outside of typical office hours in a 24/7 facility. Key Responsibilities: Routine IT Functions • Provide technical assistance and support for incoming requests and issues related to desktop systems, software, and hardware across both IT, production, and warehouse environments., • Support office staff, production staff, production floor, and warehouse equipment., • Assists in managing user profiles in Active Directory, Exchange, and Azure AD., • Investigate, prioritize, and resolve issues in a timely manner while maintaining Helpdesk ticket queue (ManageEngine ServiceDesk)., • Must be able to drive and provide onsite support for 5 buildings within Somerset., • Install and configure new desktops, laptops, tablets, and conference room technology with required company software, including Windows, macOS, Chromebooks, Android tablets, Vibe Boards, and Smart TVs., • Assist with IP telephone support., • Provide support for and maintain working knowledge of software and platforms used across the environment, including Adobe applications, Citrix, Microsoft Teams, Slack, ManageEngine products, Mosyle, Intune, Splashtop, Zscaler, SentinelOne, Tenable, and various AI tools. Other Important Responsibilities: • Handle email and telephone correspondence in a timely and professional manner., • Respond to inquiries for the purpose of resolving problems, providing information, and or escalating issues to appropriate personnel., • Perform other miscellaneous duties as assigned. Qualifications: • Minimum 3 to 5 years of industry experience., • Bachelor's degree, A+, or Microsoft certifications., • High level of computer literacy including working knowledge of Windows 10 and 11, ChromeOS, iOS, Android, Mac and Microsoft Office applications., • Knowledge of AI fundamentals with entry‑level experience applying AI tools in a business or technical environment, • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check work., • Excellent time management skills., • Proficient in disassembling and servicing desktop and laptop systems to diagnose issues and replace components., • Perform employee onboarding, laptop deployment, and offboarding tasks., • Task-oriented mindset with excellent organizational skills, strong prioritization abilities, and the initiative to identify and act independently., • Self-motivated, enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, sensitive to client needs, creative and innovative., • Document all troubleshooting steps, resolutions, and root cause details within each ticket prior to closure, and contribute solutions to the knowledge base as appropriate., • Diagnose and resolve hardware, software, and peripheral issues for office staff and production-floor equipment across all Compo sites (Pierce, Davidson, Memorial, Roosevelt, Apgar buildings and Remote/International users)., • Maintain and manage shared printers, label printers, and production-floor barcode scanning equipment., • Create, modify, and deactivate user accounts in Active Directory, Azure AD, and Microsoft Exchange in accordance with HR onboarding/offboarding checklists., • Demonstrate strong understanding and knowledge of LAN/WAN/Wi-Fi architecture including VLANs, DHCP, DNS, and basic switch port identification across the campus network., • Troubleshoot network connectivity issues at the desktop level, including ethernet drops and Wi-Fi authentication., • Foundational understanding of AI tools and their practical application in a business or technical support environment., • Maintains a clean, organized, and professional work area at all times, including personal workspace and shared IT storage areas, ensuring equipment, tools, and materials are properly stored, labeled, and free of clutter. Physical requirements and work environment: • Must be able to work beyond 40 hour week during upgrades or new functionality rollout if necessary., • Must be able to work a flexible schedule, including potential weekends, early mornings, late hours, or staggered shifts., • Participate in a rotating on-call schedule to provide off-hours and weekend support for the production floor and international users., • Must have a valid driver's license and personal vehicle., • Must be able to lift 50 lbs., • Must be able to sustain office work for 8+ hours per day including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Using a ladder, • Office environment is of moderate noise level., • Production floor is of medium-high noise level. At CompoSecure, we believe in supporting our employees with a comprehensive benefits package that promotes health, financial well-being, and work-life balance. Our full-time team members enjoy access to: • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job DescriptionDescription: Software Support Technician - Entry Level Iselin New Jersey Software Support Technician- Entry Level WHO WE ARE: Celerant Technology Corporation is a leading provider of premium, advanced retail management software for retail organizations. Our software, developed in-house, manages all areas of the retail business including point of sale, inventory management, warehouse, distribution, allocation, e-commerce, sales back office, advanced reporting and more. We give retailers the capabilities necessary to run their operation both efficiently and profitably. Celerant is a successful software company that is rapidly expanding. The main headquarters are located in Staten Island, New York, as well as additional satellite offices in Georgia, Oklahoma, Texas and California. Celerant's staff consists of several departments including Marketing, Sales, Development, Quality Assurance Testing, Hardware, Implementation and Training, and Technical Support. For more information, visit us at . The ideal Technical Support candidate should be detailed orientated, possess the ability to work effectively with co-workers and end users, and exhibit outstanding customer service skills. RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus. Requirements: RESPONSIBILITIES: • Answer phone calls and email inquiries from users and provide technical support/guidance to resolve issues., • Log all incidents into the department call tracking system as per departmental standards., • Assist in the creation of knowledge base articles as they pertain to the present and future environment, • Work on unresolved issues from evening and weekend shifts., • Escalate any possible wide spread issues to the Technical Support Manager as identified by e.g., high volume of calls pertaining to a similar issue, etc., • Support Implementation/Training Team with any customer issues. SKILL REQUIREMENTS: • BA or equivalent degree in Computer Science, Information Technology, or related field. • Basic SQL knowledge preferred., • Relational database experience is a plus.

Posting Date 03/12/2026 1200 Randolph Rd, Plainfield, New Jersey, 07060-3361, United States of America Registered Nurse DSD Alaris Health at St. Mary's, 135 S Center St, City of Orange, NJ 07050 3 Days A Week, 12+ Hour Shifts No On Call Training Provided DaVita Kidney Care, is bringing our industry-leading clinical quality to patients on-site at skilled nursing facilities (SNF) through a new team called DaVita Skilled Nursing Dialysis Services. Approximately 10% of all dialysis patients reside in a SNF and are transported to dialysis three times a week placing a significant burden on patients and adding significant avoidable costs to the health care system. DSD Services teammates will have access to all the capabilities and resources DaVita has to offer, and will work to quickly leverage these to develop the infrastructure and rapidly grow the new service line. Ideal teammates will have experience in dialysis, get energized by a start-up type environment and improving the lives of patients, and have a track record of finding ways to Get Stuff Done (GSD). Teammates must be comfortable working autonomously and have demonstrated the ability to collaborate with cross-functional resources across the organization. What you can expect: In this role, you take responsibility for the complete ongoing care of each patient to ensure their dialysis treatment stays on track. DSD RNs will troubleshoot, and make sound decisions for our patients related to their dialysis treatment and will occasionally partner alongside the SNF staff to coordinate care. Primary work schedule will be 3 days a week, with occasional Saturday work. No on call required. Your impact on the lives of our patients and their families will be felt every day. Patient education. RNs by training, are Educators. As a DSD Services RN, you will be provided the opportunity to conduct impactful and meaningful education to patients and their families in the SNF setting. Direct Patient Care: The RN's primary responsibility is to independently demonstrate best practice techniques and deliver optimal dialysis care. The role includes supervising Dialysis Technician who are tasked with delivering tandem care to meet the capacity and efficiency goals of the program. Complexity - DSD Dialysis care is a complex but fulfilling service line. Meeting and/or exceeding clinical outcomes are the goals and multitasking is an expectation to meet the needs of the service, the patients and our SNF partners. Autonomy and Critical Thinking. Provide comprehensive patient care in an independent setting. Plan to be on your toes at all times. You use your mind constantly. You apply your "core" nursing skills to assess, diagnose and implement complete care plans as you look at the whole patient. There's a lot to track and manage and the joy comes in witnessing how your care impacts patients' lives. Some details about this position: * Your training will include a combination of classroom and hands-on learning, through DaVita's award-winning training programs * Training may take place in a facility or a training clinic with a class of new teammates other than your assigned home clinic * Hours of work may vary during the training period; however, you will typically be working between 32-40 hours/week during training * May be asked to support other local SNF dens You must have: * Current Registered Nurse (RN) license in the state of practice; Minimum of 12 months' of RN experience * Associates Degree in Nursing (A.D.N) from accredited school of nursing required; Bachelor of Science in Nursing (B.S.N); three-year diploma from accredited diploma program may be substituted for nursing degree * Basic computer skills and proficiency in MS Word and Outlook You might also have (a.k.a. nice-to-haves): * Previous Chronic Hemodialysis, Acute Dialysis and/or Peritoneal Dialysis (PD) nursing experience * Training/Teaching/Healthcare Education background * Certified Nephrology Nurse (CNN) or Certified Dialysis Nurse (CDN) What We'll Provide: More than just pay, our DaVita Rewards package connects teammates to what matters most including: * Comprehensive benefits: Medical, dental, vision, 401(k) match, paid time off, PTO cash out * Support for you and your family: family resources, EAP counseling sessions, access Headspace, backup child and elder care, maternity/paternity leave and more * Paid training: DaVita offers all new dialysis teammates a robust, paid training program to help you learn the right dialysis skills. The training is a mix of classroom and hands on training. * Opportunity for a nursing career for a lifetime. DaVita is committed to providing robust development and experiences for nurses. Whether you chose to remain in a patient facing/caregiving role or grow (leadership operations, corporate functions, integrated care, clinical research), we can guide you on that journey. We offer programs such as: * THRIVE: Develops high-potential nurses, clinical coordinators and clinic nurse managers into operational managers * DSSL & SPARK - Gives clinical teammates the chance to develop their supervisory and leadership skill set * 100+ CEU courses at no cost * Gateway: A web-based application available to teammates for career planning, learning and training, and recognition. It allows you to access new courses and CE credits and explore career paths on your own time. It also has a newsfeed to keep you up to date on Village news and functions as a social platform to connect you to teammates At DaVita, we strive to be a community first and a company second. We want all teammates to experience DaVita as "a place where I belong." Our goal is to embed Diversity & Belonging into everything we do in our Village, so that it becomes part of who we are. We are proud to be an equal opportunity workplace and an affirmative action employer. As such, individuals are recruited, hired, assigned and promoted without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, protected veteran status, or any other protected characteristic. #LI-EO1 At DaVita, we strive to be a community first and a company second. We want all teammates to experience DaVita as "a place where I belong." Our goal is to embed belonging into everything we do in our Village, so that it becomes part of who we are. We are proud to be an equal opportunity workplace and comply with state and federal affirmative action requirements. Individuals are recruited, hired, assigned and promoted without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, protected veteran status, or any other protected characteristic. This position will be open for a minimum of three days. The Wage Range for the role is $42.00 - $57.00/hour. For location-specific minimum wage details, see the following link: ___ Compensation for the role will depend on a number of factors, including a candidate's qualifications, skills, competencies and experience. DaVita offers a competitive total rewards package, which includes a 401k match, healthcare coverage and a broad range of other benefits. Learn more at ___ Colorado Residents: Please do not respond to any questions in this initial application that may seek age-identifying information such as age, date of birth, or dates of school attendance or graduation. You may also redact this information from any materials you submit during the application process. You will not be penalized for redacting or removing this information.

Posting Date 03/20/2026 1200 Randolph Rd, Plainfield, New Jersey, 07060-3361, United States of America Patient Care Technician DSD Alaris Health at St. Mary's, 135 S Center St, City of Orange, NJ 07050 Per Diem No On Call Dialysis Experience/CCHT Required DaVita Kidney Care, is bringing our industry-leading clinical quality to patients on-site at skilled nursing facilities (SNF) through a new team called DaVita Skilled Nursing Dialysis Services. Approximately 10% of all dialysis patients reside in a SNF and are transported to dialysis three times a week placing a significant burden on patients and adding significant avoidable costs to the health care system. DSD Services teammates will have access to all the capabilities and resources DaVita has to offer, and will work to quickly leverage these to develop the infrastructure and rapidly grow the new service line. Ideal teammates will have significant experience within DaVita, get energized by a start-up type environment and improving the lives of patients, and have a track record of finding ways to GSD. Teammates must be comfortable working autonomously and have demonstrated the ability to collaborate with cross-functional resources across the Village. What you can expect: In this role, you take responsibility for the complete ongoing care of each patient to ensure their dialysis treatment stays on track. PCTs will work in conjunction with dialysis RNs to provide dialysis care. You will work 3 days a week - with no required on call, yet your impact on the lives of our patients and their families will be felt every day. Patient Care: Spending the majority of your day in direct one-on-one patient care to provide safe, comfortable and hygienic dialysis treatment. Complexity: DSD Dialysis care is a complex but fulfilling service line. Meeting and/or exceeding clinical outcomes are the goals and multitasking is an expectation to meet the needs of the service, the patients and our SNF partners. Autonomy and Critical Thinking: Provide comprehensive patient care in an independent setting. Plan to be on your toes at all times. You use your mind constantly. You apply your "core" skills to monitor patients before, during and after dialysis treatment including measuring and recording stats, patient observations, and hemodialysis machine setup. There's a lot to track and manage and the joy comes in witnessing how your care impacts patients' lives. Some details about this position: • Your training will include a combination of classroom and hands-on learning, through DaVita's award-winning training programs, • Training may take place in a facility or a training clinic with a class of new teammates other than your assigned home clinic, • Hours of work may vary during the training period; however, you will typically be working between 32-40 hours/week during training, • May be asked to support other local SNF dens You must have: • Prior Hemo-Dialysis experience, • Valid Certified Clinical Hemodialysis Technician (CCHT) certification, • High school diploma or equivalent, • Basic computer skills and proficiency in MS Word and Outlook You might also have (a.k.a. nice-to-haves): • Training/Teaching/Healthcare Education background What We'll Provide: More than just pay, our DaVita Rewards package connects teammates to what matters most including: • Comprehensive benefits: Medical, dental, vision, 401(k) match, paid time off, PTO cash out, • Support for you and your family: family resources, EAP counseling sessions, access Headspace, backup child and elder care, maternity/paternity leave and more, • Paid training: DaVita offers all new dialysis teammates a robust, paid training program to help you learn the right dialysis skills. The training is a mix of classroom and hands on training., • Reimbursement for your Certified Hemodialysis Technician (CHT) license, • Preceptor University: Learn how to become teach future DaVita teammates clinical procedures and policies, • Opportunity to grow personally and professionally. DaVita is committed to providing robust development opportunities including: o DSSL & SPARK - Gives clinical teammates the chance to develop into supervisory and leadership skills o Bridge to Your Dreams: Offers high-performing patient care technicians (PCTs) a path to becoming a registered nurse through fully funded tuition and career coaching. o 100+ CEU courses at no cost o Gateway: A web-based application available to teammates for career planning, learning and training, and recognition. It allows you to access new courses and CE credits and explore career paths on your own time. It also has a newsfeed to keep you up to date on Village news and functions as a social platform to connect you to teammates #LI-EO1 At DaVita, we strive to be a community first and a company second. We want all teammates to experience DaVita as "a place where I belong." Our goal is to embed belonging into everything we do in our Village, so that it becomes part of who we are. We are proud to be an equal opportunity workplace and comply with state and federal affirmative action requirements. Individuals are recruited, hired, assigned and promoted without regard to race, national origin, religion, age, color, sex, sexual orientation, gender identity, disability, protected veteran status, or any other protected characteristic. This position will be open for a minimum of three days. The Wage Range for the role is $21.00 - $32.50/hour. For location-specific minimum wage details, see the following link: ___ Compensation for the role will depend on a number of factors, including a candidate's qualifications, skills, competencies and experience. DaVita offers a competitive total rewards package, which includes a 401k match, healthcare coverage and a broad range of other benefits. Learn more at ___ Colorado Residents: Please do not respond to any questions in this initial application that may seek age-identifying information such as age, date of birth, or dates of school attendance or graduation. You may also redact this information from any materials you submit during the application process. You will not be penalized for redacting or removing this information.

Job Description Job Title: Machine Technician Job Description The Machine Operator will be responsible for performing various tasks to set up, operate, monitor, and troubleshoot production machinery. The machine operator will set up and operate carton flow related equipment in accordance with established procedures and guidelines. Adjusts machine settings to complete tasks accurately, according to specifications and in a timely fashion. Responsibilities • Perform periodic checks on equipment and solve problems as detected., • Perform changeovers from one format to another., • Perform necessary pre-operation activities to ensure proper equipment startup and operation on multiple pieces of equipment., • Operate/monitor multiple pieces of equipment during operation to ensure quality production and minimal unplanned stops., • Communicate with team members and support teams to ensure continuous production of the correct product at high quality levels with minimal wasted time and materials., • Perform basic preventative maintenance on packaging machines and assist in troubleshooting machine related issues., • Report food safety and quality issues to Plant Management., • Keep machines and area clean and safe., • Follow standardized work procedures and adhere to safe work practices., • Focus on continuous improvement environment., • Troubleshooting, • Mechanical skills, • Packaging expertise, • Changeover proficiency, • Experience with hand tools to set up packaging lines, • Ability to troubleshoot packaging lines, • Mechanically inclined to do light adjustments and repairs, • Production knowledge, • Preventive maintenance experience, • Basic math and computer skills are required., • Ability to read, speak, and write English fluently is required. Join a growing company that values its employees. Enjoy appreciation events and complimentary snacks, with ample opportunity for growth. Work Environment Work in a food manufacturing environment adhering to strict Good Manufacturing Practices (GMP). Job Type & Location This is a Contract to Hire position based out of Piscataway, NJ. Pay and Benefits The pay range for this position is $23.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Piscataway,NJ. Application Deadline This position is anticipated to close on Apr 3, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionCompany Description LVMH Beauty's activities benefit from exceptional dynamism that relies on both the longevity and development of key lines, and on the boldness of new creations. All are driven by the same values: a quest for excellence, creativity, innovation, and perfect mastery of their image. The brands cultivate what makes them unique and are guaranteed to make them stand out in a highly competitive global market. The success of the LVMH Beauty Division depends on finding the right balance between major historic Houses, such as Parfums Christian Dior, Parfums Givenchy, Acqua di Parma, Guerlain, and newer brands with strong potential like Kenzo Parfums, Fresh, and Make Up For Ever. LVMH Beauty invites you today to join its North America teams. LVMH Beauty is part of the LVMH Group. Job Description This role will support all LVMH Beauty brands, including Dior, Guerlain, Acqua Di Parma, Givenchy, Maison Francis Kurkdjian, Kenzo, Make Up for Ever, and Fresh. The Technician will be joining the Regulatory Affairs & External Relations team to perform the submission of cosmetics to various governmental agencies in the USA and Canada. This includes working with domestic and international counterparts to prepare documentation, accurate and timely submission of information, and maintaining records on submissions, for KPIs. This is a Full-Time, 35-Hour Contract position and candidates will be required to work from LVMH’s East Brunswick office three days per week. The Contract dates for this role will end September 18, 2026. The team will be changing office locations at some point in 2026 to Cranbury, NJ. PRINCIPAL DUTIES AND RESPONSIBILITIES • Technician is responsible for following, providing feedback on and documenting internal regulatory processes for product listings., • Collect, gather, compile, and prepare documents needed for registration and submission to regulatory agencies and capturing submissions in internal databases., • Use internal platforms and MS Excel to collate and maintain registration information and data on each cosmetic product or facility., • Work collaboratively with internal regulatory affairs teams (domestic and international) to ensure all data is submitted accurately and on time.Qualifications, • Degree or equivalent related experience in Chemistry, Pharmacy, Biochemistry, or a related scientific field, • Exceptional computer skills (PowerPoint and MS Excel experience including VLOOKUP, LOOKUPS, PIVOT Tables), • Ability to pay particular attention to details, excellent organizational skills, good project management skills., • Ability to meet governmental deadlines., • High accuracy and reliability on assigned tasks, • Ability to work independently. Additional Information This job description is intended to cover the core accountabilities of the position and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. LVMH Inc. uses the published salary range as a guideline to provide our employees with market competitive pay while allowing for flexibility to recognize and reward various levels of expertise, performance and tenure. While the published salary range is a good faith reflection of the targeted salary level for the position, LVMH Inc. reserves the right to pay outside of the published salary range of $25.00-$30.00

Job Description Card Finishing Technician About CompoSecure Founded in 2000, CompoSecure (Nasdaq: CMPO) is a technology partner to market leaders, fintechs and consumers enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: This position is responsible for the set-up, repair, preventative maintenance, and operation of equipment to achieve production goals with a high level of detail and accuracy. Key Responsibilities: • Primary trainer for new hires in machine operation including documenting the training., • Lead the productivity, maintenance, and quality of the Muhlbauer equipment., • Complete responsibility of machine start-up, shut down and changeover., • Understand what the expectations are of a work order., • Set up machines as required for specific jobs including new programs, as needed., • Observe machine operations to verify accuracy of machine settings while producing a top-quality product., • Detect malfunctions or out-or-tolerance conditions., • Use precision measuring instruments such as drop gauges and push testers when setting up or adjusting machines., • Inspect "first part" and inspect work pieces throughout the production run for out-or-tolerance conditions., • Ensure Preventative Maintenance is completed and spare parts inventories are maintained., • Pull required fixtures, holding devices and materials, as required., • Minor repairs of machine within capability., • Ensure all documentation is completed properly including, computer logs, maintenance logs and accountability logs. Other Important Responsibilities: • Must be able to operate assigned equipment safely and efficiently., • Must be able to keep record of time spent and materials used., • Must be able to use precision measuring tools and equipment, read schematics, and is familiar with common measuring tools., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • Must maintain adequate levels of performance and motivation despite job tasks that are routine, repetitive and/or non-stimulating., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 5 years or more of relevant experience, • High School or GED Diploma required, Technical School Certification/Degree Preferred, • Ability to independently troubleshoot mechanical and electrical problems using schematics and diagnostic equipment., • Must have knowledge of mathematical skills with all units of measure, using whole numbers, common fractions and decimals, • Must be capable of programming, setting up and maintaining various equipment, • Competencies with pneumatic technology and hydraulics, • Must be able to work with limited supervision and function as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved, • Must hold themselves accountable for doing whatever is needed to meet customer commitments, • Must be able to understand and carry out oral and written directives, • Must have the ability to work under pressure and to adhere to deadlines and to have the ability to be flexible, • Task oriented, ability to prioritize work load, • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative Physical requirements and work environment: • Must be able to lift 50 lbs, • Must be able to sustain physical work for up to 12 hours per day including the following:, • Standing for up to 12 hours per day, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Shop noise levels are such that protective ear-coverings are recommended, • Short notice, overtime and some weekend demand according to production needs CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure: CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: The Engineering Technician plays a critical hands-on role in supporting manufacturing operations by partnering with Production and Engineering teams to maintain stable, efficient, and well-documented processes. This role supports yield improvement, defect reduction, and continuous improvement initiatives through data collection, root-cause analysis, documentation, and training support. The ideal candidate is detail-oriented, proactive, and comfortable working on the production floor while collaborating across departments to solve problems and improve process performance. Key Responsibilities: · Provide daily, order level support to production teams to ensure operational needs, quality standards, and delivery goals are met. · Act as a technical liaison between Engineering and Production to support troubleshooting, process clarification, and execution consistency. · Collect, analyze, and report defect and process data to support yield improvement and quality initiatives. · Assist with root cause analysis and corrective action implementation for process, equipment, or quality issues. · Support timely corrective action responses for assigned projects and production issues. · Support training of operators and technicians to ensure consistent process execution and adherence to standard work. · Assist Engineering with knowledge transfer during new equipment introductions or process changes. · Escalate unresolved process or equipment issues with clear data and recommendations. · Support Engineering Change Notices (ECNs) through documentation updates, training, and production rollout support. · Apply structured problem-solving methods to identify root causes and support sustainable corrective actions. · Analyze and troubleshoot production issues, recommending data‑driven improvements to process parameters and operating methods to improve yield and reduce waste. · Support engineering experiments and trials by monitoring processes, collecting and analyzing test data, and delivering clear test summary reports. Other Important Responsibilities: · Engage and support companywide safety and cleanliness programs · As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices · Will be required to perform other job functions, as assigned Qualifications: · Minimum 3 years of direct experience in industrial/manufacturing environment · High School or GED Diploma required, Technical School Certification/Degree Preferred · Strong written and verbal communication skills with the ability to work effectively across teams. · High attention to detail with the ability to self-check work for accuracy. · Excellent organizational and time-management skills; ability to prioritize work in a fast-paced environment. · Ability to accept responsibility and account for his/her actions. · High level of computer literacy using MS Office Suite · Excellent problem-solving skills and conceptual thinking. · Experience supporting continuous improvement, Lean, or Six Sigma initiatives · Comfortable working on the production floor in a hands-on technical support roll CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description HiFyve is hiring a Machinery Technician in the Heavy Equipment Industry across multiple locations! Salary: $35.00 – $43.00/hr Location: Onsite Schedule: Full-time, 7am - 3:30pm M-F Job Duties and Responsibilities: • Perform high-quality repairs and preventative maintenance on Caterpillar and non-Caterpillar construction equipment, • Diagnose and troubleshoot mechanical, electrical, and hydraulic systems with limited supervision, • Disassemble and reassemble components, engines, transmissions, and hydraulic systems according to specs, • Document inspections, diagnostics, and completed repairs in compliance with Foley procedures, • Assist with parts research and ordering; communicate directly with parts department, • Maintain clean, organized workspaces in compliance with contamination control and HAZMAT safety standards, • Adapt to new technologies, diagnostic tools, and repair techniques as needed, • Ensure tools and equipment are properly secured at the end of shift Education Requirements: • High school diploma or GED required, • Technical certifications or relevant vocational training preferred Knowledge, Skills, and Abilities: • Experience with Cat and non-Cat construction equipment preferred, • Strong mechanical, electrical, and hydraulic troubleshooting ability, • Computer literacy required; familiarity with SIS Web and ET is a plus, • Excellent communication and interpersonal skills, • Ability to multitask and support a high-performing service team, • Committed to safety, accuracy, and continuous learning If you are interested, please apply!

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Company LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • Base salary of $130K - $155K, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE. As Area Service Manager, you will be responsible for the traditional mechanical service component of the integrated ODR business including preventative maintenance, fixed price work orders, reactionary T&M and service projects performed by technicians through an assigned staff of service coordinators, associate area service managers and service technicians. Some examples of the work you might do includes: • Assumes responsibility for achievement of their area sales and operational gross profit and cash management goals., • Assumes the responsibility for maintaining and retaining ODR customer relationships through quality of service, timely execution and proper staffing., • Manages staff to maximize pull through opportunities and margins from captive accounts., • Manages maintenance contract execution for timeliness, quality and profitability through proper pre-planning, staffing and scheduling so as to minimize non-productive and/or idle time., • Renews maintenance contracts within the given service area at target escalation and pricing levels to successfully meet the target margins of the Company., • Develops excellent customer relationships by positioning the company to be the first call, “go-to” trusted source for technical service and maintenance needs., • Maintains high visibility with customers and makes frequent visits in support of the account objectives., • Ensures the service team plans and manages work with a unique understanding of the customer’s ongoing operations in mind resulting in minimal disruption to the customer’s business objectives., • Partners with the service coordinator and field operations staff to plan out daily and weekly manpower and technician needs to support the customers., • Understands the company’s broader MEP solutions capabilities outside of service and actively collaborates across the branch to ensure a seamless customer experience and capture additional wallet share through the deployment of personnel and/or staff needed to propose the branch’s full suite of sales offerings., • Collaborates with Account Executives, Account Managers, Sales Representatives, Special Projects Managers and major project operations teams to ensure client needs are met., • Participates in strategic account planning designed to increase recurring revenue from captive accounts, • Ensures all purchasing is completed in a timely and cost-effective manner., • Possesses strong financial acumen and command of departmental profitability., • Maintains the accuracy of all business records, reports, logs, and data, and submits regular reports to management to communicate booking/selling activity within a specified time frame., • Ensures all work is billed promptly upon completion or per the terms of appropriate contract documents., • Monitors payment of customer invoices and follows up on all departmental receivables over 60 days past due., • Hires, trains, and develops staff capable of performing the work required to meet customer commitments., • 4+ years of related employment experience required., • Advanced knowledge of the HVAC/controls industry required., • Strong attention to detail and ability to multitask in a fast-paced environment., • Intermediate level computer skills, including proficiency with Microsoft Office (Excel in particular)., • Capacity to leverage communication/interpersonal skills to develop and enhance business relationships., • College degree or advanced education preferred., • Previous experience in a mentor, supervisory, or management role is a plus., • Familiarity with back of house facilities maintenance staff personnel and operations., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates primarily in a professional office environment, and routinely utilizes standard office equipment, such as computers, phones, copiers, and filing cabinets., • In performing the duties of this job, the incumbent is regularly required to walk, talk, stand, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary work position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job DescriptionWhy You’ll Love this Veterinary Technician Job! Are you looking to grow a successful career based on your love for animals? When you join Fanwood Animal Hospital, an EverVet Partner, you will be welcomed into a supportive community motivated by the genuine desire to make a meaningful difference for pets and their owners. As a critical member of our team, our Veterinary Technicians enable us to deliver excellent service and top-quality care to our clients. You will directly support veterinarians in medical and surgical procedures and may independently handle appointments when veterinary oversight is not necessary. If you are ready to join a dynamic team where quality animal care is valued at the highest level, apply for the Veterinary Technician position today! Pay Range: $18-$21 / hour Benefits: • Paid Time Off, • Medical, Dental, Vision with a Health Savings Account*, • Employee Assistant Program available 24 hours a day, 7 days a week*, • Supplemental Life Insurance & AD&D Insurance*, • 401K Plan with Generous Employer Match, • Maternity Leave *, • Bereavement Leave, • Life, Short Term, & Disability Insurance*, • Discount Programs, • Discounted Veterinary Care, • On-Demand Pay Options, • Referral Bonus Career Enhancement Benefits:, • The opportunity for full tuition payment to attend Penn Foster's veterinary technician program*, • Access to Zoetis Clinical & Professional Program and Events, • Restrain/hold animals of several species for examination and treatments, • Assist in treatment of patients in concert with a doctor, • Get weights on all patients prior to examination, • Use our radiology software for medical records and submission of studies for review, • Take digital photos of procedures/relevant lesions and save to patients' medical records, • Run in-house laboratory specimens and record results in patient medical records, • Prepare laboratory forms/specimens for out-of-office laboratories (Antech and others), • Import laboratory and radiographic data into patient medical records, • Manage and oversee medical treatments (including collecting laboratory samples, administering SQ fluids, placing IV and urinary catheters, expressing anal sac, etc.), • Administer and oversee anesthesia, surgical and dental treatments under the direction of the Veterinarian, • Take high quality digital radiographs, • Complete all relevant medical records entries for patients, • Ensure that all patients are comfortable, fed, watered and clean, • Bathe animals as necessary (both therapeutic and general), • Keep accurately and timely logs for controlled drugs, • Setup medications/fill prescriptions when needed, • Help monitor inventory, rotation and expiration dates and report needs as requested, • Assist in stocking exam rooms/treatment/surgery/radiology rooms as necessary, • Assist in ordering of food/supplies/medications as requested, • Assist in maintenance of areas both inside and outside of hospital (floors, walks, parking, runs, etc.) Required Skills, • High School Diploma, GED, or suitable equivalent, • Associate’s degree in a related field preferred, • Veterinary Assistant Certification preferred, • At least one to two years’ experience preferred, • Experience handling a variety of animals, • Strong customer service skills, • Ability to communicate effectively, • Ability to lift up to 50 pounds, • Basic math and writing skills, • Ability to express compassion, • Advanced understanding of diseases/medications/anesthesia, • Understanding of vaccinations, basic laboratory tests, common diseases and pet behavior, • Knowledge of computer software (Infinity and Office programs)

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description BEUMER Corporation is expanding its value services for our Conveying & Loading Customers in North America by providing for additional capacity for the installation, commissioning, maintenance and support of all the BEUMER conveying systems and equipment in a customer’s facility. Our main goals and objectives are safety and to maximize uptime at best possible value. These systems include BEUMER Overland Conveyor Systems, AFR, and traditional Heavy duty Conveying equipment. BEUMER Corporation is looking for an experienced Field Service Technician in order to support these technologies. General Responsibility The Field Service Technician is a hands-on leadership role requiring strong mechanical and electrical expertise, along with experience in heavy conveying systems and maintenance operations. The ideal candidate brings solid technical knowledge, a deep understanding of system technology, and the interpersonal skills needed to communicate effectively and support team success. With the team, you will utilize on site and hands on training and partnering to expand your technical skills as you support critical materials handling systems and their operations. The focus will be on gaining expertise on the latest technology being presently implemented in these facilities. Must be able and willing to travel up to 80% of the time. Primary Responsibilities The Field Service Technician performs and manages the installation, commissioning, service and support of the critical BEUMER system. Your primary objective is to provide supervision and excellence for the installation and support of these systems. The Field Service Technician has advanced technical capabilities and experience, can perform and train on all of the duties required for the maintenance, troubleshooting, monitoring and reporting of these systems. The Field Service Technician is responsible for the following: • Understanding customer requirements and how they translate into operational and functional requirements of the systems., • Access and troubleshooting of electro-mechanical components, including IO cabling and network components., • Effective communication with Customers and Internal technical resources to aid resolution, • Provide accurate and timely written reports of operational and maintenance issues., • Interpret data and suggest maintenance schedule/activity adjustments Operate systems and components to demonstrate equipment and to analyze malfunctions, • Inspects, determine, oversee and perform corrective, emergency and preventative maintenance of the conveying systems and its associated components, • Analyze and review findings to determine source of problem, and recommends repair, replacement, or other corrective action as well as coordinate problem resolution with engineering, customer service, and other personnel to expedite repairs., • Interprets maintenance manuals, schematics, and wiring diagrams, and repairs equipment, utilizing knowledge of electronics and using standard test instruments and hand tools., • Consults with engineering personnel to resolve unusual problems in system operation and maintenance., • Supervise workers in installation, testing, tuning, and adjusting equipment to obtain optimum operating performance., • Prepare detailed Service reports and or as-built documentation for work completed. The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications • Demonstrated capability and experience in technical disciplines and maintenance operations., • Demonstrated capability and experience in the maintenance and troubleshooting of bulk conveying systems and industrial equipment., • Demonstrated capability and experience with heavy conveyors, belting and drive systems, Electro-mechanical systems and their maintenance as well as experience in preventative maintenance., • Ability to:, • Work as part of the project team., • Use computer-based tools for communication, trouble shooting, and programming., • Quickly acquire additional technical skills for new materials handling technologies., • Be a mentor and teacher to other Maintenance personnel and operational personnel., • Handle multiple tasks and work under pressure, sense of both urgency and thoroughness., • Read schematics and diagrams., • Strong understanding of industrial power, electrical and control circuits and devices., • Strong PC skills (Windows, Word, Excel, remote capabilities)., • Good time management., • Self-motivated, trustworthy, respectful of others., • Attention to detail., • Good communication skills (both verbal and written)., • Professional, positive, and energetic attitude. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. And by the way, no waiting period, they start when you do: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most! All your information will be kept confidential according to EEO guidelines.

Job Description Job Title: Field Service Technician II Location: Woodbridge NJ USA 07095 Duration: 3 months Contract to hire Shift timings: M-F 8 am – 5 pm, on call every other week, some OT and after hours Job Description The Chick-fil-A Field Technician provides on-site technical support for restaurant operations, ensuring reliable performance of A Field Technician provides on-site technical support for restaurant operations, ensuring reliable performance of point-of-sale (POS) systems, hardware, networking components, and related technology. This role requires strong customer service skills, the ability to perform under pressure, and a commitment to delivering high sale (POS) systems, hardware, networking components, and related technology. This role requires strong customer service skills, the ability to perform under pressure, and a commitment to delivering high quality technical solutions in a quality, technical solutions in a fast-paced restaurant environment. Key Responsibilities Provide exceptional customer service while supporting restaurant operators and staff. Install, maintain, analyze, troubleshoot, and repair POS systems, hardware, peripherals, and related equipment. Resolve technical issues efficiently and clearly communicate solutions to customers. Document work performed, maintain system configurations, and execute hardware/software upgrades or replacements. Perform light contractor work such as drilling, mounting hardware, and running cabling as needed to complete installations or repairs. Train restaurant employees for proper use of supported systems and equipment. Diagnose and repair product failures; order and replace parts as needed. Recommend appropriate products, services, or solutions based on customer needs. Apply working knowledge of kitchen operations and backend workflows to ensure seamless technology integration. Follow established procedures and guidelines while working with minimal to no supervision. Report to a Team Lead or Field Services Manager. Requirements Strong customer service and communication skills, with the ability to remain calm under pressure. Experience troubleshooting and repairing POS or computer hardware systems preferred. Basic understanding of networking concepts and restaurant technology environments. Ability to perform light physical/contractor tasks (drilling, mounting, etc.). Willingness to work evenings and participate in an on-call rotation as needed. Reliable transportation for travel between customer locations. Completion of Chick-fil-A specific training and network cable termination training. Must pass the Chick-fil-A certification exam to be eligible for field dispatch. -What are the TOP 2 required skills that candidates must have? 1. PEOPLE SKILLS 2. ATTENTION TO DETAIL • What will the work schedule be for this position? M-F 9AM-6PM FLEXIBLE WITH OVERTIME AND AFTERHOURS • Will there be OC (on call)? YES, • Will there be shift differentials? NO, • How many overall years of experience should this person have? 2-4, • If contract to hire what is the conversion rate? $24.00, • How many miles per day will the contractor be driving? 0-100, • What radius range should candidates be located from the job location? 15-25 miles (New Jersey residents only), • What is the exact work location or city, state, or zip? Woodbridge, NJ 07095

Job Description About CompoSecure Founded in 2000, CompoSecure is a technology partner to market leaders, fintechs and consumers, enabling trust for millions of people around the globe. The company combines elegance, simplicity, and security to deliver exceptional experiences and peace of mind in the physical and digital world. CompoSecure's innovative payment card technology and metal cards with Arculus security and authentication capabilities deliver unique, premium branded experiences, enable people to access and use their financial and digital assets, and ensure trust at the point of a transaction. For more information, please visit and . Position Overview: With the direction of the Pre-Lam Supervisor and the support of the Pre-Lam Team Lead, the Pre-Lam Technician II (PLT II) will be responsible for performing various tasks to set up, operate, monitor, and troubleshoot, and perform preventive maintenance for assigned machines (i.e. Roll Laminators, Cutting equipment, Test Equipment, etc.). The PLT II will be responsible for inspecting parts to specifications and making adjustments or tool changes as necessary to maintain quality specifications. This position will participate in the specification, test and acceptance of additional equipment for Pre-Lam. Key Responsibilities: • Technician monitors equipment daily, performs basic cleaning, resets equipment for the next day and completes repairs for continued production., • Ability to read and follow work order operations to produce products that meet approved quality standards., • Assist in developing preventive and corrective maintenance programs., • Ensure daily, weekly and monthly periodic maintenance is completed., • Support the Lead in training of all technicians on all Pre-Lam equipment., • Properly maintains working files to ensure correct operation of equipment., • Assists the Team Lead in estimating materials, labor and equipment hours to accomplish a project., • Provides root cause analysis and resolves problems., • Maintains in-process inventory at work centers by delivering and opening materials and supplies., • Interface with scheduling to determine schedules for production., • Ensure full adherence to 5S practices at all times., • Track the achievement of production throughput against stated capacity targets., • Ensures that non-conforming material is clearly identified and segregated., • Escalate any issues to Leads immediately Other Important Responsibilities: • Engage and support companywide Safety and Cleanliness programs., • Handle related email correspondence, • Will be required to perform other job functions, as assigned. Qualifications: • A minimum 3 years (or more) of experience in a manufacturing environment, • Education, Certifications; Associate degree preferred, High School Education a must., • Proven successful history in driving organizational and departmental changes., • Experience with Visual ERP is preferred., • Excellent communication skills, both oral and written., • Strong attention to detail and ability to self-check own work., • Excellent problem-solving skills., • Microsoft Office Computer skills including solid excel skills required. Physical requirements and work environment: • Must be able to lift 50 lbs., • Must be able to sustain office work including the following:, • Sitting in an office chair, • Typing, • Reaching for the telephone, • Standing at office equipment, • Hearing for phone use, • Sight for computer use, • Must be able to sustain factory work as needed including the following:, • Standing at machinery, • Reaching and pulling to operate machinery, • Sight for machinery operation, • Walking through shop, • Office environment is of moderate noise level., • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP), • Career Advancement Opportunities Benefits eligibility and details will be shared during the hiring process. We're excited to support you in building a rewarding career with us. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

Job Description About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . Position Overview: This position executes manufacturing operations on prototype and research samples, as directed by the Prototype Lead. The technician is also responsible for documenting equipment parameters, recipes, and key attributes for completed operations. Key Responsibilities: • Perform tasks tied to sample requests, work orders, leadership, support engineering, graphics, supply chain, sales, and other internal groups as needed., • Independently execute the following operations for all product types:, • Machine set-up, shut down, and changeover, • Stamping and embedding, • Final inspection and packing, • CNC milling / engraving, • Material preparation: sub assembly/surface finishes, • Industrial inkjet, • Laser cutting, • Tacking, • Lamination, • Precision leveling, • Laser engraving, • Perform quality checks including reviewing current part with proof for product accuracy, • Understand expectations of work instruction set, • Document all parameters and processes for future repeatability, • Ensure high quality of all products while continually verifying accuracy of settings, • Record processing/quality issues and resolution, • Elevate to manager any manufacturing or equipment concerns, • Coordinate with other team members within the prototype group, • Maintain inventory and retain control, • Update project status tracking software, • Identify and understand various materials used in build, • Work with team to match previously targeted color samples, • Assist production when necessary Other Important Responsibilities: • Timely corrective action response and resolution to relevant project situations, • Engage and support companywide safety and cleanliness programs, • Operate assigned equipment safely and efficiently, • Perform miscellaneous duties as assigned Qualifications: • Minimum 3 years of work experience, • Associate degree in related field preferred, • Enthusiastic attitude, flexible to new or changing circumstances, professional demeanor, sensitive to client needs, self-motivated, creative and innovative, • Ability to function as an active team member with limited supervision, • Excellent communication, problem solving, and time management skills, • Strong attention to detail and ability to self-check own work, • Task oriented with superior organizational skills and ability to prioritize workload, • Ability to accept responsibility and account for own actions, • Capable of understanding and carrying out oral and written directives, • Computer literacy including working knowledge of Microsoft Office applications, • Medical, Dental & Vision Coverage, • Flexible Spending Accounts (FSA), • Company-Paid Life and Disability Insurance, • 401(k) with Company Match, • Paid Time Off & Paid Holidays, • Annual Bonus Opportunities, • Employee Assistance Program (EAP) Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to . CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans.

National Church Residences - - Responsibilities: Perform routine and preventive maintenance on HVAC, plumbing, electrical, and safety systems; Diagnose and repair mechanical, electrical, and plumbing issues; Supervise and train junior maintenance staff; Manage inventory and order supplies; Document

Plastipak - - Responsibilities: Perform maintenance for blow molding & injection molding manufacturing equipment to assure uninterrupted & optimal operations; Execute & continuously improve preventative maintenance procedures; Participate in changeovers, ensuring efficient & correct execution; Repa

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Administrative Assistant / Remote] - Anywhere in U.Competitive Pay - As a Data Entry Clerk you'll: Transfer data from various sources into the new database; Update databases or records with new information as it becomes available; Correct and modify inaccurate files and records; Comply with security

Administrative Assistant / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Data Entry Clerk at LV Petroleum, you will: Enter and maintain accurate data into company databases; Verify the accuracy of data entries for completeness and compliance with company stan

Abacus Service Corporation - - Responsibilities: Enter and verify data fields while reviewing contracts in healthcare context.

Performance Foodservice - [Maintenance Technician] As a Maintenance Mechanic at Performance Foodservice, you'll: Repair and maintain industrial equipment and machinery; Troubleshoot mechanical issues and perform preventative maintenance tasks; Ensure all equipment is operating efficiently and safely

Property Maintenance Service Technician. A successful Property Maintenance Service Technician is expected to visit properties, perform interior and exterior property maintenance. A top-level Lead Service Technician efficiently manages all service calls, providing high-quality service and maintenance

TeamLogic IT is a nationwide network of IT support services. At TeamLogic IT, we provide comprehensive computer services along with premier customer service. Responsibilities for Sales Support Specialist:.

Property Maintenance Service Technician. A successful Property Maintenance Service Technician is expected to visit properties, perform interior and exterior property maintenance. A top-level Lead Service Technician efficiently manages all service calls, providing high-quality service and maintenance

Join Our Team as a Work-From-Home Data Entry Research Panelist!.Are you ready to earn money from the comfort of your own home? This exciting opportunity is perfect for anyone with a variety of skills and backgrounds whether you've been an administrative assistant, data entry clerk, typist, customer

Provides support to facilities mechanics and associates that are responsible for facilities activities and support of maintenance of all manufacturing equipment, tools and support equipment to realize a company profit. Develops, schedules and carries out all routine general maintenance and repair of

Join our team at Lincoln Tech in South Plainfield, NJ where we're searching for a dedicated Facilities Maintenance professional to maintain the high standards of our facilities.This role involves timely response to work orders, addressing maintenance issues, and completing assigned projects efficien

Orders parts/supplies using computer-based procurement system. Proficient using the following computer programs: Outlook, Microsoft Word, Microsoft Excel. Under direction of facility leadership, the Maintenance Technician Lead performs all maintenance functions, including but not limited to preventi

Basic computer skills and comfort using various software, apps and computer programs. Plus, many other programs to support career development and growth. To support your growth, after your 12-month work anniversary, you'll be eligible to earn your EPA 608 Universal Refrigerant Certification,.