Conduit jobs in Irvington, New JerseyCreate job alerts

Job Description Solar Foreman / Project Manager – Lead Utility-Scale & Commercial PV Installations with PSG Energy Services Job Overview: • Company: PSG Energy Services, • Salary/Pay Rate: $95,000 to $105,000 per year, • Location: Nationwide Travel, • Job/Employment Type: Full Time, • Project Scope: Commercial and Utility-Scale Solar PV Projects, • Mandatory Licenses & Certifications: Valid Driver's License The Opportunity: You will serve as the primary on-site leader managing commercial and utility-scale solar PV installations nationwide. This hands-on role gives you complete site ownership to direct subcontractors, solve complex engineering challenges, and ensure high-quality execution from mobilization through commissioning. How You Will Make an Impact: • Field & Project Management, • Serve as the primary on-site representative for solar construction projects., • Manage daily construction activities from mobilization through substantial completion and closeout., • Direct and coordinate subcontractors, electricians, equipment operators, testing contractors, and other trades., • Develop and manage daily and weekly work plans to maintain the project schedule., • Track manpower, production, equipment, deliveries, and overall construction progress., • Identify schedule risks and field issues early and develop corrective action plans., • Coordinate site activities with the Project Manager, engineering team, customer, utility, AHJ, and other stakeholders as required., • Lead daily subcontractor coordination and planning meetings., • Maintain accurate daily reports, progress photographs, manpower counts, and construction documentation., • Review subcontractor work against contract scope and identify out-of-scope work or potential change-order conditions., • Assist with project turnover, punch lists, commissioning, inspections, and final closeout., • Solar Construction, • Supervise installation of commercial rooftop, carport, and ground-mount PV systems., • Understand and oversee:, • PV module installation, • Ballasted and mechanically attached rooftop racking, • Ground-mount racking and foundations, • DC string wiring and wire management, • Combiner boxes and DC equipment, • Inverters and power conversion equipment, • AC collection systems, • Disconnects and switchgear, • Transformers, • Underground conduit and trenching, • Grounding and bonding, • Equipment pads and foundations, • Communications and monitoring systems, • Rapid shutdown systems, • Verify equipment installation meets manufacturer requirements, approved drawings, specifications, and applicable codes., • Understand equipment clearances, mounting requirements, environmental requirements, conduit entry requirements, sealing, drainage, and equipment protection., • Perform or oversee basic electrical and mechanical troubleshooting., • Coordinate startup, commissioning, testing, and utility/PTO activities., • Safety Responsibilities, • Maintain a strong safety culture and enforce all company and site-specific safety requirements., • Conduct daily pre-task planning and Job Hazard Analysis/JSA meetings., • Verify subcontractors are following approved safety plans and procedures., • Identify unsafe conditions and immediately stop work when necessary., • Understand electrical hazards associated with energized PV systems., • Maintain appropriate OSHA documentation and site safety records., • Coordinate LOTO procedures when required., • Understand fall protection, excavation safety, equipment operation, electrical safety, and PPE requirements., • Immediately document and report incidents, near misses, property damage, and safety concerns., • Quality Control, • Inspect work continuously rather than waiting until project completion to identify deficiencies., • Verify construction against:, • IFC drawings, • Electrical one-lines, • Equipment layouts, • Structural drawings, • Manufacturer installation manuals, • Project specifications, • NEC requirements, • Approved submittals, • Maintain project punch lists and ensure deficiencies are corrected promptly., • Verify proper equipment mounting, torque requirements, grounding, wire management, labeling, conduit installation, weatherproofing, and sealing., • Document concealed work before it is covered., • Maintain photographs and records sufficient to document construction quality., • Coordinate required testing and commissioning documentation. Required Qualifications & Experience: • 5+ years of commercial or utility-scale solar construction experience preferred., • Previous experience as a Solar Foreman, Superintendent, Assistant Superintendent, Construction Manager, or Solar Project Manager strongly preferred., • Strong understanding of commercial PV electrical and mechanical installation., • Ability to read and interpret:, • Construction drawings, • Electrical one-lines, • Three-line diagrams, • Site plans, • Equipment layouts, • Structural details, • Manufacturer installation manuals, • Project specifications, • Working knowledge of the National Electrical Code (NEC) as it applies to solar PV installations., • Understanding of AC and DC electrical systems., • Knowledge of commercial solar inverters, disconnects, switchgear, transformers, racking systems, and monitoring equipment., • Ability to identify improper installation methods and quality issues., • Strong construction sequencing and scheduling skills., • Experience managing subcontractors and field crews., • Ability to manage multiple trades and work activities simultaneously., • Strong troubleshooting and problem-solving abilities., • Ability to make sound field decisions while recognizing when engineering or management approval is required., • Strong written and verbal communication skills., • Ability to communicate professionally with customers, subcontractors, inspectors, engineers, utilities, and internal management., • Comfortable using computers, tablets, email, Microsoft Office, PDF drawings, and construction/project-management software., • Ability to maintain organized project documentation. Preferred Qualifications & Experience: • OSHA 30 certification., • NFPA 70E training., • First Aid/CPR certification., • NABCEP certification or solar-specific training., • Electrical background or electrical license., • Experience with commercial rooftop and ground-mount solar., • Experience with SolarEdge, CPS, APS, or similar commercial inverter platforms., • Experience with IronRidge, EcoFoot, Unirac or similar racking systems., • Experience coordinating utility interconnections and commissioning., • Experience operating or supervising operation of forklifts, telehandlers, skid steers, lifts, and other construction equipment. Leadership Expectations The Solar Foreman / Project Manager is expected to take ownership of the job site. The successful candidate must be able to: • Lead crews and subcontractors firmly and professionally., • Hold subcontractors accountable for schedule, quality, safety, and workmanship., • Anticipate problems instead of simply reporting them after they occur., • Develop solutions to field problems and communicate them quickly., • Keep management informed of project status, risks, delays, and major decisions., • Protect completed work and owner property., • Maintain an organized and professional job site., • Understand when field changes require engineering approval., • Represent the company professionally with customers and project stakeholders., • Remain productive and organized while working independently with limited day-to-day supervision. Travel Requirements Extensive nationwide travel is required for this position. • Candidate should expect to travel approximately 50-75% of the time, depending on project workload., • Projects may require being away from home for multiple consecutive weeks., • Overnight stays and extended project assignments are expected., • Some weekend travel may be necessary based on project schedules., • Must have a valid driver's license and acceptable driving record., • Must be comfortable traveling by vehicle and commercial airline., • Must be flexible regarding project location and changing construction schedules. Physical Requirements • Ability to work outdoors in varying weather conditions, including heat and cold., • Ability to walk active construction sites and uneven terrain for extended periods., • Ability to climb ladders and access commercial rooftops when required., • Ability to safely lift and carry construction materials and equipment as necessary., • Ability to work around heavy equipment and active electrical construction., • Ability to perform work at heights while using required fall-protection equipment. Compensation & Benefits: • Competitive pay package tailored to field experience., • Performance-based and project completion bonuses., • Per diem and travel expense coverage for nationwide project assignments., • 401(k) retirement savings program with employer matching., • Comprehensive medical, dental, and vision insurance coverage., • Health Savings Account (HSA) and life insurance options., • Paid time off including paid holidays, vacation, and sick leave., • Provided safety equipment along with ongoing OSHA and technical certifications. About Us: PSG Energy Services specializes in commercial, industrial, and utility electrical and renewable energy solutions. We pride ourselves on being creative and adaptable problem-solvers who focus on driving measurable success for our clients. Learn more about our team and projects at https://www.psg-energy-services.com/ PSG Energy Services is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Description \n At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. \n \n Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! \n \n Travel: \n This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. \n \n As a Distribution Engineer / Designer, you can expect to: \n\n • \n Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers \n • \n Review work provided by Client and assess requirements of scopes. \n • \n Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker. \n • \n Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. \n • \n Conduct root cause analysis of outages and mitigation using engineering principles and design \n • \n Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications \n\n \n What Sets You Apart (Background Requirements): \n\n • \n 2+ years of prior relevant experience is required. \n • \n Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree \n • \n Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation \n • \n Experience with utility reliability projects \n • \n Ability to demonstrate proficiency with the NESC \n • \n Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates) \n • \n Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages \n • \n Candidates should possess valid U.S. driver's license, as some local or regional travel is expected \n\n \n Nice to Haves: \n\n • \n Previous QAQC experience \n • \n Experience providing estimated costs, development of a BOM, calculating the CIAC \n • \n Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc \n • \n Experience with the Work Management System CREWS \n • \n Relevant management or leadership experience \n\n \n Professional Attributes that will help you succeed in this role: \n\n • \n Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy \n • \n Collaborative and inclusive of individuals of diverse backgrounds and geographic locations \n • \n Positive attitude \n • \n Ability to work with limited supervision \n • \n Professional dress and demeanor \n • \n Attention to detail & Highly organized \n • \n Excellent time management \n\n \n At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. \n As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. \n \n PDSDLINE \n PowerDelivery \n If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:September 3, 2026\n\n \n \n \n \n \n \n \n For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. \n \n \n \n \n \n \n\n\n Pay Range:Pay Range $59,150.00 - $106,925.00\n \n The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. \n \n About Leidos \n \n Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit www.Leidos.com. \n \n Pay and Benefits \n \n Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at www.leidos.com/careers/pay-benefits. \n \n Securing Your Data \n \n Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. \n If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. \n \n Commitment to Non-Discrimination \n \n All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. \n #Remote

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! Wachter is accepting applications for Low Voltage Lead Project Technicians for large scale project work at various locations across the United States. This position requires technicians to travel up to 95% of the time. We seek self-motivated and reliable technicians for service and special installation projects, who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Benefits Package: Company Paid! • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings., • Per-Diem paid when overnight travel is required., • Drive time and mileage paid for use of a personal vehicle when travel is required., • Company vehicle could be provided after initial 2-4 weeks of employment.Requirements:, • Electronic Security Technician License (EST) required., • Experience as a Data Cable Technician., • Available for extensive travel nationwide., • Strong knowledge of industry standards (BICSI, NEC, TIA/EIA)., • Industry-specific certifications (BICSI, Systimax, Panduit, Beldon, Corning) are a huge plus., • Capable of reading blueprints and site maps., • Experience in CCTV, voice, and data cabling is a plus., • Excellent customer relationship and communication skills; verbal and written., • Must be comfortable working unsupervised and also effectively communicating and collaborating with teams of 4 to 20 other technicians., • Knowledgeable in identifying independent colors and learning color codes., • Ability to work in cramped spaces., • Ability to operate a BOOM or scissor lift; and ability to work at heights, of 40 plus feet., • Has basic telecommunication tools, PPE, and reliable transportation., • Must have knowledge of cabling infrastructure., • Experience in conduit installation is a plus., • Valid driver's license with a clean driving record; no DUI or DWI in the last three years.Responsibilities:, • Installation, troubleshooting, and maintenance of various cabling infrastructure., • Run low voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Ensuring all cables are neatly tied and bundled according to safety regulations., • Installing of cable support structures such as j-hooks, cable racks, and innerduct., • Repairing cable poles and towers., • Conduct tests to ensure all newly installed cables systems and component devices are operational., • Troubleshoot issues with the cable network., • Perform any other duties not specifically stated herein, but which your supervisor may assign., • Maintain the company’s high standard of quality and professionalism with regards to workmanship, customer relations, coworkers, behavior, and appearance., • Adhere to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Based on experience.About: Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Summary AB Facility Service is seeking an experienced Commercial Route Service Journeyman Electrician to perform electrical service, troubleshooting, repairs, maintenance, and installations at commercial properties. The ideal candidate must be able to independently diagnose electrical issues and complete service calls efficiently and professionally. Key Responsibilities • Perform commercial electrical service, repairs, installations, and preventive maintenance., • Troubleshoot electrical panels, breakers, disconnects, transformers, motors, controls, lighting, and distribution systems., • Troubleshoot 120V, 208V, 240V, 277V, and 480V single- and three-phase systems., • Install and troubleshoot EMT conduit, wiring, electrical devices, and equipment., • Perform electrical testing using multimeters, clamp meters, and other diagnostic equipment., • Read and interpret electrical blueprints, schematics, wiring diagrams, and one-line diagrams., • Troubleshoot electrical components associated with commercial HVAC and mechanical equipment., • Respond to commercial service calls and manage multiple locations throughout an assigned route., • Communicate professionally with customers, building engineers, and facility managers. Qualifications • Journeyman Electrician License required., • 5+ years of commercial electrical experience preferred., • Strong commercial service and electrical troubleshooting experience., • Experience with power distribution, panels, breakers, conduit, wiring, lighting, motors, and controls., • Strong understanding of single- and three-phase electrical systems., • Ability to diagnose electrical problems independently., • Ability to read electrical drawings and schematics., • Experience with commercial HVAC electrical systems is a plus., • Valid driver's license and ability to travel between commercial locations., • Strong customer service and communication skills.

Description \n At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. \n \n Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! \n \n Travel: \n This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. \n \n As a Distribution Engineer / Designer, you can expect to: \n\n • \n Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers \n • \n Review work provided by Client and assess requirements of scopes. \n • \n Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker. \n • \n Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met. \n • \n Conduct root cause analysis of outages and mitigation using engineering principles and design \n • \n Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications \n\n \n What Sets You Apart (Background Requirements): \n\n • \n 2+ years of prior relevant experience is required. \n • \n Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree \n • \n Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation \n • \n Experience with utility reliability projects \n • \n Ability to demonstrate proficiency with the NESC \n • \n Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates) \n • \n Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages \n • \n Candidates should possess valid U.S. driver's license, as some local or regional travel is expected \n\n \n Nice to Haves: \n\n • \n Previous QAQC experience \n • \n Experience providing estimated costs, development of a BOM, calculating the CIAC \n • \n Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc \n • \n Experience with the Work Management System CREWS \n • \n Relevant management or leadership experience \n\n \n Professional Attributes that will help you succeed in this role: \n\n • \n Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy \n • \n Collaborative and inclusive of individuals of diverse backgrounds and geographic locations \n • \n Positive attitude \n • \n Ability to work with limited supervision \n • \n Professional dress and demeanor \n • \n Attention to detail & Highly organized \n • \n Excellent time management \n\n \n At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. \n As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. \n \n PDSDLINE \n PowerDelivery \n If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:September 3, 2026\n\n \n \n \n \n \n \n \n For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. \n \n \n \n \n \n \n\n\n Pay Range:Pay Range $59,150.00 - $106,925.00\n \n The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. \n \n About Leidos \n \n Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit www.Leidos.com. \n \n Pay and Benefits \n \n Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at www.leidos.com/careers/pay-benefits. \n \n Securing Your Data \n \n Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. \n If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. \n \n Commitment to Non-Discrimination \n \n All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. \n #Remote

Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Thea Energy is seeking a highly skilled and hands-on Electrical Technician to support the Manufacturing team in the construction, installation, and testing of electrical systems for the Eos Stellarator. The successful candidate will work directly alongside Senior Power Systems Engineers, Power Electronics Engineers, and Hardware Design Engineers to bring advanced power concepts from design to reality. This role requires a versatile technician who can seamlessly transition between supporting the build of high-current power supplies, assembling electrical distribution panels, and executing the physical installation of facility infrastructure. The technician will play a critical role in the hardware bring-up, debugging, and overall electrical integration of a cutting-edge fusion energy system. Key Responsibility Areas: • Assembly & Prototyping: Build and wire power supplies, energy storage systems, custom embedded control boards, and high-current AC-DC converters for HTS magnets., • Infrastructure Installation: Support the physical installation and cabling of MV/LV switchgear, transformers, distribution panels, and Battery Energy Storage Systems (BESS)., • Facility Support: Assist in integrating auxiliary electrical systems and balance-of-plant (BoP) infrastructure, providing electrical connections for cryogenics, vacuum, cooling, and HVAC systems., • Testing & Validation: Set up testbeds and perform hardware bring-up, signal probing, and parameter optimization under staged load conditions., • Hardware Debugging: Perform board-level debugging, soldering, and rework on custom printed circuit boards (PCBs)., • Documentation: Read, interpret, and provide field markups for single-line diagrams, schematics, wiring diagrams, and cable schedules. Ideal Experience & Skillsets: Required Qualifications • Associate's degree, trade school certification, or equivalent practical experience in Electrical Technology, Electronics, or a related field., • 5+ years of hands-on experience as an electrical technician in industrial, R&D, or high-power environments., • Proven experience building, wiring, and installing electrical distribution panels, power supplies, and control cabinets., • Strong ability to read and interpret engineering drawings, including schematics, P&IDs, and single-line diagrams., • Proficiency with lab measurement tools, including oscilloscopes, multimeters, and electronic loads., • Strong understanding of strict electrical safety standards, including LOTO protocols and NFPA 70E / NEC. Preferred Qualifications • Experience operating in fusion, accelerator, or specialized industrial R&D environments., • Familiarity with high-voltage and medium-voltage distribution equipment (transformers, protective relays, switchgear)., • Hands-on experience with PCB rework, fine-pitch soldering, and analog/mixed-signal circuit troubleshooting., • Familiarity with mechanical integration, including cable trays, conduit bending, heat sink layouts, and cooling solutions. Tools & Platforms • Measurement & Lab Tools: Oscilloscopes, multimeters, power analyzers, signal generators, logic analyzers, and electronic loads., • Assembly Tools: Soldering stations, crimpers, wire strippers, and general hand/power tools for mechanical integration., • Documentation: Microsoft 365, SharePoint, JIRA, and familiarity with navigating CAD outputs (AutoCAD Electrical, EPLAN). Company Benefits: • Base Pay Range: $32.00 – $55.00 per hour (Non-Exempt / OT Eligible), • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO Requirements: • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics. It's not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world's hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran's status, or other characteristic protected by applicable laws and regulations.

Job Description Job Description: Electrical Maintenance Technician Location: Hillside, NJ Reporting shift: 3rd shift (primary) About Ronald Mark Associates www.ronaldmark.com Founded in 1974, Ronald Mark Associates (RMA) emerged to connect businesses suffering from resin shortages with reliable material suppliers. Since then, we’ve steadily evolved from a trading and PVC resin distribution operation into a multifaceted manufacturer of vinyl membranes, decorative surfaces, and technical textiles while staying true to our family-owned roots. POSITION OVERVIEW: Electrical maintenance technician is responsible for carry out installations, maintenance and repairs on electrical systems and electronics features of industrial equipment and machines. Responsible to ensure safe and efficient operation of electrical machinery and systems. Work collaboratively in maintaining and implementing innovative control systems for different machinery applications in thermoplastic manufacturing. Drive strategic projects in keeping manufacturing reliable and efficient across traditional automation and newer data / AI-driven tools. JOB DUTIES: Perform routine inspections and preventive maintenance on electrical systems and equipment. Perform replacement on diagnosed faulty electrical elements of machine including motors, relays, and switches; and set-up sensing mechanism, utilizing hand tools. Carry out diagnosis and correct or replace malfunctioning electronic units like the printed circuit boards Carry out diagnosis and ensure replacement of pneumatic, mechanical, hydraulic components of equipment and machines which are faulty. Set up power supply, conduit, and wiring for currently installed equipment and machines, including programmable controllers, while adhering to blueprints, electrical ethics, utilizing voltage tester and hand tools. Testing and validating a control system change before full deployment. Maintaining records of all maintenance and repair works on Brightly asset management system. Build and implement routine and predictive maintenance schedules for electrical, automation and mechanical hardware to reduce downtime Provide technical support and training to the operators / end-users for existing equipment and new equipment. Make repairs to production equipment as required or directed. Perform preventative maintenance as assigned. Maintain a safe and orderly production equipment area. All other duties as assigned by the Plant Engineer. SUCCESS METRICS: Equipment uptime and downtime reduction Successful commission of new equipment Reduction in unplanned production stoppages Accuracy of control system documentation PREFERRED POSITION QUALIFICATIONS: At least 3 years of proven work experience as an Electrical Maintenance Technician in a manufacturing environment with outstanding troubleshooting and technical aptitude. High school diploma or equivalent. Completion of an electrical apprenticeship is preferred. Certification as an Electrical Technician is a plus. Excellent knowledge of electrical systems and wiring. Proficient in the National Electrical Code and local regulations. Basic knowledge in automation controls - ability to follow basic PLC code, ladder logic and sensor setups. Physical fitness and the ability to lift and move heavy equipment. Ability to work collaboratively in a team-oriented environment with a self-starter attitude. Ability to work under stress and ascend stairs and ladders. Effective communication skills, both verbal and written. Ability to interact well with superiors and team members. Willingness to work a flexible schedule.

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package- Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security and life safety environments: Fire Alarm and/or Intrusion., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • Knowledge of cabling infrastructure and conduit installation, • NICET Level 2 certification or State-required licenses., • Ability to identify independent colors and learn color codes., • Experience with multiple Intrusion and Fire system manufacturers. Join our team and earn up to a $15,000 signing bonus based on experience and licenses, plus extra pay incentives for night shifts! Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are seeking a Principal Magnet Cryogenics Engineer with over 10-15 years of industry experience to lead the complete program lifecycle—from concept through commissioning—of large-scale cabled High-Temperature Superconducting (HTS) magnet systems for next-generation fusion reactors. In this role, you will hold end-to-end technical ownership for the cryogenic design, thermal-hydraulic modelling, forced-flow cooling distribution, and cryogenic integration of large-scale CICC (Cable-in-Conduit Conductor) or advanced stacked-tape HTS magnets. You will bridge megawatt scale cryogenic plant engineering with microscopic thermal-hydraulic magnet behaviour, leading multi-disciplinary teams through multi-million-dollar hardware deliverables. Key Responsibilities: • Program Lifecycle Ownership: Lead the complete lifecycle (Conceptual, Preliminary, Detailed Design, Qualification, Fabrication, Assembly, Commissioning, and Decommissioning) for large-scale HTS fusion magnet cryogenic systems., • Cryo-Thermal System Architecture: Design, model, and validategaseous helium (gHe), or sub-cooled liquid nitrogen (sLN2) thermal management systems tailored to high-field HTS cabled conductors (stacked HTS conductors)., • Thermal-Hydraulic Modeling: Perform dynamic thermal-hydraulic analysis, transient load modelling (nuclear heating, AC losses, eddy currents, ramp rates), and margin calculations under operational and fault conditions., • Quench & Fault Management: Own the cryogenic response strategy during quench events, including rapid helium expansion, overpressure relief sizing, burst disc integration, and thermo-mechanical stress containment., • Large-Scale Infrastructure & Plant Integration: Define requirements for mega-watt class cryogenic plants, cold compressors, heat exchangers, sub-coolers, helium distribution boxes (valve boxes), and low-heat-leak transfer lines., • Joints & Current Leads: Oversee cryogenic thermal management for high-current demountable or permanent HTS joints and conduction-cooled hybrid (HTS/LTS) gas-cooled current leads (60+ kA)., • Vendor & Subcontractor Governance: Manage major sub-contracts for large-scale cryogenic infrastructure, conductor fabrication, pressure vessels, and vacuum insulated systems (cryostats)., • V&V and Commissioning: Plan and execute full-scale cryogenic and high-current magnet test campaigns, leading cool-down, steady-state operation, quench mitigation, and warm-up procedures.Required Experience:, • 10-15+ Years of Direct Experience in cryogenic engineering and thermal-hydraulic design for superconducting magnet systems, with a primary focus on HTS tape/cable architectures (REBCO/BSCCO)., • Large-Scale Fusion/Physics Program Delivery: Proven track record of ownership over large-scale (> $10M+) magnet work packages within fusion energy programs (e.g., W7x, ITER, JT60SA, KSTAR, DEMO) or major scientific facilities (e.g., CERN, FERMILAB)., • Cabled HTS Architecture: Demonstrated expertise in high-current (tens of kA) cabled HTS configurations (e.g., Cable-in-Conduit Conductors, stacked tape conductors) and forced-flow cooling strategies., • Full Lifecycle Track Record: Experience taking at least one major superconducting magnet or cryogenic system from initial concept through initial cool-down and operational validation., • Regulatory & Code Compliance: Deep familiarity with pressure vessel standards applied to cryogenic temperatures (ASME BPVC Section VIII, EN 13445, B31.3) and cryogenic safety standards (ISO 21010/CGA).Technical Knowledge, • HTS Material Physics: Solid understanding of critical surfaces for REBCO coated conductors, strain sensitivity, thermal margin assessment, and current sharing regimes., • Cryogenic Fluids & Thermophysical Properties: Mastery of low-temperature fluid dynamics (gHe, sLN2) using database tools., • Transient Thermal Analysis: Deep domain knowledge of AC losses (coupling, hysteresis, flux creep) nuclear volumetric heating, heat-leak budgets, and conduction/radiation thermal shielding (MLI design)., • Instrumentation & Controls: Extensive knowledge of low-temperature thermometry (Cernox, TVO, optical fibers/FBG), cryogenic flow meters, pressure transducers, and cryogenic valve telemetry.Skills & Competencies, • Computational Tools: Proficiency in finite element analysis (FEA) and thermal-hydraulic system modeling tools (e.g., COMSOL Multiphysics, ANSYS Thermal/CFD, MATLAB/Simulink)., • System Engineering & Requirements Flowdown: Capability to write clear system requirement documents (SRDs), interface control documents (ICDs), and lead major design reviews (CoDR, PDR, CDR)., • Leadership & Team Mentorship: Demonstrated ability to lead cross-functional engineering teams (structural, electrical, vacuum, systems) and mentor junior magnet/cryogenic engineers., • Strategic Risk Mitigation: Mastery of FMEA, applied to cryogenic system failures, vacuum loss (loss of vacuum/L VAC), and runaway quench scenarios.Company Benefits:, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description POSITION: Senior Account Manager REPORTS TO: VP of Sales & Marketing OBJECTIVE: This position is responsible for generating profitable revenue/gross profit in support of their assigned quota and achieving high customer satisfaction from clients while maintaining effective working relationships with other team members including Project Managers, Design Engineers, and sales administrative support. COMPENSATION: Salary, exempt (non-hourly), Commission as per Sales Compensation Plan, monthly cell phone stipend. BENEFITS: Verrex offers a comprehensive benefits package to support the health, well-being, and financial security of our employees. Benefits include: • Medical, dental, and vision insurance (VSP), • Company-sponsored 401(k) plan with matching contributions, • Company-paid life insurance and AD&D coverage ($50,000), • Long-term disability (LTD) insurance, • Optional supplemental life insurance available for purchase, • Healthcare and Dependent Care Flexible Spending Accounts (FSAs), • Access to AFLAC supplemental insurance products This benefits summary is intended as a general overview and is subject to the terms and conditions of the official plan documents. SKILLS & QUALIFICATIONS: • Minimum of 5 years of direct selling experience in AV, videoconferencing or related technology., • Must have the capability to comply with all safety rules and regulations required by clients for site visitation., • Demonstrated ability to generate a minimum of $5 million in revenue per year., • Demonstrated ability to generate a minimum of $1.25 million gross profit per year., • Has met or exceeded quota for the last 3 years., • Demonstrated experience in penetrating and upselling accounts., • Contract payment negotiation experience., • Advanced managed services sales experience (full solutions set)., • Demonstrated ability to convert clients into enterprise accounts: multi-location, multiple services, sole servicing., • Ability to work effectively with other business units to expand cross-selling., • Ability to work with other departments to improve internal processes and efficiencies., • Ability to mentor/coach other team members., • Proven history of performance in developing and maintaining strong customer relationships including competence in presenting to the Director, VP and C-level., • Excellent networking and communications skills., • Demonstrated ability to accurately create customer proposals detailing a scope of work, equipment list and line-item pricing of labor and materials., • Excellent computer skills, including a strong familiarity with the Microsoft Office applications (Outlook, Excel, Word, PowerPoint, Etc.) and Salesforce.com., • Strong writing skills necessary to create detailed system proposals., • A strong understanding of audio visual, display and videoconferencing equipment, applications, and functionality including remote control system products and applications (Crestron, AMX, etc.)., • Ability to read architectural and construction drawings., • Ability to draft basic signal flow sketches., • A working knowledge of commercial construction environments (power, conduit, core drills, etc.)., • An understanding of technology trends and solutions within the unified communications marketplace., • A Bachelor's degree, • CTS a plus This job description may be revised at any given time by Verrex Management. Employee Handbook Please refer to the Verrex Employee Handbook for company policies on such issues as employment wages, salary, benefits, services, reimbursable expenses, employee communications, safety, health, standards of conduct, and corrective action. Equal Opportunity Employer Statement Verrex is proud to be an equal opportunity employer. We are committed to creating an inclusive, respectful workplace where everyone can thrive.

Job Description LAPP is a family-owned company headquartered in Stuttgart and a global leader in cable and connection technology. Founded in 1959, we are still fully family-owned today. With around 5,800 employees, we are operating in over 80 countries – globally connected and regionally rooted. Working at LAPP means more: this is where inventive spirit and a hands-on mentality meet cherished values and tradition. We offer all employees the freedom to develop and pursue new opportunities. Flexibility and personal responsibility are just as important to us as a family-friendly work environment. We value all our colleagues with their talents, ideas and perspectives. SUMMARY:The Manufacturing Electrical Technician is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment in a manufacturing environment , as well as the Florham Park site facility.This role ensures that all electrical components of production machinery and facility systems operate safely and efficiently, minimizing downtime and maximizing productivity. ESSENTIAL DUTIES AND RESPONSIBILITIES – include the following. Other duties may be assigned. • Troubleshoot and repair electrical issues on manufacturing equipment, including motors, drives, PLCs, sensors, and control systems, • Perform preventive maintenance on electrical systems according to scheduled maintenance programs, • Respond to equipment breakdowns and emergency repairs to minimize production downtime, • Replace defective components such as relays, switches, motors, and circuit breakers, • Install new electrical equipment and machinery according to specifications and electrical codes, • Assist with equipment relocations and facility layout modifications, • Upgrade existing electrical systems to improve efficiency and safety, • Run conduit and wire new circuits as needed, 120V/220V/480V Circuits, • Read and interpret electrical schematics, blueprints, technical manuals, and wiring diagrams., • Document all maintenance activities, repairs, and equipment modifications., • Collaborate with the maintenance team, engineers, and production staff to resolve technical issues, • Provide input on equipment reliability and suggest improvements, • Follow all safety protocols, lockout/tagout procedures, and company policies, • Ensure all electrical work complies with the National Electrical Code (NEC) and local regulations, • Maintain a clean and organized work area, • Participate in safety training and continuous improvement initiatives, • May have to work at 20/30 ft height with the help of a scissor lift., • Familiar with 11KV to 480V Transformer, 480V Distribution System SUPERVISORY RESPONSIBILITIES:This job has no supervisory responsibilities. COMPETENCIES • Basic skills and working knowledge in the field of electro-mechanics., • Demonstrate excellent interpersonal & communication skills, strong work ethic, and a positive attitude., • Upholds all safety policies and procedures and OSHA guidelines., • Prioritizes and plans work activities while using time efficiently., • Looks for ways to improve and promote quality; Monitors own work to ensure quality., • Treats others with respect and upholds organizational values., • Accepts responsibility for own actions., • Meets productivity standards and strives to increase productivity results., • Ability to read mechanical/Electrical prints., • Use of Power tools, Multimeter/Amps meter, • Basic Machining skill like drilling/tapping, QUALIFICATIONS AND EDUCATION REQUIREMENTS • High school diploma or equivalent; associate degree in electrical technology or related field preferred, • 3-5 years of experience in industrial electrical maintenance, • Strong knowledge of electrical systems, including 480v three-phase power, motor controls, and plcs, • Ability to read and interpret electrical schematics and technical drawings, • Proficiency with electrical testing equipment (multimeters, megohmmeters, clamp meters, etc.), • Understanding of nec and osha safety requirements, • Journeyman electrician license, • Experience with programmable logic controllers (allen bradley, siemens, etc.), • Knowledge of variable frequency drives (vfds) and servo systems, • Familiarity with industrial networks and automation systems, • Welding or mechanical skills CERTIFICATIONS, LICENSES, REGISTRATIONS:n/a TRAVEL REQUIREMENTS:n/a LANGUAGE SKILLS:Ability to read and interpret electrical and mechanical drawings. Ability to speak effectively before groups of customers or employees of organization. Proficiency in the English language, written and spoken is required. MATHEMATICAL SKILLS:Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY:Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. COMPUTER SKILLS:To perform this job successfully, an individual should have knowledge of Lotus Notes and Microsoft Office. WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate. The employee must be able to tolerate conditions associated with no air conditioning or heat. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; sit and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. COMPENSATION: After thorough market analysis, LAPP takes many factors into consideration when determining base salary such as experience, knowledge, skills, abilities, etc. of the candidate. The base salary range for this role is $90,000 - $95,000 plus participation in LAPP's bonus plan. We also offer a comprehensive benefits package including Medical, Vision, Dental, Paid Time Off, Paid Holidays, 401(k), HSA/FSA, Life Insurance, and more! LAPP is an Equal Opportunity Employer You should be proficient in: • 120/208/240/480 Voltage Systems Machines & technologies you'll use: • Variable Frequency Drives (VFD), • Programmable Logic Controller (PLC) (Allen Bradley, Siemens), • Servo Motors

Job Description Solar Foreman / Project Manager – Lead Utility-Scale & Commercial PV Installations with PSG Energy Services Job Overview: • Company: PSG Energy Services, • Salary/Pay Rate: $95,000 to $105,000 per year, • Location: Nationwide Travel, • Job/Employment Type: Full Time, • Project Scope: Commercial and Utility-Scale Solar PV Projects, • Mandatory Licenses & Certifications: Valid Driver's License The Opportunity: You will serve as the primary on-site leader managing commercial and utility-scale solar PV installations nationwide. This hands-on role gives you complete site ownership to direct subcontractors, solve complex engineering challenges, and ensure high-quality execution from mobilization through commissioning. How You Will Make an Impact: • Field & Project Management, • Serve as the primary on-site representative for solar construction projects., • Manage daily construction activities from mobilization through substantial completion and closeout., • Direct and coordinate subcontractors, electricians, equipment operators, testing contractors, and other trades., • Develop and manage daily and weekly work plans to maintain the project schedule., • Track manpower, production, equipment, deliveries, and overall construction progress., • Identify schedule risks and field issues early and develop corrective action plans., • Coordinate site activities with the Project Manager, engineering team, customer, utility, AHJ, and other stakeholders as required., • Lead daily subcontractor coordination and planning meetings., • Maintain accurate daily reports, progress photographs, manpower counts, and construction documentation., • Review subcontractor work against contract scope and identify out-of-scope work or potential change-order conditions., • Assist with project turnover, punch lists, commissioning, inspections, and final closeout., • Solar Construction, • Supervise installation of commercial rooftop, carport, and ground-mount PV systems., • Understand and oversee:, • PV module installation, • Ballasted and mechanically attached rooftop racking, • Ground-mount racking and foundations, • DC string wiring and wire management, • Combiner boxes and DC equipment, • Inverters and power conversion equipment, • AC collection systems, • Disconnects and switchgear, • Transformers, • Underground conduit and trenching, • Grounding and bonding, • Equipment pads and foundations, • Communications and monitoring systems, • Rapid shutdown systems, • Verify equipment installation meets manufacturer requirements, approved drawings, specifications, and applicable codes., • Understand equipment clearances, mounting requirements, environmental requirements, conduit entry requirements, sealing, drainage, and equipment protection., • Perform or oversee basic electrical and mechanical troubleshooting., • Coordinate startup, commissioning, testing, and utility/PTO activities., • Safety Responsibilities, • Maintain a strong safety culture and enforce all company and site-specific safety requirements., • Conduct daily pre-task planning and Job Hazard Analysis/JSA meetings., • Verify subcontractors are following approved safety plans and procedures., • Identify unsafe conditions and immediately stop work when necessary., • Understand electrical hazards associated with energized PV systems., • Maintain appropriate OSHA documentation and site safety records., • Coordinate LOTO procedures when required., • Understand fall protection, excavation safety, equipment operation, electrical safety, and PPE requirements., • Immediately document and report incidents, near misses, property damage, and safety concerns., • Quality Control, • Inspect work continuously rather than waiting until project completion to identify deficiencies., • Verify construction against:, • IFC drawings, • Electrical one-lines, • Equipment layouts, • Structural drawings, • Manufacturer installation manuals, • Project specifications, • NEC requirements, • Approved submittals, • Maintain project punch lists and ensure deficiencies are corrected promptly., • Verify proper equipment mounting, torque requirements, grounding, wire management, labeling, conduit installation, weatherproofing, and sealing., • Document concealed work before it is covered., • Maintain photographs and records sufficient to document construction quality., • Coordinate required testing and commissioning documentation. Required Qualifications & Experience: • 5+ years of commercial or utility-scale solar construction experience preferred., • Previous experience as a Solar Foreman, Superintendent, Assistant Superintendent, Construction Manager, or Solar Project Manager strongly preferred., • Strong understanding of commercial PV electrical and mechanical installation., • Ability to read and interpret:, • Construction drawings, • Electrical one-lines, • Three-line diagrams, • Site plans, • Equipment layouts, • Structural details, • Manufacturer installation manuals, • Project specifications, • Working knowledge of the National Electrical Code (NEC) as it applies to solar PV installations., • Understanding of AC and DC electrical systems., • Knowledge of commercial solar inverters, disconnects, switchgear, transformers, racking systems, and monitoring equipment., • Ability to identify improper installation methods and quality issues., • Strong construction sequencing and scheduling skills., • Experience managing subcontractors and field crews., • Ability to manage multiple trades and work activities simultaneously., • Strong troubleshooting and problem-solving abilities., • Ability to make sound field decisions while recognizing when engineering or management approval is required., • Strong written and verbal communication skills., • Ability to communicate professionally with customers, subcontractors, inspectors, engineers, utilities, and internal management., • Comfortable using computers, tablets, email, Microsoft Office, PDF drawings, and construction/project-management software., • Ability to maintain organized project documentation. Preferred Qualifications & Experience: • OSHA 30 certification., • NFPA 70E training., • First Aid/CPR certification., • NABCEP certification or solar-specific training., • Electrical background or electrical license., • Experience with commercial rooftop and ground-mount solar., • Experience with SolarEdge, CPS, APS, or similar commercial inverter platforms., • Experience with IronRidge, EcoFoot, Unirac or similar racking systems., • Experience coordinating utility interconnections and commissioning., • Experience operating or supervising operation of forklifts, telehandlers, skid steers, lifts, and other construction equipment. Leadership Expectations The Solar Foreman / Project Manager is expected to take ownership of the job site. The successful candidate must be able to: • Lead crews and subcontractors firmly and professionally., • Hold subcontractors accountable for schedule, quality, safety, and workmanship., • Anticipate problems instead of simply reporting them after they occur., • Develop solutions to field problems and communicate them quickly., • Keep management informed of project status, risks, delays, and major decisions., • Protect completed work and owner property., • Maintain an organized and professional job site., • Understand when field changes require engineering approval., • Represent the company professionally with customers and project stakeholders., • Remain productive and organized while working independently with limited day-to-day supervision. Travel Requirements Extensive nationwide travel is required for this position. • Candidate should expect to travel approximately 50-75% of the time, depending on project workload., • Projects may require being away from home for multiple consecutive weeks., • Overnight stays and extended project assignments are expected., • Some weekend travel may be necessary based on project schedules., • Must have a valid driver's license and acceptable driving record., • Must be comfortable traveling by vehicle and commercial airline., • Must be flexible regarding project location and changing construction schedules. Physical Requirements • Ability to work outdoors in varying weather conditions, including heat and cold., • Ability to walk active construction sites and uneven terrain for extended periods., • Ability to climb ladders and access commercial rooftops when required., • Ability to safely lift and carry construction materials and equipment as necessary., • Ability to work around heavy equipment and active electrical construction., • Ability to perform work at heights while using required fall-protection equipment. Compensation & Benefits: • Competitive pay package tailored to field experience., • Performance-based and project completion bonuses., • Per diem and travel expense coverage for nationwide project assignments., • 401(k) retirement savings program with employer matching., • Comprehensive medical, dental, and vision insurance coverage., • Health Savings Account (HSA) and life insurance options., • Paid time off including paid holidays, vacation, and sick leave., • Provided safety equipment along with ongoing OSHA and technical certifications. About Us: PSG Energy Services specializes in commercial, industrial, and utility electrical and renewable energy solutions. We pride ourselves on being creative and adaptable problem-solvers who focus on driving measurable success for our clients. Learn more about our team and projects at https://www.psg-energy-services.com/ PSG Energy Services is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: We are seeking a Lead HTS Magnet Systems Engineer to own the full lifecycle of our large-scale High-Temperature Superconducting (HTS) cabled magnet systems. You will bridge interdisciplinary electrical and mechanical domains, driving everything from early stage design trade studies and cable architectures (CICC stacked REBCO) to manufacturing, assembly, QA test and integration into the device. Key Responsibilities: • End-to-End Program Ownership: Lead system design reviews (CDR/PDR), subsystem qualification, site commissioning, and risk mitigation across multi-year fusion hardware projects., • Cabled HTS Design: Specify and optimize high-current cabled HTS conductors, managing thermomechanical stresses, high-field Lorentz forces, and thermal quench propagation., • Large-scale manufacturing: Specify and review designs in the 1-10m range and in the 10-100 Tonne range., • Electro-Mechanical Integration: Direct coupling between high-current electrical power leads, quench detection systems, cryogenic cooling interfaces, and structural mechanical supports., • Vendor & Lifecycle Management: Oversee technical deliverables for HTS tape/cable vendors, manufacturing facilities, and integration test platforms.Core Competencies & Requirements: Direct Experience (10 - 15 Years Required), • Superconducting Systems: Proven track record design and delivery of high-field (10T+) HTS cabled magnets or low-temperature (LTS) Cable-in-Conduit Conductors (CICC) for fusion applications., • Program Execution: Demonstrated ownership of major lifecycle milestones in complex megaprojects (e.g., W7x, JT60SA, KSTAR, ITER -scale setups, or commercial fusion ventures) with budget ownership $10M - $50M., • Failure Analysis & Test Operations: Hands-on leadership of full-scale magnet testing, cryogenic qualification (4.2K–20K), and post-test forensics., • Start-up experience: Has dealt with the demands of a fast-growing start-up., • Large-scale magnet manufacturing experience: Demonstrated experience with dealing with the challenges of forgings, composite insulation, solder potting in the 1-10m length scale and aware of the challenges. Domain Knowledge, • Applied Superconductivity: REBCO 2G-HTS tape mechanics, strain limitations, current distribution, AC losses, and tape-to-cable joint architecture., • Multiphysics Engineering: FEA modeling coupling electromagnetic forces (Lorentz/Maxwell), structural stress analysis, thermal management, and fluid flow (gaseous/supercritical helium)., • Quench Protection & Diagnostics: Active and passive protection systems, voltage tap arrays, fiber-optic temperature sensors, and high-speed dump circuit interfaces., • Strategic Risk Mitigation: Mastery of FMEA (Failure Mode and Effects Analysis) applied to cryogenic system failures, vacuum loss (loss of vacuum/L VAC), and runaway quench scenarios.Technical & Leadership Skills, • Systems Engineering: CONOPS, requirements, Interface control documentation (ICD), requirements traceability, and cross-functional leadership spanning electrical and mechanical teams., • Software Tools: Proficiency with ANSYS, COMSOL, OPERA, MATLAB/Simulink, or custom HTS electrodynamic modeling tools.Education, • B.S., M.S., or Ph.D. in Electrical Engineering, Mechanical Engineering, Applied Physics, or Nuclear Engineering.Company Benefits:, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

You'll implement major features end-to-end, make architectural decisions that affect the entire platform, and have the ability to directly influence the engineering culture and how we build software. We’re looking for software engineers who are excited to build the next generation of Conduit Healt

P10 is launching a content studio built to support fast-moving, project-based social media clients and we need an Account Manager who can keep up. You will be the conduit between our clients and the delivery team, collaborating closely with project management and your core internal team to ensure pr

Job Description At RealCold, you're more than an employee—you’re part of a team that's building the future of cold chain logistics. We invest in our people by providing opportunities to learn, grow, and advance while fostering a culture built on integrity, accountability, safety, and continuous improvement. When you join RealCold, you'll find: • Competitive pay and comprehensive benefits, • Career growth and leadership development opportunities, • A safety-first culture where every employee matters, • A collaborative team that values your ideas and contributions, • Meaningful work with a fast-growing industry leader Build your career with a company that's growing—and helping its people grow along with it. If you're ready to grow your career with a company that's growing too, we'd love to meet you. The Role: The Warehouse Team Member supports the warehouse operation by having the ability to work cross functionally performing a variety of tasks to move products and packages throughout the warehouse, load and unload materials. The warehouse team member is responsible for the safe and efficient handling, storage, and distribution of goods within a warehouse facility. Their duties also involve inventory management, order fulfillment, and maintaining a clean and organized work environment. Essential Functions and Key Responsibilities: • Responsible for promoting a Safety Culture throughout the Facility, working safe is always the #1 priority; clean as you go to ensure everyone is working in a safe environment. Follow all safety rules & regulations at all times and be a conduit of safety to yourself and others., • Move products & packages throughout the warehouse utilizing appropriate equipment., • Conduct equipment checks prior to the start of the shift. Notify management as appropriate of any issues or safety concerns., • Load & Unload materials & merchandise from trucks & place them in the appropriate location within the warehouse for storage., • Notify supervision regarding any deficiencies in quality, customer shortages or damaged product., • Staging pallets as needed for shipment., • Select products according to tickets and accurately placing them in boxes for shipments, this includes but is not limited: product labeling & box building, • Assemble daily shipments by order location & category, • Ensure orders are packed into appropriate shipping containers for customer delivery., • Inspect the product as packing to ensure there is no damage., • Perform quality control assessments and stack them safely & securely., • Build boxes as needed for the shipment of product to customers., • Other duties as assigned. Requirements of the Position: • Minimum one (1) year of experience in a warehouse or related role., • Experience in a cold storage facility a plus., • Proficient in operating warehouse equipment, at least six months experience on one or more of the following: stand up forklifts, sit down forklift, reach truck, or pallet jack., • High School Diploma or equivalent., • Must be 18 years or older., • Must read, write, speak and understand English. Knowledge, Skills, and Abilities: • The ability to work in a team environment geared towards the common goals of shipping product/customer orders on time and in a safe manner., • Interact in a professional, friendly and respectful manner., • Excellent attention to detail., • Positive attitude and strong desire to succeed., • Great work ethic., • Ability to listen and take direction agreeably., • Be on time to work and reliable. Work Requirements: • Must be able to pass a background check., • Must be flexible and be able to work overtime., • Must be willing to work weekends and evenings., • Ability to work well under pressure., • Dress code is relaxed with a few rules to follow for safety; comfortable, closed-toe shoes are required. Work Environment: Works in a cold storage facility with exposure to low to below zero temperatures. This job may involve occasional exposure to some disagreeable elements such as dust, noise, etc. Accidents are improbable other than minor injuries. Environment may be fast paced at times. You will be working around moving machines, order pickers and forklifts. Physical Demands: This is not an all-inclusive list, but it is intended to give an overview physical requirement for this position. Reasonable accommodation will be provided under appropriate circumstances and in accordance with applicable law. While performing the duties of this job, the employee is regularly required to: • Continually: Sit, stand and walk for extended periods of time, • Continually: Speak and hear, • Continually: Lifting between 15 and 40 lbs., • Continually: Maintain attention for long periods of time with constant interruptions, • Continually: Work in an environment of 34 degrees for up to 10 to 12 hours per day, • Occasionally: Reaching and pulling RealCold is an Equal Employment Opportunity Employer. We believe in providing employment opportunities to all Team Members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Conduit Search has been retained by an award winning general contractor in their search for a career driven superintendent to join their team. The superintendent will direct the day-to-day on-site supervision of subcontractors to drive construction progress to deliver capital projects on-time and on

Voice Surveillance Business Analyst.The role is for a voice surveillance business analyst to be the conduit with technical teams for implementation of Nice Voice Surveillance solution.Understanding of implement VOIP /IPT voice recorder and analytical solutions and exposure to NICE Voice Surveillance

Conduit Search has been retained by an award winning general contractor in their search for a career driven superintendent to join their team. The superintendent will direct the day-to-day on-site supervision of subcontractors to drive construction progress to deliver capital projects on-time and on

Now hiring Certified Nursing Assistants (CNA). A Certified Nursing Assistant's (CNA) main role is to:. The CNA is often a patient's main caregiver and serves as a conduit between patients, nurses and doctors.

The Business Strategist utilizes data & analytics to support all new business sales opportunities within the Business Development team. The strategist will serve as a conduit for strong storytelling in the need for our services within specific categories & channels.

Undergraduate degree in Construction Management, Construction Engineering or equivalent. Weeks Construction - Project Engineers/Operations Managers- Northeast Region-CT, NY, NJ. In this role, you will be the main conduit of information between the Project or Construction Manager and the team for cos

Gotham FC ("Gotham FC" or "the Club") is a National Women's Soccer League ("NWSL") team representing New Jersey and New York. This person is the conduit between the club and its most passionate advocates, building trust, managing relationships, and ensuring that the supporter experience at every tou

Job DescriptionAdvance your career with us and be part of a mission-driven team delivering critical telecommunications and recovery solutions. At InfraServices, we’re more than a services provider — we’re innovators, problem-solvers, and collaborators. Our culture is built on a foundation of safety first, guided by a customer-focused philosophy, and defined by excellence and integrity. Here, every voice is heard, fresh ideas are celebrated, and exceptional talent is valued. We’re committed to building an employee experience rooted in trust, respect, continuous learning, and growth opportunities. Whether you’re building cutting-edge infrastructure, supporting field operations, or driving business development, you’ll play a vital role in upholding our core values and delivering on our business objectives. Job Summary: This position is responsible for the on-site supervision of the general construction activities being performed on wireless cell tower sites. Essential Duties and Responsibilities: • Direct and supervise the general construction activities being performed on wireless cell tower sites, including but not limited to the site layout, foundation, grounding, laying conduit and fiber, general landscaping, and electrical installations, as applicable, • Provide leadership to the crew from the beginning of a project through completion, ensuring safety and quality standards, budget, and timelines are adhered to, • Review the documentation to prepare for the build, assemble the necessary materials, and determine required installation methods, • Supervise the tracking of on-site inventory and materials, and refresh project supplies as needed, • Effectively sweep and PIM test all coax lines and fiber per customer specifications, • Collect, review, and submit all on-site closeout documentation per the deliverable timelines, • Identify areas of improvement for staff and make training recommendations to management as required, • Maintain tool inventory and upkeep daily on job site, • Ensure that the crew completes all required Company documentation, • Other duties as assigned Qualifications: To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or ability required. Education: High school diploma, general education degree (G.E.D.), or related trade school education Experience: • Six to eight years wireless telecommunications industry experience, • Two to four years supervisory experience, • General site construction and minor electrical experience, • Ability to operate equipment such as excavators and skid steers, • Must have or obtain and maintain OSHA Construction 10-hour Safety Training Card, • Must have or obtain and maintain First Aid and CPR certification, • Must have or obtain and maintain RF Radiation Safety & Awareness certification Technical Skills: • Computer and Microsoft Office proficiency, • Anritsu Site Master Certification, • Ability to install remote radio heads, • Ability to read plans, blueprints, and diagrams Soft Skills: • Basic mathematical skills and calculation ability, • Highly organized and detail oriented, • Ability to work independently with minimal supervision, • Strong verbal and written communication skills, • Ability to coordinate multiple tasks simultaneously, • Ability to think analytically, apply sound judgement, and solve problems, • Ability to motivate, lead, teach, and train on proper work and safety procedures Physical Requirements: • Must be able to pass pre-employment screening that includes background and drug testing, • Must have a valid driver’s license and a driving record that meets Company requirements, • Must be in good physical condition with the ability to stoop, crawl, bend at the knees and waist, squat, and lift 75 lbs., • Ability to work in various settings with moderate to loud noise levels, • Ability to work outdoors in all types of weather, • Ability to work long and unpredictable hours, • Ability to travel up to 75% of the time, including short notice travel. Travel includes local site travel or national travel depending on business needs. Employee Benefits: At InfraServices, taking care of our people is a top priority. That’s why we’ve built a strong benefits program designed to support you and your family, giving you the security you deserve. We know benefits are an essential part of your overall compensation, and we’re committed to offering a competitive package that reflects the value you bring. Below is a quick look at what we offer. Medical, Dental, & Vision Benefits: We've got your health covered. Short- & Long-Term Disability Benefits: Protection when you need it most. Company Paid Basic Life Insurance: Additional voluntary benefits are available. Voluntary Accident, Critical Illness, and Hospital Indemnity Plans: Added security for you and your loved ones. Flexible Spending Accounts: Manage your finances with flexibility. Employee Assistance Program (EAP): Support when life throws challenges your way. Wellness Program: Resources and programs designed to support your overall health and well-being. 401(K) with Company match: Building your financial future with us. Paid Time Off, Paid Sick Time, & Company Holidays: Achieving that work-life balance. Paid Parental & Paid Maternity Leave: Supporting your family is our priority. Military Differential Pay: Income protection for employees serving in the military. Employee Referral Program: Share the opportunities and reap the rewards. Company Discount Program: Enjoy savings on everyday expenses. Legal Assistance: Affordable legal support for employees. Disclaimer: All job requirements are subject to possible revision to reflect changes in the position requirements. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions and expectations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Honest Networks is dedicated to delivering high-quality and affordable internet service as a catalyst for community growth, fostering learning, creativity, and enjoyment. We are a rapidly expanding, venture-backed internet service provider headquartered in Manhattan. We focus on offering gigabit internet service at transparent and affordable prices, all while providing exceptional customer service. We achieve this goal by employing individuals with high integrity, a strong work ethic, and a passion for continuous learning. If working in a fast-paced, results-oriented, and mission-driven environment excites you, we encourage you to apply and join our team. Learn more at www.honest.net. About the Role This is a full-time, in-person role. • Honest Construction Technicians would be responsible for constructing and building out our network in residential apartment complexes and office buildings in NYC, Northern NJ, CT, and Philadelphia., • Technicians run fiber and ethernet through building risers; mount and install networking equipment in MDF/IDF closets; and set up and align radios on rooftops., • This is a fast-paced environment where you are likely working with 1 other person, setting up 2-3 buildings per month. Personal Attributes • Comfortable working in a fast-paced environment, • Experience working with hand/power tools, • Excited to learn: we are looking for technicians who have strong technical competency but are always interested in continuously learning, • Problem solving attitude: able to troubleshoot issues Requirements • No degree required, • 1-3 years of experience with fiber optic, ethernet cable or electrician/conduit work, • Ability to run fiber and cat5e/6 cabling through a large multi-tenant building (office, apartment complex), • Ability to install, terminate, and test troubleshoot network cabling, including through existing interior and exterior conduit, • Ability to power and test networking switches and other networking hardware, • Comfortable using mass transit operate during the day, • Comfortable working in high-rises and on rooftops, • Comfortable working in confined spaces, • Ability to read, understand, and follow work orders & change orders, • Capable of lifting up to 50 pounds, • Bonus, • Ability to bend pipe up to 1", • Ability to terminate fiber, • Knowledge of DC power Benefits • Attractive salary (estimate of $26-34/hr + OT) based on level of capabilities and experience, • Performance bonus potential, • Paid-time off (PTO), • Medical and dental benefits, • Metro card reimbursement Honest Networks' Values Honest is committed to providing equal employment opportunities to all individuals. We value diversity and do not discriminate based on race, color, ethnicity, age, gender identity and expression, sexual orientation, religion, national origin, socioeconomic status, disability, veteran status, or any other legally protected characteristic. We offer reasonable accommodations to applicants with disabilities upon request to facilitate their participation in the hiring process.

Job Description Job Description: \tThe Level 3 NOC Analyst is responsible for monitoring, maintaining, and troubleshooting the health of the organization's network infrastructure and systems. \tThis role involves providing advanced technical support, ability to resolve network issues. The Level 3 NOC Analyst will act as an escalation point for Level 1 and Level 2 analysts, provide mentorship, collaboration. Ability to isolate availability and performance issues, leading towards site outages, as they occur. \tReports To NOC Shift Supervisor \tMonitoring the network devices and infrastructure. Respond to alerts and incidents, performing diagnostics. Escalate issues as needed to Level 3 support or other support teams as needed. Create, Log, Track incident tickets, ensuring accurate documentation and timely response. \tUtilize network monitoring tools, proactively monitoring network health, device availability. \tAbility to troubleshoot routers and switches, conduit to the network engineering team \tKeen awareness to NOCs Standard Operating Procedures (SOP)and Runbooks \tClear understanding of NJTs network topology to quickly isolate problems, minimizing MTTR. \tLead Analyst in charge to identify, isolate, and restoration of services to remote locations. \tSenior team member, work collaboratively and gatekeeper to network engineering group. \tParticipate in ongoing training, professional development and remain current with technologies. \tMust have flexibility to work alternate shifts when required, nights, weekends, and holidays. \tResponsibilities as outlined by the NOC Shift Supervisor in charge. \tKnowledge of ITIL processes, best practices and workflow. \t3 to 5 years, advanced experience in network operations, technology and support \tExperience with SolarWinds system or similar NMS systems, toolsets, (Power User). Required \tClear understanding (TCP/IP, TELNET, SSH, TRACEROUTE, DNS,DHCP, VLANS, Routing and Switching) \tCertifications such as CompTIA Network+, or equivalent a plus

Job Description As an Field Technitian you will work with installation and repair of electrical systems, electronic components wires and conduits for the IT department. Specific responsibilities: Measuring, cutting, and bending wire and conduit, using measuring instruments and hand tools Installing power supply wiring and conduit such as: EMT, O-CAL, Rigid conduit, MC cable, strut, cable trays Assisting with troubleshooting electrical components, wiring diagrams, transformers, IT panels, motors, and circuit Helping to install, maintain, and repair electrical systems such as: access control panels and components, lighting, and power supplies, cameras and network equipment Tracing out short circuits in wiring, using test meter Examining electrical units for loose connections and broken insulation and tighten connections, using hand tools Constructing controllers and panels, using power drills, drill presses, taps, saws and punches Cleaning work area Maintaining tools and equipment and keeping parts and supplies in order Specific requirements: 1-5 years of electrical experience Valid driver's license in state of practice Ability to lift, carry, push, and pull up to 50 pounds Ability to bend, climb, squat, reach, and kneel Comfortable reading and understanding electrical blueprints, schematics, and diagrams Working knowledge of electrical theory, and the associated principles, materials, and equipment Demonstrated ability to operate hand and power tools associated with electrical work Ability to calculate basic mathematical problems Willing to work overtime High standard of integrity and professionalism Drug free at all times Hiper Networks New Jersey internet service provider, is seeking highly motivated Field Technitian to join our team. We offer consistent work, top pay, benefits, and employment opportunities in most major markets throughout New Jersey. If you are an Electrician Apprentice and are eager to become a skilled electrician by improving your skills and learning new ones, this is your chance to launch your career! In addition to consistent work, top pay, and employment opportunities, we provide a benefits package that is among the best in the industry. Our comprehensive benefits encourage our employees and their families to build a lifelong relationship with us.