Data engineering manager jobs in Passaic, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

The CDL Shuttle Driver drives passengers to and from assigned locations. Depending on the contractual need this could be around or near an airport, commercial building, hospital, sports arena, entertainment venue, educational facility or warehouse. Schedule: Part-time, Including Weekends Pay Rate: $23.00 - $24.00 per hour The pay listed is the hourly range or the hourly rate for this position. A specific offer will vary based on applicant’s experience, skills, abilities, geographic location, and alignment with market data. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit _ A good job for someone just entering the workforce or returning to the workforce with limited experience and education. ABM is a military and veteran friendly employer, veterans and candidates with military experience encouraged to apply. Military Occupational Specialty Code: 88M, LS, 3531, 2T1X1 • Transport, load and unload passengers, providing daily transportation services at designated pick-up and drop-off locations, • Ensure the safe loading and unloading of passengers, including the safe operation and handling of specialized equipment for unloading passengers with special needs (i.e• wheelchair lifts and tie-downs), • Help passengers to load and unload luggage as needed • Inspect vehicles on a regular basis to find any unsafe conditions or maintenance issues; perform routine cleaning and bus maintenance activities, • Meet patrons needing assistance to and from various airport locations and lots, • Inspect shuttle for preexisting damage record information using electronic device or manual ticket, • Provide excellent customer service to guests; respond to guest inquiries in a courteous manner, give directions to nearest highway, destination, etc., • Maintain and enforce bus evacuation plan and coordinates bus evacuation activities as appropriate, • Immediately reports any incidents or claims to Operations Manager or Shift Lead, • Refuel and maintain shuttle equipment and fuel use logs, • Maintain a clean work environment, disinfecting shuttle after each use, • Performs pre-inspection and post-inspection activities to ensure proper operating conditions, adherence to prescribed Department of Transportation standards, and compliance with proper safety standards Required: • Must be 21 years of age or older, • No high school diploma, GED or college degree required, • Air Brake experience is required, • This role required a CDL A or B w/ Passenger & Air Brake Endorsements Preferred: • One (1) year of prior work experience as passenger shuttle driver is preferred About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call 888-328-8606. We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

This Jobot Job is hosted by: Brian Perkins Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $80,000 - $170,000 per year A bit about us: Full service Professional Engineering firm serving New York and New Jersey with extensive experience in geotechnical and site/civil engineering services on a variety of projects across both the public and private market sectors including commercial, residential, educational, office, health care, and landmarked or historic buildings. Our extensive experience has allowed us to gain valuable knowledge of the regulatory approval and permitting process, and to develop close working relationships with local agencies and authorities. Why join us? Strong Family Atmosphere Strong Benefits Bonuses Profit Sharing Flexible Schedule Strong 401k Match Job Details Responsibilities will include but are not limited to the design and permitting of construction plans for site layout, grading, drainage, erosion control, stormwater treatment and conveyance, water and sewer, roadway, pump station and force main design. This individual will also provide technical and design services in support of civil engineering projects reporting directly to their project manager. Applicant must be able to communicate and coordinate technical evaluations and designs, produce reports in technical writing format, and correspond with other team members to complete work in a timely and efficient manner. Must have the ability to coordinate project submittals, facilitate regulatory agency approvals, and obtain construction permits. Experience: Bachelor of Science Degree in Civil or Environmental Engineering. Professional Engineering License Required Experience with AutoCAD Civil 3D and Microsoft Office required. Hydraflow Storm Sewer, Hydrograph, and WaterCad preferred. Must have strong communication and writing skills. Experience with design of land development projects preferred. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Sr Data Center Commissioning Engineer (Electrical) - Remote This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $120,000 - $165,000 per year A bit about us: We are an international conglomerate, with 10k+ employees, we are growing our Energy practice throughout the US and beyond! Our practice is built on the foundation that our people mean more to us than anything else! What that means for you, is that we expect you to enjoy a work life balance that promotes personal health, well being and family life! You will be part of a close-knit team of creative professionals and will be provided opportunities for continued growth, development, and recognition. Why join us? Competitive Base Salary! Competitive Bonus Package! Overtime Pay 401K Matching Contribution Flexible/Unlimited PTO Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Fun Company Activities! Job Details Sr Data Center Commissioning Engineer (Electrical) - Remote Successful candidates will have experience in Electrical Systems & Equipment with a focus in Data Centers and Mission Critical Facilities; experience and an understanding of Building MEP Systems Design, Construction, and Commissioning of Critical Systems ranging in size, rating, and complexity; Commissioning, Testing and Troubleshooting of Electrical Systems and related controls. You will be responsible for reviewing project information, executing daily field activities, maintaining project documentation, assisting the Project Manager, and providing guidance to junior engineers. QUALIFICATIONS ‑ BSc/MSc in Electrical Engineering OR 4+ years of Mission Critical / Data Center experience ‑ PE, EIT, CBCP Preferred, Not Required. ‑ 5+ yrs of experience Commissioning Electrical Systems for Data Center projects, or relevant and applicable industry experience. SKILLS Experience in Mission Critical facility commissioning essential Organized, detail-oriented, analytical, proactive, problem solver Good communication and relationship skills Effective written and verbal communication skills Ability to manage multiple tasks simultaneously and work with limited supervision Knowledge & experience with ASHRAE commissioning guidelines preferred Distributed control system experience a plus Reasonable understanding of Building Management Systems Deep understanding and application of test instrumentation Team player and a “client-first” mentality. DUTIES Commission electrical distribution equipment and related controls, primarily in data center environments, including HV and MV primary distribution Review system designs for compliance with client facility goals Prepare plans and procedures for execution of the commissioning process Conduct commissioning activities from the Design Phase into the Occupation Phase, in accordance with client requirements Attend factory testing of equipment and document procedures and results Conduct physical testing of electrical equipment and measure results using test instrumentation Fully document all field procedures, including results, issues, and observations using online applications Report on electrical system performance and make technical recommendations on issues Work with project teams to coordinate and execute field activities. Review and comment on project documentation, plans, and schedules Submit and maintain daily commissioning reports as required Assist in the training of junior engineers Respond to customer inquiries in a manner that exceeds the customer’s expectations Ensure compliance with company, client, and project safety requirements Knowledgeable with common mechanical, and controls-related building equipment, including: Engine generators / Uninterruptible power supplies & battery systems / Medium and low-voltage electrical switchgear/ PLC controls and sequences of operations / Automatic transfer switches / Static transfer switches / Power distribution units / Busways Grounding Systems. BENEFITS: Competitive Salary – 10% Annual Bonus Opportunity – Over Time Pay – Flex Paid Time Off – Full Healthcare Coverage – 401K with Matching Contribution IMPORTANT NOTICE This is Strictly a Building Engineering position focused on Data Center Commissioning of Electrical Systems and Facility Operations. The firm Does NOT Hire for Any I.T. positions. Applicants Seeking IT-related opportunities Should NOT Apply.. Thank you for your understanding. Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Global Manager, IT Support Services The Global Manager, IT Support Services leads our worldwide employee technology support organization, overseeing the 24/7 Global Service Desk (Tier 1) and three regional Tech Support teams (EMEA/IL, Americas, and APAC) and Mobile Team. This leadership role owns all employee support channels, including chat, portal, onsite, and remote services, while driving exceptional employee experiences and operational excellence. The position is responsible for advancing automation and Ailed support strategies, unifying global processes and tools, and partnering closely with IT, Security, HR, Facilities, and Engineering to deliver a seamless, modern, and scalable support ecosystem. Global Manager, IT Support Services Impact Areas Operational Excellence & Proactive Strategy: Proactive Service Evolution: Transition from reactive troubleshooting to a preventative service model by leveraging deep data analytics and trend forecasting to resolve issues before they impact the business. Scalable Global Infrastructure: Architect robust staffing models and readiness plans to ensure seamless, 24/7 global operations across all time zones. Strategic Process Ownership: Drive the maturity of ITSM practices (Incident, Request, Problem, Knowledge, and Change Management) to ensure operational stability and governance. Performance Benchmarking: Establish and monitor high-impact KPIs, including FCR, MTTR, CSAT, NPS, and SLA/SLO compliance, to maintain a culture of continuous improvement. Use AI technologies to enhance self-service, streamline knowledge management, and create intuitive, frictionless digital experiences for a global workforce. Professional Team Development: High-Performance Leadership: Lead and mentor a distinguished, professional Global Service Desk (GSD) team, fostering a culture of technical excellence, empathy, and professional growth. Executive-Grade Support: Cultivate a team capable of providing white-glove support for executive leadership and key stakeholders, ensuring zero-friction technology experiences. Knowledge & Documentation Standards: Maintain a gold-standard repository for ticketing and technical documentation, promoting a culture of collaborative knowledge sharing and rapid onboarding. Innovation & Digital Transformation: Next-Gen Automation: Accelerate the digital roadmap by expanding AI-driven virtual agents, sophisticated automation workflows, and intuitive self-service portals to reduce manual overhead. Cross-Platform Technical Mastery: Ensure the team delivers elite troubleshooting across a diverse ecosystem of devices (macOS, Windows, Mobile) and enterprise platforms. Strategic Stakeholder Alignment: Serve as a confident liaison between IT and business units, translating complex technical data into strategic insights that drive organizational value. Crisis & Vendor Management: Expertly manage major incidents and business communications while nurturing strategic vendor partnerships to ensure the highest tier of service delivery. Global Manager, IT Support Services Required Qualifications Bachelor's degree in information technology or a related field preferred. 8 to 12+ years of experience in IT Support or IT Operations, including 4 to 6+ years leading global or multi-site teams. Demonstrated ability to leverage operational metrics to drive improvements in the employee technology experience. Strong ITSM expertise with a solid technical foundation; familiarity with automation, self-service, and AI driven support models. Proven experience implementing AI-driven support models, including virtual agents, predictive issue detection, intelligent routing, and automated remediation workflows to elevate the employee support experience. Demonstrated ability to design and scale automation frameworks within ITSM platforms, reducing manual workload and increasing first contact resolution. Exceptional communication, leadership, and stakeholder management skills. Global Manager, IT Support Services Preferred Qualifications Experience managing follow the sun operations and supporting distributed global teams. Proven success developing or scaling executive level/VIP support programs. Track record of leading continuous improvement initiatives to enhance service quality and operational efficiency. #RT

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT. Commercial Construction Assistant Project Manager - Mission Critical Job Description: An Assistant Project Manager (APM) obtains, evaluates, coordinates and distributes the information and authorizations necessary to construct projects on time, within budget and to the quality specified. The APM is responsible to protect and promote the interest of both the business and client in all matters as well as demonstrate the personal characteristics of a beginner-level leader. While learning paths, growth and promotional opportunity vary, most team members are APMs for two to six years. Responsibilities Maintain adherence to HITT’s standards of safety Ensure that required documentation is filed Assist in creating and managing project budget for all assigned projects Develop pre-construction RFP package Assist in conducting project meetings, setting milestones and formulating monthly owner report Establish job processes (RFIs, submittals, and pay applications) including approving pay applications and negotiating subcontract change orders Update project schedule; ensure project quality control and establish overall project logistics Assist in managing the closeout process Collaborate with the project superintendent and site operations team throughout the life of the project Qualifications High school diploma required, four-year degree from an accredited university with a concentration in construction, engineering, or business is strongly preferred In lieu of a degree, additional work experience is acceptable 2-5 years’ experience in commercial construction, including experience with a commercial general contractor Previous experience on commercial job sites strongly preferred Passion for construction and our industry; ability to recognize and seek quality Ability to master sector/project-specific software systems including but not limited to: Microsoft Office suite (ex. Project, Excel, Word, Outlook, PowerPoint, etc.), ProCore, Adobe, BlueBeam, JD Edwards Must demonstrate a strong ability to: Communicate clearly, concisely, and professionally, with a strong focus on audience appropriate business writing and verbal skills Demonstrate a positive attitude and passion for construction and our industry Gather data, interpret it into meaningful information, and relay that information through clear, concise communication strategies; ability to see how pieces and processes fit into and affect the bigger picture/business model Organize and manage tasks and priorities Demonstrate integrity consistently with The HITT Way and HITT’s core values Seek continuous improvement of knowledge and abilities, internal focus on self-improvement Adapt and exercise flexibility with the ever-changing world of technology, design, means and methods Collaborate with people of various backgrounds and styles Create and maintain relationships with colleagues, clients, subcontractors, and vendors Exhibit respectfulness by being punctual, engaged/focused, and respectful of others In accordance with New York City Human Rights Law (NYCHRL), Local Law 32, the base salary range for this position is: $84,700.00 - $121,000.00 Compensation in other cities and states may vary. HITT Contracting offers a competitive total benefits and compensation package including performance-based bonuses, premium health care coverage including vision and dental, employer-matched 401(k), wellness reimbursement program, paid holidays and time-off, and other voluntary benefits and leave types. The determination of salary is based on the candidate’s individual professional experience, qualifications, education, skills, and training. HITT Contracting is an equal opportunity employer. We are committed to hiring and developing the most qualified individuals based on job-related experience, skills, and merit. All employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. We value a respectful, inclusive workplace where everyone has the opportunity to succeed. HITT Contracting maintains a drug-free workplace, consistent with applicable local, state, and federal laws.

Lead Mechanical Commissioning Engineer / Project Manager (Data Centers) - Remote This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $135,000 - $165,000 per year A bit about us: Award-Winning International Engineering Firm with a dedicated Data Center Commissioning practice. We lead the industry in Energy Efficiency, Environmental Services, and Energy Management. We deliver Mission-Critical Infrastructure Solutions for Hyperscale Data Center Projects with top technology clients such as Microsoft, Google, Meta, and AWS. By engaging early in the design and construction process, we ensure systems perform as intended—providing a reliable foundation for long-term operational success. If you are a Commissioning Project Manager with Data Center experience please apply or email directly at https://jobot.com/apply/mechanical-commissioning-engineer-project-manager-data-centers/1847070391?utm_source=Monster Why join us? Competitive Base Salary with Bonus Salary + Time & Half Overtime 401K with Matching Contribution Unlimited PTO Complete Health Benefits with Life Insurance Fully Remote Accelerated Career Growth! Job Details Data Center Commissioning Project Manager (Lead Mechanical) - Full-Time – (Remote/Travel) Base Salary $135K to $165K (Total Comp $160K to $190K) The successful candidate must be self-motivated and well versed in Data Center projects touching on large building MEP systems design, commissioning, retro-commissioning, energy modeling/analysis and construction for complex buildings. Assessment, optimization and/or commissioning activities for utility plants will also be expected. The Data Center Project Commissioning Engineer will perform construction observations, review contract documents, develop functional test plans and execute tests for a wide variety of mechanical, and controls systems. They will execute retro-commissioning engineering/energy studies & contribute to design and energy projects for National industrial, institutional, and commercial clients. This role is also tasked with assisting in managing small to large Data Center projects to meet client expectations for technical excellence, budget, and schedule. Qualifications Bachelor’s Degree in Mechanical Engineering field preferred. Must have at least 4 years of specific Data Center Commissioning experience (Electrical/Mechanical.) Experience with Project Management - scheduling; coordination with staff & contractors; verifying field quality; accountability; cool under pressure Technical mechanical expertise Available to be On-Site ~60% to 70% Has experience with managing staff Experience in diagnosing and solving construction and operational problems. Experience managing design/energy services commissioning project resources to pre-determined scope, fee, and schedule. Knowledge of building codes, construction industry standards, such as ASHRAE, LEED. Effective leadership and written / verbal communication skills are essential. Preferred, Not Required PE, CBCP, BCxP, CEM, CCP, CxA are a plus We can offer you the opportunity to work with State-of-the-Art Clients making a meaningful impact on today's society and the next generation! Help us revolutionize the way Engineering firms treat their employees! Join us and enjoy accelerated career growth with exciting life balance at a TOP ranked Engineering firm! Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Description We are seeking a Lead Transmission Line Engineer who will manage a collaborative and dynamic team working in a fast-paced environment, solving challenging problems involved with electric transmission. The successful candidate will serve as a Lead Engineer and Technical Project Manager on high voltage electric transmission line design projects of overhead and underground systems for some of the largest utilities in the country as well as regional utilities. The candidate will apply NESC, ASCE, ACI, NEC, and other applicable standards in the engineering and design of all types of capital and maintenance projects from 34.5 kV to 765 kV. Additionally, the candidate will direct a team of engineers that regularly perform engineering analyses, PLS-CADD modeling, structure loading calculations, foundation design using MFAD and/or LPILE, design structure framing and hardware assemblies, draft plans and specifications, and prepare bill of materials and procurement documents across project planning, engineering, environmental, permitting, and construction management phases. The successful candidate can expect a fast-paced, diverse work environment and flexible work hours/work arrangements as well as a manager and peers who will encourage career development and growth! In addition, the successful candidate will be involved in applying AI, automation, and digital design platforms to streamline grid modernization and increase design efficiency. This is a senior leadership role with primary responsibilities in client relations, staff management, proposal development, scope creation/change, project execution, and new business capture for the team’s full book of work. The successful candidate will be able to communicate clear expectations, goals, and vision; manage the performance of direct reports; motivate, coach, and mentor skilled professionals; and appropriately delegate project work. The candidate must be capable of managing collaboration and a positive team culture to achieve successful results. Location: This position is a hybrid work position with the potential for remote work for the right candidate located in Pennsylvania, Ohio, or West Virginia. Relocation assistance may be available for qualified candidates. The Challenge: • Direct multiple design teams simultaneously executing various projects and programs for multiple clients., • Develop a team of engineers by training, coaching, and nurturing Leidos’ engineering talent., • Supervise staff by approving timesheets and running the annual performance review process., • Participate proactively as a member of the leadership team of the Transmission Line Section., • Create responses to RFPs, RFIs, and RFQs from clients for new work, including proposal creation and definition of scope of work., • Possess a growth mindset to foster creative problem solving for our clients’ most complex issues., • Promote continuous improvement to develop streamlined processes and tools that facilitate improvements to departmental technical resources via innovation and automation., • Delegate tasks to staff, forecast and plan their future workload, and run recruiting activities to support aggressive growth goals., • Drive the quality control process for the execution team to ensure the highest level of quality in all deliverables., • Liaise with clients to maximize affinity, facilitate business development growth, and foster long-term relationship building., • Manage portfolio health by leveraging Project Managers to independently drive and monitor scope, schedule, and budget. Accountability for schedule compliance requires high awareness and support from assigned Lead Engineers. What Sets You Apart (Required): • Bachelor’s degree in Civil, preferred, or Mechanical Engineering with eight plus (8+) years of relevant experience in the design of high voltage electric utility transmission systems., • Expertise in PLS-CADD and PLS-POLE., • Engineer In Training (EIT) certification., • Work effectively in a team environment; can also work independently., • Track record of outstanding communication to serve as primary point of contact for existing and perspective clients., • Business acumen with a record of understanding and meeting key project performance metrics., • Working onsite in a Leidos or client office is a possibility; some periodic travel may be required., • Ability and passion to develop staff through mentoring. Favorable If You Have: • Two plus (2+) years of supervising staff., • M.S. degree in Structural Engineering., • Experience with TOWER., • P.E. certification or the ability to achieve P.E Certification in 6 months., • Experience with LPILE or FAD, Mathcad, AutoCAD or MicroStation, and Geographic Information Systems (GIS) is a plus. Why Leidos: At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities, and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference. We value and support the well-being and mobility of our employees with competitive benefit packages, complementary e-learning training, work-life flexibility, an exciting External Referral Program, and a diverse, inclusive, and ethical workplace. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. If this sounds like the kind of environment where you can thrive, keep reading! Are you ready to make an impact? Begin your journey of a flourishing and meaningful career; share your resume with us today! PowerDelivery PDSTLINE If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. Original Posting:April 30, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $92,300.00 - $166,850.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit www.Leidos.com. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at www.leidos.com/careers/pay-benefits. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at LeidosCareersFraud@leidos.com. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the U.S. Federal Trade Commission. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Job Title - Technical Project Manager – Capital Markets (Post-Trade) Location – New jersey – Hybrid onsite 3 days a week Hire Type – Fulltime Technical Project Manager – Capital Markets (Post-Trade )Job Summar yWe are seeking an experienced Technical Project Manager with strong Capital Markets Post-Trade domain expertise to lead and deliver strategic technology initiatives across trade processing, clearing, settlement, reconciliation, corporate actions, and regulatory reporting platforms. The role requires close collaboration with business stakeholders, operations teams, architects, developers, QA teams, and external vendors to ensure successful project execution and operational excellence .Key Responsibilitie sProject & Program Managemen • tLead end-to-end delivery of post-trade technology projects, • .Define project scope, timelines, budgets, milestones, and resource plans, • .Manage Agile, Scrum, Waterfall, or hybrid project methodologies, • .Track project risks, dependencies, issues, and mitigation plans, • .Prepare and present project status reports to senior management and stakeholders .Capital Markets Post-Trade Domain Managemen • tWork closely with Operations, Middle Office, and Back Office teams, • .Drive initiatives involving, • :Trade Capture and Validatio, • nTrade Matching and Confirmatio, • nClearing and Settlemen, • tReconciliatio, • nCorporate Action, • sSecurities Lendin, • gCollateral Managemen, • tRegulatory Reportin, • gCash and Position Managemen, • tEnsure compliance with market regulations and operational controls .Technical Leadershi • pCoordinate with solution architects and engineering teams to design scalable solutions, • .Manage system integrations across trading, risk, settlement, and reporting platforms, • .Oversee application development, testing, deployment, and production releases, • .Support cloud migration, modernization, and automation initiatives, • .Ensure adherence to SDLC, DevOps, and release management processes .Stakeholder Managemen • tAct as the primary liaison between business users and technology teams, • .Gather and translate business requirements into technical deliverables, • .Facilitate workshops, requirement sessions, and governance meetings, • .Manage relationships with vendors, exchanges, custodians, and clearing houses .Governance & Risk Managemen • tEnsure delivery aligns with regulatory and audit requirements, • .Monitor project financials and resource utilization, • .Establish KPIs, SLAs, and project success metrics, • .Drive issue resolution and escalation management . Required Skills & Experien ceCapital Markets Knowled geStrong understanding o • f:Equiti, • esFixed Inco, • meDerivatives (Futures, Options, Swap, • s)FX Marke, • tsTrade Lifecyc, • leClearing & Settlement Process, • esCustody Servic, • esRegulatory Reporti ngTechnical Skil • lsProject Management tools (Jira, Confluence, MS Projec, • t)SQL and Data Analys, • isAPI and Integration technologi, • esCloud Platforms (AWS, Azure, GC, • P)DevOps and CI/CD concep, • tsMicroservices Architectu, • reData Warehousing and Reporting solutio nsMethodologi • esAgile / Scr, • umWaterfa, • llSAFe (preferre, • d)ITIL (preferre d)Leadership Skil • lsStakeholder Manageme, • ntVendor Manageme, • ntBudget Manageme, • ntRisk & Issue Manageme, • ntTeam Leadersh, • ipExecutive Communicati on Preferred Qualificati • onsBachelor's degree in Computer Science, Engineering, Finance, or related fie, • ld.8–15+ years of IT experien, • ce.5+ years of Project/Program Management experience in Capital Marke, • ts.Experience with post-trade platforms such, • as:DTCC proces, • sesSWIFT messag, • ingSettlement syst, • emsCustody platfo, • rmsReconciliation to, • olsPMP, PRINCE2, CSM, or SAFe certifications preferr ed.

A leading environmental services and infrastructure company is looking to add a Safety Manager to support operations across New Jersey, based in the Paramus, NJ area. This role will focus on strengthening health, safety, and security practices across multiple operational sites while building a strong, proactive safety culture. This person will be tasked with providing senior-level leadership, driving compliance, and reducing risk in complex, regulated environments. It’s a strong opportunity for an experienced safety leader to influence strategy while remaining closely connected to field operations. The Role • Lead and evolve division-wide health, safety, and security programs to improve safety culture, compliance, and behavioral performance across multiple facilities., • Serve as the senior HSS authority for the New Jersey division, partnering closely with operations and leadership to assess risk, implement preventative strategies, and support ongoing and new initiatives., • Manage and mentor a safety professional while overseeing training programs, audits, inspections, and field coaching efforts., • Direct incident investigations, injury case management, and workers’ compensation activities, ensuring strong root-cause analysis and executive-level reporting., • Analyze safety data and trends to develop predictive insights, guide decision-making, and reduce incidents across diverse operational environments. The Candidate • Bachelor’s degree in Safety, Environmental Engineering, or a related discipline, with 5+ years of experience in health, safety, and security compliance., • Background in construction, industrial, utility, or similar high-risk operational environments with strong regulatory exposure., • Demonstrated ability to lead safety strategy while remaining hands-on in the field with crews and site leadership., • Strong communicator and coach, comfortable influencing at all levels of an organization and managing competing priorities., • Professional safety certifications (CSP, CHMM, OSHA instructor credentials) are preferred, along with the ability to be on-call and travel regularly within the region.

Position Summary The Switchgear Project Manager/ Estimator is responsible for leading the technical sales, application engineering, and project execution support for medium- and low-voltage switchgear solutions. This role serves as the primary subject matter expert for switchgear products, supporting internal sales teams, customers, and manufacturers to drive revenue growth, ensure technical accuracy, and deliver high-quality project outcomes. About the Role Key Responsibilities Technical Expertise & Application Support • Serve as the in-house expert for low- and medium-voltage switchgear, switchboards, panelboards, and related power distribution equipment, • Review customer specifications, single-line diagrams, and construction documents to develop compliant solutions, • Provide equipment selection, sizing, and configuration support (breakers, bus ratings, protection schemes, etc.), • Ensure compliance with applicable codes and standards (NEC, UL, ANSI, IEEE) Sales Support & Business Development • Partner with outside and inside sales teams to develop quotations and technical proposals, • Engage with contractors, engineers, and end users to influence equipment specifications and win projects, • Identify opportunities to upsell value-added solutions (custom assemblies, engineered systems, service packages), • Support bid strategy, pricing, and negotiation for complex switchgear projects Project Management & Execution • Act as technical lead throughout the project lifecycle—from quotation through order, submittals, production, and delivery, • Review and approve submittals, shop drawings, and bills of material, • Coordinate with manufacturers to ensure accuracy, lead time alignment, and issue resolution, • Support logistics planning, including delivery sequencing and site requirements Manufacturer & Vendor Coordination • Maintain strong relationships with key manufacturers, • Stay current on product updates, new technologies, and factory capabilities, • Escalate and resolve technical or commercial issues with vendors Qualifications • 1++ years of experience in switchgear, power distribution, or electrical equipment sales/application engineering, • Strong knowledge of distribution systems Required Skills Technical Skills • Deep understanding of switchgear design including protective devices, bus systems, arc flash mitigation, and coordination, • Ability to read and interpret single-line diagrams, specifications, and construction drawings, • Familiarity with manufacturer configuration tools Business & Interpersonal Skills • Strong commercial acumen with experience supporting high-value, complex bids, • Excellent communication and customer-facing skills, • Ability to manage multiple projects and deadlines simultaneously, • Leadership mindset with a collaborative, team-oriented approach Preferred Skills • Experience with mission-critical environments (data centers, healthcare, industrial facilities), • Knowledge of medium-voltage equipment (VFI switchgear, metal-clad gear, unit substations) Pay range and compensation package Salary is commensurate with experience • Key Performance Indicators (KPIs), • Revenue growth and gross margin on switchgear projects, • Quote conversion rate and project win percentage, • Accuracy of proposals and reduction in order errors, • On-time project delivery and customer satisfaction, • Internal training effectiveness and team engagement Equal Opportunity Statement We are committed to diversity and inclusivity.

Job Title: (Credit Operations Analyst)) Are you a [Industrial/Manufacturing Engineer)) professional seeking a dynamic and rewarding opportunity? Our client, a leading company in (Banking) looking for a talented (Credit Operations Analyst))] to join their growing team in [Jersey City NJ) About Kyyba: Founded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances. At Kyyba, the overall well-being of our employees and their families is important to us. We are proud of our work culture which embodies our core values; incorporating value, passion, excellence, empowerment, and happiness, creates a vibrant and productive atmosphere. We empower our employees with the resources, incentives, and flexibility that they need to support a healthy, balanced, and fulfilling career by providing many valuable benefits and a balanced compensation structure combined with career development. Job Description: Responsibilities: • Handle day-to-day global banking operations activities, such as, • reviewing the credit deals,, • perform control activities; and, • processing data from credit agreements and other documents, into Client systems, • Close the credit deals within allocated time and report to the approving manager, • Credit deal’s Data analytics & reporting, • It requires strong written and verbal communication skills to work with the business stakeholders in New York and clients based in the US., • Needs to be analytical and detail oriented who can work independently, prioritize multiple tasks, and take ownership of assigned credit deals., • Work closely with Operations and IT teams to assist in process improvements and automation., • Produce & enhance reports as per management needs. Minimum Required Qualifications: • Any Bachelor degree, • 0 to 2 years’ experience, • Excellent in MS Excel, • Good written and verbal communication skills, • Strong analytical skills, in relation to document reviews and number crunching. Preferred Qualifications: • Data analytics, • Someone with Credit experience or knowledge, • Someone with performing Control activities . . (JerseyCityNJ) (Page Range Where Required (currently California, Colorado, Connecticut, Hawaii, Illinois, Maryland, Massachusetts, Minnesota, Nevada, New York, Rhode Island, Vermont and Washington) Disclaimer: Kyyba is an Equal Opportunity Employer. Kyyba does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law. Minorities / Females / Protected Veterans / Individuals with Disabilities are encouraged to apply. All employment is decided on the basis of qualifications, merit, and business need.” It is the policy of Kyyba to provide reasonable accommodation when requested by a qualified applicant or employee with a disability, unless such accommodation would cause an undue hardship. The policy regarding requests for reasonable accommodation applies to all aspects of employment, including the application process. If reasonable accommodation is needed, please contact Kyyba at 248-813-9665 Rewards: Medical, dental, vision 401k Term life Voluntary life and disability insurance Optional Pre-paid legal plan Optional Identity theft plan Optional Medical and dependent FSA Work-visa sponsorship Opportunity for advancement Long-term assignment with opportunity for hire by client SELECT AWARDS • An INC 5000 company for 10 years, • Corp! Michigan Economic Bright Spots, • Crain’s Detroit Business Top Staffing Service Companies in Detroit, • TechServe Alliance Excellence Award- IT and Engineering Staffing & Solutions, • Best of MichBusiness winner in HR Wizards & Partnerships, • Metro Detroit Elite Category: Recruitment, Selection & Orientation for 101 Best & Brightest, • 101 Best & Brightest Companies to Work for in Michigan

We are seeking an ESS Heavy Transportation & Project Logistics Manager, who will lead the development, coordination, and execution of complex Energy Storage System (ESS) logistics projects across Americas. This role is intended to establish LX Pantos’ capability to compete in: • ESS logistics,, • engineered transportation,, • oversized project cargo,, • and future infrastructure logistics opportunities through a scalable and repeatable operational model rather than reactive project-based execution. ■ About the Role The ESS Heavy Transportation & Project Logistics Manager will serve as the central solution owner for ESS-related transportation, yard operations, permitting coordination, specialized carrier management, and cross-functional project execution. This position is responsible for transforming one-time project execution into a scalable and repeatable logistics capability by establishing operational playbooks, carrier ecosystems, engineering coordination processes, and structured execution governance. The role acts as the primary internal project lead between: • Sales, • Contract Logistics, • Transportation Procurement, • StarLinks / BoxLinks ■ Responsibilities 1. ESS Project & Solution Management • Lead end-to-end ESS logistics projects from RFQ stage through operational execution., • Design transportation and yard operation concepts for ESS and oversized cargo movements., • Coordinate routing, permitting, compliance, equipment sourcing, and execution planning., • Act as the primary internal project manager for ESS opportunities. 1. Heavy Transportation & Carrier Management • Build and manage a qualified heavy-haul carrier network across North America., • Support onboarding and qualification of specialized carriers and project logistics partners., • Validate carrier capabilities, route feasibility, and operational reliability., • Coordinate with transportation procurement teams on pricing, capacity, and risk mitigation. 1. Yard & Infrastructure Coordination • Support yard selection, operational design, and equipment requirements for ESS storage operations., • Coordinate yard layout concepts, handling flows, and operational readiness plans., • Support evaluation of straddle carriers, specialized chassis, lifting equipment, and heavy handling solutions. 1. Permit & Route Engineering Coordination • Coordinate with internal and external stakeholders regarding: DOT regulations, overweight permits, state routing requirements, escort requirements, and route engineering., • Maintain standardized routing and permit playbooks for future ESS projects. 1. Cross-Functional Project Leadership • Lead coordination across: Sales, CL, StarLinks, BoxLinks, Operations, Procurement, PI, and external partners., • Establish clear project governance and milestone tracking., • Manage RFQ timelines, deliverables, and escalation processes. 1. Product & Capability Development • Support development of a scalable ESS logistics product offering., • Build standardized: RFQ frameworks, pricing models, operating procedures, risk assessments, and execution playbooks., • Identify capability gaps and support long-term operational roadmap development. ■ Qualifications • 7+ years of experience in Heavy transportation, Project logistics, Oversize & overweight transportation, Energy / ESS / infrastructure logistics, EPC or industrial project management, • Specialized trucking or project cargo operations, • Strong understanding of heavy-haul transportation, permitting processes, route planning, and project execution., • Experience coordinating cross-functional logistics projects., • Strong commercial and operational understanding., • Ability to manage multiple stakeholders in fast-paced project environments., • Experience working with specialized carriers, transportation providers, or industrial logistics vendors., • Strong communication and project leadership skills. ■ Preferred Qualifications • Experience with ESS/BESS logistics, renewable energy infrastructure, battery logistics, data center infrastructure, transformer logistics, wind/solar project cargo, or industrial EPC projects., • Knowledge of DOT regulations, overweight permitting, hazardous cargo handling, and engineered transportation solutions., • Existing carrier/vendor network within North America heavy-haul market., • PMP certification or similar project management background preferred. ■ Job Location Primary location: Teaneck, NJ / Chicago, IL Pay range and compensation package Medical, Dental, Vision Insurance Plan (100% Employer paid) 401K Plan w/ Employer Match Life Insurance Plan (100% Employer paid) Generous PTO, Paid Holiday, Floating Holiday Equal Opportunity Statement We are committed to diversity and inclusivity.

Senior Crane Manager NY & NJ The Senior Crane Manager leads all operational, technical, and maintenance activities for ship‑to‑shore (STS) cranes, rubber‑tired gantry (RTG) cranes, and related lifting equipment. This leader ensures maximum crane availability, safe operations, and high productivity to support vessel turnaround times in one of the busiest container terminals on the East Coast. The role requires deep expertise in heavy equipment maintenance, union workforce leadership, and real-time decision-making in a 24/7 port environment. Responsibilities: • Direct daily operations of STS, RTG, and yard cranes to meet vessel schedules, berth plans, and productivity targets., • Coordinate closely with Vessel Operations, Yard Planning, and Maintenance to optimize crane assignments and minimize downtime., • Monitor real-time crane performance metrics and intervene quickly to resolve operational bottlenecks., • Lead shift handovers, operational briefings, and incident reviews to maintain consistent performance across all crews., • Oversee preventive, predictive, and corrective maintenance programs for all cranes and lifting equipment., • Ensure compliance with OEM standards, OSHA regulations, and safety protocols., • Partner with engineering teams to diagnose complex mechanical, electrical, and PLC control issues., • Manage major repairs, component replacements, and capital improvement projects, including crane upgrades and modernization initiatives., • Enforce strict adherence to safety procedures, lockout/tagout, fall protection, and heavy-lift protocols., • Conduct safety audits, root-cause analyses, and incident investigations; implement corrective actions., • Maintain compliance with OSHA, MSHA (if applicable), TWIC requirements, and port authority regulations., • Champion a safety-first culture across all crane operations and maintenance teams., • Lead and develop a unionized workforce of crane operators, technicians, and supervisors., • Manage staffing levels, shift scheduling, overtime, and training programs., • Build strong relationships with labor partners while upholding performance and safety standards., • Coach supervisors on performance management, skill development, and operational discipline., • Develop annual budgets for crane operations, maintenance, and capital projects., • Track and report KPIs including crane availability, MTBF/MTTR, productivity, and cost performance., • Evaluate new technologies, automation opportunities, and equipment investments to improve terminal efficiency., • Participate in long-term planning for berth expansion, crane procurement, and infrastructure upgrades. Qualifications • 7–10+ years of experience in port operations, heavy equipment maintenance, or crane management within a marine terminal or similar industrial environment., • Strong technical knowledge of STS and RTG cranes, including mechanical systems, hydraulics, electrical systems, and PLC controls., • Proven leadership experience managing unionized teams in a 24/7 operation., • Demonstrated success improving equipment reliability, operational productivity, and safety performance., • Ability to interpret engineering drawings, maintenance manuals, and diagnostic data., • Excellent communication, decision-making, and crisis‑management skills., • TWIC eligibility required., • Experience with major crane OEMs (ZPMC, Konecranes, Liebherr, etc.)., • Background in reliability engineering, predictive maintenance technologies, or condition monitoring., • Familiarity with terminal operating systems (TOS) and real-time equipment monitoring platforms., • Project management experience with crane upgrades, retrofits, or new crane commissioning.

Thales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure. Are you a results-driven Service Delivery Manager with a passion for excellence in complex IT environments? Join a world-leading technology company and play a pivotal role in delivering mission-critical Government Program Solutions across software and hardware ecosystems. About the Role As our Service Delivery Manager, you will be the cornerstone of our customer relationships, ensuring every contractual commitment is met, every SLA is exceeded, and every client experience reflects the highest standard of service. You will lead the end-to-end management of support & maintenance contracts covering Thales and third-party solutions, driving satisfaction, performance, and growth. What You'll Do Own the Customer Relationship - Serve as the primary point of contact for Support & Maintenance contracts, building trusted, long-term partnerships with government clients Drive Account Performance - Deliver actionable KPI and SLA reports, provide strategic evolution advice, and identify upsell and contract renewal opportunities Manage Financial Health - Oversee contract financials, track profitability, and ensure sustained customer satisfaction through proactive engagement Govern Third-Party Vendors - Lead communication, performance monitoring, and accountability across all third-party contract partners Lead Incident & Escalation Management - Coordinate incident follow-up, manage critical escalations, and ensure SLA compliance at every stage Oversee Preventive & Corrective Actions - Execute scheduled preventive maintenance, software upgrades, and new release deployments in alignment with contractual obligations What We're Looking For Bachelor's or Master's degree in Engineering, Computer Science, or a related technical field. 5+ years of proven experience as a Service Delivery Manager, or in a relevant role managing complex IT solutions, systems integration, or enterprise computing environments Full professional fluency in English and Spanish (written and spoken). Strong communication and presentation skills - ability to simplify the complex and inspire confidence. * Willingness to travel across LATAM. Nice to have: ITIL, PMP and BPMS certifications. Hybrid role based in Bogotá D.C. (Parque de la 93). Say HI and learn more about working at Thales (Click Here) #LI-JCB #LI-HYBRID At Thales we provide CAREERS and not only jobs. With Thales employing 80,000 employees in 68 countries our mobility policy enables thousands of employees each year to develop their careers at home and abroad, in their existing areas of expertise or by branching out into new fields. Together we believe that embracing flexibility is a smarter way of working. Great journeys start here, apply now!

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented Package Interface Manager - Rail and Transit to join our team! In this role, you'll work on a large Rail and Transit projects in the Northeast. We are looking for someone with strong Systems/Installation/Design experience with Rail Systems. Mechanical, Fire/Life-Safety, Rail Systems, and Rail Interface experience. Systems Integration with Rail Systems. Program background The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project. Program: Major Rail Infrastructure Program Location: New York / New Jersey Metropolitan Area Position Summary: We are seeking a highly experienced and strategic Senior Interface Manager to lead the systems integration and interface management activities for a multi-billion-dollar passenger rail infrastructure program. This critical leadership role is responsible for developing, implementing, and managing the comprehensive framework that ensures all physical, functional, and contractual interfaces between dozens of design packages, construction contractors, and external stakeholders are proactively identified, controlled, and resolved. The successful candidate will be a seasoned professional with a deep understanding of both the technical and commercial complexities of delivering megaprojects in a dense, urban environment. This individual will be accountable for mitigating the significant risks associated with project interfaces and will play a central role in ensuring that all individual project components are successfully integrated into a safe, reliable, and fully functional railroad system. Key Responsibilities: + Own the Interface Management Plan (IMP): Serve as the author and ultimate authority for the program's governing Interface Management Plan, ensuring the framework aligns with industry best practices and contractual requirements. + Lead the Interface Management Team: Manage and mentor a team of Package Interface Managers and Coordinators, providing strategic direction and ensuring consistent application of the IMP across all project contracts. + Govern the Interface Management Process: Oversee the entire interface lifecycle, from early identification in the design phase through formal verification and closeout during testing and commissioning. + Chair Key Governance Meetings: Chair the program-level Interface Management Working Group (IMWG), the highest forum for adjudicating and resolving critical, escalated interface disputes between contractors and stakeholders. + Manage the Master Interface Register (MIR): Maintain the program's single source of truth for all identified interfaces, ensuring the data is accurate, current, and provides clear visibility into the status of the entire interface ecosystem. + Oversee Technical Documentation: Manage the development and baselining of all critical Interface Control Documents (ICDs), ensuring that the technical requirements at all shared boundaries are clearly and unambiguously defined. + Drive Proactive Risk Mitigation: Work closely with the project's Risk Management team to ensure that interface-related risks are identified early, assessed for their potential impact, and have robust mitigation plans in place. + Integrate with Core Project Controls: Ensure the seamless integration of the interface management process with schedule management (linking interface deliverables to the master schedule), change management (controlling changes to baselined interfaces), and systems engineering. Required Qualifications & Experience: + Education: Bachelor's degree in Engineering (Civil, Mechanical, Electrical, or Systems), Construction Management, or a related field is required. A Master's degree or professional engineering (PE) license is highly preferred. + Experience: A minimum of 15 years of progressive experience in project management, systems engineering, or construction management on large-scale, complex infrastructure projects. A minimum of 7-10 years of direct experience in a dedicated interface management role on a megaproject (>$1B) is essential. + Technical Expertise: + Demonstrated experience with major rail and transit projects, including tunnels, stations, and surface alignments. + Deep understanding of the technical interfaces between major railroad systems, including track, signaling, traction power, communications, and rolling stock. + Proven experience managing interfaces across multiple contract delivery models, including Design-Bid-Build (DBB) and Design-Build (DB). + Prior experience with formal Interface Management process, procedures and protocols. + Expert-level proficiency with dedicated Interface Management software (e.g., Coreworx, PIMS, or similar). + Strong leadership skills with a proven ability to manage and mentor teams. + Exceptional communication, negotiation, and conflict resolution skills, with the ability to facilitate agreements between sophisticated and often competing commercial and technical stakeholders. + Expert understanding of integrated project controls, including scheduling, cost management, risk management, and change control. Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $148,300.00 - $266,900.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/ . About Us Parsons is a digitally enabled solutions provider focused on the defense, security, and infrastructure markets. With nearly 75 years of experience, Parsons is uniquely qualified to deliver cyber/converged security, technology-based intellectual property, and other innovative services to federal, regional, and local government agencies, as well as to private industrial customers worldwide. Parsons is an equal opportunity, drug-free employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran/LGBTQ+. For more about Parsons, visit parsons.com and follow us on Facebook, Twitter, LinkedIn, and YouTube.

Versa Products Company, Inc. (VERSA) is a global engineering and manufacturing company specializing in solenoid, pilot, and manually actuated directional control valves and related components. VERSA products are used in valve automation, fluid power, and customized solutions serving industries such as energy, manufacturing, aerospace, and utilities. Our products are built for reliability and performance in the most demanding industrial environments. At VERSA, we thrive in a collaborative environment where curiosity, problem-solving, and accountability drive results. With over 75 years of excellence, we are committed to continuous improvement, exceptional service, and product innovation—backed by our industry-leading 10-year warranty. Position Summary VERSA is seeking an experienced and driven Quality Manager to lead all aspects of product quality, inspection, and quality systems within our manufacturing environment. This role is responsible for ensuring that products, processes, and documentation consistently meet established quality standards. The Quality Manager will partner closely with Manufacturing, Engineering, and Supply Chain to enforce quality requirements, resolve technical issues, and drive continuous improvement. This position plays a critical role in maintaining the Quality Management System (QMS) and ensuring ISO compliance. Summary of Essential Job Functions • Lead and manage all inspection activities, including development of new inspection processes and equipment, • Oversee and maintain the Quality Management System (QMS) and ensure ISO 9001 compliance and audit readiness, • Develop, monitor, and drive improvement of quality KPIs and apply statistical analysis to manufacturing operations, • Manage the non-conformance and corrective action process, ensuring effective root cause analysis and prevention of recurrence, • Collaborate with Manufacturing, Engineering, and Supply Chain to improve product quality and process efficiency, • Review manufacturing procedures and recommend improvements to enhance quality, performance, and reliability, • Conduct internal audits, system audits, and supplier quality assessments to ensure compliance with specifications and standards, • Manage supplier quality performance, including root cause and corrective actions, • Investigate and resolve customer complaints and quality issues in partnership with Sales and Customer Service, • Prepare and maintain quality documentation and reports, including analysis of trends, failures, and corrective actions, • Identify and prioritize opportunities for process improvement, automation, and cost reduction, • Plan and lead training initiatives related to quality systems and procedures, • Partner with senior leadership to establish quality policies, procedures, and strategic goals, • Lead and develop the Quality team (QC inspectors, technicians, QA personnel): o Recruiting, hiring, and training o Assigning and directing work o Performance management and development • Foster cross-functional collaboration and act as a catalyst for continuous improvement and change, • Stay current with industry standards, technologies, and best practices Minimum Requirements • Bachelor’s Degree in Engineering, Business Administration, or related field preferred, • Minimum of 5 years of experience in quality management within a manufacturing environment, • Minimum of 5 years of leadership experience managing teams, • Strong knowledge of: o Quality Management Systems (QMS) o ISO 9001 standards o ERP systems o Mechanical component inspection o Continuous improvement methodologies (Lean, Six Sigma) • Lean Six Sigma Green Belt or Black Belt strongly preferred, • Strong analytical, problem-solving, and data analysis skills, • Excellent communication, interpersonal, and organizational skills, • Proficiency in Microsoft Office and data/reporting tools Abilities Required • Hands-on experience with precision inspection tools (calipers, CMM, Keyence, etc.), • Ability to define problems, collect data, and draw valid conclusions, • Ability to interpret technical instructions, drawings, and specifications, • Strong attention to detail with a bias for action and results, • Ability to work effectively in a dynamic manufacturing environment, • Adaptability in situations involving change, ambiguity, and competing priorities There is a reason many people join VERSA and stay for decades! We are a family-oriented organization with opportunities to grow.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented Package Interface Manager - Rail and Transit to join our team! In this role, you'll work on a large Rail and Transit projects in the Northeast. We are looking for someone with strong Systems/Installation/Design experience with Rail Systems. Mechanical, Fire/Life-Safety, Rail Systems, and Rail Interface experience. Systems Integration with Rail Systems. Program background The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project. Program: Major Rail Infrastructure Program Location: New York / New Jersey Metropolitan Area Position Summary: We are seeking a highly experienced and strategic Senior Interface Manager to lead the systems integration and interface management activities for a multi-billion-dollar passenger rail infrastructure program. This critical leadership role is responsible for developing, implementing, and managing the comprehensive framework that ensures all physical, functional, and contractual interfaces between dozens of design packages, construction contractors, and external stakeholders are proactively identified, controlled, and resolved. The successful candidate will be a seasoned professional with a deep understanding of both the technical and commercial complexities of delivering megaprojects in a dense, urban environment. This individual will be accountable for mitigating the significant risks associated with project interfaces and will play a central role in ensuring that all individual project components are successfully integrated into a safe, reliable, and fully functional railroad system. Key Responsibilities: Own the Interface Management Plan (IMP): Serve as the author and ultimate authority for the program's governing Interface Management Plan, ensuring the framework aligns with industry best practices and contractual requirements. Lead the Interface Management Team: Manage and mentor a team of Package Interface Managers and Coordinators, providing strategic direction and ensuring consistent application of the IMP across all project contracts. Govern the Interface Management Process: Oversee the entire interface lifecycle, from early identification in the design phase through formal verification and closeout during testing and commissioning. Chair Key Governance Meetings: Chair the program-level Interface Management Working Group (IMWG), the highest forum for adjudicating and resolving critical, escalated interface disputes between contractors and stakeholders. Manage the Master Interface Register (MIR): Maintain the program's single source of truth for all identified interfaces, ensuring the data is accurate, current, and provides clear visibility into the status of the entire interface ecosystem. Oversee Technical Documentation: Manage the development and baselining of all critical Interface Control Documents (ICDs), ensuring that the technical requirements at all shared boundaries are clearly and unambiguously defined. Drive Proactive Risk Mitigation: Work closely with the project's Risk Management team to ensure that interface-related risks are identified early, assessed for their potential impact, and have robust mitigation plans in place. Integrate with Core Project Controls: Ensure the seamless integration of the interface management process with schedule management (linking interface deliverables to the master schedule), change management (controlling changes to baselined interfaces), and systems engineering. Required Qualifications & Experience: Education: Bachelor's degree in Engineering (Civil, Mechanical, Electrical, or Systems), Construction Management, or a related field is required. A Master's degree or professional engineering (PE) license is highly preferred. Experience: A minimum of 15 years of progressive experience in project management, systems engineering, or construction management on large-scale, complex infrastructure projects. A minimum of 7-10 years of direct experience in a dedicated interface management role on a megaproject (>$1B) is essential. Technical Expertise: Demonstrated experience with major rail and transit projects, including tunnels, stations, and surface alignments. Deep understanding of the technical interfaces between major railroad systems, including track, signaling, traction power, communications, and rolling stock. Proven experience managing interfaces across multiple contract delivery models, including Design-Bid-Build (DBB) and Design-Build (DB). Prior experience with formal Interface Management process, procedures and protocols. Expert-level proficiency with dedicated Interface Management software (e.g., Coreworx, PIMS, or similar). Strong leadership skills with a proven ability to manage and mentor teams. Exceptional communication, negotiation, and conflict resolution skills, with the ability to facilitate agreements between sophisticated and often competing commercial and technical stakeholders. * Expert understanding of integrated project controls, including scheduling, cost management, risk management, and change control. Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $148,300.00 - $266,900.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/.

Key member of the marketing team responsible for managing the digital marketing programs to support the retail, at-home, and ecommerce business units. He/she will help manage the paid search, email marketing, social media and other digital programs that are important part of overall marketing effort. Digital Marketing Analyst must be hands-on, very analytical and have relevant digital marketing experience in a multi-location retail or service business. Responsibilities: • Direct and manage digital marketing programs including paid search, email marketing, paid social, etc. and coordinating these to support the promotional marketing calendar, • Analyze all results and attribute marketing spend to traffic and sales, • Use SEO and SEM to drive organic and overall website traffic, • Direct and manage all social media efforts with the goal of developing brand ambassadors, brand influencers and indirect referrals, • Monitor competitive activity and develop counter programs to ensure pre-eminence of the BTG brand online, • Led effort to analyze marketing metrics to identify cause-effect relationships and suggest ways to utilize these insights in new campaigns, • Work with other marketing managers to develop and implement marketing campaigns that drive traffic and sales, • Work with creative team to create digital marketing content, • Work with other marketing manager to design consumer research that offer insight into customer behavior and recommend programs that attract new customers Requirements: • Bachelor degree in marketing, economics, mathematics, statistics, sciences or engineering, • 3+ years’ experience in digital marketing in retail, consumer product/service, consulting business, • Multi-channel marketing experience generating and tracking leads, traffic, etc., • Experience in data-driven business culture; experience measuring and attributing marketing spend to results, • Experience with SEO, PPC, content marketing, paid search and social marketing, • Working knowledge of database marketing, email marketing, statistical analysis, • Strong analytical, problem-solving, data manipulation and planning skills, • Strong computer skills including (Excel, Google Analytics, relational databases etc.), • Entrepreneurial, hands-on, and able to work independently, • High level of self-motivation and intellectual curiosity, • Good oral and written communication skills We will invest roughly 3 months setting up the Digital Marketing Analyst for success at BTG. He/she needs to develop a strong knowledge of sales, business and marketing process and relationships and strong instincts for the brand and business. Development plan will be individualized, but will include time in stores understanding the customer, how product is sold, and BTG’s competitive advantage.

Vice President Marketing Vice President of Marketing is responsible for developing a 360-marketing plan and leading and leading a marketing team that supports growth of the retail, shop-at-home, and trade business units. He/she is responsible for developing and executing a comprehensive strategy that builds new customers and drives sales across all channels. He/she must have keen insight of Blinds to Go business and brand strategy and be able to balance short-term results with long-term brand positioning. He/she must be a hands-on manager, an astute analyst and good strategist. He/she must have relevant experience in a multi-location retail or service business with knowledge of lever to drive store traffic and shop at home leads. Responsibilities: · Direct and a manage internal marketing team that includes digital marketing manager and analyst, social media team, creative team, web development team, and regional marketing managers · Develop a 360-marketing plan and calendar that drive business short-term and build brand · Monitor competitive activity and develop counter programs to ensure pre-eminence of the BTG brand online · Develop and sustain a culture that values analytical problem-solving, collaboration, ownership and accountability · Work with other department to lead programs and activities that contribute to growth of business and brand Requirements: · Bachelor’s or master’s degree in marketing, communications, or cognitive sciences, mathematics, statistics, sciences or engineering · 10+ years experience in digital marketing in retail, or consumer product/service business · Multi-channel marketing experience · Experience with SEO, PPC, content marketing, paid search and social marketing · 5+ years management and leadership experience · Working knowledge of database marketing, email marketing, statistical analysis · Strong analytical, problem-solving, data manipulation and planning skills · Strong computer skills including (Excel, Google Analytics, relational databases etc.) · Entrepreneurial, hands-on, and able to work independently · High level of self-motivation and intellectual curiosity · Good oral and written communication skills We will invest 6-9 month onboarding this senior manager to ensure their long-term success at Blinds to Go. He/she Will develop a strong knowledge of sales, business and marketing process and relationships and strong instincts for the brand and business. Development plan will be individualized, but will include time in stores understanding the customer, how product is sold, and BTG’s competitive advantage and mentoring from business owners.

Job Description: We believe in bold ideas, diverse perspectives, and the drive to transform knowledge into impact. Here, your curiosity fuels progress, your voice shapes innovation, and your ambition helps redefine what's possible within science and learning. We are a culture that obsesses over impact, challenges, and drives what's next to power infinite possibilities for our customers, colleagues and society at large. About the Role: Head of Product (Data Analytics & AI) The Opportunity As Group VP, Head of Product, you are the accountable executive owner of Wiley's AI & Data Analytics Business Unit product portfolio-the company's designated second growth engine. The role calls for a product-led operator who pairs strong product craft with commercial instinct to turn strategy into a roadmap that scales based on evidence, not assumption. You own the product portfolio across three connected product lines: AI & Data Analytics Platform Services (including Applied Research Intelligence Platform), Database Solutions (turning Wiley's proprietary reference works and scientific collections into machine-readable data products), and Audience Solutions (evolving advertising and engagement into an AI-powered marketing intelligence product). These are not separate product lines-they share a common platform foundation, and you ensure each area reinforces the others. You report to the Chief AI & Data Analytics Officer and lead product managers and UX across all three product lines. You are the primary interface between commercial GMs and functional leads (Head of Technology, Head of Data Science), partnering with them to turn requirements into capabilities and evidence into roadmap and revenue decisions. Key Responsibilities • Unified Product Strategy & Roadmap: Own an integrated strategy and roadmap across AI & Data Analytics Platform Services, Database Solutions, and Audience Solutions, ensuring the product lines share a common foundation and build on shared capabilities over time., • Commercial Requirements Translation: Own commercial intake, evaluate priorities against strategy, and convert them into a sequenced roadmap with milestones, business cases, and clear launch/hold decisions., • Product Architecture: Design the product architecture to serve corporate buyer demand and near-term revenue opportunities. o Define and sequence Applied Research Intelligence Platform capabilities, including structured extraction and enrichment, knowledge graph construction, enterprise APIs, Model Context Protocol (MCP) access (standard interface for AI agents/tools), rights and entitlements governance, and clean-room execution (privacy-safe analysis environments)., • Lead the productization of Wiley's proprietary scientific collections by transforming legacy-format content into structured, machine-readable, high-margin data products. o Define the product vision for advertising and audience engagement, supported by behavioral analytics that turn Wiley's opted-in first-party audience into sellable insights and signals that inform structured data extraction priorities., • Market Validation & Evidence-Based Prioritization: Define leading indicators for execution and partner with data science and commercial teams to validate the content-depth advantage use case by use case, investing where depth is proven., • Build/Buy/Partner Decisions: Lead the product dimension of the build/buy/partner agenda by defining the commercial framing, strategic rationale, and partner guardrails., • Global Team Management: Lead and develop a high-performing, multi-disciplinary product organization spanning product management, UX, and product strategy, and build the processes and culture required for software-led, enterprise-grade execution., • Strategic Collaboration: Partner with the General Manager, commercial leaders, Head of Data Science, and Head of Technology to ensure the product strategy and roadmap realize the division's AI-powered vision. Required Experience & Qualifications • Enterprise Product Leadership: 15+ years of product management experience, with at least 7 years leading product organizations in enterprise SaaS, data products, or AI/ML platforms. Demonstrated track record of owning a product portfolio from early-stage validation through scaled commercial deployment including revenue achievements, including defining pricing architecture, access models, and product economics., • Commercial Strategy & Positioning: Ability to translate complex technical features into clear, outcome-based value propositions for different buyer personas (e.g., C-Suite vs. End User). Maintain a "Battlecard" mentality; stay ahead of market shifts and competitor movements to influence pricing and packaging strategies. Experience in designing and iterating SaaS pricing models (usage-based, seat-based, or tiered) to maximize Net Revenue Retention (NRR)., • Data & AI Product Depth: Proven experience building and commercializing data products (structured datasets, APIs, knowledge graphs, AI-powered analytics) for enterprise buyers in regulated markets. You understand provenance, rights governance, and compliance (GDPR, CCPA) as product requirements., • Corporate R&D Market Experience: Familiarity with corporate R&D buyers in pharma, biotech, engineering, or adjacent verticals - including their procurement cycles, enterprise integration expectations, and the competitive landscape., • Platform Thinking: Demonstrated ability to run a multi-product portfolio on a shared platform foundation, avoiding one-off solutions that are costly to maintain and don't create long-term customer or revenue value., • Commercial Instinct: Strong grasp of product economics (usage-based pricing, tiered subscriptions, API monetization, data licensing, access controls and usage tracking) and ability to tie product decisions to ARR, NRR, and unit economics., • Interpersonal & Organizational Complexity: Proven ability to lead through shared accountability across commercial, data science, and engineering stakeholders., • Technical Literacy: Working knowledge of modern data stack technologies, API product design, and enterprise integration architectures., • Analytics & Experimentation: Proficiency in product analytics, A/B experimentation, and evidence-based prioritization methodologies., • Enterprise Compliance: Familiarity with enterprise security and privacy standards (SOC2 Type II, ISO 27001, GDPR/CCPA) as product design requirements. We power infinite possibilities. For more than 200 years, we've transformed knowledge into discoveries that shape the world. Today, our global team of innovators, creators, and experts is driving what's next in science, education, and publishing-creating impact that reaches everywhere. We're not just observers of progress. We're the ones accelerating scientific breakthroughs, advancing learning, and sparking innovation that redefines entire fields and improves lives. Here, your talent matters. Your ideas have room to grow. And your work creates breakthroughs that can change everything. Wiley is an equal opportunity/affirmative action employer. We evaluate all qualified applicants and treat all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, protected veteran status, genetic information, or based on any individual's status in any group or class protected by applicable federal, state or local laws. Wiley is also committed to providing reasonable accommodation to applicants and employees with disabilities. Applicants who require accommodation to participate in the job application process may contact tasupport@wiley.com for assistance. We are proud that our workplace promotes continual learning and internal mobility. Our values support courageous teammates, needle movers, and learning champions all while striving to support the health and well-being of all employees. We offer meeting-free Friday afternoons allowing more time for heads down work and professional development, and through a robust body of employee programing we facilitate a wide range of opportunities to foster community, learn, and grow. We are committed to fair, transparent pay, and we strive to provide competitive compensation in addition to a comprehensive benefits package. The range below represents Wiley's good faith and reasonable estimate of the base pay for this role at the time of posting roles either in the United Kingdom, Canada or USA. It is anticipated that most qualified candidates will fall within the range, however the ultimate salary offered for this role may be higher or lower and will be set based on a variety of non-discriminatory factors, including but not limited to, geographic location, skills, and competencies. When applying, please attach your resume/CV to be considered. Salary Range: 218,900 USD to 328,567 USD#LI-JL1 Job Posting Title: Group Vice President, Product Management Location: Hoboken (HQ), NJ, USA

Job Description: We believe in bold ideas, diverse perspectives, and the drive to transform knowledge into impact. Here, your curiosity fuels progress, your voice shapes innovation, and your ambition helps redefine what's possible within science and learning. We are a culture that obsesses over impact, challenges, and drives what's next to power infinite possibilities for our customers, colleagues and society at large. About the Role: We are looking for a Senior Manager, Product Management to lead the product function for Wiley's Clinical Outcome Assessment (COA) platform suite, part of our AI and Data Analytics organisation. The role owns the multi-product roadmap for our COA platform portfolio, including the foundational COA database that holds Wiley's clinical measurement intellectual property, and a suite of customer-facing platform products that surface, score, and contextualise that content for pharmaceutical and CRO customers. The role manages an offshore engineering team and works closely with our scientific affairs, commercial, and AI specialists to translate clinical and customer needs into deliverable product. The role reports to the Senior Director, Clinical Outcome Assessments. Job Responsibilities Own and maintain the multi-product roadmap for the COA platform suite, sequenced against commercial milestones and supported by clear prioritisation criteria. Manage an offshore engineering team, including hiring, performance management, capability development, and the day-to-day operating model across time zones. Lead end-to-end product delivery, from discovery and definition through release, instrumentation, and iteration based on customer feedback and product analytics. Partner with engineering on architecture, technology choices, and AI-enabled features, including LLM integration, retrieval, and content tooling. Work alongside scientific affairs, commercial, and the broader AI and Data Analytics product community to ensure platform decisions are clinically sound, commercially relevant, and aligned with shared standards. Own data integrity, intellectual property handling, and data privacy controls across the platform suite, including alignment with regulatory expectations for clinical measurement. Required Qualifications Bachelor's degree or equivalent professional experience. Significant product management experience on B2B software platforms, data products, or specialist enterprise applications. Demonstrated track record managing engineering teams, including offshore or distributed teams. Experience owning a multi-product roadmap and delivering against committed milestones. Direct experience shipping AI-enabled product features, such as LLM integration, retrieval-based applications, or other generative or predictive AI capabilities. Working knowledge of AI and machine learning tooling, including vector databases and LLM-based product patterns. Sound judgement on where AI capability genuinely improves a product versus where it adds risk or complexity without proportionate value. Strong technical depth: comfortable with architecture conversations, build versus buy decisions, and technical trade-offs. Strong stakeholder management and the ability to communicate complex product and technical concepts to non-technical audiences. Preferred Qualifications Postgraduate degree in computer science, life sciences, health informatics, or business. Direct experience in clinical research, healthcare data, life sciences, or pharmaceutical platforms. Experience working with Clinical Outcome Assessment (COA) tools, electronic COA (eCOA), or real world evidence. Familiarity with healthcare data standards (FHIR, HL7, CDISC) and clinical data structures. Familiarity with model evaluation, prompt engineering, and AI safety considerations in product contexts. Understanding of copyright and intellectual property frameworks for clinical content. Experience working in regulated data environments (clinical, healthcare, pharmaceutical). We power infinite possibilities. For more than 200 years, we've transformed knowledge into discoveries that shape the world. Today, our global team of innovators, creators, and experts is driving what's next in science, education, and publishing-creating impact that reaches everywhere. We're not just observers of progress. We're the ones accelerating scientific breakthroughs, advancing learning, and sparking innovation that redefines entire fields and improves lives. Here, your talent matters. Your ideas have room to grow. And your work creates breakthroughs that can change everything. Wiley is an equal opportunity/affirmative action employer. We evaluate all qualified applicants and treat all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, protected veteran status, genetic information, or based on any individual's status in any group or class protected by applicable federal, state or local laws. Wiley is also committed to providing reasonable accommodation to applicants and employees with disabilities. Applicants who require accommodation to participate in the job application process may contact tasupport@wiley.com for assistance. We are proud that our workplace promotes continual learning and internal mobility. Our values support courageous teammates, needle movers, and learning champions all while striving to support the health and well-being of all employees. We offer meeting-free Friday afternoons allowing more time for heads down work and professional development, and through a robust body of employee programing we facilitate a wide range of opportunities to foster community, learn, and grow. We are committed to fair, transparent pay, and we strive to provide competitive compensation in addition to a comprehensive benefits package. The range below represents Wiley's good faith and reasonable estimate of the base pay for this role at the time of posting roles either in the United Kingdom, Canada or USA. It is anticipated that most qualified candidates will fall within the range, however the ultimate salary offered for this role may be higher or lower and will be set based on a variety of non-discriminatory factors, including but not limited to, geographic location, skills, and competencies. When applying, please attach your resume/CV to be considered. Salary Range: 58,400 GBP to 84,333 GBP#LI-CW1 Job Posting Title: Senior Manager, Product Management Location: London (Fitzroy Square), GBR

Come work at a place where innovation and teamwork come together to support the most exciting missions in the world! Come work at a place where innovation and teamwork come together to support the most exciting missions in the world! Maintain a strong crossdepartment operational rhythm, translate sales team needs into clear business requirements, and develop reporting that tracks performance and delivers actionable insights. Support global sales teams through highquality project execution, wellstructured enablement training, and consistent sharing of best practices. This role sits within Revenue Operations and plays a pivotal part in unifying GTM execution across all global regions, grounded in datadriven rigor and largescale change management. Description: The Sales Operations Manager serves as a strategic and operational partner to Sales and Revenue leadership, driving efficiency, visibility, and performance across the organization. The role focuses on strengthening processes, systems, analytics, and crossfunctional alignment to enable a highperforming, scalable sales engine. The ideal candidate brings together project management expertise, handson systems knowledge (such as Salesforce, Gong, leadrouting platforms, etc.), strong collaboration skills, and sharp analytical judgment. This combination, paired with a deep understanding of GTM execution, positions the role as a cornerstone in building and scaling the company's sales infrastructure. Key Responsibilities: • Apply strong Salesforce technical expertise to scope and design solutions while maintaining a strong crossdepartment operational rhythm, translating sales needs into clear requirements and project plans, leading endtoend Salesforce delivery, managing the backlog and user stories, coordinating with BizApps/engineering, driving successful sprints, UAT, deployments, reporting and global postlaunch adoption to support sales revenue goals., • Manage the Salesforce feature request pipeline, including requirements gathering, prioritization, backlog management, and coordination with crossfunctional teams. Ensure data integrity, system adoption, and workflow automation., • Build, optimize, and maintain Salesforce reports and dashboards that deliver accurate, timely insights into pipeline health, forecasting, and sales performance., • Partner with Sales, Marketing, RevOps, and BizApps to translate business needs into scalable Salesforce & GTM software solutions that ensure smooth rollout of new features. Support initiatives for lead funnel optimization, pipeline management and sales workflows., • Oversee crossplatform systems execution with business stakeholders & BizApps, ensuring stable integrations and consistent workflow processes across the GTM tech stack including: Salesforce, lead routing tools, AIdriven revenue acceleration platforms, CMS systems, Confluence/Jira, etc., • Project portfolio management- manage the CRM & other sales roadmap and backlog priorities, overseeing timelines, resources and deliverables and risk mitigation. Ensure initiatives are delivered on time and aligned with stakeholder expectations., • Develop documentation and operational rigor by building and maintaining clear requirementsgathering materials and sales training collateral that make system processes understandable and globally repeatable across all platforms., • Align crossfunctional stakeholders to ensure core GTM tools are consistently and effectively adopted across all sales roles (AEs, BDRs, TAMs, Channel Managers, etc.), embedding these tools into daily operating rhythms., • Partner with Sales Leadership to define KPIs, strengthen accountability, and support execution toward revenue targets while advancing key strategic initiatives. Requirements: • 8+ years of experience in sales operations, revenue operations, or business operations implementing Salesforce and lead routing solutions globally (preferably in SaaS software industry). Proven managerial experience., • Highly organized, detail-oriented, and capable of driving multiple priorities in a fast-paced environment., • Strong analytical mindset with the ability to break down complex business problems and communicate clear, datadriven recommendations, including the ability to create materials for C-suite or board-level audiences., • A strong grasp of sales processes, revenue forecasting, GTM strategy, and the way orders move through sales order entry systems., • Experience working in fast-paced organizations, with a track record of driving impact across cross-functional teams., • Extensive experience in process design, standardization and continuous improvement, with ability to translate business needs into actionable priorities., • Proven experience leading workflow optimization and automation initiatives within sales or customerfacing functions., • Advanced proficiency & working knowledge of Salesforce, Gong, lead routing tools, CMS platforms, funnel analytics, building reports via PowerBI, Tableau, etc. #LI-Remote Qualys is an Equal Opportunity Employer, please see our _.

Posting Type Hybrid/Remote Job Overview The Senior Manager of Enterprise Security is a technical people leader responsible for developing, implementing, operating, and continuously optimizing a multi-layered security ecosystem across corporate, cloud, and product environments. This role drives a defense-in-depth strategy, embeds security into AI-augmented SecDevOps and continuous compliance programs, and leads a living, learning, and adaptive security function that evolves with the threat, regulatory, and business landscape. In partnership with Engineering, IT, Legal, and Governance, Risk, and Compliance, this leader translates security strategy into measurable outcomes that scale with the business. Job Description and Requirements Defense in Depth & Security Operations Architect and own thetactical execution ofenterprise defense-in-depthstrategy aligned with security strategic intent: define layered controls across network, endpoints, identity, cloud workloads, and data,witheffective layeredcontrols at every tier and coverage mapped torelevant frameworks. Design and operate an integrated detection stack (EDR, NDR, CDR, SIEM/SOAR) with AI-enabledUEBA, ML-based alert prioritization, and automated enrichment to reduce MTTD and MTTRand increase defense in depth efficacy. EnforceadaptiveZero Trust principles (ZTNA, least-privilege micro-segmentation, phishing-resistant MFA/FIDO2, JIT access) and SASE/SSE architecture across all access paths. Ensure configuration and implementation of hardeningstandards using CIS Benchmarks/DISA STIGs with automated compliance validation, and maintain IR playbooks covering ransomware, supply chain compromise, cloud account takeover, and AI/ML model poisoning. AIDevSecOps & Secure Development Build and operate an AI-augmentedDevSecOps program: embed SAST, DAST, SCA, secret scanning, IaC analysis, and container image securityinto CI/CD pipelines with AI-generated fix recommendations surfaced in PR workflows. Deploy AI-assisted threat modeling, exposure analysis and exploit validation methodsand establishgenerative and agentic AI security &governancemethodologies. Run a security champions program embedding technical advocates in engineering teams to own secure coding standards, security debt backlog management, and threat model participation. Cloud, Vulnerability & Threat Intelligence Lead, implement and optimize cloud securityprograms across multi-cloud environments with automated drift detection, policy-as-code enforcement, and runtime workload protection. Run a risk-basedexposuremanagement programwiththreat intelligencecontext to prioritize remediation SLAs; operate continuous ASM. Integrate threat intelligence (OSINT, commercial feeds, ISAC) intopurple teaming efforts andconduct or overseepurple team engagements mapped toevolving threat landscape. Governance, Strategy & Collaboration Define and track security KPIs grounded in technical outcomes: patch SLA compliance, control coverage heat maps, mean dwell time, lateral movement detection rates, and pipeline gate trends. Work with the information security GRC function to adapt and evolvesecurity policies, technical standards, and control baselines aligned toSOX,SOC 2, ISO 27001, HIPAA, GDPR, and CCPA;to hedge risk associated with evolving regulatory landscape. Partner with Compliance and Legal on audits, certifications, e-discovery, and forensic integrity requirements; translate technical risk into quantitative business impact using frameworks such as FAIR. Serve as a trusted technical advisor to executives and architects; embed security into technology roadmaps, M&A due diligence, and vendor risk assessments. People Management Responsibilities • Builds, coaches, and retains a high-performing, technically elite security team. Creates an environment of psychological safety, accountability, and engineering excellence with clear career paths spanning technical specialization and leadership. Drives structured performance management, proactive talent development, and inclusive leadership practices to keep the team motivated and equipped to deliver exceptional outcomes. Minimum Qualifications: Bachelor's degree in Computer Science, Information Security,a related field,orequivalent hands-on experience considered. 10+ years in enterprise or product security with 4+ years in a senior technical leadership role owning multi-domain programs. Hands-on technical depth:network security, detection engineering, incident response, endpoint management, custom scripting and telemetry engineering Proven defense-in-depth/ layered defensedesign experience: evaluating and improving layered control effectiveness across network, endpoint, identity, cloud, and application domains. Practical experience with AI-augmented security: ML-based detection, SOAR automation, or AI-integrated DevSecOps pipelines. Mastery of NIST CSF, MITRE ATT&CK, CIS Controls, Zero Trust (NIST SP 800-207), and cloud security frameworks (AWS, Azure, or GCP). Demonstrated ability to communicate technical security risk and architectural trade-offs to both technical peers and executive audiences. Hybrid (2+ days in office) or remote based on company policy. Preferred Qualifications: Experience securing SaaS, cloud-native, or globally distributed regulated environments. Familiarity with legal technology, e-discovery, litigation holds, and digital forensics chain-of-custody requirements. Experience with LLM/AI security: prompt injection, model poisoning, AI output validation, and governance for AI-assisted code generation. Scripting and automation skills (Python, Bash, PowerShell) applied to detection engineering, tooling integration, or compliance automation. Certifications such as CISSP, CISM, OSCP, GCIH, GCFA, CCSP, or AWS Security Specialty. Relativity is committed to competitive, fair, and equitable compensation practices. This position is eligible for total compensation which includes a competitive base salary, an annual performance bonus, and long-term incentives. The expected salary range for this role is between following values: $185,000 and $277,000 The final offered salary will be based on several factors, including but not limited to the candidate's depth of experience, skill set, qualifications, and internal pay equity. Hiring at the top end of the range would not be typical, to allow for future meaningful salary growth in this position. Required Skills: Access Management, Defense in Depth, Network Security, Project Management, Risk Management, Security Architecture Design, Security Audit, Security Awareness, Security Engineering, Security Operations, Vulnerability Management

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping and snow removal, we enable desired outcomes for our clients through consistent service and outstanding people. Pritchard Industries is seeking a skilled and dedicated Building Engineer to join our team. The Building Engineer will be responsible for maintaining the operational functionality of building systems, including HVAC, electrical, plumbing, and mechanical systems, across a variety of commercial properties. This role requires strong technical expertise, diligence, and the ability to diagnose and troubleshoot system issues to ensure the efficient and safe operation of the facilities. Responsibilities • Operate, monitor, and maintain in good working order and condition, the heating, ventilation, air conditioning, plumbing and electrical systems, and all other equipment related to the mechanical and electrical plant of the building., • Operate, test, manage and maintain all property systems and equipment., • Prepare, maintain, and regularly review logs for service, repair, operation, and complaints related to the equipment. Make recommendations on the proper care, procedure, and methods of operating the equipment in a safe and efficient manner., • Develop and maintain in operation, a program for preventive maintenance of the mechanical/electrical equipment and critical site systems. Maintain equipment according to the recommendations of the equipment manufacturer and is responsible for communicating with the systems/equipment manufacturers to obtain necessary data and literature for development of written preventative maintenance procedures, operating instructions, schedules, etc., • Comply with The Federal Occupational Safety and Health Act and all other applicable government rules and regulations. Material Safety Data Sheet ("MSDS") shall be kept and maintained. Engineers shall comply with all safety practices and procedures., • The Engineer shall recommend, propose, and implement, operational mode changes whenever feasible to affect maximum conservation of energy and "green" products, as well as implement the Demand Response load shedding program as tests and events are called., • Maintain in neat, clean, and painted condition all areas containing building systems and equipment., • Oversee any special maintenance, repairs or other work to the systems and equipment performed by others., • Maintain and manage an ongoing comprehensive preventive maintenance program for all building systems and equipment., • Monitor and evaluate the energy consumption of the Property and shall recommend additions, replacements, enhancements or modifications to existing equipment or systems in order to maximize energy efficiency., • Maintain a daily log of activates and operations. Keep records of equipment documents, preventive maintenance, major repairs, energy management and projects. Maintain records regarding any regulated programs such as asbestos maintenance, indoor air quality and refrigerant management., • Perform or oversee any testing, inspection, registration or certification for the building equipment or systems., • Make monthly written reports to Manager. Perform an annual audit of the engineering operation and provide a written report of findings and recommendations. EDUCATION / EXPERIENCE / LICENSES • High School Diploma of GED Equivalent, • 7+ years of related work experience in operating Commercial Building, • Experience with Mechanical, Electrical, Plumbing and Fire Life Safety Systems, • Posses and maintain a valid driver's license and safe driving record. DESIRED CHARACTERISTICS / DESIRED QUALIFICATIONS • Familiarity with automated building controls, preventive maintenance techniques and knowledge of pneumatic controls, • Must work well under pressure., • Meticulous and ability to function in a demanding environment., • Must possess the ability to manage multiple priorities., • Collaborator who can also work independently and is a initiative-taker., • Effective communication skills, • Computing Skills in Outlook, Excel & Word, • Excellent written and verbal communication skills., • Strong organizational and analytical skills., • Ability to provide efficient, timely, dependable, and courteous service to all customers., • Ability to effectively present information., • Ability to respond effectively to sensitive issues., • Ability to comprehend, analyze, and interpret complex documents., • Ability to solve problems involving several options in situations. Other Skills Physical requirements include stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. Intermediate skills with Microsoft Office Suite. Ability to manage multiple projects and make decisions. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties. Benefits • Salary: $ 35.75, • Full-Time - DAY TIME TBD, • UNION BENEFITS Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description What is it like to work at BAE Systems?" Imagine being part of a team that designs, develops, and delivers cutting-edge products that make a tangible impact on national security and defense. At BAE Systems, you'll collaborate with talented professionals who share your passion for innovation and excellence, and have opportunities to grow and develop your skills in a dynamic and fast-paced environment. Our flexible work environment provides you a chance to change the world without giving up your personal life. We put our customers first - exemplified by our mission: "We Protect Those Who Protect Us®." Sound like a team you want to be a part of? Come build your career with BAE Systems. BAE Systems Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance Systems (C4ISR) business area is seeking a Program Quality Manager in the Adaptive Communications & Sensing Product Line. Our Quality Management team plays a critical role in ensuring the reliability and performance of our C4ISR Systems, which are used by military and government agencies around the world. Responsibilities:\n • Lead quality engineering efforts to develop and implement quality plans, procedures, and standards for C4ISR programs\n, • Collaborate with cross-functional teams to identify and mitigate quality risks, and implement corrective actions as needed\n, • Supervise and develop a team of quality engineers, providing technical guidance and expertise\n, • Ensure compliance with customer and regulatory requirements, including AS9100\n, • Analyze and resolve complex quality issues, and implement process improvements to enhance quality and efficiency\n\n Required Education, Experience, & Skills \n • Bachelor's Degree and 6-8+ years of engineering/technical experience or 10-12+ years of engineering/technical experience in lieu of degree\n, • Proven leadership experience as a manager, supervisor, or mentor\n, • Communication in a clear, concise and professional manner with multiple customers in different organizations, functions and the US Government\n, • Interpersonal communication in verbal and written formats\n, • Proficient in Microsoft Office Applications including word, excel, power point\n, • Ability to learn BAE Systems software and data management programs\n, • Proven ability to work in a multi-disciplined team\n, • Ability to work independently with little to no oversight\n, • Producting high quality work in a face paced, dynamic work environment\n, • Customer Requirements and flow down into program execution and tasking\n\n Preferred Education, Experience, & Skills \n • Bachelor's Degree in an Engineering or Technical field\n, • Active secret clearance\n, • Prior Quality Assurance Engineering experience\n, • Prior Quality Management experience\n, • Program process definition and documentation\n, • Green Belt/ Black Belt certification\n, • Hands on experience in a Defense Contracting Environment\n, • AS9145- Advanced Product Quality Program exposure\n, • Manufacturing of complex electronic assemblies\n, • Presentation of product to customer for acceptance/ "sell off"\n, • Hardware Inspection Criteria\n, • Quality Management Systems (AS9100)\n, • Quality Auditing\n, • Configuration Control and Hardware Configuration Reporting\n, • Participation Root Cause Corrective Action (RCCA) activities\n\n Pay Information Full-Time Salary Range: $145049 - $246584 Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics. About BAE Systems Electronic Systems BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve. This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping and snow removal, we enable desired outcomes for our clients through consistent service and outstanding people. Pritchard Industries is seeking a skilled and dedicated Building Engineer to join our team. The Building Engineer will be responsible for maintaining the operational functionality of building systems, including HVAC, electrical, plumbing, and mechanical systems, across a variety of commercial properties. This role requires strong technical expertise, diligence, and the ability to diagnose and troubleshoot system issues to ensure the efficient and safe operation of the facilities. Responsibilities • Operate, monitor, and maintain in good working order and condition, the heating, ventilation, air conditioning, plumbing and electrical systems, and all other equipment related to the mechanical and electrical plant of the building., • Operate, test, manage and maintain all property systems and equipment., • Prepare, maintain, and regularly review logs for service, repair, operation, and complaints related to the equipment. Make recommendations on the proper care, procedure, and methods of operating the equipment in a safe and efficient manner., • Develop and maintain in operation, a program for preventive maintenance of the mechanical/electrical equipment and critical site systems. Maintain equipment according to the recommendations of the equipment manufacturer and is responsible for communicating with the systems/equipment manufacturers to obtain necessary data and literature for development of written preventative maintenance procedures, operating instructions, schedules, etc., • Comply with The Federal Occupational Safety and Health Act and all other applicable government rules and regulations. Material Safety Data Sheet ("MSDS") shall be kept and maintained. Engineers shall comply with all safety practices and procedures., • The Engineer shall recommend, propose, and implement, operational mode changes whenever feasible to affect maximum conservation of energy and "green" products, as well as implement the Demand Response load shedding program as tests and events are called., • Maintain in neat, clean, and painted condition all areas containing building systems and equipment., • Oversee any special maintenance, repairs or other work to the systems and equipment performed by others., • Maintain and manage an ongoing comprehensive preventive maintenance program for all building systems and equipment., • Monitor and evaluate the energy consumption of the Property and shall recommend additions, replacements, enhancements or modifications to existing equipment or systems in order to maximize energy efficiency., • Maintain a daily log of activates and operations. Keep records of equipment documents, preventive maintenance, major repairs, energy management and projects. Maintain records regarding any regulated programs such as asbestos maintenance, indoor air quality and refrigerant management., • Perform or oversee any testing, inspection, registration or certification for the building equipment or systems., • Make monthly written reports to Manager. Perform an annual audit of the engineering operation and provide a written report of findings and recommendations. EDUCATION / EXPERIENCE / LICENSES • High School Diploma of GED Equivalent, • 7+ years of related work experience in operating Commercial Building, • Experience with Mechanical, Electrical, Plumbing and Fire Life Safety Systems, • Posses and maintain a valid driver's license and safe driving record. DESIRED CHARACTERISTICS / DESIRED QUALIFICATIONS • Familiarity with automated building controls, preventive maintenance techniques and knowledge of pneumatic controls, • Must work well under pressure., • Meticulous and ability to function in a demanding environment., • Must possess the ability to manage multiple priorities., • Collaborator who can also work independently and is a initiative-taker., • Effective communication skills, • Computing Skills in Outlook, Excel & Word, • Excellent written and verbal communication skills., • Strong organizational and analytical skills., • Ability to provide efficient, timely, dependable, and courteous service to all customers., • Ability to effectively present information., • Ability to respond effectively to sensitive issues., • Ability to comprehend, analyze, and interpret complex documents., • Ability to solve problems involving several options in situations. Other Skills Physical requirements include stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. Intermediate skills with Microsoft Office Suite. Ability to manage multiple projects and make decisions. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties. Benefits • Salary: $ 35.75, • Full-Time - DAY TIME TBD, • UNION BENEFITS Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Pritchard Industries is a dynamic and innovative provider of comprehensive facility services, dedicated to enhancing the operational efficiency of our client partners in the industries we serve. With services from facility maintenance and janitorial to landscaping and snow removal, we enable desired outcomes for our clients through consistent service and outstanding people. Pritchard Industries is seeking a skilled and dedicated Building Engineer to join our team. The Building Engineer will be responsible for maintaining the operational functionality of building systems, including HVAC, electrical, plumbing, and mechanical systems, across a variety of commercial properties. This role requires strong technical expertise, diligence, and the ability to diagnose and troubleshoot system issues to ensure the efficient and safe operation of the facilities. Responsibilities • Operate, monitor, and maintain in good working order and condition, the heating, ventilation, air conditioning, plumbing and electrical systems, and all other equipment related to the mechanical and electrical plant of the building., • Operate, test, manage and maintain all property systems and equipment., • Prepare, maintain, and regularly review logs for service, repair, operation, and complaints related to the equipment. Make recommendations on the proper care, procedure, and methods of operating the equipment in a safe and efficient manner., • Develop and maintain in operation, a program for preventive maintenance of the mechanical/electrical equipment and critical site systems. Maintain equipment according to the recommendations of the equipment manufacturer and is responsible for communicating with the systems/equipment manufacturers to obtain necessary data and literature for development of written preventative maintenance procedures, operating instructions, schedules, etc., • Comply with The Federal Occupational Safety and Health Act and all other applicable government rules and regulations. Material Safety Data Sheet ("MSDS") shall be kept and maintained. Engineers shall comply with all safety practices and procedures., • The Engineer shall recommend, propose, and implement, operational mode changes whenever feasible to affect maximum conservation of energy and "green" products, as well as implement the Demand Response load shedding program as tests and events are called., • Maintain in neat, clean, and painted condition all areas containing building systems and equipment., • Oversee any special maintenance, repairs or other work to the systems and equipment performed by others., • Maintain and manage an ongoing comprehensive preventive maintenance program for all building systems and equipment., • Monitor and evaluate the energy consumption of the Property and shall recommend additions, replacements, enhancements or modifications to existing equipment or systems in order to maximize energy efficiency., • Maintain a daily log of activates and operations. Keep records of equipment documents, preventive maintenance, major repairs, energy management and projects. Maintain records regarding any regulated programs such as asbestos maintenance, indoor air quality and refrigerant management., • Perform or oversee any testing, inspection, registration or certification for the building equipment or systems., • Make monthly written reports to Manager. Perform an annual audit of the engineering operation and provide a written report of findings and recommendations. EDUCATION / EXPERIENCE / LICENSES • High School Diploma of GED Equivalent, • 7+ years of related work experience in operating Commercial Building, • Experience with Mechanical, Electrical, Plumbing and Fire Life Safety Systems, • Posses and maintain a valid driver's license and safe driving record. DESIRED CHARACTERISTICS / DESIRED QUALIFICATIONS • Familiarity with automated building controls, preventive maintenance techniques and knowledge of pneumatic controls, • Must work well under pressure., • Meticulous and ability to function in a demanding environment., • Must possess the ability to manage multiple priorities., • Collaborator who can also work independently and is a initiative-taker., • Effective communication skills, • Computing Skills in Outlook, Excel & Word, • Excellent written and verbal communication skills., • Strong organizational and analytical skills., • Ability to provide efficient, timely, dependable, and courteous service to all customers., • Ability to effectively present information., • Ability to respond effectively to sensitive issues., • Ability to comprehend, analyze, and interpret complex documents., • Ability to solve problems involving several options in situations. Other Skills Physical requirements include stooping, standing, climbing and frequent lifting of a minimum of 50 lbs. Intermediate skills with Microsoft Office Suite. Ability to manage multiple projects and make decisions. May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties. Benefits • Salary: $ 35.75, • Full-Time - DAY TIME TBD, • UNION BENEFITS Pritchard Industries participates in E-Verify. EEO Notice: Pritchard Industries is an Equal Opportunity Employer and will consider all qualified applicants without regard to race, color, creed, genetic information, religion, national origin, ethnicity, gender; gender identity, sexual orientation, pregnancy, childbirth or related medical condition, age, disability, or handicap, servicemember status, relationship or association with a protected veteran, and any other category protected by Federal, state, or local law. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Position Summary This Electrical Engineering position manages the installation and maintenance of all electrical systems for H5 Data Centers and operations of specialized power systems. Act as an Engineering resource for the complete H5 portfolio of mission critical facilities. Responsible for Engineering standards, project scope definition, high level schematic design, engineering document review and construction support along with commissioning and turn-over to Operations. Maintains design and process documentation. Provides full life-cycle support to H5 Data Centers from concept design through site implementation and operations. Continuingly evaluate new and existing technologies for value. Some travel required. This position reports to the Senior Vice President. Essential Job Functions: • Participate in all aspects of electrical design and engineering including development of basis of design, scope of work, implementation processes and commissioning plans., • Work with internal teams and 3rd party engineering firms to select the right designs/equipment on projects/master plan including development of best standards., • Schedules and leads maintenance of national power systems to ensure 100% system availability., • Develops or reviews maintenance procedures for all power systems including detailed scripts for annual maintenance and projects., • Develop and manage processes and programs to ensure the health and efficiency of power systems within the data centers., • Be a subject matter expert on electrical items to help H5 effectively win new business., • Lead, review, and approve designs for data center upgrades which improve availability and efficiency, in addition to capacity increases and monitoring., • Support Operational teams in problem resolutions, Root Cause Analysis and design and process reviews., • Provide immediate technical support to operation teams during critical events, on-call., • Administers all aspects of the national electrical service agreements and vendors to ensure compliance., • Subject matter expert on electrical systems with customers effectively winning new business for H5 Data Centers., • Manages Electrical Sustainability program and utility power contracts and hedging. Qualifications: Education: • Bachelor’s degree in electrical engineering or equivalent experience. Experience: • Minimum 5 years in data center electrical design, commissioning, and critical system support., • Experience in Data Center design, construction and commissioning including high voltage substations, complex power distribution systems, Battery and back-up systems, automation, and control systems., • Experience reading, interpreting, and creating construction drawings, specifications, and submittal documents., • Understanding of data center electrical operations procedures, topologies (N+1, 2N, 3/ 2N, Catcher, etc.), equipment, switchgear and transformers, UPS, generators, etc., • Ability to refine electrical system designs for availability, quality control, constructability, and cost efficiency., • Understanding of both mechanical and electrical equipment and system design., • Project Manager experience is a plus. Skills and Abilities: • Effective oral and written communication skills, with top tier analytical and problem-solving abilities., • Organized, detailed and successful at setting priorities and meeting deadlines and budget., • Comprehensive use of AutoCAD, Visio, and Office software packages.

Job Description Build Your Career. Build Your Legacy. At Western Specialty Contractors, You're an Owner. For more than 110 years, Western Specialty Contractors has been building more than projects—we've been building people, careers, and communities. Founded in St. Louis and proudly employee‑owned through our ESOP, we are the nation's largest specialty contractor, restoring and protecting building envelopes through expertise in facades, concrete, roofing, and waterproofing. Why Western? As an employee-owned company, you're not just working for Western—you're working with Western. Every team member has a stake in our success. That ownership mindset fuels a culture where people look out for each other, take pride in their work, and know their contributions truly matter. Grow With Us With 30+ branches nationwide, Western offers opportunities to build a career that grows with you. From hands-on field experience to specialized training and leadership development, we invest in your future at every stage. Position Overview The Region Business Development Manager assists branch personnel in achieving annual sales objectives by providing marketing, sales, and business development leadership. This candidate will work with specific branches within an assigned region. The position is a primary resource to meet and/or exceed the corporate objectives of sales volume growth, customer development, and new business acquisition, working closely with the corporate National Account Department as a resource for local and regional contacts. Job Responsibilities • Establish productive, professional relationships with key local/regional decision makers at targeted accounts as determined by branch personnel, • Coordinates closely with Western personnel, making appropriate introductions to key client contacts to assist with local account development based on the annual marketing plans, • Strong participation in professional trade associations, including committee participation (ex. Ashe, APPA, BOMA, IREM), • Identify, research, and network with potential new accounts within the assigned region, • Lead expansion into new recession-proof markets to support the overall growth strategy, • Review and analyze results of past campaigns to facilitate the development of new initiatives and partnerships within the market, • Schedule, coordinate, and present educational and persuasive seminars, presentations, workshops, and customer appreciation events, • Develop ideas on how to close existing opportunities with branch personnel, • Work with Corporate Marketing to develop and publish newsletters, social media, email blasts, mailers, and other customer publications, • Proactively assess, clarify, and validate customer needs on an ongoing basis., • Lead solution development efforts that best address customer needs, while coordinating the involvement of all necessary company personnel, • Provide sales and presentation skills training to staff, • Manage, train, and analyze data of the CRM system, • Aid in the development and support of National Account partners within assigned region Accountabilities and Performance Measures • Meet/exceeds assigned activity expectations, implementing goal planning on an annual, quarterly, and monthly basis, • Uses CRM and the company-implemented measures to plan and track activity, • Achieves strategic customer objectives defined by the company, • Completes strategic customer account plans that meet company standards, • Maintains high customer satisfaction ratings that meet company standards, • Completes required training and development objectives within the assigned time frame Organizational Alignment • Reports to Region Manager, • Closely coordinates with National Accounts Program Manager to strategize client targeting priority and account maintenance, • Works closely with Branch personnel to determine appropriate outreach efforts and methods Qualifications • A four-year college degree from an accredited institution, preferred but not required, • Minimum of two years of business development experience, • Candidate has existing architectural, engineering, and consulting relationships within the market, • Current commercial real estate, healthcare, and educational contacts are highly preferred, • Valid driver's license and access to a personal vehicle (monthly vehicle allowance provided), • Strong public speaking abilities, • Demonstrated experience in strategic sales in a business-to-business sales environment, • PC proficiency, • CRM experience Environmental Job Requirements and Working Conditions • This position requires 25% travel Compensation for this role is determined using a variety of factors, including experience, skills, internal equity, market benchmarks, and the cost of labor in the different geographic locations where we operate. In addition to base pay, this position may also be eligible for: • Beneficial ownership in the Company through Western's Employee Stock Ownership Plan (ESOP)., • Participation in the Company's annual performance-based bonus program., • A comprehensive benefits package, which includes health, dental, and vision coverage, a 401(k) plan with company match, paid time off, maternity leave, and additional benefits designed to support employees and their families.US Pay Range$136,000—$200,000 USD Western Specialty Contractors does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity, or any other reason prohibited by law in the provision of employment opportunities and benefits. To view Western Specialty Contractors' SMS Terms of Service, click here. To view Western Specialty Contractors' SMS Privacy Statement, click here.

Job DescriptionCompany Description Entain Group and MGM Resorts International have created BetMGM — a brand built to make sports betting, gaming and entertainment unforgettable. Together, we're not just redefining the future, we're making it legendary. Sports betting, gaming and interactive entertainment is changing, and we're leading that change. By putting people first. By placing exciting, engaging and entertaining experiences at more fingertips than ever before. We're pulling into pole position by pushing boundaries further. With innovation. With technology. But most importantly, with people like you. Because when you join Entain, it's your game. So let's win together. Job Description Technical Lead – Frontend (Angular) Role Overview As a Tech Lead, you will lead the technical direction and delivery of frontend solutions built with Angular, leading teams through the full Software Development Lifecycle (SDLC). Reporting to the Engineering Manager, you will combine hands-on development, technical leadership, and people management to deliver high-quality, scalable products. You will help embed AI-assisted development practices into everyday engineering workflows. Using AI tools responsibly, you will accelerate delivery, improve code quality, and enhance decision-making across design, implementation, testing, and documentation. Are you ready to help shape the future of digital entertainment while collaborating with one of the world's largest online gaming and entertainment groups? What You Will Do Technical Leadership & Delivery • Design, deploy moderately to complex frontend features using Angular and modern web technologies., • Manage delivery across design, implementation, testing, release, and production support., • Lead technical design discussions, RFCs, and architectural decision-making., • Debug and resolve issues across development, test, and production environments, being the primary on-call escalation point., • Ensure solutions are secure, scalable, performant, and aligned with platform and architectural standards. AI-Driven Engineering Practices • Use AI-assisted development tools (e.g., code generation, refactoring, test creation, documentation, and debugging prompts) to promote collaboration and quality., • Define and promote best practices for prompt engineering, validation of AI-generated outputs, and safe usage of AI., • Use AI to support code reviews, technical analysis, performance optimization, and incident investigation—while ensuring human accountability and quality control., • Explore and champion opportunities to integrate AI into frontend workflows, automation, and developer experience projects. Quality and best practices • Enforce clean, maintainable, reusable, and well-tested code aligned with engineering standards., • Promote secure coding practices, vulnerability management, and performance optimization., • Champion CI/CD best practices, automation, and continuous improvement across the team., • Ensure observability through logging and monitoring. Team Leadership & Collaboration • Set and communicate clear technical and delivery goals aligned with business strategy., • Manage story lifecycles, dependencies, and priorities in collaboration with Product, QA, and other Tech Leads., • Develop engineers, encouraging a learning-focused team culture., • Lead team ceremonies, technical workshops, and knowledge-sharing sessions., • Contribute to hiring, onboarding, and technical assessment of new team members.Qualifications Core Technical Skills • 10+ years of experience., • Hands-on experience with Angular and modern frontend development practices., • Proficiency in distributed systems, object-oriented design, and data structures., • Experience with SDLC, API integration, and relational databases (SQL)., • Experience with clean code principles, version control, and application monitoring., • Knowledge of software testing strategies, test automation, and CI/CD pipelines., • Familiarity with performance optimization, Docker/Kubernetes, and cloud-native environments., • Experience working with microservices and event-driven architectures., • Grasp of Agile methodologies and iterative delivery. Backend & Cross-Stack Knowledge • Experience with Java and modern backend frameworks., • Understanding of secure coding practices, authentication/authorization, and vulnerability management. AI & Modern Engineering • Experience using AI-assisted coding tools in professional software development., • Evaluate, validate, and safely integrate AI-generated code and recommendations., • Interest in prompt engineering, automation, and AI-driven developer productivity. Soft Skills • Experience communicating updates and resolutions to customers and other partners., • Someone who balances hands-on delivery. Additional Information At Entain, we know that signing top players requires a great starting package, and plenty of support to inspire your best. Join us, and a great compensation package is just the beginning. Working for us in US, you can expect to receive benefits like: • Salary Range: $173,100 - $207,700, • Healthcare support, • A stake in our success through our ShareSave scheme, • Great development opportunities, • Wellbeing support, and so much more. And outside of this, you'll have the chance to turn recognition from leaders and colleagues into amazing prizes. You'll also join a winning team of talented people and be a part of an inclusive and supporting community where everyone is celebrated for being themselves. Should you need any adjustments or accommodations to the recruitment process, at either application or interview, please contact us. You have valid authorization to work for our company in the U.S. without the need for immigration sponsorship. This role is not eligible for immigration-related employment authorization sponsorship including H-1B, O-1, E-3, TN, OPT. #LI-hybrid

Job Description Job Title: Product Manager B2B Security Location: Remote Job Description: Hanwha Vision America (HVA), a subsidiary of the Hanwha Group, is a global leader in video surveillance and physical security solutions. We deliver cutting-edge IP cameras, cloud platforms, access control solutions, and video management systems (VMS), trusted across industries including retail, transportation, education, banking, healthcare, and critical infrastructure. As we expand our footprint in the access control space, we are looking for a high-impact Product Manager to join the team building next generation of access control solutions — built at the intersection of hardware, cloud, and AI. This is not a maintenance role — this is a build-and-scale opportunity. You will help to own the product strategy and execution for our access control solutions portfolio, working at the intersection of hardware, cloud software, and AI. You will partner with engineering, sales, and leadership to define what we build, why we build it, and how we win in a highly competitive market. If you are a self-starter with deep access control domain expertise, a sharp eye for detail, and a passion for shaping the future of physical security, we want to talk to you. Key Responsibilities: Product Strategy & Roadmap: Own and drive the product roadmap for access control solutions, aligned with company strategy and market opportunities. Define and communicate a clear internal and external roadmap with prioritization rationale. Customer & Market Discovery: Lead voice-of-customer sessions, field discovery interviews, and on-site visits to deeply understand user needs and pain points across security integrators, IT teams, facility managers, and enterprise end users. Requirements & Specifications: Translate customer needs, field feedback, and market insights into clear product requirements, user stories, and functional specifications. Define standards for security, uptime/SLA, UI/UX accessibility, and integration quality. Competitive Intelligence: Lead competitive analysis and define positioning to differentiate HVA's access control portfolio in the market. Conduct ongoing benchmarking against leading cloud and on-premises solutions. Feature Prioritization: Develop data-driven prioritization frameworks to balance customer value, business impact, and technical feasibility. Manage the backlog and drive Agile delivery in collaboration with engineering teams globally. Cross-Functional Execution: Work cross-functionally with engineering, sales, marketing, and support to deliver high-quality products on time. Liaise with global development teams, accommodating cross-timezone collaboration as needed. Go-to-Market & Launch Support: Partner with go-to-market teams to support product launches, sales enablement, field readiness, and customer success. Develop comprehensive product documentation, training materials, and marketing collateral for each release. Commercial & Ecosystem Strategy: Develop a strong understanding of pricing strategy, packaging, ecosystem dynamics, and profitability levers. Identify and evaluate new product opportunities in cooperation with sales to increase competitiveness and revenue. Partner & Supplier Engagement: Work with OEM partners, hardware suppliers, and third-party vendors to support product definition, integration requirements, and lifecycle planning. Represent HVA's access control portfolio at tradeshows, sales meetings, and industry events. Product Lifecycle Management: Manage the complete access control product lifecycle from concept through end-of-life, including migration strategies for customers transitioning from legacy on-premises systems to cloud-based solutions. Qualifications: • 5+ years of experience in product management within access control, physical security technology, or related B2B SaaS/hardware domains, • Deep understanding of access control systems — hardware (readers, controllers, credentials) and software (cloud, on-premises, hybrid architectures), • Demonstrated ability to take products from concept to launch and drive measurable business impact, • Proven experience building customer-facing products and conducting voice-of-customer research at scale, • Experience working with partners, OEMs, channel integrators, and external vendors in a reseller/dealer model, • Familiarity with cloud-based architectures, modern SaaS models, and API/integration ecosystems, • Strong analytical mindset with ability to make data-driven decisions and develop prioritization frameworks, • Proficiency with product management tools (e.g., Jira and Confluence) and design collaboration tools (e.g., Figma), • Excellent written, verbal, and executive-level communication skills, • Ability to operate in a fast-paced, cross-functional environment with competing priorities, • Bachelor's degree in Computer Science, Engineering, Electronics, or a related field (or equivalent experience), • Willingness to travel up to 30% for customer sites, partner meetings, and industry tradeshows (e.g., ISC West) Preferred Qualifications • Experience integrating AI/ML capabilities into physical security or IoT products, • Familiarity with video surveillance platforms, VMS, visitor management, or smart building ecosystems, • Demonstrated track record of driving UI/UX differentiation in hardware-enabled software products, • Knowledge of cybersecurity best practices, data privacy standards, and product compliance (e.g., SOC 2, ISO, UL, GDPR), • Experience managing on-premises-to-cloud product migration strategies for installed base customers, • Prior experience in a global product role requiring cross-timezone collaboration with distributed engineering teams, • Background in enterprise verticals including retail, healthcare, education, transportation, or critical infrastructure, • Familiarity with mobile credential technologies and mobile-first access control design Hanwha Vision America provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Description Job Title: Product Manager - Health Technology Location : Hybrid Compensation : 50-60$/Hr on C2C/1099 Work Authorization: GC, USC Role Overview We are looking for a Senior Product Manager with proven experience in healthcare technology to lead strategy, roadmap, and delivery of high-impact digital health products. This role requires strong business acumen, healthcare domain expertise, and the ability to drive cross-functional execution in a fast-paced, regulatory-driven environment. Key Responsibilities · Own product vision and roadmap, ensuring alignment with healthcare client goals and regulatory requirements (HIPAA, CMS, HITECH). · Translate business needs into clear product requirements, user stories, and success metrics. · Partner with engineering, design, data, and compliance teams to deliver scalable, patient-centric solutions. · Drive end-to-end product lifecycle: concept → launch → adoption → optimization. · Conduct market/competitive analysis to identify opportunities in payer, provider, and digital health ecosystems. · Present product strategy and outcomes to executives, stakeholders, and clients. Qualifications · 7–10 years of Product Management experience, with at least 3–5 in healthcare. · Deep understanding of EHR/EMR, interoperability (HL7, FHIR), claims, and healthcare data standards. · Strong background in Agile/Scrum and product analytics (KPIs, adoption metrics, ROI). · Excellent stakeholder management and communication skills with executive presence. · Bachelor’s in Business, Healthcare Informatics, or related field (MBA preferred). Preferred Skills · Experience with payer/provider systems, population health, or digital care platforms. · Familiarity with AI/ML, analytics, or digital engagement in healthcare. · Track record of leading product teams and mentoring junior PMs. Why Join · Competitive pay + performance bonus. · Comprehensive healthcare & retirement benefits. · Work on solutions that directly improve patient outcomes and healthcare efficiency. · High-visibility role with growth opportunities.

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We have an immediate opening for a Project Manager in our Jersey City, NJ office location. As a Project Manager you will be responsible for providing project support and conducting on-site inspections to ensure compliance with project plans, specifications, and industry standards. Your primary focus will be on delivering exceptional project outcomes while maintaining effective communication with internal teams, clients, and contractors. DUTIES & RESPONSIBILITES: Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Records accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Demonstrates an understanding of Construction Plans, Specifications, and construction manuals., • Produces inspection field reports for clients, by thoroughly reviewing site observations, reporting findings and providing recommendations based upon professional judgement, while applying relevant codes and standards., • Review and evaluate change orders, assessing their impact on the project scope, schedule and budget, and providing recommendations to the team lead/ senior management., • Review payment applications, verifying the accuracy of work completed and materials supplied by contractors.Client Relations, • Participates in client meetings led by senior personnel, where active involvement is limited to taking meeting minutes, effectively communicating the meeting's agenda, and diligently following up with all stakeholders to ensure timely addressing of action items., • While working with senior staff, assist in planning, organizing, and running project meetings, effectively communication project objectives, deliverables, and action items to all stakeholders.Internal Team, • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timelines to ensure project success. Please be aware that this job description does not encompass an exhaustive list of activities, duties, or responsibilities expected of the employee. The nature of the role may necessitate additional responsibilities, and/or activities, which can occur at any time, with or without prior notice. Supervisory Responsibilities: This position has no supervisory responsibilities. Qualifications: Education • Bachelor’s degree from a four-year college or university in Engineering, Architecture, Construction Management, or relevant work experience.Work Experience, • A minimum of two years of experience in an architectural and engineering consulting firm or construction industry.Licenses and Certifications, • For degree holders: Engineering/Architectural Intern or Engineering in Training Certification preferred., • OSHA-10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Skills, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets.Estimated salary range for this position is $55,000 to $100,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs.Height and Access Equipment, • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights.Outdoor Environment, • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind.Mobility, • Extended periods of standing and walking, possibly on uneven or challenging terrains.Flexibility in Scheduling, • Ability to adjust lunch hours based on project-specific demands, which might include working through regular lunch times. EMPLOYEE BENEFITS We offer competitive salaries, professional work environments and a comprehensive benefits package. Benefits include: • Medical, Dental and Vision coverage, where we pay a portion of the premiums., • Supplement Insurance Options- Life, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans., • Fully Company funded Short-Term & Long-Term Disability benefits., • 401K- A retirement program where we provide a match up to 3%., • We offer Paid Holidays, Paid sick time and Vacation days., • Employee Referral Program., • Employee Recognition Program., • Continuing Education Reimbursement., • Professional Licensing Assistance., • Jury Duty Leave., • Maternity/Paternity Leave., • Mobile Phone Reimbursement/ discounts., • Employee Assistance Program., • Workers Compensation. Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR Gb1fSvJlDE

Job Description About Us: We are a leading surveying and geospatial solutions provider dedicated to delivering accurate and reliable data to support various industries such as construction, land development, and infrastructure projects. We are committed to excellence in surveying services and are seeking an experienced and results-driven Survey Project Manager to lead and oversee survey projects from initiation to completion. Position Overview: As a Survey Project Manager based out of our Rutherford, NJ office, you will be responsible for planning, coordinating, and executing survey projects to meet client requirements and deliver high-quality results. The ideal candidate will have a strong background in land surveying, excellent project management skills, and the ability to lead a dynamic team in a fast-paced environment. Key Responsibilities: • Manage and oversee survey projects from initiation to completion, ensuring adherence to timelines and budget constraints., • Collaborate with clients to understand project requirements and expectations., • Develop project plans, schedules, and budgets, and communicate these to the surveying team., • Lead and coordinate survey teams, including Survey Party Chiefs, CAD Technicians, and Technicians, to achieve project goals., • Monitor and ensure the quality and accuracy of survey data collected in the field., • Review and approve survey deliverables, including plats, maps, and drawings., • Maintain regular communication with clients to provide project updates and address any concerns., • Collaborate with other departments, such as engineering and construction, to ensure seamless project integration., • Provide leadership, mentorship, and training to surveying team members. Qualifications: • Bachelor's degree in surveying, civil engineering, or a related field; professional surveying license (PLS) is a plus., • Minimum of 10 years of experience in land surveying, • Strong understanding of surveying principles, methodologies, and techniques., • Excellent leadership and communication skills, with the ability to collaborate with cross-functional teams., • Proven ability to manage multiple projects simultaneously., • Familiarity with relevant industry standards and regulations., • Problem-solving skills and the ability to make informed decisions under pressure., • Strong client relationship management skills. If you are a dedicated and experienced Survey Project Manager looking for a challenging opportunity with a growing company, we invite you to apply. Please submit your resume outlining your relevant experience and qualifications to Zach Redenbaugh at zredenbaugh@spotlock.io

Job Description At Vomela our greatest asset is our people. As a full-service visual communications company, we are looking for creative and intellectual thinkers that work with our customers to create compelling brand solutions and foster meaningful connections. And while you're focused on creating big things for global and local brands, we will help you build a career you can be passionate about. Apply now to find your place at Vomela. Hourly Pay Range: $33 - $38 USD Job Summary The Project Manager will be responsible for estimating, prototyping and production of all assigned projects. What You’ll Do… • Managing raw material cost, • Identifying inefficiencies, • On Time Deliveries, • Accurate Bills of Materials, • Managing inventory levels, • Schedules projects into production planning, checks production schedules, verifies progress of jobs, and informs supervisor of any variance from production schedule., • Oversees the maintenance of estimate, work order and outstanding orders files., • Arranges production release meetings and interval meetings as necessary., • Procures outside production/buyouts and raw materials for assigned projects in a timely manner in order to meet due dates. Develops productive relationships with and directly supervises vendors, contractors and subcontractors. Maintains standard cost and buy quantities of raw materials. Arranges alternate supplier sources and monitors vendor performance., • Compiles list of materials needed for assigned projects and contacts vendors or Purchasing Department to requisition materials., • Prepares instruction sheets for all systems including a parts list., • Analyzes project requirements and establishes format for cost estimates and GPM%. Provides pre-production cost budgets. Reviews manufacturing work orders and quality control sheets to make sure they are consistent with estimates., • Works from drawings, samples and/or written specifications to determine a job cost estimate for specific client assignments. Offers options for materials and run sizes for greatest economic advantage., • Responds to requests from sales personnel concerning schedule status and changes. Interfaces with Design and Customer Service personnel to assess work in progress and on-time shipments., • Coordinates manufacturing activities, inspects and quality controls products; accepting or rejecting products according to customer specifications and/or company standards., • Approves the first pack-out and spot checks pack-outs thereafter., • May determine shipping priorities from production schedule and inform finishing and shipping departments when necessary., • Keeps computerized inventory of all raw stock for assigned projects. Maintains product min/max levels as defined by sales., • Coordinates billing with project coordinator and accounting department., • Attends company-wide work activity/production meetings., • Actively participates in industry functions, and keep abreast of new technology and industry developments (computer programs, equipment, industry trade shows, journals and publications)., • Additional or different functions may be assigned as required. Requirements What You’ll Bring… • BA or BS degree in Business, Manufacturing, Engineering, Graphic Arts or related field; or, • Three to five years screen printing and/or digital imaging project management experience and/or training; or, • Equivalent combination of education and experience., • Strong skills in work planning, scheduling., • Must have good judgment of color, design, and print quality., • Ability to write reports, business correspondence, and procedure manuals., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to effectively present information and respond to questions from managers, clients, vendors, and employees., • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations to assigned projects., • Ability to compute rate, ratio, and percent and draw and interpret bar graphs., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to break out product costs into their material, labor and overhead components., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation & Public Holidays), • Short Term & Long Term Disability, • Training & Development, • Wellness Resources

Job DescriptionPosition Description: Summary/Objective:Reporting to a member of the project management team, the incumbent will be responsible for the production Architectural Drawings/Models in AutoCAD and/or Revit for Nationwide Banks, Restaurants, Retailers and, large property management and construction companies throughout North America.The successful candidate will operate in a fast-paced team environment, working in collaboration with various staff members to meet scheduled deliverables.Essential Functions: Create drawings for industry specific projects based on preliminary sketches, concepts, and data Utilize AutoCAD/ REVIT and other programs to develop lay out and diagrams with attention to specification details Assist with technical handbooks and guidelines. Assist with research on landlord code compliances and permitting. Assist in the development of floor plans. Assist with the completion of drawings red-lined by Studio Director, Project Manager or Assistant Project Manager Ability to complete a full set of drawings with minimal errors or supervision. Assist with coordination and follow up between consultants. Occasionally carry out site surveys with project team on a needed basis Follow instructions of managers accurately with efficiency Maintain complete, readily accessible hardcopies and electronic files and records of survey reports, design direction, schedules, and any other pertinent information to the project.Qualifications: AA/BS or equivalent in Architecture, particularly work experience in Minimum 2-3 years of experience as a Draftsperson preferably within the retail, restaurant, or hospitality space. Ability to interpret construction data, engineering calculations and specifications. Proficiency in AutoCAD/Revit required, with basic knowledge of, SketchUp, Photoshop and Illustrator preferred. Experience drafting construction documents preferred. Must be comfortable in a support role and possess the ability to work with minimal supervision. Must be able to multitask and produce accurate work. Must possess strong time management skills and the ability to handle the pressure of tight deadlines. Demonstrated time management, communications and organizational skills $24.00 - $26.00 Hourly

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description For those who’d rather be on the move than behind a desk. We’re opening our 2026 hiring pipeline now for curious, adaptable problem-solvers who love travel, hands-on work, and being part of a team that actually knows your name. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit. We believe in transparency. Our four-week paid training is designed to prepare technically skilled individuals for the field. Success in training requires a basic foundation in electrical systems, programming, and communication networking. If you’re new to these areas, this role may not yet be the right fit. Why You’ll Love Working With Us Work + Travel, Combined. You’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. There is no office to report to, and you’ll be away from home while you’re working. Fair Pay That Grows With You. Starting salary $60,000–$75,000, depending on location, education, and experience. You’ll also receive per diem for meals, mileage reimbursement, utilization bonuses, weekend bonuses and more. We don’t have endless budgets, but we do have trust, teamwork, and appreciation of knowing every person by name. Room to Grow. We invest in your development through paid training, annual merit raises, and a 5% salary increase after six months. Learn, advance, and build a career that can take you in multiple directions. We will be your biggest cheerleaders of growth, even if you’re not with ProAutomated forever. Real Benefits + Real Flexibility. Health, dental, and life insurance, a matching 401(k), short & long term disability options, paid vacation, and flexible time off after 18 months. We take care of you, on and off the job. A Team That Gives You Community. We’re a smaller, people-first company where teamwork, adaptability, and humor are part of the job. All of our leaders have grown into their positions at ProAutomated, so your manager has done what they’re asking you to do. We hold each other to high standards, accept none of us are perfect, and push for excellence. You’ll be surrounded by people who have your back. What You’ll Do You’ll be part of the team that keeps automation projects moving. At ProAutomated, we don’t install systems, we partner with system integrators and manufacturers to ensure everything works flawlessly when it matters most. • Support data center startups, performing on-site mechanical, electrical, and control checks., • Lead startup, checkout, and acceptance testing for warehouse fulfillment and manufacturing systems in industries like food and beverage., • Partner with automation and controls engineers to test, troubleshoot, and validate their systems on-site., • Provide clear communication and updates to customers and project teams to keep progress smooth and accurate., • Typical travel rotations follow a days on & off schedule: 5 on - 2 off, 10 on – 4 off, or 14 on – 7 off. Every project brings new challenges and new locations., • Work with various customers, getting invaluable real world experience with massive companies, but with the ProAutomated team supporting you.What We’re Looking For, • A genuine love of travel, expect to be away from home on rotation (we’ll handle the logistics)., • Preferred experience: have a working knowledge of electrical systems, programming, and communication networking skills., • Adaptability and grit, you thrive when plans change and challenges pop up., • Strong communication and problem-solving skills., • Must live within 50 miles of a major airport (relocation assistance available)., • Personal vehicle within 45 days of employment (for local projects)., • Authorized to work in the U.S., • A technical degree or equivalent hands-on experience (3+ years) in a related field such as electrical, mechanical, or automation engineering. Physical Requirements The below physical requirements are considered essential functions of the role. • Ability to walk long distances across large facilities or job sites as part of daily work activities., • Climb ladders, stairs, or work at heights., • Lift, carry, and move up to 50 lbs., • Stand, kneel, or reach for extended periods, • Work in varied environments (construction sites, outdoor, hot/cold) Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions. Ready for a Career That Takes You Places? If you want a career that’s challenging, travel-filled, and far from ordinary, where your effort actually matters, we’d love to meet you. Apply now to get on our radar for early 2026 hiring. Principals only — recruiters, please do not contact. ProAutomated is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment where all team members feel respected and supported. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other protected status. Powered by JazzHR rPhrx6s2X6

Job DescriptionCareer Renew is recruiting for one of its clients a Product Manager - Fintech - this is a hybrid role in Jersey City. Salary range: 140-180K USD plus benefits. Our mission is to transform how money moves. We believe stablecoins will underpin a new financial fabric, one that is faster, more global, and more efficient than today's siloed systems. That is why we are building AUSD and the stack, a full-service platform that makes issuing, managing, and integrating stablecoins seamless, whether you're a developer, fintech, or institution. With AUSD, stablecoins become programmable, composable, and ubiquitous by default. We believe digital dollars should be a public good: trusted, accessible, and built for real-world utility. Our mission is to drive adoption through customizable, user-friendly on-ramps that make stable, dollar-based value available onchain. We're backed by world-class investors including Paradigm and Dragonfly, and we're growing a team to reimagine how value moves online. We're intentional about who we bring on. If you're passionate about stablecoins and want to help create more open, intuitive ways for people to engage with money, let's talk. ABOUT THE TEAM We bring the discipline of high-performance finance teams and the creativity of a fast-moving crypto-native startup. We're a small, mission-driven group of builders who move fast, sweat the details, and hold a high bar for excellence, in product, code, and culture. You'll be joining a tight-knit team that values clear thinking, extreme ownership, and high-velocity decision making. We operate in short feedback loops, support one another without ego, and are deeply motivated by the opportunity to build foundational infrastructure for the future of money. ABOUT THE ROLE We're hiring a PM to own a meaningful slice of our product surface and drive it forward independently. You'll set strategy, write the spec, ship it with engineering, then watch how customers actually use what you built and decide what to do next. Agora's customers are developers, fintechs, and institutions integrating AUSD and the platform into their stack. Your job is to understand what they're trying to do, find the gaps between what the product offers and what they need, and close them. That means talking to customers directly. It means going deep on technical detail when the answer lives in an API or a settlement flow. And it means partnering with BD on the strategic accounts where product feedback and revenue intersect. In a typical week you might set the roadmap for your area, run research calls with prospects and active customers, pull your own queries to find where customers drop off, define the metric that tells you whether what you shipped worked, partner with BD on a strategic account, or write a spec and ship it with engineering. QUALIFICATIONS 3+ years in product management in stablecoins, payments, or fintech. Serious UX craft. You can tell the difference between a flow that works and a flow that feels good. High autonomy. You go from "something feels off here" to a shipped fix without scaffolding, including writing the specs engineers build from and the updates that move decisions forward. Shipped work with measurable outcomes. You've instrumented a funnel, found a drop-off, and moved the number, and you can explain exactly what you did. Strong analytical instincts. You pull your own data, define your own metrics, and use them to prioritize. Comfort with technical and API-driven products. You can reason about API design, read a spec, and partner credibly with engineers on infrastructure decisions. AI fluency. You build with modern AI tools (prototypes, evals, internal automations) and have a sharp, opinionated view on where they help and where they don't.

Job Description Location: Hawthorne, NJ About the Role: We are seeking a Preconstruction Project Manager with experience in C&I distributed generation solar EPCs to support our expanding portfolio of commercial renewable energy projects. The Preconstruction Project Manager (Precon PM) is responsible for managing the full preconstruction lifecycle. This position requires strong technical understanding of solar PV systems, excellent communication skills, and the ability to coordinate cross-functionally with Engineering, Construction, Procurement, and Finance. The Precon PM reports to the Director of Preconstruction and must be located near Hawthorne, NJ with hybrid flexibility and travel to job sites as needed. Key Responsibilities: RFP Management & Technical Review • Review and interpret drawings, specifications, geotechnical reports, surveys, and contract documents., • Develop a comprehensive understanding of project scope, contract requirements, risks, and deliverables., • Lead the full preconstruction lifecycle: kickoff, Q&A, clarifications, addenda review, and submission coordination., • Perform detailed quantity takeoffs, material counts, and system component validations., • Conduct constructability reviews and participate in site walks. Estimating, Cost Modeling & Value Engineering • Collaborate with Estimating to validate scope, phasing, and manpower projections., • Develop complete and normalized bid comparisons (bid-leveling) and perform subcontractor/vender descopes., • Build and maintain cost databases, benchmarking tools, and historical cost libraries., • Collaborate closely with Engineering and Procurement to analyze multiple design options and provide value-engineering recommendations (racking, modules, inverters, electrical topology, structural considerations, etc.) based on codes, AHJ requirements, equipment availability, and constructability., • Prepare budget forecasts, variance analyses, and pricing summaries for leadership review. Subcontractor & Vendor Management • Manage the entire subcontractor RFP process, including distribution of bid packages, NDAs, clarifications, evaluations, and award recommendations., • Prequalify subcontractors and maintain updated capability, cost, and performance records., • Coordinate with racking vendors and geotechnical/pull-testing providers to obtain required data prior to bid., • Negotiate scope, terms, pricing, and risk allocations; assist in drafting, revising, and executing subcontract agreements. Utility, AHJ, and Permitting Coordination • Coordinate with utilities to evaluate interconnection requirements, timeline, fees, and scope impacts., • Research permitting requirements, zoning constraints, and local code amendments for each jurisdiction., • Engage with AHJs to understand inspection sequences, fire code constraints, and design requirements affecting project cost., • Integrate interconnection, permitting, and code requirements into estimates and risk assessments. Project Planning, Scheduling & Risk Management • Develop preliminary construction schedules in partnership with Engineering, Construction, and Project Management., • Identify permitting, interconnection, structural, geotechnical, supply-chain, and schedule-driven risks., • Create bid-level risk logs and mitigation plans., • Prepare early project budgets and establish financial control frameworks., • Review and track preconstruction-phase cost commitments; support change order generation as needed. Internal Collaboration & Handoff • Set up preconstruction documentation in Procore, including bid packages, submittal logs, and scope definitions., • Lead internal page-turn and handoff meetings to ensure smooth transition from estimating to execution teams., • Provide Construction and Project Management teams with complete estimating backup, assumptions, vendor quotes, schedules, and risk summaries. Process Improvement & Continuous Learning • Lead lessons-learned sessions post-project and drive implementation of recommendations., • Review actual cost data from completed projects to refine estimating accuracy., • Track subcontractor field performance feedback and incorporate into future bid strategies., • Identify process inefficiencies and propose creative, practical solutions to improve organizational performance., • Facilitate periodic internal training with subject matter experts. Education & Experience Requirements: • 3+ years of preconstruction, estimating, or project management experience at a Solar EPC (C&I DG preferred)., • Experience with subcontractor tendering, bid-leveling, and contract negotiation is required., • Experience developing or reviewing solar PV designs (electrical, structural, civil) is strongly preferred., • Bachelor’s degree in Construction Management, Engineering, or related field preferred., • Experience with self-perform estimating is a plus. Required Skills & Competencies: • Strong proficiency in Microsoft Excel (advanced functions), MS Office, and MS OneNote preferred., • Experience with Procore, Bluebeam, Smartsheet required., • Ability to prioritize and manage multiple concurrent deadlines., • Strong organizational, data-entry, and project management skills., • Clear written and verbal communication with strong technical documentation skills., • Exceptional note-taking, retention, and follow-through abilities., • Analytical mindset with strong mathematical and problem-solving skills., • Understanding of NEC solar PV requirements (Articles 690, 705, etc.) preferred., • Ability to perform basic structural and electrical design reviews., • Natural curiosity, ownership mentality, and a drive for continuous improvement., • Valid driver’s license required. Compensation & Benefits: • Competitive Salary, • Performance-Based Bonuses, • Employee Referral Bonuses, • Matching 401(k), • Health, Dental, and Vision Insurance, • Health Reimbursement Account, • Life, AD&D, Accident, Disability, and Critical Illness Insurance, • Employee Discount Program, • Paid Time Off and Paid Holidays Applicants must be authorized to work in the United States without the need for current or future employment sponsorship. Note to Agencies: We are not accepting solicitations from recruiters or staffing agencies for this position. All candidates must apply directly. Unsolicited outreach or submissions will not be considered. Company DescriptionPfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\n\r\n\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job Description For decades, Dempsey Uniform & Linen Supply has been committed to delivering exceptional uniform, linen, and facility service solutions to healthcare, hospitality, industrial, and commercial customers throughout the Mid-Atlantic region. Our success is built on a culture of service, reliability, operational excellence, and a commitment to the safety and well-being of our employees. As we continue to grow, we are seeking a highly motivated and experienced Corporate EHS Manager to lead and strengthen our environmental, health, safety, and compliance programs across all company locations. Position Summary The Corporate EHS Manager is responsible for developing, implementing, and sustaining a comprehensive Environmental, Health & Safety program across all Dempsey facilities. This role provides strategic leadership and hands-on oversight of EHS compliance and safety culture for industrial laundry operations, maintenance functions, warehouses, distribution centers, and commercial vehicle fleets. The Corporate EHS Manager will partner closely with plant leadership, engineering, maintenance, transportation, and operations teams to create a proactive safety culture that protects employees, ensures regulatory compliance, supports operational excellence, and advances Dempsey’s commitment to quality and customer service. Key ResponsibilitiesCorporate EHS Leadership & Compliance • Develop, implement, and continuously improve a standardized corporate EHS management system across all Dempsey facilities., • Serve as the primary company representative for OSHA, EPA, DOT, local environmental agencies, and regulatory inspections., • Conduct facility audits, compliance inspections, hazard assessments, and risk evaluations while ensuring timely corrective action completion., • Establish and monitor leading and lagging safety indicators, providing monthly executive-level reporting and recommendations., • Manage environmental permitting, regulatory reporting, hazardous waste management, wastewater compliance, and environmental stewardship initiatives., • Develop, maintain, and test company-wide Disaster Recovery Plans (DRP), emergency response procedures, crisis communications, and business continuity protocols.Healthcare Laundry & Accreditation Compliance, • Lead and support compliance initiatives associated with Healthcare Laundry Accreditation Council (HLAC) standards and Hygienically Clean certification requirements., • Partner with Operations and Quality teams to ensure facilities maintain accreditation standards related to employee safety, infection prevention, quality assurance, and operational controls., • Support audit readiness and corrective action implementation associated with accreditation reviews.Production & Laundry Operations Safety, • Partner with plant leadership to identify and mitigate risks associated with industrial laundry processing, automated material handling systems, conveyors, finishing equipment, tunnel washers, dryers, boilers, and chemical dispensing systems., • Develop and maintain Job Hazard Analyses (JHAs), Safe Work Procedures (SWPs), and risk assessments for production operations., • Oversee Lockout/Tagout (LOTO), machine guarding, ergonomics, chemical handling, and noise exposure programs., • Lead Management of Change (MOC) reviews and Pre-Startup Safety Reviews (PSSR) for new equipment, facility expansions, and process modifications., • Drive employee engagement through near-miss reporting, behavioral-based safety programs, and continuous improvement initiatives.Maintenance & Engineering Safety, • Ensure compliance with OSHA standards governing electrical safety, confined space entry, fall protection, hot work, machine safeguarding, and contractor management., • Administer Bloodborne Pathogen (BBP) training and exposure control plans where applicable., • Review contractor safety plans and oversee contractor onboarding and compliance activities., • Collaborate with Engineering and Maintenance teams to integrate safety requirements into preventive and predictive maintenance programs., • Oversee life-safety inspections and compliance programs for fire suppression systems, emergency eyewash stations, emergency lighting, boilers, pressure vessels, and related infrastructure.Fleet Safety & Transportation Compliance, • Develop and manage a comprehensive fleet safety program covering route service representatives, delivery drivers, transportation personnel, and company-owned vehicles., • Administer driver qualification programs, MVR review processes, defensive driving training, and driver coaching initiatives., • Ensure compliance with applicable FMCSA and DOT regulations including:, • Driver Qualification Files, • Drug & Alcohol Testing Programs, • Electronic Logging Device (ELD) Requirements, • Driver Vehicle Inspection Reports (DVIRs), • Hours of Service Compliance, • Investigate vehicle accidents and near-misses while utilizing telematics and camera systems to identify coaching opportunities and reduce risk.Training & Safety Culture, • Design, implement, and maintain company-wide EHS training programs., • Lead OSHA compliance training initiatives including:, • OSHA 10/30, • Hazard Communication (GHS), • Lockout/Tagout, • Forklift Safety, • Confined Space Entry, • Fall Protection, • First Aid/CPR/AED, • Emergency Response Procedures, • Develop onboarding safety orientation programs for all new employees., • Lead safety committees and mentor site-level safety champions throughout the organization., • Promote a culture where safety is recognized as a core value and business priority.Incident Management & Regulatory Reporting, • Manage company-wide incident reporting, investigation, and recordkeeping systems., • Maintain OSHA 300 and 300A logs and ensure compliance with all reporting requirements., • Conduct root cause investigations utilizing methodologies such as 5-Why Analysis, SCAT, and Fault Tree Analysis., • Partner with Human Resources to manage workers’ compensation claims, return-to-work programs, and injury prevention initiatives., • Prepare and submit OSHA, EPA, DOT, Tier II, wastewater, and state regulatory reports accurately and on time.QualificationsEducation & Certifications Required • Bachelor’s degree in Occupational Safety, Environmental Science, Engineering, Industrial Hygiene, or a related field., • OSHA 30-Hour General Industry certification. Preferred • Certified Safety Professional (CSP), • Associate Safety Professional (ASP), • Certified Industrial Hygienist (CIH), • OSHA 510 or OSHA 511 certification, • DOT/FMCSA compliance certification, • First Aid/CPR Instructor certificationExperience, • 7-10 years of progressive EHS leadership experience in manufacturing, industrial laundry, textiles, distribution, logistics, or multi-site operations., • Experience managing fleet safety programs and DOT compliance., • Demonstrated success improving safety performance and reducing incident rates., • Experience leading OSHA, EPA, and DOT inspections and audits., • Prior experience supporting healthcare laundry accreditation standards is highly desirable.Knowledge, Skills & AbilitiesTravel: Up to 40% (multi-site travel required) Location: Corporate oversight of all Dempsey Uniform & Linen Supply facilities • Strong working knowledge of OSHA, EPA, FMCSA, DOT, and state regulatory requirements., • Understanding of industrial laundry operations, chemical handling systems, steam generation equipment, and production safety programs preferred., • Excellent analytical, organizational, communication, and leadership skills., • Ability to influence and engage employees at all levels of the organization., • Experience using EHS management software and Microsoft Office applications., • Valid driver’s license with an acceptable driving record.Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionSr. Manager Quality Assurance Validation Computerization Systems The incumbent will be responsible for supporting the Computerized System project teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. Will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contributes expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develops and evaluates quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • Bachelor’s Degree in a Scientific or Engineering discipline, • 8 + years of computerized system experience with IT compliance/validation/qualification activities., • 8 + years of experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • 10% travel required., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Sourgum is transforming the $100B+ waste and recycling industry through cutting-edge technology that makes waste removal simpler, smarter, and more cost-effective. Our innovative haulsourcing platform powers high-quality waste and recycling services for businesses at significantly lower costs—saving our customers an average of 20%. Leveraging proprietary datasets, an advanced operating system, and a carefully curated network of 5,000+ trusted vendors, we help companies of all shapes and sizes streamline their operations while advancing sustainability efforts. We’re a fast-growing, venture-backed company (just closed our Series A!) on a mission to modernize an outdated industry — and we’re just getting started. Our investors include Spark Capital, Founder Collective, Suffolk Technologies, 186 Ventures, and River Park Ventures, the same funds that backed category-defining companies like Slack, Anthropic, Uber, Venmo, and Amazon Pharmacy. If you’re driven by the opportunity to build something groundbreaking, we’d love to meet you. The Team: The Product team sits at the intersection of Engineering, Design, Sales, Operations, and Customer Success, shaping the experiences that power both sides of our business: a SaaS platform and a services-based offering. We partner closely with leadership and cross-functional teams to translate business strategy into product vision, and customer needs into scalable solutions. Our goal is to build products and services that deliver measurable value, drive growth, and create exceptional customer experiences. The Role: As the Head of Product, you will own the strategy and execution of our entire product organization across both the SaaS and services sides of the business. This is a true player–coach role: you’ll lead and develop a small product team (currently two direct reports) while also serving as the Product Manager/Product Owner for our SaaS platform. You’ll be responsible for defining product vision, setting roadmap priorities, and ensuring tight alignment between product, engineering, and go-to-market teams—while staying deeply hands-on with discovery, delivery, and iteration for our core software product. You’ll act as a strategic partner to executive leadership, translating business objectives into product strategy and turning customer insights into shipped outcomes. What you’ll be doing: Own the end-to-end product strategy and roadmap across both the SaaS platform and services-based offerings Serve as the Product Manager/Product Owner for the SaaS business, leading discovery, writing requirements, grooming backlogs, and driving delivery with Engineering Lead, mentor, and develop a small product team while establishing scalable product processes and operating rhythms Define product vision, success metrics, and prioritization frameworks aligned to company goals Partner closely with Engineering, Design, Sales, Operations, and Customer Success to ensure alignment from ideation through launch Translate business needs and customer feedback into clear product requirements, user stories, and acceptance criteria Drive customer discovery through interviews, data analysis, and feedback loops to inform roadmap decisions Own release planning and go-to-market coordination in partnership with Sales and Customer Success Build and maintain product documentation, specs, and internal enablement materials Establish product KPIs and dashboards to measure adoption, engagement, and business impact Balance strategic leadership with hands-on execution—shipping product while building a high-performing product function Identify opportunities to improve operational efficiency and customer experience across both software and services Act as a trusted advisor to leadership by turning insights into actionable product recommendations The qualifications you need: 7+ years of experience in Product Management, with at least 2+ years leading or managing product teams, ideally in a SaaS environment Proven experience owning product strategy while also operating as an individual contributor Strong understanding of agile product development, including backlog management, sprint planning, and cross-functional delivery Experience building B2B software products from discovery through launch and iteration Ability to operate effectively in a player–coach capacity—comfortable zooming between strategy and execution Demonstrated success partnering closely with Engineering and business stakeholders to deliver outcomes Strong product instincts paired with data-driven decision-making Excellent communication and stakeholder management skills, with the ability to align diverse teams around a shared vision Comfort working in ambiguity and fast-moving, high-growth environments Bonus: experience working with or building products that support services-based or operational workflows Benefits Company stock options as part of your compensation package, giving you the opportunity to share in our company's success and build long-term financial growth. A positive and collaborative work environment with a focus on innovation and sustainability. Flexible/Unlimited PTO Comprehensive benefits package including health insurance (medical, dental, vision, LTD, Life Insurance, etc.), retirement plans (401K). Access to hundreds of gyms, studios, and wellness apps—all through one easy membership provided by your Wellhub. Yearly Personal Development Budget Opportunities for professional development and career advancement within a growing company. Compensation Range: $220K - $300K

Job DescriptionSenior Manager IT Quality Assurance Validation Computerization Systems Allendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Biotechnology, Pharmaceutical and Medical Devices IT & Human Resources disciplines in New Jersey. The Senior Manager IT Quality will be responsible for supporting the Computerized System Project Teams in the review and QA approval of system validation and infrastructure qualification documentation and protocols, in accordance with FDA regulations/guidelines, 21 CFR Part 11, EU Annex 11, GAMP5, ICH Q10 and latest industry practices. The incumbent will also be responsible for QA oversight of all GxP computerized system activities implementation projects for the company to ensure compliance with regulatory requirements. The scope includes working with multi-functional teams on system implementations, problem resolution, and process improvement projects. Assist in maintaining and, where applicable, improving the effectiveness of the computer system validation and data integrity program. Will participate in the execution of highly complex and specialized projects and must be innovative and practical in project validation problem-solving. • Provide QA oversight and assurance that all GxP computerized system implementation and validation activities are executed in accordance with internal procedures and standards and meet all regulatory requirements., • Contribute expertise and provides guidance in 21 CFR Part 11, GAMP5, and EU GMP Annex 11 requirements and data integrity principles and requirements as well as participates in assessments., • Develop and evaluate quality processes and system standards to ensure compliance with company standards and governmental regulatory requirements., • Work closely and collaboratively with various business partners including Information Technology and system owners to effectively and efficiently implement new computerized systems, system upgrades, or system modifications., • Review and QA approve various types of system validation and infrastructure qualification documentation, including but not limited to, Master Plans, User Requirements and Functional Requirements Specifications, Design Specifications, IQ, OQ, PQ, Traceability Matrix, Validation protocols and reports., • Coordinate implementation validation/qualification strategies and serve as the subject matter expert., • Present project status reports to management as well as project teams., • Review Change Control requests and assess impact to validation. Support the necessary computerized system validation activities for changes., • Perform gap analysis of validation documentation, systems and practices. Communicate identified gaps including recommending and implementing corrective actions and improvements., • Participate in supplier site Validation Assessments/Audits and assist to troubleshoot and improve systems and processes. Review corrective actions and implementation closure evidence of observations/recommendations identified in the report., • Support internal, client, and regulatory audits and inspections., • Generate or review/update computer system related policies, procedures, templates, forms, etc., • Maintain up-to-date knowledge and understanding of quality system requirements as they apply to computerized system in accordance with cGxP’s regulations, GAMP, industry standards, policies and procedures., • Performs other quality system related duties as necessary.REQUIREMENTS, • BA/BS Degree in a Scientific or Engineering discipline, • 8 + years experience computerized system experience with IT compliance/validation/qualification activities., • 8 + years experience working in an FDA-regulated, GxP-related environment., • Demonstrated experience and expertise in 21 CFR Part 11 to ensuring site compliance., • Comprehensive knowledge in Software Validation and Data Integrity Principles., • Demonstrated experience, results, and accomplishments in QMS and LIMS system implementations., • Working knowledge or expertise in Software validation practices and Software Development Life Cycle (SDLC) models., • Working knowledge or expertise in Validations of Databases, Custom Software, Configurable Software, Non-Configurable Software, Infrastructure Software, Off-the-shelf software and various computerized systems., • Working knowledge or expertise in Design Qualifications (DQ), Installation Qualifications (IQ), Operational Qualifications (OQ), and Performance Qualifications (PQ)., • Knowledge of Software Risk Management Principles and tools., • Knowledge and proven ability working with Risk Management methodologies and tools., • Comprehensive knowledge of GAMP5, 21 CFR Part 11, and EU Annex 11 as well as FDA 21 CFR Parts 210/211 (cGMP), ICH Q10, Eudralex Vol 4. Knowledge of PMDA regulations a plus., • Experience with application system validation and infrastructure qualification., • Experience with vendor audit for computer systems (IT infrastructure, validation etc.) a plus., • Experience with writing and approving Standard Operating Procedures and Quality Standards., • Proficient in Microsoft Office Suite (e.g., Word, Excel, Project, PowerPoint)., • Must have a participative management style, strong team development, coaching skills, and the ability to lead and motivate teams., • Excellent verbal and written communication skills with the ability to communicate internally and externally to clients and suppliers., • Solid organizational and time management skills, proven project management, presentation and facilitation skills., • Innovation and strategic compliance skills including looking internally and externally for best practices., • The ability to effectively build and maintain relationships with multiple departments in order to effectively solve problems., • The ability to organize, prioritize and deliver tasks & projects with a sense of urgency under minimal supervision with attention to detail. Must be able to execute a variable workload with multiple priorities., • The ability to enable and drive change while being focused on internal and external customers., • Demonstrated results oriented, quick learner, team player; proactive with demonstrated ability to respond to urgent needs and deliver expected results within expected deadlines., • Environment includes working with all levels of internal management and staff as well as with external clients, suppliers, and contractors. Work will be performed in both an office environment and a manufacturing facility, with exposure to varying degrees of ambient noise., • 10% travel required.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Tiger Analytics is looking for experienced Technical Program Manager to join our fast-growing advanced analytics consulting firm. Our employees bring deep expertise in Data Science, Machine Learning and AI. We are the trusted analytics partner for multiple Fortune 500 companies, enabling them to generate business value from data. Our business value and leadership has been recognized by various market research firms, including Forrester and Gartner. We are looking for top-notch talent as we continue to build the best global analytics consulting team in the world. Key Responsibilities • Manages the development and implementation of a company’s products and services to success, • Acts as Program manager - monitoring the program from initiation through delivery including planning and directing schedules. Gathers input from the project team and acts independently to develop a plan for projects of moderate to significant scope which may include novel products or services., • Uses established tools approaches/methodologies and templates to guide and document the plan and communicate it to the team. Gathers feedback from the team to revise and complete the plan as needed, • Lead multiple limited to moderate-scope projects simultaneously, or manage part of a larger program directly., • Programs may be moderate to complex in nature or one large program with cross-functional teams in numerous locations, • Lead development and delivery of key data and analytics projects within time and budget, • Drive solution design and build to ensure scalability, performance, and reuse, • Oversees the work of the project team (indirectly supervises) involving members from a wide range of disciplines including application engineering, • Ensure on time and on budget delivery which satisfies project requirements, while adhering to enterprise architecture standards., • Creates presentations based on multiple sources of data, brings out insights from the data, and recommends actions and plans for their execution. Requirements • Experience with modern data engineering principles, pipeline engineering, etc., • Proven track record of delivering enterprise-level ETL / Data-warehouse specific projects., • 10+ years of experience in managing technology programs as a program manager., • 5+ years experience in running either AWS/ GCP or Azure data projects., • Experience in Data Warehouse, Data Lake, and related technologies, • Lead technical discussions, driving clarity of complex issues/requirements to build robust solutions, • Strong communication skills to meet with delivery teams and business-facing teams, • Experience with Healthcare industry projects Benefits This position offers an excellent opportunity for significant career development in a fast-growing and challenging entrepreneurial environment with a high degree of individual responsibility.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Interface with existing key company stakeholders, to grow business including Automation Specialist, Hydraulic Specialist, Pneumatic Specialist, Field Service Technicians. Qualifications: • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas., • Must be a U.S. citizen or legally authorized to work in the United States We offer comprehensive medical and dental plans, vacation days, sick days and a diverse 401k selection with Company matching. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description Job Title: Senior Product Manager - Provider Operations Location : Hybrid Compensation : 50-60$/Hr on C2C/1099 Work Authorization: GC, USC Position Summary We are seeking an experienced Senior Product Manager to lead the strategy, development, and optimization of provider-facing digital products. This role is responsible for creating seamless, personalized, and impactful experiences for providers—ultimately improving health outcomes and strengthening relationships with providers, members, and communities. This position will oversee key product initiatives within our provider operations portfolio, ensuring solutions align with market needs, organizational goals, and evolving industry standards. Key Responsibilities · Lead end-to-end product lifecycle for provider-facing digital capabilities, from strategy and planning to execution and optimization. · Define and manage product roadmaps and priorities based on market research, customer needs, and business goals. · Partner cross-functionally with engineering, design, operations, and business teams to define requirements and ensure successful delivery of enhancements and new features. · Engage directly with providers, internal stakeholders, and external partners to gather insights and validate product concepts. · Develop business cases, define KPIs, and track product performance using data-driven decision-making and A/B testing. · Drive agile execution, including participation in backlog grooming, sprint planning, and scrum ceremonies. · Support release planning, business-level verification, and market testing of new product features. · Communicate product vision, benefits, and value propositions clearly to internal teams and executive leadership. · Foster a culture of continuous improvement by analyzing feedback and evolving the provider experience through personalization and journey orchestration. Required Qualifications · 7+ years of product management or project management experience within healthcare enterprise solutions. · Proven experience managing provider-facing digital products, with a track record of delivering successful launches and measurable outcomes. · Strong understanding of provider operations, especially within payer environments; familiarity with provider portals such as Availity is a plus. · Ability to define and track KPIs and OKRs, and translate insights into strategic actions. · Skilled in developing user journeys, product requirements, and feature specifications. · Demonstrated ability to influence stakeholders and present to senior leadership with executive presence. · Deep understanding of agile development methodologies and participation in cross-functional scrum teams. · Exceptional communication, collaboration, and stakeholder management skills. Education · Bachelor’s degree in Computer Science, Nursing, Healthcare Administration, or a related field required. · Master’s degree preferred. Preferred Experience · Experience in care management and digital health solutions. · Experience designing personalized experiences and conducting A/B testing for optimization. · Familiarity with journey mapping and orchestration tools.