Data engineering manager jobs in Yonkers, New YorkCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Join an Award Winning Design/Build Firm with Career Growth Potential and Work/Life Balance! This Jobot Job is hosted by: Kristin Ursua Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $100,000 - $130,000 per year A bit about us: Come join our family! We are a Design/Build firm, specializing in architecture, engineering and commercial construction. Our loyal clients include auto dealerships, non-profit organizations, healthcare, recreation, manufacturing, distribution and industrial. We pride ourselves on our strong client relationships, giving them a building experience that is of the same quality of the building itself. Why join us? Work/Life Balance Amazing Company Culture Full Benefits, Employee Paid 401K Match PTO and Paid Holiday Schedule Career Growth Opportunity Job Details We are looking for a Construction Superintendent who will be responsible for the daily on site planning and scheduling, resource allocation, project accounting, communication, and control, while providing technical direction and ensuring compliance with quality standards on one or more projects. Responsibilities: SAFETY: Promotes job site safety, encourages safe work practices and rectifies job site hazards immediately. Ensures all company employees and contractors are adhering to the company safety policy. Completes and documents frequent job site safety inspections. Immediately addresses and rectifies any violations. Oversees the implementation of the company Health and Safety Plan to all personnel (employees, Subcontractors, and Visitors). Conducts safety meetings at each job site on a regular basis. Is alert for safety issues and adherence to our safety program by all employees under his supervision. SCHEDULE: Maintains weekly construction schedule, identifies and solves problems Orders materials and schedules inspections as necessary throughout the process Work in partnership with PM to maintain an updated and accurate project schedule that reflects the changes in project status and that meets the cost and time requirements of the project Maintains and updates the three week project forecast to ensure that: a. All materials have been ordered and will be delivered on time b. All equipment needed have been requisitioned on a timely basis c. All sub-contractors have been contacted to confirm schedule JOBSITE: Responsible for erecting job sign as soon as possible at the job site. Sign should be highly visible, clean, plumb, level, posts painted white. Coordinates and supervises all construction activities, maintains an organized job site, including the construction office. Oversees all daily field operations to ensure proper site safety, construction, progress, quality control and a clean site. Directs all field personnel to achieve completion of the project on schedule, within budget, with quality workmanship that conforms to original plans and specs. Develops comprehensive understanding of project strategy and commitments including financial goals, scheduling, logistics, phasing, milestones, inspections. Identifies, troubleshoots and resolves problems on projects before they become major issues. Understands all of the contractual obligations of the plans, specifications, addendums and submittals for their project. Complies with all policies and procedures of company. Verifies with Office Manager that all Subcontractors have proper licenses, insurance information, up to date Labor and Industries payments and financial capabilities to complete their work. Keeps time card and turns in to office manager monthly. COMMUNICATION: Prepares and sends weekly project updates to the owner(s), project manager, and president. Works in partnership with project manager to identify and address issues of constructability or lack of scope during pre-construction phase Maintains positive relationships with customers, contractors, suppliers and other employees. Communicates with company personnel and sub-contractors to ensure they understand the work, the planned approach and any problem areas (with a back-up plan). Reports to the Project Manager on a daily basis, especially when there are any occurrences that can affect the successful completion of the project. Reviews RFIs continuously and identify any issues which might affect the project. Communicates with the project manager the issues and the proposed actions to resolve the problem. Informs president of any major problems on the job. Participates in development and final review of scope, buy-out and schedule Researches, reviews and address any owner, landlord, city/state requirement or procedure to avoid project delays, ensure safety, and/or ensure client satisfaction Demonstrates and maintains effective and open dialogue with the project team regarding changes in work, job conditions, subcontractor relations and any deviation in the direction of the project Promotes positive subcontractor relations by dealing professionally and fairly with all subcontractors and vendors instilling this philosophy in project team at all times Actively participates in all company-wide training and development initiatives, also work with and mentor assistant superintendent, labor and carpentry staff PROJECT CLOSE OUT: Prepares, schedules and supervises completion of a final punch list. Complete the punch list immediately, while construction is still ongoing if possible. Maintains and reviews punch list process to ensure all are addressed and executed in a timely manner Assists in preparing the project close out manual and plans for the owner and reviews final product with owner or owner’s rep. Exceeds client expectations for each project by understanding client needs, wants, preferences and culture Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

A leading environmental services and infrastructure company is looking to add a Safety Manager to support operations across New Jersey, based in the Paramus, NJ area. This role will focus on strengthening health, safety, and security practices across multiple operational sites while building a strong, proactive safety culture. This person will be tasked with providing senior-level leadership, driving compliance, and reducing risk in complex, regulated environments. It’s a strong opportunity for an experienced safety leader to influence strategy while remaining closely connected to field operations. The Role • Lead and evolve division-wide health, safety, and security programs to improve safety culture, compliance, and behavioral performance across multiple facilities., • Serve as the senior HSS authority for the New Jersey division, partnering closely with operations and leadership to assess risk, implement preventative strategies, and support ongoing and new initiatives., • Manage and mentor a safety professional while overseeing training programs, audits, inspections, and field coaching efforts., • Direct incident investigations, injury case management, and workers’ compensation activities, ensuring strong root-cause analysis and executive-level reporting., • Analyze safety data and trends to develop predictive insights, guide decision-making, and reduce incidents across diverse operational environments. The Candidate • Bachelor’s degree in Safety, Environmental Engineering, or a related discipline, with 5+ years of experience in health, safety, and security compliance., • Background in construction, industrial, utility, or similar high-risk operational environments with strong regulatory exposure., • Demonstrated ability to lead safety strategy while remaining hands-on in the field with crews and site leadership., • Strong communicator and coach, comfortable influencing at all levels of an organization and managing competing priorities., • Professional safety certifications (CSP, CHMM, OSHA instructor credentials) are preferred, along with the ability to be on-call and travel regularly within the region.

Position Summary The Switchgear Project Manager/ Estimator is responsible for leading the technical sales, application engineering, and project execution support for medium- and low-voltage switchgear solutions. This role serves as the primary subject matter expert for switchgear products, supporting internal sales teams, customers, and manufacturers to drive revenue growth, ensure technical accuracy, and deliver high-quality project outcomes. About the Role Key Responsibilities Technical Expertise & Application Support • Serve as the in-house expert for low- and medium-voltage switchgear, switchboards, panelboards, and related power distribution equipment, • Review customer specifications, single-line diagrams, and construction documents to develop compliant solutions, • Provide equipment selection, sizing, and configuration support (breakers, bus ratings, protection schemes, etc.), • Ensure compliance with applicable codes and standards (NEC, UL, ANSI, IEEE) Sales Support & Business Development • Partner with outside and inside sales teams to develop quotations and technical proposals, • Engage with contractors, engineers, and end users to influence equipment specifications and win projects, • Identify opportunities to upsell value-added solutions (custom assemblies, engineered systems, service packages), • Support bid strategy, pricing, and negotiation for complex switchgear projects Project Management & Execution • Act as technical lead throughout the project lifecycle—from quotation through order, submittals, production, and delivery, • Review and approve submittals, shop drawings, and bills of material, • Coordinate with manufacturers to ensure accuracy, lead time alignment, and issue resolution, • Support logistics planning, including delivery sequencing and site requirements Manufacturer & Vendor Coordination • Maintain strong relationships with key manufacturers, • Stay current on product updates, new technologies, and factory capabilities, • Escalate and resolve technical or commercial issues with vendors Qualifications • 1++ years of experience in switchgear, power distribution, or electrical equipment sales/application engineering, • Strong knowledge of distribution systems Required Skills Technical Skills • Deep understanding of switchgear design including protective devices, bus systems, arc flash mitigation, and coordination, • Ability to read and interpret single-line diagrams, specifications, and construction drawings, • Familiarity with manufacturer configuration tools Business & Interpersonal Skills • Strong commercial acumen with experience supporting high-value, complex bids, • Excellent communication and customer-facing skills, • Ability to manage multiple projects and deadlines simultaneously, • Leadership mindset with a collaborative, team-oriented approach Preferred Skills • Experience with mission-critical environments (data centers, healthcare, industrial facilities), • Knowledge of medium-voltage equipment (VFI switchgear, metal-clad gear, unit substations) Pay range and compensation package Salary is commensurate with experience • Key Performance Indicators (KPIs), • Revenue growth and gross margin on switchgear projects, • Quote conversion rate and project win percentage, • Accuracy of proposals and reduction in order errors, • On-time project delivery and customer satisfaction, • Internal training effectiveness and team engagement Equal Opportunity Statement We are committed to diversity and inclusivity.

We are seeking an ESS Heavy Transportation & Project Logistics Manager, who will lead the development, coordination, and execution of complex Energy Storage System (ESS) logistics projects across Americas. This role is intended to establish LX Pantos’ capability to compete in: • ESS logistics,, • engineered transportation,, • oversized project cargo,, • and future infrastructure logistics opportunities through a scalable and repeatable operational model rather than reactive project-based execution. ■ About the Role The ESS Heavy Transportation & Project Logistics Manager will serve as the central solution owner for ESS-related transportation, yard operations, permitting coordination, specialized carrier management, and cross-functional project execution. This position is responsible for transforming one-time project execution into a scalable and repeatable logistics capability by establishing operational playbooks, carrier ecosystems, engineering coordination processes, and structured execution governance. The role acts as the primary internal project lead between: • Sales, • Contract Logistics, • Transportation Procurement, • StarLinks / BoxLinks ■ Responsibilities 1. ESS Project & Solution Management • Lead end-to-end ESS logistics projects from RFQ stage through operational execution., • Design transportation and yard operation concepts for ESS and oversized cargo movements., • Coordinate routing, permitting, compliance, equipment sourcing, and execution planning., • Act as the primary internal project manager for ESS opportunities. 1. Heavy Transportation & Carrier Management • Build and manage a qualified heavy-haul carrier network across North America., • Support onboarding and qualification of specialized carriers and project logistics partners., • Validate carrier capabilities, route feasibility, and operational reliability., • Coordinate with transportation procurement teams on pricing, capacity, and risk mitigation. 1. Yard & Infrastructure Coordination • Support yard selection, operational design, and equipment requirements for ESS storage operations., • Coordinate yard layout concepts, handling flows, and operational readiness plans., • Support evaluation of straddle carriers, specialized chassis, lifting equipment, and heavy handling solutions. 1. Permit & Route Engineering Coordination • Coordinate with internal and external stakeholders regarding: DOT regulations, overweight permits, state routing requirements, escort requirements, and route engineering., • Maintain standardized routing and permit playbooks for future ESS projects. 1. Cross-Functional Project Leadership • Lead coordination across: Sales, CL, StarLinks, BoxLinks, Operations, Procurement, PI, and external partners., • Establish clear project governance and milestone tracking., • Manage RFQ timelines, deliverables, and escalation processes. 1. Product & Capability Development • Support development of a scalable ESS logistics product offering., • Build standardized: RFQ frameworks, pricing models, operating procedures, risk assessments, and execution playbooks., • Identify capability gaps and support long-term operational roadmap development. ■ Qualifications • 7+ years of experience in Heavy transportation, Project logistics, Oversize & overweight transportation, Energy / ESS / infrastructure logistics, EPC or industrial project management, • Specialized trucking or project cargo operations, • Strong understanding of heavy-haul transportation, permitting processes, route planning, and project execution., • Experience coordinating cross-functional logistics projects., • Strong commercial and operational understanding., • Ability to manage multiple stakeholders in fast-paced project environments., • Experience working with specialized carriers, transportation providers, or industrial logistics vendors., • Strong communication and project leadership skills. ■ Preferred Qualifications • Experience with ESS/BESS logistics, renewable energy infrastructure, battery logistics, data center infrastructure, transformer logistics, wind/solar project cargo, or industrial EPC projects., • Knowledge of DOT regulations, overweight permitting, hazardous cargo handling, and engineered transportation solutions., • Existing carrier/vendor network within North America heavy-haul market., • PMP certification or similar project management background preferred. ■ Job Location Primary location: Teaneck, NJ / Chicago, IL Pay range and compensation package Medical, Dental, Vision Insurance Plan (100% Employer paid) 401K Plan w/ Employer Match Life Insurance Plan (100% Employer paid) Generous PTO, Paid Holiday, Floating Holiday Equal Opportunity Statement We are committed to diversity and inclusivity.

Program Manager - Shop App Push Notifications Top Skills • Project Management: Strong organizational and multitasking skills to manage multiple campaigns and stakeholders effectively., • Data-Driven Decision Making: Proficiency in analyzing performance metrics and using insights to optimize campaigns., • Communication & Collaboration: Excellent verbal and written communication skills to coordinate with cross-functional teams and craft compelling notification content. Schedule: Fully onsite Summary The main function of a non-IT project manager is to plan, direct, or coordinate activities in such fields as engineering, research and development, financial systems and product roll-out, etc or any other non-IT based project. Job Responsibilities Coordinate projects, making detailed plans to accomplish goals and directing the integration of technical activities. Present and explain proposals, reports and findings to clients. Analyze technology, resource needs and market demand, to plan and assess the feasibility of projects. Confer with management, production and marketing staff to discuss project specifications and procedures. Review and recommend or approve contracts and cost estimates. Skills Verbal and written communication skills, problem solving skills, attention to detail and interpersonal skills. Ability to work independently and manage one's time. Knowledge of production processes, quality control, costs and other techniques for maximizing the effective manufacture and distribution of goods. Knowledge of business and management principles involved in strategic planning, resource allocation, and production methods. Knowledge of computer software, such as MS Word, MS PowerPoint, MS Project, Visio etc. Education/Experience Bachelor's degree in business administration or a related field. PMI or PMP certification preferred. Key Responsibilites/Requirements 5-7 years experience required. Key Responsibilities • Strategy & Planning: Develop and implement a comprehensive push notification strategy aligned with business goals, user segmentation, and personalization., • Execution & Optimization: Oversee the end-to-end process of push notification campaigns, including content creation, A/B testing, scheduling, and performance tracking., • Cross-functional Collaboration: Work closely with marketing, product, engineering, and design teams to ensure seamless execution and alignment with broader app initiatives., • Data Analysis & Reporting: Monitor KPIs (open rates, click-through rates, conversion rates) and leverage insights to refine strategies and improve performance., • Compliance & Best Practices: Ensure all push notifications adhere to industry best practices, privacy regulations, and company policies. Education Requirement • Bachelors degree in Marketing, Business, Communications, or a related field. Years of Experience • 5+ years of experience in digital marketing, product management, or a related role, with at least 2 years focused on push notifications or mobile app engagement. Preferred Qualifications • Experience with push notification platforms (e.g., Firebase, Braze, OneSignal)., • Familiarity with user segmentation and personalization techniques., • Knowledge of A/B testing methodologies and tools.

Thales people architect identity management and data protection solutions at the heart of digital security. Business and governments rely on us to bring trust to the billons of digital interactions they have with people. Our technologies and services help banks exchange funds, people cross borders, energy become smarter and much more. More than 30,000 organizations already rely on us to verify the identities of people and things, grant access to digital services, analyze vast quantities of information and encrypt data to make the connected world more secure. Are you a results-driven Service Delivery Manager with a passion for excellence in complex IT environments? Join a world-leading technology company and play a pivotal role in delivering mission-critical Government Program Solutions across software and hardware ecosystems. About the Role As our Service Delivery Manager, you will be the cornerstone of our customer relationships, ensuring every contractual commitment is met, every SLA is exceeded, and every client experience reflects the highest standard of service. You will lead the end-to-end management of support & maintenance contracts covering Thales and third-party solutions, driving satisfaction, performance, and growth. What You'll Do Own the Customer Relationship - Serve as the primary point of contact for Support & Maintenance contracts, building trusted, long-term partnerships with government clients Drive Account Performance - Deliver actionable KPI and SLA reports, provide strategic evolution advice, and identify upsell and contract renewal opportunities Manage Financial Health - Oversee contract financials, track profitability, and ensure sustained customer satisfaction through proactive engagement Govern Third-Party Vendors - Lead communication, performance monitoring, and accountability across all third-party contract partners Lead Incident & Escalation Management - Coordinate incident follow-up, manage critical escalations, and ensure SLA compliance at every stage Oversee Preventive & Corrective Actions - Execute scheduled preventive maintenance, software upgrades, and new release deployments in alignment with contractual obligations What We're Looking For Bachelor's or Master's degree in Engineering, Computer Science, or a related technical field. 5+ years of proven experience as a Service Delivery Manager, or in a relevant role managing complex IT solutions, systems integration, or enterprise computing environments Full professional fluency in English and Spanish (written and spoken). Strong communication and presentation skills - ability to simplify the complex and inspire confidence. * Willingness to travel across LATAM. Nice to have: ITIL, PMP and BPMS certifications. Hybrid role based in Bogotá D.C. (Parque de la 93). Say HI and learn more about working at Thales (Click Here) #LI-JCB #LI-HYBRID At Thales we provide CAREERS and not only jobs. With Thales employing 80,000 employees in 68 countries our mobility policy enables thousands of employees each year to develop their careers at home and abroad, in their existing areas of expertise or by branching out into new fields. Together we believe that embracing flexibility is a smarter way of working. Great journeys start here, apply now!

Versa Products Company, Inc. (VERSA) is a global engineering and manufacturing company specializing in solenoid, pilot, and manually actuated directional control valves and related components. VERSA products are used in valve automation, fluid power, and customized solutions serving industries such as energy, manufacturing, aerospace, and utilities. Our products are built for reliability and performance in the most demanding industrial environments. At VERSA, we thrive in a collaborative environment where curiosity, problem-solving, and accountability drive results. With over 75 years of excellence, we are committed to continuous improvement, exceptional service, and product innovation—backed by our industry-leading 10-year warranty. Position Summary VERSA is seeking an experienced and driven Quality Manager to lead all aspects of product quality, inspection, and quality systems within our manufacturing environment. This role is responsible for ensuring that products, processes, and documentation consistently meet established quality standards. The Quality Manager will partner closely with Manufacturing, Engineering, and Supply Chain to enforce quality requirements, resolve technical issues, and drive continuous improvement. This position plays a critical role in maintaining the Quality Management System (QMS) and ensuring ISO compliance. Summary of Essential Job Functions • Lead and manage all inspection activities, including development of new inspection processes and equipment, • Oversee and maintain the Quality Management System (QMS) and ensure ISO 9001 compliance and audit readiness, • Develop, monitor, and drive improvement of quality KPIs and apply statistical analysis to manufacturing operations, • Manage the non-conformance and corrective action process, ensuring effective root cause analysis and prevention of recurrence, • Collaborate with Manufacturing, Engineering, and Supply Chain to improve product quality and process efficiency, • Review manufacturing procedures and recommend improvements to enhance quality, performance, and reliability, • Conduct internal audits, system audits, and supplier quality assessments to ensure compliance with specifications and standards, • Manage supplier quality performance, including root cause and corrective actions, • Investigate and resolve customer complaints and quality issues in partnership with Sales and Customer Service, • Prepare and maintain quality documentation and reports, including analysis of trends, failures, and corrective actions, • Identify and prioritize opportunities for process improvement, automation, and cost reduction, • Plan and lead training initiatives related to quality systems and procedures, • Partner with senior leadership to establish quality policies, procedures, and strategic goals, • Lead and develop the Quality team (QC inspectors, technicians, QA personnel): o Recruiting, hiring, and training o Assigning and directing work o Performance management and development • Foster cross-functional collaboration and act as a catalyst for continuous improvement and change, • Stay current with industry standards, technologies, and best practices Minimum Requirements • Bachelor’s Degree in Engineering, Business Administration, or related field preferred, • Minimum of 5 years of experience in quality management within a manufacturing environment, • Minimum of 5 years of leadership experience managing teams, • Strong knowledge of: o Quality Management Systems (QMS) o ISO 9001 standards o ERP systems o Mechanical component inspection o Continuous improvement methodologies (Lean, Six Sigma) • Lean Six Sigma Green Belt or Black Belt strongly preferred, • Strong analytical, problem-solving, and data analysis skills, • Excellent communication, interpersonal, and organizational skills, • Proficiency in Microsoft Office and data/reporting tools Abilities Required • Hands-on experience with precision inspection tools (calipers, CMM, Keyence, etc.), • Ability to define problems, collect data, and draw valid conclusions, • Ability to interpret technical instructions, drawings, and specifications, • Strong attention to detail with a bias for action and results, • Ability to work effectively in a dynamic manufacturing environment, • Adaptability in situations involving change, ambiguity, and competing priorities There is a reason many people join VERSA and stay for decades! We are a family-oriented organization with opportunities to grow.

Tool Room Manager About Company At ENNOVI we harness the power of two megatrends - electrification and AI - to help industries innovate at speed, operate smarter, and achieve sustainable growth. By combining these transformative forces with our global reach and best talent, we empower our customers to lead their markets and drive sustainable progress. From automotive to aerospace, consumer electronics, data storage, industrial, and medical markets, we help our customers achieve these megatrends by creating smarter, safer, and more sustainable solutions. We excel in developing high-performance, custom solutions that meet diverse technical needs, solve unique challenges, optimize performance, and adapt to evolving market demands. Our mission is to get customers to the future faster, from anywhere. Headquartered in Singapore, ENNOVI has a global presence across North America, Europe, SEA and China, where all its activities are socially responsible, with minimal environmental impact. Learn more at www.ennovi.com. Why Join Us At ENNOVI, we envision a future of electrification and innovation and strive to create an inspiring workplace where our employees are integral to shaping that future. We offer a dynamic, collaborative, and inclusive culture that encourages continuous learning, professional growth, and a sense of purpose. As a part of the ENNOVI team, employees experience the excitement of being at the forefront of cutting-edge technologies and contributing to a sustainable future. Our commitment to the transformation is epitomized by our five pillars: Speed, Innovation, Best Talent, Global Reach, and Sustainability. This entails navigating exponential market changes through agile structures, fostering innovation across all aspects of our business, strategically expanding our global footprint, championing sustainability initiatives and nurturing a winning team. Privacy Policy ENNOVI is an equal opportunity employer in conformance with all applicable laws and regulations to individuals who are qualified to perform job requirements. The Company administers its personnel policies, programs, and practices in a non-discriminatory manner in all aspects of the employment relationship, including recruitment, hiring, work assignment, promotion, transfer, termination, wage and salary administration, and selection for training. By applying to this job posting, you agree with and acknowledge our privacy policy. Job Summary The Tool and Die Maker in the NJ plant is responsible for creating and maintaining tools and equipment to support production. This person will have in-depth knowledge of metalwork and engineering, a good eye for detail, and the ability to visualize structural components. They will also translate ideas into expertly crafted metal forms ready for the manufacturing process. The Tool and Die Maker will collaborate with their team and demonstrate ENNOVI’s values of accountability, teamwork, and integrity. Main Responsibilities • Manages the workflow in the Tool Room Department to ensure schedules are met., • Communicates all issues of operations in the Tool Room to the appropriate department so issues can be resolved in a timely manner., • Oversee the programming, set up, and operation of the CNC lathes, mills, EDM machines, and grinders to produce precision parts according to engineering drawings and specifications., • Managing tool room staff, including assigning tasks and providing guidance., • Training staff in proper tool handling, safety procedures, and inventory management. Qualifications • High School Diploma with 8-10 years of experience in manufacturing, design, and tooling., • Prior experience in the mobility industry is preferred., • Significant experience in tool room operations or a similar role, typically requiring at least 3-5 years of supervisory experience., • Excellent written and verbal communication skills for interacting with team members, suppliers, and other departments., • Excellent organization skills to manage inventory, maintain records, and maintain organization within the tool room., • Strong understanding of tools, equipment, and related manufacturing processes., • Ability to diagnose and resolve technical issues.

Key member of the marketing team responsible for managing the digital marketing programs to support the retail, at-home, and ecommerce business units. He/she will help manage the paid search, email marketing, social media and other digital programs that are important part of overall marketing effort. Digital Marketing Analyst must be hands-on, very analytical and have relevant digital marketing experience in a multi-location retail or service business. Responsibilities: • Direct and manage digital marketing programs including paid search, email marketing, paid social, etc. and coordinating these to support the promotional marketing calendar, • Analyze all results and attribute marketing spend to traffic and sales, • Use SEO and SEM to drive organic and overall website traffic, • Direct and manage all social media efforts with the goal of developing brand ambassadors, brand influencers and indirect referrals, • Monitor competitive activity and develop counter programs to ensure pre-eminence of the BTG brand online, • Led effort to analyze marketing metrics to identify cause-effect relationships and suggest ways to utilize these insights in new campaigns, • Work with other marketing managers to develop and implement marketing campaigns that drive traffic and sales, • Work with creative team to create digital marketing content, • Work with other marketing manager to design consumer research that offer insight into customer behavior and recommend programs that attract new customers Requirements: • Bachelor degree in marketing, economics, mathematics, statistics, sciences or engineering, • 3+ years’ experience in digital marketing in retail, consumer product/service, consulting business, • Multi-channel marketing experience generating and tracking leads, traffic, etc., • Experience in data-driven business culture; experience measuring and attributing marketing spend to results, • Experience with SEO, PPC, content marketing, paid search and social marketing, • Working knowledge of database marketing, email marketing, statistical analysis, • Strong analytical, problem-solving, data manipulation and planning skills, • Strong computer skills including (Excel, Google Analytics, relational databases etc.), • Entrepreneurial, hands-on, and able to work independently, • High level of self-motivation and intellectual curiosity, • Good oral and written communication skills We will invest roughly 3 months setting up the Digital Marketing Analyst for success at BTG. He/she needs to develop a strong knowledge of sales, business and marketing process and relationships and strong instincts for the brand and business. Development plan will be individualized, but will include time in stores understanding the customer, how product is sold, and BTG’s competitive advantage.

Vice President Marketing Vice President of Marketing is responsible for developing a 360-marketing plan and leading and leading a marketing team that supports growth of the retail, shop-at-home, and trade business units. He/she is responsible for developing and executing a comprehensive strategy that builds new customers and drives sales across all channels. He/she must have keen insight of Blinds to Go business and brand strategy and be able to balance short-term results with long-term brand positioning. He/she must be a hands-on manager, an astute analyst and good strategist. He/she must have relevant experience in a multi-location retail or service business with knowledge of lever to drive store traffic and shop at home leads. Responsibilities: · Direct and a manage internal marketing team that includes digital marketing manager and analyst, social media team, creative team, web development team, and regional marketing managers · Develop a 360-marketing plan and calendar that drive business short-term and build brand · Monitor competitive activity and develop counter programs to ensure pre-eminence of the BTG brand online · Develop and sustain a culture that values analytical problem-solving, collaboration, ownership and accountability · Work with other department to lead programs and activities that contribute to growth of business and brand Requirements: · Bachelor’s or master’s degree in marketing, communications, or cognitive sciences, mathematics, statistics, sciences or engineering · 10+ years experience in digital marketing in retail, or consumer product/service business · Multi-channel marketing experience · Experience with SEO, PPC, content marketing, paid search and social marketing · 5+ years management and leadership experience · Working knowledge of database marketing, email marketing, statistical analysis · Strong analytical, problem-solving, data manipulation and planning skills · Strong computer skills including (Excel, Google Analytics, relational databases etc.) · Entrepreneurial, hands-on, and able to work independently · High level of self-motivation and intellectual curiosity · Good oral and written communication skills We will invest 6-9 month onboarding this senior manager to ensure their long-term success at Blinds to Go. He/she Will develop a strong knowledge of sales, business and marketing process and relationships and strong instincts for the brand and business. Development plan will be individualized, but will include time in stores understanding the customer, how product is sold, and BTG’s competitive advantage and mentoring from business owners.

Job Description Build Your Career. Build Your Legacy. At Western Specialty Contractors, You're an Owner. For more than 110 years, Western Specialty Contractors has been building more than projects—we've been building people, careers, and communities. Founded in St. Louis and proudly employee‑owned through our ESOP, we are the nation's largest specialty contractor, restoring and protecting building envelopes through expertise in facades, concrete, roofing, and waterproofing. Why Western? As an employee-owned company, you're not just working for Western—you're working with Western. Every team member has a stake in our success. That ownership mindset fuels a culture where people look out for each other, take pride in their work, and know their contributions truly matter. Grow With Us With 30+ branches nationwide, Western offers opportunities to build a career that grows with you. From hands-on field experience to specialized training and leadership development, we invest in your future at every stage. Position Overview The Region Business Development Manager assists branch personnel in achieving annual sales objectives by providing marketing, sales, and business development leadership. This candidate will work with specific branches within an assigned region. The position is a primary resource to meet and/or exceed the corporate objectives of sales volume growth, customer development, and new business acquisition, working closely with the corporate National Account Department as a resource for local and regional contacts. Job Responsibilities • Establish productive, professional relationships with key local/regional decision makers at targeted accounts as determined by branch personnel, • Coordinates closely with Western personnel, making appropriate introductions to key client contacts to assist with local account development based on the annual marketing plans, • Strong participation in professional trade associations, including committee participation (ex. Ashe, APPA, BOMA, IREM), • Identify, research, and network with potential new accounts within the assigned region, • Lead expansion into new recession-proof markets to support the overall growth strategy, • Review and analyze results of past campaigns to facilitate the development of new initiatives and partnerships within the market, • Schedule, coordinate, and present educational and persuasive seminars, presentations, workshops, and customer appreciation events, • Develop ideas on how to close existing opportunities with branch personnel, • Work with Corporate Marketing to develop and publish newsletters, social media, email blasts, mailers, and other customer publications, • Proactively assess, clarify, and validate customer needs on an ongoing basis., • Lead solution development efforts that best address customer needs, while coordinating the involvement of all necessary company personnel, • Provide sales and presentation skills training to staff, • Manage, train, and analyze data of the CRM system, • Aid in the development and support of National Account partners within assigned region Accountabilities and Performance Measures • Meet/exceeds assigned activity expectations, implementing goal planning on an annual, quarterly, and monthly basis, • Uses CRM and the company-implemented measures to plan and track activity, • Achieves strategic customer objectives defined by the company, • Completes strategic customer account plans that meet company standards, • Maintains high customer satisfaction ratings that meet company standards, • Completes required training and development objectives within the assigned time frame Organizational Alignment • Reports to Region Manager, • Closely coordinates with National Accounts Program Manager to strategize client targeting priority and account maintenance, • Works closely with Branch personnel to determine appropriate outreach efforts and methods Qualifications • A four-year college degree from an accredited institution, preferred but not required, • Minimum of two years of business development experience, • Candidate has existing architectural, engineering, and consulting relationships within the market, • Current commercial real estate, healthcare, and educational contacts are highly preferred, • Valid driver's license and access to a personal vehicle (monthly vehicle allowance provided), • Strong public speaking abilities, • Demonstrated experience in strategic sales in a business-to-business sales environment, • PC proficiency, • CRM experience Environmental Job Requirements and Working Conditions • This position requires 25% travel Compensation for this role is determined using a variety of factors, including experience, skills, internal equity, market benchmarks, and the cost of labor in the different geographic locations where we operate. In addition to base pay, this position may also be eligible for: • Beneficial ownership in the Company through Western's Employee Stock Ownership Plan (ESOP)., • Participation in the Company's annual performance-based bonus program., • A comprehensive benefits package, which includes health, dental, and vision coverage, a 401(k) plan with company match, paid time off, maternity leave, and additional benefits designed to support employees and their families.US Pay Range$136,000—$200,000 USD Western Specialty Contractors does not discriminate based on race, sex, color, religion, age, national origin, marital status, disability, veteran status, genetic information, sexual orientation, gender identity, or any other reason prohibited by law in the provision of employment opportunities and benefits. To view Western Specialty Contractors' SMS Terms of Service, click here. To view Western Specialty Contractors' SMS Privacy Statement, click here.

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description About the Role We’re looking for a strategic and technically strong Manager, Analytics Engineering to scale our data foundation. This role will lead the evolution of our Databricks environment, building high-quality datasets and forecast models that power insights across audience, content, and revenue. You’ll partner closely with analytics and data engineering teams to improve how data is structured, defined, and used, setting standards for modeling, quality, and documentation. Your work will ensure analysts can work directly in the warehouse with confidence, accelerating insight generation and raising the technical bar across the team. Key Responsibilities • Own and evolve the teams Databricks environment, creating clear and scalable structures, • Partner with data engineering to enhance upstream (silver-layer) data models and pipelines, • Ensure data is reliable, performant, and aligned with business definitions, • Set standards for data modeling, QA, and documentation, • Coach and support analysts in writing production-quality SQL and building transformations, • Build forecasting and modeling frameworks for digital traffic and subscriber forecasting, • Partner with analytics and business teams to prioritize high-impact data investmentsQualifications, • 5 years of experience in analytics engineering, data analytics, or a related field, • Strong expertise in SQL and working in modern data platforms (e.g. Databricks), • Experience building and maintaining data models across bronze/silver/gold layers (or equivalent), • Proven ability to define and enforce data quality, testing, and documentation standards, • Experience developing forecasting or statistical models (e.g., for traffic, revenue, or subscriptions), • Strong understanding of how analysts use data, with a passion for improving self-service and scalability, • Ability to balance hands-on technical work with enablement and mentorship of others, • Excellent collaboration skills, with experience partnering with data engineering and cross-functional teams Additional Information: • Hybrid: This position has been designated as hybrid, generally contributing from the office a minimum of three days per week. This position is eligible for company sponsored benefits, including medical, dental and vision insurance, 401(k), paid leave, tuition reimbursement, and a variety of other discounts and perks., • Salary range: $110,000 - $130,000 (bonus eligible) Location & Perks: At CNBC Headquarters in Englewood Cliffs, NJ, you’ll have access to great perks and amenities: • Sweat it out -- Free onsite fitness center with state-of-the-art equipment, plus daily group classes, • Eat up -- Gourmet cafeteria with daily specials plus soup and salad bars, • Extras -- Dry cleaning, shoe shining and sneak peeks, • Don’t have a car? No problem! We offer free shuttle transportation to and from multiple locations in Manhattan, Brooklyn, Hoboken and Jersey City Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to candidateaccessibility@versantmedia.com. VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job Description Job Title: Product Manager B2B Security Location: Remote Job Description: Hanwha Vision America (HVA), a subsidiary of the Hanwha Group, is a global leader in video surveillance and physical security solutions. We deliver cutting-edge IP cameras, cloud platforms, access control solutions, and video management systems (VMS), trusted across industries including retail, transportation, education, banking, healthcare, and critical infrastructure. As we expand our footprint in the access control space, we are looking for a high-impact Product Manager to join the team building next generation of access control solutions — built at the intersection of hardware, cloud, and AI. This is not a maintenance role — this is a build-and-scale opportunity. You will help to own the product strategy and execution for our access control solutions portfolio, working at the intersection of hardware, cloud software, and AI. You will partner with engineering, sales, and leadership to define what we build, why we build it, and how we win in a highly competitive market. If you are a self-starter with deep access control domain expertise, a sharp eye for detail, and a passion for shaping the future of physical security, we want to talk to you. Key Responsibilities: Product Strategy & Roadmap: Own and drive the product roadmap for access control solutions, aligned with company strategy and market opportunities. Define and communicate a clear internal and external roadmap with prioritization rationale. Customer & Market Discovery: Lead voice-of-customer sessions, field discovery interviews, and on-site visits to deeply understand user needs and pain points across security integrators, IT teams, facility managers, and enterprise end users. Requirements & Specifications: Translate customer needs, field feedback, and market insights into clear product requirements, user stories, and functional specifications. Define standards for security, uptime/SLA, UI/UX accessibility, and integration quality. Competitive Intelligence: Lead competitive analysis and define positioning to differentiate HVA's access control portfolio in the market. Conduct ongoing benchmarking against leading cloud and on-premises solutions. Feature Prioritization: Develop data-driven prioritization frameworks to balance customer value, business impact, and technical feasibility. Manage the backlog and drive Agile delivery in collaboration with engineering teams globally. Cross-Functional Execution: Work cross-functionally with engineering, sales, marketing, and support to deliver high-quality products on time. Liaise with global development teams, accommodating cross-timezone collaboration as needed. Go-to-Market & Launch Support: Partner with go-to-market teams to support product launches, sales enablement, field readiness, and customer success. Develop comprehensive product documentation, training materials, and marketing collateral for each release. Commercial & Ecosystem Strategy: Develop a strong understanding of pricing strategy, packaging, ecosystem dynamics, and profitability levers. Identify and evaluate new product opportunities in cooperation with sales to increase competitiveness and revenue. Partner & Supplier Engagement: Work with OEM partners, hardware suppliers, and third-party vendors to support product definition, integration requirements, and lifecycle planning. Represent HVA's access control portfolio at tradeshows, sales meetings, and industry events. Product Lifecycle Management: Manage the complete access control product lifecycle from concept through end-of-life, including migration strategies for customers transitioning from legacy on-premises systems to cloud-based solutions. Qualifications: • 5+ years of experience in product management within access control, physical security technology, or related B2B SaaS/hardware domains, • Deep understanding of access control systems — hardware (readers, controllers, credentials) and software (cloud, on-premises, hybrid architectures), • Demonstrated ability to take products from concept to launch and drive measurable business impact, • Proven experience building customer-facing products and conducting voice-of-customer research at scale, • Experience working with partners, OEMs, channel integrators, and external vendors in a reseller/dealer model, • Familiarity with cloud-based architectures, modern SaaS models, and API/integration ecosystems, • Strong analytical mindset with ability to make data-driven decisions and develop prioritization frameworks, • Proficiency with product management tools (e.g., Jira and Confluence) and design collaboration tools (e.g., Figma), • Excellent written, verbal, and executive-level communication skills, • Ability to operate in a fast-paced, cross-functional environment with competing priorities, • Bachelor's degree in Computer Science, Engineering, Electronics, or a related field (or equivalent experience), • Willingness to travel up to 30% for customer sites, partner meetings, and industry tradeshows (e.g., ISC West) Preferred Qualifications • Experience integrating AI/ML capabilities into physical security or IoT products, • Familiarity with video surveillance platforms, VMS, visitor management, or smart building ecosystems, • Demonstrated track record of driving UI/UX differentiation in hardware-enabled software products, • Knowledge of cybersecurity best practices, data privacy standards, and product compliance (e.g., SOC 2, ISO, UL, GDPR), • Experience managing on-premises-to-cloud product migration strategies for installed base customers, • Prior experience in a global product role requiring cross-timezone collaboration with distributed engineering teams, • Background in enterprise verticals including retail, healthcare, education, transportation, or critical infrastructure, • Familiarity with mobile credential technologies and mobile-first access control design Hanwha Vision America provides equal employment opportunities to all employees and applicants for employment. It prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description About the Role A product & audience-focused Manager of Digital Analytics for CNBC that enables editorial and product teams with actionable insights. This role focuses on analyzing content performance, audience engagement, and consumption behavior across digital platforms, helping inform editorial strategy, audience development and product development initiatives. Key Responsibilities • Collaborate with partners in editorial, product, engineering and business stakeholders to identify requirements and ensure consistent and accurate measurement of our digital products, • Perform ad hoc analysis using SQL, build and maintain dashboards and reports and communicate analytical findings to all kinds of stakeholders, including senior leadership. Ensure the quality and reliability of these reports, • Partner with experimentation leads to ensure data-driven hypotheses, measurement plans and statistical analysis, • Monitor and report on content engagement metrics across platforms (e.g. video, articles, newsletters, podcasts, commerce). Identify high-performing formats, topics, and publishing patterns, • Mentor new team members and contribute to collaborative forums across the data organization, developing best practices and team culture, • Partner with finance to develop, maintain, and monitor operational business model and forecasting, • Work across digital and commerce businesses, reporting on relevant metricsQualifications, • 5+ years of experience in digital media analytics or related field, with a focus on product, content and audience insights., • Expertise in languages such as SQL, Python/R and experience with tools such as Databricks/Snowflake, Adobe/Google Analytics, Amplitude, Tableau/Looker/Omni, and experimentation platforms, • Strong communication skills with the ability to influence senior stakeholders and translate complex data into compelling narratives Additional Information: • Hybrid: This position has been designated as hybrid, generally contributing from the office a minimum of three days per week. This position is eligible for company sponsored benefits, including medical, dental and vision insurance, 401(k), paid leave, tuition reimbursement, and a variety of other discounts and perks., • Salary range: $110,000 - $130,000 (bonus eligible) Location & Perks: At CNBC Headquarters in Englewood Cliffs, NJ, you’ll have access to great perks and amenities: • Sweat it out -- Free onsite fitness center with state-of-the-art equipment, plus daily group classes, • Eat up -- Gourmet cafeteria with daily specials plus soup and salad bars, • Extras -- Dry cleaning, shoe shining and sneak peeks, • Don’t have a car? No problem! We offer free shuttle transportation to and from multiple locations in Manhattan, Brooklyn, Hoboken and Jersey City Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to candidateaccessibility@versantmedia.com. VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job Description Manufacturing Manager (Electro-Mechanical Equipment) We are seeking an experienced Manufacturing Manager (or) a seasoned Supervisor ready to transition to a PM with a background in manufacturing of electro-mechanical machinery, and capital equipment. (We will invest in your training, bringing you up to speed with our products) Responsibilities: • Maintained current production schedule, updated daily to track all aspects of equipment orders as they progress and communicate progress., • Manage six (6) supervisors directly, and fifty (60) indirect reports., • Provide the means to establish realistic production schedules that can be met, and schedules that will allow the Company to be competitive with respect to equipment manufacturing lead-times., • Ensure the accurate and timely entry of Production Department data into the IT system., • Conduct weekly production meetings with all applicable Production Personnel to discuss all aspects of production scheduling., • Ensure the proper handling and disposal of all hazardous materials used in the manufacturing process, • Prepare and conduct timely performance reviews for subordinate employees, • Work closely with the 'Materials Manager', who in turn, works closely with the Purchasing Department., • Assist in developing accurate manufacturing time studies that are necessary to develop realistic production scheduling and equipment manufacturing costs, • Ensure that all departments provide the type of cooperation that is essential for Production to meet commitments., • Conduct production meetings to ensure solid inter-departmental communication and continuity regarding all production-related matters., • Ensure a safe and secure work environment within the manufacturing facility., • Prioritize safety as a core value in all aspects of production., • Foster a culture of safety and accountability to minimize workplace incidents and enhance workforce well-being and productivity., • Ensure that the Production Testing Facilities in both buildings are appropriately equipped and maintained clean and tidy Requirements: • Ability to lead, mentor and coach team members., • Solid track record in overall plant management, • Strong work ethic and a high-energy level, • Prior experience with an ERP or MRP system, • Experience in supervision of the production department of a small to medium-size manufacturer., • Exposure to organizations that have in-house sheet metal, welding & fabrication, machine shops., • Mechanical or Industrial Engineering degree, a plus- NOT required., • Experience organizing production operations with a specialty machinery manufacturer., • Organizational Skills:, • Ensuring smooth manufacturing processes, • Meeting deadlines, • Efficiently utilizing resources, • Problem-Solving:, • Identifying issues, • Analyzing root causes, • Implementing effective solutions, • Communication:, • Facilitating clear communication between departments, • Communicating effectively with the workforce, • Adaptability:, • Adjusting production schedules, • Modifying processes, • Allocating resources to adapt to changing environments., • Attention to Detail:, • Maintaining precise specifications, • Upholding quality standards throughout production, • Safety Focus:, • Creating and maintaining a safe work environment, • Promoting a safety culture among the workforce, • Customer Focus:, • Understanding and meeting customer needs, • Ensuring timely delivery and maintaining quality Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Physical Requirements: • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, kneeling, reaching, climbing, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, weather, and noise levels. What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching and mentoring, helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionPosition Description: Summary/Objective:Reporting to a member of the project management team, the incumbent will be responsible for the production Architectural Drawings/Models in AutoCAD and/or Revit for Nationwide Banks, Restaurants, Retailers and, large property management and construction companies throughout North America.The successful candidate will operate in a fast-paced team environment, working in collaboration with various staff members to meet scheduled deliverables.Essential Functions: Create drawings for industry specific projects based on preliminary sketches, concepts, and data Utilize AutoCAD/ REVIT and other programs to develop lay out and diagrams with attention to specification details Assist with technical handbooks and guidelines. Assist with research on landlord code compliances and permitting. Assist in the development of floor plans. Assist with the completion of drawings red-lined by Studio Director, Project Manager or Assistant Project Manager Ability to complete a full set of drawings with minimal errors or supervision. Assist with coordination and follow up between consultants. Occasionally carry out site surveys with project team on a needed basis Follow instructions of managers accurately with efficiency Maintain complete, readily accessible hardcopies and electronic files and records of survey reports, design direction, schedules, and any other pertinent information to the project.Qualifications: AA/BS or equivalent in Architecture, particularly work experience in Minimum 2-3 years of experience as a Draftsperson preferably within the retail, restaurant, or hospitality space. Ability to interpret construction data, engineering calculations and specifications. Proficiency in AutoCAD/Revit required, with basic knowledge of, SketchUp, Photoshop and Illustrator preferred. Experience drafting construction documents preferred. Must be comfortable in a support role and possess the ability to work with minimal supervision. Must be able to multitask and produce accurate work. Must possess strong time management skills and the ability to handle the pressure of tight deadlines. Demonstrated time management, communications and organizational skills $24.00 - $26.00 Hourly

Job DescriptionConstruction Project Manager Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves on being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation primarily for public clients. Our clients include but are not limited to NYS Office of General Services, the State University Construction Fund, Dormitory Authority of the State of New York, NYC Health + Hospitals, , NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation and various municipalities throughout the state. Position Description: Project Manager-program management services for of a varied portfolio of projects including but not limited to project planning, tracking, schedule performance, and project controls for monitoring of various building construction and renovation projects. Project involvement will begin in the initial planning stages through completion to ensure that projects meet internal requirements, are within cost limitations, and are completed per schedule. Project values generally exceed $10 million in value. Minimum Requirements: • Bachelor’s degree in engineering, Architecture, Construction Management plus 8 years of relevant construction industry experience with public and/or private projects. Prior experience managing projects with a single value in excess of $10 million or experience managing a portfolio of project totaling this amount at a given time., • OSHA 30., • Valid Driver's License and reliable transportation., • K-12 experience or Parks is a plus. Essential Skills:, • Demonstrated ability to read and comprehend plans, specifications, addenda, bid materials, contracts and related construction documents., • Proficient in project scheduling and evaluation of critical path work items., • Proficient in project cost management., • Excellent oral and written communications skills., • Demonstrated analytical and conceptual skills., • Ability to use project management software such as Procore., • Demonstrated ability to work independently and exercise sound judgment., • Proficiency in PC applications, such as Outlook, Excel, Word, and Bluebeam., • Demonstrated record of taking initiative., • Demonstrated management skills., • Demonstrated organizational skills and ability to prioritize., • Strong interpersonal and diplomacy skills if appropriate.Essential Functions:, • Establish regular lines of communication with the design team and contractor to evaluate the progress of the project., • Communicate regularly with owner and report on project progress., • Review and recommend payment for contractor invoices., • Review and recommend for execution any potential contract changes., • Assist with dispute resolution as project circumstances dictate., • Work with management, staff, clients, and contractors to manage all aspects of the project., • Ensure the retention and maintenance of records and files consistent with policies., • Efficiently manage assigned workload., • Develop, monitor, and maintain project records and reports. Input and manipulate data in applications and databases., • Coordinate with contractors, consultants, and clients to understand the project scope, evaluate construction tasks required, and to build, review and approve price proposals, and ensure the efficient flow of processes within the organization., • Schedule, manage and/or attend project-specific meetings. Participate in program-related meetings as required., • Read, interpret, and comprehend plans, specifications, reports, bid materials, contracts and other related documents. Recommend and evaluate approaches to resolving issues., • Assist with monitoring performance measures, goals, and objectives., • Develop, prepare, and maintain various program-related reports, spreadsheets, logs, charts and/or databases., • Work with appropriate parties on building commissioning and project close out. Benefits of Working at Laland Baptiste: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Powered by JazzHR NdgOgawaVA

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description ABOUT THE ROLE We are seeking an experienced and forward-thinking Manager, Software Engineering to lead our engineering team in building and operating reliable, scalable, and high-impact digital products. This leader will be responsible for driving engineering excellence across the full software development lifecycle, leveraging modern development practices, robust architecture and data-informed decision-making. The ideal candidate is both a strong technical leader and an effective people manager who can build and mentor high-performing teams, foster a culture of ownership and accountability, and continuously improve engineering processes. You will play a key role in shaping technical strategy, guiding system design, and ensuring the successful delivery of impactful products aligned with business goals. WHAT YOU'LL DO As a Manager, Software Engineering on our team, you will: • Serve as both a technical leader and people manager, guiding your team to make sound architectural and engineering decisions., • Support your team through regular one-on-ones, clear communication of priorities, cross-functional collaboration, and by proactively removing blockers and resolving conflicts., • Mentor and develop team members, fostering career growth, engagement, and a high-performance culture., • Partner with business and technology leadership to align on priorities, manage stakeholder expectations, and deliver impactful outcomes., • Provide accurate effort estimates and technical input for new features, enhancements, and product initiatives., • Promote ownership and accountability across the full software development lifecycle (SDLC), from design through delivery and operations., • Collaborate closely with product management and design to prioritize and execute on the team’s roadmap., • Work with fellow engineering leaders to continuously improve engineering practices, processes, and overall team effectiveness., • Encourage the adoption of AI development tools and intelligent solutions to improve productivity and product capabilities., • Participate in security and compliance governance, including PCI and PII standards., • Take on additional responsibilities as needed to support team and organizational success.Qualifications WHAT WE'RE LOOKING FOR • 8+ years in a software engineering role following Agile development processes, • 3+ years in team lead or management role, • Strong understanding of software engineering best practices, • Solid track record of leading a software engineering team in a technical capacity, • Demonstrated ability to drive technical excellence, pushing innovation and quality, • Experience leading geographically dispersed teams in a collaborative, team-driven environment., • Adept at prioritizing and balancing multiple projects in a constantly evolving environment., • Strong understanding of system design, scalability, performance and reliability best practices., • 5+ years of hands-on experience architecting, designing and developing technology platforms using Ruby on Rails, Node.js, JavaScript, TypeScript., • 3+ years of experience working with relational and NoSQL database platforms (MySQL, MongoDB), • Some experience with modern caching technologies (Redis preferred), • Experience developing and deploying applications in cloud environments, including familiarity with cloud-native architectures and services., • Deep understanding of service-oriented and event-driven architecture, • Outstanding interpersonal skills: written and verbal, in-person, and remote. BONUS POINTS FOR • Experience leveraging AI-assisted development tools or integrating AI/ML capabilities into products or engineering workflows, • Experience working in high-availability, high-traffic production environments., • Experience developing or integrating with movie theater or entertainment systems, • Experience developing Point of Sale, F&B, Ticketing, Inventory or Order Management Systems., • Experience working with CRM, Loyalty and Membership solutions, • Experience integrating Payment platforms, including EMV and card reader integrations, • Experience with DevOps and SecOps practices., • Experience with monitoring, logging and observability tools, • Understanding of the mindset of “Fail Fast, Learn Fast” and continuous improvement Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. For LA County and City Residents Only: VERSANT Media will consider for employment qualified applicants with criminal histories, or arrest or conviction records, in a manner consistent with relevant legal requirements, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, the Los Angeles County Fair Chance Ordinance for Employers, and the California Fair Chance Act, where applicable. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to candidateaccessibility@versantmedia.com. VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionThe Chief Engineer is responsible for the overall supervision of the engineering department within the facility assigned. These duties include but are not limited to the installation, repair and maintenance of the facility equipment. The oversight and upkeep of the physical plant, including grounds, utility services, HVAC, plumbing, electrical system, electronic equipment, yard and pavement upkeep in the best manner possible for the safety and health of all concerned, and to coordinate these activities as needed. Responsible for the implementation and documentation of site safety plans and all Engineering Services operational standards and guidelines as well as site specific standards, policies and procedures relating to the engineering department. The Chief Engineer will also assist the facility manager with operational and constant projects for the site. REPRESENTATIVE FUNCTIONS OR DUTIES • Provides supervision and is responsible for the implementation of all preventive maintenance and repair operations at the facility. Schedules emergency repair activities according to priority and the abilities of assigned personnel. Provides technical advice, encouragement and instruction to subordinates in such areas as electric theory, mechanical systems, hydraulic systems, and safety procedures. Perform equipment inspections, noting equipment condition, ensuring that proper maintenance is being performed in accordance with AES standards. Responsible for the implementation of the quality assurance program for all work performed by the department., • Direct or participate in various facility programs and committees relating to assigned responsibilities such as safety, disaster, fire, pollution control and civil defense., • Formulates, recommends and implements site specific policies and procedures to improve the facility physical plant and operations., • Develops a plan and/or procedure for controlling, labeling, recording estimated life expectancy, maintenance and inspecting all capital and non-capital equipment within the facility. This plan includes a long-term engineering capital plan., • Recommends equipment purchases to replace obsolete equipment items and provide assistance in formulating long-range equipment replacement requirements and coordinates actions with contractors., • Assists in the development and implementation of operating and extraordinary expense budgets as required., • Plans and schedules services of department. Establishes standards and work methods; takes steps to assure quality and quantity of performance and evaluates results. Establishes plans for improving departmental work emphasizing efficiency and economy., • Communicates policies and procedures, discusses job problems, and employee concerns with supervisors and employees. Encourages development of habits and attitudes for improved performance and good employee attitudes. Direct, train, evaluate, and counsel all engineering personnel., • Ensures that general safety, fire prevention regulations are enforced, and safe working habits are promoted throughout the facility. Ensures that all shop equipment is properly maintained and conforms to safety standards. Promotes good housekeeping principles and supervises housekeeping details., • Responsible for ensuring that the building systems are operated in the most efficient and effective manner especially as it relates to utility consumption and environmental responsibility. Implement a systematic program to promote energy awareness and conservation within the facility. Champion energy conservation programs to achieve maximum results from tenants and staff., • Maintains an on-going self-improvement program to keep abreast of new equipment, standards, codes, and maintenance procedures.Responsible for the implementation and promotion of the following, • Supports and follows ABM Engineering Services’ operational policies and standards., • Supports and follows ANM Engineering Services’ safety program., • Perform related duties as required – a “can do, will do” attitude., • Reports to and collaborates with management of the facility related issues., • Works with management on plant related and tenant related issues., • Sets and maintains a professional work environment with staff., • Assures good communication., • Ensure standards of service and commitment., • Ensure compliance with safe practices and standards., • Develops goals for department, staff and self., • Builds morale and a team approach., • Complies with employment laws and ABM Engineering Services employment practices., • Supports growth opportunities and potential.SKILLS / EDUCATION / EXPERIENCE, • Experience that is commensurate with the specific facility for the position of Chief Engineer. Prefer 5+ years progressive operations experience., • Strong employee relation skills, coaching skills and training skills., • As required, highest-level relevant state/local license for Stationary Engineer and/or HVAC, plus universal level refrigerant recovery license., • BOMA accredited courses desirable., • Preferred: High-rise Fire Safety Director, Haz-Mat Certification, Indoor Air Quality Certification, LEED Certification., • Strong oral and written communication skills., • Ability to work with MS Word, Excel, and Outlook., • Computer skills and building automation systems experience required., • Certification meeting OSHA ACM awareness training requirements as required., • Working knowledge of energy conservation required, formal training preferred.This is a Local 68 Union position. Per the CBA, effective March 2026 the wage will increase from $61.18 to $62.63. This position is eligible for a comprehensive benefits package that is provided by the Union. More information about the benefits package is available in the applicable Collective Bargaining Agreement or by contacting a Union representative. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.Privacy PolicyTerms of UseCalifornia Privacy RightsEmployee Privacy Notice EnglishEmployee Privacy Notice Spanish

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description CNBC is seeking a Senior Manager of Data Visualization to lead the next evolution of visual storytelling for CNBC.com. This role will shape how we use data to explain the most important stories in business, markets, technology, economics, and policy—turning complexity into clarity for a global audience. You’ll lead a team of visual journalists who create high-impact charts, graphics, and interactive experiences that elevate our journalism and deepen audience understanding. In addition to setting strategy and guiding the team, you’ll actively design and produce ambitious data visualizations—ranging from rapid-turn charts embedded in breaking news to immersive visual explainers and interactive features. You’ll collaborate closely with reporters and editors to identify data-driven opportunities, ensuring visual storytelling is embedded across daily coverage and marquee projects. The ideal candidate combines journalistic instincts, strong design sensibility, and technical fluency in current visualization tools and web technologies. Responsibilities: • Identify opportunities to elevate CNBC journalism through visual storytelling by collaborating closely with reporters, editors, product and engineering teams, • Build and manage a team of data visualization journalists, • Translate complex datasets into clear, engaging visuals for a broad audience, • Lead efforts for real-time or dynamic visualizations (markets, policy, economic data), • Work with the digital managers to establish standards for chart design and editorial integrity, • Establish workflows for quick-turn charts and graphics in daily coverage, • Build a library of reusable visual templates and components, • Build interactive visual explainers using scroll-based storytelling, animations, and multimedia elements, • Develop dynamic visualizations for breaking news, enterprise stories, and special projects At CNBC Headquarters in Englewood Cliffs, NJ, you’ll have access to great perks and amenities: • Sweat it out -- Free onsite fitness center with state-of-the-art equipment, plus daily group classes, • Eat up -- Gourmet cafeteria with daily specials plus soup and salad bars, • Extras -- Dry cleaning, shoe shining and sneak peeks Don’t have a car? No problem! We offer free shuttle transportation to and from multiple locations in Manhattan, Brooklyn, Hoboken and Jersey City This position is eligible for company sponsored benefits, including medical, dental and vision insurance, 401(k), paid leave, and a variety of other discounts and perks. Salary range: $125,000-$145,000. Additional Requirements: Interested candidates must submit a resume/CV through careers.versantmedia.com to be considered. Must have unrestricted work authorization to work in the United States. Qualifications Required Qualifications: • 7+years creating data visualization, information graphics or visual journalism for a news publication, including 3 years of experience leading a team, • A strong portfolio of visual storytelling and interactive projects, • Mastery in tools such as Datawrapper, Flourish, Tableau, Illustrator, Figma or D3-based tools., • Proven experience building interactive graphics or web experiences using HTML, CSS and JavaScript, including visualization frameworks such as Svelte and D3.js., • Deep understanding of data analysis and storytelling with data, • Strong news judgment and storytelling instincts, • Ability to translate complex topics into accessible visual explanations, • Interest in business, economics, markets, technology or policy reporting Desired Characteristics: • Deep interest in business news and financial markets, • Experience covering breaking news in competitive environments, • Ability to work a flexible schedule to meet deadlines Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to candidateaccessibility@versantmedia.com. VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Senior Financial Data Analyst partners with the Director of Finance, Senior Leaders, and Finance Team to assist with automating processes and reporting, Collaborates closely with Operation Leaders to support strategic initiatives and decision-making, create financial models to provide insights to business operations, analyze and resolve data issues within the newly implemented systems, ensuring smooth operations, develop and maintain insightful financial dashboards and reports using advanced business intelligence tools and apply data mining techniques and visualization tools to support strategic planning, cost transparency, and operational efficiency. Primary Duties/Responsibilities: • The NJ Regulated finance team delivers operational support and education to a 500+ employee organization that delivers continuous clean drinking water for over 1 million customers within NJ. This role provides a dynamic learning environment to understand regulatory, customer, operational, and financial needs. In this role, you will directly work with operations leaders with the Finance Team. This collaborative team effort covers the core topics of FP&A, regulatory reporting, financial/AP controls, and operational KPIs. This stable team is highly motivated and empowered for new ideas and improvements; while also highly encouraging cross function education. As an employee you will find a balance between routine, self-led projects, and accessible leadership. Beyond a curious mind and strong financial data skills, a successful candidate will have a high desire to learn the operations, tinker and improve, challenge and execute., • Deliver FP&A support to Director of Finance, Manager, and Finance Team:, • Collaborate with monthly reporting, variance analysis, budget, and forecast deliverables., • Support month end close processes including accruals, AP, inventory, and reclasses., • Update annual allocations, capitalization, regulatory reports, and financial contractual obligations., • Leverage tools to provide a high level of data proficiency and analytical skills:, • Query, scrub, and manage data to provide transparency and insights., • Redevelop and automate existing reporting., • Monitor and create controls to drive the financial performance, accounting rules, state/federal regulatory compliance, and contractual agreements., • Strategic member for monthly Key Performance Indicators Leadership Review (partner in development, presentations, and strategy).Qualifications Education/Experience/Background: • Bachelor degree in Finance, Economics, Statistics, Engineering, a related field, or equivalent practical experience., • MBA preferred., • 3-5 years of progressive experience in Finance, Accounting, and/or Data., • Significant achievements in analyzing complex financial issues., • KPI or data science experience. Knowledge/Skills/Abilities: • Mastery of Excel and Google (or equivalent business intelligence data tools)., • Desire to learn about the Water Industry., • Strong analytical and problem-solving skills that translate to operational effectiveness., • High sense of urgency and ability to deliver on tasks and projects. Ability to identify creative solutions and to individually execute as a sole contributor., • Highly proficient with Google, Microsoft Office Suite, or equivalent system., • Highly effective management of data, data scrubbing, and data visualization (SQL/Power Query/Looker/ basics preferred)., • Integrity, reliability and autonomy., • Peoplesoft, Hyperion, Perspectives, Workday, SmartView knowledge are highly desirable., • Interpersonal skills with ability to interact with all levels of management. Additional Information Pay Range: $80000 to $90000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Senior Safety Manager leads health, safety, and security programs across the New Jersey Division, protecting employees, visitors, and contractors while ensuring compliance with Veolia HSS standards and all applicable regulations. This role provides strategic leadership for division-wide HSS initiatives and directly manages one HSS professional. Oversees risk assessments, audit programs, training initiatives, incident investigations, and injury case management across multiple facilities. Partners with Division and Business Unit leadership to implement behavioral-based safety programs, drive safety culture improvement, and provide senior-level HSS expertise for operations and new business pursuits. Develops predictive analytics to identify critical risks and implements preventative strategies. Serves as the primary HSS authority for the New Jersey Division, requiring regular field presence to provide operational support, oversight, coaching, and strategic direction while developing HSS team capabilities. Primary Duties/Responsibilities: • Develops, implements, and manages comprehensive HSS policies, procedures, and program elements across the New Jersey Division to drive safety culture transformation and behavioral excellence in alignment with Veolia Standards., • Leads the New Jersey Division HSS leadership team in developing corporate HSS standards, strategic planning, budget development, and goal setting; provides executive-level mentorship to HSS professionals and Project Safety Coordinators while serving as primary liaison between Division Operations and corporate HSS management., • Directs the development of division-wide HSS training resources and oversees field coaching programs; manages one HSS professional to ensure consistent delivery and effectiveness across all locations., • Oversees division-level risk assessments and develops comprehensive HSS risk reduction strategies to systematically reduce injuries and incidents across multiple facilities and operations., • Manages HSS audit programs and worksite inspection protocols across the New Jersey Division; serves as senior subject matter expert in HSS disciplines (OSHA regulations, LOTO, JSA, Confined Space, PSM/RMP) and provides technical guidance to operations leadership., • Oversees division-wide HSS training compliance, monitors training effectiveness metrics, and ensures regulatory compliance across all New Jersey Division facilities through direct management of HSS staff and training initiatives., • Directs incident investigation processes for injuries, vehicle incidents, and significant events across the division; ensures thorough root cause analysis, prepares executive-level investigation reports, and coordinates with workers' compensation coordinators and legal counsel., • Leads effective case management strategies for employee injuries across the division and manages workers' compensation claims to optimize outcomes and control costs., • Designs and implements division-wide behavioral-based safety programs customized to diverse operational environments and specific site needs., • Establishes and maintains division-level HSS data management systems, analyzes trends across multiple facilities, reviews consolidated OSHA logs, and delivers strategic HSS performance reports to senior operational management., • Provides HSS consultation to Engineering and Operations departments for capital projects and operational changes across the New Jersey Division., • Leads project management for strategic HSS initiatives across the division, including resource allocation, timeline management, and stakeholder coordination. Work Environment: • Office environment with daily exposure to water and/or wastewater plant environment (exposure to chemicals and moving equipment), field visits with crews working on highway settings (traffic exposure), exposure to outside weather conditions (winter - summer)., • The noise level around heavy equipment and plant environments varies (hearing protection may be required).Qualifications Education/Experience/Background: • Bachelor of Science Degree in Safety, Environmental Engineering, or equivalent., • 7+ years of related experience in HSS compliance., • Work experience in the construction industry. Knowledge/Skills/Abilities: • Strong organizational, oral, written and interpersonal skills., • Strong writing, coaching, and teaching skills., • Ability to balance changing and potentially conflicting priorities., • Ability to self-organize, prioritize and drive own work schedule., • Ability to interact with all levels within the BU., • Proficient knowledge of Google programs including Sheets, Docs, Gmail and Slides., • Maintain specialized knowledge of safety regulations and industry consensus safety guidelines., • Willing and able to work in the field with field staff evaluating, coaching and supporting safety, health, and security extensively., • Must be available (24/7) to respond to & assist with HSS incidents or emergencies., • Willing to work extended work schedules (as needed). Required Certification/Licenses/Training: • Must possess a valid driver's license., • Desired, but not required, certifications include:, • Authorization by the OSHA Training Institute as an authorized instructor on OSHA Standards for general industry., • CSP (Certified Safety Professional), or ability to acquire CSP designation., • CHMM (Certified Hazardous Materials Manager) is a plus., • Certifications issued by AWWA and other recognized industrial safety organizations on topics relevant to conducting specific safety training courses and responding to hazardous materials handling operations and chemical spill/release incidents. Physical Requirements: • Ability to wear all applicable Personal Protective Equipment. Additional Information Pay Range: $130,000 to $135,000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 15% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Job Title: Pre-construction Manager Department: Pre-construction / Estimating Reports To: Director of Operations / General Manager Position Summary The Pre-construction Manager is responsible for leading and managing all pre-construction and estimating activities for a commercial landscape construction and installation company. This role oversees the estimating team, ensures the accuracy and completeness of project bids, and collaborates with Business Development and Operations to identify, pursue, and secure profitable work. The Pre-construction Manager plays a critical role in project selection, cost strategy, and maintaining a high win rate while ensuring alignment with company capabilities and resources. Key Responsibilities Pre-construction & Estimating Oversight • Manage the full pre-construction process from bid solicitation through proposal submission, • Review project plans, specifications, and bid documents to ensure complete scope coverage, • Oversee quantity takeoffs, cost estimates, and proposal preparation, • Ensure all estimates are accurate, competitive, and submitted on time, • Establish and maintain production rates, labor assumptions, and cost databases Team Leadership • Supervise, mentor, and develop estimating staff (3.5 estimators), • Assign bid opportunities and manage workload across the team, • Set expectations for quality, accuracy, and timeliness, • Provide training and support to improve team performance Bid Strategy & Project Selection • Evaluate bid opportunities based on project fit, location, risk, and profitability, • Collaborate with Business Development to prioritize target clients and projects, • Analyze General Contractor relationships and historical performance, • Develop strategies to improve bid success rate and margins Client & Stakeholder Coordination • Attend pre-bid meetings, site visits, and scope review meetings, • Coordinate with General Contractors, subcontractors, and vendors, • Clarify scope requirements and respond to RFIs during the bidding process Cross-Functional Collaboration • Work closely with Operations to ensure estimates align with field execution, • Support project handoff to operations teams upon award, • Assist in value engineering and cost-saving recommendations Process & Systems Management • Utilize estimating and project management software to track bids and performance, • Maintain organized records of bids, costs, and historical data, • Continuously improve estimating processes, tools, and workflows Follow-Up & Performance Tracking • Ensure vendor and subcontractor pricing is obtained and validated, • Track bid results, analyze wins/losses, and adjust strategies accordingly, • Monitor estimating KPIs including hit rate, margin accuracy, and turnaround time Qualifications • Bachelor's degree in Construction Management, Landscape Architecture, Horticulture, or related field (preferred), • 8+ years of experience in estimating or pre-construction within commercial landscape construction or construction industry, • Proven experience managing estimating teams or leading pre-construction efforts, • Strong understanding of construction methods, materials, and labor production rates, • Experience working with General Contractors and bid-build environments Skills & Competencies • Strong analytical and problem-solving skills, • High attention to detail and accuracy, • Effective leadership and team development abilities, • Excellent communication and interpersonal skills, • Ability to manage multiple bids and deadlines simultaneously, • Proficiency in estimating software and project management tools Work Environment • Primarily office-based with occasional site visits and pre-bid meetings, • Fast-paced environment with multiple concurrent deadlines Physical Requirements • Ability to travel to job sites as needed, • Ability to review plans, drawings, and construction documents Compensation & Benefits • Competitive salary based on experience ($130-150k base target), • Performance-based incentives or bonus potential, • Health, dental, and vision insurance, • Paid time off and holidays, • 401k plus matching If you are qualified and interested in this opportunity, please respond to this job posting an include a copy of your resume. We will review it and be in touch to discuss this further.

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job Description Lead Platform Engineer For B2B Marketplace (AI-Native Workflow) Company: BRDJ Role: Full-Time, High-Autonomy Who We Are BRDJ is a full-stack B2B procurement marketplace structurally replacing the legacy institutional supply chain. We are not just a software layer. We operate the digital marketplace that connects nursing homes directly to manufacturer floor pricing, and we own the physical distribution network that delivers the goods. We just completed our 0-to-1 MVP build and have 25 facilities live and transacting on the platform. The Engineering Reality Our MVP Technical Lead built a hardened, enterprise-grade cloud architecture at lightning speed because he didn't write every line of code by hand. This platform was architected using heavy agentic workflows (Claude Code, Cursor, etc.). We are not looking for a traditional "typist" developer who spends four hours writing boilerplate. We are looking for an AI-Native Platform Engineer to take over the solo keys to this machine. You are a systems thinker and a conductor. You will leverage AI agents to generate code, while your actual job is Systems Architecture, Code Review, and Deployment Safety. The Tech Stack (What You Are Taking Over) This is a highly modern, distributed, zero-fail environment. • Infrastructure: 100% AWS Serverless, natively managed via SST v3 (Ion) in TypeScript., • Backend: Node.js 20, Apollo Server 4 (GraphQL)., • Database ORM: PostgreSQL 15, Prisma ORM, ElastiCache Redis 7.1, OpenSearch 2.11., • Transaction Engine: Asynchronous Event-Driven Outbox Pattern utilizing AWS SQS Queues and Dead-Letter Queues (DLQs) for absolute payment safety., • Frontend: Next.js 15 (App Router), React 19, Tailwind CSS 4 in a Turborepo monorepo., • External Integrations: Stripe Connect (routing/splits), Zebra WMS native scanner sync, Sentry (observability). The Day-to-Day Operation As the solo operator of the post-MVP ecosystem, you will not have a product manager handing you 40-page briefs. You will work directly with the COO and CEO to translate physical logistics (like Universal Parent Description taxonomies and warehouse bin locations) into digital infrastructure. Your core workflow will look like this: Agentic Feature Building: You will execute our final feature modules (Stripe Connect splits, native WMS-lite) by directing AI agents, reviewing the output against our strict business logic, and executing zero-downtime database migrations via Prisma. Surgical Triage (On-Call): When a production bug hits, you don't panic. You pull the stack trace directly from Sentry, feed it into your AI IDE environment, identify the exact failing resolver, review the AI-generated patch for structural safety, and push the SST deployment in 15 minutes. Architectural Guardrails: An AI can write a React component, but it cannot independently architect an SQS Dead-Letter Queue redrive script. You are the human filter that ensures idempotency, data integrity, and strict serverless boundaries. The Required DNA (Non-Negotiable) You are AI-Native: You treat AI as a co-founder. You are completely fluent in prompting, context-loading, and reviewing code from agentic tools. You are a Database Custodian: You treat live production data as holy text. You have deep experience with Prisma, PostgreSQL, and executing zero-downtime schema migrations on live systems. You are Cloud-Fluent: You don't need a DevOps guy. You can read, modify, and scale resources natively inside an sst.config.ts file. You think in Systems, not just Screens: You care deeply about how order-splitting logic affects physical warehouse pick-paths and how asynchronous queues prevent double-charging.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description Description Work Location: Leonia NJ Work Schedule: 1st shift / M-F Main Purpose of the Job: Under the direction of the Supervisor Quality Lab Services Manager Quality Lab Services the Laboratory Technician Quality Services is responsible for performing routine laboratory support functions cleaning of glassware and general housekeeping. Non-routine duties are performed in a learning capacity under direct supervision. Responsibilities are focused on less complex testing and support functions. Key Outputs / Deliverables - Perform qualitative analysis of samples. - Conduct routine and laboratory support functions such as collecting samples preparation of media reagents and standard solutions stocking and distributing supplies and equipment and collecting washing and storing glassware. As required maintains related notes and records. - Records data performs calculations analyzes reports and authorizes results. Performs peer review of data and provides critical analysis of laboratory systems. Keeps management apprised of progress. - Prioritizes workload and meets scheduled timelines. - Informs Supervisor of equipment and supply needs required to avoid delays in testing. - Reports results of assignments and maintains and performs related record keeping in compliance with approved regulatory policies and standards to meet quality and accuracy requirements. - Follows and complies with all appropriate SOPs QPs GMPs and safety and health requirements as applicable. - Demonstrate good housekeeping practices to minimize analytical mix-ups potential laboratory contamination and safety hazards. Understanding and handling of hazardous materials and waste using proper and safe techniques. - Assists higher level technical and scientific personnel as needed to learn more advanced techniques equipment instrumentation and procedures specific to the Quality Control Department. - Display ability in interpreting and evaluating atypical/OOS results and immediately report them to Supervisor. - Show versatility and be able to work as a part of a team when required. - Other duties as assigned Expected high performance behaviors: - Exhibit positive attitude regarding work and responsibilities - Ability to work collaboratively within teams - Ability to focus on details - Ability to maintain effectiveness during major changes in work tasks or the work environment adjusting effectively to within new work structures processes requirements or cultures Qualifications / Certifications - High School diploma or general education degree GED required. - Bachelors degree in chemistry or other closely related discipline preferred. - 0 to 1 years of laboratory experience. Critical Experiences - Ability to learn analytical skills. - Good time management skills and have the ability to meet deadlines. - Must be willing to meet tight deadlines and work overtime if required. - Ability to write simple correspondence and have good verbal communication skills. - Basic mathematical skills. - Good computer skills i.e. MS Word Excel. - Must be able to organize generated data evaluate and interpret the results when compared to specifications. Working Conditions - While performing the duties of this job the employee is regularly required to walk talk and hear. - The employee frequently is required to stand. - The employee may be required tosit for periods of time reach with hands and arms. - The employee must regularly lift and/or move up to 10 pounds frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. - Specific vision abilities required by this job include close vision distance vision color vision peripheral vision depth perception and the ability to adjust focus. - Use of a standard computer keyboard for data entry. Work environment may be exposed to powders chemicals and allergens peanuts tree nuts milk dairy eggs wheat gluten soy fish and shellfish Experience Level Entry Level Job Type & Location This is a Contract position based out of Leonia, NJ. Pay and Benefits The pay range for this position is $17.00 - $17.50/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Leonia,NJ. Application Deadline This position is anticipated to close on Jun 19, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionPosition Description: Summary/Objective Architectural Project Manager is responsible for all phases of design and construction of projects from beginning to completion, while performing a supervisory role in assigning and reviewing the work of other team members \tAbility to handle multiple projects or one account with diligence and commitment. \tReview and develop construction plans requested by the client \tOversee the work done by assistant project manager and draftsperson \tOversees drafting, review shop drawings and respond to RFIs \tAnalyze and estimate project cost for labor, equipment, and material \tMonitor progress of all construction phases in compliance with building plans and deadlines \tManage correspondence with clients, vendors, consultants, building departments, landlords, construction team and other personnel involved in projects \tReview and research state and local code compliances \tPrepare reports and presentations for client meetings \tExecute site surveys on a need basis \tManage people on the team and their expectations and review and approve timecards of the team in a timely manner \tPerform miscellaneous tasks as assigned by the Senior Project Manager/Studio Director/Director of Operations Qualifications \tBachelors Degree or higher in Architecture or related field \tMinimum 6 years of experience as a Project Manager in an architectural firm \tMinimum 4 years of experience in Retail Architecture required \tAbility to interpret construction data, engineering calculations and drawings \tProficiency in AutoCAD with strong 3D design skills required, with basic knowledge of Revit SketchUp, Photoshop or Illustrator preferred \tProficiency in Microsoft Suite (Word, Excel, PowerPoint) \tExperience drafting retail or commercial construction documents preferred \tMust possess strong time management and people management skills and the ability to handle the pressure of tight deadlines \tMust be able to travel on need basis click link to submit resume: https://bit.ly/4lKnqrb $70,000.00 - $90,000.00 Annually

Job DescriptionCompany Description VERSANT is a leading force in news, sports and entertainment - home to iconic and trusted brands that inspire, inform, and delight audiences. Our unique combination of content, technology and services enriches the cultural fabric, igniting passions, sparking conversations, and connecting people to what they love most. As an independent, publicly traded company, VERSANT brings together powerhouse cable networks - including USA Network, CNBC, MS NOW (formerly MSNBC), Oxygen, E!, SYFY, and Golf Channel - with dynamic digital and direct-to-consumer brands such as Fandango, Rotten Tomatoes, GolfNow, GolfPass, and SportsEngine. Together, these businesses reflect our commitment to delivering exceptional experiences across every screen and service. VERSANT is an industry-changing media company fueled by innovation and an entrepreneurial spirit. With a strong foundation and a forward-looking vision, VERSANT empowers creativity, embraces change, and drives connection in an ever-evolving world. Job Description We are seeking a versatile, highly skilled, and leadership-oriented Manager, Graphics Playout with significant experience in live news coverage to join our team. This role oversees the real-time delivery of on-air graphics, ensuring accuracy, timeliness, and visual consistency across all news broadcasts. The Manager will lead a 24/7 graphics playout team supporting live and pre-produced programming, breaking news, and special events. This position requires strong leadership, deep technical expertise in broadcast graphics systems, and the ability to thrive in high-pressure, fast-paced live production environments. Key Responsibilities Team Leadership & Strategy • Lead, supervise, and develop a 24/7 graphics playout team, including overnights, weekends, and holidays, in multiple locations including Manhattan, NY and Englewood Cliffs, NJ., • Provide expert technical and editorial support to on-air and off-air productions., • Serve as the primary liaison between Engineering, Show Teams, Real-Time Graphics, Editorial, and other production groups., • Lead and manage a team comprising both union-represented and non-union employees and freelancers, ensuring compliance with applicable collective bargaining agreements while maintaining consistent performance standards., • Drive collaboration across departments to support maintenance, testing, and implementation of new and existing technologies and workflows., • Foster a culture of accountability, efficiency, and continuous improvement., • Train and mentor staff on best practices, newsroom workflows, and system enhancements. Live Graphics Operations • Oversee the execution of full-screen graphics, lower thirds, and other visual elements during live and recorded broadcasts., • Operate and manage playout systems (e.g., Vizrt Trio and other industry-standard platforms)., • Coordinate closely with editorial and production teams to align graphics with scripts, rundowns, and breaking news updates., • Collaborate with designers to deploy urgent and breaking news graphics in real time., • Ensure brand consistency, editorial accuracy, and high production standards across all visual elements. Technical Oversight & Troubleshooting • Understanding of control room workflows such as routing, engine inputs, and multiview layouts, • Troubleshoot and resolve technical issues quickly to minimize on-air disruptions., • Maintain quality control standards for design integrity, data accuracy, and system reliability., • Support testing and rollout of new graphics systems, workflows, and display technologies., • Ensure proper scheduling and staffing coverage for all broadcasts and special events. Performance Indicators • Accuracy and timeliness of on-air graphics execution., • Minimal technical or operational errors during live broadcasts., • Team productivity, efficiency, and adherence to brand standards., • Successful support of breaking news and high-profile live events., • Effective cross-functional collaboration and workflow optimization.Qualifications Required Experience • 5+ years of experience in graphics playout within a live broadcast environment., • Minimum 3 years of experience focused on news programming., • At least 1 year of leadership, supervisory, or mentorship experience., • Proven experience working in live studio and control room environments. Technical Expertise • Proficiency with industry-standard graphics systems (Vizrt, Ross, Chyron, etc.)., • Strong experience with Vizrt platforms (including Vizrt Trio)., • Experience with newsroom systems such as iNews and other broadcast workflows., • Familiarity with professional studio and control room equipment., • Understanding of large-scale display technologies (LED video walls, projection mapping). Core Competencies • Exceptional troubleshooting and problem-solving skills under live production pressure., • Ability to think quickly, communicate clearly, and keep pace with fast-moving productions., • Strong leadership and client-service mindset., • Excellent interpersonal and cross-functional collaboration skills., • Ability to manage multiple priorities simultaneously in a fast-paced, team-oriented environment., • Skilled at explaining complex technical concepts to non-technical stakeholders. Preferred Qualifications • Experience working across multiple news program formats and styles., • Advanced experience implementing new graphics technologies and workflows., • Demonstrated success leading high-performing teams in 24/7 operations. This role is bonus eligible. Additional Information As part of our selection process, external candidates may be required to attend an in-person interview with a VERSANT Media employee at one of our locations prior to a hiring decision. VERSANT Media's policy is to provide equal employment opportunities to all applicants and employees without regard to race, color, religion, creed, gender, gender identity or expression, age, national origin or ancestry, citizenship, disability, sexual orientation, marital status, pregnancy, veteran status, membership in the uniformed services, genetic information, or any other basis protected by applicable law. If you are a qualified individual with a disability or a disabled veteran and require support throughout the application and/or recruitment process as a result of your disability, you have the right to request a reasonable accommodation. You can submit your request to candidateaccessibility@versantmedia.com. VERSANT Media is committed to fair and equitable compensation practices. We include a good faith pay range for each position to comply with applicable state and local pay transparency laws and to promote equity across our organization. Actual compensation will be based on factors such as the candidate's skills, qualifications, experience, and location and may include additional forms of compensation and benefits such as health insurance, retirement plans, paid time off, etc. VERSANT Media is not accepting unsolicited assistance from search firms for this employment opportunity. All resumes submitted by search firms to any employee at VERSANT via-email, the Internet, or in any form and/or method without a valid written Statement of Work in place for this position from VERSANT's Talent Acquisition team will be deemed the sole property of VERSANT. No fee will be paid in the event the candidate is hired by VERSANT as a result of the referral or through other means.

We're currently looking for individuals across the country to take part in remote paid research, including remote focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing your opi

Receptionist/Administrative Assistant.Are you a highly skilled and motivated individual looking for a dynamic work environment? Do you thrive in a fast-paced setting where organization and efficiency are key?.We are seeking an enthusiastic Receptionist/Administrative Assistant to join our team.In th

Key responsibilities include:/pulliServing as the primary point of contact at the front desk, greeting visitors and answering incoming phone calls in a courteous and efficient manner/liliManaging daily student attendance, including recording absences, late arrivals, and early dismissals, and communi

Administrative Assistant Property and Asset.The Administrative Assistant position provides general office support to the Property Management and Asset Management Departments.The primary responsibility is to perform all administrative duties and provide additional support with special projects as ne

TechServe Alliance Excellence Award- IT and Engineering Staffing & Solutions.

Compile data for training improvements and reporting. Message and data rates may apply. AI is used solely to gather data and does not replace human-based decision-making in employment decisions.

Works closely with Project Managers. Compiles technical, financial, and other project data using various sources for inclusion in reports, studies, or presentation materials.

The office administrator should assure provision of office functions such as: patient scheduling, reception duties, medical record preparation, clinic statistics and report compilation, data collection and dissemination, regarding but not limited to, patient demographics and third-party payers, and

We are excited to invite a passionate and detail-oriented Administrative Assistant to join our team! Homes for the Homeless (HFH) is searching for an experienced Administrative Assistant for our Families w/ Children facility located in the Longwood area of the Bronx, NY.As the Administrative Assista

Coordinate the activities of various support staff to ensure adequate staffing for answering phones, entering data, copying and mailing of documents, etc. Maintain data sheets, training logs, office certificates, etc.

Support the Business Manager with processing HR employment, volunteer documents, creating labor schedules, and allocating salaries to the appropriate departments. Knowledge of AS400 Database Management is a plus.

Conduct research, compile data, and prepare reports for consideration and presentation by leadership. Perform general office duties such as ordering supplies, maintaining records management database systems.

Database management including but not limited to data entry into Excel and Electronic Health Records (EHR) systems.