Trabajos design & construction en Newark, New Jersey - Page 11Crear alertas

Job Description Works-in-Progress Associates (WPA) is currently seeking a Junior Inspector to join our team! The project involves Design-Build activities to develop, furnish, commission, and install a Laser Intrusion Detection System (LIDS) at 13 under river tube portals and 28 stations in Manhattan, Brooklyn, Bronx, and Queens. The candidate must be flexible regarding work schedule and open to working nights and weekends. Scope of the Work: • Installation laser scanner for the LIDS in the Project’s thirteen (13) under river tubes and twenty-eight (28) stations at both portals and emergency exit shafts at the track level access point. Removal of existing motion detectors and sensors that the laser scanner portion of the LIDS will replace as intrusion detection. Installation of tamper-resistant card readers and internet protocol (IP) intercoms at all approaches outside of the laser scanner’s detection area, to allow MTA employees access without triggering LIDS’s alarm., • Removal of existing analog cameras at some Work Sites to be replaced with IP-cameras, to be connected to new/or existing Network Panels., • Upgrade/replace Access Control Panels (ACP) and Fiber Distribution Panels (FDP), with panels located in the tubes, emergency exit shafts, and at the End of Platform at the twenty-nine (29) stations. The ACP – both new and upgraded – will include equipment for the new LIDS and tamper resistant switches on enclosures and cyber locks. At certain locations, Access Control/Fiber Distribution Panel may be combined in place of 2 separate panels. If difficult to access, panels to be relocated to a maintainable location., • Baccalaureate Degree in engineering/architecture and/or construction related field from an accredited college or university, • 3 years of full-time experience as an inspector in the construction industry, • Background in Electrical Engineering is required., • MTA Track Training Card and PMG123 are required., • OSHA 30 certification is required, • Must be available to work occasional nights and weekends as needed, • A driver's license valid in New York State., • Perform daily inspections to verify that the work is being completed in accordance with the requirements of the Construction Contract Documents., • Prepare Daily Inspection Reports showing the Contractor’s labor force, the location of the construction activities, equipment used, and the actual work being performed. Reject work that does not conform to the requirements of the Construction Contract Document and immediately provide written notification to the MTA C&D Construction Manager and the Contractor of such rejection. Provide updates to the monthly Project Status Reports. Daily Inspection Reports shall be uploaded to Asite or other approved e-project software website. Original paper copies of the reports shall be filed in the Project Office as project documentation., • It is anticipated that the work under this contract will be performed during days, nights, and weekends to meet the aggressive schedule., • As a part of the daily inspection services, the inspectors are expected to fully coordinate the work activities of the Contractor forces and the assigned MTA Agency’ forces. This includes coordinating, arranging, and managing the flagging support, access and protection, agency inspection and test witnessing, track outages, work trains and other agency provided equipment and materials, and other related services., • Any issues or problems encountered during the execution of work shall be resolved expeditiously to avoid impacting the project performance. These issues and/or problems, including their resolution, shall be documented and copies of this documentation be provided to MTA C&D PM for further action., • Make immediate reports to MTA C&D PM of any field conditions that deviate from the contract drawings and make recommendations for corrective action., • Ability to build and strengthen long-lasting client relationships by providing reliable service and project solutions., • Ability to communicate clearly and effectively with all management levels. Must have excellent interpersonal, oral, and written communication skills., • Must have strong organizational and time management skills., • Must be able to adapt and prioritize, meeting deadlines, in a fast-paced environment., • Operate with a sense of urgency, quickly responding to clients., • Demonstrated leadership, responsiveness, and accountability., • Detail oriented with strong analytical skills., • Proactive and take initiative. Company DescriptionWPA is a woman-owned Owner's Representative firm and we manage construction projects for mostly nonprofits including schools, hospitals, libraries, etc. in the New York City area. We have been in business for over 30 years and have completed well over 500 projects. We currently have somewhere between 50-60 employees. Because we are a woman-owned firm we are on contracts with larger Construction Management firms such as LiRo, Hill International, Jacobs, Tectonic, Gilbane, etc. and we help them to meet their WBE goals. We provide Project Managers, Inspectors, Estimators, Office Engineers and so on. Currently we are on about 10-15 different contracts.WPA is a woman-owned Owner's Representative firm and we manage construction projects for mostly nonprofits including schools, hospitals, libraries, etc. in the New York City area. We have been in business for over 30 years and have completed well over 500 projects. We currently have somewhere between 50-60 employees.\r\n\r\nBecause we are a woman-owned firm we are on contracts with larger Construction Management firms such as LiRo, Hill International, Jacobs, Tectonic, Gilbane, etc. and we help them to meet their WBE goals. We provide Project Managers, Inspectors, Estimators, Office Engineers and so on. Currently we are on about 10-15 different contracts.

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. The Senior Inspector will play a key role in overseeing the quality, safety, and compliance of electrical and/or mechanical systems on major infrastructure and transportation projects. This role ensures that all construction activities meet contract specifications, applicable codes, industry standards, and project requirements. The Senior Inspector works closely with contractors, engineers, project managers, and regulatory authorities to ensure successful project execution and timely resolution of technical issues. Responsibilities • Monitors contractor operations and verifying conformance with project plans and specifications for electrical or mechanical components of the project, • Serves as the on-site inspector for construction work performed by the contractor and subcontractors., • Interacts with the construction contractor’s site supervision on field activities to ensure compliance with the construction contract requirements, • Prepares daily reports, correspondence, change orders, periodic payment estimates, and quantity computations, • Observes details of work performed by others, documenting results; obtaining photographic documentation of work performed, • Confirms compliance with technical documents and industry-specific standards and codes, • Reviews and downloads field data into laptop computer and transfer to company server, • Discusses projects with project team on a daily basis, • Makes accurate judgment-calls on a variety of construction field activities, • Performs other like duties, as assigned Qualifications • Bachelor’s degree in Mechanical or Electrical engineering required, • 5+ years of experience in Mechanical or Electrical inspection, • Experience with Transportation/Infrastructure projects required, • Experience working with public agencies (i.e., Amtrak, MTA, Metro North, LIRR), • OSHA 30-hour safety course is required, • MTA Track Safety Certification is a plus, • Experience with Project Management tools (i.e., Procore, Asite), • Excellent written and verbal communication skills, • Good time-management skills, • Ability to perform under pressure, • Good skills in Microsoft Excel, Word and Powerpoint, • A strong attention to detail is necessary. BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionSenior Electrical Engineer - New York, NY Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc., to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Construction Inspector Reports to: Resident Engineer General Qualities: • Demonstrate the ability to effectively carry out assigned tasks with meticulous attention to detail and accuracy., • Proactive self-starter capable of setting a positive example for the staff., • Has full technical and administrative responsibility for interpreting, organizing, executing, and coordinating projects/assignments., • Possess strong supervisory and technical skills; effective time-management skills; strong computer skills; strong mathematical skills including algebra, geometry, and trigonometry; excellent verbal, written, and interpersonal communication skills; able to mentor staff in functional areas of technical construction inspection activities., • Manages a major complex project and/or several routines/less complex projects. Technical Responsibilities: • Review daily field inspections, maintain inspection reports, and prepare progress reports., • Prepare, review, and negotiate monthly payment quantities., • Verify that construction activities comply according to contracts and specifications., • Interact and communicate project information with clients and project staff to clearly explain project staff to clearly explain project details for interpretation of plans and specifications., • Perform quantity and engineering computations, as well as understand plans and specifications., • Comprehend required inspection codes and requirements to carry out testing., • Excellent communication skills, strong time management and, task prioritization abilities., • Ensures compliance with plans, codes, and safety standards by inspecting., • Proficient in software required to complete assigned projects., • Baccalaureate degree from an accredited college and Minimum of (3) three years of experience in construction inspection or management of infrastructure construction projects (highway/sewer/water), preferred NYCDDC experience. Professional Licenses/Registrations: • Preferred NYCDDC current Water Main and ACI-1 Inspection Certificate., • Qualified for ASCE Grade II, or NICET Grade III Professional Development: • Actively participates in professional societies, industry organizations, and local civic organizations., • Encourages the staff to participate in professional societies, industry organizations and local civic organizations., • Encourages professional training and development and licensing (self and staff). Physical Requirements: ·This position requires physical ability to perform field inspections · Ability to work in diverse weather conditions · Extended periods of standing and walking possibly on uneven or challenging terrains · Climbing, bending, kneeling · Working long hours • Lift and carry up to 25 lbs. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Associate Director, Architecture New York, NY | Hybrid| Full-Time About Us Shape the iconic skyline of New York! Join HLZAE, a wholly owned subsidiary of Milrose Consultants. We build more than buildings—we build confidence in compliance, restoration, and renewal. As a trusted leader in architecture, building envelope consulting, and façade restoration, we partner with clients to preserve and enhance New York City’s iconic skyline. Our team brings deep technical expertise and a commitment to excellence across every phase of design, inspection, and construction administration. Position Overview We’re looking for an Associate Director, Architecture to join our studio team. In this role, you’ll lead project management efforts and oversee a team of Project Managers and Associates. You’ll ensure quality, profitability, and timely delivery across projects while mentoring staff and supporting their professional development. What You’ll Do • Lead and manage a team of Project Managers and Associates., • Promote teamwork and coordinate job assignments for optimal utilization., • Review project budgets, timelines, and deliverables., • Monitor project phases, budgets, and accounts receivable., • Perform quality assurance and involve specialists as needed., • Act as Senior Project Manager for assigned projects, • Mentor and coach team members; support career development., • Provide technical development of various project types; facade restoration, exterior rehabilitation, window/fenestration replacement, historic preservation, forensic investigation and interior alterations, etc., • Report on staffing needs and workload to Studio Director., • Assist in recruitment, onboarding, and business development., • Champion HLZAE’s mission, vision, and core values. What You’ll Bring Required: • 10+ years of experience in architecture, engineering, or related field., • Bachelor’s degree in Architecture, Engineering, or equivalent experience., • Proficiency in project management tools and software. Adaptable to changing technology., • Strong leadership, communication, and collaboration skills., • Knowledgeable of NYC Building Codes. Preferred: • Experience with façade restoration and building envelope consulting., • Certified QEWI (Qualified Exterior Wall Inspector), • Professional certifications or licenses (e.g., RA, PE)., • Work at heights – support and suspended scaffolding. Work Environment & Schedule • This position is based in New York, NY, with a hybrid work schedule., • Standard working hours are Monday through Friday, 9:00 AM to 5:00 PM., • Travel requirements: To local job sites as required. Compensation & Benefits • Salary range: $150,000 – $165,000, based on knowledge, skills, and experience., • Comprehensive health, dental, and vision insurance, and 401K plan with a match., • Paid time off: Holiday, vacation, sick time, personal and birthday., • Career development and growth opportunities. HLZAE, Inc., a wholly owned subsidiary of Milrose Consultants, LLC, is an Equal Opportunity Employer. We are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by law. HLZAE, Inc., a wholly owned subsidiary of Milrose Consultants, LLC, is committed to providing reasonable accommodation for qualified individuals with disabilities. If you need assistance or an accommodation due to a disability, please contact us at . Notice to third party agencies: Please refrain from calling or emailing our team directly. Our in-house Talent Acquisition team manages all recruiting operations, including the selection and management of all external suppliers.

Job Description NECD is seeking an ASSISTANT PROJECT MANAGER NECD is known known for our ability to provide high end design and construction finishes for elevators in New York City. Our clients are the leading architects and developers in NYC. Our primary construction work includes elevator cabs, doors, entrances, and fixtures. Some noteworthy projects include 50 Hudson Yards, The Spiral, One World Trade Observatory, 425 Park, 30 Rockefeller Plaza. We are seeking a candidate with a degree in Architecture or Engineering to assist our project management team. Working directly with the VP of Design + Project Management, as well as interfacing with our broader company teams- Operations, Engineering, Management, Sales, and Production - the candidate for this position should have the following general qualifications. Requirements: • An Associate’s or Bachelor’s degree or equivalent professional experience in Architecture or Engineering., • Strong communication skills, • Proficiency reading architectural drawings + specifications., • Excellent organization and teamwork skills, with strong attention to detail, • Ability to assist on architectural design related tasks, • Excellence in organizational management, planning, and communication skills., • Computer proficiency in Word, Excel, Outlook, Acrobat., • Proficiency in Adobe Creative Suite, AutoCAD, other graphic/design programs would be a plus. Primary Responsibilities: • Material Sample Submittals and Library tracking, • Assist in tracking drawings + submittal packages, • Learn the basics of Project Management, • Work closely with VP of Design + Project Management team, • Some portion of sales/estimating will be part of this position Job Type: Full-time Salary: 60-70K (commensurate with experience) Required experience: Engineering or Architecture degree or equivalent Job Location: The Brooklyn Navy Yard Family-owned and operated for 97 years, NECD provides excellent employment opportunities for those who are serious about a developing career with growth potential. What makes NECD successful is our strong commitment to both our customers (architects, owners, contractors), as well as our employees. Our staff enjoys working together and consists of a highly collaborative team of experienced and hardworking professionals. Through our commitment to total client satisfaction, NECD is now the premiere elevator cab company in NYC. We offer a collaborative environment that welcomes individual expertise, enthusiasm, and effort. We are an equal opportunity employer and value diversity. All employment is decided on the basis of qualification, merit and business need. Please visit our website to get a sense of our extensive experience, superiority of work, and client base

Job DescriptionPosition Overview CAFCO Group is currently looking for a Construction Inspector to join our team for modernization and rehabilitation project NY City wide. Ideal candidates must possess a minimum of 5 years of experience in the construction industry and demonstrate expertise in working on large public sector projects. Experience in managing construction projects in occupied urban facilities is essential. Successful candidates will play a vital role as part of a diverse team, offering Construction Management services for various City Agencies projects. *Design-build experience preferable. Responsibilities · Provide timely detailed reports on all inspection activities.· Review construction plans and technical specifications for accuracy and code compliance.· Meet with clients to communicate project requirements and coordinate inspection plans.· Identify and resolve any discrepancies between inspection findings and approved documentation.· Ensure high level of attention to detail in all inspection operations.· Perform on-site examination of projects under construction to ensure conformance with NYC building codes and approved plans, with emphasis on architectural, plumbing, HVAC, mechanical, electrical, energy code, and related systems.· Maintain daily communication with project managers and fellow inspectors.· Expertly manage multiple simultaneous projects. Qualifications Must have experience managing construction in occupied facilities in an urban setting, preferably public facilities. · Minimum of 5 years’ experience in construction projects.· Ability to communicate effectively both verbally and in writing with the project teams, consultants, contractors, and stake holders. · Proficient level of knowledge relative to all aspects of construction inspections.· The selected candidate must be authorized to work in the United States. CAFCO Group is currently not sponsoring candidates.· Design-build would be a plus.

Job Description Currently we are looking for Soils Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $30hr - $40/hr Based on Certification & Experience Soils / Geotechnical Inspector Role Overview The Soils / Geotechnical Inspector provides specialized inspection, testing, and verification services for earthwork, foundations, and geotechnical construction activities on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable geotechnical standards. The Soils / Geotechnical Inspector is responsible for verifying that subsurface construction activities, materials, and installations conform to approved geotechnical reports, design documents, specifications, and code requirements. Typical work includes inspection of site preparation, excavation, subgrade preparation, structural fill placement, compaction, foundations, and soil improvement systems. This position requires an active on-site presence during earthwork and foundation activities, including witnessing required testing, verifying compliance with approved procedures, and coordinating closely with contractors, construction managers, testing laboratories, and design professionals. The inspector will proactively identify non-conforming conditions, document deficiencies, issue Non-Conformance Reports (NCRs), and verify corrective actions and re-testing. The Soils / Geotechnical Inspector plays a critical role in ensuring foundation performance, structural stability, constructability alignment, and long-term project durability, particularly on projects involving complex subsurface conditions or deep foundation systems. • Work responsibilities may include but are not limited to the following:, • Inspection of site preparation, excavation, and subgrade conditions, • Observation of structural fill placement, lift thickness, and compaction, • Perform or Witness Field density testing with a Nuclear Moisture Density Gauge, • Review laboratory test results, • Inspection of shallow and deep foundation elements (spread footings, caissons, piles, micro-piles), • Oversight of soil improvement methods (e.g., ground improvement, grouting, compaction methods), • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records. Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • Bachelors Degree in Civil Engineering (accredited institution or equivalent), • ICC Certification Soils Special Inspector, • NICET Level I Geotechnical Certification, • NICET Level II Geotechnical Certification, • NICET Level III Geotechnical Certification In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital ProjectsAs Accenture continues to grow, you may see a variety of new career opportunities, and depending on the role and location you may be directed to apply through Accenture Infrastructure and Capital Projects LLP or one of our other legal entities - Accenture Infrastructure and Capital Projects, LLC or Accenture Infrastructure and Capital Projects Inc., with benefits varying by country and role, so please check with your recruiter for details.HERE’S WHAT YOU’LL DO: • You'll be responsible for planning, coordinating, and supervising commissioning and testing activities for electrical substations, ensuring compliance with technical standards, quality requirements, and safety regulations., • You'll lead multidisciplinary teams during commissioning, providing technical guidance, and resolving on-site issues., • You'll review, validate, and document test procedures and results to ensure alignment with design specifications, regulatory requirements, and company standards., • You'll collaborate closely with contractors, design engineers, operations teams, and clients to support successful project execution., • You'll maintain project timelines, budgets, and safety standards throughout all phases of testing and commissioning., • Flexible: The work location for this role will include a mix of working remotely, onsite at a client or in an Accenture office or center., • With all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs. HERE’S WHAT YOU’LL NEED:, • Must have a BS/BA degree in an engineering discipline from an ABET (or Owner approved equivalent) accredited college/university, and 10 years’ experience in the following areas: Construction, maintenance and testing of electrical equipment, Relay protection and control systems, Start-up and commissioning of electrical equipment and systems, Electrical Field engineering, Arc Flash safety training, Troubleshooting of electrical equipment or systemsBONUS POINTS IF YOU HAVE:, • Bachelor’s degree in electrical engineering or related field, • SCADA and communication systems Specialized advanced training (e.g., PTI. WPI, ECNE PUI, a graduate level engineering degree)., • Professional experience in commissioning and testing of electrical substations, including supervision of construction, commissioning, and energization activities, • Professional knowledge of electrical systems, protection & control, and substation equipment, • Ability to lead and coordinate multidisciplinary teams in the field, • Professional experience with problem-solving and decision-making under project deadlines, • Strong communication and stakeholder management abilities, • Willingness to travel and work on-site across New York StateCompensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Minnesota, California, Colorado, District of Columbia, Maryland, Massachusetts, New York, New Jersey, Ohio or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply.We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy StatementAccenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women.

Job DescriptionWho We Are Construction Realty Safety Group is a New York City construction site safety management company offering full-service construction safety solutions, including on-site, professional safety management staffing, complete and customized Plan Program Development, and all required safety training. Our certified professionals include Licensed Site Safety Managers, Licensed Site Safety Coordinators, Site Safety Inspectors, Construction Superintendents, On-Site Medic Technicians, and all required Safety Managers, Watch Persons, and inspectors. Our most vital offering, however, is our deep value of optimal client service, effectiveness, and thoroughness. We will work with you to provide the most effective service possible while keeping your workers and your project safe. CR Safety presents a holistic approach to safety for our clients, offering integrated packages to meet regulatory requirements, insurance program (OCIP, CCIP) needs or specification requirements. Our services include Plan and Program Development, Safety Inspections, Safety Management and Safety Training. Whether it’s the Chapter 33 requirement of the NYC Building Code or OSHA 1926 requirements, the CR Safety team develops and provides all required plans and programs for our clients including site safety plan drafting, development and submittal, health and safety plans and noise mitigation plans. In addition to planning and development, CR Safety delivers certified professionals to effectively manage safety on technical and administrative levels including Site Safety Managers, Site Safety Coordinators, Qualified Persons for Site Safety, Construction Site Fire Safety Managers, Concrete Safety Managers, licensed superintendents and quality control supervisors. The CR Safety team provides everything necessary to safeguard your project and workers. We are looking for a full-time CAD Draftsperson to join our dynamic production team. As a member of our fast-paced, cutting edge group you will work with Architects, Engineers and construction specialists and draft construction logistics dwgs / Site Safety Plans drawings for industry leading developers and construction managers. Responsibilities • Manage projects from start to finish, including performing site visits, communicating with clients, and drafting site safety plans & construction logistics dwgs., • Work in a team overseeing project design, construction logistics and project administration., • Proficient in reviewing DOB-CSC unit (Formerly BEST Squad) objections and maintaining Building Code, the client's preferences, and design intent., • Prepare site safety plans/dwgs & file with DOB., • Meet with New York City Department of Buildings Plan Examiners to review and obtain approvals of Site Safety Plans., • Good drafting skills. Must be able to balance CAD drafting (For Site Safety Logistics Plans for Alterations, Facade Repairs and New Buildings), project management and coordination., • Perform Quality Assurance reviews of drawing sets., • Conduct site visits for field measurements and drawing research., • Develop and produce presentation materials, including plans, diagrams, details, etc, • Communicate and follow up with clients about specific projects and their goals., • Prepare daily and weekly reports., • Must be able to read and understand construction plans and drawings., • Experience with Microsoft Word, Adobe Reader and Excel is required., • 2-5 years architectural design/CAD drafting work experience, minimum 1 year in Project Coordination, or Management., • Proficient in CAD software and/or AutoCAD experience is required. REVIT knowledge is a plus., • Complex problem solving and decision-making skills., • Good written and verbal communication skills., • Must be a team player and have the ability to effectively multi-task, • Strong leadership, communication, and relationship management skills., • Flexibility in a fast-paced changing environment., • Bachelor’s Degree in Architecture, Civil Engineering, or closely related field preferred., • We offer competitive salary and employment package (included, but not limited to):, • Health benefits, Vision and Dental, • Paid Holidays, • Personal/sick days/Paid Vacation, • Eligibility for an end-of-year bonus, • Pay: $23 to $28 per hour, • 401(k)

Job Description Vice President, Business Development & Hotel Acquisitions SUMMARY: Vice President, Business Development & Hotel Acquisitions will be a senior strategic leader tasked to grow company’s portfolio of third-party managed hotels by identifying appropriate opportunities, developing budgets and proformas, negotiating contracts and coordinating with the company’s executive, marketing, operations and legal teams. The anticipated salary range for this position is $130,000–$160,000 annually. M&R Hotel Management carefully evaluates multiple factors when determining compensation, including work location, professional background, experience, and performance. Final compensation decisions are made based on the specific facts and circumstances of each individual case. In addition to base salary, this role is eligible for a generous annual incentive bonus aligned with established performance targets, as outlined in the Incentive Plan. RESPONSIBILITIES: • Partner with Executive Team to strategically align company direction as it relates to future hotel development, acquisitions, and growth of the company portfolio., • Oversee hotel acquisitions, dispositions, and other transactions by working with appropriate team members to complete structured due diligence which includes survey, environmental studies, internal and external stakeholder meetings, and documents required as part of the process., • Actively work to Identify and pursue hotel acquisition and management opportunities in strategic markets by leveraging industry contacts and networks., • Lead compliance with key agreements including franchise, purchase & sale agreement, ground lease, permits, and appropriate licensing., • Partner and lead process of multiple stakeholders including investors, consultants, municipalities, operations, designers, architects, and project management as part of the business development process., • Oversee project performance against the baseline financial models prepared as part of the feasibility analysis once the development program is established., • Establish and maintain a network of key franchisor contacts, investor partners, landowners, brokers, and hotel consultants and appraisers., • Prepare hotel financial operating projections, development budget, debt assumptions and overall investment return analysis in coordination with appropriate stakeholders., • Conduct fieldwork for market analysis and property inspections., • Conduct feasibility studies and prepare operational and financial analyses for single hotel assets and portfolio., • Oversee all aspects of the organization's business development policies, objectives, and initiatives., • Acts as a trusted advisor, consultant, and confidant to the COO & CEO and senior leadership team, proactively offering advice, counsel, and thought partnership related to business development and growth objectives within the organization., • Partner with leadership, as appropriate, to ensure best in class owner experience in all cases of owner interactions from follow up to delivery to needs assessment., • Work in line with the operational procedures of the organization towards revenue generation and growth goals selling all corporate services (accounting, revenue management, digital marketing, and sales)., • Provide financial oversight for all Business Development related expenses and budgets., • Build and evolve Business Development processes and company contracts., • Review status of sales activity and sales pipeline with COO and provide communication to Executive Team as needed, • A University Degree in Finance, Commerce, Marketing, Hospitality Management or related discipline., • 4 years of hotel or commercial real estate development experience., • 4 years of Hotel Management Contract Negotiation experience., • A minimum of 4 years of experience in the business development and B2B sales field., • Prior hotel valuation, brokerage, or acquisition analyst experience., • Strong background in development including financial feasibility analysis, design, financing, permitting, construction, and project management preferred., • Excellent leadership, interpersonal and communication skills., • Strong, demonstrable business and technical writing skills, including ability to draft or contribute to reports, investment memoranda, presentations, etc., • Strong leadership presence with the proven ability to influence and drive change with senior leaders in scaling the organization and establishing business goals for growth., • Must possess attention to detail, confidentiality, integrity, and the ability to maintain a high level of professionalism in a fast-paced dynamic environment., • Demonstrated leadership skills, evidenced by effectively working as a partner with other executives and stakeholders with strong, demonstrable oral communication skills, including the ability to present to internal and external audiences on technical aspects., • Reputation as a team player with a strong work ethic, integrity, candor, and willingness to accept responsibility and accountability for driving issues to resolutions., • Willingness to travel up to 50%.

Job DescriptionWho we are...At Ecosystem we believe we should be accountable for results. That’s why we've integrated engineering and construction, seeing our projects through from design concept to implementation and commissioning. And that's how we can efficiently solve complex energy and decarbonization challenges in the built environment.Here are some of the projects we've been working on recently in the US: Con Edison: Utility Thermal Energy Network; Museum of Arts and Design, Ventas- Battery Park City. Why this role matters… As a Senior Business Development Manager, you’ll be key to Ecosystem’s growth, leading the acquisition of multi-million-dollar energy infrastructure projects that redefine efficiency and sustainability for businesses across the New York Tri-State Area. You’ll rise to the challenge of ensuring high-impact results, gaining great exposure to multidisciplinary collaboration, strategic thinking, and end-to-end projects. Your expertise in building strategic relationships and navigating complex sales cycles will directly impact our success in markets such as higher education, healthcare, and industrial. Collaborating closely with internal teams and diverse clients, you’ll help to deliver innovative, customized solutions that position Ecosystem as a leader in modernizing energy infrastructure.What you will do... • Establish and maintain a strong customer base by proactively developing the sales funnel and leveraging your network to generate new leads, • Connect regularly with prospects to evaluate their needs and demonstrate how Ecosystem re-works the built environment for greater efficiency and sustainability, • Use a consultative sales approach to develop lasting relationships with executive decision-makers, supporting client retention and identifying cross-sell and upsell opportunities, • Partner with in-house engineering teams to assess and validate client needs from initial contact through to the full acquisition process, • Coordinate and lead clients’ on-site walk-throughs with in-house engineering experts and customers to align on project scope and opportunities, • Collaborate with multidisciplinary teams to craft timely, high-quality proposals that address client concerns, objectives and meet Ecosystem’s standards, • Contribute to go-to-market strategy development and execution in partnership with senior leadership, • Work with Marketing and Communications to enhance Ecosystem’s regional visibility as a results-driven engineering and construction firm, • Monitor client satisfaction through structured feedback at key stages of the client journey Your profile..., • Proven experience in business development, managing complex sales cycles with multiple stakeholders, including developing territories for a growing company, • Strong ability to identify both explicit and implicit client needs, and effectively qualify prospects to optimize team efforts, • Demonstrated success in targeting, pursuing, and securing a significant portfolio of key customers, • Strong influencing skills, with the ability to effectively position turnkey solutions and deliver outcome-based sales approaches that earn client trust, • People-orientated mindset, enjoying in-person interactions to build strong relationships What Ecosystem offers..., • Annual base salaries (approx. $100,000 - $170,000) + sales bonus. This is an approximate range and dependent on location and years of relevant experience, • Generous time off: enjoy 15 vacation days, 5 personal days, 10 public holidays, and a year-end holiday closure, • Complete Group Insurance offer with employer contribution and easy access to health and support through Telemedicine and Employee Assistance Program, • Employer contribution to 401(k), • More than a working tool, cell phones are provided for professional and personal use, • Mature Health & Safety practices, policies and trainings making us leaders in this space, • At Ecosystem, our Approach to Working Together is built on trust, collaboration, and accountability. While flexibility depends on the role, some teams have set expectations for time on-site or in the office. We come together intentionally during key moments to connect, learn, and succeed as a team., • Thriving people-first culture: we put our values in action in DEI, CSR, Innovation, and Social committees, and celebrate our shared success at events like Ecofest, • Tailored career growth and development opportunities through mentorship, training, and career planning

Job Description Crusoe is on a mission to accelerate the abundance of energy and intelligence. As the only vertically integrated AI infrastructure company built from the ground up, we own and operate each layer of the stack — from electrons to tokens — to power the world's most ambitious AI workloads. When you join Crusoe, you join a team that is building the future, faster. We're in the midst of the greatest industrial revolution of our time. The demand for AI compute is boundless, and power is a bottleneck. We're solving that — with an energy-first approach that makes AI infrastructure better for the world and faster for the people innovating with AI. We're looking for problem-solving, opportunity-finding teammates with a sense of urgency, who believe in the scale of our ambition and thrive on a path not fully paved — people who want to grow their careers alongside a team of experts across energy, manufacturing, data center construction, and cloud services. If you want to do the most meaningful work of your career, help our customers and partners advance their AI strategies, and be part of a high-performing team that believes in each other, come build with us at Crusoe. About This Role: Crusoe is hiring a Vice President of Financial Planning and Analysis to build and lead the financial planning function across a capital-intensive, rapidly scaling business spanning AI cloud, digital infrastructure development, energy strategy, real estate, and manufacturing. This role owns the company’s financial operating system. It requires analytical depth, strong operating judgment, and the ability to translate complex operational drivers into clear, decision-ready financial insight. Reporting to the CFO and working closely with our executive team, this leader will ensure we maximize our growth potential, allocate capital efficiently, measure performance with precision and transparently and do so in a disciplined and intentional fashion. We are seeking a well-rounded executive with significant finance leadership experience in capital-intensive or infrastructure-driven environments, deep long-range modeling expertise, and a proven track record of building finance teams and processes in high-growth companies. The right candidate is comfortable challenging assumptions, operating in a complex and dynamic environment, and driving clarity without oversimplifying reality. This is a high-impact opportunity to build a durable, scalable financial organization, shape capital allocation decisions at scale, and partner closely with senior leadership to drive the company’s continued growth. Work Model: This position is currently remote-based within New York, NY; however, please note that this is not a permanent remote role. The company is in the process of establishing a physical office presence in New York, NY, and employees will be expected to transition fully onsite, requiring five days a week at our New York, NY office What You’ll Be Working On * Own consolidated forecasting, annual financial planning, and long-range modeling across all business lines, ensuring a single, defensible source of financial truth. * Build integrated, driver-based models that connect revenue, GPU capacity deployment, construction sequencing, energy strategy, manufacturing throughput, and operating costs into one coherent financial view. * Lead enterprise capital planning and implement rigorous investment evaluation frameworks for data center builds, energy projects, real estate development, hardware deployment, and capacity expansion. * Establish standardized return thresholds, capital allocation governance, and post-investment measurement processes to ensure disciplined deployment and accountability. * Understand and translate complex operational inputs into clear, decision-ready financial analysis for the CFO and executive team, identifying tradeoffs, surfacing risks and recommending action plans. * Improve forecast accuracy and reduce volatility by instituting structured, repeatable planning processes and clear ownership of financial drivers. * Own board-level financial narratives with transparent assumptions, scenario modeling, and variance analysis that withstand scrutiny. * Partner deeply with Infrastructure, Product, Engineering, Manufacturing, Commercial, and People leaders to drive cost discipline, margin clarity, and operating accountability. * Recruit, develop, and lead a high-performing FP&A team with rigorous modeling standards and strong business partnership capabilities. * Design and scale planning systems, data integrations, and reporting infrastructure to support enterprise-grade operations. What You’ll Bring to the Team: * 15+ years of progressive finance experience. * A proven track record of managing $1B+ budgets and building complex long-range models that account for volatility and hardware lifecycle shifts. * The ability to distill complex technical and financial data into clear, persuasive presentations for the Board of Directors and institutional investors. * Experience building and mentoring a world-class Finance team in a high-growth, fast-paced environment. * An MBA, CFA, or equivalent advanced degree in Finance, Economics, or a related field. Bonus Points: * Direct experience working within the infrastructure finance teams of AWS, Google Cloud, or Azure. * Deep understanding of PPA (Power Purchase Agreements) and the financial impact of renewable energy integration. * A passion for the AI space and a working knowledge of the hardware constraints (HBM, InfiniBand, Thermal Management) that drive data center design. * Experience implementing or optimizing advanced ERP and EPM tools (e.g., Anaplan, Adaptive, or NetSuite) for an asset-heavy business. Benefits: * Competitive compensation and equity packages * Restricted Stock Units * Paid time off, paid holidays & leave of absence programs * Comprehensive health, dental & vision insurance * Employer contributions to HSA account * Paid parental leave * Paid life insurance, short-term and long-term disability * Professional development & tuition reimbursement * Mental health & wellness support * Commuter benefits (parking & transit) * Cell phone stipend * 401(k) Retirement plan with company match up to 4% of salary * Volunteer time off * Global travel insurance & emergency assistance * Daily meals allowance * Additional perks & programs specific to location Compensation Range Compensation will be paid in the range of up to $320,000 - $350,000 + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Description Our Company: Originally founded in 1975, BCI has continually evolved to become a leader in the women's fashion industry. Launching initially with CHAUS and private label lines and then expanding into a multi-brand platform business, we have been at the forefront of market trends and the changing retail environment. Our brands, including CeCe, Vince Camuto, Ted Baker, 1.State and Parker, each serve unique customer demographics but are united in their commitment to quality and style. As we expand our presence, BCI remains dedicated to innovation, excellence, and women's empowerment through fashion. The Associate Designer will work closely with the Design Director on the development of the line. Responsibilities: • Support the Creative Director with the design process from initial inspiration to final production, • Communicate daily with sales and production to ensure design sheets are being completed properly and in a timely manner, • Create and execute on the vision of the Creative Director, ensuring that the product is consistent with market trends, while defining the brand identity and overall business strategy, • Developing Design sheets in Exenta (PLM System), • Updating reorder bodies with new ideas while incorporating upcoming trends, • Sourcing trims, prints and novelty fabrics with venders/In the market, • Choosing matching linings, • Setting up new silhouettes in prints and new fabrications in our in house sewing room to get cut and sewn, • Supporting the head designer in creating and organizing a cohesive line, • Minimum 3+ years of fashion design experience, • Preferred background in sportswear design, • Knowledge of garment construction and patterns, • Must be proficient in creating tech packs, • Must have a strong understanding of placement prints, including how to effectively layout prints within garment patterns to maximize fabric yield, • Proficient with Microsoft Excel, • Strong written and verbal communication; self-starter and proactive worker, • Enthusiastic and team-oriented with sense of urgency, • Knowledge of Exenta is not required, but is definitely a plus, • Basic knowledge of pattern construction would be great, but not required, • Must be fluent in Photoshop and Illustrator, • Experience working in Procreate would be great, but not required, • Must be able to sketch (Flats/Floats) in Procreate or Illustrator, • Learns quickly and eager to learn all parts of the industry, • Must have an eye for Merchandising, Assorting Fabrics/Garments accordingly, • Must be comfortable with long hours, if needed, • Portfolio preferred! The salary range for this full-time role is dependent upon candidate experience between $70,000 - $80,000 per year. BCI is an Equal Opportunity Employer Applicants are considered regardless of race, color, religion, creed, age, sex, pregnancy, family responsibility, national origin or ancestry citizenship, marital status, sexual orientation, transgender status, veteran’s status, genetic information, or as a qualified individual with a disability or any other characteristic in accordance with applicable law. Benefits • Health Benefits (Medical, Dental & Vision), • Life Insurance, • Flexible Spending Account, • 401k Program, • Paid Time Off, • Robust Holiday Schedule, • Commuter Benefits, • Training & Development, • Growth Opportunities!

Job DescriptionFollow your passion Are you looking to make a BIG impact? At Zeta, we pursue an unprecedented combination of high academic achievement and social-emotional development for our students. We insist that every student receives a world-class education while fostering a love for learning. We are passionate about changing the landscape of public education in New York City and beyond, and we are uncompromising in our mission. Currently, we operate multiple elementary and middle schools in the Bronx, Upper Manhattan, and Queens. We plan to grow and open 1-2 schools each year because children in every community deserve excellent, equitable education. Join our growing team today, and be a change agent for children. Our Network office is located at 401 W 218th St., New York, NY 10034. Our Network team follows a hybrid work schedule: we work in-person from our office on Tuesdays and Thursdays with optional remote days on Mondays, Wednesdays, and Fridays, if your team's scope of work permits. Deliver powerful results To achieve our vision, we are searching for an In-House Architect or Designer, with a Master's Degree (in a field such as architecture, design, business, or project management), and at least 5-7+ years of experience in architecture or design with strong skills as a project manager. Responsibilities: • Ensures that all Zeta buildings are built as beautiful, world-class, and joyful spaces for learning in accordance with our philosophy of design and design specifications., • Maintains and continuously improves Zeta's design guidelines and specifications guides, including developing and codifying Zeta's design guidelines for bidding purposes., • Supports in developing RFPs and bid scope sheets for Zeta's new facilities projects., • Independently drives and works closely with contracted architects to ensure Schematic Design (SD), Design Development (DD), and Construction Documents (CD) are 100% aligned with Zeta's design standards and specifications, safety requirements, and optimized for our school model., • Driving on-time project completion by managing stakeholder coordination and leading design components, including Design Development milestones, submittal approvals, RFI close-outs, and punch list reviews., • Ensuring all projects stay within budget by developing budgets, leading value engineering strategies, guiding cost-effective product selections, and negotiating award pricing to achieve savings., • Serves as the internal expert on all design documents and specifications and maintains a current and real-time log of all issues in an organized and scalable manner, • Develops and maintains project budgets and project schedules; proactively manages and raises issues for any off-track items, • Supports and executes scalable design and decoration of Zeta schools, in close coordination with Zeta's building design consultant(s), • We are passionate about our mission of providing world-class education to all students, • We bring a mindset of growth, flexibility, and openness to feedback, • We are hungry and determined to not only meet our goals, but surpass them, • We are humble, willing to put the team's needs ahead of our own, and committed to contributing to a collaborative work environment, • We have a high bar for excellence and sweat over the details, • Comprehensive and affordable medical, dental, and vision plans, • Flexible spending accounts for eligible medical purchases and commuter expenses, • 403(b) retirement plan; Zeta offers matching contributions toward your savings, • Monthly stipend for wellness and lifestyle expenses (Gym memberships, salon appointments, concerts – it's up to you!), • 4 live therapy sessions per month through Talkspace, and a free Headspace subscription, • MacBook Air, and specified monthly reimbursement for use of mobile phone, • Fully stocked teacher workrooms with favorite snacks and Nespresso machine, • Zeta swag, team outings, and NYC's finest sweet treats, • Clear pathway to professional growth, • Consistent feedback and support from managers and teammates, • Community Circle practice to build and strengthen our sense of team

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll DoAbout the Team The Business Systems Engineering team partners closely with Data Center Operations, Infrastructure, Supply Chain, and IT to design and scale the systems that power CoreWeave's global infrastructure footprint. This team is responsible for building and maintaining platforms that support the full lifecycle of data center assets—from deployment and commissioning to operations and decommissioning—within a high-growth, high-density compute environment. About the Role We are seeking a Business Systems Engineer to design, build, and support the systems enabling our Data Center and Logistics Operations. This role focuses on the end-to-end lifecycle of data center assets—from planning and rack-level modeling to decommissioning—while optimizing DCIM and CMMS platforms to support high-density GPU workloads across multiple data center sites. You will play a key role in ensuring clean system data, efficient operational workflows, and seamless integration across operations, engineering, and IT systems. This role is ideal for someone who understands how infrastructure and operations intersect and can translate complex data center workflows into scalable, automated systems. What You'll Own • Define enterprise DCIM design, including data ownership and system-of-record boundaries for white space and gray space infrastructure, • Lead configuration and administration of DCIM platforms (e.g., Sunbird, Nlyte) and integrations with ITSM tools (e.g., Jira) and ERP systems (e.g., NetSuite), • Build and maintain real-time telemetry pipelines for rack-level power, thermal monitoring, and liquid cooling systems, • Develop internal tools, dashboards, and reporting to visualize data center capacity, health, and operational milestones, • Integrate build-out and commissioning workflows with ongoing operational systems (DCIM, SCADA, ITSM, ERP), • Create reporting, alerting, and monitoring frameworks to support capacity planning and operational readiness, • Partner with Security and Compliance teams to ensure traceability, access controls, and audit readiness across systemsWho You Are, • Bachelor's degree in Information Systems, Computer Science, or related field, • 5+ years of experience working with DCIM platforms, infrastructure systems, or data center systems architecture, • Strong understanding of data center workflows, including rack deployment, provisioning, and asset lifecycle management, • Deep knowledge of power and cooling infrastructure, structured cabling, and telemetry systems, • Expertise in DCIM data models, including hierarchy mapping, asset relationships, and connectivity tracking, • Experience supporting data center build-outs, commissioning, and asset handoff from construction to operations, • Strong cross-functional collaboration skills across Infrastructure, Operations, Supply Chain, Finance, and IT, • Experience building custom tools, scripts, or APIs (e.g., Python, JavaScript/TypeScript, Node.js, React) is a plus, • Experience with construction/project management tools (e.g., Procore, SiteTracker) is a plus, • Familiarity with audit, compliance, and infrastructure traceability requirements, • You enjoy building systems that support complex, large-scale infrastructure operations, • You are curious about how data center systems evolve in high-growth environments, • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $139,000 to $204,000. The starting salary will be determined based on job-related knowledge, skills, experience, and market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job DescriptionCompany Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programmes as we turn challenge into opportunity and complexity into success. Our capabilities include programme, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority interest. Turner & Townsend and CBRE work together to provide clients with the premier programme, project and cost management offering in markets around the world. Job Description Turner & Townsend are looking for experienced Senior Cost Managers and/or Quantity Surveyors to act as the key, day to day client interface, ensuring that client objectives are met through the delivery of a value-added cost management service. To be successful in this role you must have great communication skills and be comfortable operating in a client-facing role. The ideal candidate will be self-motivated, driven and able to work independently as well as part of a team. In this significant position you will be responsible for providing leadership and direction, embedding, and promoting the purpose, values, and vision of Turner & Townsend. Responsibilities: • Estimating and negotiating change orders throughout the construction lifecycle., • Provide estimate and cost planning to include producing and presenting the final cost plan., • Review and participate with the design services team and general contractor in the development of the cost estimates., • Reconcile changes and assist the general contractor to ensure that their data is accurate., • Communicate or meet with general contractor and owner project manager to gather status information to prepare a cost estimate update., • Prepare written comments to the general contractor’s submissions, including the executive summary., • Coordinate all sources of cost information for cost discussions and suppliers direct from NPA, subs, quantities from A/Es., • Inform and drive engineering priorities based on cost impact., • Work proactively with minimal supervision to resolve scheduling issues., • Manage cost checks and carry out valuations on larger projects. Complete timely, accurate cost checking and valuation processes., • Participate effectively with post contract cost variances and the change control processes., • Manage Cost impact / contingency management and commitment tracking logs., • Prepare funding data presentations and coordinate VE sessions with stakeholders., • Developing cost plans and estimates through the design phase, delivering updated cost plans at appropriate design milestones., • Providing commercial input to design optioneering and input into value engineering exercises., • Reviewing contractor and subcontractor pricing and leading negotiations on behalf of the client to drive fair contract prices., • Performing quantity surveying, cost controls and change management activities throughout the project lifecycle., • Ensuring that post-contract cost variances and change control processes are managed effectively., • Ensuring that cost auditing and valuation work is managed effectively and that a robust process for cost validation is in place., • Carrying out the production of monthly cost reports for presentation to the client., • Ensuring that final accounts are negotiated and agreed in a timely manner., • Compiling as built cost estimate records for benchmarking purposes., • Identify, coach and mentor talent to realize their potential and celebrate the success of others., • Display excellence in leadership and service delivery on commissions is in line with the conditions of appointment, • Financial Management - Utilize internal software to track ongoing margin levels and monthly fee/resource forecasts for each commission and financial reports, • Implement and maintain the use of internal Business Management Systems and company delivery methodologies and tools in the office to ensure consistent delivery of best practice for Clients and the company, • Be a role model that drives a one business culture that achieves great outcomes by striking the right balance for our people, clients, stakeholders, and society., • SOX control responsibilities may be part of this role, which are to be adhered to where applicable. Qualifications, • Bachelor’s degree in construction management, cost management, quantity surveying, engineering or field related to construction., • Minimum 5-7 years of relevant experience working in a cost management role in the construction industry., • RICS accredited or working towards it is preferred., • Experience of leading cost management on medium or large sized construction projects of medium to high complexity., • Construction consultancy experience is strongly preferred., • Good knowledge of construction industry technical matters, such as different procurement routes, value management and value engineering., • Excellent communication skills. Additional Information The salary range for this full-time role is $130K-$160K per year. Ranges are determined by role and level and represent a good faith effort to provide a fair and equitable salary. This range is a reflection of base salary only, not of a total compensation package. Please note Turner & Townsend reserves the right to pay more or less than the posted range, depending on candidate’s experience and qualifications. Our inspired people share our vision and mission. We provide a great place to work, where each person has the opportunity and voice to affect change. We want our people to succeed both in work and life. To support this, we promote a healthy, productive, and flexible working environment that respects work-life balance. Turner & Townsend is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and actively encourage applications from all sectors of the community. Please find out more about us at and All your information will be kept confidential according to EEO guidelines. #LI-LH2 Join our social media conversations for more information about Turner & Townsend and our exciting future projects: Twitter Instagram LinkedIn It is strictly against Turner & Townsend policy for candidates to pay any fee in relation to our recruitment process. No recruitment agency working with Turner & Townsend will ask candidates to pay a fee at any time. Any unsolicited resumes/CVs submitted through our website or to Turner & Townsend personal e-mail accounts, are considered property of Turner & Townsend and are not subject to payment of agency fees. In order to be an authorised Recruitment Agency/Search Firm for Turner & Townsend, there must be a formal written agreement in place and the agency must be invited, by the Recruitment Team, to submit candidates for review.

Job DescriptionAbout Us Solar Landscape is the leading commercial rooftop solar developer in the U.S. Only 4% of commercial rooftops host solar today — we’re changing that, fast. Commercial rooftop solar is the fastest, smartest way to build new clean power — delivering megawatts of generation in months, not years, and powering America’s energy and future right where it’s needed most. By turning rooftops into local power plants, we’re reshaping how — and how fast — energy gets built in the U.S. Recognized as the #1 Distributed Generation Developer by New Project Media, the #1 National Commercial Rooftop Solar Developer by Solar Power World, and winner of the U.S. Department of Energy’s Grand Prize for Clean Energy, Solar Landscape is defining the future of energy generation in America. Headquartered in Asbury Park, New Jersey, Solar Landscape has offices in Chicago, Baltimore, and New York City and operates in over a dozen states nationwide. We move fast, solve hard problems, and take our work seriously — but never ourselves. We value clear thinking, accountability, and execution. At the same time, we’re collaborative by default, and believe the best work happens when people enjoy working together. Our team is made up of smart, grounded people who show up for each other — whether that’s troubleshooting a system design or catching up over lunch. If you’re looking to do meaningful work in a high-performance environment — and be part of the team reshaping how energy gets built in the U.S. — we’d love to meet you. About The Role We are currently looking to fill the position of Preconstruction -Senior Analyst (Illinois). This role will report to the Senior Manager for Illinois on the Preconstruction Team. The Senior Analyst will be responsible for managing a portfolio of early-stage development rooftop community solar projects. Job responsibilities include: researching AHJ policy and facilitating local relationships with stakeholders, project planning, site visit and feasibility assessment coordination, project controls/reporting, risk management, etc. Responsibilities • Assumes ownership of a portfolio of projects from Business Development., • Manages all Project Management aspects of the projects from handoff through submission of construction permits., • Coordinates all non-ministerial permits to include zoning, planning, etc., • Ensures all preconstruction site visits are completed and information required for feasibility is obtained; coordinates across internal teams, external clients and subcontractors for critical site feasibility assessments., • Manages site evaluation data in internal CRM, researching relevant data when necessary, • Maintains a knowledge base on AHJ requirements including relevant zoning parameters, ordinances and codes, • Understands project feasibility documents such as ALTA, Title, Leases, and tracks them for projects, • Assists Engineering team in decisions and development of the project design in compliance with Local, Company, and Customer requirements., • Participates in weekly Client meetings, responds and/or relays preconstruction project tasks to the engineering team., • Process submittals and RFIs as required., • Facilitates subcontractor contracts and purchase orders, • Provides status reports to Senior Management on a regular basis, particularly regarding engineering, procurement, schedule, and cost forecasting., • Builds trust and rapport with all Solar Landscape departments.Qualifications, • Bachelor's degree in Construction Management, Engineering, Environmental Management or related field of study., • 2+ years development, construction, and/or engineering experience in Solar., • Proficient with Microsoft Office suite, Dynamics 365 (or other construction management software), Microsoft Project, Adobe Acrobat Pro or equivalent pdf editor., • Excellent written and verbal communication skills., • Effective Negotiation skills., • Knowledge of behind-the-meter and Utility interconnections., • Understanding of Purchase Order, Subcontract, PPA, EPC Contracts and Project accounting., • Organization and communication skills., • Detail-oriented, self-starter., • Knowledge of construction safety requirements; OSHA 10 or 30 certification., • Valid Driver’s License; must be willing to travel to various job sites., • Ability to climb ladders and access building roofs. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Overview: Digital & PLM Project Manager will be Responsible for overseeing the entire product lifecycle management process within Garan organization, ensuring efficient product lifecycle management process ensuring efficient Product development, data integrity, and compliance by strategically managing all stages of a product's journey from conception to End-of-Life. In this pivotal role, responsible for leading the integration of advanced digital design tools & PLM. Deep technical expertise in 3D garment creation, a solid foundation in apparel design and fit, with thorough understanding of children's wear. Your leadership will shape the future of product development by reducing time-to-market, increasing sustainability, and delivering an enhanced customer experience. You will collaborate across multiple teams, including Product Development, Design, Merchandising, and Supply Chain, to drive efficiency and maintain a strong competitive edge in the children's apparel market. Key Responsibilities: Strategic Leadership in 3D Design: • Lead and manage a high-performing 3D Technical Design team, guiding the creation of accurate, production-ready virtual samples and prototypes for children’s apparel., • Establish and refine workflows for 3D garment creation, ensuring the seamless integration of design, fit, and production requirements in digital formats., • Explore and implement cutting-edge technologies in 3D garment simulation and virtual sampling to enhance the creative capabilities of the design team while ensuring realistic, high-quality results. Cross-Functional Collaboration & Process Optimization: • Partner with the Design, Product Development, Merchandising, and Supply Chain teams to drive the adoption of 3D assets throughout the product development lifecycle, ensuring alignment from concept to production., • Develop and standardize processes for virtual fitting, sample validation, and design iteration, reducing reliance on physical samples and shortening the time-to-market cycle., • Provide training and ongoing support to cross-functional teams, ensuring they fully understand and leverage 3D design technologies to streamline operations, improve product accuracy, and facilitate quicker decision-making. Quality Control, Fit Standards & Accuracy: • Define and uphold rigorous standards for fit, garment construction, and sizing accuracy in 3D models, ensuring that all digital prototypes meet the brand’s quality benchmarks for children’s apparel., • Lead virtual fit sessions with cross-functional teams to assess digital prototypes, comparing them against real-world samples to ensure that the final product is consistent in both fit and design., • Analyze fit data and customer feedback to continuously refine patterns, fit models, and construction techniques, ensuring that each product meets consumer expectations and performs optimally in the market. Sustainability Initiatives & Operational Efficiency: • Champion sustainability by increasing the adoption of virtual sampling processes, significantly reducing the need for physical samples, and helping to minimize waste and resource usage., • Collaborate closely with the Supply Chain and Sourcing teams to drive efficiencies across the entire product development process, from design to production, ensuring that sustainability goals are aligned with business objectives., • Regularly assess the environmental impact of 3D design initiatives and virtual sampling, tracking metrics and identifying new opportunities for further improvement in sustainability efforts. Team Leadership, Development & Culture: • Provide leadership and mentorship to the 3D Technical Design team, fostering a culture of collaboration, creativity, and continuous learning., • Set clear, measurable goals for the team, ensuring alignment with organizational objectives, and providing resources and support for team members to reach their full potential., • Identify emerging trends and skill gaps within the team, developing professional development programs and training sessions to keep the team ahead of industry innovations and technological advancements in 3D design. Technology Integration & Innovation: • Stay at the forefront of 3D design technology and garment simulation trends, identifying and implementing new tools and software that can improve both the creative and technical aspects of product development., • Work closely with IT, Design, and Product Development teams to ensure that all technological tools are seamlessly integrated into the product lifecycle, maintaining compatibility and efficiency across platforms., • Evaluate and introduce advanced technologies, such as AI-driven garment simulation or fabric simulation tools, to continuously elevate the accuracy and realism of digital prototypes. Salary: $90,000

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job DescriptionDescription: Tillman FiberCo is building a 100% fiber network to support the next generation of broadband services. Tillman FiberCo is a portfolio company of Tillman Global Holdings, a holding company focused on building premier digital infrastructure businesses globally. We have an incredible opportunity for an Engineering Project Manager. This position is remote; however, preference will be given to candidates residing in Florida or within the Southeast U.S. Requirements and Responsibilities: • Oversee and manage changes to project scope, schedule, and costs, ensuring timely delivery of projects within defined scope and budget., • Analyze the data input to create accurate internal and external reporting and forecasting for all stakeholders., • Track project performance, specifically to analyze the successful completion of short and long-term goals., • Clarify and develop project scope, detailed work plans, schedules, objectives, estimates coordinates activities of the project team, identifying resources and implementation strategy., • Collaborate across multiple functions to ensure adherence to quality standards and internal processes, review project deliverables, and drive the achievement of required project results, • Provide overall direction and technical or analytical guidance to project and program teams, often spanning multiple organizations, markets, and external suppliers/vendors., • Direct experience leading new fiber deployment and/or expansion initiatives, • Oversee general contractor deliverables, closely monitor progress, and proactively identify risks to ensure alignment with the market build plan., • Lead project status meetings, prepare project reports, and oversee tracking and analysis, including the management of project interdependencies., • Ensure timely completion of milestones as outlined in the contract and facilitate prompt billing., • Create and maintain comprehensive project documentation., • Identifies, recommends and takes action to drive the analysis, solutions resolution to all issues/roadblocks in a timely fashion. Requirements: What we are looking for: • Minimum of 5 years of relevant experience in telecommunications, including project management, major construction fieldwork, project estimating, project controls, project engineering, or equivalent experience in a competitive production environment., • Ability to facilitate project creation and management in standard PM tools (MS Project, Smartsheet, Confluence, JIRA, etc.), • Experience with Telcom Network Design systems, • Vendor & Contract Administration, • Strong interpersonal and communication skills., • Expert knowledge in Microsoft (More specifically Power Point & Excel), Adobe, and related systems, • Ability to analyze data to drive strategic business decisions is key., • Ability to build a cohesive relationship with multiple departments through training, development, and accountability As a growing company, we are committed to attracting and developing the absolute best talent by offering a workplace where results are recognized and rewarded. We offer a terrific opportunity for you to grow: • Challenging, rewarding career within a growing company, backed by a global investor and owner of digital infrastructure assets., • Competitive Salary, • East Coast based company (will work on EST time), • Direct Hire Opportunity, • Collaborative environment, with on-the-job training and mentorship opportunities, • Competitive benefits and wellness package, including medical, dental and vision coverage., • 401k plan with company match, • Generous PTO and 11 holidays annually, • Paid parental leave., • Employee Recognition Program

Job Description Role Overview As a CAD Production Drafter / Engineer, you will play a critical role in transforming custom cabinetry designs into precise, build-able, and machine-ready production files. This position serves as the technical bridge between the design team and the production floor, ensuring that complex custom projects move smoothly from concept to fabrication. You’ll collaborate closely with project managers, CNC operators, engineers, and cabinet makers to support high-quality, efficient production of custom cabinetry and millwork. Key Responsibilities: • Prepare detailed shop drawings, part lists, and engineering documentation based on architectural plans, field measurements, and concept sketches., • Create and manage machine-ready CAD files for CNC production, including DXF files, nested panel layouts, and toolpath-ready outputs., • Translate complex custom cabinetry and millwork designs into accurate, build-able components., • Work closely with project managers and production leads to ensure accuracy, feasibility, and manufacturability., • Specify hardware and accessories using industry-standard systems (e.g., BLUM, Häfele)., • Maintain drawing standards, part libraries, and assist with standardization of construction methods., • Participate in design and production reviews to help resolve technical or fabrication challenges. Qualifications • 2–5 years of experience in CAD drafting, millwork engineering, or production design., • Strong proficiency in 2D and 3D CAD software (AutoCAD or similar)., • Proven ability to create accurate, build-able shop drawings from architectural and conceptual inputs., • Solid understanding of cabinet construction methods, custom woodworking, and joinery., • Familiarity with CNC manufacturing processes, including panel nesting., • Strong problem-solving skills with the ability to manage projects from concepts through production., • Excellent communication skills for collaboration across design, engineering, and production teams. Preferred Skills (Not Required) • Experience with CAM software or CNC programming., • Familiarity reviewing architectural drawings, red lines, and markups., • Experience with high-end residential or commercial custom cabinetry projects.

Job DescriptionAbout Us Solar Landscape is the leading commercial rooftop solar developer in the U.S. Only 4% of commercial rooftops host solar today — we’re changing that, fast. Commercial rooftop solar is the fastest, smartest way to build new clean power — delivering megawatts of generation in months, not years, and powering America’s energy and future right where it’s needed most. By turning rooftops into local power plants, we’re reshaping how — and how fast — energy gets built in the U.S. Recognized as the #1 Distributed Generation Developer by New Project Media, the #1 National Commercial Rooftop Solar Developer by Solar Power World, and winner of the U.S. Department of Energy’s Grand Prize for Clean Energy, Solar Landscape is defining the future of energy generation in America. Headquartered in Asbury Park, New Jersey, Solar Landscape has offices in Chicago, Baltimore, and New York City and operates in over a dozen states nationwide. We move fast, solve hard problems, and take our work seriously — but never ourselves. We value clear thinking, accountability, and execution. At the same time, we’re collaborative by default, and believe the best work happens when people enjoy working together. Our team is made up of smart, grounded people who show up for each other — whether that’s troubleshooting a system design or catching up over lunch. If you’re looking to do meaningful work in a high-performance environment — and be part of the team reshaping how energy gets built in the U.S. — we’d love to meet you. About The Role We’re seeking a Procurement Manager to lead the day-to-day execution of procurement operations across project-based sourcing and logistics coordination. In this role, you will oversee a team of procurement and logistics analysts, ensuring materials are sourced, tracked, and delivered in alignment with project timelines and business needs. You’ll play a critical role in driving operational excellence by establishing and reinforcing procurement processes, improving workflow consistency, and supporting team performance. This position partners closely with cross-functional teams to ensure seamless coordination between procurement activities and project execution. The ideal candidate is a strong people leader and operator who thrives in a fast-paced environment, brings a process-oriented mindset, and is passionate about building efficient, scalable procurement functions. Responsibilities • Drive accountability for procurement cycle times and execution quality., • Partner with Engineering Managers, Project Managers, and Project Finance to align procurement timelines with project needs., • Own end-to-end PO execution, including requisition intake, vendor coordination, and order placement., • Manage vendor onboarding processes and ensure compliance with internal standards., • Oversee storage coordination and transition of materials to logistics for delivery execution., • Ensure procurement activities align with project-based sourcing strategies., • Partner closely with Accounts Payable on: invoice reconciliation, invoice discrepancy resolution., • Vendor onboarding documentation and setup., • Ensure procurement data integrity to support accurate financial processing., • Enforce procurement workflows, approval thresholds, and internal controls., • Maintain and improve SOPs across procurement processes., • Document workflows and support process standardization as systems mature.Qualifications, • Bachelor’s degree in supply chain, logistics, warehouse management, industrial engineering, business, or related field—or equivalent practical experience., • 5+ years of experience in procurement, supply chain, or operations., • Experience managing or mentoring teams in a fast-paced environment., • Strong background in project-based procurement execution., • Experience working cross-functionally with engineering, finance, and Operations., • Strong organizational and execution skills., • Effective communicator across technical and non-technical teams., • Process-oriented with a focus on accountability and continuous improvement., • Ability to manage competing priorities across multiple projects., • Systems thinker with strong analytical and problem-solving ability., • Clear communicator who can lead vendors/3PLs and train teams., • Bias for action, organization, and continuous improvement., • Experience in solar, construction, or infrastructure industries preferred. Salary will vary depending on your location and job-related skills and experience. This is an incentive-based position with the potential to earn more. For part-time roles, your compensation will be adjusted to reflect your hours. Benefits and Perks We offer competitive compensation and benefits designed to support you inside and outside of work: · Training / Professional development opportunities · 401(k) with 4% company match· Summer Fridays· Flexible remote/hybrid work options· Paid parental leave· Team lunches, events, and stocked kitchens· Modern, collaborative office spaces in Asbury Park, New York City, Boston, Chicago, and Baltimore· Medical, dental, and vision coverage· Company-paid life and long-term disability insurance We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Senior Electrical Distribution Systems to lead the design, specification, and integration of the power supplies, power distribution network, grid interface, STATCOM, and energy storage systems for the company’s Eos integrated stellarator. This role combines high-voltage substation and distribution infrastructure design with simulation-driven development of plant-wide energy management strategies. This role will be responsible for defining and validating the full electrical infrastructure, ranging from the high/medium-voltage power supply systems, power generation units, HV/MV utility interconnection, and substation architecture to backup generators and BESS platforms. You will interface with external EPC and utility partners, while driving internal technical requirements, simulations, and review processes across the design, procurement, and commissioning lifecycle. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the design of the Eos power distribution architecture, including power supply systems, medium and high-voltage distribution, MV switchgear, LV panelboards, and critical backup circuits., • Define grounding, neutral earthing, surge protection, and lightning protection strategies for plant-wide electrical infrastructure., • Evaluate integration of grid interconnection, backup generators, STATCOM, and Battery Energy Storage Systems (BESS) for load balancing, UPS capability, and magnet power recovery., • Run detailed load flow, short-circuit, and transient stability simulations using tools such as ETAP, DIgSILENT PowerFactory, or PSCAD., • Model time-varying load profiles for power supply systems and estimate steady-state vs. transient energy demands., • Contribute to the plant’s overall power management strategy, load shedding philosophy, and power quality targets., • Develop technical specifications, single-line diagrams, protection philosophies, and equipment layouts., • Lead development of technical requirements for external EPC firms responsible for final design, construction, and commissioning., • Participate in design reviews, FAT/SAT, vendor interface, and field verification of electrical systems.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Systems, or related field., • 7+ years of experience in power systems engineering, including substation design, grid integration, or industrial distribution infrastructure., • Experience with medium- and high-voltage distribution (up to 230 kV preferred), transformer selection, protective relaying, and electrical safety., • Proficiency in electrical system modeling and simulation tools, such as ETAP, PowerFactory, SKM Power Tools, or PSCAD, • Strong understanding of IEEE, NFPA, IEC standards, grounding calculations, and utility interconnection requirements., • Experience in power systems for fusion devices or accelerators., • Familiarity with BESS systems, UPS, and energy management systems (EMS)., • Experience coordinating with utility providers, EPC contractors, and third-party interconnection consultants., • Understanding of power supply dynamic behavior (e.g. magnet loads, pulsed systems) and interaction with grid stability., • Knowledge of SCADA/EMS integration, protective device coordination, and commissioning procedures., • Simulation & Analysis: ETAP, PowerFactory, PSCAD, SKM, CYME., • CAD & Design Tools: AutoCAD Electrical, EPLAN, Revit MEP., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a highly motivated Project Engineer to join Building Management System(BMS) department in our New York office. The Project Engineer is a technically skilled and experienced engineer with developed communication, coordination, project management and leadership skills. The Project Engineer typically leads the design on multiple smaller projects and is the key designer on one or two larger base-building and infrastructure upgrade projects. The Project Engineer actively participates in mentoring and development of engineers, including leading courses JB&B University. The Project Engineer is expected to proactively coordinate, communicate, problem solve across disciplines, and exhibit the ability to balance the client relationship with an understanding of the project's financial goals. Key Responsibilities Design • Design Building Management Systems (BMS) for commercial office buildings, laboratories, hospitals, and data centers., • Write project specifications for building automation systems utilizing direct digital control systems., • Leads the design on BMS Tenant fit-out projects and is a key designer on BMS base building/infrastructure upgrades., • Establishes design criteria from the project proposal and assembles basis of design documents., • Assembles a complete set of contract documents for their trade including the specifications, control diagrams, point matrices and system architecture drawings., • Reviews control shop drawings, RFI’s, Contractor change orders, performs site visits and punch-lists with limited supervision to verify that designs are being implemented accurately., • Meet with contractors to assist in construction coordination., • Interface with clients to determine goals and expectations of BMS design., • Survey and analyze existing control systems for either upgrade or replacement.Project Management, • Assists in establishing an efficient project schedule for his/her project team that ensures appropriate use of resources while adhering to deadlines., • Assists in communicating with all internal and external project members about deadlines, issues, meetings, and deliverables to project success., • Participates in the preparation of basic proposals/add services., • Assists in coordinating, collaborating and updating entire project team (all internal departments) on a regular basis to ensure that design documents are aligned, and deadlines and design expectations are met., • Attends project meetings alone or with Associate/Principal and provides technical support/expertise as needed., • Meets with supervising Associate/Principal on a regular basis to provide project updates and address any outstanding problems/issues. Team Management and Development, • Effectively prioritizes own work; supports all staff in completing their tasks to adhere to the project schedule., • Assists in the review of other team members’ contract documents, calculations, shop drawings, design work and routing of major distribution., • Understands and manages the complete design process for all types and phases of projects., • Communicates project goals clearly and consistently to align with client expectations. Minimum Qualifications, • Bachelor’s degree in electrical or mechanical engineering., • 4-7 Years’ experience in design, installation and commissioning of building automation and temperature control systems., • Demonstrates and embraces JB&B core values., • Demonstrates entrepreneurial attitude toward problem solving., • Maintains a professional demeanor with clients and coworkers., • Develops job knowledge and technical expertise through participation in educational and professional development opportunities., • Seeks feedback on his/her performance; takes action to enhance strengths and improve weaknesses., • Assumes extreme ownership of his/her work both internally and externally (e.g., representing his/her trade at Client or construction meetings)., • Exhibits leadership ability within department., • Proficient in software tools (e.g., AutoCAD, BIM). Why Work at JB&B? Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $93,000 - 105,000 annual salary. Jaros, Baum & Bolles is an equal opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR I8xn4uovcM

Job Description Summary If you are looking for a career with excellent earnings potential and sales opportunity - then look no further than Global Furniture Group, one of the largest manufacturers of workplace, education, healthcare + hospitality furniture in North America. Global Furniture Group has an immediate career opportunity for Territory Manager, A+D in the New York City Area. This candidate will play a key role in influencing design specifications, driving demand generation, and representing the Global brand as a trusted resource to design professionals, project teams, and industry stakeholders across the assigned territory. Essential Duties and Responsibilities • Develop and sustain strong, loyal relationships with architects and, • Build and maintain strong relationships with key influencers, including architects, design firms, independent reps, dealers, and end users to increase sales efforts through specifications of our Global Office, Global Care, and Evolve systems product lines., • Develop and execute a strategic plan to increase Global’s visibility, engagement, and product specification within the A+D community., • Actively promote Global’s products, capabilities, and design solutions to architects, designers, and specifiers through presentations, Live demos, showroom tours, events, and project consultations., • Conduct ongoing product education, and training sessions for A+D professionals, ensuring understanding of Global’s product offering, differentiators, and design resources., • Represent Global at industry trade shows, networking events, CEU presentations, and industry associations (e.g., IIDA, ASID, AIA, NEWH)., • Track project opportunities through CRM tools and work cross-functionally with sales and dealer teams to follow through on specifications., • Provide market feedback and competitive intelligence to product management and marketing teams., • Maintain an up-to-date knowledge of industry trends, emerging design needs, and evolving workplace strategies., • Collaborate with internal marketing and product development teams to support new product launches, campaigns, and initiatives within the territory., • Bachelor’s degree in Business, Marketing, or a related field preferred. Equivalent combinations of education, experience, or military service will be considered., • Minimum of 3-5years of outside sales experience, preferably in dealer or distribution sales, furniture, building materials, or related industries., • Proven track record of meeting or exceeding sales targets., • Strong business acumen and ability to interpret and on business reporting., • Strong relationship-building, negotiation, and communication skills., • Ability to analyze territory potential, identify growth opportunities, and execute sales strategies., • Ability to sit and drive for extended periods., • Ability to walk and navigate customer sites, including offices, warehouses, rooftops, or construction areas as required., • Ability to stand for extended periods during meetings, presentations, and customer events., • Occasionally lift, carry, and transport product samples or marketing materials up to approximately 25 pounds., • Effective verbal communication, including presentations and negotiations., • Ability to plan daily activities, manage time independently, and prioritize tasks to achieve business objectives., • Self-motivated and able to work independently with minimal supervision., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook); CRM experience preferred. The role is a mix of office, remote, showroom, and client-facing settings. Frequent travel within the assigned territory is required, with exposure to varying customer environments such as offices, showrooms, event places as well as occasional outside weather conditions. While performing the duties of this job, team members are regularly required to frequently travel within the assigned territory – more than 50% of time spent in the field including driving to client meetings or events. This role may occasionally require lifting or transporting product samples or materials up to 50 lbs. (e.g., product samples, display materials). Must be able to sit, stand, and move throughout showrooms, client spaces and event locations. WHO WE ARE Global Furniture Group is a leading North American Manufacturer of furniture solutions. Global offers a broad range of furniture products designed for the workplace, education, healthcare + hospitality markets, delivering exceptional value and quality to its network of dealers, designers and customers. Operating for 50+ years and employing more than 4,000 people worldwide, Global has locations throughout Canada, the US, Mexico, China and the UK. COMPENSATION & BENEFITS Actual base pay offered will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. At Global, an individual may not be hired at the high end of the range for their role. Compensation decisions are dependent upon the facts and circumstances of each potion and candidate. (If a bonus or commissions see below for additional sentence). Global offers a comprehensive employee benefit program that enables our employees to stay healthy, feel secure and maintain a work/life balance. The following are benefits we offer employees (or may be eligible for): Paid Time Off | Holiday Pay | Medical/Prescription Insurance | Dental Insurance | Vision Insurance | Health Savings Accounts (HSA) | Company-Paid Life and AD+D Insurance | Company Sponsored Long-term Disability | Short-term Disability | Voluntary Life Insurance | Employee Assistance Program (EAP) | Critical Illness and Accidental Injury Insurance | FSA | 401(k) & Roth 401(k) BONUS/COMMISSIONS This position is also eligible for performance-based commissions based on sales volume in assigned region. WHERE WE ARE Global has distribution centers and showrooms located all across the USA + Canada. Global USA Showrooms: Atlanta | Boston | Chicago | Irvine | Miami | NYC | Philadelphia | Phoenix | Washington DC Global USA Showrooms + Distribution Centers: Atlanta | Baltimore |Chicago | Cincinnati | Dallas | Denver | Houston | Kansas City | Los Angeles | Miami | Philadelphia | Seattle | Tampa You can visit us at . Work Authorization: Must be legally authorized to work in the U.S. on a full-time basis. Global does not sponsor work authorization or visas for this role. Global is a smoke-free, drug-free workplace and equal opportunity employer. Qualified applicants will receive consideration for this position without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. To request assistance in completing this application, please call 800.220.1900 and ask for Human Resources. Veterans encouraged to apply.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . About the Role: We are seeking an SME for Data Center Commission and Quality. This role demands direct knowledge of data center construction, with a strong focus on MEP systems. Working directly with CoreWeave project coordination members, you will ensure projects across the CoreWeave portfolio are completed on time and to the highest quality standards. Responsibilities include overseeing the installation and testing of components and systems, including mission-critical systems such as generators, UPS systems, electrical distribution equipment, redundancy protocols, and cooling systems such as chillers and CDUs. This is a remote-eligible position with 50% travel required. Candidates must reside in or near the Northern Virginia, Dallas, Richmond, Virginia, Livingston, New Jersey, or Atlanta, Georgia regions. What You'll Do: • Operate with safety at the forefront of all construction initiatives., • As necessary, collaborate with general contractors, trade partners, and vendors., • Serve as a liaison between clients and internal teams, facilitating communication during commissioning activities., • Review all written documentation, commissioning, and quality-related information., • Assist in developing, reviewing, and implementing commissioning plans as needed., • Assist in coordinating and attending pre-construction commissioning meetings., • Attend construction progress and pre-installation job-site meetings to gather relevant information., • Review meeting minutes for necessary revisions and assist in resolving design-intent discrepancies., • Inspect field installations and witness functional tests; conduct site visits as necessary., • Witness the execution of commissioning tests., • Travel to sites, client meetings, and training as required., • Participate in developing reports that define project progress, problems, and solutions for leadership teams and clients.Who You Are:, • 5+ years of experience in MEP (Mechanical, Electrical, and Plumbing) commissioning, with a preference for experience in data centers or critical facility environments., • Comprehensive understanding of data center infrastructure, including Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and complex MEP building systems., • Familiarity with local building codes and industry-standard frameworks, including NEC, NFPA, IEEE, and ASHRAE., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook) and experience with industry-standard commissioning software or digital platforms., • Demonstrated ability to manage multiple projects simultaneously, maintaining high organizational standards and meeting strict project deadlines., • Self-directed professional with a proven track record of driving complex processes to completion and ensuring accountability across the project lifecycle., • Ability to develop and maintain effective professional relationships with contractors, clients, and cross-functional internal teams., • Direct experience in the coordination, commissioning, or quality assurance of electrical and low-voltage equipment., • Possession of a valid driver's license and a motor vehicle record that meets company insurability standards., • Willingness to travel up to 50% of the time and the ability to respond to emergency communications outside of standard business hours as required. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $143,000 to $191,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility).. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description About the Role: We’re seeking a creative and technically skilled Associate Designer to join our Lounge and Fully Fashioned Knits team. In this role, you’ll support the design and development of new products, contributing to both seasonal collections and ongoing style improvements. You’ll work closely with cross-functional partners in Technical Design, Product Development, and Production to bring each concept from sketch to finished prototype. This position is an individual contributor role that offers hands-on experience across the full design process, from CAD sketching and tech pack creation to color and material selection. It’s a great opportunity for someone eager to grow their skills in apparel design and gain exposure to lounge, sleep, and knitwear categories. What You’ll Do: • Assist in creating product designs and achieving desired style, appearance, and fit characteristics for new and existing products., • Produce CAD illustrations, technical sketches, and detailed tech packs using Centric PLM and Adobe Creative Suite., • Contribute to concept development, color stories, fabric selection, and trend research., • Shop the retail market for inspiration and stay current on lounge and knitwear trends., • Partner closely with Technical Design to ensure the proper fit, function, and aesthetic of prototypes., • Support design hand-offs, sample reviews, and design documentation., • Collaborate with team members to meet deadlines and maintain brand design standards. Experience & Skills: • Bachelor’s degree in Fashion or Apparel Design, or equivalent experience., • 2–3 years of design experience, ideally in lounge, sleepwear, or knit categories., • Strong CAD illustration skills and proficiency in Adobe Illustrator and Photoshop., • Experience with tech pack creation and understanding of garment construction (lounge, sleep, fully fashioned knits)., • Familiarity with Centric PLM and the product development lifecycle., • Excellent attention to detail and ability to meet tight deadlines in a fast-paced environment. Soft Skills: • Detail-oriented, proactive, and organized., • Easy-going and collaborative, comfortable working cross-functionally.

Job DescriptionBenefits: • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Hybrid work arrangement, with minimum four (4) days per week at the offices of the Authoritys Engineering Department - Contracts Unit located at 2 Montgomery St., Jersey City, NJ and no more than one (1) day per week remote, unless otherwise directed by the Authority or the PA Agreement Project Manager., • Prepare Contract books (project manuals) which contain complete project-specific administrative and technical requirements for construction contracts and maintenance contracts., • Coordinate scope of work requirements with all appropriate Engineering Design Division disciplines to ensure project-specific scope is intelligibly included in custom prepared contract books, while conforming to all Authority procedures, Engineering QA-QC standards, and Contracts Unit standards., • Provide contractual and procedural guidance to Project Principals, Engineer of Projects, Project Managers and others, and provide review comments for coordination and bid quality of Contract book elements., • Provide guidance on determination on the type of contract (lump sum, unit price, combination, or other) and develop project-specific payment provisions., • Prepare soft cost budgets for performing Contracts Unit tasks., • Remain in control and abreast of a diverse workload, stay within budget, conform to established project delivery schedules., • Assist the project delivery team with the development of staging requirements, milestone completion requirements, hours of work and other custom contract conditions where required., • Resolve contractual and technical comments and issues with Engineering staff and other Authority departments., • Collaborate with PA Law Department on contracts with unique circumstances, and resolve Law comments., • Handle vetting and distribution of contract documents for agency-wide reviews, and perform reviews using Authority applications, including Blue Beam Revu., • Respond to bidder questions during the Bid period, vet responses provided by other internal staff, guide Project Principals on correct procedures and protocols., • Guide Project Principals in preparation of Addenda, by advising, reviewing, correcting, then issuing for release to bidders., • Ability to pass a Secure Worker Access Consortium (SWAC) personnel background screening at a High Level and ability to comply with Authority policies on information security., • Possess a Bachelor of Science degree in Engineering or Architecture or a related technical degree, from an accredited college or university., • Have five (5) years minimum experience in the development, preparation, review, and delivery of contract documents for bidding, for multidisciplinary Architecture/Engineering construction projects, including administrative contract provisions (front end or general contract requirements) and technical contract provisions (technical specifications)., • Have demonstrated ability to meet schedules and budgets for project deliverables., • Have demonstrated ability to use Microsoft Office suite at an intermediate or better proficiency, and ability to, without difficulty, learn and use required computer software, such as Bluebeam Revu, custom SharePoint applications and other custom PA systems., • Have strong interpersonal, written, oral and collaboration skills, ability to work mostly independently with guidance, resolve contractual issues, ability to give and to follow clear directions, have proficient technical writing skills., • Demonstrated knowledge of construction documents organization per Construction Specifications Institute (CSI), or possessing CSI certifications (CDT, CCS, CCCA) is a plus. Flexible work from home options available.

Job Description CAD Production Drafter / Engineer – Custom Cabinetry & Millwork Newark, NJ $80,000–$120,000 Schedule: Monday–Thursday: 7:30 AM – 4:30 PM Friday: Winter until 12:00 PM | Summer until 1:00 PM If you can take a design concept and turn it into clean, buildable, production-ready drawings, this role gives you real ownership. About the Role We're hiring a CAD Production Drafter / Engineer to support custom cabinetry and millwork projects from concept to shop floor. This is not a design-only position. You will translate architectural plans and interior concepts into accurate shop drawings, part breakdowns, and CNC-ready files that drive efficient production. Your work directly impacts how smoothly projects move through the shop. You will sit between design and manufacturing and be accountable for getting it right before it hits production. What You'll Own • Produce detailed shop drawings and complete production documentation, • Build 3D models and part breakdowns from architectural drawings and sketches, • Generate CNC-ready files including nested layouts and DXF outputs, • Translate design intent into accurate, buildable components, • Coordinate with project managers, CNC operators, and shop leadership, • Specify hardware and construction details, • Maintain drawing standards and organized part libraries, • Identify and solve technical issues before they impact the floor Must-Haves • Experience drafting for cabinetry, millwork, woodworking, or related manufacturing, • Strong working knowledge of 2D/3D CAD software (AutoCAD or similar), • Solid understanding of cabinet construction, joinery, and production flow, • Ability to convert architectural drawings into precise, production-ready outputs Nice-to-Haves • Exposure to CNC panel processing or nesting workflows, • Experience generating CAM files or supporting CNC programming, • Background in custom residential or commercial buildouts, • Hands-on shop, fabrication, or installation experience What Success Looks Like First 90 Days • Producing accurate shop drawings with minimal revision, • Comfortable coordinating directly with shop leadership, • Delivering clean CNC-ready files that run efficiently First 6 Months • Independently managing multiple active projects, • Reducing shop-floor questions through clear documentation, • Improving drawing standards and production accuracy If you have most of this experience and are confident you can take ownership of the drafting process, we'd like to hear from you. Strong adjacent manufacturing backgrounds are encouraged to apply. Email Resume: Apply Online: Refer a friend, get up to $1000!

Job DescriptionDescription: Job Title: AIA Billing Company: Newark Fire Sprinkler Corp Location: Newark, NJ Job Type: Full Time About Us: For over 30 years, Newark Fire Sprinkler Corp. has protected lives and property with top-tier fire sprinkler system design, installation, and service. What sets us apart is our people-first culture – built on trust, teamwork and collaboration. We’re a close-knit, hardworking team that values growth, knowledge-sharing, and doing things the right way. Position Summary: The AIA Billing Specialist is responsible for preparing, submitting, and managing monthly AIA-style payment applications for construction projects. This role ensures accurate and timely invoicing using G702/G703 forms, tracks contract values and change orders, and coordinates with project managers and clients to secure payment. Key Responsibilities: · Prepare monthly progress billings for fire sprinkler installation projects using AIA G702 and G703 form · Review contracts, change orders, and schedules of values to ensure proper billing allocation · Coordinate with project managers to verify percentage of completion and project milestone · Monitor retainage, lien releases, and required compliance documents (e.g., insurance, certified payroll if applicable) · Communicate with general contractors regarding billing issues, approvals, and payment schedule · Track and follow up on outstanding accounts receivable · Maintain accurate documentation for all billings, change orders, and supporting backup · Assist with monthly close processes and support year-end financial reporting · Ensure all billing practices follow industry standards and project-specific requirements What We Offer: • Pay: Competitive pay and benefits package, • Medical Benefits: Health, dental, and vision insurance, • Top-Tier Benefits: 401(k) with company match, • Generous PTO: Paid time off and holidays, • Professional Growth: Opportunities for advancement and training Requirements: Qualifications • Proficient in Microsoft Excel and construction billing/accounting systems (e.g., Sage 300, Foundation, Viewpoint, QuickBooks for Contractors), • Highly organized, with the ability to manage multiple projects and deadlines, • Strong attention to detail and accuracy in financial reporting, • Excellent communication skills to interface with internal teams and external clients, • Understanding of retainage, lien waivers, and compliance documents relevant to fire protection work Preferred Qualifications • Familiarity with fire sprinkler systems, NFPA standards, or related construction terminology, • Experience with certified payroll and prevailing wage contracts (a plus), • Knowledge of subcontractor/vendor billing processes

Job Description Senior Bridge Structural Engineer - Hudson Tunnel Project | New York / New Jersey About the Company & Project Our client is a leading global construction consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Senior Bridge Structural Engineer for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. As the Senior Bridge Structural Engineer, you'll play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our clients purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Lead the design and technical review of bridge and structural components, ensuring compliance with codes, standards, and project requirements, • Provide constructability, feasibility, and value engineering input to optimize bridge design and sustainability, • Review drawings, specifications, and submittals from engineers and contractors, ensuring integration with adjacent project elements, • Offer technical support during construction, resolving field issues and overseeing bridge-related activities, • Monitor construction progress, review RFIs and change orders, and ensure timely delivery of bridge milestones, • Implement and support quality assurance plans, including audits, inspections, and testing compliance, • Maintain detailed records of inspections, test results, and acceptance documentation for structural works, • Contribute to schedule and cost control efforts, and support risk identification and mitigation strategies, • Prepare technical reports and participate in coordination meetings with project managers, engineers, and stakeholders, • Bachelors or Masters degree in civil, structural, or related engineering field, • Professional Engineer (PE) license required, • Minimum 10 years of bridge and structural engineering experience, ideally on large-scale infrastructure projects, • Familiarity with federally funded projects and regulatory compliance, • Advanced expertise in bridge design, analysis, and construction methods, • Proficiency in structural engineering software and design tools, • Experience with QA/QC processes, testing, and inspection for bridge structures, • Strong organizational, analytical, and problem-solving skills, • Effective communicator with ability to lead multidisciplinary teams and produce technical reports Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without regard to race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status. Why this is a Great Opportunity • Full-time position with competitive compensation, • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Collaborative and supportive work environment with the opportunity for growth in your career, • Comprehensive benefits package including medical, dental, vision, life insurance, accidental death and dismemberment, disability Insurance, 401(k).

Job Description Department: Real Estate and Construction Reports To: Vice President of Real Estate About Civic Builders: Civic Builders is the nation’s leading nonprofit lender and developer of public charter schools. Since 2002, the organization has invested more than $2.1 billion into over 100 schools, bringing high-quality educational opportunities to more than 55,000 students annually. About the Position: Civic Builders is seeking a Senior Director, Real Estate Finance, to lead complex financing, investment strategies, and underwriting decisions that support charter school development projects across the East Coast. This is a senior, externally facing role for a finance leader with strong judgment, technical depth, and experience structuring sophisticated real estate transactions. Reporting to the VP of Real Estate, the Senior Director will lead transactions from underwriting through closing, working closely with senior leadership to advance financing strategies, manage capital relationships, and support Civic’s growing development pipeline. This role requires a high degree of independence and the ability to navigate complexity with both strategic thinking and strong execution. The Senior Director will represent Civic with school leaders, lenders, government partners, and mission-aligned capital providers, helping shape transactions that expand access to high-quality public education through thoughtful real estate investment and development. Responsibilities: Real Estate Finance, Underwriting & Transaction Leadership • Lead underwriting, financial modeling, capital stack design, and negotiation for real estate development transactions through closing and post-close compliance, • Develop project-level and portfolio-level financial models assessing financing feasibility, debt service coverage, loan-to-value, cash flow projections, and sensitivity scenarios, • Partner with the VP of Real Estate, CEO, and Investment Committee on projects ranging from $10M to $50M+, providing clear recommendations on portfolio optimization, risk minimization, return yields, and financing strategy, • Lead the sourcing, structuring, and compliance process for New Markets Tax Credit (NMTC) allocations into Civic’s real estate development projects, • Structure and close complex transactions involving tax-exempt bonds, blended debt and equity, credit enhancement, and other leveraged financing sources, • Prepare investment memos, credit analyses, and financing recommendations for senior leadership, board members, and external partners, • Negotiate financing and partnership terms with developers, charter school partners, lenders, bond counsel, government agencies, and other stakeholders, • Identify and evaluate financing opportunities aligned with Civic’s development and growth strategy, • Drive refinancing, stabilization, lease-up, and tenant buyout strategies that protect Civic’s financial interests and long-term impact, • Serve as a strategic thought partner to the VP of Real Estate and senior leadership on market expansion, financing tools, and long-term capital strategy, • Contribute to strategic initiatives, including new financial products, green building finance, and geographic expansion, • Strengthen underwriting tools, transaction processes, and internal standards as Civic’s portfolio grows, • Collaborate with Accounting & Finance, Portfolio Management, and Real Estate teams to proactively manage transactions and emerging risks, • Represent Civic externally to senior partners, investors, board members, and clients in meetings, negotiations, and industry settings, • Guide charter school clients through project feasibility and transaction milestones, • Manage school client relationships and engage school leadership at both staff and board levels to support successful financing outcomes, • You are a strategic finance leader with strong technical acumen and the ability to structure complex real estate transactions with confidence and precision, • You are highly self-directed and comfortable operating with significant autonomy while knowing when to elevate key decisions and risks, • You are a persuasive negotiator who protects Civic’s financial interests while advancing mission-driven outcomes, • You are energized by deal-making and enjoy structuring creative, complex financings that deliver meaningful impact for schools and the broader charter sector, • You are analytical and detail-oriented, with strong judgment under pressure and a practical approach to solving complex problems, • You are highly organized and able to manage multiple priorities and transactions simultaneously, adapting as needed and communicating effectively with internal and external stakeholders, • You are a collaborative leader who values teamwork, supports the growth of colleagues, and builds strong long-term partnerships across lenders, operators, and public sector stakeholders Required • Bachelor’s degree in Finance, Real Estate, Business, Urban Planning, or a related field, • 8+ years of progressive experience in real estate finance, community development finance, investment, or lending, with demonstrated responsibility for large-dollar transactions, • Advanced financial modeling, underwriting, and credit analysis skills, including expert Excel capability, • Demonstrated experience structuring and closing complex transactions with layered financing sources, • Deep understanding of real estate finance structures (loans, lease-to-own, NMTCs, tax-exempt bonds, historic tax credits, etc.), • Outstanding project management, organizational, and interpersonal skills, • Strong written, verbal, negotiation, and relationship management skills with the ability to influence senior executives, board members, and external partners, • Excellent negotiation, relationship-building, and problem-solving skills, • Experience with charter school facilities, nonprofit real estate or mission-driven developers, community development finance, or impact investing, • Direct experience in charter school facilities finance from the borrower, developer, operator, lender, or investor side, with borrower-side experience strongly preferred., • Track record of success in entrepreneurial, fast-paced, mission-driven environments, • Familiarity with the regulatory, operational, and financial dynamics of charter school operators Civic Builders offers a competitive benefits package that includes health, dental, vision, life, and disability insurance; generous PTO and holidays; paid parental leave; professional development support; and participation in Civic’s 401(k) plan with employer match. Civic Builders offers a hybrid, collaborative work environment, with New York Metro-based team members working in the NYC office two days per week and remotely for the remainder of the week. Flexible work arrangements may be considered for the right candidate. Candidates must have permanent authorization to work in the United States. Start Date: Civic Builders is seeking candidates who can start as soon as possible; flexible for the ideal candidate. We are an Equal Opportunity Employer: Civic Builders is an equal opportunity employer and welcomes candidates from diverse backgrounds and perspectives. Civic Builders provides employees with a safe and welcoming environment free of discrimination and harassment. As an equal opportunity employer, we prohibit any unlawful discrimination against a job applicant on the basis of their race, color, religion, gender, gender identity, gender expression, sexual orientation, national origin, family or parental status, disability, age, veteran status, or any other status protected by the laws or regulations in the locations where we operate. To Apply: We encourage you to apply even if your experience is not a 100% match with the job description; we will consider people from a variety of backgrounds and career experiences. Applications will be reviewed on a rolling basis. Powered by JazzHR Zslatdrc3k

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at the Role: The Staff, Energy Operations is a senior, development-facing role within CoreWeave's Data Center Development organization. This position is responsible for owning the site-level utilities path required to advance data center developments from early diligence through development readiness, construction alignment, and delivery to Operations — from dirt to blinky lights. This role owns the end-to-end execution of site-specific utility workflows, ensuring every project has a clear, validated, and de-risked path to capacity. The role operates hands-on with all utilities, developers, and internal teams to manage utility feasibility, delivery timelines, cost assumptions, and execution risk. You will work closely on utility execution, schedule, budget, local relationships, government affairs, and internal grid-planning teams, which remain responsible for policy, regulatory engagement, and long-range system planning. What You'll Do:Site-Level Utility Ownership (Hard Development Gate) • Own site-specific power feasibility and validation for all Development opportunities., • Serve as a hard Development gate — no site advances without a confirmed, executable utilities path., • Validate availability, delivery timelines, upgrade requirements, costs, and risk profiles.Utility Coordination & Execution, • Act as the primary site-level technical point of contact with utility providers., • Drive overall utility coordination, design reviews, infrastructure planning, development budgeting to turn over execution., • Hold utilities and external partners accountable to agreed delivery schedules and milestones., • Support on-the-ground engagement internal and external teams with utilities, municipalities, and local stakeholders.Alternative Power & Acceleration Strategies, • Support alternative power structures where required to accelerate delivery or mitigate risk., • Translate alternative power paths into a clear schedule, cost, and execution impacts for Development decision-making.Cross-Functional Integration, • Serve as the connective tissue across Development, Operations, Finance, Legal, Gov/Tax, Sustainability, Design, and Construction., • Ensure power costs, timelines, and risks are accurately reflected in:, • Development schedules, • TCO and financial models, • Executive-level materials supporting go / no-go decisionsConstruction & Operations Alignment, • Partner closely with Construction teams during Development and execution to:, • validate construction schedules and sequencing,, • Align power delivery milestones with build and commissioning plans,, • Roll up all utility-related outputs through the Principal of Development, who serves as the single point of contact by jurisdiction., • Maintain a single source of truth for:, • all site utility status,, • delivery timelines,, • risks and mitigations across the Development pipeline., • Prepare clear, executive-ready materials (presentations, summaries, risk readouts) for leadership review and decision-making.Contracting & Legal Support, • Partner with Legal to support negotiation and execution of: Utility Service Agreements, Interconnection Agreements, and Easements and site-specific power rightsDevelopment-Stage Technical Due Diligence, • Take evaluation package from power teams, translate to site-specific deliverables and schedule for all utility infrastructure post diligence., • Pressure-test assumptions to ensure Development schedules remain executable through construction and Ops handoff.Travel Requirements:, • Willingness and ability to travel regularly (25–40%), including:, • site visits and jurisdictional reviews,, • utility and municipal meetings,, • partner and developer coordination,, • collaboration with Design, Construction, and Operations teams., • Comfortable serving as the on-the-ground Development representative for ALL utilities.Who You Are:, • 10+ years of experience in power, utilities, or energy infrastructure supporting large-scale data center, industrial, or infrastructure developments., • Proven experience aligning utility infrastructure delivery with complex construction sequencing and master project schedules., • Demonstrated expertise in the full project development lifecycle, including early-stage supporting internal teams feasibility assessments, due diligence, and execution planning., • Extensive experience managing direct relationships and negotiations with U.S. utility providers, specifically regarding large-load (100MW+) interconnections across multiple jurisdictions., • Strong understanding of utility tariffs, interconnection processes, and site-level power cost modeling., • Extensive experience supporting the full construction lifecycle, from project inception through commissioning and transition to operational stabilization., • Direct experience in utility operations or a utility-facing execution role with a proven track record across national or multi-regional U.S. markets., • Technical familiarity with complex construction schedules, procurement of long-lead electrical equipment, and practical constructability assessments., • Demonstrated mastery of project management fundamentals, including the ability to mitigate risks and manage critical-path dependencies across multiple workstreams., • Experience developing high-level reporting, presentations, and strategic content to facilitate data-driven decision-making for executive leadership., • Professional exposure to Joint Venture (JV) frameworks or capital-partner development models within a real estate or infrastructure context. Wondering if you're a good fit? We believe in investing in our people and value candidates who can bring their diverse experiences to our teams – even if you aren't a 100% skill or experience match. Here are a few qualities we've found compatible with our team. If some of this describes you, we'd love to talk. • You love to translate complex utility and interconnection processes into executable development plans that keep projects moving., • You're curious about how power markets, grid constraints, regulatory shifts, and commercial structures shape site feasibility and long-term infrastructure strategy., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $161,000 to $215,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility) What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Salary: $105,000 - $120,000 Other Forms of Compensation: Yearly Bonus Opportunity A family of companies and experiences As the leading foodservice and support services company, Compass Group USA is known for our great people, great service and our great results. If you’ve been hungry and away from home, chances are you’ve tasted Compass Group’s delicious food and experienced our outstanding service. We have over 284,000 US associates who work in award-winning restaurants, corporate cafes, hospitals, schools, arenas, museums, and more in all 50 states. Our reach is constantly expanding to shape the industry and create new opportunities for innovation. Join the Compass family today! great people. great services. great results. Each and every individual plays a key role in the growth and legacy of our company. We know the next big idea can come from anyone. We encourage developing and attracting expertise that differentiates us as a company as we continue to raise the bar. Job Summary Position Overview We are currently seeking qualified candidates for an immediate opening to join our team as a lead construction consultant in the New York City Metro. This full-time position is anticipated to be remote, with regular travel to project sites and client locations serving several projects in Manhattan and some requiring state and domestic U.S. travel. The lead construction consultant is accountable for the successful delivery of technology consulting projects during the contract administration phase, leading engagements with minimal oversight. This role verifies that infrastructure, audiovisual systems, and structured cabling installations align with contract documents, design intent, and industry standards. Serving as a link between design and field execution, the construction consultant leads site observation, validation, and commissioning activities; coordinates with AV integrators and contractors; and oversees RFI and submittal workflows to resolve issues early and reduce delivery risk. In addition to project delivery, the role contributes to the development and improvement of internal construction‑phase processes and provides guidance and mentorship to less‑experienced team members. Through disciplined oversight, clear communication, and a hospitality‑forward approach, the role ensures systems are technically sound, operationally ready, and aligned with client expectations. KEY RESPONSIBILITIES Coordination and Communication AV Integrator Management: Lead coordination with AV integrators and contractors to facilitate installation, testing, and handover of technology systems. Own punch list development, tracking, and issue resolution. Lead AV integrator coordination meetings and provide clear direction, documentation, and follow‑up. RFI and Submittal Management: Lead the receipt, review, and response of RFIs (Requests for Information) and construction‑phase submittals. Engage design and technical team members as needed, ensure technical accuracy and clarity of responses, maintain RFI and Submittal logs, and drive timely resolution and accountability. • Contract Administration Coordination: Serve as the primary point of coordination between design teams, contractors, and project stakeholders to resolve field issues and maintain alignment between construction activities, installation execution, and technology goals., • Client & Team Communication: Lead communication of project status, field conditions, risks, and solutions to internal teams and clients. Provide confident technical guidance during construction, testing, and commissioning, and support less‑experienced team members in client‑facing interactions., • Technical Documentation & Reporting: Oversee the preparation and submission of site observation, testing, and commissioning reports. Ensure documentation quality, consistency, and completeness, and maintain accurate records of field conditions, test results, and system performance. Validation and Verification Site Observation & Compliance: Conduct regular site visits to verify infrastructure, AV, and structured cabling installations comply with construction documents and specifications. Document findings, identify deviations, and recommend corrective actions. Structured Cabling Observation: Observe and document structured cabling installations, ensuring alignment with design intent and industry standards. Audiovisual Verification: Develop and execute AV test plans and manage validation testing of audiovisual (AV) systems at both offsite and on‑site facilities on behalf of our clients. Carry out comprehensive testing and troubleshooting to confirm system performance and functionality. Verify that installation and operation of technology systems adhere to construction documents and project specifications. Quality Assurance: Review installation practices and completed work for adherence to standards. Support QA of AV and structured cabling installations. Operational readiness support: Support system turnover and initial adoption by assisting with client training sessions, operational handoff activities, and early‑stage issue identification, ensuring technology systems are understood, usable, and ready for day‑one operation. Internal Responsibilities • Team contribution: Contribute to Waveguide’s internal knowledge base and consulting community by sharing lessons learned, best practices, and technical insights from construction‑phase engagements., • Process ownership and improvement: Take ownership of construction‑phase consulting workflows, proactively identifying opportunities to improve observation practices, testing rigor, documentation quality, and coordination efficiency. Challenge assumptions and recommend improvements that increase consistency, reduce rework, and strengthen delivery outcomes., • Professional Growth: Pursue ongoing professional development and contribute to the organization’s knowledge base as a subject matter expert (SME)., • Travel: This position requires frequent local and domestic and occasionally international travel, sometimes up to 60% (combination of local day trips and some domestic and international travel), to perform site observations, attend coordination meetings, and support project delivery., • Responsible Use of AI Tools: Ensure responsible use of web-based AI tools, with a strong understanding of and adherence to data protection and privacy best practices.QUALIFICATIONS, • 6 to 8 years of relevant professional experience managing professional AV/IT projects, preferably as an independent consultant, • Four-year or higher degree in a relevant technical field (BSEE), • AVIXA Certified Technology Specialist (CTS) professional certification, CTS-I preferred, • Demonstrated construction-phase technology consulting experience, including RFI responses, site observations, field issue identification, contract administration, and clear documentation such as observation and commissioning reports, issue logs, and test results., • Proven ability to develop and execute audiovisual system test plans, commission performance, and resolve field issues while balancing design intent, constructability, schedule, and client expectations., • Experience overseeing AV integrators and specialty contractors, reviewing installation quality, managing punch lists, and coordinating during testing and turnover, with strong knowledge of industry standards and best practices (AVIXA, BICSI, TIA, manufacturer guidelines)., • Comfort operating in client-facing construction and commissioning environments, delivering technical guidance with professionalism, confidence, and a hospitality-forward mindset., • Suitable environment for audio and video calls, remote work anticipated when not traveling Required Core Competencies • Strong computer skills with proficiency in all MS Office applications, • Advanced proficiency in MS Suite, Bluebeam, and relevant AI tools., • Ability to perform basic mathematics in a business environment, • Strong understanding of commercial/institutional technology applications and operations and their integration within building design and construction environments, including audio systems, video display technology, unified communications, digital signage, networked signal distribution, complex automation and control, and typical building systems such as HVAC, electrical, lighting, building controls, and security., • Commitment to relevant ongoing professional development and technical training, • Ability to manage multiple projects and deliverables and shift priorities as necessary, • Ability to communicate clearly both verbally and in written form Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. We encourage applicants with a criminal history (and driving history) to apply. Compass Corporate maintains a drug-free workplace. Applications are accepted on an ongoing basis. Associates at Corporate are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Paid Parental Leave, • Holiday Time Off (varies by site/state), • Personal Leave, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. Certain positions may require Florida Level 2 background screening. Details: Req ID: 1515988 Compass Corporate XUE BAI [[req_classification]]

Job Description About MidPen At MidPen, we build communities that change lives. Since 1970, we have been committed to our mission: to provide safe, affordable housing of high quality to those in need; establish stability and opportunity in the lives of residents; and foster diverse communities that allow people from all ethnic, social, and economic backgrounds to live in dignity, harmony, and mutual respect. We develop affordable housing, provide professional property management for all our communities, and coordinate robust onsite support programs that help residents thrive. We are active in 12 Northern California counties and have earned recognition as one of the nation's leading non-profit developers and stewards of affordable housing. Our current portfolio of more than 130 properties is home to 20,000 working families, seniors, and people with special needs. We take pride in delivering affordable housing solutions, and we invite you to join us on a journey toward social, economic, and racial equity. MidPen is, once again, proud to be certified as an official Great Place to Work® in 2025. Location: Greater Bay Area Director, Facilities & Capital Projects Reporting to the Senior Director of Risk Management & Facilities, the Director of Capital Projects & Facilities is a key member of the Property Management leadership team, responsible for preserving and sustaining MidPen's assets. This role partners closely with Property Management, Housing Development, Asset Management, Legal, Accounting, and external stakeholders. The Director oversees the Area Maintenance Lead (AML) cohort and Facilities Coordinators, directly supervises two Regional Maintenance Managers and one Senior Facilities Coordinator, and provides high-level support and training to field maintenance staff. Responsibilities • Provide portfolio-level oversight of facilities quality, efficiency, and coordination, • Lead and develop Area Maintenance Leads supporting assigned portfolios, • Establish preventive maintenance standards and oversee related policies, procedures, and workflows, • Mentor maintenance staff and support training, operational best practices, and continuous improvement, • Support regulatory and physical inspections to ensure compliance and smooth property operations, • Conduct root cause analyses and implement corrective training as needed, • Manage all phases of capital projects, from planning and design through construction and closeout, • Partner with Asset Management on capital planning, goal-setting, and tracking, • Ensure projects meet Physical Needs Assessments, budgets, timelines, and quality standards, • Oversee deferred maintenance planning and incorporation into long-term capital plans, • Maintain strong relationships with regulatory agencies, vendors, and internal stakeholders, • Contract Procurement, • Oversee facilities procurement to balance quality, efficiency, and cost, • Ensure portfolio-wide vendor compliance, bidding support, and contract execution, • Serve as liaison to Development on building design and maintenance readiness, • Provide technical expertise during construction closeout, lease-up, and stabilization, • Ensure completion of annual safety inspections and related billing, • Provide ongoing OSHA and safety compliance training, • Support accident investigations and promote workplace safety initiatives To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the education, knowledge, skill, and/or ability required. Education and Experience • Bachelor's Degree in the field of Maintenance, Construction or Facilities Management preferred. Minimum of 5 years prior relevant industry experience and a minimum of 3 years prior supervisory experience, or an equivalent combination of education and experience., • Knowledge of preventive maintenance practices and familiarity with all building systems including electrical, plumbing, HVAC, flooring, roofing, structure, swimming pools, landscape maintenance, elevator operations, security and fire alarm systems, and storm water treatment retention systems, • Ability to anticipate maintenance issues, plan preventative measures and train others in the use of high-quality standards and procedures, • Thorough knowledge of OSHA regulations, environmental issues (particularly in relation to lead and asbestos regulations) and safe practices, • Ability to read and understand blueprints, • Ability to multi-task under pressure in order to meet competing deadlines, gather and analyze information, and solve problems skillfully and timely in a fast-paced work environment while maintaining ability to organize, and track document paper flow, • Ability to communicate professionally and effectively via phone and in writing with site staff and internal partners, and external vendors, • Proficiency using Microsoft Office (i.e., Excel, Word, PowerPoint, Access, Project, and SharePoint), • Intermediate to Expert Excel skills highly preferred, • Interest and/or background in the affordable housing industry preferred, • Constantly perform desk-based computer tasks, • Frequently sitting, • Occasionally stand/walk, reach/work above shoulders, grasp lightly/fine manipulation, grasp forcefully, use a telephone, sort/file paperwork or parts, lift/carry/push/pull objects that weigh up to 15 pounds, • Rarely twist/bend/stoop/squat, kneel/crawl, • This position is considered moderately to highly physical and requires a lot of standing, bending, lifting, and walking, • Able to stoop, kneel, carry, push and pull, ascend/descend stairs, climb on ladders, climb on roofs, and crawl in confined spaces on a regular basis, • The ability to lift and carry up to 50 pounds on a regular basis $164,000 - $184,500 Annual Salary - Pay based on applicable experience and qualifications Benefits and Compensation (see here for full details) • Health Insurance, • Dental, Vision, Life & Disability Insurance, • 403(b) Retirement Investment, • Employee Education Reimbursement Program, • Paid Parental Leave, • FSA for Childcare, Medical, and Commuter Benefits, • EAP Program, • Pet Insurance, • Paid Time Off, • Company Holidays MidPen Housing Corp. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We are committed to providing an inclusive and accessible hiring process. If you need a reasonable accommodation for any part of the application or interview process, please notify your recruiter. Consistent with its obligations under the law, MidPen Housing Corp. will provide reasonable accommodation to any employee with a disability who requires accommodation to perform the essential functions of his or her job.

Job Description The Opportunity We’re expanding and as our business grows and our product range broadens, we’ve found it necessary to make significant investments in our organization. Notably, we've completed our new 85,000 sq ft landmark facility which is designed from the ground up to facilitate innovation. Similarly, we’re investing in our people and are looking for someone who’s personally supportive of our customers and equally driven to deliver exceptional products for our market. We’re seeking an expert Technical Designer to transition new products from development into production. This role is one-part CAD/Gerber expert, one part fire fighter, and one-part analytical problem solver. This position reports directly to the Director of Manufacturing Engineering. We are dedicated to creating the absolute best apparel and gear products for our nation’s most elite war fighters right here in Brooklyn NY. Job Responsibilities • Problem solving: Use tech design skills to solve a wide variety of challenging problems related to the manufacturing of tactical apparel and gear products., • Design Analysis: Analyze product design tech packs, patterns and samples then provide feedback on design, construction details, proper techniques, and manufacturability., • Marker Making: Work with product designers, pattern makers, and production teams using Gerber Accumark to design efficient production markers for a wide range of sizes and products for high and low volume production of apparel and gear items., • Pattern Design and Development: Use Gerber and AutoCad to analyze/design patterns for manufacturability and high-volume production., • Process Development: Analyze complicated apparel and gear construction sequences, write manufacturing/work instructions conduct cycle time studies, calculate manufacturing metrics (throughput, scrap rate, OEE, etc.)., • Teamwork: Work with a cross functional team of tech designers, engineers, production staff, and product designers to create manufacturing solutions for high quality, high throughput production. Required Experience & Qualifications • Bachelor’s degree in fashion or apparel technical design or equivalent, • 1-5 years’ experience in fashion industry, apparel design, or similar, • Strong 2D/3D CAD Skills (Gerber, AutoCAD, Draftsight, Vstitcher, CLO/MD, Browzewear etc.), • Strong tech pack design skills: pattern development, garment construction, cut/trims list, BOM’s, • Demonstrated problem solving skills (design portfolio, products, etc.), • Highly relevant skills or experience we are interested in:, • Apparel manufacturing: Experience sewing, cutting, trimming, bonding, fabric welding, sealing, • Automated Sewing Systems: experience programing/troubleshooting pattern tackers, bar tackers, buttonhole, and other automated sewing systems (Juki, Brother, Jack, Sunstar etc.), • Tech Designer Skills: Pattern making, grading, BOM’s, fittings, construction details, Gerber, • Fashion Industry: Garment design, overseas manufacturing, vendor interaction,, • Sporting goods: climbing harnesses, footwear, rain gear, outerwear, Velcro, • Military Experience: knowledge of military apparel or gear design requirements and applications If you wish to be considered for the role, please apply directly via email to with your resume and cover letter. Company DescriptionThe Company Crye Precision has been designing and manufacturing apparel and equipment for America's fighting forces as well as domestic and international law enforcement groups for over 20 years. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We design, engineer, and manufacture all of our products here in the USA and have assembled a great team of over 200 dedicated individuals at our headquarters in the historic Brooklyn Navy Yard to fulfill that mission.The Company\r\nCrye Precision has been designing and manufacturing apparel and equipment for America's fighting forces as well as domestic and international law enforcement groups for over 20 years. We work hard to provide smart, high-performance, long-wearing gear for people who demand the best. We design, engineer, and manufacture all of our products here in the USA and have assembled a great team of over 200 dedicated individuals at our headquarters in the historic Brooklyn Navy Yard to fulfill that mission.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at You'll Do The Data Center Planning & Construction team at CoreWeave is responsible for delivering a rapidly growing portfolio of data centers and critical infrastructure projects that power our AI cloud platform. We own the full project lifecycle—from site due diligence and design through construction, commissioning, and turnover—while partnering closely with Finance, Operations, and Executive Leadership to scale our footprint responsibly. The Construction Cost Engineer will be the owner-side commercial lead across a portfolio of complex, large-scale developments, with a focus on data centers and mission-critical infrastructure. You will build and maintain the financial "source of truth" for your projects, ensuring clarity, accountability, and control over every dollar from pre-construction through closeout. About the role: As a Construction Cost Engineer, you are responsible for the financial integrity of CoreWeave's physical build-outs. You will manage capital expenditure (CAPEX) for large-scale data center projects, ensuring our ambitious AI infrastructure deployment timelines are met without budget overruns. You will act as the "financial conscience" for our Project Managers and General Contractors. In this role, you will: • Own portfolio-level cost planning, control, and forecasting across multiple concurrent projects., • Serve as a strategic advisor to Construction, Real Estate, and Finance leadership on budget, risk, and commercial strategy., • Implement scalable tools, processes, and reporting that support CoreWeave's rapid growth and evolving data center program., • Partner with internal and external teams to anticipate risk, drive value, and protect the company's capital while enabling speed.=Who You Are:, • Cost Planning, Budgeting & Forecasting, • Develop and manage project and program-level budgets, cost plans, and capital forecasts for data center and infrastructure projects., • Build and maintain cost models and benchmarks across markets, asset types, and delivery models., • Own Anticipated Final Cost (AFC) and Estimate at Completion (EAC) forecasting; identify variances and risks early with clear mitigation plans., • Cost Control & Financial Management, • Lead end-to-end cost control for multiple projects, including tracking commitments, accruals, and actuals., • Monitor WIP, invoices, payment applications, and change events to ensure accuracy, compliance, and timeliness., • Prepare and present monthly cost reports and dashboards covering budget, forecast, exposure, contingency, and cash flow., • Implement and refine cost control systems, standards, and KPIs that can scale across the portfolio., • Change Management & Risk Analysis, • Review and validate, and negotiate change orders, claims, and potential change events from GCs, subs, and vendors., • Maintain contingency, exposure, and escalation tracking, including log management and drawdown strategy., • Partner with Construction, Design, and Operations to identify cost risks, model impacts, and recommend mitigation paths., • Lead or support post-mortem cost analyses, lessons learned, and audits to continuously improve cost performance., • Vendor & Consultant Management, • Manage and direct third-party QS/cost consultants and other commercial partners; ensure deliverables are on time, accurate, and actionable., • Review estimates, reconciliations, value engineering proposals, and cost reports for quality and alignment with CoreWeave standards., • Hold vendors accountable for scope, budget, and reporting expectations, and escalate issues as needed., • Data, Reporting & Continuous Improvement, • Build and maintain cost databases, historical benchmarks, and market intel to inform future projects and negotiations., • Analyze trends to identify value-engineering and cost-optimization opportunities without compromising performance or reliability., • Develop standardized tools, templates, and dashboards (e.g., for AFC, exposure, contingency, cash flow) to drive consistency., • Contribute to playbooks and best practices for project controls across the Construction & Data Center Planning organization., • 5+ years in or data center project controls., • Advanced MEP (Mechanical, Electrical, Plumbing) Estimating: Specific expertise in pricing high-density power systems and specialized cooling., • Ability to develop life-cycle cost models that include GPU depreciation, power usage effectiveness (PUE), and carbon offset costs., • Proficiency in using historical data to create "Cost per Megawatt" or "Cost per Rack" benchmarks specifically for AI workloads., • Expertise in validating "AI-driven design changes"—such as mid-project increases in floor loading for heavier GPU clusters or power-train upgrades., • Proficiency as a power user of construction management platforms (Procore, Autodesk Build, or e-Builder)., • Advanced proficiency in Microsoft Excel (including VBA/Power Query) required for synthesizing and analyzing large-scale vendor spreadsheets., • Quantity Surveying Expertise: The ability to perform quantity take-offs from construction drawings to accurately verify vendor quotes., • High-Velocity Performance: Ability to consistently process critical approvals and perform cost analyses with the speed required by CoreWeave's high-velocity operating schedule., • Effective Communication and Presentation Skills: Ability to translate complex cost data into clear, concise narratives and recommendations for diverse audiences., • Proven ability to influence and align cross-functional teams and senior stakeholders using data-driven insights, sound judgment, and structured thinking., • Deep knowledge of:, • Core construction cost drivers, including MEP systems, structure, envelope, and siteworks., • Estimating tools and workflows (e.g., CostX, Bluebeam, On-Screen Takeoff, Excel-based models)., • Project controls best practices, including change management, contingencies, escalation, and exposure tracking.Preferred:, • Professional certifications such as RICS, CCP, FRICS, PMP, or equivalent., • Familiarity with project management and collaboration tools (e.g., Primavera P6, MS Project, Procore, NetSuite, or similar)., • Experience building or contributing to cost databases, benchmarking frameworks, or standardized reporting suites., • You treat every dollar like it's your own, but you also know when speed and opportunity outweigh marginal savings., • You're curious about how things are built, not just what they cost, and you enjoy being close to the work in the field., • You're energized by building structure, tools, and standards that others rely on., • You love taking ownership of complex financial integrity and serving as the "financial conscience" for large construction projects., • You're curious about continuously analyzing data to find new cost efficiencies and develop better project benchmarks., • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $134,000 to $179,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Fire Protection and Plumbing Engineer - New York, NY Our client is a Nationally ranked MEP Engineering Design firm that is a leader in the data center space. This role will be onsite at various Data Center projects during construction. They provide design and commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Candidate will work with customers to gather design requirements for plumbing and fire protection design projects supporting various mission critical / data center centric projects. Will translate requirements to internal design team, while providing updates to customer. Responsibilities: • Design Plumbing and Fire protection systems in mission critical facilities - trade floors, labs, control rooms, data centers, etc., • Fire and plumbing engineering and design of systems cold and hot water systems, non-potable water systems, water treatment, sanitary drainage and vent systems, storm drainage systems, all types of pumping systems, natural gas distribution systems, special plumbing systems; fire suppression systems; sprinkler piping design, including hydraulic calculations; Incipient fire detection systems, • Work on multiple projects simultaneously, • Coordinate with other internal engineering disciplines to achieve successful, functional and innovative designs for our clients, • Interact with other building disciplines (architectural, structural, electrical, mechanical, civil, controls, etc.) to ensure compatibility with the design intent, • Select equipment for use in building systems and write reports, • Provide specifications for all fire protection and plumbing materials and equipment, • Go to client site as needed for project meetings/site observations, • Perform field surveys at customer sites to document existing conditions and/or observation of construction activities, • Participate in client project requirement meetings and value analysis and basic cost estimating, • Conduct QA /QC / quality assurance and quality control on project, • Perform and oversee the performance of load calculations and system design using company standard software, and proprietary manufacturer software, • Develop Plumbing and Fire Protection Drawings, • Design and document Plumbing and Fire Protection systems, • Assist in the continued development and updating of standards and specifications for the plumbing and fire protection, • Familiarity with renovation and new work projects; appropriate codes, standards and industry best practices, • Prepare Contract Documents using Revit and AutoCAD, • Engage in the development of a design through sketches, electronic models, diagrams, and other visual formats Qualifications: • Bachelor's degree in Mechanical / Fire Protection / Plumbing engineering degree required, • Previous experience at an engineering consulting MEP firm a big plus, • PE; Professional Engineer a big plus, • Mission Critical Facilities Experience a huge plus!, • 5+ years' experience or more of plumbing design and fire protection systems, • Strong technical knowledge in fire protection and plumbing, • Excellent organization and planning skills, • A sound knowledge of engineering fundamentals, • Highly motivated, proactive and willing to take on new challenges, • Strong computer skills and skilled in software typically used in plumbing / fire protection design (i.e. hydraulic calculations, etc.), • Strong working knowledge of building, plumbing and fire codes, • Strong communication skills! Excellent written and verbal!, • Revit Experience is a must, • Ability to interface with clients After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionOffice Engineer-Nassau County Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves as being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include NYS Office of General Services, Dormitory Authority of the State of New York, NYC Health + Hospitals, State University of New York, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. POSITION – Office Engineer LOCATION – On Site-NYC QUALIFICATIONS: • Assist the Project Manager with project control activities including project document management, daily reports, meeting minutes, RFI tracking, contract document review, change order review and payment review., • Bachelor's degree in Civil Engineering, Construction Management, or other technical degree., • Candidate may perform site walkthroughs and some contractor coordination as needed., • Possess strength in project management software including Submittal Exchange, Procore, Bluebeam, etc., • 3+ years of Construction Management (buildings/pool/parks) experience., • Possess knowledge of the area of work you will manage-RFI tracking, contract document review, and scheduling applications., • Proficient knowledge of Windows/Outlook/Word/Excel., • Knowledge of codes preferable. Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR iTZsosYAid

Job DescriptionDescription: KS Engineers (KSE) is a mid-size engineering and surveying firm ranked among the leaders in design services. With seven offices across New York, New Jersey, Pennsylvania, and Connecticut, we have been delivering transportation and public infrastructure design and survey services for more than 35 years. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KSE is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Certified Arborist – Technician – Part Time Reports to: Project Manager General Qualities: • Is a proactive self-starter., • Meeting with clients to discuss their landscaping needs., • Can accomplish assigned tasks independently with guidance from their supervisor., • Ability to work in all weather conditions and at heights., • Completes timecard daily. Technical Responsibilities: • Certified to work on a NYCDOT projects on NYC Department of Park & Recreation (NYCDP&R) property, to inspect the removal and installation of trees and other vegetation, • Assesses and evaluates the condition of trees and other vegetation., • Maintains tree inventories., • Assessing soil and space requirements for new trees., • Proven work experience as an Arborist or similar role., • High school diploma/equivalent., • Must be a “Registered Consulting Arborist” by the American Society of Consulting Arborists (A.S.C.A), and must be familiar with NYCDP&R standards, specifications, and reporting OR, • Must possess certification from International Society of Arboriculture (I.S.A) with the minimum credential of Certified Arborist., • Completion of an accredited Arborist training program, • NYC Parks Department experience is desirable., • Previous experience as Certified Arborist is desirable. Physical & Work Requirements • Ability to climb trees and work at heights., • Ability to lift up to 60 lbs., • Ability to stand and walk for extended periods on active construction sites., • Willingness to work night and weekend shifts as required by the project. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description Construction Project Manager-Buffalo, NY Laland Baptiste, LLC is a certified minority and woman owned construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves on being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation primarily for public clients. Our clients include but are not limited to NYS Office of General Services, the State University Construction Fund, Dormitory Authority of the State of New York, NYC Health + Hospitals, , NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation and various municipalities throughout the state. As part of our continuous recruitment process, Laland Baptiste is seeking Project Managers for current or future project opportunities. The Project Manager will have project experience in Higher-Education, K-12, or Buildings Rehabilitation and willing to work full-time in the Western NY region of the State. Position Description: Project Manager-program management services for of a varied portfolio of projects including but not limited to project planning, tracking, schedule performance, and project controls for monitoring of various building construction and renovation projects. Project involvement will begin in the initial planning stages through completion to ensure that projects meet internal requirements, are within cost limitations, and are completed per schedule. Project values generally exceed $10 million in value. Minimum Requirements: • Bachelor’s degree in engineering, Architecture, Construction Management plus 8 years of relevant construction industry experience with public and/or private projects. Prior experience managing projects with a single value in excess of $10 million or experience managing a portfolio of project totaling this amount at a given time., • OSHA 30., • Valid Driver's License and reliable transportation., • Higher Education or K-12 experience a plus. Essential Skills:, • Demonstrated ability to read and comprehend plans, specifications, addenda, bid materials, contracts and related construction documents., • Proficient in project scheduling and evaluation of critical path work items., • Proficient in project cost management., • Excellent oral and written communications skills., • Demonstrated analytical and conceptual skills., • Ability to use project management software such as Procore., • Demonstrated ability to work independently and exercise sound judgment., • Proficiency in PC applications, such as Outlook, Excel, Word, and Bluebeam., • Demonstrated record of taking initiative., • Demonstrated management skills., • Demonstrated organizational skills and ability to prioritize., • Strong interpersonal and diplomacy skills if appropriate.Essential Functions:, • Establish regular lines of communication with the design team and contractor to evaluate the progress of the project., • Communicate regularly with owner and report on project progress., • Review and recommend payment for contractor invoices., • Review and recommend for execution any potential contract changes., • Assist with dispute resolution as project circumstances dictate., • Work with management, staff, clients, and contractors to manage all aspects of the project., • Ensure the retention and maintenance of records and files consistent with policies., • Efficiently manage assigned workload., • Develop, monitor, and maintain project records and reports. Input and manipulate data in applications and databases., • Coordinate with contractors, consultants, and clients to understand the project scope, evaluate construction tasks required, and to build, review and approve price proposals, and ensure the efficient flow of processes within the organization., • Schedule, manage and/or attend project-specific meetings. Participate in program-related meetings as required., • Read, interpret, and comprehend plans, specifications, reports, bid materials, contracts and other related documents. Recommend and evaluate approaches to resolving issues., • Assist with monitoring performance measures, goals, and objectives., • Develop, prepare, and maintain various program-related reports, spreadsheets, logs, charts and/or databases. dlDzYuAIq7

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description The Digital Revenue & Customer Experience Manager – Americas is a hands-on, managerial role responsible for defining, scaling, and governing Sika’s emerging digital revenue channel across the Americas Region reporting to the Digital Experience Director Americas together we will work on Sika’s digital transformation. This role will help Sika America’s DX team enhance and elevate the existing digital revenue pipeline—already implemented across the region—ensuring its expansion, adoption, and continuous improvement across the region Americas. At the same time, the role is responsible for building the CX governance model for the region, defining the standards, KPIs, and methodologies that will shape how Sika serves and retains customers in a digital-first world. This role defines the blueprint for how Sika grows, competes, and delivers value in a digital landscape offering the best customer experience. * Lead and develop the Digital Sales & Revenue (DSR) and U.S. Customer Experience teams across North America and Latin America, ensuring regional alignment and performance. * Own and scale the digital revenue channel in the Americas, accountable for adoption, results, process consistency, and cross-country coordination. * Design and govern the end-to-end digital revenue workflow, from lead capture and qualification through routing, follow-up, and sales handover. * Optimize and expand the digital revenue pipeline to improve conversion rates, revenue impact, and regional scalability. * Ensure unified, high-quality operation of digital tools (e.g., Salesforce, Pardot/MCAE) with standardized data, rules, and performance measurement. * Set and manage annual Digital Sourced Revenue targets, supported by regional dashboards tracking leads, pipeline, velocity, and revenue contribution. * Establish and standardize the Customer Experience (CX) framework across the Americas, including KPIs such as NPS, CSAT, CES, response time, and resolution metrics. * Integrate CX insights with digital revenue and service processes to enhance customer satisfaction and reduce friction across the full customer journey. * Drive digital transformation and continuous improvement through automation, innovation, pilots, and adoption of new tools and methodologies. * Lead multiple cross-functional, high-impact initiatives, translating regional insights into actionable plans with measurable business outcomes. Qualifications * Bachelor’s degree in Marketing, Business, Strategy, or a related field, with 5+ years of experience in digital revenue, lead management, CX, or commercial operations (preferably B2B/industrial). * Strong hands-on expertise with Salesforce (lead/opportunity workflows, reporting, dashboards) and Pardot/MCAE. * Proven experience leading regional or multi-country teams in complex business environments. * Deep understanding of digital lead lifecycles, qualification frameworks, scoring models, and routing logic. * Solid knowledge of CX methodologies and metrics (NPS, CSAT, CES), including building dashboards and scorecards. * Ability to design, govern, and scale complex operational processes across multiple markets. * Advanced analytical skills in pipeline performance, conversion metrics, revenue attribution, and SLA governance. * Effective cross-functional leader, collaborating closely with Sales, Marketing, Customer Service, and IT. * Strategic, adaptable, and self-driven leader with strong communication skills and the ability to influence without authority. * B2B digital or distribution models, and familiarity with global Group Marketing structures, helpful. * Spanish fluency a plus Additional Information Perks & Benefits • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Electrical Engineering Systems to lead electrical system design and execution for the Company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Electrical Distribution (facility and plant electrical architecture and integration)- Power Electronics (development of high-power converters and HTS magnet power supplies)- Electronics Systems Engineering (embedded control and instrumentation electronics, including custom PCBAs) This role will own the end-to-end delivery of electrical systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning power systems, power electronics, and embedded electronics, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the plant-level electrical architecture, including utility interface, substation and distribution design, grounding and protection philosophy, and power quality and reliability strategy., • Guide system modeling and simulation efforts including load flow, short-circuit, and transient studies, and ensure models remain consistent with evolving load envelopes and operating modes., • Lead integration strategy for compensation and storage assets such as STATCOM for load shaping, ride-through capability, and power recovery as applicable., • Own the technical interface to external engineering, procurement, and construction partners and utilities, including technical specifications, design reviews, and factory and site acceptance participation., • Oversee development of high-power converters and magnet power supplies, including topology selection, protection concepts, thermal strategy, and integration with embedded controls., • Develop test strategy and execution: prototype bring-up, staged-load validation, failure mode exploration, parameter tuning, and readiness evidence for integration., • Own hardware architecture for embedded control and instrumentation electronics that interface power conversion hardware, diagnostics, and control firmware., • Lead electromagnetic compatibility and noise mitigation strategy across boards, cabinets, and system integration boundaries., • Partner with systems engineering to translate device requirements into electrical requirements, interface definitions, and verification plans., • Run evidence-based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface definitions, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including electrical safety, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands-on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering or equivalent., • 10 or more years of relevant experience spanning two or more of the following: power systems, substation and distribution, power electronics, embedded electronics, controls hardware, industrial electrical infrastructure., • 5 or more years of engineering management experience leading multi-team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in electrical safety, high voltage and high-power engineering practices, and engineering standards and documentation discipline., • Strong cross-functional communication skills and experience driving technical decisions across physics, mechanical, controls software, safety, and program teams., • Experience delivering electrical systems for fusion, accelerator facilities, advanced nuclear, large industrial plants, or other high power research facilities., • Experience with utility interconnection processes, protection coordination, and power quality mitigation., • Experience with battery energy storage systems, static compensators, and dynamic load environments., • Experience establishing verification and validation processes and configuration control for hardware programs., • Familiarity with electromagnetic compatibility practices for high power switching environments and mixed-signal instrumentation., • Power system analysis: ETAP, DIgSILENT PowerFactory, PSCAD, SKM, CYME., • Power electronics simulation and design: PLECS, LTspice, Simulink, Altium or OrCAD., • Electronics design and lab: Altium or OrCAD, oscilloscopes, logic analyzers, power analyzers, electronic loads.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Immediate Start - Machine Learning Researcher (PhD) – Systematic Commodities Hedge Fund Moreton Capital Partners is rapidly expanding and seeking a talented Machine Learning Researcher to help design and improve the predictive models that power our systematic commodities trading strategies in our Mexico City Office. We trade global commodity futures using machine learning, alternative data, and institutional-grade portfolio construction. Our edge comes from research depth, disciplined experimentation, and robust production systems. This role is for candidates completing or having recently completed a PhD with a strong machine learning, statistics, or applied mathematics focus who want to apply advanced research in a real capital environment. You will work directly with the CIO and sit alongside a world class international quant research team to turn cutting-edge ML ideas into live trading signals. Your research will ship to production and directly impact portfolio returns. This is not a purely academic role. We're looking for someone ready to hit the ground running and available to start immediately. In return, we offer a competitive salary, substantial performance share, comprehensive benefits, incredible work environment and a relocation package to make the move seamless. What you will work on • Designing predictive models for cross-sectional and time-series commodity returns, • Developing new features from price, positioning, options, macro, and alternative datasets, • Improving signal robustness and reducing overfitting through rigorous validation, • Combining and blending multiple models into portfolio-level forecasts, • Regime detection, meta-models, and adaptive allocation frameworks, • Model diagnostics, explainability, and stability analysis, • Translating research ideas into production-ready implementations, • Formulate research hypotheses and test them using clean, time-aware ML pipelines, • Build and evaluate models (tree-based, linear, ensemble, deep learning, etc.), • Run walk-forward and out-of-sample experiments with realistic costs, • Analyze information coefficients, turnover, drawdowns, and risk-adjusted returns, • Design feature engineering frameworks and reusable research tooling, • Document findings clearly and communicate results to portfolio managers, • PhD (completed or near completion) in Machine Learning, Statistics, Applied Mathematics, Computer Science, Physics, Engineering, or related quantitative field, • Strong Python skills and experience with scientific computing stacks, • Deep understanding of statistical learning and model validation, • Experience working with large datasets and experimental pipelines, • Ability to move from theory to practical implementation, • Intellectual curiosity and strong problem-solving mindset, • Experience with financial markets or systematic trading, • Familiarity with time-series modelling or forecasting, • Experience with LightGBM/XGBoost, deep learning, or ensemble methods, • Exposure to portfolio construction or risk modelling, • Experience with cloud or distributed compute environments, • Direct impact: your research drives live trading capital, • Research freedom: explore ideas with fast feedback loops, • Real-world data: large, messy, multi-source datasets, • Small team: high ownership and rapid iteration, • Strong learning curve across ML, markets, and portfolio construction, • Market leading benefits, • High responsibility from day one, • Attractive compensation: Highly competitive base salary and annual bonus that scales as the business grows., • Relocation package to our Mexico City office, along with a competitive benefits offering that includes health and life insurance, a year-end bonus, and generous paid time off., • Positive, inclusive and encouraging work environment., • Close collaboration across a global team.

Job Description UNIVERSAL Technologies is seeking a Kahua Developer for an onsite role in Long Island City, NY to support enterprise construction management systems. Active LinkedIn preferred. May change to hybrid after 90 days. The selected consultant will be responsible for the design, development, integration, and ongoing support of Kahua-based applications and workflows that streamline project tracking, document management, approvals, and electronic signature processes. This role requires hands-on experience with Kahua KBuilder, API integrations, and workflow automation to ensure reliable and efficient construction project management operations. ***Candidate must be able to work for UNIVERSAL Technologies directly. WHO WE ARE UNIVERSAL Technologies is a certified Women-Owned Business Enterprise (M/WBE) specializing in IT consulting and professional services. We provide experienced technology professionals to government agencies and private-sector clients, delivering cost-effective solutions that drive innovation and operational excellence. WHAT WE OFFER At UNIVERSAL Technologies, we offer consultants the opportunity to contribute to high-impact public sector initiatives. Our team members work on enterprise platforms that support large-scale infrastructure programs while gaining exposure to collaborative, mission-driven environments. MANDATORY SKILLS/EXPERIENCE • Hands-on experience with Kahua software platform, • Experience developing applications using Kahua KBuilder, • Experience designing and implementing approval workflows using Kahua Approvals and Kahua Signatures, • Experience integrating DocuSign with Kahua workflows for secure electronic signature processing, • Experience utilizing Kahua APIs and integrating with external APIs for workflow automation and data exchange, • Experience developing DevExpress reports within KBuilder, • Experience supporting document management solutions and automated approval processes, • Experience providing production support and troubleshooting workflow, API, and system performance issues, • Strong experience gathering business requirements and translating them into technical workflow solutions, • Experience documenting system configurations, integrations, and technical procedures, • Experience delivering reports based on business user requirements, • Strong verbal and written communication skills, • Well-organized and detail-oriented with the ability to manage complex assignments, • Ability to work effectively in a collaborative team environment, • Construction management domain knowledge (preferred), • Experience with other Construction Management software platforms (preferred) SCOPE OF SERVICES • Design, develop, test, and deploy applications using Kahua KBuilder to support construction project management processes, • Build and maintain approval workflows and document management solutions within the Kahua platform, • Design and implement automated approval and signature workflows leveraging Kahua Approvals, Kahua Signatures, and DocuSign, • Integrate Kahua APIs and external APIs to enable seamless data exchange with third-party systems, • Provide ongoing production support, troubleshooting issues related to workflows, document processing, and system integrations, • Support deployment and rollout activities, collaborating with business users to ensure successful adoption, • Translate construction management and approval process requirements into scalable technical solutions, • Document workflows, integrations, configurations, and troubleshooting procedures for long-term system stability, • Develop and deliver DevExpress-based reports to meet stakeholder reporting needs UNIVERSAL Technologies is an equal opportunity employer.

Job Description Currently we are looking for Fire Protection Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $25hr - $40/hr Based on Certification & Experience Fire Protection Inspector Role Overview The Fire Protection Inspector provides specialized inspection and verification services for fire and life-safety systems on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable NFPA standards, as required by each project. The Fire Protection Inspector is responsible for verifying that fire protection systems and fire-resistive construction are installed in strict conformance with approved design documents, shop drawings, specifications, code requirements, and manufacturer instructions. Systems may include, but are not limited to, sprinkler and standpipe systems, fire suppression piping, spray-applied fireproofing, firestopping, fire dampers, and related life-safety components. This role requires an active on-site presence during installation and testing activities, including witnessing required inspections, hydrostatic tests, acceptance testing, and special inspections. The inspector will coordinate closely with contractors, construction managers, testing laboratories, special inspection agencies, and client representatives to ensure all fire protection work meets regulatory and project-specific requirements. The Fire Protection Inspector plays a critical role in life-safety compliance, proactively identifying non-conforming conditions, documenting deficiencies, issuing Non-Conformance Reports (NCRs) where required, and verifying corrective actions and re-inspections. Clear documentation, timely communication, and strict adherence to code requirements are essential to the success of this role. • Work responsibilities may include but are not limited to the following:, • Inspection of fire suppression piping, hangers, seismic bracing, and supports, • Inspection of spray-applied fire-resistive materials (SFRM) and intumescent coatings, • Verification of firestopping systems and through-penetration fire assemblies, • Witnessing hydrostatic, flush, and acceptance tests for water-based systems, • Review of approved shop drawings, material submittals, and test reports, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • Bachelors Degree in Architecture (accredited institution or equivalent), • Bachelors Degree in Engineering (accredited institution or equivalent), • ICC Certification as a Spray Applied Fireproofing Special Inspector, • NICET Level II Certification in Fire Protection – Inspection and Testing of Water based Systems, • NYC Licensed Class A or Class B Master Fire Suppression Piping Contractor License In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description About the Company & Project Our client is a leading global Consultancy renowned for delivering high-profile, complex, iconic, large-scale capital projects. We are currently seeking a dedicated and accomplished Construction Reporting Analyst for the Hudson Tunnel Project (HTP). This is a once in a lifetime opportunity to contribute to this landmark project that is poised to deliver transformative impacts across economic, transportation, and environmental sustainability. The busiest rail connection between New York, New Jersey, and the Northeast Corridor, the Hudson Tunnel Project will improve capacity, reliability, and resiliency of commuter and intercity rail transit serving 800,000 daily passengers from Washington, D.C. to New York and New England. This is a milestone project that is slated to receive nearly $12 billion in federal funding, the largest investment in a mass transit project in modern history. In this role, you will play a pivotal role in the delivery of this significant project. This is a fantastic opportunity to be part of a mission that aligns with our clients purpose: to create responsible places that bring transformative impact to their people, communities, and societies. Responsibilities • Design, develop, and maintain business intelligence and analytics solutions using Microsoft Power BI, with a focus on performance and long-term supportability., • Collaborate with stakeholders to gather requirements, deliver insights, and ensure data integrity through analysis, master data management, and quality assurance., • Work closely with data architecture and IT service teams to align technology platforms, scope data model changes, and support seamless transitions into operations., • Maintain up-to-date knowledge of emerging technologies, driving innovation in reporting and digital solutions., • Proven experience designing, developing, and supporting BI solutions using Microsoft Power BI., • Strong analytical skills with a demonstrated ability to extract actionable insights from complex data sets., • Full project lifecycle experience within large-scale programs and cross-functional delivery teams committed to quality., • 5+ years of experience with strong Power BI, data structures and creating reports in Power BI, • Ability to work with all systems running, integration with tables, API's, data business and mining background. Very fluent in data management and report creation. Platinum Global Talent Solutions is committed to providing equal employment opportunities to all qualified individuals. We refer candidates based on their qualifications and experience, without consideration of race, color, religion, national origin, sex, age, disability, veteran status, or any other legally protected status. Why this is a Great Opportunity • Full-time position with competitive compensation, • Comprehensive benefits, including medical, dental, vision, and 401(k), • Opportunity to work in a client-facing role delivering significant and impactful capital projects., • Medical, Dental and Vision Insurance, • Life Insurance and Accidental Death and Dismemberment, • Disability Insurance, • 401(k) plan