Design & construction jobs in New York, New YorkCreate job alerts

Key Responsibilities: Climb towers (up to 500 ft or more) to install, inspect, and maintain wireless equipment. Install and secure antennas, coaxial cables, fiber lines, connectors, mounts, and grounding systems. Perform sweep and PIM testing (if trained) and basic troubleshooting of equipment. Assist with tower structural modifications, antenna alignment, and weatherproofing. Load/unload materials and rig equipment for tower lifts. Use hand tools, power tools, and test equipment safely and effectively. Follow detailed construction drawings, scopes of work, and RF design plans. Ensure all work is performed safely, with high quality and attention to detail. Maintain accurate daily field reports, timesheets, and photo documentation. Assist with on-the-ground civil or electrical tasks when not climbing. Participate in job site safety briefings and follow all OSHA and company safety standards. Requirements: Education & Experience: High school diploma or GED (required). 1 3 years of experience as a Tower Technician or equivalent climbing experience. Proven tower climbing experience (required). Experience with LTE, 5G, small cell, DAS, or microwave systems is a plus. Skills & Competencies: Ability to climb and work at heights for extended periods. Knowledge of tower rigging, safety procedures, and fall protection. Familiarity with installation and testing tools (Anritsu, Site Master, fiber testers, etc.). Strong teamwork, communication, and problem-solving skills. Ability to read and interpret construction documents and RF plans. Certifications (Required or Preferred): ComTrain or equivalent tower climbing certification (required). OSHA 10 or 30 Construction Certification. RF Awareness Certification. First Aid/CPR. Competent Rigger and Rescue Training (preferred). Valid driver's license with clean driving record (CDL is a plus). Working Conditions: Must be able to climb towers 100 500+ feet frequently. Outdoor work in all weather conditions. Extended travel and overnight stays often required. Must be able to lift 50 75 lbs, bend, reach, and work in physically demanding conditions. May require hearing protection.

Job Description MIH Systems Group is a growing company in the evolving field of building commissioning, and we strive to make buildings work better. Specializing in the optimization of complex building systems, our team's diversified skill set provides value to our clients from the design stages of new construction all the way through operating existing buildings. Our consulting group provides a full array of commissioning services for both new and existing buildings, and our technical services group provides start-up services on complex HVAC equipment from a wide range of manufacturers. The MIH team consists of experienced industry-leading professionals, focused on logistical, energy and cost-effective solutions to our clients. The HVAC Service Technician specializes in the start-up and service of equipment for a variety of applications of air-conditioning, heating, ventilation, humidity control and energy management. We are searching for both experienced and entry-level HVAC technicians to help support the growing service business. The candidate must be able to troubleshoot and repair HVAC systems, be dependable and have good customer service skills. This role would service our NYC Metro area. Requirements: * 5+ years of solo field experience with commercial heating and air conditioning. (Journeyman) * Must have knowledge of commercial air-conditioning, heating, water source heat pumps & rooftop packaged HVAC systems. * Advanced knowledge of refrigeration. * Controls background a plus. * Manufacturing representative a plus. * EPA certification * MUST have a clean driving record. Estimated Salary: $60/hr - $70/hr, with flexibility based on experience and skills. MIH Systems Group provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. You should be proficient in: • Refrigeration Systems, • HVAC Service & Installation

Job DescriptionBenefits: • Dental insurance, • Health insurance Qualifications • Bachelor's Degree plus 5 years of related experience, • Substation background and experience with GIS is a MUST, • Liaison between NYPA site/region staff, NYPA corporate staff (multiple departments), design consultant, and construction/implementation contractors., • General CM responsibilities like CM daily log, construction oversight etc., • Utilities Experience, • Excellent interpersonal skills, staff supervision, strong negotiation skills and conflict resolution abilities, • Provide oversight of the field construction inspectors during the project construction phase including; preparation of inspectors daily work schedules, ensuring site safety monitoring, technical oversight, quality of construction, and Client satisfaction, • Accountable for the planning, coordination and inspection and construction management activities and assignments of all direct reporting staff to ensure efficient utilization of staffing, • Balance work in the project office with the senior management team and also provide supervision of the field inspection teams working nights and weekends, • Interface with multiple contractors to ensure coordination of construction activities and acquisition of force account support staff with multiple transit and railroad agencies in a timely manner to meet aggressive project schedules

Summary If you are looking for a career with excellent earnings potential and sales opportunity - then look no further than Global Furniture Group, one of the largest manufacturers of workplace, education, healthcare + hospitality furniture in North America. Global Furniture Group has an immediate career opportunity for Territory Manager, A+D in theNew York City Area. This candidate will play a key role in influencing design specifications, driving demand generation, and representing the Global brand as a trusted resource to design professionals, project teams, and industry stakeholders across the assigned territory. Essential Duties and Responsibilities • Develop and sustain strong, loyal relationships with architects and, • Build and maintain strong relationships with key influencers, including architects, design firms, independent reps, dealers, and end users to increase sales efforts through specifications of our Global Office, Global Care, and Evolve systems product lines., • Develop and execute a strategic plan to increase Global's visibility, engagement, and product specification within the A+D community., • Actively promote Global's products, capabilities, and design solutions to architects, designers, and specifiers through presentations, Live demos, showroom tours, events, and project consultations., • Conduct ongoing product education, and training sessions for A+D professionals, ensuring understanding of Global's product offering, differentiators, and design resources., • Represent Global at industry trade shows, networking events, CEU presentations, and industry associations (e.g., IIDA, ASID, AIA, NEWH)., • Track project opportunities through CRM tools and work cross-functionally with sales and dealer teams to follow through on specifications., • Provide market feedback and competitive intelligence to product management and marketing teams., • Maintain an up-to-date knowledge of industry trends, emerging design needs, and evolving workplace strategies., • Collaborate with internal marketing and product development teams to support new product launches, campaigns, and initiatives within the territory., • Bachelor's degree in Business, Marketing, or a related field preferred. Equivalent combinations of education, experience, or military service will be considered., • Minimum of 3-5years of outside sales experience, preferably in dealer or distribution sales, furniture, building materials, or related industries., • Proven track record of meeting or exceeding sales targets., • Strong business acumen and ability to interpret and on business reporting., • Strong relationship-building, negotiation, and communication skills., • Ability to analyze territory potential, identify growth opportunities, and execute sales strategies., • Ability to sit and drive for extended periods., • Ability to walk and navigate customer sites, including offices, warehouses, rooftops, or construction areas as required., • Ability to stand for extended periods during meetings, presentations, and customer events., • Occasionally lift, carry, and transport product samples or marketing materials up to approximately 25 pounds., • Effective verbal communication, including presentations and negotiations., • Ability to plan daily activities, manage time independently, and prioritize tasks to achieve business objectives., • Self-motivated and able to work independently with minimal supervision., • Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook); CRM experience preferred. The role is a mix of office, remote, showroom, and client-facing settings. Frequent travel within the assigned territory is required, with exposure to varying customer environments such as offices, showrooms, event places as well as occasional outside weather conditions. While performing the duties of this job, team members are regularly required to frequently travel within the assigned territory - more than 50% of time spent in the field including driving to client meetings or events. This role may occasionally require lifting or transporting product samples or materials up to 50 lbs. (e.g., product samples, display materials). Must be able to sit, stand, and move throughout showrooms, client spaces and event locations. WHO WE ARE Global Furniture Group is a leading North American Manufacturer of furniture solutions. Global offers a broad range of furniture products designed for the workplace, education, healthcare + hospitality markets, delivering exceptional value and quality to its network of dealers, designers and customers. Operating for 50+ years and employing more than 4,000 people worldwide, Global has locations throughout Canada, the US, Mexico, China and the UK. COMPENSATION & BENEFITS Actual base pay offered will be based on multiple factors, including but not limited to job-related knowledge/skills, experience, geographical location, and internal equity. At Global, an individual may not be hired at the high end of the range for their role. Compensation decisions are dependent upon the facts and circumstances of each potion and candidate. (If a bonus or commissions see below for additional sentence). Global offers a comprehensive employee benefit program that enables our employees to stay healthy, feel secure and maintain a work/life balance. The following are benefits we offer employees (or may be eligible for): Paid Time Off | Holiday Pay | Medical/Prescription Insurance | Dental Insurance | Vision Insurance | Health Savings Accounts (HSA) | Company-Paid Life and AD+D Insurance | Company Sponsored Long-term Disability | Short-term Disability | Voluntary Life Insurance | Employee Assistance Program (EAP) | Critical Illness and Accidental Injury Insurance | FSA | 401(k) & Roth 401(k) BONUS/COMMISSIONS This position is also eligible for performance-based commissions based on sales volume in assigned region. WHERE WE ARE Global has distribution centers and showrooms located all across the USA + Canada. Global USA Showrooms: Atlanta | Boston | Chicago | Irvine | Miami| NYC | Philadelphia| Phoenix | Washington DC Global USA Showrooms + Distribution Centers: Atlanta | Baltimore |Chicago | Cincinnati | Dallas | Denver | Houston | Kansas City | Los Angeles | Miami | Philadelphia | Seattle | Tampa You can visit us at___. Work Authorization: Must be legally authorized to work in the U.S. on a full-time basis. Global does not sponsor work authorization or visas for this role. Global is a smoke-free, drug-free workplace and equal opportunity employer. Qualified applicants will receive consideration for this position without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability or protected veteran status. To request assistance in completing this application, please call 800.220.1900 and ask for Human Resources. Veterans encouraged to apply.

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. As a Distribution Engineer / Designer, you can expect to: • Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers, • Review work provided by Client and assess requirements of scopes., • Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker., • Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met., • Conduct root cause analysis of outages and mitigation using engineering principles and design, • Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications What Sets You Apart (Background Requirements): • 2+ years of prior relevant experience is required., • Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree, • Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation, • Experience with utility reliability projects, • Ability to demonstrate proficiency with the NESC, • Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates), • Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages, • Candidates should possess valid U.S. driver's license, as some local or regional travel is expected Nice to Haves: • Previous QAQC experience, • Experience providing estimated costs, development of a BOM, calculating the CIAC, • Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc, • Experience with the Work Management System CREWS, • Relevant management or leadership experience Professional Attributes that will help you succeed in this role: • Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy, • Collaborative and inclusive of individuals of diverse backgrounds and geographic locations, • Positive attitude, • Ability to work with limited supervision, • Professional dress and demeanor, • Attention to detail & Highly organized, • Excellent time management At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Description At Leidos, the opportunities are boundless. We challenge our staff with interesting assignments that provide them with an opportunity to thrive, professionally and personally. For us, helping you grow your career is good business. Leidos is seeking Distribution Engineers & Designers in New Jersey who are passionate about electric utility design engineering. We’re looking for someone who is dedicated to ensuring that every project, no matter how simple or complex, is of exceptional quality. You'll be working directly with clients to make sure that Leidos' reputation for high-quality work is always maintained. If you join us in this role, you'll gain expertise in a variety of areas, including NESC, Structural Pole Modeling, Electrical Power Calculations, GIS design training, Field Data Collection, and Client Design Standards. Your greatest work is ahead! Travel: This position has remote-working capabilities, but candidates must be located within a commutable distance of our New Jersey support areas in order to be considered, so we can provide support to our local utility customer as needed. The selected candidate(s) will be expected to be available for in-person meetings and assignments throughout the customer territory in New Jersey on an as-needed basis. As a Distribution Engineer / Designer, you can expect to: • Independently develop design and construction work packages for electrical overhead and underground distribution systems for Leidos electric utility customers, • Review work provided by Client and assess requirements of scopes., • Perform engineering calculations such as: structural analysis for wood pole loading, guying calculations, specifying conductor sags and tensions for recommended spans, and calculation of voltage drop and flicker., • Provide engineering support during construction, including post-construction reviews to ensure all applicable engineering and construction standards have been met., • Conduct root cause analysis of outages and mitigation using engineering principles and design, • Gain experience in coordinating conflicting utilities and other field engineering design requirements, assessing and developing large design packages for complex cable/conduit projects in dense urban environments, work permit development, easements, and ROW applications What Sets You Apart (Background Requirements): • 2+ years of prior relevant experience is required., • Bachelor's Degree (Electrical, Mechanical, Civil, or Industrial preferred); additional relevant experience/certifications may be considered in lieu of bachelor's degree, • Experience with the execution of distribution projects from kickoff through design approved, including Customer interaction and Process documentation, • Experience with utility reliability projects, • Ability to demonstrate proficiency with the NESC, • Ability to utilize a personal vehicle, as some customer-related travel could be anticipated (Job-related travel will be reimbursed at IRS-approved rates), • Willingness to perform both field and office work; Ability to work in outdoor environments on occasion; The role may require customer-site visits to collect field data that will assist in developing work packages, • Candidates should possess valid U.S. driver's license, as some local or regional travel is expected Nice to Haves: • Previous QAQC experience, • Experience providing estimated costs, development of a BOM, calculating the CIAC, • Experience with design tools such as Pole Foreman, O-Calc, Spida-Calc, • Experience with the Work Management System CREWS, • Relevant management or leadership experience Professional Attributes that will help you succeed in this role: • Strong communication skills, written and interpersonal communications skills and supporting of customer advocacy, • Collaborative and inclusive of individuals of diverse backgrounds and geographic locations, • Positive attitude, • Ability to work with limited supervision, • Professional dress and demeanor, • Attention to detail & Highly organized, • Excellent time management At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. As a valued team member, you can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements, as well as managers who will encourage career development and growth opportunities, including Professional Engineer License (PE), Project Management Professional (PMP), Leadership training, Formal Mentorship Programs, Management opportunities. PDSDLINE PowerDelivery If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 27, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $59,150.00 - $106,925.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid driver’s license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect

Job Description Job Title: Traffic Operator- Over Nights Salary: $30/hr-$35/hrLocation: Northern New Jersey / New York City Company Overview:Drive Integration, LLC (DI) is a certified Disadvantaged Business Enterprise (DBE) and Women-Owned Small Business (WOSB) specializing in infrastructure design, network engineering, hardware/software integration, installation, and equipment vending services. We support agencies and businesses with innovative technology solutions and are proud to serve major clients including NJDOT, SEPTA, PennDOT, and others across the Mid-Atlantic region. Position Description:The technician will play a key role in monitoring closed-circuit TVs, radio communications, police and fire scanners, incident detector devices, and assess roadway conditions for traffic, weather, and overall operations. Provides traveler information in the event of an accident by activation of highway advisory radio devices and dynamic/variable message boards. Reports and notifies maintenance personnel of highway incidents or weather conditions. Notifies State Police of vehicles that must be removed that may pose a safety hazard. Performs other related duties as assigned. Responsibilities include: • Maintaining and troubleshooting network devices, camera systems, access control, and vehicle tag readers., • Performing firmware and configuration updates on network systems., • Incident coordination in ITSM tool, • Collaborating with support teams to ensure systems are fully functional and aligned with customer needs., • Remote technical support for systems users, • Explaining issues and solutions clearly to clients., • Building and maintaining customer relationships., • Performing additional duties as assigned.Requirements:, • Valid driver’s license and clean driving record., • Relevant experience in traffic or road construction, or similar fields., • Availability for flexible shifts, including weekends and on-call rotation., • Physical capability to perform tasks that include bending, lifting up to 50 lbs., and working in confined spaces., • Proficiency in MS Word, Outlook, Excel, and Teams., • Knowledge of LAN/WAN fundamentals and troubleshooting experience with Windows and MS Office., • Strong English communication skills, with additional languages (Spanish, French, or German) as a plus. Drive Integration, LLC is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Job Title: Roadway Worker In Charge (RWIC) Location: New York, NY Job Type: Full-Time FLSA Status: Hourly; Non-Exempt Reports To: District Manager Travel: Yes, travel is expected for this position (50% - 85% on average). Supervisory Responsibility: No Compensation: Negotiable, based on skills and experience. Company Profile: National Railroad Safety Services, Inc. (NRSS) is a certified DBE/WBE firm primarily focused on providing safety services to the railroad industry. NRSS is the most trusted name in the railroad industry for providing qualified field safety staff and safety training. To best serve the railroad industry, NRSS provides all of these services in the continental United States, Canada, and Mexico. NRSS has the proven ability and the proven safety record to handle any project. Find the safety you have been missing today! Job Description: National Railroad Safety Services, Inc. (NRSS) is seeking a Roadway Worker In Charge (RWIC) to support railroad flagging services for Class 1 Railroads, Regional Short Lines, Transit Systems, State DOT's, as well as Railroad Suppliers, Contractors, and Consultants alike. Required Education: High School Diploma or Equivalent. Required Experience: Minimum 2 years of experience with a Class 1 Railroad, Regional Short Line, Transit System, State DOT Rail Division, Railroad Supplier, Railroad Contractor, and/or Railroad Consultant; preferably within the Maintenance Of Way (MOW) Department. Key Success Factors: • Accountability: Accept full responsibility for self and contribution as a team member., • Adaptability & Flexibility: Ability to consider a variety of issues that exist in the work place and change from one task to another as necessary., • Attention to Detail: Ability to work in a conscientious, consistent, thorough manner, and attend to details while pursuing quality when accomplishing tasks., • Analytical Thinking: Ability to analyze and synthesize information to understand issues, identify options, and support sound decision making., • Communication: Ability to clearly convey information and ideas through a variety of media to employees/clients in a clear and succinct manner., • Customer Service Focus: Ability to provide service excellence to internal and/or external clients., • Decision Making: Ability to identify/understand issues, problems, opportunities and take appropriate action based on available facts, constraints, and probable consequences., • Initiative: Ability to identify what needs to be done and take action before being asked., • Innovativeness: Ability to devise new plans for quality excellence., • Knowledge: Ability to navigate various rulebooks and/or regulations and demonstrate mastery., • Organization: Ability to maintain materials and/or records in a clean and ordered manner., • Planning: Ability to plan and prioritize work load to manage time effectively and accomplish assigned tasks., • Stress Tolerance: Ability to maintain stable performance under pressure or opposition (such as time pressure or job ambiguity)., • Teamwork: Promote cooperation and commitment within a team environment to achieve goals and deliverables., • Proficient computer skills in basic email, phone, and text message applications., • Proficient computer skills in Android OS; on tablet & smart phone., • Proficient computer skills in Citrix Applications., • Strong oral and written communication skills., • High level of accuracy and attention to detail; well organized., • Strong technical knowledge in Railroad Engineering, Railroad Design, Railroad Construction, and Safety., • Demonstrated ability to develop and maintain strong client relationships., • Ability to travel for extended periods of time; sometimes month(s) at a time., • Provide jobsite coordination., • Provide clear and concise communication with Dispatchers, Train Crews, other Railroad Personnel, and/or Contractor personnel., • Provide clear, concise, and thorough job briefings with all personnel on each job site., • Enforce Contractor training requirements., • Enforce all Railroad, State, and Federal Policies., • Submit daily field reports detailing Contractor and/or Railroad activities., • Identify rule violations and resolve in accordance with Railroad, State, and Federal Policies. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Must be able to hear, speak, read, and write clearly in English., • Must be able to drive long distances and/or travel by other modes as necessary., • Must be able to stand for long periods of time and/or walk on level/uneven ground., • Must be able to see up close, distances, colors and have use of peripheral vision and depth perception., • Must be able to tolerate extreme heat/cold temperatures., • Must be able to tolerate dusty/noisy conditions., • Medical, Dental, Vision, Life Insurance, • Short Term, Long Term Disability Insurance, • Paid Vacation and Holidays Safety Commitment: All employees of all levels are to remain committed to safety at all times while employed at National Railroad Safety Services, Inc. (NRSS). As such, no job is so important and no service is so urgent that we may not take time to perform all work safely. Simply put, safety is our way of life. By placing safety first, we not only ensure the wellbeing of our employees, customers, and communities, but we hold true our commitment to being the leader in safety throughout the Railroad Industry. Closing Statement: National Railroad Safety Services, Inc. (NRSS) is an Equal Opportunity/Affirmative Action Employer. Any candidate selected for this position must be able to successfully pass pre-employment/recurrent background checks, drug/alcohol testing, and classroom training. Job Posted by ApplicantPro

Job Description Interested in the opportunity for a great career as a utility locator. Join T2 Utility Engineers (T2ue) in Oceanside, NY as part of our Subsurface Utility Engineering (SUE) field tech team. Our SUE field techs gain on-the-job training in utility locating and utility designating, along with knowledge and experience in Subsurface Utility Engineering and surveying methods and technology. When you join our field tech team, you’re not confined to an office. T2ue provides you with outstanding benefits and an opportunity for a great career with room for advancement. Are you self-motivated and interested in learning? We’re looking for people interested in advancing and building a career with the leader in the utility locating industry. You don’t need experience in our industry to join our team. We’ll provide training, you provide the initiative to build a career with us. Since 1993, T2 Utility Engineers has provided professional Subsurface Utility Engineering and surveying services in support of infrastructure projects of all sizes and types. Using advanced technologies, our team of field technicians, engineers, and surveyors, provide quality data and professional insight to help our clients visualize, plan, and design their projects. Our mission is to provide project stakeholders with quality information, professional insight and deliverables that streamline construction, improve project safety and set the standard for the engineering industry. SUE Technician II responsibilities include, but are not limited to: • Be skilled in the operation of SUE utility locating and designating equipment, including pipe and cable locators, Ground Penetrating Radar (GPR), and non-destructive vacuum excavation, • Complete detailed accurate daily reports, forms and field sketches, both electronically as well as draft by hand, • Use of tools and equipment to conduct utility investigations, including jackhammer, pogo-tamper, concrete saw, compressor blower, vacuum hose, air lance, and hand tools, • Drive commercial motor vehicles, however a CDL license is not required, • Perform safety set-up and maintenance of traffic operations under direct supervision of senior field staff, • Assist with survey and data collection tasks, supporting overall crew activities, • Perform daily routine maintenance of equipment, • Perform daily basic vehicle maintenance Tech II Qualifications: • High School Diploma/GED, • 4+ years of experience in the utility locating industry or as a SUE Field Tech, • Ability to read and interpret utility company prints and design plans, • Valid driver's license with good driving record, • Ability to pass a pre-employment physical (U.S. only), • Ability to obtain a DOT medical card for CMV operation (U.S. only), • Ability to lift 50 lbs. and perform physical movements necessary to operate heavy tools and equipment, • Ability to work outdoors in all climates, • Willingness to travel up to 50% of the time, by company vehicle or commercial airline, up to 2 week continuous stay., • Work nights and weekends when required to do so, • Must have a good oral and written communication skills and attention to detail, • OSHA Safety certifications are a plus We Offer a Complete Benefits Package! In addition to the opportunity to grow and advance, we offer competitive salaries, paid training, and comprehensive benefits with options to meet your needs, including; • Paid time off, • Paid overtime, • Paid holidays, • Company provided cell phone or cell phone allowance, • Boot and clothing allowance, • Generous daily food and incidentals allowance when overnight travel is required, • Medical and prescription drug coverage – multiple plan options, • Flexible Spending (FSA), Dependent Care (DCA), or Health Savings (HSA) accounts, • Dental, • Vision, • Wellness and Employee Assistance Programs, • Parental, Family and Medical leave, • 401-K retirement plan w/company match, • Life insurance, • Short / long term disability, • Tuition reimbursement, • Spot and annual bonus incentives, • Employee discounts and perks, • Please Note that selected candidates will be required to pass a drug, background, and reference screening. T2 Utility Engineers is an equal opportunity employer. We are committed to an inclusive, equitable and accessible workplace. Qualified applicants will receive consideration for employment without regard to race, color, citizenship, creed, sex, sexual orientation, gender identity, gender expression, age, marital status, family status or disability. If you require an accommodation at any time during the recruitment or application process, please contact Human Resources. T2 Utility Engineers does not accept unsolicited resumes from any 3rd party agencies. No fee will be paid to 3rd parties who submit unsolicited resumes to any T2 Utility Engineers employee. Resumes from approved vendors must be specifically requested by T2 Utility Engineers and approved by the T2 Utility Engineers Talent Acquisition Team.

Job Description Our Vision: To make New York City the global model for inclusive innovation and economic growth, fueled by the City's diverse people and businesses. Our Mission: Creating a vibrant, inclusive, and globally competitive economy for all New Yorkers. Position Overview: The Lead Mechanic within Public Markets will provide field knowledge, maintenance oversight, handyman capabilities, pest control management, cleaning supplies orders and inventories and sub cellars management for Public Markets. This person will work directly with contracted maintenance staff, field employees, portfolio management, design and construction teams, and will report to the VP, Public Markets Operations. This role will assist within the three directly managed public markets and additional sites as needed. It will also require flexibility on the workings days and hours, including nights and weekends. Essential Duties and Responsibilities: • Supervision contracted vendors: Assist in management of on-site contracted janitorial and security workers, as well as contractors performing repair work within the properties. Assist in supervising maintenance and security staff (contractors). Help oversee pest control work and contribute with strategies to help keep markets free of pest., • Supervise and Monitor: Supervise and manage mechanics, and general field staff and crews. Supervise the cleaning of entrance and interior doors daily, as well as storage, hallways, lobbies, lounges, corridors, stairways, restrooms and replenish bathroom supplies are done to standards. Ensure the janitorial staff utilize appropriate cleaning supplies, materials, liquids and other agents as appropriate. Paint or clean floors and walls as needed. Clean urinals, toilets, sinks, mirrors, walls, etc. Ensure janitorial job performance is up to expected standards., • Supervise Rubbish collection: Supervise the trash collection process. Transport trash and waste to disposal areas if needed., • Supervise Special Cleanings: Clean, prime and paint building interior/exterior walls or coordinate with designated vendors as needed to keep the building façade free of graffiti. Supervise all deep cleanings for market and outside windows to make sure they are done as stipulated in the vendor's contract., • Cleaning Supplies Inventory and Ordering: Ensure all markets have the necessary cleaning supplies and keep track of their usage and inventory. Building systems are operable, reliable, and safe for use. Responsible for arranging ongoing maintenance and repairs and coordinating with contractors, and mechanics to perform maintenance and repairs of building systems as required., • Emergency Response: Respond to emergencies as required. Must be available and responsive 24/7 and able to help provide solutions during the decision-making process as issues arise. Supervise the removal of ice and snow as required, which may require 24 hours per day/7days-a-week response., • Site Inspections: Conduct weekly site inspections and report findings. Supervise the cleaning and regular checking of all lighting fixtures and replace light bulbs as needed., • Supervise Special Market Set Ups: Clean, prime and set up markets with field staff for special events and programming., • Safety Data Sheet Management: Maintain and coordinate the SDS for maintenance & tenants annually at each market., • High School Diploma or equivalent, • 4+ years of related experience in maintenance and upkeep of commercial and/or residential properties, • Demonstrated communication skills, • Ability to work independently, • Proficient in MS Office and Outlook, • Familiarity with using a two-way radio and iPhone., • Knowledge of cleaning machines and tools, including use of maintenance and minor repairs, • Knowledge of chemicals found in cleaning products, danger signs and disposal methods, • Ability to push or carry objects, • Ability to work in a team environment and to work on individual projects with minimal oversight, • Valid driver's license, • Familiarity with typical building systems, • Familiarity with building and fire code codes/regulations, • Familiarity with typical refrigeration systems, • Familiarity with snow removal procedures and plans, • 24 hour on-call response NYCEDC is committed to offering competitive benefits to support employee health, happiness, and work-life balance. We offer comprehensive benefits and unique perks to ensure NYCEDC employees flourish in their professional and personal lives: • Generous employer subsidized health insurance, • Medical, dental, and pharmacy plans, • Vision and hearing benefits, • Flexible spending accounts for healthcare and dependent care, • Short term and long-term disability coverage, • 100% employer covered life insurance and supplemental life insurance coverage, • Up to 25 vacation days, • Floating Holidays and Summer Fridays, • Parental leave - up to 20 paid weeks, • Retirement savings programs, • Company-paid 401(a) defined contribution plan, • 457(b) tax-advantaged retirement savings plan, • Tuition Reimbursement program, • Continuing education and professional development, • Public Service Loan Forgiveness (PSLF) eligible employer, • College savings plan, • Backup childcare, • Gym membership discounts, • A Calm.com membership for mindfulness and mental health support The New York City Economic Development Corporation is an Equal Opportunity Employer. Our Diversity, Equity, and Social Responsibility Mission is to create a People First strategy by attracting, retaining, and engaging a diverse and talented workforce. Like the city of New York, NYCEDC knows our strength comes from each of our connected parts, making the fabric of our organization better and stronger because of our unique employees' talents. For more information, visit our website at edc.nyc.

Job DescriptionDescription: For more than 75 years, Heatherwood has been committed to building upscale residential rental communities, commercial properties, and luxury urban spaces. Our commitment to quality construction, striking design, and exemplary service makes us one of the most highly regarded leaders in the industry. We offer a competitive benefits package including health, dental, and vision insurance, 401(k), and paid PTO. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Regional Coordinator for Heatherwood, you will play a vital role in supporting both our maintenance operations and lease-up activities (if applicable) across multiple residential communities. You will help ensure ongoing performance of new and existing properties by coordinating vendors, maintenance teams, leasing staff, and residents to deliver exceptional service and operational excellence. Requirements: Your Responsibilities: Scheduling & Project Coordination • Schedule make-ready, inspection, assessment, move-out, and unit-turn appointments (painting, cleaning, and repairs)., • Coordinate between Maintenance Managers, Vendors, Construction, Leasing, and Residents to ensure timely project completion., • Schedule elevator usage for move-ins, move-outs, and vendor work if needed., • Send E-blasts and notifications for maintenance updates, project work, and resident communications., • Create and manage purchase orders for supplies and services, ensuring accuracy and proper documentation., • Verify budgets, GL coding, and capital expenditure allocations., • Track open purchase orders and reconcile discrepancies with Accounting., • Maintain and update all contract trackers, oversee renewals, and coordinate modifications with Legal., • Prepare and submit permit applications; monitor expirations, renewals, and required inspections., • Ensure all vendors maintain current insurance, certifications, and compliance documents., • Coordinate inspections with vendors and city agencies (Cooling Towers, Rigs, Department of Labor)., • Oversee rig and window work, including technician training and certification tracking., • Serve as a professional, friendly point of contact for residents during the pre-move-in and move-in process., • Coordinate move-ins and move-outs to ensure a smooth, timely, and positive resident experience., • Address resident inquiries and route maintenance or policy questions appropriately., • Support resident satisfaction and retention initiatives., • Set up new vendors and manage insurance packets and renewals., • Maintain spreadsheets and data for vendor pricing, compliance, and project tracking., • Support cross-department collaboration and assist Maintenance Managers with departmental initiatives. What You Bring to Heatherwood: • 2–5 years of experience in property management, maintenance coordination, or leasing administration., • Prior lease-up or multifamily operations experience strongly preferred., • Excellent verbal and written communication skills., • Strong organizational, scheduling, and multitasking abilities., • Problem-solving and process improvement skills., • Proficiency in Microsoft Office 365, SharePoint, Windows 10, and Excel (advanced reporting)., • Experience with Yardi and Suite Spot software preferred., • Familiarity with Fair Housing laws and NYC/NYS regulatory requirements (permits, inspections, insurance)., • Ongoing training and development opportunities to support career growth within Heatherwood., • Exposure to multiple facets of property operations, vendor management, and resident services., • Continued education on Fair Housing laws, building codes, and regulatory compliance., • Collaboration with experienced industry professionals and leadership teams., • Participation in Heatherwood’s strong safety and compliance culture through regular team training sessions.

Job Description OVERVIEW: Marc Jacobs International, driven by the visionary leadership of Marc Jacobs, is seeking a proactive and detail-oriented Retail Repair & Maintenance Coordinator based in our New York City (SoHo) headquarters. This role is responsible for ensuring all locations remain fully functional, safe, and customer-ready, with a strong focus on coordinating repairs and maintenance. The position also supports new store openings, store closures, alarm systems, and business licensing compliance. RESPONSIBILITIES: Retail Repair & Maintenance Focus • Serve as the primary contact for all store repair and maintenance requests, • Prioritize urgent issues that impact store operations, safety, or customer experience, • Dispatch vendors and ensure timely, high-quality completion of work, • Track and follow up on all work orders to minimize downtime, • Conduct routine store inspections and proactively identify maintenance needs, • Implement and manage preventive maintenance programs, • Ensure all stores meet brand standards and operational readiness, • Coordinate and manage repairs for: • Plumbing and restrooms, • HVAC systems, • Store fixtures, shelving, and displays, • Doors, locks, and flooring, • Coordinate maintenance and facility readiness for new store openings, • Work with construction, operations, and vendors to ensure all systems (lighting, HVAC, fixtures, alarms), • Schedule and oversee final repairs, punch-list completion, and store setup support, • Support store closures, including:, • Coordinating fixture removal and repairs, • Ensuring utilities are properly shut down, • Managing vendor access and timelines, • Preparing locations for handover or lease requirements Vendor & Cost Management • Source and manage third-party contractors and service providers, • Review estimates, negotiate pricing, and control maintenance costs, • Build relationships with vendors to ensure fast and reliable service, • Track expenses and support maintenance budgeting Alarm & Security Systems • Coordinate installation, maintenance, and repair of store alarm systems, • Partner with alarm vendors to troubleshoot issues and ensure system functionality, • Respond to alarm-related incidents to maintain store security, • Maintain alarm permits and documentation Business Licensing & Compliance • Track, renew, and maintain all required business licenses and permits, • Ensure compliance with local, state, and regulatory requirements, • Coordinate inspections and maintain accurate licensing records Admin • Manage access to systems and tools for retail employees as part of onboarding / offboarding process, • Approve retail supply orders and budgets (including office supplies, branded packaging, etc.), • Maintain retail DTC calendar, store contact information, and distros, • Assist with compiling, validating, and analyzing data collection results, • Review, code, and approve invoices in accounting payment platform QUALIFICATIONS: • Strong understanding of retail store systems and maintenance needs, • 2+ years of experience in retail maintenance, facilities coordination, or multi-site operations, • Strong problem-solving abilities in a fast-paced environment, • Experience with maintenance/work order systems preferred SALARY & BENEFITS/WHAT WE OFFER: The compensation for this position ranges from $33.50 - $35.00 hourly. The rate of pay offered will be dependent upon candidate’s relevant skills and experience. In addition, we offer our employees a comprehensive benefits package including paid holidays, vacation time, sick and personal time, medical, dental and vision insurance, and 401k matching. We also offer discounts on travel, entertainment, and more through our partnership with PerkSpot. MJ employees also receive discounts on MJ products throughout the year, as well as access to discounts on other LVMH brands. ABOUT MARC JACOBS For nearly 40 years, Marc Jacobs has been a driving force in fashion with his philosophy: pioneering designs, an irreverent spirit, the everyday and the extraordinary. Today, the brand continues to make its Marc as rebellious, unpredictable, and original. Our work is founded on our core brand pillars: unexpected, utilitarian, urban, unisex, and unique. NYC in design and spirit, our teams thrive off relentless authenticity, an openness to standing out, and inclusivity for all. EEO STATEMENT Marc Jacobs International was founded on Marc’s vision of celebrating uniqueness and being Perfect as You Are. We are committed to building an equitable and inclusive culture that values diversity of thought, background, and experience – all essential to our spirit of innovation and creativity. In line with this commitment, we believe that the best candidate may be one who comes from a less traditional background or may meet the qualifications in different ways. We encourage you to apply even if you don’t meet all of the listed qualifications. Marc Jacobs International is committed to providing equal employment opportunities to all employees and applicants for employment regardless of race, color, sex, sexual orientation, gender identity or expression, age, veteran status, national origin, religion, disability, or any other characteristic protected by federal, state or local law. Powered by JazzHR 1YrLvXFHt1

Job Description Position Summary The Building Maintenance Technician is a role that is tasked with supporting our Retail, Warehouse, Caves & Commissary teams with all property engineering and maintenance requests. This role will be a hands-on team member who maintains property appearance, equipment, HVAC, plumbing, refrigeration, and electrical systems that lead to a better customer experience. This includes physical plant and fixtures to provide maximum profitability and operational efficiency. He/She/They perform diverse, hands-on tasks including minor plumbing, electrical repairs, HVAC maintenance, painting, and carpentry. This role conducts preventative maintenance, responds to repair requests, manages outside vendors when needed, and manages tools to keep buildings running smoothly. He/She/They are responsible for maintaining basic systems operation, facility cleanliness, and completing repairs to other building components that influence customer service. Who You Are • Operations Focused: You always look for ways to control expenses while getting the work done. You have the know-how to get things done efficiently and effectively., • Hospitality Driven: Driven by a desire to create a space where customers want to return, you focus on how NYC customer-facing operations can create a warm and inviting environment that leads to crafting a remarkable experience., • Problem Solver: You’re not afraid to dive right in and attack a problem head-on. You use creative thinking to design strategies and are always prepared with potential solutions., • Timely: You are always timely and well-prepared in your actions and responses. You know what it takes to get the job done and always deliver and communicate results or decisions in an effective way., • Agile and action-oriented: You thrive on detail and are keen to notice changes in facilities operations; what works/what doesn’t. You are open to new ideas that drive you to perform at their best. What You Do • General & Preventative Maintenance:, • Inspecting and servicing machinery, HVAC systems, plumbing, and electrical systems to prevent failures., • Fixing broken items, such as repairing drywall, replacing light fixtures, repairing leaks, and fixing doors/locks., • Painting, cleaning, and repairing walls, floors, and surfaces., • Ensuring fire alarms, smoke detectors, and carbon monoxide detectors are operational, and maintaining compliance with safety regulations., • Responding with urgency to repair requests from location managers or their team members., • Maintains and cleans building equipment, including HVAC systems, plumbing fixtures, and electrical outlets., • Facility Upkeep:, • Keeps common areas, restrooms, and other public spaces clean and tidy., • Ensures cardboard and other rubbish is removed from warehouse floor., • Performs routine cleaning tasks, such as dusting, sweeping, mopping, and vacuuming., • Ensures that building systems are operating efficiently and safely., • Responsible for basic snow and ice removal during winter months., • Inventory and Supplies:, • Manages and maintains inventory of cleaning supplies, tools, and equipment., • Orders and restocks supplies as needed., • Keeps work areas organized and clean., • Other Duties:, • Required to work on-call or during off-hours for emergency maintenance requests, • Responsible for maintaining records of maintenance activities and repairs, • Must be able to operate and maintain a variety of hand and power tools, • Required to wear appropriate safety gear and follow safety procedures, • Other duties as assigned What We Need From You • 2+years in a mix of retail and hospitality management with an emphasis on commercial space maintenance, • Effective communication (listening, verbal, and written) skills and ability to work well with all levels of management, team members & external contractors/partners, • Basic construction skills such as carpentry, painting, masonry, & plumbing, • Skilled in using hand and power tools (e.g., drills, saws, wrenches), • Ability to diagnose & fix basic mechanical or electrical issues. Knows when to call external vendor for assistance/resolution, • Administrative skills for ordering supplies, handling records and scheduling maintenance, • Physical strength and dexterity to lift, move and handle equipment, • Stamina to deal with long hours standing or walking, • Ability to work in extreme hot or cold conditions, • Ability to multi-task in a fast-paced environment, paying close attention to detail & accuracy, • Flexible schedule with the ability to work nights, weekends, and holidays, • Extensive knowledge and experience with food safety compliance including NYS Department of Agriculture regulations, • College degree or equivalent education or training Work Perks: • Weekly pay, • 2 weeks’ vacation and sick time, • Comprehensive medical, dental, and vision benefits, • 401k with Company Match, • Life Insurance and LTD options, • Paid parental leave, • Annual bonus and referral program, • Pre-tax commuter benefits, • Discounts on our products, classes, and restaurant, • And more! About Us: Murray's Cheese was born in Greenwich Village in 1962, and the heart of our business still resides in New York City with many ways to experience Murray’s locally. At the counter, our cheese experts and mongers serve thousands of neighborhood regulars, commuters, and tourists every year at our two locations—the Bleecker Street flagship retail experience, which also includes our mac & cheese counter, and our shop in Grand Central Market. For those eager to learn more, we offer robust education and events programming and, for those looking to serve more, we provide catering of expertly crafted cheese boards and freshly made dishes. Oh, did we mention we also age our own cheese? Yeah, we do that too. We have state-of-the-art cheese caves in Long Island City. Because we like to share, we wanted to bring our exceptional cheese to people outside of New York too. So, we made Murray’s products available online at murrayscheese.com and in-store with a curated selection of specialty cheese in more than a thousand Kroger and Kroger-owned stores nationwide (and, growing every day!). And, through our wholesale business, you might enjoy Murray’s cheese at more than 600 restaurants across the country. Murray’s Cheese provides equal employment opportunities to all employees/applicants and prohibits discrimination and harassment of any type on the basis of race, gender, gender-identity/expression and transgender status, color, national origin, ethnicity, religion, creed, age, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), sexual orientation, marital, partnership, parental or familial status, citizenship status, pregnancy, childbirth, lactation or related medical conditions, military/veteran status, genetic information or testing (including predisposing genetic characteristics), domestic violence victim status, sexual abuse victim status, stalking victim status, caregiver status, unemployment status, consumer credit history, arrest or conviction record, or the perception that an employee has one of the above characteristics or any other consideration protected by federal, state or local laws. If contacted for an employment opportunity, please notify our HR team if you need accommodation. E-Verify Notice: • This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Please see the attached notice for more information., • Este empleador participa en E-Verify y proporcionará al gobierno federal la información de su Formulario I-9 para confirmar que usted está autorizado para trabajar en los EE.UU.. Por favor, consulte el aviso adjunto para obtener más información., • Attachment: E-Verify_Participation_Poster_Eng_Es.pdf

Job Description • Certification & Licensing, • Must hold a valid NYC Asbestos Investigator Certificate issued by the NYC Department of Environmental Protection (DEP)., • Must hold a valid New York State Asbestos Inspector Certificate issued by the NYS Department of Labor (DOL)., • Education & Experience, • High school diploma or equivalent (required); associate or bachelor’s degree in environmental science, or related field preferred., • Prior asbestos inspection or environmental health & safety (EHS) experience strongly preferred., • Knowledge & Skills, • Knowledge of federal, state, and local asbestos regulations (EPA, OSHA, NYS DOL, NYC DEP)., • Ability to conduct building inspections, collect bulk samples, and complete ACP-5 forms., • Strong documentation and report-writing skills; must be able to maintain accurate inspection records., • Familiarity with building materials, construction methods, and asbestos-containing material identification., • Strong attention to detail and ability to work independently in the field., • Physical Requirements, • Ability to climb ladders, access tight spaces, and carry inspection equipment., • Ability to wear personal protective equipment (PPE), including respirators, as required., • Other Requirements, • Willingness to work flexible hours, including evenings or weekends, depending on project needs., • Professional communication skills for interaction with clients, contractors, and regulatory agencies., • Basic computer proficiency, including email, document management, and standard office software. Job Description Our established (35+ years in business) North Jersey/New York environmental consulting firm has an opening for an Asbestos Investigator / Inspector. This position works under the supervision of a Senior Project Manager and involves working in a team environment with Project Design, Scheduling, Accounting, Sales, and other company groups. While the primary focus of this position is expected to be NYC Asbestos projects, there is also the opportunity to expand into other geographic areas such as NJ and Westchester/Rockland/LI. This diversity provides multiple opportunities for our staff to expand their environmental careers and obtain additional licenses/certifications. Benefits ❖ Medical/dental/vision insurance ❖ Disability insurance (long term) ❖ Paid holidays ❖ 401K matching retirement account and profit sharing plans ❖ Travel expense re-imbursement and/or car allowance Company DescriptionAbout us Omega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work. This policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections. At Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria. Since opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.About us\r\n\r\nOmega Environmental Services, Inc. was founded in 1989 when the key personnel of a “Fortune-500′′ company’s environmental engineering division founded their own company. The culture of the new organization is based on providing superior customer service, rapid response, and “turn-key” environmental health & safety services. Our company policy is to earn our client’s trust and respect by providing exceptional client service and consistently high-quality work.\r\n\r\nThis policy has enabled Omega to work with “Fortune-500′′ companies, health care institutions, and insurance companies on their environmental health & safety projects. In addition to asbestos and lead programs, Omega specializes in OSHA compliance programs, health and safety programs, indoor air quality assessments, and Phase I and II environmental site assessments. We have also been leaders in the industry in microbial consulting, remediation design & oversight. Working with healthcare institutions and hospitals, infection control departments often call us to perform outside quality control or assist in preparation for Joint Commission on Accreditation of Healthcare Organizations (JC) inspections.\r\n\r\nAt Omega, we are sensitive that our client’s financial resources available to address environmental and health, and safety issues may be limited. Yet the reduction of environmental liability is also critical. At Omega, both cost minimization and limiting environmental exposure are incorporated into our project design criteria.\r\n\r\nSince opening, Omega has experienced a health & controlled growth rate of nearly 20% per year, and our professional staff members have diverse backgrounds covering the following disciplines: Environmental Engineering, Industrial Hygiene, Ventilation, Toxicology, Risk Assessment, Air Pollution, Safety, and Environmental Law. Our field staff consists of professionals with undergraduate and advanced degrees and years of experience working with the public and private sectors on environmental projects. Over 80% of our work comes from referrals and repeat business. We have found success by focusing on the needs of our customers without compromising quality or liability-related issues.

Job DescriptionDescription: Overview For over 75 years, Heatherwood has been dedicated to developing upscale residential rental communities, commercial properties, and luxury urban spaces. Our reputation for quality construction, innovative design, and exceptional service has made us a recognized leader in the industry. At Heatherwood, we believe our employees are our greatest asset, which is why we prioritize professional development and promote from within. Heatherwood is on a mission to create high-quality places that inspire a genuine sense of community. As a Maintenance Technician II, you are the driving force in providing great service to our residents in a fast-paced, challenging, and rewarding environment. What You Bring to Heatherwood • A positive attitude, • Safety-first mindset and adherence to all safety policies, • A customer-first approach to service, • Team-oriented approach and strong work ethic, • High attention to detail and accountability for quality and timeliness of work, • Reliability, dependability, and initiative to solve problems independently. Ability to work independently through task completion, • Commitment to completing time-sensitive tasks and communicating timelines., • Effective written and verbal communication skills, • Knowledge of and compliance with company standards, policies, and procedures, • Maintain compliance with all Fair Housing standards in all resident interactions, • Maintain property standards for cleanliness, appearance, safety, and functionality, • Maintains a professional appearance at all times by practicing good personal hygiene and wearing a clean, presentable uniform., • Respond to service requests in a timely, professional, and customer-focused manner, • Flexibility to work overtime, on weekends, and participate in the emergency on-call rotation as dictated by business needs., • Assist with preventative maintenance programs and scheduled inspections, • Conduct property walks and equipment audits; identify and address maintenance issues, • Safely operate hand and power tools, • Perform apartment turnover activities, including cleaning, painting, and repairs, • Maintain consistent communication with the management team regarding timelines, priorities, and progress, • Perform physical tasks including lifting up to 50 pounds, climbing, bending, kneeling, and standing for extended periods, • Participate in snow removal activities as directed by the management team o Plumbing (water heaters, drain clearing, fixture repair and replacement) o Minor electrical repairs o Appliance repair o Drywall preparation and repair, painting, and basic carpentry • General understanding of building systems, including fire sprinkler, fire alarm, and central mechanical/HVAC systems (as applicable), • Understanding of and ability to assist with work order management and apartment make-ready processes, • Monthly safety training as part of Heatherwood’s Safety Culture, • Ongoing technical training, • Providing resources and support to help you successfully complete and maintain all necessary credentials, such as EPA type I, II & Universal, CPR, CPO, and standpipe certifications (NYC)., • Online training coursework to support ongoing development, • Internal growth opportunitiesRequirements:

New York City, NY – MEP Project Manager Salary: $120,000 - $165,000 We are partnering with a leading construction consultancy to appoint an experienced MEP Project Manager in New York City. This role will focus on the delivery of complex building systems across a diverse portfolio of commercial, mixed-use, and institutional projects. This is an excellent opportunity for a technically strong professional to take ownership of mechanical, electrical, and plumbing systems from design coordination through construction and commissioning. Position Overview The MEP Project Manager will be responsible for overseeing all aspects of MEP delivery, ensuring systems are designed, coordinated, and installed in line with project requirements, budget, and schedule. Acting as a key liaison between clients, design teams, and contractors, you will play a critical role in ensuring technical alignment, constructability, and successful integration of building systems throughout the project lifecycle. Key Responsibilities • Manage MEP scope from design development through construction and commissioning, • Coordinate with architects, engineers, consultants, and contractors on all MEP-related matters, • Review design documents, specifications, and drawings for completeness and constructability, • Monitor project budgets, schedules, and performance related to MEP systems, • Oversee procurement, subcontractor coordination, and installation activities, • Manage RFIs, submittals, and change orders related to MEP packages, • Conduct site visits to monitor progress, quality, and compliance, • Support testing, commissioning, and handover processes, • Identify risks and provide solutions to maintain project objectives Ideal Candidate Profile We are seeking a well-rounded MEP professional with strong technical expertise and the ability to manage complex building systems in a fast-paced environment. • Degree in Mechanical, Electrical, or Building Services Engineering (or related field), • Proven experience managing MEP scopes on commercial or large-scale construction projects, • Strong understanding of HVAC, electrical distribution, plumbing, and building systems integration, • Experience working in a consultancy, contractor, or client-side environment, • Ability to read and interpret technical drawings and specifications, • Strong communication and stakeholder management skills, • Detail-oriented with strong problem-solving capabilities Compensation & Benefits • Competitive salary (dependent on experience), • Discretionary bonus, • 401(k), • Medical, dental, and vision insurance, • Generous PTO

Director of Capital Project Management Location: New York, NY (with travel) Seniority: Director Level Project Size: $1M–$30M+ About the Role We’re seeking a Director of Project Management to lead a diverse portfolio of capital projects across the US. This is a high‑visibility role overseeing multiple concurrent initiatives, ranging from commercial fit‑outs to large‑scale capital improvements. The ideal candidate thrives in fast‑paced environments, brings deep construction expertise, and has a proven track record delivering complex projects on time and on budget. Key Responsibilities • Lead and manage a large portfolio of CAPEX, fit‑out, and capital improvement projects across multiple sites., • Oversee 3rd party project managers, external consultants, and contractors to ensure seamless execution., • Develop project strategies, budgets, schedules, and risk mitigation plans for initiatives ranging from $1M to $30M+., • Ensure adherence to design standards, construction quality, safety protocols, and regulatory requirements., • Partner closely with internal stakeholders, landlords, architects, engineers, and GC/CM partners., • Provide executive‑level reporting, forecasting, and portfolio‑level insights., • Drive continuous improvement in project delivery processes, vendor performance, and cost management., • Travel as needed to project sites across the US. Qualifications • 7+ years of experience working for a General Contractor (GC), Construction Manager (CM), or owner with strong field and project/program delivery knowledge., • Demonstrated success managing multiple concurrent construction projects in commercial, retail, hotel, or restaurant environments (or similar)., • Deep understanding of construction means and methods, scheduling, budgeting, and contract administration., • Experience overseeing projects in the $1M–$30M+ range., • Strong leadership skills with the ability to mentor teams and influence cross‑functional partners., • Excellent communication, negotiation, and stakeholder‑management abilities., • Based in New York City, with the ability to travel as required. Why Join Us • Opportunity to lead a high‑impact capital program with significant visibility., • Work on diverse, complex projects that shape the built environment across the US., • Collaborative culture with room to innovate and elevate project delivery standards., • Competitive compensation and benefits package. Compensation C$150,000 - $175,000 Base + Bonus + Benefits

Construction Inspection Manager Location: Secaucus, NJ Employment Type: Full-Time Salary: $94,000 – $122,000 per year Work Environment: Field and Office-Based Supervisory Responsibility: Yes – Construction Inspection Team Position Summary We are seeking an experienced Construction Inspection Manager to lead construction inspection operations for civil and infrastructure projects. This role is responsible for supervising inspection staff, coordinating project execution, ensuring quality control, and supporting successful delivery of municipal construction projects from preconstruction through close-out. The ideal candidate will bring strong leadership experience in civil infrastructure construction, including roadway, utility, and site development projects, along with the ability to manage teams, schedules, and field operations effectively. Key Responsibilities • Manage daily operations of construction inspection staff and project activities, • Coordinate transition from design to construction, including constructability reviews, • Assign staff and manage project schedules and resource planning, • Ensure compliance with contract requirements, safety standards, and quality expectations, • Review and approve contractor payment certifications and project documentation, • Identify and manage field changes, including cost and schedule impacts, • Maintain communication with project managers, engineers, and stakeholders, • Provide mentorship, performance feedback, and training to inspection personnel, • Support hiring and workforce planning to meet project demands, • Ensure timely project completion and documentation close-out Required Qualifications • 15+ years of experience in construction inspection, civil construction, or infrastructure project management, • Demonstrated experience supervising construction inspection or field teams, • Experience supporting municipal or public infrastructure projects, • Strong leadership, communication, and organizational skills, • Ability to manage multiple projects and priorities simultaneously, • Proficiency with Microsoft Office and construction or inspection management software Preferred Qualifications • Associate’s or Bachelor’s degree in Construction Management, Civil Engineering, or related field, • Experience with infrastructure projects such as:, • Roadway and pavement rehabilitation, • Stormwater and drainage systems, • Sanitary sewer and water utilities, • Land development or site construction, • Experience with contract administration and construction scheduling, • Experience mentoring field staff or managing inspection teams Preferred Certifications • OSHA 10 or OSHA 30, • NICET Certification (Levels I–III), • ACI Field Technician Certification, • Traffic Control / Work Zone Safety Certification, • Confined Space Training Work Environment • Combination of field and office work, • Regular site visits to active construction projects, • Exposure to outdoor weather conditions, • Occasional lifting up to 25 pounds, • Collaborative, team-oriented construction environment Regards

Company Description GMA Engineering provides key services on large mega-projects, including Program Management, Construction Management, Inspection, and Structural Analysis and Design. GMA works with major clients such as the MTA, PANYNJ, AMTRAK, NYCDOT, NYSDOT, delivering comprehensive project life-cycle solutions. With a commitment to quality and innovation, GMA is known for its expertise and reliability in the engineering sector. Role Description This is a full-time, on-site role located in Newark, NJ for a Project Management Specialist. The responsibilities include overseeing project planning, managing schedules, monitoring and reporting project progress. The role involves communicating effectively with stakeholders, analyzing project metrics, and supporting program management activities to achieve successful outcomes. Qualifications • Strong Project Management and Program Management skills, • Expertise in Project Planning and Analytical Skills to evaluate and optimize project performance, • Effective Communication skills for stakeholder coordination and reporting, • Attention to detail and commitment to delivering high-quality outcomes, • Proficiency with project management tools and software is a plus, • Bachelor’s degree in Engineering, Project Management, or a related field preferred, • Experience in the transportation or infrastructure sector is highly advantageous

Your new company HAYS Recruitment is currently partnered with a full service engineering, design, and consulting firm. We are looking for a driven and detail-oriented Senior Commissioning Engineer who can lead the execution of projects and provide expert consultation. Join this dynamic engineering team, who are committed to delivering high-value energy solutions. Your new role • Plans, schedule, conduct and coordinate detailed phases of a project independently with other engineering disciplines, • Provide guidance and mentorship for junior level staff, • Work on innovative projects that balance cost-saving measures with long-term sustainability goals, • Provide technical development of proposals and external presentations for clients and regulatory agencies, • Monitor progress and performance on projects to ensure efficient production What you'll need to succeed • Bachelor's degree in Mechanical Engineering or related field required, • PE License required, • 10+ years of engineering experience relating to commissioning, • Must be able to understand construction documents, and fully understand the design and intended operation of the associated mechanical systems, • Experience with BAS systems, • Advanced proficiency with AutoCad, Revit, MicroStation, • Ability to demonstrate leadership skills and effectively work in a collaborative environment; proven ability to lead a team What you'll get in return • Compensation: $105-126K base, • Significant opportunity for bonus, • 401K, • Generous PTO package, • Full medical benefits, • Opportunity to work on impactful energy projects What you need to do now If you're interested in this Senior Commissioning Engineer role, click 'apply now' to forward an up-to-date copy of your resume, or call us now. If this job isn't quite right for you, but you are looking for a new position, please contact us for a confidential discussion about your career.

Job Title: Manufacturing Project Engineer – Factory Relocation Duration: 09-12 Months Contract (Possibility of Extension) Location: Delanco, NJ Pay rate: $65-70 per hour on w2, without benefits/holidays/vacation Position Summary We are seeking a Contract Engineer to support the planning and execution of a large-scale manufacturing facility relocation. This role will be responsible for managing individual project workstreams, coordinating across cross-functional internal teams, and working closely with suppliers, contractors, and hourly employees to ensure a safe, efficient, and disruption-free move. The ideal candidate has hands-on manufacturing engineering experience, strong project coordination skills, and prior involvement in factory or equipment relocations. Key Responsibilities • Own and execute assigned factory move workstreams, from planning through execution and closeout, • Develop and maintain detailed project plans, schedules, and task lists for equipment, layout, utilities, and support areas, • Coordinate activities with internal customers including operations, maintenance, quality, safety, IT, and supply chain, • Interface with external suppliers, contractors, riggers, and service providers to align scope, timing, and execution, • Support equipment disassembly, relocation, installation, and start-up activities, • Coordinate with hourly manufacturing and maintenance employees during move events and production transitions, • Apply lean manufacturing principles to layout design, material flow, and process transitions, • Identify risks to safety, quality, delivery, and cost; develop and execute mitigation plans, • Support documentation updates including layouts, standard work, utility plans, and move checklists, • Participate in and support move events, including off-shift or weekend activities as required, • Track progress, issues, and action items; provide regular status updates to project leadership Required Qualifications • Bachelor’s degree in Engineering (Manufacturing, Industrial, Mechanical, or related discipline) or equivalent experience, • 5+ years of manufacturing engineering or related experience, • Demonstrated experience supporting or leading manufacturing facility moves, equipment relocations, or major line transfers, • Strong understanding of lean manufacturing concepts (layout optimization, waste reduction, material flow), • Proven ability to manage multiple tasks and priorities in a fast-paced, execution-focused environment, • Strong communication and coordination skills across salaried, hourly, and external teams, • Comfortable working on the manufacturing floor and in construction/industrial environments Preferred / Nice-to-Have Qualifications • Experience in furniture manufacturing or furniture systems, • Experience coordinating utilities (electrical, air, water, dust collection, etc.) during equipment moves, • Familiarity with rigging, installation sequencing, and production start-up support, • Prior contract or project-based engineering experience Thank you!

The Designer is responsible for the design of men’s activewear and active lifestyle apparel for an industry-leading brand. This role partners closely with the Design Manager to deliver strong, market-relevant design solutions tailored to key retail partners. Responsibilities: • Continuously research trends in concept, color, mood, and styling through forecasting and trend services. Shop the market and refine ideas to meet the specific needs of off-price and club retailers in accordance with the design calendar., • In partnership with the Design Manager, establish the overall tone and direction of the product line by interpreting market trends, forecasting insights, and retailer focus while maintaining brand identity., • Design silhouettes aligned with the overall design direction and merchandising plan, with a strong client-focused approach., • Collaborate in the development of color palettes and the selection of fabrics and trims., • Create sketches and CADs using Adobe Illustrator., • Develop detailed tech packs for costing, sampling, and production using Centric PLM., • Communicate brand vision and creative direction to the Design Assistant to ensure consistency and clarity throughout the development process., • Maintain clear communication regarding project status and deadlines with Merchandising, Sales, Design, Technical, and Production teams., • Ensure design inspiration is developed and presented in a timely manner to licensing and retail partners, incorporating feedback into the line as needed., • Present initial design concepts and proposals to internal design, merchandising, and sales teams., • Partner with the Graphics team to ensure all graphics align with seasonal direction and remain cohesive with brand and retailer requirements., • Develop SKU plans in collaboration with Merchandising and Sales., • Ensure sampling at all stages of development aligns with the approved merchandising plan., • Work directly with overseas offices throughout the development process., • Ensure trim development is completed and approved on schedule to support sample timelines., • Collaborate with Merchandising and Sales to gather feedback from sales teams and retailers, ensuring business objectives are met without compromising design integrity., • In partnership with the Design Manager, evaluate and resolve development and production issues that impact product aesthetics., • Attend fittings and review samples to ensure execution aligns with the design vision. Qualifications: • 5+ years of design experience, • Bachelor’s degree in Fashion Design or a related field, • Proven design experience in men’s apparel and activewear, • Strong knowledge of fabrications, trims, and apparel construction, • Proficiency in Adobe Illustrator, Photoshop, and Microsoft Office, • PLM experience preferred, • Strong communication and problem-solving skills, • High level of integrity with a strong work ethic and proactive attitude, • Excellent attention to detail and organizational skills, • Ability to manage multiple projects, timelines, and priorities Annual salary range starting at $70,000 The disclosed salary range is commensurate with experience and does not reflect the total compensation package. Our associates have access to other valuable benefits that our Human Resources team is happy to share with candidates during the interview process.

Senior Art Director – Book Publishing & Typography The luxury book publisher founded by Prosper and Martine Assouline has published over 2,000 titles worldwide across architecture, art, design, fashion, gastronomy, lifestyle, photography, and travel. We are seeking a highly experienced Senior Art Director with deep expertise in book publishing, typography, and print production to lead the design and creative development of our luxury illustrated titles. This role is ideal for a designer who understands books as objects of culture—where typography, pacing, materials, and imagery work together to create timeless, collectible works. This is a full-time, in-office position (5 days per week) based in our NYC office. The ideal candidate must present a portfolio demonstrating significant book publishing experience, including completed titles and strong typographic systems. Position Overview Reporting directly to the Creative Director, the Senior Art Director will oversee approximately 15–20 luxury book projects annually from concept through final print production. This role requires mastery of typographic design, visual storytelling, and physical book construction, as well as the ability to collaborate with editors, publishers, production teams, and external clients. In addition to leading internal creative development, this individual will participate in client meetings, pitches, and presentations, confidently articulating design direction and creative rationale. Key Responsibilities Creative & Design Leadership • Lead the creative direction and design of high-end illustrated books from concept to print, • Develop sophisticated typographic systems, grids, and layouts that elevate storytelling and reinforce brand identity, • Establish visual narratives that balance imagery, pacing, white space, and hierarchy, • Create and oversee templates, cover concepts, and interior architecture, • Maintain exceptional attention to detail across typography, kerning, tracking, leading, and print finishes, • Instruct and mentor designers in executing creative direction Client & Cross-Functional Collaboration • Partner with Creative Director, Editors, and Publishers from initial vision through publication, • Participate in client meetings, pitches, and creative presentations, • Clearly articulate design concepts and defend creative decisions with strategic rationale, • Liaise closely with Editorial, Communications, Production, and external partners Production & Technical Excellence • Prepare and oversee print-ready mechanicals for offset production, • Collaborate with printers on materials, finishes, and color accuracy, • Direct in-house photo and video shoots when required, • Conduct image research and oversee photo selection, • Manage file routing, archiving, and reprint updates, • Ensure projects meet deadlines without compromising design integrity Required Qualifications • 7+ years of professional experience in book publishing and print design, • Demonstrated portfolio of completed, printed books (luxury, art, fashion, architecture, or similar highly visual categories preferred), • Advanced mastery of typography, layout systems, and visual hierarchy, • Deep understanding of offset printing, materials, binding, and production processes, • Exceptional aesthetic judgment and attention to detail, • Strong communication and presentation skills, particularly in client-facing settings, • Ability to manage multiple projects simultaneously in a deadline-driven environment, • Advanced proficiency in Mac OS and Adobe Creative Suite (InDesign, Photoshop, Illustrator) Portfolio submission is required. Applications without substantial book publishing and typography samples will not be considered. You Will Thrive in This Role If You Are: Conceptually Rigorous – You approach book design as both narrative and object, considering structure, typography, materials, and experience holistically. Typographically Obsessed – You care deeply about letterforms, spacing, rhythm, and refinement. Client-Confident – You are comfortable presenting creative ideas and engaging directly with partners. Detail-Oriented – You uphold the highest standards in production accuracy and finishing. Collaborative Yet Autonomous – You lead decisively while fostering strong studio relationships. Motivated & Inquisitive – You continuously refine your craft and remain curious about culture, design, and publishing. The appointed candidate will be offered a salary within the range of $120,000–$155,000 annually, pursuant to the New York City Salary Transparency Law. This range represents a good-faith estimate for this role. Assouline is an equal opportunity employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.

OVERVIEW Our client is a nationally recognized architecture and interiors studio celebrated for its refined design sensibility and deeply personalized approach to residential environments. For over two decades, the firm has built an enduring reputation for creating tailored, timeless spaces that merge craft, innovation, and livability. With an expanding portfolio of award-winning private residences across the country, the practice has become known for projects that balance architectural rigor with warmth, comfort, and a keen attention to detail. As the practice continues to evolve, they are seeking a Design Director to lead and elevate their interiors team. This role provides both creative and operational leadership, driving design excellence, ensuring seamless project delivery, and fostering a collaborative, high-performing culture. The Design Director will report to the firm's partners and work closely with design and architectural leadership to shape the next evolution of the studio's interiors practice. This is an opportunity to influence the creative direction of a respected firm while building and mentoring a talented team in a design-driven, collaborative environment. RESPONSBILITIES Design Leadership & Project Oversight • Provide creative direction for all single-family residential interiors, guiding projects from concept through installation, • Maintain design integrity across all phases, ensuring each project reflects the studio's aesthetic and quality standards, • Partner with architectural and technical teams to develop cohesive, integrated design solutions, • Review and refine FF&E documentation, • Participate in material reviews, design charrettes, and construction coordination as needed, • Oversee multiple concurrent projects, balancing creative rigor with operational efficiency and profitability, • Attend site visits and client meetings as required Client Engagement & Relationship Management • Serve as the primary point of contact for clients, leading design presentations, progress meetings, and on-site reviews, • Build and sustain long-term relationships through exceptional service, communication, and design delivery, • Manage expectations and maintain alignment between client vision, budget, and design intent, • Contribute to business development efforts in tandem with Interior Design Principal Team Leadership & Studio Management • Lead and mentor a team of designers, project managers, and procurement specialists, • Define team structure, assign project roles, and monitor workload distribution and performance, • Provide hands-on guidance and professional development opportunities, fostering a culture of collaboration and accountability, • Ensure operational excellence through clear processes, documentation standards, and quality control, • Partner with firm leadership on staffing, resourcing, and financial planning for the interiors discipline SKILLS & REQUIREMENTS • Professional degree in Interior Design or related field, • 8+ years of experience in high-end single-family residential interiors, with experience autonomously leading projects and teams, • Proven ability to lead complex, custom residential projects from design through installation, • Exceptional design sensibility and aesthetic judgment, with deep knowledge of materials, detailing, and fabrication, • Strong communication and presentation skills; confident leading clients and internal teams, • Demonstrated experience managing budgets, timelines, and staffing for multiple projects concurrently, • Proficiency in AutoCAD and Adobe Creative Cloud; Revit experience a plus, • Willingness to travel as required for client meetings and site visits

IA Interior Architects translates client goals, brand and culture into powerful environments built around people, processes, technologies and business drivers. Our clients in diverse markets worldwide require high-performance, visually compelling and sustainable environments to move their enterprise forward, support their culture, engage their customers and staff, integrate technology and drive efficiencies. As architects, designers, workplace strategists and environmental specialists in the largest global architecture firm concentrating exclusively on interiors, we help clients articulate and align their business strategies and core values with the dynamic use of space. Our team members are collaborative, creative, professional, expert and entrepreneurial. Joining our team requires skill, daring, leadership, teaming, humor and a love of technical design. We are presently searching for an Architectural Designer/Job Captain for our New York City studio. The Architectural Designer is responsible for leading all design phases for interiors projects, establishes the vision, leads the team, and has extensive client interaction. Specific responsibilities will include: • Assists in overall technical design for project, • Directs staff to complete design and technical drawing, • Reviews design and technical drawing of other more junior designers, • Review of engineering drawings to ensure they comply with design solution, • Works with technical staff to resolve inconsistencies in drawings, • Aid in the creation of floor plans, elevations, architectural and millwork details, and overall design intent sets for the Request for Proposal (RFP) process and distribution to architects., • Review and redline construction documents, shop drawings, and related submittals, • Produces, reviews and finalizes space plans for projects, • Extensive knowledge of detailing and finalizes details on projects, • Reviews and produces final cost estimates, • In unusual circumstances may be required to assist with support for field surveys, • Manages overall design budget, • Ensures adherence to set budget and immediately informs PM and/or client of any potential variances to the budget, • Manages the work of other Designers, • Oversees tasks and provide feedback on work product, • Organizes and conducts client interviews to determine space needs and requirements, • Continues to provide needed information to client on design specifications; good working knowledge of Affinity program tool Qualifications: • Graduate of architecture school: equivalent experience may be substituted, • 5+ years’ experience in corporate or workplace design projects preferred, • Strong Revit Skills Knowledge, Skills, and Abilities: • Extensive knowledge of design principles, • Extensive knowledge of store planning methodology, • Proficient with the concepts of furniture layout, • Expert sketching and rendering skills, • Expert architecture detailing skills, • Extensive knowledge of CDs and procedures, • Extensive knowledge of building systems, codes and ADA requirements, • Extensive knowledge of contract administration, • Commitment to support projects through peaks and valleys, • Intermediate MS Office Suite skills, • Advanced Revit skills, • Advanced Adobe Creative Suite skills, • Affinity Program skills or equivalent, • Extensive verbal and written communication skills, • Extensive presentation and graphic communication, • Demonstrated ability to manage and lead staff through a combination of direct authority and subject matter expertise Salary Range: $70,000 - $85,000 (based on education, licensing and industry experience)

We are looking for an experienced Senior Technical Designer to join our growing Technical Design team and support our activewear business. Our ideal candidate should be a team player with excellent attention to detail and flexibility to work in a fast-paced environment. This is an opportunity to be on a talented Technical Design team and work on a leading brand in a variety of retailers! Responsibilities: • Partner with Design and create specs/construction sheets for proto and fit samples utilizing blocks., • Schedule and lead fit sessions, ensuring fit, sizing, construction, and quality are consistently achieved in line with standards; Evaluate garments to determine compliance with specs, • Communicate with vendors regarding tech pack questions; Provide appropriate recommendations in collaboration with cross-functional teams; Serve as a technical problem-solving expert., • Manage and communicate product fit changes in a timely manner to ensure workflow is maintained within related systems., • Track and manage samples daily, work with Design, and ensure deadlines are met, • Maintain block library for brand in 2D, 3D, or physical samples, • Support the creation of development from initial concepts through pre-production samples., • Communicate with team leadership and production department when issues are found; responsible for correction and communication back to the vendors with solutions and a clear record. Qualifications: • 5 years+ of experience in Technical Design or related field, • Experience in garment construction, pattern making, fitting, specs, and grading, • Experience with performance apparel is a plus, • Proficient with PLM, Microsoft suite, Adobe, • Experience and/or strong desire to learn 3D CLO Software, • Ability to work in a hybrid environment Annual salary range starting at $95,000+ The disclosed salary range is commensurate with experience and does not reflect the total compensation package. Our associates have access to other valuable benefits that our Human Resources team is happy to share with candidates during the interview process.

Director of Implementation & Onboarding | NYC Fully In Office | $160K-$175K + Equity About the Company Our client is building the next-generation operating system for commercial HVAC, electrical, and plumbing suppliers and subcontractors. Over the past year, their V1 quoting product has scaled to thousands of quotes completed weekly, doubled revenue six weeks into 2026, and gained adoption across many of the top suppliers in North America. Fresh off a $14M Series A backed by leading construction tech investors, they are entering their next phase of growth and are looking for a Client Experience Leader to support their Client Success motion. You’ll work directly with the Client Success (CS), Product, and Sales teams to support new and existing clients and build the systems that will define the company’s client onboarding experience. They are transforming the $250B HVAC industry with AI-native software, an industry still largely untouched by modern tools. This is your chance to get in early. The Role They’ve hit strong product market fit and are now scaling how they onboard clients across more complex implementations as their software and client base expands. They are hiring a Director of Implementation & Onboarding to help redefine this critical function. You’ll run implementation end to end, ensuring clients get up and running quickly in a way that fits their unique operational needs. This role is a balance of building repeatable processes and playbooks, while leading a team to deliver thoughtful, consultative, and technical implementations that adapt to how each client operates and drive real outcomes. You’ll lead a team of Implementation Managers who bring deep mechanical engineering expertise, layering in the right level of SaaS rigor and structure without losing flexibility. You’ll work closely with Client Success, Product, Sales, and Engineering to remove friction and scale onboarding as the company grows. What You’ll Do • Own and scale the end-to-end implementation and onboarding function, • Build repeatable workflows, playbooks, trainings, and systems while supporting highly custom client implementations, • Define and operationalize onboarding across areas like organizational setup, workflow design, product configuration, and user training, • Lead and grow a team of onsite and remote Implementation Managers, • Coach domain experts and translate their knowledge into scalable processes, • Partner with Sales and CS on handoffs and implementation scoping, • Work closely with Product and Engineering to identify friction points and influence the roadmap, • Drive time to value, product adoption and usage, implementation efficiency, and consistency across all accounts, • Establish key metrics, forecasting, and operational visibility across implementations, • Deliver scalable training and enablement across virtual and onsite environments, • Act as an escalation point for complex or high-priority client implementations, • Travel onsite once per month to support and elevate client onboarding and implementation A Typical Week Might Include • Designing and rolling out a new onboarding playbook for enterprise clients, • Reviewing implementation pipelines and identifying bottlenecks, • Partnering with Product on recurring implementation blockers, • Coaching team members on managing complex client rollouts with new Analytics API requirements, • Jumping into a high-stakes client onboarding to ensure a successful kickoff What Success Looks Like 2 Weeks Ramp on the product and current implementations, and go onsite with Implementation Managers to see client environments and onboarding firsthand 30 Days Identify key gaps and begin documenting and implementing core process changes; get hands on in active implementations to drive immediate impact 60 Days Stand up a high-caliber, scalable implementation process; drive consistency across onboarding, begin hiring to support growth, and establish a strong operational foundation for the team Who You Are • 5+ years of Implementation / Onboarding experience plus people management, • You’ve scaled or led an implementation or onboarding team in a complex SaaS environment, • You have experience managing complex, multi-stakeholder deployments, ideally involving configurable products and/or custom workflows, • You’ve implemented products that require deep configuration and adaptation to existing client processes, not just plug-and-play onboarding, • You’re highly operational and know how to build systems, not just manage projects, • You have experience leading specialized or domain expert teams, and know how to balance structure with autonomy, • You’re comfortable working cross-functionally with Product, Engineering, Sales, and Client Success, • You can translate between technical product teams and industry practitioners, • You balance speed and quality in a fast-paced, high-growth environment, • You’re hands on and willing to dive into the details when needed, • You’re structured, metrics-driven, and focused on continuous improvement Bonus Points If You Have • Experience in construction tech, industrial, or legacy industries, • Experience building implementation functions from startup / early stage through scale Compensation & Benefits • Salary: $160K-$175K depending on experience, • Equity: Meaningful equity grant depending on experience, • Benefits: Medical, dental, and vision coverage, • Perks: Free lunches and dinners This is a full-time, onsite role based in NYC’s Flatiron District, steps from Madison Square Park and Union Square. You’ll work side by side with a high-performing team, solving real problems in real time, and shaping the future of an industry largely untouched by AI.

Retail Project Architect | Mid-Level (5+ Years) 📍 New York, NY | Full-Time | On-Site Our client is an established New York City–based design firm specializing in commercial buildings, retail, and restaurant projects. Their work includes new construction, adaptive reuse, and interior fit-outs for clients ranging from national retailers to restaurateurs, private owners, and developers. We are seeking an Project Architect with 5+ years of professional retail experience to join our team. The ideal candidate has strong technical expertise, proven project coordination skills, and a solid background in commercial design. Responsibilities • Develop design concepts, space plans, and full construction document sets., • Ensure drawings are detailed, accurate, and aligned with design intent for permit, bid, and construction phases., • Coordinate with MEP, structural, and civil consultants throughout all project phases., • Review and respond to landlord, client, and agency comments., • Handle RFIs, addendums, bulletins, and site visit field reports., • Oversee construction administration to maintain design quality and compliance. Qualifications • Bachelor’s degree in architecture or interior architecture., • Minimum 5 years of professional experience in construction documents, detailing, and CA., • Strong proficiency in Revit preferred and AutoCAD., • Excellent communication, organization, and multitasking skills., • Ability to work independently and collaboratively within a team. What We Offer • Competitive compensation, commensurate with experience., • Comprehensive benefits including medical insurance, 401(k), paid holidays, vacation, and sick time., • A collaborative and rewarding work environment that supports professional growth and advancement.

New York City, NY – Project Manager (Construction | Financial Services Client) Salary: $120,000 - $170,000 We are representing a leading construction consultancy seeking a Senior Project Manager to support a major financial services client on high-profile real estate and capital projects across New York City. This position will see you embedded on the client side, overseeing the full lifecycle of projects ranging from corporate interiors and refurbishments to complex capital improvements within an active banking environment. The Role Acting as the client’s representative, you will take ownership of projects from early planning and design coordination through to construction delivery and closeout. You’ll be responsible for ensuring projects are executed efficiently, aligned with business objectives, and delivered within schedule and budget constraints. This role requires someone who can operate at both a strategic and hands-on level — managing stakeholders, driving decision-making, and identifying opportunities to improve project outcomes and deliver added value. What You’ll Be Doing • Leading end-to-end project delivery across multiple concurrent assignments, • Managing budgets, contracts, and financial performance throughout the lifecycle, • Coordinating design teams, consultants, and contractors, • Overseeing procurement, bidding, and contract administration processes, • Monitoring project progress, risks, and performance against key milestones, • Facilitating stakeholder meetings and driving clear communication across all parties, • Supporting governance, reporting, and internal client approvals within a corporate environment, • Identifying efficiencies, cost-saving opportunities, and value-driven solutions What We’re Looking For • Background in construction, project management, or built environment disciplines, • Experience delivering projects within commercial, corporate, or financial services environments, • Strong understanding of construction delivery, contracts, and project controls, • Proven ability to manage multiple stakeholders in a client-facing role, • Confident leading projects from concept through to completion, • Strong communication skills with a professional, solutions-oriented approach Why This Role • Direct exposure to a major banking client portfolio, • Opportunity to work on high-value, fast-paced projects in NYC, • Join a consultancy environment with a strong pipeline of work, • Competitive compensation package with bonus potential 📩 If you’re a Project Manager looking to step into a more client-side, strategic role within a fast-moving sector, get in touch to learn more.

Senior Product Development Manager Full-time New York, NY Company Overview At Parallelle, we are redefining the art of organization for life on the move. What began with The Travellers, our patented and thoughtfully designed beauty bag, has evolved into a broader mission rooted in intentional design, innovation, and everyday functionality. Built on the belief that organization creates ease, confidence, and clarity, our products are designed to simplify routines while elevating the way people move through their day. From our patented folding technology to our expanding product line, every detail reflects a commitment to craftsmanship, originality, and purpose. Founded by Annie Fan, whose 20 plus years of experience designing for leading beauty brands informs every product, Parallelle was created to solve real, everyday challenges. Today, we continue to innovate with the goal of helping our customers Arrive Organized and experience life with greater ease, style, and intention. Job Overview We are looking for a Senior Manager of Product Development to join Parallelle at a pivotal moment in our growth. This is a newly created 4-month contract role, with a clear path to full-time, built-in response to the scale and ambition of our expanding product roadmap. Reporting to our VP of Production & Supply Chain and working closely with our Founder and Senior Designers, you will own the full development lifecycle from design handoff through factory approval. That means tech packs, sample rounds, vendor communication, material sourcing, costing, and launch calendars, managed with precision and urgency. The right person has done this before in a startup environment, holds themselves to a high standard, and is ready to build the PD infrastructure that allows a growing brand to scale. Key Responsibilities Product Development & Sample Management • Own the end-to-end development process across all categories — from design handoff through final production ready approval, managing tech packs, sample rounds, and factory feedback with precision and urgency, • Maintain a master development tracker across all active styles, giving every department real time visibility into where each product stands Factory & Vendor Communication • Serve as the primary point of contact with overseas factories, owning all follow up independently, building strong vendor relationships that support faster turnarounds, consistent quality, and proactive problem solving across both existing and new categories Calendar & Timeline Management • Own the product development calendar across all active styles, ensuring every milestone is tracked, communicated, and aligned with production order deadlines and launch windows, • Identify risks before they become delays by flagging the issue, the impact, and a proposed solution in the same communication Material & Hardware Development • Manage lab dip approvals, material submissions, and hardware sourcing, maintaining an organized material library with clear sourcing, costing, and lead time records, • Partner with designers to translate creative references into technically viable, cost-effective specifications that preserve the brand's premium standards, • Quality & Testing: Oversee wear and stress testing across zippers, straps, seams, and hardware to ensure products meet real world performance demands and any applicable regulatory or safety standards Cross-Functional Collaboration & Process Building • Work closely with Senior Designers, the Production Manager, and the Revenue Director to ensure seamless handoffs, accurate launch timing, and no surprises across teams, • Establish and document PD processes, templates, and workflows where they do not yet exist. This role will define how product development functions at Parallelle, • Mentor the Associate Product Developer, building her capacity and enabling stronger execution across the team Experience and Skills • Degree in Accessories Design, Industrial Design, or a related field is preferred; experience that bridges technical product development and design thinking is highly valued, • 5 to 8 years of experience in product development, with a strong background in accessories, handbags, leather goods, or travel goods. Experience in bags is strongly preferred, • Deep technical knowledge of bag and accessories construction: materials, hardware, linings, stitching, closures, and manufacturing tolerances, combined with an industrial design sensibility that identifies innovative and unexpected material combinations to elevate the product beyond convention, • Proven experience managing overseas factory relationships, with strong knowledge of production calendars, lead times, and vendor communication best practices, • Experience managing multiple development timelines simultaneously across different product categories, • Proficiency in Adobe Illustrator for tech pack creation and revision, • Strong costing experience with an understanding of how design decisions affect margin, • Highly organized, self-directed and comfortable building process from scratch in a lean environment, • Strong sense of urgency without sacrificing accuracy. This role requires both speed and rigor, • Experience working with or alongside a creative founder or CCO with high standards is a meaningful plus, • Approaches each prototype not just as a technical checkpoint but as a creative problem to solve, challenging assumptions about how a bag is built and exploring alternative construction methods when standard approaches fall short What success looks like in role: • Sample rounds are reduced. Clear, complete feedback the first time means fewer back and forth rounds, • The development calendar is a live, trusted document that every department can rely on, • Designers are focused on designing and not chasing factory updates or writing vendor emails, • The VP of Production and Founder/CCO have high confidence in what is on track and early visibility into anything that is not, • New categories (weekenders, work totes, wearables, luggage) are developed with a replicable, well documented process that the team can build on, • The Associate PD is growing, receiving real mentorship and taking on increasing ownership, • Lead times are getting shorter, not longer, as the business scales Salary Disclosure and Benefits This is a 4 month contract role with a strong opportunity to transition to full time for the right person. The contract rate for this position is equivalent to an annualized salary range of $95,000 – $120,000, commensurate with experience. Should the role convert to full time, Parallelle offers a comprehensive benefits package including 100% employer paid medical coverage, PTO, and additional perks aligned with company policies.

Senior Landscape Architect New York, NY About the Opportunity A design-led, internationally recognised landscape architecture practice is seeking a Senior Landscape Architect to join its New York studio. This is an opportunity to play a key leadership role within a collaborative environment, contributing to high-profile urban, public realm, and infrastructure projects across the U.S. and internationally. Position Overview As a Senior Landscape Architect, you will lead the design and delivery of complex projects while supporting studio leadership and growth. You’ll manage teams, oversee technical quality, and act as a key interface with clients, agencies, and project stakeholders. What You’ll Be Doing Project Leadership & Delivery Lead projects through all design and construction phases Oversee design quality, technical documentation, and project outcomes Project & Client Management Manage client relationships and act as a primary point of contact Coordinate with multidisciplinary consultants and project stakeholders Studio Leadership Support studio operations, mentoring, and team development Contribute to recruitment, business development, and strategic initiatives Design Oversight & Collaboration Participate in design reviews, critiques, and project kick-offs Provide guidance and peer review across project teams, including international work What We’re Looking For Essential Skills & Experience • 10+ years’ experience in landscape architecture or related practice, • Proven track record leading projects from concept through delivery, • Strong design, technical, and project management capabilities, • Excellent communication and stakeholder management skills Qualifications • Degree in Landscape Architecture or a related field, • Professional licensure in New York State (or ability to obtain), • Technical Skills, • Proficiency in AutoCAD and Adobe Creative Suite, • Experience with 3D modelling tools (e.g. Rhino, SketchUp, Lumion), • Working knowledge of Microsoft Office; Revit/BIM beneficial, • Desirable Experience, • Experience delivering civic or infrastructure projects, particularly in NYC, • Familiarity working with public agencies and large-scale clients, • International project exposure (e.g. Middle East, Asia), • Strong knowledge of construction documentation, materials, and planting design, • Experience leading large, multidisciplinary teams

POSITION SUMMARY The Assistant Designer supports the design team across all womenswear categories within a contemporary brand environment, contributing to the development of seasonal collections from concept through production. This role reports directly to the Senior Designer of Sportswear and the Senior Designer of Denim, and requires a strong eye for detail, technical knowledge of garment construction, and the ability to manage multiple projects in a fast-paced setting. KEY RESPONSIBILITIES · Support the design team through all stages of the product lifecycle, from initial concept to final production across multiple categories · Create and update technical sketches and CADs using Adobe Illustrator · Assist in building and maintaining accurate, detailed tech packs for development and production · Conduct trend, market, and competitor research relevant to the contemporary womenswear space; compile and present findings · Organize and maintain design boards, seasonal concepts, and reference materials · Review and track development submissions, including lab dips, fabrics, trims, color cards, and washes; provide clear and concise comments for revisions · Communicate with sample rooms and cross-functional teams to support style development and ensure timelines are met · Maintain and update line sheets, CADs, color standards, and seasonal charts across all categories · Organize and archive design assets, including prints, purchased samples, development swatches, and bulk materials · Assist in preparing materials for internal design reviews, presentations, and sales meetings · Track, organize, and manage incoming and outgoing samples, ensuring proper labeling, organization, and storage QUALIFICATIONS · Bachelor’s degree in Fashion Design · 1–3 years of experience in the womenswear apparel industry (contemporary experience preferred; internships considered) · Strong understanding of fabrics, garment construction, and fit across categories including sportswear and denim · Proficiency in Adobe Illustrator, Photoshop, and Microsoft Excel · Excellent organizational skills with strong attention to detail · Ability to manage multiple tasks and meet deadlines in a fast-paced, collaborative environment · Strong communication skills and a team-oriented mindset · Proactive, adaptable, and eager to learn within a contemporary fashion brand setting

Job Title: Data Scientist Duration: 6 Months to hire Location: Newark, NJ Job description: As a Data Scientist supporting U.S. Businesses (USB) Service, Data and Technology organization, you will partner with our diverse team of Engineers, Economists, Computer Scientists, Mathematicians, Physicists, Statisticians and Actuaries tasked with mining our industry-leading internal data to design, build, and deploy production-grade AI capabilities for our businesses. The role requires a rare combination of sophisticated AI engineering expertise; business acumen; strategic mindset; client relationship skills, problem solving; and a passion for generating business impact. This is an exciting opportunity to be a part of a strategic initiative that is evolving and growing over time! In addition to applied experience, you will bring excellent problem solving, communication and teamwork skills, along with agile ways of working, strong business insight, an inclusive leadership demeanor and a continuous learning focus to all that you do. This role is based in our office in Newark, NJ. Our organization follows a hybrid work structure where employees can work remotely and from the office, as needed, based on demands of specific tasks or personal work preferences. This position is hybrid and requires your on-site presence on a reoccurring weekly basis at least 3 days per week. Here is what you can expect in a typical day: • Responsible for the hands-on design and development of production-grade GenAI and Agentic solutions comprising the portfolio developed by the Data Science Lead and the technical requirements specified. Perform hands-on context engineering, agent design, model integration, and end-to-end AI system development., • Design and build AI agent harnesses, orchestration frameworks, and context engineering pipelines; develop and integrate Model Context Protocol (MCP) servers to expose tools, data sources, and enterprise APIs to AI agents in a standardized, secure manner; and implement Agent-to-Agent (A2A) communication patterns and multi-agent architectures to solve complex, multi-step business problems., • Write production-level code and partner with machine learning engineers and platform teams to deliver AI solutions from development through production following the full AI lifecycle., • Continuously research new methods for problem solution, including new algorithms, agentic frameworks, context management techniques, and AI application patterns., • Partner with machine learning engineers to productionize AI solutions. Partner with data engineers to build data pipelines. Partner with software engineers to integrate solutions with business platforms. The Skills and expertise you bring: • Advanced degree (Masters, Ph.D.) in Mathematics, Statistics, Engineering, Econometrics, Physics, Computer Science, Actuarial, Data Science, or comparable quantitative disciplines, • Working on complex problems in which analysis of situations or data requires an in-depth evaluation of various factors. Exercises judgment within broadly defined practices and policies in selecting methods, techniques and evaluation criteria for obtaining results., • Ability to learn new skills and knowledge on an ongoing basis through self-initiative and seeking challenges, • Excellent problem solving, communication and collaboration skills Applied experience with several of the following: • AI Engineering & Production AI Lifecycle: Ability to design, build, and deliver AI systems end-to-end in a production environment. Deep understanding of the AI lifecycle — from problem framing and data preparation through model development, evaluation, deployment, monitoring, and continuous improvement. Experience with CI/CD for AI, model versioning, observability, and responsible AI practices., • Generative AI, Agentic & Context Engineering: Expertise in modern Generative AI and NLP technologies including LLMs, RAG, LangChain, LangGraph, vector databases, etc. Skilled in context engineering — prompt engineering, dynamic context construction, context window management, and structured output design. Experience building AI agent harnesses and orchestration frameworks including scaffolding, tool registries, and evaluation loops. Hands-on experience designing MCP servers to expose enterprise tools and APIs to AI agents, and implementing Agent-to-Agent (A2A) communication patterns and multi-agent architectures to solve complex, multi-step business problems., • Machine Learning: Understanding of machine learning theory, including the mathematics underlying machine learning algorithms. Expertise in the application of machine learning theory to building, training, testing, interpreting and monitoring machine learning models, • Data Acquisition and Transformation: Acquiring data from disparate data sources using API's and SQL. Transform data using SQL and Python. Visualizing data using a diverse tool set including but not limited to Python., • Database Management System: Knowledge of how databases are structured and function in order to use them efficiently. May include multiple data environments, cloud/AWS, primary and foreign key relationships, table design, database schemas, etc., • Data Wrangling: Preparing data for further analysis; Redefining and mapping raw data to generate insights; Processing of large datasets (structured, unstructured)., • AWS DevOps: Experience in the project development life cycle in an AWS environment. Familiar with development, QA, staging and production deployment stages., • Programming Languages: Python, SQL

JOB SUMMARY: The E&I QA/QC Inspector is responsible for ensuring that all electrical and instrumentation installations, materials, and testing activities comply with project specifications, applicable codes, standards, and quality requirements. This role supports construction activities through inspection, verification, documentation, and coordination with project teams to ensure safe, reliable, and compliant systems. TYPICAL RESPONSIBILITIES: Inspection & Verification • Perform inspections of electrical and instrumentation installations including:, • Cable tray, conduit, and cable pulling, • Terminations and splicing, • Grounding and bonding systems, • Instruments (pressure, temperature, flow, level devices), • Control panels, junction boxes, and marshalling cabinets, • Witness and document testing activities including:, • Insulation resistance (megger) testing, • Continuity checks, • Loop checks and functional testing, • Calibration verification of instruments, • Prepare and maintain:, • Inspection Test Plans (ITPs), • Quality checklists and inspection reports, • Non-Conformance Reports (NCRs) and punch lists, • Verify material receipt and compliance with specifications:, • Check certifications (MTRs, calibration certificates), • Ensure compliance with:, • Project specifications and client standards, • Industry codes (e.g., NEC, IEC, NFPA), • Work closely with:, • Construction teams, • Engineering and design teams, • Commissioning and startup teams, • Identify and document quality issues, • Track corrective actions and verify closure of NCRs QUALIFICATIONS: Education • High school diploma or equivalent required, • 5+ years of E&I inspection experience in industrial construction (oil & gas, petrochemical, power, or renewables), • NICET (Electrical or Instrumentation), • OSHA 10/30, • Electrical license KNOWLEDGE & SKILLS: • Strong understanding of:, • Electrical systems (low/medium voltage), • Instrumentation and control systems, • P&IDs, loop diagrams, and wiring schematics, • Familiarity with QA/QC processes, ITPs, and turnover documentation, • Ability to read and interpret technical drawings and specifications, • Strong attention to detail and documentation accuracy, • Proficient in QA/QC software and reporting tools WORK ENVIRONMENT: • Field-based role on active construction sites

Company Description Cara Cara, established in 2019, is an independently owned and operated brand based in New York, founded by three women with diverse expertise in fashion design, digital media, ecommerce, finance, and marketing. The brand is known for its vibrant colors, exquisite prints, and meticulously crafted clothing designed to inspire confidence and timeless elegance. Starting with a collection of printed cotton poplin dresses, Cara Cara has grown into a complete wardrobe offering ready-to-wear, knits, tailoring, eveningwear, and outerwear. Each piece is designed to bring beauty and ease to every occasion, reflecting the dynamic lives of its founders and their commitment to creating meaningful designs. Role Description The Assistant Technical Designer supports the Technical Design team in executing product in Production, ensuring accuracy in fit, construction, and technical documentation. This role is integral to maintaining consistent fit standards, supporting fittings, and driving efficient communication across Design, Production, and vendor partners. Reporting to the Senior Manager of Technical Design & Patternmaking, this position contributes to the overall development strategy for fit, grading, sizing, construction, and process efficiency, while upholding design intent and brand standards. What you’ll do: Support the Production teams's various functions: Technical Documentation & Data • Update all fit notes and revise specs in a timely manner after the fitting, • Measure samples, prepare garments, take detailed notes during sessions, and communicate fit comments/corrections post-fitting., • Work closely with cross-functional teams to troubleshoot and resolve design and fit issues to ensure feasibility, • Clearly communicate technical updates and construction details to overseas factories using diagrams, photos, and written instructions., • Support standardized fit practices and internal process enhancements for better efficiency. What You’ll Bring • 1–3 years of experience in Technical Design or related field (internship included), • Strong understanding of women’s RTW garment construction for wovens and cut & sew knits, • Proficiency in Excel, PLM systems, and Adobe (Illustrator and Photoshop), • Strong organizational skills, attention to detail, and ability to manage multiple priorities, • Effective communication skills and ability to collaborate cross-functionally, • Self-motivated, proactive, and comfortable working in a fast-paced environment, • Curiosity and willingness to learn and grow, • Interest in Production-focused roles Preferred Skills • Experience with Gerber or similar patternmaking software, • Exposure to 3D pattern making tools (e.g., Browzwear), • Basic knowledge of grading and fit standards What we offer • Comprehensive Medical, Dental & Vision, • A PTO policy that includes including vacation, sick and parental leaves, • 401K (employee funded), • Pre-tax FSA and Commuter Benefits plans, • 15+ Vacation days Work Authorization Cara Cara does not provide employment sponsorship. Candidates must be currently authorized to work in the United States on a full-time basis. Salary: $60K-$80K Cara Cara is an equal opportunity employer committed to fostering an inclusive, innovative environment. We are committed to equal employment opportunities regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or veteran status. If you have a disability or special need that requires accommodation, please contact us at *

Ettinger Engineering Associates (EEA), a leader in sustainable MEP/FP and civil engineering design, is seeking a mid- to senior-level Passive House Specialist to lead and deliver high-performance building projects across our growing portfolio. This role goes beyond modeling – you’ll lead projects from early design through construction, driving performance, coordinating teams, and ensuring what gets built meets Passive House certification and energy targets. Salary: $75,000.00 - $130,000.00 per year Key Responsibilities • Manage large-scale multifamily high-performance and Passive House projects from design through construction., • Lead Passive House (PHI/PHIUS) certification efforts, including documentation, modeling, and QA/QC., • Advise project teams on Passive House and sustainability strategies, including building systems, enclosure assemblies, materials, constructability, and site improvements., • Recommend energy efficiency and resiliency strategies supported by engineering analysis, building science, and simulation tools., • Perform and/or oversee energy modeling (PHPP, WUFI Passive, THERM, Flixo, or equivalent) to evaluate and validate design decisions., • Track and manage multiple projects simultaneously, coordinating with internal staff and external design and construction teams to maintain schedule and performance targets., • Conduct architectural and engineering design reviews and provide clear, actionable feedback to project teams., • Review drawings, specifications, and construction submittals for compliance with Passive House, energy codes, and program requirements., • Advise on certification pathways and requirements, including Passive House, ENERGY STAR, Enterprise Green Communities, and LEED., • Perform construction-phase services including site inspections, field verification, and performance testing oversight., • Maintain working knowledge of evolving technologies, materials, and best practices in high-performance building design., • Stay current with ASHRAE standards, NYC/NYS energy codes, and incentive programs (e.g., NYSERDA, HPD, HCR)., • Prepare and manage documentation for program compliance and coordinate with certifiers and program administrators., • Contribute to improving internal tools, workflows, and deliverables through proactive problem-solving and process refinement. Minimum Qualifications • Bachelor’s or Master’s degree in architecture, engineering, building science, or a related field., • PHIUS CPHC or PHI Certified Passive House Designer required., • 5+ years of experience in high-performance building design and project management., • Proven experience delivering Passive House or equivalent high-performance projects through construction., • Strong understanding of building enclosure systems, air barriers, thermal bridging, and mechanical systems integration., • Ability to manage multiple projects and communicate effectively with diverse teams., • Experience with PHPP, WUFI Passive, THERM, or similar tools. Preferred Qualifications – Field Testing and Verification • Hands-on experience with blower door testing (whole-building and compartmentalization)., • Experience with enclosure air leakage testing and ASTM and Passive House protocols., • Familiarity with duct leakage testing and airflow verification., • Experience conducting or interpreting infrared thermography (IR scanning)., • Knowledge of ventilation commissioning and balancing (ERV/HRV systems)., • Experience performing construction inspections to verify air barrier continuity, insulation quality, and system installation., • Ability to diagnose and resolve field performance issues to meet certification targets.

Job Overview The Project Manager is responsible for the overall planning, coordination, and financial management of assigned construction projects from preconstruction through closeout. This role serves as the primary point of accountability for project performance, ensuring projects are delivered safely, on schedule, within budget, and in accordance with contract documents and company standards. The Project Manager leads the project team in collaboration with the Field Superintendent and oversees all administrative, financial, and contractual aspects of the project. Success in this role requires strong leadership, organization, financial acumen, and proactive problem-solving. Core Accountabilities • Project Planning & Financial Management, • Schedule Oversight & Risk Mitigation, • Contract Administration & Documentation, • Subcontractor & Vendor Management, • Client Communication & Relationship Management, • Lead projects from preconstruction through closeout, establishing clear scopes, budgets, schedules, and execution plans., • Collaborate with preconstruction, estimating, and field teams to ensure smooth project handoff., • Develop and maintain project budgets, cost forecasts, and cash flow projections., • Communicate with building landlord groups and other owner’s representatives when one is existing on a project, • Coordinate and work with architects, engineers, expeditors and all design consultants on any given project. Financial & Cost Control • Manage all project financials, including buyout, change management, cost tracking, and forecasting., • Review subcontractor pricing and negotiate change orders on projects, negotiate contracts, and issue purchase orders and subcontracts., • Track and manage change orders, ensuring timely pricing, approval, and documentation., • Protect project margins through disciplined cost control and early issue identification., • Review field progress with superintendents to track general condition spend and overall project timelines. Schedule & Risk Management • Develop and monitor project schedules in collaboration with the Field Superintendent., • Identify schedule risks, scope gaps, and constructability issues early and implement corrective actions., • Proactively manage risk related to cost, schedule, quality, and client expectations., • Proactively review lead times from subs and ensure submittals are being submitted early. Contract Administration & Documentation • Administer prime contracts and subcontracts in accordance with contractual requirements., • Manage RFIs, submittals, meeting minutes, and project correspondence., • Ensure all project documentation is complete, accurate, and timely., • Hold weekly calls with client, architect, and building management to review project progress and outstanding items needing attention. Subcontractor & Team Management • Lead subcontractor procurement, coordination, and performance management., • Hold subcontractors accountable to the contract scope, schedule, quality, and safety requirements., • Partner closely with Field Superintendents to ensure alignment between office and field execution. Client & Stakeholder Communication • Serve as the primary point of contact for clients, consultants, and stakeholders., • Lead project meetings and provide clear, consistent project updates., • Manage client expectations and resolve issues professionally and proactively. Closeout & Project Completion • Oversee project closeout activities, including punch lists, inspections, turnover documentation, and final billing., • Ensure projects are closed out efficiently and in compliance with contract requirements., • Capture lessons learned to improve future project execution. Leadership Expectations • Act as an owner’s representative for every assigned project., • Maintain a high level of accountability, organization, and attention to detail., • Communicate clearly, proactively, and professionally with all stakeholders., • Promote a culture of planning, foresight, and disciplined execution., • Support and reinforce company standards, systems, and values.

We are seeking a Project Manager to lead the planning, coordination, and execution of a mix of architectural and LV electrical-related scopes on a large, complex design-build correctional project. The role is centered on project management and team coordination — facilitating dialogue between multiple parties, coordinating scope interfaces, and troubleshooting issues before they impact cost, schedule, or quality. The Project Manager will act as a central point of coordination between key trade contractors, the electrical contractor, the design team and their consultants, and the broader project team. Technical exposure to electrical and low-voltage systems is helpful but not required; success in this role comes from strong fundamentals in coordination, communication, and leadership. Responsibilities · Manage assigned trade scopes from design development through construction and closeout · Lead coordination efforts between trades, consultants, and the project team · Participate in and help drive the design-build process, including design reviews and design-assist efforts · Identify scope gaps, constructability concerns, and interface conflicts early · Participate in BIM coordination meetings and work with VDC teams and trade partners to resolve clashes and installation conflicts · Coordinate specialty architectural scopes such as partitions, enclosures, access panels, ceilings, and detention furnishings · Coordinate furnished security system components (access control, intercom/paging, video surveillance, and related systems) with the electrical contractor to ensure proper installation and integration · Facilitate meetings, document decisions, and track issues to resolution Required Qualifications · Minimum 7 years of relevant construction experience · Bachelor’s degree in Architecture or Engineering (or closely related construction discipline) · At least one completed project of $50M+ construction value or ~100,000 SF or greater · Strong coordination, organization, and problem-solving skills · Ability to read architectural and electrical drawings, including basic low-voltage/security drawings and riser diagrams · Experience working directly with subcontractors and consultants Preferred Qualifications · Design-build experience · Exposure to BIM/VDC coordination processes · Experience coordinating MEPS or low-voltage systems · Experience with highly coordinated institutional projects Candidates do not need to be electricians or modelers, but must be comfortable working with technical trade partners and driving coordination to resolution. Ideal Candidate · Proactive and organized · Able to lead meetings and drive decisions · Comfortable pushing for scope clarity and accountability · Not intimidated by technical trades or complex scopes · Willing to learn and become fluent in assigned systems

We are seeking a motivated and experienced designer to join our team. In this role, you will be responsible for supporting the design team. This position requires a highly motivated and creative individual with a passion for textiles, and soft home products. Responsibilities: • Conduct trend research across home décor, lifestyle, and fashion industries to inform seasonal design concepts., • Perform regular competitive shopping (in-store and online) to identify emerging trends, market gaps, materials, and packaging concepts., • Translate research insights into compelling, brand-right assortments., • Leverage AI tools to generate design concepts, mood boards, color palettes, planograms, packaging designs and pattern variations., • Create original print and pattern designs that align with brand vision and market trends., • Demonstrate high proficiency in soft home categories such as bedding, window and bath accessories., • Develop detailed CAD drawings, technical specs, and design presentations for internal reviews and vendor communication., • Collaborate with the sales & PD team daily as well as other cross-functional teams to ensure cohesive, trend-right seasonal assortments., • Maintain strong awareness of color, material, and construction innovations in the home décor market., • Participate in showroom set-up and visual merchandising planning to ensure alignment with seasonal design vision., • Stay up-to-date on design software, AI tools, and industry best practices to continuously improve processes and output quality. Qualifications: • Bachelor’s degree in Fashion Design, Industrial Design, or a related field (or equivalent professional experience)., • Proven experience creating CADs for soft home categories, preferably for home décor products., • Strong portfolio showcasing design skills, including print, pattern, and product concepts., • High proficiency in Illustrator, Photoshop, and AI tools to enhance design workflows., • Up-to-date knowledge of trends with a keen eye for color, pattern, material, and detail., • Ability to excel in a fast-paced, deadline-driven environment with strong attention to detail., • 8–10 years of experience in home fashion or home décor design preferred.

Who You Are: We’re looking for a motivated Women’s Footwear Designer to support the Outlet/Cutup design team. This role will support the Design Director, Senior Designer, and Technical Designer through the full development cycle. What You’ll Do: • Research and analyze seasonal fashion trends, including materials from the latest runways and the competitive commercial market, • Create shoe sketches based on concept direction, CADs, and technical specs for off-price channels (Outlet and Cutup), • Present design ideas and sketches to internal teams, • Assist in material and color selection during detailing, • Support fit corrections, proto prepping/presentation boards, layer-up treatment specs, and graphic placement, • Participate in costing, CAD reviews, sketch reviews, and market meetings; take notes and communicate across cross-functional teams as needed, • Communicate daily developments with factories, • Assist in developing prototypes through to final, pre-production refined samples, • Collaborate closely with product development, merchandising, and materials teams to ensure cost-effective and efficient design execution, • Create and maintain legal decks and follow up as needed, • Organize design archives, material library, and footwear proto samples, • Provide administrative support for design meetings (e.g., tracking proto shipments, preparing presentation boards, etc.) You’ll Need to Have: • 1+ years’ design experience within the women’s footwear industry, • Bachelor’s degree in footwear design or related field preferred, • Strong sketching skills; hand sketching preferred, • Proficiency in Adobe Illustration and CAD, • Experience in creating footwear specifications, • Basic knowledge of footwear construction and materials (especially synthetic and fabric types preferred), • Strong sense of color, fashion trends, and materials, • Ability to prioritize tasks across multiple deadlines, meet work milestones, and follow through with strong time-management skills, • Self-motivated, proactive, organized and team player, • Working knowledge of PLM is preferred but not required, • Graphic manipulation experience is preferred but not required MK Perks: • Generous Paid Time Off & Holiday Calendar, • Summer Fridays, • Internal Mobility Across Brands, • Cross-brand Discount, • Exclusive Employee Sales, • Fav 5 Cards (MK Discount for friends and family), • 401k Match, • Paid Parental Leave, • Thrive Wellness Program, • Commuter Benefits, • Gym Discounts The Company is an equal employment opportunity employer. The Company’s policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. At Capri Holdings Limited, we are committed to providing a fair and accessible recruitment process. If you require a reasonable accommodation for the interview or application process, please contact our Talent Acquisition team at . In compliance with certain Pay Transparency laws, employers are required to disclose a salary range. The salary for this position will vary based on role requirements, skill set and years of experience. About Us: Michael Kors is a world-renowned, award-winning designer of luxury accessories and ready-to-wear. His namesake company, established in 1981, currently produces a range of products under Michael Kors Collection, Michael Kors, and Michael Kors Mens, including accessories, ready-to-wear, footwear, watches, jewelry, and a full line of fragrance products. Michael Kors stores are operated in the most prestigious cities in the world, including New York, Los Angeles, Chicago, London, Milan, Paris, Dubai, Seoul, Tokyo, Hong Kong, Shanghai, and Rio de Janeiro. In addition, Michael Kors operates digital flagships across North America, Europe, and Asia, offering customers a seamless omnichannel experience. At the center of it all is a designer who has created an enduring and iconic luxury lifestyle brand with a distinctive point of view and global reach. Michael Kors has a sharp focus on providing his customers with accessories and clothes that are consistently polished, chic, relaxed, and glamorous. Kors has also been the recipient of numerous industry awards and accolades within the fashion industry. The fashion designer also focuses on giving back. For more than 35 years he has been a passionate supporter of God’s Love We Deliver, a New York-based non-profit organization that cooks and delivers nutritious meals to people living with serious illnesses in and around New York City. In 2013, in a move to broaden his philanthropic efforts, Michael Kors launched “Watch Hunger Stop,” partnering with the United Nations World Food Programme (WFP) to help fight world hunger. Proceeds from annual special-edition products and other targeted initiatives help provide food to children through WFP’s school meals program. To date, Michael Kors has helped WFP deliver over 35 million meals (and counting) to hungry children.

AutoCAD Drafter Full time (40 hours/week) Location: Lynbrook, NY Job Responsibilities: • Create and modify detailed design drafts using AutoCAD, applying standardized methods for diverse construction environments., • Perform design calculations using established procedures., • Apply knowledge of construction equipment, field operations, and design codes to develop construction operation plans., • Accurately interpret project documents, drawings, and field notes., • Review shop drawings and product submittals for compliance with engineering documents., • Manage time and workload to meet project deadlines, collaborating closely with project leaders., • Potentially interact with clients or their representatives alongside the project manager to define project requirements., • Conduct field tasks, including precise measurements and site condition assessments., • Perform other duties as assigned by senior staff. Requirements: • Up to 5 years experience, • Strong proficiency in AutoCAD is essential, • Associates or Bachelor’s Degree in architecture, Engineering, or a related STEM field is preferred., • Experience with site visits and field measurements is highly desirable, • Ability to accurately translate field measurements into detailed drawings, • Understanding of construction field operations is an advantage., • Proficiency with Word, Excel, and Bluebeam., • Strong communication skills, both written and verbal, for effective collaboration with colleagues and clients., • Ability to manage multiple tasks and prioritize effectively., • Ability to work independently and collaboratively, • Willingness to perform occasional site visits and fieldwork., • Willingness to work full-time in our Lynbrook, NY office. Salary Range: $62,000- $72,000 • Competitive salary with overtime opportunities, • Performance-based bonuses and company profit sharing, • Paid vacation and personal time off, • Company paid medical insurance, • Company-sponsored 401-(k)plan, • Convenient office location in Lynbrook, NY. Within walking distance of the LIRR. About the company: Lawrence K. Shapiro & Associates, P.C. (LKS) is a growing consulting engineering firm providing specialized expertise to the construction and heavy-lifting industries. Founded by Lawrence K. Shapiro, who brings more than 46 years of experience in the field, the firm delivers engineering solutions for crane and derrick operations, demolition engineering, construction means and methods, and complex lifting challenges. Building on decades of work on major projects in New York City and around the world—including landmark developments and critical infrastructure—Lawrence K. Shapiro & Associates, P.C. combines deep technical knowledge with practical, field-driven insight to support safe, efficient, and innovative construction projects nationwide.

Who You Are: You are a proactive and collaborative construction professional with 3 to 6 years of experience in retail construction or store development. You communicate clearly, adapt quickly to change, and are eager to take ownership of projects while learning from senior leaders. You thrive in a fast-paced environment and are motivated to deliver high-quality results as part of a dynamic team. What You’ll Do: • Oversee all phases of retail and outlet store construction projects, from schematic design through final completion, ensuring cost-effective and timely delivery., • Review construction drawings and collaborate with internal teams, external partners, and vendors to ensure alignment with company standards and project goals., • Evaluate landlord criteria and lease construction requirements, communicating key details to stakeholders., • Prepare and manage project schedules and construction estimates based on design development drawings., • Coordinate preconstruction activities, including permits, utility setup, and project communications., • Support the bid process: review proposals, assist with negotiations, and ensure all bids meet budget and quality expectations., • Track project costs, review and approve invoices, and maintain accurate project accounting records., • Work closely with Retail Operations and IT to ensure all operational needs (registers, security, etc.) are addressed before store turnover., • Manage construction progress, monitor quality, and ensure timely completion of punchlists and turnover activities., • Build and maintain strong relationships with contractors, consultants, designers, and internal teams., • Ensure owner-furnished materials are ordered and delivered according to schedule., • Maintain organized project files (digital and hardcopy) and ensure all financial closeout documents are complete., • Contribute to a positive team culture and support the development of junior team members as appropriate. You’ll Need to Have: • Bachelor’s degree in Architecture, Construction Management, Engineering, or a related field., • 3–6 years of experience in retail construction, store planning, or a similar environment., • Experience supporting or managing multiple projects with aggressive timelines., • Familiarity with real estate expansion programs is a plus. We’d Love to See: • Strong communication and organizational skills., • Ability to provide value engineering input during design phases., • Proficiency with Microsoft Office, AutoCAD, and project management software (e.g., Procore)., • Initiative and ability to work independently while collaborating with cross-functional teams., • Willingness to travel as needed. Capri Perks: • Generous Paid Time Off & Holiday Calendar, • Summer Fridays, • Internal Mobility Across Brands, • Cross-brand Discount, • Exclusive Employee Sales, • Fav 5 Cards (MK Discount for friends and family), • 401k Match, • Paid Parental Leave, • Thrive Wellness Program, • Commuter Benefits, • Gym Discounts The Company is an equal employment opportunity employer. The Company’s policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, military status, disability, genetic information or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. At Capri Holdings Limited, we are committed to providing a fair and accessible recruitment process. If you require a reasonable accommodation for the interview or application process, please contact our Talent Acquisition team at . In compliance with certain Pay Transparency laws, employers are required to disclose a salary range. The salary for this position will vary based on role requirements, skill set and years of experience.

Assistant Project Manager | Best-in-Class Builder | High-Profile NYC Projects A successful General Contractor with a focus on large-scale multi-family construction projects is looking for an Assistant Project Manager to join their dynamic team of professionals. In this role, the APM will work with the construction and accounting teams to manage several projects throughout Manhattan. Candidates should possess at least 3 years in construction management with experience in large ground up and/or renovation projects. Responsibilities: • Assist in managing design, development and construction documents, • Coordinate with Project Manager and site superintendent, • Manage the permitting process from initial approvals to final Certificate of Occupancy, • Assist in coordination of consultants, meetings and drawings, • Perform take-offs, leveling construction bids and manage award process, • Develop project budgets and project schedule tasks and deadlines., • Interface with other members of team to ensure accuracy with outlining scope, goals, deliverables, required resources, budget, and timing., • Maintain daily logs. Track and report on project milestones and provide reports to management., • Maintain project tracking spreadsheet., • Ensure all project documents are stored and tracked on a timely basis., • Attend meetings and produce meeting minutes. Requirements: • Must have experience with Procore, • 3+ years of project management experience, • Experience with Yardi, MRI, QuickBooks, Excel and Bluebeam are a plus., • Must be able to read construction and shop drawings, • Construction administration experience is a must., • Must be able to work in a fast paced/entrepreneurial environment, • Strong written and oral communication skills Salary: $90,000 - $110,000 The above salary range represents Advice's good faith and reasonable estimate of the possible base compensation range at the time of posting and is not reflective of the total compensation package, which may also include benefits, equity and other non-cash incentives. Please send your resume for immediate consideration to: If this role isn't the ideal fit, please feel free to forward your resume to the email above to explore other available opportunities. Please also feel free to share this posting with anyone in your network who might be open to learning more. Referrals are always appreciated! Advice Personnel

Summary: The Construction Inspection Manager is a leadership role responsible for overseeing civil and infrastructure construction projects and managing a team of construction inspectors and contract administrators. The position involves coordinating the transition from design to construction, supervising field inspections, and ensuring quality control throughout project execution and close-out. This role also requires collaboration with engineering teams, clients, and administrative staff while managing schedules, staffing, and construction operations. The manager will mentor inspection staff, enforce company policies, and support training and professional development within the team. Job Requirements: • Manage construction inspection operations, staff assignments, and project scheduling for civil and infrastructure projects., • Oversee construction phase activities including payment certifications, field changes, and coordination with design teams and clients., • 15+ years of experience in civil or infrastructure construction inspection and project management., • Strong leadership, communication, and organizational skills with proficiency in inspection software and Microsoft Office., • Relevant certifications preferred such as OSHA 10/30, NICET (I–III), ACI Field Technician, NJDOT Traffic Control Coordinator, and Work Zone Safety training.

Work for a high-growth infrastructure business focused on developing, building, and delivering hyperscale data center campuses that support the explosive demand from AI and cloud computing. Responsibilities • Lead full lifecycle development of large-scale power and AI data center assets from site origination through permitting, design, interconnection, financing, and transition into construction execution., • Drive regional growth strategy and market expansion across the Eastern U.S., aligning development activity with long-term pipeline and investment priorities., • Originate and structure multi-gigawatt power and data center opportunities, including collaboration with landowners, utilities, and development partners., • Negotiate and oversee key project agreements including land control arrangements, PPAs, utility supply agreements, incentives, water and fiber commitments, and procurement contracts., • Manage project financial models, budgets, and schedules while overseeing cross-functional teams and external advisors to ensure delivery to critical milestones. Requirements • Extensive experience in large-scale infrastructure or data center development, with a proven ability to originate and progress projects through to notice to proceed., • Strong understanding of land acquisition, real estate structuring, permitting processes, and entitlement pathways for complex energy or data center projects., • Familiarity with grid interconnection processes, utility engagement, and critical infrastructure requirements including power, water, and fiber., • Proven capability in managing multi-disciplinary project teams, budgets, schedules, and stakeholder relationships across multiple concurrent developments., • Must have a background in natural gas development Travel - up to 25% / Salary - up to $250,000 Benefits include, but are not limited to, • 100% Company-Paid Medical, Dental & Vision (for employees and dependents), • 401(k) with Company Match, • Generous Paid Time Off + 11 Paid Holidays, • 12 Weeks Paid Parental Leave, • Life, AD&D & Long-Term Disability Coverage, • Flexible Spending Accounts (FSA) for Medical, Dependent Care, Transit & Parking (with company contributions)

Hays is working with a world class family owned civil general contractor who is hiring for a Mechanical Estimator. They work on projects in the following sectors; civil infrastructure, oil & gas, mechanical, and industrial. On top of the leading salary and excellent benefits, this company cares about it's community and their team. They are offering over range of $100,000 - $130,000 salary with 90% medical premiums covered with excellent health/vision/dental plans, 401k, bonus, and career growth opportunities. Below are the responsibilities and qualifications of the role. Core Responsibilities: • Create bid invites and send out to chosen subcontractor lists., • Follow-up with subs and vendors, including by phone., • Review plans, specifications RFI’s, schedules, and other documents to understand a project’s requirements., • Document management., • Perform takeoffs using OST (onscreen takeoff)., • Populate estimate in Quotesoft and HeavyBid., • Create scope sheets for vendors and subs., • Review scopes in meetings with subcontractors, design teams, and clients., • Evaluate pricing and scope to produce a complete scope and purchase., • Complete Estimate Files for pricing lump sum work., • Extrapolate QTO and pricing for simple schematic or conceptual pricing., • Coordinate meetings during the estimating process., • Gain additional experience with mechanical trades and / or Subject Matter Expert (SME) trades. Qualifications: • Bachelors Degree in either mechanical engineering, construction management, architecture or an equivalent combinations of technical training and/or equivalent experience, • Demonstrate knowledge of the regional construction market and a keen understanding of costs and pricing, • Ability to work successfully in a team environment, • Must be detail-oriented, organized, flexible, and able to effectively multitask while working in a fast-paced environment, • Must have excellent time management and prioritization skills, • If the employee does not currently have OSHA 10 safety training, they will be required to acquire it., • English Fluency, • Excel fluency

Role: Project Manager – Wellness & Construction Projects Reports to: Director, Project Management Location: New York, NY / Miami, FL Salary range: $100k-$110k About us Prestige Wellness Group is a leader in luxury wellness solutions, designing and delivering award-winning thermal and spa environments for high-end residential and five-star commercial spaces. Headquartered in NYC, we’re growing quickly and looking for a detail and client-driven PM to grow with us. About the Role We are looking for an experienced Project Manager to join our team and oversee projects from the moment they are sold through final delivery. The ideal candidate will be responsible for coordinating all phases of project execution, ensuring that projects are delivered on time, within budget, and according to the highest standards of quality and safety. This role requires strong organizational skills, excellent communication abilities and capacity to manage multiple stakeholders across departments and on-site teams. What You’ll Do • Manage projects from post-sale handoff through final delivery and project completion, • Coordinate and lead meetings with clients to ensure alignment on project requirements and progress, • Work closely with drafting teams to manage drawings and technical documentation, • Develop and maintain detailed project schedules, • Prepare and manage material lists required for project execution, • Coordinate with Operations and Purchasing to procure required materials, • Coordinate with the Logistics department to schedule deliveries to job sites, • Collaborate with the technical department to resolve design or engineering questions, • Oversee project execution and monitor progress to ensure alignment with schedule and scope, • Anticipate potential scheduling issues and proactively resolve conflicts, • Ensure field teams and foremen comply with safety standards and quality execution guidelines, • Monitor project costs and support efforts to keep projects within budget, • Collaborate with the Accounting team to manage project billing milestones and coordinate vendor payment schedules What We’re Looking For Required: • Bachelor's degree in Architecture, Engineering or relevant field, • Minimum 6 years of Project Management experience, • Strong working proficiency of Revit and CAD, • Experience coordinating schedules, materials, and project logistics, • Exceptional organizational and planning skills, • Strong communication and presentation abilities, • Ability to manage multiple stakeholders and work effectively across departments, • Ability to anticipate problems and proactively develop solutions Preferred: • Experience working in construction, architecture, engineering, or specialty contracting environments Why Join Prestige Wellness Group • Work on high-profile luxury residential and hospitality projects, • Be part of a fast-growing, design-driven company, • Collaborate with a passionate, high-performance team, • Real opportunities for professional growth and advancement