Trabajos electrical controls engineer en Piscataway, New JerseyCrear alertas

Job Summary The Industrial Controls Engineer designs /programs, and supports PLC-based automation systems for industrial processes. Responsibilities include control panel design,system integration, troubleshooting electrical and control systems, and supporting equipment installation and startup. Job Duties / Responsibilities • Design, fabricate, and install PLC based process control panels, • Troubleshoot and upgrade existing control panels, • Maintain inventory of all PLC/HMI rack systems and programs, • Install and support low voltage three-phase electrical systems, • Develop and maintain electrical schematic sand wiring diagrams, • Be able to troubleshoot low voltage electrical control systems, • Specify wiring and motor controls for low voltage systems, • Install power distribution and protection systems, • Design and configure HMI interfaces, • Install and calibrate temperature controllers and transmitters, • Pressure Transmitters, • 4-20ma Loop Controllers, • Burner Controllers and Actuators, • Industrial pH Meters, • Level Transmitters, • Flow Meters, • Variable Frequency Drives Work Conditions • Physically available to lift up to 50lb, • Manual dexterity and the ability to remain standing, crouching, and bending for long periods of time, • Overtime as needed Job Requirements • AS, BSEE, BSEET, or technical degree, • 3-5 years of industry experience, • Review projects including quotes, job specifications, and resolve any quote to job specifications differences, • System Architecture including non-standard material and control panel power requirements/distribution, • Review specifications and standard practices – inclusive of the internal hardwired and logic standards, general specifications and scope of work, • Design and installation of push-button station controls, • Material responsibility includes advance material order, specifying Panel material, writing panel material EBMs. Use AutoCAD electrical for large panels, • Assisting with installation • Debugging with no additional support • Launch and Standby, • As Builts Technology Requirements • RSLogix 500, Connected Components and Productivity Suite, 5000, • RS Networx for DeviceNet, ControlNet, EtherNet IP, • DriveExecutive, DriveExplorer, • PanelBuilder PDS,1400e, 32 (legacy items), • FactoryTalk View, • C-More Programming software (in house builds), • RSView Studio, • Troubleshoot and tune PID control loops, • Calibrating Process Control Equipment, • Microsoft Office Suite Benefits • Competitive Compensation • 401(k) • 401(k) Matching, • Medical, Dental,and Vision Benefits, • Paid Time Off and Paid Holidays Classification Full Time Position

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility Are you a seasoned engineering professional with a passion for automation and innovation? As a Senior Controls Engineer at BEUMER Group, you will lead the design, development, and implementation of advanced control systems for high-speed sortation and conveyors-based material handling solutions. This strategic and hands-on role requires deep technical expertise, leadership capabilities, and a collaborative mindset to drive excellence in fulfilment automation. Responsibilities • Lead the design and programming of machine controls for BEUMER high-speed sortation systems., • Architect scalable and modular PLC and HMI solutions tailored to customer specifications., • Oversee hardware selection, I/O mapping, and control logic development across multiple platforms., • Collaborate cross-functionally with electrical, mechanical, and software engineering teams., • Mentor junior engineers and provide technical leadership throughout project lifecycles., • Conduct system emulation and validation testing to ensure performance and reliability., • Manage on-site commissioning and troubleshoot complex system behaviors., • Develop and maintain comprehensive documentation, standards, and training materials., • Drive continuous improvement initiatives and contribute to R&D efforts. Requirements/Skills and Abilities: Education & Experience: • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, or related field., • 10+ years of experience in controls engineering, preferably in the material handling or automation industry., • Advanced proficiency in programming Allen-Bradley and/or Siemens PLCs., • Expertise in SCADA systems, especially Ignition platform development and integration., • Strong understanding of industrial communication protocols and industrial networks (Ethernet/IP, Profibus, ProfiNet etc.), • Experience with safety systems, motion control, and robotic integration is a plus., • Excellent communication and leadership skills., • Strong analytical and problem-solving abilities., • Ability to manage multiple priorities and mentor team members., • Willingness to travel nationally and internationally up to 30% for project execution. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Senior Controls Engineer – Machine Control & SCADA Somerset, NJ| Full-Time Are you a hands-on controls engineer who loves making high-speed machines run smarter, faster, and more reliably? We’re looking for a Senior Controls Engineer to own development and support of machine control systems for high-speed sorters, with additional work in packaging, palletizing/robotics, and material handling systems. What You’ll Do • Design, program, and maintain PLC-based machine control systems (high-speed sortation + packaging/palletizing)., • Lead development and enhancement of core control technologies, including documentation and training., • Program and commission Allen-Bradley and Siemens PLCs; prepare, test, and troubleshoot PLC hardware., • Develop and integrate SCADA systems, especially using Ignition by Inductive Automation., • Turn customer requirements and electrical drawings into robust control logic and system architectures., • Collaborate with R&D, engineering, PM, sales, and customer service teams globally., • Bachelor’s or Master’s in Controls Engineering or related field (or equivalent experience)., • 10+ years of relevant experience in machine control / industrial automation., • Deep expertise in Allen-Bradley and Siemens PLCs; experience with other PLCs is a plus., • Strong background in advanced control concepts and applied math for controls., • Proven experience with SCADA development, ideally Ignition (design, implementation, maintenance)., • Able to independently tackle complex controls challenges and own solutions from concept through commissioning., • Willingness to travel up to ~40% nationally and internationally. Company DescriptionWe care about the success of each member of out team! We strive for long lasting partnerships where you can grow and expand your career.We care about the success of each member of out team! We strive for long lasting partnerships where you can grow and expand your career.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills Pay: $110,000 – $130,000 per year Benefits: • 401(k), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • FSA, • HSA, • Paid Time Off, • Paid Holidays, • Profit Share, • Disability Insurance, • Life Insurance, • 8-hour shift EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Systems Engineer, based in Somerset, NJ, is a multifaceted role requiring an in-depth understanding of BEUMER sortation products and applications. This position is responsible for analyzing customer requirements, developing innovative solutions, estimating costs, overseeing the development of layouts using 2D and 3D CAD and delivering customer proposals. Additionally, the Systems Engineer acting in the capacity of subject matter expert, collaborates with Sales, Engineering, and Software/Controls to ensure the successful design of solutions that address customer requirements. The Systems Engineer is also responsible for participating in and leading client meetings, calls and workshops serving in the capacity of a technical expert. Key Responsibilities: Subject Matter Expertise: • Become an expert in BEUMER's Logistics products, solutions and applications., • Lead and engage in initiatives that require expertise to address customer requirements through innovative solutions., • Understand customer requirements and business objectives and recommend appropriate products and solutions to meet their needs., • Analyze customer requirements to identify system design needs., • Develop innovative solutions using 2D and 3D CAD., • Collaborate with Sales, Engineering, and Software/Controls departments to design and develop effective system solutions., • Serve as the primary point of contact (acting as a subject matter expert) for customers, providing pre-sales and post-sales consulting on technical topics., • Develop and estimate cost associated with system design and solutions., • Coordinate in developing RFPs and manage vendor responses to RFPs., • Develop tools and assist in processes development as needed., • Participate, lead and coordinate client meetings, workshops and calls as necessary., • Coordinate with Sales, Systems Engineering, Operations and Finance to handover orders. Key Requirements and Professional Attributes: • Bachelor's degree in Industrial, Mechanical, or Electrical Engineering, • 4-6 years of experience in systems engineering, technical sales or product engineering; preferably in convey and sortation solutions., • High motivation, drive and initiative to get things done with little to no supervision., • Team player and ability to work well with large team setups including internation cultures., • Strong time management, organization and attention to detail., • Excellent written and verbal communication skills., • High computer literacy in MS Office Suite., • Proficiency in 2D and 3D modeling with preferred experience in AutoCAD and SolidEdge., • Strong mathematical, analytical, and problem-solving skills, • Active listening for customer satisfaction and technical insight, • Preferred experience automated systems, and MS Excel/VBA programming, • Ability to set and meet goals, care for others, and work collaboratively in a team., • Ability to travel as per business needs. Estimated travel is 15-20% on average. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees: • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!

Job DescriptionWoodard & Curran is a national engineering, science, and operations firm with a simple vision for clean water, a safe environment, healthy communities, and happy people. As an employee-owned company, we strive to cultivate teams that encourage collaboration in an inclusive culture. We seek talented individuals from all backgrounds to help us address a broad range of water and environmental issues. We prioritize our people, offering opportunities for professional growth, ownership, and flexibility. This commitment enables us to make a meaningful impact on our clients, communities, and the planet. We are seeking a service-oriented SCADA Services Engineer with strong problem-solving abilities, excellent customer-facing skills, and proven hands-on experience supporting, maintaining, troubleshooting, and upgrading Supervisory Control and Data Acquisition (SCADA) systems and their underlying PLCs and control panels. In this role you will be the go-to technical expert for a diverse installed base of SCADA systems including Inductive Automation (Ignition), Rockwell Automation (FactoryTalk), Wonderware, iFix, VTSCADA and Allen-Bradley PLC platforms. Day-to-day responsibilities include remote and on-site troubleshooting, break/fix support, system optimization, patch management, and implementing upgrades and enhancements on existing systems across projects of varying size and complexity. This is a customer-facing, service-focused position that requires a proactive mindset: anticipating issues before they escalate, resolving problems efficiently, and maximizing system uptime and performance while making the best use of available resources. You will regularly interact with end-users, plant operators, and internal teams to diagnose issues, explain technical concepts clearly, and deliver sustainable solutions. Who are we looking for: The successful candidate will join a strong team of motivated professionals who provide ongoing support and lifecycle services for municipal and industrial water and wastewater clients. You will be the primary technical resource for service contracts, maintenance agreements, and post-implementation support of medium to large SCADA installations (both standalone and multidisciplinary systems). Strong communication skills are essential, as you will interface daily with operators, plant managers, IT/OT teams, and other stakeholders. Ideal candidates are eager to deepen their expertise in supported platforms and expand into related areas such as industrial networking and OT cybersecurity. Offering Flexible Remote/Hybrid Work/Onsite Schedule: Hybrid work schedule (consisting of office, remote, and onsite, pending project needs) Travel & Physical Requirements: This position involves regular travel to client facilities (typically within driving distance) for on-site troubleshooting, preventive maintenance, system upgrades, emergency response, and scheduled service visits. Regional travel up to 50–70% (mostly day trips), with occasional overnight stays required depending on call-out needs and multi-day service work. • Must be physically able to lift and carry 40 lbs repeatedly - Comfortable working from heights (ladders, scissor lifts, platforms) and in confined spaces - Able to safely work on live control panels while wearing proper arc flash PPE and following NFPA 70E protocols - Candidate must maintain a valid driver’s license with no major infractions - Candidate must maintain a valid REAL ID driver’s license or other TSA-approved identificationWhat you will be doing at Woodard & Curran: • Rapidly diagnose and resolve SCADA, HMI, historian, PLC, network, and process-control-related issues in live production environments at municipal and industrial water/wastewater facilities, • Perform on-site and remote troubleshooting of SCADA communications, control system faults, instrumentation, and automation problems, • Maintain, repair, and support existing Control Panels, PLCs (primarily Allen-Bradley), SCADA servers, workstations, and associated infrastructure, • Support and execute field upgrades, migrations, expansions, minor updates, patches, and fixes on live systems while minimizing plant downtime, • Perform routine system health checks, backups, disaster recovery testing, cybersecurity updates, and preventive maintenance activities, • Remotely monitor SCADA assets and infrastructure across multiple facilities to proactively identify service degradation, maintenance needs, or potential failures, • Manage SCADA user accounts, permissions, access controls, and security settings in compliance with client and cybersecurity requirements, • Respond to emergency situations, provide 24/7 on-call support (rotational), and participate in rapid-response fieldwork when required, • Thoroughly document all work including service tickets, root-cause analysis reports, as-built drawings, infrastructure inventories, and system changes, • Collaborate closely with Operations, Maintenance, Engineering, Administrative teams, project engineers, technical managers, and account managers to ensure long-term system reliability and client satisfaction, • Work within defined service-level agreements (SLAs), maintenance contracts, budgets, and schedules, • Ability to work remotely from home or local facility while maintaining high availability for remote support and occasional site visitsWhat you will need to succeed:, • Minimum of 5 years of experience in Control System Design, PLC Programming, and SCADA Development, • Experience with Ethernet IP and network switches., • Skilled in modifying HMIs and tuning PID loops., • Strong understanding of industrial power design (medium/low voltage)., • Ability to read and interpret P&IDs and wiring diagrams., • Experience installing and maintaining electrical components and systems., • Knowledge of safety protocols and hazard recognition., • Experience with Allen-Bradley PLC hardware and software (other PLC experience is a bonus)., • Experience with Allen-Bradley FactoryTalk, Schneider Wonderware, Ignition, GE Proficy iFix HMI software (other HMI package experience is a bonus)., • Experience configuring and developing graphics for OITs such as Allen-Bradley PanelView and Automation Direct C-More., • Experience with automated reporting software (such as SyTech’s XLReporter and HachWims);, • Hands-on experience configuring, interfacing with, and troubleshooting instrumentation found in the water and wastewater industry., • Associate or Bachelor’s degree in a related field is preferred., • Strong electrical and mechanical aptitude., • Experience with Microsoft Office suite (Teams, Word, Excel, PowerPoint)., • Computer networking experience (hardware and configuration) is a bonus, • Experience in higher programming languages (VB, C++, Java, Python) is a bonus. Coverage and support for your needs and well-being:•Disability: Paid short and long term disability•Health: Medical plan options; plus dental and vision plans.•Life: Basic employee group life insurance and AD&D benefits; additional voluntary life insurance for employees and families is available through Sun Life.•Wellbeing: DarioMind assistance program combined with personalized mental health and wellbeing resources. Equal Employment OpportunityWoodard & Curran is an Equal Opportunity Employer. Individuals with Disabilities and Protected Veterans are encouraged to apply. We are committed to ensuring our employment practices are non-discriminatory and based solely on job-related factors. If you have a disability and need a reasonable accommodation to apply, please contact Beth Sweitzer. Inclusion & BelongingWe welcome individuals from all backgrounds to apply, as we believe that different perspectives and experiences enrich our workplace and enhance our ability to serve our clients and communities effectively. At Woodard & Curran, we are committed to fostering a respectful and inclusive work environment. We understand that the best solutions for our clients and communities come from a culture that nurtures the success and growth of all employees. As an employee-owned organization, our dedication to fostering growth, access and opportunity empowers us to serve our clients effectively and advance our mission of making a positive impact on the world. Our success is rooted in supporting our team members to reach their full potential, enabling us to deliver the most innovative, sound and effective solutions to improve our communities around us. Non-Solicitation Disclosure:Please be advised that we do not accept unsolicited resumes or candidate submissions from recruitment agencies. Any resumes or candidate profiles submitted without a signed contract in place will be considered unsolicited and will not be eligible for any referral fees. Recruitment agencies must have a valid, signed agreement with our company prior to following the submission process to consider potential candidates. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Field Service Engineer SGM Magnetics - Lifting Division Position Summary The Field Service Engineer is responsible for hands-on commissioning, inspecting, troubleshooting, upgrading, and supporting SGM lifting magnet systems installed on overhead and outdoor cranes. This role requires frequent travel to customer facilities, primarily within heavy industrial and steel mill environments, and close coordination with the Engineering and After-Sales Departments in Italy. The position demands strong electrical and controls expertise, the ability to work independently in autonomous field conditions, and the professionalism required to represent SGM directly to customers. Key Responsibilities • Travel up to 60% of the time to customer facilities across the United States and Canada to:, • Commission new lifting magnet systems, • Perform inspections and preventative maintenance, • Execute system retrofits and upgrades, • Diagnose and resolve electrical, mechanical, and control-related issues, • Commission, test, and inspect high-voltage and low-voltage electrical systems installed on overhead cranes and outdoor cranes., • Troubleshoot and modify PLC-based magnet control systems, including:, • Hardware and software diagnostics, • Do program updates and ladder logic verification, • Understand and troubleshoot complete magnetic lifting devices, including:, • PLC and electromechanical controllers, • Industrial communication networks (Ethernet, DeviceNet, Profibus, Profinet), • AC/DC drives, • Battery backup systems, • HMI systems and wireless control network components, • Perform programming and troubleshooting using platforms such as:, • RSLogix 5000, • Studio 5000, • FactoryTalk View, • TIA Portal, • Other industrial control software tools, • Deliver customer training on system operation, safety procedures, troubleshooting, and best practices., • Interpret electrical schematics, wiring diagrams, and technical documentation to support commissioning and service activities., • Generate detailed service, commissioning, and inspection reports, including:, • Electrical measurements and troubleshooting, • Root cause analysis, • Corrective actions, • Photographic documentation, • Technical recommendations, • Maintain organized documentation of manuals, reports, drawings, and project-related files., • Coordinate technical clarifications and troubleshooting efforts with the Engineering Department in Italy., • Ensure strict compliance with safety standards, including work in steel mill environments, use of aerial lifts, and adherence to site-specific safety procedures. Work Environment and Physical Requirements • Comfortable working at heights and driving aerial lifts, • Stand and/or walk during shifts lasting up to 10 hours, • Work flexible schedules including weekends, nights, and holidays as required, • Operate in environments with varying noise levels, • Lift up to 50 pounds, • Frequently push, pull, squat, bend, reach, and climb stairs when applicable, • Work in heavy industrial and steel mill environments Required Qualifications • Bachelor's Degree in Mechatronics, • Willingness to relocate to the United States, • Strong knowledge of electrical systems (high and low voltage), • Knowledge working with PLC and PC-based control systems, • Knowledge in industrial communication protocols (Ethernet/IP, DeviceNet, Profibus, Profinet), • Knowledge working with HMI systems and/or other control network components, • Ability to read and interpret electrical drawings and technical documentation, • Strong verbal and written communication skills, • Excellent customer service and interpersonal skills, • Ability to work independently in an autonomous environment, • Willingness to travel up to 60% Compensation and Benefits • Starting Salary: $55,000 USD per year, • 6-Month Performance Review: Increase to $60,000 USD per year, • Housing: SGM will provide housing for two months during apartment search, • Benefits: United Healthcare (Medical, Dental, Vision, Life AD & D) paid by company, • SGM 401(k) Profit Sharing Plan, • Vacation and Paid Holidays, • TN Visa: SGM will assist and cover fees for TN Visa processing, • Relocation: SGM will cover flight to the U.S. and shipping of personal belongings (excluding vehicle and furniture) Company DescriptionSGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.SGM has developed a position of pioneer and leader on industrial lifting magnets and has extended its magnetic separation expertise to other in-house separation technologies that are inductive based sensor separators, X-ray separators, color sorters, gravimetric separation and processes. The SGM business model is based on providing technological expertise and to being close to its customers through a network of SGM Magnetics corporations located in Italy, Germany, UK, USA, China and India as well as a few long standing agents with extensive experience in the SGM products and technologies.

Job Description In addition to the responsibilities below, the Programmer will be responsible for the overall success of software design, database creation, and the implementation of procedures and standards used in the programming of controls projects. Responsibilities: As key member of the Albireo team, the Programmer will be responsible for developing unit controller programming and designing interface graphics of building automation systems to include, but not limited to: • Review of project specifications, drawings and project specific documents to establish project intent., • Breakdown scope of work into manageable segments and post to Project Manager for scheduling., • Attend or receive meeting minutes from graphics review meetings with customers., • Posting project programming specific “Request for Information” (RFI) documentation to System Engineer, Project Manager and Engineering Manager., • Follow sequence of operations as required by project documents and engineered sequence of operations, utilizing established standards and libraries., • Assist in startup and commissioning of large systems, such as AHUs, chiller plants, or other utilities systems. Includes installation/configuration of workstations, servers, and network., • Work independently or be part of small collaborative teams., • Work with field technicians to troubleshoot and take corrective action to software issues., • Bachelor’s degree in Mechanical Engineering, Electrical Engineering or Computer Science is preferred., • Degree may be offset by 3+ years programming BAS systems., • Experience with Schneider Ecostruxure, Tridium Niagara and/or JCI CCT/Metasys, • Understanding of mechanical HVAC equipment and sequence of operations., • Experience with building automation programming (Function Block, Ladder, or Text-based preferred) or other programming languages (e.g. C, C++, Java, VBA). Tridium system experience, preferred., • Thorough understanding of electrical and network wiring and the programming of BAS components., • Excellent computer skills and strong understanding of MS Office products (Word, Excel); AutoCAD, Visual Basic, Visio., • Effective interpersonal skills to represent the company to customers and other outside contacts in an ethical and professional manner., • Strong understanding of Modbus and BACnet protocols and integration of these technologies into BAS systems., • Ability to travel to and work on construction sites for commissioning/startup. Salary Range: $80,000-$135,000 USD annually DOE Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • Basic Life Insurance, • Voluntary Life Insurance, • Short Term & Long Term Disability, • Paid Vacation, • Paid Sick Time, • Paid Holidays, • 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are pd of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility: BEUMER Corporation is seeking an experienced, hands on Principal Controls Engineer with deep expertise in high throughput material handling automation, complex machine control, or large scale industrial systems. BEUMER solutions support the distribution and fulfillment operations of some of the largest and most recognizable global brands—from world leading e commerce marketplaces to top tier parcel carriers and major retail distribution networks. Our systems move millions of items every single day, and the controls platforms you work on will be at the center of that performance. This position is made for engineers who enjoy solving complex automation challenges, working closely with real machinery, and developing robust, scalable control logic—not managing people. You will directly contribute to BEUMER’s core control technologies used across high-speed sorters, advanced packaging & palletizing systems, and airport baggage handling equipment. Responsibilities Core Technical Responsibilities • Develop, refine, and maintain PLC‑based control systems for sophisticated material‑handling equipment and high‑speed sortation platforms., • Translate customer requirements and system specifications into clear, reliable, and efficient control logic., • Review electrical schematics, network architecture, and functional documentation as part of system development., • Work with electrical engineering teams on I/O structures, network topologies, and hardware selection., • Coordinate with PC software engineers to ensure smooth communication layers and system interaction., • Stay current with advancements in machine control technologies and industrial automation trends., • Collaborate with BEUMER’s global engineering organizations—including European development groups—to maintain alignment of controls standards and technical direction., • Prepare and test PLC hardware for projects when assigned., • Provide second‑tier technical support for escalations requiring advanced troubleshooting., • Assist in development efforts for packaging/palletizing or airport systems when needed. Compensation range: $160,000.00 - $180,000.00 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements/Skills and Abilities Required Background • Bachelor’s or Master’s degree in Controls Engineering, Electrical Engineering, Mechatronics, or equivalent technical expertise., • Strong proficiency with Allen‑Bradley (Rockwell) and Siemens TIA Portal platforms., • Deep understanding of advanced machine‑control concepts, system diagnostics, sequencing, and safety logic., • Ability to independently analyze, diagnose, and resolve complex technical issues in dynamic environments., • Excellent problem‑solving abilities and a strong attention to detail., • Clear and concise communication skills—written and verbal., • Ability to manage multiple tasks effectively in a project-driven environment. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential.

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Company LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • Base salary of $130K - $155K, • Full portfolio of medical, dental, and vision benefits, along with 401K plan and company match., • HSA, FSA, and life insurance offerings., • Maximize your professional development with our award-winning Learning & Engagement team., • Engage in our “We Care” culture through our ERGs, brought to you by EMBRACE. As Area Service Manager, you will be responsible for the traditional mechanical service component of the integrated ODR business including preventative maintenance, fixed price work orders, reactionary T&M and service projects performed by technicians through an assigned staff of service coordinators, associate area service managers and service technicians. Some examples of the work you might do includes: • Assumes responsibility for achievement of their area sales and operational gross profit and cash management goals., • Assumes the responsibility for maintaining and retaining ODR customer relationships through quality of service, timely execution and proper staffing., • Manages staff to maximize pull through opportunities and margins from captive accounts., • Manages maintenance contract execution for timeliness, quality and profitability through proper pre-planning, staffing and scheduling so as to minimize non-productive and/or idle time., • Renews maintenance contracts within the given service area at target escalation and pricing levels to successfully meet the target margins of the Company., • Develops excellent customer relationships by positioning the company to be the first call, “go-to” trusted source for technical service and maintenance needs., • Maintains high visibility with customers and makes frequent visits in support of the account objectives., • Ensures the service team plans and manages work with a unique understanding of the customer’s ongoing operations in mind resulting in minimal disruption to the customer’s business objectives., • Partners with the service coordinator and field operations staff to plan out daily and weekly manpower and technician needs to support the customers., • Understands the company’s broader MEP solutions capabilities outside of service and actively collaborates across the branch to ensure a seamless customer experience and capture additional wallet share through the deployment of personnel and/or staff needed to propose the branch’s full suite of sales offerings., • Collaborates with Account Executives, Account Managers, Sales Representatives, Special Projects Managers and major project operations teams to ensure client needs are met., • Participates in strategic account planning designed to increase recurring revenue from captive accounts, • Ensures all purchasing is completed in a timely and cost-effective manner., • Possesses strong financial acumen and command of departmental profitability., • Maintains the accuracy of all business records, reports, logs, and data, and submits regular reports to management to communicate booking/selling activity within a specified time frame., • Ensures all work is billed promptly upon completion or per the terms of appropriate contract documents., • Monitors payment of customer invoices and follows up on all departmental receivables over 60 days past due., • Hires, trains, and develops staff capable of performing the work required to meet customer commitments., • 4+ years of related employment experience required., • Advanced knowledge of the HVAC/controls industry required., • Strong attention to detail and ability to multitask in a fast-paced environment., • Intermediate level computer skills, including proficiency with Microsoft Office (Excel in particular)., • Capacity to leverage communication/interpersonal skills to develop and enhance business relationships., • College degree or advanced education preferred., • Previous experience in a mentor, supervisory, or management role is a plus., • Familiarity with back of house facilities maintenance staff personnel and operations., • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • This position operates primarily in a professional office environment, and routinely utilizes standard office equipment, such as computers, phones, copiers, and filing cabinets., • In performing the duties of this job, the incumbent is regularly required to walk, talk, stand, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary work position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Salary: $140,000 - $160,000 per year A bit about us: Our client, a leading company in the power construction industry, is seeking an experienced Project Manager to oversee large-scale electrical infrastructure and power distribution projects. Bachelor's degree in Engineering or a related field.

National Church Residences - - Responsibilities: Perform routine and preventive maintenance on HVAC, plumbing, electrical, and safety systems; Diagnose and repair mechanical, electrical, and plumbing issues; Supervise and train junior maintenance staff; Manage inventory and order supplies; Document

Why join us? Benefits 401(k) 401(k) matching Dental insurance Flexible schedule Flexible spending account Health insurance Life insurance Job Details Job Details: Are you a dynamic, solution-oriented individual with a passion for manufacturing and engineering? We are on the hunt for a Permanent Proj

Berkeley Heights, NJ (Only Locals OR Can Relocate).We are looking for an experienced.Banking, Payments, and Credit Card domains.The ideal candidate should have started their career as a Java or.NET Developer and transitioned into a Project Management role.The candidate should have hands-on experienc

Bachelor's degree in construction management, Mechanical Engineering, related field and/or equivalent experience.

Staffing Industry Analysts for our accelerated growth of 300% in the last 3 years with over 5500+ employees globally, with over 30+ locations in the US and global operations in 32 countries.We believe in providing staffing solutions to address the current talent gap – Right Talent – Right Time �

Our North American Headquarters is located in Central New Jersey directly off Route 287 is where we maintain significant "on-time" inventory of electrical interconnects that are produced in our factory in Germany. The Manufacturing Engineer II plays a key role in supporting production and

This role combines mechanical, electrical, and troubleshooting expertise to keep production lines running efficiently across processing, seasoning, conveying, and packaging operations. Diagnose mechanical, electrical, pneumatic, and hydraulic issues to restore equipment to safe, efficient operation.

Bachelor's degree in Chemical Engineering, Process Engineering, or a related field. Strong understanding of chemical engineering fundamentals, including fluid dynamics, thermodynamics, and heat transfer. Knowledge of industrial electrical control panels and their integration with manufacturing equip

Bachelor's degree in computer science, Information Technology, Engineering, or a related field.

You should be able to speak the language of engineers and understand the nuances of the SDLC.

Facilitate communication between field construction teams, engineering, and project management to ensure alignment on scope, schedule, and priorities. Assist with identifying engineering bottlenecks and escalating potential risks impacting project delivery. Engineering, Construction Management, or a

If you are a Construction Project Engineer with 1+ years of ground-up construction experience then please apply!. Year Degree in Architecture, Construction Management, Engineering, Project Management, or a related discipline.

Maintain project objectives and set expectation for project teams.Set project meeting agenda, materials, and other artifacts.Lead project meetings and drive progress according to project milestones.Manage changes to the project scope, project schedule and project costs using appropriate verification

Project Administrator - Data Center Information Technology/Design/Engineer Firm. NJ Data Center growing Information Technology/Design/Engineer Firm is seeking a Project Administrator to join our team. Other responsibilities normally performed in the execution of a Project Administrator position acco

Supporting other Quality Engineering activities related to Lifecycle Management (LCM) and DHF Maintenance. Design Controls & Requirements Management. Bachelor's degree in Engineering, Quality, or a related technical field.

LTIMindtree is an equal opportunity employer that is committed to diversity in the workplace.Our employment decisions are made without regard to race, color, creed, religion, sex (including pregnancy, childbirth or related medical conditions), gender identity or expression, national origin, ancestry

Bachelor's degree in civil engineering, Structural Engineering, or related field. As a Project Engineer for Doka USA, you will play a crucial role in the planning, design, and execution of construction projects. This role will be based out of our Northeast branch located in Kenilworth, NJ, and will

Coordinate and communicate with all project stakeholders, including clients, architects, engineers, subcontractors, and vendors to ensure alignment and successful project outcomes.

Bachelor's degree in Civil Engineering, Structural Engineering, or a related field. Leveraging your expertise in structural engineering, project management, and leadership, you will collaborate with cross-functional teams to deliver high-quality formwork solutions that meet project objectives, adher

Position Summary: Work as a Project Staff Engineer in the Customer Energy Solutions organization, utilizing a broad knowledge of business and energy engineering principles and practices acquired through progressive field and academic experience. Project Staff Engineer Job Summary: Talent Senior Serv

Bachelor's degree or higher in Electrical Engineering, Computer Engineering, Computer Science, Systems Engineering, Physics or related STEM degree with minimum 5 years' leadership or technical related experience. Mentor early career engineers in the systems engineering activities required to deliver

Ensures that maintenance to all electrical equipment is completed and complies with customer specifications, and ensures that food safety and quality are not jeopardized by complying with all GMP and HAACP Guidelines as well as SOPs. Must have prior experience maintaining and troubleshooting electri

Since its founding in 1992, Edgewood Properties has established itself as a leading real estate development and property management company.With corporate headquarters in New Jersey, the company is on a course of growth leading to activities across the nation.Given ongoing construction and developme

Strong electrical troubleshooting skills. Opportunity to continue building your skills in controls and automation. Work with electrical systems, wiring, conduit, and panels.

Mechanical and electrical skills.

Performance Foodservice - [Maintenance Technician] As a Maintenance Mechanic at Performance Foodservice, you'll: Repair and maintain industrial equipment and machinery; Troubleshoot mechanical issues and perform preventative maintenance tasks; Ensure all equipment is operating efficiently and safely

Troubleshoot and repair electrical systems, including PLCs, motors, and VFDs. Read and interpret blueprints, schematics, and electrical diagrams. Install and modify electrical components and wiring.

Mechanical and electrical skills.

Multifamily or construction site experience as well as prior experience related to carpentry, plumbing, electrical, appliance, HVAC, and building systems is a nice-to-have. Mechanical and electrical skills.

Installs, repairs/replaces, and tests associated electrical circuits and equipment using appropriate tools and testing instruments. Troubleshoots electrical wiring and components. Perform other electrical job-related duties as need.

Under general supervision and in accordance with acceptable trade practices performs installation, repair, and replacement of electrical and electronic circuit control, motors, transformers, switchboards, and other equipment, and performs major and minor repairs and installations of all mechanical,

Sligan Plastics - - Responsibilities: Troubleshoot, maintain, repair, and modify electrical systems; Investigate mechanical, operational, and electrical issues and take corrective action; Perform maintenance, wiring, and installation of motors, switches, fuse boxes, lighting, and power circuits; Cr