Electrical controls engineer jobs in Rochester, New YorkCreate job alerts

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Electrical Engineer (Rochester, NY) Job Code: 25528 Job Description: * Determine design approaches and parameters * Perform system analysis to determine feasibility of design within time and cost constraints * Utilize modeling tools and equipment to establish operating data, conduct experimental tests, and evaluate results * Select components and equipment based on analysis of specifications and reliability * Perform simulations and present design reviews to peer engineers * Write scripts to control synthesis and build tools Qualifications: * Bachelor’s degree in Electrical Engineering, Computer Engineering, Electrical & Computer Engineering, Materials Engineering, Materials Science Engineering or related field Preferred Skills: * Knowledge and/or experience with VHDL, MCM, HFSS, Network, Power, Analog, Antennas, Controls, ENE, RF, Photonics, Modem, EDA, DSP, MATLAB, Communication Systems, FPGA, Aerospace industry or Optical Engineering * Knowledge of Code V and/or Zemax software tools * Excellent communication, technical writing and presentation skills * Knowledge of FRED, Matlab, Python * Knowledge of and/or understanding circuit analysis and operational concepts * Familiarity with various computing environments (LINUX/Windows) In compliance with pay transparency requirements, the salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is $61,000- $113,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Electrical Engineer (Rochester, NY) Job Code: 25528 Job Description: - Determine design approaches and parameters - Perform system analysis to determine feasibility of design within time and cost constraints - Utilize modeling tools and equipment to establish operating data, conduct experimental tests, and evaluate results - Select components and equipment based on analysis of specifications and reliability - Perform simulations and present design reviews to peer engineers - Write scripts to control synthesis and build tools Qualifications: - Bachelor’s degree in Electrical Engineering, Computer Engineering, Electrical & Computer Engineering, Materials Engineering, Materials Science Engineering or related field Preferred Skills: - Knowledge and/or experience with VHDL, MCM, HFSS, Network, Power, Analog, Antennas, Controls, ENE, RF, Photonics, Modem, EDA, DSP, MATLAB, Communication Systems, FPGA, Aerospace industry or Optical Engineering - Knowledge of Code V and/or Zemax software tools - Excellent communication, technical writing and presentation skills - Knowledge of FRED, Matlab, Python - Knowledge of and/or understanding circuit analysis and operational concepts - Familiarity with various computing environments (LINUX/Windows) In compliance with pay transparency requirements, the salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is $61,000- $113,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

Division: New York North Project Location(s): Rochester, NY 14642 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt The salary range for this position is estimated to be 99,000.00 - 148,000.00 USD annualized. Position Description: Leads, directs and coordinates the work of subcontractors and/or Turner trade labor with regard to the Mechanical and Electrical systems included in the project. Responsible for ensuring safety, schedule delivery, quality of work performed and adherence to budget of the project. The Superintendent Mechanical-Electrical has supervisory responsibility for Assistant Superintendents, Field Engineers, Interns and trade labor in his/her area of responsibility. Reports to: Project Superintendent, Project Manager or MEP Manager Essential Duties & Responsibilities*: Specifically relating to the mechanical and/or electrical systems (e.g. HVAC, Plumbing, Electrical, Low Voltage, Fire Sprinkler): • Managing and making decisions related to the performance of work related to scheduling, delivery, logistics, quality control and trade employee staffing levels., • Managint work among assigned trades to promote a coordinated project operation. Resolving local area problems regarding procedures, precedence, design clarifications, adequate labor and equipment, schedule and all other appropriate matters., • Managing the overall site safety program as required and ensuring subcontractor compliance with Turner standards and all applicable safety codes and regulations., • Supervising and developing Assistant Superintendents, Field Engineers and/or interns, as assigned, including providing input on or completing performance appraisals., • Ensure strict adherence to ethics and compliance requirements at all times., • Creating schedules and determining sequencing of work. Developing and implementing recovery strategies to maintain project schedule and budget., • Communicating with owners and architects/engineers in connection with field issues. Investigating and resolving such issues., • Managing the billing process as it relates to work in place and overseeing the monthly estimate of work completed, payrolls, material invoices and subcontractor payment applications., • Managing the work to ensure that it is installed in compliance with and conforms to the approved contract documents., • Working with the Engineer on the coordination effort for all mechanical and electrical systems, equipment and piping layouts for all trades on a master coordination set of drawings and 3D model securing the approval of the architects and engineers., • Leading project inspections, startup, commissioning, turnover and training process, and punchlist required for acceptance and handover of all the systems., • Coordinating, directing, and monitoring the activities of subcontractors and suppliers, to insure conformance with plans, specifications, local and national codes., • Reviewing project changes in conjunction with the Project Engineer., • Keeping detailed daily records of MEPS trade contractors' work progress. This is not a remote/hybrid position and will be based in a Turner office or project location. Qualifications: Bachelor's degree or at least four years of formal engineering or architectural experience and a minimum of six years of mechanical/electrical/plumbing construction experience required, or an equivalent combination of education, training and/or experience. Knowledge of building construction, means and methods, scheduling and cost control procedures, general contract, general conditions, subcontract documents, drawings and specifications. Specific knowledge of Mechanical and Electrical Systems. Thorough knowledge of building information modeling and its use in coordination of the Mechanical and Electrical systems and other project systems. Proven written and verbal communication abilities; proficiency with computer applications, including Microsoft Office suite. Ability to read, understand and interpret contract documents, drawings, specifications, scopes of work and project schedule. Demonstrated leadership and interpersonal skills. Physical Demands: Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires useof hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 75 pounds. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. *May perform other duties as assigned. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: New York North Project Location(s): Albany, NY 12201 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt The salary range for this position is estimated to be $140,000.00 - 200,000.00 annualized, which represents the company's good faith and reasonable estimate of the range of possible compensation at the time of posting. Additionally, Turner Construction provides flexible benefits, including medical, dental, and vision coverage, financial benefits such as a 401(k) plan, Health Savings Account, Flexible Spending Account, wellness benefits, a voluntary legal plan, identity theft, life insurance, short-term and long-term disability coverage. ***This is a traveling role supporting other areas of the country, it will not be based in NY. We're looking for people who are open to domestic travel. We pay a monthly Living & Travel stipend for this role. Position Description: Oversee and direct preconstruction, engineering and field installation of all Mechanical, Electrical, Plumbing (MEP) systems. Reports to: Project Manager, Project Executive Essential Duties & Responsibilities*: Specifically relating to the mechanical and electrical systems (e.g. HVAC, Plumbing, Electrical, LowVoltage, Fire Sprinkler) • Develop and maintain relationships with engineers, design consultants, subcontractors, suppliers, inspectors, and owner's representatives to ensure alignment with client goals and expectations from initiation to completion of the project., • Comprehensive knowledge and understanding of the contract documents (including Turner's contract, plans, specifications and applicable codes)., • Lead, supervise and develop Turner MEP staff, including providing input on or completing performance appraisals., • Oversee daily activities of Engineer-MEP, Superintendent-MEP, and subordinates. Qualifications: Bachelor's degree and minimum 10 years' experience with progressively more responsible exposure to design, cost, sequence, logistics and field installations of Mechanical and Electrical systems or equivalent combination of training and experience. Able to identify design features that command cost premiums and recommend alternatives that deliver comparable or improved function. Demonstrated ability to present technical material. LEED accreditation preferred. Very strong oral and written communication skills required. Strong computer skills and a familiarity with Microsoft Office Suite of programs. Knowledge of project management and scheduling software desirable. Ability to implement leading edge technologies to benefit the project. Demonstrated leadership and interpersonal skills. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 lbs. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is sometimes exposed to moving mechanical parts. The employee is occasionally exposed to airborne particles or caustic chemicals. The noise level in the work environment is usually moderate. *May perform other duties as assigned. Where applicable, all activities will include disabled and veterans' organizations. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Are you a skilled electrical engineer with a passion for delivering high-quality infrastructure solutions? We’re seeking a Senior Project Engineer to join our Northeast Electrical Engineering team and take a leading role in the design and execution of critical facilities and infrastructure projects throughout the Northeast. In this role, you’ll lead projects through the full lifecycle—from planning and design to construction support—while mentoring junior engineers and fostering strong client relationships. You’ll bring deep technical expertise in electrical engineering design and a collaborative mindset to help deliver innovative, sustainable, and cost-effective solutions. With the opportunity to work on transformative projects, our team is growing rapidly—and so are the opportunities. You’ll step into a role with clear pathways for advancement, the chance to shape the future of our team, and the support, visibility, and resources to take your career wherever you want it to go. Position Responsibilities • Project Leadership: Oversee the entire project lifecycle, from initial concept development through construction and closeout. Provide technical leadership and ensure quality and efficiency at every stage., • Design Expertise: Apply advanced knowledge in transportation design to develop creative, efficient solutions for roadway and infrastructure projects. Prepare design reports, plans, specifications, and bid documents., • Team Development: Mentor and support junior engineers, sharing technical knowledge and project management best practices. Foster a collaborative, growth-oriented team culture., • Bachelor’s of Science or Technology degree in electrical engineering., • Licensed Professional Engineer (PE) in New York State., • Minimum 8 years of experience in electrical engineering design, with a strong focus on Public and Private facilities infrastructure projects., • Proficiency in AutoCAD and Revit., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash analysis., • Proficiency with the National Electric Code., • Experience with the layout and design of medium and low voltage distribution systems., • Experience with the layout and design of lighting systems and controls. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Job Summary: The Coating Engineer provides engineering support for vacuum thin-film coating processes used in the manufacturing of optical components. This role working closely with other engineers and manufacturing staff. Essential Duties and Responsibilities: • Provide engineering support for PVD optical coating production, spanning development, production support, and process sustainment., • Work closely with design, and other manufacturing teams to transition coating solutions into stable and repeatable production processes., • Support Operations through guidance on substrate preparation, cleaning methods, coating materials, process parameters, tooling, and manufacturing improvements., • Assist shop-floor personnel with the setup, operation, and interpretation of optical thin-film measurement and characterization tools., • Investigate and resolve coating-related challenges in a production setting, including process evaluation, data analysis, and documentation of findings., • Present technical considerations, risks, and tradeoffs to leadership to aid project planning and operational decision-making., • Enhance coating designs and deposition processes with a focus on yield, performance consistency, scalability, and cost control., • Drive problem-solving and corrective action efforts for coating process issues using structured analysis methods., • Develop and deliver training to technicians on optical coating processes, equipment use, and standard operating practices., • Track process performance and lead initiatives aimed at continuous improvement and manufacturing efficiency., • Support the optimization and troubleshooting of optical coating equipment and associated processes., • Raises individual performance to a level that results in proactive responses to problem solving and continuous improvement., • Performs other related duties and assignments as required, depending on candidate skill set and on an as-needed basis to support evolving business needs. Physical Demands and Work Environment: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. The employee is occasionally required to reach with hands and arms. The employee is occasionally required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 40 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate. Education, Skills and Experience: • Bachelor’s degree in optical, electrical, manufacturing or mechanical engineering. Experience will be considered in lieu of degree., • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Proficiency in coating design software and optical simulation tools., • Basic analytical skills, including basic statistical analysis., • Basic computer skills, including Microsoft Office and Windows operating systems., • Must possess experience related to troubleshooting and repairing optical coating chambers., • Availability outside of normal business hours to answer technical related questions., • Good oral and written communication skills., • Strong time management skills., • Work independently with minimal supervision.

Job Description About the Role: The Industrial Engineer position comprises of a balance of technical expertise in data/metric analysis with a strategic drive to create value through process improvements, cost reduction and product improvement. The Industrial Engineer is instrumental in achieving operational excellence through innovation, development, evaluation, and implementation of superior methods and systems. The Industrial Engineer will partner with leadership throughout the organization to understand their business needs and put them in the best position for success by delivering robust continuous improvement plans. What You’ll Be Doing: • Lead the identification, evaluation, and implementation of automation opportunities across molding, assembly, machining, material handling, and secondary operations to improve safety, throughput, and cost competitiveness, • Act as a change agent for digital transformation, promoting a data-driven culture and training teams on new automated and connected manufacturing technologies, • Serve as the plant technical owner for Industry 4.0 initiatives, including data connectivity, machine monitoring, and digital workflows that enable real-time visibility into production performance, • Partner with Operations, Maintenance, IT, and Quality to integrate equipment, sensors, and control systems with existing manufacturing execution, maintenance, and reporting platforms, • Develop and standardize digital work instructions, automated data capture, and electronic production reporting to reduce manual inputs and improve data accuracy, • Support capital investment planning by building automation business cases, including ROI analysis, payback modeling, and risk assessment, • Drive continuous improvement through the use of manufacturing data analytics, identifying trends, constraints, and opportunities for process optimization, • Support new program launches by ensuring automation readiness, scalable cell design, and alignment with future-state manufacturing strategy, • Work closely with Finance to maintain BOM system, including the creation of new BOMs and revision of current BOMs., • Develop and implement Machine Operator Training Program., • Initiate, update and maintain Machine Operator work instructions on a daily basis., • Work actively on continuous improvement projects that involve the entire organization such as Kaizen, 5S, Lean Manufacturing and Visual Recorder., • Work with Manufacturing and all other facets of the organization to improve all ergonomic conditions on presses and machinery, while anticipating/evaluating hazardous conditions by identifying them prior to accident occurrence., • Coordinate Safety initiatives and lead Company to resolution on environmental, health and safety issues., • Provide guidance for packaging engineering methods and standards on a daily basis. Work with customers to define standard packs and returnable packaging. Work with customers to define and develop alternative packaging. We would love to hear from you if: • Bachelor’s Degree (B.A./B.S.) from four-year college or university; or two to four years of related experience and/or training; or equivalent combination of education and experience. Technical Skills • Proficiency in CAD software (SolidWorks, NX or equivalent) for layout design, automation cell concepts, tooling fixtures, and process documentation, • Working knowledge of PLC-controlled equipment and industrial controls, with the ability to interface effectively with OEMs, integrators, and maintenance teams for troubleshooting and system optimization, • Experience developing or supporting automated manufacturing cells, including robotics, conveyors, vision systems, or automated assembly equipment, • Strong understanding of industrial networks and data connectivity to support machine integration and data capture, • Ability to interpret and develop electrical schematics, P&IDs, and control narratives, • Familiarity with manufacturing data systems such as MES, machine monitoring platforms, CMMS, or ERP integrations, • Experience with capital equipment specification, FAT/SAT, commissioning, and validation, • Advanced Excel skills and comfort working with manufacturing data analytics tools (Power BI, SQL, or similar preferred), • Exposure to robot programming or structured automation programming standards, • Understanding of cybersecurity considerations in connected manufacturing environments Language Skills: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers and the general public. Mathematical Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios and proportions to practical situations. Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job DescriptionManufacturing Engineers (Process, Controls, Continuous Improvement) Multiple U.S. Locations | Onsite & Hybrid Opportunities $90K – $160K+ (higher for senior/specialized talent) Build What Powers Industry. Engineer What Scales. Northwest Talent Solutions is actively building a national network of high-performing Manufacturing Engineers to support current and upcoming opportunities across leading organizations in: • Advanced Manufacturing, • Building Materials, • Automotive & Industrial Equipment, • Optimize manufacturing processes to improve yield, throughput, and cost efficiency, • Lead continuous improvement initiatives (Lean, Six Sigma, Kaizen), • Design, implement, and troubleshoot automated systems and production lines, • Partner with operations, maintenance, and leadership to drive plant performance, • Support capital projects, including equipment upgrades and new line installations, • Analyze production data to identify and eliminate bottlenecks and waste, • Ensure compliance with safety, quality, and regulatory standardsWe're Looking For Engineers With Experience In, • Manufacturing / Process Engineering, • Controls Engineering (PLC, HMI, SCADA), • Industrial / Production Engineering, • Continuous Improvement (Lean / Six Sigma), • Maintenance & Reliability Engineering Core Qualifications:, • Bachelor's degree in Engineering (Mechanical, Electrical, Industrial, or related), • 3–10+ years of experience in a manufacturing environment, • Experience with:, • Process optimization and production support, • Root cause analysis and problem-solving, • Lean / Six Sigma methodologies, • Strong ability to work cross-functionally in fast-paced production environments Highly Desired Skills:, • PLC programming (Allen-Bradley, Siemens, etc.), • Experience with automation, robotics, or controls systems, • Capital project leadership experience, • Six Sigma certification (Green Belt / Black Belt), • Experience in high-volume or continuous manufacturing environments Compensation:, • $90K – $160K+ base salary, • Higher for:, • Controls / automation expertise, • Multi-site or capital project leadership, • Specialized industry experience, • Midwest: Ohio, Indiana, Michigan, Wisconsin, • Southeast: Tennessee, Georgia, Alabama, South Carolina, • Texas & Gulf Coast: Houston, Dallas, Baton Rouge, • Mountain West: Colorado, Utah, • Access to multiple active and upcoming roles—not just one opportunity, • We match you based on skillset, goals, and location preference, • Deep specialization in manufacturing and technical recruiting, • Fast, transparent communication and real-time market insight Even if you're not actively looking, we welcome the opportunity to connect and keep you informed of relevant opportunities as they arise. #ManufacturingEngineer #ProcessEngineer #ControlsEngineer #IndustrialEngineering #LeanManufacturing #SixSigma #Automation #PLC #ContinuousImprovement #EngineeringJobs #NowHiring #OperationsExcellence #SmartManufacturing #NWTS

Job Description Title Coating Engineer (Thin Films) Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: The Coating Engineer position is responsible for supporting the vacuum thin film coating manufacturing of both catalog and specialty optical components and includes interacting with other engineers and manufacturing staff. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: • Support the manufacturing of PVD thin film coatings in all directions., • Collaborate with R&D and manufacturing to ensure successful implementation of coating designs., • Provide technical support to Operations on proper substrate handling, cleaning techniques, coating materials, coating designs, coating tools and continuous improvement of manufacturing methods., • Assist manufacturing staff in the operation and utilization of metrology instruments for thin film characterization., • Identifying and diagnosing issues on the production floor, as well as collecting and preparing supporting data, especially with regards to coating equipment and processes., • Provide management with technical tradeoffs and risks pertaining to project work as well as general engineering efforts such that management may make informed decisions., • Improves coating designs and processes for manufacturability, performance, and cost., • Leads root cause analysis / corrective action activities for coating related processes., • Trains technicians on the execution of optical coating manufacturing processes., • Monitors and drives continuous improvement of manufacturing processes., • Supports troubleshooting of existing optical coating equipment and processes. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively Physics or Materials Science. Minimum of 2 years experience in optical thin film coating design and manufacturing. • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage. Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: * While performing the duties of this job, the employee is regularly required to use hands and fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear * The job may involve prolonged periods of sitting/standing. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain). * Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. * Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) * Generally, works in a clean environment and works to maintain the environment as such. * Safety Glasses are required and may require area specific safety training. * This position works in a manufacturing environment. The noise level in the work environment is usually loud. * The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles. * May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job DescriptionAbout us:Aeva’s mission is to bring the next wave of perception to a broad range of applications from automated driving to industrial robotics, consumer electronics, consumer health, security, and beyond. Aeva is transforming autonomy with its groundbreaking sensing and perception technology that integrates all key LiDAR components onto a silicon photonics chip in a compact module. Aeva 4D LiDAR sensors uniquely detect instant velocity in addition to 3D position, allowing autonomous devices like vehicles and robots to make more intelligent and safe decisions. Role Overview:Aeva is seeking to hire a talented and motivated Sr/Staff Hardware Engineer to join our EE HW team. The EE HW team owns the design, build and bring up of Aeva’s mixed-signal PCBs. As a Hardware Engineer, you may be responsible to develop a System Architecture of our LiDAR system based on product requirements. You will be working closely with all EE engineers to define the individual PCBs, their function, and interconnections.What you’ll be doing: • Break down product requirements into an architecture and EE PCB designs and their interconnections, • Work closely with Electrical Engineers as well as cross-functional engineering and product teams to review their designs in terms of function and layout placement, • Optimize architecture to reduce HW and SW complexity as well as optimize for cost and power consumption, • Direct ownership of PCBs and sub-systems of a LiDAR from schematic design through layout, fabrication and bringupWhat you have:, • BS, Masters or PH.D. degree in Electrical Engineering or related field, • 6+ years experience in HW design from architecture to implementation, prototyping and bringup all the way to high volume production, • Deep understanding of HW components, their interfaces and SW controls, • Good understanding of high speed designs with a variety of communication protocols (I2C, SPI, UART, Ethernet, PCIE etc), • Demonstrated experience and technical leadership in data acquisition subsystems including high-speed ADCs, high-precision analog sense paths and high-speed serial interfaces, • Demonstrated experience utilizing commercial SI/PI software tools, • Released several complex, multi-layer PCB designs into high volume production, • Be an active team member working closely with other EE engineers and other groups, • Ability to technically lead a small team of HW engineers is a plus, • Experience in motion control systems, design and theory is a plus

Controls Electrical EngineerPosition OverviewWe are seeking a skilled ControlsElectrical Engineer to join our team. Proven experience in electrical engineering roles, specifically in industrial settings. QualificationsBachelor's degree in Electrical Engineering or a related field.

Job Description Title: Service Engineer Reports to: Service Expert Coordinator Location: DMG MORI TC Hours: Monday through Friday, 8:00am to 5:00pm Classification: Non Exempt Travel: 50% Employment is conditioned on DMG MORI's ability to obtain and maintain any necessary export licensing. Service Engineers are expected to provide customers with maintenance and repair assistance of DMG MORI CNC machine tools on location or by telephone. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skills, and abilities required. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform the essential functions. Responsibilities include up to and not limited to: • Provide customers with maintenance, repair, and installation assistance of DMG MORI CNC machine tools on location or by telephone., • Creating and updating documentation of technical information., • Developing, preparing, generating, and analyzing ongoing and ad-hoc special reports pertaining to Service, • Demonstrating a willingness to help others and be a team member; often working together with Customer’s Service Engineers., • Providing assistance and training to Customer’s Service Engineers on the installation and maintenance of newer product lines., • Establish and build exemplary communication and customer service relationships with customers., • Manage difficult customer situations in a positive manner, respond promptly to customer needs and solicit customer feedback to improve service., • Bachelors or Associates Degree in technical related field of study preferred., • 3-5 years of experience in electrical and mechanical troubleshooting and maintenance of CNC machine tools., • Experience working with DMG or MORI SEIKI machines, Fanuc, Mitsubishi, and/or Siemens and controls are a PLUS., • Good verbal and written communication skills with exceptional customer service orientation., • Must be able to interact and effectively communicate in person and over the phone with people at all levels of an organization., • Proven ability to read mechanical drawings, electrical schematics, and sequence (PLC) ladder diagrams., • Basic computer literacy and working knowledge of MS Word, Excel, and Outlook., • Must be adaptable to changes in the work environment; manage competing demands and able to deal with frequent change, delays or unexpected events., • Minimum of 50% travel in multi-state region; drive or fly depending on distance. Employee is expected to work at the Technical Center when not visiting customers. Work Environment: Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated and manual machinery. General office environment experienced at DMG MORI office. Physical Demands: Frequent: Travel, operating a vehicle, sitting, standing, walking, bending, squatting, stooping, and reaching. Pushing, pulling, and lifting objects. Repetitive foot, leg, hand, arm, shoulder, and torso movements. Periodic: Operating power equipment, sitting at desk, utilizing computers and phones. Occasional: Lifting or moving up to 50lbs. We are an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse screening

Job DescriptionElectrical/Controls Engineer Job Title: Electrical/Controls Engineer Date: 2/29/2026 Location: Rochester, NY Job Description: We are part of the world wide GH Group in Rochester, New York that supplies integrated induction heating systems worldwide. We are looking for an Electrical/Controls Engineer with controls systems design experience to join our team. Responsibilities include electrical schematics, electrical hardware specification, controls/interface programming, and communicating with both customers and vendors. Individual needs to be a motivated team player with excellent problem solving, communication, and interpersonal skills. Paying 65K-100K per year depending on experience. Responsibilities: Prepare electrical schematics, including panel layouts and bill of materials. Size equipment such as drives, relays, power supplies and contactors. Prepare data sheets, Order of Operation and other documentation on equipment. Obtain technical information from equipment suppliers. Recommend creative, technically feasible solutions that satisfy customer needs, while adhering to engineering standards and strategic direction. Evaluate state-of-the-art technological developments in various controls systems, and apply the latest advances. Apply engineering techniques in designing a control system that is reliable, serviceable, energy efficient and competitive. Interface with Sales, Mechanical, Machine Shop, Build, Service, personnel as well as a multi-tier supplier base. Work with in worldwide product regulation and compliance to design systems that meet both customer and government regulations, restrictions and codes. Strive for continuous improvement in both processes and products. Requirements: Minimum Education Associates Electrical Engineering/Technology Strong troubleshooting and analytical problem solving skills Proficient in Microsoft suite of products Willing to travel when/where required. Desired Knowledge/Skills: Experience working with PLC from various manufactures such as Allen-Bradly, GE, Wonderware, etc. Education BS Electrical Engineering or Controls Engineering or Electrical Engineering Technology General understanding of industrial equipment operations. 3 years work experience in Electrical/Controls Engineering of industrial systems Excellent verbal and written communication skills. Experience with documenting designs, using computer aided design systems, for electrical or mechanical, is strongly preferred. Experience with EPlan would be a plus GH Induction Atmospheres offers employees a benefit package including medical, 401(k), and profit sharing. Qualified individuals please email resumes to for immediate consideration.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance:We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $80,000 - $90,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR N4jTrb8oH0

Job DescriptionDescription: Position Summary: The Junior Mechanical/Manufacturing Engineer is a dual role between the two disciplines. The candidate must be an energetic, self-starter able to support manufacturing and perform mechanical systems engineering for state of the art near eye imaging hardware. For manufacturing they will be responsible for assisting in Vuzix’s manufacturing processes, to support the direct supply chain issues from receipt of goods through the manufacturing, and for the assembly process to outgoing shipments. Will troubleshoot and diagnose assembly processes and reduce total defects through the analysis of data and corrective actions. For mechanical they will be responsible for supporting the various project groups in the way of CAD design and documentation, laboratory work, testing, and prototyping. They will collaborate within their own team as well as Electrical, Optical, and Quality Eng to support tasks within both R&D and Production. This position will also support the functions of the R&D – Mechanical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the Quality Objectives established by Top Management. Essential Duties and Responsibilities: • Design and/or enhance manufacturing processes to assemble a bill of materials into a final product., • Utilize methods for waste minimization within a manufacturing system and address productivity., • Lead process improvements and controls through use of Six Sigma analysis and inspection/validation techniques., • Document Corrective Actions and Preventative Actions., • Generate, validate, and update as needed assembly work instructions in a clear and presentable configuration., • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Support both assembly floor priorities and longer-term development project activities., • Design and modify mechanical portions of existing and future products using SolidWorks CAD software., • Design, assemble, and test prototypes/mock-ups using 3D printing and other rapid prototyping techniques, • Gather the necessary information and create the engineering documentation to submit and implement engineering changes (ECO/ECN)., • 1-2 years’ experience in new product introduction and/or sustaining engineering., • Minimum Bachelor's degree (BA/BS) in mechanical engineering., • Working knowledge of SolidWorks and PDM., • Use of techniques such as additive manufacturing/3D printing to create models, various fixtures, etc., • Understanding and application of GD&T., • Strong interpersonal, communication, and time management skills with the ability to solve problems and multi-task in a fast-moving environment., • Experience in utilizing automation such as robotic assistance and metered dispensing systems, PLC, and Vision Systems as utilized for aiding productivity in manufacturing., • Operation and use of 3D printers as well as design integration/application of 3D printed parts. Preferred Qualifications: • Knowledge of standard manufacturing techniques such as fastening, structural adhesive bonding, hand assembly/low volume operations and tools and functional product testing., • Experience with precision alignments, tolerance analysis, and associated documentation control., • Experience with design and reliability testing as well as design of experiment., • Knowledge of Six Sigma analysis and methods for process improvement and control., • Knowledge of incoming inspection and validation techniques, such as optical inspection and CMM., • Basic knowledge of the requirements of an ERP system for product specifications and bills of materials and routings., • Understanding of FEA application and able to create representative simulations., • Opto-mechanical design and/or integration experience. Supervisory Responsibilities: None. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Javlyn Process Systems a member of Krones Process Group North America is seeking a skilled Electrical Controls Engineer to develop, design, and implement electrical and automation systems for liquid processing facilities. The ideal candidate will have a strong background in industrial control systems, electrical schematics, and process automation specific to fluid handling systems. Javlyn Process Systems is a process engineering and control system integration company employing degreed Computer, Electrical, Chemical, and Mechanical engineers. Our focus is on providing automated process system solutions for the food, beverage, dairy, and pharmaceutical industries. We fulfill a niche within these industries by offering custom solutions and professional services to design and operate manufacturing facilities under optimal conditions. We are a subsidiary of Krones AG, an international firm with over 20,000 employees worldwide. Key Responsibilities: • Electrical Design & Documentation, • Develop detailed electrical design packages including control panel layouts, wiring, • diagrams/schematics and I/O lists., • Develop Motor Control Center designs and layouts., • Select and specify electrical components (PLC I/O, Safety Equipment, VFDs, Enclosures,, • etc.) suitable for liquid processing environments., • Ensure compliance with industry standards., • Process Integration, • Collaborate with process engineers to integrate control systems with pumps, valves and field instrumentation that measure temperatures, flows, pressures, levels, etc., • Project Execution & Support, • Participate in cost estimating., • Lead electrical checkout efforts at control panel fabrication shops., • 5 to 15 years of experience in electrical and automation design, preferably in the liquid processing industry (e.g., dairy, food, brewing, chemical, etc)., • Experience designing control systems with PLC’s, • Proficiency with AutoCAD and/or AutoCAD Electrical., • Proficiency with Microsoft Word and Excel., • Knowledge of applicable electrical codes and standards., • Degree or diploma in Electrical Engineering, Automation, or related field., • Familiarity with process instrumentation., • Combination of office-based design work and field/site visits. Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility.

Job Description At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges … and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well. About the Role: The Controls Engineer position blends strong controls engineering expertise with hands-on manufacturing engineering to improve automation, equipment reliability, and production efficiency. This role requires deep technical knowledge of PLC programming, CNC programming and setup, robotics, and industrial automation systems combined with a strategic mindset for driving continuous improvement and digital manufacturing initiatives. The Controls Engineer will play a critical role in designing, integrating, troubleshooting, and optimizing automated manufacturing systems across molding, machining, assembly, and secondary operations. This individual will partner with Operations, Maintenance, Quality, and IT teams to implement robust control systems, modernize equipment connectivity, and support the plant’s Industry 4.0 and automation roadmap. This role is ideal for someone who thrives at the intersection of controls engineering, manufacturing process development, and continuous improvement. What You’ll Be Doing: • Design, program, and maintain PLC-based control systems for automated manufacturing equipment, assembly cells, robotics, and material handling systems, • Support CNC programming, setup, and process optimization for machining operations to improve cycle times, repeatability, and product quality, • Lead automation integration projects, including robotics, vision systems, automated inspection, and secondary operations, • Troubleshoot and resolve equipment controls issues across production lines to minimize downtime and improve equipment reliability, • Develop and standardize control architectures, electrical schematics, and automation documentation, • Collaborate with maintenance and operations teams to support equipment upgrades, retrofits, and preventative maintenance strategies, • Integrate machines and automation systems with plant data systems, machine monitoring platforms, and digital manufacturing tools, • Partner with cross-functional teams to support new product launches, equipment installations, and process validation, • Implement data collection and automation technologies that improve production visibility, traceability, and decision-making, • Support the development of standard operating procedures, control logic documentation, and training materials for automated systems, • Evaluate and implement automation and robotics opportunities to improve safety, throughput, and cost competitiveness, • Work with external automation vendors, integrators, and OEMs to deliver reliable and scalable automation solutions Why This Role Matters This position is instrumental in advancing the plant’s automation capabilities and supporting the transition toward connected, data-driven manufacturing systems. By combining deep technical controls knowledge with manufacturing engineering expertise, this role will help drive improvements in safety, equipment reliability, throughput, and overall operational excellence. We would love to hear from you if: • Bachelor’s degree in Electrical Engineering, Controls Engineering, Mechanical Engineering, or Manufacturing Engineering, • 5+ years of experience in industrial automation, controls engineering, or manufacturing engineering, • Strong experience with PLC programming (Allen-Bradley, Siemens, or similar platforms), • Experience programming or supporting CNC machines (Mastercam, NX, Fanuc, Haas, or similar), • Hands-on experience with industrial robotics, motion control, and automation systems, • Knowledge of industrial networking and communication protocols (Ethernet/IP, Profinet, Modbus, OPC), • Experience with electrical schematics, control panel design, and troubleshooting electrical systems, • Familiarity with machine vision systems, sensors, and automated inspection technologies, • Experience integrating equipment with MES, SCADA, or machine monitoring systems, • Strong problem-solving ability with a hands-on approach to manufacturing challenges, • Excellent communication skills and ability to collaborate across engineering, operations, and maintenance teams Preferred Experience: • Experience in plastic injection molding, machining, or high-volume automated manufacturing Century Mold offers a competitive salary and a comprehensive benefits package that includes annual bonus, paid vacation and holidays, 401(k) matching, HSA contributions, and medical, dental and vision plans. Century Mold is an equal opportunity employer and affords equal consideration to all qualified applicants for all positions without regard to race, color, creed, religion, ancestry, citizenship, national origin, age, gender, sexual orientation and gender identity, disability, marital status, military or veteran status, predisposing genetic characteristics, domestic violence victim status, or any other status protected under local, state, or federal laws. Century Mold offers reasonable accommodation in the employment process for individuals with disabilities. If you need assistance in the application process to accommodate a disability, you may request accommodation at any time by contacting the Human Resources Department.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 7 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance, • EAP (Employee Assistance Program) The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job DescriptionDescription: Technical Manager-HV Substations Lead the delivery of high-impact HV substation engineering that powers the future of energy. As the Technical Manager-HV Substations, you will serve as Fisher’s senior technical authority for HV substation design and engineering, including transmission interconnections, collector switchyards, POI substations, and generator tie systems for renewable and conventional energy clients. In this role, you’ll provide leadership across substation physical design, electrical systems, grounding, protection & controls, and system study coordination, ensuring quality, QA/QC, and compliance at every phase. You’ll mentor engineering staff, partner with Project Managers, support proposals, and shape technical standards and best practices across the firm. Projects span 30%, 60%, and IFC design through construction and commissioning, giving you full end-to-end influence on critical infrastructure. If you’re ready to lead complex HV substation engineering projects, elevate technical teams, and drive grid reliability across renewable and utility-scale energy, apply today and join Fisher Associates. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Technical Manager-HV Substations • Lead HV substation engineering (69 kV–345 kV+) for transmission, interconnection, and utility projects, • Serve as senior technical authority for HV substation design and engineering, • Oversee QA/QC for drawings, calculations, studies, and IFC packages, • Design and review substation layouts, electrical schematics, grounding, conduit routing, lightning protection, and P&C interfaces, • Perform and review power system studies including load flow, short circuit, grounding, protection coordination, arc flash, insulation coordination, voltage drop, and ampacity, • Ensure compliance with NEC, NESC, IEEE, ANSI, NFPA, NERC, utility standards, and permitting requirements, • Interface with utilities and ISOs on interconnection requirements, SCADA/telecom integration, protection philosophies, energization, and commissioning, • Mentor and train engineers and designers, ensuring technical accuracy and quality deliverables, • Support proposal development with scopes, assumptions, and cost estimates, • Support construction and field engineering, including site visits and as-built documentation, • Bachelor’s degree in Electrical or Mechanical Engineering, • 15+ years of substation engineering design experience, • Active Professional Engineer (PE) license required, • Experience with renewable power plants, EPC projects, and utility-scale infrastructure preferred, • Strong background in renewable interconnection, transmission, and utility coordination, • Expertise in power system studies, including short circuit, load flow, grounding, protection coordination, arc flash, cable sizing/ampacity, trenching/cabling, equipment sizing, and lightning/lighting studies, • Ability to develop and interpret SLDs, 3-line diagrams, wiring diagrams, schematics, and substation layouts, • Proficient in AutoCAD, Civil 3D, ETAP, SKM, CYMCAP, • Strong knowledge of IEEE, NESC, NEC, NFPA, ANSI, NERC, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Remote

Electrical Engineer (RF) ( Rochester, NY ) - 32847. As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, digital, assembly, SMT and test related. Ability to design and conduct engineering experiments and act upon test re

Job Title: Salesforce Project Manager.Location: NY/NJ (Hybrid – 3 days/week).Seeking a Senior Project Manager to lead Salesforce B2B delivery projects, managing end-to-end execution, stakeholders, and cross-functional teams.Manage multiple Salesforce projects (scope, timeline, budget).Drive projec

Job Title: Senior Specialist, Electrical Engineer – FPGA Modem Development Job Code: 33182 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: L3harris is seeking signal proc

Navy's nuclear-powered submarine fleet! As a national asset, NNL provides employees with excellent pay and benefits as well as excellent work-life balance and employment stability! #ElectricalEngineer Required Combination of Knowledge and Skill Bachelors degree from an accredited college or universi

Job Title: Specialist, Electrical Engineer Job Code: 33769 Job Location: Rochester, NY Schedule: 9/80- employees work 9 out of every 14 days- totaling 80 hours worked- and have every other Friday off Job Description: The electrical engineering team is responsible for architecting, designing, de

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in Electrical or Computer Engineering and a minimum of 4 years of relevant experience; or Masters degree from an accredited college or university in Electrical or Computer Engineering and a minimum

Job Title: Senior Specialist, Electrical Engineer Job Code: 34250 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: This position will be responsible for providing Electrical Engineering systems support and development to customer-funded programs within our Exquisite Imaging

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

Job Title: Senior Specialist, Electrical Engineer (RF Design) Job Code: 33481 Job Location: Rochester, NY Job Schedule: 5/8: Employees work 8 hours per day, 5 days a week Job Description: As a member of the Product Support Engineering team you will be tasked with investigating a variety of pro

The successful candidate will be responsible for: • Working with a team to maintain OpenShift clusters on premises and in the cloud • Designing and extending CI/CD pipelines that embody DevSecOps best practices, from automated testing to continuous compliance • Lead modernization of legacy ser

Perform circuit and system design by manufacturing prototypes and integrating system hardware and software and performing qualification testing Procure equipment to support verification and validation of design and analysis efforts Team with other engineers to ensure integration of activities and pl

RPCO engineers are engaged during nuclear work and operations and are expected to apply sound engineering principles and judgement to influence and provide feedback to on-site management and partner organizations. The Laboratory assignment is intended to give the candidate experience in NNL's fleet

Primary interface with all stakeholders including internal and external customers, project engineering, executive management, subcontractors, and vendors. We rely on the dedication and innovation of our nearly 8000 engineers, scientists, technicians, and support personnel. Coordinates efforts of man

Preferred Skills PMP Certification Primavera P6 Experience Familiar with Construction Work Scopes Familiar with Engineering Concepts Compensation and Benefits Health, Dental, Vision & Voluntary Benefits Disability, Life & Accident Insurance 401(k) Savings program & Capital Accumulation Plan Personal

Required Combination of Knowledge and Skill Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering o

National Church Residences - - Responsibilities: Perform routine inspections, preventive maintenance, and necessary repairs; Diagnose and repair HVAC, plumbing, electrical, and mechanical system issues; Maintain interior and exterior common areas, ensuring safety and cleanliness; Complete minor car

Nesco Resource - - Responsibilities: Maintain and repair equipment, pumps, and motors; Assist with pipe installations; Assist with electrical installations; Perform routine maintenance; Troubleshoot equipment.

Job Title: Associate, Integration & Test Engineer Job Code: 26533 Job Location: Rochester, NY Job Description: - Support the set-up, configuration, and documentation of hardware and software systems under test, including loading software onto multiple devices - Support design, developmen

Aerotek - - Responsibilities: Perform routine and preventative maintenance of compressors, manufacturing equipment, and general building systems; Troubleshoot and repair production and molding equipment; Work closely with machine operators to ensure equipment is producing the correct product qualit