Trabajos electrical sales en Jersey City, New Jersey - Page 3Crear alertas

Job Description The Service Technician is accountable for troubleshooting malfunctioning or disabled automated, anti-vehicular barrier and bollard equipment to determine root cause of malfunction or failure and taken appropriate action to return the equipment to operational condition. The Service Technician is accountable for performing preventative maintenance procedures on same equipment as detailed by the original equipment manufacturer. The Service Technician is accountable for providing oversight of equipment installations and commissioning same equipment for proper initial customer utilization Essential Accountabilities: • Troubleshoot to root cause and repair customer’s barrier, gate and bollard equipment to ensure product performs as intended on a reliable basis utilizing only approved replacement parts, • Perform detailed and comprehensive preventative maintenance procedures on customer’s barrier, gate and bollard equipment as recommended by original equipment manufacturers, • Complete all preventative maintenance checklists, service tickets and time sheets completely and accurately; forward to office, administrative staff within 24 hours of performance of work, • Provide detailed estimates of required repairs when requested by customer representative to facilitate expense approval process, • Provide comprehensive and detailed assessment to Service Manager and Sales Manager of equipment that has reached end of life and should be replaced; provide similar feedback to customer representatives and notate on service tickets, • Oversight of an equipment installation ensuring all requirements of drawings and specifications have been met and/or satisfied, • Receive and Respond to Requests Equipment Maintenance and Repair, • Arrive at Service Office every day in preparation for day’s assignment unless directed otherwise, • Turn-in previous days paperwork including service tickets, timesheets and parts request forms and replace components, • Engage Service Manager, Service Coordinator or Lead Technician for review of day’s service call-outs and scheduled PMs, • Advise leadership of any gaps in capabilities due to parts or equipment required for specific call-outs or PMs, • Ensure assignments include point-of-contact, POC, for given facility, • Load up service vehicle with any required parts or resources not already on hand in service vehicle, • Proceed to customer site, • On call requirement for emergency repairs (rotation schedule is set up between the technicians for emergency repairs that are requested on weekdays after regular schedule hours and/or during weekends), • Initiate Customer Engagement, • Upon arrival on site ensure adequate, legal parking is provided or advise customer and office of inadequate parking, • Make initial contact with provided POC or their agent, • Confirm nature of service call, equipment detailed in call-out and working restrictions/times with POC, • Proceed to equipment site(s), • Execute Service or Repair Procedures, • Assess equipment behavior for repair needs or prepare fresh copy of PM checklist, • Effect repairs or perform preventative maintenance procedures, • Fill out PM checklists as procedures are executed, • Review all basic equipment functions to ensure equipment is returned to customer control in proper working order, • Make list of additional needs if required parts or tools/resources are not available and second call is required, • Complete Paperwork and re-engage POC, • Complete service ticket and/or ensure PM checklists are properly completed, • Review executed activities via paperwork with POC, • Gain POC signature on Service Ticket and legible printout of POC name, • Leave copy with POC or advise POC when copy will be forwarded, • Provide Oversight and Commissioning at a New Equipment Installation, • Ensure third party partners, suppliers or contractors have installed equipment per drawings and specifications., • Identify and communicate in installation details that are not per same drawings and specifications to third parties and leadership staff, • Commission new equipment installation via verification of all system functionality and designed and specified via site specific sequencing and execution parameters, • Report any details of functionality that does not conform to site specific requirements to Engineering and Leadership personnel, • Validate corrective action rectifies shortfall previously communicated Key Performance Parameters and Metrics: • Execute service calls in timely manner in line with existing labor standards, • Turn in all paperwork within 24 hours of performance of work without exception, • Advise Service Leadership of possible improvements to products, processes or work procedures, • Provide feedback to Service and Sales Leadership of possible equipment replacements, • Installation oversight effectively guarantees conformance to all drawings and specifications, • Equipment commissioning demonstrates comprehensive equipment conformance to intended sequencing, • Required Knowledge, Skills, and Abilities:, • Must be able to troubleshoot and repair hydraulic and electromechanical equipment including electric and electronic controls, • Must have baseline understand of electrical principals such as Ohm’s Law and how motors function, • Must have baseline understanding hydraulic principals such as force multiplication, pressure, volume and cavitation, as well as, how pumps, valves and accumulators function, • Must understand basic operating principals of programmable logic controllers and variable frequency drives; must be able to revise functional parameters of variable frequency drives, • Must have basic understanding of how vehicle detection loops function and how to troubleshoot loop/loop detector failures, • Must have good verbal skills and be able to interface directly with customers to explain basic equipment function, repair and maintenance procedures and a sequence of operation, • Must have good written communication skills to complete necessary paperwork for business execution including timesheets, service tickets and parts request forms; handwriting must be legible, • Must be able to utilize basic computer and tablet software for equipment interfacing and paperwork in lieu of hand written pieces, • Must be able to lift 50 lbs. or more repeatedly, • High School Diploma, • Minimum 3-5 years field service experience in electrical, hydraulic or mechanical machine repair, • Computer training preferred, • Electrical training/PLC/VFD training preferred, • Previous experience reading and interpreting civil and electrical drawings to confirm proper conformance Traits/Competencies required • Good Communication Skills, • Self-motivated and able to manage time, • Attention to detail, • Troubleshooting skills/fault isolation and identification, • Moderate Electrical Aptitude, • Moderate Mechanical Aptitude, • Moderate Hydraulic Aptitude, • Basic Civil Engineering Aptitude, • Competency reading basic civil and electrical drawings and validating conformance Job Location Kearny, NJ

Job Description Chelsea Lighting is seeking a highly qualified and dedicated Specification Sales Associate to drive the specification of our lighting products with architects, lighting designers, building engineers and interior designers. You will play a key role in positioning our brand as the preferred choice for innovative, energy-efficient, and design-forward lighting solutions. Additionally, you will act as the primary point of contact for value engineering, leveraging our product portfolio to deliver cost-effective solutions while maintaining design intent and compliance with project specifications. Qualifications: • Proven track record in lighting, electrical, or building services specification sales or similar, • Strong knowledge of lighting design principles, controls, energy efficiency, and compliance standards, • Excellent communication, presentation, and interpersonal skills, • Ability to explain technical lighting solutions in clear, customer-focused terms, • Self-motivated with strong organizational and project management abilities, • Proficiency with CRM systems and project tracking tools (i.e. wired contact) Job Responsibilities:, • Build and maintain strong relationships with architects, lighting designers, building engineers and interior designers to ensure Chelsea is specified on projects., • Serve as the lighting designer for internal projects, with responsibilities including, but not limited to, the following:, • Create lighting layouts and fixture schedules, • Provide cost-effective solutions that achieve the required aesthetics and lighting performance for the project., • Deliver engaging presentations on Chelsea’s value propositions to include but not limited to “the Chelsea way”, lighting design consultations, product demonstrations, and value engineering opportunities., • Provide technical expertise on lighting controls, energy efficiency, sustainability, and regulatory compliance (i.e. WELL, LEED, Part L)., • Track and manage projects from concept design through bid award., • Assist Chelsea’s project management team in offering alternative options., • Collaborate closely with internal sales, marketing, preconstruction and project management to develop winning strategies., • Attend industry events and trade shows to build brand awareness and expand your professional network., • Monitor competitor activity and market trends to identify opportunities for growth., • Prepare and deliver accurate reporting on specifications, pipelines, and sales forecasts (i.e. must win list). Chelsea Lighting NYC Holdings is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, genetic information, or any other characteristic protected by law.

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job Description Overview Pay: $20 per hour + commission Earning potential: $20 – $30 per hour on average with commission Schedule: Weekdays and weekend availability Location: Store(s) will be assigned based on commutable distance. Must be available to work in multiple assigned retail stores within designated territory. Part-time and full-time opportunities available A.J. Perri Plumbing, Heating, and Cooling is the nation’s largest provider of residential HVAC, plumbing, and electrical services, with more than 7,000 professionals and over 45 years of experience helping homeowners improve comfort, efficiency, and reliability in their homes. We are hiring Retail Sales Promoters to work inside national home improvement retail stores promoting HVAC services, system tune-ups, system replacements, and indoor air quality solutions. This is a great opportunity for individuals who enjoy speaking with people and want to earn hourly pay plus commission while introducing homeowners to professional HVAC services and consultations. What We Offer: • Weekly pay via direct deposit, • Uncapped Commission paid on top of hourly rate, • Paid training, • Career path into HVAC Sales Advisor roles, • Insurance available after 31 days, • Low-cost medical (as low as $5/week), • Dental, vision, HSA/FSA, • 401(k) with company match, • Paid time off + holiday pay, • Company-paid life insurance Responsibilities As an In-Store Sales Representative and Lead Generator, you will engage with retail shoppers and introduce them to A.J. Perri heating and air conditioning services. This role supports lead-generation, brand-awareness, and customer education while scheduling in‑home consultations or HVAC services. • Act as a retail Brand-Ambassador, representing ARS with professionalism and enthusiasm., • Serve as a Promotions Specialist explaining service options, system upgrades, and comfort improvements, • Function as a Lead-Generator and Appointment Setter, scheduling in‑home consultation and tune ups with service technicians and comfort advisors, • Note: this role is not door-to-door, does not canvass, and does not function as a canvasser Qualifications What You Need • Positive and energetic personality with strong people skills, • Comfortable approaching and speaking with customers in a retail environment, acting as a product-consultant and support lead-generation efforts, • Retail, kiosk, Door-to-Door, or sales experience preferred (not required), • Ability to stand and walk during shifts, • Weekend and some holiday availability, • Reliable transportation, • Clean, professional appearance representing the ARS brand, • Ability to attend weekly in-office meetings *This posting provides details on potential compensation ranges and possibilities. These amounts are not guaranteed and should in no way be construed as an offer. *Sign-On Bonuses only available for roles that have them advertised; amounts are depending on experience and will be paid out according to an offer letter addendum. American Residential Services is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or other protected characteristics. For more information about how we collect and use personal information, see our privacy policy here: .

Job Description Who We Are OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. What You Will Do Are you an experienced Field Service Technician? Do you have experience working with EV chargers or Petroleum Equipment? If so, apply to be a part of the OWL team today! What We Offer You! • Competitive Compensation Package including benefits eligible on day one of employment., • Weekly Pay!, • 8 Paid National Holidays and 2 floating holidays to use at your discretion for a total of 10 per year!, • Travel per diem for traveling positions., • Flexible Paid Time Off, • 401(k) with Company Match up to 4%!, • Health, Dental, and Vision Insurance – Eligible on day one of employment!, • Health Savings Account (HSA) and Flexible Spending Account (FSA) to support you and your dependent’s medical expenses., • Disability & Occupational Accident Insurance, • Company-Paid Life Insurance Policy, • Employee Assistance Program (EAP) Perform EV Charging and/or Petroleum service and installation calls in a professional, timely, and quality manner. • Complete job paperwork for each service call, at the time of service., • Complete training courses in a timely manner to maintain current certifications and equipment knowledge., • Act as a resource for customers; aid and product support to maintain long term relationships., • Juggle multiple tasks in a fast-paced ever-changing work environment., • Communicate skillfully and effectively in person or over the phone., • High School Diploma or GED, • Positive Attitude, • Attention to Detail, • Preferred electrical experience, • Proficient in Microsoft Office Suite, • Written and verbal communication skills, • Willingness to work in all varied weather conditions., • Willingness to travel with the possibility of overnight jobs., • Experience with Point-of-Sale installation and repair is a plus., • Experience working with EV chargers is a plus., • Experience working with Verifone is a plus., • Experience in computer networking is a plus., • Experience with Wayne or Gilbarco dispensers is a plus., • Experience with Petroleum equipment is a plus., • Clean driving record and the ability to work safely required., • Capable of lifting and caring equipment weighing up to 75 lbs.

Job Description Aftermarket Sales Engineer / Aftermarket Sales Representative / Aftermarket Sales required to join a leading provider of commercial and industrial heating solutions. Specializing in boilers, controls, pumps, and integrated heating systems, the company delivers high-performance solutions to the New York metropolitan market. The successful Aftermarket Sales Engineer / Aftermarket Sales Representative / Aftermarket Sales will act as the technical bridge between our field technicians and our clients, turning on-site challenges into comprehensive service upgrades and repair contracts. The ideal Aftermarket Sales Engineer / Aftermarket Sales Representative / Aftermarket Sales will possess the ability to effectively communicate with industrial clients, contractors, engineers, and internal teams. They will be capable of independently performing tasks both in an office setting and on-site, ensuring the efficient integration of service solutions and project execution. Package & Location: • Up to $80k + uncapped commission, • Medical, Dental, Vision, L/S Term Disability, Life Insurance, • Generous Paid Time Off (PTO) program + 401(k) retirement plan, • Assess field service opportunities and develop tailored mechanical and electrical service solutions. Must be proficient in reading mechanical schematics and electrical diagrams to provide accurate repair and upgrade estimates., • Collaborate with field technicians and boiler cleaning teams to quickly generate manufacturer-approved quotes during on-site visits., • Manage extended sales cycles by emphasizing the Total Cost of Ownership, helping clients grasp the long-term benefits of premium service offerings., • Seek out new business opportunities while maintaining relationships with existing clients, including negotiating intricate service contracts and ongoing maintenance agreements., • Oversee the full project lifecycle from initial lead reception to placing orders with suppliers, working closely with the Service Scheduling team to ensure smooth execution., • A BS in Engineering or Engineering Technology is required., • At least 2 years of experience in industrial technical sales, with a preference for background in boiler systems or aftermarket industrial products., • Strong ability to read and interpret mechanical and electrical schematics, as well as technical specifications., • Proficient in CRM software (HubSpot preferred) and MS Office (Excel/Word)., • Experience in industrial estimating, billing, and safeguarding profit margins., • A customer-focused problem solver with excellent time-management skills and the ability to work independently.

Job Description Overview and Summary: Journeyperson Porters have the skills to perform the work of a handyperson in making repairs within apartments and common areas of buildings. The Journeyperson Porter shall be responsible to fulfill the job description of both a Porter and a Journeyperson Porter, which includes being able to frequently move materials and supplies to and within a building, using both hands and in weights often up to 50 pounds. Journeyperson Porters will work at any location as required by the employer, depending on business necessity. When assigned to any location, Journeyperson Porters are directly responsible for repair and upkeep of interior and exterior common areas of buildings and tenants’ apartments. Journeyperson Porters are to think of the locations as machines. Journeyperson Porters will maintain the cleanliness of the exterior and interior common areas of the buildings, which includes, but is not limited to garbage removal and shoveling of snow. Journeyperson Porters properly completes all assigned work orders. They observe and report items that need repair, prioritize repairs so most important items are repaired immediately; advise superintendent about emergencies or jobs they cannot complete; assists superintendent to complete repairs, or in any situation with which superintendent requests assistance. Journeyperson Porters will complete all repairs in a professional manner, follow proper procedures to order needed supplies, tools, and equipment, and complete necessary paperwork to order and receive supplies and equipment; receives all authorizations as necessary. Quantity of work as reflected by number of work orders must meet management standards; quality of work must meet management standards, as well as City, State, and Federal requirements. Journeyperson Porters must attend all regular meetings to discuss work to be performed and the appearance of the buildings. Reports to: Directly reports to the Facility Director and Maintenance Supervisor; also follows instructions and directives from other management personnel, including Superintendents, Property Managers, and the Executive Director. Journeyperson Porter Essential Job Duties: • Reporting to work as scheduled: Report to the site at the designated meeting area each day prior to starting the day's work., • Plumbing: Make repairs as needed on all exposed plumbing including, but not limited to, the following: stop leaks, clamp and/or plug pipes; faucet repairs; waste lines; stoppages; toilet tanks; flushometers; pop‐up stoppers; standing waste mechanisms; replacement of shower bodies and related work., • Radiators: Make repairs to radiators including, but not limited to, the following: shut‐ off valves, control valves; air valves; stem packing; related work., • Electric Equipment: Repair or replace electrical equipment, including fuses and/or circuit breakers; smoke detectors; intercom panels and stations., • Glass Panes: Measure and replace pre‐cut glass panes in doors and windows., • Perform carpentry work including, but not limited to, the following: window sashes; door frames; molding; re‐hang doors; cabinet installation; floor patches; related work. install, adjust, and replace door checks, springs, and hinges., • Walls: Make repairs to walls, including, but not limited to, the following: patch plastering, replace wall and bathroom tile; drywall, re‐caulk tubs and sinks; related work., • Painting and Finishing: Perform painting and finishing work including, but not limited to, the following: painting of interior walls, ceilings, and trim; painting of exterior trim and metalwork. Painting of units and common areas, including walls, ceilings and trim and staining and finishing woodwork., • Apartment Make‐Ready: All demolition, carpentry, plumbing, electrical, finishes and cabinetry repairs/replacements., • Gas Ranges: Adjust and/or replace stove parts as needed, not including gas supply lines., • Concrete: Make minor concrete repairs., • Damage Protection: Shut necessary valves to prevent severe water damage to the building., • Light Fixtures: Ensure that all interior and light fixtures are in proper working order., • Boiler/Boiler Room: Maintain boiler room including, but not limited to, the following: keep boiler room clean and orderly; flush low‐water cut‐off and/or water feeds as needed; clean water and sight glasses; maintain water level: drain and refill water as needed; clean strained cups as needed; clean nozzles as needed; oil motors and pump as needed; flush and/or clean mud rings and valves as needed; fill oil burner lubrication tank as needed; keep covers on all oil burner controls as needed; remove ashes from ash pit as needed; remove ashes from basement if necessary; inform site superintendent and/or utility company of gas leaks, gas smells, or other hazardous conditions., • Work Identification: Report necessary work to be performed by outside mechanics or contractors., • Work Orders: Ensure that all work orders are completely filled out before work begins, and must also ensure that all time spent on each job is properly recorded and logged, and tenant sign‐off is secured on all completed work orders. Secure all supplies needed from supply room and note all supplies used to complete each work order on that work order. Ensure that supplies taken from supply room are replenished from supply truck based on supply listings noted on completed work orders., • Unauthorized Work for Tenants: Handymen are prohibited from performing work for tenants for compensation during their regular work hours., • Sign Out: Report to designated meeting to clock out and end shift. Return all work orders to the site superintendent. For those work orders which were either inspected and found to be beyond the capabilities of the handyman, or for those for which supplies have been ordered for the following day, a notation should also be made of the next appointment, or a notation that the next appointment should be set by the site superintendent as and when supplies have been received. In either case, the handyman shall not hold copies of work orders beyond the close of the day's work., • Report to the Manager/Facility Director or site superintendent on the following:, • Building damages as observed during inspections., • Tenant vandalism, rowdiness, and complaints., • Accidents observed., • Non‐tenant gatherings and suspicious activities; such as drug use and sales;, • Vacancies observed; tenants moving out with belongings, moving vans, etc.;, • Process servers from any local, state, or federal authority;, • Vendor/service contractors seeking access;, • Unauthorized people or activities., • Other Repairs: Make other repairs as needed or requested, including, but not limited to the following: install window locks/window guards; repair or replace sash weights and chains; patch vinyl flooring; install and/or repair doorknobs, locks and cylinders; install appliances; make minor roof patches; related work. Other Responsibilities as required: In addition to the above‐stated duties, the handyperson may be called upon to perform repairs with the superintendent, with in‐house construction crews, or to work with porter to maintain or clean the building to ensure that the building(s) and apartments are at all times maintained up to or exceeding required management’s standards. When required, Handypersons will be required to travel to different assigned buildings to perform essential duties as needed. Handypersons will be required to complete other functions when necessary and required by management. Please refer to the job description of Porters for more essential duties of a Journeyperson Porter. Essential Requirements: Qualifications, Skills, and Education: 1. Must have a minimum of 3 years of experience as a Journeyperson Porter., 2. Must be able to verbally communicate, read and write English, Bilingual preferred., 3. Must have a FDNY Certificate of Fitness for sprinklers (where applicable). Candidates lacking the credentials must acquire certification within 6 months of employment. 4. Must have a High School Diploma/equivalent. Candidates lacking the credentials should have a minimum of 5 years of Journeyperson Porter experience. 5. Must have the skills required to perform any and all other maintenance personnel functions.

Job Description Culinary Depot is looking for a hands-on, experienced Project Manager to lead commercial kitchen installation projects from start to finish. You’ll take full ownership — from contract signing through completion — ensuring every phase runs smoothly, on time, and on budget. We’re looking for someone who’s not just organized and driven, but also a creative problem solver who can think on their feet and keep projects moving forward. What You’ll Do * Manage commercial kitchen installation projects from contract to closeout. * Coordinate with general contractors, architects, owners, and subcontractors to meet project goals. * Oversee installation crews and ensure all work meets safety, quality, and timeline standards. * Take field measurements, manage submittals, and coordinate FDNY inspections. * Schedule equipment production, deliveries, and start-ups. * Partner with Operations and Sales to ensure seamless project execution. * Proactively identify issues and develop smart, effective solutions. * Review drawings and specifications to confirm accuracy and compliance. What You Bring * 3+ years of experience in commercial construction project management. * Strong understanding of plumbing, HVAC, and electrical systems in commercial kitchens. * Proven ability to read and interpret construction drawings and specifications. * Excellent leadership, communication, and team management skills. * Highly organized, proactive, and adaptable — able to balance multiple projects at once. * A creative problem solver who can anticipate challenges and think outside the box. * Experience with Procore, Outlook, and drawing review tools preferred. Who We Are & Benefits Culinary Depot is a leading provider of commercial kitchen equipment, design, and installation solutions. For over 25 years, we’ve helped restaurants, catering facilities, and large-scale food operations bring their visions to life. We value precision, teamwork, and innovative thinking, and we’re committed to delivering exceptional results for every project. Benefits * Competitive salary * Health, dental, and vision insurance * 401(k) with company match * Paid time off and holidays * Opportunities for professional growth and training * Supportive, collaborative work environment Powered by JazzHR NJOd57PVms

Job Description Hours: 9am-7pm, In office 5 days a week Job Description: • Office Maintenance: Conduct regular inspections of office spaces, lighting, and plumbing, and perform minor repairs on walls, doors, ceilings, and flooring., • General Repairs: Fix leaky faucets and sinks; replace light bulbs; repair furniture; and manage minor HVAC issues., • Office Support: Assemble, install, and move office furniture, desk, tables, and whiteboards., • Preventative Maintenance: Perform routine maintenance tasks on appliances (microwaves, coffee makers), furniture (tables, desks) and facility systems to prevent equipment failure., • Technical Skills: General knowledge of painting, electrical, HVAC and routine office maintenance/cleaning., • Tool Proficiency: Ability to safely use common hand and power tools, cleaning supplies., • Problem-Solving: Ability to diagnose, troubleshoot, and resolve issues efficiently., • Physical Stamina: Capable of lifting, bending, and standing for extended periods., • Communication: Strong interpersonal skills for interacting with employees and management. Positive attitude required., • This is a physically demanding role requiring daily on-site presence, often in a fast-paced office environment., • May require flexible hours to perform work after hours to minimize office disruption. At Wolfe Research we feel passionately about equal pay for equal work and pay transparency is an integral practice for that. The compensation for this role is market competitive with a base salary range of $60,000-$75,000. We intend to offer the selected candidate a base salary within this range, based on non-discriminatory factors including but not limited to skill set, job-related experience, and location. In addition, we offer an annual discretionary incentive bonus and competitive employee benefits including: medical, dental and vision coverage; life, accident and disability insurance. Wolfe also offers paid time off packages that include vacation, sick days/leave, paid holidays and paid parental leave. About Wolfe Wolfe Research, LLC is a premier independent sell-side research firm with a commitment to best-in-class content and ongoing strategic growth. We produce the most objective and distinguished research across our covered sectors, and deliver our services with intense care and specificity to each of our institutional clients. We strive for excellence in every facet of our business, and we will continue to differentiate ourselves by maintaining the highest standards for effort, client service, thoughtfulness, and integrity. Wolfe remains committed to providing a home for the top-ranked, most innovative and inspired analysts and sales people, and places significant emphasis and resources on mentoring talent. The firm has established a leading reputation for sector and macro research. Our QES product provides leading stock selection models, cutting edge portfolio analytics and hedging tools, highly ranked ESG product, and back-tested alternative data. Wolfe Research’s analysts were voted #6 for equity research during 2025 by institutional clients in the prestigious “Extel” (formerly Institutional Investor) All-America Research Poll, trailing only significantly larger bulge bracket firms, who have historically not been viewed as our peers. We strive for excellence in every facet of our business, and we will continue to differentiate ourselves by maintaining the highest standards for effort, client service, thoughtfulness, and integrity. Wolfe remains committed to providing a home for the top-ranked, most innovative and inspired analysts and sales people, and places significant emphasis and resources on mentoring talent. For more information about Wolfe Research, please visit us at: Wolfe Research recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity or sexual orientation, disability, age, citizenship or other characteristics. At Wolfe Research, we strive to be the place where a diverse mix of talented people want to come, to stay and do their best work. We pride ourselves on bringing integrity and objectiveness to our research process and we know our company’s biggest strength is the hard work, collaboration and diverse views and opinions of our passionate and creative employees. We are fully focused on equality and believe deeply that diversity of race, gender, sexual orientation, religion, ethnicity, national origin and all the other fascinating characteristics that make us different, also make us stronger.

Job DescriptionSenior Assistant Property ManagerThe Senior Assistant Property Manager will assist the Property Manager with achieving all on-site operations and financial objectives for the Class A office property. The Sr. Assistant Property Manager will conduct building walk throughs with vendors to ensure service level standards are met and the building meets city requirements as well as provides Class A service and quality to tenants. The Sr. Assistant Property Manager should be self-directed, highly professional, and have 5 years of previous commercial class A office property management experience.Responsibilities • Oversee all vendors and personnel working at the property and conduct regular meetings with building staff and contractors to maintain a high standard of performance in accordance with the terms of contracts., • Maintain procedures to properly administer all building purchase orders, correspondence and payroll administration., • Assist in preparation of bid packages, pre-bid walkthroughs, and contract negotiations., • Work closely with the Property Manager to increase income to the property., • Knowledgeable about all life safety systems and procedures., • Administer special projects that may be assigned by the Property Manager (i.e., Holiday Decorations, Tenant Relations Events, etc.), • Be familiar with the various mechanical systems (HVAC, electrical, plumbing, elevator, etc.) and the operating procedures for the building., • Oversee various capital projects, including tenant build-outs, as required., • Track building violations and open applications, ensuring that the proper steps are being taken to resolve issues., • Assist the leasing team in maximizing efforts to market the property to prospective tenants, including preparing vacant spaces and enhancing common areas and amenities., • Assist with overseeing the Associate and Tenant Service Coordinators, ensuring their work is accurate and completed on time., • Support the management of the union staff (L32BJ and L94), reporting issues to the Property Manager and, when appropriate, addressing matters directly., • Develop an understanding of Collective Bargaining Agreements to support payroll administration, paid time off policies, and the application of progressive discipline procedures., • Provide excellent tenant service. Respond to tenant request/problems in a timely and courteous manner and generate work orders directed to vendors or maintenance staff. Follow-up with tenants to ensure satisfactory resolution of any issues., • Have working knowledge of tenant leases; particularly with clauses affecting the operation of the building., • Interface with tenants in relation to performance of work in tenanted areas., • Assist in the coordination of tenant move-ins and move-outs., • Review, approve and properly code all invoices for the property., • Assist Property Manager in developing quarterly forecast and budget for the building., • Oversee the preparation of the monthly reports and provide SVP, Head of Property Management with a summary of operations, including leasing activity, accruals, variances to the budget, tenant issues and capital projects., • Provide A/R update on a monthly basis. Monitor and report on accounts receivables. Oversee collection efforts in accordance with company and management agreement policies., • Track, monitor, and analyze retail tenant sales trends., • Input all Capital Project Construction information into tracking forms and prepare documentation for tenant improvement allowance reimbursement.Education/Experience/Certifications, • Bachelor’s degree required, • 4-5 years of Property Management experience required, • PM, RPA, or LEED designation or in progressEssential Skills and Qualifications, • Self-motivated, creative and resourceful, • Strong knowledge of leases and building agreements, • Knowledgeable of cleaning and security operations as it relates to other building services, • Ability to both supervise and motivate building staff, • Proficient in Microsoft Office (i.e., Excel, Outlook, Power Point, Word), • Coordinate, manage and communicate efficiently and effectively, • Effective verbal and written communication skills, • Strong organizational skills and ability to remain composed and flexibleCompensation and Benefits, • $100,000 - $110,000/ year, • Excellent Benefits - medical, dental, vision,, • Excellent PTO and holiday schedule

Job DescriptionSalary: $120,000 - $150,000 New York Peace of Mind Technologies (POM), is currently searching for a qualified, enthusiastic, hard-working and driven Bid/Estimating Manager that embodies POMs core values to join our Company. About You You are driven and understand how to manage priorities, lead a team and coordinate effectively to meet deadlines. You are comfortable with numbers, technically skilled and have the ability to stay focused and maintain great attention to detail while under pressure. About Us Peace of Mind Technologies, LLC (POM) is New Yorks premier systems integrator for security and surveillance technology. Specializing in high-tech systems, cloud-based software services and audio/video solutions for thousands of businesses, schools and properties in the greater New York Metropolitan area, POMs diverse client roster comprises a wide range of prestigious and well-known organizations. Founded in 2002, POM has handled more than 2,000 site installations, primarily focused on large offices, retail, hospitality, health care, education, and real estate (commercial, luxury residential and hi-rise). Roles & Responsibilities The Bid and Estimating Manager will lead and manage the estimating team, overseeing standardized processes to ensure consistency and efficiency in estimates and proposals. Responsibilities include training and motivating the team, reporting weekly KPIs, responding to RFPs, collaborating with sales and project management to develop comprehensive proposals, and maintaining relationships with clients and vendors to enhance bid opportunities. * Leadership & Management * Lead and manage the estimating team, providing guidance, training, and performance evaluations. * Communicate effectively, providing clear direction to internal team, sub-contractors and vendors both verbally and in writing. * Oversee POMs standardized estimating processes and ensure consistency across all estimates and proposals. * Train and motivate team on an on-going basis * Develop goals for Estimating Department and report progress. * Prepare Annual performance reviews * Manage Estimating Department PTO calendar to ensure department is properly staffed. * Manage the quote calendar and prioritize accordingly to ensure Sales Team can meet RFP deadlines. * Provide Director of Sales weekly key performance indicators (KPIs) for department. * Accountable for team delivery of timely Estimates/Proposals, a key driver to company success. * Report Profitability and win percentage and recommend improvements to increase success rates. * Utilize Salesforce to track bid opportunities. * Estimating/Pre-Construction * Respond to request for proposals (RFPs) * Qualify opportunities. * Review prospects needs and wants for the product/services offered and work with the Senior Sales Engineer, System Engineers, and the Sales team to develop the right solution. * Attend site surveys for new projects and gather relevant site details in order to create the scope of work including equipment and labor estimate. * Prepare estimates for low-voltage systems including AV, security, access control, and surveillance systems. * Gather information to determine proper system components from internal and vendor resources. * Document equipment needed and labor time required for each project. * Work with vendors and manufacturers to develop bills of materials and proposals. * Level vendor quotes and negotiate costs to increase profit margins, as well as identify missing components in the scope of work to avoid additional project costs and reduced margins after the project is sold. * Provide accurate, timely and competitive project estimates/quotes to the sales team that support the detailed scopes of work outlined in Sales Proposals, RFIs, RFPs etc. * Review product estimate and system design prepared by other team members. Ensure there are no missing components in the scope of work to avoid additional project costs and reduced margins after the project is sold. * Create requests for information (RFIs) • Create and maintain a database of unit costs, assembly costs, and production rates in D-Tools. Proposal Development * Collaborate with the sales and project management teams to develop comprehensive project proposals. * Create pitch decks for RFPs and deals company is pursuing. * Work with Sales Director and President to price and strategize proposals and bids. * Prepare detailed cost breakdowns, project scopes, and schedules to accompany all proposals. * Create and complete proposals, ensuring proposals comply with company standards and client expectations. * Client Engagement * Build relationships with GC estimators to have the best shot at winning projects. * Meet with potential clients to discuss project requirements and specifications. * Provide technical support and clarification on estimates and proposals. * Foster relationships with clients to encourage repeat business and client referrals. * Maintain and grow bid relationships the estimating manager will maintain and grow relationships but not limited to contractors, manufactures, subcontractors, distributors and consultants. * Search for relevant publicly available RFPs, bid-opportunities and partnerships in various sectors. * Vendor & Subcontractor Management * Source and manage relationships with suppliers and subcontractors to ensure competitive pricing and quality work. * Obtain and evaluate supplier and subcontractor quotations. * Manage sub-contractor descoping meetings. * Continuous Improvement * Analyze project cost performance and implement improvements to the estimating process. • Identify department inefficiencies, develop new department processes and implement new policies., • Stay updated on industry trends, best practices, and new technologies in low-voltage AV/security systems. Project Hand-off * Hand-off projects to purchasing and operations at the internal kickoff meetings. * Work closely with project managers to ensure a smooth transition from estimating to project execution. Qualifications: * Bachelors degree in electrical engineering, Construction Management, or a related field (preferred but not required). * Minimum of 5 years experience in estimating within the low-voltage AV / security industry. * Proficient in estimation software such D-Tools * Strong understanding of low-voltage systems, including AV integration, security systems, and network infrastructure. * Excellent organizational, analytical, and numerical skills. * Strong leadership abilities and effective communication and negotiation skills. * Ability to read and understand blueprints, schematics, and technical specifications. Proven ability to meet deadlines and manage multiple projects simultaneously. • Prior field-based installation or project management experience is a plus. Does this sound like you? Benefits Include: • Annual salary commensurate with experience $120,000 - $150,000, • Health benefits package, • Voluntary dental, vision, disability and life insurance plans, • 401k plan with matching, • Company sponsored life insurance policy, • Pre-tax commuter benefit, • Generous paid-time-off policy Candidates must be authorized to work in the US. No agencies please. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.