Trabajos electrical testing en Plainview, New YorkCrear alertas

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Operations Supervisor, Operations Lead Personnel and in coordination of fellow Operations Personnel the incumbent will perform a variety of basic tasks relevant to the day-to-day operation of the wastewater treatment plant facilities, processes and equipment, including process and equipment rounds, recording operations data and information, making observations and reporting on variations in operating conditions, maintaining logs and other required reports and forms, and provides input for corrective actions and implements corrective actions as directed. Assist Operations in efforts to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Works a scheduled shift and will be subject to required emergency call in or shift coverage as Operational needs demand., • Under the direct Supervision of Shift Supervisor or Lead person may be required to perform some of the following tasks depending on the station assigned for that shift:, • Record and Read meters for (pumps, gauges, motors etc.…) in accordance with all regulatory requirements., • Record tank levels, sludge blanket levels., • Operate equipment pertinent to assigned workstation (GBT, BFP, overhead lifting jib crane, pumps), • Open, close and adjust valves for tanks & pumps., • Observe their process areas (pumps, motors, valves, sewage color, odor, flow) record their findings., • Collect samples for laboratory analysis., • Receive chemicals in bulk, drum and tote form., • Adjust / bleed pumps as directed., • Keep the workstation and surrounding area safe and clear of debris., • Inspect equipment for proper functionality and refer to Maintenance for any necessary repairs., • Maintain a logbook for the station they are operating., • Create work requests for equipment found to be malfunctioning or broken., • Make adjustments to equipment to optimize the operation (GBT & Dewatering)., • Troubleshoot operational issues and get approval of operations supervisor before executing. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Associate degree (or equivalent experience) in Environmental Science, Engineering, Biology/Laboratory or related fields preferred. Knowledge/Skills/Abilities: • Requires good reading, math, writing, and verbal communication skills., • Ability to read, and record data from meters, gauges, scales, panels, computer consoles, and other equipment., • Ability to understand/execute written and oral instructions, read/understand technical instructions., • Ability to interpret data and information from technical service manuals and drawings., • Knowledge of Windows, Google Workspace, MS Office Suite, and other computer-based systems., • Knowledge of basic laboratory sampling, testing and documentation., • Ability to adjust chemical feeds and processing equipment as directed to maintain compliance., • Basic knowledge of wastewater treatment equipment and processes., • Must have the ability to maintain effective working relations w/management, supervisors, and staff., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with little or no supervision., • Must have a general understanding of how the treatment plant works and the SPDES limits associated to the station being operated. Required Certification/Licenses/Training: • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Possesses valid NY State Class 1A Wastewater Treatment License is preferred or ability to attend classes required for obtaining valid NY State Wastewater Treatment license and obtain license within 24 months. Additional Information Pay Rate: $22.91 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Job description Nissan of Huntington is one of the region's top rated customer satisfaction dealerships, as well as being one of the largest Nissan stores on Long Island. Our team provides training courses and offers opportunities for advancement, which focuses to help you grow both personally and professionally. We are growing at the fastest rate of any Nissan dealer in the area and looking for the right people to grow with. What We're Looking For We are looking for A, B, C and Express Technicians to continue our growth and provide our customers with exceptional service. Build your career and develop your professional experience with our team. The ideal candidate will flourish in a fast-paced and professional workplace. Don't believe just my ad, come and talk to the techs in the shop! What We Offer • Highly productive shop ( techs collectively averaging over 60hrs each with some in the 80-90 range regularly), • Continued education and manufacturer training, • Clean and professional work environment, • Health insurance, • If you have accrued vacation time with your current store we will honor it from day one. No losing time with your family to come work with us. Responsibilities • Perform work specified on the repair order with efficiency and in accordance with dealership - familiarizing yourself with the service department & procedures, • Assist Service Advisor in test-driving vehicles, and testing components and systems. You will learn how to use diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc, • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs, • Executing repairs under warranty to manufacturer specifications Qualifications • Minimum of 1 year in service department, • Technical degree preferred, • ASE certifications preferred, • High School Diploma or GED, • Ability to identify the problem quickly, • Effective analytical and communication skills, • Good reading, computer, and mathematics skills, • Ability to learn new technology and repair and service procedures and specifications, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Basic Computer Skills, • Positive, friendly attitude Come and join the top Nissan team on Long Island. Do not waste your time with other dealers who treat you poorly. Don't put off the change any longer.

Job Description At AAMCO of Amityville, we have been serving our local community for over 35 years. As one of the top automotive centers in Long Island, we are looking for looking for an A or strong B General Repair Diagnostician/Tech who has the skillset to maintain a high level of service for our customers. This role includes very competitive pay, AAMCO training, and has room for advancement. The center is located on Sunrise Highway with easy access to LIRR and Long Island beaches. Position Responsibilities: • Inspect, diagnose and repair vehicle automotive systems, • Remove and Reinstall Transmission systems., • Assist other technicians in performing technical activities, • Explain problems discovered during vehicle inspection to service writers and technicians, • Continuously learn new technical information, equipment, tools and repair techniques, • Professionally record findings so that repairs costs are accurately estimatedWhat We Offer:, • Competitive compensation packages based upon experience (Up to $40/hr for the right candidate!), • Relocation assistance available for the right candidate., • Daytime work hours, No weekends, • Paid Time off, • Opportunity to advance to Shop Foreman with the right skillset, • Access to AAMCO’s proprietary training programs, seminars and skill presentations, • Live technician support hotline capable of troubleshooting any problem encountered in your center, • An AAMCO Career Path, a formal plan, designed to take you anywhere in the Automotive Industry. We offer a Career not just a Job., • Clean, safe environment, • Great team atmosphereJob Requirements:, • Minimum of 3+ years’ experience working as a General Automotive Technician, • Hold a valid driver’s license, • Own professional grade tools to service any general repair need, • Experience troubleshooting and conducting both mechanical and electrical diagnostics, including drivability testing, • Safe working knowledge of shop tools and equipment, • Existing knowledge of the removal and reinstallation of transmission systems is preferred, but not mandatory Powered by JazzHR rEcSoDgYur

Job DescriptionCompany Description Rallye BMW in Westbury, NY has immediate opportunities for technicians to become part of the BMW family! Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience.Qualifications, • About You, • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information All your information will be kept confidential according to EEO guidelines. Average technician salary in Westbury NY $65,000-$82000 #automotive #technician #mechanic #BMW #ASE ESTIND

Job DescriptionMaster Automotive Technician / Mechanic $5,000 signing bonus for qualified Technicians! Land Rover Huntington is looking for Master Automotive Technicians to join our Service team in Huntington, NY! Master Automotive Technician / Mechanic Qualifications: • Minimum 3 years working as a Master Automotive Technician, • Land Rover experience preferred, • Must have valid Driver's License, • CDK & Previous Automotive Dealership experience strongly preferred, • Must have good attendance and time management, • Must have a great work ethic & be willing to join a winning team!Master Automotive Technician / Mechanic Responsibilities:, • Visually inspect and document condition of vehicle based on customers’ requests or concerns, • Conduct initial diagnostic testing to identify specific issues impacting vehicles, • Perform more complex maintenance services on vehicles including (but not limited to) engine replacement, electrical work, transmission repair and more, • Document all services and repairs performed to provide to service advisors and/or customers, • Identify any additional recommendations for services and communicate with management, • Communicate with other service staff and/or customers if additional services are required and ensure information is documented and outlined, • Assist other service technicians or staff with questions to ensure accuracy and efficiency, • Answer high-level questions posed by customers and service staff, • Maintain a clean and safe service departmentMaster Automotive Technician / Mechanic Benefits:, • Full-time position with flexible shifts, • Union pay rates, • Medical & Dental benefits, • Great team environment, tremendous opportunity for growth!, • Highest paying Shop in the Tri-State Area, • Excellent Air-conditioned and heated shop, • Career development and glide path for Technicians, • Paid Training, • Union Shop, • Great Benefits, • Paid Vacation, • Paid Birthday, • Paid Sick days, • 401K and Retirement plan, • Great work environment, • 4 Day work weekLand Rover Huntington is a proud member of the Kollective Automotive Group. KOLLECTIVE - Keys to successEvery Kollective dealership team member is expected to work in concert with other departments to provide an unparalleled ownership experience for each customer they meet, speak to or work with ... to go beyond what is required ... to exceed the customer’s expectations in every thought, word and gesture. That is not only a Kollective tradition, but the very foundation of our success.ABOUTKOLLECTIVE is a new breed of automotive brand. We proudly sell and service some of the world's luxurious and iconic brands, Mercedes-Benz, Lexus, Audi and Jaguar Land Rover. We have operations in New York City, Long Island, New Jersey and Texas.MISSION STATEMENTOur goal is to deliver an express indelible luxury customer shopping experience that is the bedrock of all we do.Our dealership environments reflect the changing global marketplace and reflect the way our customers shop for vehicles. We work tirelessly to grow our businesses partnering within our communities where we will sell and service new, pre-owned, and CPO vehicles. We aren’t purely a car dealership, we are digital and physical retail destination, a way of life, a conduit to a better lifestyle.We care deeply about our customers, employees and the community. Working in the automotive business is not just a job for us, it’s a calling. We’ve committed to this industry because we’re all striving to be a part of something that makes a real, meaningful difference.In short, we always ‘do the right thing.’ And together we are “Driving Modern Luxury.”EQUAL OPPORTUNITYWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Environmental assessment company hiring a Field Technician with hands on skills, must be comfortable working at height This Jobot Job is hosted by: Tony Marasco Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $25 - $28 per hour A bit about us: We have over 40 years of experience providing environmental quality testing, management and consulting services to municipalities, utilities, healthcare facilities, private industry, consulting firms and government agencies. We provide customized solutions and services to form the foundation of a solid environmental management program. Why join us? Technical training Career development 15% travel Job Details Stack testing firm located in Long Island NY , performs stationary source emission evaluations, air permit compliance for combustion sources. Utilizing USEPA reference test methods. Needing hands on working with hand tools, computer knowledge excel, word etc. Conduct field tests, provide engineering team data and help with reports. Must work at heights on smoke stacks, hoist 40 lbs, have drivers license, car. Local work in and around NYC metro area, out of town 10-15 % of work load. will train. The job entails starting at the office each morning to collect the company van and the sample kits for each day, and going to client sites to help collect samples and work on smoke stacks. Required Qualifications: Mechanical technician professional experience OR Technical School education Strong hands on mechanical skills Basic mechanical and electrical systems experience Basic computer skills Valid Drivers license (will drive company van) Comfortable with heights (will work on smoke stacks) Ability to lift 45 pounds Reliability Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionDescription: Temperature Control Assembler Cox & Company, a leader in solving the aerospace industry's most challenging ice protection and temperature control problems, is seeking a dedicated and outgoing Electronics Assembler to join our Temperature Control Systems Department. With over 80 years of experience working with OEMs, Tier 1 and Tier 2 suppliers, and major modification and finishing centers worldwide, we pride ourselves on delivering high-quality, full-lifecycle support from initial design to aircraft integration and operation. This is an exciting opportunity to contribute to innovative aerospace solutions in a dynamic and collaborative environment. Key Responsibilities: • Assemble electronic subassemblies according to engineering specifications and work instructions, • Perform detailed inspections and testing of assembled components to ensure quality standards, • Collaborate with engineering and production teams to troubleshoot and resolve assembly issues, • Maintain a clean and organized work area, adhering to safety and quality protocols, • Document assembly processes and test results accurately in company systems, • Assist in the continuous improvement of assembly procedures and workflows Skills and Qualifications: • Proven experience in electronic assembly, preferably within aerospace or related industries, • Strong understanding of electronic components, wiring, and soldering techniques, • Excellent attention to detail and manual dexterity, • Ability to read and interpret technical drawings, schematics, and work instructions, • Good communication skills and a team-oriented attitude, • Ability to work in a fast-paced environment and meet production deadlines At Cox & Company, we foster a culture of innovation, teamwork, and continuous growth. We offer competitive benefits and opportunities for professional development, making it an ideal place to advance your career in aerospace manufacturing. Join us in delivering cutting-edge solutions that keep aircraft operating safely and efficiently worldwide. Requirements: • Assembles fabricated components to make subassemblies or assemblies for electrical or electronic systems using hand and electrical tools. Qualifications • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience • High school diploma or general education degree (GED); or one to three years related experience and/or training., • Experience with Electro/Mechanical assemblies is a plus, • Experience with wire strippers, crimping tools, and soldering Proficiency Skills • Ability to follow detailed written and verbal instructions in English., • Ability to read and understand technical drawings (blueprints)., • Experience reading and following Manufacturing Procedures or Specifications to accurately complete job assemblies., • Ability to perform repetitive assembly operations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to apply common sense understanding to carry out simple one or two step instructions. Ability to deal with standardized situations with only occasional or no variables., • Ability to work with various small tools and parts., • Ability to use wire strippers, crimping tools, and soldering irons., • Has good reading vision, color discrimination, and the ability to speak clearly. Computer Skills • Ability to use basic file systems to navigate to and open drawings, and manufacturing procedures., • Using scanner for time/attendance/work traveler. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 40 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

We are seeking an outgoing individual to join our team as a Coil Winder. As a Coil Winder, you will be responsible for winding coils used in electrical equipment and instruments, or as electronic components, according to wiring diagrams, a sample coil, or a work order. Job Function: Responsibilities: • Wind wire onto magnetic cores to specified number of turns, according to wiring diagrams, sample coil, or work order., • Cut wire to specified lengths, using wire cutters., • Tins wire ends, using soldering iron., • Insert and adjust air core, iron core, or laminate core into coil., • Inspect and test completed coils for continuity, resistance, and shorts, using ohmmeter, and other testing devices., • Record production and operational data on specified forms., • Maintain a clean and safe work area. Job Requirement: Requirements: • High school diploma or equivalent., • Previous experience in coil winding or related field preferred., • Ability to read and interpret wiring diagrams and work orders., • Familiarity with hand tools and soldering equipment., • Strong attention to detail and ability to perform repetitive tasks., • Ability to work independently and as part of a team., • Good communication and interpersonal skills., • Must be able to stand for extended periods of time and lift up to 50 pounds.

Who We Are We are a team of motivated, engaged, and exceptionally talented self-starters, willing to roll up our sleeves and do what is necessary to get the job done. If you are interested in joining this dynamic team and have a passion to learn, develop, and want your experience to make an immediate impact, please apply. To find out more about us, please visit our website: www.lipower.org What We Offer We offer an environment of continuous development and growth with a thriving company culture, exceptional colleagues, and exceptional benefits. Our benefit package includes: • Hybrid work options available and flexible hours, • Excellent health insurance, • No employee cost for dental and vision insurance, • Paid holidays and generous paid time off, • Professional development opportunities, • Educational assistance opportunities, • Multiple retirement plan options with company contribution, • Short-term and long-term disability coverage, • Flexible spending account with company contribution, • Life Insurance, • 529 College Savings Program, • $300 Wellness Reimbursement What You’ll Do At LIPA The Director, Grid Modernization and Innovation is a pivotal leadership role within the Electric Transmission & Distribution (T&D) performance management organization at LIPA, responsible for establishing strategic direction and performance management related to grid modernization programs and technologies. This role is accountable for establishing performance frameworks, metrics, and governance structures that measure and enhance the effectiveness of grid modernization programs across the electric system. This includes Operational Technology (OT) platforms that enable Transmission and Distribution control room functions, including the development and integration of advanced control room environments. The role ensures that system capabilities supporting real-time grid management are aligned, scalable, and optimized to deliver reliability, resilience, and operational excellence. The position also plays a central role in architecting and overseeing the planning, design, buildout, and performance management of a modern Transmission and Distribution electric system. They shall also engage with external stakeholders and industry peers to adopt and contribute to best practices in grid modernization. Through these efforts, the leader helps drive LIPA’s transition to a cleaner, smarter, and more sustainable energy future. The Director will: • Serve as the key performance manager for Grid Modernization initiatives including OT platforms, ensuring alignment with strategic goals and regulatory compliance. Key areas of focus include providing strategic direction and performance management for the deployment and integration of advanced field devices, sensors as well as Energy Management System (EMS), advanced load flow tools, Advanced Distribution Management Systems (ADMS), Distributed Energy Resource Management Systems (DERMS), Outage Management Systems (OMS), Volt-VAR optimization, and real-time system operations., • Lead the development of the future-state electric system architecture by evaluating emerging technologies, grid modernization strategies, operational models, and evolving system needs., • Establish a long-term vision for an integrated T&D system design, OT, data architecture, and digital infrastructure to support a resilient, intelligent, and flexible grid., • Provide guidance and lead the development of strategic technology roadmaps for next-generation utility operations, including advanced grid intelligence, AI-enabled applications, telecommunications networks, distributed energy resource integration, edge computing, real-time analytics, and enterprise data management platforms., • Assess emerging products and vendor solutions to determine alignment with system architecture., • Provide strategic direction and manage performance on initiatives and projects associated with modernizing the T&D electric system., • Develop, review, and redefine the performance metrics to ensure quality, efficiency and financial viability., • Champion a strategic roadmap for NextGen Control Room, ensuring responsiveness to industry trends and emerging opportunities, and focusing on people, process, technology, and facilities., • Collaborate closely with the IT organization which is responsible for system administration, technical implementation, and support, to ensure seamless alignment between business needs and technical execution., • Responsible for defining the scope of T&D related technology projects, providing guidance towards functional and business requirements, articulating business benefits, and securing senior executive project approvals., • Ensure appropriate performance management for project implementation activities and make key business decisions regarding implementation options and configurations., • Recommend resource strategies to support grid modernization initiatives., • Collaborate with internal and service provider teams, including IT, system operations, engineering, system planning, field operations, and customer care, to ensure cohesive and effective project planning and execution., • Partner with IT to provide cross-functional leadership to ensure effective coordination of major OT projects across business departments and disciplines., • Represent LIPA in industry forums, contributing to best practices and advocating for the company’s position on grid modernization and energy policy., • Provide operational insights to the regulatory team to support policy development and advocacy., • Define the business and functional requirements for digital grid solutions and robust cybersecurity measures to protect critical infrastructure and ensure secure operations., • Drive initiatives that support the transition to cleaner energy sources and sustainable grid practices., • Guide and lead infrastructure projects that enable advanced operational technology capabilities and enhance system reliability., • Coordinate with engineering, construction, and operations teams to ensure that the system and facility upgrades align with grid modernization goals and technical requirements., • Oversee budgeting, scheduling, and resource allocation for construction projects, ensuring timely and cost-effective delivery., • Ensure all construction activities comply with safety standards, regulatory requirements, and industry best practices., • Monitor construction progress and mitigate risks to ensure successful project outcomes and alignment with strategic objectives., • Manage and/or lead additional initiatives aligned with enterprise priorities as the modernization portfolio evolves., • Perform other related tasks and duties as required. What We Need • Bachelor’s Degree in Engineering or Engineering Technology., • Ten (10) years of successful experience in system operations, engineering or other related fields., • Direct experience with the electric energy industry., • Proven track record of leading cross-functional teams and managing complex projects within the energy sector., • Strong foundational knowledge in electrical engineering principles, with demonstrated knowledge of emerging technologies such as digitization, data science, artificial intelligence (AI), and their applications within the power industry., • Deep understanding of system operations processes and technologies, particularly within electric transmission and distribution (T&D) environments., • Strong project management capabilities, with a track record of successfully leading complex, cross-functional initiatives from concept through execution., • Business development acumen, with excellent presentation, communication, and stakeholder engagement skills., • Strong leadership and organizational influence skills, with the ability to drive alignment across diverse teams and departments., • Exceptional written and verbal communication skills, with the ability to convey complex technical concepts to both technical and non-technical audiences., • Customer-focused mindset, committed to delivering high-quality, innovative solutions that meet evolving operational needs., • Demonstrated initiative as a proactive change agent, with a forward-thinking, solution-oriented approach., • Accountability-driven, with a commitment to personal responsibility and holding others to high performance standards., • Collaborative team player who fosters a culture of teamwork, inclusion, and shared success., • Strong leadership skills with the ability to inspire, guide, and motivate others toward achieving strategic goals., • Sound decision-making and problem-solving skills that align with and support the organization’s long-term vision and objectives., • Ability to stay ahead of industry trends and emerging technologies, ensuring the organization remains a leader in grid modernization and digital transformation., • Strong analytical and problem-solving skills, with the ability to adapt to emerging industry trends and technologies., • Ability to analyze data and communicate observations effectively, utilizing advanced data analytics and/or AI. What We Want (Preferred Qualifications) • Advanced degree in Engineering or Master’s in Business Administration (MBA), • Experience with operational technology (OT) systems and their integration into electric T&D operations., • Experience in protection and control systems, with an understanding of their role in modern grid operations., • Knowledge of Telecommunication systems and infrastructure is preferred. Salary Range • $190,800 - $233,200 How You Can Apply: Interested parties should submit their cover letter and resume to Gary Martens, Director, Human Resources and Administration, at 2026dirgridmodernzation@lipower.org LIPA is an equal opportunity employer. All people with disabilities are encouraged to apply. If you require a reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to Gary Martens, Director, Human Resources and Administration.

Company Overview: MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. Position Overview: The Field Technician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. Responsibilities: As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance., • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations., • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues., • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns., • Preparing formal documentation of all field activities, task procedures, and maintenance actions., • Adhering to all safety protocols, company policies, and industry standards., • Providing technical guidance and support to junior technicians as needed., • Demonstrating strong attention to detail in all aspects of work., • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments., • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks., • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted., • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting., • Executing work instructions for both electrical and mechanical repairs on on-site equipment., • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC., • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results. Qualifications: • Associates Degree in Engineering or equivalent Technical Certification/Training, • Licensed Electrician and NABCEP certification preferred., • Valid Driver’s license with clean record., • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred., • Ability to work remotely and independently., • Project management/field operations management experience preferred., • Previous experience working with power electronic conversion equipment., • Experience with metering and test equipment., • Experience with centralized DAS/SCADA/EMS control systems., • Working knowledge of Commercial Power Plant Operations., • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications., • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools., • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred)., • Ability to efficiently troubleshoot system failures., • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Must be willing and able to climb ladders, stairs and work on rooftops., • Ability to work in extreme weather conditions. Benefits: • Competitive salary and performance-based incentives, • Health, dental, and vision insurance, • Retirement savings plan, • Opportunities for professional development and career advancement

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Maintenance Technician. The HVAC Maintenance Technician is responsible for performing routine maintenance, inspections, seasonal tune-ups on residential heating and cooling systems. The goal is to ensure systems are operating efficiently, safely, and reliably while providing excellent customer service. Key Responsibilities: • Perform seasonal maintenance and tune-ups on HVAC systems, including cleaning, inspecting, and testing equipment., • Diagnose system issues and troubleshoot mechanical and electrical problems., • Check system components such as thermostats, electrical connections, condensate drains, motors, filters, and refrigerant levels., • Identify potential issues and recommend repairs or replacements when necessary., • Maintain accurate records of all maintenance activities, inspections, and customer interactions., • Follow company safety procedures and adhere to all local, state, and federal HVAC codes., • Communicate clearly and professionally with customers about findings, recommendations, and system performance., • Ensure all tools, equipment, and vehicles are properly maintained and organized., • Assist other team members and departments as needed to support daily operations. Qualifications: • High school diploma or equivalent (technical training preferred)., • Minimum of 3 years of experience in HVAC maintenance or related field., • Valid driver's license with a clean driving record., • Strong knowledge of HVAC systems, components, and maintenance procedures., • Excellent communication and customer service skills., • Ability to work independently and manage time effectively., • Must be able to lift up to 50 lbs and work in a variety of environments (indoor/outdoor, attics, crawl spaces) Why you'll love Universe Home Services: We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program, • Commissions And much more! Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers and with that growth we have maintained valued employees for over 20 years! Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Oil Heating Technician You will take the lead in troubleshooting and repair efforts, identifying and diagnosing HVAC issues on oil heating systems for residential clients. Handles warranty services efficiently and responds promptly to perform emergency repairs. What you Will do: • Service and repair Oil burners, Oil furnaces, and boiler heating systems., • Perform seasonal maintenance and tune-ups on HVAC and oil fired heating systems, including cleaning, inspecting, and testing equipment., • Clean and replace burner components such as oil nozzles., • Perform routine service, emergency repairs, and preventative maintenance for residential clients., • Recommend the best solutions for the customer's heating needs., • Collaborate with the team to ensure projects are completed efficiently., • Maintain communication with dispatch, your manager, parts, and installation teams., • Educate and assist customers in choosing maintenance plans, service options, and any available financing solutions. QUALIFICATIONS FOR THE JOB: • Proven experience with oil heating systems and related equipment., • Strong troubleshooting and diagnostic skills., • Excellent customer service and communication skills., • Ability to work independently as well as part of a team., • Valid driver's license and reliable transportation., • Ability to explain technical information to customers., • Strong listening and communication skills., • Teamwork oriented., • Ability to thrive in a fast-paced, customer-focused work environment. Why you'll love Universe Home Services: We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program, • Commissions And much more! Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers and with that growth we have maintained valued employees for over 20 years! Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job Description * Season 2026 * Service Maintenance Technician Your role as a Service Maintenance Technician matters because it delivers excellent customer experience, and you are working as part of a winning team. At our company, every team member plays a crucial role in shaping the future of our business. Your dedication and passion for excellence will not only drive your personal growth but also contribute to our collective success. Together, we create memorable experiences for our customers, foster innovation, and build a supportive and dynamic work environment. Join us and be a part of a team that values your contributions and celebrates your achievements. https://azureon.com/about/#CoreValues As a Pool Service Maintenance Technician, you will be responsible for maintaining residential pool facilities by performing routine maintenance, repairs, and water chemistry testing to ensure a hassle-free swimming experience for customers. This role also offers opportunities for professional growth, allowing you to expand your expertise in the pool industry and develop leadership skills through ongoing training and education. Key Responsibilities: • Vacuum pool debris, skim surface, brush pool walls and tiles to remove dirt and algae., • Regularly test pool water for pH levels, chlorine concentrations, and other chemicals, maintaining Langelier Saturation Index (LSI) balance., • Perform preventative maintenance on pumps, filters, and heaters., • Perform minor repairs to equipment, such as damage filters, gaskets, O-rings, leaks in pipes or fittings, adjusting loose components. Lubricating moving parts to ensure smooth operation., • Identify parts needed and place accurate, detailed part requests with office., • Assist with emergency repair situations, • Perform pool start-ups and winterizations, ensuring all procedures are followed correctly to prevent freeze damage on all types of pool equipment. Stay informed on the latest best practices for proper winterization., • Understand safe methods of draining and cleaning pools to prevent pool popping or structural damage., • Inform homeowners and the office of non-compliance safety code issues., • Complete work orders and record all activities, including services done, before/after pictures, and chemical readings and dosages., • Keep the truck organized and stocked, • Follow and Promote safety procedures What you’ll need to be successful in this role, training will be provided: • Experience with plumbing & electrical work preferred., • Basic mechanical skills., • Knowledge of pool water circulation, equipment operation & maintenance, pool chemicals and chemical handling., • Comfortably interacting with clients, as needed., • Dependability, and the ability to adapt to changing demands., • Excellent organizational skills, attention to detail, focus, and accuracy., • Ability to work with a team, follow directions, and complete tasks., • Work towards a goal to take on a service technician’s role. Requirements: • High school diploma or GED certificate, • Valid driver’s license and 3 years minimum driving experience, • Ability to stand, walk, and sit for long periods, • Ability to climb, stoop, kneel, reach, push, pull, and grasp, • Capability to lift moderate to heavy objects, typically around 50 lbs., with occasional requirements to lift up to 75 lbs. Benefits: • Retirement savings plan with employer match., • Paid time off and holidays., • Ongoing training and professional development opportunities.

Job DescriptionDescription: Job Title: Winder Company: Cox & Company, Inc. Location: Plainview, NY We are seeking an outgoing individual to join our team as a Coil Winder. As a Coil Winder, you will be responsible for winding coils used in electrical equipment and instruments, or as electronic components, according to wiring diagrams, sample coil, or work order by performing the following duties: Responsibilities: • Wind wire onto magnetic cores to specified number of turns, according to wiring diagrams, sample coil, or work order., • Cut wire to specified lengths, using wire cutters., • Tins wire ends, using soldering iron., • Insert and adjust air core, iron core, or laminate core into coil., • Inspect and test completed coils for continuity, resistance, and shorts, using ohmmeter, and other testing devices., • Record production and operational data on specified forms., • Maintain a clean and safe work area. Requirements: • High school diploma or equivalent., • Previous experience in coil winding or related field preferred., • Ability to read and interpret wiring diagrams and work orders., • Familiarity with hand tools and soldering equipment., • Strong attention to detail and ability to perform repetitive tasks., • Ability to work independently and as part of a team., • Good communication and interpersonal skills., • Must be able to stand for extended periods of time and lift up to 50 pounds. If you are a reliable and detail-oriented individual with a passion for electronics, we encourage you to apply for this exciting opportunity. Cox & Company, Inc. is an equal opportunity employer and we welcome applicants from all backgrounds to apply. Requirements: Role and Responsibilities • Reviews wiring diagrams and work order or examines sample coil to ascertain type and size of wire specified, and type, size, length, circumference, and primary and secondary windings of coil to be wound., • Selects coil-forming device for specified coil and fastens device onto machine arbor, mandrel, or spindle or fastens device between chuck and tail stock., • Threads end of wire from reel through tension device, guides, and spreader, bends wire ends to form lead and attaches lead to coil core., • Turns setscrews to adjust tension on wire and sets counter for number of turns specified., • Starts machine and manually feeds wire over coil core or spreader to obtain even and uniform winding and shape of coil., • Observes counter and stops machine at specified number of coils., • Wraps insulation between layers and around wound coil or inserts plastic blocks between turns to form cooling ducts., • Cuts wire to form leads., • Pounds coil with hammer or mallet to shape end windings or remove coil from fixtures., • Winds materials such as cotton, glass mica, paper, or tape around coil, and brushes varnish on coil or dips coil in varnish, epoxy, or wax to reinforce and seal coil., • Strips insulation from end of lead wires, threads lead wires through insulating sleeves or slides sleeves over leads, and solders lead wires to terminals., • Ability to read and comprehend simple instructions in English. Qualifications and Education Requirements • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionRF Electronics Repair Technician We are seeking a hands-on RF Electronics Repair Technician to join a growing manufacturing team. In this role, you will troubleshoot, repair, and test RF and electronic equipment down to the component level, ensuring products meet performance and quality standards. This is a great opportunity for someone with strong test equipment experience (oscilloscopes, multimeters) and troubleshooting skills who wants to grow within a collaborative, engineering-driven environment. • Farmingdale, NY, • $60,000 – $90,000 (based on experience), • Full-Time | 9/80 Work Schedule, • 100% Onsite (Manufacturing Environment) Key Responsibilities • Troubleshoot RF and electronic equipment to identify root cause of failures, • Repair and replace defective components at the board/component level, • Test and validate equipment using oscilloscopes, multimeters, and other test tools, • Align, adjust, and calibrate equipment to engineering specifications, • Repair printed circuit boards, amplifiers, and multiplexing systems, • Review engineering change notices and apply updates as needed, • Maintain detailed documentation of repairs, calibrations, and testing, • Support Engineering, Production, Test, and Field Service teams with technical issues, • Perform rework, mechanical adjustments, and minor cosmetic repairs as needed Top Requirements (Must-Haves) • Experience with electronic troubleshooting and repair, • Hands-on experience with test equipment (oscilloscopes, multimeters), • Ability to troubleshoot down to the component level (board-level experience also considered), • Experience working with RF or microwave (MW) equipment Ideal Candidate • Strong troubleshooter who enjoys hands-on technical work, • Confident using oscilloscopes and multimeters, • Detail-oriented and methodical in diagnosing issues, • Eager to learn and grow in RF/electronics repair Required Qualifications • Associate’s or Bachelor’s degree in Electronics, Electrical Engineering, or related field (or equivalent experience), • 1–3 years of experience as an electronics, RF, or repair technician, • Strong understanding of electronic components and circuits, • Comfortable using hand tools and working in a bench repair environment Preferred Skills • Experience testing and troubleshooting RF circuits, • Background in manufacturing or production environments, • Familiarity with amplifiers, PCB repair, or multiplexing systems, • Strong documentation and data entry skills Work Environment • 100% onsite in a manufacturing facility in Farmingdale, NY, • Bench-based repair work with access to test equipment and specialized chambers, • Collaborative environment with support from leads and supervisors (training provided), • 9/80 schedule: 9-hour days with every other Friday off (short Friday on alternating weeks), • Bi-weekly pay Why Join? • Opportunity to work on advanced RF and electronic systems, • Strong training and support from experienced technicians and leadership, • Comprehensive benefits package (medical, dental, vision, 401k, PTO, and more), • Performance-based bonuses may be available, • Growth potential within a stable and expanding organizationJob Type & Location This is a Permanent position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $60000.00 - $90000.00/yr. Medical & Prescription Coverage Employees have access to a high-deductible comprehensive medical plan through BlueCross BlueShield, which includes: - Preventive care at no cost (e.g., routine exams, immunizations, cancer screenings) - Office visits, lab work, and diagnostic imaging with copays - Emergency and urgent care services - Inpatient and outpatient hospitalization - Maternity care and newborn services - Mental health and substance abuse treatment Prescription drug coverage includes a mandatory generic substitution policy, with tiered copays applied after the deductible. Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jun 6, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Position Description: Seeking a motivated, intelligent and hard-working individual to Develop and maintain quality and regulatory compliance in Genadynes' processes. Individual will ensure compliance with ISO 13485 and MDSAP requirements are maintained. Specific Responsibilities : Ensure the quality and processes are practiced and maintained. Compile documents required for audits. Create and maintain product technical files. Initiate corrective and preventive actions for non-conformities. Maintain/calibrate the accuracy of all testing equipment. Conduct risk assessments of medical devices and processes. Maintaining the effectiveness of quality control system and non-conforming materials control system. Discuss and solve quality problems with vendors. Investigate problems and make improvement on current processes. Develop/design effective test methods. Facilitate software design and development for medical devices. Performance testing and reporting on software, hardware and the compatibility for all accessories. Perform risk assessments for medical devices and accessories. Development and prototyping of new products with existing or new vendors. Abilities: Familiar with FDA CFR 820, ISO 134850, SOPs regulations. Extreme attention to details. Ability to think outside the box with excellent problem solving abilities. Excellent interpersonal, communication, and writing skills. Highly organized. Excellent computational skills. Knowledge of European regulations is a plus. Knowledge of common medical materials (silicone, polyurethane, etc.) Knowledge of electrical circuits and basic programming. Knowledge of C/C++ is a plus. Maintain MDD/MDR EN ISO Experiences: Regulatory compliance. Quality management. Cross functional team management. Quality assurance Requirements: Bachelor degree in mechanical, electrical, material, biomedical engineering or relative field. (Master degree preferred.) Benefits: Medical, Dental, Vision, PTO, 401K, Legal Services, FSA, Life Insurance Salary Range: $68,000 - $72,000/Annual Powered by JazzHR oSPuR7OKHc

Job DescriptionDescription: Job Description: Responsible for the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Salary: $83,200.00/yr Availability: On Call 24/7 Essential Job Duties Under the Direction of the Director of Engineering and Operations: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Conduct, schedule and manage periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform and/or oversee electrical and plumbing repair and troubleshooting., 6. Perform and/or oversee mechanical projects., 7. Perform all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Troubleshoot, evaluate equipment/systems and recommend upgrades., 10. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 11. Order parts and supplies as required and maintain stock and inventory control., 12. Work with the Director of Engineering and Building Manager in planning and controlling annual and capital budgets., 13. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 14. Be familiar with and conform to all written operating procedures associated with site., 15. Ensure the cleanliness and appearance of all work areas., 16. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member with all staff, 17. Perform other duties as assigned. Skills, Education and Experience: · Minimum of five (5) years of experience in building operations, engineering and equipment and systems maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Strong customer service, communication and computer skills inclusive of payroll reporting · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders A detailed scope-of-work will be discussed during the interview process. The requirements and duties described above may be modified or waived by the Company in its sole discretion without notice. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job DescriptionDescription: JOB TITLE: RF Technician Job Summary: As a RF Technician, you will perform advanced RF/Microwave system testing, trouble shooting, and electro-mechanical diagnostics for sub-assemblies and high-level system assemblies. This ideal candidate possesses exceptional troubleshooting skills in RF technology and Analog/Digital circuits, with the ability to work independently or collaboratively in a dynamic environment. Key responsibilities: · Conduct testing and troubleshooting of RF/Microwave sub-assemblies and upper-level assemblies according to system specifications. · Develop test procedures and create documentation, including Data Sheets and Acceptance Test Procedures (ATP) · Perform evaluation, acceptance, and sell-off testing in compliance with in-house QA standards and government audits. · Assist in reverse engineering of RF based products and generate schematics from existing circuits. · Utilize commercial test equipment, including Spectrum Analyzers, Vector Network Analyzers, Power Meters, and Oscilloscopes, with proficiency. · Calibrate, maintain, and repair electronic test equipment and oversee the upkeep of the Environmental Testing Facility assets. · Maintain and manage the computerized calibration database for IM & TE (Inspection, Measuring and Test Equipment) assets. · Recall IM & TE due for calibration to ensure operational accuracy and compliance. · Work independently and as part of a team with minimal supervision to meet project deadlines and deliver high-quality results. · Collaborate with engineering team to resolve technical challenges and optimize performance. Required Qualifications: · Associate’s degree in Electrical Technology/Electronics or equivalent · Extensive experience (7+ years) in a fast-paced repair or production environment may be considered in lieu of formal education. · Proficient in the use of advanced RF test equipment, including Spectrum Analyzers, Vector Network Analyzers Power Meters and Oscilloscopes. · Experience in developing and documenting test procedures. · Strong analytical, organizational and communication skills. Preferred Qualifications: · Familiarity with ESD handling protocols and production safety standards. · Experience with Power Amplifiers and Low Noise Amplifiers. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job DescriptionDescription: The candidate will support the electrical design and test of Rate and Rate Integrating Gyroscopes. This will include the design of electrical gyroscope components such as motors, pickoffs and torquers, as well as custom built test fixtures and test harnesses. In addition, the candidate will assist in the design of tests and provide analytical support for testing Rate and Rate Integrating Gyroscopes, including Acceptance Test Procedures (ATP), scale factor, transfer function, drift, alignment, and 1st and 2nd order system stability characteristics (gain/phase analysis), etc. EDUCATION: Minimum 4-year degree in electrical or electronics engineering, or other technical degree with appropriate work history or background. EXPERIENCE: 5+ years dealing with four or more of the following: Electronic product or component design and/or analysis Basic understanding of 1st or 2nd order control systems (servo systems, spring/mass/damper) Electronics systems (amplifiers, power supplies, demodulators, signal conditioning, filters) Electromechanical, mechanical, or electromagnetic systems Engineered (specialized) products to customer/government specifications Custom (product specific) Test systems Environmental testing (temperature, shock, vibration as a minimum) Hands-on design, test, and troubleshooting experience required SKILLS: Required skill set shall include as a minimum: Can interpret, digest, and produce technical specifications and procedures Computer literacy Excellent communications, presentation, and written skills, including customer facing Analytical (math) modeling capability, 1st and 2nd order systems Electrical test equipment operation skills, e.g.; DVM, oscilloscope, signal generator PC Board design Analog circuit design and component selection Servo (control system) analysis, and system design (1st and 2nd order systems), gain/phase analysis Additional skills desirable: Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment Microcontroller/microprocessor based digital and/or mixed signal circuit and system design Magnetic circuit analysis and design capability Basic mechanical instruments skills, e.g.; micrometers, calipers, dial indicators, precision levels An outstanding self-starter with a can-do attitude willing to go above and beyond the normal Requirements:

Job Description Take the lead in a senior-level diesel technician role where your experience is trusted, and your skills are put to work on complex diagnostics and repairs. As a Fleet Technician, you'll handle advanced mechanical issues independently, support shop operations, and help guide junior technicians-all while keeping a critical fleet safe and road-ready. Pay & Perks • $36.07/hr (per union agreement), • $5,000 sign-on bonus (paid at $1667 intervals after 60, 120, and 240 days), • $3,000 referral bonus (paid after 30 days of satisfactory performance), • $300 annual tool allowance, • $125 annual boot allowance, • Overtime opportunities available, • Stable, year-round work supporting essential transportation Schedule • First shift: 5:00 am to 1:30 pm, • Second shift: 1:30 pm to 10:00 pmWhat You'll Do, • Diagnose and repair complex mechanical and electrical issues on buses, vans, and fleet vehicles, • Perform advanced repairs including brakes, engines, drivetrains, suspensions, and transmissions, • Lead preventative maintenance (PMs), safety inspections, and annual inspections, • Remove, overhaul, and reinstall major components (engine, transmission, differential), • Use diagnostic software and manufacturer systems to troubleshoot faults, • Support and mentor Technician I and II team members, • Lead road calls and emergency repairs as needed, • Maintain accurate work orders, parts usage, and maintenance records, • Identify safety concerns and ensure all work meets company and DOT standards, • Safely move vehicles and maintain shop equipmentWhat We're Looking For, • Diesel repair experience, • Strong diagnostic ability-able to troubleshoot and fix issues independently, • Experience with electrical, mechanical, and hydraulic systems, • Ability to mentor junior techs and contribute to shop leadership, • Valid driver's license (CDL with passenger endorsement required or ability to obtain within 3 months), • Ability to meet DOT and state inspection standards, • Own and maintain a complete set of tools, • Reliable, consistent attendanceWork Environment, • Shop environment with exposure to dust, dirt, grease, and outdoor conditions, • Ability to lift 50+ lbs, • Work in physically demanding positions (including under vehicles on a creeper) First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf. Company DescriptionAbout us An industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America. Industry leader We safely operate more than one third of all contracted school buses in North America. Together our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon. We operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces. Innovation We were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling. Passionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route. Awards & recognition We won the Occupational Excellence Achievement Award from the National Safety Council two years in a row. Dedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America. Teamwork and trust It takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners. We’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience. Our culture We live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve. Safety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives. Learning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future. Making a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day. Careers for all – We’re an Equal Opportunity Employer and an Employer of Choice. By consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.About us\r\nAn industry leader famous for our yellow school buses and service and safety excellence, we’ve provided student transportation services to schools for over 100 years. Continually investing in the services of the future, we’re proud to be part of FirstGroup America – the largest provider of safe, reliable and sustainable surface passenger transportation services in North America.\r\n\r\nIndustry leader\r\nWe safely operate more than one third of all contracted school buses in North America.\r\nTogether our 50,000 school buses travel nearly 600 million miles per year — the equivalent of 1,200 round trips to the moon.\r\nWe operate in around 550 locations throughout 38 U.S. states and 8 Canadian provinces.\r\n\r\nInnovation\r\nWe were the first school bus company to utilize global positioning systems (GPS), so at any one time we know where all of our buses are and how fast they’re travelling.\r\nPassionate about safety, we’ve installed Safety Crossing Gates on the front of all of our school buses and use the Child Check-MateTM electronic reminder system to make sure no sleeping children remain inside a bus at the end of each route.\r\n\r\nAwards & recognition\r\nWe won the Occupational Excellence Achievement Award from the National Safety Council two years in a row.\r\nDedicated to safety, FirstGroup received the National Safety Council’s (NSC) Green Cross for Safety Medal - the highest award for safety in North America.\r\n\r\nTeamwork and trust\r\nIt takes a diverse team of skilled professionals to provide a safe, effective and efficient student transportation system. From our school bus drivers and location managers to routers, dispatchers and fleet technician mechanics, the work we do every day makes a big impact on the daily lives of students, parents, local communities and school district partners.\r\n\r\nWe’re very proud of our elite team of over 55,000 dedicated, caring and diverse professionals. And they are the #1 reason we’re trusted by over 1,400 school districts - more than any other provider. Everybody here plays their part in creating a positive school bus experience.\r\n\r\nOur culture\r\nWe live and breathe our vision and values. They are embedded in our culture and drive our commitment to our customers and communities. Our culture fosters growth and promotes respect, reliability, responsibility and safety. And we recruit people who share these values and will work together to build strong and trusting partnerships in the communities we serve.\r\n\r\nSafety – Although our safety record is twice as safe as the industry average, we continually seek out opportunities to enhance our operational and safety initiatives.\r\nLearning – Through our learning culture that spans over 550 locations, we receive and share insight from our people to enhance our service now and in the future.\r\nMaking a difference - By doing our job well, we make a positive impact on many lives – including the millions of students who travel with us every school day.\r\nCareers for all – We’re an Equal Opportunity Employer and an Employer of Choice.\r\nBy consistently encouraging and supporting an open dialogue with our people and partners, we’re able to share new ideas and develop new ways to meet the needs of our customers and passengers. At First Student, you’ll feel empowered to serve your community. So join the team and start to make a difference.

Job Description The Building People, LLC, has a position open for an experienced Senior Building Automation Specialist. BAS technicians support a building’s management, tenants, and systems by managing BAS equipment and technologies. A BAS technician’s primary duties include: • Monitoring BAS components for HVAC, plumbing, electricity, computer networking, lighting, and security., • Working with building managers, tenants, and visitors to provide a safe and comfortable experience inside the building., • Working with architects, engineers, contractors, and other professionals to maintain or expand the building’s features and capacities., • Collaborating with BAS vendors and solution to use the data from BAS components to improve a building’s performance or reduce its operating cost., • Perform Preventative Maintenance and Commissioning tests on complete automation systems., • Make recommendations for systems upgrades and efficiency of operations. Required Experience & Skills • Extensive knowledge of multiple brands of manufactures of Building Automation Hardware and Software., • 5 years Tridium Niagara integration experience., • 5 years hands on troubleshooting and diagnostics of proprietary and non-proprietary control systems., • Recent experience working on US Federal Properties, Projects, and systems., • Troubleshooting, testing, and repairing/replacing automation equipment that manages a building’s comfort, efficiency, and safety., • Troubleshooting electrical control signals to verify operations., • Troubleshooting programming via computer control software to verify proper operations., • Extensive knowledge of HVAC operations and systems., • Ability to pass 7-year background investigation for access to US Federal Owned facilities, Property and Systems. Preferred Education • Any Manufacture of Building Automation Controls Training Certification., • Niagara Certification preferred., • Any HVAC training/certifications.

Job DescriptionDescription: JOB TITLE: Engineering/Electronic Technician Company Overview: U. S. Dynamics Corporation is a leading firm in the Manufacturing Industry, known for our commitment to innovation, quality and sustainability. Our Engineering team is at the heart of designing solutions that meet the future needs of our customers worldwide. We are currently seeking a skilled Engineering Drafter to join our dynamic team and continue our mission of excellence. Job Summary: The candidate will build, troubleshoot, repair, and maintain custom built as well as commercial production test equipment. This typically includes; specialized electronic production test fixtures, wiring harnesses and other cables, and other miscellaneous electronic or electrical devices. This will require the successful candidate to be able to solder, use basic electronics related hand tools, and have great troubleshooting skills. Key responsibilities: · 5+ years dealing with five or more of the following: · Wiring/soldering of prototype electronic equipment, both discretely wired and PC board based. · Reading, interpreting, modifying, and creating electrical schematic and wiring diagrams · Component level test and troubleshooting (IC amplifier chips, transistors, passives, and magnetics) · Electronics systems and equipment repair (amplifiers, power supplies, signal conditioning, filters) · Electromechanical, mechanical, or electromagnetic systems hands-on experience · Hands-on test and troubleshooting of custom, specific purpose-built electronic test equipment · Use of schematic capture/Spice tools for basic circuit design/troubleshooting · Handle vacuum pumps and plumbing Required Qualifications: · Knowledge of AC, as DC circuitry and components · Knowledge of Circuit phase shifting · Knowledge of AC impedance, AC power calculations · Can interpret and digest technical specifications and procedures · Electrical schematic and wiring diagram reading · Soldering · Use of basic electronics/mechanical hand tools; wire cutters, strippers, de-soldering tools, solder-wick, power drill, Taps, Dyes · Use of basic electrical test equipment operation skills, e.g.; DVM, megger, oscilloscope, signal generator, timers · Knowledge of servers and stepper motos and control systems · Basic mechanical instrument skills, e.g.; micrometers, calipers, dial indicators, precision levels · Computer literacy (Word, Excel, etc.) Preferred Qualifications: · Advanced test equipment operation skills, e.g.; spectrum analyzer, distortion meter, EMI analysis equipment · Microcontroller/microprocessor based digital and/or mixed signal circuit and system familiarity · Magnetic circuit familiarity · Knowledge of environmental testing (temperature, shock, vibration) · Ability to program environmental test chambers and/or vibration tables · An outstanding, can-do attitude willing to go above and beyond the normal · Familiarity with Lathes and Vertical Mills · Familiarity with DAQ’s and Labview/Dasy Lab programs · Knowledge of industrial wiring polyphase power systems · Experience with pressurized gasses · Knowledge of 100th edition handbook of DOE Engineering Fundamentals Course Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Maintain construction inspection and testing related documentation as necessary; Qualifications and Skills: • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred, • B.S. or Associate degree in Engineering, Engineering Technology, and/or Building/Construction Science preferred but not required. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job DescriptionFire Alarm Systems Expert – Lead Life Safety Installations for Commercial , Multi Family Residential and Retail Projects Job Overview: Company: Empire Electric Maintenance Salary/Pay Rate: $34-40+ per hour + Performance Bonus. Location: Long Island, NY and surrounding regions Job/Employment Type: Full Time. Schedule: Monday - Friday. Project Scope: Residential & Commercial Fire Alarm Mandatory Licenses & Certifications: Valid Driver's License. The Opportunity: You will serve as a technical expert in life-safety systems, ensuring the seamless installation and maintenance of critical fire alarm infrastructure. This role offers the chance to work on high-profile residential, commercial, and multi-family projects where your technical precision directly protects lives and property. How You Will Make an Impact: Execute the installation and programming of fire alarm control panels and field devices. Perform comprehensive testing and commissioning of systems to ensure full code compliance. Diagnose and repair complex circuit faults and hardware issues across diverse system types. Interpret electrical blueprints and fire safety schematics to route wiring efficiently. Conduct routine inspections and preventive maintenance to guarantee system reliability. Document technical findings and test results accurately for project compliance records. Maintain a high standard of site safety while interacting professionally with clients. Required Qualifications & Experience: High school diploma or GED. 3–5+ years of hands-on experience in fire alarm system installation. Proficiency with power tools, diagnostic equipment, and multi-meters. Valid driver's license and a history of safe vehicle operation. Strong understanding of NEC and local fire codes. Preferred Qualifications & Experience: NICET Level I or II certification in Fire Alarm Systems. Experience with specialized commercial control systems and government-sector projects. Completion of a formal electrical or fire alarm apprenticeship program. New York State Fire Alarm installer license is a plus Compensation & Benefits: Weekly Pay Cycle. Competitive Year-End Bonus. Paid Time Off including Vacation, Sick Leave, and Holidays. Paid Parental Leave. Paid Training and Professional Certifications. Tool Replacement Program. Company Uniforms Provided. Retirement Savings Plan. About Us: Empire Electric Maintenance is a dynamic electrical contractor known for delivering precision and professionalism across Long Island. We provide a people-first culture that invests in your development, rewards your initiative, and supports your long-term career growth. Learn more at www.empireelectric.co Empire Electric Maintenance is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job DescriptionFST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. We have extensive experience working on healthcare facility projects, ensuring that critical systems operate reliably and efficiently to support patient care and safety. For this position of Commissioning Field Engineer II on offer includes an excellent salary and benefits package. About the Job: A Field Engineer II reports directly to his or her Team Leader and to the team’s Project Engineers, and is directly responsible for the execution of field and office assignments as directed. Essential Functions Field Engineer must have general knowledge of the following topics: Refrigeration, HVAC, Steam management and distribution systems, pumps, fans, motors, chillers, boilers, air ventilation balancing systems, BMS systems and VAV. Field Engineer holds the following responsibilities: • Site Inspections and reports., • Equipment Testing., • Submittal Review and preparation of comments, • Document and Specification reviews and updates, • Create and execute commissioning checklists for the respective equipment and systems as directed by the team leader, • Collection and tabulation of field data using FST testing equipment, • Preparation and writing of reports., • Proper use of FST test equipment including maintenance, cleaning and reporting damages to their respective Team Leader, • Assist in executing performance test requirements., • Individual Time and Expense management., • Any special projects as requiredRequirements:, • Bachelor’s Degree in Mechanical/ Electrical Engineering, minimum 1-3 years of experience., • Must be a self-starter and capable of working independently or in a team environment., • Must possess a strong desire to learn and participate in the company developmental training program, • Trade Professional affiliation, a plus., • Proficiency with Microsoft products (Word, Excel, Power Point, etc.)Technical writing skills a plus, • Strong ability to work in changing environment and adapt to varying working environments., • Must be able to lift at least 30 pounds and climbing ladders Pay range $75k-$90k based on experience. FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR Kbs1DJDIMm

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: In coordination with Project Management and Supervisors, the incumbent will be responsible for providing the day-to-day oversight of department staff, repairs and maintenance, as well as providing operational, commercial and personnel leadership to the plant shift repair and maintenance teams to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Decision-making responsibility for all repairs and maintenance related to the Treatment Plant, equipment, and systems., • Oversees/conducts the repairs and maintenance of the equipment related to the Treatment Plant and systems., • Supervises/delegates/oversees facility’s repair and maintenance teams and direct reports., • Assists Project Management with inventory/cost controls, financial and budgeting requirements., • Assists Project Management with setup and maintenance of operations, maintenance, and safety programs., • Assists Project Management with all efforts related to Contract Compliance., • Assists Project Management to develop a safety culture of focus and engagement at the project to achieve EH&S excellence., • Assists Project Management with compliance with Business Systems, policies and procedures., • Assists Project Management with all efforts related to project/corporate and regulatory environmental, health and safety policies and procedures., • Work closely with client/customer, vendors and contractors ensuring professional, courteous, prompt service and satisfaction., • Manage equipment, materials and supplies purchasing and inventory., • Responsible for Department’s Corporate and Regulatory EH&S compliance., • Work with other plant Departments, Engineering, and Contractors to coordinate projects., • Manage, evaluate, schedule, and develop the repair and maintenance staff and always ensure adequate staffing., • Provides leadership and directing in response to alarms and abnormal conditions and lead emergency response actions., • Independently evaluates and/or supervises the evaluation of the operation, maintenance and performance of wastewater treatment facilities, processes, systems, and equipment., • Reviews, approves, and supervises implementation of recommended improvements including analyzing and optimizing existing system designs and operating parameters, supervising performance testing and troubleshooting and resolving complex operational, equipment and instrumentation problems., • Reviews designs and constructed facilities and makes and approves recommendations for operational improvements., • Participate in the development and compliance of operating policies ensuring compliance to all environmental and safety rules., • Complete reports which document plant status equipment availability and operating data. Collect data on unplanned outages and make recommendations to minimize the probability of similar events., • Oversee internal work permits to ensure compliance with procedures., • Perform functions utilizing the approved Lock Out/Tag Out systems to help ensure that safe systems are always in place., • Ensures all equipment and processes are well maintained and functioning properly., • Oversee/Perform cleanup and housekeeping tasks for work area, tools, equipment, facilities, and grounds., • Maintain proper maintenance documents and records., • Ensure work is performed in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures., • Work weekends, holidays, and be on-call on a rotating basis/schedule. Respond to emergencies, work additional hours to complete required tasks as/and when needed., • Operate company and client owned vehicles., • Proficient in the operation of project large/powered maintenance tools and equipment., • Proficient in the operation of project heavy equipment, dump trucks, backhoe, loader, and bulldozer., • Proficient in the operation and use of various hand and power tools., • Carries out other duties as assigned. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbent may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents, and vibrations., • Incumbent may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, and ladder/scaffolding, below ground and may be exposed to water and other liquid materials.Qualifications Education/Experience/Background: High School Diploma/GED is required. Advanced/Upper-Level 5+ years’ experience in Industrial or Commercial facilities repairs and maintenance. Experience in related trade positions. Knowledge/Skills/Abilities: • No physical restrictions that would prevent them from performing physical labor., • Excellent reading, math, writing, scientific, and verbal communication skills., • Excellent organizational, scheduling, and prioritizing skills and abilities., • Ability to read and interpret data from maps, engineering drawings, blueprints, gauges and graphs., • Ability to understand/execute written and oral instructions, read/understand complex technical instructions., • Ability to interpret service manuals and drawings and write SOPs., • Excellent troubleshooting/problem solving skills, provides input for corrective actions and implements corrective actions as needed., • Proficient in Windows, MS Office Suite, Google Workspace OPS, EAM & CMMS, and other computer-based systems., • Knowledge of computerized PLC/SCADA systems, DCS control systems, computerized operating data acquisition and historical trending systems pre., • Knowledge of normal and abnormal process and equipment conditions and capable of taking appropriate, safe actions., • Ability to maintain and repair equipment, have an excellent mechanical aptitude., • Ability to operated complex controls, processes, and equipment., • Knowledge of the operation, repairs and maintenance of power plant diesel electric generating equipment and related equipment., • Knowledge of wastewater treatment plant processes, equipment, and systems preferred., • Knowledge of facility HVAC systems and equipment., • Knowledge of proper Environmental, Health and Safety policies, procedures, and requirements., • Must be capable of being assigned in responsible charge of the facility with the ability to react to unplanned events., • Must have the ability to maintain effective working relations with management, supervisors, and staff., • Must have the ability to make decisions independently., • Proven ability to successfully manage time and prioritize work., • Must be able to communicate well with individuals at all skill, knowledge, and experience levels., • Must be able to lead by example, train, and mentor all staff and team support personnel., • Must have the ability to lead department/team effectively in all situations under any conditions., • Must be able to work closely with local contractors and vendors., • Must be able to work as a team in a teamwork-oriented environment. Required Certification/Licenses/Training: • Valid NYS Driver’s license and the ability to meet risk management guidelines, • Commercial Driver's License is desirable. Physical Requirements: • While performing the duties of this Job, the employee is regularly required to talk or hear., • The employee is frequently required to stand; walk; sit; use hand to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell., • The employee must frequently lift and/or move up to 50 pounds., • Specific vision abilities required by this include close vision and distance vision. Additional Information Pay Range: $105000 to $120000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionDescription: The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: • Review electrical one-lines, wiring diagrams, control schematics, and submittals to ensure proper field execution., • Support installation teams in identifying scope gaps, constructability issues, and technical discrepancies., • Conduct site visits to monitor installation progress and document deficiencies. Generator Commissioning & Startup: • Develop and execute pre-functional and functional startup checklists., • Lead commissioning of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • Automatic Transfer Switches (ATS), • Load banks and associated controls, • Document commissioning results and provide turnover packages. Troubleshooting & Technical Support: • Diagnose and resolve complex electrical, mechanical, and control-related issues during startup and post-installation., • Support Field Service Technicians with advanced troubleshooting., • Analyze generator performance data to identify reliability concerns., • Assist in root cause analysis of system failures. Controls & Integration: • Support configuration and testing of:, • Generator controllers, • Paralleling logic and synchronization systems, • Remote monitoring systems, • Ensure proper integration of generators into facility electrical infrastructure. Customer Interface & Training: • Serve as the technical lead during startup and commissioning., • Provide customer training on system operation, emergency procedures, and maintenance requirements., • Deliver clear commissioning documentation and test reports., • Ensure smooth transition from installation to service support. Qualifications: • Equivalent field experience considered., • Experience in industrial generator systems, power distribution, or mission-critical backup power environments., • Strong knowledge of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • ATS systems, • Load bank testing, • Engine controls and protection systems, • Working knowledge of NEC, NFPA 110, OSHA standards., • Proven ability to troubleshoot complex power systems in live environments., • Strong communication and leadership skills in field settings., • Valid driver’s license required. Travel & Working Conditions: • Significant travel within Kinsley’s service territory, • Work performed in hospitals, data centers, industrial facilities, utilities, and construction environments., • Exposure to energized electrical systems, mechanical equipment, and outdoor conditions., • Ability to lift up to 100 lbs and work in physically demanding environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job DescriptionElectrical Engineer, Manufacturing, Aerospace, Pharma, Engineering Overview We are seeking High Voltage Electrical Engineers at the Junior, Mid-Level, and Senior levels to support the design, analysis, and maintenance of high-voltage power systems. These roles focus on ensuring the safe, reliable, and efficient operation of electrical infrastructure across transmission, distribution, and industrial environments. This position requires strong technical expertise in power systems, safety protocols, troubleshooting, and project execution, along with the ability to collaborate across engineering and operations teams. Key Responsibilities • Design, develop, and support high-voltage systems including transformers, switchgear, substations, and transmission/distribution networks, • Perform power system analysis, including load flow, short circuit, and arc flash studies, • Conduct inspections, testing, and preventative maintenance on high-voltage equipment to ensure reliability and safety, • Troubleshoot and diagnose electrical faults, implementing root cause analysis and corrective actions, • Support commissioning, testing, and ongoing system operation and maintenance, • Ensure compliance with electrical codes, safety standards, and regulatory requirements, • Collaborate cross-functionally with engineering teams, field personnel, contractors, and clients, • Prepare technical documentation including drawings, specifications, reports, and system models, • Support project planning, scheduling, and execution across multiple initiativesTechnical Skills Required, • Power system analysis and modeling (load flow, short circuit, arc flash), • High-voltage equipment design, testing, and maintenance, • Protection and control systems, • Electrical system troubleshooting and fault diagnostics, • Experience with industry tools (ETAP, SKM, PSCAD, or similar), • Electrical design, schematics, and CAD tools, • Knowledge of electrical safety standards, codes, and regulatory complianceCore Competencies, • Strong analytical and problem-solving capabilities, • Ability to manage multiple projects and priorities in fast-paced environments, • Effective communication with technical and non-technical stakeholders, • Strong attention to detail with a focus on safety and compliance, • Ability to work independently and collaboratively across teams, • Project management and planning skillsJunior High Voltage Electrical Engineer (0-3 Years) Responsibilities • Assist with system design, analysis, and documentation under supervision, • Support testing, inspections, and commissioning activities, • Perform basic calculations, modeling, and data analysis, • Assist in troubleshooting and field support activitiesRequirements, • Bachelor's degree in Electrical Engineering or related field, • Exposure to power systems, circuit analysis, or electrical design, • Basic understanding of electrical safety standards and compliance practices, • Familiarity with CAD or power system analysis tools preferredMid-Level High Voltage Electrical Engineer (3-8 Years) Responsibilities • Perform independent power system design, analysis, and equipment selection, • Conduct load flow, short circuit, and reliability studies, • Lead portions of projects including technical execution and deliverables, • Support commissioning, testing, and field troubleshooting, • Interface with clients, vendors, and internal stakeholdersRequirements, • Bachelor's degree in Electrical Engineering (Master's preferred), • 3-8 years of experience in power systems, utilities, or high-voltage environments, • Strong understanding of transmission, distribution, or substation systems, • Experience with system modeling tools (ETAP, SKM, PSCAD, or similar), • Knowledge of electrical codes, safety standards, and compliance requirementsSenior High Voltage Electrical Engineer (8+ Years) Responsibilities • Lead complex high-voltage engineering projects from concept through execution, • Perform advanced system studies (load flow, fault analysis, protection coordination, arc flash), • Mentor junior and mid-level engineers and provide technical oversight, • Establish engineering standards, best practices, and design methodologies, • Act as subject matter expert for power systems and high-voltage infrastructure, • Support business development, proposals, and client strategyRequirements, • Bachelor's degree in Electrical Engineering (Master's preferred), • 8+ years of experience in high-voltage or power systems engineering, • Deep expertise in substations, transmission, and distribution systems, • Strong experience in system analysis, design, and commissioning, • Professional Engineer (PE) license strongly preferred, • Demonstrated leadership and project management experienceAdditional Details, • Combination of office and field work (substations, plants, job sites), • Travel may be required depending on project scope, • Compensation aligned with experience levelIn accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $80k- $140k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $80,000.00 to $140,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Based in Westbury, NY, the Protection and Controls Controller will have responsibility for accurate, timely, transparent financial accounting, reporting and internal controls over financial reporting for the Electro Industries and Beckwith businesses, collectively Protection and Controls. This position will oversee the monthly closing cycle across Protection and Controls and will be responsible to interface regularly with the HUS Group finance and controllership leaders to articulate results with clarity and transparency and maintain a strong controls environment. The Protection and Controls Controller is responsible for the SOX 404 internal control environment within the Protection and Controls business unit and must collaborate with the HUS Group as well as the Corporate Controller's Team to ensure proper SOX 404 compliance and continuous improvement in this critical area. This high-profile role will also serve as a key interface between the Hubbell Utility Solutions Controllership team and Finance leadership teams, to ensure objectives are met and internal customer requirements are satisfied on a regular basis. The Protection and Controls Controller will be responsible to partner with FP&A team and other functional areas of the business to ensure the delivery of value-added business analysis and meaningful financial and operational metrics that lead to insightful, accurate, timely business decision-making. This position is also responsible for monitoring, controlling, analyzing and reporting on all restructuring initiatives, including project economics and savings validation. In addition, this role is required to support acquisition integration, particularly finance integration initiatives and activities, and for delivering SOX 404 compliance for newly acquired businesses. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $150,000 - $175,000 annually and also offers a competitive benefits package. #LI-AO1 • Principally responsible for accurate, timely, transparent financial accounting and reporting in accordance with Hubbell standards, Policies & Procedures, U.S. GAAP and required timelines., • Along with HUS VPF, this position is the key finance leader responsible for SOX 404 compliance and for the initial and ongoing design and operational effectiveness of all internal controls over financial reporting., • Provide strong leadership, oversight, supervision and guidance to Protection and Controls financial accounting, reporting and control team and ensure timely accurate delivery of all monthly, quarterly and annual financial information, including balance sheets, income statements, cash flows and other financial analysis, key metrics and operating results., • Continuous oversight and maintenance of accurate balance sheets, income statements, and statements of cash flows for the Protection and Controls legal entities and ensure all balance sheet accounts are fully supported each month and properly reconciled in accordance with company Policy & Procedures and in accordance with Blackline standards on a monthly basis., • Responsible to deliver robust and insightful Onestream-based balance sheet fluctuation analysis for Protection and Controls., • Champion for ASC 606, including oversight of Revenue controls and involvement with the reviews of all significant revenue contracts with customers to ensure appropriate revenue recognition in accordance with Hubbell Policy & Procedure and in accordance with ASC 606., • Monthly oversight of all key reserves (Warranty, E&O, Contra-A/R, inventory shrink, restructuring, etc) include ongoing assessments of warranty activity and reserves., • Oversight of equipment capitalization, depreciation, and ongoing impairment assessments., • Ensure the company operates to high standards of corporate governance and follows all financial and regulatory requirements of a U.S. public company., • Bachelor's degree in Accounting is required, CPA or CMA preferred, • 5-7 of progressive experience in Controllership activity, with at least 2 years in a leadership role., • Ability to motivate, energize, manage, mentor and develop performance of staff., • Ability to lead organizational changes with accounting staff., • Responsible for on-going compliance with and maintenance of the Signature Authority Matrix, as well as training and ongoing support in this critical area., • Collaborate with HUS Controller's Group and provide annual support for impairment testing and definite lived intangible asset testing., • Consult regularly with the HUS Controller's group and provide strong technical accounting and reporting support to Protection and Controls accounting professionals that execute monthly, quarterly and year-end financial closing and reporting process., • Serve as accounting policy champion within Protection and Controls and ensure proper compliance, training, roll-out, maintenance, and also serve on Corporate Finance Policy sub team to represent Protection and Controls., • Oversee and manage general accounting, cost accounting function, including inventory and fixed asset accounting., • Oversee quality and accuracy of all work performed by OHF in support of Protection and Controls (A/R, Accounting, A/R, T&E, Credit, etc)., • Ensure that the financial reporting processes are in accordance with U.S. GAAP and the Company's Accounting Policies & Procedures., • Maintain appropriate internal controls throughout Protection and Controls companies to adequately safeguard the assets of the company and to identify and address potential risks in a timely manner., • Support complex accounting matters that impact the business, partnering with HUS Segment Controller and Power Brands Controller as well as the Corporate Controller's team as necessary, and support special projects as needed by senior management., • Partner with IT to ensure all systems impacting financial reporting are SOX 404 compliant (e.g. User access reviews, Segregation of Duties, system configuration, etc). Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Manager I Test Engineering is responsible for overseeing the testing processes and activities within the test engineering department. This position involves managing a team of test engineers and technicians, developing, and implementing test strategies, and ensuring that products meet quality and performance standards. The Manager I Test Engineering collaborates with cross-functional teams to improve testing methodologies and deliver high-quality products while meeting project timelines and budget constraints. (Electro Industries is owned and operated by Hubbell Incoporated but operates under the Electro Industries /Guagetech (EIG) name). Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $120,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 • Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by:, • Effectively coaching and professionally developing a team of Test Engineers/ Technicians that design and maintain electromechanical test fixtures utilizing hardware and software such as C#. Regularly updating training needs and establishing a program to keep the skills of the team current, regular, and effective., • Implementing and maintaining the quality requirements in the manufacturing/repair/testing process., • Designing and supervising the construction of fixtures, jigs used to test the functions of Printed Circuit Boards and the calibration of finished Power Meters used for measuring power quality and consumption., • The role requires knowledge of designing test fixtures that ulitize hardware and software (C#) to test functionality of PCB's and Meters with tools such Radian RD-20 and RD-23, Fluke 5080A Calibratior and similar electronic test equipment., • Implementing and maintaining the quality requirements in the manufacturing/repair/testing process., • Ensuring compliance with all safety, environmental and quality practices and procedures as outlined in organizational/departmental guidelines and SOPs as well as applicable federal, state, and local regulations., • Scheduling, assigning, and supervising/constructing work projects assigned to the Model Shop and Test Lab., • Coordinating the construction of stereolithography models to achieve maximum utilization of SLA equipment., • Interfacing and supporting offsite PCB vendors that are utilizing our test equipment when building PCB for EIG., • Selecting and scheduling machines and equipment for repairs or overhaul to maintain accuracy and reliability., • Maintaining records and files of test reports, programs for CNC, SLA models, time sheets, work sheets, vacation schedules, and all relevant information to maintain good records. Maintaining inventory of all tools and materials., • Bachelor's Degree in ElectricalEngineering with some Computer Science knowledge, • 6-10 years of experience in managing engineering in areas of electronic, electro mechanical fixtures, finishing, assembly, and testing environment (required), • Experience as a Supervisor or Foreman, • Ability to set up and operate all machine shop equipment., • A working knowledge of programming, set up, and running of CNC machinery, • Experience with software including C# and VB6, Python, Altium, Solidworks, CAD software., • Experience in building maintenance services and environmental training Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Embedded Firmware Test Engineer coordinates the activities of a group of Lab Technicians engaging in the testing of wiring devices and components thereof and works independently to oversee the tests and ensure tests are being completed. The Test Engineer designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. #LI-CH1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assisting with the scheduling of lab assignments and equipment maintenance to achieve efficient utilization of the Test Lab facilities., • Supporting certification agency representatives in the inspection and testing of wiring devices and their associated products., • Assisting with the design and devising of test procedures for new products, including the designing of any related test apparatus., • Reviewing and substantiating data, measurements and calculations to the satisfaction of both internal and outside agency representatives., • Setting up using standard procedures with Lab Techs to conduct testing of wiring devices and enclosures etc., • Training new Lab Technicians., • Setting up and operating all components in the high-power electrical test circuits. This includes components such as step-down transformer and its secondary taps, resistive and inductive load banks, secondary protective systems, and endurance machinery. Bachelor's Degree in Electrical Engineering or a related field (required) 3-6 years of experience in test and measurement environment (required) Ability to read complex blueprints and schematics to troubleshoot and repair Test Lab equipment. Working knowledge of applicable requirements of regulatory bodies such as U.L., CSA and the National Electrical Code. Experience with test and measurement equipment and methodologies for electrical systems Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Sustaining Engineer is responsible for leading and managing the design, development, and implementation of electronic and embedded systems. This role involves utilizing extensive expertise and leadership skills, driving innovation, ensuring compliance with industry standards, and providing mentorship to junior team members, contributing to the success and advancement of complex engineering projects within Hubbell. The Sustaining Engineer may also review vendor capability to support product development. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $130,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Participating in the development of multiple products simultaneously. Taking on a lead role for selected development projects, managing the NPD process from design definition through design capture and verification to the hand-off to production., • Leading and participating in project reviews and in requirement gathering meetings with sales/marketing and systems engineering groups., • Being responsible for design flow from architecture through prototype testing and production documentation. This includes circuit design, component selection and evaluation, hardware verification and validation of new products., • Performing final design reviews on all circuits and board designs, including mechanical aspects, needed to be released for prototyping and for production., • Guiding creation of hardware bring-up and production test procedures and of plans to test/validate new designs. Assisting with the design verification and validation to ensure that the completed design meets the requirements., • Performing product sustaining activities for addressing hardware related field issues as needed. Bachelor of Science in Electrical or Computer Engineering, Computer Science, or equivalent degree (required) Proficiency with a proven track record in working with designs utilizing microprocessors, microcontrollers, digital signal processors, field-programmable gate arrays, high-speed A/D-D/A conversion, and power conversion (required) 6-10 years of embedded hardware design experience on industrial products Proficiency in CAD software and other relevant tools for electrical design, analysis, and simulation (required) Experience with test equipment and measurement methodologies for electrical systems Understanding design verification/validation and regulatory compliance testing (UL, CSA, FCC). Experience with C/C++ and Python preferred. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Description ENV Services, Inc has been a nationally respected leader in calibration, certification and decontamination services. We are seeking a Field Service Technician to provide testing, maintenance and repair of HEPA filtered devices, including Biological Safety Cabinets, Clean Benches, and Clean rooms. Responsibilities • Using our test equipment, you will learn to test, troubleshoot, diagnose and repair equipment at customer locations., • Training provided, both in classroom and mentorship with experienced technicians., • Good troubleshooting skills are required to assess, diagnose and repair the equipment., • Provide required maintenance for clients in a safe manner and communicate with other technicians to find solutions for service issues., • Prepare paperwork at the completion of each job to record time, repairs completed and parts installed., • Technician must be able to work independently without supervision and represent the company in a professional manner with a neat appearance at all times., • A company vehicle is provided, overnight travel can be anticipated. Qualifications • Candidates should have a sound mechanical and electrical aptitude and troubleshooting skills as well as strong computer and organizational skills., • Excellent customer contact skills., • Technician must have a valid state driver's license with clean driving record to operate company vehicles, ability to pass a background check, customer drug testing and safety training., • Calibration or HVAC experience in the pharmaceutical and biomedical fields are highly desired. Position Requirements • Physical ability to lift 50 lbs. and work in various positions (bending, kneeling, sitting, standing)., • Must be willing to drive for long trips and travel overnight., • Work from a six foot ladder. Benefits • Company vehicle and fuel card, • Health, Vision, and Dental Insurance, • Company paid Life and Accidental Death Insurance, • Short and Long term disability, • 401k plan with matching, • Vacation, sick, personal days ENV Services, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status Company DescriptionWe are a nationwide company and for over 50 years, ENV Services, Inc has been a nationally respected leader in calibration, certification and decontamination services.We are a nationwide company and for over 50 years, ENV Services, Inc has been a nationally respected leader in calibration, certification and decontamination services.

Job DescriptionDescription: Location: Central - East US / Hybrid Reports To: VP SI About GenServe GenServe, LLC is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales. We serve commercial customers across various industries throughout the United States. Headquartered in Plainview, NY—with branch offices in New Jersey, Pennsylvania, Illinois, Florida, California, and Texas—GenServe continues to accelerate its growth through organic expansion and strategic acquisitions. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and is expanding rapidly into new markets. Our robust service platform provides a one-stop shop for all commercial generator maintenance needs. Position Summary The East Coast Operations Director leads all field service, maintenance, project deployment, and customer support operations for Uninterruptible Power Supply (UPS) systems across the eastern United States. This senior leadership role is responsible for the performance, reliability, and growth of a complex multi-state service organization supporting data centers, healthcare facilities, financial institutions, government agencies, and other mission-critical environments. The Director oversees a team of field service engineers, project managers, and technical specialists, ensuring that all UPS installations, preventive maintenance programs, and emergency response activities meet the highest standards of quality, safety, and customer satisfaction. Key Responsibilities Field Service Operations & Technical Delivery • Direct all UPS field service activities across the East Coast region, including installations, commissioning, preventive maintenance (PM), corrective maintenance, and emergency response for systems ranging from small-frame single-phase units to large-scale three-phase systems (10 kVA–4+ MVA)., • Establish regional service dispatch protocols, technician routing strategies, and SLA compliance frameworks to meet contracted response time obligations (e.g., 4-hour, 8-hour, next business day)., • Oversee management of battery replacement programs, capacitor aging schedules, firmware upgrades, and load bank testing across the regional install base., • Ensure technical readiness of all field service engineers through structured training, OEM certification tracking, and competency assessments., • Coordinate with the NOC (Network Operations Center) and remote monitoring teams to proactively identify at-risk systems and dispatch field resources accordingly. People Leadership & Workforce Development • Lead, mentor, and develop a regional team of District Service Managers, Field Service Engineers (FSEs), Project Managers, and Service Coordinators., • Define staffing models and headcount plans to support regional growth, contract expansion, and seasonal demand fluctuations., • Drive a culture of technical excellence, continuous learning, and customer-first service delivery., • Manage performance cycles, talent reviews, compensation recommendations, and succession planning for key regional roles., • Partner with Talent Acquisition to recruit licensed electricians, power electronics technicians, and experienced UPS service engineers. Customer Relationship Management • Serve as the executive escalation point for major regional accounts, including Tier 1 data centers, hospital systems, utilities, and federal government clients., • Conduct executive business reviews (EBRs) with key accounts, presenting performance metrics, reliability trends, and roadmap recommendations., • Collaborate with the Sales and Account Management teams to drive service contract renewals, upsells (extended warranties, monitoring, battery programs), and new logo acquisition., • Manage customer satisfaction (CSAT/NPS) programs and drive root cause analysis and corrective actions for service failures or SLA misses. Project & Program Management • Oversee the execution of large-scale UPS installation and infrastructure upgrade projects across the East Coast, from pre-sale engineering review through commissioning and customer acceptance., • Manage project portfolios with combined contract values exceeding $50M annually, ensuring on-time, on-budget delivery., • Coordinate with internal engineering, logistics, procurement, and subcontractor networks to support complex multi-site deployments., • Lead risk identification, mitigation planning, and change order management for complex projects. Financial Performance & P&L Accountability • Own the East Coast service P&L, including revenue recognition, labor cost management, parts and materials margin, and overhead control., • Drive profitable growth through service contract expansion, T&M revenue optimization, and parts/battery sales., • Identify and execute cost efficiency initiatives without compromising safety, quality, or response times. Safety, Compliance & Quality • Enforce a rigorous electrical safety culture consistent with NFPA 70E, OSHA 1910 (General Industry), and company safety policies — including arc flash PPE protocols, lockout/tagout (LOTO) procedures, and confined space entry., • Ensure all regional operations comply with NEC, IEEE, IEC, and relevant local electrical codes, as well as environmental regulations governing battery handling and disposal (EPA/DOT)., • Lead incident investigations, near-miss reporting, and corrective action programs; report safety metrics to senior leadership monthly., • Maintain quality standards aligned with ISO 9001 or equivalent frameworks across all service and project delivery activities. Requirements: Qualifications • 10+ years of experience in UPS systems, critical power infrastructure, or power electronics field service/operations., • 5+ years in a senior operations management or multi-site leadership role with direct P&L accountability., • Deep technical knowledge of single-phase and three-phase UPS topologies (double-conversion online, line-interactive, modular), including leading OEM platforms such as Eaton, Vertiv (Liebert/Chloride), Schneider Electric (APC), ABB, and Emerson., • Demonstrated experience managing field service organizations supporting data centers, healthcare, financial, or critical government infrastructure., • Proven expertise in VRLA, Li-ion, and NiCd battery management — including capacity testing, replacement programs, and lifecycle planning., • Strong understanding of NFPA 70E electrical safety, LOTO, arc flash hazard analysis, and related compliance requirements., • Experience with service management platforms (ServiceMax, Salesforce Field Service, SAP FSM, or equivalent). Preferred Skills • Experience in the data center, utility, or healthcare power industry., • Knowledge of major UPS brands (Eaton, APC, Vertiv/Liebert, Schneider Electric)., • Ability to read one-line diagrams and technical schematics. Working Conditions • This is a national role requiring coordination across multiple time zones., • Fast-paced environment with strict deadlines.

Job Description We are currently hiring for the position of Generator Technician. As a Generator Technician, you will be responsible for installing, maintaining, and repairing generators and their related systems. Working with a variety of generator models and sizes, you will ensure their optimal performance and reliability. Your key responsibilities as a Generator Technician will include: • Installing and commissioning generators according to manufacturer guidelines and specifications, • Performing routine maintenance and inspections on generators, including oil and filter changes, fuel system inspections, and component testing, • Diagnosing and troubleshooting electrical and mechanical issues, identifying faulty components and implementing necessary repairs, • Replacing faulty parts and components, ensuring proper installation and adjustment, • Maintaining accurate records of all maintenance and repair activities, including completed work order forms and parts used, • Complying with safety regulations and protocols, ensuring a safe work environment at all times, • Work with diesel and natural gas engines, • Work with Automatic Transfer Switches Requirements • 2+ years of experience with with commercial Backup Power Generators, • Experienced with engine and generator troubleshooting, • Strong electrical and mechanical aptitude, • Ability to diagnose and troubleshoot generator issues, • Knowledge of generator safety protocols, • Excellent problem-solving and communication skills Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Company Truck, • Uniforms, • Tool Loan Policy

Job DescriptionDescription: About GenServe: GenServe is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales, primarily serving commercial customers. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and a growing presence across the U.S. Through a combination of organic growth and strategic acquisitions, GenServe is rapidly expanding its national footprint as a one-stop shop for generator solutions. Job Summary GenServe is looking for a skilled and experienced Generator Technician 2 to join our field service team. In this role, you will independently perform scheduled maintenance, diagnostics, load banks, and repairs on a wide range of standby generator systems. You’ll work with diesel, natural gas, and propane-powered generators for commercial, industrial, and municipal clients. This position is ideal for technicians with a solid foundation in power generation and a desire to continue growing their technical and leadership skills. Key Responsibilities • Perform preventative maintenance and repair services on standby generator systems., • Independently diagnose mechanical and electrical faults using appropriate tools and technical documentation., • Troubleshoot engine and generator system components include batteries, starters, alternators, fuel systems, and control panels., • Complete load bank testing and inspections to ensure generator performance., • Maintain accurate service records, inspection reports, and parts usage documentation using company systems., • Some exposure to ATS (Automatic Transfer Switches) with supervision., • Ensure all work complies with GenServe safety standards and customer site protocols., • Provide support and guidance to Gen Tech 1’s as needed., • Attend internal and external training as needed to further your knowledge and experience., • Participate in a rotating on-call schedule, including evenings, weekends, and holidays, to respond to emergency service requests and ensure timely resolution of customer issues.Requirements: Qualifications • High school diploma or GED required., • Technical training or certifications in diesel engines, generator systems, or electrical systems preferred., • Minimum of 2 years’ hands-on experience servicing commercial or industrial generator systems., • Valid driver’s license with a clean driving record., • Physically able to lift 50+ lbs and work in field/outdoor conditions., • Proficiency in using diagnostic tools, multimeters, and load banks., • Experience with major brands like Cummins, CAT, Generac, Kohler, or MTU is a plus. Skills and Competencies • Must perform all duties and responsibilities of a Level 1 Technician., • Strong mechanical and electrical troubleshooting skills., • Excellent customer service and communication abilities., • Ability to read and interpret wiring diagrams, schematics, and service manuals., • Self-motivated with strong problem-solving and organizational skills., • Commitment to safety and quality workmanship. Opportunities for Growth: Generator Technicians at GenServe are on a clear path toward becoming a Generator Technician Level 3. GenServe supports advancement through paid training, OEM certifications, and OJT. Why GenServe? • Competitive compensation and benefits, • Consistent year-round work, • Company Truck w/ Gas Card (Take Home), • Industry-leading safety and technical training, • Advancement opportunities in a growing company, • Supportive, team-oriented work culture, • Technician Appreciation Days

Job DescriptionSalary: $25-$30 Hourly Job description: Global Fueling Systems Inc. is looking forFueling Facility Wiring/Electrical Service Technicianin Long Island, New York. • Full-time, • 40 hours per week Global Fueling Systems provides sales, design, repair, and maintenance of oil and gas fluid management systems, and motor vehicle fueling systems. We are a group of fun and motivated industry professionals. We are looking for you to join our team! Please send your resume or call at 631-815-1361 to schedule an interview. Global Fueling Systems Inc. is an equal-opportunity employer. We encourage applications from all qualified individuals without regard to race, color, religion, gender, sexual orientation, age, national origin, marital status, citizenship, disability, or veteran status. What Drives Us And You Our core values arent just words they shape how we work, grow, and succeedtogether. If youre the kind of person who takes pride in doing things right and enjoys being part of a team that supports each other, this is your kind of place. • Take CARE of Each Other If youre not a team player, this isnt your place. Were a team, and weve built a culture of support, respect, and collaboration., • ECSTATIC Customers Were proud to exceed expectations with service and precision., • Radical CANDOR We value honest, clear, and respectful communication even when it's tough. If you avoid feedback or cant give it constructively, youll struggle here., • Be QUICK, But Dont HURRY We execute with accuracy and urgency, never sacrificing quality for speed., • Innovation Is at Our Core From tools to techniques, we never stop improving. If you resist change or dont want to learn, this wont be a good fit. We perform work at various types of fueling facilities: • Retail sites (service stations and convenience stores), • Private customers (trucking companies, marinas), • Municipal customers (schools, government facilities, fire departments) Fuel system components include, but are not limited to: • Fuel dispensers, • Pumps, • Controllers, • Point of Sale (POS) systems, • Printers, • Fuel Management Systems, • Sensors, • Alarm systems, • Programming, • Probes, • Tanks and Tank Hardware, • Filters, • Tank level monitors, • Leak detection equipment, • Valves, • Piping and Fluid conveying systems, • Meters & Registers, • Various electrical and mechanical equipment Do you have experience in any of the following? • Plumbing, • Electrical, • Electronic systems, • HVAC, • Mechanics Are you interested in: • Gaining experience in a new industry? We train on the job!, • Working for a stable, growing company? We have been in business for 53 years., • Learning new skills? All of our technicians are industry certified. Do you have these SKILLS/QUALIFICATIONS: • High school diploma or equivalency, • Electrical work experience in a petroleum equipment or other related industry preferred, • Low voltage experience preferred, • Good computer/tablet skills; knowledge of networking and computer hardware and software, • Programming, communication & data transfer experience preferred, • Good mechanical aptitude; able to safely operate hand tools, • A valid and clean drivers license, • Problem-solving abilities, • Excellent communications and customer service skills, • A positive attitude, project a professional tone, and provide clear concise information, • Ability to lead without constant supervision, dependable, dedicated, can-do attitude and willing to work and learn, • Must read, write, speak and understand English with exceptional analytical, communication, and interaction skills, • Willing to work overtime and on-call emergency, • Must be able to wear appropriate PPE in the facility and be able to physically perform all tasks in the field., • Excellent teamwork skills JOB RESPONSIBILITIES • Troubleshoot, inspect, repair, maintain, and install all electrical systems, alarm systems, fuel equipment wiring, fuel dispensing systems, fuel management systems and various other types of electronic equipment in fueling facility., • Make recommendations for upgrades, repairs, maintenance, etc., • Calibrate and modify systems according to site needs, • Perform repairs and preventative maintenance on electronics, computers, and fuel dispensing systems, • Remove, replace and repair electrical wiring, alarms, and sensors of the fuel and tank monitoring systems, • Perform on-site compliance inspections and testing of aboveground and underground tank, • Perform service calls as needed on an after-hours basis, • Respond to emergency calls to complete service requests in a timely manner and ensure all requests are handled in a professional manner, • Resolve warranty calls, • Select materials and parts required to complete assigned repairs., • Operate and maintain tools and equipment safely to accomplish the assigned task and Maintain an adequate supply of parts for emergency repairs, • Comprehend customer requirements and assist in diagnosis, analysis and make appropriate recommendations, with an excellent work ethic, • Completes assigned tasks quickly, completely, and consistent with guideline, • Work safely in accordance with OSHA Standards, • Perform required prerequisite work necessary to obtain and maintain certification from original equipment manufacturers, • Any other duties or responsibilities, as assigned SUPPLEMENTAL PAY • Prevailing Wage, • Emergency After-Hours On-Call Pay BENEFITS • Medical, dental, and vision insurance, • Life insurance, • 401(k), • Paid holidays, • Paid vacation, sick time/personal time off, • Employee Discount Program, • Employee Assistance Program (EAP), • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Training Please submit your resume or call 631-815-1361 to schedule an interview. You can find us at: https://services.globalfuelingsystems.com/ Global Fueling Systems is an Equal Opportunity Employer and complies with all state and federal laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, or protected veteran or disabled status and will not be discriminated against.

Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform.AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments.Experts contribute directly to how A

Min 7 years of relevant electrical design experience. Proficiency in AutoCAD, Revit, and electrical design software. Electrical Engineer for our Syosset, NY location.

We have an immediate need for a.Mechanical Engineer for our Syosset, NY.Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management,

We have an immediate need for a.Senior Mechanical Engineer for our Syosset, NY.Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff.Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction mana