Trabajos electrical testing en Seattle, WashingtonCrear alertas

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. In this role, work with a team of engineers responsible for designing standardized test equipment used on the shop floor that can be built at scale as per the factory demands for contract manufacturing as well as Kuiper factory locations, optimizing provisioning and testing time by partnering with design engineering and software teams, partner with CM site representatives and provide recommendation for design for manufacturing. In this role you will work across the org with many software and hardware teams identifying requirements, prioritizing critical efforts and providing updates to senior management and stakeholders. Key job responsibilities • Lead and conduct complex system-level analyses across multiple subsystems to evaluate design alternatives and optimize manufacturing test infrastructure architecture, • Drive technical strategy and architectural decisions for test systems, balancing performance, schedule, cost, risk, and scalability requirements, • Develop and implement processes to facilitate communication of system design/architecture with partner teams including contract manufacturers, software teams, and hardware engineering, • Lead technical risk assessments and failure mode identification for manufacturing test systems, establishing test strategies and acceptance criteria, • Derive and synthesize requirements for system efficiency, operational excellence, and user experience across the manufacturing test infrastructure, • Identify and frame needs for analyses that balance impact and feasibility, conducting trade space studies to optimize test system design, • Bachelor’s degree in Computer Science, Computer Engineering, Electrical Engineering or comparable industry experience, • 2+ years of non-internship professional experience in IT, automated test equipment (ATE) or embedded systems support, • 2+ years experience in project management skills including resource planning, managing schedules, reporting project status and prioritizing own tasks and those of other team members for multiple projects., • Experience with embedded system test rack configuration, integration and optimization, • Knowledge of hardware/software integration and validation processes, • Highly organized and autonomous, very detail oriented and willing to learn new skills, • Working knowledge of Linux and Windows operating system, • Proven track record of implementing process improvements in manufacturing environments, • Experience in communicating with users, other technical teams, and management to collect requirements, evaluate alternatives and develop processes and tools as needed to support the organization, • Experience working with contract manufacturers (CMs), • Experience programming with at least one modern language such as Python, RUST, Golang, JAVA, • Experience with embedded software deployment and provisioning processes, • Experience troubleshooting and debugging technical systems, • Experience driving technical standardization across diverse systems Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $116,300/year in our lowest geographic market up to $201,200/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Project Kuiper is Amazon’s low Earth orbit satellite broadband network. Its mission is to deliver fast, reliable internet to customers and communities around the world, and we’ve designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. The success of Kuiper depends on the quality, reliability, cost, manufacturability, throughput, and security of the products that you deliver. If you seek a fast-paced, dynamic environment; if you thrive on solving difficult problems where resolutions have high impact; and if you love the challenge of building something from scratch, then this role will be an ideal next career step. To be successful you need to be highly motivated and detail oriented while showing the highest standards of execution. Key job responsibilities • This position will work a 4x10 schedule, possible shifts: Back-Half (Wed-Sat), Day (0600-1630) or Night (1700-0330), • Lead and guide a team of Test Technicians by planning, assigning and executing daily tasks, and assisting with new member onboarding and training, • Perform functional and environmental testing, repair and troubleshooting of Kuiper phased array antennas and other critical assemblies, • Enforce high quality and safety standards for both product and personnel, • Produce daily reports on Integration phased array antenna builds, • Use precision calibrated tools – torque wrenches, multimeters, optical inspection devices, micrometers and calipers, • Read, create and interpret engineering drawings and technical documentation, • Perform work according to procedures, specifications, and test instructions, some of which may be ambiguous or incomplete in nature, • Use computer software programs for conducting tests, • Check and inspect your work, as well as others, after completion to ensure engineering and quality standards are met per the drawing and work instruction requirements, • Collaborate with manufacturing, design and test engineers to develop, document and complete activities, including continuous improvement opportunities, • Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environment Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum. A day in the life The Lead Test Technician is responsible for guiding a team of test technicians to test and troubleshoot critical spaceflight systems for the Kuiper satellite. This team will work closely with cross-functional engineering, test, quality and operations teams to deliver Kuiper production hardware at the final integration and testing level, prior to launch. This position requires skill and experience in a variety of areas, including PCBA testing and handling, mechanical assembly, avionics integration, electrical checkouts and environmental testing. You will be responsible for ensuring critical tasks to test Kuiper satellites are performed with high quality, high workmanship and safety standards, and on time. • High school diploma, GED or equivalent experience, • 4+ years experience in electrical hardware assembly, test, and/or installation, • 1+ years experience leading technicians in a manufacturing environment, • Experience in the aerospace industry, automotive industry, medical device industry, aviation, military or other high-reliability operating environment, • Experience in an ambiguous, fast-paced production environment, • Experience working with FOD, ESD sensitive hardware and clean room requirements, • Experience with forklifts, cranes and heavy equipment (including previous certifications), • Skill in operating and manipulating machinery and various hand and power tools requiring manual dexterity, • A demonstrated ability in reading/writing/creating/understanding technical drawings, work instructions, test plans and standard operating procedures, • Detailed knowledge of electrical, optical and mechanical systems, antennas, functional testing and satellite components, • Ability to use a wide variety of precision measuring and testing instruments, • Ability to work effectively in a team environment, • Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment Additional Requirements: • Willing to work all shifts, overtime and weekends as needed. Estimated shift times: 1st shift (6:00 am – 4:30 pm Sun-Wed OR Wed-Sat). Shifts may vary, depending on program needs, • Able to stand for long periods of time and perform repetitive assembly operations, • Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position, • Able to lift at least 25 lbs. unassisted, • Must be willing to travel up to 5% to different sites and for training Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ___ for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $63,400/year in our lowest geographic market up to $104,600/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ___. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Job Details Job Location SEA - Seattle, WA Position Type Full Time Salary Range $24.00 - $35.00 Hourly Job Shift Day Description Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcycle riders, kayak fishermen, police, farmers, pilots, extreme sports enthusiasts and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made in the USA, we are proud to offer a lifetime warranty on most products. Job Description As a Welder, you will be responsible for performing MIG, TIG, and/or Stick welding on metal components and assemblies. You will use a wide range of fabrication tools and equipment to ensure strong, precise welds that meet customer and company standards. Duties and Responsibilities \n • Weld components in flat, vertical, or overhead positions\n, • Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques\n, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers\n, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications\n, • May operate fabrication equipment such as CNC torch, CNC anglematic, CNC fabripunch, and other component production equipment\n, • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys\n, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding\n, • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals\n, • Clean laser beds and assist the operators and shop as needed.\n\n Qualifications Skills and Qualifications \n • 2+ years of welding experience in a fabrication or manufacturing environment.\n, • Proficiency with MIG, TIG, laser welding; Stick welding a plus.\n Benefits: \n • Employer paid Medical, Dental, Vision, and Life Insurance\n, • 69.33 hours of PTO (up to 3 weeks with tenure) with seven paid holidays\n, • 401k with up to 4% employer match\n, • Additional paid parental leave beyond state/federal offerings\n, • Quarterly catered lunch events for all employees\n NPI maintains a drug free workplace policy and conducts pre-employment testing in compliance with Washington SB 5123.

Job Details Job Location SEA - Seattle, WA Position Type Full Time Salary Range $24.00 - $35.00 Hourly Job Shift Day Description Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcycle riders, kayak fishermen, police, farmers, pilots, extreme sports enthusiasts and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made in the USA, we are proud to offer a lifetime warranty on most products. Job Description As a Welder, you will be responsible for performing MIG, TIG, and/or Stick welding on metal components and assemblies. You will use a wide range of fabrication tools and equipment to ensure strong, precise welds that meet customer and company standards. Duties and Responsibilities \n • Weld components in flat, vertical, or overhead positions\n, • Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques\n, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers\n, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications\n, • May operate fabrication equipment such as CNC torch, CNC anglematic, CNC fabripunch, and other component production equipment\n, • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys\n, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding\n, • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals\n, • Clean laser beds and assist the operators and shop as needed.\n\n Qualifications Skills and Qualifications \n • 2+ years of welding experience in a fabrication or manufacturing environment.\n, • Proficiency with MIG, TIG, laser welding; Stick welding a plus.\n Benefits: \n • Employer paid Medical, Dental, Vision, and Life Insurance\n, • 69.33 hours of PTO (up to 3 weeks with tenure) with seven paid holidays\n, • 401k with up to 4% employer match\n, • Additional paid parental leave beyond state/federal offerings\n, • Quarterly catered lunch events for all employees\n NPI maintains a drug free workplace policy and conducts pre-employment testing in compliance with Washington SB 5123.

Overview: An Evergreen Requisition is an advertisement for positions that CoolSys continuously hires throughout the year. It is a way for CoolSys to build a database of qualified, interested applicants for a particular job so that when there is a need to fill that type of role, the hiring process will be faster. By applying to an Evergreen Requisition, you are expressing your interest in that job. If there is an interest in your application, a recruiter will reach out to you. WHY COOLSYS? At CoolSys, we offer more than just a job—we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: • Competitive Compensation: $45.00- $60.00 hr., • Sign on Bonus: Up to $5,000.00 DOE, • Ongoing Education & Training: Access to state-of-the-art facilities and paid online training., • Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting., • Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing., • Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: WHY JOIN US We understand that hiring great people in the field is the foundation of everything we do. Our employee benefits packages include: • Competitive pay including a quarterly bonus plan, • Medical, Dental, Vision and Prescription coverage, • Paid vacation and holidays, • 401(K) match, • Life insurance, AD&D and long-term disability, • Tuition reimbursement, • Paid online training and state-of-the-art training facility to invest in YOUR career growth, • Opportunities available nationwide, • Employee discounts on vehicles, hotels, theme parks, select cell phone bills and so much more, • Pet Insurance The Foreman serves as Technical Lead and Crew Chief on his/her assigned projects. • Serves as Lead Technical resource on assigned projects., • Reports on job status and performance., • Controls job costs., • Develops and maintains productive relationships with peers, customers, GCs and subcontractors., • Ensures use of PPE and the application of safe behavior, including vehicle safety, by all employees., • Ensures compliance of Installation policies and procedures, including project tracking, safety, time and attendance, etc., • High school diploma, GED, or completion of trade program or technical school. College degree is a plus., • 5+ years of experience in commercial building construction or other related industry/trade,, • Knowledge of construction principles and practices, including efficient use of labor hours., • Ability to organize tasks., • Ability to use good judgment in making work assignments., • Ability to give clear instructions and guidance, as needed., • Ability to maintain project labor hours within acceptable limits and request change orders as needed., • Ability to ensure safe work practices and ensure compliance with Safety policies., • Ability to understand and follow all company policies and procedures and all applicable State and Federal laws., • Ability to work with minimal supervision., • Track record of punctuality and dependability., • Ability to use computer tools including E-Mail, Word, Project Planning Software (Projectmates), etc. Connect with us on ___ and ___. Coolsys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. Coolsys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. EMS Foreman, Electrical, EMS, Installer, Install, Installation, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, mechanical, mechanic, AC, field service, chiller, specialist, HVACR, sr, senior, specialty

Job DescriptionGroup Manager Location: Greater Seattle Area Lead with Vision. Deliver with Excellence. At Liberty Electric, we're shaping the future of public works and infrastructure across the Pacific Northwest. We're seeking an experienced Group Manager to provide leadership, strategic direction, and operational excellence across a portfolio of projects. This role is central to driving business growth, building strong teams, and ensuring we exceed contractual, financial, and client expectations. If you're a proven leader who thrives on building relationships, developing people, and delivering results-this is your opportunity to take charge. What You'll Do As a Group Manager, you'll provide leadership and oversight across all phases of the project lifecycle while ensuring Liberty's values and goals are achieved. Your responsibilities will include: * Strategic Leadership & Growth * Create and execute a business development strategy that aligns with Liberty's goals and KPIs. * Cultivate strong client relationships and identify opportunities for repeat and new business wins. * Represent Liberty as a thought leader in the community and industry, serving as the face of the organization. * Operational Excellence * Provide strategic direction to project teams, ensuring alignment with broader organizational plans. * Oversee project execution across cost, schedule, staffing, and quality benchmarks. * Serve as the escalation point for project, financial, contractual, and client relationship risks. * Lead Liberty's safety culture, demonstrating commitment to an injury-free environment. * Team Building & Leadership * Build, coach, and inspire high-performing teams to fulfill contracts and deliver results. * Ensure staffing levels are aligned with commitments, and adapt resources as needed. * Mentor team members to support career growth and leadership development. * Business & Financial Management * Negotiate contracts, scopes, and pricing with clients and subcontractors. * Develop and execute subcontractor strategies to ensure long-term partnerships and project success. * Manage budgets, financial performance, and risk to maximize profitability and future work. * Conduct estimating, productivity analysis, and prepare financial projections. What We're Looking For * Experience: * 10+ years in construction management. * 5+ years in personnel management, with proven success leading multiple large/complex projects. * Education/Certifications: * Construction Management degree or equivalent experience. * PMP Certification preferred. * PgMP Certification or ability to obtain within 90 days. * OSHA 30 certification. * Skills & Qualities: * Strong financial and analytical acumen. * Proficiency in Microsoft Suite, project management, and accounting software. * Exceptional communication and presentation skills. * Track record of delivering results through leadership, collaboration, and strategic decision-making. * Ability to manage risk, build relationships, and generate new opportunities. Benefits That Work for You * Health Insurance, 100% Paid: Liberty pays the premiums for medical, dental, and vision coverage. * Retirement & Ownership: Stock options, 401(k) with 4% match, and profit sharing. * Time Off That Fits Your Life: Unlimited vacation policy plus 8 paid holidays. * Growth & Leadership: Career advancement opportunities and leadership coaching from industry-leading psychologists. * Learning Support: Educational assistance after probationary period. Why Liberty? At Liberty Electric, we believe in ownership, leadership, and growth. As a union electrical subcontractor, we are committed to building world-class infrastructure while empowering our people. We invest heavily in leadership development, coaching, and career advancement because we know that great leaders build great teams, and great teams deliver great projects. ???? Apply today to lead with vision, inspire high-performing teams, and help build the future of the Pacific Northwest with Liberty Electric. Liberty Electric is an equal opportunity employer. We are a drug and alcohol-free workplace. All new hires and employees are subject to drug testing in accordance with company policy.

Job Details Job Location SEA - Seattle, WA Position Type Full Time Salary Range $24.00 - $35.00 Hourly Job Shift Day Description Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcycle riders, kayak fishermen, police, farmers, pilots, extreme sports enthusiasts and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made in the USA, we are proud to offer a lifetime warranty on most products. Job Description As a Welder, you will be responsible for performing MIG, TIG, and/or Stick welding on metal components and assemblies. You will use a wide range of fabrication tools and equipment to ensure strong, precise welds that meet customer and company standards. Duties and Responsibilities \n • Weld components in flat, vertical, or overhead positions\n, • Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques\n, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers\n, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications\n, • May operate fabrication equipment such as CNC torch, CNC anglematic, CNC fabripunch, and other component production equipment\n, • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys\n, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding\n, • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals\n, • Clean laser beds and assist the operators and shop as needed.\n\n Qualifications Skills and Qualifications \n • 2+ years of welding experience in a fabrication or manufacturing environment.\n, • Proficiency with MIG, TIG, laser welding; Stick welding a plus.\n Benefits: \n • Employer paid Medical, Dental, Vision, and Life Insurance\n, • 69.33 hours of PTO (up to 3 weeks with tenure) with seven paid holidays\n, • 401k with up to 4% employer match\n, • Additional paid parental leave beyond state/federal offerings\n, • Quarterly catered lunch events for all employees\n NPI maintains a drug free workplace policy and conducts pre-employment testing in compliance with Washington SB 5123.

Job Description PDS Defense, Inc. is seeking a Electrical Engineer, in Kirkland, WA Pay Rate: $90- $125K DOE Job Description: • Design, analysis, programming, and documentation of electrical and control systems using PC's and PLC's for the industrial and municipal markets. Applications include electrical distribution, and machine and process control., • Communications with customers, suppliers, and other engineering professionals., • Preparation of Operator and Maintenance Manuals for delivered equipment and systems., • Generation of engineering drawings using AutoCAD application software., • Providing guidance to electrical technicians during electrical equipment fabrication activity., • Performance of equipment start-up testing at the customer's on-site location. EDUCATION / EXPERIENCE: • Bachelor of Science in Electrical Engineering., • Specific knowledge of automated control systems, AC and DC motors, computer and PLC programming, electrical power distribution, digital and analog circuits, and technical writing., • Minimum 5 years of control and automation experience Company DescriptionPDS Defense offers talent acquisition and SOW/Engineering solutions in the aerospace, defense, machinery, communications, energy, technology and service industries. We’re focused on developing strong, lasting relationships with our customers to deliver creative and comprehensive solutions that support their talent acquisition strategies. Our flexible business model allows us to provide not only solutions for contract and direct opportunities, but also offload engineering design services, SOW projects, and more.PDS Defense offers talent acquisition and SOW/Engineering solutions in the aerospace, defense, machinery, communications, energy, technology and service industries.\r\n\r\nWe’re focused on developing strong, lasting relationships with our customers to deliver creative and comprehensive solutions that support their talent acquisition strategies. Our flexible business model allows us to provide not only solutions for contract and direct opportunities, but also offload engineering design services, SOW projects, and more.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Software Engineering Manager, Backend at Carbon Robotics, you will work alongside your software, mechanical and electrical peers to build AI and robotics products. In particular, you will be guiding a team to design and implement services running in our cloud. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Manage and lead a team of engineers to build and scale cloud and on-prem infrastructure software to support our revolutionary Laser Weeding solution and future products., • Collaborate with other engineering teams and product managers across multiple disciplines., • Resolve conflicts within the team and across collaboration interfaces, • Oversee the software development lifecycle, including planning, design, implementation, testing, and deployment., • Manage resources and priorities so projects are successfully delivered on time., • Mentor, grow and provide technical guidance to engineers on the team., • Communicate deliverables effectively to the broader organization., • Experience managing and leading a software engineering team that has built and implemented services and distributed systems on machine and in the cloud., • Capable of operating as a Lead Software Engineer in your respective expertise., • Solid understanding of distributed systems, scalable cloud services and infrastructure tooling., • Excellent verbal and written communication skills and a desire to work in multidisciplinary organizations., • Lead by supporting an in office culture where collaboration drives innovation., • Field visits to Farms are a must. Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity – paying employees equitably for similar work. Offers are dependent on someone experience and may be outside of the published range when appropriate. If your skills are above the posted range... Apply! We want to hear from you! Carbon Robotics' base salary pay range:$195,000—$217,500 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Sr. Mechanical Engineer, Hybrid Powertrain at Carbon Robotics, you will play a key role in developing the mechanical systems that enable our diesel-electric platform. You will immediately bring your significant experience integrating powertrain systems into vehicles and developing supporting systems such as gearboxes, generators, cooling systems, fuel management systems, and drivetrain components to revolutionize agricultural traction systems. What you'll do: • Define and select core off the shelf and semi-custom components of the diesel electric powertrain including diesel engine, generator, ECUs, start/standby batteries, and more., • Design/integrate complete diesel electric drivetrain systems including motor housings, gearboxes, and axle assemblies for high-torque agricultural applications, • Architect thermal management solutions for motors, inverters, and battery systems operating in extreme agricultural environments, • Develop mounting structures and vibration isolation systems for diesel and electric motors ranging including traction drives to auxiliary pumps., • Design/integrate power transmission components including couplings, driveshafts, and reduction gearboxes for 100+ kW electric motors, • Analyze and optimize powertrain efficiency through gear ratio selection, bearing design, and lubrication systems, • Lead durability testing including shock/vibration, thermal cycling, and accelerated life testing of drivetrain components, • 8-15 years experience designing automotive or heavy equipment powertrains, preferably with electric or hybrid systems, • High proficiency in CAD (SolidWorks) and FEA (ANSYS) tools for structural, thermal, and vibration analysis, • Extensive experience with rotating machinery design including shaft dynamics, bearing selection, and gear design, • Solid background in thermal management including liquid cooling systems, heat exchangers, and thermal interface materials, • Experience designing and integrating cast, machined, and fabricated housings for high-precision rotating equipment, • Knowledge of automotive/agricultural durability requirements and validation testing procedures, • Familiarity with electric motor characteristics, efficiency maps, and integration requirements, • Experience with sealing systems for high-speed shafts and contamination prevention in agricultural environments, • Highly desired to have past experience as a Responsible Engineer or IPT lead., • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Sr. Electrical Engineer, Electric Motor Controls at Carbon Robotics, you will lead the design of high-power motor control systems for our diesel-electric platform. You'll architect traction motor drives, and optimize power management between the diesel generator and electric drive motors. From developing robust control algorithms to field testing on working farms, you'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Collaborate with our Mechanical Powertrain engineers to define and select core off the shelf and semi-custom components including diesel engine, generator, ECUs, start/standby batteries, and more for our upcoming projects., • Design high-power motor control systems for traction drives, linear actuation, and other industrial motion needs., • Develop control strategies for power management between diesel generator and multiple motor loads, • Design/integrate inverters and motor controllers capable of handling 100+ kW traction motors, • Create torque vectoring and traction control algorithms for optimal field performance, • Integrate motor control systems with vehicle CAN bus networks and tractor control units, • Collaborate with Mechanical Engineers on the development of thermal management systems for high-power motor drives operating in harsh agricultural environments, • Validate motor control performance under real farming conditions including heavy loads and variable terrain, • Produce high quality documentation to be used in a multidisciplinary engineering setting, • 5-15 years experience with high-power motor control systems (50kW+) in automotive or heavy equipment, • High proficiency in CAD, wiring, and PCB layout tools., • Expertise in traction motor control, regenerative braking, and hybrid powertrain systems, • Experience with high-voltage DC systems (400-800V) and associated safety protocols, • Proficiency in automotive communication protocols (CAN, J1939) and vehicle integration, • Strong background in power electronics for high-current motor drives and thermal management, • Experience with diesel-electric or hybrid vehicle architectures and power flow optimization, • Knowledge of automotive/agricultural durability requirements and validation testing procedures, • Desired to have a functional safety standards (ISO 26262, ISO 25119) for agricultural vehicles, • Highly desired to have past experience as a Responsible Engineer or IPT lead., • Willingness to travel ~10% of the time to support products in the production & field environments with a demonstrated ability to work directly with internal and external stakeholders/customers Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description Summary Geometrics Engineering is seeking qualified QA Inspector(s) / Resident Project Representative(s) (RPR) to join our team in multiple locations across the United States. This critical role supports our airfield construction program(s), focusing on runway and taxiway rehabilitation projects. The QA inspector / RPR will ensure quality assurance by monitoring, documenting, and verifying construction field activities, ensuring compliance with project specifications, plan sets, FAA requirements, quality standards and specific client requirements. Responsibilities • Support the Construction Manager and/or Resident Engineer to deliver high-quality airfield construction projects., • As an on-site Resident QA Inspector/ Project Representative (RPR). ensure that construction activities adhere to project specifications, quality standards, and FAA requirements., • Conduct thorough inspections and observations of contractor/subcontractor activities, ensuring alignment with approved construction plans, safety standards, and quality assurance and quality control (QA/QC) protocols., • Verify utility installations in accordance with project requirements including but not limited to storm drain, underdrain, airfield electrical, and associated structures., • Provide consistent updates on construction progress, noting any deviations and corrective measures taken., • Verify and review as-built documentation for accurate project records., • Utilize construction management software (e.g., Procore, Unifier)., • Coordinate and facilitate access for Air Operations Area (AOA) activities., • Ensure contractor compliance with client's safety, environmental, and FAA regulations., • Verified construction QA inspection experience, with a focus on airfield projects. Asphalt, concrete and utility experience preferred., • Strong capability in interpreting construction plans and specifications., • Prior experience on airfield improvement projects within active AOA environments is highly preferred., • Proven ability to develop effective working relationships with contractors, proactively resolve field issues, and communicate any concerns to the construction manager and Resident Engineer., • Detailed daily report writing, capturing weather conditions, labor force, equipment usage, materials quantities, QA/QC testing summaries, and any discussion with field personnel and contractors., • Valid driver's license., • Ability to obtain airport badge that may include a Criminal History Records Check (CHRC) and Security Threat Assessment (STA)., • Proficiency in MS Office., • Strong written and verbal communication skills, with an ability to maintain detailed, accurate project documentation.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Senior Electrical Engineer at Carbon Robotics, you will be a key part of the team that designs and lays out electrical power distribution systems, PCBs, control systems, and more. Not only will you architect and do detailed designs for the systems you own but you will also test and support them through production and post sales. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Design and integrate complete electrical systems including PCBs, control panels, power distribution, and wiring harnesses for revolutionary products, • Lead trade studies and define electrical system architectures, taking into consideration a wide variety of stakeholders, for electrical systems spanning embedded systems, industrial controls, and power systems., • Own systems from cradle to grave including component level and integrated testing, introduction to production, and post sale support., • Design and validate a variety of high and low voltage systems including 240V AC 3-phase power distribution systems and 24V DC control circuits, • Create system schematics, PCB layouts, industrial panel designs, and harness routing documentation using CAD and analytical modeling tools, • Partner with mechanical and software teams to ensure seamless integration of electrical subsystems into production hardware, • Drive technical decisions through project planning, task delegation, and cross-functional problem solving, • Support contract manufacturers and provide technical guidance for production of electrical assemblies, • 8-15 years experience designing complex electrical systems spanning embedded, power, and industrial applications, • Proficiency in Altium (v18+) for PCB design and Capital Harness or similar for wiring design, • Experience with high and low voltage systems, industrial controls, and safety systems (per SAE, ISO, IPC standards), • Strong background in both digital (microcontrollers, high-speed signals) and analog/power electronics, • Extensive experience designing for harsh outdoor environments and protecting against mechanical, thermal, corrosion and ESD damage., • Experience with SOLIDWORKS Electrical and mechanical integration workflows, • Hands-on hardware debugging skills and experience with automated test equipment design, • Knowledge of PLCs, industrial communication protocols, and sensor integration, • Experience managing electrical aspects of projects through contract manufacturing, • Past experience developing electrical systems for automotive, agricultural, or aerospace vehicles is highly desired. Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Sr. Purchasing Specialist,Hardware at Carbon Robotics you will support Purchasing, Supply Chain and Sourcing in delivering robust and scalable processes. What you'll do: • Forecast production levels to plan for materials needed., • Track supplier delivery performance and response time, • RFQs/RFPs as directed (production, field spares engineering testing and prototyping), • Write PO's and obtain approval through prescribed process (production, field spares, engineering testing, and prototyping), • Track and update order delivery dates weekly to ensure on time delivery. Escalate all anticipated late deliveries to manager, • Assist with material receiving for other departments as necessary and collaborate with Carbon Inventory Managers as applicable., • Proficient with Google Suite, NetSuite,Jira and other Supply Chain tools, • Minimum of 4+yrs(for Mid level) and 5+(for Senior) of experience in purchasing/procurement/sourcing, • Experience in purchasing hardware components including custom sheet metal fabrication,custom machined components, custom electrical harness and PCBs, various off the shelf components, • Experience with component consignment to outside suppliers, • Highly organized with excellent time management to juggle multiple priorities at the same time, • Attention to detail, • Problem solving ability with good communication skills, • Detail-oriented, with proven ability to deliver complex analysis, reconciliations and reports Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Software Engineering Manager (Frontend/Mobile) at Carbon Robotics, you will work alongside your software, mechanical and electrical peers to build AI and robotics products. In particular, you will be involved in the process of guiding a team through designing and implementing websites, applications and mobiles apps that are used with our products. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Manage and lead a team of engineers to build a variety of mobile and web applications that interface with both cloud and robotic systems., • Collaborate with other engineering teams and product managers across multiple disciplines., • Resolve conflicts within the team and across collaboration interfaces, • Oversee the software development lifecycle, including planning, design, implementation, testing, and deployment., • Manage resources and priorities so projects are successfully delivered on time, • Mentor, grow and provide technical guidance to engineers on the team, • Communicate deliverables effectively to the broader organization, • Experience Managing Frontend(Typescript, React) or Mobile (Flutter) Team, • Capable of operating as a Lead Software Engineer in your respective expertise, • Understanding of deployments of web and mobile products while collaborating with backend and robotic teams., • Excellent verbal and written communication skills and a desire to work in multidisciplinary organizations, • Lead by supporting an in the office culture where collaboration drives innovation, • Field visits to Farms are a must Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity – paying employees equitably for similar work. Offers are dependent on someone experience and may be outside of the published range when appropriate. If your skills are above the posted range... Apply! We want to hear from you! Carbon Robotics' base salary pay range:$195,000—$217,500 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Manager, Software Engineering - Robotic Systems at Carbon Robotics, you will work alongside your software, mechanical and electrical peers to build AI and robotics products. In particular, you will be involved in the process of guiding a team to develop robotic systems software across our LaserWeeder and Autotractor products. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Manage and lead a team of engineers to build a variety of robotic systems and algorithms., • Collaborate with other engineering teams and product managers across multiple disciplines., • Resolve conflicts within the team and across collaboration interfaces, • Oversee the software development lifecycle, including planning, design, implementation, testing, and deployment., • Manage resources and priorities so projects are successfully delivered on time., • Mentor, grow and provide technical guidance to engineers on the team., • Communicate deliverables effectively to the broader organization., • Experience managing and leading a software engineering team that has developed, deployed and maintained robots in a production environment., • Capable of operating as a Lead Software Engineer in your respective expertise., • Solid understanding of low level systems, robotic algorithms as well as robotic interactions with cloud systems., • Excellent verbal and written communication skills and a desire to work in multidisciplinary organizations., • Lead by supporting an in office culture where collaboration drives innovation., • Field visits to Farms are a must. Carbon Robotics follows equitable hiring practices. Flexibility in our hiring process allows hiring of talent at levels different from what are posted. The compensation range outlined is based on a target budgeted base salary. Individual base pay depends on various factors such as relevant experience and skill, Interview assessments and responsibility of role, job duties/requirements. Offers are determined using our equitable hiring practices. Carbon Robotics offers additional compensation in the form of benefits premiums, pre-IPO stock options and On Target Earning commissions for appropriate positions. Base pay ranges are reviewed each year. We are committed to the principle of pay equity – paying employees equitably for similar work. Offers are dependent on someone experience and may be outside of the published range when appropriate. If your skills are above the posted range... Apply! We want to hear from you! Carbon Robotics' base salary pay range:$195,000—$217,500 USD Why would you join Carbon Robotics? Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job DescriptionAt IUNU (“you knew”), we're amplifying the ability of growers to produce the highest quality greenhouse crops by leveraging robotics, computer vision, and AI. Our LUNA system is deployed at greenhouses in more than 15 countries, providing critical information like yield forecasts, pest detection and germination rates to growers on mobile and web platforms. By increasing yield and reducing waste, we're building a sustainable future full of delicious vegetables! As a Senior Mechanical Engineer in Robotics at IUNU, you will design, develop, and improve robotic systems that operate with a high degree of reliability in the challenging environment of a greenhouse. You possess an in-depth understanding of mechanical system design for harsh industrial environments such as IP67 waterproofing, high thermal loads in varying ambient temperatures, and significant vibration exposure. You combine your technical abilities with leadership skills to establish high standards of reliability and accountability for our fleet in the field, and you have experience maintaining those standards in production. Your curiosity and passion for engineering drive you to work cross-functionally, fostering a collegial and collaborative engineering culture. Responsibilities: • Design, develop, and improve IUNU robotic systems and deployments across multiple product lines, • Establish a high standard for the mechanical components of our robots and hardware installations with a focus on reliability, safety, and consistency, • Maintain system design schematics for production and prototype robots, and develop documentation for assembly and deployment, • Identify and manage opportunities to improve manufacturing (in-house and contracted) with respect to cost, timeliness, and quality, making the appropriate recommendations and tradeoffs as necessary, • Manage the complete lifecycle of engineering documentation, including authoring and maintaining precise engineering drawings, Bills of Materials (BOMs), and build processes, while driving quality improvements through the rigorous execution and approval of Engineering Change Notices (ECNs), • Work closely with electrical, firmware, application, and other mechanical engineers to efficiently size, groom, and prioritize work items in an Agile environment, • Excel in high-pressure situations, providing immediate troubleshooting and triage for urgent production, field, and manufacturing problems against tight, mission-critical deadlines., • Participate in accelerated testing of components for determining MTBF, lifespan, maintenance cycles and the associated acceptance criteria based upon business needs, • Open to travel 10%Requirements:, • Bachelor’s degree in Mechanical Engineering, Mechatronics, Robotics, or related technical field with typically a minimum of 3 years of related experience, • Experience creating parts using best practices, creating and working with large assemblies and structural analysis in SolidWorks, • Strong experience creating detailed engineering drawings and documentation (fully dimensioned part drawings, assembly drawings with BOM, exploded views, etc.) with a firm grasp of GD&T principles per ASME Y14.5M., • Solid understanding and application of principles, concepts, theories, and techniques in mechanical engineering, • Experience converting non-technical inputs into objectively verifiable engineering requirements that create a product that delights the customer, • Ability to quickly turn a finalized design into a physical prototype by producing engineering drawings, sourcing suppliers, working through procurement challenges, and leading final assembly on compressed timelines, • Ability to write clear and comprehensive technical documentation and assembly instructions, • Detail-oriented with excellent critical thinking, communication, time management skills and multitasking abilities., • Data-driven problem-solving skills to troubleshoot, triage, and fix mechanical, electrical, and software issues within production, design, and manufacturingDesired:, • Master’s degree in Mechanical Engineering, Mechatronics, Robotics, or related technical field, • Experience with mechanical engineering in a regulated industry such as aerospace or medical, • Prior robotics hardware implementation experience, • Experience with production level design, DFA, DFM, • Experience in designing and developing core electronics for robotic applications, including rechargeable battery power systems (BMS, charging circuits), power distribution, motor control, schematic capture, and PCB layout., • Experience in the hands-on integration of complex electromechanical systems, including the selection of sensors (LiDAR, IMUs, cameras) and actuators, and the design of robust wiring harnesses., • Experience in implementing and managing system-wide communication using ROS and a variety of industrial and wireless protocols (e.g., EtherCAT, CAN bus, Wi-Fi) over a standard TCP/IP network., • Hands-on experience with additive manufacturing practices and operating associated hardware, • Ability to read and create electrical schematics or PCB layouts, • Basic experience with Python, C++ and Linux environments using command-line interfaces, • Experience in low- to medium-volume manufacturing environments involving large products, • Six Sigma training / certification, • Experience designing, implementing, and testing both static and dynamic systems, • Experience working within an early/growth-stage startup team, • Experience leveraging AI tools to automate repetitive tasks and optimize workflows, resulting in a significant improvement in operational efficiency.We’re looking for a candidate who values transparency in communication and is comfortable documenting and troubleshooting issues. You should be able to communicate effectively with team members, including summarizing design decisions, test requirements and root cause analysis. You are able to write design, assembly and maintenance documentation and present them in a logical manner. You are comfortable with ambiguity and want to work in a fast-paced startup environment. Diversity: At IUNU, we’re committed to providing a safe and inclusive environment. We are dedicated to the happiness and success of all of our employees, and strive to foster a workplace in which individual differences are recognized, appreciated, nurtured, and respected. Diversity is important, and we strongly encourage people of all identities and backgrounds to confidently apply for a job with us if this is a role that interests and excites you. We want you to feel comfortable bringing your whole self to work with you, with all of your talents and strengths. Powered by JazzHR N1j6dZqOnE

Job Description Are you an experienced Tech looking for a new opportunity? We are a growing company with a growing team, so if you’re looking for a company that values its employees and offers competitive pay and benefits, then Mazzella might be the right place for you! Position Summary The Crane Service Technician is a front-line employee with direct customer contact. In addition to technical skills, people skills are vital for effective customer relationship management and decision making. Job Duties • Troubleshoot and repair customer cranes and crane systems and other lifting components as directed, • Install various types of cranes, hoists, components, and parts, • Modernize or upgrade various types of cranes, hoists, components, and parts, • Load test and /or perform non-destructive testing various types of cranes, hoists, components, and parts, • Sets up, operates, and maintains all service equipment, • Responsible for working safely and in accordance with customer, company, and OSHA requirements, • Communicate findings to the customer and gives a clear understanding of the day's work accomplished before leaving the jobsite; obtain written confirmation (signature) of critical findings from the customer before leaving the jobsite, • Review, interpret, and understand various crane type codes and inspection criteria, • Inspect hoists, cranes, crane systems, chain falls, pullers, slings, and below-the-hook devices, • Record the results of inspections neatly and accurately so that repair criteria is clearly evident, • Complete daily paperwork accurately including time entry, service reports, inspection reports, and sales lead generation in Service Pro, • Complete or assist with special projects as requested, • Assist Service Writers understanding completed inspection reports and service tickets to formulate quotes, • Keep training assignments current, • Demonstrated mechanical aptitude A high school diploma or GED required; vocational-technical school or crane training program, trade school, equivalent military experience or technical college training program preferred Experience & Skills • Minimum 2 years of experience in a maintenance organization, • Must have strong mechanical background and be able to quickly diagnose crane-related problems and accurately propose effective remedies, • Proficient knowledge of electrical theory for power and controls associated within the crane industry, • Willingness to stay educated in the crane industry; as cranes become increasingly sophisticated, service techs need to be increasingly computer literate and technologically savvy, • Excellent communication skills to build customer relationships, • Ability to multi-task and set priorities; highly organized, • Valid driver’s license in good standing that meets company requirements, • Flexible work schedule to meet customer's scheduling requirements; unexpected working hours are a common occurrence, • Must be able to lift/pull up to 75 lbs Mazzella is a family owned company that puts people first. With over 800 employees and 30 locations we are the humble leaders in the industry. We offer market competitive compensation and a wide range of benefits, including paid time off, affordable and comprehensive health insurance, dental, vision, 401(k) with company match, life insurance, and disability insurance. Why Team Members join Mazzella: • Team-oriented environment, • A real Work life/ Home life balance, • Growth and Development Opportunities including a Lifelong Learning Career Path, • Humble, Hungry, Smart Culture, • Market Competitive Salaries, • Free Virtual Doctor visits with $0 copay (Teledoc) Safe-personal commitment to all stakeholder’s well-being; purposeful control of risk Lifelong Learner – routinely acquire new skills and capabilities that bring value Humble – lack excessive ego or concerns about status; emphasize the Team over self Hungry – always looking for more, self-motivated, and diligent; do more than to just get by, committed Smart – common sense about people, good judgement, and intuition around their impact on group dynamic EOE/Drug Free Workplace Company DescriptionMazzella Service is a leader in providing overhead cranes, overhead crane services, material handling, specialty machinery, fall protection, and warehousing solutions. We provide world-class overhead crane solutions ranging from light-duty, economical cranes up to large capacity, high-duty cycle cranes. We also have a highly trained service staff that specializes in solving complex problems. Mazzella Service supplies and installs engineered fall protection systems in the U.S. We also are a distributor of soft goods like harnesses, lanyards, self-retracting lifelines, scaffolding, and netting. Additionally, our Warehouse Solutions team provides conveyor systems, storage racks, warehouse products, ASRS, vertical lifts, and more.Mazzella Service is a leader in providing overhead cranes, overhead crane services, material handling, specialty machinery, fall protection, and warehousing solutions. We provide world-class overhead crane solutions ranging from light-duty, economical cranes up to large capacity, high-duty cycle cranes. We also have a highly trained service staff that specializes in solving complex problems. Mazzella Service supplies and installs engineered fall protection systems in the U.S. We also are a distributor of soft goods like harnesses, lanyards, self-retracting lifelines, scaffolding, and netting. Additionally, our Warehouse Solutions team provides conveyor systems, storage racks, warehouse products, ASRS, vertical lifts, and more.

Job Description Casne Engineering is seeking an energetic and self-driven individual to provide project management support for engineering and technology projects. Candidates must be detail oriented, proactive, professional, and have positive demeanor. This position is work-from-home friendly. Responsibilities • Lead multiple projects with direct responsibilities to Clients and Program Managers, • Entry/updating of company and project databases, data transfers and e-document management, • Assembling of hard-copy and electronic project submittal documents, • Processing of correspondence such as Submittals, RFIs and change orders, • Facilitating project closeout documentation, • 5+ years prior project experience with CAPM certification or 3+ years prior with PMP, • Demonstrated leadership of a cross functional team consisting of technical and project administration, • Proficiency with the MS Office Suite, cloud data storage and PDF manipulation, • Excellent organizational, verbal, and written communication skills with a proactive approach to follow up, • Detail-oriented and the ability to prioritize and handle multiple deadline-driven tasks effectively and efficiently, • Possess strong interpersonal skills with a positive attitude and works well in a team environment, • Strong ability to lead customer facing meetings, • Experience in the design engineering, consulting, and/or IT services industries, • Experience with shared information portals such as Smartsheet, Newforma, Procore, etc., • Experience in handling sensitive client information and documents, • Active PMI membershipCompany DescriptionFounded in 1979, Casne is an employee-owned, full-service electrical and technology firm with offices in Bellevue, WA and Carlsbad, CA. We deliver high-quality engineered and information systems from concept to design, implementation and on through continued support. Our goal is to assist our clients, who range from small to Fortune 500 companies, achieve operational excellence through improvements to their critical electrical and technology infrastructures. Casne prides itself on accepting the challenges of our clients and then exceeding their expectations. We offer competitive pay, employment stability, and a comfortable work setting with an energetic team of dedicated professionals. Hybrid work arrangements may be possible depending on project responsibilities. Full-time benefits include health insurance, 401k, Employee Stock Ownership Plan (ESOP), potential equity ownership, performance bonuses, educational reimbursement, HSA/flexible spending, and other fringe benefits.Founded in 1979, Casne is an employee-owned, full-service electrical and technology firm with offices in Bellevue, WA and Carlsbad, CA. We deliver high-quality engineered and information systems from concept to design, implementation and on through continued support. Our goal is to assist our clients, who range from small to Fortune 500 companies, achieve operational excellence through improvements to their critical electrical and technology infrastructures. \r\n\r\nCasne prides itself on accepting the challenges of our clients and then exceeding their expectations. We offer competitive pay, employment stability, and a comfortable work setting with an energetic team of dedicated professionals. Hybrid work arrangements may be possible depending on project responsibilities. Full-time benefits include health insurance, 401k, Employee Stock Ownership Plan (ESOP), potential equity ownership, performance bonuses, educational reimbursement, HSA/flexible spending, and other fringe benefits.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Complete test programs throughout all phases of the design process, • Implement test plans, specifications, and procedures in accordance with quality assurance program requirements, • Release test programs and hardware on the ATE (Automated Testing Equipment) for characterization and production testing of silicon devices, • Update and optimize silicon test programs from test requirement documentation, • Purchase ATE hardware for NPI and production, including Load Board, probe card, and interface, • Analyze large data sets using JMP, SQL, Matlab and review results with test and design engineering teams, • Qualify new test hardware and software for release in a production environment, • Contribute to cost reduction efforts such as yield improvement, test time reduction, and test elimination, • Collaborate with Impinj's overseas teams to transfer products into high-volume testing, • Investigate production yield issues and product returns to determine root cause and implement corrective actionsWhat You Will Bring:, • Bachelor's degree in electrical engineering, computer engineering, or similar discipline with 5+ years of experience, • Product engineering experience with familiarity in ATE coverage, margin, and binning, • Direct experience with wafer or die ATE testing, NI/Emerson TestStand, and Semiconductor Test System (STS) is preferred, • The ability to perform conducted RF measurements including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, and group delay, • Strong analytical, planning, and organizational skills The typical base pay range for this role across the US is $111,200 - $166,800. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job DescriptionWho We AreAt PRIME, a culture of empathy, trust, and belonging is foundational. This is integral in our approach to recruiting, developing, and retaining the best people in the industry. Our growth mindset drives us to embrace challenges and discover what sparks inspiration for creative solutions. PRIME is compelled to keep evolving, and creating new opportunities for those who perform. Our comprehensive services cover the entire lifecycle of a project, capabilities include electrical construction, service and maintenance, underground, utilities services, renewable energy, and low voltage technology solutions. Consistently recognized as one of Washington’s Best Workplaces! Position SummaryWe are looking for a motivated senior level Electrical System Specialist with experience in Mission Critical/Data Center work to join one of PRIME's outstanding teams with room for growth and professional development. Senior Electrical System Specialists are responsible for the I&C on power distribution equipment at our various sites. Scope includes, but not limited to, setting communication devices and topology industrial networks, uploading HMI/ PLC programs, installation of I/O and CPUs, integration of 3rd Party EPMS, initial testing, operation, troubleshooting and modification of customer equipment and systems including MV/LV switchgear, transformers, metering, power monitoring, power quality, and protective relays. Apply today for immediate consideration!What You Will Do • Lead basic to complex installation and checkout of electric and electronic components for systems and service installed jobs and service agreements. Tasks are associated with maintenance and testing of switchgear/switchboard, motor controls, circuit breakers, panel boards, transformers, and surge protection devices, • Responsible for vibration analysis and metering, battery maintenance and testing, power monitoring, power quality, and protective relay maintenance, • Set communication devices and topology industrial networks; upload HMI/ PLC programs; install I/O and CPUs, • Perform integration of 3rd Party EPMS; initial testing, operation, troubleshooting and modification of customer equipment and systems, • Test MV or LV Circuit breakers; metal clad/vacuum switchgear; breakers or LV equipment and analyze test results, • Conduct Equipment Condition Assessments, • Troubleshoot and repair Electrical Control Circuits, • Organize and maintain job documentation, • Provide on-site assistance with or perform programming, start-up, checkout, commissioning, and validation processes., • Participate in job site final walk-through, complete all job closeout documentation, and provide customer training., • Act as technical resource to customers and field employees, • Provide instructions to customer personnel regarding proper operation and routine inspections. Train customers to maintain and adjust complex equipment., • Provide expert advice, training, and technical assistance to support staff and train lower-level employees., • Complete and submit reports covering all job activity., • Responsible for maintaining complex tools, test equipment, calibration items, etc., • Plan and estimate labor categories, rates, material dollar costs, and transportation expenses to complete complex proposals., • Perform review of complex task plans, drawings, and installation schematics; provide continual guidance throughout the project duration., • Must be available to respond to emergency and relief assignments., • Develops and maintains effective client relationships contributing to successful project outcomes., • Monitors jobsite safety and takes appropriate action to address and correct deficiencies, • Performs other duties as requestedWhat You Will Need to be Successful, • 6 or more years of experience troubleshooting and repairing electrical control circuits and ability to obtain thermography certification, • 6 or more years of experience in the installation and/or maintenance of Power Automation Switchboards, • 6 or more years of experience using electrical test sets to perform AC and DC high potential testing, transformer turns ratio testing, transformer power factor testing, and other power system test practices and procedures, • Skilled at interpreting protective coordination studies and testing and configuring protective relays, • Capable of reading bills of material, electrical blueprints, and power system study reports, • Experience with the installation, commissioning, and maintenance of low and medium voltage power distributions systems, • Familiar with the arc flash and shock hazards of 13.8kV on the following electrical equipment: Schnieder, Eaton, Siemens GIS, AIS, WL, RL, and SB breakers and switchgear, • Familiar with ANSI, NEC, NFPA, IEEE, and NETA codes and standards, • Must be able to carry and move equipment and tools weighing up to 50 pounds unassisted, • Proficient in Microsoft Office (Word, Excel, and Outlook), • Legally authorized to work in the United States on a continual and permanent basis without company sponsorship, • Must be 18 years of age and possess a valid driver's license with limited violationsPreferred Qualifications:, • Associate Degree or equivalent (Prefer US Army Prime and US Navy Nuclear)

Job Description Amphenol Communications Solutions (ACS), a division of Amphenol Corporation, is a world leader in interconnect solutions for Communications, Mobile, RF, Optics, and Commercial electronics markets. Amphenol Corporation is one of the world's largest designers and manufacturers of electrical, electronic and fiber optic connectors and interconnect systems, antennas, sensors and sensor-based products and coaxial and high-speed specialty cable. ACS has an expansive global presence in research and development, manufacturing, and sales. We design and manufacture a wide range of innovative connectors as well as cable assemblies for diverse applications including server, storage, data center, mobile, RF, networking, industrial, business equipment, and automotive. Position:Lead Customer Engineer-Power Solutions Location: Bay Area, CA SUMMARY:Our customer's success depends on our ability to solve their technical challenges in relation to power and provide interconnect power solutions. We value our relationships with these companies and depend on Customer Engineers to foster this ongoing partnership. As a Customer Engineer you will interface with our customers, internal product development, product marketing and sales teams, performing as an extension of the power engineering team. Amphenol is results driven company that allows its employees a large degree of freedom to achieve pre-defined goals. It is a flexible working environment, yet we expect hard work, commitment, and results in return. The role of Customer Engineer gives an excellent insight into the Sales, Marketing and Product Development functions of the organization RESPONSIBILITIES: • Work with customers to develop solutions that address their needs and satisfy the technical requirements related to power solutions, • Accurately access customer's needs, matching them with current products or propose modifications to current products and/or propose new product concepts for further development by engineering team, • Product knowledge Ability to provide the best solution, • Create models and/or technical presentations to propose concepts and solutions, • Proficient in internal systems: Windchill, product configurators, etc., • Provide key engineering documents: drawings, product specifications, lab test results, plating analysis etc., • Know business unit capabilities (Engineering, Thermal, MFG, Test labs), • Engage thermal engineering and simulation teams when needed to support; facilitate lab testing to support design proposals, • Show competence / expertise on the company and its products, with the ability to identify and communicate emerging trends in marketplace, • Help devise strategies to differentiate our products and solutions from our competitors, • Develop a trusted adviser relationship with engineering teams of key customers, • Lead and/or participate in new product Voice of Customer activity, • Meet and exceed strategic objectives, • Bachelor's Degree in Mechanical Engineering or a related technical field, • Minimum of 2 years proven experience providing technical support to produce design wins within the connector industry, • Proficient in 3D modeling and Product Data Management (Ex: Creo and Windchill), • Some knowledge of server/storage/networking/data center rack level architectures preferred, • Excellent verbal and written communication skills ability to communicate within a Global organization to technical and non-technical audiences and at various levels of the organization, • Strong organization and presentation skills, • High level customer service and ability to build relationships with customers, • Proficiency with Microsoft Office Products

Job Description About the CompanyThis company was founded to enable a future with affordable, reliable, and clean energy. By making fusion energy a reality, they are enabling a step change in the future of energy generation. They differentiate from other companies by rapidly building, testing, and iterating on their designs, not just theorizing and modeling. Their prototypes are doing fusion every day! Building the world's first energy producing fusion generators requires a creative and diverse team of engineers, scientists, and builders. If you are passionate about solving one of the world's most pressing challenges, this opportunity is for you.This is a direct hire, permanent placement position for a client of AdAstra Talent Advisors.About the RoleOur Client is seeking a Senior Electrical Engineer to support the core energy management system for their fusion generators. You will support various electrical energy management systems including energy delivery for the magnetics, fusion energy recovery, re-distribution network, as well as AC grid-tie networks. You will report directly to the Senior Manager of Electrical Engineering in their Seattle area office.Responsibilities • Design, test, troubleshoot, and support operation of high voltage electrical power systems for driving pulsed magnetic coils, • Oversee design, procurement, construction, and commissioning of high-power electrical systems to drive pulsed coils (<1ms) at currents up to 5MA and voltages up to 40 kV, • Develop electrical system architecture and work with designers to produce electrical schematics and installation drawings, • Develop and vet cost-effective, scalable, and reliable design solutions via technical peer review through a design review process for each major design project, • Collaborate with operators of generator power systems through machine commissioning and, for development machines, through the lifetime of the machine with an eye for optimization of future generators, • Demonstrate rigorous engineering practices including management of cost, schedule, and resource estimates as they pertain to your design, build, and delivery timelines, • Mentor and support engineering growth of other team members on the electrical engineering team as well as other technical teamsRequirements, • 8+ years experience in power electronics, solving complex electrical engineering problems from design to delivery, • Strong background with solid state switching technologies and understanding of operating characteristics of power electronic components such as IGBTs, power MOSFETs, and SCRs, • Technical expertise in the application of engineering concepts, principles, codes, and theory, and practice with the ability to coordinate workloads to meet established deadlines or milestones with some experience in project leadership, • Advanced in electronic troubleshooting systems using standard benchtop tools such as oscilloscopes, Eloads, pulse generators, spectrum analyzers, and PCB design software, • Experience with Microsoft Suite, LTSpice, SIMtrex/Simplis, Altium, MatlabLogistical Requirements, • This role will be located in the greater Seattle, WA area, • The role involves working around high energy electrical systems and in areas containing high magnetic fields. Safety is the utmost priority with our client and the candidate must be willing and able to work safely in these environments.ITAR Requirement, • To conform to U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by ITAR (22 CFR §120.15), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Benefit Highlights, • Our client's compensation package includes a competitively benchmarked base salary, meaningful equity grants, and comprehensive benefits. Final compensation is determined through a holistic evaluation of your experience, qualifications, and our commitment to internal equity - ensuring fairness and transparency across our teams. We are committed to fostering a fair and equitable environment in every aspect of our operations, including compensation., • This is an exempt salaried role.In addition to base salary, you may also be eligible for:, • Medical, Dental, and Vision plans for employees and their families, • 31 Days of PTO (21 vacation days and 10 sick days), • 10 Paid holidays, plus company-wide winter break, • Up to 5% employer 401(k) match, • Short term disability, long term disability, and life insurance, • Paid parental leave and support (up to 16 weeks)

Job Description Position Overview: The Production Assembler is responsible for Assembly of product to bill of materials. Work involves ability to follow directions and work with limited supervision. Principal Duties and Responsibilities (Essential Functions): To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Receive work orders for the job and plan details of working procedure and tools., • Perform quality checks for mistakes or faulty components in the assembly process., • Assemble and program electrical panels., • Put together wire harnesses to specifications, • Troubleshoot electrical issues., • Read schematics and wire electrical to specifications., • Supplies own tools., • Assist with assembly and other production tasks, as needed., • Keep equipment and work area clean and orderly., • Strong technical and mechanical skills and experience required; product knowledge helpful., • Ability to write and present information clearly to co-workers., • Excellent organizational and problem solving skills., • Must be able to read, write and understand assembly instructions., • Strong verbal and written communication skills., • Demonstrated ability to work independently without close supervision., • High school diploma or equivalent combination of education and experience., • Technical training in electrical and mechanical is helpful. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Other Criteria: • For insurance purposes, must have a clean driving record and valid driver's license for the state they are driving in required., • Complies with Company policies and procedures., • Performs job safely with respect to others, to property and to individual safety., • Works effectively with others in the company to encourage teamwork and productivity., • We are drug free workplace that conducts pre-employment physical and drug screenings. We are regulated by the department of transportation and will be conducting random drug testing at regular intervals. EEO Statement Northern Lights, Inc., is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionWho we are Metropolis is an artificial intelligence company that uses computer vision technology to enable frictionless, checkout-free experiences in the real world. Today, we are reimagining parking to enable millions of consumers to just "drive in and drive out." We envision a future where people transact in the real world with a speed, ease and convenience that is unparalleled, even online. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working and playing remarkable - giving us back our most valuable asset, time. Who you are Metropolis is looking for a Staff Computer Vision Engineer to lead the design and development of perception algorithms and systems that power Metropolis's "AI for the Real World". We are developing a broad suite of computer vision systems that span both edge and cloud environments, and enable checkout-free experiences in a variety of applications. As a senior technical leader, you will drive the optimization, integration, and validation of advanced perception models for real-time deployment on edge and cloud platforms. This will include solving complex challenges in object detection, tracking, and recognition, and may span video analytics and multi-modal systems. You will work closely with cross-functional teams throughout the entire perception system lifecycle, from development to rigorous testing, while driving innovations in computer vision and machine learning that directly enhance the accuracy, reliability, and performance of applications core to our company. Excellence in this position involves leading innovation in computer vision, delivering impactful results, and fostering growth through technical leadership and mentorship within the ML team. You must be able to thrive in a entrepreneurial environment, working collaboratively in a fast-paced environment that often has multiple stakeholders. You won't be afraid to break new technological ground at Metropolis, and are more than willing to roll up your sleeves, dig in, and get the job done. If you have a background in computer vision and perception, and are excited by developing systems that go into the real world to solve real problems, please reach out! What you'll do • Architect and develop advanced perception algorithms for tasks such as object detection, tracking, semantic segmentation, and scene understanding., • Take initiative to identify gaps, bottlenecks, and opportunities in perception performance and system design—then drive solutions from concept through deployment, • Define and implement key metrics and KPIs to rigorously evaluate perception system accuracy, robustness, and scalability across diverse real-world conditions, • Drive system-level debugging and root cause analysis for perception failures in production environments, • Collaborate with hardware, ML, and software engineering teams to improve data pipelines, model deployment frameworks, and sensor configurations, • Mentor and lead by example, promoting best practices in scalable architecture, model evaluation, and engineering excellence within the computer vision team, • Research, prototype, and integrate new machine learning or deep learning approaches applicable to perception problems, • Participate in cross-team initiatives to improve system reliability, labeling quality, simulation-based validation, optimizing perception models and production-readiness of perception models, • Stay ahead of the curve by researching, prototyping, and integrating emerging deep learning techniques and tools into our perception stackWhat we're looking for, • M.S. or Ph.D. in Computer Science, Electrical Engineering, Robotics, or related field with a focus on computer vision or machine learning, • 8+ years of industry experience in developing and deploying perception algorithms in real-world applications, • Strong proficiency in modern deep learning frameworks (e.g., PyTorch, TensorFlow, Qualcomm Chip) and classical CV libraries (e.g., OpenCV), • Deep expertise in one or more of: object detection, multi-object tracking, segmentation, depth estimation, or sensor fusion, • Solid experience with deployment of ML models on edge devices and Cloud Platform (e.g., GPU/embedded), • Excellent programming skills in Python or C++, • Strong understanding of 2D/3D geometry and image processing, • Experience working with large-scale datasets, including data curation, annotation, evaluation, Airflow pipeline and messaging platforms (e.g. MQTT, Kafka, or ROS2), • Familiarity with cloud platforms (AWS, GCP, or Azure), containerization (Docker), and orchestration (ECS, Kubernetes), • Familiarity with ML model training, Data Annotation and Model Evaluation, • Strong understanding of the agile development process and CI/CD pipelines and tools (e.g., Github Actions, Jenkins), • Proven track record of technical leadership and mentorship in high-performing engineering teams Metropolis values in-person collaboration to drive innovation, strengthen culture, and enhance the Member experience. Our corporate team members hold to our office-first model, which requires employees to be on-site at least four days a week, fostering organic interactions that spark creativity and connection Metropolis may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate's application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, Metropolis retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. Metropolis Technologies is an equal opportunity employer. We make all hiring decisions based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including gender identity, sexual orientation, or pregnancy), national origin, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Job Description About the Company Armada is an edge computing startup that provides computing infrastructure to remote areas where connectivity and cloud infrastructure is limited, as well as areas where data needs to be processed locally for real-time analytics and AI at the edge. We're looking to bring on the most brilliant minds to help further our mission of bridging the digital divide with advanced technology infrastructure that can be rapidly deployed anywhere. About the Role The Technical Program Manager for Federal Programs is responsible for guiding Armada products through federal accreditation processes—including FedRAMP High, DoD IL5/IL6, and agency-specific Authorizations to Operate (ATOs). You will coordinate cross-functional engineering, security, and compliance teams to achieve on-schedule, audit-ready releases. Location. This role is office-based in Bellevue, Washington office. What You'll Do (Key Responsibilities) • Compliance Delivery – Plan, track, and execute end-to-end accreditation efforts (FedRAMP High, RMF, IL5/IL6, and agency-specific ATOs)., • Requirements Management – Translate cybersecurity standards and practices within the U.S. federal government such as NIST 800-53, CNSSI, STIG, and related control frameworks into actionable engineering tasks and milestones., • Program Coordination – Align Security, Cloud, Hardware, DevOps, and Federal teams; manage artifact creation, testing, and FedRAMP POA&M closure., • Stakeholder Engagement – Serve as primary point of contact for 3PAOs, Authorizing Officials, Executive Offices, and internal leadership, providing concise status and risk reports., • Risk & Schedule Management – Maintain integrated program plans, manage dependencies (e.g., supply chain), and develop mitigation strategies., • Process Improvement – Establish repeatable templates, checklists, and dashboards to streamline future accreditation cycles., • 6+ years of technical or program management experience, including at least 3 years leading products through FedRAMP High and/or DoD IL5/IL6 accreditation., • Demonstrated expertise with RMF, NIST 800-53, DFARS, CMMC, and coordination with 3PAOs and government Authorizing Officials., • Strong technical background in cloud infrastructure and networking; able to discuss encryption boundaries, latency trade-offs, and edge-to-cloud architectures., • Proven ability to establish planning cadences and communicate program status effectively to senior leadership (SES, C-suite)., • U.S. citizenship and eligibility for a Secret or higher security clearance., • Experience delivering ruggedized or disconnected systems through classified ATOs., • Relevant certifications (PMP, SAFe, CISSP). For select roles, due to the nature of our clientele and the technologies involved, there may be specific nationality or citizenship indicated in the required qualifications section. These roles may involve access to sensitive information that is subject to export control regulations or other legal restrictions. In such cases, employment offers will be contingent upon your ability to comply with these requirements. Compensation & Benefits For U.S. Based candidates: To ensure fairness and transparency, the base salary range for this role for candidates in the U.S. are listed, varying based on location experience, skills, and qualifications. In addition to the salary, this role will also be offered equity and subsidized benefits (details available upon request). Benefits • Competitive base salary and equity, • Medical, dental, and vision (subsidized cost), • Health savings accounts (HSA), flexible spending accounts (FSA), and dependent care FSAs (DCFSA), • Retirement plan options, including 401(k) and Roth 401(k), • Unlimited paid time off (PTO), • 15 paid company holidays per year #LI-ST1 #LI-Onsite Compensation$128,000—$160,000 USD You're a Great Fit if You're • A go-getter with a growth mindset. You're intellectually curious, have strong business acumen, and actively seek opportunities to build relevant skills and knowledge, • A detail-oriented problem-solver. You can independently gather information, solve problems efficiently, and deliver results with a "get-it-done" attitude, • Thrive in a fast-paced environment. You're energized by an entrepreneurial spirit, capable of working quickly, and excited to contribute to a growing company, • A collaborative team player. You focus on business success and are motivated by team accomplishment vs personal agenda, • Highly organized and results-driven. Strong prioritization skills and a dedicated work ethic are essential for you Equal Opportunity Statement At Armada, we are committed to fostering a work environment where everyone is given equal opportunities to thrive. As an equal opportunity employer, we strictly prohibit discrimination or harassment based on race, color, gender, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other characteristic protected by law. This policy applies to all employment decisions, including hiring, promotions, and compensation. Our hiring is guided by qualifications, merit, and the business needs at the time. Unsolicited Resumes and Candidates Armada does not accept unsolicited resumes or candidate submissions from external agencies or recruiters. All candidates must apply directly through our careers page. Any resumes submitted by agencies without a prior signed agreement will be considered unsolicited and Armada will not be obligated to pay any fees.

Job Description We are seeking a dedicated and experienced Regional Maintenance Manager to lead maintenance operations across our properties in Washington. This exciting opportunity comes with the responsibility of overseeing maintenance projects, capital improvements, and property upkeep. Reporting directly to the Director of Operations, you will play a vital role in ensuring that our maintenance operations are completed efficiently, on time, and within budget. Key Responsibilities: • Lead and guide maintenance crews to perform necessary duties effectively., • Conduct regular property inspections to identify maintenance issues and determine corrective actions., • Assist in recruiting and onboarding key maintenance personnel., • Collaborate with upper management to implement industry-specific modifications., • Work alongside the Director of Operations to establish cost-effective products and inventory control systems., • Standardize maintenance processes across the organization., • Train and mentor on-site maintenance teams to comply with company standards and best practices., • Foster strong relationships with vendors, suppliers, and other stakeholders., • Review, negotiate, and oversee maintenance-related contracts to ensure quality service and cost-effectiveness., • Monitor company turn/reno metrics, identify inefficiencies, and take corrective action., • Utilize strong construction skills in hands-on maintenance work., • Conduct regular safety meetings and ensure compliance with HAZCOM standards., • Maintain updated and accessible MSDS sheets., • Stay informed about EPA and OSHA regulations for hazardous materials., • Train staff in the proper use of safety equipment and guidelines., • Identify and promptly correct unsafe property conditions., • Maintain accurate records for maintenance, service requests, and expenditures., • High School Diploma or equivalent; College Degree preferred., • Minimum of 5 years of management and leadership experience., • Extensive plumbing, electrical, and construction knowledge required., • Proven experience in apartment maintenance and renovation is a plus., • Reliable transportation is a must., • Minimum of 3 years of experience negotiating with third-party providers., • 3 years of experience in renovations across three or more properties., • Must provide personal tools and be skilled in using various hand tools, power tools, and maintenance equipment.

Job Description Impinj is a leading RAIN RFID provider and Internet of Things pioneer. We're inventing ways to connect every thing to the Internet — including retail apparel, retail general merchandise, healthcare items, automobile parts, airline baggage, food and much more. With more than 100 billion items connected to date, and multiple Fortune 500 enterprises around the world using our platform, we solve for a better understanding of our world. If it's a thing, we're working to connect it. Join Impinj and help us realize our vision of a boundless IoT— connecting trillions of everyday items to the Internet. Team Overview: We are looking for experienced semiconductor/RF hardware Test Engineer to join the Impinj Product and Test Engineering team to work on the next generation of End-point and Reader IC's. They will use their expertise in test methodology and knowledge of test hardware to create, deploy, and maintain test solutions running on production ATE. These solutions will enable characterization, qualification, and production for Impinj's End-point and Reader IC's. What You Will Do: • Complete test programs throughout all phases of the design process, • Implement test plans, specifications, and procedures in accordance with quality assurance program requirements, • Release test programs and hardware on the ATE (Automated Testing Equipment) for characterization and production testing of silicon devices, • Update and optimize silicon test programs from test requirement documentation, • Purchase ATE hardware for NPI and production, including Load Board, probe card, and interface, • Analyze large data sets using JMP, SQL, Matlab and review results with test and design engineering teams, • Qualify new test hardware and software for release in a production environment, • Contribute to cost reduction efforts such as yield improvement, test time reduction, and test elimination, • Collaborate with Impinj's overseas teams to transfer products into high-volume testing, • Investigate production yield issues and product returns to determine root cause and implement corrective actionsWhat You Will Bring:, • Bachelor's degree in electrical engineering, computer engineering, or similar discipline with 5+ years of experience, • Product engineering experience with familiarity in ATE coverage, margin, and binning, • Direct experience with wafer or die ATE testing, NI/Emerson TestStand, and Semiconductor Test System (STS) is preferred, • The ability to perform conducted RF measurements including S-parameters, AM/PM, compression, noise figure, harmonics/spurious emission, phase noise, switching speed, bit error rate, adjacent channel power, and group delay, • Strong analytical, planning, and organizational skills The typical base pay range for this role across the US is $111,200 - $166,800. Individual base pay depends on various factors such as complexity and responsibility of role, job duties, requirements, and relevant experience and skills. Both market wage data and the mid-point of the pay range is reviewed and used as the starting point for all new hire offers. Offers are made within the base pay range applicable at the time. At Impinj certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. US based employees have access to healthcare benefits; a 401(k) plan and company match among others. For a more comprehensive list of US employment benefits, click here. US Export Controls: This position has access to technologies or data subject to U.S. export control regulations. Under these laws, the release or transfer of export-controlled items or information to individuals who are not classified as "U.S. persons" (as defined by Immigration & Nationality Act) may require prior authorization from the U.S. government. We may require additional documentation related to national identity to determine whether an export compliance license is required for any export-controlled items. This information is requested solely for the purpose of complying with U.S. export control laws and will not be used for other purposes. Learn more about export compliance here. Why work at Impinj: Know you're making a difference. Competitive benefits. Support for remote work or a desk with a view. Weekly Q&A sessions with our executive team. Impinj provides an environment that fosters openness and innovation and is developing technology that delivers a positive impact on the world. Collaboration and teamwork are highly valued, and accomplishments are duly celebrated. We have an open paid time-off policy paired with a respect for work/life balance. Our headquarters is located in Seattle with spectacular views of the Olympics, Lake Union, and Mt Baker, which can be enjoyed from our rooftop deck. Our Brazilian site is in Porto Alegre, Rio Grande do Sul state, at "Tecnopuc," a technology park that offers a very nice workplace for the development of groundbreaking technologies. Impinj is committed to creating a diverse and inclusive work environment and welcomes applicants from all backgrounds. We are an equal opportunity employer and do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job DescriptionSalary: $45.00-$55.00/hour Every day at CMTS, we undertake impactful infrastructure projects that positively impact lives and communities. CMTS has an extensive 40-year industry experience, which ensures a strong foundation for ongoing success. Our company values employees by fostering a culture of learning, personal development, and well-being. We prioritize work-life balance and ethical business practices and engage with our community through employee-driven initiatives. Join us on our journey of growth and success! Were currently seeking a highly motivatedBaggage Inspectorlocated inSeattle, WA. Required Education: • High School Diploma Required Qualifications: In order to become a candidate, you must possess the following skills and abilities. • Minimum of five years of experience in equipment for complex warehousing, package handling, shipping or baggage handling facilities preferably in airport settings., • General building inspection background with emphasis on the interoperability of mechanical (conveyor systems), electrical, and control systems within large building spaces., • Requires familiarity with wall and ceiling construction and the placement of MEP systems within walls and above ceilings., • Must be able to pass TSA security and background check to obtain unescorted badging., • Excellent oral and written communication skills., • Must be adept at conflict avoidance or abatement. Responsibilities: • Monitor and inspect the work of contractors to ensure proper construction methods are utilized- Review plans, specifications, submittals, drawings, change orders and Requests for Information for requirements of the construction contract to be applied in the field, • Prepare and maintain documentation including inspection logs, daily reports, force accounts, materials testing, and other construction records, • Draft Construction Weekly Progress Reports (CWPR) for review and distribution by the Resident Engineer, • Prepare and maintain digital photographic documentation of assigned projects, • Take or Verify field measurements/quantities for contract payments, • Identify construction issues and problems and recommend potential solutions, • Participate in the review of initial project designs before plans are finalized and put out for bid- Assist with bid quantity take-offs, • Coordinate material deliveries and delivery logistics including time of day and proper delivery routes, • Participate in managing and inspecting project punch list and cover inspections and provide status reports on completion progress, • Monitor change order work in the field and sign off on force account work tickets- Escort consultants, contractors, and visitors to project sites, • Attend off-site testing and inspections as needed (travel will be required), • Participate in cost review, negotiating, and finalization of the Maximum Allowable Construction Costs (MACC) and any mini-MACCs, • Inspect project site conditions and ensure contractors utilize and maintain Temporary Erosion and Sediment Control (TESC) best practices according to the standards of each project; report any TESC or environment-related issues, • Update design plans/drawings based on changes that occur during actual construction; document reasons for change; and ensure drawings are an accurate representation of work performed, • Identify, document, and track closure of contractor work that is out of compliance or deficient Initiates Noncompliance Reports for action by the Resident Engineer, • Witness special inspections, testing (on or off-site) of contract material, equipment, and installations, • Participate with or lead coordination efforts between outside consultant inspection agencies (special inspection & testing, environmental, hazardous materials) and contractors; Verify/ evaluate consultant invoices and provide recommendations for payment, • Coordinate routine shutdown requests from contractors with customers, tenants, and the Port department, which includes notification to all interested parties and obtaining required approvals/signatures; Issue CAFs- Constructability review Salary: • $45.00 - $55.00/hour Bonus Pay: A bonus may be granted to employees depending on individual performance, employee utilization, attendance, tenure, and furtherance of other non-financial corporate goals; bonus opportunities are available at managements discretion. CMTS LLC offers 100% company-paid medical, dental, vision, 401k, life, and long-term disability insurance coverage for employees. CMTS, LLC is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, pregnancy, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state, or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment.

Job DescriptionProject Manager Location: Greater Seattle Area Build Your Career. Lead Our Projects. At Liberty Electric, we don't just build infrastructure-we build careers, communities, and ownership. We're looking for a driven Project Manager with strong leadership skills to guide teams, deliver results, and help us fulfill major infrastructure contracts across the Pacific Northwest. This is a role for someone who thrives on problem-solving, coordination, and inspiring people to perform at their best. What You'll Do As a Project Manager at Liberty, you'll oversee projects from planning to closeout-ensuring field crews, subcontractors, and clients all move in sync. You'll not just manage projects-you'll build and lead successful teams that bring them to life. * Project Planning & Setup * Review and interpret contracts, specifications, estimates, and plans. * Develop project budgets, cost codes, and billing schedules. * Determine and order required materials, equipment, and manpower. * Leadership & Team Building * Lead and motivate project teams to deliver safe, efficient, and high-quality work. * Coach, mentor, and hold team members accountable to Liberty's standards of performance. * Foster collaboration between office staff, field crews, and subcontractors. * Execution & Oversight * Coordinate with foremen to build and update look-ahead schedules. * Monitor costs, code expenditures, and prepare financial projections. * Manage subcontractors-negotiate scope, price, schedule, and oversee progress. * Documentation & Communication * Prepare and track submittals, RFIs, PIPs, and project documentation. * Communicate daily with field crews on schedules, reports, and change orders. * Issue notices of delays or impacts (weather, trades, scheduling). * Represent Liberty's interests in all negotiations and client interactions. * Problem Solving & Change Management * Identify and resolve discrepancies in design or contract requirements. * Price and negotiate forward change orders with owners. * Ensure revised submittals, materials, and resources are in place for added work. What We're Looking For * Experience: Minimum 5 years in construction management (electrical/public works experience preferred). * Education: High school diploma or equivalent required; Construction Management degree or equivalent experience strongly valued. * Leadership: Demonstrated ability to build, inspire, and lead high-performing teams. * Skills: * Strong financial and analytical skills. * Proficient in Microsoft Office Suite; experience with COINS or similar systems. * Excellent written and verbal communication. * Ability to prioritize, manage time, and work independently with minimal supervision. * Commitment to confidentiality, ethical decision-making, and professional integrity. Benefits That Work for You * Health Insurance, 100% Paid: We cover the full cost of your premiums. * Retirement & Ownership: Stock options, 401(k) with 4% match, and profit sharing. * Time Off That Fits Your Life: Unlimited vacation policy plus 8 paid holidays. * Growth & Leadership: Career advancement opportunities and leadership coaching from industry-leading psychologists. * Peace of Mind: Medical, dental, and vision coverage for you and your family at no out-of-pocket premium cost. * Learning Support: Educational assistance after probationary period. Why Liberty? At Liberty Electric, we're a union electrical subcontractor with a clear vision: Built by Us. Owned by Us. We empower our employees to grow their careers while helping shape the infrastructure of the Pacific Northwest. Our culture is built on ownership, craftsmanship, and the belief that great leaders build great teams-and great teams build great projects. ???? Apply today to lead projects, inspire teams, and help build the future of our region with Liberty Electric. Liberty Electric is an equal opportunity employer. We are a drug and alcohol-free workplace. All new hires and employees are subject to drug testing in accordance with company policy.

Job DescriptionDocument Control Manager Location: Greater Seattle Area Keep Projects Organized. Keep Teams Moving. At Liberty Electric, we power communities across the Pacific Northwest by delivering complex electrical and infrastructure projects. To keep projects on track and teams supported, we're hiring a Document Control Manager to oversee all company and project-level documentation. This role is the hub of communication and information flow. You'll be responsible for organizing, maintaining, and distributing documents and correspondence across multiple projects-ensuring everything complies with both customer and company requirements. What You'll Do As a Document Control Manager, you'll develop and manage the systems that keep Liberty's projects efficient, compliant, and successful. * Document Control Systems * Develop, implement, and manage company and project-level document control processes. * Organize and maintain electronic and physical filing systems. * Track, log, and distribute correspondence, submittals, transmittals, schedules, and reports. * Administrative & Technical Support * Process and manage data within Procore or other designated databases. * Perform quality control: proofreading, editing, and reviewing documentation for accuracy. * Support management and project teams with document flow, communication, and reporting. * Collaboration & Process Improvement * Coordinate with office and field teams to ensure timely information sharing. * Research, develop, and enhance document control processes for greater efficiency. * Assist with special management tasks and additional duties as assigned. What We're Looking For * Education/Experience: * High school diploma or equivalent required. * 2+ years of document control or project management experience in the construction industry. * Skills & Qualities: * Strong decision-making and problem-solving abilities. * Highly detail-oriented with excellent organizational skills. * Proficient in Microsoft Word, Excel, Outlook, Procore, and database management. * Effective written and verbal communication with internal and external stakeholders. * Ability to prioritize tasks and manage multiple deadlines in a fast-paced environment. * Ownership mindset with pride in delivering accurate, timely results. Benefits That Work for You * Health Insurance: Medical, dental, and vision coverage with Liberty-paid premiums. * Retirement & Ownership: 401(k) with 4% match and profit sharing. * Time Off: Vacation policy plus 8 paid holidays. * Growth & Learning: Educational assistance after probationary period and opportunities for career advancement. * Culture of Integrity: Work in a team-driven environment that values organization, accountability, and craftsmanship. Why Liberty? At Liberty Electric, we believe that strong systems build strong projects. Our Document Control Managers play a key role in keeping projects organized, clients informed, and teams empowered to perform their best. This role is a launching point for growth into broader project management and leadership opportunities. ???? Apply today to join Liberty Electric and help keep our projects running with precision and excellence. Liberty Electric is an equal opportunity employer. We are a drug and alcohol-free workplace. All new hires and employees are subject to drug testing in accordance with company policy.

Job Description The Kestra team has over 400 years of experience in the external and internal cardiac medical device markets. The company was founded in 2014 by industry leaders inspired by the opportunity to unite modern wearable technologies with proven device therapies. Kestra’s solutions combine high quality and technical performance with a wearable design that provides the greatest regard for patient comfort and dignity. Innovating versatile new ways to deliver care, Kestra is helping patients and their care teams harmoniously monitor, manage and protect life. The Systems Engineer will interact with customers, customer advocates, stakeholders, human factors and a variety of engineering disciplines to understand intended product uses, product concepts and technology. They are directly responsible for the development, review and ongoing maintenance of high quality, well understood, broadly communicated system and software requirements and are expected to develop expertise in these same areas. ESSENTIAL DUTIES • Lead and/or contribute to cross-functional product definition teams to define medical device systems and roadmaps., • Lead the documentation, review, communication and maintenance of assigned areas of Requirements and associated Traceability, • Lead and/or contribute to Risk Analysis activities, as required, in assigned areas, • Work directly with engineering leads to translate System Requirements, Interaction/UI Design and System Risk Analyses into component-level requirements, designs and risk management approaches, • Perform regular System Integration and System Testing during development, • Support System and Software Verification planning, protocol development and reporting, as required, • Analyze system problems and determine root cause, • Develop and implement corrective actions COMPETENCIES • Ability to be a self-starter, seek new and better methods, and work with minimum supervision, • Demonstrates deep expertise in profession and industry best practices, • Ability to collaborate within a Team environment and across functions, • Embraces Kestra’s Mission & Core Values, • Capability to discern relevant facts and in turn, effectively resolve issues, • Ability to be flexible in a fast-paced goal-oriented environment, • Demonstrates the understanding of deadlines and time limits, ability to accomplish goals, and the desire to win Requirements QUALIFICATIONS • Bachelor of Engineering Degree, • BS degree with a minimum of 3 years of related experience, • MS degree with a minimum of 1 years of related experience, • PhD degree with a minimum of 1 year of experience, • Direct experience with definition and documentation of Engineering / Technical requirements, • Excellent verbal and written documentation and communication skills in English PREFERRED • Systems, biomedical, software and/or electrical engineering background, • Direct, practical experience with IEC 62304-compliant SW Development and Agile development methods., • Experience with medical device development with significant software content., • Familiarity with mobile platforms (iOS, Android), • Experience with medical device risk analysis, ISO 14971 and/or IEC/TR 80002-1, • Experience with requirements management and traceability tools, • Passion for defining and delivering high-quality products that satisfy users’ needs, • Ability to invent, think creatively, and be resourceful SUPERVISORY RESPONSIBILITES • None WORKING CONDITIONS • Fast paced office environment, • Lab environment, • Noise level typical of an open office environment, • Extended hours, as needed PHYSICAL DEMANDS • Frequent keyboard and mouse usage, • Frequent sitting for extended periods of time, • Occasional bending and stooping, • Occasional lifting up to 20 pounds TRAVEL • Occasional travel, less than 10% OTHER DUTIES This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the Team Member. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Benefits Kestra offers a very competitive benefit package including Medical, Dental, 401K with Match, etc. Pay equity is an important part of Kestra’s Culture. Our compensation ranges are guided by national and local salary surveys and take into consideration experience level and internal equity. Each role is benchmarked based on the job description provided If your qualifications and/or experience level are outside of the posted position, we encourage you to apply as we are growing fast and roles that are coming soon may not be posted. Salary: Annualized at $100,000 - $120,000, plus bonus. Depending on experience. Kestra Medical Technologies is an equal opportunity employer. Kestra Medical Technologies does not discriminate on the basis of race, color, religion, national origin, veteran status, age, sexual orientation, gender identity and/or expression, marital status, disability, physical or mental status or any other characteristic protected by law. We are unable to sponsor or take over sponsorship of employment visas at this time. Applicants must be eligible to work for any employer in the U.S. Kestra manufactures and provides life-saving products regulated by the Federal Food and Drug Administration and under contract with Medicare. Kestra maintains a drug free workplace and testing is a condition of employment.

Job DescriptionApplications EngineerThis exciting role will be responsible for engaging directly with clients to understand their automation needs, designing customized automation solutions, and supporting the quoting and specification process for entire automated manufacturing lines and conveyance systems. A solid understanding of industrial automation and designing robotic systems will be needed to be successful in this role. They are headquartered in the Auburn, WA area. The company specializes in providing packaging innovation at every level of the customer’s operation. The position involves a balance of design, project management, customer engagement, and hands-on technical work, requiring regular travel to customer sites to ensure successful implementation and satisfaction. If you enjoy working on a variety of projects and being client-facing, this role could be for you!Responsibilities: • Needs a proactive, positive attitude and involves regular travel (30-40% of the time) to various customer sites across Western WA., • The role will consist of about 50% field work out at client sites and 50% design work., • Automation System Design (30%): Collaborate with sales and engineering teams to scope, design, and develop automation solutions for manufacturing and packaging processes. Serve as a subject matter expert in packaging automation systems., • Proposals, Quotes & Customer Engagement (40%): Develop and present project proposals and quotes. Travel to customer sites to assess requirements and pitch tailored automation solutions., • Automation Integration & Installation (20%): Support machinery integration, assembly, and testing at company and customer sites. Participate in Factory Acceptance Testing (FAT), installation, and troubleshooting activities. Provide technical recommendations and mentor team members., • Project Management (10%): Oversee projects from inception to completion, ensuring schedules, priorities, and resources align with customer requirements. Manage personnel and maintain high levels of customer satisfaction throughout implementation., • Troubleshooting & Client Support: Provide ongoing technical support during the design and implementation phases, addressing client inquiries and troubleshooting system-related issues., • Documentation & Reporting: Prepare and maintain comprehensive documentation for each project, including specifications, proposals, and technical reports for both internal and client-facing purposes.Qualifications:, • Available to travel either by car or by air (30-40% of the time) within the Pacific Northwest area as required., • Ability to work on-site in Auburn, WA when needed., • A Bachelor’s degree in Mechatronics, Mechanical, Electrical, or Industrial Engineering or equivalent experience is required., • 5+ years of experience in automation or machine design engineering, with a focus on designing manufacturing lines and automation and robotics systems is required., • Proven ability to engage with clients, understand their needs, and deliver tailored technical solutions., • Knowledge and experience with packaging equipment and materials is preferred., • Proficient with using AutoCAD and SolidWorks, using these software to design robotics systems., • Familiarity with food industry automation equipment and systems like conveyors, robots (FANUC, Omron, SCADA, Kuka), labelers, food packaging (meat, seafood, and pet food), automated bottle fillers, etc., is preferred., • Ability to complete all responsibilities in a timely and professional manner while maintaining quality, • Excellent problem-solving skills for designing complex systems., • Effective written and oral communication skills at all levels of the organization and with customers, • Demonstrates ability and willingness to learn; owns mistakes and seeks to increase knowledgeSalary Range:, • $100,000-120,000 depending on experience.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As a Wiring Harness Engineer at Carbon Robotics be a key part of the team that designs and lays out the wiring interconnect system, testing new systems and iterating on designs with your mechanical and software peers. You'll develop system layouts, block diagrams, BOMs, and schematics in CAD, and provide manufacturing support to our CM partners. You'll do whatever it takes - which might include going to the farm - to ensure our customers have reliable and safe products. What you'll do: • Work in a fast-paced, multi-disciplinary team to design revolutionary products, • Responsible for the design (including selection of harness components and hardware, connectors, backshells, cable and wire) of electrical harnesses for power distribution, grounding, RF, communication and high-speed data signal, • Quickly prototype, troubleshoot, and iterate designs for the electrical wiring systems with ownership and deep collaboration, • Design and integration of harness routing and support brackets and writing work instructions for hardware installation, • Support the assembly and testing of cables and harnesses during initial engineering development all the way through post sales support, • Deliver results through project planning, task management and delegation and problem solving efforts to iterate quicklyKnowledge, Skills, and Abilities for Success:, • 4+ years experience as Electrical Engineer designing wiring harness for large electrical systems, • Experience with Capital Harness design software is required, • Experience working with contract manufacturing for wiring harnesses, • Experience with vehicle or automotive wiring harnesses, • Experience with high voltage (40kV+) and/or 240V harnessing design highly preferred but not required, • Experience designing wiring systems for harsh outdoor environments w/ EMI, • Experience with SOLIDWORKS highly preferred but not required, • Hands on experience in hardware debug and automated verification, • Experience with PLCs and industrial sensors/controllers a plus, • Demonstrated ability to work with a team to achieve timely objectives, • Awareness of industry standards and regulations (SAE, ISO, IPC, etc.), • Effective verbal and written communication skills and a desire to work in multidisciplinary teams Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description The Nuclear Company is the fastest growing startup in the nuclear and energy space creating a never before seen fleet-scale approach to building nuclear reactors. Through its design-once, build-many approach and coalition building across communities, regulators, and financial stakeholders, The Nuclear Company is committed to delivering safe and reliable electricity at the lowest cost, while catalyzing the nuclear industry toward rapid development in America and globally. About the role The Nuclear Company is seeking a highly skilled and meticulous Senior Software Quality Engineer to join our team. The Senior Software Quality Engineer will be a key contributor to ensuring the reliability, safety, and compliance of our software products within the highly regulated nuclear energy industry. This role will involve designing, implementing, and executing comprehensive quality assurance strategies throughout the entire software development lifecycle. The Senior Software Quality Engineer will work closely with development, engineering, and regulatory teams to ensure that our software meets the highest standards of quality, performance, and adherence to nuclear industry regulations and best practices. Responsibilities Quality Assurance Strategy & Planning: • Develop and implement robust software quality assurance plans, test strategies, and test cases for complex, safety-critical software applications., • Collaborate with development and product teams to understand requirements, define acceptance criteria, and ensure testability of features from inception., • Design, develop, and execute various types of software tests, including functional, integration, system, regression, performance, and security testing., • Utilize and implement test automation frameworks and tools to increase efficiency and coverage., • Ensure all software quality activities comply with relevant nuclear industry regulations and standards (e.g., 10 CFR Part 50 Appendix B, ASME NQA-1, NRC guidance for digital I&C)., • Develop and maintain comprehensive software quality documentation, including test plans, test reports, traceability matrices, and validation reports., • Drive continuous improvement in software quality processes, methodologies, and tools., • Promote a culture of quality, test automation, and robust software engineering practices throughout the development lifecycle., • Work closely with software development, engineering, operations, and regulatory affairs teams to ensure seamless integration of quality processes and objectives., • Bachelor's degree in computer science, Software Engineering, Electrical Engineering, or a related technical field, • 5 years of progressive experience in software quality assurance or software testing roles for complex, enterprise-level applications, • Recent experience using Playwright, • Minimum of 2+ years of direct experience in the nuclear energy industry or another highly regulated, safety-critical industry (e.g., aerospace, defense, medical devices, automotive safety systems), • Strong understanding of the full software development lifecycle (SDLC) and various testing methodologies (Agile, Waterfall), • Proficiency in designing and implementing test automation frameworks using languages like Python, Java, C#, or similar, • Experience with test management tools (e.g., Jira, Azure DevOps, TestRail) and version control systems (e.g., Git), • Software Quality Assurance (SQA) Methodologies, • Test Automation Development, • Test Planning & Execution, • Defect Management, • Regulatory Compliance (Nuclear specific preferred), • Root Cause Analysis, • Strong analytical and problem-solving skills, • Excellent written and verbal communication abilities, • Master's degree in a relevant field, • Certification in Software Quality Assurance (e.g., ISTQB Advanced Level, CSQE), • Direct experience with formal software V&V (Verification & Validation) processes for safety-critical systems, • Knowledge of industrial control systems (ICS) and operational technology (OT) software, • Competitive compensation packages, • 401k with company match, • Medical, dental, vision plans EEO Statement The Nuclear Company is an equal opportunity employer committed to fostering an environment of inclusion in the workplace. We provide equal employment opportunities to all qualified applicants and employees without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We prohibit discrimination in all aspects of employment, including hiring, promotion, demotion, transfer, compensation, and termination. Export Control Certain positions at The Nuclear Company may involve access to information and technology subject to export controls under U.S. law. Compliance with these export controls may result in The Nuclear Company limiting its consideration of certain applicants.

Job DescriptionSalary: $105,000 - 155,000 Quality Control Manager Location Varies Across the PNW | Full-Time Salary Range: $105,000 $155,000 85 Years of Building With Integrity Absher Construction has proudly served the Pacific Northwest and beyond for over 85 years. As a 100% employee-owned company, we offer more than just a jobwe offer a stake in our collective success. From fully paid employee medical coverage, to retirement benefits, paid time off, and a supportive culture, Absher is where purpose meets performance. Job Overview As a Quality Control Manager (QCM) at Absher, youll be responsible for implementing and overseeing a comprehensive project-specific quality control program. This includes managing compliance from notice of award through final completion across all scopes of work. Youll be a key team member ensuring that every project meets the highest standards of quality, safety, and performanceespecially on complex, government, or infrastructure projects. What Youll Do • Lead the execution of project-specific QC programs covering all work divisions, • Identify and resolve quality concerns early in coordination with the project team, • Prepare QC Plans, including inspection checklists, testing requirements, and Definable Features of Work (DFOWs), • Oversee QA/QC efforts of subcontractors and third-party inspection teams, • Participate in site meetings such as commissioning, 3D coordination, and pull planning sessions, • Support and mentor project team members in executing QC-related tasks, • Engage directly with owners, subcontractors, and project stakeholders to uphold quality standards, • Manage RFIs, submittals, procurement tracking, and documentation compliance, • May temporarily supplement the roles of Project Superintendent or Project Manager, • Participate in site safety audits, orientations, and investigations as needed Why Youll Be Successful You bring hands-on construction experience, technical understanding, and an unwavering commitment to doing things right the first time. Youre an excellent communicator, collaborator, and leader who takes pride in precision and professionalism. Preferred Qualifications: • Bachelors degree in Construction Management, Electrical Engineering, or related field, • 10+ years of commercial construction experience on high/medium voltage, underground, or similarly complex infrastructure, • 2+ years of QC Manager experience on NAVFAC, ACOE, or other federal projects, • Familiar with EM 385-1-1 and federal safety/sustainability protocols, • Ability to obtain or current holder of Army Corps of Engineers QCM certification, • Eligible for access to secure government work sites (some require U.S. citizenship), • Comfortable using tablets and mobile software for inspections and reporting, • Ability to commute up to 60 miles or 2 hours from home to project site, • Physically capable of lifting, standing, walking, climbing, and using field equipment as needed Absher is a Federal Contractor. All job offers are contingent upon successful background and drug screening. Physical Demands This job may be performed in the office or on the jobsite and requires frequent sitting (often working on a computer), frequent walking, standing, bending, and reaching. Heavy lifting may be needed; the employee should be able to lift items up to 40lbs. Due to computer usage, there may be repetitive motions of the hands and wrists. He/she must be able to navigate the jobsite and is expected to be able to comply with all safety regulations in the office and on the jobsite. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The responsibilities, qualifications, and work conditions described here are representative of the physical and mental knowledge, skills and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This description is not intended to be a complete list of all responsibilities, duties and skills required to personnel assigned this classification. Duties and responsibilities may be added or changed as deemed appropriate by management at any time. Why Youll Love Abshers Culture Build Security Were an ESOP companymeaning you share in our success. No buy-in required, just your best work and commitment to the team. Build Your Career We invest in your growth through technical training, certifications, leadership development, and mentorship opportunities. Build Community Absher builds the places that matter: schools, hospitals, DoD facilities, and more. We also give back through philanthropy and volunteerism. Build Values Our work is guided by four core values: • We Care About People, • We Are Servant Leaders, • We Do Things Right, • We Do Right Things Why Youll Love Abshers Benefits We believe in rewarding your work with meaningful benefits: • Employee Stock Ownership Plan (ESOP) 100% company-funded, • Annual discretionary performance-based bonus, • 401(k) with profit-sharing match, • Medical, dental & vision insurance Absher covers 100% of employee premiums, • 3 weeks vacation, 8 paid holidays, 2 floating holidays, • 7 days of sick time, • Life & disability insurance, • Education assistance & certification support, • Philanthropy & volunteer opportunities, • Service awards & employee recognition All benefits are dependent on start date and may be prorated for mid-year hires. Compensation Salary Range: $105,000 $155,000 We aim to place new hires around the 40th percentile based on experience and growth potential, ensuring a thoughtful and transparent compensation experience. Abshers Commitment: Our EEOC Pledge Absher is a proud equal opportunity employer committed to maintaining a workplace free from discrimination, harassment, and retaliation. We do not tolerate discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. We provide reasonable accommodations and are dedicated to fostering an inclusive environment that values diverse backgrounds, experiences, and perspectives. Notice to Staffing Agencies Absher does not accept unsolicited resumes from agencies without a signed agreement in place. Please remove Absher from solicitation lists unless formally engaged.

Job Description Casne Engineering is seeking a highly experienced and motivated Senior Electrical Engineer to provide electrical design and construction support services for our Engineering Services department in Bellevue, WA. This role offers the opportunity to work on complex industrial and commercial projects, utilizing advanced power system modeling and design expertise to support critical infrastructure development. About Casne Engineering Casne Engineering is an employee-owned, full-service electrical and technology consulting firm, recognized as one of the largest electrical-only design firms in the industry. Our expertise spans high-voltage power distribution, custom industrial control systems, and real-time data analytics, setting us apart from traditional MEP firms. We focus on delivering innovative, high-quality electrical engineering solutions that help clients—from small businesses to Fortune 500 companies—achieve operational excellence. Position Overview As a Senior Electrical Engineer, you will play a key role in designing power, communication, lighting, and control systems, supporting construction activities, and ensuring successful project execution. This role requires technical proficiency in power system modeling, protective device coordination, and arc flash studies, as well as strong leadership and project management capabilities. Key Responsibilities • Electrical system design for industrial and commercial applications, including:, • Medium & Low-Voltage Power Distribution Systems, • Emergency & Standby Power Systems, • Interior & Exterior Lighting, • Networking, Security, and Auxiliary Systems, • Power system analysis and modeling, including:, • Load flow studies, • Short circuit analysis, • Protective device coordination & arc flash calculations, • Provide construction support, including:, • Responding to equipment submittals and construction RFIs, • Assisting with field verification and coordination, • Facilitating project closeout documentation Required (Technical) • BSEE degree with 5-10 years of experience in the industrial sector, • Proven experience in preparing detailed construction drawings, specifications, and cost estimates, • Experience supporting construction and commissioning activities, • Proficiency in MS Office Suite, Bluebeam Revu, and PDF management, • Strong organizational and interpersonal skills with a collaborative, team-oriented approach, • Detail-oriented with the ability to prioritize multiple projects and meet deadlines, • Ability to travel to customer locations for site research, coordination, commissioning, and support, • Licensed Professional Engineer (P.E.) in Washington (other states accepted), • Experience with engineering software, including: Challenging projects. Career growth. Collaborative team. Casne Engineering offers competitive compensation, leadership opportunities, and professional development in a supportive work environment. Hybrid work arrangements may be available depending on project responsibilities. Pay information may include other compensation outside of annual salary but is not limited to the listed ranges. Company DescriptionFounded in 1979, Casne is an employee-owned, full-service electrical and technology firm with offices in Bellevue, WA and Carlsbad, CA. We deliver high-quality engineered and information systems from concept to design, implementation and on through continued support. Our goal is to assist our clients, who range from small to Fortune 500 companies, achieve operational excellence through improvements to their critical electrical and technology infrastructures. Casne prides itself on accepting the challenges of our clients and then exceeding their expectations. We offer competitive pay, employment stability, and a comfortable work setting with an energetic team of dedicated professionals. Hybrid work arrangements may be possible depending on project responsibilities. Full-time benefits include health insurance, 401k, Employee Stock Ownership Plan (ESOP), potential equity ownership, performance bonuses, educational reimbursement, HSA/flexible spending, and other fringe benefits.Founded in 1979, Casne is an employee-owned, full-service electrical and technology firm with offices in Bellevue, WA and Carlsbad, CA. We deliver high-quality engineered and information systems from concept to design, implementation and on through continued support. Our goal is to assist our clients, who range from small to Fortune 500 companies, achieve operational excellence through improvements to their critical electrical and technology infrastructures. \r\n\r\nCasne prides itself on accepting the challenges of our clients and then exceeding their expectations. We offer competitive pay, employment stability, and a comfortable work setting with an energetic team of dedicated professionals. Hybrid work arrangements may be possible depending on project responsibilities. Full-time benefits include health insurance, 401k, Employee Stock Ownership Plan (ESOP), potential equity ownership, performance bonuses, educational reimbursement, HSA/flexible spending, and other fringe benefits.

Job DescriptionWho we are Metropolis is an artificial intelligence company that uses computer vision technology to enable frictionless, checkout-free experiences in the real world. Today, we are reimagining parking to enable millions of consumers to just "drive in and drive out." We envision a future where people transact in the real world with a speed, ease and convenience that is unparalleled, even online. Tomorrow, we will power checkout-free experiences anywhere you go to make the everyday experiences of living, working and playing remarkable - giving us back our most valuable asset, time. Who you are We are seeking a Senior Computer Vision Test Engineer with a passion for quality, automation, and real-world impact. In this role, you will be responsible for designing, developing, and executing robust test strategies for cutting-edge perception systems. At Metropolis, we build complex, distributed computer vision systems that span a wide range of platforms, from cameras and embedded edge devices to large-scale cloud infrastructures. These systems power, critical, real-time decisions across parking and new verticals. As a Senior Test Engineer, you will play a pivotal role in verifying that each component in this ecosystem functions correctly in isolation and as part of an integrated system. You'll collaborate closely with engineers across software, hardware, and machine learning teams to define test coverage, develop test harnesses, and identify edge cases that impact performance in production. You will also help shape and improve our continuous integration pipelines and automated validation frameworks to support fast iteration and robust releases. What you'll do • Design and implement test plans, test cases, and test automation frameworks for computer vision and machine learning pipelines, • Validate the end-to-end performance of CV applications such as object detection, classification, and tracking under diverse scenarios and edge cases, • Analyze system-level behavior and KPIs (latency, accuracy, robustness) using metrics-driven methodologies, • Develop tools for test data generation, synthetic validation, and visualization of perception outputs, • Collaborate with software, ML, hardware, and QA teams to ensure end-to-end system validation and release readiness, • Investigate, root-cause, and document bugs and issues across the perception stack, • Drive continuous improvement in test coverage, test automation, and system reliabilityWhat we're looking for, • Bachelor's or Master's degree in Computer Science, Electrical Engineering, Robotics, or a related field, • 5+ years of hands-on experience in software or system testing, with at least 2 years focused on computer vision (CV), perception, or machine learning systems in production, • Proficiency in Python and C++ for test automation and strong experience with unit testing frameworks like GTest or PyTest, • Experience designing and implementing end-to-end test strategies for distributed systems, including using version control like Git and CI/CD pipelines like Jenkins or GitHub Actions, • Solid understanding of computer vision concepts such as detection, tracking, segmentation, and 2D/3D geometry, • Demonstrated experience testing perception or computer vision systems in real-world or hardware-in-the-loop (HIL) environments, • Familiarity with common ML frameworks like PyTorch and TensorFlow, and CV libraries like OpenCV, • Strong debugging, profiling, and log analysis skills, especially in embedded or real-world deployment environments, • Experience with containerization tools like Docker and simulation platforms such as CARLA or NVIDIA Drive Sim Metropolis values in-person collaboration to drive innovation, strengthen culture, and enhance the Member experience. Our corporate team members hold to our office-first model, which requires employees to be on-site at least four days a week, fostering organic interactions that spark creativity and connection Metropolis may utilize an automated employment decision tool (AEDT) to assess or evaluate your candidacy for employment or promotion. AEDTs are used to assist in assessing a candidate's application relative to the required job qualifications and responsibilities listed in the job posting. As part of this process, Metropolis retains data relevant to your candidacy, including personal information, for a period that is reasonably necessary for the use of the tool. If you are hired for the position, your data may become part of your employee records. Metropolis Technologies is an equal opportunity employer. We make all hiring decisions based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including gender identity, sexual orientation, or pregnancy), national origin, disability, veteran status, or any other protected characteristic under federal, state, or local law.

Job Description The Carbon Robotics LaserWeeder™ leverages advanced robotics, computer vision, AI/deep learning, and lasers to eliminate weeds with sub-millimeter accuracy—all without herbicides. This innovative solution reduces environmental impact, promotes soil health, and helps farmers address labor shortages and rising costs. Designed in Seattle and built at our cutting-edge manufacturing facility in Richland, Washington, the LaserWeeder is setting a new standard for automated weed control. With $157 million in funding from prominent investors such as BOND, NVentures (NVIDIA's venture arm), Anthos Capital, Fuse Venture Capital, Ignition Partners, Revolution, Sozo Ventures, and Voyager Capital, Carbon Robotics is driving innovation. As a no-nonsense team with a bias for action, we take pride in executing our ideas. Whether it's designing transformative technology or visiting farms to ensure our products are reliable and safe, we do whatever it takes to deliver for our customers. Working here means tackling big problems with big impact. You'll find opportunities to grow professionally, solve complex challenges, and make meaningful contributions to a mission that matters. At Carbon Robotics, we trust our team to act independently and make practical, real-world decisions. Join us as we innovate, execute, and build the future of farming together. YouTube | X | Instagram | LinkedIn | News As Carbon Robotics's Mechanical Engineering Manager, you will provide technical and business leadership and oversight while also developing and maintaining the infrastructure (organizational structures, tools, training, etc.) the ME team needs to succeed. You will be laser focused on ensuring your team can successfully architect, design, test, and sustain the primary structure, mounts, enclosures, powertrains, actuated mechanisms, and much more that form the backbone of our robotics systems. You will also coordinate heavily with the Electrical Engineering team as well as Software Engineering, Program Management, Manufacturing, and Field Support teams to ensure seamless integration and rapid delivery to market. This role reports to the Director of Hardware Engineering. You will collaborate with the Engineering leadership team to develop and deliver on capability and product innovation roadmaps. Above all, you'll do whatever it takes, including travel to customer farms and our manufacturing facilities, to ensure our customers have safe and reliable products that meet or exceed their expectations. Knowledge, Skills, and Abilities for Success: • At least 3 years experience managing and growing a mechanical engineering team that has developed, deployed, and maintained serially produced complex integrated mechanical systems (preferably robots), • Significant experience with both structural and powertrain system design, build, test, and production, • Experience with actuated systems, thermal management, enclosure design, and harsh environment protection, • Experience developing basic analysis scripts and automation tools, • Capable of operating as a Lead Engineer in your respective expertise area as needed, • Extensive experience working with TPMs to manage resources and priorities across multiple projects while maintaining quality and on-time delivery, • Experience working with a workflow management tool such as Jira and an internal documentation tool such as Confluence, • Ability to develop and mentor (both hard and soft skills) for new grad, early career, and mid-career engineers, • Excellent verbal and written communication skills and a desire to work in multidisciplinary organizations, • Ability to travel for field visits to farms and our Richland manufacturing campus. Expected travel around 10% of the time but able to do more travel during first article build and testing., • Work ~2 days a week out of our Lynnwood/South Everett office and ~3 day a week out of our downtown Seattle HQ Passion for building teams capable of solving uniquely interesting problems. Innovation while disrupting the market is what we do. Profiled in WSJ and Forbes, Carbon Robotics is poised to become the next billion dollar company in the rapidly growing worldwide Ag-Tech industry. We offer competitive compensation and benefits to our full time US based* employees, including: • Competitive salaries, • Pre-IPO Stock Options, • Generous Benefits:, • Fully-paid medical, dental, and vision insurance premiums for you and all dependents, • Choice of PPO or HDHP/HSA, • Virtual Care - Doctor on Demand, • Employee Assistance Program, • Mental Health HRA, • Restricted Healthcare Travel support, • Menopause Support, • Life Insurance, • Long Term Disability, • Flexible PTO, • 401(k) plan, • Pet Insurance, • Commuter Benefits Carbon Robotics is building a culture of diversity and inclusion for all. We welcome everyone's voice and believe in open and transparent communication. We believe the best products, services, and companies are built by strong teams that include a diversity of backgrounds, perspectives, ideas, and experiences. We are committed to supporting and enabling growth and opportunity for every employee at every level. This is the foundation to which we will build a truly unique environment. We are equally committed to equal employment opportunity, and it is foundational to how we recruit and hire our talented team. Employment is determined based upon capabilities and qualifications without discrimination on the basis of race, creed, color, religion, sex, gender identification and expression, marital status, military status or status as an honorably discharge/veteran, pregnancy (including potential pregnancy, pregnancy-related conditions, and childbearing), sexual orientation, age (40 and over), national origin, ancestry, citizenship or immigration status, physical, mental, or sensory disability , HIV/AIDS or hepatitis C status, genetic information, status as an actual or perceived victim of domestic violence, sexual assault, or stalking, or any other protected class as established by law. #talentacquisition #laserweeding #laserweeder #weedcontrol #agtech #agtechnology #farmtech #robotics #lasers #lasersandrobots #missiondriven #AI #startup #wearehiring #computervision #machinelearning #carbonrobotics

Job Description Madden Industrial Craftsmen is looking for a BUILDING ENGINEER to join a commercial team in Bellevue. This is a direct hire position! Candidates will have daily contact with tenants requiring customer service skills and they will also relate well with other members of the property management team. He/she will be knowledgeable in basic plumbing, electrical and mechanical equipment and have the ability to read blueprints and work independently. This position is responsible for the preventative maintenance and ongoing maintenance and repair of all major building systems including HVAC, mechanical, electrical, security and plumbing, as well as responding to tenant requests. Shift Monday - Friday 7:00 - 3:00 BUILDING ENGINEER RESPONSIBILITIES * Establish and maintain a relationship with tenants, contractors and vendors for goods and services required for daily efficient building operation. * Respond to and handle service requests from tenants in conjunction with property management work order system. * Perform or coordinate with outside vendors to perform preventative maintenance/maintenance or repair of all building systems including plumbing, HVAC, mechanical, electrical, and energy management systems. * Program and maintain the building’s automation systems, HVAC, life safety and security controls. * Have knowledge of low/high voltage electrical systems. * Have knowledge of all fire/life safety systems including alarms, fire sprinklers, standpipes, smoke/heat sensors, emergency lighting, public address systems, elevator recall, etc. * Be knowledgeable of and maintain records of all locking hardware and lock systems in the building. * Assure time and materials are recorded and charged. * Assure general cleanliness of all shops, storage, mechanical, and common areas. * Operate and maintain energy, management, security and fire/life safety surveillance systems as required. Operate and schedule maintenance of fire/life safety systems as required. * Be a part of the building fire and life safety team. Conduct and coordinate with outside vendors fire and life safety system testing and maintenance. BUILDING ENGINEER REQUIREMENTS * Must have solid understanding of contracts associated with operation of buildings. * Must have knowledge of all building systems including HVAC, plumbing, mechanical, security, electrical, and energy management systems. * Ability to use various hand tools. * Ability to read and understand construction drawings and specifications. * Strong time management, record keeping, multi-tasking and decision making skills. * Basic skills in software such as Microsoft Excel, Word, SharePoint and Outlook. * Must be able to pass a pre-employment drug test and background check. * Must have a clean driving record. * This person must be capable of attaining a Washington 07-Electrical license. $95,000-110,000/year #zr #MON

Job DescriptionOverview Company Overview: Join Allied Universal® Technology Services, a global leader in transforming the security industry. We integrate advanced technology - video surveillance, electronic access control, alarm monitoring and augmented solutions with physical security to help people feel safe. Whether you're an installation technician, service technician, engineer, or project manager, you'll discover rewarding opportunities to grow your career as part of a valued team. Apply today and be phenomenal-build a meaningful career while protecting what matters most through innovative security technology. Job Description: Job Description What to expect as a Commercial Security Service Technician: Pay Range: $40/hr-$60/hr The Security Service Technician will be responsible for service, maintenance, repairs, and troubleshooting/diagnostics on access control equipment and IP-based video systems, including but not limited to: electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems, and intercom systems. • Travel to commercial client sites to service, repair, troubleshoot, and detect access control equipment and IP-based video security systems. including, but not limited to:, • (Electrified and non-electrified locks, card readers, ancillary door devices, IP and analog cameras, head-end video recording devices, wired and wireless systems and intercom systems), • Troubleshoot system installations in such a manner as to identify issues and to apply the most effective and efficient resolution consistent with company installation standards; identify and repair physical security systems as required to ensure operability and compliance with any applicable building code, • Apply all necessary documentation for tracking of service-related issues, • Demonstrate knowledge and skill in the safe use of hand and power tools, analog and digital test equipment and CCTV testing devices, • Demonstrate proficiency in reading and understanding electrical schematics, CAD drawings and related documents for their use in low voltage applications, • Establish and maintain effective working relationships with both internal and external customers, • Provide phone and on-line remote diagnostic support, • Drive to commercial client sites with a company-issued vehicle to perform service, • A high Degree, Vocational School or equivalent required, • 2+ years of field experience, • Experience with any or all of the following is preferred: Software House, Lenel, AMAG, S2, Brivo, Milestone, Exacq, Axis, Bosch, Commend, DMP, Open Options, Notifier, Fluidmesh or ONSSI, • Possession of state-specific licensing (i.e. Class D or Alarm Installer, etc.) or ability to hold license once hired, • Understanding of Windows operating systems and overall IT network topology, • Highly proactive and skilled individual, and at all times maintain performance consistent with Allied Universal Technology Services (AUTS) core values, • Ability to meet deadlines and work in a fast-based environment with minimum direction, • Good communication skills for effective interaction with internal & external customers, • Available for scheduled “on-call" duties to respond to emergency service calls, • Strong troubleshooting skills and mechanical and electronic aptitude, • Capable of lifting up to 50lbs and work on ladder heights of up to 16', • Be able to work independently or as a member of a team, • Medical, dental, vision, basic life, AD&D, and disability insurance, • Enrollment in our company's 401 (k) or Supplemental Income Plan, subject to eligibility requirements, • Eight paid holidays annually, five sick days, and four personal days If you have any questions regarding Equal Employment Opportunity, have difficulty using the online system and require an alternate method to apply, or require an accommodation at any time during the recruitment and/or employment process, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1446688

Job Description JOB DESCRIPTION A client of Insight Global is hiring several ADMS/SCADA System Engineers to work in one of the following locations: Seattle, WA, Melbourne, FL, Atlanta, GA, Milford, OH, or Albany, NY. Key Responsibilities: Design, implement, and optimize ADMS solutions to enhance operational efficiency and meet business objectives. Lead the deployment and upgrade of ADMS systems, ensuring minimal disruption and adherence to best practices. Collaborate with stakeholders to align ADMS capabilities with organizational goals. Perform system integration, configuration, and performance tuning of ADMS components including: DMS Applications DNAF OMS Storm Assist DER Conduct fit-gap analysis and lead testing, validation, and documentation of system changes. Ensure high availability, reliability, and performance of ADMS platforms. Provide technical leadership during implementation and support phases. Maintain compliance with NERC CIP and other regulatory standards. Direct experience installing, maintaining, or supporting ADMS products. Strong understanding of SCADA, OMS, AMS, and modeling tools. Experience with both Transmission and Distribution electrical grid systems. Familiarity with User Interface design and system modeling. Hands-on experience with: C, C++, C# Oracle SQL Linux, Windows Python, Docker, Jenkins Jasper Reports, Cassandra Solid grasp of TCP/IP, IP addressing, routing, LAN, DNS, Active Directory, firewalls, and switches.

Type of Requisition: Pipeline Clearance Level Must Currently Possess: None Clearance Level Must Be Able to Obtain: None Public Trust/Other Required: None Job Family: SCA Job Qualifications: Skills: Blueprints, Drawing, Shipbuilding Certifications: None Experience: 8 + years of related experience US Citizenship Required: Yes Job Description: Engineering Technician V This is a waterfront shipboard construction and re-modernization position, working within shipyards and drydocks onboard U.S. Naval ships. The incumbent will be working in varying temperatures of high heat in the summer and cold in the winter preforming the following tasks: 1, Installs, maintains, repairs, overhauls, troubleshoots, modifies, constructs and tests electrical, electronic, and mechanical equipment and related devices. 2, Applies technical knowledge of electronics principles in order to put equipment in operational condition and solve complex problems. 3, Troubleshoots and corrects malfunctions using specialized test and diagnostic equipment. 4, Modifies circuitry to improve performance. 5, Makes recommendations for improvements or modifications to correct problems. 6, Provides operation and maintenance instruction to customer personnel. 7, Prepares operating and malfunction reports and related documentation. 8, Works with engineering staff to determine and solve equipment design problems. 9, Performs quality assurance testing of assemblies and equipment fabricated by other technicians. 10, Provides work leadership to less-experienced technicians, and may have supervisory responsibility. 11, Participates in special projects, as required. WHAT YOU'LL NEED TO SUCCEED: • Education: Associates of Arts/Associates of Science., • Required Experience: 8+ years of related experience., • Security Clearance Level: None., • Location: Customer Site., • US Citizenship Required. GDIT IS YOUR PLACE: • 401K with company match, • Comprehensive health and wellness packages, • Internal mobility team dedicated to helping you own your career, • Professional growth opportunities including paid education and certifications, • Cutting-edge technology you can learn from, • Rest and recharge with paid vacation and holidays. The likely hourly rate for this position is between $34.35 - $46.47. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range. Scheduled Weekly Hours: 40 Travel Required: 10-25% T elecommuting Options: Onsite Work Location: USA WA Seattle Additional Work Locations: Total Rewards at GDIT: Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. GDIT typically provides new employees with 15 days of paid leave per calendar year to be used for vacations, personal business, and illness and an additional 10 paid holidays per year. Paid leave and paid holidays are prorated based on the employee's date of hire. The GDIT Paid Family Leave program provides a total of up to 160 hours of paid leave in a rolling 12 month period for eligible employees. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most. We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology. Join our Talent Community to stay up to date on our career opportunities and events at gdit.com/tc . Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

Job Description Position Overview: The Test Cell Technician will coordinate all activities with Test Cell Lead and Quality Assurance Lead. Work involves interaction with co-workers, management and customers; must be able to work independently and within a team environment. Principal Duties and Responsibilities (Essential Functions): Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Generator set hookup, testing, and disconnection and cleaning after test. Data recording during test., • Recognizing nonconformities and troubleshooting electrical and mechanical problems under guidance., • Cleaning and organizing test cell when not in operation., • Assisting with assembly and other production tasks as needed., • Ability to work independently and on a team., • Ability to clearly communicate questions and findings., • Basic knowledge of and experience servicing internal combustion engines (diesel preferred). Basic knowledge of single-phase and three-phase AC power. Experience using digital multi-meters and other electrical measurement tools., • Understanding of basic DC control elements such as switches and delay timers., • Ability to read and understand electrical drawings., • Good organizational skills., • High School diploma. Minimum 1 year relevant technical training., • Experience with diesel generator sets., • Experience with marine generator sets., • Experience with low-voltage DC controls and wiring. Experience with AC power installations., • Own set of basic hand tools (metric and SAE combination wrenches, 1/4” & 3/8” drive ratchets and sockets, screwdrivers and pliers) While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions. The noise level in the work environment can be loud. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. Other Criteria: • Complies with Company policies and procedures., • Performs job safely with respect to others, property and to individual safety., • Works effectively with others in the Company to encourage teamwork and productivity.

Job DescriptionCompany Description BMW of Bellevue is seeking talented and passionate Automotive Technicians of all levels of experience to consider career paths working with The Ultimate Driving Machine. Located just 25 minutes north of Seattle, Bellevue offers a modern vibe with thriving commercial districts making this city more popular than ever! BMW of Bellevue also just moved into their brand-new state of the art facility - 50 bays means plenty of work! If you want more out of your automotive career, please submit an application for consideration. Excellent lifelong career opportunities await at an Authorized BMW Center near you. Job Description As a BMW Technician, you will be responsible for performing diagnoses, repairs, and maintenance work for customer and dealership vehicles. You’ll be at the forefront of innovative automotive diagnostic technologies. • Receiving and carrying-out Repair Orders as dispatched., • Performing diagnostic services and troubleshooting to determine repair needs., • Providing labor, time, and parts estimates for repair services., • Performing high quality and efficient repair services for various automotive systems, including engine, steering, suspension, brakes, and air conditioning in accordance with Center and Factory standards., • Performing Quality Control checks for repaired vehicles to ensure repairs are complete., • Completing all required paperwork and documentation for repair services., • Maintaining organized, clean workspace and accounting for dealership and personal tools at all times., • Communicating directly and efficiently with Service Advisors and Parts Department Employees., • Participating in continual BMW proprietary training/education programs to hone skills and develop expertise in industry-leading BMW automotive technologies and processes., • Demonstrating behaviors consistent with Employer's values in all interactions. You’re a passionate, skilled, and dedicated individual who is excited by the opportunity to work on The Ultimate Driving Machine. You’re highly self-motivated and detail-oriented with solid organizational and time-management skills. You’re excited about innovative technologies, ideally have previous European brand service repair experience, and are committed to Fix it Right the First Time to provide the ultimate customer experience. Qualifications • High school diploma or equivalent., • Possess great mechanical, electrical, and computing skills., • Be 18 years of age or older., • Own a valid driver’s license., • At least 2+ years previous of hands on automotive repair experience in a professional environment or equivelant., • Previous European automotive technician experience a plus, • ASE certifications a plus, • Must be authorized to work in the USA., • Must perform duties and responsibilities in a safe manner., • Must be able to demonstrate ability to pass pre-employment testing to include background check, MVR check, and maintenance of a valid driver's license. Additional Information The average Automotive Technician salary in Bellevue, WA is $73,734 as of October 01, 2024, but the salary range typically falls between $64,727 and $81,795 Disclaimer: Salary ranges can vary widely depending on the city and many other important factors, including education, certifications, additional skills, the number of years you have spent in your profession. All your information will be kept confidential according to EEO guidelines.

Job Description Chief Engineer / Electrician (Facilities Maintenance) – Seattle WA Federal O&M Contractor seeking full-time Facilities Electrician for long term employment opportunity within Federal Building and US Courthouse. Must have 3-5 yrs recent exp. in commercial or industrial electrical, mechanical, structural & architectural maintenance services in commercial facilities. Must have 07 electrical Lic. Must possess ability to communicate well with constituents, be self-motivated, conscientious, hardworking & honest. Must be able to work independently, be self-motivated, conscientious, hardworking & honest. Must be willing to submit to a Security Background Check. This position is under a Collective Bargaining Agreement and would require membership in Local Trades Union; benefits include Pension, Health & Welfare, Paid Vacation, Sick Leave and Holidays. 23160 ELECTRICIAN, MAINTENANCE An Electrician performs a variety of electrical trade functions such as the installation, maintenance, or repair of equipment for the generation, distribution, or utilization of electric energy. Work involves most of the following: installing or repairing any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment; working from blueprints, drawings, layouts, or other specifications, locating and diagnosing trouble in the electrical system or equipment, working standard computations relating to load requirements of wiring or electrical equipment, and using a variety of electrician's hand tools and measuring and testing instruments. In general, the work of the maintenance electrician requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Company DescriptionFederal Construction Contractor with contracts throughout US Federal Operations & Maintenance Contractor with contracts throughout USFederal Construction Contractor with contracts throughout US\r\nFederal Operations & Maintenance Contractor with contracts throughout US

Job DescriptionSalary: Commercial Fire Protection is seeking experienced Fire Alarm Technicians. There's never been a more exciting time to join our team! We are in an accelerated growth phase in a rapidly expanding industry and are seeking motivated, self-driven individuals looking for a long-term career in the Seattle - Renton area. Responsibilities include servicing, inspecting and testing fire alarm systems to the prescribed standards; performing on-site emergency troubleshooting; programming and repairs of our customers fire alarm systems; identifying code and non-conformance issues; and preparing accurate and timely service tickets and reports. Duties may also include the installation of fire alarm systems. Skills/Qualifications: 2+ years of experience in low voltage electrical systems, including Fire Alarm High School Diploma or equivalent Experience in reading and interpreting blueprints, submittals, and operational/product manuals Knowledge of test equipment, multi-meter, digital analyzer, and commissioning devices Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Ability to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc. Ability to work flexible hours including weekends to meet customer requirements Demonstrate a high level of customer service, strong organization skills, and positive attitude Maintain truck inventory to ensure timely response to customer needs. Ability to adhere to, implement, and follow safety guidelines and procedures at all times Seattle FA-1 , And Nicet 2 Fire Alarm Possess a valid drivers license and driving record that meets company requirements Pass a pre-employment background check Perform other duties as assigned Benefits:Commercial Fire Protection is pleased to offer a compensation package which includes:Competitive hourly rate, medical, dental, vision,401k, life insurance, paid time off and holidays, supportive team environment, laptop, company vehicle, tuition reimbursement, and career advancement opportunities. All qualified applicants to Commercial Fire Protection are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran's status or any other protected characteristic. Primary Location US-WA-Seattle - Renton

Job DescriptionSalary: WaveWorks makes wireless communication solutions for the next wave of connected devices. Our technology delivers ultra-low power, small form factor, and standards-compatible wireless communication by reflecting, rather than emitting, energy. This backscatter-based approach enables orders of magnitude lower power consumption while maintaining long range and high reliability. WaveWorks is expanding our engineering team and searching for high-performing, dedicated individuals to help us blaze new trails. Were seeking a hands-on Lab Technician to support the assembly, rework, and testing of WaveWorks ultra-low-power wireless and sensing technologies. The ideal candidate combines strong practical electronics skills, precise workmanship, and disciplined organization. Much of the work will center around fine-pitch SMT assembly and rework, prototype preparation, and maintaining high-quality electronics lab procedures. This is an on-site role based in Seattle, WA. ROLE • Assemble and rework prototype electronic boards and subassemblies using fine-pitch surface-mount soldering techniques, • Perform board-level inspection, debug, and bring-up under engineering direction, • Organize and maintain lab tools, components, and documentation to ensure traceability and repeatability of test builds, • Support engineers in prototype validation and measurement activities (e.g., using oscilloscopes, VNAs, and spectrum analyzers), • Prepare, label, and maintain hardware inventories and version control logs, • Contribute to fixture fabrication and wiring for test setups and long-term reliability experiments REQUIRED QUALIFICATIONS • Formal training or substantial hands-on experience in electronics (academic, professional, or hobbyist / maker environment), • Proven skill in SMT soldering and rework, including fine-pitch components and reflow processes, • Strong organizational skills and exceptional attention to detail in handling hardware, documentation, and version control, • Basic proficiency with lab instruments such as multimeters, oscilloscopes, and power supplies, • Ability to follow technical instructions, schematics, and assembly procedures, • Clear, reliable communication and a methodical, ownership-oriented work style PREFERRED QUALIFICATIONS • Experience with RF test or measurement setups (VNA, spectrum analyzer), • Familiarity with test data logging or simple automation, • Associates or Bachelors degree in Electrical Engineering, Physics, or related field is a plus WaveWorks backscatter technology is redefining wireless connectivity for low-power devices across industrial sensing, wearables, and peripherals. Join us as we turn this next generation of wireless into reality. WaveWorks is committed to a friendly and welcoming working environment and offers a comprehensive benefits package for full-time employees. We do not discriminate based on race, gender, age, religious affiliation, or any other legally protected status.