Electrical testing jobs in New Rochelle, New YorkCreate job alerts

Job Description As a General Automotive/R&R Technician you will be called upon to service a broad range of vehicle repair issues and to quickly identify the cause of performance problems. Position Responsibilities: • Inspect, diagnose and repair vehicle automotive systems, • Remove and Reinstall Transmission systems., • Assist other technicians in performing technical activities, • Explain problems discovered during vehicle inspection to service writers and technicians, • Continuously learn new technical information, equipment, tools and repair techniques, • Competitive compensation packages based upon experience, • Daytime work hours, • Paid Time off, • Access to AAMCO’s proprietary training programs, seminars and skill presentations, • Live technician support hotline capable of troubleshooting any problem encountered in your center, • An AAMCO Career Path, a formal plan, designed to take you anywhere in the Automotive Industry. We offer a Career not just a Job., • Clean, safe environment, • Minimum of 3+ years’ experience working as a General Automotive Technician, • Own professional grade tools to service any general repair need, • Experience troubleshooting and conducting both mechanical and electrical diagnostics, including drivability testing e7PNE5HLsQ

Job Description General Summary Performs general maintenance and repair of equipment and buildings requiring practical skill and knowledge (but no proficiency) in such trades as painting, carpentry, plumbing, masonry and electrical work. Essential Duties and Responsibilities • Replaces electrical receptacles, wires, switches, fixtures, and motors., • Uses plaster or compound to patch minor holes and cracks in walls and ceilings., • Repairs or replaces sinks, water coolers, and toilets., • Paints structures and equipment., • Repairs or replaces concrete floors, steps, and sidewalks., • Replaces damaged paneling and floor tiles., • Hangs doors and installs door locks and replaces broken window panes., • Performs general maintenance on equipment and machinery., • Other duties as assigned. Knowledge, Experience and Skill Requirements • GED or High School Graduate, • Experience working in an outdoor or indoor building environment, • Able to understand verbal or written direction from lead, supervisor or other craftsmen Work Environment • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc., • Must be able to pass a local background check and have the ability to obtain and maintain clearance after hire. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $26.87. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred

Job Description Job Title: Optical Engineer & Color Scientist Location: Port Washington, NY Position Summary: The Optical Engineer will lead end-to-end optical system design, LED Selection and color science development for advanced LED lighting products across downlighting, projection, track, and linear platforms. This role combines deep expertise in photometric analysis, spectral modeling, LED package characterization, optical simulation, and standards compliance. The ideal candidate will be highly skilled in designing optical architectures for COB and discrete LED engines, optimizing beam performance, color quality, efficacy, and ensuring compliance with emerging Dark Sky, WELL standards and other sustainability standards. This position collaborates closely with product management, mechanical engineering, electrical engineering, and manufacturing teams to deliver world-class optical and color-rendering performance. Key Responsibilities: Optical Design & Engineering • Lead the design and development of complete optical systems for COB, discrete LED, and multi-source architectures., • Create optical solutions for downlights, projectors, wall washers, track heads, and linear systems using reflectors, TIR lenses, hybrid optics, mixing chambers, and light guides., • Perform optical simulations and ray-tracing (e.g., LightTools, TracePro, Zemax, SPEOS) to optimize beam quality, output, UGR, and efficiency., • Develop beam distributions including spot, narrow, medium, wide, oval, asymmetric, wall-wash, and custom profiles., • Evaluate and specify secondary optics from global suppliers; interpret intensity distribution, candela plots, IES files, and lens datasheets.LED Selection, Color Science & Photometry, • Conduct in-depth analysis of LED specification and color science including spectral power distribution (SPD), wavelength curves, CCT, CRI/TM-30, Duv, gamut, R9/Rf/Rg, and full binning structures., • Evaluate and compare LED packages from major suppliers (e.g., Cree, Nichia, Citizen, Lumileds, Samsung, Seoul, Luminus, Bridgelux)., • Interpret LED manufacturer data including LM-80, IS, TM-21/TM-28, TM-30, thermal derating, voltage/current curves, and optical efficiency., • Develop color mixing strategies for tunable white and RGB/RGBW systems including chromaticity stability, thermal droop compensation, and spectral optimization., • Optimize color mixing strategies with optical designs for various products., • Support calibration, tolerance analysis, and performance modeling for optical and chromatic uniformity.Standards Compliance & Sustainability, • Ensure optical and color performance meets or exceeds industry standards including:, • LM-80, LM-79, TM-21, TM-30, TM-20, • Zhaga, ANSI, IES, UL/ETL, cUL, CCC, TISI, etc., • WELL Building standards, Dark Sky / IDA compliance, Turtle Friendly applications (uplight control, CCT limits, spectral considerations), • Apply eco-design principles related to efficacy, energy use, material choices, and emerging sustainability requirements.Optical Prototyping, Testing & Validation, • Lead photometric validation, lab testing, and prototype evaluation to verify distribution, color consistency, and system efficacy., • Working with the test team in our China factory, interpret data from goniophotometers, integrating spheres, and spectrometers., • Support thermal-optical trade-off analysis and long-term lumen maintenance modeling.Cross-Functional Collaboration, • Working closely with multiple development teams, Global R&D (primary function), Functional R&D, Modern Forms R&D, Schonbek R&D, to support incoming projects, support and recommendations, evaluations and feedback etc., • Work closely with product managers to convert market/architectural needs into optical requirements., • Partner with mechanical engineers to integrate optics into housings, heatsinks, trims, and glare-control systems., • Provide technical guidance to NPI, quality, and manufacturing teams for LED selection, optics sourcing, and supplier qualification., • Support a multi-year global product roadmap aligned with commercial growth objectives., • Support high-quality product specifications, business cases, and PRDs (Product Requirement Documents)., • Support comprehensive competitive analysis, positioning frameworks, and training deliverables., • Regular performance analysis and competitive comparisons of WAC Products optics & fixture performance vs the market, • Develop new products that meet leading sustainability and material transparency standards, including RED List compliance, DECLARE certification, and WELL Building Standards., • Support and maintain a robust system to track material composition, supplier data, and documentation required for Environmental Product Declarations (EPDs)., • Integrate eco-design principles into the product development process to reduce environmental impact, improve material efficiency, and support circularity., • Support product documentation, transparency data, and sustainability attributes are readily available to meet growing specifier and regulatory requirements., • Drive adoption of sustainability-focused product features that increase market competitiveness and support environmentally driven project specifications. Requirements: Education • Bachelor’s degree in Engineering, Industrial Design, Architecture, Business, or related field required., • Master’s or PHD degree (Optical Engineering, Physics, Color Science, Photonics, or related field) preferred but not required.Technical Expertise, • 5–10+ years of optical engineering experience in the LED lighting industry., • Strong proficiency in optical simulation tools (Zemax, LightTools, TracePro, OpticStudio, etc.)., • Demonstrated experience designing optics for:, • COB LED systems, • Discrete LED arrays / boards, • Downlights, projectors, linear, wall wash, accent lighting, • Deep knowledge of LED color science, SPD analysis, binning, and photometric evaluation., • Strong understanding of optical materials, TIR lenses, reflectors, micro-optics, diffusers, and color-mixing chambers., • Able to read and interpret spectral graphs, candela plots, IES files, LED datasheets, and thermal-electrical curves.Industry & Standards Knowledge, • Familiarity with major LED suppliers and their product ecosystems., • Comprehensive knowledge of LM-80, LM-79, TM-21, TM-30, TM-20, ANSI C78.377, WELL, IDA/“Dark Sky,” and related industry protocols., • Experience with performance modeling of efficacy, CCT/CRI stability, and thermal behavior., • Experience in tunable white, human-centric lighting, UV/IR LEDs, or narrow-band LED design., • Familiarity with goniophotometer software, integrating sphere systems, and hands-on optical prototyping., • Knowledge of environmental product declarations (EPDs), eco-design standards, and green-building frameworks.Professional Skills, • Strong analytical, experimental, and problem-solving abilities., • Excellent communication and documentation skills; able to translate complex optical science for cross-functional teams., • Ability to manage multiple projects, meet deadlines, and support rapid development cycles., • Comfortable working with global teams and vendors.Travel Requirements, • If not located at NY HQ, travel at least 6x per year to HQ for team meetings., • International travel 30–40%, primarily to our factories in China and Thailand., • Additional travel to global trade shows (Lightapalooza, LEDucation, Light & Building), industry conferences (IALD), customer sites, and Company Launch Events. We recognize people as our most valuable asset. Our competitive salary and benefits package includes: paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please apply as directed. Given the high volume of responses, only qualified candidates will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all of its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities. Monday through Friday, 8am - 5pm Monday through Friday, 8am - 5pm

Job DescriptionGreetings from Donato Technologies Inc. We have an immediate opening with my client. If you are looking for a new project, please send me a copy of your updated resumes Electrical Testing TechnicianLocation: Nassau County, NY (Remote with fieldwork as required) Employment Type: Full-Time About the Role We are seeking a highly skilled NETA III Electrical Testing Technician to join a leading electrical testing and maintenance services provider. The ideal candidate will have extensive hands-on experience with high, medium, and low-voltage systems, ensuring the safe and reliable performance of electrical equipment across a variety of client sites. This role is best suited for professionals who excel in technical diagnostics, field testing, and team leadership, while adhering to industry standards and safety protocols. Key Responsibilities • Electrical Testing & Diagnostics, • Perform advanced testing on electrical equipment including circuit breakers, transformers, switchgear, motors, PTs, CTs, and cables., • Utilize specialized testing equipment such as Doble power factor test sets, low resistance ohmmeters, VLF test sets, insulation resistance testers, CT ratio/saturation devices, DC hi-pot testers, TTR instruments, and primary/secondary injection tools., • Troubleshooting & Repairs, • Identify, analyze, and resolve electrical issues using schematics, manuals, wiring diagrams, and engineering input., • Recommend and oversee repairs or replacements to ensure optimal system performance., • Maintenance & Compliance, • Inspect, clean, and maintain electrical equipment in compliance with industry and NETA standards., • Conduct risk assessments and enforce OSHA and company safety protocols., • Project Management & Leadership, • Oversee field service projects, ensuring on-time and within-scope delivery., • Mentor junior technicians and support their technical growth., • Collaborate with engineers, project managers, and clients to align project execution with client needs., • Documentation & Reporting, • Maintain accurate records of test results, inspections, and service activities., • Prepare detailed reports to ensure client transparency and compliance. Qualifications • Associates or Bachelors degree in Electrical Engineering, Electrical Technology, or related field (or equivalent military/field experience)., • NETA Level III Certification (required); NETA Level IV preferred., • 57+ years of electrical testing and maintenance experience (480V750kV)., • Strong knowledge of switchgear, transformers, motors, PTs, CTs, and protective relays., • Proficiency in interpreting electrical drawings, schematics, and wiring diagrams., • Proven leadership skills with ability to mentor junior staff., • Excellent communication and report-writing skills., • Physical ability to climb ladders, work in field conditions, stand for long periods, and lift up to 70 lbs., • Valid drivers license with clean record., • Ability to pass pre-employment drug screen, background check, and physical/respiratory fit test., • Flexibility to work overtime when required. Compensation & Benefits • Competitive salary based on experience., • Medical and dental insurance., • 401(k) retirement plan., • Paid vacation, sick leave, and holidays., • Participation in Employee Stock Ownership Plan (ESOP)., • Career development, training, and growth opportunities. Pre-Employment Screening All candidates must pass a background check, drug screen, and may be required to complete a physical/respiratory fit test prior to employment. Jennifer Sampson Technical Recruiter ....................................................... DONATO TECHNOLOGIES, INC 12100 Ford Rd, #306, Dallas, TX 75234 Direct : (469)-342-0401 Email: Web:

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job Description General Summary Responsible for supervising work crews in maintenance and repair assignments to maintain quality control and safe facility environments. Position may also supervise HVAC, plumbing, carpentry and paint crews. May direct through lead employees in order to maximize productivity. Responsible for overseeing the work of J&J subcontractors that are working onsite. Essential Duties and Responsibilities • Schedules maintenance personnel by scheduling preventative/corrective maintenance, work orders, instructing technicians on daily routines, preventative/corrective maintenance and work orders, • Completes administrative duties by assisting with interviewing and hiring duties, counseling and disciplining personnel, ensuring parts are ordered/stock and equipment manuals are updated, • Maintains maintenance operations and sets priorities by inspecting production operations, ensure production is maintained, supervise technicians to ensure work is being done accurately and on time., • Contact subcontractors when needed and supervise their work., • Serves as the preventative and corrective maintenance expert for the team to come to for guidance and direction., • Act as the primary corporate liaison for all aspects of contact with the Supervisor Maintenance, ensuring clear communication, coordination, and adherence to corporate policies and standards, • Investigate equipment failures and issues to diagnose faulty operation, and to make recommendations to project manager, O&M team and FM staff., • Performs frequent Quality Control (QC) inspections, initiates, oversees, and documents corrective and preventative actions in support of the QC program, • Prepare monthly reports as assigned; review assigned service orders monthly to determine percent complete in order to invoice the government., • Perform over the shoulder inspections and help maintain a safe work environment., • Responsible for parts and materials needed for on time maintenance, coordinates requisitions with the Purchasing Department., • Develops thorough price estimates for projects outside of current contracts., • Assist lead workers with communication between staff and the customer., • Supervises the completion of necessary documentation., • Create and maintain work order logs and reports., • Instructs and trains technicians on safety procedures by conducting safety meetings and training on proper usage of equipment, inspecting tools and work areas, • Identifies new parts needed and coordinates requisitions with the Purchasing Department., • Experienced in a healthcare facility accredited by NFPA, OSHA, and GSA Guidelines, • Certified Facility Manager Certification (CFM) is preferred., • Knowledge of NFPA, ASHRAE, Joint Commissioning, proper repair and maintenance requirements for federal facilities, grounds and utilities., • Must be thoroughly familiar with Operations and Maintenance requirements, procedures and the elements., • Knowledgeable and skilled in the operation, repair and maintenance of HVAC systems, building automation systems, electrical, plumbing and mechanical systems, medical gas, fire systems, and security systems., • Experienced with Maximo or other CMMS system is highly desired., • Ability to read and understand blueprints., • Effective oral and written communications skills., • EPA Reg. Refrigerant certification preferred., • OSHA 10-hour or OSHA 30 hour preferred (Obtainable within one year of employment)., • May be needed after hours for emergency repairs., • Excellent oral and written communication skills., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, etc., but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc., • Must be able to pass a local background check and have the ability to obtain and maintain public trust clearance after hire. Disclaimer This job description is subject to change by the employer as the needs of the employer and requirements of the job change. We maintain a drug-free workplace and perform pre-employment substance abuse testing. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The base salary range for this position is $115,000 to $135,000. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. Due to compliance requirements imposed by a federal contract, this position may be filled by U.S. Persons only. U.S. Persons includes: U.S. citizens, U.S. nationals, lawful permanent residents, individuals granted refugee status in the U.S., and individuals granted asylum in the U.S. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description General Summary We are seeking a skilled HVAC Technician to join our team to be responsible for the installation, maintenance, repair, and servicing of heating, ventilation, and air conditioning systems. The ideal candidate will have a strong technical background, excellent problem-solving skills, and the ability to work independently and as part of a team. The HVAC Technician will ensure optimal performance and safety of HVAC systems in compliance with industry standards and regulations. Installs, maintains, services and repairs environmental-control systems; utilizing knowledge of refrigeration theory, pipefitting and structural layout. Essential Duties and Responsibilities • Installation, service, troubleshooting and repairs including but not limited to; chillers, air handling units, controls, package units, split systems, exhaust fans, refrigerators, freezers, hot/chilled water pumps. Involvement in Site’s predictive maintenance program so previous experience is highly desirable., • Tasks ranging from operation of systems to the examination and evaluation of equipment to determine needed repairs, • Installs refrigeration and air conditioning systems by positioning compressors, motors, condensers, humidifiers, evaporators, heaters and other components in accordance with design specifications., • Charges refrigeration systems with refrigerant gas tests for leaks., • Starts unit and adjusts it for proper cut-in and cut-out of refrigeration units, humidifiers, heaters, air cleaners, and circulating pumps., • Adjust systems for optimal performance., • Maintains refrigeration and air conditioning systems by checking performance and determining problems. Repairs, adjusts, or replaces defective elements., • Installs, maintains and repairs the electrical and pneumatic systems associated with refrigeration and air conditioning equipment from the safety switch throughout the equipment., • Installs, maintains, repairs, operates all types centrifugal and reciprocating refrigeration/air-conditioning systems; also all types of pneumatic/electro-mechanical temperature controls., • Performs necessary plumbing procedures to ensure operation of systems and equipment, • Performs preventive maintenance., • Involvement in Site’s predictive maintenance program., • Performs other duties and shift coverage, as required. Knowledge, Experience and Skill Requirements • Must have EPA certification per CFR part 82f (Universal preferred) for servicing and recovery of refrigerants., • Ability to read blue prints, sketches, and specifications pertaining to air conditioning and refrigeration systems; to follow oral instructions; to use shop mathematics; to lay out work., • Minimum 4 years of experience performing the specific craft function or certification from a recognized trade school., • Requires broad trade knowledge of mechanical principals on standard shop methods of the Refrigeration and Air Conditioning Mechanic Trade., • Experience and/or certification in one or more predictive maintenance technologies (vibration analysis, infrared, ultrasound, etc.)., • High level of computer aptitude and knowledge of MS Office applications (Word, Excel, etc.)., • Ability to interpret and develop technical reports., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. This job description is subject to change by the employer as the needs of the employer and requirements of the job change. J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The minimum pay rate for this position is $35.62. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. We maintain a drug-free workplace and perform pre-employment substance abuse testing.

Job Description About Us VIRSIG, LLC is a global technology company focused on secure networks, video surveillance, detection, and access control solutions. We protect people, places and data by identifying then addressing cybersecurity, infrastructure, perimeter, and site vulnerabilities. , At VIRSIG, our strength is in how we efficiently deliver leading-edge products and services to our customers, and we’re proud to set the standard for success in our industry. To help us continue growing, we’re seeking an experienced Technician to fill a key position at our Port Washington, NY Headquarters. This is an extremely technical position with extensive network, IT, cybersecurity and security systems expertise required to provide field service and maintenance to our clients. Why join us? • Competitive compensation packages, • Medical, dental, vision coverage, • Health reimbursement account, • 401(k) with company match, • Professional development assistance, • PTO program, • Paid federal holidays, • Growing firm with fantastic team and culture Job Details Responsibilities • Ensure that all daily activities are assessed and in line with VIRSIG’s “WHY”, • Lead by example and demonstrate VIRSIG Core Values while carrying out duties of the Operations Department, • Provide onsite technical support to design, build, install, configure, maintain, and operate an HPSD-12 FIPS 140-2 compliant ESS, • Lead the installation, configuration, maintenance, and repair of advanced security systems, including I.P. cameras, access control card readers, entry control locking hardware, intrusion detection sensors, system control software, and other integrated technologies, • Provide expert-level troubleshooting, diagnostics, and repair for complex system malfunctions, including installation of replacement hardware when necessary, • Demonstrate proficiency in following technical design drawings, electrical layouts, building plans, and blueprints, as well as installing, routing, and terminating cable to field devices and within control panels, • Ensure proper cable labeling and clean, professional cable management for installations, • Program, update, and manage security system software, including firmware updates and custom configurations, • Supervise and mentor junior technicians, providing technical guidance, training, and feedback, • Inspect and evaluate system installations and service calls to ensure compliance with project specifications, building codes, and customer requirements, • Oversee system testing and final quality checks to ensure technical and functional requirements are satisfied, • Document quality checks where required, for example signal loss or communications continuity for installed and terminated cables, • Collaborate with project managers, clients, and other stakeholders to ensure timely project completion and address technical challenges, • Lead large-scale, critical service, and installation projects and take ownership of the most technically challenging service calls, • Maintain customer satisfaction by providing detailed explanations, offering system demonstrations, and ensuring that clients fully understand the functionality of their system, • Ensure all work activities are properly and thoroughly documented, including troubleshooting steps, issue diagnosis, and recommended repair actions or hardware needed, as well as current status for any ongoing efforts, • Maintain awareness and compliance with approval process for work orders, facility access, equipment procurement, and service ticket signoff., • Escalate issues to the Project Manager or designated customer POC when appropriate Qualifications • 3 to 5 years of relevant work experience in the low voltage/CCTV/security industry with a focus on complex system integrations, • Minimum 1 year of supervisory experience preferred, • Must be able to meet and maintain various certifications, licenses and/or registrations, in accordance with applicable state laws and as required by the electronic security regulations in the state (s) worked, • Advanced certifications in security systems required (LenelS2 OnGuard and Milestone preferred), • Desired certifications: Genetec, Lenel, Honeywell, Hirsch, AMAG, CCNA Security, CCNA Routing & Switching, MCP, Microsoft, Cisco, CompTIA A+, CompTIA Network+, CSEIP, • Experience supporting commercial, DoD, and/or federal government IT infrastructure; IT infrastructure for Electronic Security Systems (ACS / IDS / VSS / Biometrics) is strongly preferred, • In-depth background in security technology and integration, • Capable of obtaining a United States Security Clearance, • Must be willing to participate in and pass the company’s pre-employment screening process including a background investigation and drug screening, • Expertise in reading and interpreting blueprints, wiring diagrams, and system schematics, • Advanced technical skills in troubleshooting, software configuration, and network security systems, • Strong leadership and project supervisory skills with the ability to oversee teams and coordinate multiple projects simultaneously, • Excellent customer service and communication skills with the ability to explain complex technical issues in an understandable way The position is primarily field-based with periodic visits to our Port Washington, NY headquarters. The colleague may perform some work- related travel. VIRSIG’s “Why” At VIRSIG, we believe that service to others can change the world. We believe that those who serve with strong morals and character can inspire others to do the same and overcome obstacles and challenges that many may see as insurmountable. We believe that it is our duty to defend, protect, and serve those that uphold our nation’s values. If you’re driven and looking for a place to grow, come join us. VIRSIG’s Core Values • People Matter, • Do the Right Thing, • Endless Pursuit of Excellence, • Long-term vs Short-term Focus, • Be Heroic!, • Never Give Up VIRSIG offers eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, professional development assistance, as well as participation in a 401(k) plan with company match. Salary will be commensurate with experience. VIRSIG is proud to be an equal employment workplace. Individuals seeking employment at VIRSIG are considered without regards to age, ancestry, color, gender (including pregnancy, childbirth, or related medical conditions), gender identity or expression, genetic information, marital status, medical condition, mental or physical disability, national origin, protected family care or medical leave status, race, religion (including beliefs and practices or the absence thereof), sexual orientation, military or veteran status, or any other characteristic protected by federal, state, or local laws. Powered by JazzHR OlX6p3PlUn

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must. What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1437B - White Plains, NY

Job DescriptionDescription: ESPEC North America (ENA) is partner in environmental and accelerated reliability test chambers and solutions with a long history and deep expertise in making the world a better place through better quality, higher reliability products. Mission We continually aim to grow and evolve by building mutually responsive, innovative partnerships with our customers, vendors, and strategic allies, and creating opportunities for our team members. Our cornerstone is to be the most reliable and accessible supplier of testing solutions. Due to growth, we are currently looking to add a new Field Service Technician to our team in the Hartford, CT / White Plains, NY area. We offer an awesome benefit package, company van, all needed tools, and all expenses paid for travel. Hours: Full-time 40+ a week. This position requires extensive travel. Essential Duties and Responsibilities • Provides on-site repairs, • Provides PMs/calibrations, • Service warranty work, • Installation of environmental test chamber, • Train customer on chamber operation, • Preform start-up services of the new chamber InstallationRequirements:, • Travel is required (all expenses paid), • Minimum of two years college or trade school or five years of experience in the industry., • Experience brazing/soldering/welding ferrous and non-ferrous materials, • Experience with plumbing, • Customer service experience., • Electrical controls troubleshooting, • Refrigerant charging and recovery, • Valid Drivers License, • Must be able to lift 50 lbs., • Basic computer skills, • EPA Certification

Job DescriptionSystems Integration Engineer Direct Hire Opportunity We are recruiting on behalf of our client, a leading manufacturing company, for a Systems Integration Engineer to join their Engineering team. This is a direct hire, full-time position offering excellent growth opportunities. Position OverviewThis engineering position offers an excellent entry point or advancement opportunity. The role involves exposure to various engineering tasks across all project phases, including field work. The successful candidate will work as part of the Test Equipment group and participate in diverse engineering projects while learning products, design concepts, company operations, and industry practices. This is a heavy field work role requiring travel and variable hours according to business needs - it is not a desk job and it is not 9am-5pm. Key Responsibilities • Resolve engineering issues in system integration and manufacturing aligned to project schedules, • Work with System Functions, Functional Interfaces, Electrical/Mechanical Interfaces, Asset Management, and Test Equipment, • Analyze and evaluate electrical schematics, mechanical drawings, pneumatic diagrams, test procedures, and technical documentation, • Plan solution paths and coordinate tasks with multidisciplinary engineering teams, • Generate and maintain asset management documents and official correspondence, • Track project progress and coordinate actions with suppliers and customers, • Participate in technical meetings, witness tests, and document meeting minutes with action items, • Support on-site testing activities, troubleshooting, and field modifications, • Provide engineering support to other departments across all project phases and manufacturing, • Coordinate technical activities with project management groups, • Lead technical discussions in design review meetings, • Provide elevated support for engineering headquarters by offering technical interpretations and faster response solutionsQualificationsEducation:, • Bachelor's degree in Electrical Engineering, Mechanical Engineering, or related engineering/science field, • Master's degree preferredExperience:, • Entry level (1-3 years) to mid-level (5-10 years) engineering experience, • Transportation industry or closely related field experience required, • Experience in system design, systems integration, or project engineering a plus, • Professional Engineer (PE) certification a plusRequired Skills & Competencies, • Practical knowledge in both electrical and mechanical engineering, • Strong problem-solving abilities for both technical and non-technical issues, • Excellent written and verbal communication skills, • Strong schedule management and task management capabilities, • Team player with collaborative mindset, • Commitment to multi-year projects, • Willingness to travel domestically and internationally for business, • Availability outside normal business hours when required, • Experience with federal regulations and official standards (AAR, APTA, IEEE, ASME, EN, MIL, etc.) Employment Details, • Position Type: Direct Hire, Full-time, • Salary: $85,000-95,000 (DOE), • Classification: Exempt, • Department: Engineering, • Reports To: Engineering Manager, • Travel: Required for domestic and international business travel

Job Description BASIC FUNCTIONS Lead and direct the Quality Engineering Team, ensuring that products meet design and reliability requirements. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Offer technical support as required throughout the organization., • Oversight of the Designated Quality Representative (DQR) program for Sikorsky, Lockheed, GDLS and UTC., • Ensure AS9102 and customer requirements are met for all First Article Inspections conducted at CTG, • Technical blueprint, specification and datasheet interpretation and support for all departments, • Provide support for customer defined contract review on any technical requirements established by the customer., • Product planning for all new product(s) – Sampling plans, Inspection/Test methods, validation/verification points., • Product failure review (Internal and External) and providing solutions for added testing/inspection., • Product failure review (Escapes - RMA) from customer. Communication with Sales Department and Customer on resolutions. Process Return Material Authorizations accordingly., • Product Failure review (Internal – RTV), identify any potential Suspect Counterfeit, Confirmed Counterfeit or Unapproved parts that require disposition. Coordinate with the Quality Compliance Manager per AS5553 on disposition methods., • Supporting the Electronic Review Board (EEE Device review – Blueprint, specification requirements and providing authentication solutions), • Monitoring and Measurement Equipment calibration and preventative maintenance. Creating effective cycles to ensure longevity of equipment., • Coordinate with Quality Compliance Manager to establish new standards (ISO, AS or otherwise) to implement within Quality Management System., • Ensure technical standards (ESD S20.20, ISO17025, AS6171, IDEA-STD-1010, etc.) meet industry requirements and are established within the organization in the form of written, documented processes., • This individual has the authority to disposition product(s) as necessary., • Ensures compliance with company code of conduct and all applicable laws, regulations, rules, and policies., • Perform other duties as necessary STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • OTD for special processes FAI, Test Plans, DARs, • Quality ratings for special processes (RMAs, nonconformances, rework) EDUCATION / EXPERIENCE / COMPETENCY • Excellent verbal and written communication skills., • Excellent interpersonal and customer service skills., • Excellent organizational skills and attention to detail., • Excellent time management skills with a proven ability to meet deadlines., • Strong analytical and problem-solving skills., • Strong supervisory and leadership skills., • Ability to prioritize tasks and to delegate them when appropriate., • Proficient with Microsoft Office Suite or related software., • Bachelor’s degree in related field required., • At least three years of related experience required.

Job Description BASIC FUNCTIONS Mid-level position. Performs counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to operate all test equipment within the Laboratory Department, • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Compile, review data and complete test reports IAW CTG Standards, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections., • Comply with all requirements of the AS9120, ISO 9001, ASA-100, and IDEA QMS 9090 Quality Management System and criteria of CCAP-101, AS6081, AC7402 and ANSI/ESD-S20.20 STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent with a minimum of 2 years’ experience performing in-process and final inspection preferably in a machining, automotive or aerospace business, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Ability to correctly use and interpret basic measuring tools including weight gauge, micrometer, caliper scale (linear), gauge blocks, thread gauges, and comparative standards Basic proficiency of Microsoft Excel and Word, • Independent; can work with limited supervision and direction, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • ASQ CQI certified or must completed certification within 1 year of accepting position, • Strong Electronics inspection knowledge preferred, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES • Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility, • Ability to complete a full analysis on all EEE Devices within the Laboratory, • Ability to learn and subsequently operate all test equipment within the Laboratory Department, • Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested., • Identify nonconformity to provide data to Quality Manager., • Ability to communicate, document and report all nonconformity within internal system and direct supervisor., • Ability to conduct work as assigned by senior management., • Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day., • Ability to understand industry traceability and documentation requirement as required for each industry, • Ability to evaluate and differentiate between various commodity types., • Review and implement detailed inspection reports to provide all information regarding product testing and inspection, • Ability to use general inspection gages, Ex. Calipers, Micrometers, etc., • Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements., • Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity., • Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements., • For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports., • Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Daily throughput (inspections/Lab steps completed), • Quality Issue detections (Incoming NCM ), • Outgoing Quality (customer Escapes), • IDEA Certification and knowledge implementation, • Use of GD&T and FAI knowledge for timely FAIR completion, • Issue communication, • Daily 6S/ESD/FOD policies followed, • Ability to find datasheets/drawings information on CTG Systems, • Diversity of inspections (EC/EM/HA/Hardware/etc), • Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY • High School Diploma or equivalent, • 1 year of manufacturing or quality experience is a plus but not required, • Must be proficient in English, both written and verbal communication skills, • Good arithmetic skills are required, • Mechanical aptitude desired, • Working knowledge of measurement instruments: i.e., calipers, etc., • Basic proficiency of Microsoft Excel and Word, • Must complete IDEA-ICE-3000 Certification within 6 months of hire., • Able to pass internal testing and training to meet internal requirements, • Must demonstrate acceptable vision requirement.

Job Description BASIC FUNCTIONS The Accounting Administrator is responsible for supporting the financial operations of the organization by performing a variety of accounting and administrative tasks. This role ensures the accuracy, timeliness, and organization of financial records while assisting in the day-to-day accounting functions. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES Accounts Receivable • Send Customers Monthly Billing Statements., • Update Customer Profiles to ensure billing information is up to date and all communication with customers are noted on accounts., • Prepare and send out Customer invoices as needed., • Assist in researching misapplied payments, overpayments, deductions/credits and work with Finance staff to reconcile accounts., • Assist Compliance and Sales Department with completing Customer Surveys., • Assist Finance Department in assessing Credit worthiness of existing or prospective clients following CTG’s credit policy., • Assist and act as backup for extending credit to customers., • Manage freight charges for all carriers (FEDEX, UPS, & DHL) download reports and reconcile carrier shipment type to internal shipment report; dispute any issues with carrier weekly., • Manage Month End Credit Card Reconciliation., • Assist with updating banking details on Vendor profile., • Process Vendor invoices received via AP Mailbox and USPS., • Establish and maintain relationships with new and existing Vendors., • Process payment methods such as Checks (including CODs), Wires, and ACHs. This includes prepayments made to vendors., • Review and post “On-Hold” invoice vouchers daily to ensure payables are current., • Perform accurate data entry into computer software programs., • Support Finance Team on various accounting tasks including ad-hoc analyses., • Ensure compliance with company code of conduct and all applicable laws, regulations, rules, and policies. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Pending EDUCATION / EXPERIENCE / COMPENTENCY • A minimum 1-3 years of accounting/ finance experience, required., • Bachelor’s degree in accounting from an accredited university, required., • Advanced Skills in Microsoft Office Applications (PowerPoint and Excel), required., • Excellent verbal and written communication skills., • Knowledge of GAAP and basic accounting principles., • Strong attention to detail with a dedication to accuracy., • High degree of familiarity with accounts receivable functions., • Excellent Analytical Skills and ability to analyze large sets of data.