Electrical testing jobs in Hoboken, New JerseyCreate job alerts

Key Responsibilities: Climb towers (up to 500 ft or more) to install, inspect, and maintain wireless equipment. Install and secure antennas, coaxial cables, fiber lines, connectors, mounts, and grounding systems. Perform sweep and PIM testing (if trained) and basic troubleshooting of equipment. Assist with tower structural modifications, antenna alignment, and weatherproofing. Load/unload materials and rig equipment for tower lifts. Use hand tools, power tools, and test equipment safely and effectively. Follow detailed construction drawings, scopes of work, and RF design plans. Ensure all work is performed safely, with high quality and attention to detail. Maintain accurate daily field reports, timesheets, and photo documentation. Assist with on-the-ground civil or electrical tasks when not climbing. Participate in job site safety briefings and follow all OSHA and company safety standards. Requirements: Education & Experience: High school diploma or GED (required). 1 3 years of experience as a Tower Technician or equivalent climbing experience. Proven tower climbing experience (required). Experience with LTE, 5G, small cell, DAS, or microwave systems is a plus. Skills & Competencies: Ability to climb and work at heights for extended periods. Knowledge of tower rigging, safety procedures, and fall protection. Familiarity with installation and testing tools (Anritsu, Site Master, fiber testers, etc.). Strong teamwork, communication, and problem-solving skills. Ability to read and interpret construction documents and RF plans. Certifications (Required or Preferred): ComTrain or equivalent tower climbing certification (required). OSHA 10 or 30 Construction Certification. RF Awareness Certification. First Aid/CPR. Competent Rigger and Rescue Training (preferred). Valid driver's license with clean driving record (CDL is a plus). Working Conditions: Must be able to climb towers 100 500+ feet frequently. Outdoor work in all weather conditions. Extended travel and overnight stays often required. Must be able to lift 50 75 lbs, bend, reach, and work in physically demanding conditions. May require hearing protection.

Job DescriptionBenefits: • 401(k), • Company car We are proud to partner with a family-owned, industry-leading commercial boiler services company that has been serving clients for over 80 years. Their longevity and success stem from a commitment to customer care and consistently delivering the highest level of boiler service. The company specializes in boiler repair, cleaning, inspection, water treatment, welding, fabrication, and a full range of related services for all types of commercial boilers. Due to continued growth, they are seeking a skilled Commercial Gas/Oil Burner Service Mechanicto join their team. Immediate Opening Apply Today! Benefits: • Health Insurance, • 401k, • Pension, • Health insurance, • Company service vehicle (Dispatched From Home!), • Paid vacation, sick leave, and holidays, • Company-provided tools, • Ongoing technical training and certification supportKey Responsibilities:, • Service and repair high-capacity commercial and industrial Gas/Oil burners, and heating systems., • Conduct combustion analysis and make necessary adjustments to ensure system efficiency and compliance with emissions standards., • Troubleshoot electrical and mechanical faults in burner and boiler systems., • Perform preventative maintenance and inspections on commercial Gas/Oil heating systems., • Replace and calibrate system components such as fuel pumps, nozzles, motors, ignition transformers, and control panels., • Document all work performed and parts used; complete service and maintenance reports., • Ensure all work is compliant with local, state, and federal codes and regulations., • Assist in commissioning newly installed commercial burner systems., • Respond to emergency service calls on a rotating basis.Qualifications:, • 3+ years of experience in servicing commercial Gas/Oil burner systems, • Knowledge of Building Automation Systems (BAS) and integration with burner controls., • Familiarity with emissions testing protocols and reporting., • Valid Gas/Oil burner technician license or certification (as required by state/local authorities)., • Strong understanding of combustion theory, burner controls, and boiler operation., • Experience working with large mechanical systems, including hydronic and steam boilers., • Ability to read and interpret schematics, technical manuals, and blueprints., • OSHA 30 certification, • High school diploma or equivalent; completion of a trade school or apprenticeship preferredReady to take the next step in your Boiler Services career?

Job Description This position is responsible for assisting in the operation of department. An individual in this position will be expected to perform additional job-related responsibilities and duties throughout the facility as assigned and or as necessary. In addition to the responsibilities below, the Systems Specialist I performs routine technical duties in troubleshooting and repairing of components within building automation field cabinets, sensors, and related controls. They typically work under the direct supervision of a higher-level building automation technician but may be asked to perform tasks at the capacity of a BMS Systems Specialist II. Requirements Essential Functions: An individual must be able to successfully perform the essential functions of this position with or without a reasonable accommodation. • Troubleshoot and make necessary repairs to building-automation-system field cabinets, including communication devices, printed circuit boards, power supplies, electrical/electronic controls, sensors, and transducers., • Take initiative and responsibility safely performing the point-to-point checkout of end devices, e.g., use multimeter to check continuity and/or resistance of sensors, verifying sensors with calibrated meters, breaking connection at end devices to verify IO channel assignments, verifying valve stroke and fail positions, etc., • Download modules and assist in bringing networks online., • Communicate technical issues to senior level technicians., • Maintain field markups and perform warranty related service calls., • Assist with maintaining regular system backups during project., • Assist more senior level technicians in the startup of systems and equipment., • Able to document, demonstrate and exercise non-complex systems for third party commissioning support and testing., • Provide project demonstration and training as required for customers., • Report to work on time and ready to perform assigned tasks., • Maintain company tools, test equipment, and material., • Create thorough daily reports, per project or daily duty, and submit to Albireo project team and Operations Supervisor., • Stay busy and look for opportunities to advance project completion., • Communicate with jobsite personnel from other trades to complete project objectives., • Be comfortable in using/navigating the company’s building automation suite and offerings., • Identify issues and make minor program and graphic changes., • Support a culture based on open/honest dialogue and involvement with all team members that demonstrates the value of their input and engagement in improving performance., • Equivalent experience, vocational school, or an Associate degree in electronics, mechanical systems, computer technology, air conditioning or similar field is preferred., • Experience in high-availability environments like data centers, hospitals, or government facilities., • Familiarity with the Automated Logic product line and software suite is a preferred but not required., • Self-starter attitude that is inquisitive, intuitive and has a willingness to learn and grow., • Ability to document daily tasks, plan and prepare for tasks assigned., • Strong problem-solving skills, critical thinking, and self-initiative., • Excellent written and verbal communication, interpersonal skills; high quality document and report preparation. Compensation Range: $34-$37 Hourly DOE Benefits Medical Insurance Dental Insurance Vision Insurance Basic Life Insurance Voluntary Life Insurance Short Term & Long Term Disability Paid Vacation Paid Sick Time Paid Holidays 401K with Company match

Job DescriptionPosition Overview The HVAC Service Technician is responsible for diagnosing, repairing, and maintaining commercial HVAC and mechanical systems across a variety of project types, including tenant improvements, renovations, and service contracts. This role requires a hands-on technician with strong troubleshooting skills who can deliver high-quality service while working in fast-paced environments. The ideal candidate has experience servicing rooftop units (RTUs), split systems, refrigeration, and mechanical equipment, and is comfortable working independently while maintaining strong communication with clients and internal teams. Key Responsibilities • Troubleshoot, repair, and maintain HVAC systems including RTUs, split systems, heat pumps, and air handling units., • Perform preventive maintenance and inspections to ensure optimal system performance., • Diagnose issues related to electrical components, controls, compressors, motors, and refrigerant systems., • Service and repair refrigeration systems and related mechanical equipment., • Read and interpret wiring diagrams, schematics, and technical manuals., • Perform system startups, testing, and commissioning as needed., • Maintain accurate service records, including work performed, parts used, and recommendations., • Communicate with customers to explain issues, solutions, and recommended repairs., • Ensure all work complies with safety standards, codes, and company procedures., • Coordinate with dispatch, project teams, and management to complete service calls efficiently., • Maintain a clean and organized service vehicle, tools, and jobsite.Qualifications, • 3+ years of experience as an HVAC Service Technician, preferably in commercial environments., • Strong knowledge of HVAC systems, refrigeration cycles, and mechanical equipment., • Experience troubleshooting electrical systems, controls, and HVAC components., • Ability to read and interpret schematics, wiring diagrams, and equipment manuals., • EPA Certification required (Universal preferred)., • Strong problem-solving and diagnostic skills., • Excellent communication and customer service skills., • Valid driver’s license with a clean driving record.Preferred Qualifications, • Experience working on commercial tenant improvement or service-based environments., • Familiarity with building automation systems (BAS) and controls., • Experience with preventive maintenance programs and service contracts., • OSHA certification or equivalent safety training.

Job Description Veris Residential, Inc. is a forward-thinking real estate investment trust (REIT) that primarily owns, operates, acquires and develops premier Class A multifamily properties in the Northeast. Our technology-enabled, vertically integrated operating platform delivers a contemporary living experience aligned with residents’ preferences while positively impacting the communities we serve. We are guided by an experienced management team and Board of Directors, underpinned by leading corporate governance principles; a best-in-class approach to operations; and an inclusive culture based on meritocratic empowerment. We have an immediate need for a well-organized, enthusiastic individual to join our prestigious, award winning property management team as a Maintenance Technician II at one of our luxury apartment communities Haus 25, Jersey City, NJ. Skills: Must be able to diagnose problems with and repair the following: • major appliances, • HVAC, • basic - intermediate plumbing (when no license required), • basic - intermediate electrical (when no license required), • sheetrock, • general carpentry, • pool care (if required by property), • gutters, • wallpaper/painting Other skills included, but not limited to: • ability to deal well with people and get them to feel comfortable quickly, • basic computer skills, specifically knowledge of Microsoft Office products, • good verbal and written communication skills, • strong customer service orientation, • must have the ability to arrive at the site within 30 minutes if not living on site Requirements: • High School Diploma or equivalent or 2 years of experience in the field., • EPA certifications for refrigerant recycling and at a minimum, Type I & II certifications (Please note: Veris will pay for the EPA testing materials and test if completed and passed within 5 months of being hired), • Valid Driver’s License and insurance, • Black Seal – if required by property, • CPO – Certified Pool Operator Certification – if required by property, • Other licenses and certifications as required by state or local laws Compensation: $54,080 Veris Residential, Inc. has a proven record of success along with competitive compensation and an excellent benefits package which includes medical, dental, vision, FSA/DDC, company paid life insurance, supplemental insurance programs and 401(k). Great Place to Work Certified Jan 2025 – Jan 2026 Put your career on our fast track to success by contacting us now! For more information, please visit the careers page on . Veris Residential is an equal opportunity/affirmative action employer. Veris Residential does not discriminate against applicants on the basis of race, creed, nationality, sex, color, religion, national origin, ancestry, age, genetic information, mental or physical disability, marital status, familial status, domestic partnership status, civil union status, affectional or sexual orientation, gender identity or expression, atypical cellular or blood trait, military status or any other category protected by federal, state or other law applicable in the location of employment Veris Residential is an equal opportunity/affirmative action employer. Veris Residential does not discriminate against applicants on the basis of race, creed, nationality, sex, color, religion, national origin, ancestry, age, genetic information, mental or physical disability, marital status, familial status, domestic partnership status, civil union status, affectional or sexual orientation, gender identity or expression, atypical cellular or blood trait, military status or any other category protected by federal, state or other law applicable in the location of employment.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$40.11—$51.32 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$40.11—$51.32 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job Description Job Summary Lead Maintenance Technician- Superintendent acts as team leader for an assigned work group of various skilled trade technicians including mechanical, plumbing, electrical, millwright, and general maintenance, and other assignments; performs work within scope of authority and provides technical leadership and oversight. Implements quality control and safety plans to ensure compliance with contract specifications and applicable regulations. Primary Job Duties • Coordinates and facilitates all phases of the maintenance work effort., • Performs assigned preventive maintenance (PM) and unscheduled maintenance within the facilities covered under the contract., • Assign and tracks work that is assigned to each technician in the assigned work group, including tracking daily workload and productivity., • Reviews work schedules and ensures proper schedule coverage for planned work, including outage support and escorting requirements., • Mentors technicians in compliance programs., • Supports Management in preparing and submitting status updates for individual repairs and significant preventive maintenance efforts., • Supports the Quality Control Manager in ensuring employees are documenting results of all work orders and PMs, meeting Facility managers’ requirements of proper documentation., • Performs other duties as assigned. Knowledge, Experience and Skill Requirements • Must be experienced in a trade, with at least eight years' experience in commercial / industrial / government facilities O&M work and/or three years’ experience in quality control program management., • Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions., • Ability to inspect, evaluate, and report on all phases of operations and maintenance of HVAC, Electrical, Steam, Roofing, Carpentry, Interior and Exterior Finishes, Pest Management, Elevators, Fire detection and suppression, and Plumbing sufficient to assist and motivate performance of multiple trades., • Working knowledge of standard NYU Langone Hospital facility requirements, equipment, utilities, and proper coordination and testing procedures., • Knowledgeable about job site safety plans, systems, and procedures., • Working knowledge of the contract scope and contract communications requirements., • Demonstrated ability to develop and improve communication and integration of work efforts with local government technician staff., • Demonstrated ability to coach, mentor and train fellow technicians, including those outside his own trade., • Must have the ability to work alone or with minimal supervision and be able to deal with others in a diplomatic or positive manner., • Working knowledge of standard Microsoft programs., • Driver's license Disclaimer J&J Worldwide Services CBRE Government and Defense Business is thrilled at the opportunity for you to apply to one of our roles. The pay rate for this position is $52.00 - $57.00. This position may also be eligible for a wide range of competitive benefits that can include but not limited to: medical, well-being, financial planning and short-term incentives benefits. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. Requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN J&J WORLDWIDE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE’S AT WILL EMPLOYMENT RELATIONSHIP WITH J&J WORLDWIDE SERVICES.

Job Description Now Hiring: Facilities Technician - New Britain, CT Pay: $17.00 per hour | Full-Time | Approximately 40 Hours per Week At First Student, safety and reliability are at the core of everything we do. Our Facilities Technicians play a key role in maintaining a safe, functional, and compliant environment for our employees and operations. This position is responsible for general facility upkeep, preventative maintenance, and supporting operational efficiency across the location. This position requires maintaining equipment and facilities in compliance with all applicable regulations and company preventive maintenance programs. Why Join First Student? At First Student, we are proud to offer: * Starting Pay: $17.00 per hour * Full-time schedule - approximately 40 hours per week (hours may vary based on operational needs) * Comprehensive medical, dental, and vision health benefits * 401(k) with company match * Paid holidays and vacation * Employee discount programs through Perk Spot * Ongoing training and development opportunities * Tremendous career advancement opportunities due to our strong presence across North America * Positive and rewarding work environment Facilities Technician Responsibilities * Inspect and repair facility components and systems under general supervision * Troubleshoot and repair electrical, plumbing, mechanical, and facility systems * Perform preventive maintenance and equipment inspections * Complete minor mechanical repairs and assist with installation of new systems or components * Maintain facility cleanliness including offices, restrooms, and common areas * Support yard and outdoor maintenance as needed * Ensure proper handling and disposal of non-hazardous and hazardous materials * Maintain equipment in compliance with all federal, state, and local regulations * Identify and report safety hazards, ensuring a safe working environment * Assist with general facility upkeep tasks as assigned by management Qualifications * High school diploma or equivalent required * 1-2 years of maintenance or facilities experience preferred * Broad knowledge of maintenance disciplines including electrical, plumbing, and mechanical systems * Ability to operate tools and equipment safely and effectively * Strong attention to detail and ability to work independently * Good communication and teamwork skills * Electrician or welding experience/licensing is a plus Physical Requirements & Working Conditions * Ability to work both indoors and outdoors as required * Ability to lift, carry, and move equipment or materials as needed * Must be able to perform physical tasks associated with maintenance and repair work At First Student, our commitment to safety, dependability, and customer care creates an environment where you can thrive. With more than 120,000 employees across North America, we offer stability, growth, and exceptional training. Apply today to join our team! We aspire to have a culture where all people are First. We strive to attract and retain a diverse workforce; therefore, all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. First is also committed to providing a drug-free workplace. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description Essential Job Duties and Responsibilities: • Performance of emergency and routine maintenance within residential, commercial and public spaces., • Diagnose maintenance problems, and correct defects using blueprints, manuals, catalogs, etc., • Plumbing installation, maintenance and repair of building fixtures, including lines up to 2-1/2” diameter., • Installation and troubleshooting, including repair of electronic and electrical fixtures up to 110 volts., • Fabrication, repair and installation of cabinets, shelving, and interior doors, • HVAC repairs, including clearing of condensation lines, blower fan and motor replacement, • Preventative maintenance of various mechanical equipment and fixtures., • Records work performed, materials used and jobs in progress on work orders, • Measures building materials and spaces for installation accurately., • Maintain detailed log of vehicle activities and conditions, reporting any issues to supervisor, • Ensure a clean and safe environment in all spaces during and after work completed Educational Requirements: • Knowledge of OSHA and safety requirements related to performing maintenance repairs, • Proficiency with industry hand and power tools., • Working knowledge of materials and method in field, • Previous experience in maintenance of high-rise buildings, houses or other structures., • Effective written/oral communication and good interpersonal skills., • Must be proactive and resourceful; skilled at working independently and taking ownership over tasks and responsibilities., • Must be able to work overtime as well as varying schedules based on the needs of the department., • Bi-Lingual is a plus, • Persons performing service in this position classification may routinely exert up to 80 pounds of force to lift, carry, push, pull, or otherwise move objects., • This type of work will involve regular walking or standing for extended periods of time., • It may involve stooping or bending., • Handling and working with various materials and objects are important aspects of this job. Reasonable accommodations may be made to enable a person to perform the essential functions of the job. Riverbay Corporation is an Equal Opportunity Employer.

Job Description Position Summary The Building Maintenance Technician is a role that is tasked with supporting our Retail, Warehouse, Caves & Commissary teams with all property engineering and maintenance requests. This role will be a hands-on team member who maintains property appearance, equipment, HVAC, plumbing, refrigeration, and electrical systems that lead to a better customer experience. This includes physical plant and fixtures to provide maximum profitability and operational efficiency. He/She/They perform diverse, hands-on tasks including minor plumbing, electrical repairs, HVAC maintenance, painting, and carpentry. This role conducts preventative maintenance, responds to repair requests, manages outside vendors when needed, and manages tools to keep buildings running smoothly. He/She/They are responsible for maintaining basic systems operation, facility cleanliness, and completing repairs to other building components that influence customer service. Who You Are • Operations Focused: You always look for ways to control expenses while getting the work done. You have the know-how to get things done efficiently and effectively., • Hospitality Driven: Driven by a desire to create a space where customers want to return, you focus on how NYC customer-facing operations can create a warm and inviting environment that leads to crafting a remarkable experience., • Problem Solver: You’re not afraid to dive right in and attack a problem head-on. You use creative thinking to design strategies and are always prepared with potential solutions., • Timely: You are always timely and well-prepared in your actions and responses. You know what it takes to get the job done and always deliver and communicate results or decisions in an effective way., • Agile and action-oriented: You thrive on detail and are keen to notice changes in facilities operations; what works/what doesn’t. You are open to new ideas that drive you to perform at their best. What You Do • General & Preventative Maintenance:, • Inspecting and servicing machinery, HVAC systems, plumbing, and electrical systems to prevent failures., • Fixing broken items, such as repairing drywall, replacing light fixtures, repairing leaks, and fixing doors/locks., • Painting, cleaning, and repairing walls, floors, and surfaces., • Ensuring fire alarms, smoke detectors, and carbon monoxide detectors are operational, and maintaining compliance with safety regulations., • Responding with urgency to repair requests from location managers or their team members., • Maintains and cleans building equipment, including HVAC systems, plumbing fixtures, and electrical outlets., • Facility Upkeep:, • Keeps common areas, restrooms, and other public spaces clean and tidy., • Ensures cardboard and other rubbish is removed from warehouse floor., • Performs routine cleaning tasks, such as dusting, sweeping, mopping, and vacuuming., • Ensures that building systems are operating efficiently and safely., • Responsible for basic snow and ice removal during winter months., • Inventory and Supplies:, • Manages and maintains inventory of cleaning supplies, tools, and equipment., • Orders and restocks supplies as needed., • Keeps work areas organized and clean., • Other Duties:, • Required to work on-call or during off-hours for emergency maintenance requests, • Responsible for maintaining records of maintenance activities and repairs, • Must be able to operate and maintain a variety of hand and power tools, • Required to wear appropriate safety gear and follow safety procedures, • Other duties as assigned What We Need From You • 2+years in a mix of retail and hospitality management with an emphasis on commercial space maintenance, • Effective communication (listening, verbal, and written) skills and ability to work well with all levels of management, team members & external contractors/partners, • Basic construction skills such as carpentry, painting, masonry, & plumbing, • Skilled in using hand and power tools (e.g., drills, saws, wrenches), • Ability to diagnose & fix basic mechanical or electrical issues. Knows when to call external vendor for assistance/resolution, • Administrative skills for ordering supplies, handling records and scheduling maintenance, • Physical strength and dexterity to lift, move and handle equipment, • Stamina to deal with long hours standing or walking, • Ability to work in extreme hot or cold conditions, • Ability to multi-task in a fast-paced environment, paying close attention to detail & accuracy, • Flexible schedule with the ability to work nights, weekends, and holidays, • Extensive knowledge and experience with food safety compliance including NYS Department of Agriculture regulations, • College degree or equivalent education or training Work Perks: • Weekly pay, • 2 weeks’ vacation and sick time, • Comprehensive medical, dental, and vision benefits, • 401k with Company Match, • Life Insurance and LTD options, • Paid parental leave, • Annual bonus and referral program, • Pre-tax commuter benefits, • Discounts on our products, classes, and restaurant, • And more! About Us: Murray's Cheese was born in Greenwich Village in 1962, and the heart of our business still resides in New York City with many ways to experience Murray’s locally. At the counter, our cheese experts and mongers serve thousands of neighborhood regulars, commuters, and tourists every year at our two locations—the Bleecker Street flagship retail experience, which also includes our mac & cheese counter, and our shop in Grand Central Market. For those eager to learn more, we offer robust education and events programming and, for those looking to serve more, we provide catering of expertly crafted cheese boards and freshly made dishes. Oh, did we mention we also age our own cheese? Yeah, we do that too. We have state-of-the-art cheese caves in Long Island City. Because we like to share, we wanted to bring our exceptional cheese to people outside of New York too. So, we made Murray’s products available online at murrayscheese.com and in-store with a curated selection of specialty cheese in more than a thousand Kroger and Kroger-owned stores nationwide (and, growing every day!). And, through our wholesale business, you might enjoy Murray’s cheese at more than 600 restaurants across the country. Murray’s Cheese provides equal employment opportunities to all employees/applicants and prohibits discrimination and harassment of any type on the basis of race, gender, gender-identity/expression and transgender status, color, national origin, ethnicity, religion, creed, age, physical or mental disability (including gender dysphoria and being a certified medical marijuana patient), sexual orientation, marital, partnership, parental or familial status, citizenship status, pregnancy, childbirth, lactation or related medical conditions, military/veteran status, genetic information or testing (including predisposing genetic characteristics), domestic violence victim status, sexual abuse victim status, stalking victim status, caregiver status, unemployment status, consumer credit history, arrest or conviction record, or the perception that an employee has one of the above characteristics or any other consideration protected by federal, state or local laws. If contacted for an employment opportunity, please notify our HR team if you need accommodation. E-Verify Notice: • This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Please see the attached notice for more information., • Este empleador participa en E-Verify y proporcionará al gobierno federal la información de su Formulario I-9 para confirmar que usted está autorizado para trabajar en los EE.UU.. Por favor, consulte el aviso adjunto para obtener más información., • Attachment: E-Verify_Participation_Poster_Eng_Es.pdf

New York City, NY – MEP Project Manager Salary: $120,000 - $165,000 We are partnering with a leading construction consultancy to appoint an experienced MEP Project Manager in New York City. This role will focus on the delivery of complex building systems across a diverse portfolio of commercial, mixed-use, and institutional projects. This is an excellent opportunity for a technically strong professional to take ownership of mechanical, electrical, and plumbing systems from design coordination through construction and commissioning. Position Overview The MEP Project Manager will be responsible for overseeing all aspects of MEP delivery, ensuring systems are designed, coordinated, and installed in line with project requirements, budget, and schedule. Acting as a key liaison between clients, design teams, and contractors, you will play a critical role in ensuring technical alignment, constructability, and successful integration of building systems throughout the project lifecycle. Key Responsibilities • Manage MEP scope from design development through construction and commissioning, • Coordinate with architects, engineers, consultants, and contractors on all MEP-related matters, • Review design documents, specifications, and drawings for completeness and constructability, • Monitor project budgets, schedules, and performance related to MEP systems, • Oversee procurement, subcontractor coordination, and installation activities, • Manage RFIs, submittals, and change orders related to MEP packages, • Conduct site visits to monitor progress, quality, and compliance, • Support testing, commissioning, and handover processes, • Identify risks and provide solutions to maintain project objectives Ideal Candidate Profile We are seeking a well-rounded MEP professional with strong technical expertise and the ability to manage complex building systems in a fast-paced environment. • Degree in Mechanical, Electrical, or Building Services Engineering (or related field), • Proven experience managing MEP scopes on commercial or large-scale construction projects, • Strong understanding of HVAC, electrical distribution, plumbing, and building systems integration, • Experience working in a consultancy, contractor, or client-side environment, • Ability to read and interpret technical drawings and specifications, • Strong communication and stakeholder management skills, • Detail-oriented with strong problem-solving capabilities Compensation & Benefits • Competitive salary (dependent on experience), • Discretionary bonus, • 401(k), • Medical, dental, and vision insurance, • Generous PTO

Job Description Job descriptions Title: Automotive TechnicianJob Type: Full-time SummaryS & A Auto Repair LLC is seeking an experienced Automotive Technician. This person will be responsible for the maintenance and repair of the cars. The Auto Technician performs a full range of duties, including but not limited to the installation, repair, maintenance, and inspection of mechanical and electrical systems. JOB DUTIES • Performs related work as assigned, completing tasks in an efficient, timely, and professional manner, • Communicates with management and the mechanical team about any preventive issues or future potential complications observed, • Ability to work safely, adhering to the company policies, • Maintains the area of work clean, • Maintains, installs, services, parts such as Engines, Transmissions, Starters, air compressors, brakes, air conditioners, mufflers, Tune-ups, alternators, radiators, Differentials, Struts & shocks, ABS Systems, and other parts, • Replaces fuses, light bulbs, electric switches, circuit breakers, fans, and other electrical parts., • Experienced and knowledgeable in various hand and power tools and their applications. Ensures their proper use, care, and storage, • Work closely with other employees to motivate, train, and develop team skills JOB QUALIFICATIONS • Strong work ethic, ability to work and problem solve independently, • Driver's license (Required), • Knowledge of the accepted practices, processes, materials, and tools of maintenance trades., • Knowledge of the proper use of the scan tools, diagnostic tools, heater machines, lifts, A/C machines and any other equipment found in the facility., • Knowledge of the proper use of chemicals in the facility, • Must have the hand and power tools to properly perform the job required and have the ability to adhere to the updates in new cars., • Ability to do routine mechanical and electrical maintenance and care for tools and equipment, • The job duties require an employee to bend, reach, kneel, and stand for extended periods, • Must be bilingual, English and Spanish or English and Portuguese Experience: • 5 years of experience in mechanical auto repairs, testing/ diagnostics., • Professional experience in Engine, Transmission, Exhaust, Electrical maintenance, suspension and power, Brake system, Cooling System, Fluid, and Battery., • High school diploma

Job Description Fairstead is a purpose-driven real estate firm dedicated to building affordable communities across the country. Headquartered in New York, with offices in Colorado, Florida, and Washington DC, Fairstead owns and manages a portfolio of more than 27,000 apartments across 28 states. As an integrated owner, operator, and innovator, Fairstead brings development, construction, and property management under one unified platform to deliver high-quality affordable housing that serves our residents at scale. At Fairstead, we believe affordable housing should be thoughtfully designed, professionally managed, and responsibly operated. We seek to create and preserve housing that serves residents while delivering long-term value to communities, partners, and stakeholders. Fairstead challenges industry norms through our tech-forward, entrepreneurial approach to affordable housing. In addition to core real estate capabilities, we operate innovative service lines designed to improve resident outcomes, strengthen communities, and drive operational efficiency. We embrace digital transformation, data-driven decision-making, and emerging technologies, including AI, to build scalable systems that support sustainable growth, grounded in a culture of entrepreneurship, innovation, partnership, dedication, and integrity. ResiBridge is an independent Internet Service Provider of low-cost connectivity options that empower communities to stay connected. Our mission is simple: provide seamless internet access through professional-grade routers, free installation, and unparalleled service. Currently serving portions of Maryland, Ohio, Kentucky and the New York City metropolitan area including Newark, New Jersey, ResiBridge is rapidly expanding to other cities across the US. We design, build, and manage a cutting-edge hybrid network comprising fiber-optic technology and high-capacity wireless links, optimized for multi-dwelling units (MDUs). Leveraging innovative technologies traditionally reserved for commercial applications, ResiBridge delivers exceptional performance and bandwidth, ensuring a superior customer experience from initial onboarding to ongoing support. At ResiBridge, we value innovation, collaboration, and customer-first solutions. We strive to create an inclusive and supportive workplace where every team member can thrive and make a meaningful impact. ResiBridge is seeking a highly skilled and field-savvy Lead Network Deployment Technician to serve as a technical leader and mentor to our field deployment team. You will set the standard for build quality, speed, and professionalism, working side-by-side with technicians to ensure efficient installations, accurate documentation, and exceptional service delivery across our growing broadband footprint. Responsibilities: • Serve as the "gold standard" technician, modeling best practices and high-quality workmanship in the field, • Mentor and coach deployment technicians, training them on procedures, tools, and technical standards, • Perform advanced installation and troubleshooting tasks for fiber and wireless deployments, • Lead complex installations, retrofits, or service calls requiring high attention to detail, • Review and ensure as-builts, photos, and documentation are completed correctly in the field, • Assist with field QC, validating cable runs, terminations, equipment configuration, and signal testing, • Coordinate with the Network Deployment Manager to ensure proper materials, tools, and manpower are available, • Represent ResiBridge professionally with residents, building staff, and property managers Requirements: • Experience: A minimum of 3-5 years of fiber optic, Coax, Ethernet or similar cabling experience. This includes extensive hands-on experience with the installation, testing, and maintenance of Cat-5/5E/6/6A cables, fiber optics, fiber connectors, patch panels, and rack equipment., • Technical Proficiency: Demonstrated expertise in the installation of internet broadband infrastructure is essential. Candidates must be proficient in all aspects of network cabling and infrastructure setup., • Licensing: A valid driver license is required for this position, • Technical Documentation: Ability to accurately create, read, understand, and follow detailed work orders, blueprints, and scope documents., • Schedule Flexibility: Must be willing and able to adapt to a flexible working schedule, which may include evenings and weekends to meet project deadlines., • Tool Proficiency: Familiarity with a variety of hand and power tools is essential for efficient and safe completion of tasks., • Physical Requirements: Comfortable working in confined spaces such as basements, electrical closets, shaftways, etc. The position also requires the capability of lifting up to 75 lbs and working at heights (ladders/rooftops)., • Customer Service Skills: Excellent communication and customer service skills, with the ability to explain technical details to non-technical stakeholders. Nice-to-Haves: While not required, the following qualifications will be considered a significant plus: Salary Range$60,000—$75,000 USD Diversity in backgrounds and experiences is key to Fairstead's success. Being an equal opportunity employer is a central tenet of our philosophy that shapes who we are and the communities we serve. Our goal is to ensure competitive total compensation that is commensurate with experience, location, and other market benchmarks. For information about how we use your personal information, including information submitted for career opportunities, please review our Privacy Policy at

Job DescriptionDescriptionA great place to work and grow, Naik Group is a dynamic, multi-discipline engineering company with offices in New York and New Jersey. Our continued growth in this highly competitive market is evidence of the trust and value clients place in our services’ quality and timeliness. Included in the full range of professional services we offer are Bridge/ Structural Design & Inspection, Highway/Roadway Engineering, Civil/Site Engineering, Traffic Engineering/ITS, Utility Engineering, Construction Management & Inspection, Design Build, Survey, Right of Way, and High Definition 3-D Laser Scanning. Our principals take considerable pride in their approach to the firm’s management, offering services like that of a large organization while demonstrating the personal client and consultant relationship of a small firm. Naik Consulting Group is currently seeking a Junior Communication Engineer (EIT). The Junior Communications Engineer will support the planning, design, coordination, and implementation of communications and low-voltage systems for large-scale infrastructure and transportation projects. The ideal candidate has hands-on experience with fire alarm systems, network systems, and low-voltage communications, and is comfortable working in a multidisciplinary construction and engineering environment. This role will collaborate closely with design teams, construction managers, contractors, and public agency stakeholders to ensure systems are compliant, constructible, and successfully delivered. Responsibilities • Design, review, and coordinate fire alarm systems in accordance with applicable codes, standards, and authority having jurisdiction (AHJ) requirements, • Develop and review communications and low-voltage system designs, including structured cabling, fiber optics, CCTV, access control, PA/VMS, and network infrastructure, • Support infrastructure and transportation projects such as transit facilities, tunnels, stations, roadways, bridges, and related facilities, • Review contractor submittals, shop drawings, RFIs, and technical proposals, • Provide construction-phase support including site inspections, testing and commissioning support, and system acceptance, • Coordinate system interfaces with IT, electrical, and other building systems, • Ensure compliance with project specifications, industry standards, and safety requirements, • Participate in meetings with clients, agencies, designers, and contractors, • Assist with cost estimates, schedules, and risk assessments related to communications systems Qualifications • Bachelor’s degree in Electrical Engineering, Communications Engineering, or a related field (or equivalent experience), • 2+ years of experience in communications or low-voltage systems within construction, engineering, or infrastructure projects, • Engineer in Training (EIT) certification required, • Working knowledge of relevant codes and standards (e.g., NFPA, NEC, local AHJ requirements), • Experience supporting construction management or design-build projects, • Strong technical writing and communication skillsPreferred Qualifications, • Experience on transportation or infrastructure projects (transit, rail, roadway, aviation, or utilities), • Professional Engineer (PE) license preferred, • NICET certification (Fire Alarm or related disciplines), • Familiarity with public agency projects and compliance requirements, • Experience with system integration and testing/commissioning processes BenefitsNaik offers a competitive compensation package including: • Holiday and paid-time-off programs, • 401(k) Plan and Match, • Career Path Development Program (Management & Technical Career Tracks), • Tuition Reimbursement, • Competitive health and dental insurance premiums, • Short-Term Disability/Long-Term Disability, • Life insurance, • Employee Assistant Program (EAP), • Flexible Spending Account, • and MoreNaik is a Drug and Alcohol-Free workplace, an Equal Employment Opportunity employer and E-Verify employer. We are committed to pay transparency and fairness in hiring. This posting complies with the Pay and Benefit Transparency Laws, which requires employers to disclose compensation and benefits information in all job advertisements.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Veris Residential, Inc. is a forward-thinking real estate investment trust (REIT) that primarily owns, operates, acquires and develops premier Class A multifamily properties in the Northeast. Our technology-enabled, vertically integrated operating platform delivers a contemporary living experience aligned with residents' preferences while positively impacting the communities we serve. We are guided by an experienced management team and Board of Directors, underpinned by leading corporate governance principles; a best-in-class approach to operations; and an inclusive culture based on meritocratic empowerment. We have an immediate need for a well-organized, enthusiastic individual to join our prestigious, award winning property management team as a Maintenance Technician II at one of our luxury apartment community BLVD 475, Jersey City, NJ. Skills: Must be able to diagnose problems with and repair the following: • major appliances, • HVAC, • basic - intermediate plumbing (when no license required), • basic - intermediate electrical (when no license required), • sheetrock, • general carpentry, • pool care (if required by property), • gutters, • wallpaper/painting Other skills included, but not limited to: • ability to deal well with people and get them to feel comfortable quickly, • basic computer skills, specifically knowledge of Microsoft Office products, • good verbal and written communication skills, • strong customer service orientation, • must have the ability to arrive at the site within 30 minutes if not living on site Requirements: • High School Diploma or equivalent or 2 years of experience in the field., • EPA certifications for refrigerant recycling and at a minimum, Type I & II certifications (Please note: Veris will pay for the EPA testing materials and test if completed and passed within 5 months of being hired), • Valid Driver's License and insurance, • Black Seal - if required by property, • CPO - Certified Pool Operator Certification - if required by property, • Other licenses and certifications as required by state or local laws Compensation: $54,080 Veris Residential, Inc. has a proven record of success along with competitive compensation and an excellent benefits package which includes medical, dental, vision, FSA/DDC, company paid life insurance, supplemental insurance programs and 401(k). Great Place to Work Certified Jan 2025 - Jan 2026 Put your career on our fast track to success by contacting us now! For more information, please visit the careers page on ___. Veris Residential is an equal opportunity/affirmative action employer. Veris Residential does not discriminate against applicants on the basis of race, creed, nationality, sex, color, religion, national origin, ancestry, age, genetic information, mental or physical disability, marital status, familial status, domestic partnership status, civil union status, affectional or sexual orientation, gender identity or expression, atypical cellular or blood trait, military status or any other category protected by federal, state or other law applicable in the location of employment Veris Residential is an equal opportunity/affirmative action employer. Veris Residential does not discriminate against applicants on the basis of race, creed, nationality, sex, color, religion, national origin, ancestry, age, genetic information, mental or physical disability, marital status, familial status, domestic partnership status, civil union status, affectional or sexual orientation, gender identity or expression, atypical cellular or blood trait, military status or any other category protected by federal, state or other law applicable in the location of employment.

Durst Image Technology US has been an industry leader in Digital Imaging for over 80 years. Established in 1936, Durst is a fast-growing company based in Rochester, NY that sells and services large format, label, and corrugated ink jet printers in North America. Our customers are commercial service providers and industrial enterprises, with products requiring a printed surface design. At Durst, you frequently hear "This is the best job I've ever had!" from HQ and field employees alike. We are a financially strong, growing company with products and technology that are on the cutting edge of the digital printing market. Our core, 6-month FSE training program is thorough and includes weeks at our Rochester, NY HQ and in the field shadowing other FSEs. You get to form strong relationships with customers and delight them with outstanding service. You'll have the satisfaction of knowing you made a positive, lasting impact every day. And, you can rest assured that Durst has your back. You can ask literally anyone in the company for help with anything and they are more than happy to assist. Leaders are respected because they walk the walk. Durst prides itself on continued personal and professional development and treating employees like family. Are you the go-to for fix-it assistance in your circle of family and friends? Are you a DIY person who likes working with your hands and mind, tackling challenges, and taking things apart and fixing them? If yes, we want to talk to you! Here are some examples of the skills/experience/hobbies we find typical in our FSE employees: • RC Car and Planes, • Robotics experience, • Automotive repair, • Motorcycle rebuild and repair, • Bicycle repair/modifications, • Small engine repair, • Automation machine repair, • Mechatronics students, • Machine assemblers or repair The purpose of the Field Service Engineer is to ensure timely and cost-effective installation, repair, removal/relocation, and technical support of Durst products while maintaining a high level of customer satisfaction to all Durst customers. Your specific responsibilities include: • Provide timely and effective installation of Durst products and services., • Perform effective initial customer operator/maintenance training, as required., • Maximize Durst equipment uptime through timely response and effective/efficient repair and maintenance to ensure high levels of customer satisfaction., • Efficiently manage utilization of Durst assets (parts, tools, test equipment, autos) and resources (travel expenses, phone, etc.) to achieve targeted financial results., • Communicate and interact with customers, sales and other service counterparts in a positive, courteous and professional manner and always present a professional image to Durst customers. To be considered for this position, you must have these qualifications: • Previous experience in printing or related industry, • Great attitude and eagerness to learn, • Strong mechanical aptitude and good dexterity, • Excellent communication and customer service skills, • Proficient computer skills, • High school diploma or equivalent, • Experience or training within some form of mechanical discipline, • Willingness to travel as needed, typically up to 75% of the time (or more during your initial training period) - mostly overnight travel via car and plane throughout USA & Canada, • Valid driver license, • English proficiency, • Associates degree or equivalent training and/or experience, • At least a few years of field service experience, • Familiarity with reading schematics and wiring diagrams, • Hands-on experience with hand tools, • Working knowledge of multimeters for electrical testing, • Working knowledge of AC and DC up to 3 phase, • Strong understanding of computer hardware and software

Lead MEP Execution on $100M+ Data Center Projects Across the Southwest - Incredible company withe awesome benefits and pay!!! This Jobot Job is hosted by: Sam Kippen Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $150,000 - $200,000 per year A bit about us: Our client is a nationally recognized general contractor known for their expertise in large-scale, technically complex projects — including data centers, advanced manufacturing, and commercial facilities exceeding $100M in value. With a strong foothold in the Southwest, they’re expanding their mission-critical portfolio and seeking a skilled MEP Superintendent to join their growing team. Why join us? • Be part of a top-tier contractor leading the charge on cutting-edge data center builds., • Work on projects exceeding $100M, integrating high-density mechanical and electrical systems., • Join a company with a culture of collaboration, innovation, and long-term growth., • Enjoy competitive compensation, travel support, and strong benefits., • Lead teams that take pride in quality, safety, and technical excellence. Job Details • Oversee all MEP field operations for large-scale data center projects from start to finish., • Coordinate closely with project management, commissioning teams, and MEP trades to maintain schedule integrity and quality standards., • Supervise installation of complex mechanical and electrical systems, ensuring code compliance and safety excellence, • Lead start-up, testing, and commissioning phases for mission-critical environments., • 8+ years of experience leading MEP scopes on large commercial or data center projects ($100M+ preferred)., • Strong background in mission-critical, industrial, or high-density MEP systems., • Proven success managing large subcontractor teams in fast-paced environments., • Deep technical understanding of HVAC, power distribution, and controls., • Excellent communication and leadership skills with a focus on collaboration and quality. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Global leader in industrial applications for multiple industries! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $75,000 - $95,000 per year A bit about us: With offices worldwide, we are a global leader in industrial applications for multiple industries! Why join us? • Best in Class Organization!, • Competitive Compensation Package!, • Complete Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: • Designing and developing new control systems and strategies to improve production efficiency and product quality., • Implement and modify HMI, PLC, and robotic logic., • Testing, maintaining, and modifying existing systems to optimize operations., • Update and maintain documentation for electrical schematics and operational instructions., • Collaborating with design engineers, operations engineers, purchasers, and other internal staff., • Apply Lean Manufacturing principles and tools to drive continuous improvement initiatives., • Perform maintenance and updates to maximize system reliability and efficiency., • Bachelor’s degree in Electrical Engineering or a related field., • A minimum of 2 years of experience in a Controls Engineering role supporting manufacturing., • Expertise in Ladder Logic and Allen Bradley PLCs; GuardLogix experience is preferred., • Proficiency in robotic systems., • Strong electrical and electronic system troubleshooting capabilities., • Proficiency with tools including PanelBuilder, RSView 32, FT View, VisionWare, MotionWare, RSLogix (5, 500, 5000), Studio 5000, Ignition, Fanuc RoboGuide, Cognex Vision Tools, Keyence Vision Tools, and AutoCAD is preferred., • Excellent communication and interpersonal skills., • Strong analytical and problem-solving abilities., • A commitment to continuous professional development. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Industrial Electrician This Jobot Job is hosted by: Cody Timm Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $26 - $36 per hour A bit about us: Our client is a nationwide leader of Fabricated Metal Products in the US. They are hiring for a 2nd-shift Electrician to join their Milwaukee office on a full-time basis! Why join us? • Competitive hourly pay, • Sign-on bonus, • Great medical insurance options, • 401K matching, • PTO and paid-holidays off, • Bonuses, • Life and Disability insurance, • Opportunities for promotions Job Details Responsibilities: As an Industrial Electrician, your responsibilities will include but are not limited to: 1. Installing, maintaining, and repairing electrical wiring, equipment, and fixtures in accordance with relevant codes., 2. Inspecting electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair., 3. Reading and interpreting electrical drawings, blueprints, schematics, and wiring diagrams., 4. Installing and maintaining power controls, panel boards, and power distribution systems., 5. Using a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment., 6. Performing routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate., 7. Troubleshooting electrical problems, inspecting circuits and wiring for shielding and grounding, and testing electrical systems for continuity and proper voltage readings., 8. Following strict safety procedures and work methods while performing duties, and ensuring compliance with all applicable safety codes and regulations. Qualifications: To be considered for the Permanent Industrial Electrician role, candidates must meet the following qualifications: 1. Minimum of 3 years of experience as an Industrial Electrician, preferably in the manufacturing industry., 2. Proven experience with industrial and commercial electrical systems, including installing, troubleshooting, and repairing such systems., 3. Proficiency in using electrical instruments and equipment, reading wiring diagrams, and using test equipment and measuring devices., 4. Extensive knowledge of electrical systems, power controls, panel boards, and power distribution systems., 5. Ability to read and interpret technical documents and drawings., 6. Strong problem-solving skills and attention to detail., 7. Excellent communication and teamwork skills., 8. Must hold a valid electrician’s license., 9. High school diploma or equivalent required; further education in electrical engineering or a related field is a plus. If you are a skilled Industrial Electrician with a strong work ethic and a commitment to excellence, we encourage you to apply today. Join our team and help us continue to shape the future of the Fabricated Metals industry! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Work Authorization: Applicants must currently be authorized to work in the United States on a full-time basis. Steven Winter Associates (SWA) does not sponsor employment-based visas (e.g., H-1B, OPT, etc.) for this position, now or in the future. Why Steven Winter Associates? At SWA, you’re not just joining a company, you’re joining an employee-owned team committed to making buildings healthier, more sustainable, and lower-carbon. * Be part of a collaborative, and supportive environment where your ideas matter. * Work on real projects, seeing the impact of your work in the field and in communities. * Learn from experienced building science professionals. Why This Role Matters: This is a senior-level position based in the NYC area within SWA’s Building Operations, Decarbonization & Efficiency (BODE) team. In this role, you will drive sustainable value creation through innovative energy solutions for our clients with a focus on meeting local carbon emission mandates. By conducting comprehensive energy audits, decarbonization feasibility studies, and developing strategic retrofit solutions, you'll deliver measurable reductions in energy costs and carbon emissions. You'll advance our organizational capabilities through technical approaches to energy management, positioning SWA as leaders in sustainable building practices. The proposed annual salary range for this position is $85,000 - $130,000 based on a 40-hour work schedule. The final salary may vary depending on confirmed job-related skills and experience Responsibilities: Reasonable accommodation will be provided to enable individuals with disabilities to perform the essential functions * Optimize energy efficiency and reduce carbon footprint by conducting decarbonization feasibility studies, advanced energy audits and assessments, retrofit implementation, and retro-commissioning solutions for existing buildings. * Drive innovation and sustainability through technical solutions that address complex environmental challenges. * Improve ROI on energy investments by evaluating building equipment retrofits and upgrades, with emphasis on electrification and heat pump technologies to optimize energy efficiency. * Optimize building performance by evaluating construction documents and recommending enhancements to indoor air quality, energy efficiency, constructability, and operational effectiveness. * Contribute to the growth and success of the team by actively supporting and training junior colleagues. * Enhance industry expertise and performance by delivering comprehensive technical training programs for building professionals. Who You Are: * A bachelor’s degree in engineering field or related science degree. * 5+ years of relevant experience working with HVAC systems in large multi-family or commercial buildings. * Experience conducting field inspections related to mechanical, electrical, and plumbing equipment. * Demonstrate deep expertise in HVAC systems and emerging high-performance technologies. * Proficiency in MS Office Suite. What You Bring: * Evaluate and optimize HVAC and mechanical systems in large multi-family or commercial buildings by testing performance. * Ability to execute comprehensive energy assessments, feasibility studies, retro-commissioning evaluations and analyses to identify efficiency opportunities and sustainable improvement strategies. * Perform building energy calculations to predict, analyze and optimize building energy consumption patterns for energy efficiency improvements. * Success leading and delivering multiple small to medium-sized projects through stakeholder engagement, and team coordination to ensure successful outcomes. * Advanced proficiency in Excel and MS Office Suite. Application Process: * A cover letter is requested for consideration outlining interest. * Resumes will be reviewed on a rolling basis. Qualified candidates will be invited to complete a 30-minute technical assessment to evaluate their skills. Based on the assessment results, selected candidates will proceed to up to 3 rounds of interviews, with the final round including a presentation. * If you meet at least 75% of the qualifications, we encourage you to apply. * SWA is committed to inclusion and will provide reasonable accommodation for individuals with disabilities. Physical Requirements: While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to type, reach with hands and arms, talk, and hear. The employee frequently is required to climb stairs, use elevators and exterior construction hoists, and may be exposed to cold and hot interior and exterior temperatures for extended periods of time (when in the field). Travel Requirements: Occasional overnight travel may be required (Less than 10%). Frequent local field visits in the NYC Metro area will be necessary (approximately 40-50%). Boston-based candidates: Monthly travel to NYC required, plus additional project-based trips as needed. Working Environment: Recent hires may be required to work in-office five days per week during onboarding, with potential for a flexible schedule after necessary training and supervisor approval; all team members are expected in the office at least three days per week, with flexibility based on job duties and site work. EEO Statement: SWA is an Equal Opportunity Employer – all qualified applicants will be afforded equal employment opportunities without discrimination because of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, or marital status. DEI Statement: SWA is a workplace where we are aware and welcoming of the ways in which we are all diverse as evidenced by a culture of listening and understanding. We endeavor to create a workplace where people feel empowered to act; a safe place where people are open to discussing different views; ongoing education opportunities around diversity, equity, and inclusion; and to build a culture of belonging and accountability. What to Know: Steven Winter Associates, Inc. (SWA) is a proud employee-owned firm that’s been transforming the built environment for over 50 years. Our mission is to make buildings more sustainable, energy-efficient, accessible, healthy, and resilient, not just with better structures, but to the communities they serve. Working with architects, engineers, developers, owners, and project teams, our team of consultants is always pushing boundaries, collaborating, and problem-solving to deliver solutions that benefit people and the planet. Join us and become part of a company where your work helps shape a better built environment—and where your voice matters. For further information on Steven Winter Associates, please visit . March 2026v

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Why Join us? At Voyant, you’ll be part of a team turning cutting-edge research into real-world products. As a growing startup, we offer interns the chance to make a meaningful impact, work closely with senior engineers, and learn what it takes to build disruptive sensing technology. This is more than an internship — it’s a chance to grow your technical skills and career in one of the most exciting fields of hardware innovation. You will do: * Execute PCB test plans using bench equipment (power supplies, oscilloscopes, digital multimeters, etc.) and document results * Perform soldering (hand soldering and/or hot air rework) for board bring-up and modifications * Contribute to PCB design, including schematic capture and layout tasks * Assist the engineering team with lab organization, test setup, and debugging activities Position Overview We are seeking an Electrical Engineering Intern to join our hardware team. This internship offers the opportunity to gain hands-on experience in PCB testing, design, and prototyping, while working closely with experienced engineers in a fast-paced startup environment. Location: NYC Duration: 4 months Hours: ~12+ hours per week Qualifications * Currently pursuing a degree in Electrical Engineering or a related field * Familiarity with bench test equipment (oscilloscopes, power supplies, DMMs, etc.) * Basic soldering experience (hand or hot air) * Exposure to PCB design tools (e.g., Altium, KiCad, or similar) * Strong attention to detail and eagerness to learn in a collaborative environment What We Offer * Team events and company meetups * Complimentary lunch provided daily at our NYC office * A professional network with extremely talented engineers Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.

Job DescriptionYou’ve Never Been Satisfied with "Good Enough." You want to make an impact, not just manage projects, but change how the world gets built. At Accenture Infrastructure & Capital Projects, you’ll do exactly that. You’ll help develop and deliver the factories, grids, transit systems, and public infrastructure that keep communities moving - and do it smarter, safer, and more sustainably than ever before. You’ll work alongside people who think big and act bold - project managers, engineers, technologists, and strategists who blend real-world experience with digital innovation and AI. Together, we’re transforming how capital projects are planned, managed, and executed, creating a better way to build for the future. Because “good enough” builds the past. You’re here to build what’s next, on a team that outperforms every norm. Visit us here to learn more about Accenture Infrastructure & Capital ProjectsAs Accenture continues to grow, you may see a variety of new career opportunities, and depending on the role and location you may be directed to apply through Accenture Infrastructure and Capital Projects LLP or one of our other legal entities - Accenture Infrastructure and Capital Projects, LLC or Accenture Infrastructure and Capital Projects Inc., with benefits varying by country and role, so please check with your recruiter for details.HERE’S WHAT YOU’LL DO: • You'll be responsible for planning, coordinating, and supervising commissioning and testing activities for electrical substations, ensuring compliance with technical standards, quality requirements, and safety regulations., • You'll lead multidisciplinary teams during commissioning, providing technical guidance, and resolving on-site issues., • You'll review, validate, and document test procedures and results to ensure alignment with design specifications, regulatory requirements, and company standards., • You'll collaborate closely with contractors, design engineers, operations teams, and clients to support successful project execution., • You'll maintain project timelines, budgets, and safety standards throughout all phases of testing and commissioning., • Flexible: The work location for this role will include a mix of working remotely, onsite at a client or in an Accenture office or center., • With all our roles, there is some in-person time for collaboration, learning and building relationships with clients, peers, leaders and communities. As an employer, we will be as flexible as possible to support your specific work/life needs. HERE’S WHAT YOU’LL NEED:, • Must have a BS/BA degree in an engineering discipline from an ABET (or Owner approved equivalent) accredited college/university, and 5 years’ experience in the following areas: Construction, maintenance and testing of electrical equipment, Relay protection and control systems, Start-up and commissioning of electrical equipment and systems, Electrical Field engineering, Arc Flash safety training, Troubleshooting of electrical equipment or systems., • SCADA and communication systems Specialized advanced training is also required (e.g., PTI. WPI, ECNE PUI, a graduate level engineering degree)., • Professional experience in commissioning and testing of electrical substations, including supervision of construction, commissioning, and energization activities, • Professional knowledge of electrical systems, protection & control, and substation equipment, • Ability to lead and coordinate multidisciplinary teams in the field, • Professional experience with problem-solving and decision-making under project deadlines, • Strong communication and stakeholder management abilities, • Willingness to travel and work on-site across New York StateBONUS POINTS IF YOU HAVE:, • Bachelor’s degree in electrical engineering or related fieldCompensation at Accenture varies depending on a wide array of factors, which may include but are not limited to the specific office location, role, skill set, and level of experience. As required by local law, Accenture provides a reasonable range of compensation for roles that may be hired in Illinois, Minnesota, California, Colorado, District of Columbia, Maryland, Massachusetts, New York, New Jersey, Ohio or Washington as set forth below. We accept applications on an on-going basis and there is no fixed deadline to apply.We believe that no one should be discriminated against because of their differences. All employment decisions shall be made without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our rich diversity makes us more innovative, more competitive, and more creative, which helps us better serve our clients and our communities. For details, view a copy of the Accenture Equal Opportunity and Affirmative Action Policy StatementAccenture is an EEO and Affirmative Action Employer of Females/Minorities/Veterans/Individuals with Disabilities. Accenture is committed to providing veteran employment opportunities to our service men and women.

Job Description Our Vision: To make New York City the global model for inclusive innovation and economic growth, fueled by the City's diverse people and businesses. Our Mission: Creating a vibrant, inclusive, and globally competitive economy for all New Yorkers. The Asset Management Property Operations Department is responsible for protecting and enhancing the value of City-owned real estate assets and serving the operational needs of tenant businesses. In addition, the Department assists EDC in the allocation of resources among its properties. Position Overview: This is a field position that will provide technical leadership and operational oversight for a diverse campus of industrial, commercial, and waterfront assets located in Sunset Park, Brooklyn. This role is responsible for ensuring the safe, compliant, and reliable operation of complex building systems across multiple facilities while supporting the long-term stewardship of public assets. The Senior Facility & Building Engineer is a highly skilled, hands-on technical professional responsible for the operation, maintenance, troubleshooting, and repair of building systems. This role works directly in the field, leading by example while ensuring building infrastructure operates safely, efficiently, and reliably. The position supports critical systems, performs advanced repairs, and provides technical guidance to junior staff and vendors. Essential Duties and Responsibilities: Technical Leadership & Building Systems • Provide senior-level oversight and hands-on maintenance, troubleshooting, and repairs of building systems, including HVAC, electrical distribution, plumbing, fire/life safety, and building automation systems., • Serve as the primary technical authority for diagnosing system failures, identifying root causes, and performing corrective and preventive solutions., • Establish standards and best practices for building operations, maintenance, and system performance across the campus., • Review and approve technical scopes of work, engineering recommendations, and system designs., • Oversee day-to-day facilities engineering activities across multiple buildings and asset types, ensuring continuity of operations., • Conduct regular inspections of facilities, mechanical rooms, rooftops, and infrastructure to assess condition, safety, and compliance., • Lead and manage third-party vendors, contractors, and consultants providing maintenance, repair, and engineering services., • Review proposals, negotiate scopes, monitor performance, and approve invoices to ensure quality, compliance, and cost effectiveness., • Lead and support capital improvement projects, major system replacements, and infrastructure upgrades from planning through closeout., • Partner with project managers, architects, and engineers to ensure constructability, maintainability, and operational efficiency., • Ensure compliance with all applicable local, state, and federal regulations, including NYC DOB, FDNY, OSHA, EPA, and environmental requirements., • Lead fire/life safety programs, inspections, testing, and corrective actions., • Support energy management, sustainability, and climate resiliency initiatives aligned with City and agency goals., • Identify opportunities to improve energy efficiency, reduce operating costs, and enhance system resilience., • Serve as a senior technical point of contact for internal stakeholders, tenants, and partner agencies., • Communicate complex technical issues clearly to non-technical audiences., • Smart building systems: Implement and maintain advanced technology like building automation systems (BAS) to monitor and control HVAC, lighting, and security remotely. Ongoing Development: While not required at the time of hire, the following certifications (not limited to) are encouraged and can be obtained during employment: • OSHA 30 Hour, • FDNY S12 Supervision of Sprinkler Systems (Citywide), • FDNY S13 Supervision of Standpipe Systems (Citywide), • FDNY S95 Supervision of Fire Alarm Systems, • Backhoes/heavy equipment training (Dump Truck/front-end loader/skid steer/backhoe), • NYS CDL Driver license, • NYS Driver license Class D, • Power Industrial Truck Certification, • Aerial Work Platform Certification, • CPR/AED Training, • Bachelor's degree in Engineering (Mechanical, Electrical, Facilities, or related field) or equivalent experience., • Professional Engineer (PE) license preferred., • 5+ years of progressively responsible experience in facilities engineering, building operations, or infrastructure management., • Demonstrated expertise in managing complex building systems across multiple assets.Strong knowledge of HVAC, electrical distribution, plumbing, and building codes., • Familiarity with Building Automation Systems (BAS), CMMS, and system integration., • Excellent troubleshooting and technical problem-solving abilities., • Strong knowledge of NYC building codes, regulatory agencies, and inspection processes., • Proven experience leading vendors, consultants, and capital projects., • Ability to make independent technical decisions and exercise sound judgment in high-impact situations. NYCEDC is committed to offering competitive benefits to support employee health, happiness, and work-life balance. We offer comprehensive benefits and unique perks to ensure NYCEDC employees flourish in their professional and personal lives: • Generous employer subsidized health insurance, • Medical, dental, and pharmacy plans, • Vision and hearing benefits, • Flexible spending accounts for healthcare and dependent care, • Short term and long-term disability coverage, • 100% employer covered life insurance and supplemental life insurance coverage, • Up to 25 vacation days, • Floating Holidays and Summer Fridays, • Parental leave - up to 20 paid weeks, • Retirement savings programs, • Company-paid 401(a) defined contribution plan, • 457(b) tax-advantaged retirement savings plan, • Tuition Reimbursement program, • Continuing education and professional development, • Public Service Loan Forgiveness (PSLF) eligible employer, • College savings plan, • Backup childcare, • Gym membership discounts, • A Calm.com membership for mindfulness and mental health support The New York City Economic Development Corporation is an Equal Opportunity Employer. Our Diversity, Equity, and Social Responsibility Mission is to create a People First strategy by attracting, retaining, and engaging a diverse and talented workforce. Like the city of New York, NYCEDC knows our strength comes from each of our connected parts, making the fabric of our organization better and stronger because of our unique employees' talents. For more information, visit our website at edc.nyc.

Job DescriptionSalary: $110,000-$140,000 Title: Quality Engineering Manager Hours: Full-time Location: Brooklyn, NY or Midvale, UT #LI-Hybrid Reports to: Product Development Compensation: A base salary range of $110,000-$140,000 gross per year, depending on candidate experience. Our Benefits: • Comprehensive Healthcare Coverage: Medical, dental, and vision plans with BioLite covering 90100% of monthly premiums, depending on plan selection., • 401(k) with Employer Match: We help you invest in your future through a company match on your 401(k) contributions., • Paid Time Off: Paid holidays, vacation, sick time, and family leave to support work-life balance., • Equity & Bonus Opportunities: Community bonus plan and stock option eligibility for all full-time employees., • Adventure Stipend (after two years): Matched vacation and PTO to go on an adventure that aligns with outdoor recreation, climate action, or social impact., • Employee Product Discount: Employees enjoy generous discounts on BioLite and Goal Zero products. The Role: We're looking for a hands-on, systems-minded Quality Engineering Manager to oversee product quality from the factory line to field performance. You will ensure that our products are meeting the highest expectations of our customers. You'll lead root-cause investigations, translate field feedback into applicable engineering projects, and partner with Engineering, Operations, and our contract manufacturers to drive measurable quality improvements. This is an ideal role for someone who excels at the intersection of technical depth, structured problem-solving, and execution. The Impact you'll Have: Product Quality & Sustaining Engineering • Oversee sustaining engineering for our full product catalog, ensuring long-term reliability and performance across multiple brands., • Lead the end-to-end Warranty and Sustaining process, including project management of design refinements or manufacturing improvements required post-launch., • Provide project resource estimates to aid in project prioritization, • Manage "deep-dive" technical investigations into field failures or complex quality escalations to identify causes and implement permanent solutions., • Manage high-level quality correspondence and escalations, prioritizing engineering efforts based on brand impact and customer experience., • Provide direct management, mentorship, and daily guidance to the Quality Engineering team (currently 2 engineers) and external compliance consultants. Global Compliance & Documentation • Manage global product compliance with a focus on international requirements (e.g., EU regulations) and new battery and solar standards., • Oversee certification testing and Finished Good Inspections (FGI) for off-grid products , ensuring goods ship at required standards., • Serve as the technical point of contact for the sales team, providing essential compliance and safety documentation for global retail partners., • Maintain and improve technical troubleshooting guides to empower the wider Customer Service and Technical Support teams. Emerging Markets & Specialized Technology • Provide dedicated sustaining and warranty support for our specialized emerging markets portfolio., • Own technical oversight of our proprietary pay-as-you-go and specialized energy software/hardware interfaces., • Provide technical documentation and performance data to support external reporting and grant requirements. The Experience you Bring: • 5+ years of relevant work experience in Quality Engineering, specifically focused on the consumer electronics hardware space., • A degree in Mechanical or Electrical Engineering (or relevant senior-level technical experience)., • A diverse background in product lifecycle management, including a mix of Quality, Sustaining, and Product Engineering., • Strong working knowledge of hardware compliance and global regulatory requirements (EU, UL, UN, IEC, VeraSol, etc.)., • A deep knowledge of the warranty lifecycle, including root cause analysis, special investigations, and "design-for-reliability" improvements., • A willingness to get involved in technical troubleshooting, while maintaining a strategic perspective on brand quality and safety., • Command of essential Quality tools like Fishbone Analysis, Pareto Charts, 8D Methodology, 5 Whys, FMEA, • Experience with advanced Quality tools such as Statistical Process Control and Design of Experiments, • Experience generating comprehensive recommendations for prioritization and resource needs, considering technical issues, brand/customer risk, and economic impacts, • Experience managing or collaborating with engineers and technicians across several disciplines (Quality, Sustaining, Compliance)., • An understanding of global manufacturing, including finished goods inspections, third-party lab coordination, and supply chain accountability. To Apply: Please include a cover letter explaining why you're a good fit for this position and PDF of your resume. About Us: BioLite and Goal Zero have joined forces to power life, anywhere. Together, we provide clean energy solutions that serve two distinct but connected markets: families living in energy poverty and outdoor adventurers looking for fuel-independent power and light.From solar panels and portable power stations to cookstoves and lighting systems, our technologies help people cook, charge, and stay connected, whether at home, on the road, or off the grid. Rooted in innovation and motivated by impact, we're building a future where renewable energy is accessible to all. We believe in a bright and safe future, and that includes life at work. BioLite and Goal Zero are proud to be an equal opportunity workplace where everyone is encouraged to show up as their full selves. We know that inclusion makes our solutions better and our team stronger.

Job DescriptionDescription: Introduction Established in 1918, Guardian Service Industries is a 4th generation family-owned Janitorial, Security, Pest Control, and Engineering & Operations staffing corporation. We provide a comprehensive range of essential facility management services to over 1,000 clients across various sectors, inclusive of commercial and government buildings, residential communities, schools, industrial facilities, transportation hubs, and retail outlets throughout the East Coast and New England. Job Description: Responsible for assisting with the daily operation, maintenance, preventative maintenance and repairs of building plumbing, electrical, HVAC and all other building systems. Must have working knowledge of all building mechanical, electrical, HVAC, plumbing, life safety, and fire protection systems to ensure proper operations and be able to act upon any conditions that are out of the ordinary. Essential Job Duties Under the Direction of the On-Site Technician: 1. Inspect building, grounds and equipment for unsafe or malfunctioning conditions., 2. Assist with periodic general preventative maintenance on the mechanical, electrical, HVAC, and plumbing systems. This involves normal lubrication, adjustment, cleaning, replacement of consumable parts (such as filters, belts, indicator lights, etc.), and periodic testing of the equipment. These systems include, but are not limited to air handling units, re-circulating air systems, water pumping systems, cooling plant and its associated mechanics and all plumbing system components., 3. Assist with installation and modification of building equipment systems., 4. Respond quickly to emergency situations., 5. Perform basic electrical and plumbing repairs and troubleshooting., 6. Perform basic mechanical projects., 7. Assist with all assigned work to ensure the safety of the building's tenants and the continuous operation of the site., 8. Prioritize service calls and follow-up upon completion., 9. Coordinate maintenance efforts with outside contractors and technicians when work cannot be performed in-house. Coordinate contractor, tenant and management approvals for work orders that require the use of an outside contractor., 10. Order parts and supplies as required and maintain stock and inventory control., 11. Be responsive to tenant complaints in the areas of safety, plumbing, mechanical, electrical and environmental needs through both personal contact and work order systems., 12. Be familiar with and conform to all written operating procedures associated with site., 13. Ensure the cleanliness and appearance of all work areas., 14. Maintain a professional appearance and manner at all times, keep calm demeanor in emergency situations and act as a team member., 15. Perform other duties as assigned. Skills, Education and Experience: · Minimum of two (2) years of experience in building maintenance · Ability to handle multiple projects and make decisions · Knowledge and understanding of blueprints · Customer service, communication and computer skills · High School Diploma or Equivalent Other Job Requirements: · Available and on call 24/7 · Able to lift 50 pounds · Able to climb ladders Nassau County, Long Island $72,800.00/yr Our company participates in E-Verify to confirm the identity and employment eligibility of all new hires. Guardian Service Industries is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, age, marital status, sexual orientation, gender identity, pregnancy, citizenship, status as a protected veteran, or status as a qualified individual with disability, or any other characteristic protected by applicable law. Guardian Service Industries is committed to integrity, excellence, and diversity among its employees. Requirements:

Job Description Currently we are looking for Professional Engineer Field Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $55hr - $70/hr Based on Certification & Experience Professional Engineer Field Inspector Role Overview The Professional Engineer (PE) Field Inspector provides advanced inspection, verification, and technical oversight services for Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, and the International Building Code (IBC), as applicable to each project. This position is responsible for verifying that construction activities, materials, installations, and systems conform to approved design documents, specifications, code requirements, and project standards. The PE Field Inspector serves as a senior technical presence on site, providing engineering judgment where required and supporting compliance-driven decision-making on complex or high-risk work elements. The role requires maintaining an active on-site presence during construction operations, witnessing required inspections and testing, and coordinating closely with contractors, construction managers, special inspectors, laboratories, and client representatives. The PE Field Inspector is expected to proactively identify deviations from contract documents, document non-conforming work, issue Non-Conformance Reports (NCRs) as necessary, and verify the implementation and effectiveness of corrective actions. This position plays a critical role in ensuring structural integrity, life-safety compliance, constructability alignment, and regulatory adherence, particularly on projects involving complex systems, specialty construction, or heightened oversight requirements. • Work responsibilities may include but are not limited to the following:, • Review and verification of complex or delegated design elements, • Oversight of specialty inspections and testing programs, • Engineering evaluation of non-conforming work and proposed corrective actions, • Field verification of structural, civil, MEP, and specialty systems, • Coordination with design engineers for field clarifications and RFIs, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one of the following: § Structural § Civil § Marine § Mechanical § Electrical § Fire Protection In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job Description About Coresite: At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Engineer Role: As a member of the company’s Engineering team, the Data Center Design & Performance Engineer is responsible for designing and reviewing electrical, mechanical, and site plans. This role requires making independent decisions and consistently exercising sound judgment to ensure alignment with CoreSite’s design standards. A strong understanding of electrical and mechanical systems, particularly in relation to data center redundancy and operations, is essential. The Engineer will collaborate closely with facility and operations teams to ensure all equipment installations are thoroughly reviewed and meet CoreSite's build standards. Duties: • Evaluate the efficiency, reliability, and engineering design of electrical, mechanical, plumbing, fire and life-safety, and building management systems for expansion and upgrade projects, • Define the scope for testing and commissioning to ensure design intent and operability of systems supporting the data centers, • Provide final quality assurance sign-off for engineered systems at the end of construction, • Collaborate with Sales Engineering to design custom engineering solutions for customer deployments, • Support the sales process for complex opportunities by providing technical expertise, • Assess installed systems to optimize efficiency and reliability, • Review and approve engineering modifications to existing facilities, • Provide engineering support to Data Center Operations, including failure analysis and system maintenance of critical infrastructure, • Ensure quality control for Operations teams, focusing on equipment, safety, and maintenance best practices, • Support commissioning activities by reviewing test scripts and witnessing test performance, • Maintain up-to-date documentation related to design, procurement, and operational standards, • Special projects as assigned Knowledge, Skills, & Abilities: • Ability to work 40% on-site from an approved CoreSite Market and 60% remotely from that same market, with flexibility to adjust onsite expectations as business needs evolve, • Ability to travel up to 40% of the time to support testing and construction activities, with flexibility to adjust travel commitments as business needs evolve. Must demonstrate adaptability in managing travel requirements in response to company growth, • In-depth working knowledge of data center design, operations, and infrastructure, • Strong strategic problem-solving abilities with a proactive approach to challenges, • Proficiency in AutoCAD, or other computer aided design software, as well as in Microsoft Office, primarily Excel, • Ability to operate and interpret results from test equipment, such as power quality meters, thermal imaging cameras, multi-meters, to evaluate and troubleshoot equipment operation and performance, • Commitment to personal development and the ability to pursue relevant certifications and accreditations (i.e. LEED AP, CDCDP, etc.), • Excellent written and verbal communication and problem-solving skills, with the ability to collaborate effectively with diverse personalities and cross-functional teams in both on-site and remote environments, • Bachelor’s degree in Engineering or a related field preferred; equivalent work experience, preferably within the data center, telecommunications, or real estate industry, considered in lieu of educational qualifications. The physical demands described here are representative of those that must be met by an employee to successfully perform the job’s essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the job’s duties, the employee is occasionally required to stand; walk, sit, use hands to handle or feel objects, reach with hands and arms, climb stairs, balance, stoop or kneel, talk, and hear. The employee must occasionally lift and/or move up to 25 pounds. Ability to travel is required. Compensation: Compensation for this role includes a base salary between $110,000 to $135,000 annually. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Posting Timeline: This position is expected to be posted through April 15, 2026. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for Cigna, • Healthcare and dependent care flexible spending account (FSA) plans, • Health saving account (HSA) plans for employees participating in the High Deductible Health Plan, • Life, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount, • 16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job Description Now Hiring - Start Immediately! First Student is hiring immediately for a Mechanic / Maintenance Technician II. In this role, you'll play a critical part in keeping our fleet road-ready and dependable-supporting a safer ride for the children in our community. Why Join First Student? In addition to a supportive, safety-first culture and stable full-time work, we proudly offer: • Pay: $25.00/ hr, • Full benefits package, including health, dental, vision, and 401(k) with company match, • Paid time off including holidays and vacation, • Annual tool & gear allowances - boots and prescription safety glasses, • Ongoing, state-of-the-art training programs to support your career growth As a Technician at First Student, your day-to-day work ensures our vehicles are maintained and safe for our passengers. You'll complete both routine and advanced repairs, handle emergency service calls, and work under moderate supervision. You may also provide mentorship to entry-level technicians. Key Responsibilities: • Perform maintenance and repairs on vehicles including:, • Brakes, suspensions, drivetrains, and transmissions, • Electrical components, fluid systems, filters, belts, batteries, and hoses, • Conduct preventive maintenance (PMs), DOT inspections, and diagnostic troubleshooting, • Maintain detailed service records, complete accurate work orders, and track parts usage, • Support emergency roadside service calls when needed, • Clean vehicles and maintain the shop environment, • Safely move vehicles around the yard or between work areas, • Repair and maintain shop tools and equipment You might be a perfect fit if you: • Want a job that directly supports your community, • Have 3+ of experience working with diesel, gas, electric, or CNG vehicles, • Are comfortable using hand tools and diagnostics software, • Are a strong problem solver who thrives both independently and on a team, • Have a valid driver's license and are willing to obtain a CDL (we'll help with training!), • Have or are willing to build a personal mechanic tool set, • High school diploma or GED (preferred), • Vocational or technical training in vehicle repair (preferred), • Class B CDL with passenger endorsement (or ability to obtain within 3 months), • ASE Certifications (preferred, with requirement to begin ASE testing within 1 year), • Experience performing DOT inspections and vehicle safety assessments, • Maintenance shop environment with dust, dirt, grease, and various weather exposure, • Must be able to lift at least 50 lbs and work in crouched or prone positions beneath vehicles First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request .

Job Description High Rise Fire and Security, affectionately known as High Rise, founded in 1992, is a leading fire alarm, life safety and security systems solutions provider. We provide a broad range of products and services including, but not limited to, the design, installation, service and maintenance of Fire Alarm, Auxiliary Radio Communication, Area of Refuge, Parking Garage Gas Detection, Card Access, Camera Surveillance, Video Intercom and Intrusion Systems. High Rise is an Edwards Systems Technology (EST) Strategic Partner and a multi-year winner of “Strategic Partner of the Year Award” for the Northeast Region. We are the first North American member of the SCUTUM Group. SCUTUM, founded in 1989, is a fast-growing, privately owned, leading European life safety company with offices in France, Germany, United Kingdom, Belgium, the Netherlands and Luxembourg. SCUTUM complements our solutions with additional products, services and expertise in electronic security, cyber security and defense security with an Artificial Intelligence (AI) platform. At High Rise, we pride ourselves on our ability to maintain thorough and up-to-date industry knowledge. Our employees are equipped with comprehensive knowledge and extensive experience in providing life safety system and electronic security solutions throughout New York City, SE Florida and the surrounding areas. We are currently looking for an Installer to add to our team. With a solid reputation in the market, ever so growing Client base, cutting edge products and services, now is a great time to join our team. Required Education and Experience • High School Diploma or GED equivalent / Some Trade School / 6 months to 2 years trade school certification and 4 years of fire alarm and/or security experience, • Conduct visual inspection for wear and tear on all fire alarm devices to include fire alarm control panel, batteries, data gathering panel (DGPs), notification appliances, initiating devices, and remote annunciators as per NYC, NFPA, and HRFS requirements, • Conduct mechanical testing on all applicable fire alarm devices as per NYC, NFPA, and HRFS requirements, • Conduct test and response on all applicable fire alarm devices as per NYC, NFPA, and HRFS requirements, • Sanitize all fire alarm devices for proper upkeep and maintenance, • Serve as lead technician on a small installation job, i.e. addition, by managing client relationship on site, providing onsite training to junior technicians, leading the onsite safety briefings (“Toolbox Talks”), and monitoring technician parts to maintain adequate stock levels, • Respond to service requests, • Read and understand system status on Fire Alarm Control Panel (condition, address, device), • Conduct diagnostic tests to determine cause of alarm and/or trouble system status, as well as ground faults, • Requisition required parts when necessary to repair problem, • Adjust, replace, or repair defective device(s) to meet NYC, NFPA, and HRFS requirements, • Conduct testing on all repaired devices as per NYC, NFPA, and HRFS requirements, • Identify code issues and non-conformance issues, and make recommendations on alternative solutions to client/office, • Elevate status of service call to Programming Unit as required, • Study blueprints and schematics and determine methods, materials, and equipment needed to complete assignment, • Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters and voltmeters to ensure compatibility and safety of system, • Perform technician routine maintenance on tools, test equipment, etc., • Plan the layout of wiring systems; measure, cut, and bend wire conduits, • Thread conduit ends, connect couplings, and fabricate and secure conduit support brackets, • Drill holes and pull or push wiring through openings, • Dig trenches or holes for installation of conduit or supports, • Strip insulation from wire ends and attach wires to terminals for subsequent soldering, • Install electrical and electronic control systems and insulated cables, • Assemble and fabricate electrical and electronic components and appliances, • Connect electrical power to sound and visual communication equipment, signaling devices, and heating and cooling systems, • Test completion of circuits using test equipment, • Test for, locate, and repair electrical malfunctions in wiring and parts, • Paint a variety of objects related to electrical functions, • Maintain tools, vehicles, and equipment and keep parts and supplies in order, • Ensure job site is left in a better state than when we started, • Communicate and coordinate with clients on job scope and with line manager and report on progress on a regular basis, • Maintain accurate records of all work performed, materials used, and communicate any problem encountered or identified with the alarm system on work order, • Generate system status reports upon completion of testing and inspecting, • Full knowledge of fire alarm systems and operation, and fire alarm terminologies, • Ability to interpret and apply blueprints, schematics and drawings, maintenance manuals, and assembly instructions, • Understanding and application of NYC Building codes and NFPA fire alarm codes, • Familiarity with all local electrical codes, i.e. Article 760 of National Electrical Code (NEC), • Full knowledge of fire alarm products, EST products preferred, • Strong technical and analytical skills, i.e. diagnosing the cause of electrical breakdowns, • Ability to make recommendations on alternative solutions to client / office, • Ability to function in a self-directed environment, • Effective use of hand tools (meter, toner, etc.), • Understanding of basic electronics and electrical theories and principles (Ohm’s Law, AC/DC, etc.), • Ability to demonstrate the safe use of ladders, scaffolding, lifts, and related equipment required, • Knowledge of proper grounding and bonding methods, • Familiarity with electrical equipment and proper terminology, and an understanding of the dangers of live electricity, • Ability to make mathematical computations and color coding, and possess manual dexterity, • Acceptable report writing procedures, • Good listening, verbal, and written communication skills, • Good time management skills, • Understanding of all company policies and procedures, • Possess S-78 certification or obtain it within 3 months of hire, • Ten-Hour OSHA Construction Safety Certification, • Four-Hour DOB Scaffolding Certification within 3 months of hire, • Completion of HRF Client Service and technical training within the first 3 months of hire, • Obtain and maintain S-98 certification within 3 months of hire

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description Broad Function and Purpose of Position: Individual will work a 2nd shift work schedule and Document, analyze and test computer control systems related to user system design specifications and machine operating systems. Perform maintenance and calibration activities on devices and instruments. Troubleshoot existing equipment and control systems for efficiency and operation. Specific Responsibilities: • Application of systems analysis techniques and procedures, including consulting with users to determine hardware, software, or system functional specifications for control systems., • Documentation, analysis and testing of computer systems or programs, based on and related to user system design specifications., • Documentation, testing of computer programs related to machine operating systems., • Maintain, repair, and troubleshoot devices/instruments and labeling equipment., • Manage the Calibration Program, including schedule of calibrations, perform calibrations on specific instruments, maintain Calibration Manager Software compliant with ISO 9000 requirements, etc., • Perform scheduled maintenance of specific electrical and electronic devices and systems., • Provide weekend support, including on-site troubleshooting, if needed, to the plant operations in the field of controls.Qualifications, • Excellent analyzing, testing, and troubleshooting skills and organized approach to problem-solving., • Strong electrical background., • Experience with computer systems, programs, and PLC’s (Allen-Bradley desirable). Also, with pneumatic and hydraulic devices., • Ability to read technical drawings (P & ID’s), ladder logic diagrams; perform instrument calibrations. Good communication skills, ability to work independently or on a team., • Experience in ISO 9000 and/or process type (chemical/pharmaceutical/food) industrial facilities, • 3-5 years’ experience or minim 1 year plus Technical School. College degree a plus. Additional Information · 401k with Generous Company Match · Bonuses · Medical, Dental, and Vision Benefits · Paid Parental Leave · Life Insurance · Disability Insurance · Paid time off, paid holidays · Floating holidays + Paid Volunteer Time · Wellness/Fitness Reimbursements · Education Assistance · Professional Development Opportunities · Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description At Brightcore Energy, we specialize in turn-key solutions that simplify the clean energy journey for large commercial and industrial clients. Whether it's cutting-edge geothermal systems, solar, energy storage, or smart building technologies, we bring expertise, innovation, and a seamless approach to every phase of a project – from planning and design to implementation and ongoing support – thereby streamlining project timelines, reducing costs, and eliminating scope gaps. Summary/Primary Role: This role is responsible for preparing accurate and competitive cost estimates for geothermal and mechanical construction projects. This role analyzes drawings, specifications, and subsurface data to develop detailed pricing for ground source heat pump systems, piping, drilling coordination, and associated mechanical scopes. The estimator works closely with preconstruction, engineering, and operations teams to support successful project pursuit and execution. Principal Duties & Responsibilities: (Management may amend or assign duties and responsibilities to this job at any time) • Prepare detailed cost estimates for mechanical systems, including labor, materials, equipment, and subcontracted work., • Analyze blueprints, specifications, and scopes of work to develop accurate cost estimates for labor, materials, equipment, and subcontractors related to mechanical systems, including HVAC, plumbing, and piping, in support of geothermal and energy infrastructure projects., • Coordinate pricing and scope alignment with mechanical, electrical, and plumbing (MEP) contractors, specialty vendors, and suppliers., • Participate in pre-bid meetings, site walks, and subcontractor audits as needed. Estimated travel requirement: up to 25%., • Ideally has strong HVAC, plumbing, or piping backgrounds with the ability to provide support to onboard into geothermal-related work., • Thorough knowledge of piping, plumbing and mechanical system operations., • Estimating, budget, cost control, scheduling, and management of multiple bids., • Solid understanding of wide variety of HVAC equipment and materials., • Review construction drawings, specifications, geotechnical reports, and RFP/RFQ documents., • Perform quantity takeoffs for piping, heat pumps, mechanical equipment, and related components., • Analyze historical cost data and market conditions to ensure competitive pricing., • Participate in pre-bid meetings, site visits, and scope reviews., • Identify risks, value engineering opportunities, and constructability considerations., • Collaborate with project managers and engineers to ensure smooth handoff from estimate to execution., • Maintain estimating databases, templates, and cost libraries., • Assist with post-bid reviews and cost variance analysis., • Bachelor's degree in Mechanical Engineering, Construction Management, or related field (or equivalent experience)., • 3–7+ years of mechanical estimating experience, preferably in geothermal or HVAC., • Strong understanding of mechanical systems, piping, and HVAC equipment., • Ability to read and interpret construction drawings and specifications., • Proficiency in estimating software, CAD drawings and Microsoft Excel., • Strong analytical, organizational, and communication skills. This position does not have supervisory responsibility. Expected Hours of Work: An Employee is expected to work a minimum of forty (40) hours per week. Non-exempt employees are eligible for overtime pay in accordance with applicable wage and hour laws, while exempt employees may be required to work additional hours as necessary to fulfill their job responsibilities. Overtime requirements will be determined based on the operational needs of the organization. The salary range and/or hourly rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job advertisement and may be modified in the future. When determining an employee's base salary and/or rate, several factors may be considered as applicable (e.g., location, specialty, years of relevant experience, education, credentials, and internal equity). Brightcore also offers a comprehensive set of benefits to compliment the base salary. The base annual salary range for this position is $100,000-$130,000 and is eligible for an annual performance-based bonus. Travel Requirements: • Travel required up to 75% to work/project sites in the greater Northeast Region (but not limited to) of the United States., • Work site setting. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Brightcore Energy is committed to a safe workplace free of drugs and alcohol. All Brightcore Energy positions require a pre-employment background check that includes prior employment verifications, a criminal history check, and a pre-employment drug screen. In accordance with DOT regulations (49 CFR § 40.25), Brightcore Energy is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Brightcore Energy to obtain these records, the individual will not be permitted to perform safety-sensitive functions. Office/Remote/Field Work: We offer a variety of structured work arrangements, including remote, hybrid, and field-based assignments, aligned with organizational needs and role-specific requirements. Work arrangements are role-dependent, with guidelines established based on position requirements and business needs. This policy is subject to change at Brightcore's discretion. Brightcore Health Benefits Overview: Brightcore offers a full slate of medical, dental, and vision benefits including options to enroll in a Flexible Spending Account (FSA) and a Health Savings Account (HSA). 401k Plan: Brightcore currently offers both traditional and Roth 401k plans with a dollar-for-dollar match of up to 3% of contributions and $0.50 on the next 2% for a total potential match of 4% annually. Other Benefits & Perks: • PTO, • Financial Wellness Benefits, • Benefit Concierge Program through Health Advocate, • EAP - Employee Assistance Program, • Disability, Life, & AD&D Benefits Brightcore Energy is an Equal Opportunity Employer, providing equal employment and advancement opportunities to all individuals. We recruit, hire and promote into all job levels the most qualified applicants without regard to race, color, creed, national origin, religion, sex (including pregnancy), parental status, age, disability, genetic information, citizenship status, veteran status, gender identity or expression, transgender status, sexual orientation, marital, family or partnership status, political affiliation or activities, military service, domestic violence victim status, sexual or reproductive health decisions, caregiver status, traits historically associated with race, including but not limited to hair texture and protective hairstyles or any other status protected under applicable federal, state and local laws. Brightcore Energy is committed to providing equal employment opportunities to all aspects of employment, including job assignment and compensation. We respect the laws enforced by the EEOC and are dedicated to going above and beyond in fostering diversity across our company. This job description provides a general overview of the expectations and basic duties of the job and is not a comprehensive list of all duties and responsibilities. Brightcore Energy will assign additional duties and tasks that it deems necessary to meet the requirements of the position. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Job Title: Blood Bank Technologist Responsibilities • Perform qualitative and quantitative analysis on all specimens received in the laboratory for the assigned station, with a primary focus on blood bank testing., • Conduct testing in hematology, including urinalysis, coagulation studies, and spinal fluid counts, in accordance with established laboratory protocols., • Apply a thorough understanding of the principles behind all tests performed and maintain working knowledge of all equipment used in the assigned station., • Ensure that all specimens are properly labeled and placed into appropriate storage conditions to maintain specimen integrity., • Follow all quality control policies and procedures to ensure accurate, reliable, and reproducible patient results., • Recognize critical or life-threatening test results, verify their accuracy, and promptly report them to the appropriate clinician or care team., • Accurately document and verify all test results in the Laboratory Information System (LIS) in a timely manner., • Adhere to all laboratory safety policies and regulatory standards while handling specimens, reagents, and equipment., • Participate in ongoing efforts to support the rebuilding and continuous improvement of the laboratory’s operations and services., • Active New York State Clinical Laboratory Technologist license or valid permit issued by the New York State Department of Education for Clinical Laboratory Technology., • Prior blood bank experience in a clinical laboratory setting., • Ability and willingness to work an overnight shift from 12:00 a.m. to 8:00 a.m., including rotating weekends., • Proficiency in performing blood bank testing and related laboratory procedures in accordance with established protocols., • Working knowledge of laboratory equipment and instrumentation used in blood bank, hematology, urinalysis, coagulation, and spinal fluid analysis., • Ability to recognize, verify, and appropriately escalate critical or life-threatening test results., • Strong attention to detail and accuracy in specimen handling, testing, and result documentation in the Laboratory Information System (LIS)., • Commitment to following quality control policies, safety procedures, and regulatory requirements., • ASCP certification is preferred but not required if the candidate holds a full New York State Medical Laboratory Technologist license., • Experience working as a Medical Technologist, Med Tech, or Medical Laboratory Technologist in a hospital or clinical laboratory environment., • Familiarity with clinical laboratory workflows, including blood bank, hematology, and general laboratory operations., • Interest in professional growth and upward mobility within the laboratory setting., • Ability to adapt to a laboratory that is undergoing development and improvement, contributing positively to process enhancements. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Join JB&B and shape the future of the built environment! Founded in 1915, Jaros, Baum & Bolles has been a pillar of engineering innovation in New York City for over a century. Specializing in mechanical, electrical, plumbing (MEP), JB&B has contributed to some of the most iconic buildings. In October 2025, JB&B joined forces with Trinity Consultants, a global consulting firm focused on the natural and built environments. JB&B now operates within Trinity’s Built Environment division, combining its deep expertise in high-performance building systems with Trinity’s strengths in acoustic design, facility operations, commissioning, and technology strategy. This strategic merger expands JB&B’s capabilities and offers employees: * Access to a broader portfolio of international projects and clients * Enhanced career mobility across Trinity’s global network * Interdisciplinary collaboration with experts in sustainability, environmental science, and digital infrastructure About the Role We are seeking a technically skilled and experienced Project Engineer to join our Field department in our New York office. A professional who has developed strong abilities in communication, coordination, project management, and leadership. This role requires an individual who can effectively manage and oversee various aspects of engineering projects, ensuring that all technical requirements and project objectives are met efficiently. Key Responsibilities • Interpret and analyze construction documents and industry standards, • Develop and implement project-specific inspection and test scripts for multidisciplinary systems, • Direct and record equipment and system level testing, documenting discrepancies, • Review and apply local building codes and certification requirements (e.g., LEED, WELL, ASHRAE), • Conduct site surveys, inspections, and gather technical data using various instrument, • Prepare technical field reports, recommendations, and project documentation, • Coordinate on-site activities and project documentation with stakeholders, including clients, construction managers, and vendors, • Participate in client meetings, team functions, and respond to client inquiries, • Manage cloud-based project modules and datasets for complex projects, • Continually improve document templates and procedures; support strategic service sector meetings., • Ensure timely assembly and distribution of project documentation and meet deadlines consistentlyMinimum Qualifications, • Bachelor's degree in Engineering or related discipline from an ABET accredited program, • Minimum 3+ years of relevant experience or Senior Engineer competencies, • Professional certification (e.g., LEED,CCP,CEM), • Knowledge of MEP design software (e.g., Revit, AutoCAD) and building codes, • Experience with project documentation across all deliverable phases Legacy + Innovation: Our company blends a rich history with forward-thinking design, including smart building systems and deep carbon reduction strategies. * Collaborative Culture: With over 400 professionals, our company fosters mentorship, teamwork, and continuous learning. * Global Impact: Now part of Trinity, our company offers opportunities to work on transformative projects across commercial, healthcare, aviation, life sciences, and data center sectors. * Multiple office locations: New York, Boston and Philadelphia. What We Offer * Hybrid workplace offering the flexibility to work both from home and the office * Comprehensive benefits package including 401k employer match and stock options * Paid time off (PTO), volunteer program and employee resource groups * Training and professional development courses through JB&B University Estimated compensation range: $93,000 - $100,000 Jaros, Baum & Bolles is an equal-opportunity employer. All qualified candidates will receive consideration for employment without regard to race, ethnicity, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, marital status, military veteran status, unemployment status, or any other status protected by law. Powered by JazzHR F4HEVl1rMV

Job Description About the Role The Acoustics Department at AKRF is seeking a Senior Acoustical Consultant to be based out of New York City, NY or Mt. Laurel, NJ office. This individual will work with the department to provide noise and vibration analysis and review on a broad range of public and private development projects. The potential candidate will have the opportunity to work in an environment of encouragement and collaboration to help AKRF shape the future of the region. Job Responsibilities: • Supervise, manage, and contribute to noise and vibration impact analyses for environmental review of land development, transportation, energy production/distribution, infrastructure, and other project typologies, • Supervise and conduct noise and/or vibration modeling (CadnaA, TNM, FTA, HUD, etc.), • Direct and conduct noise and vibration field measurements and acoustical testing, • Develop mitigation and noise/vibration control recommendations, • Contribute to and review noise and vibration chapters for CEQR, SEQRA, NEPA and other environmental review documents (e.g., EAS, EIS), • Interact with clients, teaming partners, and review agencies, • Review site plans/architectural drawings, • Assist with HVAC and mechanical noise calculations, vibration isolation recommendations, engineering calculations, • 7-10 years’ experience, • Bachelor’s degree in acoustics, physics, mechanical, electrical or architectural engineering, • Familiarity with NEPA and state-level environmental review, • Project management and client interaction experience, • Preferred experience with CEQR Technical Manual/Noise (E) designations, • Preferred experience with environmental noise and vibration and architectural acoustics, • Ability to manage and meet multiple deadlines, • Strong written and verbal communication skills, • Ability to work both independently and collaboratively Compensation will range from $100k to $120k, and commensurate with experience. Why Work at AKRF Founded in 1981, AKRF is an award-winning consulting firm with 400 planners, engineers, designers, economists, ecologists, geologists, historians, archaeologists, acousticians, and many other types of professionals guided by the belief that to be original is to be transformative. Professionals join and remain at AKRF for our corporate-casual environment that values flexible work schedules and locations, and balances award-winning projects with social impact initiatives, charitable giving, and plenty of fun and games. We foster a diverse, equitable, and inclusive environment where employees are respected and valued in honor of their identities; we strive to deliver on this promise every day. Our cookie exchanges and ice cream socials are quite the treat. What We Offer We provide employees with a benefit package that reflects our respect for your workplace contributions, professional goals, and personal priorities. The benefits program at AKRF includes: • Medical, Dental, Vision insurance, • Vacation and Sick time, • Flexible work schedules and locations, • 401(k) retirement plan with employer matching, • Additional Voluntary Life Insurance, • Short- and Long-Term Disability, • Stock Ownership, • Tuition Reimbursement, • Training and professional development courses, • Opportunities for community outreach through internal networks, • Charitable donation match Applicants should be legally authorized to work in the United States at the time they apply. Please note that AKRF is not able to sponsor employment visas for this position, now or in the future. Any offer of employment will be contingent upon verification of authorization to work in the United States, in accordance with applicable federal, state, and local laws. Equal Opportunity Company AKRF enforces a policy of equal employment opportunity in our daily operations. The firm has a demonstrated history of hiring, training, developing, promoting and retaining minority group members and women. All employment-related decisions are based solely on relevant criteria and without regard to race, color, religion, age, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, sexual identity, caregiver status, military/veteran status or citizenship status, or any other characteristic protected by federal, state, or local law.

Job Description Who We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We are seeking an energetic, registered architect/licensed civil/structural engineer with strong experience in building façade projects, FISP inspections and familiarity in handling building façade projects in New York city area. The Senior Facade Architect/Engineer is responsible for leading and managing building façade architectural and engineering projects, overseeing design development, providing technical expertise, and ensuring the successful delivery of projects within scope, budget and timeline. Responsibilities and Duties: • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct and coordinate on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Coordinates the recording of accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand and review investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicate the feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry., • Performs other duties as related to the position as assigned by the firm, demonstrating flexibility and adaptability to contributing to the overall success of the team. Special Requirements Technical • Provide technical guidance and expertise to the team throughout the design and construction phases, ensuring compliance with relevant regulations, codes and standards., • Performs and coordinate design, calculations and drawings., • Performs peer review of other technical data prepared by internal Engineers/Architects as well as third party entities., • Perform and coordinate forensic inspections, applying technical expertise to assess project conditions and identify potential issues or deficiencies., • Able to serve as an expert witness and depositions, mediations, or litigation., • Conducts a wide range of testing, including but not limited to material testing, structural analysis and performance evaluations. Supervises testing activities and ensures accurate data collection for accurate interpretation of results., • Generate comprehensive field reports detailing observations, measurements, and findings from site visits and inspections., • Generate expert reports that provide in-depth analysis, conclusions, and recommendations based on project requirements and findings., • Collaborate with cross-functional teams, including clients, contractors and consultants to coordinate project activities and resolve technical issues., • Collaborate with legal teams and represent the firm in mediations, providing expert opinions and strategic guidance., • Participate in meetings with clients and stakeholders to understand project objectives, present design proposals, and provide technical recommendations., • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timeline to ensure project success. Education • Professional Engineer or Registered Architect license required., • Maintain compliance with licensing requirements and applicable regulations., • OSHA-10 Certification, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, standards and familiarity with FISP inspections and local law regulations on inspections., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed. Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%). Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR vNQ6EEkP4a

Job Description For immediate consideration, book a meeting with me using this link!! Engineering Technician (Cleanroom | CWW Nights) Location: Fairfield County, CT Schedule: Compressed Work Week (CWW) – Nights Shift Differential: +15% Night Shift Premium + Daily OT (12-hour shifts) Position Overview We are hiring an Engineering Technician to support the build, test, and continuous improvement of complex mechanical and electrical systems in a cleanroom manufacturing environment. This role is ideal for a hands-on technician with a strong foundation in assembly, testing, blueprint reading, and lean manufacturing, who is eager to grow into an engineering-focused career path within the semiconductor industry. You will play a critical role in production execution, quality improvement, launch of new products, and process optimization, working closely with engineering, manufacturing, and quality teams. Key Responsibilities Quality & Continuous Improvement • Build products in accordance with established specifications and procedures., • Identify, document, and report recurring assembly or functional issues., • Support troubleshooting, root-cause analysis, and corrective actions., • Contribute to Kaizen, Lean, and process improvement initiatives., • Assemble, integrate, and test highly complex mechanical and electrical systems., • Own the full build process from assembly through final testing., • Resolve technical issues that arise during manufacturing and test., • Serve as a technical reference point and set an example for other technicians., • Actively participate in pilot builds and the transition to volume production., • Develop and improve technical product documentation (TPD), processes, and records., • Evaluate the production impact of new procedures prior to implementation., • Develop deep knowledge of products, sub-modules, and full system integration., • Understand system-level interactions and downstream impacts., • Share technical knowledge and best practices with peers., • Coordinate daily activities according to the production plan., • Monitor workflow execution and adjust based on real-time production needs., • Blueprint and schematic reading, • Mechanical and electrical assembly, • Testing, troubleshooting, and analysis, • Lean manufacturing principles and process improvement, • Prototype builds and validation testing, • Strong hand tool proficiency, • Engineering or technical manufacturing understanding, • Cleanroom experience, • Electronics and electrical troubleshooting, • Use of test equipment and diagnostic tools, • Inspection, repair, and rework, • Strong computer and documentation skills, • Diploma, Certification, Associate’s, or Bachelor’s Degree preferred, • (Engineering, Engineering Technology, Chemical, or related discipline), • Equivalent hands-on manufacturing or technical experience will be considered., • Manufacturing internship or co-op experience is a plus., • Cleanroom manufacturing environment, • Standing, detailed assembly, and testing work, • Initial training will occur on 2nd or 3rd shift for approximately 4–6 weeks, • All shifts are 12 hours: 6:00 PM – 6:00 AM - Includes 15% night shift differential + daily overtime, • CWW Nights – N1 Shift, • Week 1, • Sunday: 6:00 PM – 6:00 AM, Monday: 6:00 PM – 6:00 AM, Tuesday: 6:00 PM – 6:00 AM, • Week 2, • Sunday: 6:00 PM – 6:00 AM, Monday: 6:00 PM – 6:00 AM, Tuesday: 6:00 PM – 6:00 AM, Wednesday: 6:00 PM – 6:00 AM (every other Wednesday), • CWW Nights – N2 Shift, • Week 1, • Wednesday: 6:00 PM – 6:00 AM, Thursday: 6:00 PM – 6:00 AM, Friday: 6:00 PM – 6:00 AM, Saturday: 6:00 PM – 6:00 AM, • Week 2, • Opportunity to join one of the top employers in Connecticut, • Exposure to cutting-edge semiconductor manufacturing, • Strong potential for conversion to a full-time role after 12 months, • Clear growth path into engineering-focused positions Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. Job Description As a Structural Engineer you will be responsible for providing support to the Managers and taking an active part in conducting on-site inspections to identify deficiencies, as well as ensure compliance with project plans, specifications, and industry standards. Your primary focus will be delivering exceptional project outcomes while maintaining effective communication with internal teams, clients, and contractors. DUTIES & RESPONSIBILITES: Essential Functions for All Technical Positions • Assist with Coordinating and managing internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Assist with and verifies schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conducts on-site inspections, documenting existing conditions and potential deficiencies, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Recording accurate field measurements and performs calculations throughout the duration of the project., • Assists with preparing written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Basic understanding of investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status with team and proactively escalates any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.), • Basic understanding of Construction Plans, Specifications, and construction manuals., • Produces inspection field reports for clients, by thoroughly reviewing site observations, reporting findings and providing recommendations based upon professional judgement, while applying relevant codes and standards., • Assist in reviewing and evaluating change orders, assessing their impact on the project scope, schedule and budget and providing recommendations to the team lead/ senior management. SUPERVISORY RESPONSIBILITIES: Education • Bachelor’s degree from a four-year college or university in Engineering, Construction Management, or relevant work experience. Work Experience, • In lieu of education, a minimum of two years of experience in an engineering consulting firm or construction-related field. Licenses & Certifications, • For degree holders: Engineering Intern or Engineering in Training Certification preferred., • OSHA-10 Certification, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed. PHYSICAL DEMANDS: Lifting • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Extended periods of standing and walking, possibly on uneven or challenging terrains. Flexibility in Scheduling Equal Opportunity Employer/ Veterans/ Disabled Powered by JazzHR XnncUDlhZu

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated test engineers to join its rapidly growing team. The test engineering roles will design, commission, and operate test facilities for high temperature superconducting (“HTS”) tapes, current leads, and magnets. HTS magnets and power distribution are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, commission, and operate test and measurement systems and facilities, • Develop specifications for the testing of HTS tapes, current leads, and magnets, • Develop and execute test processes and procedures, • Develop and integrate cryogenic, vacuum, and Instrumentation & Control systems, • Develop data analysis software and algorithms using Python or similar, • Provide integration and test support for—and occasionally develop—LabVIEW software, • Collaborate with vendors to procure measurement and test equipment, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience designing or testing superconductors, magnets, cryogenics, or vacuum systems, • Experience designing or testing high-pressure or cryogenic fluid networks, • Experience using CAD software (e.g. SOLIDWORKS, CATIA, NX, etc.)Experience specifying and implementing precision instrumentation and data acquisition systems, • Experience operating or developing LabVIEW-based test facilities, • Experience writing and executing test plans, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in electrical engineering, mechanical engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description For those who’d rather be on the move than behind a desk. We’re opening our 2026 hiring pipeline now for curious, adaptable problem-solvers who love travel, hands-on work, and being part of a team that actually knows your name. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit. We believe in transparency. Our four-week paid training is designed to prepare technically skilled individuals for the field. Success in training requires a basic foundation in electrical systems, programming, and communication networking. If you’re new to these areas, this role may not yet be the right fit. Why You’ll Love Working With Us Work + Travel, Combined. You’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. There is no office to report to, and you’ll be away from home while you’re working. Fair Pay That Grows With You. Starting salary $60,000–$75,000, depending on location, education, and experience. You’ll also receive per diem for meals, mileage reimbursement, utilization bonuses, weekend bonuses and more. We don’t have endless budgets, but we do have trust, teamwork, and appreciation of knowing every person by name. Room to Grow. We invest in your development through paid training, annual merit raises, and a 5% salary increase after six months. Learn, advance, and build a career that can take you in multiple directions. We will be your biggest cheerleaders of growth, even if you’re not with ProAutomated forever. Real Benefits + Real Flexibility. Health, dental, and life insurance, a matching 401(k), short & long term disability options, paid vacation, and flexible time off after 18 months. We take care of you, on and off the job. A Team That Gives You Community. We’re a smaller, people-first company where teamwork, adaptability, and humor are part of the job. All of our leaders have grown into their positions at ProAutomated, so your manager has done what they’re asking you to do. We hold each other to high standards, accept none of us are perfect, and push for excellence. You’ll be surrounded by people who have your back. What You’ll Do You’ll be part of the team that keeps automation projects moving. At ProAutomated, we don’t install systems, we partner with system integrators and manufacturers to ensure everything works flawlessly when it matters most. • Support data center startups, performing on-site mechanical, electrical, and control checks., • Lead startup, checkout, and acceptance testing for warehouse fulfillment and manufacturing systems in industries like food and beverage., • Partner with automation and controls engineers to test, troubleshoot, and validate their systems on-site., • Provide clear communication and updates to customers and project teams to keep progress smooth and accurate., • Typical travel rotations follow a days on & off schedule: 5 on - 2 off, 10 on – 4 off, or 14 on – 7 off. Every project brings new challenges and new locations., • Work with various customers, getting invaluable real world experience with massive companies, but with the ProAutomated team supporting you.What We’re Looking For, • A genuine love of travel, expect to be away from home on rotation (we’ll handle the logistics)., • Preferred experience: have a working knowledge of electrical systems, programming, and communication networking skills., • Adaptability and grit, you thrive when plans change and challenges pop up., • Strong communication and problem-solving skills., • Must live within 50 miles of a major airport (relocation assistance available)., • Personal vehicle within 45 days of employment (for local projects)., • Authorized to work in the U.S., • A technical degree or equivalent hands-on experience (3+ years) in a related field such as electrical, mechanical, or automation engineering. Physical Requirements The below physical requirements are considered essential functions of the role. • Ability to walk long distances across large facilities or job sites as part of daily work activities., • Climb ladders, stairs, or work at heights., • Lift, carry, and move up to 50 lbs., • Stand, kneel, or reach for extended periods Apply now to get on our radar for early 2026 hiring. Principals only — recruiters, please do not contact. ProAutomated is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment where all team members feel respected and supported. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other protected status. Powered by JazzHR GWCtqYw0K1

Job DescriptionRole: Practice Lead & Physical Security Architect Duration: 90 day remote contract Location: Remote work from home with 20% travel Role OverviewArganteal is seeking a Physical Security Architect & Practice Lead for a 90 day contract to serve as a trusted strategic advisor and technical authority embedded with a premier global financial services client with a significant consumer banking footprint. This individual will function as the client’s principal technical partner—a right-hand resource to their physical security leadership—providing end-to-end architectural guidance across branch security technologies, surveillance infrastructure, and the underlying physical-layer networks that support them. The ideal candidate brings deep, hands-on expertise in enterprise-grade physical security systems deployed at scale across a geographically dispersed branch banking environment. This is a high-visibility, high-trust engagement requiring a practitioner who can operate with autonomy, navigate complex stakeholder landscapes, and drive both tactical execution and long-range technology roadmap development. Key ResponsibilitiesStrategic Advisory & Practice Leadership • Serve as the primary physical security architecture advisor to the client’s security leadership, functioning as a day-to-day strategic and technical partner across all branch security technology initiatives., • Develop and maintain a comprehensive physical security technology roadmap aligned with the client’s enterprise security strategy, regulatory obligations, and branch expansion or consolidation plans., • Lead practice-level activities including standards development, reference architecture creation, technology evaluation, and vendor assessment for physical security platforms and components., • Provide executive-level briefings, technical recommendations, and decision-support documentation to senior client stakeholders, including CISO and corporate security leadership.Branch Security Technology Architecture, • Architect, design, and provide technical oversight for branch surveillance systems including IP and analog camera systems, Digital Video Recorders (DVR), and Mobile Video Recorders (MVR)., • Define standards for camera placement, coverage mapping, resolution requirements, retention policies, and recording schedules across diverse branch typologies (full-service, drive-through, in-store, and standalone)., • Evaluate, recommend, and architect Video Management System (VMS) platforms, ensuring interoperability with existing enterprise security operations center (SOC) workflows and incident management processes., • Provide technical direction on emerging branch security technologies including video analytics, AI-driven threat detection, access control integration, and cloud-based surveillance platforms.Layer 1 Physical Network Infrastructure, • Provide expert-level guidance on Layer 1 wiring infrastructure supporting physical security networks, including specification, design, and modification of coaxial cable runs (RG-59, RG-6, and Siamese configurations)., • Define and enforce standards for proper electrical grounding and bonding of physical security systems in compliance with NEC, TIA/EIA, and client-specific requirements., • Spec, review, and approve cable pathway designs, termination standards, and signal integrity requirements for both new branch buildouts and retrofit/upgrade projects., • Collaborate with low-voltage contractors, general contractors, and client facilities teams to ensure Layer 1 installations meet architectural specifications and pass quality assurance inspections., • Troubleshoot and resolve signal degradation, grounding faults, and cable plant issues impacting surveillance system performance., • Provide supplemental Layer 2/Layer 3 network support for physical security systems as needed, including familiarity with VLANs, Power over Ethernet (PoE), and TCP/IP fundamentals as they relate to IP-based surveillance infrastructure.Team Leadership & Talent Development, • Manage, develop, and mentor a team of field service technicians, engineers, and supervisors supporting physical security operations across the client’s branch environment., • Conduct performance reviews, establish individual development plans, and deliver ongoing training programs to ensure technical staff maintain required certifications and competencies., • Lead recruiting, hiring, and onboarding efforts for technical staff as the practice scales to meet evolving client demand., • Foster a culture of accountability, continuous improvement, and technical excellence within the physical security practice.Operational Support, • May periodically oversee day-to-day operational activities including troubleshooting, maintenance coordination, and repair workflows for physical security systems as business needs require., • May support dispatching and scheduling of service technicians from time to time, particularly during peak deployment periods, system upgrades, or incident response scenarios., • Ensure compliance with company safety standards and established service procedures when engaged in operational oversight activities.Client Escalation & Relationship Management, • Serve as the primary escalation point for physical security–related service issues, ensuring timely resolution and clear communication with client stakeholders., • Monitor and ensure adherence to service level agreements (SLAs) specific to physical security system uptime, maintenance response, and incident resolution., • Maintain strong, trust-based relationships with key client contacts across corporate security, facilities, and branch operations leadership.Engagement Delivery & Collaboration, • Coordinate with internal teams including account leadership, project management, engineering, and supply chain to ensure seamless delivery of physical security solutions., • Produce and maintain detailed technical documentation including as-built diagrams, system architecture drawings, bill of materials, and standards guides., • Participate in site surveys, branch assessments, and periodic on-site reviews as part of the travel expectation (up to 20%). QualificationsRequired, • Minimum of 10 years of progressive experience in physical security technology architecture, design, and implementation within large-scale enterprise environments., • Demonstrated experience with enterprise surveillance systems including IP and analog cameras, DVR, NVR, and MVR technologies., • Hands-on expertise with Layer 1 wiring for physical security networks, including coaxial cable specification (RG-59, RG-6, Siamese), termination, testing, and modification of cable runs., • Strong working knowledge of proper electrical grounding and bonding practices for security infrastructure per NEC and TIA/EIA standards., • Experience with Video Management System (VMS) and integrated security platforms such as Genetec, Milestone, Avigilon, Honeywell, LenelS2, or Bosch., • Hands-on experience with access control systems, intrusion detection systems, and alarm monitoring platforms within enterprise environments., • Demonstrated ability to serve as a trusted advisor to senior client stakeholders in a consulting or staff augmentation capacity., • Bachelor’s degree in business, electronics, engineering, or a related field, or equivalent professional experience., • Must be a United States citizen currently residing on U.S. soil., • Ability to travel up to 20% domestically.Preferred, • Experience in the financial services or consumer banking industry, with specific knowledge of branch security requirements, regulatory considerations, and compliance frameworks (e.g., FFIEC, OCC guidance)., • Professional certifications such as PSP (Physical Security Professional), CPP (Certified Protection Professional), BICSI RCDD, or equivalent industry credentials., • Experience with structured cabling design and low-voltage systems beyond coaxial, including Cat6/6A for IP-based surveillance convergence., • Prior practice leadership or team lead experience in a professional services, consulting, or managed services context., • Knowledge of cloud-based and hybrid surveillance architectures, edge computing for video analytics, and bandwidth optimization strategies for distributed branch environments. Work Environment & Requirements, • This position is fully remote, open to candidates located anywhere within the United States., • Candidate must be a U.S. citizen physically located on U.S. soil at all times during employment., • Travel of up to 20% is expected, primarily for client site visits, branch assessments, and periodic in-person stakeholder engagements., • Standard working hours with flexibility to accommodate client time zones and periodic after-hours coordination as needed. Powered by JazzHR 7YptZVFDD0

Job DescriptionJob Description Electronics Technician 100% Travel | United States | Full-Time Position Overview Crown is seeking a highly motivated and skilled Electronics Installation/Disposition Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries. This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, network, and supporting systems. The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field. Key Responsibilities Electronic System Installation & Integration • Install, configure, align, test, FAA related equipment to include but not to be limited to communication systems, voice control system, and systems as assigned, • Setup and support electronic/networking equipment, • Connect and integrate Telco requirements including Commercial Telco, Field Cable, Fiber Optics, and VOIP communications, • Install new radio racks, radios, and other Government/Vendor Furnished Equipment, • Remove and properly dispose of legacy communications equipment, and create dispensation documentation, • Perform baseline electronic readings and generate required documentation to satisfy customer/FAA requirements, • Perform electronics testing procedures and coordinate frequency outages Infrastructure & Physical Buildout • Mount and install antennas, • Run and terminate coaxial cables and other communication cabling, • Install and test grounding systems and implement surge protection measures, • Perform basic electrical wiring and connections, • Install and assemble equipment racks, cable trays, and electrical conduit, • Ensure proper infrastructure to support the communication system Engineering, Compliance & FAA Interface • Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams, • Follow provided engineering packages and participate in required field modifications, • Participate in pre-installation meetings, • Interface with FAA Air Traffic and Technical Operations during installations, • Work confidently in geographically isolated environments and create solutions to unique on-site challenges, • Provide guidance and support to other installation and construction crew members, • Communicate effectively with team members, management, and stakeholders, • Understand the practical implications of electrical and electronic circuitry Required Technical Experience • Demonstrated experience installing and maintaining electronic communication and networking equipment, • Familiarity with FAA National Airspace (NAS) communications and networking systems, cabling, and equipment, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel) Minimum Required Qualifications • Must be a U.S. Citizen, • Must possess a valid driver’s license, • Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system, • Must be able to obtain a federal background screening security, • Ability to generate required documentation, • Understanding of Telco and networking equipment including Commercial Telco, RCL, Field Cable, VOIP, and Fiber Optics Physical & Work Environment Requirements • Ability to stand, sit, crouch, and work in one position for extended periods, • Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack, • Ability to climb and work at heights exceeding 60 feet, • Ability to occasionally perform work under severe time restraints, • Must be in good physical condition and able to pass a physical fitness assessment if required Schedule & Travel Typical schedule is Monday through Friday Must be able to work non-standard hours depending on site requirements. This is a 100% travel position. Compensation Hourly Rate Range: $20.00 to $49.00 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • 401K with company match, • Comprehensive medical, dental, and vision plans, • Generous PTO About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC area. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Cresilon® is a Brooklyn-based biotechnology company that develops, manufactures, and markets hemostatic medical devices utilizing the company’s proprietary hydrogel technology. The company’s plant-based technology has revolutionized the current standard by stopping traumatic and surgical bleeds in seconds without the need for extended manual pressure. The company's current and future product lines target veterinary, human trauma, and human surgical applications. Cresilon's mission is to save lives. Learn more about the company at . Description: The R&D Engineer I/II is responsible for supporting product design and process development activities while ensuring compliance with all quality and regulatory requirements. The position has a scientific focus that includes implementation of formulation development through process development, prototype fabrication, and characterization, along with additional process evaluation and data generation through designed experiments. Process development in an R&D environment will be followed by qualification and technology transfer into manufacturing. Collaboration is a key aspect of this role, as the engineer will work within a multidisciplinary team of researchers and engineers. The position offers diverse opportunities in a collaborative cross-functional environment, requiring adaptability, flexibility, and a willingness to learn and innovate in the exploration of new technologies, new approaches, and techniques in pursuit of product/process robustness and innovation. The R&D Engineer I/II is expected to possess expertise in areas including, but not restricted to, polymer, chemical, material science, and process development and engineering. Additionally, they will assist in generating documentation essential for regulatory submissions, ongoing publication initiatives, and direct communication with the Head of Research regarding various tasks. This is a full-time, on-site position, located in Brooklyn, New York. This role is an independent contributor role (i.e. no direct reports). Level is dependent on experience. Responsibilities: • Oversee the planning, implementation, and analysis of experiments relevant to project objectives. Ensure the application of established scientific and engineering principles to solve complex problems and challenges innovatively and efficiently, adhering to rigorous scientific methodologies and protocols., • Create and execute product/process enhancement, and new product/process development plans., • Lead material/design/process changes and their implementation with well-documented research/analyses. Process and analyze results,, • Author protocols and reports including engineering studies and design verification/validation activities., • Aid in the development and execution of testing methods to aid in exploratory research, product/process development, and quality control; conduct chemical and mechanical property evaluation tests to assess the desirability of process or formulation changes., • Prepare samples as required for manufacturing, testing, or other evaluations and data analysis., • Participate in voice-of-customer (VOC) labs and other user needs assessments., • Interface with external vendors, customers, and suppliers. Specify equipment and process requirements for developing and implementing new products, product improvement and new equipment/processes., • Support process and product transfers to manufacturing or CDMOs., • Maintain a laboratory notebook and other technical documentation according to required GLP/GMP guidelines., • Understand and prioritize process improvements, design experiments to make those improvements, and execute these plans in the laboratory., • Maintain active dialogue with Regulatory Affairs as subject matter expert on all product design elements/documentation about research towards FDA/regulated authority submissions., • Provide support to the marketing and sales team, with the development of presentations, sales tools, and application data., • Work with company leadership to evaluate existing research practices and contribute to a culture of ethical, high-quality research operations within the organization. Required Qualifications • Education: BS in Chemical Engineering, Polymer Engineering, Material Science & Engineering, or related engineering discipline., • Minimum 4+ years previous experience in an industrial environment with a BS degree. (2 years minimum experience if advanced degrees)., • Proficiency as an adept experimentalist with hands-on experience in the product and process development of polymeric materials and their characterization in an R&D or manufacturing environment., • Mathematically inclined with strong analytical and problem-solving skills with the ability to be observant and to think creatively. Demonstrated ability to design experiments and analyze data with the use of appropriate quality and statistical methodologies. Demonstrated ability to work independently as well as be a strong team contributor. Ability to effectively work within a team and cross-functionally to expedite the completion of critical project tasks., • Requires understanding of product/process design and engineering. Experience should include process development/validation and/or transfer/verification, protocols, and troubleshooting skills., • Ability to handle multiple project assignments of medium scope and complexity and able to prioritize and complete work with a sense of urgency on time., • Ability to lead directly and by influence, including strong problem-solving, conflict resolution, and analytical skills., • Working knowledge of Good Documentation Practices (GDP) and Good Manufacturing Practices (cGMP) requirements., • Proficiency in the use of Microsoft Office, Microsoft Excel, Microsoft Word, Microsoft PowerPoint is required., • Requires excellent written and verbal communication and presentation skills., • Legal authorization to work in the United States is required., • Physical Requirements include:, • Aseptic Gowning Qualification: Able to be successfully qualified for aseptic gowning, including successful respirator training., • Wear Appropriate Personal Protective Equipment (PPE):, • Be able to stand and walk for prolonged periods, with the ability to climb, balance, stoop, bend, reach, and handle equipment., • Ability to speak, listen, and understand verbal and written communication., • Possesses hand-eye coordination and manual dexterity for delicate manipulations., • Ability to lift up to 50 pounds occasionally and to carry, push, pull, or otherwise move objects., • Visual acuity is required for performing close and distant activities. Preferred Qualifications • An advanced technical degree (MS or PhD)., • ·Lab experience in an industry setting within cGMP-regulated environments., • Prior experience developing processes and scaling these up into manufacturing or CDMO, • Mechanical/electrical knowledge with the ability to troubleshoot processing equipment, • Six Sigma green belt or black belt certification preferred., • Experience implementing process and quality improvements in a manufacturing environment, • Work experience with the medical device or pharmaceutical industries, • Working knowledge of ISO 9001, ISO 13485:2003 and ISO 14971:200., • Working knowledge of FDA requirements as per 21 CFR 820. Cresilon is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. Cresilon makes hiring decisions based solely on qualifications, merit, and business needs at the time. Benefits • Competitive annual base salary range of $70,000 - $120,000, depending upon job level and qualifications, • Paid Vacation, Sick, & Holidays, • Monthly MetroCard Reimbursement, • 401(k) & Roth Retirement Savings Plan with company match up to 5%, • Work/Life Employee Assistance Program, • Company Paid Life and Short-Term Disability Coverage, • Medical, Dental, and Vision Insurance, FSA: Dependent & Healthcare, Commuter & Parking Benefits, Long Term Disability Coverage

Job Description Yorktel is always seeking new talent to join our team. Therefore, we are advertising some key positions within the company where we can collect and store potential candidates. By submitting your Resume for this specific posting, you agree to have your details kept on file and to be contacted as and when open positions become available. Please ensure your Resume has your most recent experience and up to date contact details. If you do not hear from us, it is because we are not currently recruiting for this position. York Telecom provides state-of-the-art audio-visual collaboration solutions to major government and commercial clients. Offering turn-key managed solutions, York Telecom has a proven track record of success in delivering technology and services such as video conferencing, campus video distribution, distance learning applications, television broadcast facilities, broadcast automation, online interactive multimedia video, network infrastructure, video call management, 24 x 7 maintenance and help desk support. Yorktel is currently seeking a Sr. Field Engineer who is focused on a fast-paced high-volume production and engineering department and staff. The Sr. Field Engineer is also responsible for meeting project commitments (both financial and non-financial) and the overall service of external customers. Responsibilities include but are not limited to strategic or operational planning within the field engineering departments, monitoring the performance of active projects, financial analysis to include job cost monitoring and reporting, staff training, adherence to standard operating practice and processes. Duties and responsibilities: This position regularly works in a team of individuals with varying degrees of expertise and influences internal and external customers to achieve a mutually desirable outcome. This position will trouble shoot issues, make recommendations to internal parties and customers in regard to concerns or issues, and ensure resolution of any problems working closely in conjunction with assigned team. This position must regularly communicate answers to complex questions and respond to detailed inquiries about technical issues and how to resolve these issues. This position handles and is expected to protect all internal and external confidential information and must utilize discretion and judgment based on company policies and procedures. • Provide technical support to the sales team in a comprehensive, thorough, detailed and time sensitive manner., • Intensive interface with clients and job sites to document customer requirements and job site conditions., • Provide and document customer design based on the client requirements and job site conditions., • Work directly with clients, architects, consultants and staff throughout the design development and delivery process with the support of the Supervisor., • Develop Statement of Work for each job based on system design and customer requirements., • Develop system design drawings including, but not limited to, audiovisual system diagrams, drawings and sketches; Design/Build and Bid/Build specifications; and operational capabilities narratives, etc., • Develop accurate job cost estimates for each job., • Provide technical response to the customer RFP/RFQ/RFI., • Be capable of working effectively and efficiently with support from other members of the engineering team., • Maintain complete and accurate project documentation and records., • Communicate effectively with internal staff, client representatives, cooperative trades and subcontractors., • Effectively coordinate and manage multiple system design projects., • Be responsible for successfully completing assignments on time and within budget., • Develop and conform to company technical standards and practices. Correctly interpret multiple formats of technical specifications; schematic drawings and architectural diagrams., • Knowledge of and adherence to York-VCA policies and procedures., • Create Scope of Work documents to reflect solution descriptions, capabilities, and limitations, • Present technical solutions to executive-level audiences at partner and client organizations, • Maintain ongoing knowledge of York-VCA processes and procedures as well as individual customer process’ and procedures, • Participate in transition activities to permit effective information transfer from pre-sales to implementation teams, • Create test plans for testing solutions in York-VCA and customer labs, • Perform testing in York-VCA and customer labs emulating live world environments, • Analyze customer networks to discern visual communications requirements, • Research technical issues involving the network and visual communications equipment, • Provide support for ad hoc and one-of-a-kind projects, • Work with manufacturers and vendors on current and future technologies and products to be able to select applicable technologies and products to present to clients., • Polycom/Tandberg/Cisco certified Videoconference Engineer (TCE/CVE/etc) certification desirable, • InfoComm CTS certification with Advanced CTS-D certification desirable, • Willingness to pursue and attend additional training related to performance of job., • Proficient in the use of computers and MS Suite (Outlook, Project, Excel and Word), • Polycom CVE certification preferred, • Proficiency in video network infrastructure commissioning and support processes, • Knowledge of video and audio-conferencing service standards, • Demonstrated or potential proficiency in the use of AutoCAD or Visio, or similar proficiency in the use of other diagrammatic software tools, • Knowledge of audiovisual, videoconferencing and IT products and applications, • High levels of Professionalism and Integrity, • High ability to work with peers, • Exceptional customer service skills, • Exceptional written, verbal, and interpersonal skills., • Excellent problem-solving skills, • Always maintain a professional attitude and appearance, • Extensive use of business computer systems including Microsoft Office applications such as MS Word, Excel, Outlook, and MS Project., • Domestic travel requiring multi-night stays within and at times outside the local work area, • Valid passport; International travel possible, • Valid U.S. driver’s license, • If permissible by applicable law, may be required as a condition of employment to complete a background check and/or drug test if required by law or by current or future contracts/clients/vendors, etc., • Education:, • A Senior Field Engineer in this role may have a degree in a related field such as audio engineering, electrical engineering, or computer science. A technical degree may not be required, but having one can be beneficial as it demonstrates a strong foundation in technical skills and knowledge. Additionally, certifications in specific AV systems, such as Crestron or AMX, can also be helpful., • Experience:, • A Senior Field Engineer in this role should have several years of experience working with audiovisual equipment and systems. They should have a thorough understanding of various AV systems, including design, installation, and troubleshooting. They should have experience leading a team of technicians and managing projects, including creating project timelines and budgets., • They should also have excellent communication skills and the ability to work well with clients to understand their needs and provide solutions., • Ability to lift and carry objects up to 50 lbs., • Frequent sitting, standing, and walking We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities and veterans to apply to all of our job openings. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, Genetic information and testing, family and medical leave, sexual orientation and gender identity or expression, protected veteran status, or any other characteristics protected by law. We prohibit retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination.

Job Description About Voyant Voyant Photonics, based in the heart of New York City, is transforming machine perception with a new class of LiDAR devices that are compact enough to fit in the palm of your hand and powerful enough to measure range, velocity, and reflectivity with unparalleled accuracy. By leveraging cutting-edge silicon photonic chips smaller than your fingertip, we deliver sensors that are not only revolutionary in performance but also affordable enough to integrate into any system. Our technology disrupts the status quo of bulky, expensive, and power-hungry LiDAR systems, making high-precision sensing accessible for widespread adoption in robotics, autonomous vehicles, drones, industrial automation, and beyond. Why Join us? At Voyant, you’ll be part of a team turning cutting-edge research into real-world products. As a growing startup, we offer interns the chance to make a meaningful impact, work closely with senior engineers, and learn what it takes to build disruptive sensing technology. This is more than an internship — it’s a chance to grow your technical skills and career in one of the most exciting fields of hardware innovation. Plus, we love to grow our team from within, and great interns often become great full-time teammates—we’re always excited to make that happen. Position Overview We are seeking a motivated and hands-on LiDAR Test Engineering Intern to join our team and directly contribute to the development of our next-generation LiDAR modules. This is a unique opportunity to gain real-world experience in a fast-growing startup, working with disruptive sensing technology at the intersection of photonics, hardware, and software integration. As an intern, you will take on a highly cross-disciplinary, hands-on role. Your primary project will involve designing and building a complete module test fixture—from electrical and mechanical design to data collection and analysis. This internship is an excellent opportunity to apply engineering fundamentals while collaborating across teams in a fast-paced environment. To be successful, you should highlight on your resume a project you’ve built that combines electrical, mechanical, and software/firmware elements. During the interview process, we will ask you to walk us through your design choices, trade-offs, and problem-solving approach. We are looking for resourceful, curious, and driven engineers who thrive on building and testing real systems. Location: NYC Responsibilities: * Design & Build Test Fixture * Select and integrate electrical and mechanical connectors for module interface * Design and layout a custom PCB for testing functionality and signal access * Develop a mechanical enclosure for the test fixture ensuring ease of use and robustness * Test Automation & Data Handling * Write scripts to automate test execution and collect module performance data * Implement data storage and logging infrastructure for traceability * Perform initial data analysis (e.g., signal integrity, power, thermal, or optical performance) and summarize results for the engineering team * Collaboration & Reporting * Work with hardware, photonics, and systems engineers to ensure fixture validity and coverage * Document test plans, fixture schematics, and software in a reproducible, maintainable format * Present findings and recommendations to the team in a clear and structured manner Qualifications * Currently pursuing a BS or MS in Electrical Engineering, Mechanical Engineering, Computer Engineering, or a related field * Coursework or project experience in PCB design, mechanical CAD, or test fixture development * Familiarity with scripting languages such as Python or MATLAB for data collection and analysis * Comfort with basic lab equipment (oscilloscopes, power supplies, multimeters, etc.) * Strong problem-solving skills and eagerness to work hands-on in a lab environment Preferred Qualification: * Experience with test automation frameworks (e.g., PyVISA, LabVIEW, or custom Python libraries) * Exposure to signal integrity, optics, or sensor systems * Previous internship or project work involving both mechanical and electrical design * Strong written documentation and data analysis skills What We Offer * Team events and company meetups * Complimentary lunch provided daily at our NYC office * Opportunity to contribute directly to the development of next-generation LiDAR products * Mentorship from senior hardware, photonics, and systems engineers * Hands-on experience with PCB design, mechanical prototyping, and test automation * Competitive compensation and potential for conversion to full-time Equal Opportunity Employer Voyant Photonics is an equal opportunity employer committed to building a diverse and inclusive workplace. We welcome applicants from all backgrounds and do not discriminate based on race, color, religion, gender, gender identity or expression, sexual orientation, pregnancy, marital or partnership status, age, national origin, citizenship, veteran or military status, disability, medical condition, genetic information, caregiver status, or any other characteristic protected by law.