Electrical testing jobs in Clifton, New JerseyCreate job alerts

Key Responsibilities: Climb towers (up to 500 ft or more) to install, inspect, and maintain wireless equipment. Install and secure antennas, coaxial cables, fiber lines, connectors, mounts, and grounding systems. Perform sweep and PIM testing (if trained) and basic troubleshooting of equipment. Assist with tower structural modifications, antenna alignment, and weatherproofing. Load/unload materials and rig equipment for tower lifts. Use hand tools, power tools, and test equipment safely and effectively. Follow detailed construction drawings, scopes of work, and RF design plans. Ensure all work is performed safely, with high quality and attention to detail. Maintain accurate daily field reports, timesheets, and photo documentation. Assist with on-the-ground civil or electrical tasks when not climbing. Participate in job site safety briefings and follow all OSHA and company safety standards. Requirements: Education & Experience: High school diploma or GED (required). 1 3 years of experience as a Tower Technician or equivalent climbing experience. Proven tower climbing experience (required). Experience with LTE, 5G, small cell, DAS, or microwave systems is a plus. Skills & Competencies: Ability to climb and work at heights for extended periods. Knowledge of tower rigging, safety procedures, and fall protection. Familiarity with installation and testing tools (Anritsu, Site Master, fiber testers, etc.). Strong teamwork, communication, and problem-solving skills. Ability to read and interpret construction documents and RF plans. Certifications (Required or Preferred): ComTrain or equivalent tower climbing certification (required). OSHA 10 or 30 Construction Certification. RF Awareness Certification. First Aid/CPR. Competent Rigger and Rescue Training (preferred). Valid driver's license with clean driving record (CDL is a plus). Working Conditions: Must be able to climb towers 100 500+ feet frequently. Outdoor work in all weather conditions. Extended travel and overnight stays often required. Must be able to lift 50 75 lbs, bend, reach, and work in physically demanding conditions. May require hearing protection.

Job DescriptionBenefits: • Company car, • Competitive salary, • Dental insurance, • Employee discounts, • Free uniforms, • Health insurance, • Paid time off Our team members have the opportunity to earn the top pay in the area, as well as paid on-the-job training throughout the year. The ideal candidate must be a team player but also be able to work independently. This position requires a friendly and positive attitude toward our customers and co-workers. Benefits: • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • Paid Training, • Company van, • Company iPad, • A path to build the life-long career, • Year-round work 2-3 year minimum experience needed as HVAC installer Requirements: • Must have a current driver's license., • Must be able to pass a background check., • Must be able to pass Pre and Post employment drug screenings., • Diagnoses HVAC, refrigeration and/or electrical system through observation, testing and setup., • Disassembles and reassembles commercial or residential equipment to perform trouble shooting and preventive maintenance., • Operates hand tools, power tools, gauges and measuring equipment to perform service to the equipment and/or mechanical system., • Explains the issue and work and work to be performed and completed to the customer. Provides a timeline and explain any wait times., • Perform routine maintenance and filter changes on equipment in accordance with the customer agreement., • Maintain an inventory and keep the service vehicle supplied with the appropriate stock required., • Maintain a professional appearance., • Build and maintain relationships with our clients.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$40.11—$51.32 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to locate root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with Planner Scheduler to optimize preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Updates records and reviews CMMS history and analyzes data. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment. · Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Experience in vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. · May be required to travel. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$40.11—$51.32 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job DescriptionSenior Facilities TechnicianAllendale, NJ Lynkx Staffing LLC specializes in placing talented professionals in the Life Sciences, Biotechnology, Pharmaceutical and Medical Devices industries in New Jersey. The Senior Facilities Technician position is responsible for performing and documenting the required maintenance and monitoring of the facility, systems and equipment. The required duties include execution of Preventive and Corrective/General/Emergency maintenance on the facility’s mechanical systems and equipment, installation of new equipment and general plumbing, electrical and carpentry work, operation of the facility’s systems, including HVAC, environmental monitoring and BMS systems, and other duties as assigned. The position is required to perform the listed duties to minimize equipment downtime, support projects, and ensure that the needs of internal and external customers are met. The objective of this position is to ensure the facility is maintained in a state of maximum uptime and reliability, and provide a safe, clean and efficient environment. • Monitor and respond to equipment or facility alarms, • Travel to and support different sites when necessary., • Work with facilities, engineering and operations to ensure schedules are maintained and delays are properly communicated to customer., • Be available to work nights or weekends, on a rotating basis, to service company needs., • Maintain proper stock, parts, tools, and safety equipment., • Take orders from supervisors for maintenance and repair of systems and buildings, • Clear and clean job sites of debris and other hazardous materials and ensure that they are restored to their original states, • Assist mechanics and other technical staff in testing, cleaning and repairing utility systems, • Provide support in repairing potholes and gutters, • Assist office staff in custodial services and grounds keeping activities, • Clean and maintain floor surfaces, ceilings and windows, • Empty trash receptacles and ensure appropriate disposing off of trash, • Clean restrooms and replenish supplies, • Move equipment and furniture around the building, • Assist stock personnel in handling inventory duties along with providing support in receiving, verifying and storing office supplies, • Maintain full knowledge of the environmental monitoring system as required for monitoring equipment and troubleshooting issues as they relate to equipment and the facility Systems., • Perform all assigned PM’s and WO’s on equipment., • Document all work as performed according to cGMP’s and HCATS SOP’s., • Provide ongoing insight to Supervisors where SOP’s and PM Job Plans need to be updated. Assist Supervisors as required in the preparation of change controls or other required documentation., • Maintain cleanliness of the Facility and Maintenance areas., • Maintain 100% training records for all required training., • Provide 24-hour emergency response as required., • Perform any work required to ensure the safety of the facility and staff, including snow/ice removal as required., • Coordinate contractors, ensure contractors are properly trained and the training is documented before any work is performed., • Perform all duties in accordance with all applicable safety regulations., • Monitor overall job environmental, health and safety aspects and understands the risks and liabilities associated with various facilities maintenance and repair activities., • Must be able to recognize hazard conditions, take appropriate work place safety measures and wear appropriate personal protective equipment to suit work environment.REQUIREMENTS, • 3 to 5+ years of experience in Facility Maintenance., • Good analytical skills and attention to detail with ability to read and interpret blueprints, plans, and manuals., • Excellent customer service skills with desire to exceed customer expectations., • Ability to work independently in a timely manner, ensuring job is done correctly the first time., • Experience in a cGMP environment preferred., • Must be able to communicate clearly and effectively, both written and verbally., • Must be able to work independently and in a team environment, • Must train and become gown qualified to enter and work in classified manufacturing areas., • Valid driver’s license and clean driving record, • Must be able to pass drug test(s) as required by company, • This job may require occasional evening and weekend work.Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description Job descriptions Title: Automotive TechnicianJob Type: Full-time SummaryS & A Auto Repair LLC is seeking an experienced Automotive Technician. This person will be responsible for the maintenance and repair of the cars. The Auto Technician performs a full range of duties, including but not limited to the installation, repair, maintenance, and inspection of mechanical and electrical systems. JOB DUTIES • Performs related work as assigned, completing tasks in an efficient, timely, and professional manner, • Communicates with management and the mechanical team about any preventive issues or future potential complications observed, • Ability to work safely, adhering to the company policies, • Maintains the area of work clean, • Maintains, installs, services, parts such as Engines, Transmissions, Starters, air compressors, brakes, air conditioners, mufflers, Tune-ups, alternators, radiators, Differentials, Struts & shocks, ABS Systems, and other parts, • Replaces fuses, light bulbs, electric switches, circuit breakers, fans, and other electrical parts., • Experienced and knowledgeable in various hand and power tools and their applications. Ensures their proper use, care, and storage, • Work closely with other employees to motivate, train, and develop team skills JOB QUALIFICATIONS • Strong work ethic, ability to work and problem solve independently, • Driver's license (Required), • Knowledge of the accepted practices, processes, materials, and tools of maintenance trades., • Knowledge of the proper use of the scan tools, diagnostic tools, heater machines, lifts, A/C machines and any other equipment found in the facility., • Knowledge of the proper use of chemicals in the facility, • Must have the hand and power tools to properly perform the job required and have the ability to adhere to the updates in new cars., • Ability to do routine mechanical and electrical maintenance and care for tools and equipment, • The job duties require an employee to bend, reach, kneel, and stand for extended periods, • Must be bilingual, English and Spanish or English and Portuguese Experience: • 5 years of experience in mechanical auto repairs, testing/ diagnostics., • Professional experience in Engine, Transmission, Exhaust, Electrical maintenance, suspension and power, Brake system, Cooling System, Fluid, and Battery., • High school diploma

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications Key Responsibilities: • Skilled in troubleshooting, maintenance, and support for system-level challenges in a production environment. Conduct failure analysis reports and investigations., • Work with suppliers to resolve component/yield/part problems in a timely manner and assist purchasing teams in driving supplier quality improvements and cost reductions efforts., • Collaborate with team members to troubleshoot and resolve assembly issues efficiently., • Proven experience in:, • Designing cables/harnesses. Experience with subcomponents and pricing., • PCB board/electrical enclosures testing and debugging., • Designing and developing fixtures to support production, • BOM structuring for multidisciplinary products, submitting, and managing engineering change orders, • Procedure writing to document assembly instructions production processes., • Proven ability to manage multiple projects simultaneously, maintain project timelines and work independently., • Knowledgeable and experienced in two or more of the following areas:, • PC/server build and configuration, HW setups, BIOS configuration., • Communication protocols like RS232, Ethernet, and ECAT., • Lab equipment: DVM, Megger insulation tester, network analyzer, oscilloscope., • ICT fixture design or knowing how to write requirements for PCB board testing., • PCB layout programs (OrCad, Deep trace, Altium), • Travel Requirements: Up to 10% travel to support customers worldwide. Technical Skills: • Manufacturing Software: SAP ERP, Autodesk AutoCAD, SolidWorks, Catia, OrCAD, AutoCAD, any harness design software, Cirris., • Production Planning Tools: Advanced Planning and Scheduling (APS), MRP II, Kanban systems, Gantt charts., • Data Analysis & Reporting: Microsoft Excel (Advanced), SQL (Intermediate), Power BI (Intermediate), VBA Macros., • Regulatory Compliance: Knowledge or previous exposure to ISO 9001, Six Sigma (Green Belt), Lean Manufacturing principles, OSHA standards, EPA regulations. Preferred Qualifications: Bachelor's or Master's degree in Electrical Engineering. Minimum Qualifications Doctorate (Academic) Degree and 0 years related work experience; Master's Level Degree and related work experience of 3 years; Bachelor's Level Degree and related work experience of 5 years Base Pay Range: $96,000.00 - $163,200.00 Annually Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Company Overview KLA is a global leader in diversified electronics for the semiconductor manufacturing ecosystem. Virtually every electronic device in the world is produced using our technologies. No laptop, smartphone, wearable device, voice-controlled gadget, flexible screen, VR device or smart car would have made it into your hands without us. KLA invents systems and solutions for the manufacturing of wafers and reticles, integrated circuits, packaging, printed circuit boards and flat panel displays. The innovative ideas and devices that are advancing humanity all begin with inspiration, research and development. KLA focuses more than average on innovation and we invest 15% of sales back into R&D. Our expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. Life here is exciting and our teams thrive on tackling really hard problems. There is never a dull moment with us. Job Description/Preferred Qualifications • Inspect, test, and evaluate incoming parts, subassemblies, and fully assembled semiconductor metrology tools., • Identify mechanical defects including issues with pneumatic systems, hydraulics, fittings, valves, and mechanical assemblies., • Inspect and troubleshoot electrical systems, including controllers, wiring harnesses, sensors, power supplies, and microprocessor-based control units., • Verify compliance with engineering drawings, schematics, specifications, and customer requirements., • Use precision measuring equipment such as calipers, micrometers, gauges, and rulers., • Perform functional testing and verification of electrical and mechanical systems., • Accept or reject materials and finished products based on inspection results., • Clearly document inspection and test results; maintain accurate quality records and inspection reports., • Quarantine and manage nonconforming materials in accordance with quality procedures., • Communicate inspection findings and corrective actions with manufacturing, engineering, and quality teams., • Support supplier quality by managing incoming inspections, vendor quality communications, and returns., • Track and report quality metrics including rejected material, failure trends, and vendor performance., • Participate in continuous improvement initiatives to improve product reliability, quality, and inspection efficiency. Minimum Qualifications • Associate's Degree (AS) in Electronic Engineering, Electrical Engineering Technology, or a related field required., • Bachelor's Degree (BS) in Electrical Engineering or related discipline preferred., • 2-4 years of hands-on inspection, testing, or quality experience in a manufacturing or equipment-build environment., • Experience as an electrical technician, production assembler, test technician, or quality inspector strongly preferred., • Strong ability to read and interpret electrical schematics, wiring diagrams, and mechanical drawings., • Familiarity with pneumatic and hydraulic systems and their failure modes., • Comfortable working around highvalue semiconductor or precision manufacturing equipment., • Proficient with measurement tools and inspection documentation., • Strong attention to detail, problem-solving mindset, and clear communication skills., • Enjoys hands-on technical work in a fast-paced manufacturing environment. Base Pay Range: $23.03 - $39.14 Per Hour Primary Location: USA-NJ-Totowa-KLA KLA's total rewards package for employees may also include participation in performance incentive programs and eligibility for additional benefits including but not limited to: medical, dental, vision, life, and other voluntary benefits, 401(K) including company matching, employee stock purchase program (ESPP), student debt assistance, tuition reimbursement program, development and career growth opportunities and programs, financial planning benefits, wellness benefits including an employee assistance program (EAP), paid time off and paid company holidays, and family care and bonding leave. Interns are eligible for some of the benefits listed. Our pay ranges are determined by role, level, and location. The range displayed reflects the pay for this position in the primary location identified in this posting. Actual pay depends on several factors, including state minimum pay wage rates, location, job-related skills, experience, and relevant education level or training. We are committed to complying with all applicable federal and state minimum wage requirements where applicable. If applicable, your recruiter can share more about the specific pay range for your preferred location during the hiring process. KLA is proud to be an Equal Opportunity Employer. We will ensure that qualified individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us at ___ or at +1-408-352-2808 to request accommodation. Be aware of potentially fraudulent job postings or suspicious recruiting activity by persons that are currently posing as KLA employees. KLA never asks for any financial compensation to be considered for an interview, to become an employee, or for equipment. Further, KLA does not work with any recruiters or third parties who charge such fees either directly or on behalf of KLA. Please ensure that you have searched ___ for legitimate job postings. KLA follows a recruiting process that involves multiple interviews in person or on video conferencing with our hiring managers. If you are concerned that a communication, an interview, an offer of employment, or that an employee is not legitimate, please send an email to ___ to confirm the person you are communicating with is an employee. We take your privacy very seriously and confidentially handle your information.

Test Engineer - Cutting Edge Space & Defense Products! This Jobot Job is hosted by: Stephen Brainerd Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $50 - $96 per hour A bit about us: With numerous offices across the country we are an industry leading Space Hardware Development company. We specialize in the design, manufacture, integration, and test of critical spacecraft components. We are a team of accomplished engineers and operations personnel with a diverse range of critical skills, decades of mission experience, and a passion to develop unique component solutions for space applications. If you are an experienced, Test Engineer with strong electro-mechanical background, then please apply! Why join us? Do you want to work with some of the nation’s best Clients like NASA and Boeing? We do too! • Meaningful Work!, • Best in Class Firm!, • Gold Level PPO Heath Insurance - 75% Covered!, • Competitive Compensation Package!, • Benefits Package!, • Accelerated Career Growth!, • Fun Company Activities!, • Many More! Job Details Responsibilities: 1. Support hands-on test operations, including the fabrication and assembly of electro-mechanical Ground Support Equipment., 2. Conduct testing of development and flight hardware to ensure optimal performance and compliance with all safety standards., 3. Document and record specialized test set-up configurations to ensure consistent and repeatable test results., 4. Utilize various test equipment, such as DMM, oscilloscope, etc., to assess and improve product performance., 5. Use various hand and power tools, such as drill, calipers, etc., to perform necessary adjustments and modifications., 6. Work with electrical components and systems, ensuring their proper installation and functionality., 7. Perform soldering tasks as required, adhering to all safety and quality standards. Qualifications: 1. Bachelor’s Degree in Engineering or a related field., 2. 2+ years of experience in a similar role within the aerospace or space industry., 3. Hands-on experience in the fabrication and assembly of Ground Support Equipment or similar., 4. Demonstrated experience in testing development and flight hardware., 5. Proficient in documenting and recording specialized test set-up configurations., 6. Experience using various test equipment, such as DMM, oscilloscope, etc., 7. Skilled in using various hand and power tools, such as drill, calipers, etc., 8. Solid knowledge and experience working with electrical components and systems., 9. Proficiency in soldering, with a keen eye for detail and quality., 10. Excellent problem-solving skills, with the ability to troubleshoot and resolve issues efficiently. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated magnet engineers to join its rapidly growing team. The magnet engineering roles will design, build, and test high temperature superconducting (“HTS”) magnets. HTS magnets are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, build, and test HTS magnets, • Develop specifications for magnets based on system design and performance goals, • Optimize magnet design and run analysis using Multiphysics simulation software (e.g. Ansys EM, Structure, COMSOL, etc.), • Develop design tools, data analysis software, and algorithms using Python or similar, • Incorporate design for manufacturing principles and support first builds, • Produce design specifications and collaborate with vendors to get quotes and deliver hardware that meets qualifications, • Support the implementation of tooling and manufacturing, • Design and execute magnet testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience with magnets, cryogenics, vacuum systems, or transformer design, • Experience in design using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience with Ansys and/or COMSOL, • Experience specifying machining, welding, and fabrication requirements, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in physics, computer science, electrical engineering, mechanical engineering, materials engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking experienced, highly motivated test engineers to join its rapidly growing team. The test engineering roles will design, commission, and operate test facilities for high temperature superconducting (“HTS”) tapes, current leads, and magnets. HTS magnets and power distribution are foundational components of Thea Energy’s planar coil stellarator, making compact, simpler, and lower-cost fusion systems possible. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Rapidly design, commission, and operate test and measurement systems and facilities, • Develop specifications for the testing of HTS tapes, current leads, and magnets, • Develop and execute test processes and procedures, • Develop and integrate cryogenic, vacuum, and Instrumentation & Control systems, • Develop data analysis software and algorithms using Python or similar, • Provide integration and test support for—and occasionally develop—LabVIEW software, • Collaborate with vendors to procure measurement and test equipment, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Experience designing or testing superconductors, magnets, cryogenics, or vacuum systems, • Experience designing or testing high-pressure or cryogenic fluid networks, • Experience using CAD software (e.g. SOLIDWORKS, CATIA, NX, etc.)Experience specifying and implementing precision instrumentation and data acquisition systems, • Experience operating or developing LabVIEW-based test facilities, • Experience writing and executing test plans, • Ability to work through and solve highly multidisciplinary engineering problems, • Ability to take initiative, work independently and as part of a team, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s own, • At least a bachelor’s degree in electrical engineering, mechanical engineering, or related fields, • Experience with magnetic confinement fusion, aerospace, medical devices, or other highly technical industries is idealCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionJob Title: Lab Technician Job Description The Lab Technician conducts routine and advanced analytical testing using standard laboratory instrumentation to evaluate parameters such as pH, moisture, temperature, weight, and microbiological safety. This role maintains precise and accurate quality documentation in compliance with GMP, SOPs, and HACCP standards, and actively supports cross-functional investigations and continuous improvement initiatives within a quality-focused environment. Responsibilities • Perform routine and non-routine analytical tests using standard laboratory equipment to measure pH, moisture, temperature, weight, and microbiological safety of samples., • Carry out microbiological analyses to help ensure product safety and compliance with established quality standards., • Maintain accurate, complete, and timely records of all test results and laboratory activities in accordance with GMP, SOPs, and HACCP requirements., • Follow established laboratory procedures and quality assurance protocols to ensure reliable and reproducible test results., • Support cross-functional investigations by providing analytical data, documentation, and technical insight as needed., • Contribute to continuous improvement initiatives by identifying opportunities to enhance testing methods, documentation practices, and laboratory workflows., • Ensure laboratory equipment is used correctly, handled safely, and maintained in good working condition., • Adhere to all safety, quality, and regulatory guidelines while working in the laboratory.Essential Skills, • Proven ability to conduct routine and non-routine analyses using standard laboratory equipment to measure pH, moisture, temperature, weight, and microbiological safety., • Strong microbiology and analytical testing skills within a laboratory setting., • Experience working within a quality assurance framework, including adherence to GMP, SOPs, and HACCP standards., • Demonstrated ability to maintain accurate and detailed documentation of test results and laboratory activities., • High level of attention to detail and strong organizational skills., • Ability to communicate effectively in more than one language (bilingual).Additional Skills & Qualifications, • Associate’s degree required., • Educational background in food science is strongly preferred., • Strong quality assurance mindset with a focus on accuracy and compliance., • Ability to work collaboratively with cross-functional teams and support investigations and continuous improvement efforts.Work Environment The Lab Technician works in a laboratory environment that follows strict GMP, SOP, and HACCP standards, with a strong emphasis on quality assurance and food safety. The role involves frequent use of standard laboratory equipment to measure pH, moisture, temperature, weight, and microbiological safety. Work is detail-oriented and documentation-intensive, requiring consistent adherence to established procedures and regulatory guidelines in a structured, process-driven setting. Job Type & Location This is a Contract position based out of Elmwood Park, NJ. Pay and Benefits The pay range for this position is $17.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionJob Description Electronics Technician 100% Travel | United States | Full-Time Position Overview Crown is seeking a highly motivated and skilled Electronics Installation/Disposition Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries. This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, network, and supporting systems. The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field. Key Responsibilities Electronic System Installation & Integration • Install, configure, align, test, FAA related equipment to include but not to be limited to communication systems, voice control system, and systems as assigned, • Setup and support electronic/networking equipment, • Connect and integrate Telco requirements including Commercial Telco, Field Cable, Fiber Optics, and VOIP communications, • Install new radio racks, radios, and other Government/Vendor Furnished Equipment, • Remove and properly dispose of legacy communications equipment, and create dispensation documentation, • Perform baseline electronic readings and generate required documentation to satisfy customer/FAA requirements, • Perform electronics testing procedures and coordinate frequency outages Infrastructure & Physical Buildout • Mount and install antennas, • Run and terminate coaxial cables and other communication cabling, • Install and test grounding systems and implement surge protection measures, • Perform basic electrical wiring and connections, • Install and assemble equipment racks, cable trays, and electrical conduit, • Ensure proper infrastructure to support the communication system Engineering, Compliance & FAA Interface • Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams, • Follow provided engineering packages and participate in required field modifications, • Participate in pre-installation meetings, • Interface with FAA Air Traffic and Technical Operations during installations, • Work confidently in geographically isolated environments and create solutions to unique on-site challenges, • Provide guidance and support to other installation and construction crew members, • Communicate effectively with team members, management, and stakeholders, • Understand the practical implications of electrical and electronic circuitry Required Technical Experience • Demonstrated experience installing and maintaining electronic communication and networking equipment, • Familiarity with FAA National Airspace (NAS) communications and networking systems, cabling, and equipment, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel) Minimum Required Qualifications • Must be a U.S. Citizen, • Must possess a valid driver’s license, • Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system, • Must be able to obtain a federal background screening security, • Ability to generate required documentation, • Understanding of Telco and networking equipment including Commercial Telco, RCL, Field Cable, VOIP, and Fiber Optics Physical & Work Environment Requirements • Ability to stand, sit, crouch, and work in one position for extended periods, • Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack, • Ability to climb and work at heights exceeding 60 feet, • Ability to occasionally perform work under severe time restraints, • Must be in good physical condition and able to pass a physical fitness assessment if required Schedule & Travel Typical schedule is Monday through Friday Must be able to work non-standard hours depending on site requirements. This is a 100% travel position. Compensation Hourly Rate Range: $20.00 to $49.00 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • 401K with company match, • Comprehensive medical, dental, and vision plans, • Generous PTO About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC area. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika is a specialty chemical company with a globally leading position in the development and production of systems and products for bonding, sealing, damping, reinforcing, and protection in the building sector and industry. Sika has subsidiaries in 103 countries around the world, produces in over 400 factories, and develops innovative technologies for customers worldwide. In doing so, it plays a crucial role in enabling the transformation of the construction and transportation industries toward greater environmental compatibility. Approximately 33,000 employees generated CHF11.20 billion in sales in 2025. Job Description Broad Function and Purpose of Position: Individual will work a 2nd shift work schedule and Document, analyze and test computer control systems related to user system design specifications and machine operating systems. Perform maintenance and calibration activities on devices and instruments. Troubleshoot existing equipment and control systems for efficiency and operation. Specific Responsibilities: • Application of systems analysis techniques and procedures, including consulting with users to determine hardware, software, or system functional specifications for control systems., • Documentation, analysis and testing of computer systems or programs, based on and related to user system design specifications., • Documentation, testing of computer programs related to machine operating systems., • Maintain, repair, and troubleshoot devices/instruments and labeling equipment., • Manage the Calibration Program, including schedule of calibrations, perform calibrations on specific instruments, maintain Calibration Manager Software compliant with ISO 9000 requirements, etc., • Perform scheduled maintenance of specific electrical and electronic devices and systems., • Provide weekend support, including on-site troubleshooting, if needed, to the plant operations in the field of controls.Qualifications, • Excellent analyzing, testing, and troubleshooting skills and organized approach to problem-solving., • Strong electrical background., • Experience with computer systems, programs, and PLC’s (Allen-Bradley desirable). Also, with pneumatic and hydraulic devices., • Ability to read technical drawings (P & ID’s), ladder logic diagrams; perform instrument calibrations. Good communication skills, ability to work independently or on a team., • Experience in ISO 9000 and/or process type (chemical/pharmaceutical/food) industrial facilities, • 3-5 years’ experience or minim 1 year plus Technical School. College degree a plus. Additional Information · 401k with Generous Company Match · Bonuses · Medical, Dental, and Vision Benefits · Paid Parental Leave · Life Insurance · Disability Insurance · Paid time off, paid holidays · Floating holidays + Paid Volunteer Time · Wellness/Fitness Reimbursements · Education Assistance · Professional Development Opportunities · Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description Job Title: R&D Formulation Scientist – Tablets, and Powders Job Description The R&D Formulation Scientist – develops and optimizes formulations for nutraceutical products across multiple dosage forms, including, oils, waters, soft gels, powders, and granulations. This role partners closely with Sales, Customers, Sourcing, and Purchasing to translate product requirements into robust, scalable formulations while ensuring material availability and cost efficiency. The scientist performs hands-on work in the product development laboratory, utilizes advanced analytical instrumentation, and troubleshoots technical issues to support high-quality, sustainable products that promote health and wellness. This position offers significant growth potential as the R&D function expands and provides opportunities to move into leadership and people management over time. Responsibilities • Partner closely with Sales and Customers to understand product requirements and technical needs and translate them into effective formulation strategies., • Develop and optimize formulations for oils, waters, soft gels, two-piece capsules, tablets, powders, and granulations within the nutraceutical and dietary supplement space., • Apply expertise in powder, liquid, and tablet formulations to create stable, manufacturable, and high-quality products., • Collaborate with Sourcing and Purchasing teams to ensure timely material availability, cost efficiency, and appropriate raw material selection., • Troubleshoot technical formulation issues, identify root causes, and implement effective, data-driven solutions., • Assist with analytical testing and quality assessments to ensure products meet specifications and regulatory and internal quality standards., • Perform hands-on experimental work in the Product Development laboratory, including batching, blending, encapsulation, and related lab-scale processes., • Utilize analytical instrumentation such as gas chromatography (GC), high-performance liquid chromatography (HPLC), and inductively coupled plasma mass spectrometry (ICP-MS) to support formulation development and analytical chemistry needs., • Support quality control activities by evaluating raw materials, intermediates, and finished products, including those involving fish oils and other nutraceutical ingredients., • Evaluate laboratory capabilities, identify opportunities for future R&D expansion, and recommend new technologies, methods, or equipment to enhance innovation., • Contribute to new product development projects from concept through commercialization, including experimental design, data analysis, and documentation., • Collaborate effectively with a predominantly Spanish-speaking laboratory team, using translation tools as needed to maintain clear communication and teamwork., • Maintain accurate records of experiments, methods, and results in accordance with internal procedures and good laboratory practices., • Work cross-functionally with Quality, Manufacturing, and other internal stakeholders to ensure formulations are scalable and suitable for production., • Bachelor’s degree in Food Science, Chemistry, or a related field., • 3+ years of R&D formulation experience, preferably in nutraceuticals or dietary supplements., • Proven expertise in formulation of powders, liquids, and tablets., • Bilingual skills, particularly Spanish, are a plus but not required., • Interest in purpose-driven work focused on high-quality, ethically sourced, and sustainable products. 401K, holiday, vacation and sick time offered to internal employees. Will have potential to grow into a leadership role - the R&D department is new and there will be room to expand to R&D formulators that report to them. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Apr 28, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description For those who’d rather be on the move than behind a desk. We’re opening our 2026 hiring pipeline now for curious, adaptable problem-solvers who love travel, hands-on work, and being part of a team that actually knows your name. If you’re the kind of person who can laugh through flight delays, figure things out on the fly, and find satisfaction in solving complex problems, this might be your perfect fit. We believe in transparency. Our four-week paid training is designed to prepare technically skilled individuals for the field. Success in training requires a basic foundation in electrical systems, programming, and communication networking. If you’re new to these areas, this role may not yet be the right fit. Why You’ll Love Working With Us Work + Travel, Combined. You’ll experience new cities, tackle unique projects, and earn all your own travel rewards while working directly with customers across North America. There is no office to report to, and you’ll be away from home while you’re working. Fair Pay That Grows With You. Starting salary $60,000–$75,000, depending on location, education, and experience. You’ll also receive per diem for meals, mileage reimbursement, utilization bonuses, weekend bonuses and more. We don’t have endless budgets, but we do have trust, teamwork, and appreciation of knowing every person by name. Room to Grow. We invest in your development through paid training, annual merit raises, and a 5% salary increase after six months. Learn, advance, and build a career that can take you in multiple directions. We will be your biggest cheerleaders of growth, even if you’re not with ProAutomated forever. Real Benefits + Real Flexibility. Health, dental, and life insurance, a matching 401(k), short & long term disability options, paid vacation, and flexible time off after 18 months. We take care of you, on and off the job. A Team That Gives You Community. We’re a smaller, people-first company where teamwork, adaptability, and humor are part of the job. All of our leaders have grown into their positions at ProAutomated, so your manager has done what they’re asking you to do. We hold each other to high standards, accept none of us are perfect, and push for excellence. You’ll be surrounded by people who have your back. What You’ll Do You’ll be part of the team that keeps automation projects moving. At ProAutomated, we don’t install systems, we partner with system integrators and manufacturers to ensure everything works flawlessly when it matters most. • Support data center startups, performing on-site mechanical, electrical, and control checks., • Lead startup, checkout, and acceptance testing for warehouse fulfillment and manufacturing systems in industries like food and beverage., • Partner with automation and controls engineers to test, troubleshoot, and validate their systems on-site., • Provide clear communication and updates to customers and project teams to keep progress smooth and accurate., • Typical travel rotations follow a days on & off schedule: 5 on - 2 off, 10 on – 4 off, or 14 on – 7 off. Every project brings new challenges and new locations., • Work with various customers, getting invaluable real world experience with massive companies, but with the ProAutomated team supporting you.What We’re Looking For, • A genuine love of travel, expect to be away from home on rotation (we’ll handle the logistics)., • Preferred experience: have a working knowledge of electrical systems, programming, and communication networking skills., • Adaptability and grit, you thrive when plans change and challenges pop up., • Strong communication and problem-solving skills., • Must live within 50 miles of a major airport (relocation assistance available)., • Personal vehicle within 45 days of employment (for local projects)., • Authorized to work in the U.S., • A technical degree or equivalent hands-on experience (3+ years) in a related field such as electrical, mechanical, or automation engineering. Physical Requirements The below physical requirements are considered essential functions of the role. • Ability to walk long distances across large facilities or job sites as part of daily work activities., • Climb ladders, stairs, or work at heights., • Lift, carry, and move up to 50 lbs., • Stand, kneel, or reach for extended periods Apply now to get on our radar for early 2026 hiring. Principals only — recruiters, please do not contact. ProAutomated is an Equal Opportunity Employer. We value diversity and are committed to creating an inclusive environment where all team members feel respected and supported. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or any other protected status. Powered by JazzHR GWCtqYw0K1

Job Description Title: Sr Product Manager (Hardware) Location: Remote Hanwha Vision America (HVA), an affiliate of the Hanwha Group, is a leading provider of advanced video surveillance products. As an industry leader, we offer a comprehensive range of IP cameras, storage devices, and video management systems. Our solutions are built on world-class technologies and have gained global success across various sectors, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision is seeking a Sr. Product Manager (Hardware) to lead product strategy and execution for its B2B surveillance portfolio. You will be working among a team of product managers for different products including hardware and software product, R&D, Sales, Marketing, Field engineers, support and other to ensure the success of the product. You will be working directly with the South Korea team on a daily basis to develop throughout the development and the life cycle of the product. Will be expected to mentor other product managers team members within the same group. Key Responsibilities: • Translating the pain points and customer requirements / pain points into Product/Market Requirements Document (PRD/MRD) and detail features set with clear understanding of each use case and feature workflow., • Manage the entire life cycle of product from product introduction to End of Life including market and competitive analysis, requirements gathering, and market validation., • Conduct product testing and evaluation and provide detailed feedback to internal PM team across the globe., • Must be able to read market trends, catch new technologies, and implement the new product or features., • Understand the B2B surveillance market, including pricing, features, value, and use cases., • Drive the product development processes and work closely with marketing communications teams to deliver new products and functionality to customers, • Ensure feedback is sought after and accurately reflected in the prioritization of product features and functions., • Act as a project manager to ensure that the product is being developed on schedule, understands challenges and concerns and meets the minimum requirements., • Become an expert on products and how they compare to other offerings in the marketplace, • Travel, including international for up to 20%. Qualifications: • Bachelor’s degree in engineering (Electrical, Computer, or related discipline preferred), • Experience in the B2B electronics industry, preferably in Security surveillance, ideally 8+ years of experience, • Technical background in IP networks, as well as capability to keep up with new technology and trend, • Capable of hands-on problem-solving, with the ability to generate ideas and solutions, • Ability to represent the company in various events, • Positive Interpersonal Attitude that exhibits a consistently positive and professional demeanor when dealing with colleagues, stakeholders, and customers. Capable of maintaining constructive and effective relationships even in challenging situations., • Self-Driven and Motivated and capable of demonstration a high level of initiative and motivation, capable of independently driving projects forward and overcoming challenges without the need for constant supervision., • Excellent written and communication skills, • Organizational and time management skills Hanwha Vision America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . About the Role: We are seeking an SME for Data Center Commission and Quality. This role demands direct knowledge of data center construction, with a strong focus on MEP systems. Working directly with CoreWeave project coordination members, you will ensure projects across the CoreWeave portfolio are completed on time and to the highest quality standards. Responsibilities include overseeing the installation and testing of components and systems, including mission-critical systems such as generators, UPS systems, electrical distribution equipment, redundancy protocols, and cooling systems such as chillers and CDUs. This is a remote-eligible position with 50% travel required. Candidates must reside in or near the Northern Virginia, Dallas, Richmond, Virginia, Livingston, New Jersey, or Atlanta, Georgia regions. What You'll Do: • Operate with safety at the forefront of all construction initiatives., • As necessary, collaborate with general contractors, trade partners, and vendors., • Serve as a liaison between clients and internal teams, facilitating communication during commissioning activities., • Review all written documentation, commissioning, and quality-related information., • Assist in developing, reviewing, and implementing commissioning plans as needed., • Assist in coordinating and attending pre-construction commissioning meetings., • Attend construction progress and pre-installation job-site meetings to gather relevant information., • Review meeting minutes for necessary revisions and assist in resolving design-intent discrepancies., • Inspect field installations and witness functional tests; conduct site visits as necessary., • Witness the execution of commissioning tests., • Travel to sites, client meetings, and training as required., • Participate in developing reports that define project progress, problems, and solutions for leadership teams and clients.Who You Are:, • 5+ years of experience in MEP (Mechanical, Electrical, and Plumbing) commissioning, with a preference for experience in data centers or critical facility environments., • Comprehensive understanding of data center infrastructure, including Building Management Systems (BMS), Electrical Power Monitoring Systems (EPMS), and complex MEP building systems., • Familiarity with local building codes and industry-standard frameworks, including NEC, NFPA, IEEE, and ASHRAE., • Proficiency in Microsoft Office Suite (Excel, Word, Outlook) and experience with industry-standard commissioning software or digital platforms., • Demonstrated ability to manage multiple projects simultaneously, maintaining high organizational standards and meeting strict project deadlines., • Self-directed professional with a proven track record of driving complex processes to completion and ensuring accountability across the project lifecycle., • Ability to develop and maintain effective professional relationships with contractors, clients, and cross-functional internal teams., • Direct experience in the coordination, commissioning, or quality assurance of electrical and low-voltage equipment., • Possession of a valid driver's license and a motor vehicle record that meets company insurability standards., • Willingness to travel up to 50% of the time and the ability to respond to emergency communications outside of standard business hours as required. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $143,000 to $191,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility).. What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Key Responsibilities: Climb towers (up to 500 ft or more) to install, inspect, and maintain wireless equipment. Install and secure antennas, coaxial cables, fiber lines, connectors, mounts, and grounding systems. Perform sweep and PIM testing (if trained) and basic troubleshooting of equipment. Assist with tower structural modifications, antenna alignment, and weatherproofing. Load/unload materials and rig equipment for tower lifts. Use hand tools, power tools, and test equipment safely and effectively. Follow detailed construction drawings, scopes of work, and RF design plans. Ensure all work is performed safely, with high quality and attention to detail. Maintain accurate daily field reports, timesheets, and photo documentation. Assist with on-the-ground civil or electrical tasks when not climbing. Participate in job site safety briefings and follow all OSHA and company safety standards. Requirements: Education & Experience: High school diploma or GED (required). 1–3 years of experience as a Tower Technician or equivalent climbing experience. Proven tower climbing experience (required). Experience with LTE, 5G, small cell, DAS, or microwave systems is a plus. Skills & Competencies: Ability to climb and work at heights for extended periods. Knowledge of tower rigging, safety procedures, and fall protection. Familiarity with installation and testing tools (Anritsu, Site Master, fiber testers, etc.). Strong teamwork, communication, and problem-solving skills. Ability to read and interpret construction documents and RF plans. Certifications (Required or Preferred): ComTrain or equivalent tower climbing certification (required). OSHA 10 or 30 Construction Certification. RF Awareness Certification. First Aid/CPR. Competent Rigger and Rescue Training (preferred). Valid driver’s license with clean driving record (CDL is a plus). Working Conditions: Must be able to climb towers 100–500+ feet frequently. Outdoor work in all weather conditions. Extended travel and overnight stays often required. Must be able to lift 50–75 lbs, bend, reach, and work in physically demanding conditions. May require hearing protection.

Job Description Resource Innovations is seeking a Lead Engineer to support and grow an energy efficiency program that delivers highly technical, whole-building solutions across both multifamily and commercial/industrial systems. While the program includes multifamily buildings, the work extends well beyond traditional residential scope and includes complex building systems, advanced controls strategies, custom energy calculations, and energy management. This role provides an opportunity to: • Lead technically complex projects from prescriptive through fully custom solutions, • Serve as a technical authority for both internal teams and external stakeholders Duties and Responsibilities • Technical Leadership & Project Delivery, • Lead and support the delivery of multifamily and C&I energy efficiency projects, including:, • Custom projects, • Energy Management, • Prescriptive, • Perform deep technical analysis across building systems, including HVAC, BAS/controls, lighting, and other complex systems, • Develop and review custom energy calculations, engineering models, and savings methodologies, • Engineering & Analysis, • Conduct energy audits and system assessments across multifamily and commercial facilities, • Develop project scopes and perform:, • BIN/hourly analysis, • Economic and lifecycle cost analysis, • Lead or support measurement & verification (M&V) activities, including:, • Site inspections, • Trend data analysis, • Functional performance testing, • Field verification, • Client & Program Interface, • Serve as a technical lead and liaison with utilities, program administrators, trade allies, and customers, • Provide guidance on:, • Measure eligibility, • Savings methodologies, • Program strategy and optimization, • Identify program and process gaps and recommend practical, scalable solutions, • Team Leadership (as applicable), • Mentor and support junior engineers and technical reviewers, • Provide technical QA/QC oversight to ensure consistency and quality across projects, • Support training, onboarding, and development of engineering staff, • Must reside in or be willing to relocate to the State of New Jersey, • Bachelor’s degree in Mechanical Engineering, Energy Engineering, or related field, • 5+ years of experience in energy efficiency, commissioning, or building systems engineering, • Strong understanding of:, • HVAC systems and controls, • Electrical systems and lighting, • Thermodynamics and fluid systems, • Experience with utility energy efficiency programs (custom, prescriptive, and/or energy management), • Experience developing and reviewing energy savings calculations and methodologies, • Prior experience managing or mentoring engineering teams, including oversight of project delivery, QA/QC, and staff development, • Knowledge of industry codes, standards, and program frameworks, such as:, • Technical Reference Manuals, • ASHRAE 90.1, • IECC, • Professional certifications such as:, • PE, • CEM, • CMVP About Resource Innovations Resource Innovations (RI) is a women-led energy transformation firm focused on impact. Building on our expertise in energy efficiency, we’re constantly expanding our portfolio of clean energy solutions to guide utilities through increasingly complex, connected challenges. Load flexibility. Electrification. Carbon reduction. With every step, we’re leading the charge to power change. Resource Innovations is an Equal Opportunity Employer, committed to ensuring equal employment opportunities for all job applicants and employees without regard to race, color, religion, national origin, gender, age, disability, marital status, genetics, protected veteran status, sexual orientation, or any other protected status. In addition to federal law requirements, Resource Innovations complies with applicable state and local laws governing non-discrimination in employment in every location in which the company does work. Compensation & Benefits Resource Innovations offers competitive salaries based on a candidate's skills, experience and qualifications for the position. The compensation range for the base salary for this position is $90,000 - $130,000. In addition to base pay, employees may be eligible for a discretionary annual bonus. The stated salary represents the expected compensation for this position. Final compensation will be determined based on factors such as the candidate's experience, education and location. The stated salary represents the expected compensation for this position. Final compensation will be determined based on factors such as the candidate's experience, education and location. At Resource Innovations, we believe supporting our people is essential to delivering impact. We offer a comprehensive benefits package designed to promote health, financial security, and work-life balance. This includes three weeks of paid vacation annually, paid holidays, a 401(k) retirement plan with employer match, medical, dental and vision coverage, parental leave, an employee assistance program, commuter benefits, and additional supplemental offerings. Employment with Resource Innovations is contingent upon the successful completion of a comprehensive background check and reference check. If applicable to the position, a pre-employment drug screen may also be required. The above job description and job requirements are not intended to be all inclusive. Resource Innovations retains the right to make changes or adjustments to job descriptions and/or job requirements at any time without notice.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. In 2024, Eurofins generated total revenues of EUR € 6,515 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description Electrical Factory Inspector (Remote/Travel) responsibilities include, but are not limited to, the following: • Support department objectives and company goals, • Be a team player, • Sustain a positive, enthusiastic and professional attitude at all times, • Accommodate requests with a smile and “let me see what I can do” attitude, • Adhere to manager directives, • Maintain a professional appearance and demeanor, • Arrive on time, properly dressed and prepared to work, • Perform all duties in a timely, accurate, honest and professional manner, • Communicate with customers professionally and in accordance with customer service standards, • Surveillance inspections of factories to assure products remain in compliance with conditions of granted certification., • Other duties assigned by management.Qualifications Basic Minimum Education Qualifications: • Knowledge of electronics, • Certification in Electronics, ideal but not required, • Willing to travel - This position requires 90% - 100% travel, • Able to rent a car, • Willing to work overtime and remote, • Cannot be on any no fly list, • Clean driver record, • Ability to maintain confidentially, • Needs to be receptive to and accepting guidance from others, • Ability to deal with difficult people and problems, • Able to work well in a team environment, • Able to work in a diverse group of people, • Attention to detail, • Ability to multi-task and prioritize assignments, • Able to sit or stand for long periods of time, • Able to lift up to 30 pounds Additional Information Position is full-time travel & hybrid, working Monday - Friday 8:00 am to 5:00 pm, with overtime as needed. • Compensation: $50,000 - $70,000, • Excellent full-time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for an experienced, highly motivated Electrical Engineer to join its rapidly growing team. The Electrical Engineer will work collaboratively across a cross-functional engineering team to help develop Thea Energy’s core planar coil stellarator fusion technologies. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. These roles will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems. Key Responsibility Areas: • Design, construct, and operate power supplies and control systems for high-temperature superconducting magnets and plasma heating systems (ECRH)., • Specify, design, develop, fabricate, and commission bespoke electronic systems, encompassing low-signal analog and digital equipment, capable of operating in high-stress industrial environments including high magnetic field, vacuum, and cryogenic temperatures., • Provide comprehensive specifications and facilitate the procurement of commercial off-the-shelf electronic products., • Actively engage in discussions to define requirements for the systems to be designed., • Provide full-cycle project support, from design to operation, including prototyping and testing of samples., • Collaborate and communicate effectively with engineering, physics/science, project management, and procurement groups., • Generate and revise work packages, including electrical drawings and technical specifications., • Manage critical procurement contracts and coordinate with vendors for electrical system design, procurement, and commissioning., • Select and implement industry standards (IEEE, ANSI, IEC, etc.) for use in prototyping projects and the future fusion power plant ecosystem., • Maintain a detailed project schedule, oversee the delivery of externally furnished documentation and equipment, and coordinate subcontractors. Ideal Experience & Skillsets:, • MS, or PhD in Electrical Engineering or related fields., • 5+ years of experience in the design and implementation of electrical and electronic systems in an industrial and/or scientific environment., • Technical proficiency in multiple areas of electrical engineering, including a subset of the following: power conversion, medium voltage distribution, switchgears, protective relaying, low voltage process-industrial facility design, instrumentation, and control., • Experience using PCB design software (Altium)., • Experience using CAD software (AutoCad, Solidworks)., • Experience in designing front-end analog electronics (differential amplifiers, trans-impedance amplifiers, precise and fast voltage comparators)., • Experience in the design and implementation of power electronics components: PWM converters (GaN/SiC/MOSFETs/IGBTs.), DCL-capacitors, high-frequency transformers, and inductors., • Experience using simulation software (PSpice, PLECS, MATLAB, Simulink)., • Nice to have experience with designing DSP- and MCU-based embedded control systems., • Experience in the integration of software and hardware in a high voltage, high current environment would be beneficial., • Experience in pulsed power systems; electrical and mechanical transient analysis and/or design implications in complex power systems., • Demonstrated ability to manage system installation within a complex project. Ability to interface with contractors, vendors, and designers., • Excellent written and verbal communication skills, ability to conduct design reviews, and organize/present material to both expert and non-technical audiences., • Ability to take initiative, work independently, and as part of a team., • Comfortable working to aggressive deadlinesCompany Benefits:, • Salary range $130,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Power Electronics Engineer to design and develop the HTS magnet power supply systems for the company’s Eos integrated stellarator. This role focuses on building a high-current AC-DC converter for HTS magnets, requiring precision current regulation, high reliability, and scalable architecture. This role will be responsible for power stage design, topology selection, control algorithm interface, and protection systems, as well as thermal and mechanical integration. This is a high-impact engineering role with hands-on prototyping, testbed validation, and cross-functional collaboration with embedded systems and instrumentation teams. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead the topology selection, component specification, and schematic design of the HTS Magnet PSU., • Design modular power converters with potential for arrayed operation and independent control., • Analyze and simulate power converter behavior (steady-state, dynamic, fault response) using PLECS, LTspice, or Simulink., • Integrate with embedded control hardware and firmware, ensuring proper current regulation, fast feedback, and fault handling., • Define and implement magnet protection mechanisms, including overcurrent shutdown, fast discharge, and crowbar circuits if needed., • Design thermal management systems, including heat sink layout, forced air/water cooling, and temperature monitoring for continuous operation., • Design PCB layout and support mechanical integration, cabling, and in-house assembly., • Develop test plans and perform hardware bring-up, debugging, and parameter optimization under staged load conditions.Ideal Experience & Skillsets:, • Bachelor’s or Master’s degree in Electrical Engineering, Power Electronics, or a related field., • 5+ years of hands-on experience designing and testing power converters, preferably in high-current or magnet power supply applications., • Proficiency in power stage design for DC/DC converters, buck/boost, full-bridge, or current-regulated linear stages., • Strong simulation and modeling skills using tools such as PLECS, LTspice, PSIM, Simulink, or Simplorer., • Experience with IGBTs, MOSFETs, SiC/GaN devices, and high-current busbar and interconnect layout., • Familiarity with current sensors, signal conditioning, and analog control circuits., • Experience with magnet power supplies, fusion, accelerator, or industrial high-current systems., • Knowledge of quench detection, crowbar protection, and superconducting magnet interface requirements., • Experience with thermal design and integration of cooling solutions in power electronics., • Exposure to EMI/EMC mitigation strategies and compliance testing., • Familiarity with FPGA- or DSP-based digital control systems., • Simulation: PLECS, LTspice, PSIM, Simulink., • CAD: Altium Designer, OrCAD., • Measurement: Oscilloscopes, Power Analyzers, Electronic Loads., • Communication: CAN, RS-485, Modbus., • Thermal: Flotherm, SolidWorks for mechanical integration.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description About Coresite: At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. Engineer Role: As a member of the company’s Engineering team, the Data Center Design & Performance Engineer is responsible for designing and reviewing electrical, mechanical, and site plans. This role requires making independent decisions and consistently exercising sound judgment to ensure alignment with CoreSite’s design standards. A strong understanding of electrical and mechanical systems, particularly in relation to data center redundancy and operations, is essential. The Engineer will collaborate closely with facility and operations teams to ensure all equipment installations are thoroughly reviewed and meet CoreSite's build standards. Duties: • Evaluate the efficiency, reliability, and engineering design of electrical, mechanical, plumbing, fire and life-safety, and building management systems for expansion and upgrade projects, • Define the scope for testing and commissioning to ensure design intent and operability of systems supporting the data centers, • Provide final quality assurance sign-off for engineered systems at the end of construction, • Collaborate with Sales Engineering to design custom engineering solutions for customer deployments, • Support the sales process for complex opportunities by providing technical expertise, • Assess installed systems to optimize efficiency and reliability, • Review and approve engineering modifications to existing facilities, • Provide engineering support to Data Center Operations, including failure analysis and system maintenance of critical infrastructure, • Ensure quality control for Operations teams, focusing on equipment, safety, and maintenance best practices, • Support commissioning activities by reviewing test scripts and witnessing test performance, • Maintain up-to-date documentation related to design, procurement, and operational standards, • Special projects as assigned Knowledge, Skills, & Abilities: • Ability to work 40% on-site from an approved CoreSite Market and 60% remotely from that same market, with flexibility to adjust onsite expectations as business needs evolve, • Ability to travel up to 40% of the time to support testing and construction activities, with flexibility to adjust travel commitments as business needs evolve. Must demonstrate adaptability in managing travel requirements in response to company growth, • In-depth working knowledge of data center design, operations, and infrastructure, • Strong strategic problem-solving abilities with a proactive approach to challenges, • Proficiency in AutoCAD, or other computer aided design software, as well as in Microsoft Office, primarily Excel, • Ability to operate and interpret results from test equipment, such as power quality meters, thermal imaging cameras, multi-meters, to evaluate and troubleshoot equipment operation and performance, • Commitment to personal development and the ability to pursue relevant certifications and accreditations (i.e. LEED AP, CDCDP, etc.), • Excellent written and verbal communication and problem-solving skills, with the ability to collaborate effectively with diverse personalities and cross-functional teams in both on-site and remote environments, • Bachelor’s degree in Engineering or a related field preferred; equivalent work experience, preferably within the data center, telecommunications, or real estate industry, considered in lieu of educational qualifications. The physical demands described here are representative of those that must be met by an employee to successfully perform the job’s essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the job’s duties, the employee is occasionally required to stand; walk, sit, use hands to handle or feel objects, reach with hands and arms, climb stairs, balance, stoop or kneel, talk, and hear. The employee must occasionally lift and/or move up to 25 pounds. Ability to travel is required. Compensation: Compensation for this role includes a base salary between $110,000 to $135,000 annually. This role is also eligible for an annual bonus and equity, based upon individual and company performance. Posting Timeline: This position is expected to be posted through April 15, 2026. Benefits Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for Cigna, • Healthcare and dependent care flexible spending account (FSA) plans, • Health saving account (HSA) plans for employees participating in the High Deductible Health Plan, • Life, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount, • 16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionDirector of Research & Development (R&D)Position Summary The Director of Research & Development will lead and execute all product innovation initiatives across the organization, with a strong emphasis on beverage development and commercialization. This role is responsible for driving new product development from concept through launch, serving as the primary customer-facing R&D leader for large customers and national chains, and ensuring all products meet regulatory, quality, and safety standards. The Director of R&D will oversee formulation, testing, and optimization while managing a fast-paced pipeline of multiple projects simultaneously. This position plays a critical role in bridging innovation, quality, operations, and customer needs to deliver commercially successful, safe, and cost-effective products. Key Responsibilities • Product Innovation & Development, • Lead end-to-end research and development of new products, flavors, and line extensions from ideation through commercialization., • Oversee formulation, pilot testing, scale-up, and production readiness for new beverages and related food products., • Drive continuous product optimization to improve taste, shelf life, ingredient performance, cost efficiency, and manufacturing scalability., • Customer Partnership & Commercialization, • Serve as the primary outward-facing R&D representative for customer inquiries, product specifications, and innovation discussions., • Partner closely with large customers, national chains, and strategic accounts to develop custom products and tailored solutions., • Translate customer needs and market trends into commercially viable product concepts., • Quality, Safety & Regulatory Compliance, • Support and partner with Quality Control on product testing, validation, and continuous improvement initiatives., • Ensure full compliance with FDA regulations, food safety standards, and industry best practices, with a strong focus on beverages, juices, and fruit-based products., • Actively support and participate in FDA audits and regulatory reviews., • Maintain and oversee on-site food safety and regulatory compliance in collaboration with cross-functional teams., • Specifications, Labeling & Documentation, • Develop, review, and maintain accurate product specifications, formulations, and labeling to ensure compliance and consistency., • Ensure nutritional, ingredient, and regulatory claims are accurate and aligned with current regulations., • Operational & Cost Optimization, • Identify opportunities to improve ingredient sourcing, reduce costs, and streamline production processes without compromising quality., • Partner with manufacturing and supply chain teams to ensure smooth transitions from R&D to full-scale production., • Leadership & Collaboration, • Work alongside a team of food scientists, including directly collaborating with one other food scientist to manage all R&D initiatives., • Prioritize and manage a dynamic R&D pipeline with multiple concurrent projects in a fast-paced environment., • Cross-functionally align with Operations, Quality, Sales, Marketing, and Supply Chain to ensure successful execution of R&D initiatives.Core Skills & Expertise, • Research & Development (R&D), • Beverage Manufacturing & Processing, • Beverage Product Innovation, • Food Science & Formulation, • Flavor Development and Applications, • Product Commercialization, • Food & Beverage Regulatory Compliance, • FDA Audits and Food Safety StandardsTop Skills, • Research & Development (R&D), • Beverage Manufacturing, • Beverage Product Development, • Formulation, • Food ScienceAdditional Skills & Qualifications, • Master’s Degree in Food Science or a related scientific discipline required., • Minimum of 10+ years of progressive R&D experience within the food and beverage industry., • Strong background in beverage development, with openness to adjacent categories such as sweets, flavor systems, or frozen novelties (e.g., ice pops with natural ingredients)., • Deep knowledge of flavor applications, ingredients, and sensory optimization., • Proven experience with FDA compliance, particularly within juice, fruit concentrates, or beverage categories., • Experience supporting and interacting with large customers and national chains., • Demonstrated track record of successful product innovation and commercialization. Annual salary + annual bonuses based on company performance. 401K with matching program after 1 year of employment. Paid bank holidays, 10 days vacation + 5 days sick leave. Open to relocation benefits. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Apr 30, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Job Title: R&D Formulation Scientist – Capsules, Tablets, and Powders Job Description The R&D Formulation Scientist – Capsules develops and optimizes formulations for nutraceutical products across multiple dosage forms, including capsules, oils, waters, soft gels, powders, and granulations. This role partners closely with Sales, Customers, Sourcing, and Purchasing to translate product requirements into robust, scalable formulations while ensuring material availability and cost efficiency. The scientist performs hands-on work in the product development laboratory, utilizes advanced analytical instrumentation, and troubleshoots technical issues to support high-quality, sustainable products that promote health and wellness. This position offers significant growth potential as the R&D function expands and provides opportunities to move into leadership and people management over time. Responsibilities • Partner closely with Sales and Customers to understand product requirements and technical needs and translate them into effective formulation strategies., • Develop and optimize formulations for oils, waters, soft gels, two-piece capsules, powders, and granulations within the nutraceutical and dietary supplement space., • Apply expertise in powder, liquid, and capsule formulations to create stable, manufacturable, and high-quality products., • Collaborate with Sourcing and Purchasing teams to ensure timely material availability, cost efficiency, and appropriate raw material selection., • Troubleshoot technical formulation issues, identify root causes, and implement effective, data-driven solutions., • Assist with analytical testing and quality assessments to ensure products meet specifications and regulatory and internal quality standards., • Perform hands-on experimental work in the Product Development laboratory, including batching, blending, encapsulation, and related lab-scale processes., • Utilize analytical instrumentation such as gas chromatography (GC), high-performance liquid chromatography (HPLC), and inductively coupled plasma mass spectrometry (ICP-MS) to support formulation development and analytical chemistry needs., • Support quality control activities by evaluating raw materials, intermediates, and finished products, including those involving fish oils and other nutraceutical ingredients., • Evaluate laboratory capabilities, identify opportunities for future R&D expansion, and recommend new technologies, methods, or equipment to enhance innovation., • Contribute to new product development projects from concept through commercialization, including experimental design, data analysis, and documentation., • Collaborate effectively with a predominantly Spanish-speaking laboratory team, using translation tools as needed to maintain clear communication and teamwork., • Maintain accurate records of experiments, methods, and results in accordance with internal procedures and good laboratory practices., • Work cross-functionally with Quality, Manufacturing, and other internal stakeholders to ensure formulations are scalable and suitable for production., • Bachelor’s degree in Food Science, Chemistry, or a related field., • 3+ years of R&D formulation experience, preferably in nutraceuticals or dietary supplements., • Proven expertise in formulation of powders, liquids, and capsules., • Bilingual skills, particularly Spanish, are a plus but not required., • Interest in purpose-driven work focused on high-quality, ethically sourced, and sustainable products. 401K, holiday, vacation and sick time offered to internal employees. Will have potential to grow into a leadership role - the R&D department is new and there will be room to expand to R&D formulators that report to them. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on Apr 24, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionSalary: $55 per hour About Jetvia Jetvia is redefining luxury air travel through world-class charter services, fractional ownership, and forward-thinking aviation solutions. With a growing fleet of Learjets and Vision Jets, we're committed to delivering safe, efficient, and exceptional experiencesfor our clients and our team. As we scale, were expanding our maintenance team to support high-reliability operations across the country. Position Overview The Mobile Support Aircraft Technician will perform a variety of aircraft modifications and maintenance functions on aircraft. Duties include advanced troubleshooting, removal and installations of airframe components, landing gear, engine components, electrical components, control systems and any other maintenance requirements required to return aircraft to service. Responsibilities Your Key Responsibilities (Essential Functions) • Must be able to communicate effectively with scheduling, flight crews, Technical Support, vendors, and leadership., • Perform maintenance and servicing of all aircraft mechanical and avionics systems., • Must demonstrate the ability to work independently to perform assigned maintenance and avionics tasks., • Responsible to coordinate/order, receive and inspect all tooling and materials needed to service the aircraft, prior to use/installation., • Responsible for inspecting the MSU truck, tools for calibration/operation, stocking levels and hazmat., • Arranges the shipment of all core units and tooling back to the proper location., • Properly completes work order signoffs, logbook entries, shift turnovers, expense reports and all other paperwork in a timely manner., • Ensures that all work accomplished meets quality standards, maintenance manual and company policies., • Establishes and maintains a professional working relationship and promotes the Jetvia brand positively when interacting with others., • Properly identifies (tags) parts and equipment. Stores aircraft components and other property securely and safely., • Operates and supervises use of special support equipment used in removal and installations of major components., • Coordinates with Line Service and FBO ops to schedule movement of aircraft and assist with movement of aircraft., • Provides regular updates on aircraft status and all support activity to Maintenance Control and leadership, as needed., • Reliable, self-motivated, and able to deal with stressful situations and timelines while maintaining a professional attitude., • Responsible for maintaining company training requirements. Qualifications: • Valid FAA Airframe and Powerplant license required., • Valid Drivers License required, • 4+ years combined experience in inspection, maintenance or servicing of corporate type aircraft, • AOG/Mobile experience preferred, • 2+ years Lear 60 aircraft experience, • Advanced knowledge of inspection and maintenance procedures for the noted aircraft model and systems., • Excellent communication skillsespecially in high-pressure situations, • Strong organizational and multi-tasking ability, • Availability for flexible scheduling and on-call rotation, • Proficient in Microsoft Word, Excel, and PowerPoint Benefits: • Competitive pay, • 401(k), • Meaningful Employee Equity Options, • Dental insurance, • Health insurance, • Vision insurance ATI Jet, Inc. is an equal opportunity employer and reviews applicants without regard to race, color, religion, sex, age, national origin, handicapped, or veteran's status. Employment with ATI Jet Inc. is contingent upon pre-employment drug testing, background checks and post-offer, job-related physicals (when applicable). Employment will be conditioned upon a negative result of this test. If the applicant tests positive for illegal drugs, the offer of employment will be withdrawn.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer — LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy’s stellarator fusion demonstration plant. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Work with a team of experts in developing controls for Thea Energy’s systems., • Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures., • Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement., • Create engineering tools, including both desktop and web-based testing applications., • Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms., • Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions., • Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems., • Develop and execute comprehensive test plans., • Document design specifications, test procedures, and user manuals for automation and acquisition systems.Ideal Experience & Skillsets:, • Extensive experience as a control engineer on complex, large-scale systems., • Experience with magnetic confinement fusion, aerospace, or other highly technical industries., • B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline., • 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink., • Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments., • Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments., • Competency in HIL/SIL software architecture., • Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionThis is a temporary 6-month contracted W2 position. The pay range for this position is $70-$85/hr (depending on prior experience) Job Functions: • Applies expertise as an emerging authority in the mechanical engineering discipline., • Conceives and develops solutions to difficult analytical and pneumatic/mechanical/electrical design problems., • Participates in establishing system or component design objectives and writes portions of complex specifications and engineering reports., • Reviews and helps to develop product specifications, • Conducts conceptual design studies using MCAD and other applicable design tools. Collaborates with other engineering functions, • Develops prototype hardware using internal manufacturing resources and outside vendors, • Tests product to verify that designs meet specification requirements such as environmental, regulatory and safety requirements, • Generates documentation supporting the design, • Design for Manufacturability and Assembly, DFM&A (cost/tooling/process considerations), preferably using SolidWorks CAD software., • Understanding in design and development of injection molded plastic, plastic extrusion, casting, sheet metal, metal stampings, additive manufacturing processes, and machined metal components, and assemblies with high part counts highly desirable., • Knowledge of mechanical design and development using metric ANSI/ISO dimensioning and drafting standards highly desirable., • Understanding of GD&T, mechanical measurement and testing equip., and statistical analysis of test data., • Experience with electronic document control systems in medical device and/or medical equipment design and development., • Highly skilled at analytical reasoning, mechanism design, creative problem solving, and mathematical analysis., • Ability to create and meet scheduled timelines (manage and coordinate tasks as required)., • Ability to work in a team environment., • Strong communication skills., • Familiarity with dimensioning and tolerance, thermal and structural analysis, and vibration testing/analysis, • Intermediate knowledge of FDA, IEC and UL standards relating to medical electronic equipment, • Strong technical and analytical ability, verbal and written communication skills, ingenuity and creativity, interpersonal and project management skills, • Ability to operate test equipment such as various pressure and flow measurement equipment, temperature/humidity chambers, PC-based data recorders, simulators, DVM’s and oscilloscopes, • BSME or MSME and a minimum of 10 years of related experience in design/product development of electro pneumatic assemblies including technical supervision of sub-projects, • Formal training in basic and advanced topics in Solid Works is strongly preferred, • Proficiency with Microsoft Windows, MS Office applications, and Adobe Acrobat, • Advanced proficiency with SolidWorks, MCAD/CAE software and database management software preferred, • Advanced proficiency with Microsoft Visio and Microsoft Project preferred Important Notice: Protecting Your Information Medvacon Talent Acquisition only conducts initial video interviews via Microsoft Teams or Zoom. All communication will come from an email address ending in @medvacon.com. If you receive a message that seems suspicious or is not from our official domain, please report it immediately to . Powered by JazzHR QpHnpP1sVI

Job DescriptionPosition Description: Electro/Mechanic Company History: Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision and we work every day to make them proud. To learn more visit: Responsibilities: \tEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. \tLocates sources of problems by observing mechanical devices in operation; listening for problems; using precision measuring and testing instruments. \tRemoves defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. \tDetermines changes in dimensional requirements of parts by inspecting used parts; using rulers, calipers, micrometers, and other measuring instruments. \tAdjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. \tControls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. \tFabricates repair parts by using machine shop instrumentation and equipment. \tMaintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. \tConserves maintenance resources by using equipment and supplies as needed to accomplish job results. \tProvides mechanical maintenance information by answering questions and requests. \tPrepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. \tMaintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. \tMaintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. \tMaintains safe and clean working environment by complying with procedures, rules, and regulations. \tContributes to team effort by accomplishing related results as needed. \tTroubleshoot PLC hardware, and programing. \tWorking knowledge of control circuits, software knowledge, and relay logic/schematics. \tAbility and or working knowledge of High voltage power. \tRemove place and or program VFD, HMI, and electrical components as needed. \tMaintain cleanliness of the work area, including sweeping, using a squeegee, and properly disposing of trash, bad product, cardboard, and plastic in designated bins. \tClean up after completing repairs, ensuring equipment and tools are cleaned and properly stored to keep the shop organized and safe. \tRegularly clean and organize maintenance tools and workspaces, especially after repairs, quality issues or equipment servicing to uphold a safe and efficient work environment. Qualifications/requirements \tMin 5 years experience \tTechnical or University degree or on-the-job experience a plus Strong bilingual communication skills (English and Spanish) to effectively interact with a diverse team and workforce \tKnowledge of packing equipment is a plus \tFreezer knowledge a plus \tStrong Sense of Safety \tAbility to walk, bend, stoop, reach, squat and lift up to 50lbs is required. \tColor Vision required. Food safety and quality responsibilities \tEnsure proper functioning of equipment necessary to support proper identification, control, monitoring, and documentation of Critical Control Point \tEnsure quality and safety specifications are met \tDemonstrate food safety and quality, SSOP and GMP policies and procedures \tIdentify employees, processes, and refresher training needed to appropriate management Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $25.00 - $30.00 Hourly

Job Description The Director of R&D will lead innovation, product development, and optimization efforts for a growing food and beverage organization. This role is highly customer‑facing and will work closely with major accounts, internal teams, and cross‑functional partners to bring new products and flavors to market. The ideal candidate is a hands‑on technical leader with deep experience in beverage development, natural ingredients, and flavor applications. Key Responsibilities • Lead innovation, product creation, and development for large customers and national chains., • Drive end‑to‑end product development, partnering directly with customers and internal teams., • Serve as the primary customer‑facing contact for product inquiries, specifications, and new concept ideation., • Support quality control testing and collaborate closely with QC teams., • Work alongside one Food Scientist to manage all R&D activities, including new flavors and product lines., • Support FDA audits and ensure compliance with all food safety and regulatory standards., • Oversee formulation, testing, scale‑up, and commercialization of new products., • Develop and maintain accurate product specifications, documentation, and labeling., • Improve ingredient sourcing, cost efficiency, and production processes., • Manage a fast‑paced R&D pipeline with multiple concurrent projects.Required Skills & Expertise, • R&D leadership within food and beverage, • Beverage manufacturing and formulation, • Food science and food manufacturing, • Flavor applications and flavor development, • Strong understanding of natural ingredients and product functionalityQualifications, • Master’s degree in Food Science or a related field., • Minimum 10 years of R&D experience in the food & beverage industry., • Strong focus on beverage development; open to candidates with experience in sweets, flavors, or natural ingredient‑based frozen products (e.g., ice pops)., • Knowledge of flavor applications and formulation systems., • Experience with FDA compliance, especially for juices and fruit concentrates., • Background working with large customers and national chains. Annual salary + annual bonuses based on company performance. 401K with matching program after 1 year of employment. Paid bank holidays, 10 days vacation + 5 days sick leave. Open to relocation benefits. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on May 1, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionCompany Description A subsidiary of Veolia group, Veolia North America (VNA) is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. VNA helps commercial, industrial, healthcare, higher education, and municipality customers throughout North America. Headquartered in Boston, Mass., Veolia North America has more than 10,000 employees working at more than 350 locations across the continent. Job Description Position Purpose: Project Engineer – Performs commissioning of electrical systems. Must be a self-motivated & energetic professional. Must have understanding of building electrical systems design & construction. Must have experience with commissioning process of electrical systems ranging in size, rating and complexity. The ideal candidate shall possess theoretical and practical knowledge in the commissioning, testing and troubleshooting of electrical systems and related controls. Candidate will be responsible for reviewing project information; executing daily field activities; maintaining project documentation; assisting the Senior Project Engineer; and providing guidance to associate project engineers. This role requires the candidate to have technical competency, organizational skills and is expected to work well in a team environment. Primary Duties/Responsibilities: • Commission electrical distribution equipment and related controls, primarily in data center environments, including medium voltage systems., • Review system designs for compliance with client facility goals., • Assist with preparing plans and procedures for execution of the commissioning process., • Conduct commissioning activities from the design phase through the occupation phase, in accordance with client requirements and industry commissioning process best practices., • Attend factory testing of equipment and document procedures and results., • Conduct functional testing of equipment and measure results using test instrumentation., • Fully document all field procedures including results, issues and observations either via company provided templates or online applications., • Report on system performance and make technical recommendations on issues., • Work with project teams to coordinate and execute field activities., • Review and provide input on commissioning project documentation and schedules., • Assist with submitting and maintaining daily commissioning reports., • Assist in the training of Associate Project Engineers., • Respond to project team and client inquiries in a professional and timely manner., • Comply with company, client, and project safety requirements., • Be knowledgeable with building equipment, including, but not limited to:, • Generator, • Generator Paralleling Switchgear, • High / Medium / Low Voltage Transformer (XFMR), • Uninterruptible Power Supply (UPS Systems), • Battery Systems, • Medium / Low Voltage Switchgear (SWGR), • Low Voltage Main Switchboards (MSB), • PLC Control, • Automatic and Semi-Automatic Switching Controls, • Electrical Power Monitoring System (EPMS), • Automatic Transfer Switch (ATS), • Static Transfer Switch (STS), • Power Distribution Unit (PDU), • Busways, • Remote Power Panel (RPP), • Grounding Systems, • Travel nationwide 50% - 75% if not assigned locally; may have periods of higher travel expectation.Qualifications Education/Experience/Background: • BSc/MSc in Electrical Engineering with 2 or more years with mission critical project experience, or relevant and applicable industry experience or a minimum of 4 or more years of experience in commissioning with mission critical project experience, or relevant and applicable industry experience., • Experience in Mission Critical facility commissioning essential., • Organized, detail-oriented, analytical, proactive, problem solver., • Good communication and relationship skills., • Effective written and verbal communication skills., • Ability to manage multiple tasks simultaneously and work with limited supervision., • Knowledge & experience with ASHRAE or BCxA commissioning guidelines preferred., • Knowledge & experience with InterNational Electrical Testing Association (NETA) test specifications., • Reasonable understanding of building management systems (BMS) and/or electrical power monitoring system (EPMS)., • Deep understanding and application of test instrumentation., • Ability to walk up to 5 miles per day., • Carry up to 50 lbs., • Ability to wear required PPE daily. Additional Information Pay Range: $110000 to $115000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionOphthalmic Technician - Oakland NJ Multi-Specialty Eye Care Practice A well-established eye care practice is looking to add an experienced Ophthalmic Technician to its clinical team. This role is ideal for someone who takes pride in patient care, enjoys a collaborative environment, and is comfortable supporting both clinical and procedural workflows. What You’ll Do • Support physicians by collecting patient histories and assisting with clinical evaluations, • Perform pre-testing and diagnostic assessments, including visual acuity and related eye exams, • Operate ophthalmic diagnostic equipment such as OCT, visual field testing, and imaging tools, • Assist providers during in-office procedures, including lasers and minor surgical services, • Administer ophthalmic drops in accordance with certification requirements, • Help maintain an efficient clinic flow across exam and imaging areas, • Complete clinical documentation and assist with administrative duties as neededWhat We’re Looking For, • Prior experience working as an Ophthalmic Technician in a clinical setting, • Strong attention to detail with the ability to manage multiple tasks throughout the day, • Clear communication skills and a patient-first mindset, • Comfortable working in a fast-paced, team-based environment, • Familiarity with medical office workflows and basic administrative support, • EMR experience, • High school diploma or equivalentKey Competencies, • Dependable and professional work ethic, • Strong customer service and interpersonal skills, • Ability to work well with physicians, staff, and patients Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description Title: Product Manager (Hardware) Location: Remote Hanwha Vision America (HVA), an affiliate of the Hanwha Group, is a leading provider of advanced video surveillance products. As an industry leader, we offer a comprehensive range of IP cameras, storage devices, and video management systems. Our solutions are built on world-class technologies and have gained global success across various sectors, including retail, transportation, education, banking, healthcare, hospitality, and airports. Hanwha Vision is seeking a Product Manager (Hardware) to lead product strategy and execution for its B2B surveillance portfolio. You will be working among a team of product managers for different products including hardware and software product, R&D, Sales, Marketing, Field engineers, support and other to ensure the success of the product. Key Responsibilities: • Translating the pain points and customer requirements / pain points into Product/Market Requirements Document (PRD/MRD) and detail features set with clear understanding of each use case and feature workflow., • Manage the entire life cycle of product from product introduction to End of Life including market and competitive analysis, requirements gathering, and market validation., • Conduct product testing and evaluation and provide detailed feedback to internal PM team across the globe., • Must be able to read market trends, catch new technologies, and implement the new product or features., • Understand the B2B surveillance market, including pricing, features, value, and use cases., • Drive the product development processes and work closely with marketing communications teams to deliver new products and functionality to customers, • Ensure feedback is sought after and accurately reflected in the prioritization of product features and functions., • Act as a project manager to ensure that the product is being developed on schedule, understands challenges and concerns and meets the minimum requirements., • Become an expert on products and how they compare to other offerings in the marketplace, • Bachelor’s degree in engineering (Electrical, Computer, or related discipline preferred), • Experience in the B2B electronics industry, preferably in Security surveillance, ideally 3+ years of experience, • Technical background in IP networks, as well as capability to keep up with new technology and trend, • Capable of hands-on problem-solving, with the ability to generate ideas and solutions, • Ability to represent the company in various events, • Positive Interpersonal Attitude that exhibits a consistently positive and professional demeanor when dealing with colleagues, stakeholders, and customers. Capable of maintaining constructive and effective relationships even in challenging situations., • Self-Driven and Motivated and capable of demonstration a high level of initiative and motivation, capable of independently driving projects forward and overcoming challenges without the need for constant supervision., • Excellent written and communication skills

Job DescriptionJob Description Communications Electronics Installation Technician 100% Travel | United States | Full-Time Position Overview Crown is seeking a highly motivated and skilled Communications Electronics Installation Technician to support our floating electronics installation crew. This position requires 100% travel across the United States, often aligned with FAA regional boundaries. This role extends beyond traditional electronics work. The selected candidate must be capable of installing and integrating a complete communications facility, including infrastructure, grounding, cabling, radios, and supporting systems. While not initially designated as a formal lead role, this position offers significant opportunity for growth and increasing leadership responsibility based on performance. The technician may serve as a key on-site resource, interfacing directly with FAA Air Traffic and Technical Operations personnel while supporting installation and construction crews in the field. Key Responsibilities Communications System Installation & Integration • Install, configure, align, test, and troubleshoot VHF and UHF radios and associated communication systems, • Setup and support Radio Control Equipment (RCE), • Connect and integrate Telco requirements including Commercial Telco, RCL, Field Cable, and Fiber Optics, • Install new radio racks, radios, and other Government Furnished Equipment (GFE), • Remove and properly dispose of legacy communications equipment, • Perform baseline electronic readings and generate required documentation including FRDF in accordance with FAA Technical Handbooks, • Perform electronics testing procedures and coordinate frequency outages Infrastructure & Physical Buildout • Mount and install antennas, • Run and terminate coaxial cables and other communication cabling, • Install and test grounding systems and implement surge protection measures, • Perform basic electrical wiring and connections, • Install and assemble equipment racks, cable trays, and electrical conduit, • Ensure proper infrastructure to support the communication system Engineering, Compliance & FAA Interface • Read, interpret, and implement engineering diagrams, blueprints, and electrical wiring diagrams, • Follow provided engineering packages and participate in required field modifications, • Participate in pre-installation meetings, • Interface with FAA Air Traffic and Technical Operations during installations, • Work confidently in geographically isolated environments and create solutions to unique on-site challenges, • Provide guidance and support to other installation and construction crew members, • Communicate effectively with team members, management, and stakeholders, • Understand the practical implications of electrical and electronic circuitry Required Technical Experience • Demonstrated experience installing and maintaining VHF and UHF ground-to-air communication equipment, • Familiarity with FAA National Airspace (NAS) communications systems, cabling, and equipment, • Ability to read and interpret schematics, blueprints, and wiring diagrams, • Working knowledge of Microsoft Windows and Microsoft Office (Word, Excel) Preferred Technical Skills & System Exposure Experience with the following is strongly preferred but not required: • Spectrum Analyzer, • Time-Domain Reflectometer, • Signal Generator, • Oscilloscope, • Microwave systems, • Voice Switch systems, • Air Traffic Control systems, • Commercial Driver’s License and trailer experience, • Experience operating heavy equipment Minimum Required Qualifications • Must be a U.S. Citizen, • Must possess a valid driver’s license, • Must be able to independently cover travel-related expenses in advance, which are reimbursed within approximately two weeks through a voucher system, • Must be able to obtain a federal security clearance. Clearance eligibility includes no legal offenses within the past five years, no ongoing legal issues, and honorable discharge if previously having served in the military., • Associate’s Degree or completion of a two-year technical training or certification program in a relevant field, plus a minimum of two years of relevant experience, • Ability to generate required FAA documentation including FRDF, • Setup capability for Radio Control Equipment (RCE), • Understanding of Telco requirements including Commercial Telco, RCL, Field Cable, and Fiber Optics Physical & Work Environment Requirements • Ability to stand, sit, crouch, and work in one position for extended periods, • Ability to lift up to 75 lbs and move up to 350 lbs with hand truck or pallet jack, • Ability to climb and work at heights exceeding 60 feet, • Ability to occasionally perform work under severe time restraints, • Must be in good physical condition and able to pass a physical fitness assessment if required Schedule & Travel Typical schedule is Monday through Thursday, 6:00 AM to 4:30 PM. Must be able to work non-standard hours depending on site requirements. This is a 100% travel position. Compensation Hourly Rate Range: $20.00 to $49.00 per hour (W2) Compensation is determined based on experience, qualifications, geographic location, and internal equity considerations. Crown complies with all applicable state and local pay transparency laws. The listed compensation range represents the good faith salary range for this position at the time of posting. Actual compensation will be based on experience, qualifications, geographic considerations, and business needs. Benefits • 401K with company match, • Comprehensive medical, dental, and vision plans, • Generous PTO About Us Crown Innovations is a recognized leader in research, development, and engineering, with deep expertise in air traffic management, survey administration, lifecycle data management for informed decision-making, infrastructure sustainment and modernization, emerging technologies, and National Airspace System (NAS) integration. For over 30 years, we have supported a diverse portfolio of clients—including the FAA, NASA, the Energy Information Administration (EIA), state and local governments, and commercial organizations such as the Ohio and North Carolina Departments of Transportation. As a prime contractor on several high-impact federal programs, Crown offers comprehensive capabilities in engineering, strategic planning, data analytics, software development, modeling and simulation, and regulatory compliance. We are at the forefront of enabling the safe and efficient integration of uncrewed aircraft systems (UAS) and advanced air mobility (AAM) into the NAS, while also supporting infrastructure modernization efforts through robust lifecycle data management solutions. Whether advancing innovative air traffic concepts, enhancing operational performance, or enabling the future of urban air mobility, Crown is committed to shaping a safer, smarter, and more efficient infrastructure landscape. Crown has consistently been voted one of the best places to work in the Washington, DC area. Persons unable to complete an online application should contact Crown HR for assistance at (703) 650-0663 ext. 3068. As a government contractor, most positions require U.S. citizenship. Crown is a VEVRAA Federal Contractor. EOE: Vets/Disability

Job Description About Coresite At CoreSite, we empower a more connected future through high-performance data centers and interconnection solutions. Recognized as a trusted partner in digital transformation, our strategically located facilities and innovative services enable businesses to connect, collaborate, and grow in an ever-evolving technological landscape. Our culture is defined by operational excellence and a relentless drive for innovation. We foster a collaborative environment where every team member is valued, wins are celebrated as a team, and ownership is part of our DNA. At CoreSite, we’re not just building state-of-the-art infrastructure—we’re creating a community of forward-thinkers committed to solving complex challenges and delivering exceptional customer experiences. At CoreSite not only are we Committed to Excellence, but we also Build Connections, Own It, Do the Right Thing, Have Fun, and Win as a Team. Join us and be part of a team that is shaping the future of digital infrastructure while nurturing your professional growth and success. *This is not the official job application; this posting is specifically for CoreSite SkillBridge program. Please note that this program is exclusively for Military Spouse Fellows or Active-duty US military personnel transitioning out of the military to civilian workforce. SkillBridge Data Center Technician Role: The SkillBridge Data Center Technician assists in the operational integrity, security, and regulatory compliance of the data center. The technician will gain working knowledge of data center operations including telecommunications, mechanical, electrical, and fire life safety systems as well as data center operating procedures. The technician will be responsible for day-to-day operations of the data center including facilities and telecommunication infrastructure. The responsibilities are wide ranging and multi-disciplinary. Mechanical responsibilities will include working on chilled water systems and components, HVAC systems such as roof top units, CRAC/CRAH units, humidification systems, and central plant operations. Electrical responsibilities will include working on electrical/critical power distribution from the Utility/Generator main switchgear through the UPS systems out to the customer load including power circuit installations. Fire Life Safety responsibilities will include monitoring wet sprinkler systems and pre-action sprinkler systems as well as their associated detection devices. Telecommunications responsibilities will include cross connect installations, cabling infrastructure management, advanced remote hands support, and customer cage and cabinet build outs. Other responsibilities will include customer infrastructure build-outs (cage builds, overhead installations, rack and stack), cable termination and testing, maintenance work, monitoring and responding to mechanical, electrical, fire protection, telecom, and security systems. These systems include, transformers, PLC’s, generators, switchgear, UPS systems, STS’, ATS’ PDU’s, chilled water systems, CRAC/CRAH, wet sprinkler systems and pre-action sprinkler, network equipment, transmission media, cabling infrastructure, security hardware, and CCTV. Duties: • Operate, monitor, maintain, and respond to abnormal conditions in facilities systems. Areas include: Electrical, Mechanical, Communications, Building Monitoring and Control., • Completion of CoreSite’s Data Center Operations Qualification Program., • Ensure data center operates at maximum operational efficiency, including analyzing existing operating conditions, recommending new technologies, and improving overall efficiency and cost reduction as per Coresite guidelines., • Manage systems to avoid unplanned, customer-impacting outages., • Follow direction from data center management regarding the data floor and back of house mechanical loading capacity thereby ensuring that the cooling system is operating at its highest efficiency., • Work with contractors and consultants for all system expansions, corrections and upgrades., • Work with the senior technicians to track and complete an aggressive preventive and predicative maintenance schedule., • Assist with the database management of maintenance discrepancies and work with to resolve site issues based on agreed upon priorities., • Trouble ticket and remote hands management., • Fiber and Copper cabling terminations., • Circuit path creation and verification., • Coordinate and oversee power installations and upgrades., • Complete work orders., • Infrastructure projects including cage and cabinet build-outs, overhead installations, and rack and stack., • Navigate and utilize a CMMS system., • Use developed procedures to solve problems., • Assist in asset and consumable inventory management., • Tracking and trending operational characteristics., • Tracking and proper labeling of all equipment per established procedures., • Provide day-to-day exceptional customer service and support., • Incident escalation, response, and follow-up report writing., • Maintain and complete regular facility and security tours documenting and responding to found issues., • Manage building service requests through resolution., • Perform and complete work orders and customer service tickets in a timely manner., • Provide applied mechanical and integrated control expertise for the entire data center., • Serve in a technical writing capacity in regard to the derivation of procedures for preventative or corrective maintenance activities., • Adhere to and promote CoreSite’s Principles of Operational Excellence, culture, and Core Values. Requirements Knowledge, Skills, and Abilities: Interaction with Others -This position is required to interact with CoreSite personnel, vendors, partners, contractors and clients. Work Attributes: Knowledge- • Firm and proven understanding of the electrical and mechanical systems used in a data center environment., • Firm and proven understanding of fiber optics / cabling infrastructure and industry best practices., • Firm and proven understanding of Proficient knowledge of NEC, NFPA 70E, NFPA 72, NFPA 25, and compliance issues as well as building codes in regard to fire life safety., • Proficient knowledge in industrial safety best practices (i.e. lockout/tag out, arc flash protection, OSHA and state regulations)., • Proficient and experienced with data trending / tracking and analysis and ability to rapidly learn and use PC based, integrated critical monitoring systems. Skills- • Minimum of 2 years experience installing, maintaining, and/or troubleshooting large commercial and industrial systems including:, • Chilled Water Systems, Large Centrifugal Chillers, Cooling Towers, Heat Exchangers, Water Treatment Systems, VFD’s and Pumps, HVAC equipment, CRAC/CRAH’s, Humidification Systems, BMS and PLC Controls, Emergency Standby Diesel Generator Systems, Fuel/Oil systems, 480/277 and 208/120 electrical generation and distribution, Static UPS Systems, Double Interlock Pre-Action Systems, Communications cabling, Cabling infrastructure, Network infrastructure and hardware., • Experience laying out, pulling, dressing, and terminating fiber and copper communications cabling., • Experience diagnosing and repairing IT hardware, servers, network switches, structured cabling., • Proven leadership skills, • Excellent communication skills, both written and oral, • Proficient with Microsoft Office (Word, Excel, PowerPoint) Abilities - • Ability to communicate effectively with customers and internal staff., • Ability to coordinate, supervise and communicate with contractors who perform maintenance or upgrade work on these systems., • Ability to learn quickly and address issues as they arise during normal working hours or after hours., • Ability to operate in and promote a rigorous process-driven team environment, • Ability to logically analyze and solve problems, • Ability to effectively multi-task multiple projects, • Operate Hand and Machine Tools (hammer, drill, saw, etc.), • Operate electrical tools such as a multi-meter or infrared camera Education/Experience- • Military service members eligible for the DoD SkillBridge Program, • High school diploma or general education degree (GED) Not only does CoreSite have a fun, team-focused work environment, but we also offer great benefits to all employees regularly scheduled to work more than 20 hours a week! • First-day medical insurance through Cigna with generous premium cost coverage, • Dental insurance through Delta Dental, • Vision insurance through VSP, • Telemedicine through MDLive for CignaHealthcare and dependent care flexible spending account (FSA) plansHealth saving account (HSA) plans for employees participating in the High Deductible Health PlanLife, AD&D, short-term disability, and long-term disability insurance fully paid by the company, • Voluntary coverage benefits for supplemental life, critical illness, accident, and hospital insurance, • First-day eligibility for 401(k) savings plan through Fidelity, which includes an attractive matching company contribution with a 5% company match, • Discretionary annual bonus and equity incentive plan, • Employee stock purchase plan (ESPP) with a 15% discount16 days of paid time off (PTO)11 paid company holidays and additional floating holidays, • Additional paid time off for school events, elder care, volunteering, bereavement, jury duty, voting, parental leave and disability leave, • Free parking or a company contribution toward a public transit pass Additional Perks, • Wellness Reimbursement Program: Yearly stipend of $500 for employees and $300 for dependents, up to $800 total for the family, • Wellness Incentive Program: Participate in various wellbeing activities to earn up to $450 per year in cash incentives, • Technology Stipend: $100 monthly stipend., • Educational Reimbursement Program: Work-related learning and development with reimbursement on qualifying degree programs, up to $5,250 per year, • Giving Back: Charitable donation matches up to $5,000 per year and nominate organizations for Company Foundation grants, • Financial Management: Access to financial coaching, digital tools and services to manage and pay student loan debt quicker, • Pet Insurance: Keep your furry friends healthy and happy, • Family Planning: Benefits and services related to fertility, pregnancy, menopause, adoption and surrogacy, • Employee Assistance Program: 24x7 service to support family, work, money, health, legal and life challenges, • Counseling and Caregiving, • Programs: Including access to mental health services, licensed counselors, and caregiving tools including membership for finding care., • Referral Bonus: Receive a $3,000 cash bonus if referred candidate is hired and meets eligibility requirements, • Discounts: Discounts, cash back offers and perks on thousands of brands, • LinkedIn Learning Membership: Support your development when accessing LinkedIn’s online library of courses and videos General Statements - Applicants must be currently authorized to work in the United States on a full-time basis. The employer will not sponsor applicants for work visas. Please note that all offers of employment are contingent upon the successful completion of a background check and, where permitted by law, a 5-panel drug test conducted after the offer letter is signed, which will screen for THC, opiates, PCP, cocaine, and amphetamines. Thank you for your understanding and cooperation. Applicant Privacy Notice: CoreSite is committed to protecting the privacy and security of personal information submitted by applicants. The California Consumer Privacy Act (CCPA) requires us to provide you information about our personal information handling practices. As a result, we’re providing this Privacy Notice that describes how we collect, use, share, and update personal information from individuals who wish to be considered for employment with CoreSite. To read the Applicant Privacy Notice, please go to . Unauthorized reproduction or distribution of this job posting on external sites is prohibited without prior written consent from CoreSite. We are not responsible for any postings or offers not originating from our official channels or approved partners.

Job DescriptionCompany Description Uncommon Schools is a nonprofit network of high-performing public charter schools dedicated to providing an exceptional K-12 education in economically disadvantaged communities. Operating in Boston, Camden, New York City, Newark, and Rochester, we are committed to closing the college completion gap and preparing every student for college and beyond. Our students consistently exceed national benchmarks, reflecting our dedication to their success. We invest deeply in our educators, offering weekly coaching, feedback, and professional development to ensure excellence in teaching and leadership. Join us to work hard, do good, and make a lasting difference! Job Description Uncommon Schools North Star Academy is seeking a Robotics Teacher who can teach students to use computer systems (including hardware and software) to program, write software, set up functions, enter data, and process information. Students will evaluate designs or specifications to ensure quality and interpret design or operational test results. The teacher will support students with the programming of robotic equipment, as well as with testing the performance of electrical, electronic, mechanical, and integrated systems/equipment. Our teachers prepare all students such that they have the choice to study and excel in any STEM discipline. Our teachers become experts in their course content and have a keen sense of how to motivate and inspire high school students. Responsibilities 1. Instruction • You'll create a safe and interactive environment where students feel empowered to engage in robotics and allow them to demonstrate knowledge of machines and tools, including their designs, uses, repair, and maintenance., • You’ll build students’ knowledge of the practical application of engineering science and technology, including applying principles, techniques, procedures, and equipment to design and produce goods., • You’ll teach a curriculum of Robotics that inspires students to be science and technology leaders, • You'll develop students’ skills of questioning, modeling, constructing explanations, data analysis, argumentation, and planning and conducting interactive labs., • You'll facilitate student-led inquiry of various scientific topics and engage students in lab and project-based performance tasks., • You'll work with the Science department to determine academic and engagement goals for students. 2. School Culture • You’ll build positive relationships with students to ensure they feel seen, loved, and heard., • You’ll partner with students’ families to ensure appropriate resources are available to support their child's learning needs., • You'll engage in practice-based professional development, mentorship, and coaching sessions., • You'll participate in weekly, school-wide meetings to cultivate community, model our core values, and encourage student achievement., • You'll partner with your grade level team to develop academic goals and practice instructional strategies.Qualifications, • Candidates ideally have relevant experience and/or coursework, but more importantly, they must have the energy and passion to empower our students through technology, • A commitment to the mission of Uncommon Schools, • A demonstrated commitment to supporting students’ social emotional and academic development, • An enthusiasm for collaborating with internal and external partners in the best interest of students, • A demonstrated interest in impacting K-12 students in urban schools and communities (1-2 years experience preferred)., • Expertise in STEM, Technology, Engineering and/or Robotics (2-3 years of experience preferred)., • Prior to the start of employment, you must have a bachelor's degree from an accredited college or university. Teacher certification is not a prerequisite for consideration at Uncommon Schools in the state of NJ, but you do need to meet NJ state certification eligibility requirements (a final undergraduate or graduate cumulative GPA of 3.0 for graduates on or after 9/1/16, or 2.75 if you graduated prior to 9/1/16). All instructional staff are required to become certified in the state of New Jersey within a reasonable period after beginning employment. Additional Information Our people are what make us Uncommon. We offer competitive compensation and comprehensive benefits that support the personal health, wellness, and finances of our staff and their families. Our compensation philosophy values equity & fairness and attracting & retaining top talent. Compensation Compensation for this role is between $60,000 to $85,000. Starting pay is determined using various factors including but not limited to relevant full-time teaching experience, education certifications, and tenure with Uncommon Schools. Candidates without full-time Teaching experience will likely have a starting salary of $60,000. Benefits • Generous paid time off inclusive of sick time, paid holidays, and 10 weeks of paid breaks (Spring, Winter, and Summer)., • Extensive, best-in-class training and development, • Comprehensive health, dental, and vision insurance plans + pre-tax flexible spending (FSA), dependent care (DCFSA), and health saving accounts (HSA), • Financial Planning, • New Jersey Pension program, • Paid leave of absence options (parental, medical, disability, etc.) At Uncommon, we believe that a supportive and welcoming environment helps our students, staff, and community thrive. We are dedicated to building a team that brings a wide range of perspectives and experiences, reflective of the communities we serve---with over 70% of our staff identifying as people of color. Our organization values respect and open dialogue on important topics that shape our school culture. As an equal opportunity employer, Uncommon provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. We also ensure that individuals with disabilities receive all privileges and benefits associated with employment and are provided reasonable accommodations for the interview process and to perform core job functions. If you would like to request an accommodation, please email .

Job Description Job Title: R&D Formulation Scientist – Tablets, and Powders (Nutraceutical) Top Must Have: Need to come from the Nutraceutical industry, working with vitamins and dietary supplements! Job Description The R&D Formulation Scientist – develops and optimizes formulations for nutraceutical products across multiple dosage forms, including, oils, waters, soft gels, powders, and granulations. This role partners closely with Sales, Customers, Sourcing, and Purchasing to translate product requirements into robust, scalable formulations while ensuring material availability and cost efficiency. The scientist performs hands-on work in the product development laboratory, utilizes advanced analytical instrumentation, and troubleshoots technical issues to support high-quality, sustainable products that promote health and wellness. This position offers significant growth potential as the R&D function expands and provides opportunities to move into leadership and people management over time. Responsibilities • Partner closely with Sales and Customers to understand product requirements and technical needs and translate them into effective formulation strategies., • Develop and optimize formulations for oils, waters, soft gels, two-piece capsules, tablets, powders, and granulations within the nutraceutical and dietary supplement space., • Apply expertise in powder, liquid, and tablet formulations to create stable, manufacturable, and high-quality products., • Collaborate with Sourcing and Purchasing teams to ensure timely material availability, cost efficiency, and appropriate raw material selection., • Troubleshoot technical formulation issues, identify root causes, and implement effective, data-driven solutions., • Assist with analytical testing and quality assessments to ensure products meet specifications and regulatory and internal quality standards., • Perform hands-on experimental work in the Product Development laboratory, including batching, blending, encapsulation, and related lab-scale processes., • Utilize analytical instrumentation such as gas chromatography (GC), high-performance liquid chromatography (HPLC), and inductively coupled plasma mass spectrometry (ICP-MS) to support formulation development and analytical chemistry needs., • Support quality control activities by evaluating raw materials, intermediates, and finished products, including those involving fish oils and other nutraceutical ingredients., • Evaluate laboratory capabilities, identify opportunities for future R&D expansion, and recommend new technologies, methods, or equipment to enhance innovation., • Contribute to new product development projects from concept through commercialization, including experimental design, data analysis, and documentation., • Collaborate effectively with a predominantly Spanish-speaking laboratory team, using translation tools as needed to maintain clear communication and teamwork., • Maintain accurate records of experiments, methods, and results in accordance with internal procedures and good laboratory practices., • Work cross-functionally with Quality, Manufacturing, and other internal stakeholders to ensure formulations are scalable and suitable for production., • Bachelor’s degree in Food Science, Chemistry, or a related field., • 3+ years of R&D formulation experience, preferably in nutraceuticals or dietary supplements., • Proven expertise in formulation of powders, liquids, and tablets., • Bilingual skills, particularly Spanish, are a plus but not required., • Interest in purpose-driven work focused on high-quality, ethically sourced, and sustainable products. 401K, holiday, vacation and sick time offered to internal employees. Will have potential to grow into a leadership role - the R&D department is new and there will be room to expand to R&D formulators that report to them. Workplace Type This is a fully onsite position in Clifton,NJ. Application Deadline This position is anticipated to close on May 6, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job Description About Mendon Mendon Truck Leasing & Rental is a full-service commercial truck leasing and maintenance company serving fleet customers throughout the region. Our Newark branch supports a high-volume diesel operation focused on safety, reliability, and keeping our customers on the road. We are currently hiring two experienced diesel mechanics — one for our AM shift and one for our PM shift — to join our Newark team. This is a Union 447 position commercial diesel repair role. We are seeking technicians with hands-on heavy-duty or fleet diesel experience. What You’ll Do Depending on classification (Class A or Class B), responsibilities include: • Diagnose and repair diesel engines and related systems, • Perform transmission, driveline, and differential repairs, • Service steering, suspension, brake, axle, frame, electrical, hydraulic, and refrigeration systems, • Complete preventive maintenance inspections, • Read and interpret job orders, • Accurately document repairs using computer-based repair order systems, • Test drive commercial vehicles to verify repairs (CDL license), • Perform roadside service when required Class A mechanics work independently on complex diagnostics and repairs with limited supervision. Class B mechanics perform most repairs with direction and support on more advanced assignments. Qualifications • Proven heavy-duty diesel truck experience required, • Strong diagnostic and troubleshooting skills, • Ability to communicate clearly, verbally and in writing, • Comfortable using a computer to complete repair documentation, • Valid driver’s license required, • CDL preferred (role includes operating commercial vehicles for testing and roadside service), • Must provide own tools Compensation Union 447 wage scale: Class B base rate: $33-34 per hour Class A base rate: $35-36 per hour First-year wage structure per union agreement: • First 6 months: $1.00 below base rate, • Months 7–12: $0.50 below base rate, • Full base rate after 12 months Schedule/ Location Newark, NJ AM Shift: 6:00 AM – 2:30 PM (1 opening) PM Shift: 1:30 PM – 10:00 PM (1 opening) Benefits Union benefits include: • Generous paid time off, • Group insurance plans, • Boots and Tools reimbursement Why Join Mendon This is a stable, long-term opportunity within a structured union environment. Our Newark shop is busy, hands-on, and team-oriented. If you take pride in quality diesel repair work and want steady employment with strong benefits, we would welcome the conversation. WORKING CONDITIONS: Shop, office, yards, vehicle environment, may require lifting of 50 to 75 lbs. CDL driving AM Shift: 6:00 AM – 2:30 PM (1 opening) PM Shift: 1:30 PM – 10:00 PM (1 opening)

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview This position is responsible for various aspects of Quality Control. Job Responsibilities and Essential Duties • Perform inspection and/or test of mechanical and electrical components and assemblies per written procedures using tools such as calipers, micrometers, and other gages, as well as visual inspection of Printed Circuit Board Assemblies (PCBA)., • Document test and inspection results following good documentation practices., • Aid in the return of material to supplier, to stock, or to the Production floor through the MRB/NCMR process., • Disposition material as acceptable or not acceptable based on results of inspection, testing, and/or workmanship., • Provide support to SQEs by inspecting all material requiring PPAP (Production Parts Approval Process) and providing feedback if material is not in accordance to specifications., • Inspection of Collagen Product., • Responsible for the inspection and acceptance or rejection of material reworked by Operations, following the instructions submitted on the rework NCMR paperwork., • Provide feedback to cross-functional teams on procedural issues that would need update to conform to SOPs. Minimum Requirements • 2 years technical school or equivalent experience., • 3 years minimum experience with production and/or quality control inspection/testing., • Quality Control inspection experience, • Ability to follow written and verbal test and inspection instructions in English, • Ability to interpret mechanical drawings, • Ability to record data and written information in English, • Ability to inspect/test a wide variety of product types, • Ability to travel between multiple sites in order to conduct inspections., • The ability to use Microsoft Windows and Office products such as Word, Excel or equivalent software applications. Salary range: $27.00- $30.00 p/hr., depending upon experience and location-hourlyrolewith multiple locations #LI-MV1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

With a passion for life Join our diverse teams of passionate people and a career that allows you to develop both personally and professionally. At Getinge we exist to make life-saving technology accessible for more people. To make a true difference for our customers - and to save more lives, we need team players, forward thinkers, and game changers. Are you looking for an inspiring career? You just found it. Job Overview The Senior Compliance Engineer is responsible for ensuring that Cardiac Assist electromechanical medical devices meet all applicable global regulatory, quality, and safety requirements throughout their lifecycle. This role provides technical leadership across product safety, electrical safety, design control compliance, labeling and safety markings, environmental/material compliance (RoHS/REACH), and global marketaccess requirements, ensuring products remain aligned with stateoftheart expectations. The Senior Compliance Engineer serves as a critical interface between Engineering, Quality, Regulatory Affairs, Supplier Quality, and Manufacturing, ensuring that product designs, sustaining engineering activities, and change initiatives remain auditdefensible, traceable, riskbased, and compliant across international markets. Job Responsibilities and Essential Duties • Lead compliance evaluations for new designs, design changes, sustaining engineering, and remediation activities., • Interpret and apply global standards including IEC 606011 series (electrical safety), IEC 6060118, IEC 60601112, EN 1789, GB 9706 series, UL/CSA, and other applicable international product and safety requirements., • Support development and verification of labeling, product safety markings, regional electrical requirements, and marketspecific compliance deliverables (EU MDR, FDA, China, LATAM)., • Conduct compliance impact assessments during design reviews, ensuring requirements, risks, verifications, and mitigations are aligned with global expectations., • Ensure compliance documentation is complete, consistent, and auditready (DHF/Technical File), including traceability, risk management, verification and validation records, and certification artifacts., • Provide guidance on environmental and material compliance (RoHS, REACH, China RoHS) and ensure supplier documentation meets regulatory expectations., • Support CAPA investigations that require compliance input, including evidence review, standards interpretation, and riskbased justification., • Maintain awareness of emerging regulatory changes and stateoftheart updates; drive integration into engineering processes and technical documentation, and identifying required retesting with recognized third party test labs., • Support global regulatory submissions (510(k), EU MDR Technical Documentation, and regional registrations) with compliance rationale and evidence., • Collaborate with Supplier Quality and Procurement to evaluate compliance of purchased components, including safetycritical and regulated materials., • Support internal and external audits, inspections, and technical inquiries, ensuring timely, accurate, and welldocumented responses., • BS in Systems, Biomedical, Electrical, or Software Engineering with 8+ years of related experience, • MS or PhD in Systems, Biomedical, Electrical, or Software Engineering with 6+ years of related experience, • Demonstrated experience working with relevant medical device regulatory and productsafety standards (e.g., IEC 606011, ISO 14971, IEC/ISO environmental testing, labeling requirements, or international certification processes). Required Knowledge, Skills, and Abilities • Proven experience supporting compliance evaluation, maintenance, or certification of electromechanical medical devices., • Strong understanding of medical electrical safety (IEC 606011 series), product safety principles, risk management (ISO 14971), and global marketaccess requirements., • Working knowledge of FDA QMSR, ISO 13485, ISO 14971, EU MDR and related regulatory frameworks., • Ability to interpret technical compliance reports (e.g., electrical safety, environmental compliance, risk controls, labeling/marking evaluations), identify gaps, and guide engineering teams toward compliant solutions., • Strong analytical and problemsolving skills with ability to apply riskbased decision making., • Excellent verbal and written communication skills, including preparation of auditready technical documentation., • Ability to work crossfunctionally and communicate effectively with engineers, quality, regulatory, suppliers, and certification bodies., • Strong organizational skills with the ability to manage multiple priorities in a regulated environment., • Ability to participate in and lead technical meetings, design reviews, and compliancefocused assessments. Salary range: $120k - 135k #LI-LG1 About us With a firm belief that every person and community should have access to the best possible care, Getinge provides hospitals and life science institutions with products and solutions aiming to improve clinical results and optimize workflows. The offering includes products and solutions for intensive care, cardiovascular procedures, operating rooms, sterile reprocessing and life science. Getinge employs over 12,000 people worldwide and the products are sold in more than 135 countries. Benefits at Getinge: At Getinge, we offer a comprehensive benefits package, which includes: • Health, Dental, and Vision insurance benefits, • 401k plan with company match, • Paid Time Off, • Wellness initiative & Health Assistance Resources, • Life Insurance, • Short and Long Term Disability Benefits, • Health and Dependent Care Flexible Spending Accounts, • Commuter Benefits, • Parental and Caregiver Leave, • Tuition Reimbursement Getinge is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, genetic information, national origin, disability, protected veteran status or any other characteristic protected by law.Reasonable accommodations are available upon request for candidates taking part in all aspects of the selection process.

Job Description Title: Sr Electrical Engineer Location: Lodi, NJ Compensation: $120–150k Benefits: Medical, Dental, Vision, 401k matching, product discounts Overview: We’re hiring a Senior Electrical Engineer to play a key role in the full product development lifecycle of commercial-grade equipment, from concept and design through validation, production, and continuous improvement. This role combines hands-on testing, electromechanical troubleshooting, and cross-functional collaboration. You’ll partner closely with engineering, sourcing, marketing, sales, and production teams to ensure products meet real-world performance, reliability, and durability requirements. Job Duties: • Support electrical and electromechanical design throughout the full product development lifecycle, including concept, prototyping, validation, and production release., • Work with electromechanical components (motors, solenoids, sensors, etc.) across multiple product lines., • Lead product durability, performance testing, failure analysis, and continuous improvement initiatives., • Perform hands-on testing and validation in the Lodi workshop and provide technical guidance to in-house technicians., • Collaborate with overseas manufacturing partners to support design for manufacturability, quality standards, and production efficiency., • Conduct competitive benchmarking and translate findings into actionable design and performance improvements., • Create and maintain CAD models, schematics, and technical documentation using SolidWorks or Pro/Engineer (Creo)., • Provide cross-disciplinary troubleshooting support, including mechanical-focused issues when required., • Occasional travel (2–3 trips/year) for supplier visits, manufacturing support, and team collaboration. Qualifications: • 5–8 years of electrical or electromechanical engineering experience supporting mass-produced products., • Demonstrated experience working through the full product development lifecycle in a commercial or consumer product environment., • Background in rugged, commercial-grade, high-volume products., • Proficiency in SolidWorks or Pro/Engineer (Creo)., • Strong communicator with the ability to collaborate across engineering, manufacturing, and business teams., • Passion for designing and delivering durable, reliable, and high-performing products. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job DescriptionRole Overview: The Maintenance Electrician is responsible for installing, maintaining, and repairing industrial electrical systems, supporting both plant operations and construction-related projects. This role requires a strong understanding of low and high voltage systems, schematics, and NEC standards, along with hands-on experience in troubleshooting and system diagnostics. The ideal candidate brings experience with PLC systems, blueprint interpretation, and construction environments, ensuring safe and efficient operation of electrical equipment across multiple settings. Job Requirements: • Proven experience as an industrial or commercial electrician, with a strong background in electrical systems maintenance., • Solid understanding of NEC standards, schematics, blueprint reading, and wiring diagrams., • Experience working with low voltage and high voltage electrical systems., • Familiarity with programmable logic controllers (PLCs) for troubleshooting and automation support., • Experience using hand tools, power tools, multimeters, ohmmeters, and other testing equipment., • Exposure to construction site environments, including renovation projects., • Strong understanding of electrical installations and system layouts., • Comfortable working both independently and within a team in fast-paced environments., • Strong problem-solving skills and attention to detail when diagnosing electrical issues., • Ability to perform tasks involving standing, walking, and hands-on electrical work throughout the shift., • Frequent use of tools and equipment for installation, maintenance, and repairs., • Work performed in industrial facilities and construction sites., • Exposure to active electrical systems, tools, and equipment., • Install & Repair Electrical Systems: Install, troubleshoot, and repair electrical systems and components using appropriate tools and testing equipment., • Read & Interpret Technical Documents: Analyze schematics, blueprints, and wiring diagrams to perform accurate installations and repairs., • Maintain Electrical Systems: Support both low and high voltage systems while ensuring compliance with NEC standards., • Support PLC Systems: Program and troubleshoot PLC systems to maintain automation and operational efficiency., • Perform Preventive Inspections: Conduct routine inspections to identify and resolve potential issues before failures occur., • Support Construction & Renovation Projects: Assist with electrical work on construction and renovation projects, collaborating with other trades., • Ensure Safety Compliance: Follow all electrical codes, safety regulations, and company policies to maintain a safe work environment., • Use Tools & Equipment: Operate hand tools, power tools, and diagnostic equipment to complete tasks efficiently., • Document Work & Report Issues: Maintain records of maintenance activities and report system failures or safety concerns.