Trabajos electrical testing en Commack, New YorkCrear alertas

Job DescriptionJob Title: Electrical AssemblerJob Description Join a specialized aerospace production team as an Electrical Assembler, working on large electrical assemblies that serve as the control "brain" within jet engine housings. In this hands-on role, you assemble wire harnesses and chassis for complex aerospace components using a variety of precision tools and test equipment. You interpret schematics and blueprints to build high-quality electrical assemblies that meet stringent aerospace standards, with light soldering required but not as the primary focus. Responsibilities • Assemble large aerospace electrical components, including wire harnesses and chassis, used in jet engine housings., • Build and route cable and wire harness assemblies according to electrical schematics and blueprints., • Use hand tools such as crimpers, strippers, micrometers, multimeters, and heat guns to prepare, terminate, and verify electrical connections., • Perform light soldering on electrical and electronic components as required by assembly instructions., • Read and interpret electrical schematics, wiring diagrams, and blueprints to ensure accurate assembly and wiring layouts., • Install and secure electrical components, cables, and harnesses within chassis and housings to meet mechanical and electrical requirements., • Inspect assemblies for quality, accuracy, and completeness, verifying that all connections, terminations, and components meet specifications., • Handle, move, and position assemblies and components safely, including lifting items up to 50 lbs as needed during the build process., • Follow established production processes, work instructions, and aerospace assembly standards to maintain consistency and reliability., • Use multimeters and other test equipment to perform basic continuity checks and confirm proper electrical connections., • Maintain a clean, organized, and safe work area, ensuring tools and equipment are used and stored properly., • Collaborate with team members and leads to resolve assembly issues and continuously improve build quality and efficiency.Essential Skills, • Hands-on experience with electrical assembly, including wire harness and cable assembly., • Proficiency in reading and interpreting electrical schematics, wiring diagrams, and blueprints., • Demonstrated ability to perform wire harness assembly for complex electrical systems., • Experience with chassis assembly, including mounting and routing electrical components and harnesses., • Proficient use of hand tools such as wire strippers, crimpers, micrometers, multimeters, and heat guns., • Ability to perform light soldering on electrical and electronic components., • Capability to lift and handle components and assemblies up to 50 lbs safely., • Familiarity with electrical and electronic assembly practices in a production environment., • Strong attention to detail and accuracy when following technical instructions and documentation., • Comfort working with both electrical and mechanical aspects of large assemblies.Additional Skills & Qualifications, • Experience in aerospace electrical assembly or large-scale electrical assemblies., • Background in assembling complex housings or control units for industrial or aerospace applications., • Exposure to electronic assembly processes and quality standards., • Mechanical aptitude for working with chassis, housings, and structural components., • Ability to perform basic electrical testing using multimeters and related equipment., • Experience working in a structured production or manufacturing environment with defined processes and standards.Why Work Here? You join a team that contributes directly to highly engineered aerospace systems, working on complex and technically interesting products that have a tangible impact. The environment supports the development of strong hands-on skills with professional-grade tools and equipment, offering opportunities to deepen your expertise in electrical assembly and aerospace standards. You work alongside experienced technicians and assemblers who value precision, quality, and safety, in a setting that emphasizes reliability, craftsmanship, and continuous improvement. Work Environment This role is based in an aerospace assembly workroom focused on large electrical and mechanical assemblies for jet engine-related components. You work on production lines and dedicated assembly stations using tools such as crimpers, wire strippers, micrometers, multimeters, heat guns, and soldering equipment. The environment is structured, process-driven, and quality-focused, with clear work instructions and documentation to follow. You handle and move components that can weigh up to 50 lbs, and you may stand for extended periods while performing detailed assembly tasks. The facility operates as a technical production setting where adherence to safety procedures, proper tool usage, and organized work practices is essential, and attire is appropriate for a hands-on manufacturing and assembly environment. Job Type & Location This is a Contract to Hire position based out of Commack, NY. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Commack,NY. Application Deadline This position is anticipated to close on Aug 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description HVAC & Plumbing Service Technician Company Overview We are a growing, customer-focused home services company launching a new HVAC and Plumbing Service Division. Our mission is to provide exceptional service, quality workmanship, and reliable solutions for residential and light commercial customers. We are seeking experienced, motivated, and professional technicians who want to grow with a company that values integrity, craftsmanship, and customer satisfaction. Position Summary The HVAC & Plumbing Service Technician will be responsible for diagnosing, repairing, maintaining, and installing HVAC and plumbing systems in residential and light commercial properties. The ideal candidate is a self-starter with strong technical skills, excellent customer service abilities, and a commitment to delivering high-quality work. This is an excellent opportunity to join a growing division and play a key role in building a premier service department. Responsibilities HVAC Duties • Diagnose and repair residential and light commercial heating, ventilation, and air conditioning systems., • Perform preventative maintenance and seasonal inspections., • Install HVAC equipment, including furnaces, boilers, air conditioners, heat pumps, mini-split systems, and related components., • Troubleshoot electrical, mechanical, and refrigerant-related issues., • Perform system performance testing and recommend solutions to improve efficiency., • Ensure compliance with local codes and manufacturer specifications. Plumbing Duties • Diagnose and repair plumbing systems, fixtures, water heaters, boilers, pumps, and piping systems., • Perform drain cleaning and troubleshooting., • Install and replace water heaters, fixtures, piping, and plumbing components., • Identify leaks and recommend repair solutions., • Conduct inspections and preventative maintenance., • Ensure all plumbing work meets local and state codes. Customer Service & Operations • Communicate findings and repair recommendations clearly to customers., • Provide estimates and explain service options., • Complete service reports and documentation accurately., • Maintain company vehicle, tools, and equipment., • Participate in on-call rotation as needed., • Follow all safety procedures and company policies. Qualifications Required • Minimum 3 years of HVAC and/or plumbing service experience., • Valid driver's license with a clean driving record., • Strong troubleshooting and diagnostic skills., • Ability to work independently and manage daily service calls., • Excellent communication and customer service skills., • Ability to lift 50+ pounds and work in various weather conditions and confined spaces. Preferred • EPA Certification., • HVAC certifications (NATE, HVAC Excellence, etc.)., • Plumbing license or apprenticeship experience., • Experience with boilers, hydronic systems, tankless water heaters, and heat pumps., • Experience using service management software and mobile field applications. Compensation & Benefits • Competitive hourly pay based on experience, • Overtime opportunities, • Company vehicle (if applicable), • Paid holidays and paid time off, • Uniforms provided, • Ongoing training and professional development, • Career advancement opportunities, • Supportive team environment Why Join Us? We are building something special. This is an opportunity to join our HVAC and Plumbing Division from the ground up and help shape its future success. We value our employees, invest in training, reward performance, and provide opportunities for long-term career growth. Apply today and become part of a company committed to excellence, customer satisfaction, and professional development.

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • Communicate clearly and effectively with internal and external representatives, including management, customer reps, FAA inspectors, airline inspectors and similar (training provided). Experience and Skills • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • Electrical or Mechanical aptitude and hands-on experience. Machinist experience a plus. Physical Requirements • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • Use of chemicals for cleaning, lubricating and painting Education • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • A&P certificate is not required (but it is a plus). Compensation • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32), • We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us PG Aerotech is an equal opportunity employer. Visit our website at PG Aerotech | Jet Parts Engineering Requirements: Compensation details: 24-32 Hourly Wage PI3c469407d0d6-25405-38954662

Job DescriptionPart Time Electrical Engineer needed for preparing prototypes and testing. Power electronics experience helpful. Retirees welcome. Full Time electrical engineers who want to supplement main income also welcome. minimum 3-5 years experience Competitive Hourly rate. Ronkonkoma Office (near ISP airport). Need to start ASAP.

Job Description A confidential, industry-leading RF/microwave manufacturer is looking for an experienced RF Amplifier Design Engineer to design, develop, and test low noise and medium power amplifiers using both discrete transistor and MMIC technologies. You’ll work across hybrid and surface-mount designs, run linear and nonlinear simulations, support production, and contribute directly to new product development. This is a hands-on engineering role with real visibility inside the organization. What You’ll Do Design, develop, and test discrete and MMIC-based low noise/medium-power amplifiers Build new RF and microwave circuits, components, and products Perform linear and nonlinear simulations for active and passive circuits Define specs for microwave components and subassemblies Support high-reliability testing and screening requirements Generate design reviews, test reports, and documentation Work with manufacturing teams to ensure efficient build processes Estimate project schedules, track engineering labor, and support technical proposals What You Need Bachelor’s in Electrical Engineering with 4+ years experience, or Master’s with 2+ At least 2 years designing and simulating low noise amplifiers Experience designing passive RF/microwave components (couplers, dividers, attenuators) Experience designing for manufacturability and managing engineering projects Proficient with linear CAE tools plus exposure to nonlinear CAE Hands-on lab/test experience: VNAs, noise figure analyzers, spectrum analyzers, power meters, signal generators Ability to work under a microscope in a cleanroom environment Familiarity with semiconductor devices like GaAs and GaN Strong communication skills Must be able to obtain a Secret-level security clearance Preferred Experience Familiarity with MIL-specs: MIL-PRF-38534, MIL-STD-202 Experience aligning and tuning fine-pitch circuits under a microscope Knowledge of oscillator, synthesizer, PIN-diode, and filter design System-level cascade and spur analysis Proficiency with Keysight ADS, RFPro, Ansys HFSS, and EM simulation tools CAD familiarity: AutoCAD, Inventor Design/test experience up to 26 GHz or higher (40 GHz preferred) Hybrid chip-and-wire and PCB SMT manufacturing exposure Wire bonding experience

Job DescriptionJOB SUMMARY: This position is responsible for troubleshooting and performing major mechanical repairs with minimal supervision to ensure proper performance of equipment on site, including motors and refrigeration rooms to maximize up time. Training of staff as required and coordinating with other mechanics on duty for repairs and ensuring all assigned work is timely completed. ESSENTIAL RESPONSIBILITIES & ACCOUNTABILITIES: • Troubleshoot and repair industrial production equipment, electrical systems, and mechanical components., • Diagnose equipment failures using electrical schematics, technical manuals, PLC diagnostics, and testing equipment., • Perform preventive, predictive, and corrective maintenance on manufacturing equipment., • Troubleshoot PLC-controlled systems, sensors, motors, VFDs, and industrial controls., • Install, maintain, and replace electrical components including:, • 3-phase motors, • VFDs (Variable Frequency Drives), • Motor starters, • Power supplies, • Relays and contactors, • Proximity sensors and photo eyes, • Read and interpret electrical schematics, wiring diagrams, blueprints, and OEM documentation., • Troubleshoot pneumatic and hydraulic systems., • Maintain conveyor systems, packaging equipment, and automated production machinery., • Complete work orders and maintenance documentation through the CMMS system., • Coordinate repairs with production and maintenance teams to minimize downtime., • Communicate with equipment manufacturers and vendors as needed for technical support., • Follow all OSHA, food safety, GMP, and company safety requirements.QUALIFICATIONS:, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to measure size and dimension by means of calipers and to interpret bar graphs., • Proficient in electrical installations, maintenance and repair in all settings., • Must be able to operate industrial forklifts, equipment or tools.EDUCATION/EXPERIENCE:Required, • Minimum 5 years of Electro-Mechanical Maintenance experience in an industrial manufacturing environment., • Strong troubleshooting experience with:, • PLC-controlled equipment, • Industrial electrical systems, • Pneumatics and hydraulics, • Motors and motor controls, • VFDs and industrial automation, • Experience working with 24VDC, 120V, 240V, and 480V electrical systems., • Ability to read and interpret electrical schematics and technical drawings., • Experience using electrical testing equipment such as multimeters and diagnostic tools., • Ability to work independently with minimal supervision., • Strong root-cause analysis and problem-solving skills.Preferred, • Experience with Allen Bradley PLCs, RSLogix, or Studio 5000., • Associate's or Bachelor's degree in Electro-Mechanical Engineering, Electrical Engineering, Mechatronics, Industrial Automation, Electronics Engineering, or related technical field., • Food manufacturing, bakery, packaging, beverage, or pharmaceutical manufacturing experience., • Experience with CMMS systems., • Associate's degree or technical certification in Electrical, Electronics, Mechatronics, Industrial Maintenance, or related field. #Eurohigh #EuroUrgent

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Maintain documentation: requirements, verification plans, traceability, and anomaly reports. Requirements • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Strong problem-solving and systems-thinking skills; ability to lead integration and verification in a startup setting. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. We are seeking a highly skilled Senior Engineering Technician to join our Operations team in a fast-paced RF and Microwave manufacturing environment. This hands-on role is ideal for an experienced technician with a strong background in testing, tuning, troubleshooting, and manufacturing advanced RF products. The successful candidate will support the production of RF, microwave, millimeter-wave, and frequency conversion products, ranging from discrete components through integrated subsystems. Working closely with Design Engineering, Manufacturing Engineering, Quality, and Operations, this individual will play a key role in solving complex technical challenges, supporting new product introduction, improving manufacturing processes, and ensuring the successful delivery of high-performance products. The ideal candidate is technically strong, enjoys solving difficult RF problems, thrives in a collaborative environment, and continuously looks for opportunities to improve product quality, manufacturing performance, and operational efficiency. Essential Functions: Technical Responsibilities • Test, tune, troubleshoot, characterize, and validate RF, microwave, millimeter-wave, and frequency conversion products from discrete components through fully integrated subsystems., • Perform RF and microwave characterization, tuning, troubleshooting, and acceptance testing using advanced RF test instrumentation, including PNA/PNA-X network analyzers, spectrum analyzers, signal generators, oscilloscopes, power meters, noise figure analyzers, RF sources, and automated test systems., • Diagnose complex RF performance issues, analyze test data, and determine root causes using sound engineering principles and measurement techniques., • Perform electrical alignment and optimization of RF assemblies to meet product performance specifications., • Read and interpret engineering drawings, schematics, wiring diagrams, specifications, and manufacturing documentation., • Perform precision assembly and troubleshooting using microscopes and miniature hand tools. Engineering & Product Development • Partner with Design and Manufacturing Engineering to support prototype builds, First Article Inspection, New Product Introduction, and production readiness., • Support engineering investigations by recommending design, test, or manufacturing improvements that enhance product performance, manufacturability, reliability, and quality., • Develop and improve manufacturing fixtures, test methods, and standardized work instructions to increase repeatability and production efficiency. Manufacturing Excellence • Drive Lean Manufacturing and Continuous Improvement initiatives focused on improving first-pass yield, reducing cycle time, increasing throughput, and eliminating waste., • Support root cause investigations and corrective actions for manufacturing and customer-return issues., • Work across multiple manufacturing departments to resolve technical challenges and support production priorities while maintaining the highest standards of quality and safety. Technical Leadership • Mentor and support junior technicians by providing technical guidance on new products, manufacturing processes, RF test equipment, troubleshooting techniques, and best manufacturing practices., • Maintain accurate manufacturing records, test documentation, and production data in accordance with company procedures and quality standards. Qualifications • High School Diploma or equivalent with 8+ years of related experience, or an Associate's Degree in Electronics, Electrical Engineering Technology, or a related technical discipline with 4+ years of relevant experience., • Extensive experience testing, tuning, troubleshooting, and characterizing RF, microwave, millimeter-wave, or frequency conversion products., • Strong understanding of RF and microwave theory, measurements, and applications., • Experience troubleshooting RF hardware from discrete component level through integrated subsystem level., • Proficiency in using advanced RF test equipment, • Ability to analyze RF test results and determine the root cause of electrical performance issues., • Ability to read and interpret engineering drawings, electrical schematics, and manufacturing documentation., • Strong analytical, troubleshooting, and problem-solving skills., • Excellent manual dexterity and experience working under a microscope with miniature RF components., • Strong communication skills with the ability to collaborate effectively across Engineering, Manufacturing, Quality, Planning, and Operations., • Experience supporting New Product Introduction and transitioning products into production., • Experience in aerospace, defense, or other high-reliability manufacturing environments., • Working knowledge of Lean Manufacturing, Continuous Improvement, Kaizen, Root Cause Analysis, or Six Sigma methodologies., • Experience identifying and implementing process improvements that improve quality, manufacturing efficiency, and throughput., • Familiarity with ERP/MRP systems and manufacturing documentation., • Active Secret Clearance or the ability to obtain and maintain one. Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job Description Job Description • The Test Technician is responsible for performing functional testing of electronic products and assemblies to ensure compliance with specification, quality standards and requirements., • The ideal candidate will troubleshoot assemblies to the component level, performing electrical and environmental testing, and contributing to failure analysis and corrective actions., • The Test Technician is analytical, detail‐oriented, and experienced with analog/digital circuitry in a fast‐paced manufacturing environment., • Perform electrical, functional, and environmental testing on assemblies, subassemblies, and finished products, • Troubleshoot electronic systems to the component level and identify root‐cause failures, • Read and interpret schematics, wiring diagrams, assembly drawings, and technical procedures, • Conduct testing on switching power supplies and high‐voltage products (>400VAC preferred), • Use standard lab equipment: oscilloscopes, DMMs, power analyzers, electronic loads, power supplies, • Document test results, failures, repairs, and corrective actions accurately, • Collaborate with Engineering, Quality, and Production to resolve technical issues and improve reliability, • Support failure analysis, rework, and compliance verification activities Requirements • Associate degree in Electronics/Electrical Technology or equivalent technical training, • Minimum 2 years of experience as a Test Technician or similar role in manufacturing, • Experience with analog/digital circuits and switching power supplies, • Knowledge of electrical/electronic testing methods and industry‐standard equipment, • Ability to follow documented test procedures and work independently with minimal supervision, • Strong troubleshooting, communication, organization, and documentation skills, • Proficiency with Microsoft Office, • Must be a U.S. Citizen or Permanent Resident (ITAR compliance), • Experience in aerospace, defense, military, or other regulated industries, • Familiarity with IPC standards and electronic assembly practices, • Background in root‐cause analysis, corrective actions, and quality systemsCompany DescriptionOur client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.Our client is a reputable manufacturing company offering a permanent opportunity, competitive salary and great benefits.

Job DescriptionDescription: Job Description The individual will be doing hands-on repair, assembly, soldering, or re-manufacture of mechanical and electromechanical components utilizing company provided approved data. The technician will be responsible for testing, troubleshooting, and repairing electrical, electromechanical, and machined assemblies sent in for repair evaluation by our customers. Training, technical documents, and oversight are provided by PG Aerotech management. Essential Responsibilities • Test and repair aircraft components in accordance with company provided data (manuals, drawings, procedures, etc.) and company provided training., • Maintain a clean, clutter-free work area., • Correctly, concisely, and legibly fill out all company forms and reports as required by management (both written and online)., • Work with co-workers to achieve goals and objectives set by management., • Work with management to develop new processes and procedures as necessary., • Assist in basic shop upkeep and maintenance including routine cleaning of the technician’s work area and periodic shop maintenance assignments., • Communicate clearly and effectively with internal and external representatives, including management, customer reps, FAA inspectors, airline inspectors and similar (training provided). Experience and Skills • The ability to pass a pre-employment and random drug and alcohol screenings as well as a basic background check., • 2 or more years of similar or related work experience; similar experience in aviation, automotive, marine, electronics, or low-voltage electric repair will be considered., • Technician candidate must own his or her own set of basic hand tools., • Applicant must have at the least a moderate level of experience and proficiency with general electrical soldering and/or circuit board level soldering., • The ability to follow instructions and work to a written procedure concisely and accurately., • Must be fluent in speaking, reading and writing English., • Applicants must be able to read and thoroughly understand technical drawings, blueprints, manuals, and instructions. A pre-employment technical skills and comprehension test may be required., • Interested individuals must be detail-oriented, self-motivated, and highly organized., • Experience using a computer., • Punctual and reliable., • Valid driver’s license., • Electrical or Mechanical aptitude and hands-on experience. Machinist experience a plus. Physical Requirements • The ability to lift up to 20 lbs., • Manual dexterity (must be able to hold certain components with one hand while moving tools around with the other), • Constant hand manipulation of small to medium, • Sitting or standing for long periods of time, • Frequent use of hand tools and other repair equipment, • Use of chemicals for cleaning, lubricating and painting Education • High school diploma or GED is required., • Associates degree or higher in a related technical field preferred., • Trade schooling or related industry experience required., • A&P certificate is not required (but it is a plus). Compensation • Hourly position commensurate with experience and skill level and/or certifications. ($24 - $32), • We offer medical, dental, vision, life and other insurance options; 401k with 100% match on first 4%; full time workers get paid holidays, vacation & sick/personal leave accrued on hire date. About Us PG Aerotech is an equal opportunity employer. Visit our website at PG Aerotech | Jet Parts Engineering Requirements:

Job Description Retlif Testing Laboratories is looking to hire a full-time experienced Technical Sales Representative to join our Ronkonkoma, New York laboratory to support sales efforts for our Electromagnetic Compatibility (EMC) testing laboratory and our Environmental Simulation (ESS) testing laboratory. This position is responsible for inside and outside sales, as well as sales activities throughout Long Island, Metro New York City and Retlif's PA and NH facilities. Do you have a background in the commercial aviation sector and/or the military defense sector and want a career, not just a job? This position earns competitive pay, $100,000-$130,000 based on experience. We also offer excellent benefits, including medical, dental, vision, a matching 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program. If this sounds like the right opportunity for you, consider applying today! ABOUT RETLIF TESTING LABORATORIES An industry leader for over 45 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers in such industries as aerospace, rail, maritime, military, defense, and medical. Retlif provides electromagnetic compatibility, radio approval, product safety, and environmental simulation testing to national and international standards. We pride ourselves on providing exceptional customer service. We have a loyal and long-standing customer base that appreciates our commitment to the highest quality in testing and engineering services. Our mission is to fully address the testing and compliance needs of our clients. As a team member at one of the USA's leading independent testing laboratories, you can expect excellent personal growth opportunities, a professional atmosphere, and comprehensive employee benefits. We are an equal opportunity employer that values each member of our team. A DAY IN THE LIFE OF A TECHNICAL SALES REPRESENTATIVE As a Technical Sales Representative, you are a critical member of our team. You provide administrative support and customer coordination and activities to Technical Sales. You support and maintain positive business and customer relationships through quotation and sales follow-ups, appointment scheduling and trade show support. You also utilize and monitor our company quote tracking system. You get great satisfaction out of helping our company with sales and supporting the needs of our customers! RESPONSIBILITIES • Support company at trade shows., • Quotation and sales follow-ups and appointment scheduling., • Monitoring and prioritizing daily sales activities., • Support of sales at all 3 Retlif facilities, which includes travel., • Innovative, proactive strategies to meet the company's annual sales goal. QUALIFICATIONS • Minimum four (4) year college degree preferred: BS Electrical Engineering, BS Mechanical Engineering or related focus, Communications, Marketing., • Required: Minimum of 5-7 years' experience working in commercial aviation and/or military defense sector, testing and selling professional or technical services., • Excellent verbal, written communication and presentation skills., • Proficient in Microsoft Office Suite., • Available to travel primarily throughout Long Island and Metro NYC, as well as periodic trips in support of our NH and PA facilities (approximately 15-20% travel)., • Candidates must have a background that would permit the U.S. Department of Defense to issue a Secret Clearance, which includes U.S. Citizenship. Are you organized and attentive to detail? Do you have strong interpersonal and communication skills, both written and verbal? Can you effectively prioritize multiple tasks in order to meet strict deadlines? Do you thrive in a fast-paced environment? If so, you might just be perfect for this Sales Associate position! WORK SCHEDULE This full-time Technical Sales Representative job is Monday - Friday, 8:00 AM - 5:00 PM. Additional hours may be necessary at times, depending on customer needs and travel requirements. READY TO JOIN OUR TEAM? We understand your time is valuable, and that is why we have a very quick and easy application process. If you feel that you would be right for this Technical Sales Representative job, please fill out our mobile-friendly application. We look forward to meeting you! Job Posted by ApplicantPro

Job Description On-Site, Hauppauge, NY Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in more than 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be an exhaustive list of all essential functions, duties, or skills required for this role. Management retains the discretion to add or change the duties at any time. Job Description We are seeking a highly motivated and technically strong Application Engineer to play a strategic technical role expanding and supporting the adoption of Narda Safety Test Solutions (Narda STS) product lines throughout the United States. Narda STS, based in Germany, is a global leader in RF test & measurement, EMF safety, spectrum monitoring, interference hunting, and EMC/EMI analysis. This position focuses on expanding Narda’s presence across key U.S. markets, including military and defense, government agencies, aerospace, telecommunications, and industrial customers. In this role you will act as the technical authority for Narda products in the U.S., providing end-to-end support, from pre-sales consulting and product demonstrations to application development and post-sales assistance. A critical part of this role includes collaborative technical engagement and brainstorming with customers, including military program offices, system integrators, and field engineers, to help identify mission requirements, design technical use cases, and propose innovative solutions using Narda STS equipment. Key Responsibilities Customer & Applications Engineering • Serve as the primary technical expert for Narda STS equipment including EMF meters, spectrum analyzers, RF interference detectors, RF direction finders, and spectrum monitoring systems., • Conduct product demonstrations for commercial, government, and U.S. military customers (onsite, virtual, and at trade shows)., • Work with customers to design test methods, solve operational challenges, and optimize their use of Narda products., • Engage in brainstorming sessions with defense and enterprise clients to develop application concepts, system configurations, and mission-specific use cases., • Provide Tier 1/Tier 2 technical support and coordinate with engineering teams in Germany for advanced issues., • Create and deliver training, application notes, usage guides, and technical presentations. Sales Engineering & Business Development • Support sales initiatives by identifying customer needs and recommending the proper Narda STS solution set., • Prepare customized proposals, technical quotes, and configuration packages., • Support federal and military acquisition processes including RFP/RFQ responses., • Build strong relationships with key accounts in the defense, aerospace, telecom, and industrial sectors., • Participate in field evaluations, pilot programs, and product qualification activities with military stakeholders. Market & Product Insight • Collect customer feedback to help guide new product features, development, and roadmap discussions with Narda STS headquarters., • Maintain expertise in RF measurement, EMF regulations, spectrum-monitoring practices, and military-relevant standards., • Track market trends and competitive products to support strategic planning. Travel Requirements • Frequent domestic travel for customer visits, demonstrations, training sessions, field support, and events., • Occasional travel to Germany for product training and technical alignment with Narda STS teams. Qualifications Required • Bachelor’s degree in Electrical Engineering, RF Engineering, Physics, Communications Engineering, or equivalent technical experience with RF systems., • 2+ years in RF test & measurement, spectrum analysis, EMC/EMI, or similar technical field., • Strong understanding of RF concepts (modulation, spectrum behavior, antennas, interference, propagation)., • Proven customer-facing experience in pre-sales engineering, applications support, system integration, or field engineering., • Ability to lead technical discussions and explain complex concepts clearly., • Active U.S. Government security clearance preferred; candidates must be eligible to obtain and maintain a government clearance. Preferred • Experience supporting U.S. military customers, defense contractors, or federal agencies., • Experience with Narda STS or comparable RF instrumentation (Keysight, Rohde & Schwarz, Anritsu, Wavecontrol, etc.). Personal Attributes • Strong technical curiosity and problem-solving abilities., • Comfortable brainstorming technical ideas and application scenarios with customers., • Self-starter with excellent organizational and communication skills., • Ability to work independently in a remote environment while coordinating across time zones. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionDescription: The Field Engineer is a highly technical, field-based role responsible for supporting the installation, commissioning, startup, testing, and operational performance of industrial standby and prime power generation systems. This role plays a critical part in ensuring generator systems, paralleling switchgear, automatic transfer switches (ATS), and control systems are installed, commissioned, and operating safely, reliably, and in accordance with design specifications. The Field Engineer works closely with Project Managers, Field Service Technicians, electrical contractors, and customers to deliver high-quality power system installations across Kinsley’s Northeast service territory. Installation Review & Field Execution: • Review electrical one-lines, wiring diagrams, control schematics, and submittals to ensure proper field execution., • Support installation teams in identifying scope gaps, constructability issues, and technical discrepancies., • Conduct site visits to monitor installation progress and document deficiencies. Generator Commissioning & Startup: • Develop and execute pre-functional and functional startup checklists., • Lead commissioning of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • Automatic Transfer Switches (ATS), • Load banks and associated controls, • Document commissioning results and provide turnover packages. Troubleshooting & Technical Support: • Diagnose and resolve complex electrical, mechanical, and control-related issues during startup and post-installation., • Support Field Service Technicians with advanced troubleshooting., • Analyze generator performance data to identify reliability concerns., • Assist in root cause analysis of system failures. Controls & Integration: • Support configuration and testing of:, • Generator controllers, • Paralleling logic and synchronization systems, • Remote monitoring systems, • Ensure proper integration of generators into facility electrical infrastructure. Customer Interface & Training: • Serve as the technical lead during startup and commissioning., • Provide customer training on system operation, emergency procedures, and maintenance requirements., • Deliver clear commissioning documentation and test reports., • Ensure smooth transition from installation to service support. Qualifications: • Equivalent field experience considered., • Experience in industrial generator systems, power distribution, or mission-critical backup power environments., • Strong knowledge of:, • Diesel and natural gas generator systems, • Paralleling switchgear, • ATS systems, • Load bank testing, • Engine controls and protection systems, • Working knowledge of NEC, NFPA 110, OSHA standards., • Proven ability to troubleshoot complex power systems in live environments., • Strong communication and leadership skills in field settings., • Valid driver’s license required. Travel & Working Conditions: • Significant travel within Kinsley’s service territory, • Work performed in hospitals, data centers, industrial facilities, utilities, and construction environments., • Exposure to energized electrical systems, mechanical equipment, and outdoor conditions., • Ability to lift up to 100 lbs and work in physically demanding environments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or national origin. Requirements:

Job DescriptionConfidential RF / Digital Electrical Engineer Confidential Client | Long Island, NY Area A growing technology and defense-focused engineering organization is seeking an RF / Digital Electrical Engineer to support the design, development, testing, and integration of advanced electronic systems. This position offers the opportunity to work on cutting-edge RF, microwave, digital, and embedded technologies in a collaborative engineering environment. Position Overview The RF / Digital Electrical Engineer will be responsible for the design, analysis, development, and testing of RF and digital electronic circuits and systems. The role requires a hands-on engineer who can take products from concept through prototype, test, and production while supporting multidisciplinary engineering teams. Key Responsibilities • Design, analyze, and develop RF, microwave, and digital electronic circuits and subsystems., • Perform circuit modeling, simulation, optimization, testing, and troubleshooting., • Develop schematics, wiring diagrams, and technical documentation., • Support hardware integration, breadboard development, debugging, and verification testing., • Plan and execute laboratory testing, evaluate performance results, and implement design improvements., • Collaborate with engineering technicians, designers, and cross-functional teams throughout product development., • Assist with component selection, specialized test equipment procurement, and engineering evaluations., • Generate technical reports, specifications, and supporting engineering documentation., • Contribute to proposal efforts, technical bids, and customer-driven development projects., • Utilize computer-aided engineering (CAE) and simulation tools to support product design and analysis.Required Qualifications, • Bachelor's degree in Electrical Engineering (BSEE) or related discipline., • Minimum of 3-5 years of experience in RF, microwave, digital, or embedded systems engineering., • Experience designing, developing, analyzing, and testing electronic hardware and systems., • Strong understanding of RF and microwave circuit design principles., • Experience with circuit modeling, simulation, tuning, optimization, and performance validation., • Knowledge of amplifier design using packaged components and/or bare die technologies., • Experience with embedded hardware and software development., • Proficiency in C and/or C++ programming., • Familiarity with Real-Time Operating Systems (RTOS)., • Experience working with Microchip PIC microcontrollers or similar embedded platforms., • FPGA development experience using Verilog and/or VHDL., • Familiarity with Xilinx FPGA devices and associated development tools., • Strong troubleshooting, laboratory testing, and system integration skills., • Excellent verbal, written, and technical documentation skills.Preferred Qualifications, • Experience developing products for aerospace, defense, communications, radar, or similar high-reliability industries., • Experience with mixed-signal electronics and embedded system integration., • Knowledge of RF testing equipment, signal analysis, and system-level debugging., • Experience supporting products from concept through production release., • Ability to work collaboratively in a fast-paced engineering environment.Compensation & Benefits, • Competitive base salary commensurate with experience., • Comprehensive medical, dental, and vision benefits., • 401(k) retirement savings program., • Paid time off and company holidays., • Professional development and training opportunities., • Career advancement potential within a growing engineering organization.Why Consider This Opportunity?, • Work on advanced RF, microwave, digital, and embedded technologies., • Join a highly collaborative engineering team focused on innovation., • Contribute to the development of complex electronic systems supporting mission-critical applications., • Gain exposure to the full product lifecycle from concept through production.Candidates with experience in RF design, embedded systems, FPGA development, and advanced electronic hardware are strongly encouraged to apply. In accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $95k-$125k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $95,000.00 to $125,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionJunior Electrical Engineer Location: Hauppauge, NY (100% Onsite) Schedule: Full-Time | Contract-to-Hire | 9/80 Schedule (Every Other Friday Off) Our client is an award-winning engineering services company that specializes in developing innovative products across aerospace, commercial, medical, industrial, and consumer markets. They are seeking a Junior Electrical Engineer to join their growing team in Hauppauge, NY. This is an excellent opportunity for an engineer with strong troubleshooting experience who enjoys hands-on laboratory work and wants exposure to a wide variety of cutting-edge technologies and client projects. You'll work alongside experienced engineers in a collaborative, family-oriented environment that values innovation, teamwork, and professional growth. Key Responsibilities • Conduct testing, validation, troubleshooting, and debugging of electronic systems and products in a laboratory environment., • Support commercial and aerospace development programs through hands-on electrical testing and analysis., • Utilize oscilloscopes, voltmeters, logic analyzers, and other lab equipment to diagnose and resolve issues., • Create and modify schematics using Cadence or similar schematic capture software., • Assist Senior Electrical Engineers with product development, testing, and technical investigations., • Review electrical schematics, component datasheets, and PCB layouts., • Support prototype development, design verification, and product validation activities., • Document test results, troubleshooting findings, and engineering recommendations., • Communicate project status and technical findings with engineering teams and clients as needed.Required Qualifications, • Bachelor's degree in Electrical Engineering from an accredited university (Master's degree preferred)., • 2–5 years of Electrical Engineering experience., • Strong hands-on experience troubleshooting electronic systems and circuits., • Experience working with laboratory test equipment such as:, • Oscilloscopes, • Voltmeters, • Logic analyzers, • Power analyzers, • Experience with schematic capture software, preferably Cadence., • Understanding of analog, digital, and mixed-signal electronics., • Ability to read and interpret schematics, PCB layouts, and technical documentation., • Strong problem-solving and analytical skills.Preferred Qualifications, • Experience with PCB design and layout tools., • Familiarity with aerospace, military, or high-reliability electronic systems., • Knowledge of COTS and military-grade electronic components., • Experience supporting manufacturing, quality, or test engineering activities., • U.S. Citizenship preferred.Why Join?, • Work on innovative commercial and aerospace technologies., • Exposure to diverse engineering projects and clients., • Collaborative small-team environment with direct access to Senior engineers., • Strong company culture focused on teamwork, mentorship, and growth., • Casual work environment that values personality and culture fit., • Competitive compensation and career advancement opportunities., • Flexible 9/80 schedule with every other Friday off., • Family-oriented culture with company events and team activities throughout the year.Ideal Candidate We're looking for someone who enjoys getting hands-on in the lab, thrives on solving complex technical problems, and wants to grow alongside a team of experienced engineers. The ideal candidate is technically curious, collaborative, and excited about working on a variety of challenging products and technologies. Job Type & Location This is a Contract position based out of Hauppauge, NY. Pay and Benefits The pay range for this position is $45.00 - $55.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Hauppauge,NY. Application Deadline This position is anticipated to close on Aug 12, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Job Title: Fire Alarm Technician Job Description This role focuses on installing and servicing fire alarm and low-voltage systems on commercial job sites across Long Island. You will start each day at the central shop in Brentwood and travel with the team to various locations throughout Suffolk and Nassau counties to complete fire alarm installation, wiring, inspection, and service work. You will be driven by team members in a company van. Responsibilities • Install commercial fire alarm systems and related low-voltage equipment in accordance with project specifications and applicable codes., • Perform wiring, pulling wire, and terminating connections for fire alarm and low-voltage systems., • Install and work with conduit and other necessary materials to support fire alarm and electrical installations., • Assist with inspections and testing of fire alarm systems to verify proper operation and compliance., • Provide service and basic troubleshooting for fire alarm and low-voltage systems as needed on job sites., • Work on commercial job sites across Long Island, coordinating daily activities with the team., • Report to the shop in Brentwood each morning to prepare tools, materials, and equipment before traveling to job sites., • Follow safety procedures and maintain a clean and organized work area on all projects., • Collaborate with team members to complete installations efficiently and meet project timelines., • Communicate clearly with supervisors and colleagues about job progress, issues, and material needs. Essential Skills • 3–5 years of experience working with fire alarm or low-voltage systems., • Hands-on experience with fire alarm installation in commercial environments., • Strong electrical and low-voltage wiring skills, including pulling wire and making proper terminations., • Ability to install and work with conduit for fire alarm and low-voltage systems., • Experience performing fire alarm inspections, testing, and basic service work., • Understanding of fire alarm system components and how they integrate within commercial buildings., • Ability to work on multiple commercial job sites across Long Island., • Reliability in reporting to the shop in Brentwood each day and traveling with the team to job locations. Additional Skills & Qualifications • No formal certifications required for this role., • Interest in growing into a senior fire alarm technician position over time., • Willingness to learn and be trained on additional low-voltage systems., • Ability to work effectively as part of a team on busy commercial job sites., • Strong attention to detail and commitment to quality workmanship. Why Work Here? This is a long-term opportunity with a focus on growth and development. You join a team that values training and is committed to building up junior-level technicians into more advanced roles over time. The environment supports learning, hands-on experience, and steady work across a variety of commercial projects, offering a stable path to expand your skills in fire alarm and low-voltage systems. Work Environment The role is based around commercial fire alarm installation work on job sites across Suffolk and Nassau counties. Each workday begins at the shop in Brentwood, where you meet the team and then travel together to the assigned job sites in a company van. You will work with electrical and low-voltage tools, wiring, fire alarm panels, devices, and conduit in active commercial environments. The position involves regular field work, moving between locations, and working in a variety of building conditions typical of commercial construction and service projects. Job Type & Location This is a Contract to Hire position based out of Brentwood, NY. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Brentwood,NY. Application Deadline This position is anticipated to close on Aug 7, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company Description We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow. We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Retlif Testing Laboratories is looking to hire a full-time Environmental Simulation Test Engineer III to join our Ronkonkoma, New York Environmental Simulation Testing Laboratory. Do you have a background in mechanical engineering and want a career, not just a job? This position earns competitive pay, $90,000-$120,000 based on experience. We also offer excellent benefits, including medical, dental, vision, a matching 401(k) plan, paid holidays, paid time off (PTO), and a tuition reimbursement program. If this sounds like the right opportunity for you in electrical engineering, consider applying today! ABOUT RETLIF TESTING LABORATORIES An industry leader for 45 years, we are an independent testing laboratory that provides compliance testing and engineering services to customers in such industries as aerospace, rail, maritime, military, defense, and medical. Retlif provides electromagnetic compatibility, radio approval, product safety, and environmental simulation testing to national and international standards. We pride ourselves on providing exceptional customer service. We have a loyal and long-standing customer base that appreciates our commitment to the highest quality in testing and engineering services. Our mission is to fully address the testing and compliance needs of our clients. As a team member at one of the USA's leading independent testing laboratories, you can expect excellent personal growth opportunities, a professional atmosphere, and comprehensive employee benefits. We are an equal opportunity employer that values each member of our team. A DAY IN THE LIFE OF A TEST ENGINEER As an Environmental Simulation Test Engineer III, you play a critical leadership role as a member of our team. You oversee and mentor other technical staff members who are the technical interface with our customers, serving as a technical resource during the performance of contracted testing as well as during our initial sales efforts. You work closely with the customer to develop program specific test procedures. You are involved with the pre-test engineering reviews, test sample preparation, setup, execution of the tests, and the documentation of test results. You regularly interact directly with customers. In order to apply appropriate test standards and provide time and cost/quotations, you provide support to the sales team. You also get to support Engineering in the development of new service offerings. You get great satisfaction from helping our clients succeed by fully addressing their compliance needs! QUALIFICATIONS FOR AN ENVIRONMENTAL SIMULATION TEST ENGINEER III • Bachelor's degree in a relevant field OR equivalent training, • Required: Minimum of 4 years of industry work experience in the mechanical engineering field of Environmental Simulation Testing., • Prior experience with technical preparation of assigned test procedures for both internal and external use., • Prior experience in job costing and generation of quotations., • Familiarity with the following test standards preferred: MIL-STD – 810, RTCA/DO 160, • Desired hands-on working experience in vibration and shock testing as well as knowledge of temperature, humidity, sand, and dust testing., • Excellent computer skills, • Ability to perform multiple tasks and meet strict deadlines in a fast-paced environment., • Ability to work independently., • Ability to lift 50 pounds, bend, lift, and twist., • Position requires obtaining a hearing test., • Ability to use Air Purified Respirators (APS) or Powered Air Purified Respirators (PAR) is a prerequisite for any testing that requires respiratory protection., • Background that would permit the U.S. Dept. of Defense (DoD) to issue a Secret Clearance, which requires U.S. Citizenship Are you organized and attentive to detail? Do you have excellent interpersonal skills? Can you effectively prioritize multiple tasks in order to meet strict deadlines? Do you have strong communication skills, both written and verbal? Can you work well independently? Do you thrive in a fast-paced environment? If so, you might just be perfect for this Test Engineer position! WORK SCHEDULE This full-time Test Engineer job is Monday - Friday, 8:00 AM - 4:30 PM. Additional hours may be necessary at times, depending on customer needs. READY TO JOIN OUR TEAM? We understand your time is valuable, and that is why we have a very quick and easy application process. If you feel that you are right for this Environmental Simulation Test Engineer III job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Job Posted by ApplicantPro

Job DescriptionDescription: We are seeking a motivated Project Engineer to support the design, development, testing, and production of innovative electrical and LED lighting products. This position works closely with engineering, manufacturing partners, quality, customer service, and overseas suppliers to bring products from concept through production while ensuring quality, regulatory compliance, and customer satisfaction. This is an excellent opportunity for an engineer with a sense of curiosity who enjoys solving technical problems, working hands on in a lab environment, and leading projects in a collaborative team. Key Responsibilities • Design, test, troubleshoot, and improve electrical products through full production lifecycle, • Lead engineering projects with internal teams, OEM customers, and overseas suppliers, • Drive new product development, manufacturing support, and continuous product improvement initiatives, • Create and maintain engineering documentation, specifications, product instruction sheets, and technical work instructions, • Coordinate engineering change documentation and ensure compliance with ISO-controlled documentation requirements, • Provide technical support to Customer Service and manufacturing partners, • Analyze returned products, identify root causes, and recommend corrective actions, • Identify project risks, develop mitigation plans, and manage project schedules, • Provide technical guidance and training to technicians and engineering personnel, • Coordinate hardware, firmware, and software integration efforts, • Execute additional engineering projects, initiatives, and responsibilities as assigned to meet company and department objectivesRequirements:, • Bachelor's degree in Electrical, Computer, Mechanical Engineering, or a related engineering discipline, • 3-5 years of engineering experience, • Experience with electrical product development, electrical systems, troubleshooting, analog and/or digital circuit design, product testing, and continuous improvement activities, • Knowledge of ISO quality systems and engineering documentation, • Experience communicating with overseas suppliers, preferably in China and Taiwan, • Strong analytical, critical thinking, and problem-solving skills, • Customer-focused with excellent written and verbal communication skills Preferred Qualifications • Experience in automotive or residential lighting products is preferred, • Working knowledge of programming languages such as C and/or Python, • Experience with Altium, MPLAB, LabVIEW, FileMaker Pro, or similar engineering tools is a plus Why Join Us • 401(k) with company match, • Highly subsidized medical, dental, and vision coverage, • Paid time off plus paid volunteer day, • Company-paid life insurance, • Employee Assistance Program (EAP) and healthcare concierge services, • Employee discounts on Maxxima products, • Discounts on concerts, movies, and theater events, • Company-sponsored employee events Salary Range: $85,000 - $95,000 Maxxima is a leading manufacturer and supplier of LED lighting technologies with divisions focused in the home lighting and heavy-duty truck markets. We have been in business for over 40 years and we are consistently growing as both the residential and transportation industries continue to depend on us for our innovative, high-quality products. As our company grows, our team is growing right along with it. Apply to join our team. Thank you for your interest in wanting to work with us! Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination.

Job Description Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. Narda-MITEQ designs and manufactures an extensive range of standard active and passive components, as well as custom subsystems and integrated microwave assemblies to meet the requirements found on land, sea, air and the harsh environment of space. Our global customers rely on our deep technical expertise and innovation grounded in 70 years of experience to help them meet the challenges of their next-generation military and commercial applications. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel in this position. Management retains the discretion to add or change the duties at any time. Job Description: Under general supervision, performs a variety of routine, repetitive tasks in the Process Department (thin & thick film labs) to manufacture substrates and elements. The selected candidate must have the ability to perform the essential duties & responsibilities with or without reasonable accommodation. The duties and responsibilities may change from time to time without notice and include but is not limited to the duties described below. Essential Functions: • Operate and maintain thin & dry film equipment, • Prepare substrates for thin & dry film deposition by cleaning, etching, and other surface preparation methods., • Thermal trim; dicing; element deposition/processing; substrate etching., • Etched copper monitoring tolerances., • Resistor rod adjusting/trimming/testing and preparation for downstream processing., • Ensure the laboratory is clean, organized, and well-maintained, following safety protocols and guidelines., • Maintain inventory of laboratory supplies and materials, ordering replacements as necessary, • Assists in meeting daily production requirement throughout process area. Communicate effectively with team lead to discuss production plans, results, and any issues encountered, • Inspection/packing of thin and dry film components, • Electrical compliance testing of manufactured substrate components Qualifications: • High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience., • Mechanically inclined including ability to use microscope and measuring tools such as calipers, multimeter., • Familiar with laboratory control procedures, chemical safety and personal protective equipment (PPE)., • Ability to understand engineering drawings, geometric dimensions, and tolerances., • Preferred knowledge of micro or macro photo fabrication of elements., • Detail-oriented with strong organizational skills., • Ability to work independently and as part of a team., • Excellent communication and interpersonal skills., • Strong problem-solving abilities and a proactive approach to work. Please be aware that many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to maintaining a workplace that is inclusive, respectful, and free from discrimination, where all employees and applicants are treated with dignity and fairness. Employment decisions are made in accordance with applicable federal, state, and local laws. All qualified applicants receive equal consideration without regard to race, color, religion, sex (including pregnancy, childbirth, breastfeeding, or related medical conditions), sexual orientation, gender identity or expression, age, national origin, marital status, citizenship status, disability, protected veteran status, or any other characteristic protected by law. Narda-MITEQ complies with applicable Executive Orders, including affirmative action requirements for individuals with disabilities and veterans. Narda-MITEQ is a drug-free workplace and conducts pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at denise.nocerino@nardamiteq.com. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Job DescriptionMaster Automotive Technician / Mechanic $5,000 signing bonus for qualified Technicians! Land Rover Huntington is looking for Master Automotive Technicians to join our Service team in Huntington, NY! Master Automotive Technician / Mechanic Qualifications: • Minimum 3 years working as a Master Automotive Technician, • Land Rover experience preferred, • Must have valid Driver's License, • CDK & Previous Automotive Dealership experience strongly preferred, • Must have good attendance and time management, • Must have a great work ethic & be willing to join a winning team!Master Automotive Technician / Mechanic Responsibilities:, • Visually inspect and document condition of vehicle based on customers’ requests or concerns, • Conduct initial diagnostic testing to identify specific issues impacting vehicles, • Perform more complex maintenance services on vehicles including (but not limited to) engine replacement, electrical work, transmission repair and more, • Document all services and repairs performed to provide to service advisors and/or customers, • Identify any additional recommendations for services and communicate with management, • Communicate with other service staff and/or customers if additional services are required and ensure information is documented and outlined, • Assist other service technicians or staff with questions to ensure accuracy and efficiency, • Answer high-level questions posed by customers and service staff, • Maintain a clean and safe service departmentMaster Automotive Technician / Mechanic Benefits:, • Full-time position with flexible shifts, • Union pay rates, • Medical & Dental benefits, • Great team environment, tremendous opportunity for growth!, • Highest paying Shop in the Tri-State Area, • Excellent Air-conditioned and heated shop, • Career development and glide path for Technicians, • Paid Training, • Union Shop, • Great Benefits, • Paid Vacation, • Paid Birthday, • Paid Sick days, • 401K and Retirement plan, • Great work environment, • 4 Day work weekLand Rover Huntington is a proud member of the Kollective Automotive Group. KOLLECTIVE - Keys to successEvery Kollective dealership team member is expected to work in concert with other departments to provide an unparalleled ownership experience for each customer they meet, speak to or work with ... to go beyond what is required ... to exceed the customer’s expectations in every thought, word and gesture. That is not only a Kollective tradition, but the very foundation of our success.ABOUTKOLLECTIVE is a new breed of automotive brand. We proudly sell and service some of the world's luxurious and iconic brands, Mercedes-Benz, Lexus, Audi and Jaguar Land Rover. We have operations in New York City, Long Island, New Jersey and Texas.MISSION STATEMENTOur goal is to deliver an express indelible luxury customer shopping experience that is the bedrock of all we do.Our dealership environments reflect the changing global marketplace and reflect the way our customers shop for vehicles. We work tirelessly to grow our businesses partnering within our communities where we will sell and service new, pre-owned, and CPO vehicles. We aren’t purely a car dealership, we are digital and physical retail destination, a way of life, a conduit to a better lifestyle.We care deeply about our customers, employees and the community. Working in the automotive business is not just a job for us, it’s a calling. We’ve committed to this industry because we’re all striving to be a part of something that makes a real, meaningful difference.In short, we always ‘do the right thing.’ And together we are “Driving Modern Luxury.”EQUAL OPPORTUNITYWe are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionSalary: $25-$30 Hourly Job description: Global Fueling Systems Inc. is looking forFueling Facility Wiring/Electrical Service Technicianin Long Island, New York. • Full-time, • 40 hours per week Global Fueling Systems provides sales, design, repair, and maintenance of oil and gas fluid management systems, and motor vehicle fueling systems. We are a group of fun and motivated industry professionals. We are looking for you to join our team! Please send your resume or call at 631-815-1361 to schedule an interview. Global Fueling Systems Inc. is an equal-opportunity employer. We encourage applications from all qualified individuals without regard to race, color, religion, gender, sexual orientation, age, national origin, marital status, citizenship, disability, or veteran status. What Drives Us And You Our core values arent just words they shape how we work, grow, and succeedtogether. If youre the kind of person who takes pride in doing things right and enjoys being part of a team that supports each other, this is your kind of place. • Take CARE of Each Other If youre not a team player, this isnt your place. Were a team, and weve built a culture of support, respect, and collaboration., • ECSTATIC Customers Were proud to exceed expectations with service and precision., • Radical CANDOR We value honest, clear, and respectful communication even when it's tough. If you avoid feedback or cant give it constructively, youll struggle here., • Be QUICK, But Dont HURRY We execute with accuracy and urgency, never sacrificing quality for speed., • Innovation Is at Our Core From tools to techniques, we never stop improving. If you resist change or dont want to learn, this wont be a good fit. We perform work at various types of fueling facilities: • Retail sites (service stations and convenience stores), • Private customers (trucking companies, marinas), • Municipal customers (schools, government facilities, fire departments) Fuel system components include, but are not limited to: • Fuel dispensers, • Pumps, • Controllers, • Point of Sale (POS) systems, • Printers, • Fuel Management Systems, • Sensors, • Alarm systems, • Programming, • Probes, • Tanks and Tank Hardware, • Filters, • Tank level monitors, • Leak detection equipment, • Valves, • Piping and Fluid conveying systems, • Meters & Registers, • Various electrical and mechanical equipment Do you have experience in any of the following? • Plumbing, • Electrical, • Electronic systems, • HVAC, • Mechanics Are you interested in: • Gaining experience in a new industry? We train on the job!, • Working for a stable, growing company? We have been in business for 53 years., • Learning new skills? All of our technicians are industry certified. Do you have these SKILLS/QUALIFICATIONS: • High school diploma or equivalency, • Electrical work experience in a petroleum equipment or other related industry preferred, • Low voltage experience preferred, • Good computer/tablet skills; knowledge of networking and computer hardware and software, • Programming, communication & data transfer experience preferred, • Good mechanical aptitude; able to safely operate hand tools, • A valid and clean drivers license, • Problem-solving abilities, • Excellent communications and customer service skills, • A positive attitude, project a professional tone, and provide clear concise information, • Ability to lead without constant supervision, dependable, dedicated, can-do attitude and willing to work and learn, • Must read, write, speak and understand English with exceptional analytical, communication, and interaction skills, • Willing to work overtime and on-call emergency, • Must be able to wear appropriate PPE in the facility and be able to physically perform all tasks in the field., • Excellent teamwork skills JOB RESPONSIBILITIES • Troubleshoot, inspect, repair, maintain, and install all electrical systems, alarm systems, fuel equipment wiring, fuel dispensing systems, fuel management systems and various other types of electronic equipment in fueling facility., • Make recommendations for upgrades, repairs, maintenance, etc., • Calibrate and modify systems according to site needs, • Perform repairs and preventative maintenance on electronics, computers, and fuel dispensing systems, • Remove, replace and repair electrical wiring, alarms, and sensors of the fuel and tank monitoring systems, • Perform on-site compliance inspections and testing of aboveground and underground tank, • Perform service calls as needed on an after-hours basis, • Respond to emergency calls to complete service requests in a timely manner and ensure all requests are handled in a professional manner, • Resolve warranty calls, • Select materials and parts required to complete assigned repairs., • Operate and maintain tools and equipment safely to accomplish the assigned task and Maintain an adequate supply of parts for emergency repairs, • Comprehend customer requirements and assist in diagnosis, analysis and make appropriate recommendations, with an excellent work ethic, • Completes assigned tasks quickly, completely, and consistent with guideline, • Work safely in accordance with OSHA Standards, • Perform required prerequisite work necessary to obtain and maintain certification from original equipment manufacturers, • Any other duties or responsibilities, as assigned SUPPLEMENTAL PAY • Prevailing Wage, • Emergency After-Hours On-Call Pay BENEFITS • Medical, dental, and vision insurance, • Life insurance, • 401(k), • Paid holidays, • Paid vacation, sick time/personal time off, • Employee Discount Program, • Employee Assistance Program (EAP), • Flexible Spending Account (FSA), • Health Savings Account (HSA), • Training Please submit your resume or call 631-815-1361 to schedule an interview. You can find us at: https://services.globalfuelingsystems.com/ Global Fueling Systems is an Equal Opportunity Employer and complies with all state and federal laws. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, or protected veteran or disabled status and will not be discriminated against.

Job Description We are currently hiring for the position of Generator Technician. As a Generator Technician, you will be responsible for installing, maintaining, and repairing generators and their related systems. Working with a variety of generator models and sizes, you will ensure their optimal performance and reliability. Your key responsibilities as a Generator Technician will include: • Installing and commissioning generators according to manufacturer guidelines and specifications, • Performing routine maintenance and inspections on generators, including oil and filter changes, fuel system inspections, and component testing, • Diagnosing and troubleshooting electrical and mechanical issues, identifying faulty components and implementing necessary repairs, • Replacing faulty parts and components, ensuring proper installation and adjustment, • Maintaining accurate records of all maintenance and repair activities, including completed work order forms and parts used, • Complying with safety regulations and protocols, ensuring a safe work environment at all times, • Work with diesel and natural gas engines, • Work with Automatic Transfer Switches Requirements • 2+ years of experience with with commercial Backup Power Generators, • Experienced with engine and generator troubleshooting, • Strong electrical and mechanical aptitude, • Ability to diagnose and troubleshoot generator issues, • Knowledge of generator safety protocols, • Excellent problem-solving and communication skills Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Company Truck, • Uniforms, • Tool Loan Policy

$66 - $130/hourpaysemiconductorsengineeringmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Role Title: Semiconductor Devices & Microelectronics Expert Role Type: Contractor Location: Remote micro1 is engaging Semiconductor Devices & Microelectronics Experts to contribute to a dynamic customer project focused on advancing semiconductor technologies and microelectronics solutions. In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Scope of Work • Analyze and provide insights on semiconductor device physics, operational principles, and recent advances., • Evaluate and discuss microfabrication techniques, including process integration and yield optimization., • Contribute technical assessments on device scaling, performance modeling, and reliability methodologies., • Review and critique materials used in electronic and semiconducting device fabrication., • Create detailed written explanations and verbal clarifications of complex engineering concepts for AI model training purposes., • Deliver structured feedback on project data to ensure technical accuracy and completeness., • Collaborate asynchronously with project coordinators and other domain experts within the platform. Preferred Qualifications • Advanced degree (Master’s or PhD) in Electrical Engineering, Materials Science, Physics, or a related discipline., • Extensive experience in semiconductor device design, fabrication processes, and microelectronics engineering., • Proven understanding of semiconductor physics, device modeling, and reliability testing., • Hands-on exposure to modern microfabrication and process integration techniques., • Strong analytical and critical thinking skills with the ability to break down complex topics., • Exceptional written and verbal communication skills, with a focus on articulating technical concepts clearly., • Prior experience contributing to technical publications, patents, or collaborative R&D projects is a plus. Compensation Structure Compensation is output-based; experts are paid per task that meets the project specifications. The time required to complete work may vary depending on the expert’s experience and workflow. Minimum submission requirements apply. Experts must submit a minimum of tasks per week. Start Timeline & Availability We typically fill roles within 48 hours and are looking for experts ready to jump in right away. If selected, we expect you to start your first tasks within 24–48 hours of completing onboarding.

Job Description Core Responsibilities: -Inspect, repair, and maintain electrical systems, including wiring, panels, switches, outlets, lighting fixtures, generators, UPS, PDUs, primary switchgear, and emergency backup systems. -Diagnose and resolve issues such as power outages, faults, short circuits, and malfunctioning equipment; perform necessary troubleshooting, testing, and repairs. -Install or modify electrical systems and components during renovations and upgrades. -Conduct preventive maintenance, testing (e.g., grounding, insulation), and record-keeping per schedules, manufacturer guidelines, and NEC standards. -Ensure compliance with electrical/building codes, NFPA, OSHA, and safety standards; inspect emergency lighting, fire alarm interfaces, and life safety systems. -Log work orders, track metrics, and report on activities using department software. -Collaborate with team members and contractors; provide technical support and supervise electrical contractor work as needed. -Perform minor related trade tasks (e.g., demolition, patching, painting, cleanup) to complete electrical assignments. -Attend at least 2-3 professional training sessions annually, including IUOE Local 30 courses. -All other duties as assigned. • Proficient in electrical safety procedures (NFPA 70E and OSHA), • Must have at least 4 years of commercial/industrial experience in the electrical trade., • Ensure all work complies with NEC standards and local building codes., • Shows the ability to work with and around High Voltage up to 13.2 KVA, • Install, maintain, adjust, operate, test and repair branch circuits, power distribution wiring, electrical equipment, fixtures, lighting systems, and conduit in compliance with the National Electric Code (NEC)., • Lead and supervise electrical installations on construction sites, including commercial and industrial projects, • Experience with 208V three-phase , 208V single-phase , 120/240V , 208/240V, 480 Volt 3 phase circuitry ., • Availability – available for emergency calls 24hrs 7 days per week ., • Proficiency in NEC code, designing, installing, and maintaining electrical systems., • Strong problem-solving/troubleshooting, deep mechanical and electrical knowledge, excellent customer service/communication, attention to detail, and time management, • Read and interpret blueprints, schematics, and technical drawings to determine the layout of Electrical systems.

Job Description Job Overview Are you ready for a career in robotics and utility field services? Our Natural Gas Field Mechanical Technician operate and maintain a robotic system called CISBOT which performs critical repairs from within buried natural gas pipelines. This is a unique opportunity to work in a dynamic outdoor utility construction site with interesting people and innovative robotic technology—while helping repair and prevent methane leaks to support a cleaner environment. ULC provides training on our proprietary robotic system, as well as all components of the repair operation. Many of our field technicians came from diverse backgrounds such as automotive repair, plumbing, construction, HVAC and other industries. The ideal candidate has the ability to work as part of a team outside in a street/roadwork construction environment and is okay getting dirty. We will provide training on gas safety, field tasks, and our robotic technology to ensure you succeed in this position. If you have a background or interest in mechanical, pneumatic, or electrical troubleshooting then this makes you a perfect candidate for this job. This is a unique opportunity to work with very smart and creative people utilizing state-of-the-art robotics for interesting projects in a dynamic environment. What does a day in the life of a Natural Gas Field Mechanical Technician look like at ULC Technologies? Our Field Technicians operate and maintain a robotic system called CISBOT which performs critical repairs from within buried natural gas pipelines. This unique opportunity allows you to work within a dynamic environment among some of the brightest minds in the field with an opportunity to grow in the role. ULC provides training on our proprietary robotic system, as well as all components of the repair operation. We will also provide training on gas piping and systems as well as inspection and repair technology. If you have a strong interest in and comprehension of mechanical, pneumatic, and electrical systems, then this makes you a perfect candidate for this job. Job Responsibilities • Attend in-person and in-field training to learn about our equipment and get qualified for a range of field tasks, • Participate in daily site briefings and come to work prepared with full PPE, • Learn and follow all protocols for site safety, set up, operation and breakdown; Become an expert in the use of our equipment and our procedures., • Help set up job sites and ensure safety by placing cones, barriers and wheel chocks; set up and calibrating gas detection equipment., • Aid in the set up and breakdown of our proprietary technology and equipment within the utility excavation and around the work site, • Monitor and manage the work site throughout the day, • Maintain overall cleanliness and provide routine maintenance on our vehicles, • Monitor inventory of spare parts and perform daily system testing., • Continuously learn and train; Show a desire to learn and perform additional tasks, • Other duties as assigned To be successful in this role, you must have the following: • High School Diploma or equivalent, • Valid driver’s license with a clean driving record, • Ability to pass a mandatory drug/alcohol test and background check, including random drug screens per DOT/PHMSA regulations Other considerations: • Ability and willingness to travel, • Occasional weekend/night work, • Hands-on mechanical, pneumatics, electronics, and troubleshooting experience a plus; training will be provided, • Capacity to drive small utility trucks, • Keen interest in technology and robotics, • Ability to remain calm under pressure and put safety first all the time Physical Requirements: • Capable of lifting and carrying equipment weighing up to 50 lbs., • Ability to work outdoors and in varied weather conditions, • Ability to climb ladders and stairs, • Use of various hand tools Training Provided and Funded by ULC Technologies: • Occupational Safety and Health Administration (OSHA10) certified, • First Aid/CPR/AED certified, • Northeast Gas Association (NGA) training, • Pipeline Robotics System/Operation Training, • Gas Utility/Pipeline Training, • Hands-on mechanical, pneumatics, electronics, and troubleshooting of our robotic system, • Continuous training as company progresses Pay/Benefits: • Starting pay $31.80/hr; ability to advance., • Overtime Available, • Travel Incentives, • Per diem and paid hotel when travelling overnight, • Annual Merit Increase opportunity, • Annual Bonus Opportunity, • Medical/Vision/Dental Insurance, • 401K with company match, • Tuition Assistance Program, • Paid Time Off – Vacation and Sick Time, • Paid Holidays, • HSA/FSA Program, • PPE/Uniforms providedCompany DescriptionULC Technologies is a dynamic company growing at a fast pace. We are a leader in product development and engineering services for the natural gas, energy, industrial, and electric markets. We are committed to solving operations and maintenance problems while protecting the environment, reducing costs, increasing efficiency, and improving safety. We’re a global company of thinkers, problem solvers, designers and makers. We each play a unique role. Built on a legacy of innovation, ULC Technologies is committed to leading the utility robotics revolution and has been since our start in 2001. We foster an environment which encourages the exchange of ideas and inspires change by challenging traditional thought and approaches to problem-solving. Though we are constantly evolving to meet the complex demands of our industry, we remain dedicated to creating an impact, locally and globally, through meaningful work. We are proud of how our technology helps utilities minimize their impact on the environment and the public while lowering operating costs. We develop new technologies today, so we can change tomorrow. If you have a passion to protect our environment, improve safety, and increase operational efficiencies and seek new challenges, this is the job for you.ULC Technologies is a dynamic company growing at a fast pace. We are a leader in product development and engineering services for the natural gas, energy, industrial, and electric markets. We are committed to solving operations and maintenance problems while protecting the environment, reducing costs, increasing efficiency, and improving safety.\n\nWe’re a global company of thinkers, problem solvers, designers and makers. We each play a unique role. Built on a legacy of innovation, ULC Technologies is committed to leading the utility robotics revolution and has been since our start in 2001. We foster an environment which encourages the exchange of ideas and inspires change by challenging traditional thought and approaches to problem-solving.\n\nThough we are constantly evolving to meet the complex demands of our industry, we remain dedicated to creating an impact, locally and globally, through meaningful work. We are proud of how our technology helps utilities minimize their impact on the environment and the public while lowering operating costs.\n\nWe develop new technologies today, so we can change tomorrow.\n\nIf you have a passion to protect our environment, improve safety, and increase operational efficiencies and seek new challenges, this is the job for you.

Job Description Job description Nissan of Smithtown is one of the region's top rated customer satisfaction dealerships, as well as being the largest Nissan store on Long Island. Our team provides training courses and offers opportunities for advancement, which focuses to help you grow both personally and professionally. We are growing at the fastest rate of any Nissan dealer in the area and looking for the right people to grow with. What We're Looking For We are looking for A, B, C and Express Technicians to continue our growth and provide our customers with exceptional service. Build your career and develop your professional experience with our team. The ideal candidate will flourish in a fast-paced and professional workplace. Don't believe just my ad, come and talk to the techs in the shop! What We Offer • Highly productive shop ( techs collectively averaging over 60hrs each with some in the 80-90 range regularly), • Continued education and manufacturer training, • Clean and professional work environment, • Health insurance, • If you have accrued vacation time with your current store we will honor it from day one. No losing time with your family to come work with us. Responsibilities • Perform work specified on the repair order with efficiency and in accordance with dealership - familiarizing yourself with the service department & procedures, • Assist Service Advisor in test-driving vehicles, and testing components and systems. You will learn how to use diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc, • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs, • Executing repairs under warranty to manufacturer specifications Qualifications • Minimum of 1 year in service department, • Technical degree preferred, • ASE certifications preferred, • High School Diploma or GED, • Ability to identify the problem quickly, • Effective analytical and communication skills, • Good reading, computer, and mathematics skills, • Ability to learn new technology and repair and service procedures and specifications, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Basic Computer Skills, • Positive, friendly attitude Come and join the top Nissan team on Long Island. Do not waste your time with other dealers who treat you poorly. Don't put off the change any longer.

Job Description Job description Nissan of Huntington is one of the region's top rated customer satisfaction dealerships, as well as being one of the largest Nissan stores on Long Island. Our team provides training courses and offers opportunities for advancement, which focuses to help you grow both personally and professionally. We are growing at the fastest rate of any Nissan dealer in the area and looking for the right people to grow with. What We're Looking For We are looking for A, B, C and Express Technicians to continue our growth and provide our customers with exceptional service. Build your career and develop your professional experience with our team. The ideal candidate will flourish in a fast-paced and professional workplace. Don't believe just my ad, come and talk to the techs in the shop! What We Offer • Highly productive shop ( techs collectively averaging over 60hrs each with some in the 80-90 range regularly), • Continued education and manufacturer training, • Clean and professional work environment, • Health insurance, • If you have accrued vacation time with your current store we will honor it from day one. No losing time with your family to come work with us. Responsibilities • Perform work specified on the repair order with efficiency and in accordance with dealership - familiarizing yourself with the service department & procedures, • Assist Service Advisor in test-driving vehicles, and testing components and systems. You will learn how to use diagnostic tools and special service equipment, • Diagnosing, maintaining, and repairing vehicle automotive systems including engine, transmission, electrical steering, suspension, brakes, air conditioning, etc, • Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Providing an estimate of time needed for additional repairs, • Executing repairs under warranty to manufacturer specifications Qualifications • Minimum of 1 year in service department, • Technical degree preferred, • ASE certifications preferred, • High School Diploma or GED, • Ability to identify the problem quickly, • Effective analytical and communication skills, • Good reading, computer, and mathematics skills, • Ability to learn new technology and repair and service procedures and specifications, • Ability to lift 50 pounds, • Ability to work on your feet for extended periods of time, • Ability to work in a fast-paced environment, • Basic Computer Skills, • Positive, friendly attitude Come and join the top Nissan team on Long Island. Do not waste your time with other dealers who treat you poorly. Don't put off the change any longer.

Conduct preventive maintenance, testing (e. Commercial Electrical Maintenance.

About UsSpellman High Voltage Electronics Corporation, a family owned business for over 75 years, takes pride in powering progress in health, security and quality of life. We are key partners with the world’s leading medical devices, semiconductor, scientific analytics and industrial systems manufacturers. When they want to push the limits of what’s possible with high voltage applications, they turn to us to make it happen.While Spellman is not a household name, our products are used to make and often power many of the most advanced technologies that make modern life possible. With design and manufacturing sites in North America, Europe and Asia, we have become the preferred provider of high voltage power solutions for OEMs pushing the boundaries of technology around the world by designing and producing the products they need to power progress.As part of our continuous focus on offering high-performance and cutting-edge products and solutions to our markets, the fields of advanced power conversion, power management, and controls, and embedded systems are of strategic and critical importance. In this context, Spellman High Voltage Electronics Corp. is seeking a highly talented, motivated, creative, and experienced engineering leader in embedded systems, specifically in Power Electronics, Power Management, and Digital Controls, encompassing development, testing, and validation.For this highly skilled and hands-on engineering leadership role, our expectations are as follows: In addition to managing the day-to-day activities of a growing team of seven highly skilled embedded systems engineers, you will focus on the design, development, implementation, testing, and documentation of complex firmware and software to be used in high voltage power supplies across all our markets and applications. You will interface with and support our global engineering community as needed and provide support to the business development and sales teams on all relevant matters.Further, success in this role requires strong people management and soft skills, including coaching and mentoring. A deep understanding of RTOS and bare-metal firmware is also essential.RESPONSIBILITIES:TechnicalOversight of all Embedded Systems development activities for all Spellman products and platforms and all associated R&D. This includes providing technical direction, workload management, prioritization, and day-to-day technical expertise to teammates.Project planning for firmware/software development needs.Oversight of all firmware and software design for sophisticated high voltage power supplies (HVPS). This includes languages such as C, Verilog, VHDL, Assembly, C#, VB6, Java, and WPF, as well as firmware development based on RTOS.Interface with peers in the Engineering team to implement desired features as described in product and application requirements.Oversight of the preparation of all technical documentation, such as circuit diagrams, manuals, technical reports, and release documentation.Support the review and interpretation of internal/external customer requirements.Oversee and improve the firmware and software release process, including the use of revision control systems such as Tortoise SVN.Continuous research of the latest concepts in Embedded Systems development, including DSPs, MCUs, FPGAs, CPLDs, and SOMs.Leadership and Managerial ResponsibilitiesProvide daily leadership, expertise, and coaching to our highly skilled and dynamic Embedded Systems/Digital engineering team in Hauppauge, NY.Collaborate with the company’s global engineering, sales & marketing, operations, and quality teams to support common projects and overall company strategy.Develop and implement Embedded Systems Engineering strategies for current and future product and technology development projects in alignment with the company’s overall objectives.Foster an engineering culture of high performance, serving as a role model through leadership by example.Lead the Embedded Systems Engineering team with a hands-on approach, focusing on project planning and management, risk assessment and mitigation, staff development, and customer satisfaction.Execute product design and development projects using lean and risk management principles, covering new product and technology development as well as existing product sustainability, including performance, quality, reliability, and cost improvements.Support the Sales & Marketing team and work directly with customers to identify product needs, application details, and product requirements, providing support and technical expertise to pre- and post-sales teams and application engineering professionals.Align priorities and business needs with the Manufacturing and Quality departments, driving a culture of continuous learning and improvement.Plan and formulate engineering programs and organize project teams according to project requirements and priorities.Engage in strategic discussions regarding products, markets, and technology/product road-mapping.Review product designs for compliance with engineering principles, company standards, customer contract requirements, and applicable specifications, including industry standards and homologation requirements.Lead and oversee product design reviews, approving design changes, specifications, and software/firmware releases in accordance with Spellman engineering product development processes.Ensure timely project execution within the allotted budget.Ensure compliance with all Spellman and other governing security regulations.Qualifications & Requirements:Bachelor’s degree in Electrical Engineering (Master’s degree preferred) with 15+ years of hands-on experience in product and technology development within the power conversion and management (power electronics) field. Experience in high voltage X-ray power conversion technology is highly desired.Extensive knowledge of power electronics, power conversion, analog circuit design, and a strong understanding of magnetic design principles for both low and high voltage applications is preferred.7+ years of experience leading an engineering team in a global company, ideally with direct exposure to a manufacturing environment.Proven leadership abilities with a focus on both tactical and strategic business aspects.Ability to identify and enhance the strengths of team members, providing coaching, motivation, and direction as needed.Commitment to fostering high performance and an environment of open collaboration and teamwork.Flexible, customer-focused orientation with an emphasis on successful and seamless project execution, as well as the strategic needs of the company.Passionate about collaborating with multidisciplinary teams (sales and marketing, operations, quality, supply chain), customers, and other company teams to drive a continuous and strong focus on value creation.Excellent project management skills and proficiency with engineering design and analysis tools in the fields of power conversion, power management, and digital and analog control.Willingness to travel both domestically and internationally (approximately 10%).Our good faith estimate of the salary range for this role is $200,000 - $275,000. Exact compensation may vary based on skills, experience, and other factors. In addition to base pay, we offer a full benefits package.This position requires on-site presence at Spellman High Voltage headquarters in Hauppauge, NY. Relocation assistance is available.We at Spellman High Voltage Electronics Corporation believe that each individual is entitled to equal employment opportunities without regard to race, color, creed, gender, sexual orientation, gender identity, marital status, national origin, age, veteran status or disability. The right of equal employment opportunity extends to recruiting, hiring selection, transfer, promotion, training and all other conditions of employment. To request accommodation related to disabilities, please email us at careers@spellmanhv.com, or call +1 (631) 630-3000Note to Recruiters and Placement Agencies: Spellman High Voltage Electronics does not accept unsolicited agency resumes. Please do not forward unsolicited agency resumes to our website or to any Spellman High Voltage Electronics employee. Spellman High Voltage Electronics will not pay fees to any third party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Spellman High Voltage Electronics and will be processed accordingly.SummaryLocation: US - NY - HauppaugeType: Full time

Job Description Service Maintenance Technician Your role as a Service Maintenance Technician matters because it delivers excellent customer experience, and you are working as part of a winning team. At our company, every team member plays a crucial role in shaping the future of our business. Your dedication and passion for excellence will not only drive your personal growth but also contribute to our collective success. Together, we create memorable experiences for our customers, foster innovation, and build a supportive and dynamic work environment. Join us and be a part of a team that values your contributions and celebrates your achievements. https://azureon.com/about/#CoreValues As a Pool Service Maintenance Technician, you will be responsible for maintaining residential pool facilities by performing routine maintenance, repairs, and water chemistry testing to ensure a hassle-free swimming experience for customers. This role also offers opportunities for professional growth, allowing you to expand your expertise in the pool industry and develop leadership skills through ongoing training and education. Key Responsibilities: • Vacuum pool debris, skim surface, brush pool walls and tiles to remove dirt and algae., • Regularly test pool water for pH levels, chlorine concentrations, and other chemicals, maintaining Langelier Saturation Index (LSI) balance., • Perform preventative maintenance on pumps, filters, and heaters., • Perform minor repairs to equipment, such as damage filters, gaskets, O-rings, leaks in pipes or fittings, adjusting loose components. Lubricating moving parts to ensure smooth operation., • Identify parts needed and place accurate, detailed part requests with office., • Assist with emergency repair situations, • Perform pool start-ups and winterizations, ensuring all procedures are followed correctly to prevent freeze damage on all types of pool equipment. Stay informed on the latest best practices for proper winterization., • Understand safe methods of draining and cleaning pools to prevent pool popping or structural damage., • Inform homeowners and the office of non-compliance safety code issues., • Complete work orders and record all activities, including services done, before/after pictures, and chemical readings and dosages., • Keep the truck organized and stocked, • Follow and Promote safety procedures What you’ll need to be successful in this role, training will be provided: • Experience with plumbing & electrical work preferred., • Basic mechanical skills., • Knowledge of pool water circulation, equipment operation & maintenance, pool chemicals and chemical handling., • Comfortably interacting with clients, as needed., • Dependability, and the ability to adapt to changing demands., • Excellent organizational skills, attention to detail, focus, and accuracy., • Ability to work with a team, follow directions, and complete tasks., • Work towards a goal to take on a service technician’s role. Requirements: • High school diploma or GED certificate, • Valid driver’s license and 3 years minimum driving experience, • Ability to stand, walk, and sit for long periods, • Ability to climb, stoop, kneel, reach, push, pull, and grasp, • Capability to lift moderate to heavy objects, typically around 50 lbs., with occasional requirements to lift up to 75 lbs. Benefits: • Retirement savings plan with employer match., • Paid time off and holidays., • Ongoing training and professional development opportunities.

Repairs, installs, replaces, and tests electrical circuits, equipment, and appliances using appropriate tools and testing instruments. Installs and monitors performance of installed electrical equipment for hazards, adjustments, or replacement.

Associate's Degree - 2 year vocational technical certificate or degree preferably in a mechanical or electrical application. Able to read & understand electrical mechanical building type drawings/schematics.

Construct electrical systems in compliance with UL, NEC, CSA, and other codes. Test electrical systems before and during power-up. Associates degree in Electrical or equivalent.

This role is responsible for various electrical installations as required to manufacture products to customer drawings, specifications, or other forms of instruction. Able to understand electrical symbols;. Able to make simple electrical connections;.

Location 140 Cooper Ave, Tonawanda, NY, 14150, United States.Description Requirements Summary.

Performs testing of electrical equipment and systems in accordance with applicable procedures, and guidelines. Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and el

Electrician Job Duties: Install, maintain, and enhance electrical systems and components, including fuses, lights, and wiring Inspect, test, and diagnose issues with electrical systems an

Responsible for the maintenance and repair of electrical equipment. Analyze and troubleshoot electrical malfunctions in equipment and related components, diagnosing and correcting the problems quickly to avoid production delays. Perform electrical preventative and corrective maintenance on all plant

Work tasks include inspecting testing, troubleshooting, repairing, overhauling, modifying, and performing general maintenance of complex alternating/direct current (AC/DC) electrical and electronic equipment such as motors, transformers, generators, switches, sensors, control panels, variable freque

Required Qualifications: High school diploma or equivalent Ability to work flexible schedules/shifts/areas, including weekends, nights and/or holidays 2+ years of experience in the repair of material handling equipment 2+ years of experience conducting predictive and preventative main

Assures product quality by designing electrical testing methods; testing finished products and system capabilities. Electrical Engineer Job Duties: Evaluates electrical systems, products, components,

Acts as a resource for staff to all levels in any area of technical expertise and works with staff to train them on applicable knowledge of electrical / building codes, field work, and the processes associated with designing electrical systems. Education and Experience Bachelors' degree or equivale

What You'll Do: + Perform ongoing preventive maintenance and repairs on mechanical, electrical, and other building systems.

Responsibilities * Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.

This is where your work makes a difference.At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life.It was our founding belief in 1931 and continues to be our guiding principle.We are redefining healthcare delivery to make a greate