Trabajos industrial automation en Passaic, New JerseyCrear alertas

Job Description Reporting to the Maintenance Supervisor or other Manager, the HVAC Mechanic “A” will lead the daily operation of the HVAC/R shop at the College. This position will be responsible for the ongoing temperature control and comfort of the heating and cooling systems at the College to support academic, lab, administrative, and specialized HVAC/R systems. POSITION SUMMARY Responsibilities include, but are not limited to: • Installs, operates, maintains, and repairs complex HVAC/R systems including water and oil pumps, water analysis and chemical treatment systems, air compressors, pneumatic, electrical and mechanical controls, refrigeration, heating, cooling and ventilating equipment, filters, condensers, cooling towers, evaporators, and heat exchangers., • Responds to HVAC system complaints, performs troubleshooting of systems and provides feedback to Supervisors and Managers on progress., • Plans and performs preventative maintenance tasks for College HVAC/R systems to optimize system performance and energy efficiency., • Installs electric power, piping, controls and duct work to replace, maintain or to install new equipment., • Maintains logs, checklists, and prepares written reports to Supervisor, as appropriate., • Enters information into the College’s Computerized Maintenance Management System (CMMS) to document all work, parts used, system conditions, hours worked, and leverages system data., • Ensures compliance with all safety standards, buildings codes, and environmental regulations., • Leverages Building Automation and Building Management Systems (BAS/BMS) to prioritize, document, and improve system performance and facility comfort., • Monitor and oversee College and contractor staff, as needed., • Attends training sessions and meetings to stay current on all trade, College, and regulatory requirements, • Maintains the cleanliness and orderliness of department spaces., • Prepares list of materials required to maintain inventory and complete projects., • Must respond to emergencies and maintenance tasks, as required, which may include working off-hours or holidays., • Reports to the College during closures and assists with snow and ice clearing operations, as needed., • Performs any other duties or task as may be assigned. SPECIAL SKILLS AND QUALIFICATIONS Education: High School diploma or equivalent required. Vocational School education or an appropriate apprenticeship preferred. Completion of a Journeyman level training program in HVAC/R or associate’s degree in HVAC/R Experience: • Minimum of Six years’ experience maintaining and repairing sophisticated commercial and industrial air conditioning systems including electric/pneumatic controls, fume hoods, high capacity centrifugal refrigeration equipment and roof top units., • Must be EPA Certified Universal Technician in accordance with Section 608 to handle CFCs, HCFCs, and HFCs, • Must have NJ Blue Seal Refrigeration, • Additional state or local licenses and certifications is a plus, • Experience working in an inclusive, collaborative, and respectful team setting. Knowledge, Skills and Abilities: • Demonstrates knowledge of facility operations, maintenance, and industry standards., • Knowledge of power and hand tools, chemical handing procedures, and associated safety protocols., • Knowledge of computerized building automation systems and building managements systems., • Proficiency with Microsoft Office Suite and Google business suite experience preferred., • Provides excellent customer service to students, faculty, and staff., • Excellent organizational, prioritization, time management, and communication skills., • Experience with computerized maintenance management systems (CMMS) preferred., • Interprets and understands blueprints, schematics, wiring diagrams, and layouts., • Reviews projects and capital improvement scopes of work to identify opportunities for improvement., • Prolonged periods walking, standing, bending, stretching, pushing, pulling, climbing ladders, or kneeling on uneven surfaces, • Physically able to operate powered equipment and tools, • Must be able to lift up to 50 pounds at a time, • Able to work in unconditioned, noisy, dimly light, confined, and odorous spaces, including the ability to work in variable and sometimes extreme weather conditions such as rain, snow, storms, heat, cold, and other weather indigenous to the area, • Must be able to wear personal protective equipment (PPE) for prolonged periods of time, • Must be able to climb a ladder and work at heights for extended periods of time Salary and Benefits • Annual Salary is $65,000-$80,000, • NJ Educator's Health Plan with Free Dental and Vision. NJ State Pension Plan., • 13 vacation days, 15 sick days, 4 personal days, 2 floating holidays, 3 Partial Sick Days, all designated holidays and 5 non-designated holidays a year. Bergen Community College provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description About the Client: Our client is an established food manufacturing company specializing in baked goods and specialty bread products. The organization operates in a fast-paced production environment, supplying products to retail and foodservice partners while maintaining a strong focus on quality, food safety, and operational efficiency. Role Overview: The HVAC Technician is responsible for the installation, maintenance, troubleshooting, and repair of HVAC and refrigeration systems in a manufacturing facility. This is a hands-on, plant-based role focused on maintaining equipment uptime, supporting production operations, and ensuring systems operate efficiently and safely. The ideal candidate has strong experience working with industrial HVAC systems, refrigeration units, and facility equipment, and is comfortable performing preventive and corrective maintenance in a fast-paced setting. Job Requirements: • 3 years of experience in HVAC, refrigeration, mechanical, or related technical roles., • Experience working with industrial HVAC systems, refrigeration units, and freezers., • Strong ability to troubleshoot, diagnose, and repair mechanical and electrical systems., • Knowledge of preventive and corrective maintenance practices in manufacturing or industrial environments., • Familiarity with building systems, chilled water, hot water, and steam systems., • Basic understanding of automation systems or building management systems (BMS)., • Experience working with hydraulic and pneumatic systems is a plus., • High school diploma or equivalent required; technical certification preferred., • Ability to use Microsoft Office and/or CMMS systems for maintenance tracking., • Strong hands-on mechanical aptitude and problem-solving skills., • Detail-oriented and safety-focused mindset., • Ability to work independently and within a maintenance team., • Reliable, proactive, and responsive to urgent equipment issues., • Standing, walking, bending, and performing physical tasks throughout the shift., • Lifting and handling materials up to 50 lbs, including tools and equipment., • Comfortable working in manufacturing environments with exposure to heat, cold, and noise., • Maintain HVAC Systems: Install, repair, and maintain heating, ventilation, air conditioning, and refrigeration systems across the facility., • Perform Troubleshooting: Diagnose and repair issues in HVAC, refrigeration, and mechanical systems to minimize downtime., • Support Production Operations: Ensure all equipment is functioning properly to support continuous manufacturing operations., • Monitor Systems: Track the performance of building systems and automation controls, and respond to alarms and system issues., • Repair Mechanical Systems: Maintain and repair chilled-water, hot-water, and steam systems that support facility operations., • Execute Work Orders: Complete maintenance tasks in order of priority and in line with production needs., • Maintain Equipment: Perform preventive maintenance on HVAC and related systems to improve reliability., • Ensure Compliance: Follow all safety policies, GMP standards, and food safety regulations., • Support Inventory Needs: Communicate required parts, tools, and materials to supervisors., • Assist Maintenance Team: Collaborate with the maintenance team on equipment and continuous improvement initiatives. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job DescriptionAbout the Client Our client is a pharmaceutical manufacturing company operating in a regulated, cGMP-compliant environment, focused on quality, safety, and operational efficiency. The organization supports high-volume production and packaging operations, maintaining strict standards across all manufacturing processes. Role Overview: The Packaging Mechanic II is responsible for operating, repairing, and maintaining packaging equipment in a pharmaceutical manufacturing environment. This role, working under limited supervision, supports equipment reliability, production efficiency, and continuous improvement across packaging lines. This is a hands-on, mid-level technical role requiring experience with packaging machinery, changeovers, preventive maintenance, and troubleshooting, with the ability to work more independently while ensuring compliance with cGMP, safety, and environmental standards. This role requires flexibility to work across all shifts (1st, 2nd, and 3rd) and to work overtime, extended hours, or weekends as needed to support production demands. . Job Requirements: • High school diploma or GED required., • 3–5 years of experience in the repair and maintenance of packaging equipment or industrial machinery, or equivalent combination of education and experience., • Strong mechanical aptitude with the ability to troubleshoot and repair equipment independently., • Knowledge of lockout/tagout (LOTO) procedures and compliance with EHS regulations., • Ability to read and interpret technical diagrams, gauges, maps, tables, and instrumentation., • Strong problem-solving and analytical skills., • Ability to effectively communicate in one-on-one and small group settings., • Solid math skills, including basic operations, ratios, percentages, and unit conversions., • Ability to work in a fast-paced manufacturing environment., • Working knowledge or exposure to PLC systems (Programmable Logic Controls) and ladder logic., • Technical school certification or related training., • 3–5 years of mechanical and electrical experience in a packaging or manufacturing environment., • Exposure to moving mechanical parts and vibration in a manufacturing environment., • Frequent standing (up to 8 hours), walking, bending, kneeling, crouching, crawling, and climbing., • Ability to lift and move items over 50 lbs., • Ability to perform tasks requiring close vision, distance vision, color vision, peripheral vision, and depth perception., • Repair Packaging Equipment: Perform repairs on packaging machinery as needed to maintain uptime., • Perform Preventive Maintenance: Conduct routine and preventive maintenance to eliminate unscheduled downtime., • Execute Changeovers: Independently perform equipment changeovers to meet production requirements., • Ensure Compliance: Perform all work in accordance with cGMP, safety practices, housekeeping standards, and environmental regulations., • Support Team Collaboration: Participate in team processes and maintain strong relationships with customers, suppliers, and internal teams., • Manage Tools & Parts: Initiate the purchase of required tools, parts, and materials, and maintain accountability for issued items., • Develop Technical Skills: Continuously upgrade skills as equipment and technology evolve., • Demonstrate Workmanship: Maintain a high level of quality craftsmanship and ownership., • Report Equipment Issues: Notify the Supervisor of breakdowns that require 20 minutes or more to repair., • Work with PLC Systems: Develop familiarity and working knowledge of PLC systems and ladder logic., • Promote Safety: Report health and safety hazards and support corrective actions., • New hires or internal transfers will complete a three-month training and orientation period. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job DescriptionAbout the Client Our client is a pharmaceutical manufacturing company operating in a regulated, cGMP-compliant environment, focused on quality, safety, and operational efficiency. The organization supports high-volume production and packaging operations, maintaining strict standards across all manufacturing processes. Role Overview: Under limited supervision, the Packaging Mechanic III is responsible for operating, repairing, and maintaining packaging equipment in a pharmaceutical manufacturing environment. This role supports equipment performance, production efficiency, and compliance with cGMP, safety, and environmental standards. The position requires hands-on involvement in equipment troubleshooting, diagnostics, maintenance, and changeovers, as well as support for equipment improvements and reliability initiatives in a fast-paced environment. This role requires flexibility to work across all shifts (1st, 2nd, and 3rd) and to work overtime, extended hours, or weekends as needed to support production demands. Job Requirements: • High school diploma or GED required., • 7+ years of experience in the repair and maintenance of packaging equipment or industrial machinery, or equivalent combination of education, training, and experience., • Strong mechanical aptitude and ability to work in a fast-paced environment., • Knowledge of lockout/tagout (LOTO) procedures and compliance with EHS regulations., • Ability to interpret basic blueprints, schematics, and exploded parts diagrams., • Ability to read and comprehend complex instructions., • Strong problem-solving and analytical skills., • Ability to effectively communicate in one-on-one and small group settings., • Ability to read and interpret workplace graphics, tables, maps, gauges, and diagrams., • Solid math skills, including basic operations, ratios, percentages, and unit conversions., • Familiarity with PLC systems (Programmable Logic Controls) and ladder logic., • Experience working with packaging equipment and automation systems, including cartoners, inkjet coders, labeling systems, slat fillers, vision systems, and Allen Bradley HMI/VFD platforms.Preferred Qualifications:, • Technical school certification., • 7+ years of mechanical and electrical experience in a packaging/manufacturing environment preferred., • Experience using machine shop equipment.Physical Requirements:, • Exposure to moving mechanical parts and vibration., • Frequent standing, walking, bending, kneeling, crouching, crawling, and climbing throughout the shift., • Ability to lift and/or move items over 50 lbs., • Ability to perform tasks requiring close vision, distance vision, color vision, peripheral vision, depth perception, and focus adjustment.Key Responsibilities:, • Diagnose & Repair Equipment: Diagnose, rebuild, modify, and repair packaging equipment to ensure optimal performance., • Perform Preventive Maintenance: Conduct routine and preventive maintenance to reduce unscheduled downtime., • Execute Changeovers: Perform efficient, timely changeovers to meet production requirements., • Recommend Equipment Improvements: Identify and recommend equipment upgrades and modifications to improve performance and reliability., • Ensure Compliance: Perform all work in accordance with cGMP, safety practices, housekeeping standards, and environmental regulations., • Support Team Collaboration: Participate in team processes and maintain strong relationships with customers, suppliers, and employees., • Manage Tools & Materials: Initiate purchase of required tools, parts, and materials, ensuring accountability., • Continuous Skill Development: Upgrade skills and knowledge as equipment and technology evolve., • Maintain Work Quality: Demonstrate commitment to quality craftsmanship and job ownership., • Report Equipment Issues: Notify the Supervisor of breakdowns that require 20 minutes or more to repair., • Work with PLC Systems: Develop familiarity with PLC systems and ladder logic., • Promote Safety: Report health and safety hazards and perform appropriate corrective actions., • Perform other job-related duties as assignedTraining:, • New hires or internal transfers will complete a three-month training and orientation period., • Proficiency will be evaluated by the area manager or assigned trainer and documented accordingly. GRIT Staffing & HR Solutions is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees and applicants. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. If you require a reasonable accommodation during the application or interview process, please contact us at so we can assist you.

Job Description We are seeking a skilled Maintenance Technician to join our Engineering team and support our fast-paced food manufacturing environment. In this role, you will be responsible for maintaining production and quality by ensuring the efficient operation, repair, and upkeep of machinery and equipment across the facility. You will work closely with Senior Mechanics and the Maintenance Supervisor to troubleshoot issues, perform preventive maintenance, and support continuous improvement of the production process. Job Responsibilities and Duties: · Perform maintenance tasks, safety checks, and mechanical repairs on all production equipment. · Conduct routine preventative maintenance and service on machinery according to established schedules. · Troubleshoot mechanical issues by observing equipment operation, identifying root causes, and performing corrective repairs. · Install, adjust, or relocate machinery and equipment as needed to support production needs. · Interpret and work from sketches, operations manuals, manufacturer instructions, and engineering specifications. · Ensure equipment and infrastructure meet OSHA and local safety standards. · Maintain a clean, safe, and compliant work environment by following all safety procedures and regulations. · Document maintenance activities and communicate equipment status to supervisors and production leadership. · Support continuous improvement by identifying opportunities to enhance equipment performance and reliability. · Maintain technical knowledge by participating in ongoing training and learning opportunities. Requirements · 3+ years of maintenance experience in a manufacturing environment (food manufacturing or CPG strongly preferred). · Strong knowledge of mechanical systems, electrical components, pneumatics, hydraulics, and machine troubleshooting. · Hands-on experience repairing motors, belts, chains, bearings, sensors, valves, and production equipment. · Ability to read mechanical drawings, electrical schematics, and equipment manuals. · Knowledge of food safety practices, and safe machine operation standards. · Ability to work in a fast-paced, high-volume production environment. · Strong problem-solving skills and the ability to respond quickly to equipment issues. · Basic computer skills for entering work orders and maintenance documentation. · Experience in CPG, food production, beverage, nutraceutical, or packaging operations. · Familiarity with PLCs, VFDs, control panels, and automation troubleshooting. · Experience with CMMS systems. · Bilingual (English/Spanish) is preferred. · Ability to stand, walk, bend, and lift up to 50 lbs. · Ability to work in production environments with varying temperatures. · Comfortable working around machinery, conveyors, and industrial equipment.

Who We Are: Eastern Controls is a family-owned manufacturer’s representative located in the suburbs of Philadelphia, PA that provides the best-in-class process control solutions, service and training. We collaborate with customers in the Life Sciences, Power, Water & Wastewater, Chemical, Refinery, Food & Beverage, and other process-centered industries across an expanding map of geographies. We’re expanding rapidly, technically challenging, and pride ourselves on providing an unrivalled customer experience. If you enjoy a fun, fast-paced company that directly impacts life-sustaining industries and the industrial infrastructure of the United States, apply today. Who We’re Seeking: People would describe you as passionate, driven, energetic, AND technically minded. Must have a strong work ethic, coupled with the ability to influence others, drive sales and serve as the trusted advisor to your customers to solve their biggest engineering challenges. We’re seeking a “hunter” who can grow their given territory significantly while maintaining great relationships with customers and the manufacturers we represent. Strong technical communications skills and organization are critical; you can explain how something works, how it will solve a problem and/or work within a manufacturing process. Managing your schedule, book of business, calls and emails from customers is second nature to you. You love being in front of the customer and aren’t afraid to go the extra mile to get your foot in the door, hand-deliver an order, or help in a pinch. Education: Bachelor’s degree in business/engineering/ or technical degree preferred. Industrial automation or process industry experience preferred. We sell, service and support process control products to engineers/technicians in industrial applications; technical sales experience, analytical aptitude and curiosity are essential to the role. Experience: While we are open to a new/recent graduate who could be trained, we prefer someone who has a passion for process applications within industries of power, oil/gas, chemical, water / wastewater treatment, food & beverage production, pharmaceutical, pulp & paper, and other life-sustaining manufacturing facilities. Candidates must possess an enthusiasm for the types of products we sell and service (process measurement instrumentation, controls valves, actuators, positioners, gas & flame detection and electrical heat trace) and show clear evidence of personal success in growing/building a business (or similar endeavor). Requirements Cultural Fit: Family founded and owned since 1969, Eastern Controls is rooted in strong relationships, technical expertise, and a positive mindset. We work hard, have fun, and treat one another with respect and kindness. Our growth goals aim to serve the myriad of life-sustaining applications we touch, the dedicated customers and manufacturers we partner with, and the employees we call family. Area of Coverage: Northern New Jersey Location: Ideal candidate will live in the sales territory Northern/Central New Jersey, or Eastern PA (I-78/I-80 Access) Travel / Office: Candidate would work out of their home office with local travel to existing customers and building relationships with new customers throughout the territory. Occasional overnight travel required for training and meetings. Initially would need to spend significant time at our headquarters in Edgemont, PA (southwest of Philadelphia) for training and immersion on the product lines. Typically visit the ECI office as needed for additional sales meetings / training. Position Start Date: Immediately Job Category: Sales Job Type: Full Time Job Location: Remote within sales territory (HQ, + designated sales territory) Eastern Controls is dedicated to the principles of equal employment opportunity. We prohibit unlawful discrimination against applicants or employees on the basis of age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local law.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customers and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: We are seeking an experienced Enterprise Application Manager to oversee the implementation, maintenance, and optimization of our enterprise software systems, including ERP, CRM, HRIS, EHS, Waste specific software, Fleet Maintenance, Marketing, Finance and other off-the-shelf IT solutions. The ideal candidate will have strong vendor management skills, hands-on technical expertise, and a willingness to explore emerging technologies such as AI, low-code platforms (Power Apps, etc.), and automation tools. This is a hands-on leadership role requiring both strategic oversight and technical execution to ensure our enterprise applications align with business objectives while driving efficiency and innovation. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Lead the implementation, customization, and support of enterprise applications (ERP, CRM, HCM, etc.)., • Ensure system reliability, performance, and security through proactive monitoring and upgrades., • Troubleshoot and resolve complex application issues, working closely with vendors and internal teams., • Manage integrations between enterprise systems and third-party applications., • Serve as the primary liaison between internal teams and software vendors, consultants, and service providers., • Negotiate contracts, manage SLAs, and ensure vendors meet performance expectations., • Collaborate with business units to gather requirements and align technology solutions with operational needs., • Explore and implement AI-driven enhancements, automation, and low-code solutions (e.g., Power Apps, Power Automate) to optimize workflows., • Stay updated on industry trends and evaluate new enterprise software solutions for scalability and efficiency., • Drive digital transformation initiatives by leveraging modern platforms., • Provide technical guidance to IT support teams and end-users., • Develop training materials and documentation for enterprise applications., • Mentor team and foster a culture of continuous improvement., • Ensure timely program delivery, product quality, and costs are within budget., • Coordinate cross-functional projects and dependencies to meet deadlines., • Level resources across workstreams and identify areas for improvement. Requirements and Qualifications::, • Education: Bachelor's Degree (accredited) in Computer Science, Software Engineering, or Information Technology., • 6+ years of relevant work experience in Information Technology or similar area of study., • 7+ years of experience with enterprise application implementation and maintenance., • Experience working within cross functions to drive project results., • Must possess a wide range of knowledge to support various corporate business functions, • Proven Vendor Management and contract negotiation skills, • Experience with custom connectors and APIs., • Ability to handle change, multitask and keep up with a fast pace and consistently growing environment., • Strong problem solving and creative skills and the ability to exercise sound judgment and make decisions based on accurate and timely analyses., • Should have requirement gathering and documentation experience, • Should be able to work closely with the business stakeholders and work towards the solutioning of the requirements, • Effective written and verbal communication, • Familiarity with project management software like Jira, MS Project is essential. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $150,000.00/Yr. Salary Range Maximum: USD $190,000.00/Yr.

Title: Non-Credit Instructor Department: Assoc Provost Continued Learning Of Reports To: Director, Custom Training Position Type: Staff Position Summary: LDI is seeking instructors with expertise in one or more of the following areas: Technology & Digital Skills: -Computer Science -Robotics and Automation -Coding and Computational Thinking -AI Literacy and Emerging Technologies -Cybersecurity Fundamentals Productivity & Business Tools: -Microsoft Excel from beginner through advanced -Data organization, reporting, and dashboards -Digital collaboration and workflow tools Industrial & Technical Operations: -Electro-Mechanical Maintenance Technician -Multi-Craft Maintenance Mechanic -Automation & PLC Technician -Maintenance Lead or Shift Supervisor Professional & Business Skills: -Data-driven decision making -Project management and Agile methods -Communication and workplace effectiveness -Leadership and change management -Financial literacy and business fundamentals Essential Functions: -Design and deliver customized, skills-based instruction aligned to client objectives and LDI's learning framework. -Develop course outlines, plans, and instructional materials for assigned engagements. -Deliver instruction in person and/or virtually, based on client requirements. -Use project-based, applied, and inquiry-driven teaching methods. -Collaborate with LDI staff and client stakeholders to ensure high-quality delivery. -Maintain clear and timely communication regarding scheduling, availability, and instructional needs. Prerequisite Qualifications: -Teaching, training, or facilitation experience with adult learners or working professionals. -Demonstrated expertise in Excel, Office Suite, data analysis, automation systems, PLCs, maintenance operations, AI tools, or business systems. -Demonstrated expertise in learning management systems and virtual conferencing platforms such as Zoom and Google Meet. -Strong communication and facilitation skills in both in-person and virtual environments. -Relevant certifications, degrees, or substantial professional experience in the subject area. -Equivalent combinations of education and professional experience may be considered. -At the university's discretion, the education and experience prerequisites may be exempted where the candidate can demonstrate to the satisfaction of the university, an equivalent combination of education and experience specifically preparing the candidate for success in the position. Salary Information: In compliance with the NJ Pay Transparency Law, the hourly rate for this position is $45.00 (USD). NJIT considers factors such as (but not limited to) scope and responsibilities of the position, candidate's work experience, education/training, key skills, internal peer equity, as well as, market and organizational considerations when extending an offer. This pay range represents base pay only and excludes any additional items such as incentives, bonuses or other items. FLSA: Non-Exempt Part-Time Apply NowShare Save Job

With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description The Digital Revenue & Customer Experience Manager – Americas is a hands-on, managerial role responsible for defining, scaling, and governing Sika’s emerging digital revenue channel across the Americas Region reporting to the Digital Experience Director Americas together we will work on Sika’s digital transformation. This role will help Sika America’s DX team enhance and elevate the existing digital revenue pipeline—already implemented across the region—ensuring its expansion, adoption, and continuous improvement across the region Americas. At the same time, the role is responsible for building the CX governance model for the region, defining the standards, KPIs, and methodologies that will shape how Sika serves and retains customers in a digital-first world. This role defines the blueprint for how Sika grows, competes, and delivers value in a digital landscape offering the best customer experience. * Lead and develop the Digital Sales & Revenue (DSR) and U.S. Customer Experience teams across North America and Latin America, ensuring regional alignment and performance. * Own and scale the digital revenue channel in the Americas, accountable for adoption, results, process consistency, and cross-country coordination. * Design and govern the end-to-end digital revenue workflow, from lead capture and qualification through routing, follow-up, and sales handover. * Optimize and expand the digital revenue pipeline to improve conversion rates, revenue impact, and regional scalability. * Ensure unified, high-quality operation of digital tools (e.g., Salesforce, Pardot/MCAE) with standardized data, rules, and performance measurement. * Set and manage annual Digital Sourced Revenue targets, supported by regional dashboards tracking leads, pipeline, velocity, and revenue contribution. * Establish and standardize the Customer Experience (CX) framework across the Americas, including KPIs such as NPS, CSAT, CES, response time, and resolution metrics. * Integrate CX insights with digital revenue and service processes to enhance customer satisfaction and reduce friction across the full customer journey. * Drive digital transformation and continuous improvement through automation, innovation, pilots, and adoption of new tools and methodologies. * Lead multiple cross-functional, high-impact initiatives, translating regional insights into actionable plans with measurable business outcomes. Qualifications * Bachelor’s degree in Marketing, Business, Strategy, or a related field, with 5+ years of experience in digital revenue, lead management, CX, or commercial operations (preferably B2B/industrial). * Strong hands-on expertise with Salesforce (lead/opportunity workflows, reporting, dashboards) and Pardot/MCAE. * Proven experience leading regional or multi-country teams in complex business environments. * Deep understanding of digital lead lifecycles, qualification frameworks, scoring models, and routing logic. * Solid knowledge of CX methodologies and metrics (NPS, CSAT, CES), including building dashboards and scorecards. * Ability to design, govern, and scale complex operational processes across multiple markets. * Advanced analytical skills in pipeline performance, conversion metrics, revenue attribution, and SLA governance. * Effective cross-functional leader, collaborating closely with Sales, Marketing, Customer Service, and IT. * Strategic, adaptable, and self-driven leader with strong communication skills and the ability to influence without authority. * B2B digital or distribution models, and familiarity with global Group Marketing structures, helpful. * Spanish fluency a plus Additional Information Perks & Benefits • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Durst Image Technology US has been an industry leader in Digital Imaging for over 80 years. Established in 1936, Durst is a fast-growing company based in Rochester, NY that sells and services large format, label, and corrugated ink jet printers in North America. Our customers are commercial service providers and industrial enterprises, with products requiring a printed surface design. At Durst, you frequently hear "This is the best job I've ever had!" from HQ and field employees alike. We are a financially strong, growing company with products and technology that are on the cutting edge of the digital printing market. Our core, 6-month FSE training program is thorough and includes weeks at our Rochester, NY HQ and in the field shadowing other FSEs. You get to form strong relationships with customers and delight them with outstanding service. You'll have the satisfaction of knowing you made a positive, lasting impact every day. And, you can rest assured that Durst has your back. You can ask literally anyone in the company for help with anything and they are more than happy to assist. Leaders are respected because they walk the walk. Durst prides itself on continued personal and professional development and treating employees like family. Are you the go-to for fix-it assistance in your circle of family and friends? Are you a DIY person who likes working with your hands and mind, tackling challenges, and taking things apart and fixing them? If yes, we want to talk to you! Here are some examples of the skills/experience/hobbies we find typical in our FSE employees: • RC Car and Planes, • Robotics experience, • Automotive repair, • Motorcycle rebuild and repair, • Bicycle repair/modifications, • Small engine repair, • Automation machine repair, • Mechatronics students, • Machine assemblers or repair The purpose of the Field Service Engineer is to ensure timely and cost-effective installation, repair, removal/relocation, and technical support of Durst products while maintaining a high level of customer satisfaction to all Durst customers. Your specific responsibilities include: • Provide timely and effective installation of Durst products and services., • Perform effective initial customer operator/maintenance training, as required., • Maximize Durst equipment uptime through timely response and effective/efficient repair and maintenance to ensure high levels of customer satisfaction., • Efficiently manage utilization of Durst assets (parts, tools, test equipment, autos) and resources (travel expenses, phone, etc.) to achieve targeted financial results., • Communicate and interact with customers, sales and other service counterparts in a positive, courteous and professional manner and always present a professional image to Durst customers. To be considered for this position, you must have these qualifications: • Previous experience in printing or related industry, • Great attitude and eagerness to learn, • Strong mechanical aptitude and good dexterity, • Excellent communication and customer service skills, • Proficient computer skills, • High school diploma or equivalent, • Experience or training within some form of mechanical discipline, • Willingness to travel as needed, typically up to 75% of the time (or more during your initial training period) - mostly overnight travel via car and plane throughout USA & Canada, • Valid driver license, • English proficiency, • Associates degree or equivalent training and/or experience, • At least a few years of field service experience, • Familiarity with reading schematics and wiring diagrams, • Hands-on experience with hand tools, • Working knowledge of multimeters for electrical testing, • Working knowledge of AC and DC up to 3 phase, • Strong understanding of computer hardware and software

Roquette is a family-owned global leader in plant-based ingredients and a leading provider of pharmaceutical excipients. Want to help us make a difference? Using plant-based resources, we collaborate with our customers and partners to imagine and offer ingredients to better feed people and treat patients. Each of our ingredients responds to unique and essential needs, and they enable healthier lifestyles. We are looking for our next Operations Manager within our Operations Team. The Operations Manager will be responsible for providing leadership and direction for the site's technical operations team and driving plant continuous improvement initiatives. The role directs and coordinates all activities of the process and automation engineers and partners with the Manufacturing Technology team and Capital Engineering team to ensure proper prioritization and technical oversight of operations and ensure continuous improvement activities are on track. The Operations Manager is a key member of the Newark site leadership team and supports and establishes a strong safety and productive culture. This position is located in Newark, Delaware. Compensation: The current salary range for this role is estimated to be $146,367 - $176,052. In addition, this position may also be eligible to earn performance-based incentive compensation. The specific compensation offered to a candidate will be influenced by a variety of factors including but not limited to skills, qualifications, experience, and location. What You'll Do: • Serves as proactive member of Management Team by providing technical expertise, continuous improvement leadership, and identifying and acting upon cost saving opportunities;, • Actively participates on the Site Leadership team to set direction and optimize overall site productivity;, • Shows courageous leadership by coaching, asking questions, and intervening when needed., • Challenges status quo and past norms to make the operation more safe and effective:, • Utilize process knowledge to drive performance with technical support teams;, • Interacts with other members of the leadership team, plant staff, and divisional cross-functional groups to optimize plant operations;, • Drive enforcement and continuous improvement of the Roquette Operating System for the site;, • Lead GEMBA program for leaders and managers;, • Ensure effective determination and implementation of operations corrective and preventive actions (CAPA);, • Lead and coordinate sitewide 5S activities;, • Ensure timely and effective execution of operations RCA investigations;, • Lead site efforts for productivity improvement plans and VCP (value creation plan);, • Lead technical team to continuously improve plant OEE;, • Ensure operations department objectives are aligned with site and business direction;, • Improve operations efficiencies and develop and implement best practices;, • Ensure effective daily management of the Operations technical team, which includes technical staff, and resident contractors when applicable;, • Provide technical expertise to analyze and resolve recurring issues that impact plant uptime;, • Implement Lean concepts, improve equipment reliability, operations productivity and optimize overall asset life cycle costs;, • Lead team to provide technical support in order to plan department operations;, • Lead team to provide data needed for bill of materials, yield, OEE, and other key metrics;, • Create, review, manage and share sitewide KPI's;, • Reviews production and operating reports and resolves operational, manufacturing, and maintenance problems to ensure minimum costs and prevent operational delay;, • Continuously works to improve the total cost of production (raw material, conversion cost and activity rate, etc.). May take a leadership role in maintaining the budget as delegated by the Site Leader;, • Develops strong partnerships with support functions such as EHS, Maintenance, Supply Chain, and others to drive improvement in the organization and assure alignment;, • Provide operational resources to support investments in projects that improves quality and capability to meet internal and external customer needs and corporate, group, division and site goals;, • Ensures the operation team is fully prepared for immediate response situations, including where technical resources might be needed to analyze process conditions and guide the response;, • Encourage identification and prevention of non-conformance to quality procedures and specifications;, • Ensure that investigations are conducted into any process deviations or non-conformances and develop and implement programs to prevent re-occurrence;, • Understand and anticipate customer needs and implement performance measurements responsive to such needs;, • Communicate continuous improvements in key measurements including on time delivery, product quality and process capability; What You'll Need: Education: • B.S. Degree in Chemical Engineering (highly preferred), Chemistry or related technical discipline or equivalent combination of education and experience., • Experience in food/pharma manufacturing operations preferred., • 5+ years' experience in an industrial setting in a learning, EH&S, Manufacturing, HR, Quality or work process related role preferred;, • Strong analytical, personal computer, organizational and leadership abilities., • Strong communication skills (written, verbal, and listening) and interpersonal skills., • Strong problem-solving ability., • Expert knowledge of process technology and Avicel manufacturing preferred., • Strong project management and communication skills;, • Ability to manage time, balance priorities, and manage conflict;, • Good analytical skills with demonstrated ability to consistently solve problems in a decisive and efficient manner;, • Computer skills (word processing, spreadsheets, graphics & database);, • Good working knowledge and understanding of Enterprise Resource Planning (ERP) systems with working knowledge of SAP highly desirable;, • Lean Six Sigma experience a plus;, • Experience in heavy industrial or chemical technical applications;, • Experience managing in a Union environment a plus;, • MBA helpful but not required. Work Environment • This is a full-time on-site position. Days and flexible hours of work are required to meet facility demands. AAP/EEO Statement Roquette is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. "AAP, EEO, Drug-Free Workplace" Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. If you identify yourself in this position, please apply byuploading your resume and let's start the journey together! Roquette is proud to be a global company where you can find personal and professional growth through multiple diverse experiences. Roquette strives to create a dynamic workforce while remaining firmly committed to equal opportunity by complying with EEO laws. As we continue to grow, Roquette understands that to be successful we must always be inclusive in our approach. To find out more about our products, values and sustainable development ambitions visit us at ___ and at ___

Robotics engineering role focused on FANUC programming and system delivery This Jobot Job is hosted by: Robert Donohue Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $80,000 - $115,000 per year A bit about us: We are an automation and robotics integrator supporting manufacturing operations with custom robotic solutions. Our work focuses on designing, programming, installing, and supporting industrial robot systems that improve production efficiency and reliability. Projects are hands-on and varied, with engineers involved from programming through commissioning and on-site support. This role supports multiple customer environments and is project-based rather than repetitive, with several new programming projects each year. Why join us? • Salary range: $84,000 – $115,000 (based on experience), • 401(k), • Medical and dental (individual and family), • Two weeks of vacation, • Profit sharing, • Retention bonus Job Details This position offers a mix of robot programming, installation, and system troubleshooting, with exposure to new projects throughout the year. Engineers in this role work directly with robot systems, electrical schematics, and I/O, rather than being limited to a single production line or site. The role includes competitive compensation, benefits, and bonus opportunities, along with the chance to work on FANUC-based automation projects across different applications and industries. Travel is limited and planned, typically averaging 25–30%. Primary Responsibilities • Program FANUC robots using HandlingTool, • Develop and support vision applications using FANUC iRVision, • Troubleshoot robot and PLC I/O issues, • Read and interpret electrical schematics, • Support system installation and commissioning, • 70% robot programming, • 20% installation and commissioning, • 4–5+ years of FANUC robot programming, • Experience with FANUC HandlingTool, • Vision programming experience (FANUC iRVision), • Ability to troubleshoot robot and PLC I/O, • FANUC RoboGuide, • Allen-Bradley PLCs and HMIs, • FANUC PickTool Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

JLL empowers you to shape a brighter way.Our people at JLL are shaping the future of real estate for a better world by combining world class services, advisory and technology for our clients.We are committed to hiring the best, most talented people and empowering them to thrive, grow meaningful care

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job Description Senior Industrial/Process Engineer New Jersey, Onsite, Full Time 150-200k (Based On Experience) Company Overview We are a large-scale manufacturing operation in New Jersey, constantly evolving and committed to technical excellence, efficiency, and innovation. Our engineering team includes specialists across multiple disciplines, and we are now seeking a strong, well-rounded leader who can bring these experts together to drive collaboration, growth, and continuous improvement. Position Overview We are seeking a highly experienced and technically strong Senior Engineering Leader who can guide, mentor, and elevate a diverse team of engineers. While each team member specializes in their area—process, industrial, mechanical, automation—the Senior Engineering Leader will unify their efforts, establish standards, and ensure best practices are adopted plant-wide. The right candidate is not just a subject-matter expert but a strategic, big-picture leader who can inspire engineers, lead by example, and drive measurable improvements across all spaces. You'll play a pivotal role in optimizing operations, training your team, and embedding a culture of continuous improvement. The Ideal Candidate • A well-rounded senior engineer with deep technical knowledge and leadership presence., • Proven ability to unify and guide specialized engineers toward shared goals., • Skilled in mentoring, training, and developing technical talent., • Naturally curious, always seeking ways to optimize systems, workflows, and operations., • Lead, mentor, and develop a multidisciplinary engineering team across process, industrial, and mechanical functions., • Establish plant-wide engineering standards and best practices to ensure efficiency, quality, and safety., • Partner with specialized engineers to identify challenges, improve workflows, and optimize facility spaces., • Drive automation, process upgrades, and system enhancements in alignment with company goals., • Promote knowledge sharing and training across engineering disciplines., • Support capital expenditure planning, cost models, and ROI analysis., • Bachelor's degree in Mechanical, Industrial, Process, or related Engineering field (Master's preferred)., • 10–15+ years of engineering experience within manufacturing environments., • Strong technical expertise across multiple engineering disciplines (process design, systems optimization, automation, facility layout)., • Proven leadership track record of managing, training, and growing engineering teams., • Experience leading cross-functional initiatives that improved efficiency, cost, or production scalability., • Excellent problem-solving, analytical, and project management skills., • 10+ years in high-volume manufacturing engineering., • Hands-on technical strength plus proven leadership of engineering teams., • Experience mentoring engineers and elevating team performance., • Competitive salary and performance-based incentives., • Medical, dental, and vision coverage., • 401(k) retirement plan with employer contributions., • Professional development and training opportunities. Email Resume: Apply Online: Refer a friend, get up to $1000!

Job DescriptionDescription: Overview A Building Automation Sales Representative is responsible for promoting and selling building automation systems and solutions to commercial, industrial, and institutional clients. They work closely with clients to understand their needs, provide tailored solutions, and ensure customer satisfaction. This role involves a combination of technical knowledge, sales skills, and customer relationship management. Key Responsibilities: Sales and Business Development: • Identify and target potential clients in the commercial, industrial, pharmaceutical and institutional sectors., • Develop and maintain relationships with key decision-makers and stakeholders., • Partner with engineering firms to be the controls provider of choice., • Understand clients' building automation needs and provide customized solutions., • Incorporate energy saving solutions with our delivery., • Collaborate with engineering and technical teams to design and propose appropriate systems., • Manage the entire sales process from lead generation to closing deals., • Provide ongoing support and follow-up to ensure customer satisfaction and retention., • Maintain accurate records of sales activities, customer interactions, and project details using Sales Force., • Prepare and submit sales reports, forecasts, and other documentation as required., • This role typically involves a combination of office work and field visits to client sites., • PTO, • 401(k) Matching, • 9 Paid Holidays, • Bonus Plan, • Company truck/fuel card, • Employee Referral program, • 8-hour Shift, overtime available, • EAP/Wellness Program, • Health/Dental/Vision Insurance, • Bachelor's degree in Business, Engineering, or a 10 years of job experience., • Proven experience in sales, preferably in building automation or a related industry., • Strong technical knowledge of building automation systems and solutions., • Excellent communication, negotiation, and presentation skills., • Ability to work independently and as part of a team., • Technical Aptitude: Understanding of building automation technologies and their applications., • Sales Skills: Ability to identify opportunities, develop strategies, and close deals., • Customer Focus: Commitment to providing excellent customer service and building long-term relationships., • Problem-Solving: Ability to analyze client needs and propose effective solutions., • Time Management: Efficiently manage multiple tasks and prioritize workload.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Will not relocate. US citizens need only to apply. Eastern Industrial Automation, Inc. (EIA) is seeking an experienced Vibration Technician for its growing customer base throughout the NJ, NY, PA, MD marketplace. We have an existing team of well-trained Field Analysts and Technicians to support this newly created position. EIA is a well-established Industrial Distributor, Manufacturer and Field Service Company to tens of thousands of customers throughout the East Coast. Due to our much decentralized, self-starting, professional family culture, we are growing at an aggressive pace! We are seeking a new team member to perform data collection and field service, in support of our local sales staff and existing customer base. Responsibilities: • Perform vibration data collection, vibration data analysis, and timely reporting of machine condition findings., • Perform routine and emergent data collection needs, to a diverse customer base., • Evaluate machinery health, and condition of all types of rotating equipment, through detailed analysis of vibration data., • Conduct failure analysis of rotating equipment to determine root causes of failure and help determine solutions to prevent reoccurrences., • Perform supportive services such as laser alignment, dynamic balancing and oil analysis, • Perform troubleshooting of equipment and instrumentation related to data collection systems., • Perform select field services such as changing sheaves and belts., • Proven experience including certification of ISO category one or equivalent preferred with machinery vibration analysis, • Minimum of two years’ experience in vibration data analysis., • Knowledge of vibration data and analysis techniques., • Experience interfacing with internal teams and external suppliers., • Strong mechanical aptitude and experience working around rotating equipment., • Experience with machine learning and innovation in machinery health assessments is preferred., • Must be willing to travel throughout the local designated market areas. Eastern Industrial Automation provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. The position is 40 hours a week; Monday through Friday, 8AM – 5PM and will report directly to the Engineering Service Manager. An automobile will be provided, gas card, laptop, and Emerson CSI vibration software monitoring equipment. Expected travel throughout the select area is 50-60% with occasional overnight stays. With our diversified product offering and customer base we offer a very stable and growing opportunity for the ideal candidate. Are you ready for a rewarding and challenging career in the distribution/manufacturing industry? We are looking for the best of those who are not afraid to roll up their sleeves to grow with our organization personally and professionally? Powered by JazzHR jIKtwG9aQe

Job Description Instrumentation Controls Technician Location: Lyndhurst, NJ Schedule: Monday – Friday | 2:00 PM – 10:30 PM (2nd Shift) Pay: $35 – $40 per hour Type: Contract-to-Hire Are you the kind of person who can look at a control panel, hear a weird machine noise, and immediately start diagnosing the problem in your head? If PLCs, instrumentation, and troubleshooting industrial equipment are your thing, this could be a great fit. We are seeking an Instrumentation Controls Technician to support a busy manufacturing facility in Lyndhurst, NJ. In this role, you will work with plant systems, instrumentation, and control equipment to ensure operations run safely and efficiently. You will also help maintain calibration programs, troubleshoot automation issues, and support plant operations when technical challenges arise. If you enjoy solving technical problems and working hands-on with equipment and control systems, this is a strong opportunity with a company that values technical expertise. What You'll Do * Troubleshoot and maintain PLC and control systems supporting plant equipment * Maintain and repair instrumentation, sensors, and electrical systems * Analyze and test computer control systems based on system design specifications * Support machine operating systems and control programs * Perform instrument calibration and calibration documentation * Manage calibration schedules and maintain compliance with ISO 9000 requirements * Diagnose issues with labeling equipment and automated systems * Perform scheduled maintenance on electrical and electronic devices * Provide rotational weekend on-call support for plant operations when required What We're Looking For * Strong troubleshooting and analytical skills * Solid electrical and controls background * Experience with PLCs (Allen-Bradley preferred) * Experience with pneumatic and hydraulic systems * Ability to read technical drawings, P&IDs, and ladder logic diagrams * Experience performing instrument calibration * Strong communication skills and ability to work independently or on a team * Experience in industrial manufacturing environments such as chemical, pharmaceutical, or food processing is preferred * Technical school training or related degree preferred * Experience with CMMS systems and smart instruments is a plus Additional Details * Schedule: Monday–Friday, 2:00 PM – 10:30 PM * Pay: $35–$40/hour * On-Call: Weekend rotation for plant support * Position Type: Contract-to-Hire * Location: Lyndhurst, NJ About Zing Recruiting Zing Recruiting is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, and gender identity), national origin, age, disability, genetic information, or any other protected status under federal, state, or local law. We are committed to fostering a diverse and inclusive workplace. #ZINGZIP #ZINGNJ Company DescriptionZing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.Zing Recruiting is dedicated to delivering candidates and client’s alike a great experience for each unique position. We specialize in finding dedicated professionals with the education, talent, and fresh perspectives – professionals at the top of their game. Professionals who have what it takes to be competitive and innovative in today’s market. We work to match candidates needs and requirements to our clients’ requirements and expectations. We work to find the right “fit” for both candidate and client.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Responsible for driving new business and growing key accounts across the assigned territory through strategic prospecting, relationship building, and technical solution selling. Develop and execute sales plans, interpret plans and specifications to build accurate estimates, and partner with internal engineering and operations teams to deliver BAS/BMS solutions that meet customer needs. Responsibilities: • Develop and execute a strategic sales plan to achieve sales targets and expand the customer base., • Conduct regular visits to clients and prospects to build relationships and understand their needs., • Interpret plans and specifications and develop estimates, • Present and demonstrate products and services to potential clients, highlighting their benefits and value., • Collaborate with internal teams to ensure timely delivery of products and services to clients., • Maintain accurate records of sales activities, customer interactions, and market feedback in the CRM system., • Identify new business opportunities and develop sales strategies, • Other duties as assigned. Required Qualifications: • Bachelor's degree in Mechanical Engineering, a related field or equivalent industry experience, • 2+ years of experience in outside sales in the building automation industry., • Strong understanding of sales principles and customer relationship management., • Ability to interpret plans & specifications and estimate projects., • Excellent communication and interpersonal skills., • An established network in the construction and facility management fields in the NY / NJ or Northeast area, • Experienced in working independently and managing time effectively., • Proven track record of strategic sales and sales territory management, • Valid driver's license and willingness to travel within the assigned territory. Preferred Qualifications: • 5+ years of experience with Building Automation Systems (BAS) or related technologies., • Familiarity with CRM software and sales analytics tools., • Demonstrated ability to close sales and meet or exceed targets., • Network of contacts within the construction industry., • Experience with Tridium Niagara-based control systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description Unique Opportunity with an expanding New Jersey Based Company; Bright and Collaborative Team; New and Interesting Automation System Design and Build Projects. Recession Resistant Industry, Managerial Buy-In towards using best of breed technology to provide top-notch solutions for our essential industry customers. About the role: The PLC Automation Controls Engineer specializes in designing, building, and optimizing automation control systems within a small dedicated team. This role focuses on new system design and build projects as well as system upgrades and optimization, reporting directly to the Engineering Manager. The engineer will develop and integrate PLC programming, HMI interfaces, and network configurations, ensuring seamless electrical automation operations. Desired Skills/Experience: • PLC Systems Design and Engineering experience; should be versed in Ladder Logic., • Experience with HMI Systems Software and user interfaces including customization, configuration and connectivity to the overall system; experience with Intellution (aka: iFIX) and or Wonderware (aka: InTouch) are pluses., • Experience designing systems with Electric Power Scaling to 'Step Up Power and Step Down Power'; should be familiar with Voltage Regulation, Dynamic Response, Impedance Regulation, Power Conditioning/Power Modulation or similar areas., • Experience using Electrical AutoCAD for layout and overall systems design (and customization), • Experience configuring and connecting industrial network communications to PLC Systems; should be familiar with things like EtherNet/IP, Profinet, EtherCAT, Modbus RTU, CanOpen or similar., • Experience with Data or Database connectivity to PLC Automation systems; should be familiar with OPC Servers, PC Drivers/Custom Scripts, PLC-to-SQL modules or similar, • Detail Oriented with Very Strong Oral and Written communication skills, • Experience Designing/Building Electrical Automation Systems for External clients or customers is a plus.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job DescriptionJob Summary: Electromechanic We are seeking a skilled and proactive Electromechanic to join our production facility. This role is responsible for maintaining, troubleshooting, and repairing electrical and mechanical systems on food processing equipment to ensure optimal performance. Key Responsibilities: • Perform preventive and corrective maintenance on processing machinery, packaging equipment, conveyors, and automated systems., • Diagnose and repair electrical issues including motors, sensors, PLCs, and control panels., • Troubleshoot mechanical problems involving gearboxes, belts, bearings, and hydraulic/pneumatic systems., • Collaborate with production and quality teams to minimize downtime and improve equipment reliability., • Maintain accurate maintenance logs and documentation., • Participate in continuous improvement initiatives and equipment upgrades., • Respond to emergency breakdowns and support production during critical operations.Qualifications:, • High school diploma, • Strong knowledge of electrical systems, mechanical components, and automation controls., • Familiarity with HACCP, GMP, and other food safety standards., • Ability to read technical manuals, schematics, and blueprints., • Excellent problem-solving skills and attention to detail. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Totowa,NJ. Application Deadline This position is anticipated to close on Apr 3, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description Machine Builder / Mechanical Assembly Technician A growing manufacturer of custom automation and industrial equipment is seeking a Machine Builder to assemble and support the installation of complex machinery used in production environments. This role is ideal for someone with strong mechanical skills who enjoys building equipment from blueprints, troubleshooting systems, and working closely with engineering teams to bring machines to life. Key Responsibilities * Assemble mechanical, electrical, and pneumatic components for custom machinery * Interpret blueprints, schematics, and technical drawings to ensure accurate builds * Troubleshoot and resolve mechanical issues during assembly and installation * Collaborate with engineering and design teams to improve machine performance and functionality * Perform equipment maintenance, adjustments, and repairs as needed * Maintain clear documentation of assembly procedures and updates to technical manuals * Follow all safety procedures and quality standards Qualifications * Strong mechanical aptitude and hands-on machine assembly experience * Ability to read and interpret blueprints and engineering drawings * Excellent troubleshooting and problem-solving skills * Strong attention to detail and ability to work both independently and as part of a team Education & Experience * High school diploma or equivalent required * Technical training or certification in mechanical technology, automation, or related field preferred * Previous experience as a Machine Builder, Mechanical Assembler, or Equipment Technician strongly preferred Physical & Work Environment * Work in an industrial manufacturing environment around mechanical equipment * Ability to stand, bend, climb ladders, and move throughout the facility * Manual dexterity to work with tools and machinery components * Ability to lift up to 50 lbs

Job Description The Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dayshift Field Service Engineer will carry the following Key Accountabilites: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • Connects with customers through remote software to troubleshoot and resolve various technical issues. KEY COMPETENCIES: • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less) Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job DescriptionCompany Description With over $2B in revenue, 80+ manufacturing facilities across 6 continents and over 9,000 employees worldwide, Signode is a leading manufacturer of a broad spectrum of transit packaging consumables, tools, software, and equipment that optimize end-of-line packaging operations and protect products in transit. Signode brings this extensive product portfolio together under hundreds of trusted brands to offer complete transit packaging solutions to its customers. We produce strap, stretch and protective packaging. We also manufacture packaging tools and equipment used to apply the bulk packaging materials. These commercial packaging products are used to pack, bundle, unitize, protect, and secure goods during warehousing and transit. Our company is a pioneer in the industrial packaging sector with a long history of customer-focused innovations in materials, processes and automation technology that have revolutionized the sector. Headquartered in Tampa, Florida, we are proud to be the Transit Packaging Division of Crown Holdings, Inc. We are excited to go to market as Signode and to share the portfolio of products, services and capabilities that make us the world’s premier end-of-line packaging company. Job Description Benefits: Signode offers a comprehensive benefits package to full-time employees, which includes health, dental, vision, 401k, paid time off, life insurance, wellness perks, and more. Benefits begin the month following the hire date. Salary: The hourly wage for this position ranges from $31.50 - $33.00 and varies based on specific responsibilities and geographic location. Starting hourly rate within this range will be determined based on the candidate's experience, qualifications, and/or skillset. Schedule: Monday through Friday 7am - 3pm with overtime based on road conditions Summary: The driver primary responsibility is to ensure product gets to it destination. The driver is responsible for inspecting the vehicle daily, planning route of travel to each destination, and ensure proper paperwork is completed for their loads. They must be aware of all safety hazards, policies, guidelines, and procedures associated with operating the vehicle. Essential Functions: • Delivering material in a timely manner to customers., • Inspecting vehicles for mechanical items and safety issues and perform preventative maintenance daily., • Planning routes and meet delivery schedules., • Maneuvering trucks into loading or unloading positions., • Completing paperwork, documentation, and data input in accordance with established procedures., • Collecting and verifying delivery instructions., • Reporting defects, accidents or violations., • Performing other related duties as required or directed by supervisor.Qualifications Education: High School diploma or GED, with CDL License. Experience: • Five years’ experience working as a CDL driver with no legal or safety incidents on record., • Have a Class “A” CDL license. Minimum of 3 years verifiable interstate driving experience, • Excellent safety driving record – no violations in the last 3 years., • No at fault accidents in the last 3 years, • Pass a pre-employment physical or possess a valid medical certificate (Long Form)., • Use GPS to stay informed of route information., • Safety & Security, • Customer Focused, • Communication (Oral & Written), • Results Oriented, • Time Management, • Organization/Planning Additional Information All your information will be kept confidential according to EEO guidelines. Reasonable Accommodation Statement To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities. Signode is committed to providing equal opportunities to all qualified applicants, including providing reasonable accommodations during our recruiting process. If you need any assistance or accommodation in applying for this position, please contact us at . The Company has reviewed this job description to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. Signode participates in E-Verify and will provide the Department of Homeland Security your Form I-9 information to confirm your authorization to work in the United States. Signode Industrial Group, LLC is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status.

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking an experienced, highly motivated Control Systems Engineer — LabView Developer to join its rapidly growing team. The Control Systems Engineer will have ownership of the design, development, and commissioning of the control system for complex equipment within Thea Energy’s stellarator fusion demonstration plant. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Work with a team of experts in developing controls for Thea Energy’s systems., • Architect, program, and document cutting-edge distributed Data Acquisition and Control (DAC) projects utilizing National Instruments hardware and software, such as LabVIEW, VeriStand, TestStand, SystemLink incorporating DAQ, PXI, cRIO, and RIO (FPGA) architectures., • Develop modular, readable, and reusable LabVIEW code, emphasizing reliability and continual improvement., • Create engineering tools, including both desktop and web-based testing applications., • Integrate VHDL and C codes into hardware-in-the-loop (HIL) systems, utilizing both NI and open-source hardware and software platforms., • Collaborate with hardware and systems engineers to define interfaces and requirements and ensure seamless integration of DAC/HIL solutions., • Troubleshoot and swiftly resolve issues in LabVIEW-based DAC/HIL systems., • Develop and execute comprehensive test plans., • Document design specifications, test procedures, and user manuals for automation and acquisition systems.Ideal Experience & Skillsets:, • Extensive experience as a control engineer on complex, large-scale systems., • Experience with magnetic confinement fusion, aerospace, or other highly technical industries., • B.S. or M.S. in Computer Science, Electrical Engineering, or a related physics or engineering discipline., • 5+ years of hands-on LabVIEW development experience; experience with VeriStand, TestStand and SystemLink., • Proven success in advanced LabVIEW programming, focusing on Data Acquisition and Control or HIL systems, within scientific, industrial, or research environments., • Proficiency with National Instruments hardware, including cRIO, PXIe, and expertise in both Windows and RT Linux environments., • Competency in HIL/SIL software architecture., • Proficient in the development and optimization of LabVIEW applications and LabVIEW Certification (Certified LabVIEW Developer and/or Architect) is advantageous., • Exceptional work ethic and communication skills.Company Benefits:, • Salary range $95,000-$160,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call.

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the team: The Fleet Operations Team is responsible for delivering uptime, performance, and visibility across Formic's growing fleet of deployed robotic systems. Operating at the intersection of automation engineering and real-world factory environments, the team ensures systems remain reliable, supported, and continuously improving. Fleet Operations plays a critical role in protecting customer production, reducing downtime, and strengthening long-term automation performance across a variety of robotic OEMs and manufacturing sectors. About the role: As a Robotics Field Service Engineer, you will serve as the front line of technical execution across Formic's deployed robotic cells. You will diagnose and resolve issues, perform preventative and corrective maintenance, support production environments, and represent Formic directly at customer sites. This role requires strong troubleshooting ability, composure under pressure, and disciplined documentation. Your work will directly impact fleet uptime, customer satisfaction, and system reliability. In this role you will: • Perform preventative, corrective, and predictive maintenance on robotic manufacturing cells, • Respond to remote and on-site escalations, diagnose root causes, and restore systems to operational status, • Support customer production environments and provide hands-on technical guidance to operators and technicians, • Log all service activity, asset updates, and spare part needs in CMMS tools such as MaintainX, • Coordinate scheduling and in-field support with customers, vendors, and internal teams, • Monitor system performance remotely using Formic dashboards and monitoring tools, • Document service work, root cause analysis, and follow-up actions with clarity and accuracy, • Identify recurring failure patterns and escalate systemic issues for broader improvement, • Build professional, trusted relationships with plant managers and site personnel, • Represent Formic with professionalism, safety compliance, and a customer-first mindset, • Participate in RCA sessions, site audits, and internal improvement initiatives, • 3+ years of hands-on field service experience supporting robotic or industrial automation equipment, • Strong troubleshooting skills across electrical, mechanical, and PLC or robotic control systems, • Ability to read electrical schematics, wiring diagrams, and pneumatic drawings, • Experience using CMMS platforms to track and report maintenance activity, • Comfortable with local travel up to 80% and overnight travel up to 50%, • Clear written and verbal communicator capable of producing structured service reports, • Experience with 6-axis robot brands such as Fanuc, KUKA, Yaskawa, ABB, or Universal Robots, • Familiarity with palletizing, case packing, pick-and-place, or conveyor systems, • Experience in food, beverage, packaging, CPG, or other high-speed manufacturing environments, • Prior customer-facing field experience, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$75,000—$120,000 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job DescriptionCompany Description With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description The Digital Revenue & Customer Experience Manager – Americas is a hands-on, managerial role responsible for defining, scaling, and governing Sika’s emerging digital revenue channel across the Americas Region reporting to the Digital Experience Director Americas together we will work on Sika’s digital transformation. This role will help Sika America’s DX team enhance and elevate the existing digital revenue pipeline—already implemented across the region—ensuring its expansion, adoption, and continuous improvement across the region Americas. At the same time, the role is responsible for building the CX governance model for the region, defining the standards, KPIs, and methodologies that will shape how Sika serves and retains customers in a digital-first world. This role defines the blueprint for how Sika grows, competes, and delivers value in a digital landscape offering the best customer experience. * Lead and develop the Digital Sales & Revenue (DSR) and U.S. Customer Experience teams across North America and Latin America, ensuring regional alignment and performance. * Own and scale the digital revenue channel in the Americas, accountable for adoption, results, process consistency, and cross-country coordination. * Design and govern the end-to-end digital revenue workflow, from lead capture and qualification through routing, follow-up, and sales handover. * Optimize and expand the digital revenue pipeline to improve conversion rates, revenue impact, and regional scalability. * Ensure unified, high-quality operation of digital tools (e.g., Salesforce, Pardot/MCAE) with standardized data, rules, and performance measurement. * Set and manage annual Digital Sourced Revenue targets, supported by regional dashboards tracking leads, pipeline, velocity, and revenue contribution. * Establish and standardize the Customer Experience (CX) framework across the Americas, including KPIs such as NPS, CSAT, CES, response time, and resolution metrics. * Integrate CX insights with digital revenue and service processes to enhance customer satisfaction and reduce friction across the full customer journey. * Drive digital transformation and continuous improvement through automation, innovation, pilots, and adoption of new tools and methodologies. * Lead multiple cross-functional, high-impact initiatives, translating regional insights into actionable plans with measurable business outcomes. Qualifications * Bachelor’s degree in Marketing, Business, Strategy, or a related field, with 5+ years of experience in digital revenue, lead management, CX, or commercial operations (preferably B2B/industrial). * Strong hands-on expertise with Salesforce (lead/opportunity workflows, reporting, dashboards) and Pardot/MCAE. * Proven experience leading regional or multi-country teams in complex business environments. * Deep understanding of digital lead lifecycles, qualification frameworks, scoring models, and routing logic. * Solid knowledge of CX methodologies and metrics (NPS, CSAT, CES), including building dashboards and scorecards. * Ability to design, govern, and scale complex operational processes across multiple markets. * Advanced analytical skills in pipeline performance, conversion metrics, revenue attribution, and SLA governance. * Effective cross-functional leader, collaborating closely with Sales, Marketing, Customer Service, and IT. * Strategic, adaptable, and self-driven leader with strong communication skills and the ability to influence without authority. * B2B digital or distribution models, and familiarity with global Group Marketing structures, helpful. * Spanish fluency a plus Additional Information Perks & Benefits • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics. We offer competitive salaries, aligned with local market benchmarks and the specific scope and responsibilities of each role. Compensation is determined based skills relevant to the position, education and/or training. We are committed to fair and equitable pay practices in accordance with applicable laws and regulations.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. We are seeking an Senior Application Engineer to be responsible for initial consultation with the customer, as well as estimating and proposal development for industrial automation solutions including food & beverage, life sciences, and chemical industries. The projects span the range of process control and machine control automation applications. You will also own and develop methods, tools, and processes in estimating and proposal development for the entire enterprise. You will: • Meet with customers to review the technical scope and engineering requirements and work with local E Tech Group Business Development Managers in the sales pursuit process., • Prepare work to be estimated by gathering proposals, blueprints, specifications, and related documents., • Quote normal Control Panel / PLC / HMI projects without much assistance, calling in engineering help only for niche cases., • Identify labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents., • Compute costs by analyzing labor, material, and time requirements., • Resolve discrepancies by collecting and analyzing information., • Present prepared estimate by assembling and displaying numerical and descriptive information., • Prepare special reports by collecting, analyzing, and summarizing information and trends., • Maintain cost database by entering and backing up data., • Maintain technical knowledge by attending educational workshops and reviewing technical publications., • Contribute to team effort by accomplishing related results as needed., • Bachelor's degree in Engineering or equivalent experience and educational background, • 5+ years of Industrial Automation experience directly related to design, controls, programming, and electrical engineering, • Past experience of extensive use of the Company's Methods, Tools, and Process specific to estimating and proposal management standards., • Understanding of ERP / Project Costing Systems and parametric estimation tools., • Extensive understand of customer plans, specifications, technical documentation as well as RFQ documentation, • Strong written and verbal communication skills, • A DNA comprised of collaboration and teamwork Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes full paid vacation, paid holidays, paid family leave and personal/sick time off.

Job Description The Graveyard Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dedidcated Field Service Engineer will be required of the follwoign KEY ACCOUNTABILITES: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • The desire to work in a nightshift setting ., • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less).Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job Description Who we are: Formic is on a mission to reshape American manufacturing by making automation accessible to every factory. As labor constraints rise, costs increase, and global competition intensifies, automation is no longer optional for manufacturers that want to stay competitive. We deliver automation through a Robotics-as-a-Service model that combines industrial robotics, proprietary software, and full-service support into a single, integrated solution. By removing the traditional barriers of cost, complexity, and risk, we enable manufacturers to deploy automation quickly and realize measurable gains in throughput, safety, and operational efficiency without large upfront capital investment. Backed by leading investors including Lux Capital, Initialized Capital, Blackhorn Ventures, and Mitsubishi HC Capital North America, Formic is scaling rapidly and building the foundation for a new era of high-performance, Made in America production. About the Go-To-Market Team The Go-To-Market Team is responsible for ensuring customers realize measurable value from the automation we deploy. From pre-deployment coordination through onboarding and long-term engagement, the team drives adoption, strengthens relationships, and ensures customers achieve meaningful operational outcomes. Customer Success serves as the connective tissue between customers and internal teams, ensuring expectations are clear, communication is proactive, and execution is coordinated. The team also captures customer feedback and insights to continuously improve the product, delivery experience, and long-term customer outcomes. About the role: As a Customer Success Manager, you will own the customer relationship from pre-deployment through long-term engagement, ensuring a seamless experience and sustained value realization. You will serve as the central point of contact for customer coordination, orchestrating internal teams, documentation, and communication to ensure onboarding and ongoing engagement are proactive, clear, and consistent. Success in this role requires strong operational discipline, the ability to anticipate risk, and a customer-advocacy mindset that surfaces feedback internally, improves the customer experience, and identifies opportunities to expand customer impact over time. In this role you will: • Own the customer relationship from pre-deployment through long-term engagement, • Serve as the primary point of contact for customer communication and non-technical coordination, • Drive successful onboarding by ensuring timelines, documentation, and internal handoffs are executed effectively, • Partner cross-functionally with Sales, Fleet Operations, and Engineering to align customer expectations and delivery execution, • Monitor customer health, engagement, and risk signals and take proactive action when issues arise, • Manage customer communications during key milestones, changes, and escalations to maintain trust and clarity, • Identify opportunities to expand customer impact by understanding operational goals and usage patterns, • Partner with Sales to support expansion opportunities through strong relationships and customer insight, • Capture and elevate the voice of the customer to inform product, process, and experience improvements, • 3–7+ years of experience in customer success, account management, client services, or customer-facing program management, • Proven ability to manage complex customer relationships and drive outcomes through cross-functional coordination, • Strong operational discipline, follow-through, and ability to manage multiple priorities simultaneously, • Experience working with industrial, manufacturing, hardware, robotics, or operationally complex customers preferred, • Excellent written and verbal communication skills with confidence in customer-facing conversations, • Comfort navigating ambiguity and evolving processes in a fast-growth environment, • Strong judgment and calm execution during escalations, shifting priorities, and time-sensitive customer needs, • Ability to identify expansion opportunities through strong relationships, customer insight, and operational outcomes, • Proficiency with CRM and customer workflow tools such as Salesforce, ticketing systems, or project tracking platforms, • Equity in Formic: Participate in our stock option program and share in the success of a fast-growing start-up backed by leading global investors, • Competitive & Uncapped Commission Structure: Designed to reward performance and impact in commission-eligible roles, • Comprehensive Healthcare Coverage: Medical, dental, and vision insurance through Blue Cross Blue Shield and Unum, with 99% of employee premiums covered and 75% coverage for dependents, with optional buy-up plans available, • Additional Insurance Benefits: FSA and DCFSA, life insurance, short-term disability, and long-term disability through Unum, all 100% employer-paid, • Employee Assistance Program (EAP): Fully funded by Formic, offering support when you need it most, • Paid Parental Leave Program: Up to 12 weeks of paid parental leave, • Company-sponsored 401(k): Invest in your future with our company-facilitated retirement savings plan, • Home Office Stipend: A one-time allowance for fully remote and hybrid employees to support an at-home or on-the-road work setup, • Monthly Cell Phone Reimbursement: Monthly stipend toward personal phone and internet expenses Final offers are customized based on experience, geographic location, market considerations, and a candidate's preferred balance of cash and equity. Our goal is to attract and reward top talent who will have significant impact, and we are open to thoughtful discussions to align on the right structure. Compensation Range:$100,000—$130,000 USD What we look for: We're building this company from the ground up, and every person we hire has an outsized impact on our culture, performance, and trajectory. While each team member brings unique strengths and perspectives, we look for people who align with our Operating Principles and embody them in action. If this sounds like you, Formic may be the right place for you! • Fearless Optimism: You make bold bets and default optimistic. You believe in the mission, aren't paralyzed by risk, and fear inaction more than failure. You see ambiguity as opportunity and bring energy to building what doesn't yet exist., • Create the Magic: You absorb complexity so customers don't have to. Whether your customer is external or internal, you focus on delivering experiences that are clear, fast, value-added, and outcome-driven. You don't say "not my job." You make things work., • Today, Not Tomorrow: You have a bias to action. You close the loop. You take extreme ownership. You understand that speed compounds, and you don't confuse activity with results., • Seek Truth: You think from first principles. You value data over ego and strong opinions loosely held. You're willing to challenge assumptions, including your own, in pursuit of the best answer., • Made of Rubber: You are resolute and adaptable. When things break or priorities shift, you rebound stronger. You treat setbacks as learning moments and move forward with grit. Formic is an equal opportunity employer. We do not discriminate on the basis of race, color, religion or religious creed, sexual orientation, gender, gender identity, marital status, family or parental status, disability, military or veteran status, or any other basis protected by law. All employment decisions are based on a person's merit, business needs, and role requirements. If you require further accommodations or have questions regarding accessibility of our roles, please reach out to . AI Use: At Formic, fairness and transparency are at the heart of our hiring process. We use AI-powered tools in some interviews to help our teams evaluate candidate responses, but all final hiring decisions are made by humans. You can learn more about how AI is used in our recruitment process by reviewing our AI Hiring Disclosure linked here.

Job Description Position Description A client of AlphaStaffHCM is seeking an experienced Senior/Principal Engineer to lead the design, integration, and development of photonic integrated circuits with integrated laser sources. The ideal candidate will have deep expertise in semiconductor laser physics, photonic device design, process integration, and system-level modeling. This role requires a hands-on leader capable of driving projects from concept through fabrication, testing, and qualification, with a strong focus on innovation and performance optimization for next-generation photonic systems. Duties and Responsibilities • Lead the design and modeling of integrated photonic circuits incorporating lasers, modulators, amplifiers, and passive components., • Develop and optimize epitaxial structures for laser integration on photonic platforms (e.g., Thin-film lithium niobate, Si photonics)., • Perform optical and electrical modeling using tools such as Lumerical, COMSOL, FDTD, and Matlab/Python codes., • Drive process integration efforts including mask design, fabrication flow development, and collaboration with foundry partners., • Conduct device characterization, performance analysis, and reliability testing to meet product specifications., • Provide technical leadership in cross-functional teams including epitaxy, process engineering, testing, and reliability., • Support product qualification efforts including wafer acceptance testing, reliability modeling, and failure analysis., • Ph.D. in Optics, Photonics, Electrical Engineering, or a related field., • 10+ years of industrial experience in semiconductor laser design, fabrication, and testing., • Strong background in photonic device modeling (FDTD, FDFD, PWEM, TMM, FEM)., • Proficiency with photonic design and simulation tools (Lumerical, COMSOL, Sentaurus, etc.)., • Experience with III-V semiconductor processes including lithography, etching, deposition, and characterization., • Demonstrated ability to lead technical projects and mentor junior engineers., • Experience with photonic crystal lasers (PCSEL), VCSELs, DFB, EML, or SOA devices., • Knowledge of integrated photonic platforms (Si photonics, InP, heterogeneous integration)., • Proficiency in programming for data analysis and automation (Python, Matlab, SQL, VBA)., • Experience with reliability testing, wear-out modeling, and qualification for high-volume production., • Familiarity with mask design tools (KLayout, L-Edit) and process integration for photonics., • Track record of innovation through patents, publications, or product development., • Experience working in a cross-cultural, multi-site R&D environment. Disclaimers: AlphaStaff, Inc. and the Client are equal employment opportunity employers and do not discriminate against any applicant or employee based on race, color, sex, sexual orientation, gender identity, religion, national origin, age, past or present military service, disability, genetic information, or any other basis protected by applicable federal, state, or local laws.

Job Description:\n\n Director of Service - Building Automation Systems (BAS) About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary:The Director of Service – Building Automation Systems (BAS) at Bosch Building Technologies North America (Bosch BT NA) is a critical leadership role responsible for driving the growth, efficiency, and excellence of our Building Automation Systems (BAS) service business. Reporting directly to the Senior Vice President, Services, this role shapes BAS service strategy, leads operational improvement initiatives, and ensures exceptional customer experiences while influencing the financial and operational performance of the Building Automation service portfolio. Responsibilities: Strategic Leadership Develop and execute the national Building Automation service strategy aligned with Bosch BT NA’s business objectives and customer expectations.Support a diverse team of service professionals, including managers, sales personnel (aligned to Service Sales Strategy), technicians, and support staff.Lead the Building Automation service roadmap, market shifts, and competitive opportunities while staying aligned with customer needs.Build and champion a service-first mindset, partnering with branch leaders to drive consistent culture and operational excellence.Drive alignment across branches and acquired companies through M&A integration, standardization, and cultural adoption. Customer Relationship Management Serve as a key escalation point for complex BAS technical issues, supporting branch and field teams to strengthen customer trust.Support national and local teams in customer meetings to expand Bosch BT NA footprint and maintain high satisfaction levels.Engage and support service leadership in meeting commitments for high priority and national accounts.Promote a culture of responsiveness, accountability, and customer advocacy. Service Delivery Optimization and Operational Excellence Influence performance outcomes for the Building Automation domain, including but not limited to; service agreement execution, renewal retention and performance, margin improvement, and broader KPI achievement.Establish SOPs for field services, including Service Agreement processes and Time & Material workflows.Evaluate, implement, and optimize tools, processes, service playbooks, and domain-specific standards that drive consistency and quality.Partner closely with branch teams to ensure consistent BAS service delivery, operational best practices, and continuous improvement. Technical & Market Expertise Maintain deep expertise in Building Automation systems, including controls architectures, integration protocols, HVAC fundamentals, analytics tools, and connected building ecosystems.Incorporate competitive intelligence and market trends into strategic and operational initiatives.Identify emerging customer needs and future service offerings to support Bosch BT NA’s growth trajectory.Support sales and service teams in strategic account reviews, customer meetings, and service‑centric solution development. Performance & Financial Metrics Drive Building Automation domain service performance outcomes by influencing revenue growth, margin improvement, service agreement execution, and operational efficiency across all support branches.Monitor and interpret key financial indicators, including labor utilization, agreement profitability, cost drivers, backlog health, and forecast accuracy that provides insights and recommendations that guide branch and regional leaders toward improved financial results.Collaborate with branch leadership and Service Business Operations to identify performance gaps, provide root-cause analysis, and co-develop corrective action plans tied to measurable operational improvement and financial uplift.Contribute to forecasting and planning through data‑driven insights on labor capacity, service demand, domain growth opportunities, and operational risks impacting financial performance. Cross-functional Collaboration Partner with the Digital Service Center (DSC) to enhance digital tool usage, drive adoption, and strengthen field enablement within Building Automation specific workflows.Collaborate with Service Business Operations to ensure Building Automation alignment on pricing strategies, service agreement estimation, ERP process compliance, and operational standards.Support M&A activities by evaluating Building Automation capabilities, aligning service playbooks, and accelerating operational adoption in newly acquired organizations. Health and Safety Compliance Ensure all service activities adhere to health, safety, and environmental regulations. Supervisor Duties: In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Professional CompetenciesResilience: Ability to maintain composure and adapt swiftly amidst uncertainty and rapid changes.Strategic Agility: Capacity to analyze situations critically and make prompt, well-informed decisions, considering diverse scenarios and potential outcomes.Entrepreneurial Mindset: Willingness to take calculated risks and explore innovative solutions to drive growth and capitalize on opportunities.Collaborative Leadership: Skill in fostering collaboration and teamwork across diverse stakeholders and departments to achieve common objectives.Resourcefulness: Ability to effectively leverage available resources, networks, and expertise to address challenges and capitalize on synergies.Attention to Detail: Capability to manage intricate details and nuances, ensuring thorough planning and execution of strategic initiatives.Emotional Intelligence: Aptitude in understanding and managing emotions to navigate sensitive situations, negotiate effectively, and build strong relationships.Adaptability: Willingness and ability to adjust strategies and approaches in response to evolving market dynamics, regulatory requirements, or unexpected developments.Clear Communication: Strong communication skills to articulate complex ideas, influence stakeholders, and navigate challenging conversations.Ethical Integrity: Commitment to upholding high ethical standards and integrity, ensuring transparency and compliance with regulations and corporate governance principles. Required Qualifications: 8–10 years of leadership experience in service operations and/or service sales, including oversight of service delivery for building automation, fire & life safety, and security systems.Demonstrated experience managing or directing field service teams and service project execution within (BAS)Knowledge of industry-specific regulations, legislative standards, and best operational practicesExperience in preparing, administering, and analyzing department budgets.A valid Driver’s License and ability to pass pre-employment screens Preferred Qualifications:Bachelor’s degree in business, engineering, or a relevant technical field Previous and progressive experience in Service/Operational leadership within a specific domain (BAS)Experience developing and implementing national service standards, including SOPs, domain specific service playbooks, and process guidelinesStrong background in service business growth strategy, including market/competitive analysisAbility to collaborate cross functionally with sales, operations, and field teams to drive service initiativesHarmonization of Service Departments through Merger & Acquisition activity Experience with Microsoft Dynamics 365 or similar ERP / Service Operations platforms Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment Sitting, standing, walking in office environments and construction sites The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Will be required to be on site with customers or contractors, with or without colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction. Driving to customer sites is required Limited overnight travel may be required Additional Information: Compensation: $135,000 - $180,000 (DOE) Working Hours: This position generally works Monday - Friday, overtime and on call when necessaryTravel Requirements: 30-40% Bosch Discounts: As an associate of Bosch, you will have access to various discount programs at Bosch Benefits: MedicalDentalVisionFlexible Spending Accounts401K w/ company matchLife/AD&D/LTDPaid Vacation/Sick/HolidaysEmployee Assistance ProgramPet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable AccommodationsIf you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description:\n\n Director of Service - Integrated Security (SEC) About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary:The Director of Service – Integrated Security at Bosch Building Technologies North America (Bosch BT NA) is a critical leadership role responsible for driving the growth, efficiency, and excellence of our Integrated Security (SEC) service business. Reporting directly to the Senior Vice President, Services, this role shapes SEC service strategy, leads operational improvement initiatives, and ensures exceptional customer experiences while influencing the financial and operational performance of the Integrated Security service portfolio. Responsibilities: Strategic Leadership Develop and execute the national Integrated Security service strategy aligned with Bosch BT NA’s business objectives and customer expectations.Support a diverse team of service professionals, including managers, sales personnel (aligned to Service Sales Strategy), technicians, and support staff.Lead the Integrated Security service roadmap, market shifts, and competitive opportunities while staying aligned with customer needs.Build and champion a service-first mindset, partnering with branch leaders to drive consistent culture and operational excellence.Drive alignment across branches and acquired companies through M&A integration, standardization, and cultural adoption. Customer Relationship Management Serve as a key escalation point for complex SEC technical issues, supporting branch and field teams to strengthen customer trust.Support national and local teams in customer meetings to expand Bosch BT NA footprint and maintain high satisfaction levels.Engage and support service leadership in meeting commitments for high priority and national accounts.Promote a culture of responsiveness, accountability, and customer advocacy. Service Delivery Optimization and Operational Excellence Influence performance outcomes for the Integrated Security domain, including but not limited to; service agreement execution, renewal retention and performance, margin improvement, and broader KPI achievement.Establish SOPs for field services, including Service Agreement processes and Time & Material workflows.Evaluate, implement, and optimize tools, processes, service playbooks, and domain-specific standards that drive consistency and quality.Partner closely with branch teams to ensure consistent SEC service delivery, operational best practices, and continuous improvement. Technical & Market Expertise Maintain deep expertise in Integrated Security systems, including controls architectures, integration protocols, HVAC fundamentals, analytics tools, and connected building ecosystems.Incorporate competitive intelligence and market trends into strategic and operational initiatives.Identify emerging customer needs and future service offerings to support Bosch BT NA’s growth trajectory.Support sales and service teams in strategic account reviews, customer meetings, and service‑centric solution development. Performance & Financial Metrics Drive Integrated Security domain service performance outcomes by influencing revenue growth, margin improvement, service agreement execution, and operational efficiency across all support branches.Monitor and interpret key financial indicators, including labor utilization, agreement profitability, cost drivers, backlog health, and forecast accuracy that provides insights and recommendations that guide branch and regional leaders toward improved financial results.Collaborate with branch leadership and Service Business Operations to identify performance gaps, provide root-cause analysis, and co-develop corrective action plans tied to measurable operational improvement and financial uplift.Contribute to forecasting and planning through data‑driven insights on labor capacity, service demand, domain growth opportunities, and operational risks impacting financial performance. Cross-functional Collaboration Partner with the Digital Service Center (DSC) to enhance digital tool usage, drive adoption, and strengthen field enablement within Integrated Security specific workflows.Collaborate with Service Business Operations to ensure Integrated Security alignment on pricing strategies, service agreement estimation, ERP process compliance, and operational standards.Support M&A activities by evaluating Integrated Security capabilities, aligning service playbooks, and accelerating operational adoption in newly acquired organizations. Health and Safety Compliance Ensure all service activities adhere to health, safety, and environmental regulations. Supervisor Duties: In accordance with applicable Company policies/procedures and Federal/State laws, will perform the following supervisory responsibilities: planning, assigning, and directing work; coaching and appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Professional CompetenciesResilience: Ability to maintain composure and adapt swiftly amidst uncertainty and rapid changes.Strategic Agility: Capacity to analyze situations critically and make prompt, well-informed decisions, considering diverse scenarios and potential outcomes.Entrepreneurial Mindset: Willingness to take calculated risks and explore innovative solutions to drive growth and capitalize on opportunities.Collaborative Leadership: Skill in fostering collaboration and teamwork across diverse stakeholders and departments to achieve common objectives.Resourcefulness: Ability to effectively leverage available resources, networks, and expertise to address challenges and capitalize on synergies.Attention to Detail: Capability to manage intricate details and nuances, ensuring thorough planning and execution of strategic initiatives.Emotional Intelligence: Aptitude in understanding and managing emotions to navigate sensitive situations, negotiate effectively, and build strong relationships.Adaptability: Willingness and ability to adjust strategies and approaches in response to evolving market dynamics, regulatory requirements, or unexpected developments.Clear Communication: Strong communication skills to articulate complex ideas, influence stakeholders, and navigate challenging conversations.Ethical Integrity: Commitment to upholding high ethical standards and integrity, ensuring transparency and compliance with regulations and corporate governance principles. Required Qualifications: 8–10 years of leadership experience in service operations and/or service sales, including oversight of service delivery for building automation, fire & life safety, and security systems.Demonstrated experience managing or directing field service teams and service project execution within (SEC) Knowledge of industry-specific regulations, legislative standards, and best operational practicesExperience in preparing, administering, and analyzing department budgets.A valid Driver’s License and ability to pass pre-employment screens Preferred Qualifications:Bachelor’s degree in business, engineering, or a relevant technical field Previous and progressive experience in Service/Operational leadership within a specific domain (SEC)Experience developing and implementing national service standards, including SOPs, domain specific service playbooks, and process guidelinesStrong background in service business growth strategy, including market/competitive analysisAbility to collaborate cross functionally with sales, operations, and field teams to drive service initiativesHarmonization of Service Departments through Merger & Acquisition activity Experience with Microsoft Dynamics 365 or similar ERP / Service Operations platforms Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment Sitting, standing, walking in office environments and construction sites The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate Will be required to be on site with customers or contractors, with or without colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction. Driving to customer sites is required Limited overnight travel may be required Additional Information: Compensation: $135,000 - $180,000 (DOE) Working Hours: This position generally works Monday - Friday, overtime and on call when necessaryTravel Requirements: 30-40% Bosch Discounts: As an associate of Bosch, you will have access to various discount programs at Bosch Benefits: MedicalDentalVisionFlexible Spending Accounts401K w/ company matchLife/AD&D/LTDPaid Vacation/Sick/HolidaysEmployee Assistance ProgramPet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable AccommodationsIf you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email . Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

If you are a current Jazz employee please apply via the Internal Career site.Jazz Pharmaceuticals is a global biopharma company whose purpose is to innovate to transform the lives of patients and their families.We are dedicated to developing life-changing medicines for people with serious diseases

Recruiting Maintenance Supervisor 2 for Manhattan Psychiatric Center.Manhattan Psychiatric Center (MPC), an Office of Mental Health (OMH) Joint Commission-accredited facility, is recruiting a Maintenance Supervisor 2 to join its team.Schedule is Monday through Friday from 7:00 AM to 3:30 PM with pas

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

Maintenance Supervisor with Family Owned Industry Leader / $35-$50 an hour depending on Experience / Room for Growth and Great Benefits This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary: $35 - $50 per hour A bi

Job Summary This is an excellent opportunity to blend your Operating Room experience with your informatics or data analysis education/experience.This will be located onsite in the Bronx.Job Description Identify and support field sales efforts with one primary customer through clinical and educationa

Salary: $30 - $42 per hour A bit about us: A growing manufacturer of industrial machinery is seeking a Field Service Technician to provide installation, startup, commissioning, and technical support at customer facilities.

Required Skills & Certifications 35 years industrial or commercial electrical experience Journeyman Electrician License or Relevant Trade School Degree Experience in a manufacturing or industrial setting Strong knowledge of the National Electrical Code (NEC) Proficient in electrical diagnostics, tro

Collaborate with cloud, network, and IAM teams to standardize and automate common operational tasks Support identity-driven automation use cases such as access provisioning, role-based access, and lifecycle events Operational Excellence Reduce manual effort and operational risk through automation an

Brookdale Senior Living - 590 Old Hook Road - Responsibilities: Keeping our communities running in top-notch condition by performing maintenance on HVAC, elevator, fire and sprinkler equipment, generators, landscape, kitchen equipment and emergency pull cord equipment; Perform general maintenance pr

Lead HR for a dynamic NYC office where you’ll shape culture, drive employee experience, and enjoy competitive pay, great benefits, and real room to grow! This Jobot Job is hosted by: Sierra Johnson Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Salary:

FedEx - 58 60 55 Drive - Responsibilities: Provide timely, quality maintenance for FedEx vehicle fleet and ground support equipment.Document work with appropriate repair orders and parts ordering using FedEx computer systems.Ensure work is in accordance with OSHA and DOT standards.Guide and support