Lighting engineer jobs in New Rochelle, New YorkCreate job alerts

We're seeking a Electrical Technician who's ready to put your skills to work on projects that matter - and build a career with a company that's building North America. Job Title: Electrical Technician | Req ID: 16415 | HR Contact: Kara Elizabeth O'ROURKE| Location: Ravena Cement Plant NY ABOUT THE ROLE \n The Electrical Maintenance Technicians at the Amrize Ravena, NY cement plant work as part of a team to ensure the uninterrupted operation of the plant and quarry in order to maximize operational efficiency. These employees work in an environment of continuous training and improvement; to maintain, troubleshoot and repair plant and quarry mechanical, mobile, and electrical equipment in accordance with plant and mine operating, MSHA, and safety guidelines. This position will report to the Electrical Supervisor. WHAT YOU'LL ACCOMPLISH \n\n • Dismantles, repairs, and reassembles complex mechanical, mobile, quarry, and electrical equipment.\n, • Keep up-to-date on all maintenance and safety procedural changes and be instrumental in developing new procedures as required.\n, • Write and/or contribute to daily reports and other reports about special projects or incidents as well as use computers for entering work orders, equipment history, etc.\n, • Report maintenance problems to the appropriate supervisor, coordinator or engineer for action and/or participate in corrective actions if appropriate.\n, • Perform necessary tasks to ensure good housekeeping for a safe and efficient operation.\n, • Fill out and follow up on work orders and assist when necessary in: locating and issuing stores materials.\n, • Make preventive/proactive inspections and document findings as determined by the maintenance coordinator and continuous improvement groups.\n, • Identify, report and assist in resolution of safety and environmental concerns and work practices that may affect the Health & Safety of employees or other parties.\n, • As required, explores, understands, and applies new trade tools, techniques, and technologies so as to promote continuous improvement and maintain state-of-the-art skills and methods.\n, • Follow all Amrize and MSHA safety procedures and any company initiatives and be an active participant on the Joint Health and Safety Committee and in the development of new procedures such as but not limited to lock out tag out and Job Safety Analyses (JSA) / Job Plans.\n, • Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors.\n\n WHAT WE ARE LOOKING FOR \n Required Education: A High School diploma or GED. \n Required Experience: 5+ years as an Industrial Electrician \n Required Language: English The selection of employees shall be in accordance with the selection criteria as established by the company. \n Following the initial selection process all jobs will be filled in accordance with Article III. Desired experience with trouble shooting and repairing. Basic understanding of electrical, mechanical, hydraulic and pneumatic systems. \n Certificates, Licenses, Registrations: Valid Driver's License \n Physical Demands: The Physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee will frequently be required to walk on rocky, irregular surfaces that may be muddy and in reduced lighting conditions. The employee is occasionally required to sit. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 90 pounds. Specific vision abilities required by this job include close vision, distant vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to high, precarious places; fumes or airborne particles, confined space, outside weather conditions, low lighting, artificial lighting, and explosives. The employee is regularly exposed to wet and/or humid conditions, proximity to electrical equipment, and vibration. The noise level in the work environment is usually moderate and occasionally loud. Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. \n We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. Amrize North America Inc. participates in E-Verify and will provide the federal government with your I-9 information to confirm that you are authorized to work in the United States. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted. PROTECT YOURSELF FROM RECRUITMENT FRAUD The only way to apply for a position at Amrize is through our official Careers website. Be cautious of unsolicited offers or requests for information from other sources. Learn how to protect yourself from recruitment fraud here: Fraudulent Job Offers Policy

About This Position: Project Engineer will assist with design development of commercial, institutional and residential related projects. Design experience should include layout, grading, water, wastewater, stormwater and other infrastructure facilities. Occasional field visits for purposes of investigations and construction phase support services. Essential Job Functions: • Site design and layout of vehicular and pedestrian circulation, parking and loading., • Roadway design, including street and sidewalk plans and profiles., • Utility design, including plans and profiles of water and sanitary sewer services., • Drainage and stormwater management design in accordance with NYSDEC requirements., • Grading and erosion control plans., • Proficiency with AutoCad/Civil 3D to assemble and manage AutoCAD set of design plans., • Coordinate with subconsultants regarding geotechnical services, landscape and lighting plans., • Construction administration and observation services., • Assist with developing application packages to be submitted to municipal board for review that comply with the following:, • SEQR review, including compliance with SEQR procedural requirements., • State and Federal environmental laws., • Local zoning, subdivision and land use regulations., • Local and generally accepted design and engineering standards., • Consistency with a municipality's Comprehensive Plan or other relevant Planning reports, • Oversight of entry level Assistant Project Engineers and technicians including, but not limited to, delegation of tasks, promoting quality standards, scheduling and coordinating of project deliverables. Job Requirements: • Bachelor's degree in civil engineering from an ABET accredited institution., • A Professional Engineer (P.E.) license in New York State or ability to obtain is required., • 5-10 years of experience in a similar role., • Excellent verbal and written communication skills are required., • Strong organizational skills are required., • Proficient with AutoCAD/Civil 3D software preferred., • Ability to multi-task and work under pressure in a fast-paced environment., • Ability to work efficiently, both independently and in a team environment., • Knowledge of construction methods of general excavation, pavement and utility installation., • Knowledge of federal, state and local permitting and the process involved., • Ability to verbally present site plans and reports to municipal land-use boards., • Contribute to a Project Manager's preparation of proposal scope & fees., • Knowledge is a plus for hydrologic and hydraulic modeling and design of stormwater management systems., • Certifications in CPESC and CPSWQ is a plus. Pay Range: Albany - $44/hour - $60/hour Poughkeepsie - $44/hour - $63/hour Westchester - White Plains - $47/hour - $66/hour Pay is based on applicant's ability/experience and will be rated accordingly. EXTRAs At Creighton Manning, continuous learning and mentoring are part of our DNA. There are opportunities to advance your career, either on the technical track towards Project Manager or into various corporate leadership positions. Team members get 360 reviews with input from peers and managers, to get a broad picture of their contributions. EducationBachelors of Engineering (required) ExperienceProficient with AutoCAD/Civil 3D software (preferred) 5 - 10 years: Experience in a similar role. (required) Licenses & CertificationsProfessional Engineer (required) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description The Manufacturing Engineer sits between Allied Maker's Design team and the outside world of partner vendors. When a tolerance doesn't behave, a finish won't hold, a material fights the process, or a vendor asks a question that could change the part, this is the person who answers, and then loops back to Design with the improvement. The Manufacturing Engineer is a hands-on problem solver whose work keeps fixtures buildable, beautiful, and on schedule. Key Responsibilities Vendor Technical Liaison • Serve as the primary technical contact between Design Engineering and partner vendors (machining, spinning, casting, glass, alabaster, wood), • Resolve vendor questions about tolerances, materials, finishes, and process capability while preserving design intent, • Support QC on supplier quality issues: investigate root cause, implement corrective actions, and verify effectiveness Design for Manufacturability (DFM) • Review designs with Design Engineering for manufacturability, tolerance realism, assembly fit, and cost before release, • Propose actionable design improvements to improve yield, cost, and schedule while maintaining design intent, • Maintain a library of DFM lessons learned Process & Tolerance Ownership • Own tolerance stack-up analysis on critical features, • Resolve conflicts between design intent and vendor capability, • Define inspection and acceptance criteria with QC, • Lead first-article reviews and process qualification for new vendors and parts Continuous Improvement • Partner with Assembly, Pre-Production, and Quality to resolve recurring issues from vendor parts or upstream design, • Track the cost of poor quality and lead-time impact from vendor issues and report trendsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, • 3–5 years of manufacturing engineering experience with vendor interaction, • Strong knowledge of machining, spinning, casting, and finishing processes, • Fluent in GD&T (ASME Y14.5), tolerance stack-ups, and process capability, • Strong communication skills across technical and non-technical stakeholders, • Organized, decisive, and able to own issues through resolutionPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom manufacturing, • CAD experience (Fusion or similar), • Familiarity with UL 1598 / UL 8750, • Lean / Six Sigma experience, • Experience working with Northeast US vendorsCompensation & Benefits, • Salary: $95,000 – $120,000 annually (based on experience), • Discretionary bonus, • Medical, dental, vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Mix of desk work, shop floor time, and vendor interaction, • Active shop environment; PPE required where applicable, • Occasional travel to vendor facilitiesAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$95,000—$120,000 USD

Job DescriptionDescriptionThe Design Engineer will be a critical part of our team, focused on developing and refining our lighting fixtures. This position requires a blend of creativity, mechanical engineering skills, and a deep understanding of lean manufacturing principles to enhance efficiency, reduce waste, and contribute to the sustainable growth of Allied Maker. The successful candidate will bring a hands-on approach to modeling, prototyping, and optimizing our products, ensuring they meet our high standards of design and functionality. Key Responsibilities • Model lighting fixture hardware and assemblies in Fusion 360, catering to diverse manufacturing processes including CNC Machining, Bending, Metal Spinning, Glass Blowing, Water-Jet Cutting, 3D Printing, and Woodturning., • Use the MarkForged X7 3D printer to develop jigs that streamline metal finishing, assembly, and fabrication processes., • Engage with a cross-functional team, applying lean manufacturing principles to refine and improve production workflows and outputs., • Operate under the guidance of the Senior Design Engineer to generate custom lighting designs and modifications that align with Allied Maker's aesthetic and quality standards., • Aid the Engineering Team in managing product improvements, organizing parts for procurement, and maintaining accurate documentation within our ERP software., • Prototype new designs and engage in hands-on assembly to evaluate and enhance production efficiency. Qualifications • A Bachelor's Degree in Industrial Design, Product Design, Mechanical Engineering, or related field, with at least 7 years of experience. Background in lighting design or a related industry is preferred., • Demonstrated knowledge of lean manufacturing principles, with a track record of applying these to improve processes and reduce waste., • Expertise in Fusion 360, with proficiency in Netsuite or similar ERP systems., • Strong written and verbal communication skills, and the ability to work collaboratively with a team., • A proactive, detail-oriented approach, with the capacity to take ownership of projects and drive innovation. What We Offer • 401(k) with matching, health, dental, and vision insurance., • Paid time off and parental leave., • A dynamic work environment that fosters creativity, innovation, and growth. If you're driven by design excellence and keen on contributing to a leading name in the lighting industry through innovative engineering and efficient manufacturing practices, Allied Maker is your next destination. Submit your resume, a compelling cover letter, and any relevant work samples that showcase your expertise in design engineering and lean manufacturing.

Job Description Seeking an Electrical Engineer with a focus in lighting. This individual should have experience in lighting audits, lighting design, and lighting commissioning. Applicant should have knowledge of lighting systems and their components, as well as LL88 and NYC Energy Code, and lighting energy calculations. 3+ years of experience and EIT certification preferred. Experience with Excel and CAD/REVIT required. Duties • Lighting Audits, • Lighting Design, • Electrical Design, • Electrical Construction Oversight Salary Range: $80,000-$120,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Electrical Engineering degree or equivalent experience, • Autocad/Revit, • Knowledge of NYC Electrical Code, LL87, LL88 Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Paid Parental Leave, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description The Pre-Production Coordinator is the central nervous system for the parts that build every Allied Maker fixture. Servicing the entire company from our core catalog of components, this role owns the accurate interpretation of bills of materials, the skilled pulling of parts from inventory, and the smooth handoff of those parts to downstream departments - metal finishing, glass, wood, electrical, assembly, and custom. It takes technical know-how, an eye for detail, and genuine discernment about parts and materials to do this job well. Key Responsibilities BOM Interpretation & Kit Preparation • Read and interpret bills of materials (BOMs) for standard collection fixtures and custom orders; identify every part required and resolve ambiguities with Design and Pre-Production II., • Pull parts from the central inventory in the correct quantities, verifying part numbers, revisions, and finish variants before release., • Stage parts for delivery to the correct department at the correct stage of production (machining, finishing, glass, wood, electrical, assembly, custom). Inventory Management in WMS • Work fluently inside Allied Maker's warehouse management system (WMS): receiving transactions, location moves, cycle counts, and issue-to-job transactions., • Maintain part-location accuracy and flag discrepancies between physical stock and system counts for resolution., • Keep bin locations organized, labeled, and logical so any team member can locate a part quickly. Technical Judgment • Use material and finish knowledge to distinguish visually similar parts (e.g., brass finishes, sister-SKU hardware, glass shapes) and catch mis-picks before they reach the floor., • Escalate quality concerns on pulled parts to the Quality Control Engineer rather than passing suspect material downstream., • Suggest improvements to bin layout, labeling, and pick routes based on day-to-day experience. Cross-Functional Coordination • Communicate daily with Procurement, Manufacturing, Assembly, and Custom teams about incoming work and stock positions., • Support new product introductions by staging parts for prototypes and first production runs.Required Qualifications, • 1–3 years of experience in warehousing, inventory, kitting, or light manufacturing., • Strong attention to detail and a discerning eye; able to tell very similar parts apart., • Comfortable working with computer-based inventory systems, scanners, and structured transactions., • Ability to read and understand a bill of materials and simple mechanical drawings., • Physically able to stand, walk, climb a ladder, and lift up to 40 lbs throughout the day., • Reliable, organized, and team-oriented; willing to be flexible as priorities shift.Preferred Qualifications, • Prior experience in custom manufacturing, lighting, furniture, or luxury goods., • Familiarity with NetSuite, WMS, or ERP-based inventory tools., • Working knowledge of metal finishes (brass, aluminum, plating), glass, and wood species., • Forklift or order-picker certification.Compensation & Benefits, • Base salary range: $55,000 – $70,000 annually (based on experience), • Annual discretionary bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off, holidays, and parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoes and prescription eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop, • Active shop-floor environment; safety glasses and closed-toe footwear required, • Requires standing, walking, reaching, climbing, and lifting up to 40 lbs regularlyAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$55,000—$70,000 USD

Job Description The Systems Engineer is the connective tissue between Allied Maker's teams and the tools they rely on: NetSuite, Autodesk Fusion, Wrike, the custom WMS, and the integrations that tie them together. This role goes beyond administration. The Systems Engineer is an integrator of design, planning, and operations, someone who understands how a fixture flows from design through shipping and builds systems that make that flow faster, cleaner, and more measurable. They refine workflows, build automations, and help leadership see team targets clearly. Key Responsibilities Platform Administration • Own day-to-day administration of NetSuite (items, BOMs, work orders, inventory, POs, reports, saved searches, roles), Autodesk Fusion / Fusion Manage, and Wrike, • Maintain user access, permissions, and licenses across platforms; manage onboarding/offboarding, • Ensure the custom WMS remains well-integrated with NetSuite and reflects physical operations accurately Integration & Automation • Build and maintain integrations between NetSuite, Fusion, Wrike, and the custom WMS, • Design automations (SuiteFlow/SuiteScript, Wrike automations, webhooks, scheduled jobs) to reduce manual handoffs, • Partner with Design, Manufacturing, and Operations to identify high-impact automation opportunities Workflow Design & Team Targets • Translate real-world workflow (design → engineering → vendor → receiving → finishing → assembly → ship) into system workflows and stage gates, • Build dashboards and reports that surface team targets, lead times, and bottlenecks, • Partner with department leads to refine status fields, definitions of done, and handoff protocols Reliability & Change Management • Document system configurations and changes; manage release processes for customizations, • Train teams on workflows and provide Tier-2 support for system issues, • Evaluate and implement new tools, modules, or integrationsRequired Qualifications, • Bachelor's degree in Systems Engineering, Industrial Engineering, Computer Science, or related field (or equivalent experience), • 3–5 years of experience administering and extending NetSuite in a manufacturing or inventory-driven environment, • Working knowledge of Autodesk Fusion / Fusion Manage and Wrike (or similar tools), • Proven ability to design workflows and build automations, • Familiarity with SQL, SuiteScript, or similar scripting tools, • Strong communication skills and ability to translate operational needs into system solutionsPreferred Qualifications, • NetSuite SuiteScript 2.x or Administrator certification, • Experience integrating a custom WMS with NetSuite, • Experience with iPaaS tools (Celigo, Workato, Boomi, Zapier), • Background in manufacturing or make-to-order environments, • Experience with BI tools (Looker, Tableau, Power BI)Compensation & Benefits, • Salary: $100,000 – $130,000 annually (based on experience), • Discretionary bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, holidays, parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoe and eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove workshop, • Primarily office-based with frequent time on the shop floor, • Requires seated computer work with occasional light liftingAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$100,000—$130,000 USD

Job Description AI / Perception Lead Engineer Company Overview Wild West Systems is an American defense technology company with the mission to equip the civilized world with superior and affordable arms and advanced technologies – to dominate the battlefield of present and future threats, in a new era of asymmetrical warfare. We fuse versatile domain experience with novel approach and creativity to change the paradigm of defense – both for military arenas and civilian soft targets. We're an early stage startup, rapidly moving and growing. General Qualifications Deep love for America and passion for Wild West System's mission. Self-starter, capable of performing tasks as an individual as well as working well in a team. Servant-leader mentality, extreme ownership, willing to participate in different and rapidly changing projects in a dynamic environment. Bias for action. ITAR REQUIREMENT: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here. Position Overview We are seeking an AI / Perception Lead Engineer to own and deliver the perception layer of our autonomy stack. This is a high-impact role focused on building real-time computer vision and sensor fusion systems that operate reliably on constrained edge hardware in dynamic environments. This is not a research-only role. You will be responsible for taking perception systems from concept → prototype → field deployment, working across software, hardware, and real-world testing. Responsibilities • Develop and deploy real-time object detection, classification, and tracking systems, • Optimize models for edge deployment (Hailo, Jetson, ARM, etc.), • Build multi-sensor perception pipelines (camera, lidar, etc.), • Improve robustness under real-world conditions (motion blur, occlusion, lighting), • Integrate perception outputs into downstream autonomy systemsRequired Skills and Experience, • Strong experience with modern CV models (YOLO, transformers, tracking systems), • Experience training, fine-tuning, and deploying models, • Experience with edge inference optimization (TensorRT, ONNX, etc.), • Strong Python + C++ (or Rust) skills, • Experience working with real-time video pipelinesPreferred Skills and Experience, • Experience with Hailo or similar accelerators, • Experience with multi-object tracking (ByteTrack, DeepSORT), • Experience with Roboflow or similar dataset pipelines, • Experience deploying models on embedded systemsWork Location This role is assigned onsite at our Great Neck, New York or Leander, Texas location. In-person work is required. Benefits We are always looking for good people! Wild West Systems is committed to providing its employees with competitive salaries and benefits to increase employee satisfaction and productivity. Health Insurance: 100% coverage for employees, 90% for spouse/family Vision and Dental: 100% Coverage 401(k): Available to all employees *We do not work with staffing companies. Direct applicants only*

Job DescriptionA multi-discipline engineering firm with over 70 years in business is looking for a Senior Electrical Engineer for their White Plains, New York office! Responsibilities: • Design electrical systems (power distribution, stand-by power generation, lighting, communication, fire alarm, security systems), • Manage team of electrical engineers in a variety of project design and development tasks:, • drawings, • calculations, • cost estimates, • specifications, • client communication, • contractor submittal reviews, • Review design documents, • Assist with business development initiatives, • Mentor/train junior staff Requirements: • B.S. degree in Electrical Engineering from an accredited program, • 5+ years of consulting experience (designing building power, lighting, communication and security systems), • Experience with HVAC and plumbing systems preferred, • PE License, • Extensive knowledge of the architectural/engineering industry (Federal, State, and local laws/regulations), • Experience using Outlook and Microsoft Office (or similar software), • LEED Accreditation, • Working knowledge of AutoCAD and Revit preferred Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description The Assembly Engineer is dedicated to the Assembly department. This role designs and optimizes how Allied Maker fixtures are put together, ensures every assembler is trained to the right method, documents every meaningful change, and holds the line on UL compliance in both assembly and QC. The Assembly Engineer is the person who walks the bench every day, improves the work, and makes craft and consistency compatible at scale. Key Responsibilities Assembly Methods & Optimization • Study and optimize assembly methods across the fixture portfolio: sequence of operations, fixturing, tools, takt, and ergonomics., • Design and build bench fixtures, jigs, and tooling that make quality easier and throughput higher., • Drive continuous-improvement initiatives (Lean/Kaizen) to reduce cycle time, rework, and ergonomic risk without losing the hand-crafted feel. Documentation & Change Control • Own the library of assembly work instructions (clear, illustrated, and current) for every fixture., • Drive disciplined change control so that improvements and corrections are documented and rolled out cleanly. Training & Capability • Build and maintain a structured training program for assemblers, including onboarding, cross-training, and certification for critical operations., • Coach assemblers on new methods and verify competency when standards change., • Support new-product introductions with pilot builds and first-article training. UL Compliance in Assembly & QC • Maintain compliance with applicable UL standards (e.g., UL 1598, UL 8750) in assembly operations and in final QC inspection., • Serve as the primary internal point of contact for UL files, construction details, and field evaluations when required., • Partner with the Quality Control Engineer to ensure final inspection reliably catches anything that would compromise UL listing or customer quality.Required Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, or equivalent hands-on experience., • 3–5 years of manufacturing or assembly engineering experience in a discrete-manufacturing environment., • Proven experience authoring work instructions, building fixtures, and running structured training., • Working knowledge of UL standards for lighting (UL 1598 / UL 8750) or comparable safety-listed products., • Strong Lean/CI toolkit (5S, standard work, value-stream thinking, 5-Why/8D)., • A people-first posture: the ability to teach, coach, and earn trust with experienced assemblers.Preferred Qualifications, • Direct experience with UL lighting compliance, including maintenance of UL files., • CAD skills (Fusion or similar) for fixture design., • Prior work in lighting, luxury goods, or custom furniture manufacturing., • Lean / Six Sigma certification.Compensation & Benefits, • Base salary range: $85,000 – $110,000 annually, commensurate with experience., • Discretionary annual performance bonus., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off, paid holidays, and paid parental leave., • Employer-paid life and disability insurance; employee assistance program., • Safety shoes and prescription safety eyewear allowance for shop-facing roles., • Employee discount on Allied Maker products.Work Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; significant daily time on the assembly floor with additional time at a desk for documentation and design., • Active shop-floor environment; safety glasses and closed-toe footwear required in designated areas., • Requires standing and walking for extended periods and occasional lifting up to 40 lbs when handling fixtures or tooling.About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$85,000—$110,000 USD

Job Description The Quality Control Engineer owns incoming inspection and supplier quality for all parts, components, and sub-assemblies entering Allied Maker's production process. Working across materials including hand-blown glass, machined and spun metals, alabaster, and wood, this role defines quality standards, builds inspection systems, and partners with vendors to resolve issues at the root cause. This role is critical to maintaining the craft, consistency, and reliability expected from Allied Maker products. Key Responsibilities Incoming Inspection Across Materials • Develop inspection plans, sampling strategies, and acceptance standards for each material type, • Inspect glass for dimensional accuracy, clarity, inclusions, and color consistency, • Inspect machined/spun metals for dimensional conformance, wall thickness, and surface finish, • Evaluate alabaster for veining, translucency, and structural integrity, • Verify wood components for species, moisture content, joinery, and finish quality Supplier Quality & Vendor Development • Act as primary quality contact for vendors, • Lead root-cause analysis (8D, 5-Why, Fishbone) and corrective actions, • Qualify new suppliers and parts via First Article Inspection (FAI), • Track supplier performance (defects, responsiveness, quality consistency), • Conduct supplier audits and site visits Nonconformance & Continuous Improvement • Disposition nonconforming material (rework, RTV, scrap, use-as-is), • Lead cross-functional MRB decisions, • Analyze defect trends and cost of poor quality, • Drive improvements to reduce scrap, rework, and disruptions, • Partner with Assembly & Manufacturing Engineering on upstream improvements Standards & Documentation • Build and maintain inspection standards and boundary samples, • Create clear, repeatable inspection work instructions, • Maintain calibration of measurement tools and traceable records, • Ensure documentation is properly recorded in NetSuite and internal systems, • Support UL compliance by validating incoming componentsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, Materials, or Manufacturing Engineering (or equivalent experience), • 3–5 years of quality engineering experience in manufacturing or custom/luxury goods, • Strong ability to read engineering drawings and GD&T (ASME Y14.5), • Proficiency with precision measurement tools (calipers, micrometers, gauges, etc.), • Experience leading root-cause investigations and supplier corrective actions, • Ability to define and standardize subjective quality (visual / craftsmanship), • Strong communication skills with internal teams and external vendorsPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom furniture, • Familiarity with UL 1598 / UL 8750 standards, • ASQ certification (CQE, CQA) or Lean / Six Sigma, • Experience with natural materials (stone, glass, wood, alabaster), • Experience with NetSuite or similar systemsCompensation & Benefits, • Salary: $75,000 – $95,000 (based on experience), • Discretionary performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, paid holidays, parental leave, • Employer-paid life and disability insurance, • Safety shoe & eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site in Glen Cove workshop, • Split between the inspection area, production floor, and desk work, • Exposure to shop environment (dust, finishes, moving equipment), • PPE required in designated areas, • Must be able to stand/walk for extended periods, • Lift up to 35 lbs and handle fragile materials, • Occasional travel to vendorsAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$75,000—$95,000 USD

Job DescriptionMulti-discipline engineering firm in business for decades is looking for an Electrical Discipline Engineer for their White Plains office! Job Responsibilities: • Design electrical systems such as lighting, power distribution, stand-by power generation, communication, fire alarm and security systems, • Manage a group of Electrical Engineers in project design and development tasks such as drawings, calculations, cost estimates, and specifications, • Respond to client questions and comments, • Review contractor submittals and provide clarifications during construction, • Review electrical department design documents for completion, • Ensure department personnel adhere to accepted industry and company standards, • Assist in the development of company quality standards and procedures, • Work closely with management and electrical department leadership to develop and implement electrical short- and long-range manpower and production plans to meet project objectives, • Assist in business development initiatives to pursue new projects including participation in client presentations Requirements: • BS in Electrical Engineering from an accredited program, • 10+ years’ experience with a consulting engineering firm designing building power, communication systems, lighting, and security systems, • Extensive knowledge of the architectural and engineering industry, including the Federal, State, and local laws and regulations that pertain to the industry, • P.E. license, • LEED Accreditation, • Knowledge of AutoCAD, EasyPower, and Revit desired, • Supervisory experience, • Experience with HVAC and plumbing systems a plus Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! www.harrisonconsultingsolutions.com 517-906-6926

Job Description Position Summary: WAC Group is seeking a Firmware Engineer to support the development, testing, and maintenance of embedded firmware for connected lighting and IoT products. The ideal candidate has hands-on experience with C/C++ on microcontrollers, is comfortable debugging hardware and software issues, and is eager to grow into broader ownership of firmware features, communication protocols, and production support. This role will work closely with senior firmware, hardware, app, cloud, QA, and manufacturing teams to deliver reliable smart products for commercial and residential markets. Key Responsibilities: • Design, implement, and maintain embedded firmware in C/C++ for ARM Cortex-based microcontrollers, including STM32, Nordic nRF, ESP32, and similar platforms, under guidance from senior engineers., • Support development of wireless and wired device communication features using technologies such as Bluetooth, Thread, Wi-Fi, RS485, DMX512/RDM, DALI/D4i, UART, SPI, I2C, and proprietary protocols., • Debug firmware issues using standard tools such as JTAG/SWD debuggers, oscilloscopes, logic analyzers, protocol analyzers, and serial console tools., • Assist with bootloader, OTA firmware update, device provisioning, encryption, and key management features according to established architecture and security practices., • Develop device-side interfaces and services that support integration with mobile apps, cloud platforms, manufacturing systems, and internal test tools., • Interface with analog and digital sensors, drivers, radios, power circuits, and other embedded hardware components., • Contribute to manufacturing test solutions, hardware validation tools, and Python-based automated test frameworks., • Use established build systems, CI/CD workflows, GCC, IAR, Git, Jira, and related development tools to produce reliable release candidates. Critical Success Factors: • Deliver well-structured, testable, and maintainable firmware for smart modules, gateways, and connected devices while following established architecture and coding standards., • Contribute to reliable communication features for wireless and wired protocols, including Bluetooth Mesh, Wi-Fi, DMX512/RDM, RS-485, DALI/D4i, and related smart lighting technologies., • Demonstrate steady growth in technical ownership by writing clear code, participating in reviews, resolving defects, and supporting unit, integration, regression, and system-level testing. Requirements: • BS in Electrical Engineering, Computer Engineering, Computer Science, or equivalent industry experience., • Minimum 5 years of experience in embedded firmware engineering, or equivalent hands-on project experience for exceptional candidates., • Working proficiency in C/C++ for resource-constrained embedded systems., • Experience with 32-bit ARM microcontrollers and common embedded development/debugging workflows., • Familiarity with in-circuit debugging techniques using JTAG, SWD, serial consoles, and related tools., • Working knowledge of hardware communication protocols such as SPI, UART, I2C, BLE/Mesh, DMX, DALI, Wi-Fi, or similar technologies., • Hands-on lab experience with hardware bring-up, prototyping, and debugging using oscilloscopes, logic analyzers, protocol analyzers, or similar instrumentation., • Basic proficiency in scripting languages such as Python or Bash for automation, tooling, and test support., • Experience with software configuration and issue management tools such as Git and Jira., • Understanding of design for manufacturability, testability, reliability, and cost is preferred., • Experience supporting product validation, manufacturing test, or production troubleshooting is preferred., • Strong technical documentation, written communication, and verbal communication skills., • Ability to follow structured engineering processes while applying creative problem-solving to technical challenges., • Willingness and ability to travel domestically and internationally as required., • Ability to collaborate with third-party development partners and external engineering teams is preferred., • Mandarin language proficiency is a plus. We recognize people as our most valuable asset. Our competitive salary and benefits package include paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please submit your resume as directed. Due to the high volume of applications, only candidates who meet the qualifications will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job Description Allied Maker is hiring a Client Relations Manager to own the client relationship from first contact through close. This is a senior, client-facing sales and account management role for a polished professional who can speak the language of designers, architects, and discerning principals; carry meaningful accounts; and represent the brand at the highest standard with minimal ramp. The Client Relations Manager is the primary point of contact for inbound inquiries, active projects, and key trade accounts. They produce accurate quotes, move orders forward, and convert relationships into long-term specifying behavior. They are visible from day one, expected to operate confidently before fluency is complete, and to set the standard the rest of the client-facing team is measured against. Key Responsibilities Client Communication & Relationship Ownership • Serve as the primary point of contact for designers, architects, and high-end residential clients across email, phone, and in-person showroom interactions., • Speak and write with clarity, composure, and intention; represent Allied Maker in voice and tone the way a client would expect from a luxury studio., • Hold the room with experienced clients; respond confidently under partial information without guessing, over-explaining, or losing control of the interaction., • Build long-term trust with specifying accounts so Allied Maker becomes a default specification, not a one-off purchase. Sales, Quoting & Order Coordination • Generate accurate, clean quotes and revisions; manage the full lifecycle from inquiry to closed order without items falling through., • Recognize buying signals and move deals forward at the right moment without resorting to pressure tactics., • Discuss price, lead time, terms, and trade with confidence; protect the brand's standards while keeping the client moving., • Coordinate cross-functionally with production, design, and leadership to ensure commitments made to the client are commitments the business can keep. Account Development & Brand Representation • Own a book of trade accounts; deepen those relationships through follow-through, product expertise, and consistent presence., • Represent Allied Maker at showroom visits, trade events, and select client meetings; match the tone of designers and architects in the room., • Identify opportunities to grow specification within existing accounts and surface them to leadership., • Mentor junior client-facing staff; set the bar for showroom and email interactions and reinforce the standard by example. Process, Systems & Follow-Through • Keep client and project information accurately recorded in Allied Maker's CRM and internal systems with support from the Systems Engineer and Client Strategy leadership., • Close loops reliably; nothing slips, nothing requires reminder, and escalations happen at the right time for the right reasons., • Continuously absorb product, materials, pricing, and process information; apply it immediately in live client conversations without repetition., • Handle moments of client frustration with patience and emotional intelligence; protect internal information and understand the difference between what you know and what you should say.Required Qualifications, • 6+ years of client-facing experience in design, A&D, luxury retail, hospitality, gallery, or a comparable environment where standards were high and internalized., • Demonstrated track record managing high-value accounts, complex client relationships, or a quota-bearing book of business., • Professional polish that shows up by nature, not by instruction: voice, appearance, conduct, and written communication reflect the standard of the brand without prompting., • Real phone and in-person presence: warm, composed, articulate; able to hold a room with experienced clients and walk a discerning designer through a complex quote without losing control of the conversation., • Strong written communication with attention to tone, grammar, and clarity., • Sound judgment under partial information: knows when to answer, when to escalate, and when to slow a deal down; does not guess or overcommit., • Composure under pressure: remains calm when challenged on price, lead time, or specification; does not become flustered or hesitant., • Real-time learning style: retains information quickly, applies it immediately, does not require repetition., • Reliability without supervision: consistently on time, present for full hours, comfortable operating within structure rather than testing its edges., • Available 9:00 AM to 6:00 PM, Monday through Friday, on-site in Glen Cove, without scheduling conflicts., • Emotional intelligence and discretion; able to read a room, handle frustration calmly, and protect internal information appropriately., • Proficiency with standard office tools (email, calendar, Google Workspace or Microsoft 365, spreadsheets) and CRM systems.Preferred Qualifications, • Direct experience selling to or working alongside architects, interior designers, and lighting designers., • Background in lighting, furniture, luxury home, or another high-touch design category with experienced specifier audiences., • Experience carrying a quota, an account list, or full ownership of client outcomes in a luxury or trade-driven sales environment., • Familiarity with CRM or project management tools (NetSuite, Salesforce, HubSpot, Wrike, or similar)., • Experience mentoring or setting the standard for more junior client-facing staff., • Personal curiosity about materials, craft, and design — not just professional interest.Compensation & Benefits Allied Maker offers a competitive total-rewards package benchmarked to the Long Island / NYC metro market: • Base salary range: $95,000 – $120,000 annually, commensurate with experience., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off, paid holidays, and paid parental leave., • Employer-paid life and disability insurance; employee assistance program., • Employee discount on Allied Maker products.Work Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop and showroom, Monday through Friday, 9:00 AM to 6:00 PM., • Primarily a client-facing, office and showroom environment with regular presence in client meetings and occasional time on the production floor., • Occasional travel for trade events, key client visits, and showroom representation., • Requires sitting and standing throughout the day, moving between client areas and workstations, and occasional light lifting up to 25 lbs for samples and materials.About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$95,000—$120,000 USD

Job DescriptionSenior Electrical Engineer - Critical Facilities - White Plains, NY (hybrid /remote) Our client is a Leading Engineering Design and Commissioning Company that has a national footprint. They specialize in MEP critical facilities and provide design, commissioning, consulting and management expertise. They have a mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation and Hyperscale Companies. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. This challenging and unique role will involve acting as a senior electrical engineer, designing critical power systems for new data centers and expansions to existing data centers. The ideal candidate will have past experience designing electrical systems specifically for large data centers. They will have experience and in-depth knowledge of Electrical Power Systems / Power Distribution System design and installation. Previous experience with electrical equipment design to include Generators, UPS systems, PDUs and electrical switchgear is a must. They will be proficient using AutoCAD MEP and Revit MEP to develop electrical construction models and documents. You will help lead the design and effectively work with / communicate with all the trades and stakeholders involved in the project. Responsibilities: • Manage projects, create designs and plans, provided and gather specifications, and execute assignments in a multidisciplinary electrical engineering design role for all sizes of data center facility design projects- enterprise data centers, Colocation Providers and for Hyperscale Companies., • Create Conceptual Designs gathered from meetings with the client for Field Engineer focus, • Work with Management to respond to RFPs; Review shop drawings and submittals; Review and respond to RFIs, • Establish project objectives, policies, procedures and performance standards within boundaries of company policies Put these in clear concise work statement for the field, • Represent the company in project meetings as needed, • Collaborate with all design staff and oversee full cycle electrical design activities, • Interact closely with the Project Management Team to produce construction documents, develop and edit project specifications and lead the construction administration process, • Execute and lead design teams and design projects of complex scope, • Perform intermediate to advanced electrical design tasks including development of electrical distribution systems and topologies, infrastructure and equipment layouts and selection / sizing of equipment, • Utilize AutoCAD and Revit software to prepare drawings, • Review and / or prepare book or sheet specifications for electrical systems, • Develop and / or review sequences of operations, • Assist in proposal development including project scope, schedule and budget, • Effective management of project design team including resource forecasting and coordination, • Identify potential project scope changes and aid in development of strategies to minimize impact and control deviations from estimated costs and project deadlines, • Support contact for design clients and builds effective, long-term client relationships, • May direct / coordinate interns / other engineering and technical staff, • Survey existing building conditions / Conduct Field Observations and prepares technical reports of findings and commissioning support, • Collect data and other information for construction documents, • Prepare project design and construction documents, • Review and complete punch lists and project closeout documents, • Prepare project progress reports for internal and external stakeholders, • Update and maintain shop drawing and RFI log Qualifications: • 8-15 years experience, • Experience working for MEP firms, an A/E firm, • Bachelor's Degree in Electrical Engineering or similar engineering degree, • Licensed PE / EIT a Plus, • Experience with the design process of building systems for data center and mission critical projects, • Knowledge of electrical systems found in buildings including single/three phase power distribution, lighting and lighting controls, grounding and life safety systems, • Knowledge of codes and specifications for the design of electrical systems including National Electric Code, Life Safety and Energy Conservation Codes, • Technical / design software including short circuit coordination and arc flash studies, equipment sizing, underground feeder calculations and lighting calculations, • Previous experience using: Revit MEP projects, AutoCAD MEP, BIM a plus, • Experience working on data center /data center / mission critical projects, • Extensive Experience with Electrical Power Systems and Equipment - UPS / Uninterruptible Power Supply, Generators, Batteries, switchgear , Power Distribution Units, Backup Power , Electrical Power, Power Systems , Medium Voltage , High Voltage , etc., • Experience working on complex data center/mission critical facilities design projects a must, • Proficient in design and calculation software MS Office: Excel, Word, Project, PowerPoint, Teams SKM Powertools, EDSA or ETAP experience is desirable • Exceptional organizational skills for file management, • Skilled with various electrical topologies and distribution systems, • Skilled in performing code analysis including selection of equipment, wiring, etc. to meet code requirements, • Ability to successfully work independently, • Self Starter, self motivated, and should prioritize well, • Effective Communicator – emails, phone and face to face, • Complete assignments accurately and with attention to detail, • Analyze and prepare documents, reports and correspondence, • Communicate effectively directly with clients and at times serve as primary point of client contact, • Ability to work under pressure and meet close deadlines, • Ability to effectively plan and delegate the work of others, • Organizational skills, with the ability to manage multiple tasks simultaneously, • Previous Previous experience in the Military / Military veterans in all branches that have experience with Electrical / Mechanical is a huge plus (Navy nukes- EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force – Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc.)Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: xecygz66zc6wx6iraifwhhi5ha@crelate.net After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, https://www.pkaza.com/jobs/ If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job Description Position Summary: WAC Group is seeking a Senior Embedded Platform Engineer to own the on-premises appliance platform for the commercial smart lighting product line. This is a hands-on engineering role: you will design, build, and ship the appliance stack, zero-touch provisioning infrastructure, and OTA update systems that run-in customer facilities ranging from open to air gapped solutions. The ideal candidate combines deep Linux and edge systems expertise with working knowledge of AWS cloud services used to provision, manage, and connect deployed appliances at scale. Key Responsibilities: • Design, build and maintain an embedded Linux platform including boot loaders, kernel, drivers and user space., • Board Bring-up: Collaborating with hardware engineers to bring up new hardware, debugging boot issues, configuring the device tree and testing performance., • System Building & Imaging: Creating and managing production-ready Linux images using build systems such as Yocto, Buildroot or custom spins of standard distributions such as Debian., • Platform Security: Implementing system hardening, secure boot, and managing vulnerability patches., • OTA Updates: Developing robust, secure over-the-air update mechanisms. Experience creating robust platforms that are hardened against power loss and failed OTA updates., • Performance Optimization: Tuning system boot time, memory usage, and power consumption., • Design and maintain the appliance stack - Docker Compose deployment, systemd services, containerized MQTT broker, local Postgres, OIDC auth sidecar, and WireGuard/Relay integration for zero-friction site deployment., • Build and maintain VM appliance images (OVA, QCOW2, VHDX) for Tier 1 site distribution., • Architect and implement zero-touch provisioning - device identity (serial + certificate), provisioning service integration, and automatic vpn setup. Controllers must boot-to-claimed with zero manual configuration., • Design and own the OTA update pipeline - signed manifest validation, atomic container updates, health-check-gated rollback strategies, and offline update paths via signed USB bundle for air-gapped deployments., • Partner with firmware, mobile, and cloud teams to define the appliance API surface, deployment contracts, and integration patterns between the on-premises console and Cloud Portal., • Evaluate and standardize the AWS cloud services used in the provisioning, relay, and management plane - including Fargate, Aurora, Cognito, and ECR - to meet performance, reliability, and cost targets., • Implement best practices for CI/CD, infrastructure-as-code, and release management to ensure reliable and repeatable appliance and cloud deployments., • Design and maintain monitoring and alerting for site health - heartbeat telemetry, update status reporting, and local diagnostics accessible to non-technical installers and customer IT staff., • Triage and resolve production issues related to device provisioning, updates, local connectivity, VPN tunnels, and on-premises infrastructure - prioritizing based on customer impact and SLA commitments. Critical Success Factors: • Customer-Centered Execution Communicates complex technical concepts clearly, builds trust with customers and partners, and delivers solutions that meet real-world performance. • Technical Excellence & Rigor - Sets and enforces high standards for scalability, observability, security, and operational discipline. “Good enough” is not sufficient., • Systems Thinking & Intellectual Curiosity - Understands the full IoT ecosystem and anticipates downstream impacts. Continuously evaluates emerging technologies and architectural trade-offs., • End-to-End Ownership - Takes full accountability for the appliance platform’s architecture, reliability, security, and performance - proactively identifying risks and driving resolution across both on-premises and cloud tiers., • Cross-Functional Leadership - Aligns firmware, application, cloud, and product teams around cohesive architectural decisions that serve both technical and business objectives. Requirements: • Bachelor’s degree in computer science, Electrical Engineering, or equivalent practical experience. 7+ years of software engineering experience, including 4+ years building and operating edge/appliance systems or production Linux infrastructure., • Expert-level Linux systems administration - Debian/Ubuntu, systems, apt/dpkg packaging, firewall configuration (UFW/iptables), and automated OS provisioning (preseed, cloud-init)., • Languages: Strong Proficiency in C, C++, and scripting languages (Python, Bash)., • Linux Internals: Deep understanding of the kernel, device tree, file systems and user-space libraries., • Build Systems: Expertise in Yocto/OpenEmbedded, Buildroot and rpi-image-gen., • Debugging: Experience with JTAG, GDB, and oscilloscopes for hardware/software debugging., • Proven experience with Docker and Docker Compose - service dependency management, container image optimization, health checks, and fleet-wide update strategies., • Hands-on experience with networking fundamentals - WireGuard, mDNS, NTP, DHCP, MQTT (EMQX or Mosquitto), and NAT traversal., • Working knowledge of AWS services relevant to IoT and edge deployments - Cognito, Fargate (ECS), Aurora/RDS, S3, Route 53, ECR, and IoT Core (or equivalent device provisioning infrastructure)., • Experience with VM image creation (Packer, cloud-init) and multi-format appliance distribution (OVA, QCOW2, VHDX)., • Familiarity with PKI and device certificate infrastructure - TLS client certificates, certificate authorities (step-ca or AWS Private CA), and key rotation strategies., • Experience with infrastructure-as-code (Terraform or CloudFormation), CI/CD pipeline design, and automated deployment strategies., • Hands-on experience with observability tooling (CloudWatch, Prometheus, Grafana, or equivalent)., • Strong understanding of security best practices - identity and access management, encryption at rest and in transit, and vulnerability mitigation for edge-deployed systems., • Mandarin language proficiency is a plus., • Willingness to travel domestically and internationally as required. We recognize people as our most valuable asset. Our competitive salary and benefits package include paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, please submit your resume as directed. Due to the high volume of applications, only candidates who meet the qualifications will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Senior Project Manager – Corporate Workplace Interiors.Our client is an award-winning provider of innovative design solutions.Headquartered in New York City with satellite offices in Long Island.They currently have an immediate need for an experienced Senior Project Manager with more than 10 years

Leonetta NYC is an upscale Mediterranean restaurant located in the heart of Manhattan's Murray Hill neighborhood.Known for blending contemporary elegance with the warm and inviting atmosphere of Mediterranean dining, the restaurant offers a memorable culinary experience.Under the leadership of celeb

Qualifications Bachelor’s or Associate degree in Engineering, Architecture, Construction Management, or a related field required; equivalent certifications will be considered.

The role requires close interaction and coordination with other project managers, engineers, and management across multiple sites and organizations, including close collaboration with stakeholders at NNL, BPMI, Naval Reactors, and subtier suppliers, to ensure successful completion of project objecti

Assistant General Manager - Fordham Rd - Bronx.Full time 364-368 E Fordham Road, Bronx, NY, US 10458.Forget what you know about old-school industry rules.When you work at Old Navy, you're choosing a different path.From day one, we've been on a mission to democratize fashion and make shopping fun aga

Partner with Product, Engineering, Design, and PMO peers to deliver features and capabilities aligned with business goals.

Location: White Plains, NY 10601 (hybrid 3 days onsite).Duration: 12+ months (possibilities of extensions).The Project Manager will be heavily involved in the planning, execution, and oversight of infrastructure projects.This position involves meticulous coordination of project teams, ensuring timel

Location: White Plains, NY (3 days Onsite).At Cogent Infotech, we believe in creating opportunities that empower individuals and transform organizations.With over 23 years of excellence in consulting and talent solutions, we pride ourselves on building inclusive workplaces and driving innovation in

Duration: 12 months contract (with possible extension) Project Overview The Project Manager will lead the planning, execution, and delivery of IT infrastructure projects, ensuring projects are completed on time, within budget, and aligned with business objectives.This role works closely with cross-f

Dynamic Productions USA is an industry leading entertainment production company specializing in live events, experiential activations, brand installations, and large-scale productions.We partner with leading brands, agencies, and talent to bring immersive, in-person experiences to life through seaml

Join a boutique 20+ year old, 40-person Engineering Firm as a Lead Mechanical Engineer with team & technical leadership responsibilities. This is a senior technical and leadership role for a seasoned healthcare HVAC engineer who is ready to combine hands-on engineering excellence with strategic

The General Manager is responsible for maximizing sales, providing an exceptional shopping experience for the customer, and managing the store's visual and operational standards, including the store's shrink %, wage cost and Clienteling.The General Manager is responsible for staffing, training and d

Reporting to the Director of Operations and Project Management, the Project Manager will serve as the primary project authority, working cross-functionally with engineering, service, sales, and customers to deliver systems that include UPS, generators, switchgear, and more — while maintaining budg

Collaborate with facility management, architects, and other engineering disciplines to ensure seamless integration of new occupants and machinery. Monitor and inspect completed work to verify adherence to engineering requirements and quality standards. Utilize experience in building systems and mech

Bachelor’s or Master’s degree in architecture, engineering, building science, or a related field. Ettinger Engineering Associates (EEA). MEP/FP and civil engineering design, is seeking a mid- to senior-level Passive House Specialist to lead and deliver high-performance building projects across o

Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate with Legal, Global Procurement, Workplace Strategy & Planning, Engineering, IT/AV, Security, EH&S, Facilities Opera

The main function of a non-IT project manager is to plan, direct, or coordinate activities in such fields as engineering, research and development, financial systems and product roll-out, etc or any other non-IT based project. Cross-functional Collaboration: Work closely with marketing, product, eng

Supported by Global Procurement, Workplace Strategy & Planning (finishes/logistics), Security, IT, and Engineering. Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate

Audio, lighting and video elements and installation timelines. Other production and site management a plus including AV installations, lighting, rigging, HVAC, Video, film/TV production, etc.

The Associate Project Manager shall effectively complete all assigned project assignments, take direction from supervisor(s) on soft projects and department initiatives associated with the engineering, design, and construction department goals. Performs project management for engineering, design, co

Coordinate with architects, engineers, subcontractors, and vendors.

Architecture or engineering education or experience.

Our client is a respected leader in corporate interior fit-out projects, known for delivering high-quality, tailored workspace solutions.With a strong reputation for creativity, precision, and a client-first mindset, they oversee projects from initial concept through to final completion—creating f

Dante NYC is set to unveil its most ambitious project yet this summer in New York—a storied space featuring three distinct bars, a wood-fire kitchen, and an intimate private record bar.Dante NYC is a celebrated cocktail bar and restaurant with a rich history, originally established as Caffe Dante

Full-Time | In-Office | Greenwich, CT.An international hospitality group is seeking a creative, highly organized, and detail-oriented Project Manager/Design Assistant/Coordinator.This role is based in our Greenwich, CT office and includes potential international travel.The ideal candidate has stron

Supported by Global Procurement, Workplace Strategy & Planning (finishes/logistics), Security, IT, and Engineering. Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Cross-collaborate

Experience building relationships with clients, engineers, subcontractors, and internal stakeholders. Bachelor’s degree in Construction Management, Civil Engineering, or related field preferred. Serve as the primary point of contact for clients, owners, engineers, subcontractors, and project partn