Machine maintenance jobs in Irvington, New JerseyCreate job alerts

Job Description Press Brake Operator Kearny, NJ 3rd Shift $25 to $30 an hour+overtime+benefits Press Brake Operator--Experience with AMADA or TRUMPF preferred Call 843-619-2299 or email for detail Responsibilities: • The machine operator is responsible for all functions related to the daily production output. This position will require the use of computers, CAD programs, basic hand tools, and measurement instruments., • Program, setup and operate a Press Brake Machine preferably AMADA or TRUMPF, • Experience in sheet metal fabrication, • Understanding of limitations and capabilities of punch press machines regarding tooling capabilities, such as clearance dies, countersinks, taps, etc., • Experience in NC coding with capability to edit to job requirements, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and meets quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality, • 2 years minimum experience in programming and setup?, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal and punch assembly tooling, • Ability to use basic measurement instruments to verify components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue, • Ability to work in a non-climate-controlled production environment

Job Description Laser / Punch Operator Kearny, NJ 3rd Shift 11pm-7am Mon-Fri $25 to $28 an hour+overtime+benefits Direct Hire, Permanent placement role Laser / Punch Operator--Experience with AMADA or TRUMPF preferred Call 843-619-2299 or email for detail Responsibilities: • The machine operator is responsible for all functions related to the daily production output. This position will require the use of computers, CAD programs, basic hand tools, and measurement instruments., • Program, setup and operate a Laser / Punch Machine preferably AMADA or TRUMPF, • Experience in sheet metal fabrication, • Understanding of limitations and capabilities of punch press machines regarding tooling capabilities, such as clearance dies, countersinks, taps, etc., • Experience in NC coding with capability to edit to job requirements, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and meets quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality, • 2 years minimum experience in programming and setup?, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal and punch assembly tooling, • Ability to use basic measurement instruments to verify components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue, • Ability to work in a non-climate-controlled production environment

Job Description Raycap, Inc., an industry leader in manufacturing solutions for telecommunications, renewable energy, transportation, defense, and other applications, is currently looking for second shift Press Brake/Machine Operators in our Kearny, NJ facility. This is a fast-paced position in a sheet metal manufacturing environment. Job Summary: The Press Brake operator is responsible for all functions related to daily production output. This position requires the use of computers, CAD programs, basic hand tools, and measurement instruments. Third shift: Monday-Friday, 11:00 p.m. through 7:00 a.m. Primary Job Responsibilities: • Program, set up and operate a CNC Press Brake, preferably Amada, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Experience in sheet metal fabrication, • 2 years of minimum experience in programming and setup, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of press brake tooling, • Ability to use basic measurement instruments to verify that components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue UNION: IBEW Local Union 3 BENEFITS: Please reference the IBEW Local 3 Union Contract for details on all benefits. • Medical/Dental/Vision/HRA/Annuity - 6 months from date of hire, • Vacation Time - will begin effective June 30th, after 6 months of continuous employment, • Sick Time - will begin accruing from day one, • Mandatory Union Dues - $7/week, $28/month, • Mandatory One-Time $182 Union Application Fee, • 12 Paid Holidays Raycap is an Equal Opportunity / Affirmative Action Employer. All qualified applicants receive consideration for employment without regard to age, disability, race, color, national origin, sex, marital status, sexual orientation, religion, creed, veteran or military status, or other protected status. We participate in E-verify for all employment verifications. Drug-free workplace.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Process Operator I will be responsible for the control of the tank farm area by handling rail car and tank wagon deliveries and shipments. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory, and Stratas Foods procedures and policies. Essential Duties & Responsibilities · Ensure all safety and GMP policies and procedures are followed while performing daily duties. · Record operating data for the department such as products and quantities pumped off from gauge readings, operating times, lot numbers, seal numbers etc., and completing required documentation as needed. · Unload bulk product and raw ingredients from railcar and tank wagon in a safe and timely manner to meet production demands. · Steams railcars as necessary · Ensures railcars and tank wagons are positioned and secured properly. · Manufacture batches for use on production lines. · Read and interpret formulas to determine product specifications, processing information, and technical information. · Responsible for recording production and test data for each food product batch, including ingredients, lot numbers, temperatures, and test results. · Monitoring and regulating gauges, recording instruments, flow meters, and thermometers to correctly adjust the addition of raw materials, mixing speeds, etc. to maintain the quality of the product and ensure safe and efficient operations. · Monitor product movement to and from the storage tanks, coordinate activities with other workers to ensure constant product flow. Replenish storage tanks regularly to meet the production schedule and avoid downtime. · Support the production operation by opening and closing product supply valves to the production filling systems upon request from the machine operators. · Patrolling the work area to detect any leaks, equipment malfunctions, and operating conditions and reporting any deficiencies to the Material Flow Manager and the Maintenance Supervisor. · Taking samples of products to provide to the Quality Assurance Laboratory for testing. · Using testing equipment to test samples of products to ensure they are in compliance with specifications and document results in required logbooks and/or batch records, reporting any deviations in results to the Quality Assurance Manager. · Responsible for having knowledge of transfer valves, pumps, etc. which transfer bulk products from manufacturing to run tanks. · Cleaning and sanitizing all equipment necessary for the manufacturing of food products. · General housekeeping in working area to comply with GMP’s and safety concerns. Starting Pay: $25.02 Qualifications · High school Diploma · Experience operating in a fast paced, ready-to-eat food facility a plus · Ability to be self-guided and motivated to operate independently · Ability to manage through urgent situations · Strong multi-tasking skills · Ability to work well under pressure · 5+ years of experience in a similar role and industry To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the minimum knowledge, skill, and/or ability required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. · While performing the duties of this job, the employee is regularly required to stand; walk; use hands to fingers; reach; stretch; bend; kneel; crouch; climb; balance; etc. · The employee must regularly lift and/or move up to 50 pounds. · Specific vision abilities required include close vision, color vision and peripheral vision. Must be able to work outside in environmental conditions, which at times include extreme heat or extreme cold. Activities include extended periods of walking and standing, using hands and fingers. Capable of lifting 75 lbs. Must be able to reach, stretch, bend, kneel, and crouch. Specific vision abilities required include close vision, color vision, and peripheral vision. Additional Information Working Conditions Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description Summary The Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. The Machine Operator must be able to operate and oversee specialized automated packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated packaging equipment, therefore an understanding of mechanical and electrical systems is required. The Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. The Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday. Job Duties • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day., • Responsible for determining the work flow sequence to minimize changeovers., • Stages product work flow so it is ready for processing after pre-shift briefing to techs., • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns., • Direct assembly or disassembly, and cleaning as required for shift start and end operations., • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities., • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc., • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product., • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste., • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention., • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible., • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance., • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO., • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards Skills & Attributes • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences, • Strong organizational, critical thinking, presentation, and project management skills, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner, • Exceptional interpersonal and relationship building skills, • Advanced math and reading comprehension, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce, • Understands and thrives in fast-paced, KPI-driven production environments, • Team player willing to assist in any function of packaging and labeling, • Ability to prioritize the business in all decision making Education & Experience • HS Diploma or 2+ years of related field experience, • 1+ years of experience in a leadership role, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition, • Experience working with various machines or electrical systems, • Proven track record of managing the scope of operations in a complex and highly regulated business environment, • Cannabis product knowledge strongly preferred, • Working knowledge of Metrc Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Able to work a fully flexible schedule including nights and weekends if necessary, • Must pass all required background checks, • Must have a reliable vehicle, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must possess valid driver's license, • Must be a minimum of 21 years of age, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry #ENGHP

Job DescriptionBenefits: • Dental insurance, • Health insurance Location: Linden, New Jersey Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • Perform Other Duties as AssignedQualifications, • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job Description Staff Management Group is seeking a Packaging Mechanic for our client in East Hanover, NJ. Please read the ENTIRE job description and ALL of the job requirements BEFORE applying for this position. Schedule: • 3rd Shift: 11PM - 7:15AM Pay Rate: • $30 - $35 / hour Job Summary: We are seeking a highly skilled and proactive Packaging Machinery Mechanic to support our 3rd shift operations, who can expertly set up, operate, troubleshoot, and maintain all packaging equipment. Job Responsibilities: • Lead setup and changeover for packaging lines—blister machines, bottle fillers, cartoners, inkjet and UV printers, vision systems—ensuring proper tooling, alignment, and format accuracy., • Set and verify all process parameters (speed, temperature, fill levels, print registration) in accordance with documented SOPs and regulatory standards, • Diagnose and resolve mechanical, electrical, pneumatic, and automation-related issues quickly to maintain uptime., • Perform preventive maintenance tasks—lubrication, inspections, parts replacement—to reduce breakdowns and extend equipment life., • Collaborate closely with Quality Assurance to investigate packaging defects, regulatory deviations, or customer complaints, providing corrective actions and improving process controls., • Ensure strict adherence to cGMP, DEA, OSHA, and internal safety guidelines; lead safety reviews, lockout/tagout (LOTO), line clearance, and approval protocols., • Maintain detailed machine logs, maintenance records, and batch documentation in CMMS/SAP for compliance and auditing purposes., • Analyze production inefficiencies and waste, recommending and implementing process improvements and potential equipment upgrades or expansions., • Leverage solid working knowledge of PLCs and automation controls, and familiarity with continuous and thermal inkjet, UV printers, vision systems, and automotive-grade packaging machinery., • Actively recommend new technologies, retrofit opportunities, and automation strategies to support future-scale operations. Job Requirements: • Education/Experience: High school diploma or technical degree. Minimum 5 years' experience in packaging machinery maintenance and operation., • Proficient in mechanical, electrical, hydraulic, and pneumatic systems., • Skilled in PLC programming and troubleshooting., • Experienced with various packaging equipment—fillers, labelers, cartoners, blister systems, inkjet/UV printers, vision systems., • Soft Skills: Strong leadership, communication, training, and teamwork capabilities. Demonstrated ability to prioritize, solve complex issues, and drive continuous improvement., • Compliance: Deep understanding of cGMP, DEA, OSHA, and other relevant regulatory frameworks., • This role reports directly to the Director of Operations, takes hands-on responsibility for packaging machinery integrity, and works closely with QA, Production, and Engineering. Additional Information Staff Management Group is an equal employment opportunity employer, and all qualified applicants will receive consideration for employment without unlawful discrimination based on race, color, creed, national origin, sex, age, disability, marital status, sexual orientation, or citizenship status. About Staff Management Group: Staff Management Group has over 30 years of experience placing staffing candidates in distribution, manufacturing, production, assembly, and clerical positions. Staff Management Group is one of New Jersey’s leading staffing and recruiting agencies specializing in light industrial and clerical staffing. Come join the team! #IND1

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Elizabeth, NJ area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, laptop, cell phone, PAID TRAINING provided. Starting Pay Range: $20-$27. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Travel can be up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off Find out more: Powered by JazzHR ghOF4vx4rs

Job Description The Service Technician is accountable for troubleshooting malfunctioning or disabled automated, anti-vehicular barrier and bollard equipment to determine root cause of malfunction or failure and taken appropriate action to return the equipment to operational condition. The Service Technician is accountable for performing preventative maintenance procedures on same equipment as detailed by the original equipment manufacturer. The Service Technician is accountable for providing oversight of equipment installations and commissioning same equipment for proper initial customer utilization Essential Accountabilities: • Troubleshoot to root cause and repair customer’s barrier, gate and bollard equipment to ensure product performs as intended on a reliable basis utilizing only approved replacement parts, • Perform detailed and comprehensive preventative maintenance procedures on customer’s barrier, gate and bollard equipment as recommended by original equipment manufacturers, • Complete all preventative maintenance checklists, service tickets and time sheets completely and accurately; forward to office, administrative staff within 24 hours of performance of work, • Provide detailed estimates of required repairs when requested by customer representative to facilitate expense approval process, • Provide comprehensive and detailed assessment to Service Manager and Sales Manager of equipment that has reached end of life and should be replaced; provide similar feedback to customer representatives and notate on service tickets, • Oversight of an equipment installation ensuring all requirements of drawings and specifications have been met and/or satisfied, • Receive and Respond to Requests Equipment Maintenance and Repair, • Arrive at Service Office every day in preparation for day’s assignment unless directed otherwise, • Turn-in previous days paperwork including service tickets, timesheets and parts request forms and replace components, • Engage Service Manager, Service Coordinator or Lead Technician for review of day’s service call-outs and scheduled PMs, • Advise leadership of any gaps in capabilities due to parts or equipment required for specific call-outs or PMs, • Ensure assignments include point-of-contact, POC, for given facility, • Load up service vehicle with any required parts or resources not already on hand in service vehicle, • Proceed to customer site, • On call requirement for emergency repairs (rotation schedule is set up between the technicians for emergency repairs that are requested on weekdays after regular schedule hours and/or during weekends), • Initiate Customer Engagement, • Upon arrival on site ensure adequate, legal parking is provided or advise customer and office of inadequate parking, • Make initial contact with provided POC or their agent, • Confirm nature of service call, equipment detailed in call-out and working restrictions/times with POC, • Proceed to equipment site(s), • Execute Service or Repair Procedures, • Assess equipment behavior for repair needs or prepare fresh copy of PM checklist, • Effect repairs or perform preventative maintenance procedures, • Fill out PM checklists as procedures are executed, • Review all basic equipment functions to ensure equipment is returned to customer control in proper working order, • Make list of additional needs if required parts or tools/resources are not available and second call is required, • Complete Paperwork and re-engage POC, • Complete service ticket and/or ensure PM checklists are properly completed, • Review executed activities via paperwork with POC, • Gain POC signature on Service Ticket and legible printout of POC name, • Leave copy with POC or advise POC when copy will be forwarded, • Provide Oversight and Commissioning at a New Equipment Installation, • Ensure third party partners, suppliers or contractors have installed equipment per drawings and specifications., • Identify and communicate in installation details that are not per same drawings and specifications to third parties and leadership staff, • Commission new equipment installation via verification of all system functionality and designed and specified via site specific sequencing and execution parameters, • Report any details of functionality that does not conform to site specific requirements to Engineering and Leadership personnel, • Validate corrective action rectifies shortfall previously communicated Key Performance Parameters and Metrics: • Execute service calls in timely manner in line with existing labor standards, • Turn in all paperwork within 24 hours of performance of work without exception, • Advise Service Leadership of possible improvements to products, processes or work procedures, • Provide feedback to Service and Sales Leadership of possible equipment replacements, • Installation oversight effectively guarantees conformance to all drawings and specifications, • Equipment commissioning demonstrates comprehensive equipment conformance to intended sequencing, • Required Knowledge, Skills, and Abilities:, • Must be able to troubleshoot and repair hydraulic and electromechanical equipment including electric and electronic controls, • Must have baseline understand of electrical principals such as Ohm’s Law and how motors function, • Must have baseline understanding hydraulic principals such as force multiplication, pressure, volume and cavitation, as well as, how pumps, valves and accumulators function, • Must understand basic operating principals of programmable logic controllers and variable frequency drives; must be able to revise functional parameters of variable frequency drives, • Must have basic understanding of how vehicle detection loops function and how to troubleshoot loop/loop detector failures, • Must have good verbal skills and be able to interface directly with customers to explain basic equipment function, repair and maintenance procedures and a sequence of operation, • Must have good written communication skills to complete necessary paperwork for business execution including timesheets, service tickets and parts request forms; handwriting must be legible, • Must be able to utilize basic computer and tablet software for equipment interfacing and paperwork in lieu of hand written pieces, • Must be able to lift 50 lbs. or more repeatedly, • High School Diploma, • Minimum 3-5 years field service experience in electrical, hydraulic or mechanical machine repair, • Computer training preferred, • Electrical training/PLC/VFD training preferred, • Previous experience reading and interpreting civil and electrical drawings to confirm proper conformance Traits/Competencies required • Good Communication Skills, • Self-motivated and able to manage time, • Attention to detail, • Troubleshooting skills/fault isolation and identification, • Moderate Electrical Aptitude, • Moderate Mechanical Aptitude, • Moderate Hydraulic Aptitude, • Basic Civil Engineering Aptitude, • Competency reading basic civil and electrical drawings and validating conformance Job Location Kearny, NJ

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. • Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs., • Demonstrating a willingness to help others and be a team member, • Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services., • Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company., • Provide voice of Customer feedback., • Through service and Customer relationships, build brand dedication., • Conduct travel and work in a safe manner, constantly learning new technology and soft skills., • Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues., • Proficient verbal and written communication and Customer relation skills., • Able to interact and effectively communicate in person and over the phone with customer and co-workers., • Present a professional image., • Must be adaptable to changes and able to deal with change, delays, or general work-related issues., • Basic digital literacy and shown understanding of MS Word, Excel, and Outlook., • Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.)., • Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus., • Basic mechanical and logical solving skills are a must. What’s in it for You: • We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work:Competitive starting salary, • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance, • 3+ Weeks’ Vacation to Start, • 10 Company Paid Holidays, • 401(k) retirement plan with company contributionTuition reimbursement, • Employee appreciation events and perksEmployee Assistance Program Mental and Physical Requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Requisition #: 1440B, Newark NJ

The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Job Title: Mach

Job DescriptionJob Title: Assistant Dental Office Manager Department/Location: Operations Reports to: Regional Vice President FLSA Status: Exempt Company Overview ProSmile is one of the fastest-growing dental organizations, with a vast network of multi-specialty practices across New Jersey, Pennsylvania, Virginia, Michigan, Illinois, Wisconsin, Indiana, Washington D.C., and Maryland. Our practices are led by top-tier dentists who are committed to providing exceptional patient care while offering a supportive environment for dental professionals to thrive. We focus on delivering personalized, gentle care to our patients and creating a collaborative workplace with opportunities for mentorship, growth, and ongoing training. Position Summary ProSmile is in need of an Assistant Dental Office Manager who is looking to join a practice with a strong culture, compassionate and skilled dentists, and a support structure that creates an environment of learning and the autonomy to create change at the practice that brings about growth and success. We offer competitive pay based on experience with a great benefit package. As an Assistant Dental Office Manager, we give you the tools and support needed to ensure you are in the best position to be successful. A ProSmile Assistant Dental Office Manager is a unique opportunity to join a practice that is part of a larger growing organization and offers the ability to move up and take on higher positions within the company. Duties and Responsibilities: • Maintains control of patient scheduling, • Addresses and resolves patient complaints, • Reviews patient charts making corrections with posting if needed, • Takes on the responsibility of the Treatment Plan Coordinator in some offices, • Has working knowledge of all insurances; handling of claims, attachments for claims, • Maintains collection controls and systems, • Oversees daily closeout functions as well as daily deposit with the corporate office, • Coordinates end-of-month functions with the corporate office & Dental Practice Manager, • Monitors patient A/R, • Ensures compliance with all company Policies and Procedures in office and communicates any changes in same to staff, schedules office staff meetings, • Coordinates staffing needs, scheduling, recruiting, interviewing, hiring, performance reviews and terminations in consultation with HR Department and Dental Practice Manager, • Contacts maintenance for all office equipment in need of repair for optimum function, • Following up on unresolved task, • Performs miscellaneous job-related duties as assigned, • Coordinating office needs with Dental Practice Manager, • Assistant Dental Office Manager - Qualifications, • High School diploma or GED required, • Experience using Outlook, Word Excel preferred, • Easily able to learn new technologies and systems required, • Work experience in an administrative function and/or customer facing role required, • Working knowledge of dental or medical front desk duties and responsibilities preferable, • Previous dental office management work experience preferable, • Requires some flexibility in scheduling, such as the ability to work evenings and weekends as needed Benefits Summary At ProSmile, we are committed to supporting the health and well-being of our employees and their families. We offer the following benefits for Full Time Benefits Eligible Positions (35+ hours per week) and Part Time Benefits Eligible Positions (30-35 hours per week): • Medical Insurance: Choice of five comprehensive Aetna medical plans, including options with low copays, deductible-sharing, and national provider networks., • Dental Insurance: MetLife plans offering preventative, basic, major, and orthodontic coverage options., • Vision Insurance: Davis and UHC vision plans with annual exams, eyewear allowances, and contact lens benefits., • Flexible Spending & Health Savings Accounts: Pre-tax savings accounts for medical, dependent care, and healthcare expenses., • Life & Disability Insurance: Employer-paid basic life and AD&D insurance, with voluntary life, short-term, and long-term disability plans., • Additional Perks:, • Employee Assistance Program (EAP), • Identity Theft & Fraud Protection, • Legal Support Services, • Discount Programs (including pet insurance, travel, theme parks, electronics, etc.), • Wellness Programs The Company reserves the right to modify the job description based upon its needs and may require the employee to perform functions beyond those mentioned above. Neither this job description nor any other communication creates an employment contract between the Company and the employee. Equal Employment Our culture encourages individual development, embraces an inclusive environment, rewards innovative excellence, and leads in provider and patient satisfaction. Prosmile values diversity, inclusion, and equity as matters of fairness and effectiveness. We are committed to hiring and retaining a staff that reflects the diversity of the communities we serve, fostering an inclusive working environment where staff of all backgrounds feel welcomed and engaged. ProSmile is an Equal Opportunity Employer and encourages applications from individuals underrepresented in the medical sector, including people of color, and persons with non-traditional work and educational experience. All who believe they meet the stated qualifications are invited to apply. Company Safety We believe that the best care for our patients starts with the best care for our employees. ProSmile is committed to proactively creating and maintaining an environment that is safe for our team and patients. Employees are required to wear Personal Protective Equipment (PPE) including face masks, gloves, gowns, and more as needed and in accordance with CDC standards. Powered by JazzHR kSiLdFzpOB

Job Description At Autoland Toyota Chrysler Jeep Dodge Ram, we are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. If you have an interest in automotive and a desire to develop a career in the industry, apply today! Are you experienced with basic level automotive maintenance and frustrated or bored with your current workplace? Do you want to enjoy a productive, safe, and professional environment where you can grow your career and feel good about where you work? We're looking for Oil Change/Entry Level Automotive Technicians to join our team. If this sounds like you, then come and see what we have to offer! What We Offer • Medical, Dental & Vision Insurance, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Paid Training, • Employee vehicle purchase plans, • Family owned and operated, • Health and wellness, • Discounts on products and services, • Air-conditioned shop, • State-of-the-art facility and cutting edge technology, • Shop equipped with the newest technology and equipment, • Uniforms provided, • Work environment OSHA certified to current Air Quality Standards, • Highly productive shop, • Career advancement opportunities, promote from within, • Continued education, manufacturer hands on and web based training, • Clean and professional work environment, • Test to check whether systems and components are secure and working properly, • Isolate the systems or components that might have caused the problem, • Drive the vehicle for testing purposes, • Maintain efficiency and accuracy in diagnosing as well as repairing vehicles, • Repair or replace worn parts ahead of the vehicle’s breakdown or damage, • Knowledge of automobiles, • Comfortable operating electronic diagnostic equipment, • High school diploma or GED; Technical degree preferred, • Minimum of 1 year in service department, • Ability to lift 50 pounds and work on your feet for extended periods of time, • Positive, friendly attitude We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job Description Summary: A Medical Laboratory Technician is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease under direct supervision of a qualified supervisor. Responsible for operation of the laboratory. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily under direct supervision of a qualified supervisor. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. VARIOUS SHIFTS AVAILABLE. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Associate’s Degree or higher preferred · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job Description Job Title: Production Supervisor Location: Pitman, NJ Hours of Operation: Monday – Friday 7:00AM – 3:30PM Job Summary: Production Supervisor who will monitor our production operations and ensure that they deliver maximum quality in a profitable manner. Your duties will include supervising/managing, monitoring employees٫ organizing workflows and analyzing the efficiency of the manufacturing processes. Duties/Responsibilities: • Establish daily٫ weekly and monthly objectives and communicate them to employees, • Manage the workflow by assigning responsibilities and preparing schedules, • Guide and coach employees٫ monitoring their productivity, • Oversee safe use of equipment and schedule regular maintenance, • Perform verification of production output according to specifications, • Detect issues in efficiency and suggest improvements, • Ensure strict adherence to safety guidelines and company standard, • Flexible to work long hours as required to meet project deadlines, • Able to sit, walk, move around for long hours at a time Education and Experience: • 2+ years' experience of working as a Production Supervisor or other similar position in manufacturing, • Excellent verbal and written communication skills, • Strong analytical and problem-solving skills, • Broad knowledge of production planning processes, • Understanding of machine controls and instrumentation, • Able to deal with complex issues in a fast-paced setting, • Profound experience in using various types of manufacturing machinery and tools, • Good practical experience with MS Office, • Self-motivated and an efficient problem solver, • High School Diploma; additional degree in engineering or other relevant area will be a bonus Physical Requirements: Ability to stand for prolong time, walk and use hands to hold or operate objects, tools or controls. Able to reach with hands and arms, kneel, bend, crouch, climb ladders/stairs and twist body. Must be able to regularly lift and/or move up to 25 lbs. and occasionally lift and/or move up to 50 lbs. This is a warehouse environment where frequently this position will be exposed to cold, hot and changing temperatures will constantly experience noise at medium level not damaging or loud enough to require protective equipment; will frequently be exposed to dust, dirt and changes in lighting

Job Description Sourgum is transforming the $100B+ waste and recycling industry through cutting-edge technology that makes waste removal simpler, smarter, and more cost-effective. Our innovative haulsourcing platform powers high-quality waste and recycling services for businesses at significantly lower costs—saving our customers an average of 20%. Leveraging proprietary datasets, an advanced operating system, and a carefully curated network of 5,000+ trusted vendors, we help companies of all shapes and sizes streamline their operations while advancing sustainability efforts. We’re a fast-growing, venture-backed company (just closed our Series A!) on a mission to modernize an outdated industry — and we’re just getting started. Our investors include Spark Capital, Founder Collective, Suffolk Technologies, 186 Ventures, and River Park Ventures, the same funds that backed category-defining companies like Slack, Anthropic, Uber, Venmo, and Amazon Pharmacy. If you’re driven by the opportunity to build something groundbreaking, we’d love to meet you. As an experienced engineer, you will help build our core SaaS platform by working with a small but rapidly growing team to develop, maintain, and deliver this innovative platform. Guided by the roadmap, you will ensure on-time, on-budget software delivery and help grow and mentor our team. Your experience will include recent experience architecting solutions using Typescript/Node or Go microservices. Key Responsibilities * The delivery of architecture, design, and implementation of cloud SaaS solutions based on business requirements * Development and maintenance of the software platform. Align the results with the requirements of the appropriate stakeholders * As a Senior Software Engineer, you will play a crucial role in our team, working closely with the head of engineering and product managers, business unit leaders, and stakeholders. Your responsibilities will include managing engineering, determining team resourcing, and demonstrating your leadership skills and ability to work collaboratively. * As a Senior Software Engineer, you will be a key stakeholder in our product engineering. Your contribution will be instrumental in the success of our software solutions, as you will translate business requirements into technical specifications for our engineering team to design and implement. Requirements Technical Skills * 9+ years of hands-on in professional software development * 9+ years of experience working with relational databases (MySQL, PostgreSQL, Aurora, etc.) * Strong understanding of data structures, indexing, and searching required * Ability to integrate with Elasticsearch and run queries/reports * 3+ years of experience building microservices * 3+ years’ experience working with AWS-based services including S3, SQS, SNS, DynamoDB, Lambda, Redshift * Experience with Kafka and other technologies * Can apply principles of Test-Driven Development * Experience with writing test cases * Able to write build scripts * Experience with Kubernetes and Terraform * Experience with version control systems, CI/CD pipeline tools, workflow tools, Jenkins, etc. * Experience integrating applications with Redis/Memcached a plus Nice to Have Skills * Experience with Flutter * Development of mobile and tablet devices * AI/Machine Learning experience a plus * Experience with Big Query and Metabase * Experience developing Vertical SaaS ERP Software Personal Skills * A passion for building software and streamlining process issues * Demonstrate tenacity when solving challenging problems in a deadline-driven environment * Experience with Scrum/Agile Methodologies * Ability to lead a team, as well as a roll-up-the-sleeves mentality to work well as part of a team * Able to be self-motivated and work independently as needed to solve complex problems * Taking pride in work and desire to make projects succeed Benefits * Company stock options as part of your compensation package, giving you the opportunity to share in our company's success and build long-term financial growth. * A positive and collaborative work environment with a focus on innovation and sustainability. * Comprehensive benefits package including health insurance (medical, dental, vision, LTD, Life Insurance, etc.), retirement plans (401K), and paid time off. * Access to hundreds of gyms, studios, and wellness apps—all through one easy membership provided by your Wellhub. * yearly Personal Development Budget * Opportunities for professional development and career advancement within a growing company. Compensation Range: $170K - $210K

Job Description We are seeking a skilled and experienced CNC Machinist to join our dynamic team. As a CNC Machinist, you will be responsible for setting up and operating computer numerical control (CNC) machines to produce high-quality precision parts. The ideal candidate should have a strong background in machining, be detail-oriented, and possess excellent problem-solving skills. This is a full-time position with opportunities for growth and advancement within our company. Responsibilities: • Set up and operate CNC machines to perform precision machining operations such as milling, turning, drilling, and grinding., • Study blueprints, sketches, drawings, manuals, or specifications to determine dimensions and tolerances of finished workpieces, sequence of operations, and setup requirements., • Select and install cutting tools, attachments, and accessories according to job requirements., • Load and unload workpieces and fixtures into the machine, ensuring proper alignment and secure clamping., • Monitor machine operations and make necessary adjustments to maintain quality and efficiency., • Inspect finished workpieces using precision measuring instruments to ensure conformance to specifications., • Troubleshoot and resolve issues that may arise during machining processes., • Perform routine maintenance on machines to ensure proper functioning and minimize downtime., • Collaborate with team members and engineers to optimize machining processes and improve overall productivity., • Adhere to safety guidelines and maintain a clean and organized work area.

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC. • Read measuring tape, gauges, and calipers • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job DescriptionSalary: $45/hr Join Our Team at ImageCare Radiology! At ImageCare Radiology, we offer a wide range of diagnostic imaging services across 20+ locations in Northern and Central New Jersey. Our outpatient centers provide affordable, high-quality care in a patient-focused environment. Join our growing team and help us deliver exceptional medical imaging while advancing your career in a supportive, dynamic setting. Be part of a team that values your skills and contributions! ImageCare Radiologyis seeking a Full-Time MRI Technologist neededat our West Orange office location. SCHEDULE Monday - Friday, 7am-3pm with weekend availability as needed. Applicants must havecurrentNJ State License, ARRT or ARMIT and BLS certification. GENERAL DESCRIPTION OF POSITION Performs MRI procedures for referring physicians of quality that aids in the diagnosis of the patient. ESSENTIAL DUTIES AND RESPONSIBILITIES • Perform MRI examinations on patients of all ages, including the administration of contrast material as assigned in accordance with established guidelines in a manner that ensures an accurate and complete examination and treatment providing the highest patient care. • Organize and document all aspects of assigned patient care in coordination with the referring physician and the radiologist to ensure accurate and timely performance of procedures., • Knowledge of scheduling procedures for MRI., • Maintenance and organization of patient film file records., • Maintain continuing education units as required to ensure ARRT certification., • Maintain a clean and stocked work area., • Perform any other related duties as required or assigned. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty mentioned satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. EDUCATION AND EXPERIENCE High school diploma, plus specialized schooling and/or on the job education in a specific skill area; plus 1+ years of related experience and/or training. Or equivalent combination of education and experience. MEDICAL SPECIALTIES Radiology ABILITY TO COMMUTE/RELOCATE West Orange, NJ 07052: Reliably commute or planning to relocate before starting work (Required) EDUCATION High school or equivalent (Preferred) Completed specialized schooling in Radiology EXPERIENCE Siemens Machine: 1 year (Preferred) LICENSE/CERTIFICATIONBLS Certification (Required) ARRT or ARMIT Certification (Required) NJ State License (Required) Flu Vaccination & Proof of MMR Requirement: It is ImageCare's Company Policy that all personnel must be vaccinated with the MMR and the yearly flu shot. ImageCare Centers provided the following inclusive hiring information: We are an equal opportunity employer and considers all qualified applicants equally without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job Description We are looking for a Welder - Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented

Job Description Laser / Punch Combo Operator Kearny, NJ 2nd Shift 330pm-Midnight ,Mon-Fri $25 to $28 an hour+overtime+benefits Laser / Punch Operator--Experience with AMADA or TRUMPF preferred Call 843-619-2299 or email for detail Responsibilities: • The machine operator is responsible for all functions related to the daily production output. This position will require the use of computers, CAD programs, basic hand tools, and measurement instruments., • Program, setup and operate a Laser / Punch Machine preferably AMADA or TRUMPF, • Experience in sheet metal fabrication, • Understanding of limitations and capabilities of punch press machines regarding tooling capabilities, such as clearance dies, countersinks, taps, etc., • Experience in NC coding with capability to edit to job requirements, • Communicate with production leads on meeting demands and following schedules, • Inspect production parts for defects and meets quality standards, • Perform routine maintenance on machinery, • Maintain work area and ensure a clean, safe work environment, • Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality, • 2 years minimum experience in programming and setup?, • Ability to read and interpret 2D prints, 3D models, and work instructions, • Knowledge of sheet metal and punch assembly tooling, • Ability to use basic measurement instruments to verify components meet requirements, • Ability to communicate verbally, • Excellent time management skills, • Ability to Lift up to 50 lbs, Stand and Bend frequently without issue, • Ability to work in a non-climate-controlled production environment

Job DescriptionPay Range: 60k to 70k with Quarterly Bonus THE COMPANY In business since 1969, Interport modifies and sells new and used shipping containers, serving customers throughout the Northeastern U.S. Established in 2004, Interport Secure Parking operates 24/7/365 secure facilities in Newark, NJ and Savannah, GA where local and regional intermodal drayage truckers park and store loaded and empty import and export containers being transported for global cargo owners, ocean carriers, and third-party logistics providers. Interport proudly employs and empowers a diverse team of exceptional individuals committed to providing our customers superior products, services, and solutions. THE POSITION The Operations Supervisor for Container Sales & Modifications is responsible for overseeing the daily operations of the Modification Shop, supervising staff, and ensuring quality control in all modification projects. This role involves coordinating production schedules, maintaining a safe and efficient work environment, and supporting various operational needs as directed by the Senior Director of Production. MAJOR DUTIES AND RESPONSIBILITIES • Supervise and manage shop & yard personnel, include welders, framers, painters, shop assistants, and machine operators, ensuring efficient scheduling and timekeeping., • Oversee and participate in modification work, including spray paint booth operations and facility maintenance., • Ensure quality control for all modification projects, maintaining compliance with safety and operational standards., • Operate and oversee the safe use of lift equipment in the shop and spray paint booth., • Procure, track, and manage tools, materials, and supplies required for modification work., • Liaise with Operations staff responsible for equipment control and customer service, • Assist in identifying labor, material, and time requirements by studying proposals, blueprints, specifications, and related documents, • Address and resolve discrepancies by collecting and analyzing information, • Collaborate internally on Modification Shop-related matters; and coordinate with Sales Yard staff responsible for equipment control and customer service., • Investigate and resolve customer complaints in coordination with the Senior Director of Production, • Participate in Interport safety programs and ensure adherence to workplace policies and procedures, • Assist with special projects and take on additional responsibilities as needed. MINIMUM REQUIREMENTS, • High school diploma or general education degree (GED), • Minimum five (5) years of experience in container modification, metalworking, or related field, • Minimum of two (2) years of supervisory experience in production or manufacturing environment, • Hands-on experience with steel fabrication, including cutting, welding, burning, and plasma cutting, • Construction skills including carpentry and basic wiring, • Ability to read and interpret technical drawings, • Ability to lift up to 50 pounds and sit, stand, or walk for extended periods at a time, • Ability to work in Interport’s Spray Paint Booth, including wearing and working with a respirator, • Willingness to work both indoors and outdoors in different weather conditions, • Proficiency in English, with strong verbal and written communication skills, • Ability to commute to Newark, NJ, with a valid driver's license in good standing, • Strong analytical skills and attention to detail, with proficiency in Microsoft Office, an ability to use ERP system (NetSuite), a good understanding of data analysis methods, and attention to detailPREFERRED/PLUS, • Experience with Microsoft Office applications, • Familiarity with ISO container maintenance and repair standards, • Bilingual in English/Spanish is a plus, • Lean Six Sigma certification or experience PERSONAL ATTRIBUTES THAT HELP MAKE AN INDIVIDUAL SUCCESSFUL IN THIS ROLE, • Lead by example, • Strong work ethic, • Positive and team-oriented attitude, • Commitment to quality and safety, • Effective time management and flexibility, • Manufacturing environment, • Variable weather conditions, • Noise, • Working at heights, • Dust and dirtPHYSICAL DEMANDS, • Standing, sitting or walking for long periods, • Climbing ladders, • Carrying heavy materials and making repetitive motions while painting. OTHER DUTIES Please note that this job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. WE OFFER • A base hourly wage commensurate with your qualifications, paid weekly, • Participation in our 401(k) retirement savings plan, • Performance-based variable compensation and a discretionary bonus program, • Comprehensive health benefits, • Paid Time Off (vacation/sick time) and holiday pay, • Participation in the company CDL training program Powered by JazzHR rV8Lu4yCXu

Job Description X-Ray Technician Montclair, NJ, USA• 37 N Fullerton Ave, Montclair, NJ 07042, USA Job Description Job Summary: X-ray technician to be responsible for providing clear images to Physicians through bone density scanning. The X-ray technician's responsibilities include following Physicians' instructions, explaining the procedure to patients, selecting software options and imaging parameters on the Bone Density machine and keeping records of reports. To be a successful X-ray technician, you should have strong communication and interpersonal skills and be sensitive to the needs of the patients. You should show attention to detail and be able to work in a team. MBC is seeking full-time or part-time X-ray Tech. X-Ray Technician Responsibilities: • Explain the bone density procedure to patients., • Ensure all safety questions are asked and consent forms signed before scanning., • Position the patient properly to capture clear images of the body., • Maneuver the Bone Density equipment and positioning it to capture the correct images., • Monitor patients during scanning and maintaining patients' records., • Monitor Bone Density equipment functions., • Ensure clear images for Physicians to provide accurate diagnoses., • Cleaning and performing routine maintenance tasks to keep X-ray equipment operating smoothly, • Quality Assurance- as needed, • Commitment to patient safety and confidentiality, • ARRT registry preferred, • Computer skills We Offer: • Competitive Salary, • Medical, Dental & Vision Insurance, • Short and Long Term Disability, • Life Insurance, • 401(k) Plan, • Paid Vacation & Holiday Visit us at Montclair Breast Center is an equal opportunity employer. Job Details Pay Type Hourly Company DescriptionGenesis Global Group is a privately held collection of vertically integrated domestic and international companies that delivers deep expertise, objective solutions, customized products and unparalleled service spanning the sectors of biotechnology, health care, manufacturing, real estate, and hospitality.Genesis Global Group is a privately held collection of vertically integrated domestic and international companies that delivers deep expertise, objective solutions, customized products and unparalleled service spanning the sectors of biotechnology, health care, manufacturing, real estate, and hospitality.

Job Description Summary: A Medical Laboratory Technologist is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease. Responsible for operation of the laboratory. Hematology experience required. Night shift. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Bachelor degree in Biological, Chemical, Physical science or equivalent · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job Description We are seeking a Tool Room Machinist to join our team! You will operate and repair a variety of machines to produce and maintain metal stamping tools and dies. Responsibilities: • Operate machine tools to produce tooling to produce precision parts, • Modify parts and materials to improve overall production, • Test completed equipment to detect and remove defects, • Perform routine maintenance on machinery, • Previous experience in machinery or other related fields, • Familiarity machine shop tools and equipment, • Strong analytical and mathematical skills

Job Description URGENTLY HRIING A Maintenance Supervisor for a leading Packaging Company!! 2nd shift: 3:15 pm to 11:45 pm, with a requirement to train on 1st shift for a minimum of one month. Pay: $80,000 - $115,000 Location: West Caldwell, NJ Responsibilities • Follow all GMPs and relevant SOPs., • Perform minor troubleshooting and repair of packaging machines and equipment daily., • Maintain machine parts and keep changeover tooling in good condition., • Provide general preventive maintenance to packaging machines and equipment as required., • Accurately fill all required maintenance documentation including Cleaning Logs, Parts Requisition Maintenance Report, Daily Quality Checks, and Part Requisition Sheets., • Ensure all safety components and guarding from all packaging machines and equipment are operational and in proper use., • Strive to increase productivity by completing maintenance, changeovers, and repair work in a timely and efficient manner., • Maintain equipment, parts, and determine inventory spare part levels. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in WEST CALDWELL,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Responsibilities: -Sets up and operates conventional, special purpose, and/or numerical control (CNC)machines and machining centers to fabricate metallic and nonmetallic parts. -Measures and marks dimensions and reference points on material or workpiece as guides for subsequent machining. -Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines such as mills, lathes, jig borers, grinders, and shapers. -Sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media. -Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls or control media as required. -Verifies conformance of finished workpiece to specifications. -Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data. -Fits and assembles parts into complete assembly. -Verifies dimensions and alignment of assembly. Qualifications: -Mechanically inclined - Uses intuition and experience to complement assembly. -Must be attentive to detail. -Strong verbal communication skills needed. Responds to others and questions appropriately. Able to read and interpret written information. -Must be a team player and dependable - Must be consistently at work and on time. -Professionalism - Accepts responsibility for own actions. Applies feedback to improve performance. -Safety and Security - Observes safety and security procedures. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, etc. -Ability to apply common sense understanding to carry out instruction. -Must read, write, and understand English. Education: -Associate degree (A. A.) or equivalent from two-year college or technical school; or 6months to 1-year related experience and/or training; or equivalent combination of education and experience. Physical Demands: Frequently required to stand; walk; sit; use hands to handle feel, reach. May frequently lift and/or move up to 40 pounds. Uses close vision, distance vision, color vision, depth perception and ability to adjust focus.

Job DescriptionDescription: Job Title: Machine Maintenance Technician Our manufacturing company is seeking a skilled Machine Maintenance Technician to join our team. The ideal candidate will have experience in machine maintenance and repair in a manufacturing setting, though experience in the following mechanical trades will also be considered: heavy or industrial machine mechanic (forklift, construction machinery, truck mechanic, boat mechanic). Responsibilities: • Perform routine maintenance on various machines and equipment to ensure safe and efficient operation., • Diagnose and repair mechanical, electrical, and hydraulic/pneumatic issues., • Use diagnostic tools such as multimeters., • Read and interpret electrical schematics to troubleshoot and repair electrical issues., • Rebuild and repair hydraulic and pneumatic systems as needed., • Use basic welding skills to repair and fabricate machine parts., • Apply basic mechanical engineering knowledge to improve machine performance and efficiency., • Medical, Dental, Vision, • Vacation and sick time, • Company-provided life insurance, • Supplemental benefits: Short- and Long-term Disability, • Education Assistance, • 401k match of up to 4% Minimum of 2 years of experience in machine maintenance and repair. • Ability to read and interpret electrical schematics., • Ability to diagnose electrical problems using a multimeter., • Knowledge of pneumatics/hydraulics and the ability to rebuild and repair them., • Basic welding knowledge., • Strong problem-solving skills and attention to detail., • Ability to work independently and as part of a team., • Proficiency in English (verbal and written) for effective communication and following precise instructions., • Must have a current and valid driver's license., • Ability to lift heavy objects and perform physical tasks as required. Pre-employment screening: A legally compliant background check, motor vehicle record check, and pre-employment drug screening are required. Employment Eligibility All applicants must complete the I-9 Employment Eligibility Verification form upon hire and provide acceptable documents to verify their identity and work authorization as required by federal law. Equal Opportunity Employer We are an equal opportunity employer and comply with all applicable laws regarding discrimination and hiring practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, or any other characteristic protected by law.

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure Additional Information Physical: Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Ability to lift up to 50 lbs. Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $17.45 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job DescriptionCompany Description Headquartered in Cordova, TN, Stratas Foods is a 50/50 joint venture formed in October 2008 between ACH Food Companies and Archer Daniels Midland Company. Stratas Foods is built on the combined strengths and expertise of these two great parent companies, laid down over the course of over 200 years of combined experience. Stratas will continue to build on this foundation of excellence by providing value added, branded and custom formulated fats and oils solutions to the Food Service, Food Ingredient and Retail sectors. At Stratas Foods we are committed to being the most valued supplier of fats, oils, dressings, mayonnaise and salad dressings to the private label retail bottled oils market in the United States. Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood, NJ; Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Operator I will operate machines such as filling equipment, cappers, labelers, sealers, and other related equipment to meet customer order driven production schedule. To perform duties in operating, repairing, overhauling mechanical equipment. Supervise the operation of machines and equipment. This operation is to be performed keeping safety as a primary objective and following established GMP, Safety, Regulatory and Stratas Foods procedures and policies. Responsibilities: • Must follow GMP’s and safety guidelines and wear PPE and adhere to all safety rules, • Determining machine adjustments based on product specifications and material requirements, • Setting stops or guides to specified length as indicated by scale, rule, or template, • Observing machine operation and detecting product defects and/or machine malfunctions, • Actively identifies mechanical issues which have the potential for machine breakdown and/or downtime for reporting to supervisor and reducing downtime, • Properly recording reasons for down time in CDC system, • Stopping and resetting equipment when malfunctions occur, clearing machine jams, and reporting impairments to the Production Supervisor, • Performing periodic product sample weights to ensure proper fill weight and ensuring quality and conformity of filled products against the customers standards, • Replacing and replenishing containers of product to be filled and packaging supplies such as: film, laminate, and mount rolls on spindles, • Responsible for completing documentation required for product quality assurance, • Responsible for performing change overs and minor machine maintenance and adjustments as required, and effectively communicating with maintenance personnel when maintenance requirements are more considerable, • Provide assistance to mechanics during preventative maintenance and machine service or repairs following proper Lockout/Tag out proceduresQualifications, • High School Diploma, • Experience operating in a fast paced, ready to eat food facility a plus, • Ability to be self-guided and motivated to operate independently, • Strong multi-tasking skills, • Ability to work well under pressure Additional Information Physical: Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Ability to lift up to 50 lbs. Sensory: Ability to hear, see, speak, smell and touch well is necessary to perform basic essential task. Pay Range: $17.45 Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job Description 1.0 JOB SUMMARY: 1.1 The CNC Operator produces machined parts by operating a Haas Milling Machine, maintaining quality and safety standards, keeping records, and maintaining equipment and supplies. 2.0 ESSENTIAL FUNCTIONS: • Sets up mills and lathes by installing and adjusting chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers, indicating vices, milling heads., • Loads feed mechanism by lifting stock into position., • Verifies settings by measuring positions, first-run part, and sample work piece., • Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations, taking measurements, detecting malfunctions, sharpening and replacing worn tools, adhering to quality assurance procedures and processes., • Maintains safe operations by adhering to safety procedures and regulations., • Maintains equipment by completing preventive maintenance requirements, following manufacturer's instructions, calling for repairs., • Maintains continuity between changing operators by documenting and communicating actions, irregularities, and continuing needs., • Documents actions by completing production and quality logs., • Accomplishes assigned tasks by accepting ownership of new and different requests, exploring opportunities to add value to job accomplishments. 3.0 ADDITIONAL RESPONSIBILITIES: • Verbal Communication., • Use of Controls and Instrumentation., • Supply Management., • Tooling., • Inventory Control. 4.0 EDUCATION AND EXPERIENCE • Specialized training, or a combination of training and experience., • Self-motivated with a high degree of initiative and sense of urgency., • Ability to work independently, prioritize multiple projects, address multiple issues, and handle multiple deadlines, in a hands on environment., • Interdependent partnering skills, team orientation and demonstrated ability to influence outcomes., • Solid decision making skills., • Excellent verbal communications skills., • Strong skills working with various CNC machine programs. 1,0 Resumen del trabajo: 1,1 el operador CNC produce piezas mecanizadas operando una máquina de control numérico (CNC), manteniendo los estándares de calidad y seguridad, manteniendo registros y manteniendo equipos y suministros. 2,0 funciones esenciales: • Fija los molinos y los tornos instalando y ajustando los mandriles, herramientas, aditamentos, portaherramienta, bujes, levas, engranajes, topes y empujadores de valores, indicando los vicios, los cabezales de fresado., • Carga el mecanismo de alimentación levantando la culata en su posición., • Verifica la configuración midiendo posiciones, primera parte y pieza de trabajo de muestra., • Mantiene las especificaciones observando la perforación, ranurado y corte, incluyendo las operaciones de torneado, orientación, moleteado y perfilado, tomando medidas, detectando anomalías, afilando y reemplazando herramientas desgastadas, adhiriéndose a procedimientos y procesos de garantía de calidad., • Mantiene las operaciones seguras respetando los procedimientos y reglamentos de seguridad., • Mantiene el equipo completando los requisitos de mantenimiento preventivo, siguiendo las instrucciones del fabricante, solicitando reparaciones., • Mantiene la continuidad entre los operadores cambiantes al documentar y comunicar acciones, irregularidades y necesidades continuas., • Documenta las acciones mediante la realización de registros de producción y calidad., • Realiza tareas asignadas aceptando la propiedad de solicitudes nuevas y diferentes, explorando oportunidades para agregar valor a los logros del trabajo. 3,0 responsabilidades adicionales: • Comunicación verbal., • Uso de controles e instrumentación., • Control de inventario. 4,0 educación y experiencia: • Formación especializada, o una combinación de formación y experiencia., • Motivación propia con un alto grado de iniciativa y sentido de urgencia., • Capacidad para trabajar de forma independiente, priorizar múltiples proyectos, abordar múltiples problemas y manejar múltiples plazos, en una mano en el entorno., • Habilidades de asociación interdependientes, orientación al equipo y capacidad demostrada para influir en los resultados., • Sólidas habilidades para tomar decisiones., • Excelentes habilidades de comunicación verbal., • Habilidades fuertes trabajando con varios programas de máquinas CNC.

Job Description Immediately hiring a CNC Programmer in Westville, NJ We're seeking a CNC Programmer for a premier precision components manufacturing company in the Westville, NJ area. This is a Direct Hire opportunity and we're hiring immediately! The ideal candidate will have experience 3+ years of CNC programming machining experience with a focus on setup, operations and program editing. If you are interested, please submit your application! All qualified candidates will be contacted Shift/Pay: 5 Days a week 8:30AM - 4:00PM@ Monday- Friday $29-$34 depending on experience Job Description The role of a CNC Programmer and Operator involves programming, setting up, and operating CNC machines to manufacture steel molds for the rubber industry. The position requires writing and editing programs, as well as programming directly at the controls. Additionally, the candidate will set up 3 Fadal CNC machines, perform edits and changeovers as needed for production. Operating the machines to produce quality, finished products that meet customer specifications is essential, along with conducting visual inspections of the products. Responsibilities • Program, set up, and operate CNC machines., • Write and edit CNC programs., • Set up 3 Fadal CNC machines and perform necessary edits and changeovers., • Operate CNC machines to produce quality products that meet customer specifications., • Conduct visual inspections of products to ensure quality., • Run molds and manufacture products for quality control., • Proficiency in CNC programming and machine operation., • Ability to program at the controls., • Experience with CNC setup, edits, and changeovers., • Familiarity with measuring tools such as calipers., • Education in CNC programming is ideal., • Ability to perform tooling changes., • Experience in quality control processes., • Ability to work independently with minimal supervision., • Willingness to learn from experienced colleagues. Enjoy competitive compensation with a potential $5K signing bonus after six months. Benefit from a 401K plan, health insurance, and PTO/Vacation. Work a flexible 8 AM to 4 PM schedule, with no requirement for overtime or weekends. Join a family-run business with a laid-back, well-lit, and clean work environment. Work Environment The work environment is a family-run machine shop with air conditioning, providing a laid-back and friendly atmosphere. The shop is well-lit and fairly clean, operating Monday to Friday from 8 AM to 4 PM. Job Type & Location This is a Permanent position based out of Westville, NJ. Pay and Benefits The pay range for this position is $60000.00 - $72000.00/yr. Willing to pay for right candidate up to 40/hr. Even consider paying 5K signing bonus. We talked about paying that after 6 months as a bonus 401K Health Benefits and Insurance PTO/Vacation 8AM to 4PM schedule, could probably be somewhat flexible if needed They don't have to work OT or Weekends unless they really wanted to Workplace Type This is a fully onsite position in Westville,NJ. Application Deadline This position is anticipated to close on Dec 27, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Salary: $100000 - $135000 Pay Grade: 16 Other Forms of Compensation: ESFM is the corporate facilities management (FM) division of Compass Group USA, a Gold-level Corporate Sustaining Partner of the International Facility Management Association (IFMA), and a Platinum Corporate Member of the Association of Energy Engineers (AEE). ESFM self-performs 80% of all FM services provided to clients. Our portfolio of solution categories includes Facilities Maintenance & Engineering, ESG Programming, Laboratory Support Services, Janitorial & Industrial Cleaning, Landscaping & Grounds Management, Workplace Solutions and Managed Services. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. ESFM’s clients include many household names from the life sciences, technology, oil & gas and manufacturing markets. Job Summary We are seeking an experienced Chief Engineer to lead and manage all hard facilities operations and maintenance activities within our facility. This critical role ensures the smooth functioning of scientific, production, and formulation equipment while supporting soft services such as custodial operations, client-facing staff, and grounds maintenance. If you thrive in a fast-paced, production-oriented environment and have a passion for operational excellence, we want to hear from you! Key Responsibilities • Lead and oversee all hard facilities operations and maintenance activities., • Troubleshoot electrical equipment and PLC systems., • Manage mechanical services for facilities and scientific areas (FMO support)., • Repair and maintain facility, production, and formulation equipment through preventive maintenance programs., • Coordinate fabrication of machine parts to maintain operational efficiency., • Ensure compliance with OSHA and facility safety standards., • Install and maintain systems supporting facility operations (DI water, compressed air, chilled water)., • Assist with equipment setup and disassembly based on production schedules., • Partner with outside vendors and manage new equipment installations., • Maintain instrument calibration using CMMS systems (e.g., ARCHIBUS)., • Manage spare parts inventory to minimize downtime., • Source parts and equipment as needed., • Support administrative tasks related to ordering and closing work orders., • Participate in safety programs (JSA, SHAP, MESUR, EHS inspections)., • Provide technical support to Demi-Grand, Pilot, and Lab operations., • Oversee BMS programs and support facility mechanics. Capabilities & Technical Skills • Advanced knowledge of air conditioning, refrigeration, and heating principles., • Working knowledge of boiler systems., • Proficiency in balancing air and water treatment systems per HVAC protocols., • Skilled in mechanical and electrical installation of equipment., • Strong troubleshooting skills for electrical equipment and PLCs., • Familiarity with OSHA safety standards and compliance requirements. Qualifications • Bachelor’s degree in engineering., • 7+ years of experience in facilities engineering or maintenance., • Strong leadership and communication skills., • Ability to excel in a fast-paced, production-oriented environment. Apply to ESFM Services today! ESFM is a member of Compass Group USA Click here to Learn More about the Compass Story Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Applications are accepted on an ongoing basis. Eurest Services maintains a drug-free workplace. Associates at ESFM are offered many fantastic benefits. • Medical, • Dental, • Vision, • Life Insurance/ AD, • Disability Insurance, • Retirement Plan, • Paid Time Off, • Holiday Time Off (varies by site/state), • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs), • Paid Parental Leave, • Personal Leave Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. Req ID:1466569 ESFM Julia Lari

Job Description • We are hiring immediately for a full time MECHANIC I position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. More details upon interview., • Requirement: Prior experience with supporting building equipment and process equipment is preferred., • Pay Range: $28.00 per hour to $45.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1481138. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, including HVAC systems, high-pressure boilers, generators and steam equipment. Reads and records information from meters and gauges at specified intervals to verify operating conditions. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines and equipment; maintains equipment inventory., • Sets up and operates mechanical equipment and small hand tools (e.g., drills, grinders welding torches) for machine and equipment repair., • Maintains clean and safe work environment; performs job safely., • Consistently demonstrates support of the department by striving for excellence., • Contributes to the team; exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description Industrial Maintenance Manager This position is at our Hillside/NJ office location Salary $100,000-$110,000 Overview of the Industrial Maintenance Manager role: Industrial Maintenance Manager oversees the upkeep, maintenance, and repair of an organization's facilities, equipment, and machinery to ensure smooth, reliable, and efficient operations. Essential or Primary / Key Responsibilities: * Hire, train, and supervise maintenance technicians, providing leadership and fostering a productive environment. * Create and implement preventive and corrective maintenance plans to reduce downtime and prevent costly breakdowns. * Enforce safety standards and protocols to maintain an accident-free work environment for the maintenance team and the organization. * Track and manage spare parts, components, and tools to ensure availability for maintenance tasks * Coordinate maintenance activities within individual departments to minimize interference with production schedule. * Assume responsibility for related duties as required or assigned. Additional Duties / Responsibilities: * Ability to lead, motivate, and develop a team of maintenance professionals. * Ability to evaluate machine resources and performance to ensure continued production. * May need to occasionally work flexible hours including night and weekends with little advanced notice. Minimum Required Qualifications: * Bachelor’s degree in Engineering or related field (relevant experience may substitute). * Experience: 8–10 years in industrial maintenance, with at least 5 years in a manager/supervisory role. * Ability to read technical manuals and drawings. * Strong mechanical knowledge and hands-on experience in maintenance tasks are crucial. * Valid State Driver's License/Insurance required for vehicle travel, as needed * Must be authorized to work in the U.S. * Must have the ability to travel Work Environment: * This is a full-time in-person position. * The primary work environment is a warehouse environment, with occasional visits to job locations. Please be aware that job site visits may involve exposure to various environmental conditions, including cold, heat, high noise levels, and heights and may require extensive walking or climbing. * Local, non-local, travel is required for this position, up to 15% of the time. Physical Requirements: * While performing the duties of this job, the employee at times may need to climb, reach, bend, lift and carry items * Regularly required to stand, sit, walk, and move about the facility and other locations * May be required to lift, push, pull and/or move items weighing up to 50 pounds * Ability to climb up ladders and get on a roof Comprehensive Benefits: * Health Insurance – medical/dental/vision * Life Insurance * Retirement plan (401) k * Vacation/Sick days * Flexible Spending Account (FSA) * Dependent Care Flexible Spending Account (DCFSA)

Job Title: Instrumentation Control Technician Location: Lyndhurst, NJ Type: Contract To Hire Compensation: $33 - $36 hourly Contractor Work Model: Onsite Hours: Monday through Friday (6AM to 230PM) Responsibilities: Analyze, document, and test computer control systems based on user specifications and operating requirements. Develop, test, and document computer programs related to machine control and operating systems. Perform maintenance, troubleshooting, and calibration of instrumentation and control devices to ensure accuracy and reliability. Manage the calibration program, including scheduling, performing calibrations, and maintaining records in Calibration Manager Software in compliance with ISO 9000 standards. Support the maintenance and repair of labeling equipment, electrical systems, and electronic devices. Apply systems analysis techniques and collaborate with end users to identify and resolve control system needs. Provide weekend or on-call support as needed for troubleshooting and plant operations. Qualifications / Experience: 5–10 years of experience in an ISO 9000 or process-type industrial facility (chemical, pharmaceutical, or food industry preferred). Minimum 1 year of relevant experience with Technical School training; college degree a plus. Strong electrical background with hands-on experience in computer systems, PLCs (Allen-Bradley preferred), and pneumatic/hydraulic devices. Familiarity with CMMS software and smart instruments is a plus. Skilled in analyzing, testing, and troubleshooting with an organized, methodical approach to problem-solving. Ability to read and interpret technical drawings (P&IDs) and ladder logic diagrams. Proficient in performing instrument calibration and preventive maintenance. Strong communication skills and the ability to work independently or as part of a team. System One, and its subsidiaries including Joulé, ALTA IT Services, and Mountain Ltd., are leaders in delivering outsourced services and workforce solutions across North America. We help clients get work done more efficiently and economically, without compromising quality. System One not only serves as a valued partner for our clients, but we offer eligible employees health and welfare benefits coverage options including medical, dental, vision, spending accounts, life insurance, voluntary plans, as well as participation in a 401(k) plan. System One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, age, national origin, disability, family care or medical leave status, genetic information, veteran status, marital status, or any other characteristic protected by applicable federal, state, or local law. #M1 Ref: #562-Joule Staffing - Edison

Job Description • We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview., • Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required., • Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability., • Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment., • Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational., • Recommends appropriate sources of electrical power for new installations or renovation projects., • Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc., • Performs corrective maintenance in accordance with the work order system., • Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner., • Maintains clean and safe work environment; performs job safely., • Exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: • Valid Non-CDL Class C driver's license., • Valid current state/local electrical license., • Two years of trade school or related experience., • Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation., • Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job DescriptionSalary: 15.13 CLIENT SERVICES TEAM Short Hills, NJ Reports To: Studio Manager Employment Status: Part Time/Non-Exempt KEY RESPONSIBILITIES • Greet and engage clients in a positive and friendly manner, • Provide the highest level of client/customer service and hospitality to all clients/prospective clients, • Share pricing and class information with prospective clients, • Deliver Megaformer machine demos to new clients, • Complete studio tours with new clients, • Work alongside and support SLT instructors to ensure a successful and seamless client check-in and class experience, • Ensure complete knowledge of Mariana Tek system, • Assist Management with day-to-day operations of the studio, • Ensure prompt response to studio emails; notify Studio Manager if needed, • Understand SLT product knowledge, policies and procedures for retail operations, • Complete basic Megaformer machine maintenance, • Actively maintain studio cleanliness and organization between each class so each client receives the best SLT experience, • Assist in retail inventory at the end of the month, • Complete opening and/or closing checklists, • Perform other studio duties as needed QUALIFICATIONS • Mariana Tek software experience a plus, • Leadership experience a plus, • Must have superior customer service skills, • Must have excellent interpersonal skills and a service-oriented outlook, • Must be highly organized, • Ability to work independently as well as on a team, • Should have a strong ability to communicate clearly with team members, clients and senior management, • Must be able to move and/or lift heavy items, up to 50 lbs. WORK REQUIREMENTS • Must be available to work:, • Minimum of three shifts per week; minimum 4 hours each, • Ability to work flexible hours; early morning/late night/ weekends, • Some holidays (open year-round) SLT actively seeks a diverse applicant pool in order to build the strongest possible team. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionTo proceed with your application for this position, please complete the Predictive Index Behavioral Assessment linked below. Ensure you finish the assessment for your application to be reviewed. Behavioral Assessment Link POSITION SUMMARY: The Fitness Floor staff plays a key role in providing a positive and supportive environment for members, guests, and fellow staff. In this visible position the Fitness Floor Staff meet members on a day-in-day-out basis. The incumbent must be flexible and have the ability to establish positive relationships with both members and staff. Must ensure that members have a safe, effective, and satisfying workout. Staff is successful when they increase member engagement and encourage our members to participate in our programs. OUR CULTURE: At the YMCA of Montclair, we strive to be the Employer of Choice, provide World-Class Service, and be the Charity of Choice. Our goal is to be a place where employees are empowered and excited to come to work. All staff ensure that members experience customer centric, individual attention each day. We strive to be the preferred partner collaborating with others, identifying, and meeting our community needs. ESSENTIAL FUNCTIONS: • Through eye contact, body language, voice and general presence, the Floor Staff must always communicate accessibility to members, by circulating through the rooms, making eye contact, and introducing themselves to members and learning members’ names. (No cell phones, reading, sitting, eating, or socializing in the fitness centers.), • Conduct Fitness Center Orientations, consistent with the Health and Wellness Department training design. This involves teaching members how to implement a basic personal exercise program, using YMCA equipment and facilities. This also includes having full knowledge of Antitax and the ability to successfully enroll a member in the system including providing the required fitness testing and follow up with members after initial orientation., • Promote member interaction while providing a supportive and encouraging atmosphere, by assisting members with their health and fitness goals. Demonstrate for members the proper technique of how to use the wellness center equipment., • Address questions and needs of the members. If floor staff are unaware of the answer, they will report to the appropriate staff, and learn the answer., • Periodically tour all exercise rooms., • Enforce all posted rules., • Must be able to promote healthy living while remaining responsive to members’ needs and concerns, by providing an environment conducive to member satisfaction and retention., • Floor Staff will direct members with any special medical limitations or concerns to the Health and Wellness Director., • Safeguards any malfunctioning fitness equipment with an "out of order" sign and records updates in maintenance log and on checklist to be completed at end of shift., • Supervise member's behavior and exhibit patience and tact while ensuring adherence to member code of conduct and Fitness Center rules and procedures, (in particular the 30-minute time limit on cardio equipment when others are waiting)., • Maintains neat and orderly fitness facilities, (plates are racked, magazines stacked, old papers thrown out, floor is clear, equipment is wiped clean, etc.) This includes completion of a checklist by the end of the shift which must be left in the Health and Wellness Director’s mailbox., • Always is well groomed and presentable, wearing an appropriate YMCA staff shirt and I.D., • Responsible for securing another Fitness Center Floor staff substitute when unable to work scheduled shift, and effectively communicating the substitution to both the substitute and Health and Wellness Director., • Accepts other assignment as requested by the Health and Wellness Director., • Manages radio station/TV stations and volume level, (when in doubt or challenged by a member, turn the radio volume down)., • Practices risk management by anticipating potential safety hazards and taking appropriate action to reduce or eliminate the risk while reacting quickly and effectively to any emergency, (this may involve initiating a "Code Blue")., • Record incident/accident reports according to the YMCA policies and procedures., • Promotes any special fitness programs/incentives etc. that the department is running and has full knowledge of the programs including the ability to answer any related questions., • Promotes a fitness environment that is friendly, welcoming, and conducive to member retention., • Conduct personal and professional behavior in a manner consistent with the best interest of the Association, so as not to bring discredit to the Association., • Anticipates and or quickly reacts to member conflicts and takes appropriate corrective action. (Example: manages the waiting list for the cardio machine, clarifying how much time is left for existing users to assist members who are waiting)., • Participate in appropriate staff meetings and training activities and maintain CPR/ First Aid Certification., • Follows hand scan procedures and is accurate in recording work hours., • Provide high quality customer service to all members and is able and willing to conduct YMCA tours to new or prospective members., • Assist with the emergency evacuation of the building and other special situation tasks, as needed., • The effectiveness of this position should be observable and measured by membership satisfaction surveys and evaluations, both formal and casual., • Adheres to policies related to boundaries with members, volunteers, staff, and participants., • Attends required Abuse Risk Management training and adhere to procedures related to managing high-risk activities and supervising members and participants., • Reports suspicious or inappropriate behaviors and policy violations and follow mandated abuse reporting procedures., • Ensures unused rooms and closets remain locked; routinely monitors high-risk locations (locker rooms and restrooms, etc.). LEADERSHIP COMPETENCIES: • Emotional Maturity, • Communication, • Critical Thinking and Decision Making QUALIFICATIONS: • Must have a working knowledge of the proper use of all YMCA of Montclair fitness equipment and ability to instruct members on fitness program development, implementation, progression, proper form and technique, exercise science knowledge, and high standards of safety, based on YMCA training principles., • Must be at least age 18., • Must have a CPR/AED and First Aid Certification OR get certified within 90 days of employment., • Must complete Y-USA online training within three business days from the date of hire. Complete any other YUSA training as needed., • Must have a positive, upbeat attitude and strong member service skills, with the ability to relate effectively with a diverse population. WORK ENVIRONMENT & PHYSICAL DEMANDS: This work requires the following physical activities: climbing, bending, stooping, kneeling, twisting, reaching, sitting, standing, walking, lifting, finger dexterity, grasping, repetitive motions, talking, hearing, visual acuity, and swimming. The work is performed primarily indoors. Must be able to lift 50lbs. COMPANY BENEFITS: • YMCA Membership: Enjoy access to our YMCA facilities at no cost., • 25% Discount on YMCA Programs, • Employee Referral Bonus: Earn rewards for referring to qualified candidates., • Employee Discounts: Access exclusive discounts on various products and services., • Paid Time Off (PTO): Eligibility after 90 days of employment. HOURLY PAY RATE: Up to $18.00 WORK SCHEDULE: • Tuesday: 9:00 AM – 2:00 PM, • Wednesday: 9:00 AM – 2:00 PM, 3:00 PM – 9:30 PM, • Thursday: 9:00 AM – 2:00 PM, • Friday: 3:00 PM – 9:30 PM, • Saturday: 1:00 PM – 6:30 PM, • Sunday: 1:00 PM – 6:30 PM

TGIF - 400 S Park Ave [Busser / Porter / Cleaner] As a Dishwasher at TGIF, you'll: Ensure dishes and cookware are sanitized and available as needed; Maintain daily cleanliness and maintenance of dish machine; Clean and sanitize service area and kitchen throughout shift; Complete assigned prep work a

Job DescriptionDescription: Summary/Objective A Head Barista is responsible for upholding the standard of quality of the Bluestone Lane coffee and beverage program within their home store. The Head Barista is a positive influence over other baristas and strives for the highest of standards in drinks, local interactions, attitude and brand ambassadorship. The Head Barista acts as a role model in their own drink quality, local interaction and food preparations while also taking significant responsibility for on the job training and education of their teammates in store. The Head Barista is responsible for all aspects of the coffee menu in full in their assigned store as well as strong support for their relevant manager. This role follows the Steps of Service to maximize sales while providing a high level of customer service. The Head Barista serves our locals and runs drinks to tables Monday through Friday. The Head Barista is a cross-functional role and rotates off the machine with responsibility for POS and take-away orders working alongside their Server Teammates. Positioning: The Head Barista is cross-functional and positioned either behind the machine when assigned, at the POS, or on the on the café floor so that they are accessible and within eyes reach of our local Essential Functions/Responsibilities: Ownership: ? Store level extension of Education team; coffee/beverage quality and processes gatekeeper for café ? Teamwide holistic education and training of coffee product & coffee/beverage program ? Face of Bluestone Lane coffee to locals & teammates ? Manages coffee related equipment and tool cleaning and maintenance (daily cleaning and periodic maintenance) ? Inventory management of coffee and coffee-related product Spend through Service: ? Deep understanding of the menu in order to educate and excite local ? Services tables with focus on upselling food & beverage. Keen eye to refill beverage at right time ? Comes around the machine to personally deliver drinks to locals ? Engages and attend Monthly Head Barista meetings ? Upskills teams and initiates training and accreditation requests for teammates when needed Head Barista – Cafes 07.2019 Page 1 of 3 happiness ambassador – fair go – ride the wave - mateship ? Out of LA and NY – One senior HB to facilitate accreditations upholding BL coffee quality and hospitality philosophies. ? With Manager, responsible for upskilling team and initiating training and accreditation requests when needed ? Train, educate and acclimate new baristas into store and BL system Human Connection: ? Serves as Teammate rotating off machine to run POS, serve locals, clear tables & process takeaway ? Locals focused, interacting and servicing locals with beverage needs ? Sets tone in store with recognition and connection with locals – name, face & order every time ? Builds relationships and human connection through personalization and conversation ? Provides input to GM/Ops in selection and hiring of new baristas ? Attends regular calibration sessions with Education team (1 every 6-8 weeks, ability to travel may be needed) Premium Broad Product: ? Contributes to and builds upon innovations which assist workflow and operations in store and speed of service ? Zenput inputs such as monthly staffing reports to Education team, monthly coffee and process audits & ownership of store achieving correct extraction via daily dial in ? Focus on coffee, beverage product and workflow systems of each barista within the team while providing a positive influence in upholding BL standard of hospitality. ? Coffee product rotation, ordering and quantity management following standard operating procedures (i.e. coffee used within 3 weeks of roast for beverage preparation, Retail coffee no older than 7 days on shelves) ? Minimizes waste – ensure proper ordering Beautiful Spaces: ? Ensures bar and workspace are always clean and fully functioning ? Speed of service – provide quality product with speed and accuracy ? Maintains grooming guidelines as all times ? Shift leader who assists General Manager to direct and manage live labor; ensures operational excellence in absence of GM Measures of Success: ? Cross-functional operations -flexible and agile moving from machine to serving local – service focused and quality driven ? Baristas in training are ready for test within 30 days of employment ? Pipeline of Baristas ready for accreditation ? Knows locals’ name & order – provides genuine escape by delivering great service ? Good communication & working environment with Servers – working together to service local efficiently and effectively ? Consistent coffee quality from all baristas in the café ? Reduces coffee waste Requirements:

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic to join our maintenance team and help keep our production running smoothly. Responsibilities: * Troubleshoot, maintain, and repair plastic processing machinery and equipment * Perform preventative maintenance on machines to ensure optimal performance * Assist with equipment setup, changeovers, and calibration * Maintain maintenance logs and records * Ensure safety standards are followed at all times Requirements: * Mechanical experience in an industrial or manufacturing setting * Familiarity with plastic processing equipment is a plus * Strong problem-solving skills * Ability to work independently and as part of a team * Must be reliable and safety-conscious

Job DescriptionYummy Açaí – Maintenance Technician (Industrial / Manufacturing)Elizabeth, NJ 1st Shift – 7:00 AM to 3:30 PM Full-Time - Food Manufacturing Environment About the Role:Yummy Açaí is seeking a knowledgeable and hands-on Maintenance Technician to support our Acai production plant. This role is essential to ensuring equipment reliability, safe operations, and continuous improvement across our facility.Our facility uses a variety of food-processing equipment including industrial mixers, pouch fillers, cooling systems, and blending machinery. Experience with these systems is a strong plus.The ideal candidate has strong mechanical aptitude, experience in industrial maintenance, and familiarity with food processing equipment. Knowledge of HVAC and electrical troubleshooting is highly preferred. Key Responsibilities:Equipment & Facility Maintenance • Inspect, test, clean, and monitor machinery and production equipment., • Diagnose equipment malfunctions, perform troubleshooting, and complete timely repairs., • Disassemble and reassemble equipment, replacing defective or worn parts., • Perform preventive and predictive maintenance tasks on production lines, utilities, and facility systems., • Maintain accurate records of maintenance activities and downtime.Technical & Safety Support, • Work alongside the Maintenance Manager/Supervisor and cross-functional teams (Operations, Sanitation, QA)., • Address equipment, safety, or facility issues promptly to support a safe, compliant production environment., • Assist with continuous improvement projects related to equipment upgrades, efficiency, and reliability., • Follow all GMP, food safety, and sanitation requirements when working in production areas.Compliance & Documentation:, • Understand and follow maintenance SOPs and safety procedures., • Support audit readiness by keeping maintenance logs and equipment documentation up to date.Required Skills & Qualifications:, • Experience maintaining industrial food-processing mixers, ribbon blenders, paddle mixers, or other blending systems (strong plus)., • Ability to troubleshoot and repair mixing motors, gearboxes, shafts, seals, pumps, and blending components., • High School Diploma; trade school or technical certification in Industrial Maintenance, HVAC, or Mechanical Systems preferred., • 3+ years experience as a Maintenance Mechanic/Technician in a manufacturing environment (food manufacturing preferred)., • Strong mechanical aptitude; able to use hand and power tools, welding equipment, and basic machine shop tools., • Ability to mentor or train entry-level technicians., • Knowledge of state and local safety requirements related to refrigeration systems., • Ability to interpret:, • Electrical schematics, • Motor control diagrams, • PLC ladder logic (basic understanding acceptable), • Pneumatic and hydraulic diagrams, • Experience with:, • Basic electrical troubleshooting, • Plumbing repairs, • Welding / fabrication, • Refrigeration or HVAC systems (highly preferred), • Experience with preventive maintenance programs.Work Schedule & Requirements:, • 1st shift (7:00am–3:30pm), with ability to work occasional overtime, weekends, or emergency call-ins., • Ability to work in cold environments (production and freezer areas)., • Must follow GMP, food safety, and sanitation requirements.

Job Description We are seeking for a Machine Set-Up Operator to join our team! Training will be provided to ensure excellent quality control. Schedule: Monday - Friday 7am - 3:30 pm Responsibilities: • Manually set up and run the hydro form machine, ensuring all components, tools and measurements aligned., • Troubleshoot and resolve issues in a timely fashion, • Load and unload equipment, materials and finished products, • Provide innovative solutions to improve plant efficiency, • Conduct routine preventive maintenance on the plant, • Mechanical inclined. Previous experience required, • Familiarity with plant tools and equipment, • Strong troubleshooting and critical thinking skills, • Ability to handle physical workload, • English is a must Company DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description Job Description: CNC MILLING MACHINIST Must be able to PROGRAM, SETUP & OPERATE EXPERIENCE NECESSARY • Program, Set-up, & operate various CNC Milling Machines G-Code/Conversational, • Fabricates parts, • Use precision measuring instruments, • Maintains safe and healthy work environment by following standards and procedures. Machine shop with 9 employees Fully Air conditioned Medical Paid Holidays Skills/Qualifications: Manufacturing Quality, Equipment Maintenance, Manufacturing Experience, Mechanical Inspection Tools, Decision Making, Tooling, Safety Management, Quality Focus, Judgment, Job Knowledge Job Type: Full-time

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: