Trabajos machine maintenance en Linden, New JerseyCrear alertas

Job Description Summary The Cannabis Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Cannabis Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. The Cannabis Machine Operator must be able to operate and oversee specialized automated cannabis packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated cannabis packaging equipment; therefore an understanding of mechanical and electrical systems is required. The Cannabis Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. The Cannabis Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday, 6:30am to 3:00pm. 32-40 hours per week. Job Duties • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day., • Responsible for determining the work flow sequence to minimize changeovers., • Stages product work flow so it is ready for processing after pre-shift briefing to techs., • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns., • Direct assembly or disassembly, and cleaning as required for shift start and end operations., • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities., • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc., • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product., • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste., • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention., • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible., • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance., • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO., • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards, • Serve as a leader and champion of Bud's values in the Packaging operations, • Learn and operate software used for the company's Manufacturing Execution Systems Skills & Attributes • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences, • Strong organizational, critical thinking, presentation, and project management skills, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner, • Exceptional interpersonal and relationship building skills, • Advanced math and reading comprehension, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce, • Understands and thrives in fast-paced, KPI-driven production environments, • Team player willing to assist in any function of packaging and labeling, • Ability to prioritize the business in all decision making Education & Experience • HS Diploma or 2+ years of related field experience, • 1+ years of experience in a leadership role, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition, • Experience working with various complex manufacturing machines or electrical systems, • Proven track record of managing the scope of operations in a complex and highly regulated business environment, • Cannabis product knowledge strongly preferred, • Working knowledge of Metrc preferred Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Able to work a fully flexible schedule including nights and weekends if necessary, • Extensive use of hands, including repetitive movements Additional Requirements: • Must pass all required background checks, • Must have a reliable vehicle, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must possess valid driver's license, • Must be a minimum of 21 years of age, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry Benefits: We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance, as well as participation in our Operator Incentive Plan, which rewards strong performance and operational excellence. #ENGHP

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Facility MRF Control Panel Operator at Newark MRF facility plays a vital role in the recycling process by operating various recycling machines inside MRF facility. This position emphasizes attention to detail, and a commitment to safety while working in a dynamic environment. The role is designed for individuals who are eager to learn and grow within the recycling industry, contributing to the company's sustainability efforts Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Understanding of MRF Facility operations and Facility material flow., • Understanding and ability to operate MRF equipment control panels, • Communication via 2-way radio to other MRF control panel operators, supervisors and operators., • Understanding and proficiency in Lockout/Tagout (LOTO), • Follow company safety procedures and enforce safety policies., • Ability to climb ladders up to 10’, • Ability to clean and follow daily machine maintenance and cleaning guidelines Requirements and Qualifications::, • Must be able to work inside and outside, lift 50 lbs,. High school diploma required. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $17.00/Hr. Salary Range Maximum: USD $17.00/Hr.

POSITION: Facilities Engineer DEPARTMENT: Maintenance REPORTS TO: Operations Manager POSITION SUMMARY: The Facilities Engineer is responsible to fulfill the mechanical needs of both the equipment and the physical structure. This position will be responsible for the installation, maintenance, and troubleshooting of all facility equipment and machinery. In addition, he/she will be responsible for some light carpentry, painting, basic plumbing, and other duties required in the maintenance of the building. The Facilities Engineer will have direct responsibility for performing some electrical work throughout the plant and contracting, scheduling, and overseeing the work of outside labor when necessary. This individual will make recommendations regarding purchasing supplies and equipment needed to run the Maintenance Department as well as for scheduling basic equipment maintenance. He/She must consistently and efficiently perform and follow procedures in compliance to company, customer, and ISO standards. PRINCIPAL JOB RESPONSIBILITIES: • Diagnose problems and make repairs on equipment in order to minimize machine ‘downtime’ and, if necessary, schedule outside labor; i.e. factory repair., • Schedule and perform preventive and predictive maintenance on equipment., • Install and/or assist with installation of factory equipment., • Operate all shop equipment including all power equipment., • Perform some sheet metal work., • Perform electrical, plumbing, and other duties required for efficient operation of the physical plant including some HVAC programming., • Complete daily maintenance and repair logs., • Maintain and secure work tools., • Clean and maintain all work areas., • Contributes to team effort by accomplishing related results as needed., • Perform additional duties/projects as assigned by lead, management and/or Supervisor. SAFETY RESPONSIBILITIES: Must learn and comply with all Cultech, Inc. safety rules; reference to employee handbook. PRINCIPAL SKILLS AND FUNCTIONS (5+): • Ability to work independently and as part of a team with a high level of initiative and flexibility., • Capable of understanding technical customer requirements., • Ability to work and multi-task under pressure in a fast-paced environment to meet customer deadlines., • Constantly produces high quality work and maintain established production standards. JOB REQUIREMENTS: • High school education required; College degree with an emphasis on engineering preferred., • Licensed in electrical preferred; proficiency required., • Proficient in machine repair., • Proficient in use of welding equipment., • Knowledge of printing specific equipment, • Skilled in plumbing, carpentry, HVAC, electrical, and piping skills., • Familiarity with OSHA standards regarding potential job hazards and protocols., • Must be able to stand for long periods of time and work in potentially uncomfortable positions., • Ability to work effectively in a team environment., • Must be attentive to detail., • Must be able to comprehend and follow all job procedures and safety protocols. ADDITIONAL REQUIREMENTS: Employees must fulfill the performance standards of this position and comply with policies, rules and procedures of Cultech, including those set out in the Employee Handbook or otherwise communicated (verbally or in writing) to employees.As necessary, employees are expected to manage waste and chemical products properly. This job description is intended to describe the general nature and work responsibilities of the position and is not intended, and should not be construed, to be an all-inclusive list of responsibilities, skills, efforts or working conditions associated with this position. This job description and the duties of this position are subject to change, modification and addition as deemed necessary by Cultech management. Employees are required to comply with supervisory instructions and perform other job duties, responsibilities and assignments as requested by supervisors or management. The job responsibilities of this position may include cross training in other functions or positions to ensure satisfactory operation of the department or work area. This job description does not constitute an employment contract between Cultech and any employee.

Job Purpose To use your unique talents, experience, skills, education and enthusiasm to complete the Operations team and to recognize that your contribution is essential to the vision of Ring Container Technologies. Key Responsibilities and Duties Ensure the safe and efficient operation of all equipment to meet or exceed company established Overall Equipment Effectiveness (OEE) expectations and customer quality expectations. • Monitor equipment OEE for inefficiencies and recommend and/or make necessary improvements., • Develop improvements for safer and more efficient operations., • Ensure all machines guards are in place and functional., • Ensure all unsafe conditions are corrected immediately., • Ensure Lock out / Tag out policy is followed., • Troubleshoot all major problems. Responsible for continuing/implementing the Ring Family Culture in the facility. • Employees are the first priority, production is secondary., • Welcome employees to the plant every day inquiring about their personal lives and showing that Ring cares about our employees., • Manage by walking around during the shift initiating conversations with questions regarding the well-being of the employee., • Catch someone doing something well and praise. Recognize their efforts., • Understand that all employees are people and all of us have challenges. Search for the reason behind the issue, actively listen and resolve to the benefit of all. Responsible for leading and supporting employee engagement initiatives. • Conduct focused walks semi-weekly through the plant to engage with the employees., • Utilizing active listening skills, ask probing questions that encourage employee input on issues or opportunities related to safety, quality, performance, goals, scheduling, teamwork, etc.,, • Note opportunities for improvement and potential solutions based on employee input., • Develop strategies that all for employee led teams to implement or ‘try’, • Provide ongoing feedback to employee led teams and support efforts that lead to improved results, even during times of initial failure., • Celebrate wins and recognize employees participating on successful teams. Educate plant personnel on safe and proper operation of machinery, ensuring all employees receive proper and timely training. • Develop problem solving and troubleshooting skills in maintenance personnel. Maintain accurate and sufficient parts inventory while meeting the established budget. • Order and maintain min/max inventory levels of repair and/or replacement parts. Schedule and coordinate appropriate downtime to effectively perform preventative maintenance on all equipment. • Ensure equipment is clean and in ‘showroom condition’., • Pro-active in addressing machine inefficiencies during preventative maintenance. Maintain Computerized Maintenance Management Software (CMMS) system. • Maintain equipment files, vendor records, quotes, manuals, repair records, etc., • Record maintenance and repair costs; control costs through use of appropriate repair and/or purchasing methods. Coordinate with quality personnel to ensure machines are manufacturing products that exceed customer quality expectations. Schedule and coordinate all Total Productive Manufacturing (TPM) events with maintenance and production personnel. • Provide necessary training to all employees., • Establish and maintain TPM standards on all equipment., • Schedule events to ensure equipment meets TPM standards. Maintain employee documentation and schedule labor to meet budget requirements. • Maintain performance evaluations, attendance records and review time cards., • Direct the work of employees to correct improper work habits and/or behavior; reward good job performance and take corrective action as required. Communicate problems, progress reports and continuous improvement ideas to management staff, maintenance and production personnel. May perform the duties of Production Supervisor as needed or required. Support the development, implementation, maintenance and ongoing improvement of food safety, food defense, and quality systems to ensure compliance with federal, state, and local government regulatory food safety requirements and Safe Quality Food Institute (SQFI) or British Retail Consortium (BRC) standards. • Ensure maintenance employees adhere to food safety, food defense, and prerequisite programs (such as security, pest control, foreign material control, allergen control, chemical control, etc.) as required., • Ensure all maintenance work is performed in a food-safe manner to prevent contamination and that housekeeping duties are performed and documented according to the Master Cleaning Schedule., • Foster a culture of safety, quality, and continuous improvement which proactively recognizes and addresses deficiencies., • Ensure that sufficient maintenance budget is created each year to maintain a high standard of quality and food safety of the facility structure and all equipment. Experience, Educational and Technical Qualifications Our Maintenance Manager must have a minimum of 5 years supervisory experience in a manufacturing environment and a 4 year technical degree and/or equivalent military experience. He/she must have the ability to provide technical guidance through past experience and industry knowledge. He/she should possess strong people skills, leadership qualities, managerial abilities, a sense of urgency, accountability, business ethics, professionalism, self-motivation and the desire and focus to improve the business. #LI-BH1 Ring Container Technologies is an equal opportunity employer. It is the policy of Ring to apply recruiting, hiring, training, promotion, compensation and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information.

Job DescriptionFounded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better.Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range$34.58—$44.23 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here.ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Refrigeration Technician (Blue Seal Toxic) Location: Linden NJ (on-site) Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid drivers license

Job DescriptionWe are seeking Shop Foreman to join our team! You will manage and maintain our machine a repair shop. Responsibilities: Manage jobs and employees. • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications: SHOP FOREMAN EXPERIENCE REQUIRED PUMP MECHANIC EXPERINCE PREFERRED • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

We are seeking a highly skilled CNC Programmer/Operator for our manufacturing client in Irvington, NJ. This role involves programming, setting up, and operating CNC milling machines to produce precision components according to detailed specifications. This person will interpret blueprints, write or edit G-code/CAM programs, calibrate tools, and perform quality inspections using measuring tools like micrometers, ensuring compliance with safety and design specifications. Monday-Friday, start time 6am Salary starting at $45/hour, commensurate with experience Key Responsibilities: • Ensure that machines and surrounding area obey Safety Standards, including usage of proper PPE., • Write and optimize CNC programs using CAD/CAM software or G-code to create precise tool paths, speeds, and feed rates., • Perform machine setup, including loading tools, setting tool offsets, and fixture alignment., • Use precision instruments (calipers, micrometers, indicators) to ensure parts meet blueprint specifications., • Perform routine maintenance on CNC machinery and troubleshoot issues promptly to minimize downtime., • Implement lean manufacturing principles to improve workflow efficiency and reduce waste. Requirements and Qualifications: • 4+ years experience programming and operating CNC milling machines in a manufacturing environment., • Proficient with measuring instruments, reading blueprints and interpreting drawings., • Proficient in Zero Homing and tool offset usage., • Proficient with basic math skills, • Experience with CAM software and G-code., • Bilingual a plus

Summary \n The Cannabis Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Cannabis Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. \n\n The Cannabis Machine Operator must be able to operate and oversee specialized automated cannabis packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated cannabis packaging equipment; therefore an understanding of mechanical and electrical systems is required. \n\n The Cannabis Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. \n\n The Cannabis Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday, 6:30am to 3:00pm. 32-40 hours per week. \n Job Duties \n\n • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day.\n, • Responsible for determining the work flow sequence to minimize changeovers. \n, • Stages product work flow so it is ready for processing after pre-shift briefing to techs.\n, • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns. \n, • Direct assembly or disassembly, and cleaning as required for shift start and end operations.\n, • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities.\n, • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc.\n, • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product.\n, • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste. \n, • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention. \n, • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible.\n, • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance.\n, • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO.\n, • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards \n, • Serve as a leader and champion of Bud's values in the Packaging operations\n, • Learn and operate software used for the company's Manufacturing Execution Systems\n\n\n Skills & Attributes \n\n • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences \n, • Strong organizational, critical thinking, presentation, and project management skills \n, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner \n, • Exceptional interpersonal and relationship building skills \n, • Advanced math and reading comprehension \n, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence \n, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce \n, • Understands and thrives in fast-paced, KPI-driven production environments \n, • Team player willing to assist in any function of packaging and labeling \n, • Ability to prioritize the business in all decision making \n\n\n Education & Experience \n\n • HS Diploma or 2+ years of related field experience\n, • 1+ years of experience in a leadership role\n, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry \n, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition \n, • Experience working with various complex manufacturing machines or electrical systems\n, • Proven track record of managing the scope of operations in a complex and highly regulated business environment \n, • Cannabis product knowledge strongly preferred \n, • Working knowledge of Metrc preferred\n\n\n Working Conditions/Physical Demands: \n\n • Able to stand or sit for extended periods of time. \n, • Able to lift up to 50 pounds\n, • Able to work a fully flexible schedule including nights and weekends if necessary\n, • Extensive use of hands, including repetitive movements\n\n Additional Requirements: \n\n • Must pass all required background checks\n, • Must have a reliable vehicle\n, • Must be and remain compliant with all legal or company regulations for working in the industry\n, • Must possess valid driver's license \n, • Must be a minimum of 21 years of age\n, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry\n\n Benefits: \n We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance, as well as participation in our Operator Incentive Plan, which rewards strong performance and operational excellence. \n #ENGHP

Job Description Dishwasher ROLE PURPOSE To provide Guests and Team Members with clean and sanitized utensils, plateware, glassware and equipment. KEY RESPONSIBILITIES & ACCOUNTABILITIES Provide Guests and Team Members with clean and sanitized utensils, plateware, glassware and equipment according to Ecosure standards. Ensure dishes and cookware are sanitized and available as needed. Maintain daily cleanliness and maintenance of dish machine. Clean and sanitize service area and kitchen throughout shift. Complete assigned prep work and beautification duties. Trouble-shoot dishwasher machine malfunctions. Keeps immediate supervisor promptly and fully informed of all problems or unusual matters of significance and takes prompt corrective action where necessary or suggests alternative courses of action which may be taken. Performs all duties and responsibilities in a timely and effective manner in accordance with established company policies to achieve the overall objectives of the position. Maintains a favorable working relationship with all other company Team Members to foster and promote a cooperative and harmonious working climate, which will be conducive to maximum Team Member morale, productivity, efficiency and effectiveness. At all times provides a favorable image of TGI Fridays to promote its aims and objectives and foster and enhance recognition and acceptance of all of its areas and endeavors. KEY DECISIONS Influences: Guest Experience Issues around cleanliness and sanitation MEASURES OF SUCCESS Ecosure results meet/exceed company standards Consistently fulfill the Key Responsibilities and Accountabilities above Guest satisfaction scores Cleanliness and sanitation QUALIFICATION REQUIREMENTS Must be able to perform multiple tasks, while maintaining required standards of operation, in daily activities. Must also be able to perform duties that ensure Guest satisfaction. Must follow handling and sanitation procedures and use extreme caution with utensils, plateware, glassware and equipment to avoid breakage. Must be able to frequently lift and carry up to 70 lbs., up to 20 times per shift: places these items on high shelves and in walk-in freezers Must be able to frequently bend and stoop Must be able to work frequently in a hot and damp environment Must be able to speak clearly to communicate orders to other cooks and expediter Must be able to hear cooks’ and W/W’s requests in the midst of loud background noise Must be able to stack, walk and move during entire shift Must be able to frequently immerse hands in water COMPETENCIES PASSION FOR THE GUEST – Actively contributes to fun, friendly and engaging service. Understands how their role impacts the Guest. Displays a caring attitude towards Guests. Contributes to the Guest experience through knowledge of job and products. Demonstrates a service attitude by providing support to those who are directly serving the Guest. Handles special requests in a responsive and positive way. Utilizes customer feedback to provide a better Guest experience. COMMUNICATION – Keeps the lines of communication positive, open and productive. Pays close attention to Guests' and coworkers’ special requests to ensure accuracy. Responds positively to conflict situations and works to find appropriate solutions. Keeps interaction positive and productive; avoids conveying negative messages. Shares information with others to raise awareness of potential needs and concerns. Listens carefully and attentively to others without interrupting. Asks thoughtful questions to ensure proper understanding of the message being conveyed. Contributes to pre-shift meetings by providing relevant updates and asking appropriate questions. PASSION & INITIATIVE – Keeps it fun and keeps up with the pace. Shows Guests and Team Members that (s)he genuinely enjoys the job. Displays passion, energy and pride in doing the job right. Works with a strong sense of urgency and drive; pushes for quick, yet accurate results. Focuses on the way (s)he approaches a task, not just the task itself. Takes independent action to improve existing systems and processes. Enthusiastically promotes the TGI Fridays brand and menu items. RELIABILITY & ACCOUNTABILITY – Works hard and delivers quality results. Arrives on time and ready to work dressed in proper dress code. Attends all required shift meetings and is prepared to contribute. Minimizes wastes and costs (e.g., maintains proper rotation of inventory). Responds to complaints about food quality issues by owning the situation and solving the problem quickly and properly. Uses good judgment and acts with integrity in all dealings; demonstrates consistency in words and actions. FLEXIBILITY & STRESS TOLERANCE – Knows that anything can and will happen and handles uncertainty in a calm, controlled manner. Addresses daily challenges and obstacles with confidence and a positive attitude. Easily adjusts to meet changing demands and new responsibilities. Prioritizes effectively and multitasks to ensure all tasks are completed by the end of the shift. Maintains an even-tempered demeanor even in stressful situations. Responds calmly to problems and controls emotional reactions. Handles him/herself in a professional manner at all times. TEAMWORK & COLLABORATION – Fuels an environment where everyone pitches in and gets along. Recognizes the importance of working together to accomplish goals. Actively promotes cooperation, respect, and acceptance of all Team Members. Establishes positive and supportive working relationships with all Team Members to maintain a productive environment. Takes on additional responsibilities to ensure proper coverage during rush periods. Reaches out to Team Members when necessary to ensure timely completion of all tasks. Takes advantage of opportunities to set an example for new or inexperienced Team Members

TGIF - 400 S Park Ave [Busser / Porter / Cleaner] As a Dishwasher at TGIF, you'll: Ensure dishes and cookware are sanitized and available as needed; Maintain daily cleanliness and maintenance of dish machine; Clean and sanitize service area and kitchen throughout shift; Complete assigned prep work a

Job Description Job Description: 3rd Shift Industrial Maintenance Technician Full-time Shift(s): MON - SUN 11:00pm - 7:00am Location: Hillside, New Jersey OVERVIEW: You will be responsible for doing maintenance and also being an operator who is responsible for the overall reliability/efficiency of assigned production line/equipment. REQUIRED POSITION QUALIFICATIONS: • Make repairs to production equipment as required or directed, • Complete all preventative maintenance as assigned, • Maintain a safe and orderly production equipment area, • Highly motivated, self-directed, • Learn and perform multiple tasks in a fast-paced environment, • Work independently as well as in a team environment, • Willingness to work a flexible schedule, • Perform operator preventative maintenance on production equipment, • All other duties as assigned EDUCATION / SKILLS / EXPERIENCE: • High school diploma, Associates or Trade School, • Minimum of 3-4 years of mechanical experience, electrical skills strongly desired as well, • Troubleshooting, • Preventative maintenance and repairs, • Extreme attention to detail, • Experience in machine operation PREFERRED POSITION QUALIFICATIONS: • Previous experience maintaining industrial equipment, • Mechanically inclined

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.comNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

Job Description Principal Duties/Responsibilities: · Performs mid to expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. · Independently performs maintenance as per industry standards. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Complies with 5S and housekeeping standards. · Drives and participates in CI activities - processes, results and cost savings. · Updates records and reviews CMMS history. · Troubleshoots and analyzes control systems to resolve software/ hardware and configuration problems. · Utilizes predictive maintenance technologies to collect equipment performance data. · Provides assistance to lower level technicians and leadership to small teams. Performs more advanced functions as a part of training and development. · Completes on-the-job and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 3 years of related experience in general industry; or 5 years of related experience in general industry or successful completion of the ATS Technician Progression Program. · Understands electrical, mechanical, fluid power and control systems. Can analyze problems and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate Pay: $34.58 - $44.23 Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. You should be proficient in: • Mechanical Troubleshooting Skills, • 120/208/240/480 Voltage Systems, • Electrical Troubleshooting, • Electrical Repair, • Pneumatics Troubleshooting, • Maintenance and Repair Skills, • Hydraulic Systems & Components, • Equipment Diagnostics & Troubleshooting, • Mechanical Systems & Component Repair

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match, • Tuition reimbursement (U.S Based Communities) *Enrollment in benefits varies by employee classification; anniversary reward amounts vary by location As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic/Vacforming/Thermo Forming machine set up to join our maintenance team and help keep our production running smoothly. Responsibilities: Troubleshoot, maintain, and repair plastic processing machinery and equipment Perform preventative maintenance on machines to ensure optimal performance Assist with equipment setup, changeovers, and calibration Maintain maintenance logs and records Ensure safety standards are followed at all times Requirements: Mechanical experience in an industrial or manufacturing setting Familiarity with plastic processing equipment is a plus Strong problem-solving skills Ability to work independently and as part of a team Must be reliable and safety-conscious

Job Description We are seeking for a Machine Operator, this is a temp to perm position. Training available. Responsibilities: • Troubleshoot and resolve issues in a timely fashion, • Load and unload equipment and materials, • Provide innovative solutions to improve plant efficiency, • Conduct routine preventive maintenance on the plant, • Log and record readings for equipment and procedures Qualifications: • Previous experience operating machines and mechanically incline., • Familiarity with plant tools and equipment, • Strong troubleshooting and critical thinking skills, • Ability to handle physical workload, • Ability to thrive in a fast-paced environmentCompany DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Job Title: Maintenance Technician Location: Linden, New Jersey Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • Perform Other Duties as AssignedQualifications, • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

This position is for graduates of an accredited school of Nursing working in a state that does not allow graduates to perform nursing duties until licensed. The specific job title used will be determined based on the state where the employee is employed. Functions as part of the hemodialysis health care team providing safe and effective dialysis therapy for patients under the direct supervision of a licensed nurse while working towards obtaining their nursing license. Employees hired into this position will be required to obtain their nursing license within 90 days of their hire date. Performs vascular access evaluation pre-treatment. Performs and records Pre and Post dialysis evaluation, weight and vital signs with initial identification. Performs vascular access cannulation and reports any difficulties in cannulation or unusual findings to nurse supervisor. Initiates dialysis treatment according to prescribed orders including blood flow (QB) and dialysate flow (QD). Evaluates intradialytic problems and provides intervention as prescribed by physician order or as directed. Monitors patients' response to dialysis therapy. Obtains vital signs prior to reinfusion; performs all relevant functions necessary for the discontinuation of treatment and documents appropriately. Evaluates patient prior to termination of venous access - standing & sitting blood pressure. Obtains hemostasis and applies appropriate dressings. Evaluates the patient prior to discharge. Documents information related to patient treatment including documentation in the patient health record. Reports any significant information and/or change in patient condition directly to the nurse supervisor. Performs and documents interventions for unusual patient status and document patients' response to intervention. Obtains all prescribed laboratory testing and prepares specimens for collection. Maintenance / Technical: Conducts all tasks necessary for preparation for dialysis treatment and documents where appropriate. Maintains environmental integrity and aesthetics - ensures all areas are safe and clean. Cleans and disinfects dialysis machine surface, chair, equipment, and surrounding area between treatments according to facility policy. Performs all required pretreatment dialysis machine set up and testing. Ensures that all blood spills are immediately cleaned with appropriate disinfectant according to facility policy. Prepares, organizes, and efficiently utilizes supplies and equipment to prevent waste. Clerical & Administrative: Enters all treatment data into the designated clinical application accurately and in a timely manner. Reviews health care record for completeness and ensures omitted entries are completed or corrected where appropriate. Prepares lab requisitions for prescribed or stat lab specimens according to laboratory destination. Collects, labels, appropriately prepares and stores lab samples according required laboratory specifications. Ensures collection of lab specimens by appropriate lab courier. As a condition of continued employment, you are required to obtain and maintain any required credentials or certifications necessary for your position in an active and valid status (including renewal of such credentials or certifications prior to any expiration date). In the event that your credential or certified status changes, you must notify your supervisor immediately. Capable of working in a challenging environment which requires the ability to handle demanding situations, multitasking, and remaining flexible to changing needs. Maintains regular and punctual attendance. Performs other related duties as assigned The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodations can be made. Work includes using a desk and personal computer as well as interaction with patients, facility staff and physicians. The position may require travel between assigned facilities and various locations within the community. Travel to regional, Business Unit and Corporate meetings may be required. The work environment is characteristic of a health care facility with air temperature control and moderate noise levels. May be exposed to infectious and contagious diseases/materials. The position provides direct patient care that regularly involves heavy lifting and moving of patients, and assisting with ambulation. Equipment aids and/or coworkers may provide assistance. This position requires frequent, prolonged periods of standing and the employee must be able to bend over. The employee may occasionally be required to push and/or pull equipment, exerting up to 15 pounds of force. The employee may be required to lift and to lower solutions on a frequent basis of up to 30 lbs., and on an occasional lift basis up to 40 lbs., as high as 5 feet. There is a two-person assist program and "material assist" devices for the heavier items. • None Education and required credentials: • Graduated from an accredited nursing program within the past 12 months Experience and required skills: • Required to obtain nursing license within 90 days of employment The rate of pay for this position will depend on the successful candidate's work location and qualifications, including relevant education, work experience, skills, and competencies. Hourly Rate: $29 - $48 Fresenius Medical Care North America maintains a drug-free workplace in accordance with applicable federal and state laws. EOE, disability/veterans

Five years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair.

Job Description General Description: Contact point for all shift team members with effective communication skills. Ability, to motivate, be proactive and ensure smooth operations with collaboration in effort to meet the department goals and objectives. Think logically and display technical aptitude to solve problems with creativity, diligence, and achievement. Produce machined parts by programming, setting up and operating a computer numerical control (CNC) machine. Maintaining equipment, adhering to quality and safety standards, saving, and updating parts programing, are some of the core responsibilities of a CNC operator. Reports to: Department Manager Responsibilities: • Programming, program selection, & program editing on CNC multi-axis turning centers., • Interpret engineering drawings to manufacture parts using CNC machinery, • Ability to make correct tool selection for parts manufacture, • Demonstrate ability to process work orders independently or with minimal instructions., • Perform preventative maintenance on machinery and equipment, • Identify quality, process, machinery, or equipment defects, • Delegate Operator tasks, set clear team performance expectations., • Oversee day-to-day shift operation, promoting a Safe work environment., • Improve the quality output of parts and work hands on with the quality department, • Implement continual training for teammates., • Troubleshoot equipment when there is a problem., • Other duties as assigned Minimum Educational Qualifications (If Applicable): • Not required. Minimum Previous Experience: • 7+ years working in a manufacturing environment/machine shop, • Proficiency with heavy machinery including lathe, drill press, grinding wheel, chop saw, and mill., • Ability to sequence or edit programs on lathe and CNC., • Read measuring tape, gauges, and calipers, • Must be able to lift and move up to 40 lbs. Minimum Additional Training (If Applicable): • Company’s Quality Management System., • ISO 9001:2015 awareness., • Other Skills:, • Hand-eye coordination., • Attention to detail.

Job Description REQUIREMENTS: • Knowledge of basic print production utilizing mid to high-volume B/W and color digital printing., • Experience in operating large format poster printers with a minimum understanding of rips, color correction, lamination, mounting and trimming., • Ability to select appropriate machines to run specific jobs., • Ability to adapt to work volume peaks with minimum direction Ability to ensure that quality and production standards are met., • Strong ability to understand and follow specifications of both electronic and manual print forms, • Monitor, evaluate and produce according to schedule all digital print and finishing work, including flyers, booklets, presentations and other material in a quality and timely manner., • Ability to take direction from client and customers on job requirements (including: supplies, due dates and quality checks)., • Must possess a strong attention to detail- checking for color accuracy, alignments, type breaks and quality of output and ability to make adjustments as necessary, • Monitor and oversee all print jobs for accuracy (performing various Quality control checks) based on client requirements., • Perform or oversee all machine maintenance., • Assist in generating reports measuring production volumes, meter reads and usage totals., • Monitor inventory of all paper, products and supplies., • Interface daily with various customers (either in person, telephone or email) on printing issues., • Deliver and pickup customer jobs, when necessary., • Coordinate internal deliveries and maintain accurate shipping logs., • Keeps client/manager informed of operational efficiencies and potential problems., • Able to set priorities; must be flexible to adapt to changes and multi-task., • Must demonstrate leadership qualities and high customer service skills., • Other duties as assigned by TMG management. Qualifications: • High school diploma or equivalent., • Must have experience in copy and finishing services., • Minimum 3 years print shop experience or equivalent, • Minimum 2 years customer service and office related experience., • Excellent customer service skills; must possess a "can do" attitude., • Computer knowledge with Microsoft Suite, Excel and Spreadsheets., • Graphic Design, proficiency in PITSTOP, ADOBE Pro, • Handle multiple projects at one time., • Ability to effectively work individually and in team environment., • Attention to detail., • Competency in performing multiple functional tasks., • Conduct Quarterly Business Reviews with Clients, • Assertive and resourceful; self-motivated; willing to ask questions and take initiative be able to communicate clearly., • Consistently demonstrates professional demeanor, appearance and attitude. Job Posted by ApplicantPro

Job Description Manufacturing Specialist – Woodworking & CNC Operations Newark, NJ Full-Time | Onsite Schedule: Monday–Thursday: 7:30 AM – 4:30 PM Friday: Half Day Salary Range: $100,000 - $150,000 Description / Position Overview This role owns the performance, efficiency, and consistency of CNC-driven woodworking operations on the manufacturing floor. The Manufacturing Specialist is responsible for improving processes, programming and optimizing CNC equipment, and ensuring production runs accurately with minimal downtime. This role exists to bring structure, standardization, and technical expertise to a high-volume environment where precision and efficiency directly impact output. This is a hands-on role working directly with machines, operators, and production teams to ensure work is done correctly, consistently, and at scale. Responsibilities Process Ownership & Improvement • Analyze product specifications and define efficient, repeatable production processes, • Standardize workflows across machines and production lines, • Identify inefficiencies and implement process improvements to increase throughput CNC Programming & Optimization • Program and optimize CNC machines to ensure accurate and efficient output, • Maintain and update machine libraries, materials, and hardware settings, • Troubleshoot machine and software issues to minimize downtime Production Support • Monitor production quality and make real-time adjustments as needed, • Support engineering, drafting, and production teams with technical expertise, • Ensure products are built accurately and consistently to specification Equipment Ownership • Take ownership of key machines including panel saws, edge banders, and related equipment, • Ensure machines are running efficiently and consistently, • Support preventive maintenance and continuous improvement initiatives Training & Standardization • Train operators on machine operation, best practices, and troubleshooting, • Build consistency across operators and shifts through structured processes, • Share knowledge and improve team capability across the floor Success in This Role • Processes are standardized, efficient, and consistently followed, • CNC machines run with minimal downtime and strong output quality, • Operators are trained, confident, and aligned on best practices, • Production accuracy improves with fewer errors and rework, • Workflow efficiency increases across machines and teams Requirements • Strong experience in woodworking and CNC-based manufacturing environments, • Experience programming and operating CNC machines, • Ability to read and interpret technical drawings and specifications, • Strong troubleshooting and problem-solving capability, • Hands-on approach with strong attention to detail, • Ability to work in a fast-paced production environment Must-Have Capabilities • Strong ownership mindset over machines, processes, and output, • Ability to identify issues and implement practical solutions quickly, • Strong technical understanding of CNC workflows and production processes, • Ability to train and develop operators with clear, structured guidance Nice-to-Haves • Experience with Cabinet Vision or similar software, • Exposure to multi-machine environments and cross-training, • Experience supporting process improvement or SOP development Final Invitation to Apply If you are a hands-on manufacturing operator who understands CNC, takes ownership of processes, and wants to improve how production runs day-to-day, we'd like to hear from you. If you have most of this experience and can step in and make an impact, we encourage you to apply. Email Resume: Joel@maiplacement.com Apply Online: https://jobs.crelate.com/portal/maiplacement/job/x56h7m75ckf6dsg4e337caf3co?crt=1776872966766 Refer a friend, get up to $1000!

Job Description We are looking for a Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Machine Operator Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionSolid Waste Transfer Station visit www.Lemcortransfer.com for more informationSolid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job Description We are seeking a skilled and experienced CNC Machinist to join our dynamic team. As a CNC Machinist, you will be responsible for setting up and operating computer numerical control (CNC) machines to produce high-quality precision parts. The ideal candidate should have a strong background in machining, be detail-oriented, and possess excellent problem-solving skills. This is a full-time position with opportunities for growth and advancement within our company. Responsibilities: • Set up and operate CNC machines to perform precision machining operations such as milling, turning, drilling, and grinding., • Study blueprints, sketches, drawings, manuals, or specifications to determine dimensions and tolerances of finished workpieces, sequence of operations, and setup requirements., • Select and install cutting tools, attachments, and accessories according to job requirements., • Load and unload workpieces and fixtures into the machine, ensuring proper alignment and secure clamping., • Monitor machine operations and make necessary adjustments to maintain quality and efficiency., • Inspect finished workpieces using precision measuring instruments to ensure conformance to specifications., • Troubleshoot and resolve issues that may arise during machining processes., • Perform routine maintenance on machines to ensure proper functioning and minimize downtime., • Collaborate with team members and engineers to optimize machining processes and improve overall productivity., • Adhere to safety guidelines and maintain a clean and organized work area.

Job Description Summary: A Medical Laboratory Technologist is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease. Responsible for operation of the laboratory. Mycology experience required. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Bachelor degree in Biological, Chemical, Physical science or equivalent · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job Description Plastipak Process Technicians maintain & operate equipment to manufacture a variety of plastic containers in a clean & safe work environment. Associates take pride in maintaining our high standards of quality products and our positive team culture. We Offer: • Work-Life Balance: 12-hour shifts & a standard rotating schedule with 12-14 days off & 2 long-weekends every month!, • Climate Controlled Facilities: We're warm in the winter & cool in the summer!, • Opportunity: Advance your skills & career as we look to promote from within!, • Benefit Packages: Options to select plans made to fit your family’s needs! As a Process Technician, You Will: • Operate blow molding production equipment in a safe manner, • Monitor production & make adjustments to equipment, as needed, • Perform a variety of tasks, such as inspect & remove plastic containers with visual defects or packaging products for distribution, • Grow your knowledge & skills through a wide-variety of training & on-the-job experiences To be a Process Technician, You’ll Need • Able to work 12 hour shift on a 3-2-2-3 schedule, • High School Diploma, GED or equivalent, • Able to use basic hand tools, such as wrenches, hammers, screwdrivers, etc., • Mechanical/Technical experience in a manufacturing setting, • Physical requirement includes ability to lift up to 50 pounds with or without a reasonable accommodation You should be proficient in: • Mechanical Troubleshooting Skills, • Maintenance and Repair Skills, • Machine Setups for Production Runs, • Plastic Extrusion Experience, • Injection Molding Experience, • Blow Molding Experience Machines & technologies you'll use: • Injection Molding Machine, • Extrusion Machine, • Blow Molding Machine

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Stationary Engineer Location: Linden NJ (on-site) Visa: USC/GC Only Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid drivers license

Job Description The Junior Mechanical Engineer will assist with equipment evaluation, process improvements, troubleshooting, and prototyping, while learning to take on increasing responsibility over time. This is a hands-on role that works closely with operations, maintenance, and production teams. Key Responsibilities:  Assist in evaluating and improving existing production equipment  Support the specification and implementation of new machines for manufacturing operations  Help select and maintain tooling for machining and production processes  Assist in optimizing machine parameters (cutting speeds, feed rates, cycle times, etc.)  Support efforts to improve production flow and line efficiency  Work with the Mechanical Engineer to troubleshoot equipment and process issues  Help train machine operators on proper machine use and best practices  Assist in prototyping and testing using tools such as 3D printers, lathes, and milling machines  Document processes, improvements, and standard work instructions Required Qualifications  Bachelor’s degree in Mechanical Engineering or related field (or in progress)  0–2 years of experience in a manufacturing or production environment (internships/co- ops acceptable)  Basic familiarity with industrial machinery (CNC routers, mills, saws, etc.)  Fundamental understanding of machining principles, tooling, feeds, and speeds  Strong willingness to learn and develop hands-on technical skills Company DescriptionRecruiting CompanyRecruiting Company

Job Description We are looking for a Welder - Diesel Mechanic - Machine Operator to join our team! You will be responsible for repairing various vehicles and equipment Responsibilities: • Repair Diesel Equipment, • Perform routine maintenance, • Use diagnostic tools to test vehicle components, • Perform quality inspections, • Machine Operator Qualifications: • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environmentCompany DescriptionSolid Waste Transfer Station visit www.Lemcortransfer.com for more informationSolid Waste Transfer Station visit www.Lemcortransfer.com for more information

Job Description We are seeking a Tool Maker Machinist to provide accurate tools and fixtures to support metal stamping presses. Responsibilities: • Operate machine tools to produce tooling to produce precision parts, • Build and maintain tooling, fixtures, and gages used in production, • Perform routine maintenance on machinery, • Calculate dimensions and tolerance using measuring instruments Qualifications: • Previous experience using manual machinery, i.e. lathe, knee mill, drill press, • Familiarity with heat treating of tooling, • Strong analytical and mathematical skills, • Strong attention to detailCompany DescriptionCustom metal stamper serving Aerospace, Industrial, Commercial and Military Customers. Providing high quality precision parts and assemblies since 1955.Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers.\r\nProviding high quality precision parts and assemblies since 1955.

Under minimal supervision, performs maintenance work on machine tools, plant equipment and buildings must have the ability to work from written instructions, including manuals, drawings, sketches, schematics and/or verbal instructions to perform general maintenance tasks including but not limited to

Under minimal supervision, performs maintenance work on machine tools, plant equipment and buildings must have the ability to work from written instructions, including manuals, drawings, sketches, schematics and/or verbal instructions to perform general maintenance tasks including but not limited to

Job Description World Class Medicine. Purpose-Driven Partnership. Veritas Veterinary Partners offer exciting career opportunities in state-of-the-art facilities across the U.S. Our hospitals, open 24/7/365 and staffed by board-certified specialists, create a collaborative environment where you can work alongside like-minded, caring professionals. If you're passionate about veterinary medicine, this is your chance to thrive in a dynamic, high-quality setting. At Veritas Veterinary Partners, our mission is to build a network of trust and opportunity for veterinary professionals nationwide. We specialize in supporting Specialty and Emergency care hospitals, aligning with your unique goals and medical standards. Veritas, founded by Thomas Scavelli, DVM, DACVS, is dedicated to recruiting top-tier talent and fostering collaboration within our community. With a focus on exceptional care, we bring together highly trained veterinarians, technicians, and teammates committed to our patients' well-being. We believe in Truth in Medicine and Trust in Partnerships, ensuring we always provide the highest standard of care. Come join us and make a meaningful impact on the community you serve. Garden State Veterinary Services in Woodbridge, NJ is excited to announce we are looking for instrument technicians to join their specialty/emergency hospital. About GSVServices: We are a multispecialty practice with boarded specialists in cardiology, internal medicine, surgery, radiology, and critical care. Our clients and patients also have access to ophthalmology, oncology, radiation oncology, dermatology, and radioactive iodine treatment via our affiliated practice in Eatontown, NJ. Why GSVServices: We are not your typical veterinary hospital! We know the winning recipe to maintain the care and compassion that our patients depend upon us for, is to create a safe and supportive space for you to put your skills to use, develop new skills, and be a part of our highly collaborative, fun, and friendly team! We are proud of our company culture and positive staff engagement within a fast-paced, learning environment; and our associate employment longevity is proof of our commitment to take care of one another, and provide the highest standard of care to the patients we serve. Instrument Technicians at GSVS – Woodbridge work alongside veterinary technicians, emergency doctors, and veterinary specialists, ensuring that all instruments used for surgical procedures are clean and sterilized, operating rooms and surgery treatment area are clean and ready for use. Your role specifically ensures the safety and efficiency of surgical operations. On any given day, you can expect to do the following as an Instrument Technician: • Monitor surgery schedule to ensure all necessary equipment will be available to the surgery team that day., • Prepare OR for surgery; select appropriate packs, instruments, and materials for the procedure being performed, • Take patients to and from surgery as requested, • Clean surgical instruments after surgery, to include use of the ultrasonic cleaner and instrument milk, • Wrap surgical packs, extra instruments, and other materials for sterilization, • Use of the autoclave and gas sterilization machine and perform all routine maintenance (certification required for gas sterilizer, will provide training), • Inform supervisor of any broken or damaged equipment, • Take routine inventory of stock, • Maintain pack, instrument, and equipment lists, • Restock drawers, shelves, surgery and refill alcohol and scrub container, • Clean after any procedures in the Radiology area, keep protective gear hung up and clean, • General cleaning, sanitizing, trash removal, • Check to see that all animals have food and water (unless medically withheld), and are clean, • Clean cages and runs during the day, • Assist other areas of the hospital, as needed. About you: • At least 1 year of experience in a specialty veterinary hospital required, • Team oriented, • Motivated self-starter, • Detail oriented, • Sound problem solving abilities, • Ability to communicate with clients and all members of the veterinary team, • Positive outlook, • Excellent organizational skills, • Honesty, integrity, and a desire to have fun! Schedule: Tuesday – Saturday, 9am – 7pm Benefits: • Health, dental, and vision insurance, with HSA option- some plans paid 100%, • Maternity/Paternity leave, • Retirement Plan – 401K with employer match, • Employee Referral Bonus, • Paid Time off, • Mental health support with Talkspace, • Uniforms provided, • Full Time credentialed technicians eligible for Sign On Bonus, • Pet discounts for medical care Garden State Veterinary Services is located at 1200 Route 9, Woodbridge NJ 07095 Veritas Veterinary Partners is an equal opportunity employer. In accordance with the requirements of all applicable federal, state and local laws, we welcome and encourage diversity in the workplace regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Applicants must be authorized to work in the U.S. All current positions require the ability to speak, read, and write English proficiently. Additional fluency in other languages is preferred but not required. For CA applicants please visit our Privacy Policy

Job Description At Autoland Toyota Chrysler Jeep Dodge Ram, we are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. If you have an interest in automotive and a desire to develop a career in the industry, apply today! Are you experienced with basic level automotive maintenance and frustrated or bored with your current workplace? Do you want to enjoy a productive, safe, and professional environment where you can grow your career and feel good about where you work? We're looking for Oil Change/Entry Level Automotive Technicians to join our team. If this sounds like you, then come and see what we have to offer! What We Offer • Medical, Dental & Vision Insurance, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Paid Training, • Employee vehicle purchase plans, • Family owned and operated, • Health and wellness, • Discounts on products and services, • Air-conditioned shop, • State-of-the-art facility and cutting edge technology, • Shop equipped with the newest technology and equipment, • Uniforms provided, • Work environment OSHA certified to current Air Quality Standards, • Highly productive shop, • Career advancement opportunities, promote from within, • Continued education, manufacturer hands on and web based training, • Clean and professional work environment, • Competitive wages Responsibilities • Test to check whether systems and components are secure and working properly, • Isolate the systems or components that might have caused the problem, • Drive the vehicle for testing purposes, • Maintain efficiency and accuracy in diagnosing as well as repairing vehicles, • Repair or replace worn parts ahead of the vehicle’s breakdown or damage, • Use power tools, machine tools, and common hand tools to perform various tasks Requirements • Knowledge of automobiles, • Comfortable operating electronic diagnostic equipment, • High school diploma or GED; Technical degree preferred, • Minimum of 1 year in service department, • Ability to lift 50 pounds and work on your feet for extended periods of time, • Positive, friendly attitude We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third-generation, family-owned business dedicated to helping manufacturers improve productivity and stay competitive. About this Role: We are hiring Field Service Technicians to support and service advanced industrial equipment, including CNC machine tools. No prior CNC experience is required. We actively hire and train experienced technicians from related industries such as: • Commercial HVAC, • Industrial electrical or low voltage electrical, • Diesel / heavy equipment, • Field service / industrial maintenance, • Aircraft mechanics If you have strong troubleshooting skills and experience working on complex mechanical and electrical systems, we will train you to become an expert in CNC equipment. What makes someone successful in this role: This role is ideal for someone who: • Enjoys diagnosing and solving complex equipment issues, • Is comfortable working independently in the field, • Has experience troubleshooting electrical and mechanical systems, • Can work through problems with or without step by step instructions, • Takes pride in learning and expanding their skills What you will do in this role: • Diagnose and repair industrial equipment including CNC machines at customer sites, • Troubleshoot electrical systems, motors, drives, encoders, and control systems, • Perform mechanical work including alignments, assemblies, and repairs, • Use tools such as multimeters and diagnostic equipment to identify issues, • Use precision measuring tools and fixtures to check machine alignments, • Interpret electrical schematics, mechanical drawings, and technical documents, • Install, commission, and maintain equipment, • Provide customer support and operator guidance when needed, • Work independently while collaborating with a team when needed, • Provide clear communication verbally and in service reports given to the customer What we are looking for: We are intentionally open to candidates from multiple technical backgrounds. Strong candidates may have experience in: • HVAC systems and controls, • Industrial or commercial electrical work, • Diesel or heavy equipment repair, • Manufacturing maintenance or field service Preferred skills (not all required): • Electrical troubleshooting (motors, drives, transformers), • Use of multimeters and electrical testing tools, • Hydraulics and pneumatics, • Control systems or PLC exposure, • Mechanical repair and alignment CNC experience is a plus, and is desirable, but is not required. Training & Growth: We invest heavily in training and development. • Hands-on field training with experienced technicians, • Classroom and manufacturer training programs, • Opportunity to become a highly skilled CNC service expert, • Clear path to increased responsibility and compensation Travel & Work Environment: • Daily travel within ~2 hours of home, • Occasional overnight travel, • Work in manufacturing environments with industrial equipment Why This Role Stands Out: • Higher earning potential than many skilled trades roles, • Significant technical growth into advanced automation and CNC systems, • Cleaner work environment compared to many mechanical trades, • Exposure to a wide variety of equipment and problem-solving scenarios What We Value: • Strong work ethic and reliability, • Willingness to learn and accept coaching, • Professionalism with customers, • Ability to work independently and solve problems, • Team-oriented mindset *The duties listed in this job description are intended only as illustration of the various types of work that may be performed.The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. • What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises., • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects., • Ability to sit and stand for prolonged period of times., • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees., • Ability to frequently use hands and arms., • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus., • Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated assafety-sensitivedue to the nature of the work performed. Employees in these roles may also be expected to: • Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment., • Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas., • Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work., • Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. You should be proficient in: • Heavy Equipment Repair, • Mechanical Troubleshooting Skills, • 120/208/240/480 Voltage Systems, • CNC Machine Repair, • CNC Machine Installation, • Diesel Engine Systems, • Electrical Installation, • Electrical Troubleshooting, • Electrical Repair, • Light Vehicle Diesel Engines, • HVAC Service & Installation, • HVAC Maintenance, • HVAC Troubleshooting, • HVAC Repair, • High Voltage Systems, • Maintenance and Repair Skills, • Industrial Electrical Experience, • Industrial Electrical Systems, • Diesel & Heavy Equipment Systems, • Electrical Systems & Diagnostics (Heavy Equipment), • Mechanical Systems & Component Repair, • Lockout/Tagout (LOTO), • Electrical Panel Installation, • Spindle Maintenance & Repair, • Electrical Schematic Reading, • Low Voltage Cabling Installation, • Equipment Repair & Maintenance, • Equipment Installation, • Troubleshooting CNC Machines Machines & technologies you'll use: • CNC Mill (3-4 axis VMC) (Fanuc, Bridgeport, Mazak, ProtoTRAK, Haas, Okuma, Doosan, Kitamura, Makino, Brother, Hurco, Dmg Mori Seiki, Hwachon), • Diesel Engine (Detroit Diesel, Cummins, PACCAR), • HVAC Systems (Frick, Evapco), • Refrigeration/Cooling Systems (Frick, Evapco), • EDM Machine (Sinker) (Fanuc, Mitsubishi, Makino, Sodick, Agie Charmilles, Accutex), • Diesel Vehicles (Ford, Jeep, Toyota, Honda, Kia), • Injection Molding Machine (Toyo, Milacron, Toshiba, Niigata, Arburg, Van Dorn, Engel, Husky, Nissei, Sodick, Sumitomo, Haitian, Bole), • Peterbilt Truck (Peterbilt, Kenworth, Freightliner, Mack), • Industrial Controls (Allen Bradley, Mitsubishi, ABB, Omron, Siemens, Schneider Electric), • Power Tools (DeWalt, Makita, Milwaukee, Bosch, Ryobi, Black+Decker, Hilti), • Tractor-Trailer (Peterbilt, Kenworth, Freightliner, International, Volvo Trucks, Western Star), • CNC Lathe (2-4 axis) (Mazak, Haas, Okuma, Doosan, Takisawa, Dmg Mori Seiki, Samsung, Murata, Fuji, Nakamura, Hyundai - Wia, Hwachon), • CNC Waterjet (Mitsubishi, Flow, Omax, Kmt, Wardjet, Jet-Edge, Cms), • CNC Router, • CNC Swiss Lathe (Star, Citizen, Tsugami, Index, Eurotech, Tornos, Ganesh, Hanwha, Yama-Seiki, Nomura), • Variable Frequency Drives (VFD), • CNC Wire Bending Machine, • CNC Plasma Cutter (Torchmate, Alltra, Messer, Arclight, Plasmacam, Shopsabre, Vicon, Burlington), • Die Cast Machine (Cold Chamber), • EDM Drilling Machine, • CNC Mill (5+ axis VMC) (Fanuc, Mitsubishi, Mazak, Haas, Okuma, Kitamura, Matsuura, Mikron, Dmg Mori Seiki, Hwachon), • CNC Lathe (5+ axis) (Mazak, Okuma, Doosan, Index, Eurotech, Miyano, Dmg Mori Seiki, Samsung, Nakamura, Hwachon), • Universal Machining Center (5 axis UMC) (Okuma, Matsuura, Dmg Mori Seiki), • Universal Machining Center (3-4 axis) (Okuma, Toshiba, Dmg Mori Seiki, Maho), • Die Cast Machine (Hot Chamber), • Calipers and Micrometers, • Programmable Logic Controller (PLC) (Fanuc, Allen Bradley, Mitsubishi, Omron, Siemens, Panasonic, Schneider Electric, Beckoff, Modicon, B&R Industrial Automation, Sigmatek), • Horizontal Machining Center (3-4 axis) (Haas, Okuma, Doosan, Makino, Toyoda, Niigata, Dmg Mori Seiki, Kiwa, Enshu), • Horizontal Machining Center (5+ axis) (Mazak, Okuma, Toyoda), • Vertical Lathe (Okuma, Toshiba, Toyoda, Hwacheon), • HMI (Sigmatek), • Conveyor Systems (Swisslog, Dematic, Körber, Hytrol, Pentanova, Alba, Wulftec, Riantics), • Servo Motors, • Cylindrical Grinder Machine, • ID Grinder Machine

Job Description Synagro partners with stakeholders to clean our water, protect our environment and serve our communities by generating worth from what others consider waste. We work to protect the health of our water, our Earth and those who depend on them now and in the future. • The employee will be eligible for company-paid benefits, including competitive pay comprehensive health benefits. JOB SUMMARY General Labor duties include truck scaling, site cleaning, light maintenance, able to operate front end loader. Adhere to all applicable regulations to provide safe, reliable, and cost-effective operation of the site to meet processing (contact), permit, and other applicable requirements. ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES 1. Perform equipment maintenance according to abilities, as required to keep the process running. Contact the on-call mechanic when necessary, 2. Assist with the processing of material in a safe, effective timely manner for hauling to appropriate location and in compliance with all company, federal, state and local regulation/policies, 3. Communicate and inform supervisor of all major problems, or if for any reason the process is shut down for more than 1 hour, 4. Prepare and complete equipment checks at the start of every shift and complete all necessary forms, 5. Perform any general work or other assignments necessary to ensure the safe, clean, and efficient operation of the site to include sweeping, shoveling, and other housekeeping activities, 6. Enforce and maintain standard safety procedures and maintain a clean work area at all times, 7. Participate and complete training programs within the time frame allotted KNOWLEDGE/SKILLS/ABILITIES 1. Ability to establish and maintain effective working relationships with employees, other agencies and the public, 2. Communication skills – verbal and written, 3. Ability to perform basic math, 4. Ability to work varying shifts, overtime hours and/or weekend duties, 5. Ability to follow instructions, 6. Thorough knowledge and understanding of occupational hazards connected with machine shop and general site practices with emphasis on the necessity of safety policy compliance, 7. Ability to receive, comprehend and utilize required training from OSHA and Company including but not limited to the following: First aid and CPR, Hazcom, Hearing conservation, Confined space entry and rescue , Lock out/Tag out EDUCATION/EXPERIENCES 1. Minimum High School Diploma or equivalent (GED) with strong mechanical aptitude required WORKING CONDITIONS/PHYSICAL REQUIREMENTS 1. Talking, Hearing, Seeing, Walking, Sitting, Standing, Pushing, Pulling, and Lifting up to 100 lbs, 2. The worker is subject to both environmental conditions: Activities occur inside and out, 3. The worker is subject to noise: There is sufficient noise to cause worker to shout in order to be heard above the ambient noise level., 4. The worker is subject to hazards: Includes a variety of physical conditions such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to bio-solids. Starting Salary: $18.79 per hour The above statements are intended to describe the general nature and level of work being performed by people assigned to this position. They are not intended to be an exhaustive list of all essential job functions, knowledge, skills, abilities, efforts, and physical or working conditions associated with a position. AA/EOE/M/F/D/V We thank all individuals for their interest in Synagro however only those selected for interviews will be contacted.

Job Description Position Summary OPEX Corporation is currently looking for a full time Field Service Technician. The worker will have a high exposure level to customer service as they will be responsible for visiting our current clients to help solve their technical issues. Responsibilities • This position is responsible for the day to day maintenance, troubleshooting and repair of mail opening, document scanning and/or material handling equipment, • Installing and setting up new equipment, • Interact with the customer to determine the problem, • Completing field service reports, • Keeping the customer informed as repairs are made and answer any question that may arise., • Interact with management as well as other personnel to analyze and correct any equipment performance issues., • Completing and submitting weekly online timecards and expense report Qualifications • Associate degree in Electronics and/or equivalent hands-on job experience., • Must have excellent customer service skills., • Possessing a driver’s license, insurance and a reliable vehicle., • Ability to lift at least 25 pounds independently., • Ability to maneuver a job site, including small spaces in around our equipment., • Valid Driver’s License and vehicle for daily use. Physical/Work Environment • Due to our large variety of client’s worker could potentially conduct work in an office or warehouse environment, • Ability to work well as part of team as well as alone., • Commuting for an extended period throughout duration of shift, • Must have the ability to lift heavy machine parts while on duty, • Ability to maneuver a job site, including small spaces in around our equipment, • Squatting, bending, kneeling, reaching overhead, reaching forward will occur while on the job Benefits: • Full medical, dental and vision with low employee contribution rates, • Paid holidays, vacation and personal days, • 401k with matching and profit sharing, • Basic life insurance, short term and long-term disability, • Tuition reimbursement Company Overview OPEX Corporation is more than a manufacturer of machines. We continuously reimagine technology to power the future for our customers. With an innovative approach, we engineer unique automated solutions that support our customers so they can solve the most pressing business challenges for both today and tomorrow. Our scalable Warehouse, Document, and Mail Automation solutions improve workflow, accelerate change, and drive efficiencies in infrastructure. We are a family-owned business and operated organization with more than 1200 committed employees who innovate, manufacture, install, and service products that are helping transform industry every day. We listen to our customers, respect each other, and work together to help reimagine the future through automated solutions. At OPEX, we are Next Generation Automation. Benefits: Benefits include, but are not limited to: · Full medical, dental and vision with low employee contribution rates · Paid holidays and PTO allowance · 401k with matching and profit sharing · Basic life insurance, short term and long-term disability · Tuition reimbursement available OPEX Corporation is an Equal Opportunity/Affirmative Action Employer, without regard to race, color, religion, sex, national origin, age, disability, and protected veteran status. Company DescriptionOPEX Corporation is a recognized global technology leader in high-speed mailroom automation, document imaging, and warehouse automation equipment.OPEX Corporation is a recognized global technology leader in high-speed mailroom automation, document imaging, and warehouse automation equipment.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Demonstrating a willingness to help others and be a team member Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. Provide voice of Customer feedback. Through service and Customer relationships, build brand dedication. Conduct travel and work in a safe manner, constantly learning new technology and soft skills. Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: Proficient verbal and written communication and Customer relation skills. Able to interact and effectively communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and able to deal with change, delays, or general work-related issues. Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. Basic mechanical and logical solving skills are a must. Rational decision making and problem-solving skills. Work Environment Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1440B, Newark NJ

Job Description Triad Service Center is seeking a qualified Field Technician for service and repair of light industrial equipment in the Elizabeth, NJ area. Equipment that is commonly worked on are floor scrubbers, sweepers, handicapped carts, checkout lanes, paint shakers and other commercial customer equipment found in large retail / industrial locations. Technicians will also install, and service grease containment units used in conjunction with deep fryers. This position would utilize a company vehicle regionally and therefore require a valid, good standing driver’s license. The position would be primarily Monday-Friday, averaging 40 hours a week. Vehicle, laptop, cell phone, PAID TRAINING provided. Starting Pay Range: $20-$27. Our Technicians Typical Duties, Tasks, and Responsibilities: • Have Strong mechanical aptitude with the ability to diagnose, repair and complete both service calls and scheduled PMs on light industrial equipment is essential for our mechanics., • Successfully provide customer service by performing on-location preventative maintenance and repairs on customer equipment by performing job duties., • Visually inspects, tests, and listens to machines and equipment to locate causes of malfunctions. As well as dismantles machine parts to detect wear, misalignment, or other problems., • Installs new or repaired parts; clean and lubricates shafts, bearings, gears, belts, and other parts of machinery., • Staying organized by scheduling repairs and PM’s in similar locations on the same day, as time and location permits. Record keeping and reporting of work orders, parts, supplies ordering, and a daily agenda., • Submits daily, work orders, daily agenda/timecards, parts orders, and all required paperwork. Treats company equipment (i.e. vehicle, tools, phone, tablet, credit card, and parts) as if they were his/her own and follows PM’s guidelines on company provided vehicle. Extra • Travel can be up to an average of 300 miles per day, • The associate must regularly lift and/or move up to 10 to 50 pounds and frequently lift and/or move up to 100 pounds., • Frequent exposure to moving mechanical parts, risk of electrical shock, fumes or airborne particles, and toxic or caustic chemicals., • Typically, Monday through Friday. Weekends and after hour work is possible provided customer is willing to pay emergency rates. On call status ends at 11 am EST on weekends and holidays, • Safety and Security – Observes safety and security procedures; reports potentially unsafe conditions; uses equipment and materials properly, • Dependability - Excellent attendance. Responds to service request in a timely manner. Follows instructions, responds to management direction. Takes responsibility for own actions. Maintain a valid driver’s license and safe driving skills. Must, always meet state and federal regulations Our Competitive Fulltime Benefit Package Starts Day One And Includes: • Medical, Dental, and Vision Coverage, • Flexible Spending Account – Medical and Dependent Care, • 401K Plan with Company Match, • Company Paid Life Insurance & Voluntary Life Insurance Options, • Company Paid Short-Term Disability Benefits & Voluntary Long-Term Disability Benefits, • Paid Holidays and Paid Time Off, • Wellness Resources and More! As this is a mobile position, our Field Service Mechanic / Technician can be based out of many cities around the Elizabeth NJ area. Find out more: www.triadservice.com Powered by JazzHR ghOF4vx4rs

Plastipak - - Responsibilities: Operate propane forklift to transport raw materials and finished goods between the warehouse and production areas; Use RF scanning device to scan goods; Perform Cycle Counts & Inventory Audits using SAP; Track & log inventory activity using Excel spreadsheets; Load f

Koch - - Responsibilities: Safely operate a sit-down forklift to load and unload trailers; Ensure accurate record keeping for all inbound and outbound shipments; Work collaboratively with other team members; Maintain a safe work environment by removing debris from warehouse areas; Perform tasks inv

Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns. Tools: Possession of basic tools

Abacus Corporation - - Responsibilities: Operate sit-down, stand-up, and/or reach forklifts to move product throughout the facility; Load and unload trailers safely and efficiently; Pick, stage, and put away inventory using RF scanners or warehouse management systems; Perform inventory checks and v

ABF Freight - - Responsibilities: Load and unload trailers for the purpose of transporting a wide variety of cargo; Move cargo, drive a forklift or use a pallet jack or other freight handling equipment; Prepare wide varieties of freight for transit; Complete all required paperwork; Effectively oper

URGENT HIRE - PART TIME Facility Maintenance Technician ABCO Maintenance looking to immediately hire an experienced Handyman for work across the Philadelphia, PA region (PA side & NJ side). Commercial Maintenance Technician - Part Time. Respond promptly to urgent maintenance and service requests.

Responsibilities: Operate an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand-stacks product from partial pallets onto full pallets of product.

Pactiv Evergreen - - Responsibilities: Operate bag machinery to produce high quality bags; Check bags for quality defects and complete paperwork; Change rolls and thread paper through machine; Monitor and adjust machine speeds / start / stop / jog; Submit daily production reports and meet safety, q