Trabajos machine maintenance en Plainfield, New JerseyCrear alertas

Job Description Summary The Cannabis Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Cannabis Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. The Cannabis Machine Operator must be able to operate and oversee specialized automated cannabis packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated cannabis packaging equipment; therefore an understanding of mechanical and electrical systems is required. The Cannabis Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. The Cannabis Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday, 6:30am to 3:00pm. 32-40 hours per week. Job Duties • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day., • Responsible for determining the work flow sequence to minimize changeovers., • Stages product work flow so it is ready for processing after pre-shift briefing to techs., • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns., • Direct assembly or disassembly, and cleaning as required for shift start and end operations., • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities., • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc., • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product., • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste., • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention., • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible., • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance., • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO., • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards, • Serve as a leader and champion of Bud's values in the Packaging operations, • Learn and operate software used for the company's Manufacturing Execution Systems Skills & Attributes • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences, • Strong organizational, critical thinking, presentation, and project management skills, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner, • Exceptional interpersonal and relationship building skills, • Advanced math and reading comprehension, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce, • Understands and thrives in fast-paced, KPI-driven production environments, • Team player willing to assist in any function of packaging and labeling, • Ability to prioritize the business in all decision making Education & Experience • HS Diploma or 2+ years of related field experience, • 1+ years of experience in a leadership role, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition, • Experience working with various complex manufacturing machines or electrical systems, • Proven track record of managing the scope of operations in a complex and highly regulated business environment, • Cannabis product knowledge strongly preferred, • Working knowledge of Metrc preferred Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Able to work a fully flexible schedule including nights and weekends if necessary, • Extensive use of hands, including repetitive movements Additional Requirements: • Must pass all required background checks, • Must have a reliable vehicle, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must possess valid driver's license, • Must be a minimum of 21 years of age, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry Benefits: We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance, as well as participation in our Operator Incentive Plan, which rewards strong performance and operational excellence. #ENGHP

Job Description While we may not have an immediate opening for this role, we welcome your interest and can contact you when a job is available. Hours/Shift: • Hours/Shift: 1st Shift from 6:00am – 2:30pm, • Hours/Shift: 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As a Machine Operator, you will perform skilled work in the setup, operation, basic maintenance and repair of manufacturing and/or packaging equipment to safely and effectively produce Temperature Control Packaging and related goods as per quality policy and manufacturing Procedures. • Setup and operate manufacturing and/or packaging equipment., • Load and feed machinery with specified raw materials and parts., • Perform basic repairs and maintenance as needed during production hours and coordinates with Maintenance Mechanic to perform advanced troubleshooting and preventive maintenance., • Refer to work order package and procedural instructions for each assignment before commencing work., • Assure all work assigned is performed in accordance with specifications, instructions, and requirements., • Assist in the performance of a variety of manual labor related to production including but not limited to handling, repeated handling, push, pull, lift, assembly, loading and unloading, packing, and palletization of goods., • Perform assignments in accordance with established safety policies and procedures., • Perform any specified quality assurance checks designated for each assignment adhering to quality policies., • Record specified production information thoroughly and accurately in work order package., • Meet production standards within a reasonable time depending on the degree of difficulty of the designated assignment., • Provide guidance to other individuals on the line, of next steps in the operating line as needed. WHAT YOU NEED TO SUCCEED (Qualifications): • High School Diploma or GED equivalent desired, • Bilingual (English & Spanish), • 1+ years’ experience in a manufacturing environment, • Ability to read and understand product specifications, • Forklift experience., • Ability to lift 50-75 lbs., • Ability to perform basic mathematical operations., • Ability to bend, reach, kneel, and stand for extended period of time., • Mechanically inclined. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: We strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is our policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job DescriptionWe're looking for entrepreneurial minded people to manage and operate a Scream Truck! We provide the infrastructure and the truck, you become your own boss (a "Scream Truck Pro"), managing the daily operations of a state-of-the art, tech forward food truck. If you've been looking to start and operate your own business, but don't want to take on the risk, this role is for you! Minimum earning potential is $60,000/year, but we offer multiple commission and rev share opportunities to reach $80,000+/year. This opportunity is not easy, but it is REALLY fun and rewarding! What feels better than being a part of a community and doing something that makes people happy? The Scream Truck Pro is responsible for managing all daily operations for a single truck. This includes prepping the truck (cleaning and stocking), preparing premium, aesthetically pleasing ice cream treats, and delivering the Scream Truck experience to excited customers. You will also be responsible for reviewing and meeting revenue goals, training and supervising other operators ("co-ops") for your truck, following strict food safety and driver safety standards,A "Scream Truck Pro" is the customer facing leader of the brand and must ensure exceptional service standards are consistently met. SCHEDULE • Five (5) days per week (typically, but not limited to Wednesday-Sunday) year-round operating a Scream Truck vehicle, • Typical operating hours are 1:00PM-10:00PM, but can vary based on the season or day of the week, • One FULL weekend off per month between May and August, • One weekend day off per month OR one FULL weekend off every other month between September AprilCOMPENSATION+ Annual base salary of $60,000 paid weekly ($48,000 base + $12,000 guaranteed gratuity)+ 10%-15% commission on events you sell to new clients anywhere in our service area+ Very achievable 10% rev share bonus for all revenue earned above your annual revenue goal+ Paid vacation/PTO+ Company subsidized medical/dental/vision benefits (Optional)+ Phone Stipend RESPONSIBILTIES • Service customers via reserved routes, private events, “pop-up” events, corporate events, and community events within the assigned territory, • Stocking and cleaning the truck for each day’s operations, • Training and evaluating full and part-time “Co-Op(s)” that will assist the Scream Truck Pro complete all duties, • Regular meeting with Regional Manager to set a monthly operating schedule and review revenue goals, • Weekly deep clean of your ice cream machine to ensure compliance with health and safety regulations, • Monitoring weather conditions to ensure the truck operates on the most opportune days, • Alongside the Regional Manager, managing truck and equipment repairs & maintenance, • Review monthly financial information such as sales and costs versus budget, • Document and discuss current co-op staff performance and staffing needs or changes., • Expectation to work some holidays (Closed Thanksgiving + Christmas Day), • Executing special routes or event experiences (Santa on the truck, Free Scream for Mom on Mother's Day, New Year's Eve events, etc.)PERKS, • Be your own boss!, • Work mobile and OUTDOORS (not stuck behind a desk), • Free Scream Truck Treats + Free Annual Event + Discounted Events, • Be a part of an exciting startup that is just starting to expand nationally, • Upbeat and FRIENDLY Staff (find your new BFF), • Deliver to HAPPY customers (it makes us happy to see them so excited for Scream Truck)REQUIRED QUALIFICATIONS, • Squeaky clean driving record and ability to safely drive a large vehicle (think UPS or FEDEX truck). NO CDL required, we train you!, • Over 21 years of age (due to driving/insurance restrictions), • Upbeat, friendly, and outgoing personality, eager to happily serve customers, • Available to work with a flexible schedule including weekends and holidays, • Strong work ethic with a “CAN-DO” attitude, • Excellent communication skills, • Tech savvyPREFERRED QUALIFICATIONS, • Food service experience, • Comfortable driving a truck or large vehiclePHYSICAL REQUIREMENTS, • Ability to alternate between sitting and standing frequently during shift, • Ability to travel through a cabin of approximately 2.5 feet wide efficiently, • Ability to operate equipment such as an ice cream machine, shake blender and point of sale, • Ability to reach above head for items on shelves, • Ability to occasionally lift up to 25lbsABOUT SCREAM TRUCKOur mission is simple. We give people something to look forward to.Click here for a 360 view of truck!Scream Truck is the world's first fleet of experiential, personalized food trucks! We operate a fleet of 15+ ice cream trucks in New Jersey and recently started franchising. Scream Truck was founded in 2020 with a team of 3 (we were just an idea pre-covid) and quickly developed an exceptional reputation for delivering happiness. Yes, we serve delicious ice cream and other treats, but there's so much more to the experience Scream Truck delivers. We've developed proprietary software to help us efficiently navigate through various neighborhoods and maintain a profitable and predictable business model. WHAT WE DOReserved Routes - home delivery service. We text customers when we're coming to their neighborhood!Private Events - Private events are booked online in advance with a specific date, time and number of people. Personalized message on our LED screens and custom menus for birthday parties, showers, mitzvahs, corporate teams and more!Community Pop Ups - Pay-per-item public events for big or small group (festivals, school fundraisers, office buildings). HOW IT WORKSSign up for Reserved Routes at www.screamtruck.com - we'll text you whenever we service your neighborhood! Simply reply Y to request a stop. Pre-order, pre-pay and voila! Book events instantly online at www.screamtruck.com

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Facility MRF Control Panel Operator at Newark MRF facility plays a vital role in the recycling process by operating various recycling machines inside MRF facility. This position emphasizes attention to detail, and a commitment to safety while working in a dynamic environment. The role is designed for individuals who are eager to learn and grow within the recycling industry, contributing to the company's sustainability efforts Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Understanding of MRF Facility operations and Facility material flow., • Understanding and ability to operate MRF equipment control panels, • Communication via 2-way radio to other MRF control panel operators, supervisors and operators., • Understanding and proficiency in Lockout/Tagout (LOTO), • Follow company safety procedures and enforce safety policies., • Ability to climb ladders up to 10’, • Ability to clean and follow daily machine maintenance and cleaning guidelines Requirements and Qualifications::, • Must be able to work inside and outside, lift 50 lbs,. High school diploma required. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $17.00/Hr. Salary Range Maximum: USD $17.00/Hr.

National law firm seeks an Administrative Clerk for its Berkeley Heights office. This position is a full-time, onsite position Monday-Friday. Position Responsibilities: • Assist with document management, file organization, and e-filing document and media downloads/uploads., • Assist with trial preparation (creating trial binders, making copies, etc.), • Assist attorneys and staff with daily administrative tasks., • Greet clients and guests in a professional manner., • Replenish Kitchen with supplies and keeping orderly., • Assist with the processing of daily incoming and outgoing mail., • Scanning, copying and saving of documents., • Assist with document management and physical file organization., • Set up and take down of Conference Rooms for depositions and meetings., • Interact with maintenance crews and vendors when Office Administrator is unavailable., • Ordering of supplies through Staples., • Assist with processing of invoices and maintaining of invoice matrix., • Assist with document retrieval for attorneys and staff., • Assist paralegals with processing of medical records and radiology imaging., • Assist with downloading and saving of deposition transcripts., • Assist with downloading and saving Court documents., • Assist with copying of CD/DVD’s of imaging, medical records and pleadings for distribution., • Assist with voluminous mailings. Position Requirements: • Minimum of 1 year experience in the legal field., • Proficient in MS Office (specifically, MS Word, MS Excel & Outlook)., • Must be a self-starter who is well organized and can handle multiple tasks with the ability to prioritize work., • Must be a team player with a positive attitude., • Must be reliable and responsible., • Must be flexible and open-minded., • Ability to operate standard office equipment such as a computer, photocopier, postage machine, and scanner., • Excellent communication skills, both verbal and written., • Ability to work in fast paced environment while paying close attention to detail., • Professional appearance and demeanor., • Ability to work 8:00 a.m. – 5:00 p.m. Monday – Friday with exceptional attendance. Benefits include: • A competitive salary package, including the potential for bonuses, • Insurance including medical, dental, vision, disability, life, and a flexible spending account, • 401(k) retirement plan, • PTO, sick time and paid holidays, • A flexible work from home policy, • Referral program Recruiters - Please do not contact us as we are not using external recruiters to fill this position at this time.

POSITION: Facilities Engineer DEPARTMENT: Maintenance REPORTS TO: Operations Manager POSITION SUMMARY: The Facilities Engineer is responsible to fulfill the mechanical needs of both the equipment and the physical structure. This position will be responsible for the installation, maintenance, and troubleshooting of all facility equipment and machinery. In addition, he/she will be responsible for some light carpentry, painting, basic plumbing, and other duties required in the maintenance of the building. The Facilities Engineer will have direct responsibility for performing some electrical work throughout the plant and contracting, scheduling, and overseeing the work of outside labor when necessary. This individual will make recommendations regarding purchasing supplies and equipment needed to run the Maintenance Department as well as for scheduling basic equipment maintenance. He/She must consistently and efficiently perform and follow procedures in compliance to company, customer, and ISO standards. PRINCIPAL JOB RESPONSIBILITIES: • Diagnose problems and make repairs on equipment in order to minimize machine ‘downtime’ and, if necessary, schedule outside labor; i.e. factory repair., • Schedule and perform preventive and predictive maintenance on equipment., • Install and/or assist with installation of factory equipment., • Operate all shop equipment including all power equipment., • Perform some sheet metal work., • Perform electrical, plumbing, and other duties required for efficient operation of the physical plant including some HVAC programming., • Complete daily maintenance and repair logs., • Maintain and secure work tools., • Clean and maintain all work areas., • Contributes to team effort by accomplishing related results as needed., • Perform additional duties/projects as assigned by lead, management and/or Supervisor. SAFETY RESPONSIBILITIES: Must learn and comply with all Cultech, Inc. safety rules; reference to employee handbook. PRINCIPAL SKILLS AND FUNCTIONS (5+): • Ability to work independently and as part of a team with a high level of initiative and flexibility., • Capable of understanding technical customer requirements., • Ability to work and multi-task under pressure in a fast-paced environment to meet customer deadlines., • Constantly produces high quality work and maintain established production standards. JOB REQUIREMENTS: • High school education required; College degree with an emphasis on engineering preferred., • Licensed in electrical preferred; proficiency required., • Proficient in machine repair., • Proficient in use of welding equipment., • Knowledge of printing specific equipment, • Skilled in plumbing, carpentry, HVAC, electrical, and piping skills., • Familiarity with OSHA standards regarding potential job hazards and protocols., • Must be able to stand for long periods of time and work in potentially uncomfortable positions., • Ability to work effectively in a team environment., • Must be attentive to detail., • Must be able to comprehend and follow all job procedures and safety protocols. ADDITIONAL REQUIREMENTS: Employees must fulfill the performance standards of this position and comply with policies, rules and procedures of Cultech, including those set out in the Employee Handbook or otherwise communicated (verbally or in writing) to employees.As necessary, employees are expected to manage waste and chemical products properly. This job description is intended to describe the general nature and work responsibilities of the position and is not intended, and should not be construed, to be an all-inclusive list of responsibilities, skills, efforts or working conditions associated with this position. This job description and the duties of this position are subject to change, modification and addition as deemed necessary by Cultech management. Employees are required to comply with supervisory instructions and perform other job duties, responsibilities and assignments as requested by supervisors or management. The job responsibilities of this position may include cross training in other functions or positions to ensure satisfactory operation of the department or work area. This job description does not constitute an employment contract between Cultech and any employee.

Job Purpose To use your unique talents, experience, skills, education and enthusiasm to complete the Operations team and to recognize that your contribution is essential to the vision of Ring Container Technologies. Key Responsibilities and Duties Ensure the safe and efficient operation of all equipment to meet or exceed company established Overall Equipment Effectiveness (OEE) expectations and customer quality expectations. • Monitor equipment OEE for inefficiencies and recommend and/or make necessary improvements., • Develop improvements for safer and more efficient operations., • Ensure all machines guards are in place and functional., • Ensure all unsafe conditions are corrected immediately., • Ensure Lock out / Tag out policy is followed., • Troubleshoot all major problems. Responsible for continuing/implementing the Ring Family Culture in the facility. • Employees are the first priority, production is secondary., • Welcome employees to the plant every day inquiring about their personal lives and showing that Ring cares about our employees., • Manage by walking around during the shift initiating conversations with questions regarding the well-being of the employee., • Catch someone doing something well and praise. Recognize their efforts., • Understand that all employees are people and all of us have challenges. Search for the reason behind the issue, actively listen and resolve to the benefit of all. Responsible for leading and supporting employee engagement initiatives. • Conduct focused walks semi-weekly through the plant to engage with the employees., • Utilizing active listening skills, ask probing questions that encourage employee input on issues or opportunities related to safety, quality, performance, goals, scheduling, teamwork, etc.,, • Note opportunities for improvement and potential solutions based on employee input., • Develop strategies that all for employee led teams to implement or ‘try’, • Provide ongoing feedback to employee led teams and support efforts that lead to improved results, even during times of initial failure., • Celebrate wins and recognize employees participating on successful teams. Educate plant personnel on safe and proper operation of machinery, ensuring all employees receive proper and timely training. • Develop problem solving and troubleshooting skills in maintenance personnel. Maintain accurate and sufficient parts inventory while meeting the established budget. • Order and maintain min/max inventory levels of repair and/or replacement parts. Schedule and coordinate appropriate downtime to effectively perform preventative maintenance on all equipment. • Ensure equipment is clean and in ‘showroom condition’., • Pro-active in addressing machine inefficiencies during preventative maintenance. Maintain Computerized Maintenance Management Software (CMMS) system. • Maintain equipment files, vendor records, quotes, manuals, repair records, etc., • Record maintenance and repair costs; control costs through use of appropriate repair and/or purchasing methods. Coordinate with quality personnel to ensure machines are manufacturing products that exceed customer quality expectations. Schedule and coordinate all Total Productive Manufacturing (TPM) events with maintenance and production personnel. • Provide necessary training to all employees., • Establish and maintain TPM standards on all equipment., • Schedule events to ensure equipment meets TPM standards. Maintain employee documentation and schedule labor to meet budget requirements. • Maintain performance evaluations, attendance records and review time cards., • Direct the work of employees to correct improper work habits and/or behavior; reward good job performance and take corrective action as required. Communicate problems, progress reports and continuous improvement ideas to management staff, maintenance and production personnel. May perform the duties of Production Supervisor as needed or required. Support the development, implementation, maintenance and ongoing improvement of food safety, food defense, and quality systems to ensure compliance with federal, state, and local government regulatory food safety requirements and Safe Quality Food Institute (SQFI) or British Retail Consortium (BRC) standards. • Ensure maintenance employees adhere to food safety, food defense, and prerequisite programs (such as security, pest control, foreign material control, allergen control, chemical control, etc.) as required., • Ensure all maintenance work is performed in a food-safe manner to prevent contamination and that housekeeping duties are performed and documented according to the Master Cleaning Schedule., • Foster a culture of safety, quality, and continuous improvement which proactively recognizes and addresses deficiencies., • Ensure that sufficient maintenance budget is created each year to maintain a high standard of quality and food safety of the facility structure and all equipment. Experience, Educational and Technical Qualifications Our Maintenance Manager must have a minimum of 5 years supervisory experience in a manufacturing environment and a 4 year technical degree and/or equivalent military experience. He/she must have the ability to provide technical guidance through past experience and industry knowledge. He/she should possess strong people skills, leadership qualities, managerial abilities, a sense of urgency, accountability, business ethics, professionalism, self-motivation and the desire and focus to improve the business. #LI-BH1 Ring Container Technologies is an equal opportunity employer. It is the policy of Ring to apply recruiting, hiring, training, promotion, compensation and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information.

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Refrigeration Technician (Blue Seal Toxic) Location: Linden NJ (on-site) Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid drivers license

Job DescriptionWe are seeking Shop Foreman to join our team! You will manage and maintain our machine a repair shop. Responsibilities: Manage jobs and employees. • Repair, install, and adjust industrial machinery and pipeline distribution systems, • Troubleshoot and repair defective equipment, • Perform routine preventative maintenance, • Respond to work order requests in a timely fashion, • Adhere to all safety policies and proceduresQualifications: SHOP FOREMAN EXPERIENCE REQUIRED PUMP MECHANIC EXPERINCE PREFERRED • Previous experience in machinery or other related fields, • Strong mechanical aptitude and troubleshooting skills, • Familiarity with industrial tools and equipment, • Ability to handle physical workload

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, and Gourmet Garage® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. The ideal candidate will have a strong background in designing, developing, and implementing complex projects, with focus on automating data processes and driving efficiency within the organization. This role requires a close collaboration with application developers, data engineers, data analysts, data scientists to ensure seamless data integration and automation across various platforms. The Data Integration & AI Engineer is responsible for identifying opportunities to automate repetitive data processes, reduce manual intervention, and improve overall data accessibility. Essential Functions • Participate in the development life cycle (requirements definition, project approval, design, development, and implementation) and maintenance of the systems., • Implement and enforce data quality and governance standards to ensure the accuracy and consistency., • Provide input for project plans and timelines to align with business objectives., • Monitor project progress, identify risks, and implement mitigation strategies., • Work with cross-functional teams and ensure effective communication and collaboration., • Provide regular updates to the management team., • Follow the standards and procedures according to Architecture Review Board best practices, revising standards and procedures as requirements change and technological advancements are incorporated into the >tech_ structure., • Communicates and promotes the code of ethics and business conduct., • Ensures completion of required company compliance training programs., • Is trained – either through formal education or through experience – in software / hardware technologies and development methodologies., • Stays current through personal development and professional and industry organizations. Responsibilities • Design, build, and maintain automated data pipelines and ETL processes to ensure scalability, efficiency, and reliability across data operations., • Develop and implement robust data integration solutions to streamline data flow between diverse systems and databases., • Continuously optimize data workflows and automation processes to enhance performance, scalability, and maintainability., • Design and develop end-to-end data solutions utilizing modern technologies, including scripting languages, databases, APIs, and cloud platforms., • Ensure data solutions and data sources meet quality, security, and compliance standards., • Monitor and troubleshoot automation workflows, proactively identifying and resolving issues to minimize downtime., • Provide technical training, documentation, and ongoing support to end users of data automation systems., • Prepare and maintain comprehensive technical documentation, including solution designs, specifications, and operational procedures. Qualifications • A bachelor's degree or higher in computer science, information systems, or a related field., • Hands-on experience with cloud data platforms (e.g., GCP, Azure, etc.), • Strong knowledge and skills in data automation technologies, such as Python, SQL, ETL/ELT tools, Kafka, APIs, cloud data pipelines, etc., • Experience in GCP BigQuery, Dataflow, Pub/Sub, and Cloud storage., • Experience with workflow orchestration tools such as Cloud Composer or Airflow, • Proficiency in iPaaS (Integration Platform as a Service) platforms, such as Boomi, SAP BTP, etc., • Develop and manage data integrations for AI agents, connecting them to internal and external APIs, databases, and knowledge sources to expand their capabilities., • Build and maintain scalable Retrieval-Augmented Generation (RAG) pipelines, including the curation and indexing of knowledge bases in vector databases (e.g., Pinecone, Vertex AI Vector Search)., • Leverage cloud-based AI/ML platforms (e.g., Vertex AI, Azure ML) to build, train, and deploy machine learning models on a scale., • Establish and enforce data quality and governance standards for AI/ML datasets, ensuring the accuracy, completeness, and integrity of data used for model training and validation., • Collaborate closely with data scientists and machine learning engineers to understand data requirements and deliver optimized data solutions that support the entire machine learning lifecycle., • Hands-on experience with IBM DataStage and Alteryx is a plus., • Strong understanding of database design principles, including normalization, indexing, partitioning, and query optimization., • Ability to design and maintain efficient, scalable, and well-structured database schemas to support both analytical and transactional workloads,, • Familiarity with BI visualization tools such as MicroStrategy, Power BI, Looker, or similar., • Familiarity with data modeling tools., • Familiarity with DevOps practices for data (CI/CD pipelines), • Proficiency in project management software (e.g., JIRA, Clarizen, etc.), • Familiarity with DevOps practices for data (CI/CD pipelines), • Strong knowledge and skills in data management, data quality, and data governance., • Strong communication, collaboration, and problem-solving skills., • Ability to work on multiple projects and prioritize tasks effectively., • Ability to work independently and in a team environment., • Ability to learn new technologies and tools quickly., • The ability to handle stressful situations., • Highly developed business acuity and acumen., • Strong critical thinking and decision-making skills. Working Conditions & Physical Demands This position requires in-person office presence at least 4x a week. Compensation and Benefits The salary range for this position is $75,868 - $150,644. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements

Job DescriptionSalary: 15.13 CLIENT SERVICES TEAM Short Hills, NJ Reports To: Studio Manager Employment Status: Part Time/Non-Exempt KEY RESPONSIBILITIES • Greet and engage clients in a positive and friendly manner, • Provide the highest level of client/customer service and hospitality to all clients/prospective clients, • Share pricing and class information with prospective clients, • Deliver Megaformer machine demos to new clients, • Complete studio tours with new clients, • Work alongside and support SLT instructors to ensure a successful and seamless client check-in and class experience, • Ensure complete knowledge of Mariana Tek system, • Assist Management with day-to-day operations of the studio, • Ensure prompt response to studio emails; notify Studio Manager if needed, • Understand SLT product knowledge, policies and procedures for retail operations, • Complete basic Megaformer machine maintenance, • Actively maintain studio cleanliness and organization between each class so each client receives the best SLT experience, • Assist in retail inventory at the end of the month, • Complete opening and/or closing checklists, • Perform other studio duties as needed QUALIFICATIONS • Mariana Tek software experience a plus, • Leadership experience a plus, • Must have superior customer service skills, • Must have excellent interpersonal skills and a service-oriented outlook, • Must be highly organized, • Ability to work independently as well as on a team, • Should have a strong ability to communicate clearly with team members, clients and senior management, • Must be able to move and/or lift heavy items, up to 50 lbs. WORK REQUIREMENTS • Must be available to work:, • Minimum of three shifts per week; minimum 4 hours each, • Ability to work flexible hours; early morning/late night/ weekends, • Some holidays (open year-round) SLT actively seeks a diverse applicant pool in order to build the strongest possible team. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Overview The Injection Molding Specialist is responsible for all aspects of the injection molding process including start-up, shutdown, and troubleshooting of the injection molding processes and related equipment. The technician will ensure that the necessary adjustments are made to the equipment so that the processes run efficiently. Work Schedule Monday - Wednesday: 7:00pm - 7:00am Thursday: 7:00pm-1:00am Essential Functions • Responsible for all aspects of the injection molding process, including, but not limited to, set-up and tear down, troubleshooting, equipment maintenance and workflow., • Work with production personnel to ensure molded components meet requirements and make adjustments as needed., • Provide molded components in a timely manner to ensure production schedules are met, • Generate documentation on molding runs that can be used to control traceability and ensure reproducibility., • Follow established procedures to maintain a clean and organized environment., • Perform routine maintenance on machines and equipment., • Troubleshoot electrical/mechanical systems and connections between the Mold/Tool and the machines., • Analyze, install, test, and review machine settings to increase operating efficiency., • Draft and perform mold validations., • Complete required paperwork - routing/setup sheet, time sheet etc., • Confer with Production Manager, area leaders, programmers, engineers, or others to resolve molding or assembly issues., • Input and/or retrieve the correct program code from the machine and network., • Other assignments as requested. Qualifications • Minimum of 5 years' experience in injection molding, • Excellent organizational skills., • Good oral and written communication., • Experience with Process Control Documentation, • Basic knowledge of computers including MS office, Email, etc., • Understanding of IM codes and command of the machine, • Ability to develop setting sheets and setting parameters for current and new products, • High school diploma or equivalent, • Ranger Robot Program a plus, • Bilingual in Spanish/English a plus PHYSICAL REQUIREMENTS • Ability to lift up to 50 lbs., • Ability to stand for long periods of time, • Ability to frequently move, transport, and position equipment WHAT WE OFFER: • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Hourly Range: $ 20.68 -$30.17 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process. Humanscale is an Equal Opportunity Employer (Disabled/Veteran)

Summary \n The Cannabis Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Cannabis Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. \n\n The Cannabis Machine Operator must be able to operate and oversee specialized automated cannabis packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated cannabis packaging equipment; therefore an understanding of mechanical and electrical systems is required. \n\n The Cannabis Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. \n\n The Cannabis Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday, 6:30am to 3:00pm. 32-40 hours per week. \n Job Duties \n\n • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day.\n, • Responsible for determining the work flow sequence to minimize changeovers. \n, • Stages product work flow so it is ready for processing after pre-shift briefing to techs.\n, • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns. \n, • Direct assembly or disassembly, and cleaning as required for shift start and end operations.\n, • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities.\n, • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc.\n, • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product.\n, • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste. \n, • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention. \n, • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible.\n, • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance.\n, • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO.\n, • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards \n, • Serve as a leader and champion of Bud's values in the Packaging operations\n, • Learn and operate software used for the company's Manufacturing Execution Systems\n\n\n Skills & Attributes \n\n • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences \n, • Strong organizational, critical thinking, presentation, and project management skills \n, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner \n, • Exceptional interpersonal and relationship building skills \n, • Advanced math and reading comprehension \n, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence \n, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce \n, • Understands and thrives in fast-paced, KPI-driven production environments \n, • Team player willing to assist in any function of packaging and labeling \n, • Ability to prioritize the business in all decision making \n\n\n Education & Experience \n\n • HS Diploma or 2+ years of related field experience\n, • 1+ years of experience in a leadership role\n, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry \n, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition \n, • Experience working with various complex manufacturing machines or electrical systems\n, • Proven track record of managing the scope of operations in a complex and highly regulated business environment \n, • Cannabis product knowledge strongly preferred \n, • Working knowledge of Metrc preferred\n\n\n Working Conditions/Physical Demands: \n\n • Able to stand or sit for extended periods of time. \n, • Able to lift up to 50 pounds\n, • Able to work a fully flexible schedule including nights and weekends if necessary\n, • Extensive use of hands, including repetitive movements\n\n Additional Requirements: \n\n • Must pass all required background checks\n, • Must have a reliable vehicle\n, • Must be and remain compliant with all legal or company regulations for working in the industry\n, • Must possess valid driver's license \n, • Must be a minimum of 21 years of age\n, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry\n\n Benefits: \n We offer a competitive benefits package designed to support our employees' health and financial well-being. Full-time team members are eligible for medical, dental, and vision insurance, as well as participation in our Operator Incentive Plan, which rewards strong performance and operational excellence. \n #ENGHP

Job Description Dishwasher ROLE PURPOSE To provide Guests and Team Members with clean and sanitized utensils, plateware, glassware and equipment. KEY RESPONSIBILITIES & ACCOUNTABILITIES Provide Guests and Team Members with clean and sanitized utensils, plateware, glassware and equipment according to Ecosure standards. Ensure dishes and cookware are sanitized and available as needed. Maintain daily cleanliness and maintenance of dish machine. Clean and sanitize service area and kitchen throughout shift. Complete assigned prep work and beautification duties. Trouble-shoot dishwasher machine malfunctions. Keeps immediate supervisor promptly and fully informed of all problems or unusual matters of significance and takes prompt corrective action where necessary or suggests alternative courses of action which may be taken. Performs all duties and responsibilities in a timely and effective manner in accordance with established company policies to achieve the overall objectives of the position. Maintains a favorable working relationship with all other company Team Members to foster and promote a cooperative and harmonious working climate, which will be conducive to maximum Team Member morale, productivity, efficiency and effectiveness. At all times provides a favorable image of TGI Fridays to promote its aims and objectives and foster and enhance recognition and acceptance of all of its areas and endeavors. KEY DECISIONS Influences: Guest Experience Issues around cleanliness and sanitation MEASURES OF SUCCESS Ecosure results meet/exceed company standards Consistently fulfill the Key Responsibilities and Accountabilities above Guest satisfaction scores Cleanliness and sanitation QUALIFICATION REQUIREMENTS Must be able to perform multiple tasks, while maintaining required standards of operation, in daily activities. Must also be able to perform duties that ensure Guest satisfaction. Must follow handling and sanitation procedures and use extreme caution with utensils, plateware, glassware and equipment to avoid breakage. Must be able to frequently lift and carry up to 70 lbs., up to 20 times per shift: places these items on high shelves and in walk-in freezers Must be able to frequently bend and stoop Must be able to work frequently in a hot and damp environment Must be able to speak clearly to communicate orders to other cooks and expediter Must be able to hear cooks’ and W/W’s requests in the midst of loud background noise Must be able to stack, walk and move during entire shift Must be able to frequently immerse hands in water COMPETENCIES PASSION FOR THE GUEST – Actively contributes to fun, friendly and engaging service. Understands how their role impacts the Guest. Displays a caring attitude towards Guests. Contributes to the Guest experience through knowledge of job and products. Demonstrates a service attitude by providing support to those who are directly serving the Guest. Handles special requests in a responsive and positive way. Utilizes customer feedback to provide a better Guest experience. COMMUNICATION – Keeps the lines of communication positive, open and productive. Pays close attention to Guests' and coworkers’ special requests to ensure accuracy. Responds positively to conflict situations and works to find appropriate solutions. Keeps interaction positive and productive; avoids conveying negative messages. Shares information with others to raise awareness of potential needs and concerns. Listens carefully and attentively to others without interrupting. Asks thoughtful questions to ensure proper understanding of the message being conveyed. Contributes to pre-shift meetings by providing relevant updates and asking appropriate questions. PASSION & INITIATIVE – Keeps it fun and keeps up with the pace. Shows Guests and Team Members that (s)he genuinely enjoys the job. Displays passion, energy and pride in doing the job right. Works with a strong sense of urgency and drive; pushes for quick, yet accurate results. Focuses on the way (s)he approaches a task, not just the task itself. Takes independent action to improve existing systems and processes. Enthusiastically promotes the TGI Fridays brand and menu items. RELIABILITY & ACCOUNTABILITY – Works hard and delivers quality results. Arrives on time and ready to work dressed in proper dress code. Attends all required shift meetings and is prepared to contribute. Minimizes wastes and costs (e.g., maintains proper rotation of inventory). Responds to complaints about food quality issues by owning the situation and solving the problem quickly and properly. Uses good judgment and acts with integrity in all dealings; demonstrates consistency in words and actions. FLEXIBILITY & STRESS TOLERANCE – Knows that anything can and will happen and handles uncertainty in a calm, controlled manner. Addresses daily challenges and obstacles with confidence and a positive attitude. Easily adjusts to meet changing demands and new responsibilities. Prioritizes effectively and multitasks to ensure all tasks are completed by the end of the shift. Maintains an even-tempered demeanor even in stressful situations. Responds calmly to problems and controls emotional reactions. Handles him/herself in a professional manner at all times. TEAMWORK & COLLABORATION – Fuels an environment where everyone pitches in and gets along. Recognizes the importance of working together to accomplish goals. Actively promotes cooperation, respect, and acceptance of all Team Members. Establishes positive and supportive working relationships with all Team Members to maintain a productive environment. Takes on additional responsibilities to ensure proper coverage during rush periods. Reaches out to Team Members when necessary to ensure timely completion of all tasks. Takes advantage of opportunities to set an example for new or inexperienced Team Members

Job Description The Singelyn Group, a progressive McDonald's Franchisor is seeking an assistant maintenance crew person to work within our network of 20 locations (and growing) in New Jersey and New York City. Essential Functions & Key Responsibilities: • Comply with all safe work procedures when performing tasks, • Repair machine defects found other than scheduled when discovered., • Report any machine defects identified during repairs that cannot be corrected to Maintenance Supervision., • Maintain proper housekeeping on the job site, • Improve skill level either by training or on the job experience., • Be a team player, assisting fellow mechanics or other employees requiring help., • Work required overtime to complete repairs of down equipment., • Strive to perform work in a timely manner, reducing machine down time to a minimum., • Maintain a “zero defect” attitude and perform repairs once., • Ask questions if not familiar with the repair or procedure. List of expected skill areas to be held or obtained, (not all are required): • Machinist, • HVAC, • Pipefitter, • Electro-pneumatic troubleshooting, • Mechanical troubleshooting, • Machine assembly and installation, • Welding, brazing, burning, • Building repair, general maintenance, • Electrician Please forward your Resume with a Cover Letter in your application.

TGIF - 400 S Park Ave [Busser / Porter / Cleaner] As a Dishwasher at TGIF, you'll: Ensure dishes and cookware are sanitized and available as needed; Maintain daily cleanliness and maintenance of dish machine; Clean and sanitize service area and kitchen throughout shift; Complete assigned prep work a

Job Description CNC MILL MACHINIST / SET UP - All Shifts -- Manufacturing/Machine Shop N.J. Precision Technologies, Inc. – Mountainside, NJ Job Description PLEASE READ BEFORE APPLYING: • MINIMUM 5 YEARS SET-UP EXPERIENCE - CNC MILLING or TURNING SET-UP EXPERIENCE REQUIRED, • FULL TIME : FIRST SHIFT, SECOND SHIFT, THIRD SHIFT, WEEKEND SHIFTS AVAILABLE, • ALL HAAS CNC MACHINES and Kitamura, • STRONG WORKING KNOWLEDGE OF SET-UP TECHNIQUES FOR PRODUCTION AND PROTOTYPE., • STRONG WORKING KNOWLEDGE OF CNC PROGRAMMING AND EDITING WITH G & M CODES OR PROGRAMMING SOFTWARE., • ABILITY TO SET-UP & OPERATE USING VICES OR SIMILAR TOOLING HARDWARE AND FIXTURES., • MUST HAVE EXPERIENCE INSPECTING PARTS AND READING MICROMETER , CALIPER, HEIGHT GAGE AND DIAL INDICATOR, • BLUEPRINT READING A MUST., • FAST PACED ENVIRONMENT. Summary Established, ISO-certified contract manufacturer seeking full-time, dedicated CNC MACHINIST for an ultra-high tech, All Haas CNC Mill department. Primarily working in the Aerospace and Medical device industries. Employees receive top pay and benefits, including medical, prescription, dental, vision, 401K with match, etc. Our modern, air-conditioned facility is located in Mountainside, N.J. Responsibilities • Performs SET UP, PROGRAM TEST, FIRST PIECE "PROVE-OUT" RUN, in-process inspections, and CNC of precision-machined parts., • Works with production and engineering teams to address and resolve production issues in CNC Milling., • Responsible for selecting correct tooling hardware and measurement equipment., • Responsible for ensuring that the machines are well maintained ., • Working in accordance with ISO requirements., • Must be able to work independently. Requirements • Education: High school diploma or GED., • Experience: Minimum 5 years CNC Machining / Milling experience in a machine shop or manufacturing environment., • Measurement and inspection skills a must., • Strong knowledge of Blueprint reading with GD&T required., • Working within the ISO 9001 quality standard required. Skills, Knowledge, Abilities • Must have a strong aptitude in mechanical blueprints and drawings, • Must have a working knowledge of CAD systems., • Must be very detail oriented., • Strong math skills., • Ability to follow process plans, routers and inspection plans., • Has a strong background with workplace safety, OSHA regulations., • Must be able to effectively communicate with employees of varying education levels., • Comfortable working with very tight , "tenths" tolerances., • Must be experienced in measuring tools such as micrometers, calipers, height gage, dial indicators. ------------------------------------------------------------ 1.0 JOB DESCRIPTION SUMMARY 1.1 This position establishes the authority, reporting relationships, tasks and duties with performance standards for the CNC Specialist. 2.0 JOB TITLE 2.1 CNC Specialist 3.0 REPORTING RELATIONSHIPS 3.1 The CNC Specialist reports to the CNC Manager. 4.0 REQUIREMENTS 4.1 Education Required: High School diploma or GED. Preferred: Vocational School Certificate / Associates degree in Mechanical, MFG, IND Engineering technology. 4.2 Licensing, Registration, and certification Required: None. Preferred: None. 4.3 Experience Required: A minimum of one year experience in CNC or tooling production. 4.4 Skills, Knowledge, Abilities 4.4.1 Must have strong math skills. 4.4.2 Ability to read and understand engineering drawings. 4.4.3 Must be able to effectively communicate with other employees of varying education levels. 4.5 Physical Requirements 4.5 The physical requirements are stressful with the majority of time spent standing working with machinery. This position requires manual dexterity of the hands and the normal bending and twisting associated with plant operations. Walking, turning the head and torso, reaching, grasping, bending, stooping, kneeling and flexing the arms, legs, wrists, and fingers and the ability to lift at least forty (40) pounds. Must be able to work in areas with moderate to high noise levels. Must be able to constantly kneel, squat, climb and have full bending abilities at the waist (touch the toes). The body senses of sight (not color blind), hearing (safety) is required. Good vision to read diagrams and business documents. Must be able to wear safety glasses and hearing protection for prolong periods of time. 4.6 Mental: Basic math skills, mechanical engineering understanding, blueprint reading, as well as reading, writing and spelling and the ability to communicate clearly and effectively in English. 5.0 WORKING CONDITIONS 5.1 The majority of the time (95%) will be spent in a non-smoking plant environment. Temperatures will remain consistent throughout the year. Noise levels will be high in the plant area and moderate in the office area. Work hours will be dependant upon the weekly production and shipping schedules. Work hours may be long when specific projects are due, therefore, some extended schedules will be necessary. 6.0 TASKS AND DUTIES 6.1 Responsible for the proper operation of the machines. 6.2 Responsible for performing the daily machine set up process – clean the machine, complete the set up the machine for the first job. 6.3 Responsible for producing high quality finished products in accordance with the customer’s requirements. 6.4 Responsible for completing the job within the allotted job budget dollars. 6.5 Completes the bead blasting process when necessary. 6.6 Responsible for the proper operation and maintenance of the machines. Ensures the machine is maintained on a preventative basis. 6.7 Responsible for the machine programming functions. 6.8 Responsible for performing a quality control check on all jobs. 6.9 Responsible for setting up the machines for optimized speed and performance. 6.10 Responsible for completing the work in a safe manner. 6.11 Responsible for ensuring the shop area is clean and organized. 6.12 Responsible for accurately recording the time spent against the appropriate job. 6.13 Responsible for completing the work in accordance with ISO 9000 standards. 6.14 Responsible for working closely with the Manager with the development and implementation of the agreed upon training plan and schedule. 6.15 Ensures personal adherence to the company policies and practices. 6.16 Performs any other duties as may be assigned by the Manager. 7.0 MEASUREMENTS OF PERFORMANCE 7.1 Ability to produce each job in accordance with the customer’s requirements. 7.2 Ability to produce each job in accordance with the allotted number of production hours and optimize. 7.3 Ability to set-up as per the plot/print/router/set-up sheets in a timely manner. 7.4 Ability to edit programs (G & Mo codes and/or Mastercam) for efficient and practical parts production. 7.5 Ability to transmit program from database to local PC and to machines. 7.6 Ability to account and record the hours spent per job. 7.7 Consistently maintains the work area in a clean, organized and professional manner – ie: clean floors, machines, tools secured, etc. 7.8 Ability to work with minimal supervision. 7.9 Ability to service and maintain the machines to eliminate/minimize machine downtime 7.10 Ability to adhere to the company’s policies and procedures. 7.11 Has demonstrated a working knowledge level of the standard operating procedures as defined by ISO 9000. 7.12 Ability to work within the company’s safety practices and procedures. 7.13 Ability to complete the assigned training schedule. ------------------------------------------------------------------------------------------ Company DescriptionNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. Please visit our Website: www.njpt.comNew Jersey Precision Technologies, Inc. is a high-tech Manufacturer located in Mountainside, New Jersey. We specialize in electrical discharge machining (EDM) and precision manufacturing of all mechanical components for the aerospace and medical device industries as well as tooling for the plastics industry and stamping industry. Our modern facility is fully climate controlled and utilizes more than 60 EDM and CNC machines. Our EDM & CNC departments are running 24 hours per day, 7 days per week. Our CNC Lathe, CNC Mill, Sinker EDM, Wire EDM & Small Hole Drilling EDM machines are state-of-the-art and the latest generation available. Our CNC Technicians and Electrical Discharge Machining technicians perform CNC Programming, CAD, Automated Set-ups and efficient production & prototype operations. NJPT believes in continual improvement programs including continual employee training programs. In addition to off sight custom training, in-house training and other learning methods, NJPT offers a complete tuition reimbursement program from those FULL-TIME individuals who may want to earn or complete a college degree. The NJPT FULL-TIME benefits package is outstanding with matching 401K retirment plan, profit sharing, Medical plan, Prescription plan, Dental & Optical plans, Credit Union, etc. NJPT is a US Department of Defense contractor and controlled by ITAR (International Traffic in Arms) government regulations to only hire citizens of the United States or those individuals with a US permanent resident green card. An equal opportunity employer, NJPT is committed to its employees and employee satisfaction. NJPT is a great place to work and a great place to grow. \r\nPlease visit our Website: www.njpt.com

Job Description POSITION SUMMARY: As a Tablet Coating Operator, you will operate tablet coating machines and will be responsible for preparing coating solutions, loading and unloading tablets, monitoring the coating process, conducting quality checks, troubleshooting issues, cleaning and maintaining the coating equipment following standard operating procedures (SOPs) and cGMP regulations. This role requires a strong attention to detail, technical skills, and adherence to all quality and safety standards to ensure efficient and consistent coating operations of nutritional tablets. You will work closely with the Quality department to ensure high-quality nutritional products are produced. ESSENTIAL FUNCTIONS: · Set up, operate, and maintain tablet coating equipment to ensure the efficient and consistent coating of nutritional tablets. · Prepare coating solutions according to specific formulations based on the Bill of Material (BOMs) and ensure their proper viscosity and quality. · Load tablets into the coating machine and unload them after the coating process, ensuring adherence to procedures to avoid risk of contamination and damage. · Monitor the coating process, ensuring tablets are coated evenly and equipment is functioning correctly. · Conduct frequent quality checks on coated tablets to verify the coating thickness, appearance, and adherence to quality standards. · Troubleshoot any issues that arise during the coating process promptly to minimize downtime and maintain productivity. · Regularly clean and maintain the coating equipment to prevent cross-contamination and ensure proper functionality. · Maintain accurate records of production data, coating specifications, and any deviations from SOP. · Train other operators as needed. · Follow all safety and cGMP guidelines to maintain a safe and compliant work environment. · Perform other duties as assigned by your supervisor or Manager. Strong attention to detail, technical aptitude, and commitment to safety and quality are essential for this role. REPORTING RELATIONSHIPS: Critical Operating Relationships: Lead, Supervisor, Manager, Operators, Quality Department QUALIFICATIONS: · Familiarity with operating tablet coating machines and related equipment. Establish a good understanding of the coating process, coating solutions preparation, and equipment maintenance. · Great attention to detail to ensure precision and accuracy during tablet coating operations to satisfy quality standards. · Ability to identify and solve problems by assessing a situation, identifying the issue, and generating solutions. · Strong commitment towards following quality control procedures and cGMP guidelines to ensure that all products meet industry standards and regulations. · Ability to learn and be proficient with company ERP and Scheduling systems to ensure orders are followed and executed properly and inventory is accurate. · Ability to recognize and report unsafe conditions. · Effective communication as part of a team environment. · Ability to follow written and verbal instructions in English. · Follow and teach SOPs and Bill of Materials (BOMs). · Perform basic mathematical calculations. · Must have a safety consciousness mindset to ensure a safe workplace is maintained. Education: High school diploma or GED is required. Experience: · 2 – 4 years manufacturing experience preferred. · Experienced in following SOPs and GMPs KNOWLEDGE, SKILLS AND ABILITIES: · Proficient at performing all tasks to successfully operate tablet coating machines, ensuring smooth and consistent production while minimizing downtime. · Maintain high-quality standards throughout the entire process. · Attention to detail in order to monitor and identify any inaccuracies and deficiencies during the coating process and take appropriate corrective actions. · Be proactive and reactive in troubleshooting and resolving issues that may arise to minimize disruptions and downtime. · Ability to stand and walk for extended periods throughout the shift in non-temperature controlled environments while wearing required PPE. Ability to lift up to 50lbs. · Strict adherence to safety protocols and guidelines to ensure a safe work environment. · Maintain accurate and comprehensive records of production data, quality checks any deviations from standard operating procedures, and any other required records. · Maintain equipment through regular cleaning and maintenance, ensuring optimal working conditions and eliminating risks of cross-contamination. · Work effectively as part of a team and collaborate with colleagues from other departments to achieve company goals. · Efficiently manage tasks and maintain a steady workflow to meet production targets. · Seeks opportunities to optimize processes and enhance overall efficiency. Meeting these optimal expectations ensures that the Tablet Coating Operator contributes significantly to the success of the manufacturing process in achieving all goals and objectives. Company DescriptionReliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions: · Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 Patented and Trademarked raw materials. · Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics and plant proteins. Customer base is branded, domestic and international companies. With over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.Reliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions:\r\n\r\n· Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 \r\n Patented and Trademarked raw materials.\r\n\r\n· Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics \r\n and plant proteins. Customer base is branded, domestic and international companies. \r\n\r\nWith over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.

Job Description Overview We create communities where employees thrive in their work, helping our residents thrive in their homes. Atria Senior Living’s family of brands has openings for individuals looking for a career with outstanding benefits, including: • Paid holidays and PTO, • Employees may receive annual anniversary rewards dependent on classification, starting at $500 for Full Time employees, • Employees may be eligible to receive an Annual Scores Reward of $500 (Full Time) or $250 (Part Time) based on community survey results, • Benefits package also includes Health, Dental, Vision, and Life Insurance, • Retirement Savings Plan / 401(k) employer match, • Tuition reimbursement (U.S Based Communities) *Enrollment in benefits varies by employee classification; anniversary reward amounts vary by location As a valued team member at Atria, you’ll work in a supportive environment that provides advancement opportunities and promotes a healthy work-life balance. Apply now! Responsibilities • Diagnose and repair problems in such areas as HVAC, electrical, plumbing, major appliances, carpentry, emergency systems, flooring, hardware accessories, masonry, painting/wallpaper, water features (pools, spas, etc.) and waste management systems., • Complete assigned service requests and repairs consistent with company operating and equipment/supply standards and in a safe and timely manner., • Perform turn-key work as required to ensure vacant apartment homes are rent-ready in a timely manner., • Maintain customer service standards. Respond to resident requests and work with residents to minimize/resolve problems and complaints. Follow-through to ensure issue is resolved., • Apply all applicable Atria Policies and Procedures such as, but not limited to, company operating and safety standards. Promote safe work practices among on-site staff., • Ensure compliance with all federal, state and local laws, specifically Fair Housing regulations, building codes and environmental laws and regulations., • Assist with organizing and prioritizing service requests and general maintenance tasks., • May drive company vehicle from community to social and other various destinations (only if required by community)., • May supervise the work of other associates and outside contractors., • May perform other duties as assigned. Qualifications • High School diploma or equivalent (GED) preferred., • 1 year experience in property management maintenance performing the duties associated with a Maintenance Technician., • Able to perform basic arithmetic skills such as measurement, addition, subtraction, multiplication and division in order to do basic calculations and analysis such as estimating, determining averages and percentages, and totals., • Able to occasionally operate general office equipment such as, but not limited to, personal computer, telephone, photocopying machine, facsimile machine and postage machine., • Able to frequently use general maintenance tools, supplies and equipment such as, but not limited to, hand tools, pressure washers, blowers, paint equipment, pool chemicals, ice removal equipment, ladders, landscaping equipment, sanders and safety equipment., • Able to frequently handle and use chemicals and general cleaning supplies., • Position requires driving responsibilities (may use Company provided vehicle and/or personal vehicle)., • Must possess valid driver’s license., • Must satisfactorily meet and be in compliance with Atria motor vehicle policy standards.

Job Description Thermo Plastics is a leading manufacturer in the plastics industry, known for quality, innovation, and reliability. We are currently seeking a skilled Machine Maintenance Mechanic/Vacforming/Thermo Forming machine set up to join our maintenance team and help keep our production running smoothly. Responsibilities: Troubleshoot, maintain, and repair plastic processing machinery and equipment Perform preventative maintenance on machines to ensure optimal performance Assist with equipment setup, changeovers, and calibration Maintain maintenance logs and records Ensure safety standards are followed at all times Requirements: Mechanical experience in an industrial or manufacturing setting Familiarity with plastic processing equipment is a plus Strong problem-solving skills Ability to work independently and as part of a team Must be reliable and safety-conscious

Job Description We are seeking for a Machine Operator, this is a temp to perm position. Training available. Responsibilities: • Troubleshoot and resolve issues in a timely fashion, • Load and unload equipment and materials, • Provide innovative solutions to improve plant efficiency, • Conduct routine preventive maintenance on the plant, • Log and record readings for equipment and procedures Qualifications: • Previous experience operating machines and mechanically incline., • Familiarity with plant tools and equipment, • Strong troubleshooting and critical thinking skills, • Ability to handle physical workload, • Ability to thrive in a fast-paced environmentCompany DescriptionMany of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along!Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Job Title: Maintenance Technician Location: Linden, New Jersey Shifts: 12-hour shifts 530 am -530 pm or 530pm - 530am Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • Perform Other Duties as AssignedQualifications, • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job Description Purpose: To facilitate the free flow of administrative documents and information to ensure timely accurate billing of customers and payment of service and repair vendors. Roles and Responsibilities: • Continual interaction and follow up with service and repair vendors to ensure all required information to make payment and rebill customers is complete., • Follow up on missing or inaccurate information and prepare invoices for rapid review and approval., • Issue PO numbers when appropriate., • Assist customers needing service related documents as needed,, • Ensure all required information is attached to or annotated on invoices prior processing, including but not limited to FHWA forms, call sheets, service location, trailer number and owner, maintenance deal type, etc., • Daily review of open service order report for old open service orders and follow up and reconcile., • Serve the customers in an extraordinary manner so that our brand name and reputation continue to flourish. Knowledge, skills and abilities: • 3-5 years of administrative experience., • Demonstrated strong work ethic and integrity., • Strong complex data entry skills and attention to detail., • Experience and skills with MS office applications including word and excel., • Excellent time management, organization and communications skills; oral (telephone) and written (email)., • Ability to complete multiple tasks and manage a high volume of work., • Well organized and self-directed. Education: High School diploma or equivalent. College degree a plus, but not required. Physical Demands Work Environment: • Frequently required to sit and use hands/fingers to handle, feel and to manipulate keys on a keyboard. Occasionally required to stand, walk and reach with arms and hands., • Vision abilities required by this job include close vision., • Typical office work environment, which is usually quiet. Required to operate a personal computer, photocopy machine, facsimile machine, calculator, telephone, etc. The above is intended to describe the primary responsibilities and duties associated with the performance of this job. It is not to be construed as an exhaustive statement of assignments, responsibilities, or requirements.

Job Description POSITION SUMMARY: Tablet Press Operator will set up, maintain, and run capsule machine. Operator will also be responsible for recording logs every 30 minutes, submitting samples to QC for approval, and for capsule quality. Capsule operator must not leave machine unattended while machine is running. Product quality to be checked at start up and after breaks. ESSENTIAL FUNCTIONS: · Set up press with floor supervisor. · Verify correct punches are used and in good order. · Feed material to hopper to run press. · Verify correct blend is being used. · Bring samples to QC for approval. · During run, controls for weights, thickness, and hardness are taken and recorded into a log every 30 minutes. · Responsible for keeping a log for every break, change in operator, and machine being stopped. · Monitor tablets coming off punch and dropped into container. · Responsible for tablet quality. · Must remain at machine while machine is running. · Responsible for machine’s routine maintenance and cleaning by following SOP instructions. · Responsible for taking samples from beginning, middle, and end of run and recording on log. · Label containers with correct information as described on batch ticket. · Work area must be kept in accordance with Good Manufacturing Practices. · Remove all trash at the end of the shift and clean room thoroughly. · Keep current equipment use and cleaning log. REPORTING RELATIONSHIPS: Critical Operating Relationships: QUALIFICATIONS: Education: • High School Diploma or GED Experience: · Preferred experience in nutraceutical or solid dosage manufacturing. KNOWLEDGE, SKILLS AND ABILITIES: · Must be able to lift 50 lbs. · Must be able to bend, stretch, and stand for extended time intervals during work shift · Must have good oral communication skills to be able to complete work tasks as instructed · Ability to understand written and verbal instructions in English OPTIMAL EXPECTATIONS: Company DescriptionReliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions: · Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 Patented and Trademarked raw materials. · Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics and plant proteins. Customer base is branded, domestic and international companies. With over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.Reliance Vitamin is a high growth consumer products company in the very “on trend” natural and organic space, and is comprised of three divisions:\r\n\r\n· Private Labeling of premium branded and private label products for various companies/retailers using 450 stock products and differentiating with over 50 \r\n Patented and Trademarked raw materials.\r\n\r\n· Contract Manufacturing of premium powders, tablets and capsules differentiating with over 50 patented and trademarked raw materials, specializing in probiotics \r\n and plant proteins. Customer base is branded, domestic and international companies. \r\n\r\nWith over 30+ years in business, Reliance provides expertise and resources to deliver nutritional innovation that truly makes a difference in consumer’s lives. The Company is in the process of transforming to maximize its entrepreneurial culture and heritage while building enterprise practices to achieve sustainable performance.

Job DescriptionJob Title: Injection Molding Technician Job Description The Injection Molding Technician is responsible for all aspects of the injection molding process, including machine start-up, shutdown, troubleshooting, and equipment adjustments to ensure efficient and consistent production. This role supports production by ensuring molded components meet quality standards, maintaining documentation for traceability, and performing routine maintenance. The technician also handles small-scale issues such as cleaning tools, monitoring auxiliary equipment, and ensuring machines run continuously. Responsibilities • Set up, tear down, and troubleshoot injection molding machines and related equipment., • Make necessary machine and process adjustments to maintain efficient production., • Work closely with production personnel to ensure molded components meet specifications., • Provide molded components in a timely manner to support production schedules., • Generate and maintain documentation for molding runs to ensure traceability., • Establish procedures to maintain a clean, organized, and safe work environment., • Perform routine maintenance on molding machines and auxiliary equipment., • Complete required paperwork, including routing/setup sheets and time sheets., • Collaborate with Production Manager, area leaders, programmers, and engineers to resolve molding or assembly issues., • Input and retrieve correct program codes from machines and network systems., • Support continuous machine operation by addressing small issues such as tool cleaning and auxiliary equipment checks., • Perform other duties as assigned.Essential Skills, • 2–3 years of experience in injection molding or extrusion molding., • Strong understanding of injection molding machine operation., • Experience with process control documentation., • Ability to record and maintain machine setting parameters., • Excellent organizational, oral, and written communication skills., • Basic computer skills (MS Office, email, etc.)., • High school diploma or equivalent.Additional Skills & Qualifications, • Experience operating Ranger Robots., • Bilingual (Spanish/English).Why Work Here? Join a highly collaborative and fast-paced manufacturing environment that values safety and efficiency. You'll have the opportunity to work closely with a dedicated team of production staff, engineers, and supervisors, fostering a supportive and engaging workplace. Experience the satisfaction of maintaining production uptime and contributing to high-quality production outputs. Work Environment The Injection Molding Technician works in a fast-paced manufacturing environment with continuous machine operation and frequent interaction with molding equipment, tools, and auxiliary systems. The role requires maintaining a clean, organized workspace and following all safety procedures while supporting production uptime. Technicians are frequently exposed to noise and moving machinery, heat from molding equipment, plastic materials, lubricants, and cleaning agents. The work schedule includes Thursday 1 PM to 7 PM, Friday to Sunday 7 AM to 7 PM, and Monday to Wednesday 7 PM to 7 AM, with Thursday 7 PM to 1 AM. Temporary shift coverage may be required, and flexibility with hours is appreciated. Physical requirements include the ability to lift up to 50 lbs, stand for long periods, and frequently move, transport, and position equipment. Job Type & Location This is a Contract to Hire position based out of Piscataway, NJ. Pay and Benefits The pay range for this position is $20.00 - $33.25/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Piscataway,NJ. Application Deadline This position is anticipated to close on Jun 5, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Rutgers Federal Credit Union Member Experience Representative/Teller General Summary Assists in building valued financial relationships with our members by actively recommending and cross-selling Rutgers Federal Credit Union (RFCU) products and services that best meet our members’ financial needs while providing outstanding professional service and answering all member inquiries. Essential Functions · Assist all members, in-person or on the telephone, in a professional, timely and courteous manner; following established standards and guidelines for excellent member relations and efficiency. · Perform routine member transactions including deposits, withdrawals, cash advances, loan payments, transfers and check cashing. Sell money orders, cashier’s checks, and gift cards. Accept requests for stop payments, wire transfers, perform file maintenance on accounts, order debit/ATM cards and various other items. Provide member statements and check copies. Provide accurate accounting of transactions by balancing cash and checks daily. · Accurately opens and closes memberships as needed. · Understands the credit union’s financial goals and strategic direction. · Proactively supports the “sales and service” culture. · Utilizes account information to ask pertinent questions to assess member’s financial needs to offer the best products and services. · Assist members with telephone banking, online banking, E-Statements, mobile banking, direct deposit, incoming and outgoing wires, and account changes. · Maintains up-to-date knowledge of all credit union products and services along with the benefits and features of each. · Understands and follows all credit union policies and procedures. · Assist in balancing Automated Teller Machine (ATM). · Ensure that all information and transactions regarding RFCU, and RFCU members, is kept confidential. · Stay current with operational changes, regulations and required training. · Assist other departments as necessary. Position Requirements · Requires completion of high school education. · Prior work experience in customer service with cash handling experience. · Excellent member service and effective verbal and written communication skills. · Strong cross-selling skills. · Strong knowledge and understanding of financial products and services. · Knowledge of Outlook, Word, and Excel. · Intermediate mathematical skills. · A positive, professional image and a high degree of confidentiality within the workplace. · Must demonstrate proficiency on the Fiserv system following training. Disclaimer The above information on this description has been designed to indicate the general nature and level of work performed by employees in this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualification required of employees assigned to this job. The location of this position could be at any of our branches. Company DescriptionRutgers Federal Credit Union (RFCU) is a cooperatively owned, not-for-profit financial institution, organized in 1954. Currently RFCU has over $86 million in assets and over 7,500 members use our services. RFCU member deposits are insured up to $250,000 by National Credit Union Insurance Fund (NCUSIF), a federal government agency.Rutgers Federal Credit Union (RFCU) is a cooperatively owned, not-for-profit financial institution, organized in 1954. Currently RFCU has over $86 million in assets and over 7,500 members use our services. RFCU member deposits are insured up to $250,000 by National Credit Union Insurance Fund (NCUSIF), a federal government agency.

Job Description REQUIREMENTS: • Knowledge of basic print production utilizing mid to high-volume B/W and color digital printing., • Experience in operating large format poster printers with a minimum understanding of rips, color correction, lamination, mounting and trimming., • Ability to select appropriate machines to run specific jobs., • Ability to adapt to work volume peaks with minimum direction Ability to ensure that quality and production standards are met., • Strong ability to understand and follow specifications of both electronic and manual print forms, • Monitor, evaluate and produce according to schedule all digital print and finishing work, including flyers, booklets, presentations and other material in a quality and timely manner., • Ability to take direction from client and customers on job requirements (including: supplies, due dates and quality checks)., • Must possess a strong attention to detail- checking for color accuracy, alignments, type breaks and quality of output and ability to make adjustments as necessary, • Monitor and oversee all print jobs for accuracy (performing various Quality control checks) based on client requirements., • Perform or oversee all machine maintenance., • Assist in generating reports measuring production volumes, meter reads and usage totals., • Monitor inventory of all paper, products and supplies., • Interface daily with various customers (either in person, telephone or email) on printing issues., • Deliver and pickup customer jobs, when necessary., • Coordinate internal deliveries and maintain accurate shipping logs., • Keeps client/manager informed of operational efficiencies and potential problems., • Able to set priorities; must be flexible to adapt to changes and multi-task., • Must demonstrate leadership qualities and high customer service skills., • Other duties as assigned by TMG management. Qualifications: • High school diploma or equivalent., • Must have experience in copy and finishing services., • Minimum 3 years print shop experience or equivalent, • Minimum 2 years customer service and office related experience., • Excellent customer service skills; must possess a "can do" attitude., • Computer knowledge with Microsoft Suite, Excel and Spreadsheets., • Graphic Design, proficiency in PITSTOP, ADOBE Pro, • Handle multiple projects at one time., • Ability to effectively work individually and in team environment., • Attention to detail., • Competency in performing multiple functional tasks., • Conduct Quarterly Business Reviews with Clients, • Assertive and resourceful; self-motivated; willing to ask questions and take initiative be able to communicate clearly., • Consistently demonstrates professional demeanor, appearance and attitude. Job Posted by ApplicantPro

Job Description Pay Range: $19-$20 hourly About Us ADESA, a Carvana owned company, currently operating over 50 locations throughout the US. Our Auto Auctions, some up to 200 acres, provide a wide array of vehicle services including repair & reconditioning, auction remarketing, and many of our sites serve as market hub distribution centers. Our inventory comprises hundreds of thousands of vehicles across North America from retail to commercial, OEM & more. We work in a service industry and embrace a "we" versus "I" culture – help others, and they will help you. Our industry is fun, fast-paced, and competitive – and filled with the best people who are passionate about what they do. We're excited about the future! As an industry leader, ADESA is poised for a multi-year expansion including huge investments in facilities, massive sales growth, and an ever-increasing inventory of vehicles! We are looking for great people who want to take this journey with us! Get a sneak peek into life at ADESA! Role and Team This role supports the ADESA businesses and customers by inspecting vehicles for condition, wear, tear, neglect, missing parts, mechanical issues, previous repairs, and damage/structural damage. Complete required vehicle inspection promptly and accurately including imaging and uploading results of the vehicle condition. Interact with dealers and consumers as needed professionally as the face of ADESA and its collective businesses. Responsibilities • Communicate in a professional manner with customers (dealer or consumer), • Resolve any customer inquiries in a friendly, courteous, and professional manner; advise management of all complaints or incidents, • Ensure internal and external customers receive prompt, efficient, and courteous attention, • Inspect vehicles for signs of wear, tear, neglect, damage, previous repair, mechanical or structural damage., • Complete inspection of vehicles and ensure adherence to the defined program for the customer., • Capture data accurately on a mobile device, and work comfortably with software and technology., • Deliver results in a timely manner, • Maintain productivity levels as set forth by management., • Deliver consistent, accurate inspections with a minimal rate of errors in accordance with reasonable expectations set forth by management., • Collaborate with management and sales team members on customer needs with insights to improve services provided, • Maintain equipment and tools properly and advise the manager of any equipment maintenance or breakdown needed, • Ensure vehicles are in clean condition with radios, seats, mirrors, and other convenience items in the same position as when the vehicle arrives, • Submit completed condition reports using the appropriate technology made available to you to complete the vehicle inspection, • Complete road test if required by contract or inspection type, • Keep current on technology updates, new releases, and product development, • Understand the functionality and ability to use tools such as paint meter, OBD scanner, etc., • Develop and maintain knowledge and expertise in areas of competitor products, • Other duties as assigned. Qualifications • Must be at least eighteen (18) years of age., • Must be qualified to operate a motor vehicle and possess a valid driver's license., • Must have a demonstrated ability to read, write, and communicate effectively in English., • Must have the ability to physically operate vehicle equipment and tools., • 1 year Automotive experience: Repair Shop, Educational, Hobby, • Mechanical Aptitude, • Ability to enter data on a hand held device, • Ability to identify previous repair after appropriate training, • Ability to identify basic mechanical issues (sludge, suspension damage, radiator damage) ADESA Benefits and Perks Competitive Pay | Quality Benefits | Holiday and Paid Time Off | Education and Equipment Reimbursement Programs | Matching 401(k) | Career Path Opportunities | And More! Other Requirements To be able to do your job at ADESA, there are some basic requirements we want to share with you. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. • The physical activity requirements of the position range from Light to Medium Physical Work., • Frequent – standing, watching, touching, listening, walking, talking, • Potential – running, jumping, yelling or other rapid or forceful movement in emergency situations, • Visual acuity requirements include color, depth perception and field of vision comparable to definitions for Clerical, Administrative, Machine Operators (including inspection) positions. Physical Working Conditions This position is subject to both inside and outside environmental working conditions, including temperature changes, outside weather conditions, slightly elevated ambient noise levels, and minor atmospheric conditions affecting skin or respiratory systems, such as fumes, odors and dusts associated with internal and external service station/convenience food and petroleum dispensing operations. • Note: Refer to the Handbook and Policy Manuals for important addendum requirements to all job descriptions. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. To be able to do your job at ADESA, you must be able to read, write, speak, and understand English. Of course, we'll make any reasonable accommodations for those with disabilities to perform the essential functions of their jobs. Legal Stuff Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. ADESA is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. ADESA also prohibits harassment of applicants or employees based on any of these protected categories. Please note this job description is not designed to contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job Description We are seeking a skilled and experienced CNC Machinist to join our dynamic team. As a CNC Machinist, you will be responsible for setting up and operating computer numerical control (CNC) machines to produce high-quality precision parts. The ideal candidate should have a strong background in machining, be detail-oriented, and possess excellent problem-solving skills. This is a full-time position with opportunities for growth and advancement within our company. Responsibilities: • Set up and operate CNC machines to perform precision machining operations such as milling, turning, drilling, and grinding., • Study blueprints, sketches, drawings, manuals, or specifications to determine dimensions and tolerances of finished workpieces, sequence of operations, and setup requirements., • Select and install cutting tools, attachments, and accessories according to job requirements., • Load and unload workpieces and fixtures into the machine, ensuring proper alignment and secure clamping., • Monitor machine operations and make necessary adjustments to maintain quality and efficiency., • Inspect finished workpieces using precision measuring instruments to ensure conformance to specifications., • Troubleshoot and resolve issues that may arise during machining processes., • Perform routine maintenance on machines to ensure proper functioning and minimize downtime., • Collaborate with team members and engineers to optimize machining processes and improve overall productivity., • Adhere to safety guidelines and maintain a clean and organized work area.

Job Description Summary: A Medical Laboratory Technologist is required to perform routine medical laboratory tests for the diagnosis, treatment and prevention of disease. Responsible for operation of the laboratory. Mycology experience required. Essential Functions: To accomplish this job successfully, an individual must be able to perform, with or without reasonable accommodation, each essential function satisfactorily. Reasonable accommodations may be made to help enable qualified individuals with disabilities to perform the essential functions. · Perform technical laboratory functions including chemistry, hematology, urinalysis, immunology and /or other discipline(s) according to approved policies and procedures in which the individual has been trained. · Report test results following approved laboratory protocols alerting clinicians about abnormal results. · Ensure quality control, maintain integrity of samples, and maintain accurate record keeping. · Maintain laboratory equipment and supplies. · Set up, maintain, calibrate, clean, and troubleshoot medical laboratory instruments. · Comply with all laboratory policies and OSHA, CAP, CLIA, and additional state regulations related to safety, cleanliness and infection control. · Assist Lab Management as needed. · Perform all other duties as assigned. Skills: · Knowledge of medical laboratory principles, standards, applications, terminology and tests. · Knowledge of medical laboratory safety, cleanliness and infection control policies and regulations. · Knowledge of medical laboratory equipment and instrument uses and maintenance. · Accuracy – Ability to perform work accurately and thoroughly. · Communication – Ability to communicate effectively verbally and in writing. · Computer Skills – Proficient ability to use a computer and electronic medical record. · Confidentiality – Maintain patient, team member and employer confidentiality. Comply with all HIPAA regulations. · Customer Service Oriented – Friendly, cheerful and helpful to patients and others. Ability to meet patients and others needs while following office policies and procedures. · Detail Oriented – Ability to pay attention to the minute details of a project or task. · Flexibility – Ability to adapt easily to changing conditions and work responsibilities. · Positivity – Display a positive attitude and is a positive agent for change. · Teamwork – Work as part of a team and collaborate with co-workers. · Working Under Pressure – Ability to complete assigned tasks under stressful situations. Education and Experience: · Bachelor degree in Biological, Chemical, Physical science or equivalent · One-year clinical laboratory experience preferred Certification and Licensure: · ASCP, AMT certification or NYS license preferred Work Environment: · Environmentally controlled clinical laboratory environment · Fast paced environment with occasional high pressure or emergent situations · Frequent exposure to bodily fluids · Possible exposure to infectious specimens, communicable diseases, hazardous and toxic substances, and other conditions common to a laboratory environment · Must wear Personal Protective Equipment (PPE) such as gloves or a faceshield · Frequent interaction with a diverse population including team members, providers, patients, regulatory and accrediting agencies, and other members of the public Physical Demands: · Frequent standing, walking, grasping, carrying and speaking · Occasional sitting, reaching, bending and stooping · Lifting, carrying, pushing and pulling up to 50 pounds, with assistance if needed · Frequent use of computer, keyboard, copy and fax machine and phone · OSHA Category 1 Company DescriptionAccu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.Accu Reference is a state-of-the-art medical testing laboratory service that provides a complete range of tests for diagnosis, screening or evaluation of diseases and health conditions. We are certified under the federal government’s Clinical Laboratory Improvement Amendments (CLIA) and operate in compliance with all governmental regulations. We use the latest diagnostic technology. Accu Reference is an equal opportunity employer.

Job DescriptionBenefits: • Dental insurance, • Health insurance, • Vision insurance Title: Stationary Engineer Location: Linden NJ (on-site) Visa: USC/GC Only Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires state of New Jersey licenses for operation of hazardous refrigeration and high-pressure steam systems (Blue & Black Seals). Requires valid drivers license

Job DescriptionJob Summary We are seeking an experienced CNC Operator with a minimum of 10 years of hands-on experience in 4-axis and 5-axis machining. The ideal candidate will be highly skilled in CNC setup, operation, and programming, with strong computer literacy and the ability to independently program and optimize machining operations. Familiarity with the equipment, tooling, and manufacturing processes showcased on our website is essential. The successful candidate must possess strong communication skills, attention to detail, and the ability to work effectively within a collaborative manufacturing environment. Key Responsibilities Set up, operate, and monitor 4-axis and 5-axis CNC machines. Program CNC machines using CAM/software platforms and optimize machining processes. Read and interpret engineering drawings, blueprints, and technical specifications. Select appropriate tooling, fixtures, and machining strategies for production requirements. Perform machine adjustments and troubleshoot machining or programming issues. Conduct quality inspections to ensure components meet required tolerances and specifications. Maintain production records and documentation accurately. Collaborate with engineering, production, and quality teams to improve efficiency and workflow. Follow all workplace safety procedures and manufacturing standards. Perform routine machine maintenance and ensure equipment is in proper working condition. Required Qualifications Minimum 10 years of CNC machining experience, specifically with 4-axis and 5-axis equipment. Strong CNC programming experience and ability to independently program parts. High level of computer literacy and familiarity with CNC software/CAM systems. Ability to read and interpret technical drawings and GD&T specifications. Experience with precision machining and tight tolerance work. Strong problem-solving and troubleshooting skills. Excellent communication and teamwork abilities. Ability to work independently with minimal supervision. Preferred Qualifications Experience with advanced machining centers and multi-axis equipment similar to those featured on our website. Knowledge of tooling optimization and process improvement. Experience in aerospace, medical, automotive, or precision manufacturing industries. Technical certification or trade school training in CNC machining or manufacturing technology. Work Environment Manufacturing/shop floor environment. May require standing for extended periods and lifting materials/tools as needed. Commitment to workplace safety and quality standards is essential. Compensation & Benefits Competitive salary based on experience. Opportunities for overtime and career advancement. Benefits package available based on company policy. Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description We are seeking a Tool Maker Machinist to provide accurate tools and fixtures to support metal stamping presses. Responsibilities: • Operate machine tools to produce tooling to produce precision parts, • Build and maintain tooling, fixtures, and gages used in production, • Perform routine maintenance on machinery, • Calculate dimensions and tolerance using measuring instruments Qualifications: • Previous experience using manual machinery, i.e. lathe, knee mill, drill press, • Familiarity with heat treating of tooling, • Strong analytical and mathematical skills, • Strong attention to detailCompany DescriptionCustom metal stamper serving Aerospace, Industrial, Commercial and Military Customers. Providing high quality precision parts and assemblies since 1955.Custom metal stamper serving Aerospace, Industrial, Commercial and Military Customers.\r\nProviding high quality precision parts and assemblies since 1955.

Job Description Carter Smile is a pediatric dental & orthodontic practice in a single location. We are looking to hire an experienced pediatric dental assistant to join our energetic team. Our state-of-the-art facility utilizes the latest in technology, including Nomad, iTero, and CBCT, to provide our patients with the highest level of care available. Our practice has been professionally designed to create a happy and calming environment for both our team and patients alike. We pride ourselves on our upbeat and positive office culture, with our team leader being Callie, Dr. Carter’s adorable toy poodle, our certified therapy dog. We are looking to find a long-term teammate who shares our philosophy to provide the best possible care to our patients while delivering an unmatched experience from start to finish. Responsibilities Include: • Seat and welcome Doctor’s patients (includes helping create take home bag, choosing flavors and prepping patient/family prior to Doctor’s arrival), • Daily set up and end-of-day clean up, • Take X-Rays (Bitewings, PA, Pano, CBCT) -Assist Doctor’s with charting • Assist the Doctor with Operative Procedures (fillings, extractions, etc.) and help assist with orthodontic treatment (when needed) -Manage sterilization of pediatric and orthodontic instruments • Sterilization and prep clinical areas for the next patient, • Assist hygienists and ortho assistants with prep and cleaning of clinical area, • Help with weekly and monthly chair and sterilization machine maintenance -Help with inventory and ordering of pediatric dental supplies Qualifications: -Excellent time management skills • NJ X-ray license (CBCT, Panoramic, and Nomad machine), • Team Player with strong communication skills, • Ability to multi-task, • Must love dogs!!

Job DescriptionOur office in Piscataway, NJ is looking for a Machine Insert Operator to join our team! Shift: Monday to Friday from 1:00pm to 9:00pmFacility address: 30 Knox Dr, Piscataway, NJ 08854 As an Insert Operator, you will operate automated finishing and post-finishing equipment to meet daily production requirements of client jobs, in addition to providing assistance with the general maintenance of equipment. Why join KUBRA? You’ll enjoy a casual dress code, shift premiums, comprehensive healthcare (medical/prescription drug, dental, and vision), generous paid time off including vacation, personal holidays, sick time and paid company holidays.How You'll Contribute • Operate Pitney Bowes (PB) APS/MPS intelligent mail insertion equipment, • Work with Senior Machine Operators and the Lead Operator while learning the makeup, operating procedures, and structure of the Processing Center jobs, • Assist with operations and general maintenance of equipment, • Adhere to Standard Operating Procedures (SOP), Quality Test Methods (QTMs), and Quality Assurance (QA) processes, • Prepare and trays each job correctly for delivery to the Post Office with appropriate paperwork, • Ultimately assume responsibility for the performance, process, and quality of the assigned sorter/verifier, • Properly communicate finishing/quality concerns, service level statuses, and equipment performance issues to the appropriate personnel, • Assist in maintaining work area order and cleanliness, • Interact with other departments at the Processing Center and the Post Office to ensure the smooth flow of the mailStrengths that Shine in This Role, • Reliable – you are punctual for your scheduled shifts, have a great attendance record and are flexible to work Overtime when required, • A Team Player – you enjoy working as part of a team to meet daily production volumes and requirements for client jobs, • A great communicator – you communicate professionally, both written and verbal, • Self-motivated and organized – you are able to multi-task and perform in a fast-paced environmentSkills That Matter in This Role, • 2+ years of experience operating a machine, • Technical knowledge of machinery – you know your way around equipment and can perform general maintenance and troubleshooting of any machine issues, • Ability to perform manual labor – lifting up to 20 lbs. may be required, • High school diploma requiredWhy You’ll Love Working Here, • Enjoy excellent benefits with low premiums, plus Healthcare and Wellness Spending Accounts to keep you and your family covered, • Earn more with shift premiums and annual performance-based bonuses, • Plan for your future with 401K matching, • Take advantage of generous paid time off — including vacation, holidays, sick, personal, birthday, and volunteer days, • Dress comfortably every day with our casual dress code, • Free on-site parking for easy, stress-free commutes, • Give back with two paid volunteer days to support causes you care about, • Be recognized and rewarded through our employee appreciation and recognition programs This position is bonus eligible. At KUBRA, we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. Actual base pay will be determined based on permissible factors such as transferable skills, work experience, market demands, and primary work location. The base pay range provided is subject to change and may be modified in the future. The anticipated hourly wage range below will apply for candidates located in the following geographic area(s): New Jersey Benefits: Medical, dental, vision, life, and disability insurance, 401k contributions, 10 paid holidays, 27 days of paid time off, child/elder care reimbursement, education reimbursement and other company benefits. Equal Employment Opportunity: We are an Equal Employment Opportunity employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religion, creed, national origin, physical or mental disability, protected veteran status, or any other characteristic protected by federal, state, or local law. We will provide accommodations during the recruitment process upon request by emailing recruitment-team@kubra.com. Information received relating to accommodation will be addressed confidentially. While we value the skills and experiences listed in our job requirements, we also recognize that talent comes in many forms, and welcome applications from candidates who meet most but not all specified requirements. If you possess a strong desire to learn and grow in a dynamic work environment, apply now! KUBRA is a fast-growing company that delivers customer communications solutions to some of the largest utility, insurance, and government entities across North America. KUBRA offers billing and payments, mapping, mobile apps, proactive communications, and artificial intelligence solutions for customers. With more than 1.5 billion customer interactions annually, KUBRA services reach over 40% of households in the U.S. and Canada. KUBRA is an operating subsidiary of Hearst. Our office is small enough to allow creative individuals to flourish, yet large enough to provide long-term stability. We place a tremendous amount of responsibility on our team members to be productive, focused and self-motivated. We offer a casual work environment, competitive compensation and a stellar benefits program. KUBRA does not typically provide immigration-related assistance, including employment-based work visa (e.g. H-1B) sponsorship, work permit applications and extensions, permanent residence (green card) sponsorship, LMIA applications or permanent residency nominations. Candidates must ensure they have legal authorization to work in the U.S/ Canada. All sponsorship determinations are case by case based on business need.

Job Description • Performs all Maintenance Engineer II job duties along with any listed below., • Equipment failure decisions to stop or get a break in the process for immediate repair. Change mode till down day., • Modification or part substitution for part unavailable., • Make decision for outside service when needed, • Give proper training and guidance to lower levels. Training., • Identify quality issues. Work towards solutions. Product and efficiencies., • Work with or get application help when needed to replace or build equipment, • Understand and become proficient in all plant PM’s, • Make good labor usage and problem criteria decisions if multiple problems exist. Take charge of circumstances., • Know which issues to contact the Engineer or other management, • Must be able to trouble shoot and repair any mechanical issue pertaining to process equipment, • Must understand all normal process operations and be able to determine the problem by symptom and point of process failure., • MMI CTC knowledge of PLC hardware to field control point, operating status and hardware functions, (fault, I/O addressing, power supply, operation indicators) and actions required for symptom. Card id. Ladder logic print reading for surface level trouble shooting. ( most times external hardware failure) Safely replace bad cards., • Proficient in at least three trade skills. Plumbing, welding electrical, machine tool etc., • Become familiar with control devices such as temp controls. Burner control, and other programmable devices you may need to replace. Understand how to read technical manuals. #ZR

Job DescriptionJob Title: Injection Molding Technician Job Description The Injection Molding Technician is responsible for all aspects of the injection molding process, including machine start-up, shutdown, troubleshooting, and equipment adjustments to ensure efficient and consistent production. This role supports production by ensuring molded components meet quality standards, maintaining documentation for traceability, and performing routine maintenance. The technician also handles small-scale issues such as cleaning tools, monitoring auxiliary equipment, and ensuring machines run continuously. Responsibilities • Set up, tear down, and troubleshoot injection molding machines and related equipment., • Make necessary machine and process adjustments to maintain efficient production., • Work closely with production personnel to ensure molded components meet specifications., • Provide molded components in a timely manner to support production schedules., • Generate and maintain documentation for molding runs to ensure traceability., • Establish procedures to maintain a clean, organized, and safe work environment., • Perform routine maintenance on molding machines and auxiliary equipment., • Complete required paperwork, including routing/setup sheets and time sheets., • Collaborate with Production Manager, area leaders, programmers, and engineers to resolve molding or assembly issues., • Input and retrieve correct program codes from machines and network systems., • Support continuous machine operation by addressing small issues such as tool cleaning and auxiliary equipment checks., • Perform other duties as assigned.Essential Skills, • 2–3 years of experience in injection molding or extrusion molding., • Strong understanding of injection molding machine operation., • Experience with process control documentation., • Ability to record and maintain machine setting parameters., • Excellent organizational, oral, and written communication skills., • Basic computer skills (MS Office, email, etc.)., • High school diploma or equivalent.Additional Skills & Qualifications, • Experience operating Ranger Robots., • Bilingual (Spanish/English).Why Work Here? Join a highly collaborative and fast-paced manufacturing environment that values safety and efficiency. You'll have the opportunity to work closely with a dedicated team of production staff, engineers, and supervisors, fostering a supportive and engaging workplace. Experience the satisfaction of maintaining production uptime and contributing to high-quality production outputs. Work Environment The Injection Molding Technician works in a fast-paced manufacturing environment with continuous machine operation and frequent interaction with molding equipment, tools, and auxiliary systems. The role requires maintaining a clean, organized workspace and following all safety procedures while supporting production uptime. Technicians are frequently exposed to noise and moving machinery, heat from molding equipment, plastic materials, lubricants, and cleaning agents. The work schedule includes Thursday 1 PM to 7 PM, Friday to Sunday 7 AM to 7 PM, and Monday to Wednesday 7 PM to 7 AM, with Thursday 7 PM to 1 AM. Temporary shift coverage may be required, and flexibility with hours is appreciated. Physical requirements include the ability to lift up to 50 lbs, stand for long periods, and frequently move, transport, and position equipment. Job Type & Location This is a Contract to Hire position based out of Piscataway, NJ. Pay and Benefits The pay range for this position is $20.00 - $33.25/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Piscataway,NJ. Application Deadline This position is anticipated to close on May 29, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Packaging Supervisor-2nd Shift (JMR).BILINGUAL SPANISH SPEAKING A MUST.Global manufacturer of personal care/cosmetic/fragrance products needs someone to manage day to day packaging of fragrance products coordinating machine setup, preventative maintenance, machine repair, productivity, and projects

Under minimal supervision, performs maintenance work on machine tools, plant equipment and buildings must have the ability to work from written instructions, including manuals, drawings, sketches, schematics and/or verbal instructions to perform general maintenance tasks including but not limited to

Under minimal supervision, performs maintenance work on machine tools, plant equipment and buildings must have the ability to work from written instructions, including manuals, drawings, sketches, schematics and/or verbal instructions to perform general maintenance tasks including but not limited to

What you'll be doing?? Operate and monitor automated packaging equipment?? Perform changeovers and machine adjustments (training provided)??? Troubleshoot basic mechanical issues and support preventative maintenance?? Ensure consistent product quality and minimize downtime?? Maintain clean, safe, an

Job Description World Class Medicine. Purpose-Driven Partnership. Veritas Veterinary Partners offer exciting career opportunities in state-of-the-art facilities across the U.S. Our hospitals, open 24/7/365 and staffed by board-certified specialists, create a collaborative environment where you can work alongside like-minded, caring professionals. If you're passionate about veterinary medicine, this is your chance to thrive in a dynamic, high-quality setting. At Veritas Veterinary Partners, our mission is to build a network of trust and opportunity for veterinary professionals nationwide. We specialize in supporting Specialty and Emergency care hospitals, aligning with your unique goals and medical standards. Veritas, founded by Thomas Scavelli, DVM, DACVS, is dedicated to recruiting top-tier talent and fostering collaboration within our community. With a focus on exceptional care, we bring together highly trained veterinarians, technicians, and teammates committed to our patients' well-being. We believe in Truth in Medicine and Trust in Partnerships, ensuring we always provide the highest standard of care. Come join us and make a meaningful impact on the community you serve. Garden State Veterinary Services in Woodbridge, NJ is excited to announce we are looking for instrument technicians to join their specialty/emergency hospital. About GSVServices: We are a multispecialty practice with boarded specialists in cardiology, internal medicine, surgery, radiology, and critical care. Our clients and patients also have access to ophthalmology, oncology, radiation oncology, dermatology, and radioactive iodine treatment via our affiliated practice in Eatontown, NJ. Why GSVServices: We are not your typical veterinary hospital! We know the winning recipe to maintain the care and compassion that our patients depend upon us for, is to create a safe and supportive space for you to put your skills to use, develop new skills, and be a part of our highly collaborative, fun, and friendly team! We are proud of our company culture and positive staff engagement within a fast-paced, learning environment; and our associate employment longevity is proof of our commitment to take care of one another, and provide the highest standard of care to the patients we serve. Instrument Technicians at GSVS – Woodbridge work alongside veterinary technicians, emergency doctors, and veterinary specialists, ensuring that all instruments used for surgical procedures are clean and sterilized, operating rooms and surgery treatment area are clean and ready for use. Your role specifically ensures the safety and efficiency of surgical operations. On any given day, you can expect to do the following as an Instrument Technician: • Monitor surgery schedule to ensure all necessary equipment will be available to the surgery team that day., • Prepare OR for surgery; select appropriate packs, instruments, and materials for the procedure being performed, • Take patients to and from surgery as requested, • Clean surgical instruments after surgery, to include use of the ultrasonic cleaner and instrument milk, • Wrap surgical packs, extra instruments, and other materials for sterilization, • Use of the autoclave and gas sterilization machine and perform all routine maintenance (certification required for gas sterilizer, will provide training), • Inform supervisor of any broken or damaged equipment, • Take routine inventory of stock, • Maintain pack, instrument, and equipment lists, • Restock drawers, shelves, surgery and refill alcohol and scrub container, • Clean after any procedures in the Radiology area, keep protective gear hung up and clean, • General cleaning, sanitizing, trash removal, • Check to see that all animals have food and water (unless medically withheld), and are clean, • Clean cages and runs during the day, • Assist other areas of the hospital, as needed. About you: • At least 1 year of experience in a specialty veterinary hospital required, • Team oriented, • Motivated self-starter, • Detail oriented, • Sound problem solving abilities, • Ability to communicate with clients and all members of the veterinary team, • Positive outlook, • Excellent organizational skills, • Honesty, integrity, and a desire to have fun! Schedule: Tuesday – Saturday, 9am – 7pm Benefits: • Health, dental, and vision insurance, with HSA option- some plans paid 100%, • Maternity/Paternity leave, • Retirement Plan – 401K with employer match, • Employee Referral Bonus, • Paid Time off, • Mental health support with Talkspace, • Uniforms provided, • Full Time credentialed technicians eligible for Sign On Bonus, • Pet discounts for medical care Garden State Veterinary Services is located at 1200 Route 9, Woodbridge NJ 07095 Veritas Veterinary Partners is an equal opportunity employer. In accordance with the requirements of all applicable federal, state and local laws, we welcome and encourage diversity in the workplace regardless of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Applicants must be authorized to work in the U.S. All current positions require the ability to speak, read, and write English proficiently. Additional fluency in other languages is preferred but not required. For CA applicants please visit our Privacy Policy

Job Description At Autoland Toyota Chrysler Jeep Dodge Ram, we are committed to an environment where the customer is always treated with respect and dignity. Our associates are our most valuable resource and growth is encouraged through diligence, teamwork & creativity. Above all, there is the highest standard of honesty and integrity when conducting business. If you have an interest in automotive and a desire to develop a career in the industry, apply today! Are you experienced with basic level automotive maintenance and frustrated or bored with your current workplace? Do you want to enjoy a productive, safe, and professional environment where you can grow your career and feel good about where you work? We're looking for Oil Change/Entry Level Automotive Technicians to join our team. If this sounds like you, then come and see what we have to offer! What We Offer • Medical, Dental & Vision Insurance, • 401K Plan, • Paid time off and vacation, • Growth opportunities, • Paid Training, • Employee vehicle purchase plans, • Family owned and operated, • Health and wellness, • Discounts on products and services, • Air-conditioned shop, • State-of-the-art facility and cutting edge technology, • Shop equipped with the newest technology and equipment, • Uniforms provided, • Work environment OSHA certified to current Air Quality Standards, • Highly productive shop, • Career advancement opportunities, promote from within, • Continued education, manufacturer hands on and web based training, • Clean and professional work environment, • Competitive wages Responsibilities • Test to check whether systems and components are secure and working properly, • Isolate the systems or components that might have caused the problem, • Drive the vehicle for testing purposes, • Maintain efficiency and accuracy in diagnosing as well as repairing vehicles, • Repair or replace worn parts ahead of the vehicle’s breakdown or damage, • Use power tools, machine tools, and common hand tools to perform various tasks Requirements • Knowledge of automobiles, • Comfortable operating electronic diagnostic equipment, • High school diploma or GED; Technical degree preferred, • Minimum of 1 year in service department, • Ability to lift 50 pounds and work on your feet for extended periods of time, • Positive, friendly attitude We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Position Summary OPEX Corporation is currently looking for a full time Field Service Technician. The worker will have a high exposure level to customer service as they will be responsible for visiting our current clients to help solve their technical issues. Responsibilities • This position is responsible for the day to day maintenance, troubleshooting and repair of mail opening, document scanning and/or material handling equipment, • Installing and setting up new equipment, • Interact with the customer to determine the problem, • Completing field service reports, • Keeping the customer informed as repairs are made and answer any question that may arise., • Interact with management as well as other personnel to analyze and correct any equipment performance issues., • Completing and submitting weekly online timecards and expense report Qualifications • Associate degree in Electronics and/or equivalent hands-on job experience., • Must have excellent customer service skills., • Possessing a driver’s license, insurance and a reliable vehicle., • Ability to lift at least 25 pounds independently., • Ability to maneuver a job site, including small spaces in around our equipment., • Valid Driver’s License and vehicle for daily use. Physical/Work Environment • Due to our large variety of client’s worker could potentially conduct work in an office or warehouse environment, • Ability to work well as part of team as well as alone., • Commuting for an extended period throughout duration of shift, • Must have the ability to lift heavy machine parts while on duty, • Ability to maneuver a job site, including small spaces in around our equipment, • Squatting, bending, kneeling, reaching overhead, reaching forward will occur while on the job Benefits: • Full medical, dental and vision with low employee contribution rates, • Paid holidays, vacation and personal days, • 401k with matching and profit sharing, • Basic life insurance, short term and long-term disability, • Tuition reimbursement Company Overview OPEX Corporation is more than a manufacturer of machines. We continuously reimagine technology to power the future for our customers. With an innovative approach, we engineer unique automated solutions that support our customers so they can solve the most pressing business challenges for both today and tomorrow. Our scalable Warehouse, Document, and Mail Automation solutions improve workflow, accelerate change, and drive efficiencies in infrastructure. We are a family-owned business and operated organization with more than 1200 committed employees who innovate, manufacture, install, and service products that are helping transform industry every day. We listen to our customers, respect each other, and work together to help reimagine the future through automated solutions. At OPEX, we are Next Generation Automation. Benefits: Benefits include, but are not limited to: · Full medical, dental and vision with low employee contribution rates · Paid holidays and PTO allowance · 401k with matching and profit sharing · Basic life insurance, short term and long-term disability · Tuition reimbursement available OPEX Corporation is an Equal Opportunity/Affirmative Action Employer, without regard to race, color, religion, sex, national origin, age, disability, and protected veteran status. Company DescriptionOPEX Corporation is a recognized global technology leader in high-speed mailroom automation, document imaging, and warehouse automation equipment.OPEX Corporation is a recognized global technology leader in high-speed mailroom automation, document imaging, and warehouse automation equipment.

Job Description Coreworks is hiring immediately for a full time PORTER position. • Location: Fellowship Village - 8000 Fellowship Road, Basking Ridge, NJ 07920., • Schedule: Full time schedule. Monday - Friday, rotating weekends. 7:00 am - 3:30 pm. Further details upon interview., • Requirement: Prior carpet and floor care experience required., • Fixed Pay Rate: $17.00 per hour. WHAT'S IN IT FOR YOU A fun, people-centered work environment, a robust benefits package, and a career with one of the top hospitality companies in the nation! At Coreworks, a Compass Healthcare company, you’ll join a team that cares for each other, builds belonging, and creates real impact for those we serve. YOU'D MAKE A GREAT ADDITION TO OUR TEAM Our support services team is the core of our business. If you enjoy making a difference in the health and wellness of others, you’ll be part of a workplace where teammates hold themselves accountable, celebrate moments that matter, and lift each other up to reach new potential together. At Coreworks, we do the right thing for our clients, patients, and one another every day. Job Summary Summary: Maintains cleanliness and sanitation of the front of the house, including all tables, counters, floors, windows and beverage station. Essential Duties and Responsibilities: • Ensures tables are bussed, cleared and cleaned and floors are cleared and swept during peak service times and are prepped prior to service., • Follows safety procedures when transporting dishes and utensils from the front of the house to the kitchen area using trays, bus tubs or carts., • Washes dishes, glasses and pots; cleans cooking stations and equipment to expedite a smooth flow of service while maintaining sanitation standards., • Scrapes and rinses food from dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Keeps display equipment clean, free of debris and in compliance with all safety and sanitation standards during meal service., • Helps receive heavy deliveries from dock and transports them to assigned storage areas while observing all safe lifting standards., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. BENEFITS FOR OUR TEAM MEMBERS • Full-time and part-time positions are offered the following benefits: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identify Theft Protection, Pet Insurance, and other voluntary benefits including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program, • Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyCoreworks.pdf Coreworks is a member of Compass Group. Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Coreworks maintains a drug-free workplace.

Job Description • We are hiring immediately for full time ROUTE DRIVER - SMARTSERVICE positions., • Location: Canteen - 425 Raritan Center Parkway, Edison, NJ 08837. Note: online applications accepted only., • Schedule: Full time schedule. Wednesday through Sunday, early morning start. Hours may vary. Further details upon interview., • Requirement: Previous experience preferred. Must have a valid driver's license., • Fixed Pay Rate: $23.00 per hour. *Internal Employee Referral Bonus Available *All Canteen driving roles may include commission eligibility. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Click HERE to see a day in the life of a Canteen Route Driver! Summary: Drives company vehicle over established route to deliver products and maintain inventory. Responsible for the delivery of top-notch service to clients and customers at all times. Essential Duties and Responsibilities: • Prior to beginning each day’s route, ensures that truck is properly loaded with all product required to properly service all scheduled machines following outlined operational procedures., • Maintains proper inventory levels and product distribution for vending machines., • Loads hand cart with totes of product, walks to the machines, and loads the machines. Returns to truck with hand truck of empty totes., • Performs product rotation to ensure freshness at designated client locations for vending machines., • Provides client and customer satisfaction in every aspect of job performance., • Performs routine cleaning and sanitation of vending machines and other related equipment., • Conducts minor service and adjustments on machines. When necessary, reports defective equipment to designated maintenance repair service operators or technician dispatcher., • Maintains accurate machine product and inventory data via a handheld computer., • Informs regular clients and customers of new products or services., • Listens to and resolves service complaints; reports all client and/or customer complaints to immediate supervisor in a timely manner., • Sets up merchandise and sales promotion displays, or issues sales promotion materials to customers., • Accountable for all receipt of goods, invoices, delivery tickets, cash received or collected, and product., • Conducts inventory reconciliation in accordance with established procedures., • Keeps company vehicle clean and organized at all times; performs pre- and post-trip vehicle inspections., • Performs other duties as assigned. Qualifications: • 3 years driving experience required., • Valid driver's license, ensuring safe operation of company vehicles in accordance with traffic laws and conditions., • Preferred 1-2 years’ experience in a customer service position, or a minimum of 1 year of related experience., • Must be able to lift 50 lbs. on a consistent basis. Associates at Canteen are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyCanteen.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. Req ID:1525458 Canteen

CEVA Logistics - 266 Old New Brunswick Road - Responsibilities: Lead staff and provide work direction on the 2nd shift; Operate forklift and handle heavy/oversized pieces; Coordinate receipts, storage and distribution of materials; Prepare and assemble orders and move materials between operations or

Plastipak - - Responsibilities: Operate propane forklift to transport raw materials and finished goods between the warehouse and production areas; Use RF scanning device to scan goods; Perform Cycle Counts & Inventory Audits using SAP; Track & log inventory activity using Excel spreadsheets; Load f