Trabajos machine maintenance en White Plains, New YorkCrear alertas

Persons employed as a GSE Mechanic is expected to: • Inspect and maintain ground support equipment used in operations., • Troubleshoot, repair and/or overhaul ground support equipment., • Check and service ground support equipment with fuel, water, oil and hydraulic fluid., • Diagnose problems using test equipment and applicable manuals., • Build and assemble machines or mechanical components according to requirements., • Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues., • Conduct repairs aiming for maximum reliability., • Perform thorough maintenance on machinery, equipment and systems., • Clean and apply lubricants to machinery components., • Replenish fluids and components of engines and machinery., • Provide consultation on correct maintenance and preventative measures to machine or vehicle users., • Keep logs of work and report on issues, • Completion of GSE paperwork as required. Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert). The following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines). • Frequently lift and/or move up to 75 pounds., • Read, write and fluently speak and understand the English language., • Ability to read and comprehend instructions, short correspondence and memos., • Write routine business correspondence., • Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees., • Deal with problems involving several concrete variables in standardized situations., • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals., • Excellent knowledge of machinery and hydraulic, electrical and other systems and their components, • Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers), • Ability to follow established procedures and practices and read instruction, blueprints etc., • A strong commitment to all health and safety guidelines, • Very good communication skills, • A problem-solving ability, • Very good physical strength and stamina To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. • High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience, • Minimum of 18 years of age, • Ability to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies., • Must be legally authorized to work in the country of employment., • Prior GSE or heavy equipment experience preferred., • Must have your own tools., • Must possess valid driver’s license., • Certification from a vocational school or completion of apprenticeship is a definite plus., • Valid certification (ASE) preferred. Pay ranges vary based on multiple factors, including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, and travel. The pay starting rate for this position is 26.00/ hour, per the collective bargaining agreement. Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status. With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • Medical/prescription drug, dental, and vision Insurance, • Health Savings Account, • Flexible Spending Accounts, • Life Insurance, • Disability Insurance, • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Paid Maternity Leave, • Tuition reimbursement, • Training and Development, • Employee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial, and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling, and environmental services, while keeping focus on employee, customer, and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: Facility MRF Control Panel Operator at Newark MRF facility plays a vital role in the recycling process by operating various recycling machines inside MRF facility. This position emphasizes attention to detail, and a commitment to safety while working in a dynamic environment. The role is designed for individuals who are eager to learn and grow within the recycling industry, contributing to the company's sustainability efforts Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Understanding of MRF Facility operations and Facility material flow., • Understanding and ability to operate MRF equipment control panels, • Communication via 2-way radio to other MRF control panel operators, supervisors and operators., • Understanding and proficiency in Lockout/Tagout (LOTO), • Follow company safety procedures and enforce safety policies., • Ability to climb ladders up to 10’, • Ability to clean and follow daily machine maintenance and cleaning guidelines Requirements and Qualifications::, • Must be able to work inside and outside, lift 50 lbs,. High school diploma required. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $17.00/Hr. Salary Range Maximum: USD $17.00/Hr.

Job DescriptionSalary: 15.69 CLIENT SERVICES TEAM Greenwich, CT Reports To: Studio Manager Employment Status: Part Time/Non-Exempt KEY RESPONSIBILITIES • Greet and engage clients in a positive and friendly manner, • Provide the highest level of client/customer service and hospitality to all clients/prospective clients, • Share pricing and class information with prospective clients, • Deliver Megaformer machine demos to new clients, • Complete studio tours with new clients, • Work alongside and support SLT instructors to ensure a successful and seamless client check-in and class experience, • Ensure complete knowledge of Mariana Tek system, • Assist Management with day-to-day operations of the studio, • Ensure prompt response to studio emails; notify Studio Manager if needed, • Understand SLT product knowledge, policies and procedures for retail operations, • Complete basic Megaformer machine maintenance, • Actively maintain studio cleanliness and organization between each class so each client receives the best SLT experience, • Assist in retail inventory at the end of the month, • Complete opening and/or closing checklists, • Perform other studio duties as needed QUALIFICATIONS • Mariana Tek software experience a plus, • Leadership experience a plus, • Must have superior customer service skills, • Must have excellent interpersonal skills and a service-oriented outlook, • Must be highly organized, • Ability to work independently as well as on a team, • Should have a strong ability to communicate clearly with team members, clients and senior management, • Must be able to move and/or lift heavy items, up to 50 lbs. WORK REQUIREMENTS • Must be available to work:, • Minimum of three shifts per week; minimum 4 hours each, • Ability to work flexible hours; early morning/late night/ weekends, • Some holidays (open year-round) SLT actively seeks a diverse applicant pool in order to build the strongest possible team. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job Description Want a rewarding job that offers the pay and benefits you deserve? Join us at Easy Ice! We’re a growing company that provides an all-inclusive commercial ice machine subscription to business owners nationwide. We’ve been changing our industry for the better since we started in 2009, and we’re not slowing down anytime soon. As a member of our team, you’ll be helping restaurants, bars, hospitals, hotels, and other businesses get the ice they need without spending a fortune or stressing out. We’ll invest in your professional development and overall quality of life because we know employee satisfaction is key to our success. Easy Ice doesn’t just want to be the #1 commercial ice machine solution in America—we also want to be one of the best places to work. Easy Ice continues to grow and seeks a bright, highly motivated Work Order Specialist to join their team in the Mamaroneck market. In this role, the Work Order Specialist is responsible for providing timely and accurate review and documentation of work orders received from our service providers. Ongoing technical training will be delivered by the Technical Services Board to ensure work order review captures any work orders not in compliance with Easy Ice SOP expectations. Responsibilities: • Assist with customer requests, • Deliver exceptional customer service, • Distribute/Filter customer service emails daily, • Review and processing of work orders, In compliance with Easy Ice technical SOP, based on tech notes and pictures, • Create and distribute Preventive Maintenance work orders to service partners, • Review Preventive Maintenance invoices, • Reschedule Preventive Maintenance work orders, as needed, • Monitor adherence to Maintenance Plan schedule, • Responsible to consistently increase technical knowledge, • Maintain customer and service provider contact lists, • Escalate any work orders needing additional attention or service needs, • Update and clean up customer information within Salesforce, • Back-office administration and paperwork, • Other duties and responsibilities as required Qualifications: • High School Degree or Equivalent, • 5 years Customer Service or equivalent experience preferred, • Intermediate level of technical aptitude, • Team oriented, • Self-starter, • Detailed oriented and high level of accuracy delivered, • Ability to multitask effectively, • Proficient in Microsoft Office Suite, • Ability to perform effectively in a fast-paced environment, • Work primarily in a climate-controlled environment with minimal safety/health hazard potential, • Sedentary, sitting, walking, occasional lifting (overhead, waist level) from floor, bending, frequent near vision use for reading and computer use, • Prolonged periods of time sitting Benefits: • Excellent Medical/Dental/Vision/Group Life, • 401k Company Match, • PTO and Holiday Pay, • Fitness Membership Reimbursement, • Provide all Tools needed to complete the job The above statements are intended to describe the general nature and level of work performed by people assigned to this classification. They are not intended to be an exhaustive list of all job duties performed by the personnel so classified. Easy Ice is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and pregnancy-related conditions), gender identity or expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, genetic information or any other characteristic protected by applicable federal, state or local laws.

Job DescriptionSalary: $16.50 per hour CLIENT SERVICES TEAM Rye Brook, NY Reports To: Studio Manager Employment Status: Part Time/Non-Exempt KEY RESPONSIBILITIES • Greet and engage clients in a positive and friendly manner, • Provide the highest level of client/customer service and hospitality to all clients/prospective clients, • Share pricing and class information with prospective clients, • Deliver Megaformer machine demos to new clients, • Complete studio tours with new clients, • Work alongside and support SLT instructors to ensure a successful and seamless client check-in and class experience, • Ensure complete knowledge of Mariana Tek system, • Assist Management with day-to-day operations of the studio, • Ensure prompt response to studio emails; notify Studio Manager if needed, • Understand SLT product knowledge, policies and procedures for retail operations, • Complete basic Megaformer machine maintenance, • Actively maintain studio cleanliness and organization between each class so each client receives the best SLT experience, • Assist in retail inventory at the end of the month, • Complete opening and/or closing checklists, • Perform other studio duties as needed QUALIFICATIONS • Mariana Tek software experience a plus, • Leadership experience a plus, • Must have superior customer service skills, • Must have excellent interpersonal skills and a service-oriented outlook, • Must be highly organized, • Ability to work independently as well as on a team, • Should have a strong ability to communicate clearly with team members, clients and senior management, • Must be able to move and/or lift heavy items, up to 50 lbs. WORK REQUIREMENTS • Must be available to work:, • Minimum of three shifts per week; minimum 4 hours each, • Ability to work flexible hours; early morning/late night/ weekends, • Some holidays (open year-round) SLT actively seeks a diverse applicant pool in order to build the strongest possible team. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Job DescriptionJob Title: Industrial Mechanical Technician – Class A Department: Engineering Reports To: Maintenance Manager / Chief Engineer Location: Strike Force Staffing Employment Type: Full-Time or Part-Time Availability: Open Availability Required Number of Openings: Salary Range: Competitive Work Environment: Exposure to extreme temperatures (hot/cold); food handling environmentJob Summary:The Industrial Mechanical Technician is responsible for providing mechanical and electrical maintenance support at SFS client facilities. This role focuses on preventative maintenance, troubleshooting, equipment repair, and supporting system installations to ensure safe, reliable, and efficient plant operations. Technicians are assigned to client sites based on their weekly availability and may work across multiple facilities depending on operational needs. Key Responsibilities: • Diagnose and repair mechanical, electrical, pneumatic, and hydraulic issues on various types of production equipment., • Perform scheduled preventive maintenance and inspections on equipment to ensure reliable operation., • Use CMMS (Computerized Maintenance Management System) to manage work orders and maintenance logs., • Inspect, repair, and replace machine components such as bearings, filters, wiring, valves, switches, and gauges., • Interpret electrical/mechanical blueprints and schematics to troubleshoot systems., • Adjust and calibrate control instruments and functional components., • Start, test, and monitor machines to ensure proper performance after maintenance or repair., • Support production uptime by responding to emergency breakdowns and participating in on-call coverage., • Document maintenance activity and communicate effectively across shifts to ensure continuity., • Maintain a clean and safe workspace, complying with OSHA standards, GMP practices, and internal food safety protocols., • Contribute to the continuous improvement of maintenance systems and processes., • Follow all company safety rules, procedures, and PPE guidelines at all times.Qualifications & Skills:, • Associate degree in Mechanical Engineering or equivalent technical training (preferred but not required)., • Minimum 3 years of experience as an industrial maintenance technician in a manufacturing environment., • Strong mechanical and electrical troubleshooting skills up to 480V., • Ability to read and interpret mechanical and electrical schematics., • Familiarity with bakery or food processing equipment is a plus., • Proficient in Microsoft Word, Excel, and Outlook., • Strong verbal and written communication skills., • Willingness to work flexible hours and overtime as needed., • NY Boiler License is a plus, but not required.If you're a hands-on maintenance professional with a passion for keeping production running at peak performance, we want to hear from you. Join a team where your skills make a direct impact every day.

The Melting Pot - 30 Mamaroneck Ave - [Busser / Kitchen Staff / FT & flexible PT schedules available] - As a Dishwasher @ The Melting Pot, you'll: Perform dish machine set-up and maintenance; Use proper pre-soaking procedures, cleaning fondue pots, cleaning fondue forks, and following proper chemica

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Be an ambassador that prioritizes the success of E Tech Group, our clients, and the Careers of our associates. You have: • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • A DNA comprised of collaboration and teamwork. We are seeking Application Knowledge in: • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • HMI Programming using one or more of Rockwell FTView ME and SE, Wonderware System Platform, Inductive Automation Ignition You may have: • MQTT, understanding of server architecture Benefits & Perks: • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off., • Learning and growth are key parts of the E Tech culture. We provide you with training and continuing education from day one, so you can advance your career. As an E Tech associate, you can unlock your greatest potential through challenges and opportunities. E Tech Group is an Equal Opportunity / Affirmative Action Employer. Applicants are considered for employment without regard to race, color, religion, sex, age, disability, military status, genetic information, gender identity, sexual orientation, citizenship status, or any other basis prohibited by law. E Tech Group will provide reasonable accommodations to qualified individuals with disabilities and for religious beliefs.

Job Description Our Assistant Manager (ACSM) is responsible for leading our front of house team on creating an exceptional guest experience and ensuring all EWC Growth core values are consistently applied. As a member of the center leadership team, you will partner with the Center Sales Director to drive KPI's + sales through guest acquisition, retention, retail product sales, and team development. This is a full time, hourly position. Responsibilities: • Helps with personnel management, which includes training, scheduling, and coaching associates, • Schedules shifts and helps facilitate weekly or monthly Strut or one on one meetings, • Reviews daily employee timesheets and submits for payroll processing, • Monitors, evaluates, and helps maximize customer service delivery and customer satisfaction, • Administer check-ins and check-outs as required., • Process guest payments, refunds, and appointment requests as required., • Organize the Reservation Book based on Guest requests and Associate availability, • Responsible for educating all guests on benefits and savings of Wax Passes and consistency with waxing which will result in package sales., • Helps develop and implement the store marketing program, • Assists with inventory (retail and COGS) and reviews all inventory counts on a weekly and monthly basis., • Helps oversee Center maintenance, including cleanliness, safety, and organization, • Onboards and trains all new Guest Service Associates, • Co-Leads Strut sessions with Center Manager, • Responsible for weekly bank deposits and reconciliation of cash received, • Ensure all areas of the Center, including storage room and desk are neat, clean and organized, • Performs other duties as assigned Requirements • 2+ years of management experience, preferably in a retail environment; Key Holders strongly encouraged to apply, • Knowledge of POS systems, • Knowledge of Computerized Scheduling Systems, • Excellent interpersonal and communication skills including written communication, • Strong organizational skills with the ability to work in a fast-paced environment, • Ability to operate machinery such as a copy or fax machine, • Prolonged periods of sitting at a desk and working on a computer., • Must be able to lift 15 pounds at a time Benefits • Compensation: $19-$23 per hour (determined based on experience) + monthly commission based adjusted sales, • Medical, Dental, and Vision insurance, • 401k plan, • Life Insurance policy, • Paid parental leave, • Complimentary waxing services at any of our centers! EWC Growth participates in E-Verify. All offers of employment are contingent upon the successful completion of the E-Verify process.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. Demonstrating a willingness to help others and be a team member Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. Provide voice of Customer feedback. Through service and Customer relationships, build brand dedication. Conduct travel and work in a safe manner, constantly learning new technology and soft skills. Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: Proficient verbal and written communication and Customer relation skills. Able to interact and effectively communicate in person and over the phone with customer and co-workers. Present a professional image. Must be adaptable to changes and able to deal with change, delays, or general work-related issues. Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. Basic mechanical and logical solving skills are a must. Rational decision making and problem-solving skills. Work Environment Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance 3+ Weeks’ Vacation to Start 10 Company Paid Holidays 401(k) retirement plan with company contribution Tuition reimbursement Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Must be highly mobile, able to access all areas of the premises. Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. Ability to sit for prolonged period of times. Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. Ability to frequently use hands and arms. Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1437B - White Plains, NY

Job Description • We are hiring immediately for a full time PORTER position., • Location: Morgan Stanley - 2000 Westchester Avenue, Purchase, New York 10577. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. More details upon interview., • Requirement: Prior porter experience is preferred. Willing to train!, • Perks: 401(k), medical benefits, paid vacation, and sick pay!, • Pay Range: $19.00 per hour to $25.00 per hour. We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1518172. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg This position is eligible for an Employee Referral Bonus! If you know someone that is qualified for this role, please use the ‘job search’ in PeopleHub to refer your referral and email them a link to apply. Your referral will be able to apply by clicking the link in the email. You can check the status through your profile, accessible via Careers in PeopleHub, by clicking on ‘referral tracking.’ For Employee Referral guidelines, FAQs and the Compass Employee Referral Policy, email MyReferral@compass-usa.com. Become part of Restaurant Associates, the industry’s leading provider of dining and event catering for some of the nation's most prestigious museums, performing arts centers and corporations! Voted Glassdoor's Employee Choice Awards- Best Places to work This is R/A ! Job Summary Summary: Maintains cleanliness and sanitation of the front of the house, including all tables, counters, floors, windows and beverage station. Essential Duties and Responsibilities: • Ensures tables are bussed, cleared and cleaned and floors are cleared and swept during peak service times and are prepped prior to service., • Follows safety procedures when transporting dishes and utensils from the front of the house to the kitchen area using trays, bus tubs or carts., • Washes dishes, glasses and pots; cleans cooking stations and equipment to expedite a smooth flow of service while maintaining sanitation standards., • Scrapes and rinses food from dishes and washes them by hand or places them in racks or on conveyor to dishwashing machine depending on assigned equipment. Ensures complete cleanliness and sanitation., • Keeps display equipment clean, free of debris and in compliance with all safety and sanitation standards during meal service., • Helps receive heavy deliveries from dock and transports them to assigned storage areas while observing all safe lifting standards., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates at Restaurant Associates are offered many fantastic benefits. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program In addition, full-time positions also offer the following benefits to associates: • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program, • Flexible Spending Accounts (FSAs) Abides by all Company policies and procedures including but not limited to: • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyRA.pdf About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act.

Job DescriptionDescription: Summary/Objective A Head Barista is responsible for upholding the standard of quality of the Bluestone Lane coffee and beverage program within their home store. The Head Barista is a positive influence over other baristas and strives for the highest of standards in drinks, local interactions, attitude and brand ambassadorship. The Head Barista acts as a role model in their own drink quality, local interaction and food preparations while also taking significant responsibility for on the job training and education of their teammates in store. The Head Barista is responsible for all aspects of the coffee menu in full in their assigned store as well as strong support for their relevant manager. This role follows the Steps of Service to maximize sales while providing a high level of customer service. The Head Barista serves our locals and runs drinks to tables Monday through Friday. The Head Barista is a cross-functional role and rotates off the machine with responsibility for POS and take-away orders working alongside their Server Teammates. Positioning: The Head Barista is cross-functional and positioned either behind the machine when assigned, at the POS, or on the on the café floor so that they are accessible and within eyes reach of our local Essential Functions/Responsibilities: Ownership: ? Store level extension of Education team; coffee/beverage quality and processes gatekeeper for café ? Teamwide holistic education and training of coffee product & coffee/beverage program ? Face of Bluestone Lane coffee to locals & teammates ? Manages coffee related equipment and tool cleaning and maintenance (daily cleaning and periodic maintenance) ? Inventory management of coffee and coffee-related product Spend through Service: ? Deep understanding of the menu in order to educate and excite local ? Services tables with focus on upselling food & beverage. Keen eye to refill beverage at right time ? Comes around the machine to personally deliver drinks to locals ? Engages and attend Monthly Head Barista meetings ? Upskills teams and initiates training and accreditation requests for teammates when needed Head Barista – Cafes 07.2019 Page 1 of 3 happiness ambassador – fair go – ride the wave - mateship ? Out of LA and NY – One senior HB to facilitate accreditations upholding BL coffee quality and hospitality philosophies. ? With Manager, responsible for upskilling team and initiating training and accreditation requests when needed ? Train, educate and acclimate new baristas into store and BL system Human Connection: ? Serves as Teammate rotating off machine to run POS, serve locals, clear tables & process takeaway ? Locals focused, interacting and servicing locals with beverage needs ? Sets tone in store with recognition and connection with locals – name, face & order every time ? Builds relationships and human connection through personalization and conversation ? Provides input to GM/Ops in selection and hiring of new baristas ? Attends regular calibration sessions with Education team (1 every 6-8 weeks, ability to travel may be needed) Premium Broad Product: ? Contributes to and builds upon innovations which assist workflow and operations in store and speed of service ? Zenput inputs such as monthly staffing reports to Education team, monthly coffee and process audits & ownership of store achieving correct extraction via daily dial in ? Focus on coffee, beverage product and workflow systems of each barista within the team while providing a positive influence in upholding BL standard of hospitality. ? Coffee product rotation, ordering and quantity management following standard operating procedures (i.e. coffee used within 3 weeks of roast for beverage preparation, Retail coffee no older than 7 days on shelves) ? Minimizes waste – ensure proper ordering Beautiful Spaces: ? Ensures bar and workspace are always clean and fully functioning ? Speed of service – provide quality product with speed and accuracy ? Maintains grooming guidelines as all times ? Shift leader who assists General Manager to direct and manage live labor; ensures operational excellence in absence of GM Measures of Success: ? Cross-functional operations -flexible and agile moving from machine to serving local – service focused and quality driven ? Baristas in training are ready for test within 30 days of employment ? Pipeline of Baristas ready for accreditation ? Knows locals’ name & order – provides genuine escape by delivering great service ? Good communication & working environment with Servers – working together to service local efficiently and effectively ? Consistent coffee quality from all baristas in the café ? Reduces coffee waste Requirements:

Aerotek - - Responsibilities: Load, unload, and transport materials within the plant, yard, and designated work areas; Operate forklifts and other material handling equipment safely and efficiently; Use MRP system and WMS software to track inventory movement and update material records; Read work o

The Maintenance Technician facilitates home maintenance services in our members' homes by handling routine tasks, addressing client requests, and proactively spotting potential issues. A seasoned handyman or maintenance professional with a background in residential home building and/or maintenance.

Order all approved maintenance-related products and supplies for repairs and on-going maintenance. The Maintenance Supervisor will:. Perform a wide variety of building maintenance and mechanical work including carpentry, electrical, plumbing, interior and exterior painting, masonry, drywall repair,

Experience in the area of facility sanitation and minor maintenance repairs. Ability in new construction as well as building repair/maintenance. Accountable to the Coordinator of the Facilities Maintenance Department.

Nesco Resource - - Responsibilities: Operate sit-down, counterbalanced electric forklifts for unloading and eventually loading trucks; Use RF scanners to track inventory and verify product placement; Accurately match long serial numbers and follow staging protocols; Ensure correct placement of mate

M - - Responsibilities: Collaborate with a work center team to meet production goals and objectives; Maintain high quality standards as determined through quality specifications; Ensure you own safety and the safety of others by following all Safety rules and policies; Support production processes

EverLine Coatings and Services is a premier line painting and maintenance company that proudly has a location in Your City. We provide high-quality line painting and pavement maintenance services for parking lots, roadways, parkades, and warehouses. Our Pavement Maintenance Technicians utilize our s

Managing the facility maintenance schedule and coordinating activities with internal departments and external contractors. Experience in using a maintenance software. Title: Facility Maintenance Technician.

Ability to speak, read, write and interpret documents in English such as safety rules, operating and maintenance instructions and procedure manuals.

Extra Space Storage - - Responsibilities: Assist in construction, installation, and maintenance projects for storage unit facilities.

The main function of a maintenance supervisor is to establish, implement, and maintain long-range plans for improvement of maintenance activities and provide technical assistance to the manufacturing departments supported. A typical maintenance supervisor is responsible for the effective use of pers

Responsibilities: Safely operate walk-behind stackers and other material handling equipment in close-quarters, high-traffic areas; Receive, transfer, stage, and move raw materials, packaging, and finished goods; Wrap, label, and inspect finished products to ensure quality; Use SAP to process invento

Nesco Resource - - Responsibilities: Follow all safety procedures and participate in safety initiatives; Perform inspections and ensure product quality within tolerances; Keep machines running accurately and efficiently; make minor adjustments or repairs; Replenish raw materials and remove finished

Maintenance Mechanic at WMC Health, you'll: Perform maintenance and repair tasks on hospital equipment and facilities; Ensure compliance with safety regulations and standards; Diagnose and troubleshoot mechanical issues; Collaborate with other departments to address maintenance needs; Maintain accur

Work across multiple machine types including CNC, robotics, and automated systems. Maintenance Technician – Manufacturing. We are seeking a skilled Maintenance Technician to join a growing precision manufacturing company supporting a wide range of industries including automotive, medical, and adva

This role is responsible for preventive maintenance, troubleshooting, and repair of CNC machinery and facility equipment in a fast-paced production environment. Accurately document time, materials, and maintenance activities. Experience performing preventive and corrective maintenance.

You will oversee maintenance technicians, coordinate building improvements, and manage apartment turnover schedules to ensure units are completed on time and to a high standard. Supervise and support maintenance technicians. Coordinate repairs, preventative maintenance, and improvements.

Accountable for proper maintenance and repair of all plant/buildings and grounds equipment to include, troubleshooting, preventive maintenance and predictive maintenance. Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic co

Manages maintenance of machinery so that it is running as safely as possible. The position supports production efficiencies by managing the maintenance and repair of all processing machinery, equipment, and supporting systems. Provides ongoing training to new team members, complex management and pro

Make a global impact-join Repligen.We're united by a mission to inspire advances in bioprocessing as a preferred partner in the production of biologic drugs that improve human health worldwide.No matter your role or background, at Repligen, you will play a key part in shaping some of the most innova

A seasoned handyman or maintenance professional with a background in residential home building and/or maintenance. Hassle Free Home Services was born out of a realization that homeownership came with its share of surprises - a never-ending to-do list, constant maintenance, and unexpected upgrades. O

Safely operate forklifts or other machinery (chainsaw) in order to complete assigned tasks including loading and unloading, moving, staging, pulling orders and transporting material.

Assist with preventative maintenance and equipment adjustments.

They will be responsible responsible for keeping the equipment in good operating condition by performing preventive maintenance, machine tests, troubleshoots, removing technical issues, and performing emergency repairs. Effectively support the Preventative Maintenance (PM) program with a goal of con

Location: Hawthorne, NY (on-site).Clarapath is a medical robotics company based in Westchester County, NY, dedicated to transforming and modernizing laboratory workflows.Our mission is to improve patient care by increasing efficiency, reducing costs, and enhancing the quality and consistency of labo

Ability to speak, read, write and interpret documents in English such as safety rules, operating and maintenance instructions and procedure manuals.

Perform routine preventative maintenance programs, follow established standards and guidelines. Previous maintenance or related experience, hotel experience preferred. Maintenance Technician - Residence Inn Orangeburg.

Knowledge of building maintenance or construction, including painting or patching is preferred.

Perform light maintenance of electrical systems (replace light bulbs and sockets, replace broken switches etc.

The Maintenance Technician Level B performs independent diagnostics, repairs, and preventive maintenance on MRF processing equipment while mentoring Level C technicians and supporting safe, reliable operations. Perform PM inspections and corrective maintenance to standard. Experience in industrial m

In this role, under minimal supervision, the Maintenance Mechanic will perform troubleshooting, repair, modification, installation, and preventative maintenance on packaging and process equipment, utilizing standard work practices to ensure production is completed in a safe and efficient manner. Com

Title: Facility Maintenance Technician. Performing inspections, diagnostics, troubleshooting, preventative maintenance, corrective repairs, and system checks on company facilities and equipment. Managing the facility maintenance schedule and coordinating activities with internal departments and exte

This includes loading and unloading materials from delivery vehicles, operating forklifts and other machinery, and ensuring that all materials are stored correctly and efficiently.

General maintenance experience includes painting, drywall, plumbing, electrical, mowing, plowing, etc. Notifies Maintenance Supervisor and Property Manager of all problems and potential issues of concern. Maintenance Technician; $24 per hour plus Bonus Program.

Ability to speak, read, write and interpret documents in English such as safety rules, operating and maintenance instructions and procedure manuals.