Machine shop jobs in Hempstead, New YorkCreate job alerts

Job DescriptionMUST BE LOCAL TO MERRICK!Benefits/Perks • Vacation Days, • Competitive CompensationPlease Note:If you do not have 5 years or more experience please do not apply. This is mandatory, we are a very busy shop and cannot train someone with no experience. Additionally if you do not have a drivers license please do not apply this is also a requirement. Detailer Responsibilities, • Perform vehicle inspections pre and post-detailing, • Clean the interiors and exteriors of vehicles using approved products and procedures, • Relocate vehicles to various locations within the body shop., • Moving vehicles in and out of the shop.Qualifications, • 5 Years Minimum of previous experience as a Car Detailer is required, • Valid Drivers License is required, • High level of attention to detail, • Strong interpersonal communication skills, • Ability to meet the physical requirements of the position, including extended periods of walking, bending, and standing, • Strict adherence to company policies and service standards, • Speak, read, and write EnglishPolisherResponsibilities, • Polish, buff, and restore the exterior finish of vehicles, • Remove scratches, blemishes, and dirt, • Apply waxes, polishes, dyes, and reconditioners, • Prepare surfaces for buffing by sanding, cleaning, and masking, • Match factory paint textures, • Inspect vehicles for damage, • Follow safety proceduresQualifications, • 5 years or more experience is required, • Valid drivers license is required, • Ability to speak, read and write English is a must, • Confidence using tools and materials, • Attention to detail, • Ability to perform physical activities like lifting, climbing, and balancing, • Ability to use hand toolsAdditional tasks, • Apply ceramic coats, • Repair or replace machine parts, • Fit boot spoilers, mud flaps, or side skirts, • Disassemble and reassemble machines or equipment, • Collect and test cleaning solutions or vapors

Job Description All around machinist tool and die person needed. Milling and lathe work mostly. A good knowledge of most machines in a machine shop is helpful. This position is part of a team and will incorporate design to manufacture. Must be able to read from prints and do simple set ups. Have your own tools and be able to work independantly. Ability to sharpen drills and lathe tools if necessary. Good problem solving skills. Mechanically inclined Overtime is available. Company DescriptionLooking for any and all manufacturing people. Machinist , Tool & Die CNC and operators. Excellent opportunities.Looking for any and all manufacturing people. Machinist , Tool & Die CNC and operators. Excellent opportunities.

Job Description Our New Hyde Park shop is looking for a Machinist (manual lathe) to join the team. You will perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Monday - Friday, 7 AM - 3:30 PM. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler, • Ability to machine housings, shafts, keyways, and sleeves, • Must be familiar with common industry tolerances and fits for motor repair, • Fabricate products to meet established quality standards and the requirements of our customers, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain personal and shop tools and equipment, • Willing and able to work OT as required Machinist Necessary Qualifications • Manual Lathe experience required, • 5 years' mechanical assembly and disassembly experience, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions Salary Commensurate with Experience (Range between $22 - $38/hour) Benefits • Health insurance (medical, dental, vision), • 401K, • PTO Program and Paid Holidays We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. The Power-Flo Technologies family of companies include United Electric Power, Aetna Electric, Long Island Electrical Distributors, Electric Switchboard Solutions, Misa Plumbing, Axis NJ LLC, Power-Flo Pumps and Systems, US Energy Group, Dittman and Greer, AAI, United-Richter, Twinco, Nassor Electric

Job Description Precipart. located in Farmingdale, NY, is looking to hire skilled and experienced Machinists to set up and operate CNC machines in our state-of-the-art facility featuring versatile machining capabilities, including: Lathe, Swiss Turning, Milling, Grinding, and Gear Cutting. We're looking for career focused Machinists with experience in any of these machining areas to help us craft high-quality components that support our customers in the medical, aerospace, space and industrial markets. Our machinists are the makers of cutting-edge components that will impact the lives of many. At Precipart, we engineer possible. From the needle on the first Gramophone, to helping mankind explore Mars, to pioneering parts for robotic surgery, we’ve helped propel the human race forward for five generations. With our unique combination of engineering, design and manufacturing expertise, we’ve worked with our clients to turn possibilities into possible. Join us in driving human progress through engineering! • Our Machinist career growth path has four distinct tiers, from Entry Level, Class C, Class B, to Class A. Each tier is designed to build upon your skills and experience, providing targeted development and increasing responsibilities to help you achieve your professional goals., • Our renovated facilities is equipped with state of the art equipment and is temperature controlled providing a comfortable environment that is focused on quality, safety and 5S., • We offer two work shifts, 1st (7:00am to 3:30pm) and 2nd shift (3:00pm to 11:30pm which includes a 10% shift differential)., • Set up and run up to two machines to fabricate precision parts, • Load and unload parts in the machine, • Start the machining cycle, • Inspect dimensions of finished pieces, • Change tooling as needed, • Hold tight tolerance of +/- .0002, • Experience setting up and operating CNC machines to fabricate precision components. We welcome candidates of all experience levels to apply. The hiring class and compensation for this role will be determined through our assessment process, taking into account your skills, experience, and qualifications. Additionally, the final level will be based on the business needs at the time of hire., • Should demonstrate interest and aptitude in this line of work, • Relevant technical Associate degree or CNC Machining certificate is preferred for candidates with minimal work experience, • Experience fabricating precision parts, • Experience working to very close tolerances (+/- .0002), • Experience with reading blue prints for mechanical components, • Experience inspecting parts and using inspection tools, • Good aptitude for shop math, • Experience with changing live tooling, • Able to work in a fast paced environment and meet production schedule, • Maintain a clean, organized and safe work area, • Able to stand for duration of shift and lift up to 40lbs WHAT WE'LL OFFER YOU IN RETURN:- • Base salary plus incentive program, • Paid time off, • Employee Referral Bonus, • Medical, dental, vision insurance, • Flexible Spending Account, • Health Savings Plan, • Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans, • 401k Profit sharing plan, • Tuition Assistance, • National Employee Assistance Program, • 529 College Savings Program, • Professional development and training, • Clean and organized workspace and manufacturing facilities, • Company events and outings Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you “engineer possible”. You should be proficient in: • GD&T, • CNC Tooling, • Brake & Suspension Systems, • G-Code, • Machine Setups for Production Runs, • CNC Mill (3-4 axis VMC) (Fanuc, Mazak, Haas, Kitamura, Dmg Mori Seiki), • CNC Lathe (2-4 axis) (Mazak, Okuma, Doosan, Dmg Mori Seiki, Nakamura), • CNC Swiss Lathe (Star, Citizen, Tsugami, Tornos), • CNC Lathe (5+ axis) (Nakamura), • Gear Machinery (Fellows, Gleason) $20 - $46 / hr

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Looking for highly motivated individuals with experience in sheet metal fabrication, sheet metal bending using manual break, manual pan brake, shear machine, press etc. MUST have 5 years of proven experience. Candidate must have technical background Understanding basic electrical and plumbing is a plus! Clean driver's license Full Time position with good salary and benefits. Please submit a resume. We will consider a shop helper as well, must be handy with skill to operate tools. Master Chef Mobile Kitchens inc is a subsidiary of Mobility Services Inc. who's been in business for over 30 years, Master Chef Mobile Kitchens Inc. specializes in manufacturing innovative custom food trucks & kitchen trailers. As well as custom fabrication of, shipping container kitchens, marketing and promotion trucks and trailers, mobile office trucks, and much more 10 Years in business and fast-growing operation recently relocated to Nassau County Long Island. (Spanish Version) Se busca una persona altamente motivada con experiencia en la fabricación de chapa, doblado de chapa con rotura manual, rotura manual de bandeja, cizalla, prensa, etc. DEBE tener 3-5 años de experiencia probada. El candidato debe tener experiencia técnica ¡Entender los conceptos básicos de electricidad y plomería es una ventaja! Licencia de conducir limpia Puesto de jornada completa con buen sueldo y prestaciones. Envíe su currículum. Ayudante de tienda: debe ser hábil con habilidad para operar herramientas. Master Chef Mobile Kitchens inc. es una subsidiaria de Mobility Services Inc. que ha estado en el negocio por más de 30 años, Master Chef Mobile Kitchens Inc. se especializa en la fabricación de innovadores camiones de comida personalizados y remolques de cocina. Además de la fabricación personalizada de cocinas de contenedores de envío, camiones y remolques de marketing y promoción, camiones de oficina móviles y mucho más 10 años en el negocio y operación de rápido crecimiento recientemente reubicados en el condado de Nassau Long Island. Powered by JazzHR KvOuOrZT2j

Job Description Join the Pit Crew: Automotive Parts Specialist Wanted! Are you the type of person who loves to organize, coordinate, and keep things running like a well-oiled machine? We're on the hunt for a Parts Assistant who can keep the shop humming, parts flowing, and vehicles moving. This is a fast-paced, behind-the-scenes role that keeps our technicians productive and service advisors focused on what they do best: taking care of customers. What You'll Be Doing: Parts Maestro: * Receive, check, and label incoming parts with precision. * Match parts to the correct repair orders and stash them where they belong. * Communicate quickly if something's backordered, missing, or just plain wrong. * Handle returns, cores, and warranty claims like a pro. * Keep the parts area neat, stocked, and ready for action. Dispatch Dynamo: * Schedule and dispatch drivers for parts runs and shuttles. * Track deliveries and pick-ups to make sure everything's on time. * Keep the driver schedule organized—board, sheet, or software, your choice. Loaner Vehicle Captain: * Check in and out loaner cars like a valet with superpowers. * Track mileage, fuel, and overall vehicle condition. * Coordinate cleaning, fueling, and maintenance so every ride is smooth. Team Sidekick: * Assist advisors and technicians with parts requests on the fly. * Jump in on shop errands or admin tasks related to parts and fleet. * Keep communication flowing with managers and the service team. What You Bring to the Team: * A knack for organization and attention to detail. * Ability to multitask without breaking a sweat. * Great communication and teamwork skills. * Valid driver's license and clean driving record. * Bonus points: automotive or warehouse/parts experience. Why You'll Shine Here: * Technicians always have the right parts at the right time. * Service advisors stay focused and stress-free. * Loaner vehicles are always ready to roll. * Drivers run on time, every time. The Perks: * Monday – Friday schedule – enjoy your weekends off! * Base pay: $20–23/hr (DOE) * Small performance bonuses tied to efficiency * Healthcare perks – 40% of health insurance covered, plus dental and vision after 90 days * Paid holidays – because everyone deserves to celebrate! * PTO that grows with you: * 1 week in your first year * 2 weeks from years 2–5 * 3 weeks after 5 years If you're ready to take on this exciting challenge and be the parts guru we need, apply today! We can't wait to meet you.

Job DescriptionTop Job Located in Freeport, NY Salary: $25.00 Job Functions: • Assist in problem solving with company software., • Preventative Maintenance Management: Schedule and log preventative maintenance tasks, order required fluids and parts, and maintain related spreadsheets. Ensure upkeep of cutting fluids and gear-cutting hob maintenance., • Tooling and Consumables Management: Monitor stock of drills, endmills, and other common tools. Implement and sustain Kanban stocking methods to ensure availability and reduce downtime., • Job Entry and Administrative Support: Create jobs in ERP, prepare travelers, prints, and inspection reports, and issue order acknowledgments using established templates. Maintain organized Excel spreadsheets and support company software problem solving., • Purchase Order and Vendor Tracking: Track delivery status for outsourced components and outside services, coordinating with vendors to ensure timely completion., • Shop Scheduling and Tasking: Assist with basic scheduling by physically moving jobs to designated work centers and helping assign weekend crew tasks to maintain production flow., • Fixture and Process Support: Provide assistance with simple fixture designs and collaborate with engineering on straightforward process improvements., • Material Management: Support inventory accuracy through periodic counts, audits, and reconciliation of materials., • Create and issue Purchase Orders for third party services and consumable goods Knowledge and Skills Required: • Strong computer proficiency, especially in Microsoft Excel, • Ability to read and follow written and verbal instructions with accuracy., • Strong organizational skills with attention to detail in recordkeeping, logs, and inventory management., • Effective communication and interpersonal skills for cross‑department collaboration., • Willingness to learn new systems and proactively solve problems in a dynamic environment. Preferred knowledge and skills but not required • Familiarity with Lean Manufacturing and Six Sigma practices, • Experience with ERP systems like Jobboss and Prophet 21, • Previous experience in a machine shop supervisory role, • Certification in machining or manufacturing technology ##2127OS Express Office: Farmingdale 565 Broadhollow Road Suite 9E Farmingdale, NY 11735

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Writer. This position is responsible for assisting the Service Department with customer service needs, opening & closing of work orders, activities in pre-delivery of new equipment, repair and reconditioning of the new and used trade-in equipment, daily operations of shop functions, field service function and delivery or vehicle functions. What You’ll Do • Advise customers on technical problems, scheduling customer service needs, planning assigned jobs to work orders containing job information and specifying job instruction, identifying customer and machine, • Assist in the appraisal and quotes of repair work coming into the shop and discuss with the Service Manager the service required, both in parts and labor, • Schedule shop assignments, field service work, and truck requirements for pickup and delivery of equipment, • Process warranty claims, • Establish or adjust work procedures to meet schedules and deadlines., • Opening and closing of work orders to ensure timely closing to meet company goals, • Supervises all shop activities when the Service Manager is away from branch, • Proactively seek and participate in available company-sponsored training, to develop and advance knowledge base and skill set, • Ability to use standard desktop load applications such as Microsoft Office and internet-based functions, • Positive attitude, • Excellent oral communication and written skills, • Strong organizational skills, • Provide robust customer service to internal and external customers, • 1 year of experience in Service Department operations The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job DescriptionBenefits: • Competitive salary, • Competitive Compensation, • Great Work Environment, • Career Advancement Opportunities, • Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary, • Abide by and maintain all safety procedures as required by OSHA, • You are responsible for keeping the center equipment in full working order, • Fully understand how to operate all bowling equipment in the center, • Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed, • Take charge and ensure the shop and machine area is clean and organized, • At least 1 year of Mechanical experience, • High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional), • Excellent communication skills, • Ability to train new mechanics, • Availability to work nights, weekends, holidays, and extended workdays, • Proven team player

Job Description We are seeking a part time possibly full time Embroidery Machine Operator to join our team! You will help with operational activities and ensure excellent quality control. Responsibilities: • Coordinate embroidery machine operations and run 2, 4 or 6 head Machines, • Troubleshoot and resolve issues in a timely fashion, • Load and unload equipment and materials, • Provide innovative solutions to improve plant efficiency, • Conduct routine preventive maintenance on the plant, • Previous experience in plant operations or other related fields, • Familiarity with plant tools and equipment, • Strong troubleshooting and critical thinking skills, • Ability to handle physical workload, • Ability to thrive in a fast-paced environmentCompany DescriptionA Family run business started in 1989 specializing custom printed apparel, athletic sportswear and team uniforms. We have a production shop and showroom on Main St in Port Washington conveniently located near Restaurants, shops and the Long Island Railroad station.

Job Description At Power-Flo Technologies, we look for resourceful and forward-thinking people who deliver results. We are committed to being the premier provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for you to join our collaborative team as an experienced Control Technician. This is a full-time, field technician position. Monday - Friday, 7 AM - 3:30 PM. Control Technician Responsibilities • Troubleshooting electrical control panels in the field including HVAC, Pumps, and Machines., • Start up and commissioning of variable frequency drives and soft starters., • Testing of electrical panels in our UL 508 control panel shop., • Performing preventative maintenance on customer equipment. Control Technician Qualifications and Skills • Experience with Electrical Machine, Motor, and/or Pump troubleshooting., • Field service background., • Experience with boiler controls a plus., • Experience with programming Variable Frequency Drives and Soft Starters., • Experience reading electrical diagrams for industrial control panels., • Must have clean and valid NYS drivers license to operate company vehicles. Salary Range: $26 - $45 based on experience and skills Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • 401K We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Join Precipart in Farmingdale, NY, as a talented CNC Equipment Specialist. We seek individuals with expertise in setting up and operating cutting-edge CNC machinery such as Lathes, Swiss Turning, Milling machines, Grinders, and Gear Cutting tools. Our state-of-the-art facility caters to industries like medical, aerospace, and industrial markets. You'll be part of a team that fabricates top-tier components that advance human progress. Our machining journey spans generations, from creating the first Gramophone needle to contributing to Mars exploration. Be part of our legacy of turning ideas into reality with engineering excellence. • Career Path: Navigate your professional journey from Entry Level up to Class A, with structured growth designed to hone your skills and responsibilities., • Work where quality and safety converge in our temperature-controlled facilities., • Flexible work shifts: 1st (7:00am to 3:30pm) and 2nd (3:00pm to 11:30pm) with added shift differential., • Relocation bonus for those moving to the area. Responsibilities, • Handle and operate up to two machines, ensuring precision fabrication., • Engage in loading, unloading, and initiating the machining cycles., • Inspect and verify the dimensions of finished products., • Adjust tooling to ensure tight tolerance of +/- .0002., • Demonstrable experience with CNC machine setup and operations for precision tasks. We encourage applicants at all experience levels., • Technical flair and a keen interest in machining., • Desirable: Technical Associate Degree or CNC certification for less experienced individuals., • Proficient in fabricating meticulously precise components., • Accustomed to working with minimal tolerances (+/- .0002)., • Blueprint reading proficiency., • Skilled in inspection tool utilization., • Solid foundation in shop math and live tooling., • Ability to thrive in a dynamic production environment., • Fosters a clean, organized, and safe workspace., • Physical capability to stand for long periods and lift up to 40 lbs., • Incentive program complementing base salary., • Comprehensive insurance packages including medical, dental, and vision., • Financial wellness through 401k, profit sharing, and tuition assistance., • Career development and a positive, organized workspace. Proficiency in: • GD&T, • CNC Tools & Technologies, • Production Cycle Management, • Precision Blueprint Interpretation

Job DescriptionDescription: Machinist Assistant We are seeking a skilled and detail-oriented Machine Assistant to join our Machine Shop team. In this role, you will be responsible for operating a variety of machine tools and specialized machines. This is an excellent opportunity for individuals with technical aptitude and a commitment to precision and safety in a dynamic production environment. Key Responsibilities • Set up and operate machine tools and special purpose machines., • Monitor machine operations to ensure they are functioning correctly and producing parts within specified tolerances., • Adjust machine settings as needed to maintain quality and efficiency., • Inspect finished products for defects and ensure they meet quality standards., • Perform routine maintenance and troubleshooting on equipment to minimize downtime., • Follow safety protocols and maintain a clean and organized work area., • Record production data and report any issues to supervisors promptly. Skills and Qualifications • Proven experience operating machine tools, special purpose machines, or industrial robots in a manufacturing setting., • Strong understanding of metalworking processes and specifications., • Ability to read and interpret technical drawings and work instructions in English., • Good mechanical aptitude and troubleshooting skills., • Attention to detail and commitment to quality., • Ability to work independently and as part of a team., • Basic computer skills for recording data and operating control systems. Join our innovative team where safety, quality, and continuous improvement are at the core of our culture. We offer opportunities for growth, competitive compensation, and a supportive work environment dedicated to your professional development. Requirements: Duties/Responsibilities • Able to perform Machine Shop Operator functions., • Tool operator, familiar with machine shop tools., • Lifts work piece manually or using hoist and secures work piece in fixture or loads automatic feeding device., • Inspects and measures machined work pieces to verify conformance to specifications., • Moves machine controls and guides to adjust machine., • Replaces worn machine accessories such as cutting tools or brushes., • Adds coolant to machine reservoir and turns valve to start flow of coolant., • Excellent verbal and written communication skills, with proven ability to clearly communicate with engineering, technical support, sales, and management., • Thorough understanding of products and equipment used in manufacturing., • Excellent organizational skills and attention to detail., • Excellent time management skills, with proven ability to meet deadlines., • Strong analytical and problem-solving skills., • High school diploma or equivalent required., • 401K, • Flex Scheduling, • Health, Dental and Vision, • Health Saving Account, • Life Insurance, • Disability Benefits, • While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms., • The employee must frequently lift and/or move up to 35 pounds.

Machine Shop Supervisor Role with Global Industry Leader / $120,000-$150,000 + Bonus Based on Experience / Room for Growth and Great Benefits.

Facility has a shop, tankwash, drivers lounge which includes Keurig machine, microwave, toaster, vending machines, refrigerator. Multiple drivers with 25+ years tenor. Our Average REG Company Drivers pay: $2000+.

Bowlero - JobID: 55658 [Maintenance Technician] As a Mechanic at Bowlero, you'll: Keep the pinspotters/pinsetters and other bowling equipment in proper working order; Abide by and maintain all safety procedures; Ensure that the shop and machine area are always clean and organized; Follow preventativ

Job Description Job Title: Machine Operator (Press Brakes, Shear Machine, CNC Turret Punch Press) Company: Power-Flo Technologies Location: New Hyde Park, NY Job Type: Full-Time Reports To: Shop Manager Power-Flo Technologies is seeking an experienced Machine Operator to operate and maintain our press brakes, shear machine, and CNC turret punch press. The ideal candidate will have a strong background in metal fabrication and the ability to produce precise and accurate parts while adhering to PFT’s safety and quality standards. Schedule: This is a full-time position. Monday – Friday, 7 AM – 3:30 PM. Salary Range: $18 - $27/hour Benefits: Health insurance (medical, dental, vision), 401K, PTO Program and Paid Holidays Essential Responsibilities • Set up and operate the press brakes, shear, and CNC turret punch press to produce parts according to specifications, • Monitor machine operation making adjustments as needed to ensure quality and efficiency, • Adhere to safety protocols at all times, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise and troubleshoot machine issues as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Willing and able to work OT as required Necessary Qualifications • Previous machine operating experience in a manufacturing setting, • Ability to read mechanical prints and schematics, • Ability to work both independently and in a team setting, • Basic knowledge regarding use of a PC, • Mechanical aptitude, • Attention to detail and commitment to producing high quality work, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor Requirements Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor

Job Description Impact Printz is a growing apparel customization company known for our quality, creativity and customer service. We are looking for an experienced Embroidery Specialist to join our team. Job Description: We are seeking a skilled and experienced embroiderer who is familiar with a print shop environment, particularly with imprinting techniques and knowledge of machine operation. Responsibilities: Embroidery Production -Manage and operate the Barudan Embroidery machine to produce high-quality embroidered products. -This includes setting up machines, loading designs, thread changing; as well as, hooping clothing, hats and various other products to be embroidered. Skills: -Proficient in using embroidery software for digitizing designs. Knowledge of various embroidery techniques and materials. Reliability: -Ability to manage time effectively and meet deadlines in a fast paced environment. What We Offer: -Competitive salary based on experience -Opportunities for growth within our growing company, including Full-Time work -A creative and supportive work environment. How to Apply: If you are passionate about embroidery, thrive in a production setting, please send your resume and a cover letter detailing your experience to . We look forward to seeing how your skills can contribute our team. Note. This position requires on-site work at our facility located in Garden City South, NY

Job Description Gift Shop Assistant Per-Diem The Parker Jewish Institute, located in New Hyde Park, NY, is seeking a per-diem Gift Shop Assistant with a strong customer service and retail background, to join our team of professionals in our retail Gift Shop, located in the lobby level of our nursing home. Position Overview * Assists in purchasing and maintaining adequate stock and supplies for the Gift Shop * Coordinates the New York State Lottery game sales for the Parker Gift Shop * Responsible for selling lottery games and is responsible for assisting with ordering supplies as needed, maintaining stock of games, insuring that self-serve terminal is stocked and operable at all times * Maintains and supervises adequate number of volunteer sales staff * Responsible for working with the Finance Department to insure the accurate reporting of sales, deposits and any other required documentation in a timely manner About Parker The Parker Jewish Institute for Health Care and Rehabilitation, conveniently located on the Queens-Nassau County border in New Hyde Park, New York, is a non-profit health care facility that offers inpatient programs such as sub-acute/short term rehabilitation, long-term care and nursing home care, as well as community health services encompassing certified home health care and a comprehensive community hospice program that serves terminally ill patients in their own homes or in nursing facilities, including Parker's nursing home. Quality care means hiring quality people, and Parker Jewish Institute for Health Care and Rehabilitation has a longstanding reputation for excellence and innovation in resident and patient care. Why Work at Parker * Friendly, collaborative team environment and exciting career growth opportunities providing an opportunity to learn, grow and have an impact on the overall results * Excellent training and clinical education * Accessible via public transportation * Free parking on site for all staff * On-site cafeteria offering breakfast and lunch Position Requirements * Experience working in retail; minimum 2 years preferred * Availability to work weekends and holidays * High School Diploma or equivalent * Ability to work cooperatively with the volunteer workforce, work well under pressure, and be respectful of others, friendly, courteous and well mannered * Physical ability to stand most of the day and carry equipment and supplies weighing 25 pounds • New York State Lottery machine experience preferred but not required. Job Posted by ApplicantPro

Job Description Gift Shop Assistant Full Time Now hiring for weekdays Sundays through Thursdays The Parker Jewish Institute, located in New Hyde Park, NY, is seeking a Gift Shop Assistant with a strong customer service and retail background, to join our team of professionals in our retail Gift Shop, located in the lobby level of our nursing home. Position Overview * Assists in purchasing and maintaining adequate stock and supplies for the Gift Shop * Coordinates the New York State Lottery game sales for the Parker Gift Shop * Responsible for selling lottery games and is responsible for assisting with ordering supplies as needed, maintaining stock of games, insuring that self-serve terminal is stocked and operable at all times * Maintains and supervises adequate number of volunteer sales staff * Responsible for working with the Finance Department to insure the accurate reporting of sales, deposits and any other required documentation in a timely manner About Parker The Parker Jewish Institute for Health Care and Rehabilitation, conveniently located on the Queens-Nassau County border in New Hyde Park, New York, is a non-profit health care facility that offers inpatient programs such as sub-acute/short term rehabilitation, long-term care and nursing home care, as well as community health services encompassing certified home health care and a comprehensive community hospice program that serves terminally ill patients in their own homes or in nursing facilities, including Parker's nursing home. Quality care means hiring quality people, and Parker Jewish Institute for Health Care and Rehabilitation has a longstanding reputation for excellence and innovation in resident and patient care. Why Work at Parker * Friendly, collaborative team environment and exciting career growth opportunities providing an opportunity to learn, grow and have an impact on the overall results * Excellent training and clinical education * Accessible via public transportation * Free parking on site for all staff * On-site cafeteria offering breakfast and lunch Position Requirements * Experience working in retail; minimum 2 years preferred * Availability to work weekends and holidays * High School Diploma or equivalent * Ability to work cooperatively with the volunteer workforce, work well under pressure, and be respectful of others, friendly, courteous and well mannered * Physical ability to stand most of the day and carry equipment and supplies weighing 25 pounds • New York State Lottery machine experience preferred but not required. Job Posted by ApplicantPro

Job Description Fitter/Tailor: NYC, Long Island, NY, Hoboken, NJ & Greenwich, CT alts | Alteration Specialists is looking for a Fitter/Tailor We are looking for a dynamic professional Fitter/Tailor, distinguished by their charisma, technical prowess, and professional integrity. This role will include fittings, sewing on the machine, building client relationships and supporting the tailor shop manager. This is a full time role in New York City, Brooklyn, Long Island, Hoboken, NJ and Greenwich,CT with salary, full benefits, and opportunities for future growth. Responsibilities Client Relationship Management and Fittings • Maintain a professional, warm, welcoming studio environment, • Conduct Fittings according to the Alteration Specialists Standard, • Build relationships with clients, influencers, brands and stylists, • Demonstrate that you are meeting personal production targets, • Constantly be evaluating processes that are not efficient and come up with solutions to better optimize our organization, • Inform front desk of all re-alterations, • You are a skilled communicator. You’re both a great listener and an effective speaker and writer. You treat sensitive information with respect and discretion., • You are respectful, compassionate, and empathic. You have a calming demeanor and a way of building trusting, caring relationships with ease., • You are mission driven. You are motivated to help change the fashion industry, and move towards a more sustainable future and serve as an excellent ambassador for a cause you believe in., • You are systematic. You derive pleasure from being highly organized, creating order, and checking things off your list., • You are detail-oriented. You take pride in delivering beautifully altered garments and you meticulously check work for accuracy., • You are thoughtful. You can anticipate the needs of your tailoring team and clients, and feel committed to proactively creating a supportive environment for all. You are able to recognize how your individual role feeds into the larger organization’s objectives., • 7-10 years of alteration tailoring experience required, • 2-3 years of general fitting experience required, • 1 year of fitting both men's and women's garments required Why the Role is Compelling As the Fitter/Tailor for an Alts team, you would play an integral role in creating a welcoming and professional environment that has a profound impact on some of the most important events and days in a client’s life. You would establish rewarding relationships with the studio’s clientele and partner community, and serve as an expert talent for any alteration jobs that walk into the studio. You would feel the support of a tight-knit tailoring and operations team, and the excitement of being part of a growing, multi-studio operation disrupting the fashion industry with many opportunities to grow as quickly in your career as the brand is growing. Alts is committed to working with and fairly rewarding the best talent in the industry. We believe in treating people right - through fair compensation and benefits, comprehensive training, thoughtful management and specific attention to growth and development of our staff. Compensation Range is from $18/hour- $35/hour* Standard/Basic Tailors are between $18-$24/hour Intermediate from $25-$30/hour Advanced $30-35/hour *This is based on skill level and classification of tailoring work Powered by JazzHR 8CPO1YqwDm

Job Description Transitional Services for New York, Inc., not-for profit, is a comprehensive, community-based mental health organization located in New York City. We provide a continuum of rehabilitative services to enrich the lives of those recovering from mental illness and facilitate their transition to increased levels of independence. Transitional Services for New York, Inc. envisions broadening its rehabilitative services and becoming a regional social service provider. Transitional Services for New York Staff will deliver effective programs with compassion, integrity, and professionalism. We expect all staff to put our clients’ needs first while respecting ourselves and each other as we provide hope to those who participate in our programs. Counselor (Mental Health) $22 Per Hour, Part-time TSINY, a non-profit Mental Health Services Agency seeks Counselor for its Residential Program, located in Queens Village, NY. Valid Driver License Required Position Summary Provide direct care services to assigned caseload. Work hands on with residents on learning daily living skills, such as personal hygiene, laundry, budgeting and room maintenance. Accompany residents on medical and benefits appointments and off-site recreational activities. Meet with caseload individually for weekly sessions. Conduct clothing inventory and shop for seasonal clothing. Essential Functions • Converse with shift going off duty for any pertinent information, i.e., appointments, overall residents’ behaviors, changes in medication, etc., • Supervise morning, afternoon and evening medication. Initial medication book immediately after each individual medication is given to a resident., • Alert day programs of resident's absence and lateness if resident has an appointment. b. receipt of correct number of residents in the residence c. count correct number of charts in the file d. location of Agency vehicle e. correct number of house keys f. receipt of valuables in the house, i.e., TV, VCR, copy machine, etc. • Check staff revised schedules., • Check personal mailbox., • Assist residents with meal preparation when needed., • Report any pertinent information regarding residents and facility to shift supervisor throughout your shift., • Document in Communication Log any pertinent information regarding residents., • Meet with assigned caseload as scheduled., • Document all sessions on progress notes., • Maintain residents’ charts in accordance with Agency and OMH requirements and standards., • Meet with supervisor as scheduled., • Meet with all caseload residents to discuss all outstanding and ongoing issues., • Ensure all caseload residents have sufficient medication., • Escort residents to appointments if assigned (check appointment book or calendar)., • Escort residents shopping for personal needs., • Write Medicaid Progress Notes reflecting restorative services., • Begin status change form immediately upon hospitalization or other change of status and forward to Program Director, IDF Unit., • Visit hospitalized residents weekly., • Participate and supervise residents during fire drills., • Participate in Community Meetings., • Participate in staff meetings., • Complete quarterly ADL assessment for all caseload residents., • Participate in quarterly service plan review assessment and development., • Thoroughly inspect assigned residents' rooms for safety measures and report any damages or problems to shift supervisor., • Escort residents to Social Security office., • Escort residents shopping for new clothing (fall/winter and spring/summer)., • Functional assessment completed., • CPR/First Aid training, • Check to see that all of assigned residents have had their annual physical and dental check-ups., • Submit receipts for petty cash spent., • Inform residents of appointments., • Conduct and document room checks as needed., • Attend special on-site and off-site training, seminars, conferences, etc., • Check revised schedules for possible changes in hours/shifts and for holiday coverage., • Assist residents in completing Home Leave forms., • Make sure residents are dressed appropriately before leaving the facility., • Supervise kitchen activities (cooking, serving, clean-up) to ensure safety, health and cleanliness, as needed., • Assume Med/Shift Supervisor responsibilities as scheduled/needed., • Be able to sit or stand as needed, with or without reasonable accommodation., • May require walking, primarily on a level surface, for short periods throughout the day, with or without reasonable accommodation., • Be able to reach above shoulder heights, below the waist or lift as required to file documents or store materials throughout the workday, with or without reasonable accommodation., • Driver’s license required., • During a declared disaster, assume and adhere to assigned Job Action role(s) consistent with Disaster Preparedness Plan., • Perform other related duties as required. Experience/Education/Skills/Abilities High School diploma. TSINY is an equal opportunity employer that is committed to a policy of nondiscrimination in accordance with Title VII of the Civil Rights Act, as well as the New York State Human Rights Law. TSINY prohibits discrimination against any employee or applicant for employment on the basis of race, creed, color, national origin, sex, gender, age, disability, marital status, sexual orientation, citizenship status, veteran status or other protected group status as provided by law in all employment decisions.

Fast Growing Premier Builder seeking an Project Manager!.This Jobot Job is hosted by: Kelly Anne Wight.Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume.Salary: $90,000 - $120,000 per year.Great opportunity for a Milwaukee Construction Project Manager to join a