Trabajos maintenance electrician en Orange, New JerseyCrear alertas

Job Description Join LAPP as an Industrial Controls Electrician LAPP is a family-owned innovator in cable and connection technology, founded in 1959 and headquartered in Stuttgart. With 5,800 colleagues across 80+ countries, we blend entrepreneurial spirit with long-standing values. At our Florham Park, NJ site, you’ll find a hands-on culture that prizes initiative, flexibility, and personal responsibility in a family-friendly environment where ideas are welcomed. What a day looks like You start your morning walking the production floor, reviewing overnight maintenance logs and checking preventive tasks. A line goes down—your diagnostics quickly isolate a sensor input issue in a PLC-controlled station. You restore operation, document the fix, and collaborate with production and engineering to prevent recurrence. Later, you pull new conduit for a 480V three-phase drop, swap a failing VFD, and support a machinery relocation. Safety is second nature—LOTO every time—and you end the day closing PMs and suggesting reliability improvements. What you’ll take on • Troubleshoot and repair motors, drives, PLC I/O, sensors, and control circuits on production machinery., • Execute scheduled preventive maintenance on plant electrical systems and equipment., • Respond to breakdowns and emergencies to minimize downtime., • Replace electrical components (relays, switches, motors, circuit breakers) as needed., • Install and commission new machines and electrical equipment to spec and code., • Assist with equipment moves and facility layout changes., • Upgrade and retrofit systems for greater safety, reliability, and efficiency., • Run conduit and pull wire for 120V/220V/480V circuits; work with 480V distribution and 11kV–480V transformers., • Interpret electrical schematics, blueprints, wiring diagrams, and technical manuals., • Accurately document maintenance, repairs, and modifications., • Partner with maintenance, engineering, and production to resolve issues., • Offer reliability insights and recommend improvements., • Adhere to safety protocols, including lockout/tagout, and company policies; comply with NEC and local codes., • Keep your work area organized and participate in safety and continuous improvement initiatives., • Comfortably work at heights of 20–30 ft using a scissor lift when required. What you bring, • High school diploma or equivalent; associate degree in electrical technology (preferred)., • 3–5 years in industrial electrical maintenance., • Strong command of 480V three-phase power, motor controls, and PLCs (Allen-Bradley, Siemens)., • Ability to read and interpret electrical schematics and technical drawings., • Hands-on with test equipment: multimeters, megohmmeters, clamp meters, etc., • Solid understanding of NEC and OSHA requirements., • Journeyman electrician license., • Experience with VFDs and servo systems; familiarity with industrial networks and automation systems., • Welding or mechanical aptitude a plus., • Proficiency with 120/208/240/480 voltage systems. Competencies, • Foundational electro-mechanical skills., • Clear communicator with strong interpersonal skills, work ethic, and a positive mindset., • Safety-first: consistently follows OSHA and company safety policies., • Plans, prioritizes, and uses time effectively., • Quality-focused; self-monitors for accuracy., • Respectful collaborator who upholds organizational values., • Accountable and ownership-driven., • Meets productivity targets and seeks continuous improvement., • Reads mechanical/electrical prints; uses power tools and multimeter/amps meter., • Basic machining (drilling/tapping). Communication, reasoning, and tools, • Language: Read/interpret electrical and mechanical drawings; speak effectively to groups (customers/employees). Fluency in written and spoken English required., • Math: Add, subtract, multiply, divide using whole numbers, fractions, and decimals., • Reasoning: Solve practical problems with limited standardization; interpret written, oral, diagrammatic, or schedule-based instructions., • Computer: Working knowledge of Lotus Notes and Microsoft Office., • Travel: None required., • Supervisory responsibilities: None. Machines & technologies you’ll use, • Variable Frequency Drives (VFDs), • Programmable Logic Controllers (PLC) — Allen-Bradley, Siemens, • Servo motors Compensation & benefits Base salary: $90,000–$95,000 plus participation in LAPP's bonus plan. Benefits: Medical, Vision, Dental, Paid Time Off, Paid Holidays, 401(k), HSA/FSA, Life Insurance, and more. After thorough market analysis, LAPP considers experience, knowledge, skills, abilities, and other factors when determining base salary. Legal and policy notices LAPP is an Equal Opportunity Employer WORK ENVIRONMENT:The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to risk of electrical shock. The noise level in the work environment is usually moderate. The employee must be able to tolerate conditions associated with no air conditioning or heat. PHYSICAL DEMANDS:The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk; sit and reach with hands and arms. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description URGENTLY HIRING HIGH VOLTAGE ELECTRICIANS FOR A LEADING AEROSPACE COMPANY! Pay: $38 - $40 Location: Dover, NJ Shifts: 2nd, 3rd, and weekend (apply for details) Responsibilities • Perform electrical repairs and preventative maintenance on site equipment and electrical systems to minimize downtime and maintain safe operations., • Locate and repair electrical failures and malfunctions on equipment such as heaters, elements, fuses, lights, contacts, and related components., • Repair and install electrical systems and equipment including motors, transformers, wiring, alarm systems, automatic control systems, and industrial controllers., • Rebuild motors, including replacing bearings and servicing armatures, to restore proper functionality., • Understand and apply electrical schematics and blueprints to troubleshoot electrical systems, programmable logic controllers (PLCs), and associated automated systems., • Work with robotic controllers, pneumatic and hydraulic modules, and electromechanical sensing devices as part of automated system maintenance and repair., • Perform new electrical installations based on schematics and blueprints, including pulling wire, bending conduit, and completing electrical wiring and terminations., • Install, wire, and troubleshoot PLCs and variable frequency drives (VFDs) as part of industrial automation systems., • Assist in training less experienced electrical personnel by sharing knowledge of troubleshooting techniques, safety practices, and equipment operation., • Communicate effectively with equipment operators to explain programs, system status, and required actions to ensure proper equipment use., • Maintain frequent internal contact with manufacturing teams to coordinate work, and external contact with contractors and suppliers as needed for projects and repairs., • Properly complete and adhere to all safety procedures and training requirements established for maintenance personnel., • Perform all duties of an A Electrician when necessary to support operations and maintenance needs.Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $73840.00 - $73840.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Benefits: You will be eligible to participate in the Companys employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: 3% of your eligible compensation regardless of whether you contribute to the plan, and 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Companys Vacation Policy, in addition to Company recognized holidays. Job Type & Location This is a Permanent position based out of Clifton, NJ. Application Deadline This position is anticipated to close on Oct 23, 2026. Workplace Type This is a fully onsite position in Clifton,NJ. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Company Description MDC ELECTRICAL CONTRACTOR LLC is an established electrical contracting company based in Harrison, New Jersey, serving clients throughout the greater Newark area and beyond. The company provides a range of electrical services, including installation, maintenance, and project-based contracting for commercial, industrial, and residential customers. MDC ELECTRICAL CONTRACTOR LLC focuses on reliable workmanship, safety, and code-compliant solutions that meet client schedules and budgets. Team members have the opportunity to work on diverse projects and contribute to the company’s continued growth in the region. Role Description The Electrical Project Manager is a full-time, on-site role located in Newark, NJ, responsible for overseeing electrical projects from initial planning through completion. In this position, the individual coordinates project schedules, manages budgets, and supervises field teams and subcontractors to ensure work is completed safely, on time, and within scope. Day-to-day tasks include reviewing electrical designs and drawings, organizing materials and labor, monitoring project progress, and resolving technical or logistical issues that arise on site. The role also involves communicating with clients, inspectors, and internal stakeholders, maintaining accurate documentation, and ensuring compliance with relevant codes, standards, and company policies. Qualifications • Strong knowledge of electricity and practical experience in electrical contracting., • Ability to review and oversee electrical design in coordination with electrical engineering principles., • Proficiency in project budgeting, cost control, and financial tracking for electrical projects., • Experience managing field crews, subcontractors, and scheduling in a construction or contracting environment., • Familiarity with local and national electrical codes, safety regulations, and inspection requirements., • Effective communication, organization, and problem-solving skills, with attention to detail and documentation., • Prior experience as an Electrical Project Manager, Foreperson, or similar role in the electrical industry preferred., • Relevant technical training or degree in electrical engineering, construction management, or a related field; licensed electrician or equivalent certification is a plus.

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Beverage Manufacturing Plant Mechanic - Irvington, NJ Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics _.Seeking Plant M

ArcPoint Electrical Solutions Inc.This is a full-time, on-site Electrician role based in the New York City Metropolitan Area.The Electrician will perform installation, testing, maintenance, and repair of electrical systems and equipment in commercial, industrial, and critical facility environments.D

(Essential Functions) These are functions a qualified incumbent or applicant must be able to perform with or without reasonable accommodation. Troubleshoot, repair, and maintain production equipment and electrical systems. Install and maintain wiring Electrician, Plant, Equipment, Manufacturing, Maintenance, Electrical

Junior Industrial Electrician 1st Shift $28$30/hr. Sims Metal is seeking a motivated Junior Industrial Electrician to join our maintenance team at our Jersey City scrap metal recycling facility. This is an excellent opportunity for someone with basic electrical experience who wants to develop thei

Gpac is partnering with a highly established manufacturing leader with over 60 years of industry success to confidentially hire an experienced Manufacturing Electrician to join its collaborative maintenance team.This is a hands-on, highly technical role designed for a skilled technician who enjoys s

Technical school diploma or equivalent level of knowledge plus a minimum of five (5) years of progressively more responsible experience as an electrician, at least three (3) years of which shall have involved taking the lead in the installation, repair, and maintenance of electrical systems. The pri

Job Description General Summary We are seeking a maintenance worker to assist the superintendent in maintaining the physical integrity of the property. This involves insuring a safe, secure, and comfortable living environment for residents, visitors and staff. The maintenance worker will carry out assigned duties in a safe manner and other duties as requested by the Superintendent. Essential Job Functions/Responsibilities: A building maintenance worker must possess a variety of skills encompassing most of the construction trades, handling that require basic skills as an electrician, carpenter, plumber, mechanic, painter, HVAC technician and roofer, as well as be able to perform all the responsibilities of a porter, should the situation warrant. The building maintenance worker must always remain aware of their limitations and request the services of a professional when the worker’s lack of expertise requires it. Maintenance workers might touch up paint in the lobby, repair a faulty house lock, troubleshoot an open electrical short and replace a faucet, carry an extension ladder, use a 14-pound sledgehammer, all in the same day. • Plumbing: includes the repair, replacement or installation of faucets, pipes, toilets, garbage disposals, dishwashers, water-dispensing refrigerators, and washing machines., • Electrical: includes the troubleshooting, repair, replacement or installation of power switches, fuses, wall sockets, ceiling lights, and ceiling fans., • Drywall/Plaster repair: includes filling in small holes caused by nails and minor dings from normal wear and tear most performed between the time a tenant vacates a unit and a new renter assumes occupancy., • Painting: includes minor touch-ups following damage repair and new coats of paint applied to unit walls between the time a tenant vacates a unit, and a new renter assumes occupancy., • Appliance repair: includes the repair, replacement or installation of major household appliances, such as refrigerators, dishwashers, range ovens, washers and dryers, and air conditioners., • Grounds keeping includes mowing grass, pulling weeds, trimming and pruning trees and shrubs, watering lawns and plants, replacing light bulbs along pathways and parking areas, sweeping or raking leaves, and tidying up bark or other ground covering., • Cleaning/housekeeping includes maintaining a tidy appearance in shared community locations, such as the leasing office lobby, clubhouses, and fitness or recreational areas. Also includes cleaning fixtures, floors and other surfaces in vacated units before new renters assume occupancy., • Snow removal: includes shoveling, blowing or plowing snow away from covered walkways and driveways, and laying down rock salt atop icy surfaces to prevent slipping., • Customer service: includes professional, prompt and courteous correspondence with renters when scheduling and providing maintenance services, and with contracted vendors that provide additional facility services., • Time management: includes maintaining an organized scheduling and tracking system, usually on a computer, to effectively complete all maintenance requests in a timely manner and in the order by which they were received or by level of urgency., • Represent the Company in a professional manner as reflected by personal appearance, attention to detail, jobsite cleanliness, customer service and safety., • Document and record all work, purchases, deliveries, accidents, and any other related items in a timely, professional manner., • Respond to emergencies as needed including nights and weekends, being on-call with a cell phone., • Record all inspections and related maintenance on appropriate forms in an accurate and timely manner., • Prioritize all work to minimize vacancy loss, prevent property damage, and provide service to residents., • Inventory Control: Be knowledgeable of inventory levels of spare parts and supplies and inform the Superintendent of shortages., • Mechanical systems: Inspect and maintain boilers, pumps & other mechanical systems. Qualifications and Skills: • Appearance: Neat, clean well-groomed appearance, • Education: High School Graduate or G.E.D. Read, write, & speak English, • Proficient knowledge: Knowledge of carpentry and building maintenance, safe operation of basic hand and power tools, oil burner systems, heating and ventilation systems, electrical systems, appliance maintenance and maintenance, workplace safety and safe lifting and handling procedures, as well as the knowledge of when to contact qualified service personnel., • Skills: An employee in this position must be knowledgeable and skilled in a variety of trades (see above), • Abilities: Applicant must have the physical strength to lift cleaning materials and heavy equipment, physical stamina for being on their feet all day, • Other characteristics such as personal characteristics: Interpersonal skills are necessary for interacting with building occupants and other staff members., • Professional Certification: FDNY certificates of fitness for operating a low-pressure boiler, residential sprinkler systems helpful., • Experience: 3 years’ experience in general building maintenance., • Excellent problem solving and conflict resolution skills., • Experience working with people of different income levels and ethnic backgrounds., • Excellent communication and interpersonal skills Physical Requirements: The building maintenance worker has a physically strenuous and demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The building maintenance worker will have to work in all weather conditions and must be prepared for both extreme heat and cold. • Have constant need (66% to 100% of the time) to perform the following physical activities:, • Bend/Stoop/Squat/Kneel: Perform routine maintenance/repairs, pick up tools and needed equipment., • Climb Stairs: Service requests, make-ready needs for 2nd and 3rd floor apartments., • Push or Pull: Move equipment, appliances, open and close doors, etc., • Reach Above Shoulder: Perform routine maintenance/repairs, stock and remove equipment, parts, etc., • Climb Ladders: Perform routine maintenance/repairs., • Grasp/Grip/Turning: Handle tools and equipment, perform routine maintenance/repairs., • Finger Dexterity: Handle tools and equipment, perform routine, • Lifting/carrying (supplies, replacement parts, ladders, etc.):, • Over 150 lbs.: Rare need (less than 1% of the time), • 75 – 150 lbs.: Occasional need (1% to 33% of the time), • 25 – 75 lbs.: Frequent need (33% to 66% of the time), • 1 – 25 lbs.: Constant need (66% to 100% of the time) This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. E/O/E

Job Description Stone Mountain Management is a privately owned, multi-family property management firm. We own and operate a portfolio of properties throughout the New Jersey and Texas markets. We are seeking an experienced Apartment Maintenance Technician to join our team of property management professionals in the New Jersey communities of Short Hills and South Orange. The Maintenance Technician's role is to assist the Maintenance Supervisor in maintaining the physical integrity of our apartment communities. Duties and Responsibilities • Completion of work orders for apartment unit repairs., • Perform routine preventative maintenance., • diagnose and repair appliances, • A/C and Heating systems, • Plumbing, insulating, roofing, pool maintenance, flooring, • Basic carpentry, painting, and drywall repair, • changing locks, rekey, • boiler, gas, and electric water heater systems, • electrical repairs Requirements for the Position: • Requires legal authorization to work in the United States, • Ability to communicate effectively, both written and verbal., • On-call coverage for emergencies after hours, on weekends, and on holidays., • Ability to respond and remedy maintenance issues promptly., • Physical strength necessary to lift and/or move up to 50lbs, • Sufficient dexterity to operate commonly used tools Education and Experience: • High School Diploma and certification from an accredited trade school are preferred., • EPA Type I, Type II, or Universal certification preferred., • Must have a valid driver’s license and dependable transportation., • 3 to 5 years of prior related experience in a facilities maintenance field. Compensation and Benefits: • We offer competitive pay commensurate with experience and skills., • Medical insurance, • Dental and Vision insurance, • 401k planning and pre-tax contributions, including matching component., • Life and Disability insurance, • Employee Assistance Programs (EAP), • Vacation, Sick leave, and paid holidays, • flexible spending accounts. Equal Opportunity Employer Job Type: Full-time Salary: $28.00 - $35.00 per hour depending on experience Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 8-hour shift with 1-hour Lunch, • Day shift, • Holidays, • Monday to Friday, • On call, • Overtime, • Weekend availability Ability to commute/relocate: • Short Hills, NJ 07078: Reliably commute or planning to relocate before starting work (Required) Experience: • Maintenance: 3 years (Required) License/Certification: • Driver's License (Required), • EPA Certification (Required), • Low Pressure Black Seal License (Strongly Preferred), • HVAC Certification (Preferred), • Journeyman Electrician (Preferred), • Journeyman Plumber (Preferred)

Whether you're creative, strategic, persuasive, or mechanically inclined, there's a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we'll be proud to have you on the journey. Pace Packaging is seeking a skilled Electrician to join its Production team in building and supporting advanced packaging automation systems. This role involves reading electrical schematics, building and wiring control panels, installing field wiring, and troubleshooting equipment to ensure optimal performance. The Electrician will collaborate with engineering teams to debug systems, update electrical drawings, and support both electrical and mechanical installation and maintenance, contributing to high-quality, efficient operations. Responsibilities: • Build Electrical Control Panels, • Install Machine Wiring, • Install Field Wiring, • Troubleshoot Systems, • Redline Electrical Prints, • Assist in mechanical assembly and installation, • Assist with facilities and equipment related maintenance and installation Qualifications: • Previous work experience in dealing with AC motors, motor starters, disconnects, and PLC I/O wiring required, • Experience in industrial electrical panel and machine wiring, • Ability to read Electrical Drawings, • Ability to read and understand Electrical Engineering drawing sets, • Ability to read blueprints and electrical schematics created on AutoCAD, • Strong understanding of safe electrical practices, • Deep understanding of wire sizes for industrial machine wiring, • Hands-on experience reading/interpreting bill of materials (BOMs), • Advanced Microsoft Office skills, • Excellent communication skills, both written and verbal, • Demonstrated ability to multitask, prioritize, and meet timelines on deliverables, • Excellent attention to detail, • Ability to define problems, collect data, and draw valid conclusions, • Must know how to use basic hand tools cordless drill; pneumatic tools, socket set, wrenches, open end and box end, screwdrivers regular and Phillips and pliers regular and channel lock What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits you are eligible on your first day of employment! Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Base hourly rate: $22-$32/hr

Maintenance Senior Industrial Electrician Richards Manufacturing Company is a producer of electrical and gas distribution equipment for utility and commercial/industrial markets. For over 70 years Richards has served the industry with quality, dependability, and outstanding customer service. With humble beginnings as a family owned and operated businessoriginally entering the market as a producer of a single style of underground connectorRichards has evolved to offer a wide selection of products across several product lines. Our offices and manufacturing facilities are located in Irvington, NJapproximately 14 miles west of New York City. We are seeking a skilled Senior Industrial Electrician with a New Jersey Class A Journeyman Electrician license to oversee and guide other electricians and ensure the optimal functioning of all equipment and machines at our facility. The Industrial Electricians install, maintain, and repair industrial equipment and parts. Be able to understand and make decisions based on technical documents, such as blueprints, schematics, or instructions. This position requires extensive knowledge of electrical components as well as electrical safety codes and regulations. They must be professional, technical, and mechanically proficient, also be able to operate tools near electrical components. We operate a safe, clean facility and consider security and safety our top priorities, so we are looking for a professional whose values reflect our own. Reports to: Maintenance Manager Location: Onsite, Richards Manufacturing Facility (Irvington, NJ) Hours: Full Time, including Saturdays Key Responsibilities: • Oversee and guide other electricians in the department, to ensure compliance with safety code and regulations., • Installing, repairing, and maintaining electrical industrial and facilities equipment., • Interact with work instructions and maintain parts inventory from a computer., • Performing scheduled inspections, servicing, and testing of equipment, PM., • Maintains a safe and clean working environment by complying with procedures, rules and regulations., • Read and understand electrical schematics and blueprints., • Troubleshooting malfunctions., • Contributes to team effort by accomplishing related results as needed., • Work overtime as needed., • Perform and approve LOTO permits., • Perform and approve shock & arc flash risk assessments., • Assist and / or facilitate the completion by 3rd party supplier a electrical power systems study to include device coordination, short circuit analysis, & incident energy analysis., • Strong knowledge of NEC, NFPA 70E, NFP79, and OSHA safety practices., • Experience in A/C 120/208/480 Volts 3 phase systems D/C 12/24 Volts., • Proficiency installing and bending EMT. Required: High school diploma or General Education Degree (GED) • Required: Class A Journeyman Electrician License, NJ, • Required: Electrical Safety & Arc Flash Training, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications demonstrating ability to perform Hand-On maintenance Company's Quality Management System • ISO 9001:2015 awareness, • Electrical Safety & Arc Flash Experience PLC Program and Troubleshooting (Allen-Bradley, Mitsubishi, Siemens). • An ability to work well under pressure., • Teamwork and problem-solving skills., • Efficiency and organization., • Knowledge of electrical systems, hand tools, and industrial equipment., • Knowledge of hydraulics is a plus., • Ability to read schematics, blueprints, and other technical documents., • Willing to perform physically demanding tasks, such as lifting heavy objects, climbing ladders, crawling, etc. per OSHA guidelines., • Both English and Spanish speaking applicants will be a plus., • Good communication and time management skills.

Preferred Skills & Experience -Associate's degree in Electrical Technology, Industrial Maintenance, Mechatronics, or a related technical field. Disclaimer: By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Synerfac Technical Staffing and our cont

LICENSED ELECTRICIAN - GENERAL MAINTENANCE. Electrician's license preferred.

Manufacturing ElectricianPosition Overview: gpac is partnering with a highly established manufacturing leader with over 60 years of industry success to confidentially hire an experienced Manufacturing Electrician to join its collaborative maintenance team. Qualifications3+ years of experience as an

Junior Industrial Electrician - 1st Shift - $28-$30/hr. This is an excellent opportunity for someone with basic electrical experience who wants to develop their skills in industrial maintenance while working alongside experienced electricians and maintenance professionals. Work alongside senior elec

Job Title: Union Electrician – Maintenance. The Electrician 1/C – Maintenance is responsible for performing skilled electrical work in the installation, maintenance, troubleshooting, and repair of facility and production electrical systems.

Job Description We are seeking an experienced A Level Generator Field Service Technician in Northern Jersey areas for our Power Generation Client!! Pay is $42 - $50/hr depending on experience, plus steady overtime (techs average about 55 hours a week, paid after 40), full benefits, and sign-on bonuses at many of our employers. Day shift, Monday to Friday, plus an on-call rotation for emergency service. Are you the person for the job? If you can troubleshoot megawatt class gen sets, transfer switches, and generator controls, you are in demand right now, and the pay reflects it. What you will do: • Diagnose, repair, and commission diesel and gas generator sets from small standby units through 2MW and larger, • Troubleshoot automatic transfer switches, generator controls, and switchgear, • Run startups, load bank testing, and site acceptance on new installations, • Keep accurate service records and get critical sites back online fast What we are looking for: • 7+ years on industrial generators, or heavy-duty diesel with strong electrical controls depth, • Comfortable inside switchgear and control panels, reading prints and schematics, • Factory training on Kohler, Cummins, Cat, MTU, or Generac, EGSA certification a plus, • Your own hand tools, valid driver license, willing to carry an on-call rotation Why apply through LaTrae: • We place generator and critical power techs all day, so we know these employers and these roles, • A direct line to hiring managers, faster than applying cold, • Always free to you, the employer pays our fee, • Confidential, your current employer never knows you are looking Generator Technician, Generator Field Service Technician, Generator Service Technician, Power Generation Technician, Standby Power, Emergency Power, Critical Power, Backup Power, Diesel Generator, Natural Gas Generator, Genset, Gen Set, Switchgear, Paralleling Switchgear, Automatic Transfer Switch, ATS, Load Bank, Load Bank Testing, Commissioning, Startup Technician, EGSA, EGSA Certified, Kohler, Cummins, Onan, PowerCommand, Caterpillar, Cat, MTU, Detroit Diesel, Generac, Woodward, Deep Sea Electronics, DSE, ComAp, Basler, UPS Technician, Critical Facilities, Critical Environment Technician, Data Center Technician, Prime Power, 12P, 91D, Marine Generator, Diesel Mechanic, Diesel Technician, Diesel Tech, Industrial Maintenance, Maintenance Electrician, Electrician, Apprentice, Universal Technical Institute, UTI, Lincoln Tech, WyoTech, Military Technician, Veteran Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • 401(k) Schedule: • 8 hour shift, • 10 hour shift, • Day shift, • Monday to Friday, • On call, • Overtime, • Weekends as needed

Job Description We are seeking experienced B Level Generator Field Service Technicians in the Northern Jersey areas for our Power Generation Client!! Pay is $37 - $44/hr depending on experience, plus overtime, full benefits, and sign-on bonuses at many of our employers. Day shift, Monday to Friday, plus an on-call rotation for emergency service. Are you the person for the job? If you can run your own service calls on commercial and industrial generators, you are in demand right now, and the pay reflects it. What you will do: • Service, troubleshoot, and repair commercial and industrial generator sets through roughly 1MW, • Perform startups, commissioning, and scheduled maintenance across a route of accounts, • Work through generator controls, transfer switches, and starting and charging faults, • Keep accurate service records What we are looking for: • 3+ years on generators, or heavy-duty diesel with real electrical aptitude, • Able to read a wiring diagram and follow a circuit without hand holding, • Experience on any major generator brand, Kohler, Cummins, Cat, MTU, or Generac, • Your own hand tools, valid driver license, willing to carry an on-call rotation Why apply through LaTrae: • We place generator and critical power techs all day, so we know these employers and these roles, • A direct line to hiring managers, faster than applying cold, • Always free to you, the employer pays our fee, • Confidential, your current employer never knows you are looking Generator Technician, Generator Field Service Technician, Generator Service Technician, Power Generation Technician, Standby Power, Emergency Power, Critical Power, Backup Power, Diesel Generator, Natural Gas Generator, Genset, Gen Set, Switchgear, Paralleling Switchgear, Automatic Transfer Switch, ATS, Load Bank, Load Bank Testing, Commissioning, Startup Technician, EGSA, EGSA Certified, Kohler, Cummins, Onan, PowerCommand, Caterpillar, Cat, MTU, Detroit Diesel, Generac, Woodward, Deep Sea Electronics, DSE, ComAp, Basler, UPS Technician, Critical Facilities, Critical Environment Technician, Data Center Technician, Prime Power, 12P, 91D, Marine Generator, Diesel Mechanic, Diesel Technician, Diesel Tech, Industrial Maintenance, Maintenance Electrician, Electrician, Apprentice, Universal Technical Institute, UTI, Lincoln Tech, WyoTech, Military Technician, Veteran Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • 401(k) Schedule: • 8 hour shift, • 10 hour shift, • Day shift, • Monday to Friday, • On call, • Overtime, • Weekends as needed

Maintenance Electrician | 2nd shift (1:30pm. Complete scheduled and emergency maintenance through the CMMS system. Perform preventive, predictive, and corrective maintenance.

Maintenance Electrician | 2nd shift (1:30pm - 10pm) | PLCs | 480V | Food Manufacturing This Jobot Job is hosted by: Amanda Ahmad Are you a fit? Easy Apply now by clicking the "Quick Apply" button and sending us your resume. Complete scheduled and emergency maintenance through the CMMS system. Perfor

This position will share the responsibility for upkeep and maintenance on the fleet of over 800 trucks, tractors, trailers and dollies.

Residential Project Manager - Additions & Renovations.Saddle Brook, NJ (HQ) projects throughout Northern New Jersey.On the Spot Home Improvements is a home remodeling firm that transforms homes with craftsmanship, transparency, and white glove service.We believe great projects start with great peopl

In the role of Project Manager, you will be responsible for managing the construction lifecycle of various projects, ranging in value from $1 million - $30 million.The Project Manager will play a pivotal role in coordinating and collaborating with various stakeholders, including clients, subcontract

You will work closely with the Maintenance Supervisor to troubleshoot issues, perform preventive maintenance, and support continuous improvement of the production process. We are seeking a skilled Lead Maintenance Technician (2nd or 3rd shift) to join our Engineering team and support our fast-paced

Remember to check your CV before applying Also, ensure you read through all the requirements related to this role.Develop and execute timelines to support the customer’s new product launches by planning with appropriate TCI Sales and sales support team members.Work with designated sales support te

A client of Insight Global is seeking an experienced Senior Electrical Project Manager to lead large-scale data center and healthcare facility projects from design through commissioning.This role requires strong technical expertise, client management skills, and experience overseeing complex electri

MONTH CONTRACT with potential to extend*.ONSITE 3 days/week in MORRIS COUNTY NJ.Must have pharmaceutical, healthcare, market access, life sciences, or biotech training background*.Training Consultant (6-Month Contract) | Morris County NJ.Robert Half's pharmaceutical client is seeking an experien

Newark, NJ (Hybrid – 3 days per week on-site).In this critical role, you will bridge the gap between financial business strategy and technical execution, taking ownership of the project lifecycle from business case through to final implementation.The ideal candidate will combine hands-on SAP Finan

We are working with a commercial real estate group that owns & operates shopping centers across the Northeast.They're well-established with 70+ properties.Project Manager (Construction) will mostly be handling tenant buildouts across the portfolio.

Project Manager Opportunity | Hudson County, NJ 🚨.We are partnering with a well-established Tri-State General Contractor with a family-led, developer-builder approach and a strong track record delivering ground-up high-rise residential developments throughout the region.With a growing pipeline of

Heavy Highway and Infrastructure.This is an incredible opportunity to join one of the.Lead full lifecycle project management for large-scale projects, from preconstruction through closeout.Serve as primary point of contact for owners, agency representatives, engineers, and subcontractors.Oversee pro

Ensure all maintenance activities are completed in compliance with company safety standards, policies, and regulatory requirements. We are seeking a skilled and detail-oriented Maintenance Technician / Controls Specialist to support the ongoing reliability, performance, and efficiency of our manufac

Supply Chain and New Product Introduction.World-Renowned Global Consumer Products, Personal Care, Cosmetics corporation.Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today.Lead projects transitioning into a new Supply Chain and New Prod

Assistant Estimator Project Manager.CMA is seeking Assistant Estimator Project Manager for various construction projects from conception through completion in New York City and the surrounding boroughs.Compensation will be commensurable with the applicant’s experience.Perform take offs, create and

Supply Chain and New Product Introduction.World-Renowned Global Consumer Products, Personal Care, Cosmetics corporation.Skills, Experience, Qualifications, If you have the right match for this opportunity, then make sure to apply today.Lead projects transitioning into a new Supply Chain and New Prod

Construction Project Manager – Architectural Millwork.Our client seeks an experienced, detail-oriented.This leadership-level opportunity is for a professional who thrives in a fast-paced manufacturing and construction environment and can seamlessly bring complex architectural visions to life.Manag

Works with Planner Scheduler to optimize preventative maintenance procedures. Utilizes predictive maintenance technologies to collect equipment performance data. Experience in predictive technologies, precision alignments, and general maintenance of applicable process equipment.

We're Hiring: Technical Project Manager – Data Warehouse.Mandatory: Onsite final interview required.Technical Project Manager with experience in Data Warehouse or Data Engineering projects.Manage project plans, timelines, milestones, dependencies, and deliverables.Track project risks, resolve bloc

An experienced ERP Project Manager to oversee implementation, manage the outside vendor, resolve issues, and train employees to use the new system.We are seeking an experienced ERP Project Manager to help lead an ongoing ERP upgrade for an established distribution and manufacturing company.Working d

Mold Maintenance and Preventive Maintenance. PTI Tech is looking for a dependable, detail-oriented Mold Maintenance Technician who wants to develop their skills and grow into a Mold Maker. Completing scheduled mold maintenance on time and following established procedures.