Trabajos manual en Clifton, New JerseyCrear alertas

Job Title: Respiratory Therapist Reg Location: Cooperman Barnabas Medical Ctr Department Name: Respiratory Therapy Req #: 0000208663 Status: Hourly Shift: Evening Pay Range: $40.74 - $50.88 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs basic/advances therapeutic procedures as outlined under the scope of respiratory patient care service within the section of the policy procedure manual. Transcribes and implements physician orders. Uses basic oxygen advanced assessment skills and patient information to maintain awareness of patient care needs. Qualifications: Required: • Graduate of an NBRC school for respiratory care, • Successful completion of all Orientation Programs. Preferred: • Experience preferred Certifications and Licenses Required: • Registered Respiratory Therapist by NBRC, • Licensed by New Jersey State Board of Respiratory Care, • BLS Certification Required. (American Heart Association) Scheduling Requirements: • FT, • Evenings

Job Title: Resp Therapist Certified Location: Cooperman Barnabas Medical Ctr Department Name: Respiratory Care Req #: 0000236963 Status: Hourly Shift: Day Pay Range: $43.61 - $53.49 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs basic/advances therapeutic procedures as outlined under the scope of respiratory patient care service within the section of the policy procedure manual. Transcribes and implements Physician orders. Uses basic oxygen advanced assessment skills and patient information to maintain awareness of patient care needs. Qualifications: Required: • Graduate of a National Board for Respiratory Care (NBRC) School for Respiratory care Certifications and Licenses Required: • Certfied Respiratory Therapist, • BLS certification required (American Heart Association)., • Licensed by New Jersey State Board of Respiratory Care., • Successful completion of all orientation programs Scheduling Requirements: • Days, • FT

_ Become A US FOODS® CDL A Delivery Driver Advance your career in the foodservice industry with US Foods! Enjoy a comprehensive benefits package along with a strong safety culture that supports your success. This position requires a Class A license. $12,000 retention bonus for eligible new hires. $20,000 retention bonus for eligible new hires with 2+ years of commercial food delivery experience! Our delivery drivers make a daily minimum of $320. Earn $115k in your first year! Schedule & Location • 5-6 day schedule INCLUDES WEEKENDS (home daily), • Dispatch - until complete (12-14 hour shifts), 10-15 stops per day, • Routes located in Metro NY- Manhattan, Queens, and Brooklyn US Foods is one of the largest food distributors with a culture and history of promoting from within, excellent training programs and a continuous improvement focus. Main Ingredients of the Job • Safely drive trucks to customers and meet scheduled customer delivery, • times, • Carefully unload products from the trailer with a two-wheeler, pallet jack,, • or by hand and place in designated customer storage areas, • Verify accuracy of delivery with customers and obtain proper signatures, • Handle collections and payments from customers when applicable, • Professionally perform customer service responsibilities to enhance our, • client experience, • Perform all pre-trip and post-trip equipment inspection Physical Requirements • Ability to lift/carry/push/pull 20 to 80+ lbs. of product repetitively during, • each shift required, • Comfortable driving and working in inclement weather conditions with frequent stops (10+ per shift) required What You Bring to the Table • Register to the FMCSA Clearinghouse*, • Must be at least 21 years of age, • Must have valid CDL Class A issued by the state of legal residence with, • necessary endorsements and DOT qualifications, • Minimum of six months commercial driving experience (any industry) OR, • three months commercial driving experience in the food and/or beverage, • delivery industry required, • Ability to operate manual transmission preferred; may be required in, • specific locations, • Must be able to read and communicate in the English language - able to, • hold a conversation, to understand highway traffic signs and signals, to, • respond to official inquiries, and to enter information on reports and, • records. Why US Foods At US Foods, we’re committed to our mission of GREAT FOOD. MADE EASY™ -- providing food products that keep operators ahead of customer demand and services that help them run their operations. Great drivers are crucial to the US Foods® team and one of the important faces of our organization. On and off the road, our drivers strive for integrity and reliability, while building trusting relationships with customers. At the foundation of those efforts are our cultural beliefs, the pillars that define our work ethic, collaborative spirit and service. Together we help our customers make it, but we also believe in helping our drivers make it! *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Drivers are required to the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver’s license (CDL) and commercial learner’s permit (CLP) holders’ drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit _ and click GO to login. If you are able to log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $34 and $39.35 an hour This role may also receive overtime compensation and shift differential where applicable. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. *EOE – Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status*

Job DescriptionC.R. England is Now Urgently Hiring Experienced Regional CDL-A Drivers! Pay Increase: Drivers Average $78,000 - $97,000 Annually* No-Touch Freight - Safe & On-Time Bonus • Valid CDL-A and 3+ months of current experience required, • This lane is not suitable for students, recent grads, or trainees This Dedicated Fleet Offers: • NEW pay increase: drivers average $78,000 annually - top 10% earn up to $97,000 per year, • Home time: 2-3 weeks out with 2-3 days off, • No-touch freight with some drop-and-hook + some live unloading & possible live reloading, • Mileage pay, • Dry-van trailers & condo trucks, • Safe & on-time bonus, • Top-of-the-line automatic transmission trucks Benefits Include*: • Full benefits package for you and your family, • 401(k) participation, • Paid time off & bonus incentives, • Unlimited cash referral program Earn Big at C.R. England with New & Improved Pay - Apply Now! Route Details: Our Dedicated Fleet is actively seeking experienced CDL-A regional drivers for a dry van operation hauling Anheuser-Busch products across the 48 lower states. This is an account with current operations within all regions of the United States. Job responsibilities on this account include ensuring the safe and timely transportation of all loads and remaining compliant with all safety regulations and company policies. Drivers on this fleet will operate condo trucks and dry van trailers delivering no-touch freight. Loads at some locations will be drop-and-hook, while others will involve live unloading or possibly live reloading. Home time for this fleet is 2-3 days every 2-3 weeks, to help maximize driver miles and earning potential. If you're an experienced CDL-A driver seeking a reliable and rewarding opportunity, we encourage you to apply and join our dedicated team! Requirements: • Valid CDL-A and 3+ months of current experience required., • This lane is not suitable for students, recent grads, or trainees., • Must be 21 years or older, • Must be able to pass a DOT drug screen Better Pay, Home Time, and Miles. C.R. England is Urgently Hiring - Apply Now! Pay Disclaimer:* The job information and data provided here are for informational purposes only, are based in whole or in part on estimates, and do not represent any type of promise or prediction of future performance or employment. PAST PERFORMANCE AND THE INFORMATION CONTAINED HERE ARE NO GUARANTEE OF FUTURE PAY RESULTS, REVENUE, MILES, OR HOME TIME. NO RIGHT TO EMPLOYMENT, CONTINUED EMPLOYMENT, SPECIFIC EMPLOYMENT, OR A MINIMUM AMOUNT OF MILES OR HOME TIME, OR SPECIFIC PAY AMOUNT IS GUARANTEED OR CREATED BY THIS DATA OR THE USE OF THIS SITE. ANY AMOUNTS IN ANY CATEGORIES ON THIS SITE WILL NOT REFLECT ACTUAL FUTURE RESULTS. Your actual pay, mileage, and home time will vary from these numbers depending on many factors, which may include tenure-based pay rates, your fleet, how hard you work, company performance, and how much you drive, among other factors. Because precise rate of pay can be difficult to guarantee in various pay structures common in the transportation industry, you are only guaranteed applicable minimum wage for hours worked in a given pay period. Click here for additional disclaimer information and additional detail about how this data is generated. Benefits:* Medical, Dental, Vision, HSA, FSA, Life and AD&D Insurance, PTO, 401(k), and additional voluntary benefits. For additional details, including eligibility, please see the Company’s Benefit Summary and Driver Employee Policy Manual.

Job Description Position: CDL Class A Tanker Driver – Food-Grade Liquids Location: Newark, NJ Pay: • $38/hr to start, • $500 bonus, • OT after 40 hours Schedule: Monday–Friday, typically starting between 4:00–5:00 AM Approximately 50 hours per week Rare Saturdays Position Overview: Seeking experienced CDL Class A drivers to transport food-grade bulk liquids, including vegetable oil, milk, orange juice, and alcohol. Drivers will make approximately 3–4 deliveries per day, primarily along consistent routes with repeat customers. Customers handle unloading, and drivers are responsible for securing and sealing the tanker. Requirements: Valid CDL Class A license Minimum 5 years of CDL A driving experience Minimum 2 years of tanker experience Tanker, Hazmat and TWIC endorsements required Manual transmission experience required No felonies within the past 10 years No more than one moving violation or one at-fault accident Equipment & Additional Details: Primarily 2018 or newer day-cab trucks No slip seating Trucks are picked up and parked at a designated tank wash station Electronic logging app required Benefits: • Health, • Dental, • Vision Requirements: • Valid Class A Driver's License W/ 5 years experience, • 2 years of tanker driver, • Ability to operate a 10 speed manual (preferred), • Must have Tanker, Hazmat and TWIC Job 14094 PandoLogic. Keywords: Truck Driver, Location: Newark, NJ - 07102 , PL: 604765731

Job Description Company Overview: NRS is a leading provider of transportation & supply chain management services, and a family-owned and operated company that has been providing smart logistics solutions for the world's leading retailers and manufacturers for 70+ years. Whether it’s NRT, Keystone, Keystone Fresh, or Keystone Capacity, our innovative energy drives us towards new and valuable solutions for our clients, even as we continuously grow and strengthen our network. We are dedicated to creating a culture that empowers the individual and offers our associates the opportunity to apply their unique skill to the challenges facing our clients. In the office, the warehouse, or on the road, it is this commitment to our innovative spirit that unites us in common mission to push boundaries in the logistics industry. Job Overview: The Turret Operator plays a critical role in warehouse operations by safely operating turret trucks and other powered industrial trucks (PIT) to move, stack, and retrieve merchandise. The operator ensures operational efficiency, safety compliance, and quality standards in the use of turret trucks and other PIT operations, while upholding safety standards and actively participating in improving workplace practices and procedures. Duties and responsibilities: • Operate turret trucks to safely stack, move, locate, relocate, and count merchandise, adhering to all safety protocols., • Transport products to and from designated warehouse locations, including placement at various heights within the racking system., • Verify the accuracy of order quantities against work orders, and accurately pick and store products per the inventory management system., • Ensure shipment documentation complies with Standard Operating Procedures (SOP)., • Conduct pre-operation checks on PITs, troubleshoot minor issues, and manage equipment maintenance., • Conduct cycle counts and physical inventories as required, ensuring products are properly labeled and stored in the correct locations., • Follow all safety practices and immediately report hazardous situations to management., • Communicate effectively with supervisors and team members regarding inventory levels, product issues, and operational needs., • Maintain a safety-first approach, including proper PPE compliance and maintaining a hazard-free work environment., • Perform other duties as assigned. Qualifications: • High school diploma required., • Valid Turret truck certification with recertification required every three years., • Proven experience operating a turret truck or similar equipment in a warehouse environment., • Physical agility and the ability to work extended hours, including evenings, weekends, and holidays as needed., • Keen attention to detail with a solid background in warehouse operations., • Proficient knowledge of safety practices, rules, and company requirements., • Effective verbal and written communication skills in both English and Spanish., • Familiarity with order receipts, warehouse management software (WMS), RF scanning devices, and distribution center locations., • Strong attention to detail and organizational skills, with the ability to work as part of a team., • Understanding of company policies and procedures., • Capability to lift up to 49 pounds independently and handle products heavier than 50 pounds using safe team-lift methods., • Physical ability to push, pull, squat, bend, and reach throughout a regular shift. Physical Demands: • Operating Machinery: Regular operation of forklifts and other material handling equipment., • Sitting and Maneuvering: Extended periods of sitting while navigating and operating the forklift within tight spaces., • Attention to Safety: Constant vigilance and adherence to safety protocols to prevent accidents and ensure safe operation., • Lifting and Stacking: Manual lifting and stacking of materials when necessary, occasionally handling loads of up to 50 pounds., • Visual and Auditory Awareness: High level of situational awareness required, with the need to quickly identify hazards and signals., • Flexibility and Coordination: Bending, reaching, and coordinating movements for loading and unloading materials., • Working Conditions: Work in warehouses, distribution centers, or outdoor areas, potentially in varying weather conditions, including cold storage environments. EEO Statement: NRS is an equal opportunity employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or any other legally protected characteristic.

Job Description Job Summary We are looking for a skilled Auto Mechanic to maintain and repair vehicles. You will be responsible for troubleshooting issues and fixing them aiming to maximum reliability and functionality. An excellent auto mechanic has good eye-hand coordination and manual dexterity. They are well-versed in complex mechanical or electronical systems of vehicles and have excellent problem-solving abilities. They must also be good communicators. Responsibilities • Inspect vehicle engine and mechanical/electrical components to diagnose issues accurately, • Inspect vehicle computer and electronic systems to repair, maintain and upgrade, • Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to vehicle functionality and longevity, • Schedule future maintenance sessions and advise motorists on good vehicle use, • Repair or replace broken or dysfunctional parts and fix issues (e.g. leaks), • Provide accurate estimates (cost, time, effort) for a repair or maintenance job, • Keep logs on work and issues, • Maintain equipment and tools in good condition Requirements • Proven experience as auto mechanic, • Excellent knowledge of mechanical, electrical and electronic components of vehicles, • Working knowledge of vehicle diagnostic systems and methods, • Ability to handle various tools (e.g. pliers) and heavy equipment (e.g. lift), • Willingness to observe all safety precautions for protections against accidents, dangerous fluids, chemicals etc., • Excellent physical condition, • High school diploma is preferred; Certification from a vocational school or completion of apprenticeship is preferred, • Valid certification (e.g ASE) is a definite plus

Job Description Six states plus the DC area make up the delivery map on this Target condo fleet, with every week anchored to the Target Regional Distribution Center in Stuarts Draft, VA. You haul dry freight to Target stores on set lanes, and you head home weekly for a 34-hour reset. Drivers average 1,900 miles a week. Most loads are drop and hook, and the trucks are all automatic transmissions. Lane Details: • Dry freight delivered to Target stores, • Deliveries throughout MD, NJ, PA, VA, WV and the DC area, • Distribution center at 345 Mount Vernon Rd., Stuarts Draft, VA 24477, • Set lanes averaging 1,900 miles a week, • Most loads are drop and hook, • A few small format stores require a driver unload assist Truck Driver Schedule: • Home weekly for a 34-hour reset, • The account runs 24/7, including holidays, • You need to be able to work both day and night shifts CDL-A Truck Driver Equipment: • All trucks have automatic transmissions, • Top of the line equipment from one of the newest fleets in the country A Steady Account: • Many of our Dedicated fleet customers have been with us for over 20 years, and demand remains high Pay Details: • Pay per mile (CPM), • Safety Bonus Incentives, • Holiday Sign-On Bonus - $1,000 Requirements: • Valid Class A CDL, • 21 years of age or older, • 3+ months of recent Class A CDL experience, • If trucks need to be taken home along the route it is allowed within 35 miles of last delivery - but must be safe and secure place to park Benefits: • Medical, Dental, Vision, HSA, FSA, Life and AD+D Insurance, • PTO, • 401(k), • Additional voluntary benefits Jobs for Experienced Truck Drivers at C.R. England Consistency, reliability, and support are the reasons experienced professional drivers come to C.R. England and stay with us for the long haul. We’re a trucking company run by truckers, which means we understand what professional drivers need to feel at home. We’re always looking for experienced professionals who share our commitment to safety and excellence to join our stellar team of stand-out drivers. For additional details, including eligibility, please see the Company's Benefit Summary and Driver Employee Policy Manual. Weekly and yearly pay estimates are based on 1+ years of experience. For Pay Disclaimer visit: https://www.crengland.com/pay-disclaimer/. For Privacy Policy visit: https://www.crengland.com/privacy-policy/ \nCompany Description Whether you need a CDL, a truck driver job, or both; we have you covered with best-in-class training and great pay is just the start to take your career to the next level. We have open lanes in our Dedicated, Regional, National, and Intermodal divisions allowing you to choose your lane. All of our jobs include highly competitive pay, health and retirement benefits, and the industry’s best equipment. We are seeking truck drivers that have a safe and clean record and can handle 12 Gears, 18 Wheels, 40 Tons, 80 Feet, and 400 Horsepower! Whether you need a CDL, a truck driver job, or both; we have you covered with best-in-class training and great pay is just the start to take your career to the next level. We have open lanes in our Dedicated, Regional, National, and Intermodal divisions allowing you to choose your lane. All of our jobs include highly competitive pay, health and retirement benefits, and the industry’s best equipment. We are seeking truck drivers that have a safe and clean record and can handle 12 Gears, 18 Wheels, 40 Tons, 80 Feet, and 400 Horsepower!

Job DescriptionAbout the Role:Join our dynamic team as an Industrial Delivery Driver and become the vital link between our warehouse operations and our valued customers. In this energetic role, you will be responsible for safely transporting industrial materials, equipment, and supplies using company van or rack truck, ensuring timely deliveries while maintaining exceptional customer service. Your expertise in driving, manual handling, and warehouse logistics will drive efficiency and satisfaction on every route. If you thrive in a fast-paced environment and are committed to safe driving practices, this position offers an exciting opportunity to grow your career in delivery and logistics. Responsibilities: • Safely operate van or rack truck to deliver industrial goods across designated routes, adhering strictly to traffic regulations and DOT (Department of Transportation) standards, • Load and unload materials using manual handling techniques, pallet jacks, or material handling equipment while following safe lifting practices, • Conduct pre-trip inspections of vehicles to ensure safety and compliance with all regulations before each shift, • Communicate effectively with dispatch and customers to confirm delivery times, resolve issues, and provide excellent customer service, • Assist with warehouse operations when needed, including inventory management, moving stock within the facility, and supporting warehouse team members, • Maintain a clean and organized vehicle interior and exterior to promote safety and professionalism during deliveriesRequirements:, • Proven experience as a delivery driver, courier, or in a similar role involving commercial driving and route management, • Valid driver’s license with a clean driving record, • Experience operating commercial vans and rack truck, • Strong knowledge of traffic laws, DOT regulations, and weight handling in the workplace to ensure safety at all times, • Ability to perform heavy lifting and manual handling tasks safely; familiarity with load & unload procedures using pallet jacks or material handling equipment, • Warehouse experience including warehouse operations, moving stock, and manual handling skills is a plus, • Excellent customer service skills with a professional attitude during interactions with clients, • Ability to adhere strictly to safety protocols related to heavy lifting, moving materials, and operating heavy machinery when applicableAbout Us:J H Fischer & Son Inc is a trusted, family-rooted company based in Newark, NJ with a long-standing reputation for quality and dependability. Our customers rely on us because we consistently deliver with professionalism and care. We value our team members and foster a supportive work environment where hard work is recognized and rewarded. If you’re ready to bring energy to your career while ensuring safe deliveries that keep our operations running smoothly, we want you on our team!

Job Description We are looking for a CDL Delivery Driver (A or B) for an immediate hire opportunity in Williamstown, NJ! A well established landscaping supply company is seeking an experienced CDL Driver. If you are looking to continue your career, while earning a great paycheck, this role is for you! Schedule: • 7:00am - 5:00pm (hours may vary depending on workload), • Monday – Friday, • 7:00am – 12:00pm Saturday (alternating) Competitive Compensation Offered! • $25/hr Responsibilities: • Operate a delivery truck, • Transport goods safely and efficiently, ensuring timely deliveries, • Perform pre-trip inspections, • Adhere to DOT regulations, and communicate with dispatchers, • Assist with loading and unloading process at designated locations, • Verify load accuracy against manifests and ensuring proper rigging securing, • Maintain proper vehicle maintenance, including tire pressure, fluid levels, and reporting repairs, • General warehouse work when not on delivery Qualifications: • MUST have a valid CDL Class A or B, • MUST be able to operate 10 speed manual, • Ability to prioritize and multitask, • Excellent written and verbal communication skills, • Strong attention to detail, • Strong organizational skills Immediate Benefits Upon Hire • Medical Plan, • Direct Deposit, • Dental Plan, • Vision/Eyewear Plan, • Life Insurance, • Referral Bonus \nCompany Description Express Employment Professionals of Somerset, NJ is a leading staffing provider helping job seekers find work with a wide variety of local businesses. Because we're locally owned, we live in and work in this community and have a vested interest in its success. In addition to our staffing services, our team is actively involved with a wide variety of causes and organizations that help strengthen our beautiful city. Our Vision: To help as many people as possible find good jobs by helping as many clients as possible find good people. Express Employment Professionals of Somerset, NJ is a leading staffing provider helping job seekers find work with a wide variety of local businesses.\r\n\r\nBecause we're locally owned, we live in and work in this community and have a vested interest in its success. In addition to our staffing services, our team is actively involved with a wide variety of causes and organizations that help strengthen our beautiful city.\r\n\r\nOur Vision:\r\nTo help as many people as possible find good jobs by helping as many clients as possible find good people.

Job Description PLEASE READ JOB DESCRIPTION & DUTIES CAREFULLY BEFORE APPLYING This is a seasonal position (October thru January). We'll work with your schedule if needed. Hours: Mornings and Afternoons Mon-Fri with option to work Saturdays and Sundays We are looking to hire crews ASAP! Awesome ownership, great hours, flexible and competitive pay. Job Description: Install outdoor holiday lighting on residential and commercial properties. This also includes taking down lights in January and any service calls, as necessary. Duties and Responsibilities: • Must be comfortable and safe while working on ladders (in all weather conditions), • Must be comfortable working outside all day and in all weather conditions, • Must be comfortable working on houses and different types of roof tops, • Must be willing and able to perform manual labor up to 8 - 12 hours per day, • Maintain excellent customer service skills, • Ability to lift between 50 - 100lbs, • Hands on training will be provided Job Qualifications: • High School Diploma/GED, • 1 year of general labor or construction preferred, • Reliable transportation to and from our warehouse in West Orange, NJ Other Information: Decorate With Lights of North Central NJ is a seasonal operation, owned and managed by Dan Smith of Mosquito Shield of North Central NJ. There will be opportunities in the 2022 season (April - October) for Mosquito Shield technicians as well. • For more info about Decorate With Lights of North Central NJ, click here., • For more info about Mosquito Shield of North Central NJ, click here.

Job Description Direct Support Professional (DSP) Alpine Learning Group Make a Difference Every Day At Alpine Learning Group, our Direct Support Professionals (DSPs) empower autistic adults to build independence, develop life and employment skills, and participate meaningfully in their communities. If you are compassionate, dependable, and passionate about helping others reach their goals, we would love to hear from you. Position Summary As a Direct Support Professional, you will provide direct support and instruction to autistic adults in our center, throughout the community, and at volunteer or employment sites. You will implement individualized teaching plans, support positive behavior strategies, collect data to monitor learner progress, and help individuals develop the skills they need to lead fulfilling and independent lives. This is a full-time, 40-hour-per-week position reporting to the Clinical Supervisors and the Director of Adult & Transition Services. Responsibilities Provide direct support to learners in center-based, community, volunteer, and employment settings. Implement individualized instructional and behavioral support programs. Provide job coaching at supported employment and volunteer sites. Teach functional, vocational, communication, and independent living skills using evidence-based instructional strategies, including: Discrete Trial Teaching Chaining Prompting techniques (modeling, manual guidance, and verbal prompting) Incidental Teaching Systematic Desensitization Implement behavior reduction and behavior support programs. Collect, summarize, and report learner data. Supervise assigned learners throughout the day. Collaborate with supervisors and clinical staff to contribute to individualized instructional and treatment plans. Report emergencies, incidents, and injuries according to Alpine Learning Group policies and procedures. Attend staff meetings, professional development opportunities, and required crisis intervention training. Recommend materials, equipment, and supplies that support learner success. Perform additional duties as assigned by the Clinical Supervisors, Director of Adult & Transition Services, or Executive Director. Services may be provided on-site, in-home, through distance learning, or in a combination of these settings as determined by program needs. Qualifications Required High School Diploma or equivalent Valid New Jersey Driver's License Ability to work a full-time, 40-hour schedule Preferred Experience working with individuals with autism Experience supporting adults with disabilities Experience working with individuals with developmental disabilities Desired Skills Strong communication and interpersonal skills Ability to work effectively with individuals of diverse backgrounds and support needs Comfort using educational technology, including tablets and computers Commitment to maintaining confidentiality Reliable attendance and punctuality Ability to successfully complete Alpine Learning Group's required training program Demonstrates professionalism and good moral character Physical Requirements This is an active, hands-on position requiring the ability to: Walk, stand, sit, and occasionally run throughout the day Lift and assist learners as needed Demonstrate fine and gross motor coordination while providing instruction and guidance Supervise learners in a variety of settings Assist with movement and physical support during crisis intervention when necessary Maintain the vision, hearing, and communication skills needed to safely support learners Background & Employment Requirements Employment is contingent upon successful completion of all required federal, state, Division of Developmental Disabilities (DDD), and Alpine Learning Group clearances, including: Criminal History Background Check Motor Vehicle Review Citizenship/Employment Eligibility Verification Central Registry Review Drug screening as a condition of employment In accordance with Department of Human Services (DHS) and DDD regulations, this position is also subject to random drug testing. Refusal to participate in required testing may result in termination of employment. Why Join Alpine Learning Group? At Alpine Learning Group, you will join a collaborative team dedicated to providing exceptional support and meaningful opportunities for autistic individuals. Our staff are passionate about fostering independence, promoting growth, and creating positive outcomes for every learner we serve. If you are looking for a rewarding career where your work makes a meaningful impact every day, we encourage you to apply.

Job DescriptionDescription: Job Opportunity: Direct Support Professional (DSP) - Residential Services -Weekday Evenings, Weekends and Overnights - No Day Shifts! Location: Hudson County Company: Hudson Milestones Hudson Milestones - About Us: We are a 501 (c) 3 non-profit organization servicing the Hudson County Area for 75 years, seeks to build and maintain Hudson County based organization dedicated to care, support and advancement of people with intellectual/developmental disabilities and their families towards achieving, to maximum extent possible, the individual’s lifegoals and establishing self- sufficiency in community. Come work for 2025, 2024 & 2022 NJ Top Workplaces winner! Job Type: Full-Time & Part-Time Weekday (Evenings/Overnights) Weekend (Day/Evening/Overnights) Salary Range: $18.50 to $20.00 hourly rate Benefits: • We offer a comprehensive benefits package for full-time employees that may include:, • Health, dental, and vision insurance, • 401(k) with company match after one year of employment, • Paid time off (vacation, sick days, & personal time), • Family Medical Leave Other Compensation (if applicable): • Bonuses and/ or incentives at the discretion of the Agency. Job Description: The Direct Support Professional role is a Non-Exempt position requiring ability in implementing training programs and maintaining a safe environment for adults with intellectual /developmental disabilities (I/DD) for the purpose of increasing the extent to which they are independent, integrated members of the community. All tasks must be implemented in a humane and competent manner. The Direct Support Professional role is not specific to one location, building, classroom, day habilitation or group home. The Agency reserves the right to change the employee’s work location at it’s discretion. Responsibilities: • Responsible for reading, knowing and complying with all appropriate governing documents to include contracts, agency policies and procedures, State or Federal standards, specific program operations manuals and circulars both internal and external., • Ensures compliance with the agency’s Operations and Personnel Manuals and the Division of Developmental Disabilities Standards Manual., • Completes and submits in a competent, and timely manner all reports, forms, and documentation as required by the agency and Division of Developmental Disabilities., • Understands basic developmental disabilities and learning styles, using motivation techniques to help clients improve in areas with behavioral or medical challenges., • Must complete all CDS trainings and refreshers as directed., • Attend staff meetings, all other relevant meetings and training as directed., • Assist clients with goal outcomes established on the Individual Service Plan (ISP)., • Responsible for reading the ISP and working within the documented expectation for client development., • Provides a consistent means of relaying accurate and complete information to direct supervisors., • Implement behavior management strategies to promote positive behaviors and reduce challenging behaviors according to plans that are in place., • Provides training and supervision to clients in all aspects of community experience living., • Serves as a positive role model for clients and other staff., • Provides safe transportation in agency vehicles for clients as necessary., • Maintains confidentiality and professionalism when communicating with family members or group home staff, Support Coordinators and any outside agency personnel., • Maintains active, positive engagement with clients at all times., • Always ensures the safety and well-being of clients., • Provide direct care and support to individuals with disabilities or special needs., • Proactively accompany and support clients during medical appointments, ensuring relevant information is provided to the healthcare professional. Clearly and accurately communicate details from the appointment to the Residential Coordinator, Medical Compliance Officer, and/or designee., • Follow and demonstrate understanding of medication policy and procedures in the monitoring and administration of the client’s medications. Completes Medication Error Report when needed., • Ensures home, grounds, yard and van are maintained in clean, safe, and sanitary condition., • Ensures meals are prepared and planned based on clients’ individual diet, client input, and the planned menu for the month., • Ensures that the Recreation Calendar is carried out as per client input and as per the planned calendar completed each month., • Responsible for competing all required documentation to include but not limited to, daily logs, communication logs, and behavior reports., • Ensures line of sight for the individual(s) being supported is maintained and completes reports accordingly., • Responsible for adequately and completely cleaning the home during any shift worked., • Ensures that a client’s dignity is not compromised in any way., • Responsible for reporting all emergencies or unusual incidents to direct supervisor., • Cooperates with the licensee and Department staff in any inspection, inquiry or investigation. Requirements: Valid New Jersey Driver’s License High School Diploma or Equivalence Minimum 21 years of age Experience with developmentally/intellectually disabled individuals American Red Cross CPR & First Aid Trained a plus

Company: Fusion Medical Staffing Location: Facility in Glen Ridge, NJ Job Details Fusion Medical Staffing is seeking a skilled Cardiac Cath Lab RN for a 13-week travel assignment in Glen Ridge, NJ. As a member of our team, you'll have the opportunity to make a positive impact on the lives of patients while enjoying competitive pay, comprehensive benefits, and the support of a dedicated clinical team. Required Qualifications: • One year’s recent experience as a Cath Lab RN, • Valid RN license in compliance with state regulations, • Current BLS (AHA/ ARC) Certification, • Current ACLS Certification Preferred Qualifications: • PALS or ENPC Certifications, • RCIS certification, • Other certifications and licenses may be required for this position Summary: The Travel Cath Lab RN provides specialized care for patients undergoing cardiac catheterization and interventional treatments. The RN prepares patients for procedures, assists during interventions, and monitors immediate post-procedure recovery. Working closely with cardiologists and cath lab teams, this role requires advanced cardiac care skills, cardiac catheterization skills, strong communication, and the ability to adapt quickly while maintaining strict safety and regulatory standards. Essential Work Functions: • Conduct assessment of patients prior to procedures, including reviewing medical history and performing physical exams, • Assist in positioning patients correctly for the procedure and ensure EKG electrodes and cardiac leads are properly placed, • Assist physicians during procedures, including the placement of catheters, wires, balloons, stents, structural heart devices, and other cardiac interventions, • Operate and monitor hemodynamic equipment, recognizing and responding to changes in cardiac rhythms and hemodynamic waveforms, • Assist in arterial and/or venous sheath removal using closure devices, manual pressure, or mechanical compression, and transport patients to the appropriate recovery area, • Monitor vital signs, ECG, and hemodynamic parameters during cardiac catheterization and interventional procedure, • Support post-procedure care, including monitoring patient recovery and ensuring a smooth transition to the next phase of care, • Maintain and troubleshoot cath lab equipment, ensuring everything is functioning properly and fully stocked for procedures, • Communicate effectively with team members, patients, families, and physicians to provide seamless care, • Adhere to hospital safety protocols, infection control guidelines, and regulatory standards, • Perform other duties as assigned within the scope of practice Required Essential Skills: • Critical thinking, service excellence, and good interpersonal communication skills, • The ability to read, write, and communicate in the English language, • Ability to read/comprehend written instructions, follow verbal instructions, and proficiency in PC skills, • Physical Abilities - Must be able to remain in a stationary position, move about, move equipment (50-100lbs), push, pull, and bend, • Interpersonal Skills - Must be able to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and professionalism, • Technical/Motor Skills - Must have the ability to grasp, perform fine manipulation, push/pull, and move about when assisting with procedures and/or using department equipment, • Mental Requirements - Must be able to cope with frequent contact with the general public and customers while meeting deadlines under pressure. Must be able to work under close supervision occasionally, as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail, • Sensory - Must possess visual acuity and ability to effectively communicate Benefits Include: • Highly competitive pay for travel professionals, • Comprehensive medical, dental, and vision insurance with first day coverage, • Paid Time Off (PTO) after 1560 hours, • Life and Short-term disability offered, • 401(k) matching, • Aggressive Refer-a-friend Bonus Program, • 24/7 recruiter support, • Reimbursement for licensure and CEUs Why Choose Fusion? At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we're always looking for people like you to join our mission. Your passion for helping others deserves a partner just as committed to supporting you — that’s why we offer day one insurance, $0 copay for mental health services, scholarships and awards, exclusive discounts, and more. From your personal recruiter to our clinical and traveler experience teams, we’re here to guide and celebrate you along your journey. You take care of others; we take care of you. Other Duties Disclaimer: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned. This job description is not a comprehensive list of all activities, duties, or responsibilities that are required of the employee for this job and is subject to change at any time with or without notice. Start your rewarding career as a Travel Cath Lab RN with Fusion Medical Staffing and join our mission to improve lives. Apply now! *Fusion is an EOE/E-Verify Employer #pb11

Job Description A forklift operator uses power industrial trucks to load, unload and move materials within a warehouse. Key duties include operating machinery, loading and unloading trucks, stacking and organizing goods, performing equipment inspections, maintaining a safe work environment, and tracking inventory. This role is essential for keeping supply chains running efficiently and safely. Core duties • Material handling: Operate forklifts, pallet jacks, and other machinery to move, stack, and sort materials and products., • Loading and unloading: Load and unload trucks, trailers, and other delivery vehicles., • Warehouse organization: Move items to and from storage areas, production lines, and loading docks, often organizing them according to specific instructions., • Inventory management: Track incoming and outgoing shipments, update inventory records, and ensure stock is rotated properly., • Safety and maintenance: Conduct daily inspections of forklifts and other equipment, report any issues, and maintain a clean and safe work area. Adhere to all safety regulations and procedures. Essential skills and qualifications • Certification: Must be a certified forklift operator., • Safety awareness: Strong attention to safety is critical, especially in fast-paced environments., • Physical stamina: The ability to perform manual tasks, sometimes including picking up items by hand, is often required., • Attention to detail: Must be able to follow detailed instructions, perform quality checks on loads, and maintain accurate records., • Coordination: Needs good coordination to operate the equipment safely and efficiently alongside other workers. Day and Night shift positions available. \nCompany Description Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. A personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees! Stop in today - and feel free to bring a friend along! Many of those employed through JobConnection Services find that their positions are temp-to-hire. Our skilled office staff works to set each employee up for success! We ensure you have a clear picture of the responsibilities of the assignment you are going to, and work as a liaison between you and the client. \r\n\r\nA personal relationship that includes constant communication with our clients makes for a pain‐free temporary or permanent placement process - and that translates to happy employees!\r\n\r\nStop in today - and feel free to bring a friend along!

Job Description JOB OVERVIEW: Greet and serve the guests according to standards. ESSENTIAL JOB FUNCTIONS: 1. Take and serve guest orders promptly and according to service manual., 2. Do all necessary set-up sidework as assigned., 3. Answer any guest questions about the menu., 4. Operate the electronic cash register/P.O.S. system (where applicable)., 5. Check food after serving it to guest to ascertain that appearance, temperature and portions are correct., 6. Perform any other job related duties as assigned. REQUIRED SKILLS AND ABILITIES: Must have the ability to communicate in English. Self-starting personality with an even disposition. Maintain a professional appearance and manner at all times. Can communicate well with guests. Must be willing to “pitch-in” and help co-workers with their job duties and be a team player. Must be able to withstand prolonged periods of standing and/or walking. Ability to lift at least 30 lbs. PERFORMANCE STANDARDS Customer Satisfaction: Our customers are what we are about. One of the keys to a positive guest experience is positive interaction with Crescent staff. It is essential that you remain professional at all times, and that you treat all guests and associates with courtesy and respect, under all circumstances. Every Crescent associate is a guest relations ambassador, every working minute of every day. Work Habits: In order to maintain a positive guest and associate experience, your work habits should always meet and strive to exceed hotel standards for work procedures, dress, grooming, punctuality and attendance. You should be adaptable to change in your work area and in hotel procedures with a willingness to learn new skills and/or improve existing ones, have the ability to solve routine problems that occur on the job and ask for help whenever you are not sure how to do something. Safety & Security: The safety and security of our guests and associates is of utmost importance to Crescent Hotels & Resorts. Every Crescent associate should adhere to the hotel security policies and procedures, particularly regarding key controls, lifting heavy objects, using chemicals, and effectively reporting safety hazards and safety concerns. NOTE: This description excludes non-essential and marginal functions of the position that are incidental to the performance of the fundamental job duties. Furthermore, the specific examples in each section are not intended to be all-inclusive. Rather, they represent the typical elements and criteria considered necessary to perform the job successfully. Other job-related duties may be assigned by the associate’s supervisor. Furthermore, this description is subject to change, in the sole discretion of the Company, and in no way creates an employment contract, implied or otherwise; each associate remains, at all times, an “at will” associate.

Job Description About Dent Wizard Dent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Automotive R&I Technician Dent Wizard has an opportunity for Technicians who will remove and install light duty automotive body parts, panels, bumpers, interiors, mirrors, emblems, tail lights, etc. What You'll Do: • Review each order, work order notes to understand repairs needed prior to beginning work on the vehicle., • Perform initial removal of assigned parts from vehicle. Document labor time on work order as it is completed., • Review work order and initial all completed repair items. Re-Assemble painted vehicle and painted parts., • Report any equipment problems or failures to management immediately. Maintain a clean and organized work environment. What You'll Need: • 1+ year body repair experience., • Regularly required to stand and walk. Frequently required to stoop, kneel, crouch, bend, squat and climb. Ability to lift 50 pounds. Manual dexterity, repetitive motion tasks. Frequent exposure to toxic chemicals. Moderate noise level. Protective equipment may be required to wear. What we Offer: • Excellent benefits – medical, dental, vision, 401(k), paid vacation, and more, • Supportive team – work with a fun, dynamic crew that’s got your back All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $20.00-$22.00/hour We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Job Description About Dent Wizard Dent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Automotive Wheel Technician – No Experience Needed! $3,000 Sign On Bonus Training: Fully Paid (Includes Travel, Food, and Transportation) Training compensation at the hourly rate, then phased combo compensation of hourly rate and commission as you move out of training and start building your customer base! Commission-based uncapped earning potential. Long-term earning potential: $60,000-$110,000+ Are you hands-on, detail-oriented, and love working outdoors? Do you like working with customers and making things happen? Join our growing team as a Wheel Technician and start a rewarding career—no experience required! What You’ll Do: • Travel to customer locations to service vehicles, • Remove tires and wheels from vehicles, • Use grinding and sanding tools to repair cosmetic damages (curb and road rash, peeling, scrapes, gouges, oxidation and bent wheels), • Paint and refinish wheels to a like-new condition, • Deliver excellent customer service and promote our services What We’re Looking For: • Toughness and grit to work outdoors in various weather conditions, • Strong customer service and sales skills to interact with customers and build accounts, • Detail-oriented with a focus on quality and safety, • Manual dexterity for repetitive-motion tasks, • Strong work ethic, self-motivation and the ability to work independently, • Vision abilities including close, distance and color vision, depth perception and ability to adjust focus, • Physical stamina to kneel, bend, squat and climb, as well as lift up to 75 pounds and work on your feet, • Valid driver’s license and good driving record, • Auto painting experience or collision repair technical school training preferred but not required What We Offer: • No experience necessary – we provide comprehensive, paid training (includes travel and lodging), • Unlimited, uncapped earning potential – the harder you work and the more you master your craft, the more you can make, • Excellent benefits – medical, dental, vision, 401(k), paid vacation, and more, • Awesome perks – tools and supplies, company vehicle, gas card, mobile phone, and more, • Independence – manage your day without micromanagement, • Supportive team – work with a fun, dynamic crew that’s got your back, • Career growth – advance to higher Tech levels or management roles, • Advancement potential into higher Tech levels (with more $) or management roles All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $21.00/ hour Why Dent Wizard: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The compensation offered for this position will depend on qualifications, experience, and geographic location. The total compensation package may also include commission, bonus or profit sharing. Sign on bonus is subject to state and local laws, terms and conditions, including employment status and length-of-service requirements. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Job Description About Dent Wizard Dent Wizard is the nation’s undisputed leader in automotive reconditioning services and vehicle protection products – and our success is the result of the great people who serve our customers. We’re stable, growing and have a strong business model, with opportunities in 43 states, 2.5 million vehicles repaired every year and more than 3,000 highly skilled employees. Help us reach new heights and receive the respect, rewards and recognition you deserve. Automotive Paint Correction Specialist $3,000 Sign On Bonus! Commission-based uncapped earning potential. First year earning potential: $45,000-$60,000 Long-term earning potential: $60,000-$110,000+ This position is 100% commission based. Actual earnings will vary based on individual performance. Do you like working with customers and being on the move? Are you interested in learning innovative paint techniques that drive value? Our Paint Defect Correction process represents our commitment to excellence, innovation, and customer satisfaction in automotive paintwork perfection. Through our comprehensive training and advanced techniques, we strive to deliver unparalleled service quality. Join our growing team as a Paint Correction Specialist start a rewarding career with uncapped earning potential! Job Summary: As a Paint Correction Specialist, you will be responsible for identifying and rectifying imperfections in automotive paintwork, such as scratches, swirl marks, oxidation, and other blemishes. Using Dent Wizard’s proprietary techniques and tools, including our Paint Defect Correction Kit, you will ensure vehicles achieve a flawless finish that meets our high standards of quality and customer satisfaction. What you’ll do: • Travel to customers to conduct thorough assessments to identify paintwork imperfections and determine the most effective correction techniques., • Perform detailed paint defect correction using machine sanding, buffing, and various paint application methods to achieve a flawless finish., • Master the use of Dent Wizard’s unique tools and techniques, including UV Clear application, to enhance paintwork appearance and durability., • Complete touch-up repairs with precision, employing a variety of application methods for different types of damage., • Educate customers on the paint correction process, setting realistic expectations for outcomes., • Ensure all services are completed efficiently, achieving same-day turnaround times to minimize vehicle downtime., • Contribute to route building efforts by maintaining high productivity and quality standards, aiming for 8-10 units per day. What we’re looking for: • Proven experience in automotive paintwork, detailing, or a related field., • Strong understanding of paint correction techniques and tools., • Excellent manual dexterity and attention to detail., • Ability to work independently and manage time effectively., • Strong communication skills, with the ability to educate and inform customers., • Commitment to ongoing training and skill development. What We Offer: • Unlimited, uncapped earning potential – the harder you work, the more you can make, • Excellent benefits – medical, dental, vision, 401(k), paid vacation, and more, • Awesome perks – tools and supplies, company vehicle, gas card, mobile phone, and more, • Independence – manage your day without micromanagement, • Supportive team – work with a fun, dynamic crew that’s got your back, • Ongoing training – including color matching systems and certifications with PPG, BASF, and more, • Clear career path – five levels from Senior Tech to World-Class Tech, with bonuses and recognition at every step All candidates selected for offer will undergo post-offer, pre-employment screening appropriate to the role. This may include, but is not limited to, a physical examination, vision assessment, background check, and drug screening. Any such screening will be appropriate for the role, the same for all employees entering the same job category, and conducted in accordance with applicable laws and regulations. The compensation offered for this position will depend on qualifications, experience, and geographic location. The starting compensation is expected to be: $23.10/Hour Why Dent Wizard: An amazing opportunity to join a growing organization, built on the efforts of hard working, innovative, and team-oriented people. The compensation offered for this position will depend on qualifications, experience, and geographic location. The total compensation package may also include commission, bonus or profit sharing. Sign on bonus is subject to state and local laws, terms and conditions, including employment status and length-of-service requirements. We offer a competitive & comprehensive benefit package including: paid time off, medical, dental, vision, and 401k match (50% on the dollar up to 7% of employee contribution). For more information on our benefit offerings, please visit our Dealer Tire Family of Companies Benefits Highlights Booklet. EOE Statement: Dent Wizard is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act*), or any other legally protected status, with respect to employment opportunities. *ADA Disclosure: Any candidate who feels that they may need an accommodation to complete this application, or any portions of same, based on the impact of a disability should contact Dent Wizard's Human Resources Department to discuss your specific needs. Please feel free to contact us at recruiting@dentwizard.com.

Job Description DAMASCUS BAKERIES Innovative Baking, Old-Fashioned Excellence www.damascusbakery.com DAMASCUS BAKERIES is a 3rd Generation Bakery founded in 1930. We have two baking facilities: Brooklyn, New York; Newark, NJ, our newer 125,000 sq. ft. facility, which is being transitioned into our primary Bakery, R&D Center and Corporate Offices. Our products include Pitas, Lavash, Wraps, Flatbreads, Pizza Crusts, Breadsticks, Sandwich Buns, and more. We have a very strong- and even historic- presence in the Metro New York market. Since 2000, we have expanded our capacity and distribution to the National Market, supplying and partnering with many of America's top QSR's, Casual Dining Restaurants, Food Service Establishments, Retail, Club and Natural Stores, Institutions, Distributors, and other Bakeries. For many of our customers, we have been the Product Development arm that has created some of America's most Successful and Award Winning Flatbreads. We are an SQF Level 3 facility that currently employs between 150-200 people, some who have been with us for more than 40 years. We are a company that thrives to "Bake a Difference". We are a company that is also responsible to its communities and environment. We are seeking a very "Project Minded" and "Pro-active" Team player to help us grow in our production department. JOB SUMMARY: Weigh ingredients according to company formula and operate robotic mixing system. Produce high quality dough and finished product by maintaining standards of quality, efficiency, food safety and personal safety. Requirements: Ø Must be able to read (English) and do basic mathematics. Ø Must adhere to company rules of conduct and operating standards. Ø Must adhere to all GMP’s and Safety regulations. Experience: Proven experience as a machine operator A plus Machinery Knowledge: Familiarity with diverse high-speed machinery and measurement tools Understanding of Production Procedures: Knowledge of food production processes Skills: Ø Ability to operate a scale and follow formula sequence. Ø Ability to work with a computer program and follow standards of operation. Ø Ability to lift up to 80 pounds. Ø Ability to follow directions and maintain attention to detail. Ø Ability to maintain in writing, detailed mixing records. Ø Ability to effectively communicate with Supervision and other operators. Job Duties: Ø Check and verify the production order with the Supervisor. Ø Input formula number, size of dough, and quantity in the batching system. Ø Check program parameters for mix time, cycle time, fermentation time, and scrap dosing. Make certain they are consistent with product requirements. Ø Adjust program parameters under the guidance of management only. Ø Fill ingredient bins with ingredients that are to be scaled. Ø Check the formula and weigh ingredients accordingly. Ø Run cleaning cycle when required. Ø Make sensory observations of dough’s and inform management of potential quality issues. Ø Maintain the mixing time, dough temperature and dough sequence as per posted standards. Ø Make manual adjustments to compensate for program malfunctions if that occurs. Ø Keep up with the flow of production and ensure the line does not run out of dough. Ø Report any and all mechanical malfunctions do not attempt repairs to equipment. Ø Maintain a clean and neat work area. \nCompany Description Damascus Bakeries, home to the Original Pita, serves delicious satisfaction through our line of artisanal flat breads. Headquartered in Brooklyn, New York, Damascus has been pleasing customers for 84 years. With grandsons Ed and Dave Mafoud at the helm, old-world traditions and new-world technology pr ... see more Damascus Bakeries, home to the Original Pita, serves delicious satisfaction through our line of artisanal flat breads. Headquartered in Brooklyn, New York, Damascus has been pleasing customers for 84 years. With grandsons Ed and Dave Mafoud at the helm, old-world traditions and new-world technology pr ... see more

Job DescriptionBenefits: • Health insurance, • Opportunity for advancement, • Paid time off, • Vision insurance, • 401(k), • 401(k) matching, • Bonus based on performance, • Dental insurance The Assembly Technician should be able to learn quickly and will have responsibility for assembling multiple types of valves. The Assembly Technician will be cross trained to perform assembly functions on all valves/products. Cross training will include the assisting on all products as well as duties in the machine shop and mold shop when needed. In addition, adherence to a job rotation schedule is required. Essential Functions: • Assemble and label all valves/products such as relief valves, ball valves, pressure regulators, etc. ranging anywhere from ½” to 4”, • Assemble and label all valves/products following specific specifications and work instructions, • Must work with all rubber seals, including EPDM, VITON, Teflon, Aflas, PFA and Kalrez, • Must work with all body materials, including PVC, CPVC, PP, GPP, NPP, PVDF, TF, and VP, • Assemble quality products that are ready for testing/shipping, • Cross train to be able to assemble all types of valves and products§ Follow all safety guidelines as outlined in the company safety manual § Perform other duties as assigned Skills/Qualifications: § High School diploma or GED required • A minimum of 2 years of proven experience as an Assembly Technician or similar position, • Proficiency with the Microsoft Office Suite is a plus, • Impeccable attention to detail§ Able to stand for more than 4 hours at a time § Able to lift 15 lbs. or more • An analytical mind with good math skills, • Great communication and interpersonal abilities, • Must be reliable and trustworthy, • Collaborate with warehouse employees and other staff to ensure business goals are met

Job DescriptionDescription: We are seeking full-time Safety Cable Assemblers to support multiple stages of our production process, including ferrule loading, cable grinding, crimping, and related assembly tasks. Assemblers will be trained on Safety Cable part numbers, specifications, quality requirements, and proper procedures for each operation. This role involves operating automated and pneumatic equipment, assembling components, and performing routine quality checks to ensure products meet all dimensional, visual, and safety standards. Assemblers are expected to maintain accuracy, consistency, and efficient workflow across all assigned tasks. Shift: Monday-Friday 3:30pm - 12:00am *Shift Differential Pay Available Essential Job Functions: Equipment Operation: Safety Cable Assemblers may perform any of the following based on assignment: Ferrule Loading • Operate automated equipment to load ferrule magazines to the correct quantity., • Monitor equipment to verify proper operation and conduct periodic checks for ferrule count and orientation., • Respond promptly to abnormal machine behavior and notify supervision or maintenance when needed. Grinding • Grind Safety Cable ends to required finished dimensions using manual-guided grinding equipment., • Perform grinding disc changeovers and monitor equipment performance., • Inspect cable ends throughout the process to ensure compliance with dimensional and visual specifications. Crimping • String ferrules on cable using automated equipment, ensuring proper orientation and feed., • Operate pneumatic presses to crimp ferrules to specification, performing visual and dimensional inspections., • Set up and adjust crimping equipment according to part numbers, tooling, and required lengths. Material Identification and Tracking • Identify and correctly handle various Safety Cable materials, including ferrules, cable types, and sleeves., • Verify part numbers, materials, and job specifications before beginning production., • Maintain accurate batch counts and document completed work as required. Communication & Collaboration: • Communicate effectively with management regarding production status, non-conformances, and material or equipment concerns., • Work cooperatively with team members to support production flow and meet daily goals. Quality & Safety Compliance: • Follow production drawings, work instructions, and part specifications for each product type., • Conduct in process inspections to ensure accuracy, consistency, and compliance with quality standards., • Immediately report any out of spec conditions, material issues, or equipment problems., • Maintain a clean, organized, and safe work area, adhering to all safety procedures.Requirements:, • Strong attention to detail required, • Ability to safely operate automated, pneumatic, and mechanical equipment required, • Ability to read and interpret part numbers, basic measurements, and technical instructions required, • Ability to follow written and verbal instructions required, • Demonstrated commitment to quality, accuracy, and consistency required, • Ability to work efficiently in a fast paced manufacturing environment required, • Ability to stand and/or sit for long periods required, • Must be able to lift a minimum of 30 lbs. required Management reserves the right to assign or reassign duties and responsibilities to this job at any time. EOE, including disability/vets

Job Description We're building 'the' Teaching Hospital for pediatric therapy — a category of one by driving excellence in outcomes, developing clinicians, building payer trust, and embedding systems across what we do. We are a very responsive employer! Occasionally our invitations for an interview go to your spam folder, so be on the lookout for our email correspondence inviting you to learn more!* We're building 'the' Teaching Hospital for pediatric therapy — a category of one by driving excellence in outcomes, developing clinicians, building payer trust, and embedding systems across what we do. Position Summary: Are you passionate about transforming the lives of children and families? Ready to soar to new heights in your career, but not sure how to gain the necessary experience? Looking for a work environment that's more fun and engaging than the latest viral video on TikTok? Look no further! Join our team at Bierman Autism Centers as a Behavior Technician/ABA Therapist and unleash your superpowers to change the world of autism therapy! Get ready to use your powers for good! As a superhero, you'll provide life-changing ABA therapy to children aged 2-12 with autism or other developmental and language delays. Join our fun and awesome team that knows how to have a good time while transforming the lives of our incredible clients. Our one-on-one approach focuses on natural play and teaching foundational skills like self-advocacy and communication – because every child deserves to shine! Why You'll Love Bierman (Saving the Day has its Perks!): • No experience? No problem! As a TOP 10 RBT training provider nationwide, we offer best-in-class training and full pay while you learn. Plus, we cover all costs for the RBT exam., • Competitive Pay: We value your skills and expertise, even if you're new to ABA!, • Full Time/Center Based Schedule: We are open Monday through Friday from 8:15 am to 4:45 pm. No travel needed!, • Brag-worthy Benefits: 13 days of paid time off plus paid holidays, 401k with match!, Health, Dental, and Vision Insurance, Short- and Long-Term Disability, Life Insurance, Pet Insurance, HSAs, FSAs, and more. Your friends will be jealous! (Psst... we have a generous employee referral program too!), • Employee Discount: Are you feeling hungry? As a Bierman employee, you get a FREE DashPass license, which waives delivery fees on all DoorDash orders over $12 and reduces service fees by 10% on each order!, • Growth Galore: Propel your personal and professional development with on-site training, student supervision, tuition reimbursement, and student loan assistance., • Bierman University: Our exclusive 6-12 month career elevation program offers mentorship, customized coursework, and hands-on training to advance to a Team Lead., • Career Paths: Fast-track your journey to becoming a Board Certified Behavior Analyst (BCBA) or Clinical Leader., • Good Vibes Only!: Join our team of passionate, empathetic, and supportive superheroes who make work feel like a joyous adventure every day. Enjoy optional engagement events like Spirit Weeks, Pajama Days, Trivia Nights, Monthly Wellness Competitions, and more. Even heroes deserve to have fun! What Growth Opportunities are available for me as a Behavior Technician with Bierman? • PROPEL is our innovative career advancement program designed to elevate the careers of our dedicated Behavior Technicians by providing clear ways to advance while working as a Behavior Technician! After advancing through Propel, you have the opportunity to become a Team Lead and follow the track to become a BCBA or other career path opportunities throughout the organization. We LOVE to promote from within and the sky's the limit when it comes to advancing your career!, • Eligibility for merit increases as you progress through the program, • Feedback, coaching, and career advancement Who is this role great for? • This position is perfect for those who have or are pursuing an education in psychology, social services, early education, or any behavior sciences, or those who have experience as daycare / preschool workers, paraprofessionals, DSPs, nannies, babysitters, or anyone who loves to work with kids! What happens after I Apply? • All of our recruiters have been in your shoes before as Behavior Technicians! A recruiter will reach out to you to schedule a 30 minute virtual interview, so check your email for an interview invitation. After that, you will be invited into your local Bierman center for an onsite interview to meet our wonderful staff and your future coworkers! You'll also have an opportunity to shadow a current Behavior Technician to see us in action and understand more about the role and duties! Your Daily Adventures as a Behavior Technician: • Conduct 1:1 therapy with clients (your future BFFs!), • Follow prescribed skill acquisition and behavior support plans, • Collect and record data, and write therapy notes for each session, • Communicate with parents and caregivers regarding the client's progress (with guidance from the BCBA), • Assist the BCBA in preparing and organizing client materials, • Maintain and acquire functional and technical knowledge by attending required trainings, • Follow the guidelines set forth by the Behavior Analyst Certification Board (BACB), • Work towards becoming a Registered Behavior Technician (RBT), if not one already, • Foster a positive working environment, maintaining good vibes! Requirements Behavior Technician (RBT) Basic & Essential Functions: • Must hold an active Registered Behavior Technician (RBT) certification or obtain RBT certification within 90 days of hire and maintain the certification in good standing throughout employment., • Must be able to lift and carry clients who are least 30 pounds, • Must be willing and able to restrain/hold/transport and utilize quick body movements as indicated in the Behavior Support Plan in the course of working with children with challenging behavior, • Must be able to assume and maintain a variety of postures including kneeling, squatting, crouching, crawling, sitting, standing, bending, for extended periods of time., • Must be able to walk and run to chase clients and maintain a three-foot distance at all times, • Must be able to sit on the floor or stand for extended periods of time, • Must be able to attend to basic needs such as feeding, diapering, toileting, and dressing, • Must have manual dexterity to perform specific computer and electronic device functions for data collection and session documentation, • Must have visual acuity to read and comprehend written communication though computer, electronic devices, and paper means., • Must be able to take written data and transfer to electronic files or data base systems, • Must be able to maintain prolonged periods of working on a computer while sitting at a desk or on the floor, • Must be able to assemble, clean and maintain therapy space including toys and furniture, • Must be able to administer medication to clients Behavior Technician (RBT) Job Requirements: • High School Diploma or equivalent. College degree preferred., • Strong verbal and written communication skills., • Ability to manage multiple tasks., • Detail oriented., • Ability to be flexible and adaptable to meet the needs of the team and clients., • Ability to act with integrity, professionalism. Preferred Experience: • Experience working with children ages 2-12 in a classroom, day care, 1:1 setting, or instructional childcare setting., • Experience implementing the principles of Applied Behavior Analysis; Educational or Allied Health. Apply today! We can't wait to review your application and for you to join our team! Our Story: A Legacy of Progress, Fueled by Play In 2006, Bierman Autism Centers began with a simple dream: to empower children with autism to thrive. We believed in the power of letting kids be kids and initially offered in-home care to foster a comforting and familiar environment. We were driven by three core beliefs: achieving remarkable progress with children, creating a great team that enjoys working together, and building a workplace that fosters internal career paths and growth for our team members. Our dedication to progress led us to a pivotal moment. Recognizing the potential of center-based care, we opened our first center in Indiana in 2010. This wasn't just about location; it shifted our philosophy. Centers allowed us to create consistent, nurturing environments tailored to each child's needs. This shift became the cornerstone of our success. Today, Bierman Autism Centers are beacons of innovative care across Arizona, Indiana, Massachusetts, New Jersey, North Carolina, Ohio, and Rhode Island. We offer ABA therapy, Speech Therapy, Occupational Therapy and Diagnostic Services within center-based settings designed for the comprehensive development of our children. Job Type: Non-Exempt, Full Time Pay is competitive and based on candidate qualifications and experience. Full-time employees will be offered our comprehensive benefits including Paid Time Off, 401k, insurance (health, dental, and vision), and the option of Short and Long-Term disability insurance. By submitting your application to Bierman, you are opting into receiving communications from Bierman. Bierman Autism Centers values diversity in the workplace. The company provides equal opportunity for employment and promotion to all qualified employees and applicants on the basis of experience, training, education, and ability to do the available work without regard to race, religion, color, age, sex/gender, sexual orientation, national origin, gender identity, disability, marital status, veteran status, genetic information, ancestry or any other status protected by law. Furthermore, Bierman is committed to providing an equal opportunity workplace that is free of discrimination and harassment based on national origin, race, color, religion, gender, ancestry, age, sexual orientation, gender identity, disability, marital status, veteran status, genetic information, or any other status protected by law. As an equal opportunity employer, Bierman does not discriminate against qualified individuals with disabilities. If you require a reasonable accommodation as a candidate for employment, please inform a member of the Talent Acquisition team. Pay Range $20—$23 USD In 2006, Bierman Autism Centers began with a simple dream: to empower children with autism to thrive. We believed in the power of letting kids be kids and initially offered in-home care to foster a comforting and familiar environment. We were driven by three core beliefs: achieving remarkable progress with children, creating a great team that enjoys working together, and building a workplace that fosters internal career paths and growth for our team members. Our dedication to progress led us to a pivotal moment. Recognizing the potential of center-based care, we opened our first center in Indiana in 2010. This wasn't just about location; it shifted our philosophy. Centers allowed us to create consistent, nurturing environments tailored to each child's needs. This shift became the cornerstone of our success. Today, Bierman Autism Centers are beacons of innovative care across Arizona, Indiana, Massachusetts, New Jersey, North Carolina, Ohio, and Rhode Island. We offer ABA therapy, Speech Therapy, Occupational Therapy and Diagnostic Services within center-based settings designed for the comprehensive development of our children.

Job DescriptionDescription: The Dental Assistant reports to the site manager and Assistant Site Manager (if applicable) with clinical oversight from SVP of Dental Services, SVP of Nursing, and Chief Medical Officer. The Dental Assistant is responsible for assisting the dentist(s) and dental hygienist(s) in the direct provision of primary care dental services to patients of the Zufall Health Center (ZHC). The Dental Assistant is also responsible for sterilization, preparation, and inventory control of all instruments and supplies. Essential Functions, Duties, and Responsibilities • Serves as dentist’s or dental hygienist’s chair-side assistant, • Prepares operatory for patient treatment as per ZHC protocols and the dentist’s or dental hygienist’s directions, • Assists patients in resolving minor difficulties, answering their questions, and giving directions to patients as authorized by the dentist or dental hygienist, • Exposes and develops dental radiographs in accordance with the state regulations and law as well as ZHC directive and protocol, • Performs independent procedures as delegated and directed by the dentist in accordance with the state regulation and law and ZHC directive and protocol, • Maintains dental Department equipment in accordance with manufacturer’s instructions for use and, • Dental Department policy and protocol, • Maintains all Dental Department areas in compliance with Dental Department directives and protocols as well as ZHC policies and procedures relative to infection control, blood borne pathogens, exposure control, and safety issues, • Maintains all dental department’s materials, equipment, and ensures the sterility of all clinical material and equipment in accordance with the products standards, ZHC infection control policies, Association for the Advancement of Medical Instrumentation (AAMI) and The Joint Commission (JC) standards, • Maintains adequate operatory supplies and compiles a list of individual item shortages for inventory control and ordering purposes, • Maintains a list of all Dental Department patients, monitors patient flow, and assists the SVPof Dental, • Services, dentist(s) and dental hygienist(s) in ensuring that all patient records and documents are properly and accurately completed and filed, • Receives and places work-related telephone calls consistent with professional matters, clinic business and ZHC patient care needs, • Assist with various clinical and administrative functions of the center as appropriate., • Ensures the proper disposal of all contaminated or potentially contaminated materials in accordance with, • Dental Department directive, ZHC policy as well as state and federal regulation(s), • Performs all functions in full compliance with ZHC and the Dental Department Blood Borne Pathogens, • Exposure Control plan including but not limited to the use of Personal Protective Equipment and Universal Precautions, • Participates in appropriate health promotion / disease prevention activities, both on-site and off-site as required, • Travels between sites when required to meet ZHC needs, • As directed by a supervisor, performs other related and/or necessary tasks to achieve organizational and programmatic goals and objectives, • Responsible for maintaining personal compliance with all applicable federal, state, local and ZHC rules., • Follows all regulations, protocols and procedures including but not limited to participating in the provision of clinical dental care, as well as workplace safety, public health, and patient confidentiality in keeping with HIPAA rules and regulations, • Conducts routine testing of dental units, • Available to provide proper coverage of auxiliary staff, when staff calls out sick, providing lunch and late coverage, • Demonstrates and teaches new staff, students, interns, and volunteers the use of equipment and proper dental protocol as it relates to patient care, • Works in patient intake areas as needed, • Performs other duties as assigned Requirements: • Requires a comprehensive knowledge of dental assisting techniques and procedures for all phases of general dentistry, • Knowledge of modern dental materials, their storage, handling, and applications is required., • Completion of accredited course in dental assisting preferred, • Ability to attend to multiple tasks at the same time and prioritize assignments and responsibilities to ensure compliance with established deadlines and protocols, • The Dental Assistant must be able to creatively work with other health care professionals from a variety of disciplines to achieve maximal results for the center’s patient, • Effective oral and written communication skills in English are required, • Effective oral communication skills in Spanish required, • The Dental Assistant must be cognizant of the expectations and concerns of the center’s dental patients and be able to respond in an empathetic and professional manner, • The ability to work with people from diverse social, ethnic, and economic backgrounds is necessary, • Working under stressful conditions as well as irregular hours may be required, • Frequent exposure to communicable diseases, body fluids, toxic substances, medicinal preparations, radiation, and other conditions common to a clinical environment may routinely be encountered, • Prolonged sitting or standing may be required, • Those physical movements and the degree of mobility, manual dexterity and hand-eye coordination normally associated with dental assisting in the general practice of dentistry will be performed on a repetitive basis, • The ability to distinguish between letters and symbols and the ability to utilize telephones, computer terminals and copiers are required, • Learn and apply the trauma informed care principles with the scope of the position Education, Training and Experience • High school diploma or GED certificate, • Certified Dental Assistant preferred, • Registered Dental Assistant preferred, • Current CPR (BLS) required, • Valid Radiology license in NJ, • Fluent in both English and Spanish required, • Knowledge of Microsoft Office, typing, and use of electronic medical records are required

Job Description New Jersey Oral & Maxillofacial Surgery https://northjerseyoralsurgery.com/index Surgical Assistant – Oral Surgery Full-Time | Paramus | This position is based in the office. It is not hybrid or remote. Position Highlights: Step into the fast-paced world of oral surgery as an Oral Surgeon Surgical Assistant! Your role is pivotal, aiding surgeons with precision during procedures and meticulously documenting patient care. From preoperative tasks to maintaining sterile environments, your expertise ensures smooth operations. Engage in strategic discussions with surgeons, monitor patient status, and handle advanced equipment with finesse. Dive into the heart of dental care, obtaining vital radiographs and crafting detailed patient narratives. Who We Are: Our practice is dedicated to exceptional oral surgery in a comforting environment, prioritizing patient needs through collaboration with their general dentist. Our vision is global leadership in oral health, focusing on outstanding patient experiences and industry standards. We foster a positive work environment with career growth opportunities, comprehensive benefits, and a supportive culture that values work-life balance. Our goal is to empower employees to deliver excellent patient care and build strong relationships with referring dentists. What We Offer: We prioritize your personal and professional well–being, covering aspects from health to financial and social welfare. • Health, Dental, Vision, Life Insurance, • Paid Time Off, • 401k, • Short & Long-Term Disability, • Employee Assistance Program, • National Discount and Rewards Marketplace, • BLS/CPR Certification, • Career Path Advancement to clinical or management positions Required Qualifications: • A high school diploma or equivalent, • BLS Certification (or completed within 1 month of hire), • Strong teamwork and independent work capabilities, demonstrating good judgment and critical thinking., • Passion for ensuring safety and exceptional attention to detail, vigilance, and meticulousness., • Basic computer proficiency., • Excellent manual dexterity and superior listening skills, especially in emergency scenarios. Preferred Qualifications: • Previous oral surgery experience is beneficial., • DAANCE certification is desirable., • Licensed dental assistant status is preferred., • Radiology certification is a plus. Paradigm Oral Health is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, sex, age, national origin, disability, genetic information, sexual orientation, gender identity and protected veterans’ status.

Job Description Shipping & Receiving / Warehouse Associate Location: Clifton, NJ Schedule: 36–40 hours per week Pay: $19.00–$22.00 per hour, based on experience and qualifications Benefits Available Safas Corporation, a manufacturing company located in Clifton, NJ, is seeking an experienced Shipping & Receiving / Warehouse Associate to join our team. This position is responsible for day-to-day shipping and receiving activities, including preparing outgoing shipments, receiving incoming materials, loading and unloading trucks and containers, and safely moving materials throughout our facility. The position also requires familiarity with the requirements for shipping Hazardous Materials (HazMat) via UPS, LTL/common carrier, and international freight. Responsibilities: • Prepare and process daily UPS and/or FedEx shipments, • Prepare HazMat shipments for UPS and LTL/common-carrier transportation, • Assist with the preparation of international/export shipments, including HazMat shipments, • Prepare, pack, label, mark, and stage outgoing freight shipments in accordance with applicable shipping requirements, • Prepare and review shipping documentation, including packing lists and bills of lading, • Receive incoming deliveries and verify materials against shipping documents, • Load and unload trucks and shipping containers, • Operate propane, pneumatic-tire and manual forklifts safely and efficiently, • Move drums, pallets, raw materials, and finished goods throughout the warehouse and production facility, • Palletize and secure products for domestic and international shipments, • Maintain an organized and safe warehouse and shipping/receiving area, • Follow company safety procedures and proper material-handling practices, • During slower shipping and receiving periods, assist with general warehouse responsibilities, including factory supplies, pallet repairs, warehouse organization, material movement, and other related duties Requirements: • Prior shipping and receiving / warehouse experience, • Forklift experience required, including experience operating pneumatic-tire forklifts, • Experience with UPS and/or FedEx shipping systems, • Experience with LTL/common-carrier freight shipments, • Experience loading and unloading trucks and freight containers, • Ability to safely handle drums, pallets, and other industrial materials, • Ability to perform physical warehouse work, including standing, bending, lifting, and moving materials throughout the workday, • Basic computer skills and ability to complete shipping documentation accurately, • Dependable attendance, attention to detail, and ability to work as part of a team Highly Preferred Qualifications: • Working knowledge of HazMat shipping requirements for UPS and LTL/common-carrier shipments, • Current or previous Hazardous Materials (HazMat) / DOT shipping training or certification, • Experience preparing HazMat shipping papers, labels, markings, and packaging, • Experience with international/export shipping procedures and documentation, • Experience with international dangerous-goods shipments, • Experience working in a manufacturing or industrial environment Hours & Compensation: This position is approximately 36–40 hours per week, Monday through Friday. Pay range is $19.00–$22.00 per hour, based on experience and qualifications. Candidates with strong HazMat, LTL, and international shipping experience may qualify toward the higher end of the range. Benefits include: • Paid holidays, • Paid vacation and sick time, • 401(k), • Health insurance options, • Dental and vision benefits, • Other company benefits available to eligible employees We are looking for someone who is reliable, safety-conscious, organized, detail-oriented, and comfortable working in an active manufacturing and warehouse environment. Safas Corporation is an Equal Opportunity Employer. \nCompany Description 36+ year NJ Manufacturing that makes decorative granules and coatings for various industries worldwide. 36+ year NJ Manufacturing that makes decorative granules and coatings for various industries worldwide.

Job Description JOB SUMMARY: To properly count and place baked products into plastic packaging. Ensure proper sealing of the plastic, and proper count and orientation in trays or boxes. Requirements: Ø Must be able to read (English) and do basic mathematics. Ø Must adhere to company rules of conduct and operating standards. Ø Must adhere to all GMP’s and Safety regulations. Ø Must be able to withstand working in a warm environment. Skills: Ø Ability to stand and work on feet for long periods. Ø Ability to lift up to 30 pounds. Ø Ability to count and display manual dexterity. Ø Ability to keep up with the fast pace of production. Ø Ability to follow direction and maintain attention to detail. Ø Ability to effectively communicate with Supervision and other operators. Job Duties: Ø Insert bagel balls into Uni-fillers and fill at a rate of 30 balls a minute Ø Insert bags into a heat sealer ensuring the proper closure of the bag. Ø Inserting Bagel Balls into Bags without smearing any cream cheese on bag. Ø Insert Bagel Ball bags into Boxes. Ø Stacking boxes on pallets according to the established configuration. Ø Maintain excellent housekeeping, including sweeping, wiping and dusting equipment and throwing out garbage. ADDITIONAL RESPONSIBILITIES AND DUTIES: Ø Other duties assigned by Management. \nCompany Description Damascus Bakeries, home to the Original Pita, serves delicious satisfaction through our line of artisanal flat breads. Headquartered in Brooklyn, New York, Damascus has been pleasing customers for 84 years. With grandsons Ed and Dave Mafoud at the helm, old-world traditions and new-world technology pr ... see more Damascus Bakeries, home to the Original Pita, serves delicious satisfaction through our line of artisanal flat breads. Headquartered in Brooklyn, New York, Damascus has been pleasing customers for 84 years. With grandsons Ed and Dave Mafoud at the helm, old-world traditions and new-world technology pr ... see more

Job Description Join Our Team as a Production Sorter! Are you dependable, hardworking, and looking for a stable full-time opportunity? We are seeking motivated Production Sorters to join a growing facility in Lincoln Park, NJ. If you enjoy hands-on work and thrive in a fast-paced warehouse environment, we want to hear from you! Shift: 5:00 a.m. - 1:00 p.m. The Sorter role involves manually sorting items and conducting quality checks to ensure accuracy and compliance with standards. This position requires physical stamina and attention to detail to efficiently handle sorting tasks within a production line setting. Responsibilities • Perform manual sorting of items according to established procedures, • Identifies left over material and prepares them for stacking and disposal., • Conduct quality checks to ensure sorted items meet standards, • Lift and move items as necessary to facilitate sorting and organization Qualifications • Strong attention to detail, • Ability to safely lift and carry up to 50 lbs., • Ability to push/pull, squat, twist, and turn without adverse physical injury, • Physical stamina and ability to perform manual tasks We're hiring immediately and looking for candidates who are ready to start work right away. If you're dependable, safety-focused, and ready to join a great team, submit your application now!

Experienced Manual Machinist needed for an established industrial equipment manufacturer! $28–$30/hour, 70% employer-paid medical coverage including family coverage, 401(k), and hands-on precision machining.This Jobot Job is hosted by: Sean Pool Are you a fit? Easy Apply now by clicking the "Quick

Job Description Tatte began with a simple belief: great food has the power to bring people together. What started in a home kitchen has grown into a collection of bakeries and cafés inspired by Eastern Mediterranean and Levant traditions, where handcrafted food, exceptional coffee, warm hospitality, and beautiful spaces create moments of connection every day. Our mission is simple: To Inspire, Care For, and Nurture Life. Every Day. THE ROLE Our Baristas create welcoming experiences for every guest while handcrafting high-quality coffee beverages with care, consistency, and attention to detail. You’ll provide exceptional hospitality, prepare beverages according to Tatte recipes and standards, and maintain a clean, organized, and fully stocked bar. We are looking for team members who: • Have engaging, warm, and welcoming communication skills, • Have a passion for hospitality and coffee, • Enjoy working as part of a team and helping wherever needed, • Live Tatte’s core values and support our mission, • Have flexibility to work mornings, afternoons, evenings, weekends, and holidays, • Ideally have at least 1 year of barista experience using manual espresso equipment in a fast-paced cafe or restaurant environment KEY RESPONSIBILITIES • Welcome guests and provide exceptional hospitality, • Prepare handcrafted espresso beverages according to Tatte recipes and standards, • Answer guest questions about coffee and cafe offerings, • Operate espresso machines and bar equipment safely and efficiently, • Maintain a clean, organized, and fully stocked bar station, • Deliver beautiful, high-quality coffee beverages with consistency, • Perform other duties as assigned QUALIFICATIONS & EXPERIENCE • Passion for hospitality, coffee, and teamwork, • Strong communication and guest service skills, • Ability to thrive in a fast-paced cafe environment, • At least 1 year of experience using manual espresso equipment in a fast-paced cafe or restaurant environment is preferred ESSENTIAL FUNCTIONS / WORKING CONDITIONS • Strong communication skills, • Ability to work in a fast-paced environment, • Ability to reach, bend, and lift overhead, • Ability to lift, move, and carry 50+ pounds, • Ability to stand and walk for 8+ hours per shift OUR BENEFITS & PERKS • Competitive Pay: $13.25–$16.25/hour, depending on experience, plus tip share (typically $10–$15/hour), • Health, dental, and vision insurance for full-time team members, • 401(k) with company match, • Paid vacation time, • Paid sick time, • Flexible schedules with no late nights, • 50% meal discount and 2 complimentary beverages per shift, • Free mental health support, • Free Employee Assistance Program (EAP), • An inclusive community that offers potential for growth Learn more about us at tattebakery.com Please note that Tatte is an E-Verify employer.

Job Description Our front of house team members welcome and care for guests in our cafes. Counter team members will have a working knowledge of all Tatte products, delivering delicious savory dishes and pastries, operating the point-of-sale register, and keeping a clean and organized workspace, while our baristas show off their artistic coffee skills by handcrafting delicious and creative coffee beverages. We expect our front of house team members to: • Engaging, warm, and welcoming communication skills and presence, • Have a passion for and deep knowledge of our coffee menu, our bakery and savory offerings, and genuine hospitality, • Have a desire to help where needed and work as part of a team, • Live from Tatte’s core values and help Tatte deliver on its mission, • Have flexibility to work a variety of shifts, including weekends, holidays, & afternoons/evenings, • (Ideally, barista team members also have at least 1 year of experience as a barista using manual espresso equipment in a fast-paced restaurant/cafe) Summary of Counter Team Members’ Primary Responsibilities • Provides gracious and high-quality service to our guests by, among other things, welcoming guests to our cafes and engaging with them throughout their experience, • Determine guests' needs by asking questions and sharing product knowledge, • Has comprehensive knowledge of all Tatte products, • Takes guests’ orders using our point-of-sale system/register, • Executes all Tatte product and packaging standards, • Delivers coffee beverages and food to guests, • Maintains clean and well-stocked café stations, • Actively maintains and supports café cleanliness and visual/brand standards, • Complies with and follows all safety and sanitation standards at all times while adhering to our policies and procedures, • Other duties as assigned Summary of Baristas’ Primary Responsibilities • Provides gracious and high-quality service to our guests by, among other things, welcoming guests to our cafes and engaging with them throughout their experience, • Has comprehensive knowledge of all Tatte products, • Prepares and serves or delivers beverages according to Tatte recipes and specifications, • Answers guests' questions about our offerings, • Follows all recipe and presentation standards for our beverages, • Operates all Barista station equipment according to standards, • Keeps the bar (including bar equipment) clean and sanitary in accordance with applicable standards and well-stocked with inventory, • Delivers beautiful and artistic espresso beverages, • Other duties as assigned Essential Functions/Working Conditions for FOH Positions • Strong communication skills, • Ability to work in a fast-paced environment, • Able to grasp and reach overhead, • Must be able to lift, move, and carry 50+lbs, • Must be able to work 8+ hours a day on feet Our Benefits and Perks • Competitive Pay: Counter Team Members earn $11.50–$14.00/hour plus tips. Baristas earn $13.25–$16.25/hour plus tips., • 401(k) (with a vesting match), • Health, dental and vision insurance for full-time team members, • Vacation time (after 1 year of full-time service), • Paid sick time, • Free employee assistance program services, • Flexible schedule with no late nights, • Free drinks and generously discounted meals, • Exciting potential for growth Join us on our journey to create something special! Please note that Tatte is an E-Verify employer.

Job DescriptionDescription: GENERAL SUMMARY: The Custodian performs custodial, maintenance and delivery services in and around the facility, troubleshoots, performs minor repairs and responds to emergency calls for service, implements setup and take down for a wide variety of meetings, works closely with employees and the public to meet the custodial needs of the organization, and resolves problems to ensure efficient and safe operations. HOURS: Monday-Friday 7:00am-1:00pm PAY: $18.00/Hr PRINCIPAL DUTIES AND RESPONSIBILITIES: • Picks-up and delivers items such as documents, packages, run errands, etc. as required between the Diocese of Paterson, the various Catholic Family & Community Services sites and other locations., • Follows a daily/weekly detailed schedule of cleaning the floors, offices, bathrooms, kitchen and coffee., • Attends to emergencies when necessary., • Safely operates all vehicles and other job related equipment., • Disposes of garbage/rubbish/recycling., • Performs preventative maintenance in and around the facility. Fixes and repairs minor damages and reports any problems that require professional assistance., • Reports any major breakage or loss or shortage of equipment and supplies., • Does frequent inspections of facility, particularly in the early morning and late afternoon. Ensures that there are adequate supplies., • Ensures that equipment and tools used in cleaning/repairing are secure and in good condition., • Stores detergent and other toxic substances in a secure place., • Unloads deliveries when required and moves furniture, equipment, supplies and tools on an as needed basis., • Locks and unlocks assigned facilities when not in use checking for unlocked doors and window, report any unauthorized occupants, turn off lights etc., • Responsible for other duties that may be assigned from time to time to support the effective and efficient operation of Catholic Charities., • Must be able to wax and refinishing floor., • Must be able to fix minor plumbing and electrical. ABILITY TO: Operate manual and power equipment; perform physical labor; understand and carry out verbal and written directions; maintain cooperative working relationships demonstrate sensitive to and respect for a diverse population. KNOWLEDGE OF: Methods of maintaining, cleaning and preserving a variety of surfaces; proper use of a wide range of chemicals according to regulations; and handling and disposing of materials and trash with care. Requirements: • High School diploma or GED., • One year of custodial and maintenance experience., • Must have valid Driver’s License and an acceptable driving record., • Ability to work independently and in an orderly manner with minimal supervision., • Must be able to work weekends when needed, and all special events.

Job Description About role: Our client - A large automotive logistics and vehicle processing company is hiring for the role of Parts Accessory Installer in the location of Newark, NJ. This is a Direct hire opportunity. Job Title - Assembler/ Parts Accessory Installer Work Schedule - Monday–Friday, 7:00 a.m.–3:20 p.m. Pay starts at $17 per hour Overtime and weekend shifts may be required based on operational demands. Position Summary The Parts Accessory Installer at FAPS is responsible for safely moving vehicles from the staging area to the Production Shop, installing vehicle accessories in accordance with manufacturer specifications, and ensuring all work areas are clean, organized, and safe at the end of each shift. Minimum Qualifications • High school diploma or GED equivalent., • At least six months of automotive technical training or hands-on mechanical experience., • Valid U.S. driver's license., • Ability to obtain and maintain a Port Access Card issued by the New Jersey State Police., • Experience driving both automatic and manual transmission vehicles. Essential Duties and Responsibilities • Safely operate vehicles while transporting them from the staging area to the designated Production Shop work area, following all required safety procedures., • Identify the correct accessories by retrieving the appropriate accessory stickers and documenting them on the installation worksheet., • Gather, organize, and prepare accessory kits before beginning installation., • Install vehicle accessories according to manufacturer guidelines and established procedures., • Complete accessory installations outdoors when operational needs require it., • Keep work areas clean, organized, and free of hazards while complying with company safety policies and procedures., • Perform additional duties and responsibilities as assigned. Physical Requirements and Working Conditions • Ability to work in confined spaces and areas with limited room to maneuver., • Ability to lift, push, and/or pull materials weighing up to 40 pounds., • Ability to stand, kneel, bend, and perform repetitive physical tasks for extended periods., • Willingness to work in varying temperatures and weather conditions, including heat, cold, rain, and other outdoor elements. Additional Information This job description outlines the primary responsibilities and qualifications associated with the position but is not intended to include every possible duty. Employees may be assigned other related tasks as necessary to support business operations. This position does not provide employment-based visa sponsorship. External candidates must be legally authorized to work in the United States. \nCompany Description You will be working with a leading company specializing in the development and manufacturing of advanced optical communication products and fiber-optic networking solutions that enable high-speed internet connectivity, telecommunications, broadband networks, and AI-powered data center infrastructure. You will be working with a leading company specializing in the development and manufacturing of advanced optical communication products and fiber-optic networking solutions that enable high-speed internet connectivity, telecommunications, broadband networks, and AI-powered data center infrastructure.

Job Description Position Description: Company History:Dr. Praegers was founded in 1994 with the mission to bring delicious frozen food to everyone. Its not every day that two heart surgeons get into the food business, but over 20 years ago thats exactly what our dads did. Motivated by what they saw in their practice, our parents set out on a mission to encourage sensible eating. They knew ingredients had to be nutritious and simple, that everything had to be delicious, and that their products needed to be super simple to make. While the world has changed since our little family business first got started, our focus remains true to our dads vision and we work every day to make them proud. To learn more visit: Dr. Praeger's HistoryResponsibilities: \tPerform thorough cleaning and sanitization of all production equipment, work areas, and facilities, ensuring compliance with company standards and health regulations. \tDisassemble, clean, and reassemble machinery and equipment as needed. \tEmpty and sanitize waste containers, dispose of trash, and ensure proper recycling practices. \tMaintain inventory of cleaning supplies and submit purchase requests when necessary. \tReport any equipment malfunctions or maintenance issues to the appropriate department. \tAdhere to safety protocols and wear appropriate personal protective equipment (PPE) while performing duties. \tFollow standard operating procedures (SOPs) for cleaning and sanitizing to maintain a hygienic and safe work environment. \tMonitor and maintain cleanliness in Productions areas, and other common areas. \tAssist with other duties as assigned by the supervisor or management. Requirements: \tHigh school diploma or equivalent. \tProven experience in industrial/production environment sanitation or janitorial work is preferred. \tKnowledge of cleaning chemicals, procedures, and best practices. \tAbility to follow instructions and work independently with minimal supervision. \tStrong attention to detail and ability to maintain high cleanliness standards. \tPhysical stamina to perform manual labor and lift heavy objects, if required. \tExcellent time management skills and ability to meet deadlines. \tExcellent communication and interpersonal skills. Physical requirements: \tAbility to lift and carry at least 50 lbs. \tMust be able to stand/walk for extended periods of time and frequently push, pull, bend, and reach. Skills (required): \tStrong communication skills. \tAbility to work in a team environment. \tBilingual preferred. Disclaimer: Employee must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodation will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. Dr. Praeger's Sensible Foods is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Our management team is dedicated to this policy with respect to recruitment, hiring, placement, promotion, transfer, training, compensation, benefits, employee activities and general treatment during employment. $18.00 - $18.00 Hourly

Job DescriptionUtility Service / Fueling Associate - Para-Transit Operations Are you dependable, hands-on, and comfortable working in a fast-paced transportation environment? We are looking for a Utility Service / Fueling Associate to help keep our para-transit fleet fueled, clean, safe, and ready for daily service. In this role, you will support daily yard operations, fuel island activity, vehicle inspections, light maintenance, and overall facility cleanliness. This is a great opportunity for someone who takes pride in keeping operations moving and enjoys active, hands-on work. $19.00/hr based on union CBA What You'll Do As a Utility Service / Fueling Associate, you will play an important role in preparing vehicles and supporting the daily flow of para-transit operations. Responsibilities include: Opening the lot and checking para-transit parking areas to ensure vehicles can be dispatched on time Repositioning vehicles as needed to maintain safe and efficient traffic flow in the yard Opening and operating the fuel island Taking accurate fuel stick and meter readings Completing daily fuel inventory sheets and required fuel reports Monitoring fuel levels and notifying management when deliveries are needed Following proper procedures during fuel deliveries, including pre- and post-delivery readings Checking and filling vehicle fluids, including oil, antifreeze, power steering fluid, transmission fluid, brake fluid, and windshield washer fluid Inspecting belts, tires, and vehicles for damage during fueling or scheduled checks Reporting vehicle damage, tire issues, or maintenance concerns immediately Maintaining spill response supplies and assisting with spill containment procedures when necessary Cleaning vehicle interiors and exteriors to help maintain a clean and professional fleet Performing light building and grounds maintenance, including yard cleanup, grass, weeds, and other assigned projects Supporting additional operational needs as assigned by management What We're Looking For The ideal candidate is reliable, safety-minded, and able to manage multiple tasks throughout the day. You should be comfortable working outdoors, communicating with team members, and following established procedures. Minimum Qualifications High school diploma or equivalent Ability to prioritize tasks and manage time effectively Strong attendance and punctuality Ability to interact professionally with drivers, employees, customers, management, client representatives, union officials, and the public Ability to work extended hours as needed, including weekends and holidays based on business needs Physical Requirements and Work Environment This is an active, hands-on position that requires working outdoors in seasonal weather conditions. Candidates must be able to: Work in wet, cold, hot, or changing outdoor conditions Stand, bend, stoop, crouch, squat, and kneel while performing inspections and other duties Use full hearing, speech, and vision abilities Use hands and fingers for paperwork, equipment, and basic manual tasks Write clear, legible reports Drive a company or personal vehicle for work-related purposes when required Why This Role Matters Every safe and on-time trip starts with a vehicle that is fueled, clean, inspected, and ready to go. In this role, your work directly supports drivers, passengers, and the overall success of para-transit operations. Disclaimer This job description is intended to describe the general nature and level of work being performed. It does not restrict management's right to assign or reassign duties and responsibilities at any time. Language Requirement This role requires English proficiency. Federal, state, and local requirements, including U.S. Department of Transportation (DOT) regulations, require training, safety communications, company policies, employment documents, and other job-related communications be conducted in English. First for a reason: At First Student, we are a family of 60,000+ employees who take pride in safely transporting more than 5 million students and passengers to and from their destinations each day! Our family of brands include Transco, Total Transportation, Maggies Paratransit, and GVC II. Our employees are at the forefront of safety and innovation; they create and implement the most advanced training and technology the transportation industry has to offer. In the state of Washington, all technician and driving positions, including but not limited to van drivers and any other position requiring employees to drive a company-owned vehicle, are considered safety-sensitive and are therefore subject to drug and alcohol testing, including cannabis. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. First is also committed to providing a drug-free workplace. First will consider for employment qualified applicants with criminal histories consistent with the requirements of the San Francisco Fair Chance Ordinance, Los Angeles Fair Chance Ordinance, and any other fair chance law. Philadelphia's Fair Criminal Record Screening Standards Ordinance Poster is at this link or upon request https://www.phila.gov/media/20210423160847/Fair-Chance-Hiring-law-poster.pdf.

Job Description Join our dedicated team at Owen Health Care as a Part-Time Certified Home Health Aide in Newark/Essex County, NJ, where your compassion and skills make a difference in the lives of our senior clients. This onsite position provides an opportunity to work closely with individuals in their own homes, fostering meaningful relationships and delivering personalized care. Experience the joy of making a tangible impact daily while working in a supportive, innovative environment that encourages excellence and integrity. Your contributions will not only enhance the quality of life for our clients but also allow you to grow professionally in a forward-thinking organization that values high performance. Your commitment to empathetic care is essential to our mission. You will be given great benefits such as 401(k). Be part of a team that is dedicated to making every day brighter for those we serve. Apply today and elevate your career in home health care! Owen Health Care: Our Mission Owen Health Care is a state-licensed agency and is accredited by The Joint Commission as a health care agency. We provide compassionate, quality, and affordable health care services to adults with mental health, substance abuse, and co-occurring disorders, as well as to all individuals with disabilities-including children and the elderly. In our organization, we are passionate about helping people, dedicated to the health and well being of all the clients we serve, and committed to ensuring the best quality of care. Our licensed clinicians and highly qualified professionals are trained to provide the highest quality, compassionate care. What it's like to be a Certified Home Health Aide at Certified Home Health Aide As a Part-Time Certified Home Health Aide at Owen Health Care in Newark/Essex County, NJ, you will be instrumental in delivering compassionate care under the guidance of a professional Nurse or Therapist. Your responsibilities include assisting clients with personal hygiene tasks such as bathing, oral care, and dressing, while also ensuring their safety by observing and reporting any hazards or significant changes in their condition. You will participate in staff meetings and complete required training, contributing to a culture of excellence. Maintaining patient confidentiality is paramount, as is your ability to follow both written and oral instructions. You will document vital signs and provide support with activities of daily living (ADLs), such as ambulation, transportation, and socialization. Collaboration with the RN is key, particularly in reporting patient complaints and abnormal findings, ensuring the highest quality of care for our clients. Would you be a great Certified Home Health Aide? To excel as a Part-Time Certified Home Health Aide at Owen Health Care, a range of skills and capabilities are essential. Effective communication is paramount; employees must possess sufficient clarity of speech and hearing to interact successfully with clients and team members. Visual acuity and observational skills are necessary for reviewing important information in both electronic and print formats. Manual dexterity is required to operate essential equipment, including personal computers and telephones. Additionally, candidates should demonstrate sufficient personal mobility and physical reflexes, enabling them to lift, move, or assist clients as needed. This role also necessitates the ability to navigate a general office environment and travel to various field sites, ensuring flexibility in delivering care. Ultimately, a successful candidate will combine technical proficiency with a compassionate approach to patient interactions, aligning with our core values of empathy and excellence in senior care. Make your move If this sounds like the right job for you, don't wait - apply today to join our team. We look forward to hearing from you! Job Posted by ApplicantPro

Job Description Purpose of Your Job Position The primary purpose of your position is to provide direct nursing care to the residents, and to supervise the day-to-day nursing activities performed by CNAs/GNAs and other nursing personnel. To monitor the performance of CNAs/GNAs, nursing and non-licensed personnel, provide education and counseling, perform disciplinary action as necessary, and complete performance evaluations. Such supervision must be in accordance with current federal, state, and local standards, guidelines, and regulations that govern our Center, and as may be required by the Director of Nursing Services or Nurse Supervisor to ensure that the highest degree of quality care is maintained at all times. Duties and Responsibilities Administrative Functions Direct the day-to-day functions of the CNAs/GNAs or other nursing personnel in accordance with current rules, regulations, and guidelines that govern the long-term care Center. Ensure that all assigned nursing personnel including CNAs/GNAs comply with the written policies and procedures established by this Center. Periodically review the department’s policies, procedure manuals, job descriptions, etc. Make recommendations for revisions. Provide discipline and evaluations of assigned CNAs/GNAs and other nursing personnel in accordance with current rules, regulations, and guidelines that govern the Center. Issue verbal and written disciplinary warnings to assigned CNAs/GNAs and other nursing personnel for violations of current rules, regulations, and guidelines of the Center. Meet with your assigned nursing personnel, including CNAs/GNAs, as well as support personnel, in planning the shifts’ services, programs, and activities. Ensure that the Nursing Service Procedures Manual is current and reflects the day-to-day nursing procedures performed in this Center. Ensure that all nursing service personnel comply with the procedures set forth in the Nursing Service Procedures Manual. Make written and oral reports/recommendations concerning the activities of your shift, as required. Cooperate with other resident services when coordinating nursing services to ensure that the resident’s total regimen of care is maintained. Ensure that all nursing service personnel are in compliance with their respective job descriptions. Participate in the maintenance and implementation of the Center’s quality assurance program for the nursing service department. Participate in Center surveys or inspections made by authorized government agencies, as may be requested. Periodically review the resident’s written discharge plan. Participate in the updating of the resident’s written discharge plan, as required. Assist in planning the nursing services portion of the resident’s discharge plan, as necessary. Interpret the department’s policies and procedures to personnel, residents, visitors, and government agencies, as required. Admit, transfer, and discharge residents, as required. Complete accident/incident reports, as necessary. Provide information to the Billing Office as necessary to insure accurate resident billing. Perform administrative duties such as completing medical forms, reports, evaluations, studies, charting, etc., as necessary. Education Must possess, at a minimum, a Nursing Degree from an accredited college or university, or graduate from an approved LPN/RN program. Experience Not applicable. On-the-job training provided. Specific Requirements Must possess a current, unencumbered, active license to practice as an RN or LPN in this state. Must be able to read, write, speak, and understand the English language. Must demonstrate knowledge and skills necessary to provide care appropriate to the age-related needs of the residents served. Must be a supportive team member, contribute to and be an example of teamwork and team concept. Must possess the ability to make independent decisions when circumstances warrant such action. Must possess the ability to deal tactfully with personnel, residents, family members, visitors, government agencies/personnel, and the general public. Must be knowledgeable of nursing and medical practices and procedures, as well as laws, regulations, and guidelines that pertain to nursing care facilities. Must possess leadership and supervisory ability and the willingness to work harmoniously with and supervise other personnel. Must be able to evaluate the performance, initiate disciplinary actions, and prepare and complete performance evaluations for personnel. Must possess the ability to plan, organize, develop, implement, and interpret the programs, goals, objectives, policies and procedures that are necessary for providing quality care. Must have patience, tact, a cheerful disposition and enthusiasm, as well as the willingness to handle difficult residents. Must be willing to seek out new methods and principles and be willing to incorporate them into existing nursing practices. Must be able to relate information concerning a resident’s condition. Must not pose a direct threat to the health or safety of other individuals in the workplace. Must possess basic computer knowledge.

Job Description Purpose of Your Job Position The primary purpose of your position is to provide direct nursing care to the residents, and to supervise the day-to-day nursing activities performed by CNAs/GNAs and other nursing personnel. To monitor the performance of CNAs/GNAs, nursing and non-licensed personnel, provide education and counseling, perform disciplinary action as necessary, and complete performance evaluations. Such supervision must be in accordance with current federal, state, and local standards, guidelines, and regulations that govern our Center, and as may be required by the Director of Nursing Services or Nurse Supervisor to ensure that the highest degree of quality care is maintained at all times. Duties and Responsibilities Administrative Functions Direct the day-to-day functions of the CNAs/GNAs or other nursing personnel in accordance with current rules, regulations, and guidelines that govern the long-term care Center. Ensure that all assigned nursing personnel including CNAs/GNAs comply with the written policies and procedures established by this Center. Periodically review the department’s policies, procedure manuals, job descriptions, etc. Make recommendations for revisions. Provide discipline and evaluations of assigned CNAs/GNAs and other nursing personnel in accordance with current rules, regulations, and guidelines that govern the Center. Issue verbal and written disciplinary warnings to assigned CNAs/GNAs and other nursing personnel for violations of current rules, regulations, and guidelines of the Center. Meet with your assigned nursing personnel, including CNAs/GNAs, as well as support personnel, in planning the shifts’ services, programs, and activities. Ensure that the Nursing Service Procedures Manual is current and reflects the day-to-day nursing procedures performed in this Center. Ensure that all nursing service personnel comply with the procedures set forth in the Nursing Service Procedures Manual. Make written and oral reports/recommendations concerning the activities of your shift, as required. Cooperate with other resident services when coordinating nursing services to ensure that the resident’s total regimen of care is maintained. Ensure that all nursing service personnel are in compliance with their respective job descriptions. Participate in the maintenance and implementation of the Center’s quality assurance program for the nursing service department. Participate in Center surveys or inspections made by authorized government agencies, as may be requested. Periodically review the resident’s written discharge plan. Participate in the updating of the resident’s written discharge plan, as required. Assist in planning the nursing services portion of the resident’s discharge plan, as necessary. Interpret the department’s policies and procedures to personnel, residents, visitors, and government agencies, as required. Admit, transfer, and discharge residents, as required. Complete accident/incident reports, as necessary. Provide information to the Billing Office as necessary to insure accurate resident billing. Perform administrative duties such as completing medical forms, reports, evaluations, studies, charting, etc., as necessary. Education Must possess, at a minimum, a Nursing Degree from an accredited college or university, or graduate from an approved LPN/RN program. Experience Not applicable. On-the-job training provided. Specific Requirements Must possess a current, unencumbered, active license to practice as an RN or LPN in this state. Must be able to read, write, speak, and understand the English language. Must demonstrate knowledge and skills necessary to provide care appropriate to the age-related needs of the residents served. Must be a supportive team member, contribute to and be an example of teamwork and team concept. Must possess the ability to make independent decisions when circumstances warrant such action. Must possess the ability to deal tactfully with personnel, residents, family members, visitors, government agencies/personnel, and the general public. Must be knowledgeable of nursing and medical practices and procedures, as well as laws, regulations, and guidelines that pertain to nursing care facilities. Must possess leadership and supervisory ability and the willingness to work harmoniously with and supervise other personnel. Must be able to evaluate the performance, initiate disciplinary actions, and prepare and complete performance evaluations for personnel. Must possess the ability to plan, organize, develop, implement, and interpret the programs, goals, objectives, policies and procedures that are necessary for providing quality care. Must have patience, tact, a cheerful disposition and enthusiasm, as well as the willingness to handle difficult residents. Must be willing to seek out new methods and principles and be willing to incorporate them into existing nursing practices. Must be able to relate information concerning a resident’s condition. Must not pose a direct threat to the health or safety of other individuals in the workplace. Must possess basic computer knowledge.

Job DescriptionJob description Overnight Weekend Supervisor LPN/RN Part time Position at Atlas Healthcare at Daughters of Miriam Purpose of Your Job Position: The primary purpose of your position is to provide direct nursing care to the residents, and to supervise the day-to-day nursing activities performed by CNAs and other nursing personnel. To monitor the performance of CNAs, nursing and non-licensed personnel, provide education and counseling, perform disciplinary action as necessary, and complete performance evaluations. Such supervision must be in accordance with current federal, state, and local standards, guidelines, and regulations that govern our Center, and as may be required by the Director of Nursing, Assistant Director of Nursing, or Nurse Supervisor to ensure that the highest degree of quality care is maintained at all times. Overnight Weekend Supervisor LPN/RN Duties and Responsibilities: Administrative Functions • Direct the day-to-day functions of the CNAs or other nursing personnel in accordance with current rules, regulations, and guidelines that govern the long-term care Center., • Ensure that all assigned nursing personnel including CNAs comply with the written policies and procedures established by this Center., • Periodically review the department’s policies, procedure manuals, job descriptions, etc. Make recommendations for revisions., • Provide discipline and evaluations of assigned CNAs and other nursing personnel in accordance with current rules, regulations, and guidelines that govern the Center., • Issue verbal and written disciplinary warnings to assigned CNAs and other nursing personnel for violations of current rules, regulations, and guidelines of the Center., • Meet with your assigned nursing personnel, including CNAs, as well as support personnel, in planning the shifts’ services, programs, and activities., • Ensure that the Nursing Service Procedures Manual is current and reflects the day-to-day nursing procedures performed in this Center., • Ensure that all nursing service personnel comply with the procedures set forth in the Nursing Service Procedures Manual., • Make written and oral reports/recommendations concerning the activities of your shift, as required., • Cooperate with other resident services when coordinating nursing services to ensure that the resident’s total regimen of care is maintained., • Ensure that all nursing service personnel are in compliance with their respective job descriptions., • Participate in the maintenance and implementation of the Center’s quality assurance program for the nursing service department., • Participate in Center surveys or inspections made by authorized government agencies, as may be requested., • Periodically review the resident’s written discharge plan. Participate in the updating of the resident’s written discharge plan, as required., • Assist in planning the nursing services portion of the resident’s discharge plan, as necessary., • Interpret the department’s policies and procedures to personnel, residents, visitors, and government agencies, as required., • Admit, transfer, and discharge residents, as required., • Complete accident/incident reports, as necessary., • Provide information to the Billing Office as necessary to insure accurate resident billing., • Perform administrative duties such as completing medical forms, reports, evaluations, studies, charting, etc., as necessary. Overnight Weekend Supervisor LPN/RN Education: Must possess, at a minimum, a Nursing Degree from an accredited college or university, or graduate from an approved LPN/RN program.

Job DescriptionSample Manufacturing Associate – Full-Time Temp-to-Hire Pay: $19.25/hour Schedule: Monday–Friday, 6:00 AM–2:30 PM Alternative Schedule: 8:30 AM–5:30 PM may be available on a case-by-case basis Job Type: Full-Time, Temp-to-Hire Interview: Resume review and interview required prior to placement Position Overview We are seeking a reliable, detail-oriented Sample Manufacturing Associate to join our Sample Manufacturing department on a full-time, temp-to-hire basis. The ideal candidate is someone who follows instructions carefully, maintains strong attention to detail, and is comfortable learning to operate manufacturing equipment. Previous machine operating experience is not required, as training will be provided. What You'll Be Doing • Manually glue Phillip Jeffries samples while meeting daily production goals, with an expected output of approximately 200 samples per hour., • Select master samples according to daily picking lists and provide them to machine operators as needed., • Accurately refile master samples at the end of each shift and upon completion of sample runs., • Receive incoming products and properly store materials in designated warehouse locations., • Become cross-trained on the guillotine and other equipment as needed., • Assist with sample gluing and other related production tasks., • Operate equipment safely and effectively following training and established procedures., • Maintain and clean all necessary equipment., • Keep work areas clean, organized, and free of debris., • Assist the Sample Manufacturing Assistant Manager with additional tasks as assigned.What You Bring to the Table, • Previous warehouse experience preferred., • Strong attention to detail and ability to follow instructions., • Ability to multitask and prioritize responsibilities., • Excellent time management and follow-through skills., • Reliable attendance and punctuality., • Strong verbal and written communication skills., • Ability to work effectively both independently and as part of a team., • Basic computer skills., • High level of integrity., • Respectful, courteous, and professional attitude., • Ability to work effectively in a fast-paced, team-oriented environment., • Experience with WMS systems is a plus., • Willingness and ability to learn how to operate manufacturing equipment.Physical Requirements, • Ability to stand for extended periods of time., • Ability to lift and move materials weighing 50–100 pounds., • Ability to perform repetitive manual tasks., • Ability to work in a fast-paced manufacturing environment.#ZR

Job Description Now Hiring: Production Helper in Clifton, NJ! A growing manufacturing facility in Clifton, NJ is looking for a dependable Production Helper to join our fast-paced team. No experience required—we train you! What you will do: • Assist with production machinery operation and prep., • Perform basic routine equipment maintenance checks., • Ensure a safe, clean, and compliant workspace. What we need from you: • Ability to follow instructions closely and learn quickly., • Physical strength to handle manual labor (lift up to 50 lbs)., • Great teamwork, communication skills, and high attention to detail., • High school diploma or GED. Perks: Paid on-the-job training, competitive pay, and stable full-time hours. Hours Monday - Friday 7:30am-4:00pm Union benefits, health insurance, PTO

Job DescriptionJoin Alpha MX Support! Alpha MX Support is proud to be NY/NJ’s premier business aviation support team. With offices at Teterboro and Morristown Airports our technicians and Mobile Repair Units travel to any of the area airports to support private jet operations of all kinds. We pride ourselves on our professionalism, exceptional communication, and drive to fix things right the first time. If you are the kind of A&P who thrives on problem solving, important time critical repairs, and working with a team of passionate mechanics please join our team! Overview: Alpha AOG technicians work a variety of fleet types in a variety of locations. Most of our work is performed in teams with crews taking a fully stocked mobile repair unit to a job and working it through to completion. Once on site, mechanics communicate with our customers maintenance controllers, troubleshoot, and repair the issue. We work on everything from simple service checks and departure supports to complex discrepancies and detailed inspections. Most of our work is performed out of TEB/MMU/HPN but we do travel to other airports withing a 75 mile radius on regular occasion. Responsibilities: • Troubleshoot technical discrepancies and execute repair of company aircraft, • Accomplish aircraft inspections per aircraft maintenance manual, • Inspect and assist in maintenance of company equipment and tooling, • Work as a member of a team to complete repairs, • Follow safety measures, good shop practices and cleanliness standards, • Communicate discrepancies to Maintenance Control department found during inspections and follow directions to troubleshoot and repair faulty conditions, • Ensure that all aircraft documentation is completed accurately per company and FAA procedures prior to aircraft departure, • Organize daily tasks and coordinate inspections/repair of aircraft, • Coordinate materials and tooling requirements for projected work for entire shift, • Additional duties assignedQualifications:, • High School Diploma or equivalent, • Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate, • Must be able to pass FAA drug test, • Must be able to pass background checkSkills:, • Must be able to read, write, fluently speak and understand the English language, • Strong analytical, interpersonal, verbal and written communication skills, • Working knowledge of Microsoft software and in use of digital manuals, • Ability to read and interpret blueprints, drawings, schematics and technical orders, • Proficient in use of electronic test equipment, voltage or amperage measuring, recording devices and navigation troubleshooting equipment, • Strong work ethic and organizational skills, • Must be able to work in variable weather conditions, • Ability to lift parts and equipment, • Able to work rotating schedules to include weekends, nights and holidays Schedule:· Your schedule will alternate weekly between Sunday through Wednesday and Sunday through Tuesday split shifts. (4 on, 3 off, 3 on, 4 off).· Technicians are “on call” without fixed hours. Compensation:· Pay will be commensurate with experience ranging from $45 per hour to $65 per hour.· All technicians will be compensated for a minimum of 80 hours per pay period (every 2 weeks) regardless of hours worked with overtime paid at 1.5X your hourly rate. Benefits:· Company sponsored healthcare, dental, and vision will be provided· 401(k) match of 4% of your annual salary · Paid time offo Techs will be granted 80 hours (10 days) of PTO per year.o On their second anniversary, PTO accrual will increase to 96 hours per year (12 days).o On their third work anniversary, PTO accrual will increase to 128 hours per year (16 days)o Up to 40 hours of PTO can be rolled over to following years.o Shift trading is permitted with supervisor approval.

Job Description Overview Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Lead Cook and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. ESSENTIAL DUTIES AND RESPONSIBILITIES: Primary duties and responsibilities include, but are not limited to the following. The Lead Cook acts as a leader in the kitchen in the absence of the Kitchen Manager/Chef, assists in some management duties and prepares and serves food for customers. • Plans and prepares food in appropriate quantities based on number of customers to be served using the Lucky Strike Entertainment operations manual and prep sheets., • Assures all food orders are prepared, presented and delivered in accordance with the Lucky Strike Entertainment operations manual., • Acts as a mentor to all kitchen staff. Trains these employees on procedures, presentation, sanitation, and safe use of all equipment and cost controls., • Maintains the sanitation and organization of cooking area, storage areas, refrigeration and serving areas according to local and Lucky Strike Entertainment guidelines., • Weekly checks the calibration of all cooking and refrigeration equipment to insure product quality and freshness., • Washes, rinses and sanitizes dishes, cooking equipment and utensils in accordance with local and state health department laws using only approved sanitation products., • Receives food and supply order, ensuring that products received are in good condition, checks proper deliver temperatures, product codes and that invoice list matches products received. Immediately puts perishable items into refrigeration rotating stock, marking cases with the delivery date and tagging USE FIRST items., • Works the food line preparing menu items, training and supervising kitchen staff by following the Lucky Strike Entertainment manual, ensuring only quality products are delivered to the customer., • Proactively ensures that a clean, safe environment is maintained at all times, • Readily assists colleagues with miscellaneous duties to prevent delays in the customer service experience., • Promptly assists and responds to all customer questions or requests by immediately taking ownership of the inquiry and guiding to resolution., • Must become certified in the Lucky Strike Entertainment specified alcohol service program within 14 days of employment and the Lucky Strike Entertainment specified food safety program within 30 days of employment., • Ability to work varying shifts, weekends and holidays, as well as, extended workdays to support business needs. WHAT IT TAKES • Lead Cooks possess a highly developed sense of customer service and interpersonal skills including high integrity, respect for all individuals (customers, vendors, and employees) and solid communication skills., • Lead Cooks must be strong team players, people developers, and the possess knowledge of and adherence to workplace safety procedures., • High School Diploma or equivalent and a minimum of three to five years of operational experience. Culinary or Food Management degree is a plus. Relevant experience or equivalent combination of education and experience is also acceptable. PERKS (MORE REASONS YOU’LL LOVE YOUR JOB) • Free Bowling!, • $1 Arcade Play, • 20% off Events, • 50% off Food & Beverages WORK ENVIRONMENT/PHYSICAL DEMANDS: • Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: • Evening shift, • Night shift Weekly day range: • Weekend availability Work Location: One location Responsibilities Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world’s premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay rate for this position is $19.00 - $21.00 per hour. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: www.bowlerocorp.com/careers/benefits Qualifications The pay rate for this position is $[OR “the pay range for this position is $ to $”]. Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: Lucky Strike Entertainment Benefits

Job DescriptionDescription: The Sushi Chef II position is a highly trained and experienced role in our organization. Identified as an expert in the art of sushi, you will be a master of knife skills, fundamentals of rolling sushi and food safety. The Sushi Chef II’s responsibilities include preparing traditional Japanese sushi rice, chopping, slicing and filleting various kinds of fish and maintaining a clean and safe work environment. To be successful as a Sushi Chef II, you should ensure that all ingredients used in dishes are of the highest quality. You will minimize waste and costs through proper utilization of resources and handling of food and equipment. Ultimately, an exceptional sushi chef should work well under pressure and maintain restaurant quality standards during assigned work hours. You will lead by example at the sushi bar ensuring necessary preparation, smooth operations and excellent customer service, engaging the customer. Key Competencies: People Skills, Expert Culinary Skills, Product Knowledge, Quality and Food Safety, Profit Knowledge and Waste Control Duties and Responsibilities: • Expert in cutting, slicing and filleting different types of fish and vegetables, • Adhering to training guide/manual specs, creating rolls based upon guidelines provided to each kiosk, • Inspecting the quality of fruits, vegetables, and fish used to prepare sushi dishes and informing the STL when quality is sub-standard, • Preparing various types of sushi dishes according to established company guidelines on quality, portion size, presentation and food safety, • Expert understanding of food waste and costs and how it impacts the goals of the kiosk, • Creating an expectation for a clean work environment in order to prevent food contamination, • Reporting any problems with kitchen equipment to the manager on duty, • Sterilizing all utensils, instruments, and equipment used in sushi preparation before every use, • Greeting and communicating with customers to ensure that they feel valued as our customer This job posting describes the general duties and responsibilities for the position. Other duties may be assigned as needed. Requirements: • Minimum of two years in the food service industry; sushi rolling experience required, • Excellent knife skills - experienced in cutting large fish for sashimi & nigiri and prepping vegetables for common sushi rolls & garnish, • Ability to read, write and communicate in English, • Demonstrated professionalism in front of the customers and respect for co-workers and workplace at all times, • Valid food handler’s license, with expert knowledge of food safety regulations, • The ability to stand for long periods of time, • The ability to work under pressure with sound judgement, • Encompass the company mission and core values Hana Group North America is an Equal Opportunity Employer

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$27.00 To $35.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Responsibilities will include proper operation of equipment, component level & final cleaning of assemblies. Some assembly work will take place when required. Following is a summary of the essential functions for this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Trained to perform cleaning, cleanliness verification, and packaging per: • S308, • S311-4 / -5 / -6 / -8, • Approved Valve-specific Engineering drawing and:, • Cleaning Procedures (CPs), • Test Procedures (TPs), • Test Reports (TRs), • Qualification Procedures (QPs), • Others as required Performs: • Pre-cleaning / bulk cleaning using pre-cleaning equipment and established methods, • Gowning / de-gowning for an ISO Class 5 cleanroom, • Precision cleaning of piece parts, kits, and assemblies, • Cleanliness verification for contamination (FOD), damage, and defects utilizing:, • Evident CIX100 Particle Counting Microscopes, • White light visual verification, • Ultraviolet visual verification, • Total Solids Analysis, • Non-volatile Residue Analysis, • Manual microscopes and video scopes, • Packaging cleaned hardware per process or hardware-specific instructions, • Maintenance checklists to monitor and maintain, • Clean environment and equipment, • Stocks of consumables (solvents, bagging plastic, gowning items, etc.), • Functional testing of electrical and pneumatic valve systems as required, • Training of new technicians and providing feedback to engineering teams for continuous improvement of documents, procedures, tooling, and methods. Salary Range:$22.00 To $30.00 Hourly Valcor Engineering Corporation is looking for individuals who are highly skilled, diligent, practical, productive, reliable, inventive, self-motivated, patient, conscientious, problem solvers, organized, cooperative, flexible and positive. Character and attitude are extremely important. All candidates must meet the US persons criteria. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. \nCompany Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionJoin Alpha MX Support! Alpha MX Support is proud to be NY/NJ’s premier business aviation support team. With offices at Teterboro and Morristown Airports our technicians and Mobile Repair Units travel to any of the area airports to support private jet operations of all kinds. We pride ourselves on our professionalism, exceptional communication, and drive to fix things right the first time. If you are the kind of A&P who thrives on problem solving, important time critical repairs, and wants to lead a team of passionate mechanics please join our team! Overview: Alpha is searching for an experienced shift lead that can manage a team of 3-6 mechanics on a 3/4 day per week shift schedule. Alpha AOG technicians work a variety of fleet types in a variety of locations. Most of our work is performed in teams with crews taking a fully stocked mobile repair unit to a job and working it through to completion. Once on site, mechanics communicate with our customers maintenance controllers, troubleshoot, and repair the issue. We work on everything from simple service checks and departure supports to complex discrepancies and detailed inspections. Most of our work is performed out of TEB/MMU/HPN but we do travel to other airports withing a 75 mile radius on regular occasion. Responsibilities: • Manage, train, and schedule the mechanics on your shift., • Troubleshoot technical discrepancies and execute repair of company aircraft, • Accomplish aircraft inspections per aircraft maintenance manual, • Inspect and assist in maintenance of company equipment and tooling, • Work as a member of a team to complete repairs, • Follow safety measures, good shop practices and cleanliness standards, • Communicate discrepancies to Maintenance Control department found during inspections and follow directions to troubleshoot and repair faulty conditions, • Ensure that all aircraft documentation is completed accurately per company and FAA procedures prior to aircraft departure, • Organize daily tasks and coordinate inspections/repair of aircraft, • Coordinate materials and tooling requirements for projected work for entire shift, • Additional duties assignedQualifications:, • High School Diploma or equivalent, • Valid Federal Aviation Administration (FAA) Airframe and Powerplant Certificate, • Must be able to pass FAA drug test, • Must be able to pass background check, • Previous leadership experienceSkills:, • Must be able to read, write, fluently speak and understand the English language, • Strong analytical, interpersonal, verbal and written communication skills, • Working knowledge of Microsoft software and in use of digital manuals, • Ability to read and interpret blueprints, drawings, schematics and technical orders, • Proficient in use of electronic test equipment, voltage or amperage measuring, recording devices and navigation troubleshooting equipment, • Strong work ethic and organizational skills, • Must be able to work in variable weather conditions, • Ability to lift parts and equipment, • Able to work rotating schedules to include weekends, nights and holidays Schedule:· Your schedule will alternate weekly between Sunday through Wednesday and Sunday through Tuesday split shifts. (4 on, 3 off, 3 on, 4 off).· Technicians are “on call” without fixed hours. Compensation:· Pay will be commensurate with experience ranging from $60 per hour to $70 per hour. ($120-$150K per year) · Leads will be eligible for monthly performance bonuses based on company productivity. ($5-$10K per year)· All technicians will be compensated for a minimum of 80 hours per pay period (every 2 weeks) regardless of hours worked with overtime paid at 1.5X your hourly rate. Benefits:· Company sponsored healthcare, dental, and vision will be provided· 401(k) match of 4% of your annual salary · Paid time offo Techs will be granted 80 hours (10 days) of PTO per year.o On their second anniversary, PTO accrual will increase to 96 hours per year (12 days).o On their third work anniversary, PTO accrual will increase to 128 hours per year (16 days)o Up to 40 hours of PTO can be rolled over to following years.o Shift trading is permitted with supervisor approval.

Job DescriptionRequest ID: 110640-1 Title: Financial Accounting Analyst Locations: Newark, NJ Duration: 6 Months Pay Range: $30 - $35/Hour on W2/C2C (All inclusive)Introduction We are looking for a detail-oriented Financial Accounting Analyst with strong Python programming skills to join our finance team. In this role, you will bridge the gap between traditional corporate finance and data science. You will automate manual reporting, handle large datasets from multiple sources, and build advanced financial models to drive business decisions. Required Skills & Qualifications • Bachelor’s degree in Finance, Accounting, Economics, Data Science, or a related quantitative field., • 6 Months to 3 years of experience in financial analysis, forecasting, or data processing., • Advanced proficiency in Python (specifically pandas, NumPy, and data visualization packages)., • Strong command of Excel (VBA, financial modeling, and pivot tables)., • Prior work experience at client or in client's Industry Applicants must be able to work directly for Artech on W2 Preferred Skills & Qualifications • Familiarity with SQL and querying databases is a plus., • Strong problem-solving abilities and clear communication skills to translate complex data into simple business stories.Day-to-Day Responsibilities, • Write and maintain Python scripts to automate daily, weekly, and monthly financial reporting and data collection., • Build and update dynamic forecasting, budgeting, and scenario-analysis models using Excel and Python., • Clean, process, and analyze large volumes of financial data using libraries like pandas and NumPy., • Partner with Accounting, Operations, and Risk Management teams to explain financial insights and support strategic resource allocation.Company Benefits & Culture, • Comprehensive health, dental, and vision insurance., • 401(k) with company match., • Opportunities for professional development and growth. For immediate consideration please click APPLY to begin the screening process with Alex.