Trabajos manufacturing management en Plainview, New YorkCrear alertas

Summary /Objective The Senior Production Manager oversees multiple product lines from procurement through production planning, ensuring accurate material planning, scheduling, and execution. This role translates sales forecasts and booking data into actionable production plans using tools such as MRP and Style Availability Reports. The Senior Production Manager develops demand and capacity plans, partners closely with Sales and suppliers, and ensures production aligns with business goals while maintaining operational flexibility. This role is responsible for optimizing inventory performance, maintaining accurate product data, and proactively identifying risks or constraints that could impact delivery timelines. Strong organizational skills, analytical thinking, and clear cross-functional communication are essential for success in this role. Position Responsibilities and Accountabilities: • Oversee the end-to-end production process across multiple product lines, ensuring all deliverables meet quality standards, production targets, and business timelines while supporting new initiatives., • Analyze sales demand using sales forecasts, booking orders, and historical sales data to develop production plans and issue vendor purchase orders that ensure a continuous supply of apparel and accessories., • Review Style Availability Reports to assess stock status and safety stock levels; proactively expedite shipments with suppliers to meet delivery and order fulfillment requirements., • Manage product costing, including target costing, counter costing, and flash costing, and support Sales with accurate and timely cost information., • Partner with Product Development to ensure raw materials and trim availability align with production timelines; prepare and present financial and production updates to senior management as needed., • Manage inventory purchasing to stay within budget and management directives by optimizing order quantities, adjusting safety stock levels, reallocating surplus inventory, and closing out excess or non-working inventory., • Coordinate fulfillment of critical backorders in collaboration with Allocation and Customer Service teams; communicate production schedules across the organization via AS400., • Monitor and report on inventory levels, material availability, and production status, advising management of potential risks, delays, or delivery issues., • Lead manufacturing planning across a multi-plant operation by aligning production requirements with factory capacity, commitments, and lead times., • Work closely with factories to balance, adjust, and re-prioritize production schedules in response to changes in demand, capacity constraints, or supply disruptions., • Monitor vendor shipping performance to ensure adherence to established delivery dates and escalate significant discrepancies that may impact customer orders., • Oversee quality assurance processes, including inspections upon shipment arrival; negotiate and issue chargebacks when products fail to meet company quality standards., • Drive continuous improvement initiatives to increase production efficiency and product quality, utilizing methodologies such as Lean Manufacturing. Qualifications and Competencies: • Strong knowledge of costing for apparel and hard goods is a must!, • Outstanding analytical and inventory modeling skills, • Organized with attention to exacting detail, • Proficient in project planning and support tools; experience in Production planning and/or project management, • Demonstrates a sense of urgency and flexibility in changing and/or ambiguous situations, • Strong interpersonal and communication skills, written and verbal, • Import experience with knowledge of Freight consolidation/Logistics, • Strong excel skills/pivot table and BI tools., • Experience in PLM systems, • Strong factory contacts and relationships. Education and Experience: • Bachelor's degree in Business, Finance, or Economics preferred., • 5 + years in Production Planning and procurement/supply chain management.

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high-performance radio frequency (RF) and microwave applications. With design, sales and manufacturing locations in over 30 countries, Mini-Circuits’ products are used in a range of wired and wireless communications applications. Our products are also used in detection, measurement and imaging applications, including military communication, guidance and electronic countermeasure systems, commercial, scientific, military land, sea and aircraft; automotive systems, medical systems, and industrial test equipment. Mini-Circuits’ sells its products to over 20,000 customers globally through our direct sales force, applications engineering staff, sales representatives, as well as through our extensive website. Position Summary: We are seeking a highly skilled SAP Production Planning (PP) Solution Specialist with expertise in SAP S/4HANA Cloud implementations and deep knowledge of SAP Activate methodologies. The ideal candidate will be responsible for designing, configuring, and optimizing SAP PP solutions to support business processes and enhance overall efficiency. This role requires a strategic thinker who can collaborate with cross-functional teams to deliver high-quality SAP implementations. Salary Range: $145,000 - $160,000 per year Locations: Melville, N.Y. Brooklyn, N.Y. Hialeah, FL. Job Function: • Lead and participate in SAP S/4HANA Cloud implementations, focusing on SAP PP module configurations and best practices., • Utilize SAP Activate methodology to drive project execution, including discovery, prepare, explore, realize, deploy, and run phases., • Analyze business requirements and translate them into functional specifications and solution designs., • Configure SAP PP functionalities, including demand management, MES, capacity planning., • Provide expertise in integration with other SAP modules such as MM, SD, and QM to ensure end-to-end process efficiency., • Collaborate with key business stakeholders to conduct workshops, user training, and change management activities., • Support system testing, including unit testing, integration testing, and user acceptance testing (UAT)., • Troubleshoot and resolve complex issues, providing post-go-live support and continuous improvements., • Keep up to date with the latest SAP S/4HANA functionalities and industry best practices. Qualifications: • Bachelor’s degree in information technology, Business, or related field., • 5+ years of experience in SAP PP implementation and support, with at least 2+ years in SAP S/4HANA Cloud., • Hands-on experience with SAP Activate methodologies and Agile project management principles., • Strong understanding of production planning, material requirements planning (MRP), shop floor execution, and capacity planning., • Experience in SAP Fiori applications and embedded analytics is a plus., • Ability to work in a fast-paced, dynamic environment with multiple stakeholders., • Strong analytical and problem-solving skills, with excellent communication and presentation abilities., • SAP PP or SAP S/4HANA certification is highly desirable. Cultural Focus: • Displays enthusiasm and Passion for their work., • Works to the standard of Uncompromising Quality by meeting or exceeding stated objectives and embracing continuous improvement., • Exercises sound Business Judgement, ensuring that efforts are on track with the Company’s goals., • Operates with the mindset of Customer Obsession – by meeting or exceeding expectations to both internal and external customers., • Takes Accountability by taking ownership and accepting responsibility for their conduct and contributions., • Demonstrates a strong sense of urgency and accomplishes tasks with Speed and attention to detail., • Cooperates, collaborates and contributes to shared goals with a strong sense of Teamwork., • Conducts themselves with Honesty & Integrity and treats all members with Trust & Respect. Benefits: • We offer a comprehensive package of benefits including [paid time off, medical/dental/vision insurance and 401(k)] to eligible employees., • Comprehensive Medica, Dental and Vision Plans, • 401k and Profit -Sharing Programs, • Disability Insurance, • Life Insurance, • Employer-Sponsored Wellness Plans, • Commuter Benefits, • Hospital & Accident Indemnity Insurance, • Employee Benefit Advocate &Employee Assistance Program Additional Requirements/Skills: • Ability and willingness to abide by Company’s Code of Conduct, • Occasional travel, some overnight, as required, • Comply, understand, and support corporate safety initiatives to ensure a safe work environment Disclaimer: The listed qualifications and requirements for each position are intended as guidelines. Mini-Circuits reserves the right to hire outside of these guidelines at Management’s discretion. Mini-Circuits is an Equal Opportunity Employer and does not discriminate on the basis of actual or perceived age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, familial status, gender identity, gender dysphoria, pregnancy-related condition, and domestic violence victim status or protected class characteristic, or any other protected characteristic as established by federal or state law.

We are seeking a hands-on, operationally focused Chief Financial Officer (CFO) to join our executive team and help lead the next phase of our company’s growth and financial evolution. This is a high-impact role for a leader who thrives in a manufacturing environment and has a proven ability to drive financial transformation, improve margins, and build scalable processes. About the Opportunity The CFO will serve as a key strategic partner to the CEO, with direct responsibility for strengthening the company’s financial infrastructure, improving visibility into performance, and driving operational efficiency. This role is ideal for a leader who can move seamlessly between strategy and execution—from board-level financial planning to rolling up their sleeves to improve processes, systems, and team capabilities. Key Priorities • In the first 12–24 months, the CFO will be expected to:, • Improve financial visibility and reporting accuracy to support faster decision-making, • Optimize the cash conversion cycle and working capital management, • Identify and execute cost reduction and margin improvement initiatives, • Strengthen internal controls and financial processes, • Enhance ERP and financial systems to support scalability, • Build and develop a high-performing finance and accounting team Core Responsibilities • Partner with the CEO and leadership team to define and execute financial strategy, • Lead budgeting, forecasting, and long-range planning processes, • Deliver actionable insights through financial analysis, KPIs, and performance metrics, • Oversee all accounting operations, ensuring accuracy, timeliness, and GAAP compliance, • Manage cash flow, liquidity, and banking relationships, • Establish and enforce internal controls, policies, and risk management practices, • Drive continuous improvement across financial and operational processes Ideal Candidate Profile • CFO or senior finance leadership experience within a manufacturing or product-based environment, • Demonstrated success leading financial transformation or operational turnaround initiatives, • Strong command of cost accounting, inventory, and working capital management, • Hands-on leadership style with the ability to operate at both strategic and tactical levels, • Proven ability to influence executive leadership and drive cross-functional alignment, • Track record of building and developing high-performing teams

Director of IT Strategy and Security We are seeking a strategic technology leader to oversee cybersecurity governance, AI strategy, vendor risk management, and digital transformation. This role drives the organization’s compliance, security posture, and AI maturity while serving as the primary liaison to the parent organization on cybersecurity and AI programs. Reporting to the VP Finance, the Director partners closely with the Director of IT (Infrastructure) and manages the Systems Administrator & Security Analyst. Key Responsibilities Cybersecurity Governance & Compliance • Lead development and maintenance of cybersecurity frameworks, policies, and procedures, • Oversee SOX IT general controls and ISO 13485 IT-related compliance, • Manage PCI DSS compliance in partnership with payment processing teams, • Conduct risk assessments, vulnerability reviews, and drive remediation, • Maintain incident response and business continuity plans, • Develop and maintain the organization’s AI governance framework, • Translate enterprise AI protection requirements into actionable policies, • Evaluate, approve, and manage the lifecycle of AI tools and platforms, • Define secure, compliant integration architectures between AI systems, ERP, and databases, • Drive AI-enabled process improvement across operations, quality, and finance, • Lead the vendor risk assessment program for all SaaS and technology procurements, • Review and negotiate technology agreements with a focus on security and compliance, • Coordinate legal reviews for contracts with data or regulatory implications, • Drive the multi‑year digital transformation and IT strategy roadmap, • Manage the IT Strategy & Security budget, • Provide executive-level reporting on cybersecurity, AI maturity, and technology risk, • 7+ years of progressive IT leadership, including 3+ years in a security or strategic role, • Expertise in cybersecurity frameworks (NIST, ISO 27001, etc.), • SOX ITGC experience in manufacturing or regulated environments, • Hands-on AI governance, AI tool implementation, and vendor AI risk assessment, • Experience defining integrations between AI platforms, ERP, and databases, • Strong vendor risk management and SaaS contract review background, • ERP experience (NetSuite preferred), • Experience in life sciences, pharmaceutical, or regulated manufacturing industries, • Familiarity with ISO 13485, • PCI DSS experience, • Strategic thinker with the ability to translate business needs into actionable technology plans, • Excellent communication skills, able to explain risk to non‑technical leadership, • Compliance‑minded with sound judgment, • Forward‑looking on AI and emerging technologies

Company For over 50 years, Hitemco has been partnering with leading edge technology companies to help make critical surfaces successful. We specialize in high performance surface coatings and understand the thin line between a critical part and the environment that it operates in. Whether it’s in aerospace, energy, minerals, or transport, we work with our customers to deliver outstanding materials knowledge, fast production turn times, reliable forecasts, and great customer service. Lincotek Group is a world leader in the coatings industry and is active, through its different operating business units, in the European, Asian and American continents Position Summary The objective of the Industrial Maintetnance Technician is to support plant production machinery and facility maintenance activities, as required. Essential Functions • Undertaking and completion of preventive maintenance activities to plant equipment utilizing the plant computerized maintenance management system., • Troubleshooting equipment problems or failures, determining the appropriate actions for repair, specifying parts and materials needed for repair, and ordering parts as required., • Developing solid, professional working relationships with all plant employees, and responding to requests for maintenance in a timely manner so as to reduce plant equipment downtime., • Must have the ability to complete repairs to equipment with minimal supervision, especially while working on the off-shifts., • Perform all planned and unplanned facility maintenance activities, • Must be knowledgable in general building maintenance, Plumbing and Electrical., • Analysis, purchase, installation and coordination for new plant/processes consumables and spare parts., • Knowledge of how to properly and safely use handheld and facility power tools and equiptment., • Performs other duties as assigned. Work Environment This job operates in both an office environment and a manufacturing environment. The role routinely uses standard office equipment, such as computers, phones and photocopiers. The individual will be required to adhere to safety policies and procedures on the manufacturing floor. Physical Demands While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand, walk, use hands to finger, handle or feel and reach with hands and arms. The employee is occasionally required to sit, climb or balance and stoop, kneel, crouch or crawl. The employee must frequently lift and/or move up to 10 lbs and occasionally lift and or move up to 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Position Type/Expected Hours of Work This is a full-time position, requiring 8 hours of work per day Monday thru Friday, some overtime as business needs change. Willing to work flexible shifts, overtime, and weekends, if necessary. Requirements • High School Diploma or GED, • Minimum of 5 years of experience performing the essential functions of the job., • Knowledge of CMMS, PLC, vacuum, electronics, welding, precision measuring instruments and ability to understand Blueprints, • Career readiness certificate (minimum silver), • Able to lift at least 50lbs, • Electrical experience and License preferred, • Forklift and Aerial Lift Certified $35-$40/hr based on experience. Lincotek Surface Solutions provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law.

Our client is looking for a Director of Quality to lead the development and implementation of the quality management system to ensure products and services meet company, regulatory and customer standards. This senior role involves overseeing quality teams and collaborating with other departments to establish overall quality and compliance. Job Function: Role and Responsibilities • Direct a staff of up to 50 people including engineers, technicians, inspectors, engineers and administrative personnel. Hire staff and provide training., • Develop and enforce quality systems to ensure compliance to consensus standards and customer requirements., • Monitor and communicate measurement of quality-related metrics to senior staff and advocate for improvements., • Communicate with customers regarding Quality compliance, complaints, audits, etc., • Collaborate with Purchasing on monitoring and improving vendor performance., • Drive continuous improvement initiatives to reduce waste, improve efficiency and drive a quality culture., • Manage budget. Job Requirement: Minimum Qualifications • Education – Bachelor’s degree in a technical or management related field., • 10 years minimum experience in a direct QA role with progressive advancement into supervisory and managerial roles., • Direct experience with FAA regulatory rules and offices in the areas of certification, Parts Manufacturing Approval. Desired Qualifications Direct experience in AS9100 or ISO 9001.

Very well-established, yet rapidly growing, mechanical machined components manufacturer servicing the medical industry, has an excellent career opportunity for an experienced Manufacturing Engineer. This is a permanent, onsite position in Plainview, NY. Position Summary: The Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. This includes researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, evaluate, and implement manufacturing processes., • Study production and machine requirements., • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with recent technology. Qualifications: • 5 years of previous experience as a manufacturing engineer in a similar machine shop environment, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g., CAD, MS Office), • Project management skills, • Bachelor's degree in mechanical engineering or related field

Wilen is driven by industry-leading agency services and cutting-edge direct mail production. We provide strategic direct marketing solutions for national brands, leveraging innovative variable data technology, to turn concepts into finished digital and physical products, all in one seamless process. We’re currently looking for an experienced Account Manager to join our team. The Account Manager is responsible for developing and maintaining strong day-to-day client/agency relationships liaising between clients and internal creative, production and technical teams on conception and execution of marketing projects ensuring on-time and on-budget completion. The seniority and title of Client relationships may vary based on Client account. In this role, the Account Manager will collaborate with senior account management to be involved in client strategic direction as well. Travel is required for this position (15%). RESPONSIBILITIES (including, but not limited to): All lawful directives of your supervisor or a member of Company management. Project Management • Day-to-day Agency lead for assigned accounts, • Maintaining daily updates in internal job tracking tool, • Maintain all scheduled deliverables and ensure campaigns remain on track, • Maintaining internal and external status reports, • Working with Production Dept. to generate estimate requests based on scope of work, • Working with Production Dept. to manage schedule requests and revisions, • Generating SOWs for Client review and approval, • Collaborate with senior account management to be involved in client strategic direction including, but not limited to, testing roadmaps, creative direction, etc., • Partner with clients on data strategy and ensure data transmittal and content is accurate, • Developing creative briefs in collaboration with a senior team member, • Scheduling and participating in internal creative reviews to ensure accuracy of creative concepts to brief, • Acquiring required client assets including artwork, guidelines, etc., • Managing the gathering of all mail data information from client, • Continuously relaying any and all pertinent information to key stake holders, • Involved in the routing and proofing process throughout the project lifecycle, and ensuring the accuracy of changes, • Developing and facilitating content-based changes in project matrix, • Ensuring accurate data entry and billing of job, • Following-up on receipt of postage, data, and mailing of job, • Generate and understanding client reporting needs, • Managing the information gathering and implementation of any client-required reporting, • Developing, maintaining and growing client relationships, • Leading, scheduling and attending client meetings/press trips whether on-site or via teleconference, • Managing client expectations to ensure jobs remain on schedule, • Managing/training an AC and/or AAM in client-specific processes, • Travel is required for this position (15%), • Additional projects and assignments may be assigned based on the needs of the company and/or department QUALIFICATIONS: • Bachelor's Degree or equivalent experience from four-year college or university is preferred., • 3+ in Account Management or Project Management (direct marketing agency experience is a plus)., • Excellent client service competence, presentation and writing skills., • Creative, self-starter, who thrives in a dynamic, fast-paced work environment., • Ability to handle and prioritize multiple tasks and projects., • Track record of working across an organization to get things done., • Ability to learn quickly and think strategically., • Proficient in Excel, Word, PowerPoint This job description is subject to change from time to time at the Company’s discretion. As a direct marketing company, there are times when client deadlines dictate additional work hours. Our employees are expected to be available beyond standard work hours when necessary. We’d love to hear your story and learn how your talents and experiences will enhance our team. You can find out more about us at wilengroup.com. This is a full-time position. We are an equal opportunity employer and a drug-free workplace. E-Verify. For New York, the expected salary range for this position is between $80,000 and $85,000. The actual compensation will be determined based on experience, geographic location, and other factors permitted by law. Wilen offers a variety of benefits to eligible employees, including health insurance coverage (Medical, Dental, Vision), paid holiday, paid time off (PTO), 401(k), and many others.

Location US-NY-Melville Company Canon U.S.A., Inc. Requisition ID 33807 Category Sales/Business Development Position Type Full-Time Workstyle Hybrid Canon USA in Melville, NY is currently seeking a Strategic Business Development Specialist (Specialist, Stratgc Bus Dvlpmt) to join Canon USA's New Business Development team and drive new ventures from concept to commercialization. Our team is composed of dedicated professionals, each leading a specific project with the mission to build a new business from the ground up, all the way to a successful Go-to-Market (GTM). In this role, you will join our dynamic team and will initially be tasked with accelerating the commercialization of one or two promising, ongoing projects in Sports & Entertainment, Advanced Manufacturing domains. Looking forward, you will also have the opportunity to develop new business ideas from scratch or take the lead on strategically selected projects sourced from our company-wide innovation platform. This is a unique opportunity to create new market value by leveraging the resources of a global enterprise while collaborating with a team of highly skilled business builders. If you are passionate about building what's next and making a tangible impact, we would love to hear from you. This position is full time and offers a hybrid work schedule requiring you to be in the office Monday, Tuesday and Wednesday and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. - Evangelizes new solution offering to marketplace • Identifies and prioritizes customer use case scenarios to align with new solution offering, • Launches new solutions through channel, • Develops sales enablement and training messaging and materials, • Identifies and recruits new Go-To-Market channel partners including system integrators, VAR's, • Formulates Win-Win go to market models that leverage expertise of Canon and partner, • Negotiates agreements with partners that reflects the partnership objectives, while also protecting Canon interests, • Develops targeted marketing and sales plans with channel partners and ensures that stated objectives are met, • Supports selling activities in other channels including direct sales, • Demonstrates Canon portfolio in partner/industry events and customer calls, • Possesses specialized knowledge or skills in a particular functional area, • A developing professional, working towards full proficiency in the job role, • Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters, • Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate - Bachelor's degree in a relevant field or equivalent experience required, plus 3 to 5 years of related experience, • Experience in solution marketing and/or business development, • Experience in product management/planning is a plus, • Entrepreneurial experience or attitudeis preferred, • Sales experience is a plus, • Excellent communication skills both verbal and written, • Presentation skills required, • Experience with Google Sheets a plus, • 10% - 15% nationwide travel We are providing the anticipated salary range for this role: $69,300 - $103,770 annually About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at and connect with us on LinkedIn at . Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site , we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at . #CUSA Hybrid - This position is full time and offers a hybrid work schedule requiring you to be in the office three days a week and an option to work from home the remainder of the week (unless a specific business need arises requiring in office attendance on other days). Note that work schedules and office reporting requirements may change from time to time based on business needs. #PM19 #LI-AV1 #LI-HYBRID We can recommend jobs specifically for you! Click here to get started.

Why Join Our Team? At Vallen, we embrace what makes us unique. We thrive on the diversity of our associates and the different ways each of us contributes to Vallen's success. We pride ourselves on being an inclusive company that values the growth of our associates. When you join Vallen, you become part of our winning team. Our vast network of connections is here to help you transform your job into a career. Vallen is an industry leader in delivering flexible supply chain solutions while creating value for our customers, our supply partners, and our associates. Benefits at Vallen • Medical, Dental, and Vision Insurance, • Medical, Dental, and Vision Insurance for Single, Employee + Spouse or Children, and Family Coverage, • 401(k) with discretionary company match of $0.50 on the $1.00 up to 6% of pay (U.S. positions only), • Employer-paid Basic Life Insurance for Employee, Spouse, and Dependents, • Employer-paid Short-Term and Long-Term Disability Benefits and Parental Leave (and any leave required under federal, state, and local laws), • Health Care and Dependent Care Flexible Spending Accounts, • Paid Time Off (Vacation and Sick Days): 80-160 hours of vacation time based on seniority, accrued monthly and prorated from date of hire. 40-56 hours of sick time per year based on seniority and advanced upon hire., • Paid Time Off (Holidays): 8 scheduled holidays plus 2 floating holidays, • Employee Assistance Program, • Employee Resource Groups for networking and team building, • Tuition Reimbursement Program, • Employee Referral Program, • Safety shoe and safety glasses reimbursement (based on position), • Employee discounts through BenefitHub, • Advancement opportunities, • Vallen complies with all minimum wage laws Join our exciting & dedicated team at Vallen as an On-site Buyer. In this position, you will work at a customer location and will be responsible for providing exceptional service by purchasing products, goods, and materials (stock and/or non-stock, or stock buy) that meet the organization's standards of price, quality, timing, and reliability of supply. Essential Job Duties and Responsibilities: • Perform procurement activities to ensure the customer's current and anticipated demand for products and materials (stock and/or non-stock, or spot buy) are met and in alignment with Vallen's purchasing strategies., • Review and approve assigned inventory forecasts produced by Vallen's inventory management or other Enterprise Resource Planning application., • Review and approve daily replenishment recommendations produced by Vallen's inventory management or other Enterprise Resource Planning application., • Assess existing orders to determine action for expediting or de-expediting for optimal delivery., • Place purchase requisitions and vendor purchase orders., • Research, assess, and make recommendations for vendors and/or specific items of request to ensure they that they comply with specifications and meet the customer's quality, pricing, and delivery standards., • Monitor the quality and timeliness of products and materials supplied; may coordinate the return of damaged goods and/or replacement items., • Negotiate and coordinate vendor returns for aging, expired, or excess inventory; coordinate other liquidation activities as required., • Follow-up on the status of purchase orders with vendors to ensure timely delivery; and communicate status of orders with customers., • Communicate with vendors to resolve problems with timeliness and product quality., • Maintain and cultivate relationships with one or more suppliers, vendors, and assigned customers., • Research and resolve account payables nonconformance with suppliers., • Identify opportunities for and document customer cost savings., • Produce customer KPI measurement data., • Follow all Vallen and customer Standard Operating Procedures., • Adhere to LEAN operating practices; ensure worksite is professional, clean and neat always. High school diploma or equivalent. Bachelor's degree in a related field (e.g., Business, Finance, etc.) preferred. 1+ years of experience in the field of Procurement preferred. CPM certification preferred. Other relevant experience includes: • Excellent customer service., • Computer skills and aptitude to learn the various Enterprise Resource Planning (ERP) and Inventory Management applications., • Mathematical aptitude for basic calculations., • Self-starter with the ability to work independently., • Strong attention to detail and accuracy., • Demonstrated strong attention to detail, organizational and execution skills., • Proficiency with MS-Office products. Reasonable accommodations will be evaluated and may be implemented to enable individuals with disabilities to perform essential functions of this position. • Long periods of time working on a computer and performing repetitive key-boarding activities., • Work may be in a manufacturing environment and could have exposure to dirt, smoke, heat, cold, etc., • Safety protection may be required while in the customer's facility (hand, foot, and eye or other as dictated by the customer's safety protocols)., • Overtime hours may be required with little advanced notice. Stay up to date with Vallen, and follow us on ___, ___ and ___. Equal Opportunity Employer - Ethnically and Culturally Diverse/Females/Veterans/Disabled/Sexual Orientation/Gender Identity

Manufacturing Company looking for Business System Analyst This Jobot Job is hosted by: John Erwin Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $100,000 - $140,000 per year A bit about us: We are a Manufacturer of Electronic Components Why join us? • Generous Compensation, • Great Benefits (Medical, Vision, Dental), • Career Growth, • PTO, • Sick Pay, • Holidays Paid Job Details Job Details: We are seeking a dynamic and experienced Business System Analyst to join our team in the Manufacturing industry. This is a permanent, full-time position where you will be responsible for analyzing, designing, and implementing business processes to improve overall business performance. You will be working with the latest technologies and tools like SQL, Linux, VB, SharePoint, Visio, CRM (KACE) and more. This role requires a high level of IT coordination, documentation, and project management skills. If you're a problem solver who loves to stay ahead of technology trends and can effectively communicate technical concepts to non-technical individuals, this could be the perfect opportunity for you. Responsibilities: 1. Analyze and evaluate current systems and structures to identify areas for improvement and propose cost-effective solutions., 2. Design and implement new systems and processes, ensuring they align with business goals and strategies., 3. Coordinate with IT and other relevant departments to ensure smooth integration and functioning of new systems., 4. Utilize SQL, Linux, VB, SharePoint, Visio, CRM, and KACE to manage, analyze, and improve business processes., 5. Document all processes, systems, and business requirements clearly and accurately., 6. Manage multiple projects simultaneously, ensuring they are completed on time and within budget., 7. Provide technical support and training to end-users, ensuring they can effectively use and benefit from the systems and tools., 8. Stay updated with the latest technologies, tools, and best practices in business systems analysis. Qualifications: 1. Bachelor's degree in Computer Science, Information Technology, Business Administration, or related field., 2. A minimum of 3- 5 years of experience as a Business System Analyst, preferably in the Manufacturing industry and storng with IT Coordination, 3. Proficiency in SQL, Linux, VB, SharePoint, Visio, CRM, and KACE., 4. Strong knowledge of IT coordination, documentation, and project management., 5. Excellent analytical and problem-solving skills, with the ability to analyze complex data and develop innovative solutions., 6. Strong communication skills, with the ability to explain technical concepts to non-technical individuals., 7. Ability to manage multiple projects simultaneously and meet deadlines., 8. Strong team player, with the ability to work effectively in cross-functional teams., 9. Continual learner, with the ability to stay updated with the latest technologies and best practices in business systems analysis. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionTop Job Located in Farmingdale, NY Salary: 27.00 The Powder Coating Department Group Lead oversees daily operations of the powder coating department in cabinet and containment manufacturing environment. This role ensures high-quality finishes on enclosures and containment products by managing workflow through SAP/MRP systems, coordinating personnel, enforcing safety and quality standards, and driving Lean/5S+1 initiatives. Key Responsibilities Team Leadership & Production • Lead, train, and coach a team of powder coaters, line operators, and support staff., • Assign daily work based on SAP picklists, Lot-by-Lot sheets, and production schedules., • Conduct pre-shift meetings to communicate goals, safety reminders, and quality expectations., • Monitor surface preparation, coating thickness, adhesion, and curing to meet cabinet and containment quality standards., • Perform in-process inspections and collaborate with Quality to resolve coating defects (e.g., fisheyes, orange peel, poor adhesion)., • Implement corrective actions and maintain Lot-by-Lot documentation., • Utilize SAP/MRP systems for production tracking, work order closures, and powder inventory management., • Record daily output, downtime, and scrap data in SAP and on production tracking boards., • Oversee the set-up, operation, and care of powder spray guns, booths, ovens, and pre-treatment systems., • Enforce OSHA and EHS safety policies, including PPE, lock-out/tag-out, and safe material handling., • Champion 5S+1 and Lean Manufacturing practices to improve efficiency and reduce waste., • Lead root cause and corrective action (RCCA) for recurring defects or equipment issues., • 5+ years in a manufacturing or finishing environment, including 3+ years in powder coating or industrial painting., • 2+ years in a lead or supervisory role, preferably within a cabinet, enclosure, or containment manufacturing setting., • Proficiency in SAP or similar MRP/ERP systems for scheduling, work orders, and inventory tracking., • Strong knowledge of electrostatic powder coating applications and pre-treatment methods., • High School Diploma or GED required., • Associate's Degree in Manufacturing Technology, Industrial Management, or related field preferred., • Powder Coating Institute (PCI) certification or OSHA training a plus., • Excellent leadership and communication abilities., • Skilled at troubleshooting powder coating defects and maintaining process consistency., • Strong organizational skills and attention to detail., • Ability to work in a fast-paced, high-temperature manufacturing environment., • Cabinet and containment finishing area with exposure to powders, chemicals, and oven heat., • Frequent standing, walking, bending, and lifting up to 50 lbs., • Required PPE includes respirators, gloves, safety glasses, and hearing protection., • Must be flexible for overtime or weekend work to meet production schedules. #2127LI Express Office: Farmingdale 565 Broadhollow Road Suite 9E Farmingdale, NY 11735

The Estée Lauder Companies Inc. is one of the world's leading manufacturers, marketers, and sellers of quality skin care, makeup, fragrance, and hair care products, and is a steward of luxury and prestige brands globally. The company's products are sold in approximately 150 countries and territories under brand names including: Estée Lauder, Aramis, Clinique, Lab Series, Origins, M·A·C, La Mer, Bobbi Brown Cosmetics, Aveda, Jo Malone London, Bumble and bumble, Darphin Paris, TOM FORD, Smashbox, AERIN Beauty, Le Labo, Editions de Parfums Frédéric Malle, GLAMGLOW, KILIAN PARIS, Too Faced, Dr.Jart+, the DECIEM family of brands, including The Ordinary and NIOD, and BALMAIN Beauty. Description * The primary purpose of the Planner/Purchaser role is to manage and optimize the purchasing and planning functions within the R&D organization, ensuring that all activities support the effective execution of research and development projects. * This role involves performing weekly and monthly demand analyses (DAV) for Canada and Research Park, facilitating future planning every 3-4 weeks to align with project needs. The Planner/Purchaser will review high-cost batches and collaborate with chemists to prioritize production, ensuring timely availability of necessary materials to avoid delays. * The position requires regular review of vendor purchase orders and pending materials to ensure alignment with current demands, including the ability to cancel unnecessary orders and optimize inventory levels. The Planner/Purchaser will conduct monthly open batch reports, working closely with formulators to assess batch necessity and manage stock effectively. * Daily responsibilities include material item and batch planning, where the Planner/Purchaser will allocate stock to meet demand, place new orders, and ensure quality lots are received. They will also review highly used raw materials and reallocate scheduled batches to prevent waste and support operational efficiency. * Additionally, the Planner/Purchaser will assist in training team members on relevant systems and collaborate with various teams and brands to ensure that procurement needs are met. This role also encompasses conducting R&D material reviews to optimize stock utilization, working with the warehouse to facilitate shipping and enhance overall efficiency within the R&D operations. Furthermore, the Planner/Purchaser will provide support to the Manager of R&D Purchasing and Planning, contributing insights and data analysis to inform strategic decisions and improve processes, thus helping to achieve departmental objectives and fostering a collaborative environment. 30% Perform Demand Analysis and Future Planning: Conduct weekly demand analyses (DAV) for Canada and Research Park, along with monthly Mass DAV assessments. Engage in future planning every 3-4 weeks to ensure alignment with project needs and resource availability. 30% Batch Review and Coordination: Review high-cost batches exceeding $10K and collaborate with chemists to ensure their timely production. Assess short material shelf life and work with chemists to prioritize production of firm batches to avoid the need for replacement lots. 20% Cross-Department Collaboration, Training Support, and Managerial Assistance: Assist in training team members on relevant systems (such as RDS) to enhance operational efficiency. Collaborate with various teams and brands to meet procurement demands, while also providing support to the Manager of R&D Purchasing and Planning. This includes contributing insights and data analysis to inform strategic decisions, aiding in process improvements, and ensuring alignment with departmental objectives. Conduct R&D material reviews, ensuring that available stock is optimized across manufacturing plants. 10% Material Planning and Allocation: Execute daily material item and batch planning at both Canada and Research Park by allocating current stock to meet demand and placing new orders with plants and/or vendors. Ensure acceptance of quality lots and manage material reallocation as per chemist requests. 10% Vendor Order Management: Periodically review vendor purchase orders to confirm that materials are still necessary. This includes evaluating pending orders and canceling those that are no longer needed based on current demand, ensuring optimal inventory management. Qualifications * Minimum Education level: College/University degree or equivalent experience * 10% Travel Time Experience in Material Planning and Management - Proven ability to perform weekly and monthly demand analysis (DAV) for Canada and Research Park, ensuring accurate future planning every 3-4 weeks. This includes reviewing high-cost batches and collaborating effectively with chemists to prioritize production, ensuring timely availability of necessary materials and minimizing delays. Expertise in Vendor Order Management - Demonstrates experience in reviewing and managing vendor purchase orders, including periodic assessments of pending orders to optimize inventory levels. The ability to effectively cancel unnecessary orders based on current demand is essential, while maintaining strong relationships with suppliers to ensure timely delivery of materials and services. Strong Analytical Skills for Batch and Material Allocation - Proficient in conducting monthly open batch reports and collaborating with formulators to assess the necessity of batches. This role requires expertise in reallocating materials based on shelf life and demand, ensuring efficient use of resources and minimizing waste. Daily material planning skills are crucial for allocating stock effectively and placing orders as needed. Effective Communication and Team Collaboration - Strong communication skills are necessary for engaging with cross-functional teams and brands to meet procurement needs. The candidate has experience training team members in relevant systems, such as RDS, to enhance operational efficiency. Collaboration with various departments is vital for ensuring that all demands and requirements are met from a procurement standpoint. R&D Material Review and Optimization - Experience in conducting R&D material reviews is essential, including assessing available R&D stock with little to no demand and collaborating with the warehouse to facilitate shipping, in conjunction with planners' approval, is critical for ensuring the efficient operation of R&D activities every six months. Support for Management and Strategic Initiatives - should possess a strong ability to support management in strategic initiatives and operational improvements. This includes taking the lead on specific projects that align with organizational goals, providing insightful data analysis, and offering recommendations based on findings. The planner/purchaser will play a crucial role in enhancing team performance and driving efficiency, assisting you in achieving departmental objectives and fostering a collaborative work environment. Their proactive approach will contribute to a culture of continuous improvement, ensuring that procurement processes align with the overall strategic vision of the organization. Pay Range: Anticipated Base Salary Range $66,300.00 to $93,250.00 (Depending on qualifications, skills, experience and/or budget), based on a 40 hour work week (range to be scaled accordingly). In addition, The Estée Lauder Companies offers a variety of benefits to eligible employees, including health insurance coverage (medical, dental, and vision insurance), wellness and family support programs, life and disability insurance, retirement savings plans, education-related programs, paid holidays and vacation time. In addition, the Company maintains highly competitive incentive compensation programs (role eligibility may vary based on terms of the respective plan(s)). You may be eligible to participate in the applicable Commission/Bonus Plan, under the plan guidelines in effect at the time of hire. Additional details regarding the commission plan will be provided as part of your onboarding. Equal Opportunity Employer We are an equal-opportunity employer. Minorities, women, veterans, and individuals with disabilities are encouraged to apply. Accommodations for job applicants with disabilities are available on request. Artificial Intelligence is used to compare and screen an applicant's resume as against the posted job description. Equal Opportunity Employer It is Company's policy not to discriminate against any employee or applicant for employment on the basis of race, color, creed, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender identity or gender expression (including transgender status), sexual orientation, marital status, military service and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information, or any other characteristic protected by applicable federal, state, or local laws and ordinances. The Company will endeavor to provide a reasonable accommodation consistent with the law to otherwise qualified employees and prospective employees with a disability and to employees and prospective employees with needs related to their religious observance or practices. Should you wish to apply for this position or any other position with the Company and you believe you require assistance to complete an application or participate in an interview, please contact .

They are responsible for working closely with senior management (including VP-Value Chain Engineering, VP- Manufacturing Excellence, VP- Value Chain Transformation and IT leaders) to define the multi-year roadmap of modernizing and transforming ELC operations utilizing smart digital technologies tha

Minimum of 4 years of experience in production planning, supply chain management, or inventory control in a manufacturing environment. Mini-Circuits reserves the right to hire outside of these guidelines at Management's discretion. Mini-Circuits is an Equal Opportunity Employer and does not discrimi

Job DescriptionCompany Summary: Since 1964, we have been the world’s largest supplier of fudge making equipment, ingredients, and marketing expertise. Our products are made fresh in retail stores and sold under the retailer’s own name, making us the best-kept secret in retail confectionary. With a strong global presence and a vast network of retail partners, we are committed to delivering exceptional products, service, and long-term business growth. Our culture embodies the 'Hungry, Humble, Smart' philosophy. We value accountability, integrity, collaboration, and a positive, vibrant work environment. Job Summary: The Mix & Nut Production Supervisor is fully responsible for daily execution, material accuracy, labor efficiency, food safety compliance, and team performance across Mix Production and Nut Mix operations. This role owns output, accuracy, and discipline for both dry mix and nut mix production. The Supervisor ensures production meets schedule, quality, safety, and cost targets every day. This is a floor-based leadership role requiring constant presence, decision-making, and accountability. Performance is measured by results, not effort. Responsibilities: Leadership & Team Development • Lead, coach, and hold Mix and Nut Production Leads and Operators accountable., • Conduct regular 1:1s and team meetings to set expectations for safety, quality, and performance., • Enforce attendance, conduct, and performance standards., • Train employees across all mix and nut production positions and ensure cross-training coverage., • Address performance issues immediately to maintain a disciplined, high-performing team. Daily Production Execution • Lead daily startup and operation of mix and nut production lines., • Ensure production orders are reviewed, released, and completed accurately., • Monitor throughout, labor utilization, and efficiency; intervene when deviations occur., • Maintain clean, organized, GMP-compliant work areas., • Oversee nut mix operations, ensuring allergen and cross-contact controls are strictly followed. Material Planning & Accuracy • Plan daily raw material requirements and execute pick tickets., • Enforce FIFO and lot control 100% of the time., • Stage ingredients accurately and reconcile inventory at day’s end., • Ensure ERP consumption and output are entered accurately. Food Safety & Compliance • Enforce GMP, HACCP, SQF, and allergen control standards., • Verify metal detector, weight, and pallet checks., • Maintain lot and case code accuracy., • Ensure audit-ready conditions at all times. KPI Management & Continuous Improvement • Track daily KPIs: production output, labor efficiency, inventory accuracy, ERP accuracy, FIFO compliance, and audit scores., • Identify inefficiencies, waste, and bottlenecks., • Partner with Maintenance on equipment reliability., • Support trials, new products, and process improvements to increase throughput and reduce errors. Qualifications Required: • High School Diploma or equivalent, • 3–5 years food manufacturing experience, • 2+ years lead or supervisory experience, • ERP manufacturing system experience, • Knowledge of GMP and HACCP standards Preferred: • SQF experience or certification, • Forklift certification Core Skills: • Strong leadership, coaching, and team-building skills, • Hands-on operational problem-solving, • Ability to manage multiple priorities under tight deadlines, • Excellent communication and follow-through Benefits Include: • Paid Time Off Plan and Paid Holidays, • Medical, Dental & Vision Insurance, • Company Paid Long Term Disability Insurance, • Flexible Spending Accounts (FSA), • 401(k) Plan, • Life/AD&D Insurance, • Employee Assistance Program, • Length of Service Awards What Makes Calico Different: • Ice Cream Fridays during fair weather months, • On-Site Gym with free fitness classes and personal training, • Flu Shot Clinic held annually on-site, • Birthday & Holiday Celebrations held to foster fun and team interaction, • Employee Appreciation Events with great food, fun and team building for all team members and their families, • Charity Drives held throughout the year to give all Calico team members an opportunity to support our local community, • Employee Referral Program financially rewards employees for referring qualified new hires to Calico Job Type: Full Time Schedule: Monday - Friday 7:00 AM - 6:00 PM Work Location: Amityville, NY Salary Range: $60,000 - $62,000 Annually

Job Description Parabit Systems is a full-service engineering, design, integration, and manufacturing company located in the heart of Long Island, just 30 minutes from New York City. Our reach is nationwide, with satellite offices in Miami, Los Angeles, San Francisco, and Chicago. From total security solutions, to self-service kiosks and digital signage, Parabit's mission is to enhance and protect your business. Parabit Systems, Inc. is currently seeking a CNC operator to join our New York Team. This will be a great opportunity to have a direct impact on the day-to-day operation of a leading systems integrator and service provider. Duties: • Extensive knowledge, minimum 3 years experience or certification in G/M Code Operator Level for 3 axis Mill, • Knowledge of AutoCAD 2007+ for DXF to G Code processing/programming, • Experience with Haas 3 axis Mills a plus, • Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T)., • Plan stock inventory by checking stock to determine amount available; anticipating needed stock; placing and expediting orders for stock; verifying receipt of stock., • Program mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs., • Sets-up mills and lathes by installing and adjusting three- and four-jaw chucks, tools, attachments, collets, bushings, cams, gears, stops, and stock pushers; indicating vices; trimming heads., • Load feed mechanism by lifting stock into position., • Verify settings by measuring positions, first-run part, and sample work pieces; adhering to international standards., • Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes., • Maintain safe operations by adhering to safety procedures and regulations., • Maintain equipment by completing preventive maintenance requirements; following manufacturer's instructions; troubleshooting malfunctions; calling for repairs., • Maintain continuity among work shifts by documenting and communicating actions, irregularities, and continuing needs., • Document actions by completing production and quality logs., • Update job knowledge by participating in educational opportunities; reading technical publications., • Accomplish organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Skills/Qualifications: Conceptual Skills, Process Improvement, Verbal Communication, Functional and Technical Skills, Controls and Instrumentation, Supply Management, Tooling, Coordination, Inventory Control, Attention to Detail, Judgment We offer competitive pay and benefits. The successful candidate will have several years of manual and/or computerized equipment operation experience. All employment candidates must pass a NON-DOT Drug screening and background check prior to employment. Please submit your resume via fax 516-378-4843 or email: Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO

Analyze inventory levels, safety stock, and lead times to maintain optimal inventory while minimizing excess and avoiding shortages. Minimum of 4 years of experience in production planning, supply chain management, or inventory control in a manufacturing environment. Mini-Circuits reserves the right

The Supply Chain Planner (SCP) is the focal point for all supply chain activities. The Supply Chain Planner optimizes how supply chain management interfaces with manufacturing systems. The Principle SCP will lead, develop, and implement supply chain strategies for the program / product line.

Job Description Assembler 1st Shift Westbury, NY Essential Functions: Follows assigned manufacturing procedures to perform product assembly Reports non-conformances in products to Management Ensures the assigned bench is clean and organized May perform other tasks as required by the Company Qualifications: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Must be dependable and responsible. Good Attendance is a MUST. Good hand dexterity and eye-hand coordination. Mechanical abilities are a strong plus for this position. Attention to details The Company will provide necessary training and certifications as required for the position upon hire. Work Environment This job takes place in a Manufacturing environment. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Must be able to lift up to 50 pounds. Minimum weight of products is 5 pounds. Position Type/Expected Hours of Work Some flexibility in hours is allowed, but the employee must be available during the core work hours of 7:00 AM. To 3:30 PM and must work 40 hours each week to maintain full-time status. Occasional evening and weekend work may be required as job duties demand. Required Education and Experience: H.S. Diploma or GED. Prior experience as a mechanical assembler is a strong plus or other job that requires mechanical abilities. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Job DescriptionPosition Description: Help the manufacturing team assemble Genadyne UNO pumps as per customer orders Primary Objective: To assemble pumps and provide cross-functional support to warehouse, CSR and quality department to fulfill orders. Major Areas of Responsibility: • Assemble pumps, • Conduct quality inspection on assembled pumps, • Verify receiving items for pump assemblies, • Create records of pumps that are built, • Maintain appropriate pump parts and accessory storage and handling activities, • Coordinate with NPWT manager on incoming ordersRework, Repair/Service pumps as required Specific responsibilities (tasks): 1. create and manage pumps, PCBs, part numbers, 2. Perform quality test on pumps, 3. create and manage documentation of pumps assembled, reworked, repaired and serviced, 4. Able to provide technical support to the customers/manager or R&D team as required Requirements Education: High School Graduate Abilities: • Ability to work independently, exhibit strong initiative, • Quick Learner, • Able to read and write in English, • Strong interpersonal skills – able to interact with all levels of management as well as customers if required NqTEIZH512

Job Description Ability to read, write, comprehend, follow verbal and written instructions, and possess basic mathematical skills • Ability to do basic arithmetic and understand weights and measurements., • Check equipment for proper sanitation., • Complete checklist and reports., • Add the ingredients to the scheduled kettle., • Wash kettles between kettle rotations as needed., • Check all equipment (flexicon, scales) for proper operation., • Formulate batches to meet the procedure specifications., • Pre-weigh the ingredients according to schedule., • Inspect raw materials before using for quality and sanitary specifications., • Record batch information on the provided forms (lot codes, quality, time, initials)., • Keep all ingredients covered, sealed and identified., • Prepare workstation for operation and maintain a clean and organized work area., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations, • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements., • Lifting up to 50 pounds., • Performing duties while wearing personal protective equipment., • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present. Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Job Description BCforward is currently seeking a highly motivated Warehouse Associate / Production Associate for an opportunity at Hicksville, NY 11801! Position Title: Warehouse Associate / Production Associate Location: Hicksville, NY 11801 Anticipated Start Date: ASAP Please note this is the target date and it is subject to change. BCforward will send official notice ahead of a confirmed start date. Expected Duration: 2+ Months with the possibility of extension Job Type: Onsite Pay Range: $18.00/hr.- $19.00/hr. Please note that actual compensation may vary within this range due to factors such as location, experience, and job responsibilities, and does not encompass additional non-standard compensation (e.g., benefits, paid time off, per diem, etc.). Job Description: Summary / Objective Production Associate is responsible for taking direction from the supervisor in order to meet production demands while ensuring quality and safety standards are met. Percentage of Job/ Essential Job Functions • • Self-Reliant and able to accurately work under limited supervision • Attending area of transfer from filler to chiller., • Inform Supervisors and or Lead of any discrepancy on product information., • Transferring carts of production in and out of chillers and placing them orderly at the WIP area., • Orient product alignment in the Garvey table area, • Flip trays in chillers when needed., • Reworking product that is below specifications., • Keeping work area clean and organized, following the 5 S program., • Promoting a safe work environment at all times., • Follow HACCP principles and Good Manufacturing Practices. Comply with Food and Personal Safety Procedures, company Policies and regulations., • Other duties, as assigned including transferring to Kitchen area as needed., • Perform other duties as assigned Competencies (skills, knowledge and abilities) • 18 years or older • Ability to read, write, comprehend, follow verbal and written instructions and possess basic mathematical skills Minimum General Requirements • Frequent movement including walking, standing, bending/stooping, turning, twisting, pushing, pulling, raising arms, lifting, climbing and other active movements • Able to lift up to 50 lbs, • Performing duties while wearing personal protective equipment, • Able to work in noisy environments, • Working across temperature zones that may include cold and/or hot environments for extended periods and may include work in environments where dust is present Preferred Education and Experience • High School diploma or GED-equivalent, • Bilingual - Spanish Travel Required • N/A Other Duties • As assigned Company DescriptionAbout BCforward: Founded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally. BCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work. BCforward is an equal opportunity employer.About BCforward:\r\n\r\nFounded in 1998 on the idea that industry leaders needed a professional service, and workforce management expert, to fuel the development and execution of core business and technology strategies, BCforward is a Black-owned firm providing unique solutions supporting value capture and digital product delivery needs for organizations around the world. Headquartered in Indianapolis, IN with an Offshore Development Center in Hyderabad, India, BCforward’s 6,000 consultants support more than 225 clients globally.\r\n\r\nBCforward champions the power of human potential to help companies transform, accelerate, and scale. Guided by our core values of People-Centric, Optimism, Excellence, Diversity, and Accountability, our professionals have helped our clients achieve their strategic goals for more than 25 years. Our strong culture and clear values have enabled BCforward to become a market leader and best in class places to work.\r\n\r\nBCforward is an equal opportunity employer.

Under the direction of the Maintenance Supervisor/Manufacturing Management, the Set Up Trainee Associate is responsible for setup, breakdown cleaning and preventive maintenance on the Encapsulation/Tablet machine and all ancillary equipment.

Job Description Position Overview The CAD Technician / Cost Estimator is responsible for supporting both the technical design interpretation and cost development process for manufactured parts and assemblies. This role reviews customer RFQs, drawings, and specifications, creates or refines CAD drawings as needed, and develops accurate, competitive, and profitable cost estimates. The position works cross-functionally with Engineering, Production, and Sales to ensure designs are manufacturable and quotes align with company capabilities and margin targets. Key Responsibilities • Review customer RFQs, drawings, and specifications, • Create, modify, and maintain CAD drawings using AutoCAD, • Interpret designs and generate layouts, • Extract dimensions and support calculations, • Utilize iGems for nesting and machine time, • Use AS400 for cost and routing data, • Develop full cost estimates, • Recommend manufacturing methods, • Prepare quotations and lead times, • Collaborate cross-functionally, • Maintain standards and analyze variances Qualifications • Degree or certification in Engineering, Drafting, or Manufacturing, • Manufacturing or job shop experience, • Proficiency in AutoCAD, • Experience with AS400 and iGems preferred, • Strong understanding of manufacturing processes Core Skills • GD&T and drawing interpretation, • CAD drafting skills, • Analytical and cost modeling ability, • Attention to detail, • Communication and teamwork, • Time management Summary This hybrid role bridges design and cost analysis, ensuring accurate CAD outputs and competitive manufacturing estimates. Job Type: Full-time Work Location: In person

Job Description Parabit Systems is a full-service engineering, design, integration, and manufacturing company located in the heart of Long Island, just 30 minutes from New York City. Our reach is nationwide, with satellite offices in Miami, Los Angeles, San Francisco, and Chicago. From total security solutions, to self-service kiosks and digital signage, Parabit's mission is to enhance and protect your business. Job Summary: Parabit is seeking a motivated, innovative, problem solver with a comprehensive understanding of all facets of Paint and Finishing Work. Candidates must have a minimum of three (3) years of automotive painting or millwork finishing experience. The applicant must be proficient in fabricating top quality finished products. Applicants must be able to read and review shop drawings. A strong work ethic and personal commitment to quality and service are essential for this position. The position will have direct oversight of the shop environment including employee supervision, production schedules and accountability. Adhering to deadlines and time management skills are essential. We are looking for a leader with excellent communication skills that is highly organized, reliable, trustworthily, and efficacy driven. Requirements: • 3 years' experience in paint/powder coating applications or millwork finishing, • Ability to read and review fabrication drawings and specifications, • Capacity to finish custom products in an efficient manner, • The talent to train employees for job related tasks, • Consistently match colors and finishes within high specifications, • Manufacture high quality products, • Very knowledgeable with sanding, preparation, finishing, application, polishing and repair techniques, • Well educated with paint booth equipment and operations, • Exceptionally knowledgeable in various paint finishes such as lacquers, enamels, urethanes, varnishes, dyes, and powder coating systems, • Knowledgeable in silk screen and vinyl graphic applications, • Must adhere to established procedures/processes/policies, • Self-Motivated, with a strong work ethic, • Able to work as a team and motivate employees Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job DescriptionDescription: Director of Quality Cox & Company, Inc. is seeking an outgoing and experienced Director of Quality to lead the development and implementation of our quality management system. This key senior role is vital in ensuring that our products and services consistently meet company standards, regulatory requirements, and customer expectations. The successful candidate will oversee quality teams and collaborate across departments to establish and maintain a culture of quality and compliance throughout the organization. Key Responsibilities • Develop, implement, and maintain the company’s quality management system in accordance with industry standards and regulatory requirements., • Lead and oversee quality assurance teams, providing guidance, training, and performance evaluations., • Collaborate with cross-functional departments such as production, engineering, and customer service to ensure quality and compliance are integrated into all processes., • Conduct audits, inspections, and reviews to identify areas for improvement and ensure adherence to quality standards., • Analyze quality data and metrics to identify trends, root causes, and implement corrective and preventive actions., • Stay current with industry regulations and standards, ensuring the company’s quality practices remain compliant., • Foster a culture of continuous improvement and quality awareness across the organization. Skills and Qualifications • Strong knowledge of quality standards and regulatory requirements relevant to the industry., • Excellent leadership, communication, and interpersonal skills., • Ability to analyze data, identify issues, and implement effective solutions., • Experience with quality management systems, audits, and process improvement methodologies., • Strong organizational skills and attention to detail. At Cox & Company, Inc., we value innovation, integrity, and teamwork. We offer a dynamic work environment with opportunities for professional growth and development. Join us in our commitment to delivering high-quality products and services that meet the highest standards of excellence. Requirements: Role and Responsibilities • Direct a staff of up to 25 people including engineers, technicians, inspectors, engineers and administrative personnel. Hire staff and provide training., • Develop and enforce quality systems to ensure compliance to consensus standards and customer requirements., • Monitor and communicate measurement of quality-related metrics to senior staff and advocate for improvements., • Communicate with customers regarding Quality compliance, complaints, audits, etc., • Collaborate with Purchasing on monitoring and improving vendor performance., • Drive continuous improvement initiatives to reduce waste, improve efficiency and drive a quality culture., • Education – Bachelor’s degree in a technical or management related field., • 10 years minimum experience in a direct QA role with progressive advancement into supervisory and managerial roles., • Ability to follow detailed written and verbal instructions in English., • Ability to work with minimal supervision in a high paced development environment., • Ability to direct and manage a department of up to 25 employees., • Knowledge of manufacturing and inspection processes and data systems., • Ability to interact at all levels of the organization, with customers and regulatory bodies in writing, verbally and in person, • Ability to type documents from drafts and markups., • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match

Job Description Office Manager (Bilingual) Location: Merrick, NY Salary: $60,000–$80,000 (DOE) About the Role A busy, fast-paced window manufacturing company in Merrick, NY is seeking an experienced, highly organized Bilingual Office Manager to oversee day-to-day office operations, support production teams, and ensure smooth workflow across the organization. This role requires a quick learner with strong math skills, excellent phone communication, and the ability to take charge, problem-solve, and manage multiple priorities. Spanish fluency is required, and prior manufacturing or production environment experience is strongly preferred. Key Responsibilities Office & Administrative Management • Oversee daily office operations to ensure efficiency and productivity., • Learn and master the company’s proprietary computer system (training provided)., • Manage heavy incoming phone volume; handle customer inquiries, scheduling, and issue resolution., • Maintain organized digital and physical filing systems., • Serve as a primary point of contact for customers, vendors, and internal teams., • Address day-to-day customer issues, complaints, and service requests promptly and professionally., • Communicate with production supervisors to ensure orders, timelines, and specifications are accurate., • Review work orders, measurements, and specifications to ensure accuracy (strong math skills required)., • Track production schedules and notify customers of expected timelines or delays., • Delegate tasks to administrative staff or supporting team members as needed., • Oversee onboarding and training of new office staff., • Ensure all departments have what they need to meet deadlines and daily goals., • Assist with basic bookkeeping tasks such as invoicing, purchase orders, and payment tracking., • Reconcile order documents, delivery confirmations, and related paperwork., • Maintain office compliance with company policies, safety guidelines, and manufacturing regulations., • Support HR duties including attendance tracking, maintaining employee records, and scheduling. Required Skills & Qualifications • Fluent in Spanish (required)., • Strong math skills for measurements, order checks, invoicing, and production-related review., • Experience handling heavy phone traffic and customer service., • Proven ability to multi-task, delegate, and work under pressure., • Strong problem-solving skills and the ability to take charge in fast-moving situations., • Proficiency with computers; ability to learn new systems quickly., • Prior experience in a manufacturing, construction, or production office strongly preferred., • Excellent organizational, communication, and leadership skills.Company DescriptionThe Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.The Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.

Job DescriptionWe are looking for an experienced Business Analyst Manager to lead the strategic management and optimization of our business systems in a dynamic manufacturing environment. This role requires a strong leader who can collaborate across multiple departments to ensure systems are efficient, reliable, and aligned with organizational goals. Based in Melville, New York, you will play a pivotal role in driving technological advancements and process improvements. Responsibilities: • Define and manage the architecture, configuration, and data flows of the Deltek Costpoint ERP system., • Lead integration projects to connect enterprise systems and ensure seamless functionality., • Analyze and optimize workflows to improve efficiency, quality, and throughput across departments., • Design and maintain automated digital workflows to reduce manual processes and enhance productivity., • Act as the primary liaison between internal teams, external consultants, and software vendors to translate business needs into functional solutions., • Oversee business system implementation projects, ensuring adherence to scope, budget, and timelines., • Develop operational and analytical reports to support data-driven decision-making processes., • Manage and maintain multiple SharePoint sites and libraries to streamline collaboration., • Deliver training sessions for end users and create detailed documentation, including SOPs and security guidelines., • Research and recommend innovative technologies, including AI, to enhance system capabilities.• Bachelor’s degree in business management with at least 9 years of relevant experience, or Master’s degree with 7+ years of experience., • Proven hands-on experience administering ERP systems, specifically Deltek Costpoint., • Proficiency with Microsoft SharePoint for collaboration and document management., • Direct experience with user acceptance testing (UAT) to ensure alignment with business objectives., • Strong background in business analysis and project management within a manufacturing environment., • Familiarity with Microsoft Power Automate and Power BI tools., • Knowledge of Manufacturing Execution Systems (MES) and Product Lifecycle Management (PLM) tools is a plus., • Understanding of AS9100 quality standards and compliance requirements.

Job DescriptionController Farmingdale, NY Our client is a mid-sized, successful and well-established manufacturing company. They are looking to hire a talented Controller to manage the general accounting, cost accounting and reporting for the company. They are looking for someone with prior Controller level experience within a manufacturing company, preferably in the defense, aerospace, electronics manufacturing space. This role requires working fully onsite and offering a salary in the range of $180,000 - $200,000. In addition, they offer a strong benefits package inclusive of health insurance, 401k with match, tuition assistance and a generous PTO program. Responsibilities of the position include: · You will manage day-to-day accounting for the company · Oversee a team of three · Evaluate current processes, offer improvement ideas · Heavy involvement in month-end close, workpapers, etc. · Assist outside auditors with year-end audits Qualifications: · Bachelor's degree in Accounting · 15+ years of accounting experience required, CPA license is a plus · Experience in the aerospace, defense and/or electronics manufacturing field a must · 5+ years of management experience required · Strong systems skills · Top notch organizational skills and the ability to collaborate across the company · Strong communication skills and ability to work well with company executives If you would like to be considered for this opportunity or any other position posted by LHH, please email your resume to Erik.Hansen@ lhh.com or you can visit our web site at . Pay Details: $180,000.00 to $200,000.00 per year Search managed by: Erik Hansen Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job DescriptionDescription: JOB TITLE: Quality Assurance Specialist Job Summary: We are seeking a Quality Assurance Specialist to join our team. The Quality Assurance Specialist is responsible for supporting and maintaining the highest quality standards in all manufacturing processes and products. This role involves overseeing first article inspections, and quality management systems, while acting as the focal point for customer interactions related to quality. The ideal candidate will have experience in aerospace manufacturing, ISO 9001/AS9100 standards, and an eye for detail in product audits and documentation. Key Responsibilities: · Review contracts from Quality Assurance perspective to ensure all quality requirements are met. · Maintain and report the status of the government’s inventory assets. Create and affix customer returned material tags to customer assets upon receipt. · Manage the Quality Management System (QMS) and ensure proper document control. · Schedule and conduct internal audits to maintain compliance with ISO 9001 and AS9100 standards. · Conduct scheduled and random production audits to maintain adherence to quality standards. · Review and analyze customer performance ratings for accuracy and work with customers to adjust customer performance ratings when there is a discrepancy with the customer’s delivery and/or quality data. · Maintain an active supplier quality delivery and quality performance matrix and interface with the supplier if the supplier’s quality performance falls below the QMS documented levels. · Perform the organization’s FSO (Facility Security Officer) requirements and ensure that the organization is meeting or exceeding the standards that are defined by FC-PO-001 Security Manual, FC-PO-002B Classified Material Receiving & FC-PR-003 Security Debriefing. Required Qualifications: · Minimum of 5 years of experience in Quality Assurance, preferably within aerospace or related industries. · Hands-on experience with ISO 9001 and AS9100 standards. · Expertise in First Article Inspection (FAI) documentation and processes. · Proficiency in using inspection equipment such as calipers, micrometers, optical comparators, Micro-Hite, and microscopes. · Ability to read and interpret engineering drawings, with a strong understanding of Geometric Dimensioning & Tolerancing (GD&T). · Strong attention to detail and the ability to work independently in a fast-paced environment. · Excellent verbal and written communication skills. · Proficiency in MS Office (Excel, Word, Outlook). · Must be able to obtain a U.S. government security clearance (clean criminal record required). Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description GENERAL DESCRIPTION: Wilen is driven by industry-leading agency services and cutting-edge direct mail production. We provide strategic direct marketing solutions for national brands, leveraging innovative variable data technology, to turn concepts into finished digital and physical products, all in one seamless process. We’re currently looking for an experienced Account Manager to join our team. The Account Manager is responsible for developing and maintaining strong day-to-day client/agency relationships liaising between clients and internal creative, production and technical teams on conception and execution of marketing projects ensuring on-time and on-budget completion. The seniority and title of Client relationships may vary based on Client account. In this role, the Account Manager will collaborate with senior account management to be involved in client strategic direction as well. Travel is required for this position (15%). RESPONSIBILITIES (including, but not limited to): All lawful directives of your supervisor or a member of Company management. Project Management • Day-to-day Agency lead for assigned accounts, • Maintaining daily updates in internal job tracking tool, • Maintain all scheduled deliverables and ensure campaigns remain on track, • Maintaining internal and external status reports, • Working with Production Dept. to generate estimate requests based on scope of work, • Working with Production Dept. to manage schedule requests and revisions, • Generating SOWs for Client review and approval, • Collaborate with senior account management to be involved in client strategic direction including, but not limited to, testing roadmaps, creative direction, etc., • Partner with clients on data strategy and ensure data transmittal and content is accurate, • Developing creative briefs in collaboration with a senior team member, • Scheduling and participating in internal creative reviews to ensure accuracy of creative concepts to brief, • Acquiring required client assets including artwork, guidelines, etc., • Managing the gathering of all mail data information from client, • Continuously relaying any and all pertinent information to key stake holders, • Involved in the routing and proofing process throughout the project lifecycle, and ensuring the accuracy of changes, • Developing and facilitating content-based changes in project matrix, • Ensuring accurate data entry and billing of job, • Following-up on receipt of postage, data, and mailing of job, • Generate and understanding client reporting needs, • Managing the information gathering and implementation of any client-required reporting, • Developing, maintaining and growing client relationships, • Leading, scheduling and attending client meetings/press trips whether on-site or via teleconference, • Managing client expectations to ensure jobs remain on schedule, • Managing/training an AC and/or AAM in client-specific processes, • Travel is required for this position (15%), • Additional projects and assignments may be assigned based on the needs of the company and/or department QUALIFICATIONS: • Bachelor's Degree or equivalent experience from four-year college or university is preferred., • 3+ in Account Management or Project Management (direct marketing agency experience is a plus)., • Excellent client service competence, presentation and writing skills., • Creative, self-starter, who thrives in a dynamic, fast-paced work environment., • Ability to handle and prioritize multiple tasks and projects., • Track record of working across an organization to get things done., • Ability to learn quickly and think strategically., • Proficient in Excel, Word, PowerPoint This job description is subject to change from time to time at the Company’s discretion. As a direct marketing company, there are times when client deadlines dictate additional work hours. Our employees are expected to be available beyond standard work hours when necessary. We’d love to hear your story and learn how your talents and experiences will enhance our team. You can find out more about us at wilengroup.com. This is a full-time position. We are an equal opportunity employer and a drug-free workplace. E-Verify. For New York, the expected salary range for this position is between $80,000 and $85,000. The actual compensation will be determined based on experience, geographic location, and other factors permitted by law. Wilen offers a variety of benefits to eligible employees, including health insurance coverage (Medical, Dental, Vision), paid holiday, paid time off (PTO), 401(k), and many others. Company DescriptionWilen is driven by industry-leading agency services and cutting-edge direct mail production. We provide strategic direct marketing solutions for national brands, leveraging innovative variable data technology, to turn concepts into finished digital and physical products, all in one seamless process.Wilen is driven by industry-leading agency services and cutting-edge direct mail production. We provide strategic direct marketing solutions for national brands, leveraging innovative variable data technology, to turn concepts into finished digital and physical products, all in one seamless process.

Job Description For more than 80years, Pioneer, a HEICO company, has thrived by serving niche segments of the defense industry by providing distribution and support services. Pioneer high energy culture focuses our Team Members' on providing the highest quality of service. Our leadership approach creates a dynamic environment that continually challenges our Team Members to perform at their best. Pioneer offers competitive compensation, paid vacation and holidays, an excellent 401K plan with company match, and medical, dental, life, and disability insurance. The Business Data Analyst / Account Executive in a combination of a customer services capacity to the company’s most valuable accounts and analysis of micro and macro trends. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Identify and capture orders for Pioneer and the company’s top vendors., • Provide quotes in accordance with Pioneer’s guidelines., • Understand the supplier’s evolving objectives and Pioneer’s role to satisfy them., • Understand and speak to the significance and value of Pioneer’s support functions., • Be an expert in Pioneer’s market segment., • Have a clear understanding of vendor products and applications., • Understand growth market segments and products Pioneer to maintain success., • Anticipate changes in the vendor relationships as well as threats from the industry and competitors., • Travel to tradeshows and vendor sites., • Articulate (verbal and in writing) sales and customer service communications internally and externally., • Work onsite effectively as part of the Pioneer team., • Proven experience in a business development capacity., • Drive and energy to manage multiple accounts while looking for new opportunities., • Excellent written and verbal communication skills., • Strong Excel and data analysis., • Project management., • Creative problem-solving skills., • Strong interpersonal skills., • Ability to handle multiple tasks simultaneously and prioritize.Company DescriptionPioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.Pioneer is a market leader with with nearly 80 years of history and consistent growth. We specialize in providing tailored lifecycle sales and distribution solutions to manufacturing companies serving the military market to support our warfighters around the globe. Pioneer is part of a publicly traded business in the Aerospace & Defense industry with extensive resources.

Job DescriptionDescription: JOB TITLE: Buyer Job Summary: As a buyer, you will play a crucial role in our procurement process by sourcing, negotiation and purchasing materials and goods to meet our company’s operational needs. You will ensure timely deliveries and maintain a strong relationship with our vendors, all while adhering to budgetary guidelines and company standards. Key responsibilities: · Vendor Management: Solicit quotations, place purchase orders, and follow up to expedite deliveries. Ensure vendor performance aligns with contractual agreements and company standards. · Negotiation: Negotiate purchase order terms focusing on quality and cost savings. · Cross-Departmental Collaboration: Work closely with other departments to resolve procurement-related issues and support their needs. · Organization and Efficiency: Maintain organized records and manage your time effectively to meet deadlines and schedules. · Technology Utilization: Utilize Windows and Other systems for procurement activities. Familiarity with MRP systems is a plus. · Continuous Improvement: Participate in meetings, update actions as necessary, and contribute to process improvement initiatives. Required Qualifications: · High School degree required; College degree in Business Administration or related field preferred. · Minimum of 2 years’ experience as a junior buyer, preferably in an Engineering and/or Manufacturing environment. · Strong interpersonal, verbal, and written communication skills. Proficient with Microsoft Excel and Word. Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description Hiring Site Civil Engineers for a top-tier nationally recognized employee-owner engineering firm with a strong very NYC footprint. Known for complex and environmental work across the metro area. Strong reputation with private and public agencies, a healthy project pipeline and are investing heavily in growing their technical teams. Responsibilities: • Prepares the planning, design and permitting documents of renewable energy land development and infrastructure projects in close collaboration with Project, • Personnel using engineering and design software (AutoCAD, Civil 3D, etc.) and equipment;, • Leads tasks associated with the preparation and modification of various engineering documents including reports, specifications, plans, cost estimates and designs for projects., • Writes and/or reviews draft reports, including feasibility studies, stormwater management reports, technical specifications, and utility reports;, • Collaborates with team members on project tasks and assignments Qualifications: • Experienced with Civil engineering, land development, and or stormwater, • Proficient in Software: Civil 3D or AutoCAD, Revit is a PLUS, • Experience with site/civil design, including site planning, grading, stormwater management, drainage, infrastructure, erosion and sediment control • Must have EIT and plans to get PE within a year, • 4+ years of prior relevant professional experience in site/civil design, including site planning, grading, storm water management, drainage, and soil erosion Full benefits package, including medical, vision, dental, 401k match, PTO/holiday, tuition reimbursements and yearly bonuses. Workplace Type This is a hybrid position in Melville,NY. Application Deadline This position is anticipated to close on Apr 13, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionTop Job Located in COPIAGUE, NY Salary: $25.00 Job Functions: • Assist in problem solving with company software., • Preventative Maintenance Management: Schedule and log preventative maintenance tasks, order required fluids and parts, and maintain related spreadsheets. Ensure upkeep of cutting fluids and gear-cutting hob maintenance., • Tooling and Consumables Management: Monitor stock of drills, endmills, and other common tools. Implement and sustain Kanban stocking methods to ensure availability and reduce downtime., • Job Entry and Administrative Support: Create jobs in ERP, prepare travelers, prints, and inspection reports, and issue order acknowledgments using established templates. Maintain organized Excel spreadsheets and support company software problem solving., • Purchase Order and Vendor Tracking: Track delivery status for outsourced components and outside services, coordinating with vendors to ensure timely completion., • Shop Scheduling and Tasking: Assist with basic scheduling by physically moving jobs to designated work centers and helping assign weekend crew tasks to maintain production flow., • Fixture and Process Support: Provide assistance with simple fixture designs and collaborate with engineering on straightforward process improvements., • Material Management: Support inventory accuracy through periodic counts, audits, and reconciliation of materials., • Create and issue Purchase Orders for third party services and consumable goods Knowledge and Skills Required: • Strong computer proficiency, especially in Microsoft Excel, • Ability to read and follow written and verbal instructions with accuracy., • Strong organizational skills with attention to detail in recordkeeping, logs, and inventory management., • Effective communication and interpersonal skills for cross‑department collaboration., • Willingness to learn new systems and proactively solve problems in a dynamic environment. Preferred knowledge and skills but not required • Familiarity with Lean Manufacturing and Six Sigma practices, • Experience with ERP systems like Jobboss and Prophet 21, • Previous experience in a machine shop supervisory role, • Certification in machining or manufacturing technology ##2127OS Express Office: Farmingdale 565 Broadhollow Road Suite 9E Farmingdale, NY 11735

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking a Estimator who will work directly with all department Staff, Supervisors & Managers to setup, reconcile and report on the progress and material/labor costs on all products, jobs and projects. The ideal candidate will have strong organizational, Microsoft Office and CAD drawing review skills, familiar with PC peripherals, basic knowledge of electronics, detail oriented, always willing to ask questions to resolve all concerns and possess an exceptional work ethic. Duties and Tasks: • Identify factors affecting costs, such as product development (NRE's) production time, materials, and labor., • Ability to analyze drawings and other documentation to prepare time, cost, materials, and labor estimates., • Calculate, analyze, and adjust estimates., • Recommend ways to reduce costs without sacrificing quality., • Work with sales teams to review RFP's and new product requests and prepare estimates and bids for clients., • Maintain records of estimated and actual costs., • Provide cost management support and insight for Manufacturing and Product Assembly BOM activities., • Prepare required reports on ongoing jobs/projects, summarizing job/project to-date material and labor costs over/underestimated figures and verify latest BOM costs and report on BOM changes., • Participate in all BOM related support for Design, Engineering, Production and Sales Departments., • Recognize, identify, and correct data errors and process errors, ensure errors are corrected, identified, and reported., • Establish List, Reseller and Distribution channel pricing per predefined markups and discounts., • Work on fixed deadlines, plan work in advance and work efficiently and accurately., • Ownership of the Product Inventory System and content, product/hierarchy numbering, dims, weight, pictures, production drawings and descriptions., • Other duties as deemed essential for the position. Skills/Experience/ Education: • Bachelor's degree or higher., • Reads manufacturing drawings (CAD/CAM) and technical documents to prepare estimates., • Advanced proficiency in Excel., • Familiarity with metal fabrication, • Basic knowledge of electrical components or technical background., • Vendor Management experience, • Experienced with tracking and managing BOM costing revisions., • Experience in Supply Chain Cost Analysis., • Understanding of planning, sourcing, and procurement., • Attention to detail and effective time management skills., • Self-motivated, ability to initiate and follow tasks through to completion and can work independently., • Ability to work in a fast paced, cross functional environment while maintaining composure, focus and a positive attitude., • Proficient and transparent communication skills (verbal, written, listening)., • Good Computer skills (Microsoft Office) 40 WPM typing., • Strong math and excel skills., • Must be able to Multi-task., • Exceptional interpersonal skills., • Strong organizational skills., • Knowledge of Fishbowl is a plus., • Ability to collaborate with cross-functional teams in a rapidly shifting work environment, to deliver value-added results. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to , or fax resume to 516-253-0209. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description About the Role: The Senior Manufacturing Engineer is a hands-on technical leader responsible for designing, implementing, and optimizing manufacturing processes for complex medical device or precision manufacturing environments. This role focuses on process development, automation, cost optimization, and continuous improvement while ensuring quality, safety, and regulatory compliance. The Senior Manufacturing Engineer plays a key role in scaling production, mentoring junior engineers, and driving operational excellence across manufacturing operations. Responsibilities: * Evaluate and optimize manufacturing processes based on efficiency, throughput, quality, and cost metrics. * Design, test, and implement new manufacturing processes for new product introductions and existing production lines. * Lead or support cost estimation activities for new and ongoing manufacturing programs. * Develop and validate automated and manual manufacturing systems. * Design, install, and qualify manufacturing equipment, tooling, and fixtures. * Analyze production requirements, machine capabilities, and capacity planning needs. * Optimize facility layouts, production lines, workflows, and machine utilization. * Identify and resolve production issues, bottlenecks, delays, and quality concerns. * Drive continuous improvement initiatives focused on cost reduction, yield improvement, and quality enhancement. * Train manufacturing staff on new and existing processes and standard work. * Mentor and develop junior manufacturing engineers and technical staff. * Collaborate with cross functional teams including engineering, quality, suppliers, and contractors. * Ensure all manufacturing processes comply with safety, environmental, and regulatory requirements. * Evaluate and implement new technologies to upgrade manufacturing systems and processes. Qualifications: * Bachelors degree in Mechanical Engineering or a related engineering discipline. * Ten or more years of experience as a manufacturing engineer or in a similar role. * Strong knowledge of manufacturing processes, fabrication methods, tooling, and CNC machining. * Experience with manufacturing equipment, automation, and quality assurance techniques. * Proficiency with CAD software and standard engineering tools, including MS Office. * Demonstrated project management, problem solving, and analytical skills. * Strong understanding of health, safety, and environmental regulations in a manufacturing environment. * Ability to work cross functionally and lead technical initiatives independently. Desired Qualifications: * Green Belt certification or formal training in Lean Manufacturing or Six Sigma methodologies. * Hands on experience with continuous improvement programs and operational excellence initiatives. * Experience supporting regulated manufacturing environments such as medical devices or precision equipment. * Strong leadership skills with a proven ability to mentor and develop engineering talent.

Job Description Our client, an established manufacturing firm located in Melville, Long Island NY is looking for an experienced Vice President of Engineering. This role will lead the Engineering team in one of their key spaces. This role requires a leader with deep technical expertise in embedded systems. The ideal candidate will have experience successfully designing and delivering complex microprocessor-based electro-mechanical products and guiding them through regulatory certification and eventually into production. Responsibilities: • Provide strategic direction and hands-on technical leadership for microprocessor-based design, analog circuits and low frequency wireless Engineering disciplines., • Drive architecture decisions for embedded systems / ARM-based processors., • Oversee the design and development of control systems for electro-mechanical assemblies., • Establish Engineering best practices, design standards, and development methodologies., • Lead technical innovation while ensuring reliability, manufacturability, and cost-effectiveness., • Balance strategic leadership with hands-on technical design contribution., • Able to be hands-on and tackle complex design challenges with the team., • Guide products from concept through production., • Build, mentor, and lead a high-performing engineering team., • Foster a culture of technical excellence, innovation, and continuous improvement., • Manage departmental budgets, resources, and project timelines., • Advanced degree (MS or PhD) in Electrical Engineering., • 15+ years of progressive experience in electrical engineering, • 5+ years in Senior Leadership roles., • Extensive hands-on experience with embedded system design and ARM processor architecture., • Proven track record managing hardware development teams., • Experience with IoT devices and connected or battery-powered systems., • Deep understanding of analog and digital circuit design, power electronics, and signal processing., • Knowledge of embedded firmware development in C/C++ for ARM-based micro-controllers a plus., • Proficiency with PCB design tools., • Strong understanding of communication protocols., • Direct experience managing UL certification processes for electrical products., • Proven track record navigating FCC compliance for electronic devices.

Job Description Company Overview: Schivo Medical manufactures a diverse range of essential medical technology solutions. Collaborating with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. *** We provide in-house training in our state-of-the-art facility in Plainview, New York. CNC Operator apprenticeship Position Summary: Learn to complete manual machine tasks and run CNC machines. CNC Operator apprenticeship Essential Duties and Responsibilities: · Ability to interpret a variety of instructions furnished in written, oral, or diagram form. · Loading and unloading of materials into various machines. · General good housekeeping practices within work area. · Review work center for maintenance compliance. · Maintain correct time reporting and accurate entries on applicable manufacturing documentation. · Comply with company quality and safety requirements CNC Operator apprenticeship Necessary Education, Skills, and Competencies (including licensing and certifications): • High School Diploma, GED or higher education, • Trade school certification a plus, • Machine shop experience using various equipment., • Blueprint reading, • Experience using measuring tools., • Must be mechanically inclined., • Ability to pay attention to a single task for long periods of time., • Ability to communicate and understand verbal and written instructions (English) Work Environment: • While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts., • The noise level in the work environment is usually moderate., • Ability to work independently in a fast-paced deadline orientated environment., • Must be able to work in a team environment., • 401(k), • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • Free coffee & tea daily, • Employee reward system Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status

Job Description Schivo Medical in Plainview, New York, is a manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. We are seeking to hire a strong innovative individual to join the engineering Team. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. Manufacturing Engineer Position Summary: A Manufacturing Engineer is responsible for implementing and reviewing the procedures and equipment involved in the manufacturing process. Which includes researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, evaluate, and implement manufacturing processes., • Study production and machine requirements., • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with recent technology., • Strong focus on new product implementation., • Proven experience with repeatable jobs. Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • Bachelor’s degree in mechanical engineering or related field, • 5 years of work experience as a manufacturing engineer or similar role, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g., CAD, MS Office), • Black belt certification a plus, • Continuous improvement, • Project management skills, • Problem-solving ability, • Teamwork skills Benefits: • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Paid holidays, • Employee referral program, • EAP Program, • Life insurance, • Pet inc, • Free coffee & tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job Description Job Title: Material Handler The hours would be 9 am to 5:45 pm Job Purpose: The primary responsibility of this position is to transport assigned operational components, supplies and materials to requesting departments as well as transport full pallets of finished goods to storage and staging areas, loading and unloading trailer for delivery with a power and pallet jacks in a timely manner, observing all safety regulations and ensuring all cGMP and quality standards are met and to maintain the efficient flow of product through the production process. Individual will complete SAP needed transactions to request components for production and perform inventory adjustments. Major Accountability: Possesses required knowledge of SOPs, cGMPs, procedures, SAP entries and has the ability to explain the requirements to others as needed. Independently utilizes required Personal Protective Equipment and Safety Gear and performs a safety check on equipment to be used in the daily operations and ensure that all safety devices are functioning properly. Responsible for the movement of WIP materials within the warehouse. Communicates with Lead Operators and Management to maintain an efficient flow of material through the production process. Checks Compounding and Production schedules for batches to be run, transports materials and supplies to point of use staging area with the appropriate PIT equipment Responsible for the activities associated with the processing of finished goods for outbound deliveries. Keeps assigned areas clear and clean and transports unused components back to storage as required. Performs SAP inventory transactions, as required, to keep WIP inventory and Bin locations accurate. Responsible for overall housekeeping and organization of WIP Warehouse, including cycle counting, reconciliation and material destructions. Cleanliness of pallets/material containers, ensuring cleanliness and good condition of materials delivered to manufacturing. Also, maintain overall housekeeping of Production Staging Areas in Packaging, including cycle counting and reconciliation. At the end of shift, secure all equipment, perform general housekeeping duties and accurately complete all required paperwork. Performs other duties as assigned Adheres to all applicable procedures, cGMPs, company policies and any other quality or regulatory requirements. (For example: OSHA, DEA, FDA, EMEA, ANVISA, HS&E, etc.) Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, this employee would be trained under OSHAs HAZWOPER standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16. All employees that have received the above mentioned training upon hire will receive annual refresher training that covers the OSHA HAZWOPER standard and the requirements of RCRA. Key Performance Indicators: Participate in Behavioural Based Safety Program (BBSP) by complying with all safety procedures and preventive measures (i.e., wearing Personal Protective Equipment (PPE), following lockout/tagout procedures). Ability to work independently and as part of a team in a fast in a fast-paced environment to meet the departments daily productivity and replenishment requirements. Demonstrated ability to manage multiple tasks simultaneously and be able to react to shifting priorities to meet business needs Demonstrated technical skills and knowledge of warehouse processing Strong team player; open to assisting with any task in order to get the work completed Quick learner; able to establish rapport and develop relationships Must be able to identify and recommend improvements. Ability to learn and apply new software multimedia applications Ability to lift up to 50 lbs. Ability to stand for extended periods of time Education/ Experience/ Background: Education: High School diploma or equivalent Languages: Fluent in written and spoken English Experience: 4 years of related experience

Job DescriptionSUMMARY OF POSITION The Assistant Production Supervisor supports daily manufacturing operations within manufacturing and production areas. This role assists in coordinating production activities, ensuring that safety, quality, and productivity standards are consistently met. Working closely with management to monitor workflow, support staff, and ensure machines and processes operate efficiently to meet production schedules. The position plays a key role in maintaining a safe work environment, enforcing company policies, and supporting continuous improvement initiatives. ESSENTIAL FUNCTIONS: Includes, but may not be limited to the following: • Assists the Production Supervisor in coordinating daily production activities to meet production schedules and customer delivery requirements., • Assists with shift start-up activities including machine readiness, tooling verification, material availability, and operator assignment., • Monitors machines and production lines during the shift to ensure output, quality, and safety standards are maintained., • Responds to production interruptions and escalates issues to Maintenance or Production Supervisor to minimize downtime., • Communicates production priorities and shift objectives to operators., • Provides technical and operational support to operators to maintain production efficiency and quality., • Ensures operators follow documented standard operating procedures, work instructions, and safety requirements., • Supports monitoring of Key Performance Indicators (KPIs) including production output, scrap, downtime, and efficiency., • Ensures accurate completion of production documentation and reporting through ERP systems such as PLEX., • Monitors product quality and escalates potential issues to Quality or Production Supervisor as needed., • Supports implementation of engineering changes, production trials, model changes, and pilot builds., • Communicates production issues and support needs to Planning, Engineering, Quality, and Maintenance., • Monitors material flow to ensure workstations remain supplied and production is not interrupted., • Assists in maintaining cleanliness and organization of the production floor in accordance with company standards., • Supports training of operators on equipment, processes, and standard work instructions., • Assists in monitoring employee attendance and reporting concerns to the Production Supervisor., • Assists Production Supervisor with incident, accident, and non-conformity reporting and documentation., • Supports Lean manufacturing initiatives and continuous improvement activities within the production area., • Supports production boards, shift communication, and visual management systems., • Other duties may be assigned. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential function satisfactorily. Reasonable accommodation may be provided to enable a qualified individual with disabilities to perform the essential job functions., • Associate’s degree in business, management or another related field supplemented by 2 (or more) years of experience in a lead role, manufacturing, production, or continuous improvement., • High school diploma supplemented by 5 (or more) years of experience in a lead role, manufacturing, production, or continuous improvement environments.KNOWLEDGE, SKILLS AND ABILITIES:, • Experience in metal stamping, fabrication, assembly, or industrial manufacturing environments preferred., • Experience leading, training, and coordinating production employees., • Ability to assist in supervising shift activities, delegating tasks, and monitoring workforce performance., • Basic knowledge of Lean Manufacturing principles and continuous improvement methods., • Experience with ERP systems such as PLEX, SAP, AS400 or other manufacturing enterprise resource planning systems preferred., • Strong communication and problem-solving skills., • Ability to prioritize tasks and support multiple production activities simultaneously., • Basic mechanical aptitude and understanding of manufacturing processes preferred., • Understanding of and experience with ISO 9001 standards preferred., • Experience enforcing workplace safety procedures and compliance with OSHA or company safety policies., • Ability to promote a strong safety culture on the production floor.PHYSICAL REQUIREMENTS:, • While performing the duties of this Job, the employee is regularly required to stand, sit and walk for extended periods of time. Employees must be able to sit and stand for long periods of time. The employee is occasionally required to stoop, reach overhead, lift and/or move up to 50 pounds. Tasks require manual dexterity, hand, arm, and finger dexterity to operate tools, machinery, computer keyboard and other equipment. In addition to visual and hearing acuity; as well as identifying and distinguishing colors. ENVIRONMENTAL REQUIREMENTS: 4xgT3RsGIt

Job Description ???? Position Description ???? Title: Confectionery Purchasing Assistant ???? FLSA Status: Non-Exempt ???? Reports to: Category Manager, Confectionery ???? Location: Hicksville, NY ???? Primary Purpose Provide detail-oriented administrative and operational support to the Confectionery Category Managers and buying team. This role supports day-to-day purchasing activities by maintaining accurate item data, coordinating with internal departments, and assisting with vendor and reporting needs in a fast-paced, deadline-driven environment. ???? Essential Functions ???? Set up new confectionery items and maintain existing product data in internal systems on a daily and seasonal basis. ???? Partner with Marketing and Art departments to ensure product images, descriptions, pack sizes, and specifications are accurate for web and print materials. ???? Generate reports and maintain Excel spreadsheets to support Category Managers with pricing, assortment, and performance tracking. ???? Process and coordinate customer sample requests. ???? Maintain professional relationships with vendors and brokers to support purchasing and product initiatives. ???? Administer and process vendor chargebacks accurately and in a timely manner. ????️ Perform additional administrative, data entry, and departmental support tasks as assigned. ???? Minimum Requirements ???? Bachelor’s Degree preferred. ???? Intermediate proficiency in Microsoft Excel and overall computer skills required. ???? Prior experience providing administrative support to a buying or sales team within a manufacturing or distribution environment preferred. ???? Highly organized, detail-oriented, and able to manage multiple priorities independently and collaboratively. ????️ Strong written and verbal communication skills; comfortable communicating actionable information to management, internal stakeholders, and vendors. ???? Resourceful, diligent, and adaptable in a fast-paced, deadline-driven environment. ???? What We Offer: Medical / Dental / Vision / AFLAC / Pet Insurance Paid Vacation / PTO / Annual Reviews / Competitive Salary 401(k) Excellent opportunity to join a well-established, thriving, entrepreneurial environment Employee Discounts and more! Nassau Candy is an Equal Opportunity Employer!

Job Description ???? Position Summary We are seeking an experienced and results-driven Director of Operations to lead and optimize manufacturing, printing, and packaging operations across our facility. This role is responsible for overseeing end-to-end production activities—ensuring efficiency, quality, and timely delivery of products while fostering a culture of continuous improvement and safety. The ideal candidate is a strategic thinker and hands-on leader who thrives in a dynamic, short-run, custom manufacturing environment. ????️ Key Responsibilities • Direct and oversee all aspects of operations, including:, • Production, • Printing & art coordination, • Scheduling, • Machinery and equipment, • Process engineering, • Facility maintenance, • Wrapping & packaging, • Shipping and warehousing, • Ensure optimal manufacturing scheduling and material resource planning., • Lead operational initiatives to meet quality, efficiency, cost, and delivery requirements., • Drive process improvements to maximize equipment yield and reduce downtime., • Manage and resolve manufacturing or printing process issues by identifying root causes., • Lead capital projects, new product introductions, and reengineering efforts., • Promote cost-reduction strategies through materials and process optimization., • Maintain adherence to GMP and compliance regulations., • Recruit, train, develop, and manage a high-performing operations team., • Cultivate a culture of continuous improvement and lean manufacturing., • Keep abreast of new technologies and implement innovative manufacturing solutions., • Ensure a safe and compliant workplace through training, inspection, and proactive leadership:, • Conduct Job Safety Analyses, regular safety inspections, and safety meetings, • Investigate all incidents promptly and maintain detailed reports, • Coordinate return-to-work programs and job modifications as needed, • Enforce safety policies, use of PPE, and OSHA compliance measures, • Bachelor's Degree in Manufacturing, Engineering, Business, or related field (MBA a plus), • 15+ years of leadership experience in manufacturing or printing operations, • Experience in short-run, custom, and time-sensitive manufacturing environments, • Strong background in scheduling, MRP systems, and quoting new business opportunities, • Formal training in Lean Manufacturing and/or Six Sigma (preferred), • Proven success in improving operational efficiency and reducing costs, • Strong organizational, analytical, and project management skills, • Entrepreneurial mindset with a hands-on, executive leadership approach, • Excellent verbal and written communication skills

Job Description Product Development Assistant On-Site | Hicksville, NY We’re looking for a high-energy, detail-driven Product Development Assistant to join our growing consumer products team in Hicksville, NY. This is a hands-on, on-site role supporting the development of exciting confectionery, souvenir, and branded consumer products. It’s an excellent opportunity for a recent graduate or early-career professional with exposure to product development, marketing, or business operations who wants to learn how products actually go from idea to shelf. Important note: This is not a software development, data science, or technology role. What You’ll Do As a key supporting member of the Product Development team, you’ll be involved in all pre-production phases, working cross-functionally to help bring new products to market. Core Responsibilities • Support the Product Development team across multiple product lines, including branded and private-label confectionery, • Assist with the development of new products and packaging concepts using market data and trend insights, • Learn and participate in market research, competitive analysis, sourcing, costing, and pricing recommendations, • Manage timelines and priorities to ensure product requests are delivered on schedule, • Coordinate and fulfill product and packaging sample requests for evaluations, customer meetings, and trade shows, • Assist in building product cost breakdowns and Bills of Materials (BOMs), including raw materials, components, labor, and other inputs, • Maintain accurate documentation throughout the development process, • Collaborate closely with Marketing, Creative, Operations, Quality, and other internal teams to ensure products are vetted and approved for launch, • Communicate with domestic and international third-party vendors for product and packaging sourcing Required Qualifications • Bachelor’s degree in Business, Business Administration, Marketing, Finance, or a related field, • Strong organizational skills with exceptional attention to detail, • Ability to manage multiple priorities in a fast-paced environment, • Process-oriented mindset with the ability to follow and improve systems, • Strong problem-solving skills with a creative, solutions-focused approach, • Excellent written and verbal communication skills, • Product Development minor or relevant internship experience, • Hands-on exposure to the full product development lifecycle, • Opportunity to work on tangible, consumer-facing products, • Learn from experienced product, sourcing, and operations professionals, • Join a well-established, growing Long Island company, • Strong foundation role with clear career growth potential

Job Description Superior Motion Controls designs, produces and delivers precision components and assemblies for defense and aerospace systems. We are seeking a highly experienced and hands-on Process and Quality Manager to oversee all aspects of our Quality Program including design and development, precision machining, assembly and test of electromechanical assemblies. This role is responsible for supervising and scheduling internal inspection personnel and interfacing with engineering and production management to ensure all work products (WIP and final components) meet requirements. The Process and Quality Manager will serve as the principal adviser to executive management on elements of the company’s Quality Management System and directly lead the company’s efforts to maintain all required certifications with respect to external standards (ISO9001:2015, AS9100, etc.). Key Responsibilities ▪ Oversee all aspects of the company’s Quality Program and the Inspection Department. ▪ Supervise and schedule the activities of all company quality inspectors ▪ Recruit and train Quality Inspectors to ensure adequate staffing to meet demand ▪ Achieve and maintain proficiency as a Quality Inspector ▪ Ensure all inspection tools and systems are calibrated on schedule as required and maintain appropriate documentation. ▪ Lead the Company through all required external quality audits (Standards based such as ISO 9001, AS9100 as well as any customer required) Requirements Qualifications ▪ Minimum 10 years experience in quality control, with at least 5 years in a leadership or management capacity; preferably in a precision machining/manufacturing environment ▪ Ability to read and interpret complex engineering drawings and GD&T ▪ Strong skills in coaching and developing inspectors with a range of experience levels ▪ Familiarity with lean manufacturing principles, ERP systems, and performance metrics ▪ Effective communicator with strong collaboration skills across departments

Job DescriptionInsurance Job: Commercial Lines Account Executive Insurance Agency Location: Hempstead, NYSalary: $80,000- 100,00 Independent insurance agency is seeking an experienced Commercial Lines Account Executive to grow, service and manage a book of commercial lines accounts. This is a client facing role responsible for new business sales and growth of existing accounts based on clients changing insurance requirements. AE will consult with clients about policy and coverage recommendations and also discus risk management concerns. This position will have an assistant AE to help with administrative and client service related concerns. Responsibilities: • Working knowledge of Property and Casualty insurance, • Experience with a variety of industries, but with a focus on life science, tech, wholesale, manufacturing, and distributors., • Research and compile answers to client policy and coverage questions, • Ability to assist with the marketing/quoting process, • Experience with multiple carrier underwriters, • Identify, compile and manage information regarding account renewalsQualifications, • 7-10 years of insurance industry experience related to servicing commercial accounts, • Property and Casualty license, • CIC, CPCU, or other insurance designations are desirable, • Applied (TAM or EPIC) or AMS360 software experience preferred, • Knowledge of Insurance and/or Brokerage business, • Technical knowledge of product area or industry, • Risk management experience, • Ability to provide consultation and expert advice to management on risk management issues, • Knowledge of computer software packages, including Microsoft Office (Word, Excel, Outlook), • Verbal and written communication skillsAll inquiries will be kept 100% confidential