Manufacturing management jobs in El Paso, TexasCreate job alerts

The Extrusion Supervisor is responsible for the safe, efficient, and accurate operation of the production department to meet daily and scheduled output targets in alignment with plant objectives. Ensures product quality, quantity, and employee performance through effective supervision, communication, and continuous improvement practices. Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between $62,500 - $76,500. Cash compensation is one piece of our competitive total rewards package. What Will You Do? Leadership & Supervision • Supervise all employees within the assigned area, ensuring compliance with company policies, safety standards, and operational procedures., • Lead Tier 1 and Tier 2 meetings, communicating performance updates and shift priorities., • Conduct end-of-shift handoff meetings and maintain accurate written shift reports for seamless communication., • Plan, allocate, and adjust staffing to meet production schedules and workload needs, including overtime coordination., • Conduct interviews, create job requisitions, and partner with HR and Adecco on staffing and onboarding activities., • Provide one-on-one coaching and performance feedback; recognize high performers and address developmental needs., • Monitor training progression, maintain skill matrices, and coordinate cross-training to increase workforce flexibility. Operational Management • Drive adherence to production schedules, product specifications, and standard work instructions. Escalate issues in real-time issues keeping adherence., • Conduct start-up checks, verify tooling and material readiness, and ensure proper line setups., • Monitor labor and production reports to identify inefficiencies and initiate corrective actions., • Collaborate with Manufacturing Engineers and Process Specialists to verify process parameters and optimize performance., • Monitor downtime and scrap trends through Ignition; escalate issues requiring engineering or quality intervention., • Support product qualifications, testing, and new product trials as assigned. Safety, 5S & Compliance • Maintain a safe and organized workplace through daily and monthly 5S audits and compliance checks., • Ensure consistent use of PPE and adherence to Lockout/Tagout and other safety procedures., • Investigate and document all incidents, near misses, and Work Partners cases promptly., • Submit and track maintenance requests; follow up on critical repairs and safety-related work orders., • Participate in safety Gemba walks and verify closure of all corrective actions. Quality & Continuous Improvement • Conduct quality and process audits on technicians and operators., • Review and investigate IDRs (Inspection Discrepancy Reports) and QIRs (Quality Incident Reports) to ensure root causes are identified and corrective actions implemented., • Lead or participate in structured problem-solving using A3 and 5-Why methodologies., • Lead or participate in improvement programs such as RPS (Rapid Problem Solving) and similar initiatives., • Verify adherence to standard work and ensure corrective actions are documented and sustained., • Promote a culture of continuous improvement and complete required leadership and Supervisor Excellence training. Performance Monitoring & Reporting • Maintain accurate Tier board data and performance metrics, including labor, scrap, and downtime., • Track and communicate daily KPIs (OEE, lbs/hr, scrap %, uptime) to management., • Complete timecard reviews, PTO approvals, and Workday HR actions as required., • Attend management meetings and provide requested reports, follow-ups, and weekly summaries., • Ensure accuracy and completeness of production and quality documentation. What Do You Need? Education • High school diploma or equivalent required., • Post-secondary or technical education preferred. Experience • Minimum of four (4) years in a manufacturing lead or supervisory role required., • Hands-on experience with production machinery operation and troubleshooting required., • Experience in plastics extrusion or molding environments is strongly preferred. Skills & Competencies • Strong leadership, communication, and problem-solving skills., • Proficient in Microsoft Office; intermediate level preferred., • Data-driven with the ability to interpret KPIs and identify trends., • Skilled in training, coaching, and performance management., • Ability to read and interpret work instructions, understand process cause-and-effect, and maintain composure under pressure. Other Job-Related Components: Work Environment • Primarily in a manufacturing setting without climate control; subject to outdoor temperature variations., • Average noise level is approximately 85 decibels; PPE including hearing protection required., • Must lift up to 50 lbs. unassisted using proper body mechanics., • Occasional travel (up to 10%) for training, meetings, or support at other facilities. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Who are we? The Toro Company is a homegrown, Minnesota-based company that has been in business since 1914. We pride ourselves on providing world-class equipment to help maintain the environment that we love, while putting an emphasis on giving back to the communities that surround us. From residential lawns and gardens to venues such as St. Andrews Links and Target Field, we are a company with a global footprint and a passion for helping people beautify whatever landscape they may be in. With 100 years of operation under our belt and an average employee tenure of 15 years. Come find out what makes The Toro Company the best place to build a career in El Paso, TX. What are the most common activities? In order to grow and build a successful career at The Toro Company, you will be responsible for: • Perform effective setup, changes, and adjustments to peripheral equipment for safe startup, and provide support for prototype runs, qualifications, and production., • Troubleshoot and adjust equipment while the production lines run and repair machinery problems to achieve high-quality, on-spec production. Diagnose minor faults and provide recommendations to the extrusion technician. Resolve and recommend corrective actions to the production supervisor., • Work with process engineering, manufacturing, and other maintenance technicians to ensure efficient operation., • Perform activities with minimal supervision and with optimal results, minimizing the impact on OEE or extrusion metrics., • Ensure proper operation of the machinery and safety systems like guards, emergency stops, switches, etc. are working in perfect condition., • Provide support in the execution and coordination of the extrusion process, working with Production Supervisors, Group Managers, lead technicians, and the Manufacturing, Maintenance, and Process Engineer, by preparing the necessary equipment and materials., • Prepare peripheral equipment for the production lines, as well as perform the changeovers in all equipment., • Comply with all safety policy and regulations., • The full job description will be provided to the final candidate at the point of the offer., • #LI-Onsite What do you need? To be considered for this position, an individual must meet the following minimum requirements: Applicants must be legally authorized to work in the United States. We are unable to sponsor or take over sponsorship of a school/employment visa at this time. • Technical College graduate with a minimum of two-year degree or certificate., • 2-4 years of extrusion experience., • Proficiency in Microsoft Office suite (Word, Excel, etc.) is required., • Maintenance experience: Preventive & Corrective., • Experience with plastics, rubbers, industrial resins. Preferred Requirements: • Knowledge of mechanical or automated equipment., • Conveyor systems., • Lean Standard Work. Other Job-Related Components: • Some travel may be required to field test sites for data acquisition or performance evaluations. Support will be in our Juarez 3 site., • Provide physical and technical support to Operations and other designated engineering departments., • Interface with engineers, other technicians, vendors, designers, drafters etc. and management personnel. What Can We Give You? At The Toro Company, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits - The Toro company offers employees at our El Paso location a variety of perks, including: • Dress for your day - We know you're more productive when you're comfortable, which is why TTC employees are encouraged to take advantage of our casual, corporate environment., • Wellness - TTC offers a variety of mental health and financial health resources to all employees., • Volunteerism - The Toro Company is proud to provide employees with 20 hours of paid time to volunteer in the community., • Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between $20.96 - $26.20. Cash compensation is one piece of our competitive total rewards package. If you need to, you can access your pay early with the One@Work app, formerly the Even app. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Who are we? The Toro Company is a homegrown, Minnesota-based company that has been in business since 1914. We pride ourselves on providing world class equipment to help maintain the environment that we love, while putting an emphasis on giving back to the communities that surround us. From residential lawns and gardens to venues such as St. Andrews Links and Target Field, we are a company with a global footprint and a passion for helping people beautify whatever landscape they may be in. With 100 years of operation under our belt and an average employee tenure of 15 years, come find out what makes The Toro Company the best place to build a career in El Paso, TX. What are the most common activities? In order to grow and build a successful career at The Toro Company, you will be responsible for: • Hands on analysis of plastics extrusion process including machine, material, and human interface through direct observation, statistical analysis., • Uses statistically bound methodologies (DOE, QFD, FMEA) to optimize materials and process development and ensure a stable manufacturing process., • Use Pro E/Creo as a design tool to develop and improve manufacturing machinery, user interfaces and to improve the extrusion process., • Oversee the integration of newly developed processes and equipment into the current manufacturing process, evaluate results and in ensure improvements in manufacturing are maintained. Includes vendor management and implementation of extrusion equipment from specification through installation and process qualification., • Machine design and tooling design improvements., • Guide and supervise technical staff members and manufacturing personnel during the material and / or process development process and ensure work is done correctly and safely. Includes creation of operating procedures, process setups, quality documentation and product specifications., • Oversee, and or conduct, product hydraulic performance testing and material physical properties testing. May include both hands on testing and directing activities of lab test technician., • Provides direct production support, as required, for production processes in El Cajon. Provides remote production support, and periodic direct production support as required to Toro manufacturing sites in Texas, Florida, and global locations., • Performs other required duties as needed in addition to the essential duties and responsibilities described above., • The full job description will be provided to the final candidate at the point of the offer., • #LI-Onsite Job Dimensions: Works with product development, extrusion process development and improvement teams to assess project scope and determine project schedule and budgets. Develop a plan of action that meets time, cost, and quality needs as part of organizing and leading project teams within R&D, and cross functionally (Operations, Process Engineering, Quality, Product Management). Ensures that projects are developed, planned, designed, tested and produced in an efficient and profitable manner. Applies knowledge to analyze processes, recommend changes, and implement improvements that may be either mechanical, human interaction, or both. Interact with, and manage the work assignments of both internal and external resources. Receives work direction from Principal Engineer, Materials - MAG Lab Manager and, if so assigned, receives work direction from Toro product development Principal Engineers. What do you need? To be considered for this position, an individual must meet the following minimum requirements: • Bachelor's degree concluded - Plastics Engineering, Polymer Chemistry or Mechanical Engineering., • 5+ years of experience in a similar position, • Extrusion, plastics and polymer experience., • Communication skills at all levels., • Microsoft Office Preferred Requirements: • Plastics machinery., • Lab testing., • 10+ years in plastics at different industries., • Excellent observational skills and attention to detail. Other Job-Related Components: • (onsite support to other facilities up to 5% of time). What Can We Give You? At The Toro Company, we are always working to make sure our employees know just how valued they are. In addition to a competitive salary, an affordable and top tier medical/dental/vision plan, 401k, and many other great benefits - The Toro company offers employees at our El Paso location a variety of perks, including: • Dress for your day - We know you're more productive when you're comfortable, which is why TTC employees are encouraged to take advantage of our casual, corporate environment., • Wellness - TTC offers a variety of mental health and financial health resources to all employees., • Volunteerism - The Toro Company is proud to provide employees 20 hours of paid time to volunteer in the community., • Competitive Salary – The pay range takes into account skills, experience, education, and location. It is not common to be hired at or near the top of the range; compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the annual pay range is between $101,800 - $127,200. Cash compensation is one piece of our competitive total rewards package. If you need to, you can access your pay early with the One@Work app, formerly the Even app. The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Pay: $21-26/hr depending on experience Hours: 7am-7pm, 12 hour rotating schedule (3 day week and 4 day week rotating) JOB SUMMARY: Maintenance personnel are responsible for the maintenance of all production and some facility equipment in support of manufacturing objectives with a focus on preventative maintenance. Must inspect different equipment and perform any basic repairs or preventive maintenance when required. DUTIES & RESPONSIBILITIES: * Perform upgrades, repairs, and installations throughout the facility. These activities will be driven by our Computer Maintenance Management System (CMMS). This system provides instruction, manuals, records completion, and track the time for these tasks * Maintain continuous plastic extrusion lines running • Troubleshoot and repair mechanical and electrical failures on lines, • Perform scheduled preventative maintenance, • Assist other team members (Technician I) with more technical or advanced troubleshooting, • Flexible Work hours and OT as needed, • Performs functions of a maintenance technician including repairs on: motors, drives, gearboxes, heater circuits, wiring, plumbing, hydraulics, pumps, fabrication of equipment and light machine shop work, • Follows all requirements of Hazardous Energy Control programs, applicable NEC, ANSI, CDRH, NFPA, OSHA, Federal, State and Local regulations. Safety training is provided EDUCATION: * High school diploma or equivalent technical education is required * Associates Degree or equivalent degree preferred * Certifications preferred EXPERIENCE: • 3-7 years experience as a maintenance technician in a manufacturing environment in industrial mechanical and electrical maintenance, • Proven maintenance experience with plastics manufacturing equipment, including injection molding, automated assembly, or extrusion machines., • Electrical skills and ability to read electrical drawings for troubleshooting, • Experience with variable frequency drives (ABB, AllenBrady Power Flex, Emerson), • Familiar with PC based control systems (Command line and PowerShell experience), • Familiar with basic oscilloscope functions, • Experience with centralized loading systems, • Must have own tools, outside of specialty tools that are provided by Toro, • Experience with industrial water systems, chillers, compressors, and water systems, • CMMS experience The Toro Company is an Equal Opportunity Employer. We consider all qualified applicants based on merit and do not discriminate on the basis of race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information, military service, or other non-merit factors. We are committed to creating a welcoming environment for all employees.

Eaton's ES AMER ARS PDCAD division is currently seeking a Sr. Manufacturing Engineer in El Paso, TX. The expected annual salary range for this role is $83250.0 - $122100.0 a year. This position is also eligible for a variable incentive program. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Sr. Manufacturing Engineer will lead for creating manufacturing processes and project management in setting up a greenfield operation. This role will help craft the initial plant layout and own the manufacturing design from day one through ramp up to full capability. In this role you will make process improvements through collection and analysis of manufacturing data to improve safety, product quality, customer delivery, and cost reductions. You will also provide process information for training with production associates and meeting engineering standards. Essential Functions: • You will evaluate and establish manufacturing cost, quality plans and investments in new and redesigned components or procedures, • You will create manufacturing processes, layouts, routings, and drawings, • You will investigate, analyze and recommend alternate equipment and manufacturing methods, • You will procure equipment and tooling per project plans and Eaton standards, • You will provide technical assistance to customers as requested, • You will resolve manufacturing problems using statistical tools and continuous improvement methods, • You will participate in product process design reviews, • You will investigate and initiate cost reduction programs, • You will evaluate and verify processes and tool designs completed by peers, • You will assist suppliers with processes to improve quality and cost, • You will develop and summarize capital appropriation data and narratives for projects, • You will generate machine and production process capacity and capability studies, • You will implement, promote and maintain a safe work environment by implementing a culture of zero accidents including prevention, investigation, equipment maintenance and application of rules. Identify, control and administer risk and danger in own area and manufacturing processes., • You will promote the company's mission and vision by actively supporting Eaton's ethics and values as well as quality policies., • You will motivate and coach employees to maintain high levels of satisfaction, productivity, and quality through effectively utilizing available rewards and recognition channels to encourage and promote desired behaviors and results. Qualifications: Basic Qualifications: • Bachelor's degree in Engineering from an accredited institution, • Minimum of 3 years of manufacturing experience, • Eaton will not consider applicants for employment immigration sponsorship or support for this position. This means that Eaton will not support any CPT, OPT, or STEM OPT plans, F-1 to H-1B, H-1B cap registration, O-1, E-3, TN status, I-485 job portability, etc., • No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of El Paso, TX will be considered. Active-Duty Military Service member candidates are exempt from the geographical area limitation Preferred Qualifications: • 5 years of experience in a manufacturing environment., • Previous experience in electrical industry, • Experience managing projects and/or teams., • Familiarity with Lean tools., • Bilingual English / Spanish. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-836-6345 to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Job Description Work Schedule: Full Time, Monday through Friday 7:00 a.m. - 4:00 pm, 1st shift & 4:00pm a 1:00am, 2nd shift SUMMARY: Productos Real is a food manufacturing facility specializing in wholesale Mexican foods. The Food Manufacturing Industrial Kitchen and Production employee plays a critical role in the production of our food products. We are seeking a dedicated and motivated individual to join our food manufacturing team as an Industrial Kitchen Worker. In this role, you will be responsible for working in a fast-paced, hot, and wet environment to assist in the production of food products. Your primary tasks will involve preparing ingredients, operating industrial kitchen equipment, maintaining cleanliness and hygiene standards, and ensuring the smooth operation of the production line in the kitchen/cook room. ESSENTIAL DUTIES AND RESPONSIBILITES: • Ingredient Preparation: Measure, weigh, and mix ingredients according to established recipes and production guidelines., • Operation of Industrial Equipment: Operate industrial kitchen equipment such as vats, elevators, conveyors, and packaging machines, following safety protocols and standard operating procedures., • Food Production: Contribute to the production line by performing tasks such as braiding, cutting, chopping, and portioning food items into racks., • Quality Control: Monitor the production process to ensure compliance with quality standards, including product temperatures, coction, consistency, and appearance., • Cleanliness and Hygiene: Adhere to strict cleanliness and sanitation standards, including maintaining a clean work area, washing equipment, and following proper hygiene practices., • Safety Compliance: Follow all safety procedures and guidelines to minimize risks in the hot and wet working environment. Use personal protective equipment (PPE) as required., • Inventory Management: Assist in monitoring and restocking ingredient and supplies to ensure continuous production., • Record-Keeping: Maintain accurate production and inventory records, including batch numbers, weights, and quantities produced., • Troubleshooting: Identify and resolve production issues, equipment malfunctions, and quality deviations under the guidance of supervisors., • Collaboration: Work effectively as part of a team, communicating with supervisors, fellow workers, and other departments to ensure smooth production flow., • Support in all areas of the kitchen and additional tasks as needed. REQUIREMENTS/QUALIFICATIONS/SKILLS: • Experience: Prior experience in a food manufacturing or industrial kitchen setting is preferred but not mandatory. On-the-job training will be provided., • Physical Stamina: Ability to stand for extended periods, lift heavy objects, and perform repetitive tasks in a hot and wet environment., • Adaptability: Willingness to work flexible hours, including weekends and evenings, to accommodate production demands., • Attention to Detail: Strong focus on quality control, following recipes and instructions accurately, and maintaining cleanliness standards., • Team Player: Excellent communication skills and the ability to work harmoniously as part of a team in a fast-paced environment., • Food Safety Knowledge: Familiarity with basic food safety practices, including personal hygiene, cross-contamination prevention, and proper storage procedures., • Time Management: Efficiently manage tasks to meet production targets while maintaining quality and safety standards., • Please note that this job description is a general overview and responsibilities may vary depending on the specific requirements of the food manufacturing facility.Company DescriptionT&T Staff Mission Statement: T&T Staff Management, Inc. is a Human Resources Outsourcing firm (or PEO) that is dedicated to providing superior solutions to problems in the areas of Human Resources, Workers' Compensation, Safety, Employee Benefit Administration, and Payroll to increase profitability and productivity for our client companies while simultaneously saving them time, and reducing labor costs and liability. Company History: Established in 1992, we have become the largest most financially sound Professional Employment Organization (PEO) in the Southwest. Our focus at T&T Staff is to assist you with your business whether large or small, to control costs, save time and eliminate time-consuming paperwork. Our professional staff is prepared to help you get in compliance with federal agencies such as OSHA, Wage and Hour, and EEOC which in turn can reduce costly employee turnover. We'll take care of the complex maze of federal, state and local regulations so you don't have to. Our Safety / Risk Management Department is staffed with four Safety Specialist all who are OSHA 500 & 501 authorized trainers and who are all certified CPR/First Aid Instructors as well as one licensed Insurance Adjusters. Better human resource services, accurate payroll service, timely claims investigations, reduced accounting cost and outstanding customer service, that's who we are. As a Character First! Company we strive to maintain the highest ethical standards in business holding to the belief that partnerships established on integrity are long lasting.T&T Staff Mission Statement:\r\n\r\nT&T Staff Management, Inc. is a Human Resources Outsourcing firm (or PEO) that is dedicated to providing superior solutions to problems in the areas of Human Resources, Workers' Compensation, Safety, Employee Benefit Administration, and Payroll to increase profitability and productivity for our client companies while simultaneously saving them time, and reducing labor costs and liability.\r\n\r\nCompany History:\r\n\r\nEstablished in 1992, we have become the largest most financially sound Professional Employment Organization (PEO) in the Southwest. Our focus at T&T Staff is to assist you with your business whether large or small, to control costs, save time and eliminate time-consuming paperwork. Our professional staff is prepared to help you get in compliance with federal agencies such as OSHA, Wage and Hour, and EEOC which in turn can reduce costly employee turnover. We'll take care of the complex maze of federal, state and local regulations so you don't have to. \r\n\r\nOur Safety / Risk Management Department is staffed with four Safety Specialist all who are OSHA 500 & 501 authorized trainers and who are all certified CPR/First Aid Instructors as well as one licensed Insurance Adjusters. Better human resource services, accurate payroll service, timely claims investigations, reduced accounting cost and outstanding customer service, that's who we are.\r\n\r\nAs a Character First! Company we strive to maintain the highest ethical standards in business holding to the belief that partnerships established on integrity are long lasting.

Job Description JOB SUMMARY: Join our innovative team as a Pool Designer/Drafter, where your creativity and technical expertise will bring luxurious and functional pool designs to life! This dynamic role combines artistic vision with precise technical drafting, ensuring each project meets client expectations and industry standards. You will collaborate closely with clients, engineers, and construction teams to develop detailed plans that turn dreams into reality. If you thrive in a fast-paced environment and have a passion for mechanical design and system schematics, this is the perfect opportunity to elevate your career in pool and outdoor living design. ESSENTIAL DUTIES AND RESPONSIBILITES: • Develop comprehensive pool layouts, including structural, mechanical, and aesthetic features, using advanced CAD software., • Create detailed schematics, system designs, and assembly drawings aligned with project specifications and industry standards., • Utilize tools such as Revit, AutoCAD, MicroStation, and NavisWorks to produce accurate 2D and 3D models of pool systems., • Incorporate GD&T (Geometric Dimensioning & Tolerancing) principles to ensure precise manufacturing and construction., • Collaborate with engineers to integrate mechanical knowledge into system design, ensuring compliance with ASME codes & standards., • Prepare technical documentation, including schematics, assembly instructions, and construction drawings for use by contractors and builders., • Support project management by reviewing designs for constructability, performing FEA (Finite Element Analysis), and participating in design reviews., • Proven experience in CAD drafting with proficiency in AutoCAD, Revit, MicroStation, SolidWorks, Creo, Autodesk Inventor or Pro/ENGINEER., • Strong understanding of mechanical engineering principles, system design, and construction processes related to pools or similar structures., • Familiarity with industry standards such as ASME codes & standards for mechanical systems., • Skilled in technical writing, schematic development, 2D animation, and assembly modeling., • Knowledge of FEA tools for structural analysis and system optimization., • Ability to interpret engineering drawings and schematics accurately while adhering to project deadlines., • Excellent communication skills to collaborate effectively across multidisciplinary teams. Join us in shaping extraordinary outdoor environments by combining your drafting expertise with innovative design solutions! We are committed to supporting your professional growth through ongoing training in the latest CAD tools and industry standards—empowering you to create stunning pools that inspire and delight clients worldwide. All roles are paid positions that value your skills and dedication from day one! Company DescriptionT&T Staff Mission Statement: T&T Staff Management, Inc. is a Human Resources Outsourcing firm (or PEO) that is dedicated to providing superior solutions to problems in the areas of Human Resources, Workers' Compensation, Safety, Employee Benefit Administration, and Payroll to increase profitability and productivity for our client companies while simultaneously saving them time, and reducing labor costs and liability. Company History: Established in 1992, we have become the largest most financially sound Professional Employment Organization (PEO) in the Southwest. Our focus at T&T Staff is to assist you with your business whether large or small, to control costs, save time and eliminate time-consuming paperwork. Our professional staff is prepared to help you get in compliance with federal agencies such as OSHA, Wage and Hour, and EEOC which in turn can reduce costly employee turnover. We'll take care of the complex maze of federal, state and local regulations so you don't have to. Our Safety / Risk Management Department is staffed with four Safety Specialist all who are OSHA 500 & 501 authorized trainers and who are all certified CPR/First Aid Instructors as well as one licensed Insurance Adjusters. Better human resource services, accurate payroll service, timely claims investigations, reduced accounting cost and outstanding customer service, that's who we are. As a Character First! Company we strive to maintain the highest ethical standards in business holding to the belief that partnerships established on integrity are long lasting.T&T Staff Mission Statement:\r\n\r\nT&T Staff Management, Inc. is a Human Resources Outsourcing firm (or PEO) that is dedicated to providing superior solutions to problems in the areas of Human Resources, Workers' Compensation, Safety, Employee Benefit Administration, and Payroll to increase profitability and productivity for our client companies while simultaneously saving them time, and reducing labor costs and liability.\r\n\r\nCompany History:\r\n\r\nEstablished in 1992, we have become the largest most financially sound Professional Employment Organization (PEO) in the Southwest. Our focus at T&T Staff is to assist you with your business whether large or small, to control costs, save time and eliminate time-consuming paperwork. Our professional staff is prepared to help you get in compliance with federal agencies such as OSHA, Wage and Hour, and EEOC which in turn can reduce costly employee turnover. We'll take care of the complex maze of federal, state and local regulations so you don't have to. \r\n\r\nOur Safety / Risk Management Department is staffed with four Safety Specialist all who are OSHA 500 & 501 authorized trainers and who are all certified CPR/First Aid Instructors as well as one licensed Insurance Adjusters. Better human resource services, accurate payroll service, timely claims investigations, reduced accounting cost and outstanding customer service, that's who we are.\r\n\r\nAs a Character First! Company we strive to maintain the highest ethical standards in business holding to the belief that partnerships established on integrity are long lasting.

Job Description JOB DESCRIPTION Job Title: Wire Mill Manager Reports to: President Department: Manufacturing FLSA Status: Exempt SUMMARY Directs and coordinates activities concerned with production of company product(s) by performing the following duties personally or through subordinate supervisors. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. § Confers with management personnel to establish production and quality control standards, develop budget and cost controls, and to obtain data regarding types, quantities, specifications, and delivery dates of products ordered. § Plans and directs production activities and establishes production priorities for products in keeping with effective operations and cost factors. § Coordinates production activities with purchasing, maintenance, and quality control activities to obtain optimum production and utilization of human resources, machines, and equipment. § Reviews and analyzes production, quality control, maintenance, and operational reports to determine causes of nonconformity with product specifications and operating or production problems. § Develops and implements operating methods and procedures designed to eliminate operating problems and improve product quality. § Revises production schedules and priorities as result of equipment failure or operating problems. § Compiles, stores, and retrieves production data. SUPERVISORY RESPONSIBILITIES Is responsible for the overall direction, coordination, and evaluation of these units. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Fifth year college or university program certificate; or two to four years related experience and/or training; or equivalent combination of education and experience. Experience running a copper wire mill is a must. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometty and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand and walk. The employee is occasionally required to sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions and extreme heat. The noise level in the work environment is usually moderate.

Job Description Company Description: Plastic Molding Technology (PMT) manufactures high precision plastic parts for automotive, telecommunications, medical device, renewable energy, and industrial customers. The primary manufacturing processes are injection molding and thermoforming. PMT has ~100 injection molding presses at its two primary manufacturing locations in El Paso, TX and Centennial, CO (a suburb of Denver). A third facility in Longmont, CO (a suburb of Denver) provides in-house repair and fabrication of tools & dies. Role Description: The Human Resources Manager role will work under the Head of Human Resources. This position will maintain effective communication and interaction with employees across the entire organization and reports directly to the Head of Human Resources to improve work relationships, build morale, and increase productivity and retention. You will need a strong attention to details and a broad knowledge of human resources functions, from hiring to onboarding and from employee compensation to evaluation. What you’ll do: • Work with the Head of Human Resources on administering the annual Open Enrollment process, • Process payroll for 200 employees, • Work with the Accounting team to ensure that monthly bill reconciliations are submitted in a timely manner, • Assist with the running of monthly and/or quarterly reporting of key employee metrics, • Act as the main point of contact for all Employee questions regarding company policies and procedures, • Assist with an annual review of Company Benefit Offerings and make recommendations on the annual benefits plan options to the Head of HR, • Administer all employee benefit programs including 401(k) plan management and upkeep, Health Benefits, COBRA, ACA compliance, • Assist with the administration of an annual Professional Development Process and assist hiring managers and staff with questions regarding timing, process, and expectations as needed, • Maintain organizational charts, employee policies and procedures, and job descriptions, • Ensure that all benefit elections are accurately reported in the HRIS system, • Stay up to date with changes in all federal, state, and local employment laws and propose required changes to the policy to the HR Director in a timely manner, • Maintain a high level of integrity and confidentiality regarding all Employee information, • Administer all parts of the Employee onboarding and the offboarding process by creating offer letters, adding them to the HRIS system, introducing them to the team, procuring necessary access to the garage/building, and ensuring that they have all materials required to perform their job duties, • Assist in the maintenance of employee records, • 5-10 years of Human Resource experience in a manufacturing environment, • A bachelor’s degree (preferably in HR or Business Administration), • Strong compliance background with the ability to write strong employee policies, • Must be able to speak fluent English and Spanish, • Experience with benefits administration, • Experience with 401k compliance and administration, • Ability to establish and maintain effective working relationships across the organization, particularly with peers, • Experience with Microsoft Office applications, • Ability to work autonomously, • Ability to multi-task and wear many hats, • HR Certification such as PHR or SHRM-CP, • Ability to communicate information efficiently and succinctly, • Experience with ADP, • Ability to work in a manufacturing setting

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Company Description: Plastic Molding Technology (PMT) manufactures high precision plastic parts for automotive, telecommunications, medical device, renewable energy, and industrial customers. The primary manufacturing processes are injection molding and thermoforming. PMT has ~100 injection molding presses at its two primary manufacturing locations in El Paso, TX and Centennial, CO (a suburb of Denver). A third facility in Longmont, CO (a suburb of Denver) provides in-house repair and fabrication of tools & dies. Why Join Us? • Competitive salary and benefits package, • Opportunity to work in a dynamic and innovative manufacturing environment This position is responsible for ensuring proper shipment and receipt of all incoming and outgoing materials for El Paso. What you’ll do: • Supervise, train, and support all warehouse personnel, • Adhere to and enforce proper safety standards, • Arrange pickup of shipments in accordance with customer specifications for delivery, • Receive all incoming material through proper procedure, • Maintain daily outgoing and incoming shipment logs, • Obtain required documentation for each shipment, such as certification from Quality department, CoC, invoicing and any other required documentation, • Maintain accuracy of inventory through strong internal controls, cycle counts and physical inventories for all material classifications, • Maintain adherence to FIFO, • Assist Engineering in the shipment of sample parts, • Contact and coordinate carriers for pickups daily, • Coordinate all logistics for all incoming and outgoing shipments with focus on compliance and cost savings, • Provide accurate reporting to Upper Management, • High School Diploma or GED Equivalent, • 3-5 years of inventory management and logistics experience, • ERP experience required (SAP, IQMS, Syteline, etc.), • Forklift certified, • Speak, read, and write English, • Bilingual in Spanish is a plus, • Ability to follow detailed directions, • Computer and Microsoft (outlook, excel) proficiency, • Effective communication and attention to detail, • While performing the duties of this job, the employee is regularly required to stand; walk; sit; talk or listen, • The employee is frequently required to reach with hands and arms; climb or balance; lift overhead; and stoop, kneel, crouch, or crawl, • This position requires frequent manual dexterity in combination with eye/hand coordination such as keyboarding and assembling small parts, • Repetitive hand motions and prolonged periods of standing required, • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus, • The employee must frequently lift and/or move up to 60 pounds, • The noise level in the work environment is usually low to moderate Plastic Molding Technology does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any resumes submitted to our employees or hiring managers without a formal, signed agreement in place with Human Resources will be considered property of Plastic Molding Technology. We will not be liable for any fees related to unsolicited submissions and will not recognize any claims to candidate ownership. A valid contract must be executed before any candidate submissions are accepted.

Job Description Who We Are Formerra is a preeminent distributor of engineered materials, connecting the world's leading polymer producers with thousands of OEMs and brand owners across healthcare, consumer, industrial, and mobility markets. Powered by technical and commercial expertise, it brings a distinctive combination of portfolio depth, supply chain strength, industry knowledge, service, leading ecommerce capabilities, and ingenuity. The experienced Formerra team helps customers across multiple industries to design, select, process, and develop products in new and better ways – driving improved performance, productivity, reliability, and sustainability. To learn more, visit . Formerra leads in the market with the following key capabilities: • Problem-solving mindset, based on ingenuity and backed by a skilled and experienced commercial team that brings differentiated insights across markets including healthcare, consumer, industrial and mobility, • Expansive material portfolio, including engineering thermoplastics and traditional polymers across leading material brands, • Integrated, long-standing relationships with leading, global suppliers, • Unparalleled and highly specialized technical, processing, and design support, • Regulatory-compliant material support and expertise Position Overview Are you a results-driven sales professional ready to take your career to the next level? Join Formerra Distribution as a Account Manager, where you'll play a pivotal role in accelerating our growth and shaping the future of our customer partnerships. We're looking for someone who thrives in a fast-paced, customer-focused environment and is passionate about delivering value. Prior industry sales experience is a plus, but your drive, professionalism, and ability to build trust will set you apart. Essential Duties and Responsibilities: • Drive profitable revenue growth through new business development and effective account management., • Meet gross margin targets as a percentage of sales., • Execute a professional, customer-centric sales process using tools like scorecards, business reviews, EVE, and CRM., • Build and manage a robust sales funnel; proactively prospect, cold call, and close new accounts., • Set and achieve new business targets aligned with long-term growth goals., • Develop and implement sales plans, budgets, and forecasts; contribute to company-wide planning., • Maintain and grow accounts through strategic engagement and needs-based solutions., • Collaborate with channel partners and internal teams (Marketing, Technical, Customer Service) to meet customer needs., • Provide market feedback and support marketing initiatives., • Represent the company at trade shows and promotional events., • Maintain accurate CRM data and sales metrics., • Act as a business consultant to customers, offering tailored product recommendations and pricing strategies., • Ensure timely reporting and communication with Sales Manager., • Education Requirements:, • Bachelor's Degree in Plastics or Polymer Engineering, Business, Chemistry, or related discipline highly preferred. Highschool diploma and/or GED required., • Experience Requirements:, • 10+ years of sales experience in distribution, manufacturing, sales, account management required., • Strong Technical aptitude, with proficiency in MS Word & Excel preferred; SAP experience preferred., • Professional presence, including excellent verbal and written communication and presentation skills., • Broad knowledge of solutions, materials and processing., • Self-motivated., • Team player., • Strong organizational skills required., • Prolonged computer use: Frequent use of a computer and other digital tools for communication, CRM management, and reporting (up to 8 hours/day)., • Sitting and screen time: Extended periods of sitting and screen exposure during virtual meetings, planning, and administrative tasks., • Lifting: Minimal physical lifting required; may occasionally lift items up to 20 lbs. (e.g., promotional materials or equipment for events)., • Home office setup: Must maintain a dedicated, ergonomically sound home office environment with reliable internet access., • Legal authorization to work in the US is required. We will not sponsor individuals for employment visas, now or in the future, for this job opening., • The above information on this description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job., • It is the policy of Formerra that all employees are employed at the will of Formerra for an indefinite period and are subject to termination at any time, for any reason, with or without cause or notice. At the same time, employees may terminate their employment at any time and for any reason., • Equal Opportunity Employer. All qualified candidates will receive consideration for employment and will not be discriminated against based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, pregnancy, genetic information, creed, citizenship status, marital status or any other consideration prohibited by law or contract.

Job Description Job Title: Cost Management Analyst FSLA Status (Exempt or Non-exempt): Exempt Location (City, State): El Paso, TX Reports To: Director, Cost Management Direct Reports (Yes, No): No Company Overview: Established in Taiwan in 1974, Hon Hai Technology Group, commonly known as Foxconn, is the world’s largest electronics manufacturer and leading provider of technological solutions with a network of over 200 campuses across 24 countries. In the US, Foxconn employs 6,500 across 40 different sites with manufacturing operations in Virginia, Wisconsin, Ohio, Indiana, Texas and California. As of 2023, Foxconn ranks 32nd among the Fortune Global 500 and reported a revenue of approximately USD $213 billion in 2024. The company’s diverse product offerings span four major segments: smart consumer electronics, cloud and networking solutions, computing and various other components. Foxconn makes 40% of the consumer electronics that we find in our everyday lives. In recent years, Hon Hai has adopted the 3+3 strategy, focusing on three emerging industries - electric vehicles, digital health solutions, and robotics - while leveraging three key technologies: next-generation communications, artificial intelligence (AI), and semiconductors. Together these initiatives position the company as a leader for innovation in the 21st century. Hon Hai Technology Group is deeply committed to championing environmental sustainability within its manufacturing processes. By integrating sustainability into its operations framework, the company strives to serve as a best-practice model for global enterprises, enhancing corporate responsibility while meeting the growing demand for environmentally conscious productions methods. Job Summary: This role is responsible for assisting the Director of Cost Management to manage company operation cost effectively, providing accurate cost information via P&L with cost analysis, expenses allocation, and other CM cost information needed by the management and other business groups. Validate budget comparing with actual cost accordingly. Duties and Responsibilities: • Prepares/Provide P&L information with cost analysis needed by management., • Provides various operation Expense Report for management decision making., • Prepares Corp. Service Expense Allocation & publish to various users., • Publishes follow ups to related parties regarding collection of Ars., • Assist CM Director on other need reports for the management., • Assist in preparation of Budget & Actual Cost Analysis and updates., • Reviews and validates PRs whether expenses are legit and budgeted., • Assist in generating PRs., • Maintains files and records ensuring efficiency and productivity., • Proactively supports and provides needed assistance for other business groups., • 3+ years of experience as a cost accountant., • 3+ years of experience in financial accounting and cost controlling, • High Proficiency with SAP, Microsoft Applications utilized in cost management purposes., • Experience with inventory management, logistics management Foxconn is an equal opportunity employer that is committed to diversity and inclusion in the workplace. Foxconn prohibits discrimination and harassment of any kind and provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, gender, religion, sex, sexual orientation, ethnicity or national origin, age, disability, marital status, genetics, pregnancy, or any other protected characteristic as outlined by federal law. In addition to federal law requirements, Foxconn complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation, and training.

Job Description We are seeking a Sourcing Analyst to join our team! You will be responsible for supporting all purchasing department activities including NPI RM sourcing, MRP demand review and annual cost negotiation with suppliers. Duties: • Conducting price analysis regularly to ascertain the best component price and suppliers in terms of best value, delivery on time, • Identifying potential suppliers, visiting existing suppliers, and building and maintaining good relationships with them., • Negotiating and agreeing with contracts and monitoring their progress, checking the quality of service provided;, • Direct, optimize and coordinate full order cycle, • Meet cost, productivity, accuracy and timeliness targets, • Planning and overseeing purchasing, sourcing and NPI buyer team ., • Managed suppliers, conducted negotiations, contracts and payment term review ., • Respond for annual cost improvement and VMP program management., • Coach NPI buyer to search available materiel and fulfill the delivery schedule., • Quarterly review the total usage and provide new EAU to the supplier for cost improvement., • Monitored supplier relationships to ensure strategic alignment and sustainability., • Coaching and developing new team members to enhance negotiation skills, relationship building, effective communications., • Develop training program and schedule for team members to improve the PO and price accuracy., • Identified opportunities for cost reductions in support of annual cost reduction objectives., • Negotiated price with supplier by using different logistic and distribution location., • Ability to work well with other departments as a team., • Must have 3+ year automotive wire harness component sourcing related experience., • Proficiency in Microsoft Office skills (Excel, Word, PowerPoint)., • Must have a minimum of 5 years experience relating to price negotiation., • Bachelor’s Degree (B.S.), • SAP and MRP knowledge RequiredCompany DescriptionBizLink Tech was founded in 1996. Our mission is to become the leading global interconnect solution provider. BizLink has built a fully vertically-integrated business model. We have manufacturing sites in China, Malaysia, Mexico, and the USA for seamless integration into our customers' supply chains. . As a tier-one interconnect solutions company, BizLink has state-of-the-art facilities, advanced manufacturing processes, and professional R&D support.BizLink Tech was founded in 1996. Our mission is to become the leading global interconnect solution provider.\r\n\r\nBizLink has built a fully vertically-integrated business model. We have manufacturing sites in China, Malaysia, Mexico, and the USA for seamless integration into our customers' supply chains. . As a tier-one interconnect solutions company, BizLink has state-of-the-art facilities, advanced manufacturing processes, and professional R&D support.

Job Description- Glazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionDescription: About Us: Unis accelerates logistics success with our Transportation Management System that offers unparalleled control, visibility, and adaptability. Unis strives in elevating our employees and operations toward new heights of excellence. As client’s partner with us, we focus on more than just a business relationship; it's an opportunity to unlock a world of value-added services that will enhance operational standards and elevate success by unifying our clients’ supply chain networks through superior technology, assets, and information services. Job Description Purpose and Scope: Tasked with overseeing and optimizing all operational aspects of the organization to ensure efficiency, productivity, and profitability. Leveraging your extensive experience and leadership skills, you lead a multifaceted team, implement strategic initiatives, and drive continuous improvement across operational processes. Your role is pivotal in aligning operations with the organization's objectives while maintaining a focus on quality, customer satisfaction, and cost-effectiveness. Responsibilities: • Provide strategic direction and leadership to the operations team, ensuring alignment with the organization's goals and objectives., • Oversee the day-to-day operations of multiple departments, including manufacturing, logistics, supply chain, and facilities management., • Analyze existing operational processes and identify opportunities for improvement, streamlining workflows, and enhancing efficiency., • Implement best practices, standard operating procedures (SOPs), and quality control measures to optimize operational performance., • Recruit, develop, and mentor a high-performing operations team, fostering a culture of collaboration, accountability, and continuous learning., • Set clear performance objectives, provide regular feedback, and facilitate training and development programs to enhance team capabilities., • Manage resources effectively, including human capital, equipment, and budget allocations, to maximize productivity and minimize costs., • Develop and monitor operational budgets, ensuring adherence to financial targets and identifying opportunities for cost savings., • Establish and enforce quality standards and compliance regulations across all operational activities, ensuring adherence to industry regulations and company policies., • Conduct regular audits and inspections to monitor compliance and mitigate operational risks., • Collaborate with cross-functional teams, including sales, marketing, finance, and IT, to ensure seamless coordination and alignment of operational activities with business objectives., • Build and maintain strong relationships with suppliers, vendors, and other external partners to optimize supply chain management and procurement processes. Requirements: Required PPE: • Safety Vest, • Safety Glasses, • Strong leadership and interpersonal skills, with the ability to inspire and motivate teams to achieve organizational goals., • Analytical mindset with excellent problem-solving abilities and a focus on data-driven decision-making., • Proficiency in project management methodologies, operational analytics, and continuous improvement frameworks such as Lean Six Sigma. Education/ Training: • Proven strategic planning and budgeting experience, • Demonstrated experience setting, monitoring and meeting quarterly and annual goals., • Experience building and scaling teams and systems, • A minimum of Three (3) years of proven work experience in warehouse, fulfillment or logistics. Managing operational teams and driving process improvements. BENEFITS • Medical insurance, • Dental insurance, • Vision insurance Unis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race (including traits historically or culturally associated with race, such as hair texture and protective hairstyles), religion (including religious dress and religious grooming), color, age (40 and over), genetic information, disability (mental and physical), medical condition (as defined under state law), national origin (including language use restrictions and possession of a driver’s license issued under section 12801.9 of the California Vehicle Code), ancestry, sex (including gender, gender identity, gender expression), sexual orientation, marital status, familial status, parental status, domestic partner status, citizenship status, pregnancy (including perceived pregnancy, childbirth, lactation, or pregnancy-related conditions), military caregiver status, military status, veteran status, or any other status protected by federal, state, or local law. Unis complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Unis expressly prohibits any form of unlawful employee harassment or discrimination based on any of these protected categories. The duties and responsibilities described above are not a comprehensive list and additional tasks may be assigned. The scope of the job may change as necessitated by business demands.

Job Description- Glazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job Description- Glazing Saddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed” - making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 1st Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and am operations of the store. The 1st Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Maintain a clean, neat Glazing Saddles issued uniform at all times., • Company provides uniform of 1-cap, 1-polo shirt, 1-name tag and 1-apron to an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes or boots must be worn at all times. Maintain a clean, neat Glazing Saddles-issued uniform at all times., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Performs other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Assist in Follow up and resolve all Krispy Kreme, Glazing Saddles & Store customer, employee and vendor complaints as soon as possible and according to company standards. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

About Us Driscoll Children’s Hospital has been a leader in pediatric healthcare for South Texas since 1953. As a non-profit, freestanding children’s hospital, Driscoll is dedicated exclusively to the care of infants, children, and adolescents, providing compassionate, comprehensive, and specialized care to more than 45 counties in the region. Clinical Dietitians at Driscoll play a vital role in both inpatient and outpatient settings, supporting a wide range of pediatric patients—including those with nutritional needs related to neonatal care, endocrine and diabetes management, eating disorders, and gastroenterology. Whether working with medically fragile infants or managing long-term outpatient care plans, our dietitians are essential to our mission of improving child health through nutrition and education. As part of the Driscoll Health System, you’ll join a team that values your well-being, professional growth, and future. We are committed to providing a total compensation program to attract, reward, motivate and retain qualified and competent employees. These efforts support our goal of offering the highest level of care, while also helping our employees take care of themselves, their families and their future. What We Offer: • Employee Care Center – Access to high-quality healthcare for employees, spouses, and adult dependents (18+), • Wellness Program – Incentives and resources to support your health and well-being, • Employee Assistance Program – Free, confidential counseling services, • 403(b) Retirement Plan – Employer matching to help you build financial security, • Generous Paid Time Off – Earn up to 24 days annually, • Tuition Reimbursement – Invest in your education and career advancement, • Adoption Assistance – Financial support for growing your family, • On-site Childcare – Convenient care for your little ones while you work, • Professional Development – Access to lectures, courses, skills labs, research opportunities, and more Join a team where your expertise makes a difference—and where every child matters. Learn more about our amazing organization at . Position Details: Title: Clinical Dietitian Location: Specialty Clinic - Brownsville, TX Clinic Hours: Monday-Friday 8am-5pm Schedule: Part time, 2 to 3 days a week Driscoll offers a sign-on bonus and relocation assistance. Experienced dietitians and new graduates are encouraged to apply! Upcoming or recent graduates may interview for our roles prior to completing and passing their Registered Dietitian certification exam. As a Clinical Dietitian at Driscoll Children’s Hospital, you’ll be a key member of our pediatric care team, delivering evidence-based nutrition support to patients and families across inpatient and outpatient settings. You’ll perform comprehensive nutrition assessments, develop individualized care plans, provide education to patients and caregivers, and collaborate closely with physicians and nurses on interdisciplinary care. This role includes monitoring medical nutrition therapy, verifying diet and formula orders, documenting in the EMR, and ensuring accurate billing. Additional Responsibilities Based on Level: • Level I Dietitians focus on developing foundational skills, gaining clinical experience, and contributing to patient care under general supervision, • Level II Dietitians demonstrate a higher level of autonomy, routinely handle complex cases, serve as a resource across the system, contribute to quality initiatives, and may precept interns or junior team members, • Level III Dietitians serve as clinical and professional experts, providing the highest level of authority in nutrition practice. They represent the department when needed, ensure consistency in evidence-based care, lead quality assurance efforts, and mentor or supervise dietitians and staff in complex patient care situations. Qualifications: All Levels: • Bachelor’s degree or higher in nutrition or related field from an ACEND-accredited program, • Registered Dietitian (RD/RDN) credential through CDR, • Texas state licensure (or within 90 days of hire), • Food Safety and BLS certifications (or within 90 days of hire), • Valid driver’s license, • Preferred: Bilingual in English and Spanish Level I: • Completion of ACEND-accredited Dietetic Internship., • New graduate to 3 years experience. Level II: • Minimum of 3 years (6,240 hours) of direct clinical nutrition care, • Preferred: Master’s degree or specialty certification (e.g., CSP, CSPCC, RDN-AP), • Preferred: Experience in specialized pediatric programs (e.g., NICU, oncology, feeding disorders) Level III: • Minimum 6 years’ experience in nutrition care, education, counseling, private practice, community/public health, school system, long-term care or related field with valid NDTR credential or other professional designation., • Preferred: Master’s degree or specialty certification (e.g., CSP, CSPCC, RDN-AP) preferred, • Preferred: Experience in specialized pediatric programs (e.g., NICU, oncology, feeding disorders) Compensation & Benefits We offer competitive salaries with sign-on bonuses and relocation assistance, along with a comprehensive benefits package that includes health insurance, retirement plans, and generous paid time off for our part time employees. We also provide ongoing professional development opportunities to support your career growth. For a detailed overview of our benefits, visit: Driscoll Children's Hospital Employee Benefits. Why live in Brownsville, TX? Nestled at the southernmost tip of Texas along the Gulf Coast and the U.S.–Mexico border, Brownsville offers a warm, welcoming community with a unique blend of coastal charm, cultural richness, and economic opportunity. As one of the most historic cities in Texas, it combines a small-town feel with the conveniences of a growing urban area. • Cultural Heritage: Brownsville’s vibrant bicultural atmosphere is reflected in its festivals, cuisine, music, and historic architecture. From the Charro Days Fiesta to authentic regional dining, the city celebrates its heritage with pride., • Affordable Living: Brownsville boasts a low cost of living, a variety of affordable housing options, and no state income tax—making it easier to enjoy life while advancing your career., • Family-Friendly Environment: Known for its safe neighborhoods, quality schools, and strong sense of community, Brownsville offers plenty of family-oriented activities, parks, and events year-round., • Outdoor Recreation: Just minutes from South Padre Island, residents enjoy easy access to beautiful beaches, fishing, boating, and watersports. Birdwatching, hiking, and exploring the area’s unique wildlife refuges are also local favorites., • Career Growth & Connectivity: Brownsville’s economy is growing in healthcare, education, manufacturing, and international trade. Its proximity to major highways, an international airport, and the Port of Brownsville provides strong regional and global connections. Whether you’re seeking career opportunities, a coastal lifestyle, or a culturally rich community, Brownsville offers the perfect mix of professional growth and personal enjoyment.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking a strategic and results-driven Partner Network Manager to lead our Partner Network initiatives. This role is akin to a supplier development position, focusing on cultivating and managing a high-performing network of partners. You will be instrumental in enhancing partner capabilities, driving performance, and ensuring alignment with our operational goals to deliver exceptional outcomes for our customers. A typical day will consist of peeling back the lens to determine how to improve the quality of your Suppliers by both serving as an advocate and coach. You will become a trusted resource for your cohort with the end goal of improving customer outcomes by reducing manufacturing variability. Responsibilities: • Optimize partner performance by analyzing data to improve supplier performance by enforcing Xometry Manufacturing Standards., • Identify performance / training gaps within your portfolio and develop strategies to improve partner outcomes., • Create and implement partner certification programs to establish quality benchmarks and standards, akin to supplier quality assurance. Focused on building trusted partnerships and predictable outcomes (quality and OTS)., • Manage the Partner Outsourcing Group program, including eligibility identification, sufficient vetting to quality requirements, and promotion/demotion dependent on individual Partner Performance., • Develop tailored training and coaching programs to elevate partner capabilities and performance, mirroring supplier development initiatives., • Manage operational escalations and provide timely resolutions to ensure partner satisfaction., • Lead initiatives to reduce partner churn and maintain a robust network., • Serve as the ITAR conversion leader., • Conduct on-site assessments to establish best practices and promote "Xometry Certified" partners., • Maintain comprehensive training records and standardize partner training materials., • Collaborate with marketing teams to drive partner acquisition strategies and campaigns., • On-time delivery (OTD) and quality metrics in line with industry standards., • Return Merchandise Authorization (RMA) and rejection rates at or below target levels., • Margin performance aligned with (QM) objectives., • Net Promoter Score (NPS) and Customer Satisfaction (CSAT) metrics exceeding expectations.Qualifications / Requirements:, • Bachelor's Degree or equivalent required., • 8+ years serving as a lead/leader in supply chain or manufacturing., • Experience with manufacturing, machining, and the language and rhythms of the manufacturing environment is a strong plus (at least one role will specialize in transaction support for manufacturers)., • Proven ability to analyze data and implement strategic improvements.to balance customer and supplier needs., • Proven track record of identifying knowledge gaps and delivering training and mentorship to develop others is a plus., • Top-class analytical skills – understands the importance of data and acumen and converts insights into action., • Strong communication and presentation skills., • Experience in developing and delivering training programs., • Fluency with presentation, document, project management and other essential business applications. #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Responsibilities: 10+ years of experience in Project Management, with experience managing large, highly visible software and application development projects related to manufacturing systems within the retail industry.

Job Description Job Title: Extrusion Operator Job Summary: The Extrusion Operator is responsible for producing blown film plastic rolls and ensuring the smooth operation of extrusion machines. This role requires troubleshooting both mechanical and electrical issues, performing regular maintenance, and preparing resin mixes for film production. The position operates on a 12-hour shift schedule, and employees are expected to adapt to changes in job duties as needed to meet the organization's production goals. Essential Duties and Responsibilities: • Adhere to production schedules to meet production goals., • Monitor and adjust machine temperature, oil levels, and screen packs regularly throughout the shift., • Replace dies and heater bands according to product specifications., • Troubleshoot and resolve mechanical and electrical issues to ensure smooth machine operation., • Prepare resin mixes for film production based on specifications., • Collaborate with schedules and planners to ensure the correct film type is produced., • Ensure compliance with safety standards and company policies during machine operation and throughout the production area., • Perform additional duties as assigned to meet organizational needs., • Maintain accurate records of production runs, downtime, and any machine adjustments or repairs., • Ability to meet output requirements while maintaining quality., • Mechanical aptitude with the ability to troubleshoot, repair, and operate extrusion machines., • Strong interpersonal communication skills to work effectively with teams and management., • Ability to read and interpret standard operating procedures (SOPs) and product specifications., • Proficient in basic math (reading, writing, and using a calculator)., • Ability to stand, walk, and sit for extended periods., • Must frequently lift or move up to 75 pounds., • Occasionally push or pull up to 1600 pounds with proper equipment., • Must be able to climb, kneel, crouch, and crawl as needed., • Regular use of hands and arms for handling materials, adjusting equipment, and performing machine repairs., • Work is performed in a manufacturing environment with exposure to moving mechanical parts, high humidity, and potential airborne particles., • Willingness to work in shifts, including weekends, as needed.Company DescriptionAt Partners Personnel, we deliver more to every employee and client we serve. Our team of staffing industry experts is dedicated to helping our employees advance their careers while connecting our clients with the nation’s top talent. Experience the difference of staffing made personal at Partners Personnel.At Partners Personnel, we deliver more to every employee and client we serve. Our team of staffing industry experts is dedicated to helping our employees advance their careers while connecting our clients with the nation’s top talent. Experience the difference of staffing made personal at Partners Personnel.

Job DescriptionOverview Allied Universal®, North America's leading security and facility services company, offers rewarding careers that provide you a sense of purpose. While working in a dynamic, welcoming, and collaborative workplace, you will be part of a team that contributes to a culture that positively impacts the communities and customers we serve. Job Description As a Security Officer - Industrial Access Control in El Paso, TX, you will serve and safeguard clients in a range of industries such as Manufacturing & Industrial, and more. As an Access Control Officer with Allied Universal at a manufacturing and industrial location, you will monitor and patrol assigned areas, help to deter security-related incidents, and maintain a visible presence. You will provide outstanding customer service and clear communication while upholding our values of teamwork, integrity, and putting people first. Join a team that is agile, reliable, and innovative, and make a meaningful impact every day. Position Type: Full Time Pay Rate: $12.50 / Hour Job Schedule: DayTimeMon02:00 PM - 10:00 PMTue02:00 PM - 10:00 PMWed02:00 PM - 10:00 PMSat06:00 AM - 02:00 PMSun06:00 AM - 02:00 PM Why Join Us: • Smart Tools: Access to our exclusive technology to view and claim additional shifts to earn more., • Career Growth: Get paid training and access to career growth opportunities., • Financial and Health Benefits: Enjoy access to a retirement savings plan, plus medical, dental, vision, basic life and AD&D, and disability insurance., • Monitor and control access to the manufacturing and industrial location, verifying credentials and authorizations for entry and exit., • Provide customer service by following security-related procedures and site-specific policies, and responding appropriately to emergencies., • Respond to incidents and critical situations in a calm, problem-solving manner, maintaining professionalism at all times., • Conduct regular and random patrols throughout the facility and along the perimeter to help to deter unauthorized activity and/or breaches., • Observe and report any unusual activity, security-related hazards, or maintenance issues to the appropriate personnel., • Maintain accurate logs and reports of daily activities, incidents, and any access control concerns., • Be at least 18 years of age for unarmed roles; 21+ years of age for armed roles., • Possess a high school diploma or equivalent., • As a condition of employment, applicants will be subject to a background investigation in accordance with all federal, state, and local laws., • Allied Universal will consider qualified applications with criminal histories in a manner consistent with applicable laws., • As a condition of employment, applicants will be subject to a drug screen to the extent permitted by law., • Licensing requirements are subject to state and/or local laws and regulations and may be required prior to employment. If you have difficulty using the online system and require an alternate method to apply or require an accommodation, please contact our local Human Resources department. To find an office near you, please visit: . Requisition ID 2025-1492427

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.

Job DescriptionSaddles, Krispy Kreme Our Krispy Kreme Managers are the best in the business. As the leader in the shop, you are the “Guardian of the Original Glazed”--making sure all products, personnel and store cleanliness are up to Krispy Kreme quality standards. Weekly financials, employee supervision and general merry-making are all a part of this coveted slot. Overview of Position: The 2nd Shift Manager is responsible for assisting the Assistant General Manager and General Manager for sales and pm operations of the store. The 2nd Shift Manager maintains an organization that exceeds customer expectations, fosters teamwork among staff, develops staff members' abilities and competencies, and works to achieve the financial objectives established for the assigned location through revenue and cost management initiatives. Their long-term objective is to develop skills towards becoming an Assistant General Manager. Position Responsibilities: • Must be able to perform the responsibilities of all key store positions (Cashier, Doughnut Decorator and Doughnut Maker and Sanitation)., • Must be able to efficiently perform all duties related to opening and closing procedures., • Assist the management team with store sales efforts, which include retail sales, fundraising sales, and route sales., • Achieve business plan, sales objectives and profitability as described in the store budget by managing income and expense budgets., • Assist the management team with promoting store sales through local store marketing., • Manage company resources responsibly including cash, inventory, and equipment., • Complete required corporate reporting documentation timely and accurately., • Understand and implement procedures to maximize efficiencies and control variances in daily production of product and overall store performance., • Understand and implement store quality control procedures, including Krispy Kreme standards., • Coordinate production schedules to meet customer demands; minimizing labor hours while maximizing Hot Light hours., • Demonstrate safety consciousness and promote store safety thru meetings, postings, training, and reporting incidents to supervisor and Human Resources., • Greet customers with a sincere smile and listen carefully to their needs., • Maintain a high level of store sanitation and cleanliness., • Assist in the proper upkeep of store facility, office equipment and doughnut production line., • Assist in scheduling maintenance to prevent equipment failure., • Report any equipment failure or issues to supervisor in a timely manner., • Assist in properly maintaining and upkeep of all delivery vehicles., • Assist in coaching, training, documentation, and dispute resolution of employees., • Assist in building a team of friendly, customer-focused employees., • Demonstrate leadership in employee development., • Consistently enforce all store policies, standards, and practices and model them yourself., • Assist management team in implementing directives from Krispy Kreme corporate and Glazing Saddles management., • Maintain store organization to promote efficient operations., • Perform other related duties as assigned., • Follow all Krispy Kreme standards for Food Safety Program and HACCP Plans., • Company provides Uniform of 1-cap, 1-tee shirt, 1-name tag and 1-apron as an employee to be worn during shift. Employee must wear blue jeans (no holes, washout or ripped) and black belt. Non-Slip shoes must be worn at all times. Maintain a clean, neat Glazing Saddles issued uniform at all times. Essential Skills and Experience: • High School Diploma or equivalent, • Must be able to read and communicate using the English language, • Ability to make simple mathematical calculations, • Food Service experience, • Proficient in Microsoft Excel, Word and Outlook, • Pleasant disposition, sociable, accommodating nature, and enthusiastic, • Ability to organize and manage multiple priorities, • Ability to lead people and get results through others, • Ability to work with minimal onsite supervision, • Experience with basic equipment repair and maintenance, • Hot Schedules Experience, • Manufacturing equipment knowledge Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing duties of job, employee is occasionally required to stand, walk, sit, climb; handle objects, tools or controls; reach with extremities; hear, see and communicate with employees and customers. Must lift and/or move up to 50 pounds, occasionally overhead. Must be able to fill two (2) doughnuts at one time. Must be able to operate a forklift or pallet jack; pushing or pulling up to 2,500 lbs.