Manufacturing management jobs in Vineland, New JerseyCreate job alerts

Job DescriptionBenefits: • Dental insurance, • Health insurance Location: Vineland, New Jersey Job Description Objective: Contributes to the overall manufacturing environment by completing preventative maintenance, completing and participating in projects to increase overall equipment efficiency, be able to troubleshoot general mechanical and electrical issues on production lines including conveyors and packaging equipment. Engage with operators and management team to develop and execute process improvement initiatives. Responsibilities • Conducting and completing scheduled preventative maintenance to maintain equipment efficiency., • Knowledge of Computer Maintenance Management Systems (SAP preferred)., • Disassemble and assemble equipment for new installation and repair existing equipment., • Assist operators in mechanical and electrical capacities to ensure production lines remain operational., • Servicing and maintaining equipment including motors, conveying systems, transmission systems, and production related equipment., • Knowledge of using human machine interfaces to ensure equipment is operating on center lines., • Ability to convert production lines to produce various products of different sizes materials., • Properly troubleshoot and maintain glue and adhesive systems on packaging equipment., • Know the function and be able to troubleshoot photo eyes, sensors, and pressure switches., • Properly wire 120 to 240-volt single phase and 480-volt three phase circuitry., • Familiarity with boiler operations., • Familiarity with industrial maintenance equipment (drills, saws, pipe cutters, etc.), • Provide maintenance support required to sustain continuous production on the Food Service line., • Lubricate all machinery with the proper lubricants., • Change drive belts, timing belts, etc., on all machinery., • When possible, identify problems before they result in a hazard or downtime situations., • Maintain water towers and test water., • Operate air compressor and change filters and oils., • Change packing and gaskets in all pumps., • Operate roof heaters and air conditioners., • Identify and replace bearings and seals as required., • High school diploma or GED preferred., • Experience in an industrial environment handling sanitizing chemicals and non-toxic food products desired., • Training in forklift and pallet jack operation helpful., • Must be able to read and comprehend instruction sheets provided with cleaning chemicals; strong mechanical aptitude helpful., • Ability to work cooperatively with a team., • Must have visual, auditory, physical and mental ability to operate equipment safely.

Job Description ALL MAINTENANCE PERSONNEL WILL WORK TOGETHER TO ENSURE A SAFE OPERATION; QUALITY OF SERVICES RENDERED, AND THAT THE OPERATION OF THE MAINTENANCE DEPARTMENT MEETS OR EXCEEDS STANDARDS. RESPONSIBILITIES: The Maintenance Mechanic responsibilities focus on basic skills as well as the knowledge and concepts needed to maintain plant electrical, electro-mechanical, and electronic equipment. General responsibilities include but are not limited to performing preventative and corrective maintenance functions required for plant electrical equipment. All individuals assigned to the department are to work together in a safe, efficient and effective manner to insure the production of a quality product. To achieve this level of operations all employees are required to comply with all applicable Plant and OSHA safety rules as well as the National Electric Code. NORMAL DUTIES: (include the following) • To perform maintenance as needed on various machines, equipment, or systems to enhance the manufacturing operation., • Maintain information for, or input into, the computer system in a timely manner., • Make adjustment needed to ensure product being produced meets all quality standards. QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must have demonstrated the ability to perform the normal duties of this job as well as all lower classifications. The requirements listed below are representative of the knowledge, skill, and/or ability required. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Minimum of two years of demonstrated work experience preferably in manufacturing setting., • Demonstrate Mechanical Aptitude., • Demonstrate Industrial Electrical technology., • Understand and demonstrate basic fabrication and welding., • Understand & demonstrate basic Industrial Electricity+, • Be proficient in reading electrical schematics. EDUCATION and/or EXPERIENCE: Two to three years related experience and/or training; or equivalent combination of education and experience. Candidates will demonstrate their level of experience. • Must demonstrate a thorough understanding of the operation of all plant equipment., • Must be able to complete all jobs assigned in a safe and efficient manner with minimal supervision. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: Able to use computers in troubleshooting, completing work orders and other related job duties. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move in excess of fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts, electrical components and steam. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. Reasonable accommodations may be made to enable individuals with disabilities to perform the normal job functions. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and Inside sales selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. POSITION SUMMARY: The Machine Operator is responsible for the procurement To operate machinery in a safe and efficient manner and produce product per customer specification. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Operate production equipment to produce products in accordance with production needs., • Complete equipment set-up's in accordance with customer specifications and quality procedures., • Produce assigned products in accordance with verbal and written instructions., • Record length of time and quantity of materials used for each job., • Inspect parts and document findings on appropriate paperwork as needed., • Notify management of product discrepancies, equipment malfunctions and/or personal injuries., • Adhere to established policies and procedures paying special attention to safety regulations., • Maintain work areas in a clean, orderly and safe manner to include returning tools to designated areas., • Wear personal protective equipment in accordance with training guidelines., • Rubber machine operator (molding) position requires heat resist sleeves & gloves, safety glasses, and during set up steel toe tips., • Seals machine operator position requires safety glasses, ear plugs and during set up steel toe tips, • Required to wear proper gowning for specific areas, • Maintain good housekeeping and EHS requirements, • High School diploma, GED or equivalent, • 3-5 years of proven Machine Operator experience, • MS Office Suite, SAP a plus WORK ENVIRONMENT / CONDITIONS / PHYSICAL DEMANDS:

Job Description Areas of Responsibility • Overall responsibility for repairs and maintenance of the plant’s assets., • Responsibility for the welfare and management of the engineers., • Set the priorities from the Maintenance Management System outstanding list in coordination with the department supervisors, organizing and delegating the work to the maintenance technicians. Follow up to ensure work was completed at a high standard., • Effective decision making with respect to the cost of repairs., • Strive to find better and more efficient ways of repairing and maintaining machinery., • Actively engage with the operations team to develop a team approach to effective maintenance., • Coach, mentor, develop and set goals for our engineers to realize their full potential. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization may exist. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: Able to use computers in troubleshooting, completing work orders and other related job duties. Education: • High School Diploma or equivalent, • Minimum 5 years in a position in a corrugated manufacturing environment (Engineering) Preferred, • Proven experience in management/supervising positions., • Engineering qualifications (preferred), • Mechanical, electrical & automation experience., • Corrugator or Converting Manufacturing Process Experience., • Passion for continuous improvement and strong will to deliver results., • Sense of urgency & service oriented., • Managerial skills, • Maintenance qualifications (must) Mechanical, electrical & automation experience., • Corrugator or Converting Manufacturing Process Experience (preferred), • Passion for continuous improvement and strong will to deliver results., • Sense of urgency & service oriented., • Managerial skills Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran. Applicants must be authorized to work for any employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. PHYSICAL DEMANDS: The physical demands described here are representatives of those that must be met by an employee to successfully perform normal job functions. While performing the duties of this job, an individual is regularly required to stand; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk or hear; and taste or smell. An individual frequently is required to stoop, kneel, crouch, or crawl. An individual must regularly lift and/or move up to ten pounds, frequently lift and/or move up to twenty-five pounds, and occasionally lift and/or move in excess of fifty pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an individual encounters while performing the normal job functions. While performing the duties of this job, an individual regularly works near moving mechanical parts, electrical components and steam. The employee is occasionally exposed to wet and/or humid conditions and temperature variations. The noise level in the work environment is usually moderate. THESE RESPONSIBILITIES AND DUTIES ARE NOT INTENDED TO BE ALL-INCLUSIVE. RESPONSIBILITIES AND DUTIES MAY BE ADDED OR DELETED AS NECESSARY.

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value-added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and Inside sales selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. POSITION SUMMARY: A Process Technician is responsible for evaluating and creating new process procedures for the rubber department. This position takes direction from the rubber manager to coordinate with production /sampling needs. The Process Technician develops the design of new products and helps to cost the jobs according to manufacturing processes and tooling required. The Process Technician ensures all processes are documented. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Responsible for all aspects of the compression molding process, including, but not limited to, set-up and tear-down, troubleshooting, equipment maintenance, and workflow., • Work with production personnel to ensure molded components meet requirements; adjusting as required., • Provide molded components promptly to ensure production schedules are met., • Generate documentation on molding runs that can be used to control traceability and ensure reproducibility., • Troubleshoot electrical/mechanical systems and connections between Tool/Die and the machines., • Analyze, install, test, and review machine settings to increase operating efficiency., • Complete required paperwork routing/setup sheet, • Confer with Supervisor, area leaders, or others to resolve molding and trimming issues ., • Optimize material utilization through process and improve scrap reduction., • Identify employee training needs and communicate to Operations Manager., • Maintain good housekeeping and EHS requirements., • Minimum of 5 years’ experience in compression molding or similar, • High school diploma or equivalent, • Excellent organizational skills., • Experience with Process Control Documentation, • Ability to develop process sheets and set parameters for current and new products., • Must have good oral and written communication., • Ability to lift 50 lbs., • Able to stand for long periods of time. Must have the ability to sit, stand or walk for extended periods of time. Specific vision abilities required by this job include close vision and ability to adjust focus. Lift up to 50 pounds. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. Domestic / International travel occasionally. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function

Experience in all facets of Engineering, Procurement, and Construction Management (EPC). The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other non-administrative areas. Berkshire Hathawa

Job Description Pharmacy Manager/ Pharmacist in Charge This description is intended to be illustrative of the major duties performed by the employee assigned to this position. Performs other duties as assigned. Why Join Leiters Health? Are you passionate about making a real impact in the pharmaceutical industry? Do you thrive in a collaborative, innovative environment where your skills and ideas are valued? Look no further – Leiters Health is seeking talented individuals like you to join our dynamic team! At Leiters Health, we're not just another pharmaceutical company – we're pioneers in the field, dedicated to delivering high-quality compounded sterile products and outsourced solutions to healthcare providers nationwide. Our commitment to excellence and patient safety is at the core of everything we do. • Innovative Culture: Be part of a forward-thinking company that encourages creativity, welcomes fresh ideas, and fosters an environment of continuous improvement., • Meaningful Work: Contribute to a purpose-driven organization dedicated to providing critical medications and healthcare solutions that positively impact patients' lives., • Professional Development: Access ongoing training, mentorship, and growth opportunities to expand your skills and advance your career within a rapidly growing industry., • Cutting-Edge Technology: Work with state-of-the-art facilities and advanced technologies, staying ahead of the curve in pharmaceutical manufacturing. We're seeking enthusiastic individuals who are driven, adaptable, and passionate about contributing to a mission-driven organization. Whether you're an experienced professional or just starting your career, Leiters Health provides an environment where your skills and talents will be recognized and appreciated. Sound like you? Apply today! This position will report directly to the Director of Corporate Quality and Compliance (PharmD). The Pharmacy Manager / Pharmacist-in-Charge (PIC) is responsible for applying clinical knowledge to appropriateness of formulation, processes, and procedures related to sterile pharmaceutical manufacturing and related activities in a 503B Outsourcing Facility. The Pharmacy Manager / PIC will work collaboratively with other pharmacists, technicians, and various staff members to manufacture sterile drug products to fill customer orders in compliance with all regulatory requirements and company policies and procedures. Quality Assurance Pharmacists and Regulatory Support Technicians will report to the Pharmacy Manager / PIC . Essential Functions: • Review and verify formulation (compounding) activities and documentation performed by technicians and other support staff for completeness, accuracy, and adherence to cGMPs. Such verifications may require ISO 8 cleanroom gowning attire and functions., • Perform the final review and release of batches., • Ensuring compliance with all federal, state, and local regulations related to facility activities, USP 797, cGMP, and controlled substances, • Author, review, and/or approve various cGMP documents such as customer complaint investigations, adverse drug event investigations, deviations, CAPAs, SOPs, Change Controls, Master Product Batch Records, and Annual Product Review reports., • Create, update, and approve product labels and determine appropriate label content per applicable regulations., • Train manufacturing technicians to perform pharmaceutical calculations., • Perform DEA recordkeeping activities., • Perform required federal and state regulatory reporting as applicable., • Efficiently utilize tools and metrics (KPI’s) to monitor staff productivity, deliverables, timelines, and quality of work product to adjust staffing levels and operational processes as needed to ensure operational effectiveness., • Participate in internal audits, regulatory inspections, and customer audits as necessary., • Answer clinical questions from physicians, nurses, and other healthcare providers., • Work collaboratively with members from various teams to achieve company goals., • Maintaining active pharmacist licenses in all states that require PIC licensing., • Directly supervise Quality Assurance Pharmacists and Regulatory Support Technicians., • Foster a positive and productive work environment, providing guidance, coaching, and mentoring., • Conduct regular 1:1’s to address performance, feedback and relationship building., • Pharmacy Degree (PharmD preferred), • Licensed Pharmacist in the state of site location (New Jersey) and all states that require PIC licensing. Candidates without all required licenses will be required to obtain all necessary licenses after hire., • 3 years’ experience in a 503(b) outsourcing facility OR R&D or pharmacovigilance role in the pharmaceutical industry OR other relevant management experience required, 5 years preferred., • Familiarity & Understanding of Sterile Manufacturing/Processing (USP testing, sterilization techniques, etc.) preferred, • Familiarity & Comprehension of regulations including DQSA, 21 CFR 211 and USP guidelines, as applicable., • Good computer skills, including but not limited to Word, Excel, PowerPoint, • Excellent interpersonal and communication skills, both verbal and written, • Ability to assume responsibility and act on own initiative, • Ability to lead and influence a team to achieve desired goals, • Good self-management, organizational and planning skills, • Ability to adhere to strict deadlines and procedures, • Excellent reasoning and critical thinking skills, • Hands- on approach with a “can-do” attitude and results orientation, • 100% employer paid medical plan., • Dental & Vision insurance options including FSA & HSA, • Employer Paid Life Insurance & Employee Assistance Program, • Short Term & Long-Term Disability Insurance, • Up to 4% 401K Matching (100% vested on day one!), • Generous Paid Time Off Options – vacation, sick, paid leave and holidays!, • $5,250 Annual Tuition Reimbursement after 6 months, • $1,000 Referral Bonus Program with no limit, • Eligible for annual bonus program Location: New Jersey Timeline: We will be accepting applications on an ongoing basis until position is filled. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. *Please note that we do not work with third-party recruiters or agencies for this position. If you are a qualified candidate and wish to apply for this job, please do so directly through our official application process. We appreciate your understanding and cooperation in this matter.

Experience in all facets of Engineering, Procurement, and Construction Management (EPC). The employee is designated for field work and attends activities at client sites where they work in construction, process, packaging, manufacturing, research, or other "non-administrative" areas. Berks

Job Description We are looking for a skilled HR-Generalist to join a team in Vineland, New Jersey. This is a contract to permanent position, offering an excellent opportunity to contribute to a dynamic manufacturing environment while advancing your career in human resources. The ideal candidate will thrive in a fast-paced setting, possess strong interpersonal skills, and be eager to take ownership of HR functions. Responsibilities: • Manage employee relations by addressing concerns and fostering a positive workplace environment., • Oversee onboarding processes to ensure smooth transitions for new team members., • Administer benefit programs and assist employees with related inquiries., • Maintain and update HR records in compliance with organizational policies., • Implement and manage HRIS systems to enhance operational efficiency., • Support daily HR operations, including paperwork processing and policy enforcement., • Develop strategies to modernize HR practices, transitioning from paper-based to digital systems., • Collaborate with management to identify workforce needs and support organizational goals., • Provide guidance to staff regarding HR policies and procedures., • Take the lead in running the HR department independently after the current HR manager retires., • Minimum of 2 years of experience in human resources, preferably in manufacturing or warehouse environments., • Strong knowledge of employee relations and HR administration., • Proficiency in onboarding processes and benefit functions., • Familiarity with HRIS systems and the ability to implement new technologies., • Excellent organizational skills and attention to detail., • Ability to work independently and handle HR responsibilities with minimal supervision., • Effective communication skills and the ability to interact with diverse teams., • Thick-skinned and adaptable to challenges in a fast-paced work setting.