Trabajos inspector en Vineland, New JerseyCrear alertas

Job Description DataONE Construction is Hiring: QA/QC Associate (Electrical) Vineland, NJ – Data Center Project Now Hiring: Receiving & Electrical Site QA/QC Inspector Job Location: Vineland, NJ 08360 Hourly Pay:$20 – $35 per hour (PAY IS BASED ON EXPERIENCE AND SKILLS) Hours: 70-80 hours a week Duration: 2+ years Perdiem: $150 per day, 7 days a week(for candidates living 90+ miles from the jobsite) Safety Classes Required:OSHA 10, NFPA 70E, LOTO, Fall Protection, Motorized Platform, Harassment Hardware:iPad, ProCore Access Receiving & Electrical Site QA/QC Inspector Position Summary: The Receiving & Electrical Site QA/QC Inspector is responsible for overseeing incoming material and equipment deliveries while also performing field quality inspections of electrical construction activities. This dual-role position ensures that materials meet project quality requirements prior to release and that installed electrical work complies with project specifications, approved drawings, applicable codes, and quality standards. The role works closely with Logistics, warehouse teams, field personnel, and the QA/QC Manager to maintain accurate receiving records, support material traceability, document installations, track deficiencies, and uphold overall project quality requirements. Key Responsibilities: • Perform receiving inspections for incoming equipment and materials, documenting delivery conditions with detailed photographs and retaining packing slips., • Inspect materials/equipment for damage, incorrect quantities, improper labeling, shipping discrepancies, and visible quality defects., • Generate and report nonconformance findings for damaged or nonconforming materials; coordinate with vendors, logistics, and project teams on resolutions., • Tag, label, identify, and coordinate quarantine/hold areas for rejected or damaged materials., • Assist with inventory verification, material tracking, and project closeout documentation related to receiving records., • Perform daily field inspections of installed electrical work across all electrical construction scopes., • Verify installations comply with approved drawings, project specifications, applicable codes, and industry standards., • Complete insulation resistance reports, equipment setting inspection checklists, torque reports, and other required QA/QC documentation accurately and timely., • Document installation progress, deficiencies, and nonconforming work using photographs and field reports., • Ensure all QA/QC documentation is properly uploaded and maintained in project systems (Procore, SharePoint, etc.)., • Support commissioning, pre-functional inspections, electrical energization activities, and Request to Energize (RTE) processes as directed., • Participate in quality meetings, walkthroughs, and assist in maintaining project readiness for audits, turnover, and final acceptance. Qualifications: • Experience in QA/QC inspection, receiving, warehouse operations, or construction/material inspection preferred., • Experience in electrical, mechanical, industrial, or data center construction environments strongly preferred., • Ability to read packing slips, material lists, construction drawings, and specifications., • Familiarity with Procore, SharePoint, or similar quality/document control systems preferred. (REQUIRED), • Strong attention to detail, organizational skills, and basic computer proficiency (Microsoft Office and photo documentation)., • Ability to use an iPad, • Ability to communicate professionally with vendors, field personnel, project teams, and management., • OSHA 10 and NFPA 70E certifications preferred. Preferred Skills: • Knowledge of material handling, storage requirements, and nonconformance reporting processes., • Experience with quality documentation, inspection workflows, testing procedures, and construction codes/standards., • Familiarity with mechanical and electrical equipment identification., • Forklift experience. Physical Requirements: • Ability to work in warehouse, onsite laydown yards, and active construction environments (indoor and outdoor)., • Ability to lift and move materials within reasonable limits., • Ability to stand, walk, climb ladders, access elevated areas, and navigate uneven terrain for extended periods., • Ability to work extended hours and weekends as required by project schedules. Compensation & Benefits Package: Hourly Pay:$20 – $35 per hour (PAY IS BASED ON EXPERIENCE AND SKILLS)- We actively look at worker performance and offer chances for raises depending on various factors • Manager-to-Employee Reviews Yearly Overtime:Time and a Half Pay after 40 hours Saturday:Automatic Time and a Half Pay Sunday:Automatic Double Time Pay Holidays:Double Time Pay + 8 hours of Holiday Pay (if eligible for Holiday Pay) Per Diem:$150 per day (for candidates living 90+ miles from the jobsite) Benefits:Health, Vision, and Dental insurance (Eligible after Probationary Period) Paid Time Off:Vacation, Sick, Bereavement, and Floating Holidays (Eligible after Probationary Period) Paid Holidays(New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving Day, Christmas Day) Drive Time (Going from one Jobsite to another Jobsite) This combined role is ideal for a detail-oriented professional who thrives in a fast-paced data center construction environment and wants to contribute to both material quality control and electrical installation quality. You should be proficient in: • Quality Inspection Experience

Job Description Position Summary This position is responsible for completing, but not limited to, lot control (when required) and quality inspections, paperwork and maintaining a filing system for this paperwork. The position may also perform incoming inspection, product and process audits on material. The QC Inspector will assist with calibration plus final inspection and acceptance for in plant processes. This inspector may also be requested at times to provide coverage in other locations/divisions than currently assigned. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Record lot traceability information and maintain lot traceability database., • Conduct inspections – incoming inspections, PDS inspections, • Product audits and final product quality inspections., • RGA support, • Ensure/Assist with calibration of equipment, • Participates in the Internal Audit Program, • Operates all equipment in a safe and professional manner, while completing tasks on a timely basis., • Understand the DWK Quality Policy and relevant Quality Objectives., • Recognize his/her contribution to the effectiveness of the OPS including the benefits of improved performance., • Observe all safety precautions, rules and regulations and maintains work area in a clean and safe manner., • Works within the guidelines of ISO and EHS.Other duties as assigned. Education and/or Experience • High School diploma or GED equivalent preferred, • One (1) year experience in a manufacturing environment preferred, • One (1) year of prior quality experience preferred, • Computer literate. SAP knowledge a plus. Work Environment / Conditions / Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, stand, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, bend, talk and hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Work will take place in an office and warehouse environment. Employee may be required to work weekends, holidays and be on-call on occasion. The employee may encounter controlled air conditions with frequent air changes, environmental exposure. These are considered essential duties and are illustrative of those job tasks, which are fundamental. Employees may be required to perform additional related duties as may be assigned by management. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring Construction Inspectors. Our ideal candidate is seeking to grow their knowledge on highway, roadway and bridge projects throughout NJ with agencies such as NJDOT, NJTA, SJTA, DRPA, DRJTBC, and/or experience with Local County and State agencies. Responsibilities will include, but are not limited to: • Observe construction activities to ensure compliance with plans and specifications., • Prepare daily reports, quantity measurements and computations. Assist with progress reports and Pay Estimates., • Communicate with the Senior Management to assist with meeting the project goals. Job Requirements: • B.S. in Civil Engineering or at least 2 years of prior experience in Construction Inspection through internships or employment required., • NICET all Levels a plus but not required., • ACI, NJSAT, TCC, CCTC, and/or OSHA 10 a plus but not required., • Able to work overtime, some nights, or weekends as needed., • Ability to drive to and from, on, or around a project site during all times of the day., • Strong organization and communication skills., • Valid Driver's License Pay Range: $29/hour to $35/hour Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description BACKGROUND: DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world’s laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and Inside sales selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. POSITION SUMMARY: The Shift Supervisor oversees all plant operations during the assigned shift, ensuring production goals are met safely, efficiently, and in compliance with quality standards. Reporting to the Operations Manager, this role directs and coordinates the workforce, assigns daily tasks, monitors material usage, and resolves operational or personnel issues as they arise. The Supervisor also ensures adherence to safety and environmental guidelines, maintains effective communication with management, and supports employee development through training and performance feedback, fostering a productive and high-performing team environment. ESSENTIAL DUTIES AND RESPONSIBILITIES: • Oversee all production activities that are scheduled to be run during the off-shifts., • Oversee the accuracy of raw materials used to produce the jobs, • Ensures production quotas are met., • Under the Operations Manager’s direction will assign daily work order instructions to the production staff, • Directs and coordinates any preventive maintenance if need be., • Direct all employee assignments., • Oversees any scheduled job set ups, • Identify employee training needs and communicate to Dept. Production Managers, • Identify employee behavioral or conduct issues and if need be initiated the appropriate discipline., • Work with the Quality Inspector in resolving all quality issues. If unable to resolve the problem, then the issue needs to be addressed with the appropriate quality manager., • Wear personal protective equipment in accordance with safety and training guidelines, • Required to wear proper gowning for specific areas, • Communicates daily with the Operations Manager and Production Managers on activities, issues etc., • Maintain good housekeeping and EHS requirements, • Perform other related duties as assigned EDUCATION and/or EXPERIENCE: • High School diploma or GED equivalent, • 3-5 years’ experience as a supervisor preferred, • Oral and Written Communication Skills, • Negotiations, reading skills and being able to read a drawing, • Computer skills, • Time Management WORK ENVIRONMENT / CONDITIONS / PHYSICAL DEMANDS: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job, • While performing the duties of this job, the employee is frequently required to walk, stand, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, bend, talk and hear, • The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds

All employees of New Jersey state, county and local government must reside in the state of New Jersey unless exempted under law.

Qualified Field Inspectors for Insurance Loss Control.Qualified Field Inspectors for Insurance Loss Control are needed in your area! Immediate placement available.Pay: We pay a competitive standard flat fee per case based on customer as well as inspection type and complexity.The dominant standard fl

Location: US - NJ - Somerset About Veeco: You probably don't realize it, but what we do at Veeco touches the lives of every person, every day. It's a bold statement, but it's true. From the smartphones in our pockets that access the world's collective knowledge, to the cloud-based services where all that information lives, to high-speed wireless communication and computing power needed to drive artificial intelligence, augmented and virtual reality, gaming and so much more, our technology is all around us. We design, develop, manufacture, and service highly complex, cutting-edge machines used by our customers to create the essential devices that drive the digital age, connect the world, and improve the human experience. Along with the world's leading technology companies, many of which are household names, we help solve their most difficult material science challenges, enabling technologies for a more connected, sustainable, and convenient world. We're looking for material difference-makers to join our growing team. Overview: As an Incoming Sr. Quality Control Inspector you will implement critical quality processes consistent with the expectations of customers in the semiconductor industry. The Incoming Quality Inspector is responsible for inspecting and/or verifying purchased parts, electro-mechanical assemblies and sub-assemblies for adherence to specifications. The inspector will work with engineering, manufacturing and purchasing to ensure quality for new and existing products, as well as adherence to specification and troubleshoot issues that may arise. Parts and assemblies will be inspected to engineering drawings, purchase orders, industry standards and Veeco specifications. Responsibilities: • Verify received materials conform to specifications by conducting visual and measurement tests; reject discrepant, unacceptable materials to ensure they are not assembled into product., • Maintain control of non-conforming material with regards to dispositioning and movements in the system. Qualifications: High school diploma and a minimum of 6 years of experience performing quality control (QC) is required. An associate degree and American Society of Quality (ASQ) certification in a related technical discipline is preferred. Local candidates to Somerset, NJ only. Relocation not supported. Knowledge, Skills, and Abilities: Candidate must have practical experience performing part inspections on machined parts, assemblies, and/or sub-assemblies. The inspections will be performed to engineering requirements designated by specifications, work instructions, or equivalent industry standard (ISO 9001:2015). Experience with operating and programming CMM. Ability to read/interpret engineering drawings (GD&T). Skilled using various mechanical inspection tools, such as micrometers and calipers. Strong communication skills, verbal & written, and ability to work independently or as part of a team Ability to use computer based systems is required. Also must have proficiency using SAP (or like material management system), Microsoft Word, Excel and Outlook Salary and Benefits: The expected salary range for this position is $51,900 - $65,700, plus a bonus opportunity. We will consider your location, experience, and other job-related factors when determining your pay. Other benefits include: Medical, Dental, and Vision Employee Stock Purchase Plan (ESPP) 401(k) with Company Match Holiday, Vacation, and Sick Time Flexible Spending Accounts (FSA) Commuter Benefits Life and Accident Insurance Disability Insurance Tuition Reimbursement Employee Assistance Program (EAP) Identity Theft Remediation Emergency Travel Assistance Veeco is an equal opportunity employer. We evaluate applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected characteristics. Veeco is committed to working with and providing reasonable accommodations to individuals with disabilities.

DWK Life Sciences LLC (DWK) was created as a result of the merger of three industry leaders and provides the world's laboratories and production environments with the most comprehensive range of labware for scientific research and technical applications as well as solutions for storage and packaging. We manufacture a full range of precision glassware and specialty products for life sciences. We also offer products and services (vials, ampules, stoppers, septa, seals, caps, bottles, tubes, flasks, and value added services) to customers seeking packaging solutions. Company revenue is generated through four primary channels: Global distributors, National distributors, Direct field selling efforts, and Inside sales selling efforts. DWK supports four primary market segments: Laboratory, Pharmaceutical, Analytical Sciences, and Industrial glass. The Shift Supervisor oversees all plant operations during the assigned shift, ensuring production goals are met safely, efficiently, and in compliance with quality standards. Reporting to the Operations Manager, this role directs and coordinates the workforce, assigns daily tasks, monitors material usage, and resolves operational or personnel issues as they arise. The Supervisor also ensures adherence to safety and environmental guidelines, maintains effective communication with management, and supports employee development through training and performance feedback, fostering a productive and high-performing team environment. Essential Duties and Responsibilities: • Oversee all production activities that are scheduled to be run during the off-shifts., • Oversee the accuracy of raw materials used to produce the jobs, • Ensures production quotas are met., • Under the Operations Manager's direction will assign daily work order instructions to the production staff, • Directs and coordinates any preventive maintenance if need be., • Direct all employee assignments., • Oversees any scheduled job set ups, • Identify employee training needs and communicate to Dept. Production Managers, • Identify employee behavioral or conduct issues and if need be initiated the appropriate discipline., • Work with the Quality Inspector in resolving all quality issues. If unable to resolve the problem, then the issue needs to be addressed with the appropriate quality manager., • Wear personal protective equipment in accordance with safety and training guidelines, • Required to wear proper gowning for specific areas, • Communicates daily with the Operations Manager and Production Managers on activities, issues etc., • Maintain good housekeeping and EHS requirements, • Perform other related duties as assigned Education and/or Experience: • High School diploma or GED equivalent, • 3-5 years' experience as a supervisor preferred, • Oral and Written Communication Skills, • Negotiations, reading skills and being able to read a drawing, • Computer skills, • Time Management Work Environment / Conditions / Physical Demands: • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job, • While performing the duties of this job, the employee is frequently required to walk, stand, sit, use hands and fingers, reach with hands and arms, climb or balance, stoop, kneel, bend, talk and hear, • The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring Resident Engineers and Senior Construction Inspectors. Our ideal candidate has experience on highway, road and bridge projects throughout NJ with agencies such as NJDOT, NJTA, SJTA, DRPA, DRJTBC, and/or experience with Local County and State agencies. Duties and Responsibilities include, but are not limited to: • Coordinate and observe construction activities to ensure compliance with plans and specifications., • Document all on-site observations of construction progress such as equipment, manpower, and materials on a Daily Inspection Report and various other reports when required., • Proactively communicate with the contractor and the client to progress the project in a timely manner to meet the project goals. Job Requirements: • NICET III-IV Certification or Valid Professional Engineers license in the State of New Jersey is required., • 7+ years of experience in construction inspection, • EIT or B.S. in Civil Engineering is a plus, • ACI, NJSAT, TCC, CCTC, and/or OSHA 10 Preferred., • Proficiency in reading blueprints, plans, and specifications, as well as familiarity with inspection tools and software., • Experience with inspection of Federal-aid projects and relevant certifications is not required but is a plus., • Experience with bridge construction is a plus., • Experience with NJTA Capex or NJDOT Site Manager is not required but is a plus., • Able to work overtime, some nights, or weekends as needed., • Ability to drive to and from, on, or around a project site during all times of the day., • Strong organization and communication skills., • Valid Driver's License Pay Range: $35/hour to $70/hour Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®