Inspector jobs in Wichita, KansasCreate job alerts

Manheim Mobile Vehicle Condition Inspector Candidates may be hired at one of the following levels depending on experience, qualifications, and business need: Mobile Inspector - Level 1 Hourly Pay Range: $15.10 - $18.89 - $22.69 per hour Mobile Inspector - Level 2 Hourly Pay Range: $16.59 - $20.72 - $24.86 per hour Mobile Inspector - Senior Level Hourly Pay Range: $18.17 - $22.74 - $27.31 per hour Additional Compensation: • Monthly performance incentive based on inspection volume. Inspectors who achieve target production levels can earn approximately $750 per month, while top performers can earn $1,000+ per month., • Guaranteed incentive during the first three full months, • Month of Hire: Prorated guarantee up to $750, • First Full Month: Guaranteed $750, • Second Full Month: Guaranteed $500, • Third Full Month: Guaranteed $500, • Reimbursement provided for business use of a personal vehicle We are currently accepting applicants at all levels. Please see the minimum requirements for each level of the role below. Job Description (Applies to All Levels) The Mobile Inspector functions as a key member of the Manheim Mobile Inspections team, responsible for conducting on-site vehicle condition inspections for dealer clients within an assigned territory. This role provides accurate, detailed, and timely documentation of vehicle condition in accordance with Manheim inspection standards, supporting client trust, marketplace transparency, and inventory flow. Mobile Inspectors build strong relationships with dealer clients by delivering consistent, high-quality inspections, acting as brand ambassadors for Cox Automotive, and actively engaging dealers to grow participation in Manheim's mobile inspection services. This role requires the ability to work with minimal supervision while demonstrating increasing independence, sound judgment, and problem-solving skills. Primary Responsibilities & Essential Functions Vehicle Inspection & Documentation Conduct thorough vehicle inspections in accordance with Manheim inspection standards. Locate, start, move, inspect, and return vehicles safely on dealer client lots. Verify vehicle identification, VINs, mileage, sub-series, and options; ensure accurate system entry. Inspect and document vehicle exterior condition, including tires, frame, glass, panels, and mechanical components. Inspect and document interior condition, including seating, dashboard, and installed options. Perform basic mechanical checks across powertrain, drivetrain, and electrical components. Identify and document damage, missing components, or inoperable features. Client Engagement & Territory Management Build trust with dealer clients through consistent quality, professionalism, and responsiveness. Educate clients on the value of Manheim Marketplace and mobile inspection services. Proactively engage with dealers to increase inspection volume and maintain active participation. Leverage data, insights, and partner input to maximize inspection efficiency and territory productivity. Adapt to changes in daily appointments and schedules to ensure effective dealer coverage. Reporting, Tools & Collaboration Prepare and submit daily activity and production reports. Utilize Salesforce.com for reporting, lead management, and customer performance tracking. Collaborate closely with Wholesale Specialists, peers, and other Manheim teams to support client success. Work effectively within a continuous improvement and Lean environment, contributing to process enhancement. Safety, Compliance & Standards Maintain production expectations as established by leadership. Demonstrate a visible commitment to safety by following all safety and health procedures. Participate actively in Safety Excellence initiatives. Comply with Manheim inspection standards, including the NAAA Frame/Structure Damage Policy. Perform other duties as assigned. Role-Specific Requirements Mobile Inspector - Level 1 Summary Entry-level role responsible for conducting vehicle inspections under established processes while learning Manheim inspection standards, tools, and client engagement practices. Minimum Qualifications High School Diploma or GED required Minimal automotive knowledge preferred (body and mechanical) 0-1 years of automotive-related experience preferred Valid driver's license with a safe driving record required Ability to meet physical and mental demands of the role within required timeframes Key Responsibilities Conduct basic vehicle inspections with accuracy and attention to detail Safely move and handle vehicles on dealer lots Accurately document vehicle condition and data in inspection systems Develop working knowledge of inspection standards and client expectations Mobile Inspector - Level 2 Summary Intermediate role responsible for independently managing assigned inspection activity, delivering high-quality inspections, and supporting growth within the assigned territory. Minimum Qualifications High School Diploma or GED plus 3+ years of experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED; or 5 years' experience in a related field. 1-2 years of automotive-related experience preferred Valid driver's license with a safe driving record required Ability to meet physical and mental demands of the role within required timeframes Key Responsibilities Independently conduct detailed and complex vehicle inspections Manage daily inspection schedules efficiently across dealer locations Build strong working relationships with dealer clients Utilize data and insights to expand inspection volume and efficiency Support continuous improvement initiatives and team collaboration Mobile Inspector - Senior Level Summary Senior role responsible for advanced vehicle inspections, mentoring peers, and serving as a trusted inspection professional within the assigned territory. Minimum Qualifications High School Diploma/GED plus 5 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED and 3 years' experience; or 7 years' experience in related field. Previous vehicle inspection experience required Strong automotive knowledge (body and mechanical) required 2-3 years of automotive-related experience strongly preferred 1 year of service with Manheim Inspections recommended Valid driver's license with a safe driving record required Ability to meet physical and mental demands of the role within required timeframes Key Responsibilities Perform advanced and high-complexity vehicle inspections Serve as a subject matter resource for inspection standards and best practices Support onboarding and development of less experienced Mobile Inspectors Maintain strong dealer relationships and inspection quality standards Model safety, professionalism, and operational excellence USD 16.59 - 24.86 per hour Compensation: Hourly pay rate is in the range of $16.59 - $24.86/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Benefits: Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. EOE, including disability/vets

Job Description Position Summary: The Construction Materials Field Technician (CMT) will be responsible for conducting on-site testing of concrete, soil, and other construction materials utilizing a company-provided vehicle to travel to various job sites within the area. Duties and Responsibilities: • Conduct observation, testing, and sampling of materials, including soils, aggregates, and concrete on construction materials testing project sites, • Execute tasks based on project requirements under the guidance of senior technicians, staff professionals, and project managers., • Conduct routine field and/or laboratory tests for soils, aggregates, and concrete using various methodologies and testing equipment following industry standards and compliance., • Performs a variety project specific observations and site assessment duties under general supervision and/or from detailed controlled procedures., • Operates testing equipment and conducts testing (example: Soil, concrete or other) and provides assessment of data through reporting., • Works utilizing drawings, specifications, and diagrams., • Makes detailed observations and gives limited interpretation of results., • Maintains detailed documentation and data from test results., • Operates a calculator to calculate mathematical test results., • Communicates effectively with client and project teams., • Must be aware of, and adhere to, safety practices and policies to ensure your own safety, as well as the safety of others who may be affected by your actions at work., • Perform calculations and data reduction based on sampling, test results, and inspection; May assist with calculations, drafting, and other administrative duties as requested., • Maintain daily communication with site contractors, fellow technicians, and project managers, • Communicate changing site conditions and additional requested testing to supervisor; Attend project meetings as requested, • Assist with organization of field equipment and notify supervisor of broken or missing equipment as needed., • Other projects and responsibilities may be added at the company’s discretion. Special Knowledge, skills and abilities: • Strong communication skills (speaking, reading, and writing). Ability to work effectively with contractors, peers, and supervisors, • Ability to lift 50-75 pounds repeatedly with or without accommodations, • Ability to read & write, including interpreting documents such as safety rules, operating and maintenance instructions, and procedure manuals, as well as the ability to write routine reports and correspondence and speak effectively with colleagues, supervisors, and customers/clients, • Computer skills sufficient to operate a laptop, including sending and receiving emails, and the ability to learn Field Data Collection (FDC)/Inspector Gadget to input data and prepare reports, • Mathematical skills sufficient to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals, • Reasoning ability to apply common sense understanding to carry out instructions furnished in written, oral, and diagram form Education and Experience: • High School Diploma or GED required, • Minimum five (5) years’ experience of field construction materials testing and/or inspection experience is preferred, • Construction and/or engineering experience License and Certification: • Willing to obtain knowledge of CMT principles and applications, as well as ASTM laboratory standards, leading to certifications in soils, concrete, and radiation safety., • Nuclear Density Guage Certification required, • ACI Field Concrete Technician Grade I Certification required, • Valid driver’s license with acceptable violation history. Work Environment: PEC values a healthy work-life balance, and we focus on working efficiently and collaboratively to ensure quality and productive work as well as quality time away from the office. The work environment is friendly, respectful, and team oriented with daily peer interactions regarding work progress, client needs and project-specific technical issues. We strive to create an enjoyable work environment with support and opportunities for positive career growth. Much of the work will be conducted in a field setting. The position requires mobility and driving. Duties involved require lifting and moving up to 100 pounds or more. Manual dexterity and coordination are required over 50% of the work period while operating equipment such as computer keyboard, mouse, calculator and similar machines. Bending, reaching, standing, and walking required. Continuously stand for up to 4 or more hours per day. Work outdoors in various weather and topographical conditions for long periods of time. Outdoor temperatures can range from above 100 degrees F to below zero degrees F. Supervisory Responsibilities (if there are no supervisor responsibilities, put N/A): • N/A

Spirit AeroSystems also has separate Quality Inspector openings that do not require an active security clearance. It is an opportunity for an experienced inspector or aerospace mechanic to apply hands-on manufacturing knowledge in a high-accountability defense environment while developing broader in

Job Description Responsibilities \tM13 Level B \tUse and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments \tExperience working with Quality Management System Policies and Procedures \tWorking knowledge of Company Policies, Procedures and Specifications \tOverall working knowledge of production processes \tGood communication skills written and verbal \tGood computing skills \tMaintain certifications as required \tFollow Inspection (shop) procedures to accept or reject processes/parts/assemblies \tVerify that tools are qualified \tPrepare and maintain Quality records \tWork across equivalent or lower-level Inspector job codes as required \tQualifications Required: \tPrompt and on time daily \tAbility to obtain all required training certifications and maintain certifications while on assignment \tMust be available to work any shift- 1st, 2nd and 3rd shift operations \tAvailable for periods of heavy overtime \t5 years' experience in aerospace airframe assembly inspection \tBlueprint reading experience \tMS Office and SAP experience \tExperience writing NCRs (Tags) \tPreferred: \tSAP experience \tBoeing 737 Airframe/Fuselage Experience \tInspector Testing Information: \tAll inspectors regardless of direct or contract must obtain their stamp within a certain amount of days after their training. That is discussed during the initial training classes \tSee the written and practical testing information below: \t \tHere is a list of the testing QA contractors are required to pass: \tAssy. Sealing (written and practical) \tPost Assy. Sealing (written and practical) \tElectrical Bond and Ground – All Meters (written) \tElectrical Bond Final Inspection (written and practical) \tPrecision Measuring Tools (written and practical) \tSkin Quality Inspection (written) \t \tIn addition, they have classes that are given to them that they are tested on and must pass: \tResearching and Creating an NCR in MES \tSolid Rivet Inspection \tBlind Fastener Inspection \tHex-Drive Bolt Inspection \tLockbolt Inspection \tBolt and Nut Inspection \tFastener Inspection on Composites

Job Description In addition, they have classes that are given to them that they are tested on and must pass: • Researching and Creating an NCR in MES, • Solid Rivet Inspection, • Blind Fastener Inspection, • Hex-Drive Bolt Inspection, • Lockbolt Inspection, • Bolt and Nut Inspection, • Fastener Inspection on Composites Inspector Testing Information: All inspectors regardless of direct or contract must obtain their stamp within a certain amount of days after their training. That is discussed during the initial training classes. See the written and practical testing information below: Here is a list of the testing QA contractors are required to pass: • Assy. Sealing (written and practical), • Post Assy. Sealing (written and practical), • Electrical Bond and Ground – All Meters (written), • Electrical Bond Final Inspection (written and practical), • Precision Measuring Tools (written and practical), • Skin Quality Inspection (written)\nCompany Description About Indotronix Indotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: iic.com. About Indotronix\nIndotronix has been providing staffing services to Fortune 500 companies and federal, state, and local government agencies for more than 38 years. We have recently been recognized as one of the largest staffing companies in the US by Staffing Industry Analysts. To learn more about us or to view additional job opportunities, please visit our website at: iic.com.

Job Description Syndeo is seeking a highly detailed, analytical, and self-motivated Quality Control Inspector for a local aircraft sheet metal fabrication and assembly facility. In this role, you will monitor active production lines, utilize precision measuring instruments, and perform thorough standard inspections to certify that raw materials, in-process components, and finished goods are in compliance with engineering blueprints, customer expectations, and internal quality metrics. Pay: Based on experience Position status: Direct-hire opportunity with both 1st and 2nd shift positions available to fit your schedule, offering long-term stability and career advancement opportunities. 1st Shift: 7:00 AM - 3:30 PM 2nd Shift: 3:30 PM - 12:00 AM Benefits: Excellent benefits package and generous PTO plan, including 100% company-paid health insurance for employees, with optional family coverage available. Essential Functions: • Production Line Monitoring: Continuously audit active production lines to verify that raw materials and finalized goods securely match established safety, customer, and design specification standards., • Equipment Setup & Calibration: Accurately set up, routinely calibrate, and skillfully operate specialized technical inspection equipment, including Eddy current scopes, precision calipers, micrometers, and other specialized dimensional measurement instrumentation., • Technical Verification: Directly evaluate physical products and component outputs against official engineering prints, manufacturing blueprints, and schematics to confirm geometric and operational accuracy., • Visual & Functional Inspection: Execute formal visual, dimensional, and functional testing activities strictly tailored to standard operating procedures (SOPs) and product compliance logs., • Nonconformance & Data Logging: Identify, segregate, and thoroughly document any product nonconformances. Systematically log precise inspection and testing metrics inside organized Microsoft Excel spreadsheets according to the facility sampling plan. Qualifications: • High School Diploma, GED, or equivalent experience., • 2+ years aerospace manufacturing experience preferred., • Eddy Current and First Article Inspection (FAI) experience preferred., • Ability to read and interpret blueprints, engineering drawings, specifications, and work instructions., • Experience using precision measuring and inspection tools, including calipers and other metrology equipment., • Proficient in Microsoft Excel and Word for documentation, reporting, and data tracking., • Strong verbal and written communication skills with the ability to report quality issues and work collaboratively across departments., • Self-motivated, detail-oriented, and able to work independently while maintaining accuracy in a fast-paced production environment with a commitment to quality, safety, and continuous improvement. Physical Requirements: Ability to lift up to 50 lbs. when required. While performing duties, employees are regularly required to sit, stand, walk, twist, grasp, lift, and reach. Vision abilities require good close and distance vision, depth perception, with the ability to adjust focus.

Job Description Description: \tResponsibilities \tM13 Level B \t- Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments \t- Experience working with Quality Management System Policies and Procedures \t- Working knowledge of Company Policies, Procedures and Specifications \t- Overall working knowledge of production processes \t- Good communication skills written and verbal \t- Good computing skills \t- Maintain certifications as required \t- Follow Inspection (shop) procedures to accept or reject processes/parts/assemblies \t- Verify that tools are qualified \t- Prepare and maintain Quality records \t- Work across equivalent or lower-level Inspector job codes as required \tQualifications Required: \t- Prompt and on time daily \t- Ability to obtain all required training certifications and maintain certifications while on assignment \t- Must be available to work any shift- 1st, 2ndand 3rdshift operations \t- Available for periods of heavy overtime \t- 5 years' experience in aerospace airframe assembly inspection \t- Blueprint reading experience \t- MS Office and SAP experience \t- Experience writing NCRs (Tags) \tPreferred: \tSAP experience \t- Previous Client \t- Boeing 737 Airframe/Fuselage Experience \tInspector Testing Information: \tAll inspectors regardless of direct or contract must obtain their stamp within a certain amount of days after their training. That is discussed during the initial training classes. See the written and practical testing information below: \tHere is a list of the testing QA contractors are required to pass: \tAssy. Sealing (written and practical) \tPost Assy. Sealing (written and practical) \tElectrical Bond and Ground – All Meters (written) \tElectrical Bond Final Inspection (written and practical) \tPrecision Measuring Tools (written and practical) \tSkin Quality Inspection (written) \tIn addition, they have classes that are given to them that they are tested on and must pass: \tResearching and Creating an NCR in MES \tSolid Rivet Inspection \tBlind Fastener Inspection \tHex-Drive Bolt Inspection \tLockbolt Inspection \tBolt and Nut Inspection \tFastener Inspection on Composites

Job Description Description: \tM13 Level B \tUse and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments \tExperience working with Quality Management System Policies and Procedures \tWorking knowledge of Company Policies, Procedures and Specifications \tOverall working knowledge of production processes \tGood communication skills written and verbal \tGood computing skills \tMaintain certifications as required \tFollow Inspection (shop) procedures to accept or reject processes/parts/assemblies \tVerify that tools are qualified \tPrepare and maintain Quality records \tWork across equivalent or lower-level Inspector job codes as required \tQualifications Required: \tPrompt and on time daily \tAbility to obtain all required training certifications and maintain certifications while on assignment \tMust be available to work any shift- 1st, 2nd and 3rd shift operations \tAvailable for periods of heavy overtime \t5 years' experience in aerospace airframe assembly inspection \tBlueprint reading experience \tMS Office and SAP experience \tExperience writing NCRs (Tags) \tPreferred: \tSAP experience \tBoeing 737 Airframe/Fuselage Experience \tInspector Testing Information: \tAll inspectors regardless of direct or contract must obtain their stamp within a certain amount of days after their training. That is discussed during the initial training classes \tSee the written and practical testing information below: \tHere is a list of the testing QA contractors are required to pass: \tAssy. Sealing (written and practical) \tPost Assy. Sealing (written and practical) \tElectrical Bond and Ground – All Meters (written) \tElectrical Bond Final Inspection (written and practical) \tPrecision Measuring Tools (written and practical) \tSkin Quality Inspection (written) \tIn addition, they have classes that are given to them that they are tested on and must pass: \tResearching and Creating an NCR in MES \tSolid Rivet Inspection \tBlind Fastener Inspection \tHex-Drive Bolt Inspection \tLockbolt Inspection \tBolt and Nut Inspection \tFastener Inspection on Composites

Job Description Over 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We are currently seeking a Quality Inspector for a 1-year, full-time contract position within the aerospace industry. This role is based in Wichita, Kansas, a global hub for aircraft manufacturing and aerospace innovation. As a Quality Inspector, you will play a vital role in ensuring that aerospace components consistently meet rigorous standards for quality and safety. We are seeking motivated individuals who are eager to learn, grow, and advance within the industry. Once you join our team, you will be deployed through SQA’s operations center based on client needs and supplier production schedules, providing dynamic opportunities for professional development. Apply today for serious consideration! We are willing to train the right candidate! 3rd Shift (Full-Time) Key Responsibilities: • Perform visual inspections of aerospace products to verify compliance with work instructions and quality requirements, • Ensure adherence to safety protocols and quality standards at all times, • Identify quality concerns and communicate findings to appropriate teams, • Collaborate with production and quality personnel to support issue resolution, • Accurately document inspection results as requiredRequired Qualifications:, • Strong attention to detail and an eye for quality, • Commitment to safety and following established procedures, • Ability to work effectively in a team-oriented environment, • Flexibility to work overtime and support third shift, with the ability to assist first or second shift as needed, • Positive attitude, strong work ethic, and willingness to learn, • Ability to pass a background check, • ITAR compliance required Preferred Qualifications:, • Military experience (highly valued but not required), • Previous experience in industrial or manufacturing environments, • Familiarity with hand precision tools Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Must have Structures and Composite Repair experience \tPossess the skills/knowledge to perform in one or more of the following classifications: Systems/Payload Structures Mechanic Assembly Mechanic A Fuselage Assembly Mechanic A Underwing Composites Mechanic A Metals Mechanic A Process Mechanic A3. \tAbility to certify for Systems inspection function. \tAssist in training as applicable to job roles \tAbility to investigate and document Root Cause analysis and Corrective action (non-disciplinary) \tDetermine and submit test and investigation statements \tPerform process and hardware audits and surveillances Perform all functions associated with Level B requirements \tAll inspectors regardless of direct or contract must obtain their stamp within a certain amount of days after their training. That is discussed during the initial training classes \tSee the written and practical testing information below: \tHere is a list of the testing QA contractors are required to pass: \tAssy. Sealing (written and practical) \tPost Assy. Sealing (written and practical) \tElectrical Bond and Ground – All Meters (written) \tElectrical Bond Final Inspection (written and practical) \tPrecision Measuring Tools (written and practical) \tSkin Quality Inspection (written) \tIn addition, they have classes that are given to them that they are tested on and must pass: \tResearching and Creating an NCR in MES \tSolid Rivet Inspection \tBlind Fastener Inspection \tHex-Drive Bolt Inspection \tLockbolt Inspection \tBolt and Nut Inspection \tFastener Inspection on Composites \tSkills: \tComposite Fab & Composite Structure employees in 787 \tIt is not a rework project; they need help to get some issues resolved \tCleanroom work and some Structure work \t(Cleanroom is where they start process of doing the barrels) and structure work is after the cleanroom

Job Description Job Description: JOB SUMMARY • NDT processes parts, evaluates and interprets results, documents results, and performs equipment verification checks. PRIMARY DUTIES / RESPONSIBILITIES • Carry out the necessary preparation of parts before and after the inspection., • Evaluate and interpret parts for acceptance/rejection criteria., • Conduct system performance checks in accordance with applicable process standards., • Guide and supervise trainees and Level 1 personnel., • Stay current on the codes, standards, and contractual documents relating to the NDT processes performed at

Job Description Key Responsibilities • Use and interpret engineering drawings, inspection manuals, specifications, and shop mathematics, • Operate precision measuring instruments, specialized inspection machines, tools, and equipment required for inspection activities, • Follow Quality Management System (QMS) policies and procedures, • Apply knowledge of company policies, procedures, specifications, and production processes, • Follow inspection procedures to accept or reject processes, parts, and assemblies, • Verify that tools and equipment are properly qualified, • Prepare, maintain, and manage required quality and inspection records, • Maintain required certifications throughout the assignment, • Work across equivalent or lower-level Inspector job codes as required, • Communicate inspection findings effectively through written and verbal communication Required Qualifications • 5+ years of experience, • High School Diploma, • Required Training and Inspection Certifications for the Assignment Skills • Precision Measuring Instruments, • Specialized Inspection Machines and Equipment, • Microsoft Office, • SAP, • Production Processes Knowledge, • Boeing 737 Airframe/Fuselage Experience, • Aerospace Airframe Assembly Inspection, • Blueprint Reading and Interpretation, • Non-Conformance Report (NCR) Writing, • Quality Management System (QMS) Compliance, • Quality Inspection Records Management, • Written and Verbal Communication Schedule Start date: 2026-10-26 Next Steps Shortlisted candidates will receive an email from eximius.ai@compunnel.com with instructions to complete a required screening step. Completion of this screening is mandatory to be considered for the role.If you do not receive this email after applying, please contact our Talent Expert at gaurav.yadav1@compunnel.com. #ZRCOMP\nCompany Description Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice. We have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis. Compunnel Inc., established in 1994; is a leading provider of Staffing, IT/Software, e-Learning/Training, Business Intelligence, and Cloud Solutions. A leader in contingent and permanent workforce solutions, we also provide temp-to-hire staffing, project-based/SOW staffing, and payroll services to our esteemed clientele which includes Fortune 500 companies of diverse industry segments. Ranked as one of the largest staffing firms in the US which is our primary service market; we also have a significant presence in Europe and Asia. As a national service provider in the US, we are serving our customers all major states and regions; thereby generating numerous job opportunities for prospective employees in their preferred locations of choice.\r\n\r\nWe have witnessed multi-fold YOY growth, and continuously adding a large pool of talented resources to our employee base every year. Our extensive experience in hiring professionals of multiple in-demand skill sets (IT, Engineering, Healthcare, Admin-Clerical, Finance, Professional, Light Industrial, etc.) further makes Compunnel a wider and preferred platform for people to pursue their careers in the US. We welcome people from all walks of life and cultures, and we support workforce diversity by providing equal employment opportunities to people without any discrimination based on race, color, gender, religion, national/ethnic region, disability, or any other basis.

Job Description The Figeac Aero Group has multiple locations across the world and employs over 3,000 people. Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining. At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees. Job Title: Quality Inspector Shift: 2nd Shift; Monday to Friday 2:00pm - 10:30pm 3rd Shift; Monday-Friday, 10:00pm - 630am Pay Range: $19.00 - $24.00/hr, Depending upon experience Shift Differential: $0.75 per hour 2nd shift $1.00 per hour 3rd shift Experience: 3+ years of practical in-process and final inspection of complex machined parts, preferred but nor required. Willing to train exceptional candidate. Job Duties: • Perform visual and dimensional inspections on large aluminium machined parts. (<20+ feet), • Parts will be inspected to engineering drawings, industry standards, and specifications., • Read and interpret models (Catia), Drawings, and Parts lists, • Apply attention to detail to Drawings, Production Processes, Work Orders, etc, • Verifies completion of Quality documents and accurate representation of product flow throughout the process, • Use measuring tools such as calliper's, micrometre, height gage, and dial indicators as needed, • Create NCRs as needed if parts are non-conforming. Requirements: • High school diploma or equivalent, • 2 years of quality inspection experience in an aerospace manufacturing environment, preferred, • Experience with aerospace machining inspection, preferred, • Must possess excellent communication skills both written and oral., • Ability to work on a team as well as independently., • Must have strong organizational skills., • Must be dependable and have reliable transportation to work., • Must be proficient in MS Office applications., • Must be able to read, analyse, and interpret blueprints, and general procedures., • Must be able to interpret and understand OEM specifications, • Knowledge of measuring equipment (e.g. micrometres, callipers, height gages, Isoscope etc.), • Detail oriented, team player, and very organized with the ability to multi-task, • Comprehension of machining process, • Flexible schedule to work overtime and shift work as needed, • Flexible to assist other departments as needed. Working Conditions: • Some overtime may be necessary with or without notice, • The essential duties job may require the ability to stoop; to reach; to stand, and to walk for extended periods of time;, • to push and/or pull objects weighing up to 30 pounds;, • to lift and carry objects weighing up to 50 pounds;, • to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects;, • to perceive the attributes of objects by touch;, • to hear and verbally exchange ideas and information with the public, staff and others in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items., • Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and service requests., • Occasionally Lifting and carrying (with assistance) items weighing 75-150 lbs., • Must be able to wear safety PPE equipment, as required., • Noise levels may require hearing protection. Competitive Benefits: • Fantastic Medical, Dental & Vision Insurance with competitive rates, • Great Ancillary benefits such as individual and family YMCA memberships, • 16 days of vacation for newly hired employees, • Generous 401(k) plan that includes employer matching funds after 6 months of employment, • Life Insurance and disability coverage provided, • Employee Assistance Plan, • Teledoc, virtual doctor visits, • And more! Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description CMM Operator – Precision Manufacturing / Quality Inspection Employment Type: Direct Hire / Full Time Work type: Onsite Location: North Wichita Metro area, KS Shift: 2nd Shift (4:30 PM - 3:00 AM, Monday-Thursday) Pay rate: $25 - $35/per hour + $1 shift differential $4000 sign on bonus available **Position Overview ** Our client is seeking a CMM Operator to support precision manufacturing operations by ensuring the quality, accuracy, and integrity of dimensional inspection data. This position is responsible for operating Coordinate Measuring Machines (CMMs), executing established inspection programs, verifying manufactured components against engineering specifications, and documenting measurement results. The ideal candidate will have experience operating stationary or portable CMM equipment, interpreting engineering drawings, and using precision measurement instruments in a manufacturing environment. **Key Responsibilities ** CMM Operation & Dimensional Inspection Operate stationary and/or portable Coordinate Measuring Machines (CMMs) to inspect manufactured components and verify dimensional accuracy. Load, select, and execute established CMM programs to support production and quality inspection requirements. Review manufacturing plans, engineering drawings, and digital models to identify dimensions, tolerances, and inspection requirements. Select appropriate measuring probes, perform machine setups, and calibrate equipment to maintain measurement accuracy. Position, align, and secure components on measuring equipment while preventing damage to parts and machinery. Perform dimensional inspections according to established CMM programs and measurement sequences. Record, review, and compare inspection results against engineering specifications and tolerances. Conduct manual dimensional inspections using precision measuring instruments when additional verification is necessary. Identify, document, and report nonconforming conditions according to established quality procedures. Quality Assurance & Technical Support Support production operations by ensuring accurate and timely dimensional inspection results. Assist with troubleshooting CMM equipment, software, and inspection-related issues. Create inspection sketches using CAD software and/or CATIA as required. Perform applicable Level II Quality Assurance Inspector responsibilities when operational conditions require. Maintain accurate inspection records and supporting quality documentation. Report equipment malfunctions, software issues, or material concerns to the appropriate supervisor. Support continuous improvement initiatives focused on inspection accuracy, productivity, and manufacturing quality. Equipment Maintenance & General Responsibilities Perform routine maintenance and cleaning of CMM equipment, including surface plates and measuring components. Maintain a clean, organized, and safe work environment. Follow established company procedures, safety standards, and quality requirements. Use appropriate personal protective equipment when required. Participate in cross-training, cost-reduction initiatives, and team improvement activities. Coordinate with equipment vendors regarding new machinery and assist with equipment setup when needed. Communicate effectively with production personnel, quality inspectors, engineering teams, and supervisors. Perform additional duties and special projects as assigned. **Required Qualifications ** High school diploma or equivalent. Working knowledge of stationary and/or portable CMM equipment and associated software applications. Ability to interpret engineering drawings, dimensional specifications, and manufacturing documentation. Knowledge of precision measuring instruments and dimensional inspection techniques. Ability to apply mathematical principles to measurement and inspection activities. Familiarity with technical manuals, specifications, and computer-based inspection software. Ability to document inspection results accurately and identify dimensional discrepancies. Strong attention to detail, organizational skills, and the ability to work in a production manufacturing environment. **Preferred Qualifications ** Two or more years of experience operating stationary or portable CMM equipment. Two-year technical degree or completion of a recognized apprenticeship in a technical or manufacturing-related trade. Experience working with CAD software and/or CATIA. Experience inspecting precision-machined components or manufactured assemblies. Familiarity with quality inspection procedures and nonconformance documentation. **Physical Requirements & Work Environment ** Ability to sit, stand, bend, reach, stoop, crouch, and stretch for extended periods. Ability to lift up to 50 pounds without assistance and heavier objects with assistance. Ability to perform repetitive movements involving hands, wrists, and arms. Comfortable working in a manufacturing environment with machine noise, metal dust, and general shop conditions. Ability to follow established workplace safety requirements and use appropriate protective equipment. **Compensation & Benefits Highlights ** The organization offers a comprehensive compensation and benefits package designed to support employees professionally and personally. Benefits may include: Comprehensive medical, dental, and vision insurance options. Employer-supported 401(k) retirement savings program. Paid vacation, holidays, and other paid time-off benefits. Life insurance and disability coverage. Technical training, cross-training, and opportunities for professional development. Career advancement opportunities within quality assurance, metrology, and manufacturing operations. An established engineering and manufacturing environment emphasizing quality, teamwork, and continuous improvement. You should be proficient in: • GD&T, • Precision Measurement & Hand Metrology, • Advanced Inspection & Gauge Measurement, • Aerospace Manufacturing, • Manual Machining Skills Machines & technologies you'll use: • Coordinate Measuring Machine (CMM) (Faro, Hexagon), • CAD, • CMM Equipment, • CMM Maintenance, • CMM Operations, • CMM Setup, • FARO, • FARO ARM, • PC-DMIS, • Quality inspection, • Verisurf, • CATIA

Job DescriptionExperienced Structural Steel Fabrication Shop Quality Control (QC) Technician for CD&H Inc. in El Dorado, Kansas $25–$35 per hour (DOE) 100% Free Medical and Dental Insurance for the Employee / Vacation Available Within 90 Days of Employment / Paid Holidays Safety-Driven & Family-Oriented Company / Opportunity for Growth We understand the importance of your weekends being free for family and friends. Our typical working hours are Monday through Friday, 7:00 AM to 5:30 PM. General Job Description for: Experienced Structural Steel Fabrication Shop Quality Control (QC) Technician This is skilled quality control work involving the inspection, verification, and documentation of structural steel fabrication to ensure compliance with project specifications, applicable codes, and customer requirements. The Structural Steel Fabrication Shop QC Technician is responsible for inspecting fabricated steel components throughout the production process, identifying non-conforming work, maintaining quality records, and working closely with shop personnel to ensure the highest level of workmanship. Work is performed under the direction of the Shop Manager and is subject to review for quality, accuracy, and adherence to company safety standards. Job Duties and Tasks for: Experienced Structural Steel Fabrication Shop Quality Control (QC) Technician • Perform inspections of structural steel fabrication throughout all stages of production., • Verify fabricated components meet project drawings, specifications, and applicable industry standards., • Read and interpret structural drawings, fabrication details, blueprints, and weld symbols., • Inspect fit-up, dimensions, hole locations, weld preparations, and completed assemblies., • Conduct visual weld inspections and identify defects or non-conforming work., • Verify material identification, traceability, and proper documentation., • Maintain quality control records, inspection reports, and project documentation., • Coordinate with shop personnel to resolve quality issues and ensure corrective actions are completed., • Communicate with project managers, supervisors, customers, and third-party inspectors as needed., • Assist with customer inspections and audits., • Promote and maintain a safe, organized, and efficient work environment., • Perform related duties as assigned.Skills Needed for: Experienced Structural Steel Fabrication Shop Quality Control (QC) Technician, • Thorough knowledge of structural steel fabrication processes., • Knowledge of welding procedures, weld symbols, and visual weld inspection techniques., • Ability to read and interpret structural drawings, blueprints, fabrication details, and specifications., • Strong understanding of dimensional tolerances and measurement techniques., • Proficiency using measuring equipment including tape measures, calipers, squares, and other inspection tools., • Strong attention to detail with excellent organizational and documentation skills., • Ability to identify quality issues and communicate corrective actions effectively., • Ability to work independently while collaborating with fabrication and management teams., • Strong verbal and written communication skills., • Commitment to maintaining the highest standards of safety and quality.Knowledge, Experience, and Education Required for: Experienced Structural Steel Fabrication Shop Quality Control (QC) Technician, • Minimum of 3 years of experience in structural steel fabrication quality control or inspection preferred., • Experience inspecting structural steel fabrication, welding, and fabricated assemblies., • Familiarity with AWS welding standards and structural steel fabrication practices preferred., • Experience with AISC fabrication standards is a plus., • Ability to accurately read fabrication drawings and project specifications., • Strong computer skills for documentation and reporting preferred., • Valid driver's license preferred., • High School Diploma, GED, or equivalent work experience., • Ability to pass pre-employment screening requirements.About CD&H Inc. CD&H Inc. is a leading construction company based in Butler County, Kansas, specializing in commercial, industrial, and structural steel construction projects. With over 20 years of experience in the industry, we have built a reputation for excellence, quality craftsmanship, and customer satisfaction. Our team of experienced professionals delivers exceptional construction and fabrication services while maintaining the highest standards of safety, integrity, and workmanship. We take pride in building lasting relationships with our customers and providing an environment where employees can grow professionally and build rewarding careers. At CD&H Inc., we believe our people are our greatest asset. We are committed to fostering a safety-first, family-oriented workplace where hard work is recognized and opportunities for advancement are earned. Join CD&H Inc. and help us deliver quality craftsmanship that stands the test of time. #hc255943

Job Description Quality Inspector Purpose Communicates and resolves Quality related issues in a fast paced manufacturing environment by performing 1st part and final inspections as necessary. Supports the Quality and Manufacturing functions by educating employees on quality systems, quality metrics, and customer engineering. Follows the quality management system designated work instruction and procedures to ensure quality product is manufactured. Education and Experience • Minimum of 2 years of knowledge and experience in a Quality Assurance role with product acceptance authority, • Must possess experience using different precision measurement instruments Position Responsibilities • Provide training, learning and development where appropriate for all employees, • Partner with other departments to ensure the adherence to the Quality Management System and other compliance requirements., • Collaborates with operations, leaders, purchasing, customer service and others to efficiently meet customer demands., • Excellent verbal and written communication skills to interact and deal with internal customers., • Inspects and evaluates product for quality and defects., • Provide visibility to Production and Quality supervision of potential quality issues, as well as input on internal perceptions associated with Quality and Delivery performance., • Works with Production and Quality Assurance personnel to perform in process review and assure best practices are followed., • Performs other related duties, as required to ensure product conformity, internal and external customer demand, best practices and adherence to compliance requirements., • Completes AS9102 FAIs as required, • Ensures products manufactured meet all customer and internal requirements. Tasks • Has the capability to troubleshoot complex and questionable inspections by asking the right questions to get to the root cause of the problem., • Ability to work in a dynamic environment with multiple priorities and shifting time requirements., • Makes decisions based on customer/regulatory requirements., • Ability to effectively communicate in small and large group environments., • Confer with organizational team members at all levels to discuss issues, coordinate activities or resolve problems., • Act as liaison between organization and outside organizations., • Work closely with shop floor supervision and employees, • Perform 1st part, Oversight, and Final Inspections, • Complete detailed and accurate FAIs, • Ability to pass an eye exam

Job Description Are you ready to elevate your career and reach new heights? Join the elite team at Ōnin Aerospace as an Aviation Inspector. We are seeking an experienced professional with a keen eye for detail and strong quality inspection expertise to uphold the highest standards across critical aerospace programs. This is your opportunity to be part of a high-performing team with competitive pay and long-term career growth. Why Choose Ōnin Aerospace? • Award-Winning Culture: Recognized as an SIA Best Staffing Firm to Work For, • Career Growth: Opportunities to advance within the aerospace industry, • People-First Environment: Strong support, training, and development, • Competitive CompensationWhat You'll Do, • Interpret and work from engineering drawings, inspection manuals, and specifications, • Utilize precision measuring instruments, inspection tools, and specialized equipment, • Follow Quality Management System (QMS) policies and procedures, • Maintain working knowledge of company processes, policies, and production workflows, • Perform inspections to accept or reject parts, processes, and assemblies, • Verify tools and equipment are properly calibrated and qualified, • Prepare and maintain quality records and documentation, • Write and manage Non-Conformance Reports (NCRs), • Support multiple inspection areas and job codes as needed, • Maintain required certifications and training complianceQualifications, • 5+ years of aerospace airframe assembly inspection experience, • Strong blueprint reading and interpretation skills, • Experience with MS Office and SAP systems, • Proven experience writing NCRs (Non-Conformance Reports), • Strong written and verbal communication skills, • Solid understanding of production and inspection processes, • Dependable with strong attendance and punctualityWork Requirements, • Must be able to work 1st, 2nd, or 3rd shift, • Availability for overtime as needed, • Ability to obtain and maintain required certificationsTeammate Benefits Every assignment at Ōnin Aerospace includes our Teammate Benefits Program, designed to support your health, finances, and well-being. Benefits are available after just 30 days (auto-enrollment applies): • $5 Prescription Drugs, • $5 Doctor Visit Copays, • FREE Telehealth Services, • FREE Counseling Services, • Life Insurance Included, • Vision & Dental Insurance Included, • Vacation & Holiday Pay, • 401(k) Retirement Plan, • Scholarship Opportunities, • Rocket Lawyer Legal Services, • Unlimited Referral Program, • Ōperx Exclusive Discount ProgramReady to Take Off? Don't miss this opportunity to advance your career in the aerospace industry with a company that invests in your success.

Job Description Description: Duties: Responsibilities M13 Level B Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments Experience working with Quality Management System Policies and Procedures Working knowledge of Company Policies, Procedures and Specifications Overall working knowledge of production processes Good communication skills written and verbal Good computing skills Maintain certifications as required Follow Inspection (shop) procedures to accept or reject processes/parts/assemblies Verify that tools are qualified Prepare and maintain Quality records Work across equivalent or lower-level Inspector job codes as required Qualifications Required: Prompt and on time daily Ability to obtain all required training certifications and maintain certifications while on assignment Must be available to work any shift- 1st, 2nd and 3rd shift operations Available for periods of heavy overtime 5 years’ experience in aerospace airframe assembly inspection Blueprint reading experience MS Office and SAP experience Experience writing NCRs (Tags) Preferred: SAP experience 737 Airframe/Fuselage Experience Inspector Testing Information: All inspectors regardless of direct or contract must obtain their stamp within a certain amount of days after their training. That is discussed during the initial training classes. See the written and practical testing information below: Here is a list of the testing QA contractors are required to pass: Assy. Sealing (written and practical) Post Assy. Sealing (written and practical) Electrical Bond and Ground – All Meters (written) Electrical Bond Final Inspection (written and practical) Precision Measuring Tools (written and practical) Skin Quality Inspection (written) In addition, they have classes that are given to them that they are tested on and must pass: Researching and Creating an NCR in MES Solid Rivet Inspection Blind Fastener Inspection Hex-Drive Bolt Inspection Lockbolt Inspection Bolt and Nut Inspection Fastener Inspection on Composites \nCompany Description Systemart is in business for 25 years and recently awarded as Best Staffing Firm to work for in 2026. Systemart is in business for 25 years and recently awarded as Best Staffing Firm to work for in 2026.

Manheim Mobile Vehicle Condition Inspector\n \n \nCandidates may be hired at one of the following levels depending on experience, qualifications, and business need:\n \n Mobile Inspector - Level 1\n \n Hourly Pay Range: $15.10 - $18.89 - $22.69 per hour\n \n Mobile Inspector - Level 2\n \n Hourly Pay Range: $16.59 - $20.72 - $24.86 per hour\n \n Mobile Inspector - Senior Level\n \n Hourly Pay Range: $18.17 - $22.74 - $27.31 per hour\n \n \nAdditional Compensation:\n \n \n\n • Monthly performance incentive based on inspection volume. Inspectors who achieve target production levels can earn approximately $750 per month, while top performers can earn $1,000+ per month.\n\n\n, • Guaranteed incentive during the first three full months\n\n\n, • Month of Hire: Prorated guarantee up to $750\n\n\n, • First Full Month: Guaranteed $750\n\n\n, • Second Full Month: Guaranteed $500\n\n\n, • Third Full Month: Guaranteed $500\n\n\n, • Reimbursement provided for business use of a personal vehicle\n\n \n \nWe are currently accepting applicants at all levels. Please see the minimum requirements for each level of the role below.\n \n Job Description (Applies to All Levels)\n \n \nThe Mobile Inspector functions as a key member of the Manheim Mobile Inspections team, responsible for conducting on-site vehicle condition inspections for dealer clients within an assigned territory. This role provides accurate, detailed, and timely documentation of vehicle condition in accordance with Manheim inspection standards, supporting client trust, marketplace transparency, and inventory flow.\n \n \nMobile Inspectors build strong relationships with dealer clients by delivering consistent, high-quality inspections, acting as brand ambassadors for Cox Automotive, and actively engaging dealers to grow participation in Manheim's mobile inspection services.\n \n \nThis role requires the ability to work with minimal supervision while demonstrating increasing independence, sound judgment, and problem-solving skills.\n \n Primary Responsibilities & Essential Functions\n \n Vehicle Inspection & Documentation\n \n \nConduct thorough vehicle inspections in accordance with Manheim inspection standards.\n \n \nLocate, start, move, inspect, and return vehicles safely on dealer client lots.\n \n \nVerify vehicle identification, VINs, mileage, sub-series, and options; ensure accurate system entry.\n \n \nInspect and document vehicle exterior condition, including tires, frame, glass, panels, and mechanical components. Inspect and document interior condition, including seating, dashboard, and installed options.\n \n \nPerform basic mechanical checks across powertrain, drivetrain, and electrical components.\n \n \nIdentify and document damage, missing components, or inoperable features.\n \n Client Engagement & Territory Management\n \n \nBuild trust with dealer clients through consistent quality, professionalism, and responsiveness.\n \n \nEducate clients on the value of Manheim Marketplace and mobile inspection services.\n \n \nProactively engage with dealers to increase inspection volume and maintain active participation.\n \n \nLeverage data, insights, and partner input to maximize inspection efficiency and territory productivity.\n \n \nAdapt to changes in daily appointments and schedules to ensure effective dealer coverage.\n \n Reporting, Tools & Collaboration\n \n \nPrepare and submit daily activity and production reports.\n \n \nUtilize Salesforce.com for reporting, lead management, and customer performance tracking.\n \n \nCollaborate closely with Wholesale Specialists, peers, and other Manheim teams to support client success.\n \n \nWork effectively within a continuous improvement and Lean environment, contributing to process enhancement.\n \n Safety, Compliance & Standards\n \n \nMaintain production expectations as established by leadership.\n \n \nDemonstrate a visible commitment to safety by following all safety and health procedures.\n \n \nParticipate actively in Safety Excellence initiatives.\n \n \nComply with Manheim inspection standards, including the NAAA Frame/Structure Damage Policy.\n \n \nPerform other duties as assigned.\n \n Role-Specific Requirements\n \n Mobile Inspector - Level 1\n \n Summary\n \n \nEntry-level role responsible for conducting vehicle inspections under established processes while learning Manheim inspection standards, tools, and client engagement practices.\n \n Minimum Qualifications\n \n \nHigh School Diploma or GED required\n \n \nMinimal automotive knowledge preferred (body and mechanical)\n \n \n0-1 years of automotive-related experience preferred\n \n \nValid driver's license with a safe driving record required\n \n \nAbility to meet physical and mental demands of the role within required timeframes\n \n Key Responsibilities\n \n \nConduct basic vehicle inspections with accuracy and attention to detail\n \n \nSafely move and handle vehicles on dealer lots\n \n \nAccurately document vehicle condition and data in inspection systems\n \n \nDevelop working knowledge of inspection standards and client expectations\n \n Mobile Inspector - Level 2\n \n Summary\n \n \nIntermediate role responsible for independently managing assigned inspection activity, delivering high-quality inspections, and supporting growth within the assigned territory.\n \n Minimum Qualifications\n \n \nHigh School Diploma or GED plus 3+ years of experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED; or 5 years' experience in a related field.\n \n \n1-2 years of automotive-related experience preferred\n \n \nValid driver's license with a safe driving record required\n \n \nAbility to meet physical and mental demands of the role within required timeframes\n \n Key Responsibilities\n \n \nIndependently conduct detailed and complex vehicle inspections\n \n \nManage daily inspection schedules efficiently across dealer locations\n \n \nBuild strong working relationships with dealer clients\n \n \nUtilize data and insights to expand inspection volume and efficiency\n \n \nSupport continuous improvement initiatives and team collaboration\n \n Mobile Inspector - Senior Level\n \n Summary\n \n \nSenior role responsible for advanced vehicle inspections, mentoring peers, and serving as a trusted inspection professional within the assigned territory.\n \n Minimum Qualifications\n \n \nHigh School Diploma/GED plus 5 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED and 3 years' experience; or 7 years' experience in related field.\n \n \nPrevious vehicle inspection experience required\n \n \nStrong automotive knowledge (body and mechanical) required\n \n \n2-3 years of automotive-related experience strongly preferred\n \n \n1 year of service with Manheim Inspections recommended\n \n \nValid driver's license with a safe driving record required\n \n \nAbility to meet physical and mental demands of the role within required timeframes\n \n Key Responsibilities\n \n \nPerform advanced and high-complexity vehicle inspections\n \n \nServe as a subject matter resource for inspection standards and best practices\n \n \nSupport onboarding and development of less experienced Mobile Inspectors\n \n \nMaintain strong dealer relationships and inspection quality standards\n \n \nModel safety, professionalism, and operational excellence\n \n \nUSD 16.59 - 24.86 per hour\n \n Compensation:\n \n \nHourly pay rate is in the range of $16.59 - $24.86/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program.\n \n Benefits:\n \n \nEmployees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave.\n \n \nApplicants must currently be authorized to work in the United States for any employer without current or future sponsorship.\n \n \nEOE, including disability/vets

Job Description Who We Are This position is with Seneca Companies, an OWL Services Affiliated Company. OWL Services is the premier sales, installation, program management and service provider to retail, commercial, fleet, aviation and marine, and emergency power generation companies across the U.S. With 33 offices and distribution centers and more than 1,400 field service professionals, OWL delivers on a service platform that includes construction, compliance and testing, maintenance and repair, modernization and re-imaging, and EV charging solutions to keep businesses and people moving 24 hours a day, 7 days a week, 365 days a year. OWL Services’ companies have received numerous awards over the years for exemplary customer service. Most recently it was the recipient of EVgo’s Deployment Excellence Award in its first-ever class of awardees in the National EV Charging Recognition Program. Come join us! For more information visit OWLServices.com and follow us on LinkedIn. Title: Petroleum Systems Tester Job Summary: Perform several duties pertaining to fuel systems integrity testing. Primarily completes petroleum support work orders and jobs at retail, commercial and private fueling facilities. Shares results of testing and correction procedures with company partners and customers with speed and accuracy. Provide unbiased, fact-based results and correction advice on site to provide outstanding customer service. What You’ll Do: • 60%: Containment Testing: Performs a variety of fuel containment tests, equipment integrity tests, and leak-detection tests in order to detect leaks or to prevent future leaks due to non-compliance or equipment failure. Ensures all Seneca employees follow site and customer policies and procedures., • 15%: Site Inspection: Conducts inspections of equipment and sites referring to regulations, policies and customer requirements. Shares results of testing and correction procedures with company partners and customers with speed and accuracy. Provides unbiased, fact-based results and correction advice on site to provide outstanding customer service., • 10%: Training and field supervision: Provides direction, coaching and training to specialists, laborers and sub-contractors. Takes responsibility for all actions on a job site including safety., • 5%: Safety Management: Inspects, maintains and donns personal protective equipment. Ensures peers and subcontractors are protected and has the responsibility and authority to stop work deemed unsafe. Equipment inspection, maintenance and operation. Inspects equipment before and after operation and documents deficiencies in accordance with DOT regulations and company policy. May be assigned responsibility for a single company vehicle which includes responsibilities for routine maintenance and cleaning., • 5%: Mobile device-based administration and documentation: Utilizes mobile devices to plan, track and document job data including vehicle maintenance and operation, work order progress, personnel status and working hours. Responds to a variety of communication methods such as email, text messages, phone calls and application alerts in an appropriate time frame. Completes safety training and documentation on time., • 5%: Other duties as assigned., • Working Hazards: Works in an environment with potential exposure to fumes, dirt, noise, equipment movement dangers, confined spaces, vibrations, dangerous chemical/solvents, electrical shock, and inclement temperature extremes., • Physical/Mental Exertion: Ability to perform heavy physical labor exerting up to 100 pounds of force on an occasional basis and up to 50 pounds of force on a frequent basis performing such tasks as climbing, balancing, stooping, kneeling, crouching, crawling, reaching, standing, walking, pushing, pulling, lifting, and grasping. What We’re Looking For: • Education: Requires a high school diploma., • Experience: 4+ years of experience in the petroleum equipment field or in a related area., • Licenses/Certifications: HAZWOPER 40 certification and State-issued UST Inspector licenses required prior to hiring. CDL-B or A license with hazardous waste endorsement preferred. Manufacturer's certifications for Automated Tank Gauges, Submersible Turbine Pumps, Pressurized/Mechanical/Electronic line-leak detection preferred. Once hired, employees must maintain HAZWOPER40 and state-issued inspector's licenses., • Technical Abilities: Familiar with a variety of the field's concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Able to perform manual labor, heavy equipment inspection and operation and basic administrative tasks using mobile devices., • Autonomy/Direction: A wide degree of creativity and latitude is expected. Trains and directs the activities of junior Technicians and is required to make quick decisions in the field without management assistance. Must have the ability to travel overnight over 50%. Must have the ability to be on-call 24-7 for emergency response on a rotational basis., • Tools and Equipment: Ability to perform manual construction work and equipment operation as described. Knowledge and experience with computer programs (PowerApps, Outlook). Why Choose OWL Services? • Competitive Pay, • Per Diem & Company Vehicle with Fuel Card, • Health, Dental, and Vision Insurance with optional offerings of HSA and FSA, • Paid Time Off including Vacation Time, Sick Days, Personal Days, and Holidays, • 401k with Company Match, • Company Paid Life Insurance, • Free Employee Assistance Program (EAP) and Wellness Program This job description is intended to describe the general nature and level of work being performed by the person assigned to this position. Principal duties and responsibilities are intended to describe those functions that are essential to the performance of this job, and “other” duties and responsibilities include those that are considered incidental or secondary to the overall purpose of this job. This job description does not state or imply that the above are the only duties and responsibilities assigned to this position. Employees holding this position will be required to perform any other job-related duties as requested by management. All requirements are subject to possible modification to reasonably accommodate individuals with a disability. Requisition #4053

Job Description Quality Inspector - (2nd & 3rd Shift) Job Description The Figeac Aero Group has multiple locations across the world and employs over 3,000 people. Figeac Aero North America is a leading aerospace partner for detailed parts and sub-assemblies with specialization in saturation shot peening, shot peen forming, chemical processing, painting, assembly, non-destructive testing, and machining. At Figeac Aero North America, we place a high value on our employees. Employees are given the opportunity to be a part of something special while achieving their career goals. We offer competitive compensation in addition to an attractive benefits package for qualified employees. Job Title: Quality Inspector (2nd & 3rd Shift) Job Location: Wichita, KS, USA Shift: 2nd Shift; Monday-Friday, 2:00pm – 10:30pm 3rd Shift; Monday-Friday, 10:00pm - 630am Pay Range: $19.00 - $24.00/hr, Depending upon experience Shift Differential: $0.75 per hour 2nd shift $1.00 per hour 3rd shift. Experience: 3+ years of practical in-process and final inspection of complex machined parts, preferred but nor required. Willing to train exceptional candidate. Job Duties: • Perform visual and dimensional inspections on large aluminium machined parts. (<20+ feet), • Parts will be inspected to engineering drawings, industry standards, and specifications., • Read and interpret models (Catia), Drawings, and Parts lists, • Apply attention to detail to Drawings, Production Processes, Work Orders, etc, • Verifies completion of Quality documents and accurate representation of product flow throughout the process, • Use measuring tools such as calliper's, micrometer, height gage, and dial indicators as needed, • Create NCRs as needed if parts are non-conforming. Requirements: • High school diploma or equivalent, • 2 years of quality inspection experience in an aerospace manufacturing environment, preferred, • Experience with aerospace machining inspection, preferred, • Must possess excellent communication skills both written and oral., • Ability to work on a team as well as independently., • Must have strong organizational skills., • Must be dependable and have reliable transportation to work., • Must be proficient in MS Office applications., • Must be able to read, analyse, and interpret blueprints, and general procedures., • Must be able to interpret and understand OEM specifications, • Knowledge of measuring equipment (e.g. micrometers, callipers, height gages, Isoscope etc.), • Detail oriented, team player, and very organized with the ability to multi-task, • Comprehension of machining process, • Flexible schedule to work overtime and shift work as needed, • Flexible to assist other departments as needed. Working Conditions: • Some overtime may be necessary with or without notice, • The essential duties job may require the ability to stoop; to reach; to stand, and to walk for extended periods of time; to push and/or pull objects weighing up to 30 pounds; to lift and carry objects weighing up to 50 pounds; to use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects; to perceive the attributes of objects by touch; to hear and verbally exchange ideas and information with the public, staff and others in the office. Frequently being on foot, bending, stooping, squatting, kneeling, climb stairs and kneeling and/or crouch to retrieve files and other items. Requires manual dexterity sufficient to operate small power tools and other equipment. Writing to complete reports and service requests. Occasionally Lifting and carrying (with assistance) items weighing 75-150 lbs. Must be able to wear safety PPE equipment, as required. Noise levels may require hearing protection. Competitive Benefits: • Fantastic Medical, Dental & Vision Insurance with competitive rates, • Great Ancillary benefits such as individual and family YMCA memberships, • 16 days of vacation for newly hired employees, • Generous 401(k) plan that includes employer matching funds after 6 months of employment, • Life Insurance and disability coverage provided, • Employee Assistance Plan, • Teledoc, virtual doctor visits, • And more! Figeac Aero North America is an Equal Opportunity Employer. Figeac Aero North America provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionOur Mission Build quality into every airframe. Protect every passenger and crew. As an Aviation Structures Compliance Inspector in Wichita, you’ll be the quality gate that ensures aircraft components and systems meet stringent regulatory and internal standards. Role Snapshot • Inspect aircraft components, structures, and systems for conformance to safety, regulatory, and specification requirements., • Document results with rigor; maintain complete inspection and quality records., • Collaborate with maintenance to identify, communicate, and resolve discrepancies and non-conformances (including NCRs/Tags)., • Contribute to the development and continuous improvement of inspection procedures and protocols., • Keep current with industry regulations and best practices; share knowledge across the team., • Mentor junior inspectors and maintenance personnel when required., • Verify measurement tools and equipment are qualified prior to use., • Support work across equivalent or lower-level Inspector job codes as needed.What You Bring, • Fluent in drawings, specifications, and inspection manuals; confident with shop mathematics., • Proficient with precision measuring instruments and specialized inspection machines, tools, and equipment., • Experience operating within Quality Management System (QMS) policies and procedures., • Working knowledge of company policies, procedures, and specifications and of overall production processes., • Clear written and verbal communication; strong computing skills., • Ability to follow formal inspection procedures to accept or reject processes/parts/assemblies.Minimum Requirements, • Reliable, punctual attendance., • Ability to obtain and maintain required training and certifications during the assignment., • Available for any shift (1st, 2nd, or 3rd) and capable of supporting heavy overtime when required., • 5+ years of aerospace airframe assembly inspection experience., • Blueprint reading capability., • Experience writing NCRs (Tags)., • MS Office proficiency; exposure to CATIA V5 and SAP is helpful.Preferred Qualifications, • SAP experience., • Prior Spirit or Boeing experience., • Boeing 737 airframe/fuselage experience.Why This Role Matters Every acceptance or rejection decision you make directly affects airworthiness and delivery timelines. Your expertise elevates standards across Wichita operations and strengthens our culture of uncompromising quality.

Job DescriptionQuality Inspector – 4-Day Workweek! 4-Day Workweek + Great Benefits + 3-Day Weekends = A Job Worth Checking Out! Have an Eye for Detail? We Want YOU! Are you the person who notices when something is just a little off? Do you take pride in getting things right the first time? If so, Weckworth Manufacturing wants you on our Quality Team! We're looking for a dependable, detail-oriented Quality Inspector who enjoys working with their hands, solving problems, and making sure every product meets our high standards. At Weckworth, we manufacture quality industrial textile products, including products for military and commercial customers. Our Quality Inspectors play an important role in making sure everything we produce is something we can be proud of! And did we mention the 4-day workweek? Work Hard. Enjoy Your Long Weekends! Our Schedule: • Monday–Thursday: 6:30 AM – 5:00 PM, • Friday/Saturday: Occasional overtime as needed, • Saturday & Sunday: Enjoy your weekend!That's right! Enjoy a regular 4-day work week with more time for family, hobbies, and everything else you love. What You'll Be Doing As a Quality Inspector, you'll be one of the people making sure our products are built right and meet customer expectations. • Inspect materials and finished products to make sure they meet quality standards., • Perform first article, in-process, and final inspections., • Use measuring tools such as tape measures and calipers to verify accuracy., • Read and interpret blueprints and engineering specifications., • Catch problems before they become bigger problems!, • Work closely with Production and Engineering to resolve quality concerns., • Document inspection results and maintain accurate records., • Help keep our workplace clean, safe, and running smoothly. What Makes You a Great Fit? We're looking for someone who brings a positive attitude, a strong work ethic, and a sharp eye for detail. Here's what you'll need: • At least 1 year of Quality Inspection experience in a manufacturing environment., • High school diploma or GED., • Ability to read and interpret blueprints and use measuring tools (skills testing required)., • Strong attention to detail and a commitment to accuracy., • Basic computer skills, including Microsoft Office., • Good communication and problem-solving skills., • Ability to work independently and as part of a team., • Ability to stand for extended periods, bend, and lift up to 25 lbs., • Ability to keep up in a busy manufacturing environment.Bonus points if you're someone who takes pride in finding the little things others might miss! Pay: $17–$21 per hour Location: Haysville, Kansas Great Benefits? We've Got Those Too! We believe great employees deserve great benefits. At Weckworth, we offer: • 4-Day Workweek – Enjoy regular 3-day weekends!, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Life Insurance, • 401(k) Retirement Plan, • Paid Vacation, • Full-Time, Stable Employment, • A Great Team and Friendly Work Environment Small-Town Feel. Big Opportunities. We're located in Haysville, Kansas, a welcoming small community right next to Wichita. You get the convenience of being close to Wichita while working in a smaller community with a friendly atmosphere. At Weckworth Manufacturing, we take pride in our people, our craftsmanship, and the products we make. We're looking for team members who want to be part of something great! Ready to Put Your Eye for Quality to Work? If you're dependable, detail-oriented, and ready for a great opportunity with a 4-day workweek, we'd love to hear from you! Apply today and come see what makes Weckworth Manufacturing a great place to work! Competitive wage and benefit package. Weckworth Manufacturing, Inc. is a proud Equal Opportunity Employer. We provide equal opportunity to employees and applicants without regard to race, color, religion, gender, gender identity, sexual orientation, age, national origin, ancestry, disability, veteran status, or any other protected group covered by applicable federal, state, or local equal employment laws and regulations. Applicants with a disability that need any accommodation to complete the Weckworth Manufacturing, Inc. application process, or otherwise need assistance or accommodation in the recruiting process, should contact Human Resources at 316-425-2030. All applicants must submit a resume or apply in person at 128 Baughman Ave, Haysville, KS 67060 fax- 316.263.4492, HUMAN RESOURCES. Texting Privacy Policy and Information: Message type: Informational; you will receive text messages regarding your application and potentially regarding interview scheduling. Message frequency will vary depending on the application process. Msg & data rates may apply. OPT out at any time by texting “Stop”. Powered by JazzHR hNOJwGy6NU

Job Description The AOG Dispatcher is the single point of coordination for every MRT job, from the first customer call through the technician’s return. This role assigns the nearest qualified technician, assists with confirming that tooling is available and ready to ship before departure, keeps the customer informed, and ensures each work order is built accurately in our system. The Dispatcher works from our Wichita facility and is the operational link between Customers, AOG technicians, Customer Operations, Materials, and Quality Assurance Inspector. Key Responsibilities Dispatching • Receive AOG requests by phone and/or email, capture AOG Aircraft information such as location, discrepancies, and customer contact information., • Contact the nearest qualified, available technicians in accordance with the AOG dispatch rule., • Give technician’s the OK to dispatch after required work authorization forms are returned by customer., • Provide customers with technician’s ETA and contact information., • Open Work Order’s using information provided by customer on work authorization., • Record and report customer, work order number, technicians assigned, and location to AOG Manager, operations support specialist, parts, and QA after the work order is opened., • Become familiar with Yingling Aviation’s RSQM (Repair Station and Quality Manual) and Capabilities List along with revisions, always maintaining compliance to both., • Maintain the technician availability schedule. Document technicians’ status and locations they are in-work at on that schedule., • Coordinate use of MRT service vans and track van location and availability. (when applicable), • Manage itinerary changes, delays, and returns as jobs evolve in the field., • Escalate scope changes, delays, and customer concerns to the MRT Manager. Tooling and Parts • Assist technicians with required tooling and test equipment availability within the company internal departments., • Assist with coordination of getting required tooling and test equipment sent to job site., • Assist technicians with coordinating with Parts Department to source and ship parts to the job site and track shipments to delivery., • Log tooling and equipment shortfalls, that delay or prevent a job and report them to the AOG Manager., • Escalate scope changes, delays, and customer concerns to the AOG Manager., • Maintain dispatch logs and support reporting on response time, travel distance, dispatch-rule compliance, and job volume by customer to AOG Manager.Qualifications Required • High school diploma or equivalent., • Two or more years of experience in dispatch, scheduling, or operations coordination, preferably in aviation, field service, or logistics., • Working knowledge of aircraft maintenance terminology, or the ability to learn it quickly., • Proficiency with Microsoft Office and ERP or scheduling software., • Strong written and verbal communication, with sound judgment under time pressure., • Participate in a rotating after-hours and weekend on-call schedule. Preferred • Experience on an AOG desk or in a Part 145 repair station environment., • Familiarity with business aviation aircraft types (Citation, King Air, Learjet, Challenger, and similar)., • Experience with Corridor or a similar MRO ERP system., • A&P certificate. Work Environment/Physical Requirements, • This is an office-based role in our Wichita facility with regular hangar and ramp access., • Requires extended periods of computer and phone work, response to time-sensitive calls outside normal business hours while on call., • Occasional lifting of up to 25 pounds..Benefits, • Comprehensive benefits package, including health insurance, retirement plans and paid time off., • Investment in your training, including courses such as FlightSafety (FSI)., • Opportunities for professional growth and development, on a published pay ladder., • A dynamic, supportive team culture that values innovation and collaboration., • Shift differential where the department runs the shift: +$2.00/hr on 2nd shift, and +$3.00/hr on 7th shift, which works 36 hours and is paid for 40 — with the $3.00 on all 40 paid hours., • A $2,500 sign-on bonus for A&P mechanics and A&P leads.Apply online at Careers Open Positions — Yingling Aviation. If you’re passionate about aviation and have the skills and drive to excel in this role, we’d love to hear from you. Submit your resume to hr@yinglingaviation.com. Yingling Aviation is an Equal Opportunity Employer, including disability and protected veteran status. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. Yingling Aviation uses E-Verify.

Job DescriptionDescription: Company Summary: The International Code Council is the leading global source of model codes, standards, and building safety solutions. This includes product evaluation, accreditation, technology, training, and certification. ICC Codes, Standards, and solutions are used to ensure safe, affordable, and sustainable communities and buildings worldwide. While our roots are firmly planted in the development of the Codes and Standards, our growth allows us to offer many more services to support our Codes and Standards. Subsidiary Summary: NTA provides product testing, evaluation, and certification to ensure build-related products, systems, and materials are safe and compliant. This includes plan review, inspection, and HUD services Position Summary: We are seeking an entry level ICC Building Inspector in the Kansas region. We are also willing to train an entry level individual who is motivated and has a drive to learn new skills. Individuals must be motivated to take the necessary code tests and willing to work to become a seasoned ICC Building Inspector. This position requires frequent travel within the Colorado Inspections region. Essential Functions: • Perform regularly scheduled in plant audits as requested by the Regional Inspection Manager., • Perform on-site scheduled audits as requested by Regional Inspection Manager., • Perform product sampling as requested by Regional Inspection Manager, • Continually monitor the client’s implementation of approved quality systems., • Continually evaluate and communicate the status of each client’s quality system to the Regional Inspection Manager., • All inspection reports will be sent to the Regional Inspection Manager for review by the end of each month., • Establish excellent relationships with States and HUD to ensure we are respected as a leader and partner, • Ensure all applicable ICC NTA procedures are consistently followed in the execution of inspection jobs., • Continually identify, recommend, and pursue opportunities for process improvements within the Department and ICC NTA. Secondary Functions: • Promote effective communication throughout the organization. Identify opportunities and recommend actions that will enhance communication among all employees., • Contribute on an ongoing basis, insights and ideas for resolving repetitive issues as they arise in the field by establishing and maintaining a consistent line of communication with Inspection Managers., • Perform other duties, responsibilities, and special assignments as directed by the Regional Inspection Manager. Requirements: Essential Skills and Education/Experience: • Must pass ICC Residential examinations in Building, Electrical, Mechanical and Plumbing within 12 months of employment., • Must complete CEU training as required to maintain licenses and certifications., • Ability to physically travel to the client facility or worksite via airplane or by driving an automobile., • High School diploma or equivalent, • Two years’ experience working in building construction, building code enforcement or performing quality assurance audits., • Valid Driver’s License is required, • Some overnight travel is required Physical Requirements: • Ability to sit for extended periods while working at a computer or desk, • Occasional standing, walking, and reaching to access files or office supplies, • Manual dexterity for typing, filing, and handling office equipment, • Ability to lift and carry up to 20 pounds occasionally (e.g., office supplies, documents), • Visual acuity to read printed and digital materials, • Auditory ability to communicate effectively in person and over the phone, • May need to climb stairs in multi-level office building Environmental Conditions: • Indoor and Outdoor Environment, • Must be able to work in standard office environment with artificial lighting and climate control

Job Description For more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Source Inspector. The schedule is for the first shift, part-time, 20-25 hours a week, 2-3 days per week on an as-needed basis. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities • Perform precision inspection verifications on mechanical parts, components, assemblies, and materials, • Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings, • Perform surface plate inspection of the first article, in-process, and lot sample parts if required, • Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary, • Visual acuity and the ability to detect defects in highly complex products, • Verify documentation packages to industry/commodity-specific standards, • Classify defect types and verify rework conducted during the time of the inspectionRequired Qualifications, • 5+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges)., • Experience with certificates of conformance and inspection documentation., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products.Preferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience., • Certification in inspection techniques or GD&T is a plus. 50% hourly rate for any travel time ("p2p") Mileage reimbursement at the US gov't rate ($0.725 per mile driven). Untaxed. Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Our client is hiring a Pressure Equipment Compliance Inspector to support customers throughout region. Pressure Equipment Compliance Inspector (Trainee). Pressure Equipment Compliance Inspector (Trainee) Salary: $70,000$80,000 + Full Benefits + Company Vehicle Training provided to earn State Certifi

Cintas Corporation - - Responsibilities: Hang customer garments on hangers accurately; Visually inspect garments for repairs; Maintain cleanliness of work area; Meet production standards to earn incentive pay; Follow safety and attendance policies.

Position Overview The Sales Development Representative is responsible for overseeing the full lifecycle of the property inspection process, from recruiting and managing a nationwide network of independent inspectors to coordinating inspections and ensuring the timely delivery of inspection materials to our appraisal team. This position serves as the primary liaison between inspectors, clients, appraisers, and internal staff to ensure inspections are completed accurately, efficiently, and on schedule. Success in this role requires exceptional organizational skills, strong relationship management abilities, and the capacity to coordinate multiple projects simultaneously in a fast-paced environment. Key Responsibilities Inspector Network Development • Recruit, qualify, and expand a nationwide network of independent property inspectors to support current and future markets., • Source prospective inspectors through the ASC National Registry, industry databases, professional associations, and other recruiting channels., • Conduct proactive outreach via phone, email, text, and LinkedIn, • Communicate the benefits of partnering with our firm, including a consistent pipeline of assignments, administrative support, compensation commensurate with what they currently earn, and referral opportunities for residential appraisal work., • Maintain an active pipeline of prospective inspectors to support business growth. Inspection Coordination • Assign inspections to the most qualified inspector based on geographic proximity, experience, and availability., • Coordinate inspection scheduling with inspectors, property contacts, and clients, leveraging automated CRM processes to improve efficiency and communication., • Manage all inspection logistics, including access instructions, special requirements, scheduling changes, and client communications., • Resolve any day-of issues that arise with clients, sales people, inspectors, or even appraisers. Inspection Operations & Quality Assurance • Ensure the prompt and accurate transfer of inspection deliverables—including photographs, measurements, field notes, and supporting documentation—to the assigned appraiser., • Process inspector payments accurately and in a timely manner., • Maintain detailed records of inspections, inspector activity, and communications within the company's CRM and operational systems., • Collaborate with leadership to improve inspection processes, recruitment strategies, and operational efficiency., • Monitor key performance metrics and contribute to departmental goals related to inspection turnaround times, inspector network growth, and service quality. This position is well suited for a highly organized, relationship-driven professional who enjoys coordinating people and processes, solving operational challenges, and building partnerships. It offers an excellent opportunity to develop expertise in commercial real estate valuation while playing a vital role in delivering exceptional service to clients.

Rockwell, conductivity, weld,)Understands and follows hazardous waste disposal requirementsDemonstrates good communication and self-management skillsKnows how to input FAI data into FAI formsPerforms end of line activities including Certificate of ConformancesScans work orders from various departmen

Max-Aerostructures-LL is seeking an inspector to support general and core line inspections on daily first parts, in-process and final assemblies.

This role requires hands-on inspection experience and working knowledge of Nondestructive Testing (NDT) methods used in aviation MRO.

Document inspection results by completing reports and logs; summarizing re-work and waste; inputting data into quality database.

Perform scheduled, periodic, and special inspections of overhead cranes, hoists, monorails, jib cranes, and associated lifting equipment. The Crane Inspector is responsible for performing inspections, operational testing, and condition assessments of overhead cranes, hoists, lifting devices, and ass

Requires hand/finger dexterity; visual acuity; ability to lift/carry/push/pull heavy items; ability to stand for extended periods of time.

Job Description: Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignments Experience working with Quality Management System Policies and Procedure

This role requires hands‑on inspection experience and working knowledge of Nondestructive Testing (NDT) methods used in aviation MRO.

Communicates and resolves Quality related issues in a fast-paced manufacturing environment by performing 1st part and final inspections as necessary.Supports the Quality and Manufacturing functions by educating employees on quality systems, quality metrics, and customer engineering.Follows the quali

Inspectors are key personnel in the Accurus Quality Department and their duties are integral to our overall quality management system and customer satisfaction.Inspectors perform inspections on newly received goods, work-in-process, and are responsible for final inspections of machined aerospace par

Specialized Training:CMM operation and/or machine shop inspectionBlueprint reading and interpretationGD&T experienceNCR creationEach employee will be trained to perform Rockwell and Conductivity prior to physically beginning work in inspectionEach employee will be trained on FAI'sEach employee will

MAX AEROSTRUCTURES LLC is seeking an Aircraft Inspector to support general and structural assembly inspection on the core line at our Wichita, KS facility.You will inspect first parts, in-process, and final assemblies using drawings and specifications to ensure conformance and proper fit, form, and

LAUNCH IAB in Wichita, KS is seeking a Quality Inspector (MRO) to inspect aircraft and components in a Part 145 environment, ensuring compliance with FAA regulations and customer requirements.This hands-on role requires NDT knowledge and the ability to read engineering drawings.You will perform in-p

InspectorWeekend Day Shift: Friday, Saturday & Sunday 5:00am - 5:30pm Shift Differential for Weekend Shift: $4.Work 36 hours, paid for 40 hours!Inspectors are key personnel in the Accurus Quality Department and their duties are integral to our overall quality management system and customer satisfact

Global Superior Personnel in Wichita seeks an Aviation Structures Compliance Inspector to verify aircraft components, structures, and systems meet safety and regulatory standards.You will document results, communicate discrepancies, and support continuous improvement of inspection procedures.The rol

Job Description:Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment necessary to accomplish work assignmentsExperience working with Quality Management System Policies and Procedures5

Quality InspectorWeckworth Manufacturing, Inc. We have an immediate full-time job opening for a Quality Inspector with a 4-day work week schedule and OT on Friday/Saturday as needed. Qualifications:Minimum 1+ year continuous Quality Inspector position & experience in a manufacturing environment.

Build Quality Into Flight: Quality Inspector| $50/Hour | Wichita, KS PDS Tech Commercial is partnering with a leader in the aviation industry to hire an experienced Quality Inspector in Wichita, Kansas.If you have a strong aerospace inspection background, know airframe assembly inside and out, and t

Wichita, KS is seeking an Aerospace Inspector to verify product conformance to engineering drawings and specifications.Responsibilities include inspecting window frames, documenting quality tests, and flagging nonconforming parts.The role requires high school diploma, basic math, and ability to inte