Inspector jobs in Milwaukee, WisconsinCreate job alerts

Job Description Quality Technician Job Summary The Quality Technician is responsible for inspecting CNC-machined parts to ensure they meet customer specifications, engineering drawings, and quality standards. This position uses calibrated hand-measuring tools and inspection equipment to verify dimensions, identify defects, and document inspection results in a manufacturing environment. Key Responsibilities • Inspect CNC-machined parts using calibrated hand tools such as calipers, micrometers, height gauges, and gauges., • Read and interpret engineering drawings, specifications, and tolerances., • Perform first-piece, in-process, and final inspections., • Verify part dimensions and identify defects or nonconforming conditions., • Record inspection results accurately and maintain required quality documentation., • Ensure measuring and inspection equipment is properly calibrated and in good working condition., • Communicate quality issues with machinists, supervisors, and engineering personnel., • Assist with investigating the cause of dimensional or quality issues., • Maintain a clean, organized, and safe inspection area., • Follow company quality procedures and applicable manufacturing standards. Qualifications • High school diploma or equivalent., • Previous experience in manufacturing, machining, or quality inspection preferred., • Ability to use calibrated measuring tools accurately., • Ability to read and understand engineering drawings and dimensional tolerances., • Basic understanding of CNC-machined parts and manufacturing processes., • Strong attention to detail and accuracy., • Basic computer and documentation skills., • Ability to work independently and as part of a team. Physical Requirements • Ability to stand, walk, and work in a manufacturing environment for extended periods., • Ability to handle and inspect manufactured parts of varying sizes and weights., • Ability to visually inspect parts and read measurements accurately.

Job Description Responsibilities • Identify and resolve parts required for repair; review repair orders, work order, and Body Shop Managers estimate notes; follow warranty guidelines; notify supervisor of any repair add-ons., • Adjust, replace, and repair all series of truck and trailer equipment (e.g., sheet metal repairs, fiberglass/ panel repairs, fabrication and structural welding, installation and alignment of truck cab body components, electrical and mechanical repairs, etc.)., • Road test vehicles when necessary to ensure quality repair., • Maintain current knowledge of job and technical skills including truck manufacturer’s repair process., • Perform work as outlined on repair estimates with efficiency and accuracy in accordance with dealership and factory standards., • Teardown and inspect for additional or hidden repairs., • Advise body shop estimator of additional damage or supplemental needs or if repairs will not be completed on time., • Lead work of any apprentice technicians and maintain ASE certifications. Qualifications, • Welding, suspension, framework experience a plus OR willing to learn/train, • ASE Certifications; Damage Analysis and Estimating, Mechanical and Electrical Components, Non-Structural Analysis and Damage Repair and State Vehicle Inspector (preferred), • Certifications listed above or equivalent experience and eagerness to improve, • Valid driver's license and clean driving record We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description Position Summary We are seeking a detail-oriented Quality Inspector with experience operating Coordinate Measuring Machines (CMM) to inspect precision machined components. This role is responsible for performing first article, in-process, and final inspections to verify compliance with engineering drawings, GD&T requirements, customer specifications, and quality standards. The ideal candidate has experience inspecting tight-tolerance machined parts in a manufacturing environment and is proficient with both CMM equipment and traditional inspection tools. Key Responsibilities • Perform first article, in-process, and final inspections on precision machined components., • Program and/or operate CMM equipment to verify dimensional accuracy., • Interpret engineering drawings, blueprints, specifications, and GD&T requirements., • Use precision measuring instruments including micrometers, calipers, height gauges, bore gauges, thread gauges, and optical comparators., • Document inspection results and maintain accurate quality records., • Identify and document nonconforming products and support root cause investigations., • Work closely with manufacturing and engineering teams to resolve quality issues and improve processes., • Ensure compliance with AS9100, ISO 9001, customer specifications, and internal quality procedures., • Maintain calibration awareness and proper care of inspection equipment. Qualifications • High school diploma or equivalent; technical education is a plus., • 3+ years of quality inspection experience in a precision machining or manufacturing environment., • Hands-on experience operating CMM equipment (programming experience is a plus)., • Strong understanding of GD&T and ability to interpret engineering drawings., • Proficiency using precision measuring instruments., • Experience inspecting tight-tolerance machined components., • Knowledge of AS9100 and aerospace manufacturing standards is preferred., • Strong attention to detail, organizational skills, and ability to work independently.

Job Description Pinnacle Engineering Group is searching for an Inspector II who will be responsible for performing construction engineering and project delivery activities by performing advanced field inspections, monitoring contractor operations, and overseeing condition assessment and evaluation efforts for site development and transportation-related projects. The Inspector II supports project delivery through on-site construction observation, compliance monitoring, field testing, documentation of observations and measurements, and the preparation of reports, exhibits, calculations, and technical documentation using MS Office Suite, Bluebeam, or PDF editing software. This role also assists with the training of entry-level inspectors while ensuring construction activities comply with project specifications, engineering standards, safety requirements, and state, county and/or local municipality regulations. Duties and Responsibilities: The below statements are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing of all responsibilities, duties and/or skills required. Other duties may be assigned. • Perform field inspections of site development and transportation-related projects under supervision., • Assist construction engineers while overseeing the preparation of inspection, evaluation, and condition assessment reports., • Monitor daily construction activities to ensure they meet blueprint specifications, engineering standards, and safety codes., • Take the lead on performing advanced field inspections of site development and transportation-related projects., • Monitor contractor operations for adherence to state, county and/or local municipality standards., • Ensure compliance with applicable federal, state, local, and environmental regulations., • Document field observations, measurements, and photographs in accordance with governing agency and inspection standards., • Prepare report exhibits, sketches, calculations, and supporting documentation., • Support field testing, measurements, and reporting., • Monitor and record the work and progress of contractors, while tracking material quality and usage., • Maintain accurate project records and logs., • Assist with the hands-on training and development of entry-level inspectors., • Review shop drawings and material submittals for compliance to plans and specifications. Qualifications • 4 to 9 years of experience in transportation, infrastructure, roadway, utility, construction or related field., • Must possess a valid driver's license., • Proficient understanding of construction methods, materials, and inspection procedures., • Knowledge of highway design standards (e.g., AASHTO, MUTCD, DOT or local standards)., • Basic understanding of engineering and construction management tools (construction management software (e.g. ProCore), PDF editing software, scheduling software, etc.) (preferred), • Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field. (preferred)

Job Description Company: Top Roofing Company in Northern Illinois providing full-service roofing, construction, and restoration in the Chicagoland Area. Position: Roofing Inspector Trainee EARN $150K–$250K Responsibilities • Canvass neighborhoods to identify homes with potential roof damage, • Perform roof inspections — training provided, • Speak with homeowners about roofing solutions and insurance claims, • Present and sell roofing solutions, • Complete paperwork Requirements • Previous roofing sales experience is a plus, • Reliable transportation — car or truck required, • Comfortable working outdoors and speaking with homeowners, • Ability to safely climb a ladder for inspections APPLY NOW: Submit your updated resume and active contact number. Qualified candidates will be contacted to schedule an interview. #hc261830

Job DescriptionDescription: Quality Inspector (Fabrication & Welding)Join a Team That Takes Pride in Quality Craftsmanship Cutting Edge Fabrication is a leading metal fabrication company producing medium to large, complex weldments and fabricated assemblies for customers in transportation, defense, aerospace, construction equipment, and other demanding industries. For more than 30 years, we've built a reputation for quality, reliability, and tackling challenging projects. As we continue investing in our people, equipment, and capabilities, we're looking for skilled team members who want to help build the next chapter of our company's growth. Our priorities are simple: safety, quality, and on-time delivery. We believe those priorities help us take care of both our employees and our customers. If you're someone who takes pride in quality workmanship, enjoys solving technical challenges, and wants to help build a best-in-class fabrication operation, we'd like to talk with you. Position Summary Cutting Edge Fabrication is seeking a full-time Quality Inspector to support our fabrication, welding, machining, and final inspection processes. This position plays a critical role in ensuring our products meet customer specifications and industry standards. You will work closely with our fabrication, welding, machining, and engineering teams to verify quality throughout the manufacturing process—not just at final inspection. We're looking for someone with quality inspection experience or an experienced welder, fitter, machinist, or fabricator who has a strong understanding of print reading and quality requirements and is interested in building a career in quality. Responsibilities • Interpret engineering drawings, specifications, job routings, and customer requirements, • Perform inspections throughout the manufacturing process, including:, • Post fit-up, • Post weld, • Post machining, • Final inspection, • Inspect fabricated components and weldments to drawing and customer specifications, • Perform weld inspections in accordance with AWS and ASME requirements, • Verify dimensional accuracy using standard inspection equipment, • Document inspection results and maintain quality records, • Identify nonconforming product and communicate quality concerns to production and management, • Assist with root cause investigations and corrective actions, • Help maintain and continuously improve our quality management system, • Perform other quality-related duties as assignedRequirements: QualificationsRequired • Experience in quality inspection or metal fabrication, welding, machining, or manufacturing, • Ability to read and interpret blueprints and engineering drawings, • Working knowledge of GD&T, • Strong understanding of fabrication and welding processes, • Excellent math skills, including geometry and basic trigonometry, • Strong attention to detail and commitment to quality, • Good communication and teamwork skills, • Reliable attendance and strong work ethic, • Ability to lift up to 50 poundsPreferred, • Experience inspecting weldments to AWS D1.1 and/or ASME Section IX requirements, • Experience using precision measuring equipment including calipers, micrometers, height gauges, and other inspection tools, • Forklift and overhead crane experience, • Experience in a custom fabrication or job-shop environmentWhat We're Looking For, • Someone who takes pride in quality and craftsmanship, • A detail-oriented individual who enjoys solving technical problems, • A dependable teammate who communicates effectively with production personnel, • Someone who believes quality is built into the process—not inspected in at the end, • A professional who values safety, accountability, and continuous improvementCompensation & Benefits, • Competitive pay based on experience, • Health, dental, and vision insurance, • Paid time off and paid holidays, • Retirement benefits, • Opportunities for training, certification, and career growth, • Stable workload with a company committed to long-term success To learn more about our benefits, hiring process, and reasons to join our team, visit: www.cefabrication.com/careers Cutting Edge Fabrication is an Equal Opportunity Employer. We are committed to creating an inclusive workplace and prohibit discrimination and harassment of any kind. All employment decisions are based on qualifications, merit, business needs, and applicable law.

Job DescriptionDescription: Since 1913, Hooper has grown into a well-respected electric power and mechanical contractor, headquartered in Wisconsin with offices in Colorado, Florida, and Ohio. Serving commercial and residential clients, Hooper delivers expert services built on safety, outstanding craftsmanship, respectful collaboration, and community engagement. We foster a culture of collaboration, integrity, and growth. Joining Hooper means joining a century-strong legacy of excellence and people-first values. Hooper also provides competitive compensation and many supportive benefits including Health, Dental, and Vision Insurance, Matching 401(k) plan, Profit Sharing, Paid Time Off (PTO), 9 paid holidays, Identity Theft Protection, Life Insurance, as well as Short-Term and Long-Term Disability coverage. General Summary The QA/QC Technician will develop and maintain the company's Quality Assurance/Quality Control program for all mechanical construction projects. The ideal candidate will provide technical expertise to ensure that all work meets the highest quality standards, complies with relevant codes (ASME, IPC, UPC, NFPA, etc.), and exceeds client expectations. Principal Accountabilities Assists Quality Management & Implementation: • Develop and maintain the project-specific Quality Assurance/Quality Control plans and procedures in alignment with company policies and project requirements., • Attend preparatory, initial, and follow-up inspections for all phases of work., • Champion continuous improvement efforts, identifying trends in quality data and implementing corrective actions to address issues. Inspection & Testing: • Oversee regular site inspections and quality audits to verify workmanship and material compliance with approved drawings and specifications., • Ensure all testing and commissioning activities (e.g., pressure tests, leak tests, equipment startups, system balancing) are performed correctly and documented., • Coordinate the activities of third-party inspection and testing agencies, ensuring all necessary testing is performed and reports are accurate. Documentation & Compliance: • Maintain detailed QA/QC records, including inspection reports, test certificates, non-conformance reports (NCRs), and deficiency logs., • Manage non-conformance issues, track them to completion, and ensure timely implementation of approved corrective actions (root cause analysis)., • Prepare and provide high-quality reports on quality performance to management and clients. Collaboration & Communication: • Collaborate closely with project managers, superintendents, subcontractors, and clients to resolve quality-related issues and ensure project success., • Attend weekly QC meetings with the superintendent and project team, providing written reports on progress and reinforcing quality standards.Requirements:, • Education: High school graduate or completion of GED., • Experience: 2+ years of experience in construction quality control, with a strong background in mechanical systems (HVAC, plumbing, process piping)., • Certifications (Preferred): Current or previous certifications such as Certified Welding Inspector (CWI) or ASNT Level II or III in NDE methods (RT, UT, MT, PT, VT)., • Technical Knowledge (Preferred): Knowledge of applicable codes and standards (ASME, IPC, UPC, NFPA, AWS, SMACNA) and the ability to interpret design drawings and specifications., • Software Proficiency: Proficient in Microsoft Office Suite and construction management software (e.g., Procore, Bluebeam, ACC, etc.), • Soft Skills: Strong communication, analytical, problem-solving skills, and attention to detail. Description of Physical Working Environment • This role may require working on active construction sites in varying weather conditions, standing for long periods, climbing ladders, and occasionally lifting up to 50 lbs. Hooper is an equal opportunity/affirmative action employer. This company considers candidates regardless of age, color, creed, disability, gender identity, national origin, protected veteran status, race, religion, sex, sexual orientation, and any other status protected by applicable local, state, or federal law.

Job Description Title: Quality Inspector Location: Milwaukee, WI Hours: First Shift (~6:30AM - 3:00PM) Salary: $18.00/hr - $25.00/hr (Based On Experience) Job Summary: We are seeking a Quality Inspector for day-to-day inspection, documenting quality issues per our process and presenting data in a statistical format. Due to the nature of this position, a qualified candidate must be able to interpret Engineering Blueprints as every aspect of inspecting our product relies on the blueprints to ensure accuracy. The Steel Inspector will work under the supervision of the Quality Manager. Key Responsibilities & Duties: The position’s main responsibility is inspection and documentation of parts and assemblies. Once the data is collected, it will be turned into reports to develop training and/or process improvement strategies. Secondary tasks could fill up all or part of a business day at times. These tasks could vary greatly in day-to-day activities. Examples could include discussing issues with engineers, calling vendors, updating SOP's, or addressing anything that is out of the ordinary or with which there is an issue. Breakdown of daily activities is generally as follows: · 30% Part inspection (on manufacturing floor) · 50% Assembly inspection (on manufacturing floor) · 20% Processing and analysis of data · Candidates should be aware that the majority of time will be spent on the manufacturing floor. An individual in this position must be able to successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. The above list reflects the general details necessary to describe the principle and essential functions of the position and shall not be construed as the only duties that may be assigned for the position. Qualifications: · Prior experience with weld and paint inspection · Ability to follow directions is extremely important and then to follow through in a timely, accurate manner · Strong attention to detail is extremely important · Proficiency with MS Word and Excel (write reports in Word, create and use spreadsheets in Excel for analysis) · Basic math skills necessary to include fractions and decimals* · Strong ability in blueprint reading* · Ability to read and use a tape measure* · Possess mechanical ability/aptitude · Prior experience using Pareto Charts preferred · Prior experience in quality assurance preferred · Engineering Technician experience very helpful *there will be a pre-employment test to determine aptitude in these items. Benefits: · Mid-size, privately held organization · Outstanding job security · 40+ hours a week, 52 weeks a year (most employees work an average of 50 hours a week) · Continued growth · OT paid over 40 hours · Medical/Dental Benefits eligible after 60-days · Life Insurance Equal Opportunity Employer: We are proud to foster an inclusive and diverse workplace culture. We are an equal opportunity employer and are committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, or any other characteristic protected by applicable federal, state, or local law. We value diversity and believe that a diverse and inclusive workforce is essential to drive innovation, foster creativity, and achieve success. We welcome and encourage applications from individuals of all backgrounds and are dedicated to ensuring a fair and equitable recruitment and employment process for everyone. \nCompany Description Ontech Talent, is where innovation meets expertise in the dynamic realm of IT and Engineering recruiting and staffing. Founded by industry visionary Nicole Whitbeck Dohnal, Ontech Talent has emerged as the premier strategic partner for Fortune mid to large companies seeking unparalleled talent solutions. Ontech Talent, is where innovation meets expertise in the dynamic realm of IT and Engineering recruiting and staffing. Founded by industry visionary Nicole Whitbeck Dohnal, Ontech Talent has emerged as the premier strategic partner for Fortune mid to large companies seeking unparalleled talent solutions.

Job Description Industrial Inspection & Analysis is searching for an ANSI Inspector to join our Lifting Services team in the Midwest. Position Overview The ANSI Inspector will perform inspections on aerial lifts, bucket trucks, cranes and digger derricks. ANSI inspections ensure that they are in safe working order by conducting a review of the major components. Responsibilities Perform structural tests including: • Acoustic emission tests to assess the integrity of the fiberglass and steel structure, • Magnetic particle inspections to identify surface cracks on ferrous metals, • Torque test all critical fasteners, among others., • Dielectric testing to verify the electrical insulating strength in the FRP upper and lower booms, bucket, liners, FRP extensions on digger derricks, tool circuits, and upper control system. Qualifications • Mechanically inclined., • Basic knowledge of mechanical processes, movement, and assembly., • Basic knowledge of hand tools., • Proficient computer skills., • Strong communication skills., • Adequate visual acuity and perception to identify and distinguish light, color, depth, distance, and other elements pertaining to spatial resolution., • Must be able to work independently with some direction from management., • Problem solver, detail oriented. Job Requirements • Able to stand, sit, squat, climb, crawl and twist for extended periods of time., • Ability to lift up to 50 pounds., • Must be punctual, accountable, and provide high quality customer service., • Must be able to travel for an extended period of time and available to work varying shifts which may include weekends, overnights and holidays., • Must have valid driver’s license and be able to pass a background check and drug screen. Benefits • Medical (w/Mental Health coverage), Dental, Vision insurance, • Voluntary Short-Term Disability, Critical Illness, and Accident plans, • Employer-paid Life Insurance and Long-Term Disability, • Employee Assistance Program (EAP), • 401(k) Retirement Plan, • Paid Time Off and Holidays, • Monthly cell phone reimbursement About Us Industrial Inspection & Analysis®️ (IIA) is an emerging, high growth inspection, testing, and analytical business seeking to build a national platform to serve a breadth of industrial sectors and geographies. We pledge to provide Story-Worthy Service and Solutions, through even the most challenging situations. Making the World Safer is our mission at IIA. We are committed to operating in an environmentally and socially responsible manner and to helping our customers do so as well. Across every industry we serve, we offer inspection and engineering services that promote safety, efficiency and compliance with all applicable regulations. Industrial Inspection & Analysis provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state and local laws. IIA complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including, without limitation, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Job Title - Field/Project Quality Engineer Location - Milwaukee WI - 100% onsite Shift - 8am - 5pm CST Duration - 12+ Months Contract ( possibility to extend to convert to full time but it is not guaranteed) Pay Range - $45.00/hr. - $50.00/hr. on W2 Top 3 hard must have skills required for this role? Metal fabrication process, CWI, Building codes Candidates that are capable of working 8-10 hours in a manufacturing environment, can stand for long periods. It is important for the ideal candidate to have deep knowledge of metal fabrication and welding processes preferably in metal building or enclosure manufacturing. Candidate should have Certified Welding Inspector (CWI) certification and should be familiar with building codes such as UBC, IBC, ASCE, NEC. Job Description Summary Supports deployment of the Quality strategy through direct execution of project Quality activities at supplier, integrator, test, and customer-site locations. Develops and implements Project Quality Plans; performs structural, mechanical, electrical, and documentation inspections; coordinates FAT and IFAT activities; identifies nonconformances; and drives corrective-action and punch-list closure. Maintains complete project Quality records and provides objective evidence supporting shipment readiness and customer requirements. Core Responsibilities • Develop and execute Project Quality Plans, inspection plans, hold points, and witness-point activities for assigned projects., • Perform supplier, integrator, in-process, pre-IFAT, IFAT, pre-shipment, and site inspections as assigned., • Review current drawings, specifications, ITPs, travelers, material records, calibration records, and applicable supplier Quality documentation., • Verify structural and mechanical conformity, including dimensions, leveling, squareness, equipment installation, welding records, coating records, and traceability documentation., • Verify electrical integration against approved drawings and requirements, including grounding and bonding, conductor identification, terminations, clearances, cable routing, equipment labeling, and documented test results., • Coordinate NCR, SCAR, punch-list, containment, corrective-action, and closure-evidence activities., • Confirm required checklists, signatures, test records, redlines, and shipment-readiness documentation are complete., • Provide clear Quality reporting to PMO, Engineering, suppliers, customers, and Quality leadership., • Comply with applicable HSE controls, electrical safe-work requirements, PPE, LOTO, testing boundaries, and Client procedures., • Capture lessons learned and support prevention of recurring project and supplier issues. Qualifications / Requirements • Bachelor degree in engineering, quality, manufacturing, or a related technical discipline, or equivalent technical education and relevant experience., • 3-5 years, Relevant experience with low- and medium-voltage electrical distribution equipment, eHouses/PDCs, industrial fabrication, integration, manufacturing Quality, or field Quality., • Ability to read and interpret single-line diagrams, general arrangements, schematics, wiring diagrams, equipment drawings, weld documentation, and inspection/test records., • Working knowledge of structured problem solving, NCR/SCAR processes, corrective action, and objective evidence., • Effective written and verbal communication with suppliers, customers, Engineering, PMO, and field teams. Preferred Qualifications • Experience with FAT/IFAT execution, electrical distribution equipment, supplier Quality, or integrated eHouse/PDC projects., • Knowledge of NEC, OSHA electrical safety expectations, AWS structural welding documentation, coating inspection, and calibration control., • ASQ CQE, supplier Quality, welding inspection, coating inspection, or electrical testing credentials appropriate to assigned scope. Interview process- 1:1 virtual interview with hiring manager. 2nd round on-site panel interview. Interviews will be held on Tuesdays and Wednesdays \nCompany Description Founded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances. At Kyyba, the overall well-being of our employees and their families is important to us. We are proud of our work culture which embodies our core values; incorporating value, passion, excellence, empowerment, and happiness, creates a vibrant and productive atmosphere. We empower our employees with the resources, incentives, and flexibility that they need to support a healthy, balanced, and fulfilling career by providing many valuable benefits and a balanced compensation structure combined with career development. Kyyba is an Equal Opportunity Employer. Kyyba does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other b Founded in 1998 and headquartered in Farmington Hills, MI, Kyyba has a global presence delivering high-quality resources and top-notch recruiting services, enabling businesses to effectively respond to organizational changes and technological advances.\r\n\r\nAt Kyyba, the overall well-being of our employees and their families is important to us. We are proud of our work culture which embodies our core values; incorporating value, passion, excellence, empowerment, and happiness, creates a vibrant and productive atmosphere. We empower our employees with the resources, incentives, and flexibility that they need to support a healthy, balanced, and fulfilling career by providing many valuable benefits and a balanced compensation structure combined with career development.\r\n\r\nKyyba is an Equal Opportunity Employer.\r\n\r\nKyyba does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other b

Job Description Pinnacle Engineering Group is searching for an Inspector III who will be responsible for performing construction engineering and project delivery activities by performing advanced field inspections, monitoring contractor operations, and overseeing condition assessment and evaluation efforts for site development and transportation-related projects. The Inspector III supports project delivery through on-site construction observation, compliance monitoring, field testing, documentation of observations and measurements, and the preparation of reports, exhibits, calculations, and technical documentation using MS Office Suite, Bluebeam, or PDF editing software. This role also assists with the training and development of entry-level inspectors while ensuring construction activities comply with project specifications, engineering standards, safety requirements, and state, county and/or local municipality regulations. Duties and Responsibilities: The below statements are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing of all responsibilities, duties and/or skills required. Other duties may be assigned. • Perform field inspections of site development and transportation-related projects under supervision., • Assist construction engineers while overseeing the preparation of inspection, evaluation, and condition assessment reports., • Monitor daily construction activities to ensure they meet blueprint specifications, engineering standards, and safety codes., • Take the lead on performing advanced field inspections of site development and transportation-related projects., • Monitor contractor operations for adherence to state, county and/or local municipality standards., • Ensure compliance with applicable federal, state, local, and environmental regulations., • Document field observations, measurements, and photographs in accordance with governing agency and inspection standards., • Prepare report exhibits, sketches, calculations, and supporting documentation., • Support field testing, measurements, and reporting., • Monitor and record the work and progress of contractors, while tracking material quality and usage., • Maintain accurate project records and logs., • Assist with the hands-on training and development of entry-level inspectors., • Monitor the progress of entry-level inspectors and provide feedback as necessary., • Review shop drawings and material submittals for compliance to plans and specifications. Qualifications • 5 to 10+ years of experience in transportation, infrastructure, roadway, utility, construction or related field., • Must possess a valid driver's license., • Proficient understanding of construction methods, materials, and inspection procedures., • Knowledge of highway design standards (e.g., AASHTO, MUTCD, DOT or local standards)., • Basic understanding of engineering and construction management tools (construction management software (e.g. ProCore), PDF editing software, scheduling software, etc.), • Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field. (preferred)

Job Description SUMMARY/OBJECTIVE Provides day-to-day on-site assistance to the Superintendent and Project Manager; working collectively towards the successful completion of projects in accordance with established goals regarding quality, safety, efficiency and schedule. Serves as an onsite point of contact for the Project Manager, Superintendent, Subcontractors and Owner/Owner’s Representative. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Review project plans and proposals., • Develop, maintain and enforce project site logistics plans., • Assist with creating a project schedule, and short-term look ahead schedules. Identify milestones and project critical path. Makes revisions and updates as needed., • Maintain construction documents onsite, ensuring all plan revisions are incorporated to create an accurate as-built set., • Assist Supt in monitoring subcontractor work to ensure efficiency. Provide regular updates and feedback on project progress as needed., • Complete routine agendas, minutes and follow up reports for Subcontractor and Owner’s meetings., • Lead site walk-throughs for Owner, Architect, Inspector or other site visitors., • Assist in the resolution of disputes with Owners, Subcontractors and Suppliers., • Communicate with PM/Supt regarding jobsite issues or concerns., • Review for accuracy, including but not limited to: RFI’s, shop drawings, submittals, samples, time sheets, punch lists, and delivery tickets., • Assist with the management of project costs: input labor and material costs into specified cost codes, estimate potential change orders, and report on current cost code status when directed., • Adhere to the safety and quality program for each project. Assist Superintendent with managing the site-specific safety plan., • Maintain and enforce construction site cleanliness for a safe workplace., • Coordinate the purchase of materials as needed for the job site., • Ensure all permits and inspections are complete. BASIC REQUIREMENTS • Bachelor’s Degree in construction management or related field. Or, an equivalent combination of education, training and work experience., • 2-3 Years construction related work or internship experience preferred. ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES • Solid project scheduling and follow through skills. Experience utilizing Microsoft Project is a plus., • Must be able to read drawings, interpret codes, and be familiar with all phases of building design., • Experience with Bluebeam, Procore and/or BIM is a plus., • Ability to travel to project work sites., • Valid driver’s license with clean driving record.

Job DescriptionDescription: Since 1913, Hooper has grown into a well-respected electric power and mechanical contractor, headquartered in Wisconsin with offices in Colorado, Florida, and Ohio. Serving commercial and residential clients, Hooper delivers expert services built on safety, outstanding craftsmanship, respectful collaboration, and community engagement. We foster a culture of collaboration, integrity, and growth. Joining Hooper means joining a century-strong legacy of excellence and people-first values. Hooper also provides competitive compensation and many supportive benefits including Health, Dental, and Vision Insurance, Matching 401(k) plan, Profit Sharing, Paid Time Off (PTO), 9 paid holidays, Identity Theft Protection, Life Insurance, as well as Short-Term and Long-Term Disability coverage. General Summary The QA/QC Manager will develop, implement, and maintain the company's Quality Assurance/Quality Control program for all mechanical construction projects. The ideal candidate will provide technical expertise and leadership to ensure that all work meets the highest quality standards, complies with relevant codes (ASME, IPC, UPC, NFPA, etc.), and exceeds client expectations. Principal Accountabilities Assists Quality Management & Implementation: • Develop, implement, and maintain the project-specific Quality Assurance/Quality Control plans and procedures in alignment with company policies and project requirements., • Lead preparatory, initial, and follow-up inspections for all phases of work., • Manage and support on-site quality teams, providing direction and mentorship to QA/QC personnel., • Champion continuous improvement efforts, identifying trends in quality data and implementing corrective actions to address issues. Inspection & Testing: • Oversee regular site inspections and quality audits to verify workmanship and material compliance with approved drawings and specifications., • Ensure all testing and commissioning activities (e.g., pressure tests, leak tests, equipment startups, system balancing) are performed correctly and documented., • Coordinate the activities of third-party inspection and testing agencies, ensuring all necessary testing is performed and reports are accurate. Documentation & Compliance: • Maintain detailed QA/QC records, including inspection reports, test certificates, non-conformance reports (NCRs), and deficiency logs., • Manage non-conformance issues, track them to completion, and ensure timely implementation of approved corrective actions (root cause analysis)., • Prepare and provide high-quality reports on quality performance to management and clients. Collaboration & Communication: • Collaborate closely with project managers, superintendents, subcontractors, and clients to resolve quality-related issues and ensure project success., • Lead weekly QC meetings with the superintendent and project team, providing written reports on progress and reinforcing quality standards.Requirements:, • Education: Bachelor's degree in Mechanical Engineering, Construction Management, or a related field, or equivalent relevant work experience., • Experience: 5-10+ years of progressive experience in construction quality management, with a strong background in mechanical systems (HVAC, plumbing, process piping)., • Certifications (Preferred): Current or previous certifications such as Certified Welding Inspector (CWI) or ASNT Level II or III in NDE methods (RT, UT, MT, PT, VT)., • Technical Knowledge (Preferred): Advanced knowledge of applicable codes and standards (ASME, IPC, UPC, NFPA, AWS, SMACNA) and the ability to interpret design drawings and specifications., • Software Proficiency: Proficient in Microsoft Office Suite and construction management software (e.g., Procore, Bluebeam, ACC, etc.), • Soft Skills: Strong leadership, communication, analytical, problem-solving skills, and attention to detail. Description of Physical Working Environment • This role may require working on active construction sites in varying weather conditions, standing for long periods, climbing ladders, and occasionally lifting up to 50 lbs. Hooper is an equal opportunity/affirmative action employer. This company considers candidates regardless of age, color, creed, disability, gender identity, national origin, protected veteran status, race, religion, sex, sexual orientation, and any other status protected by applicable local, state, or federal law.

Job Description Dixon Engineering is hiring Field Technicians-Inspectors to join our team! This entry-level role is perfect for candidates with some construction experience who are eager to learn and grow in the coating and engineering industry. What You’ll Do: Conduct coating inspections on construction projects. Complete field inspection reports. Assist with on-site testing using specialized equipment. Work with a supportive engineering team. What We’re Looking For: Entry-level with some construction experience. Ability to work at heights and in various outdoor conditions. Valid driver’s license and good driving record. Strong attention to detail and a safety-conscious mindset. Why Dixon Engineering? Hands-on training and career advancement opportunities. Competitive pay and benefits. Supportive, team-oriented work environment. Benefits: Health Insurance (Medical, Dental, Vision). Life Insurance and Disability Coverage. 401(k) Plan with company match. Paid Time Off (PTO) and Holidays. Company vehicle, phone, and travel perks. Education & Experience: High School Diploma required. Some college or construction-related experience is a plus. Ready to start your career with Dixon Engineering? Apply today! Compensation: $22 - $34 hourly Responsibilities: • Oversee coating and construction work to ensure it meets project specifications., • Use testing tools to inspect the project at different stages., • Approve quality work, document issues, and write daily inspection reports., • Keep accurate records, including photos, for inspections., • Enforce safety practices to maintain a secure job site. Qualifications: • Valid driver’s license with a good driving record., • High school diploma required; some college or technical education in construction-related fields is a plus., • Able to pass a physical and work safely at heights., • Ability to work independently or with a team., • Experience performing quality work in construction., • Strong communication and documentation skills., • Basic computer skills for reporting., • Positive attitude and strong work ethic., • Ability to handle conflicts professionally on the job., • Organized, punctual, and good time management., • Demonstrated commitment to safety on job sites., • Able to pass a background check. About Company Dixon Engineering Inc. is a consulting firm that provides engineering and inspection services to the coating industry. https://www.dixonengineering.net

Job Description Position Title: Structural Engineer Location: Milwaukee, Wisconsin, United States Department: Structural Description: H&H is offering an exciting opportunity for a Structural Engineer to join our growing team in our Milwaukee, WI office. We currently have numerous design and inspection assignments for transportation infrastructure related projects within the region. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you'll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Develop contract plans, special provisions, and engineer's estimates, • Perform structural design calculations (beam design, reinforced concrete and steel structures design and analysis), sketches, computer modeling, and similar technical work as required, • Perform load ratings on bridges and other structures, • Adhere to quality control and quality assurance procedures, • Effectively communicate and coordinate with other members of the design team, • Assist with field inspections and condition assessments of bridges and other structures, • Research design options and codes and discuss with the project manager Requirements: • Bachelor's degree required, Master's preferred, in Civil or Structural Engineering, • 3 to 8 years of relevant experience, • Wisconsin PE license, • Experience with analytical software such as SAP, CSI Bridge, LARSA 4D, MIDAS Civil, AASHTOWare Brr, etc., • Experience with CAD software such as MicroStation or AutoCAD, • Excellent written and verbal communication skills, • A highly motivated and responsible individual with a strong work ethic, • Familiarity with inspection, design and construction of bridges or other structures, • WisDOT-certified bridge inspector preferred, • Experience with WisDOT design procedures Benefits: We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS PI88b23bf27ccd-25405-38926850

Job Description H&H is offering an exciting opportunity for a Structural Engineer to join our growing team in our Milwaukee, WI office. We currently have numerous design and inspection assignments for transportation infrastructure related projects within the region. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you’ll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Develop contract plans, special provisions, and engineer’s estimates, • Perform structural design calculations (beam design, reinforced concrete and steel structures design and analysis), sketches, computer modeling, and similar technical work as required, • Perform load ratings on bridges and other structures, • Adhere to quality control and quality assurance procedures, • Effectively communicate and coordinate with other members of the design team, • Assist with field inspections and condition assessments of bridges and other structures, • Research design options and codes and discuss with the project manager Requirements • Bachelor's degree required, Master's preferred, in Civil or Structural Engineering, • 3 to 8 years of relevant experience, • Wisconsin PE license, • Experience with analytical software such as SAP, CSI Bridge, LARSA 4D, MIDAS Civil, AASHTOWare Brr, etc., • Experience with CAD software such as MicroStation or AutoCAD, • Excellent written and verbal communication skills, • A highly motivated and responsible individual with a strong work ethic, • Familiarity with inspection, design and construction of bridges or other structures, • WisDOT-certified bridge inspector preferred, • Experience with WisDOT design procedures Benefits We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. We’re excited to share that the Electrical & Electronics (E&E) business of Eurofins is now part of UL Solutions. E&E has built a strong reputation for technical expertise, quality, and trusted service across the electrical and electronics industry. Combining the teams, capabilities, and shared commitment to safety and innovation presents an exciting opportunity to strengthen E&E services and support customers around the world. This role offers a unique opportunity to join the business during an exciting period of growth and transition. Job Description Electrical Factory Inspector (Remote/Travel) responsibilities include, but are not limited to, the following: • Support department objectives and company goals, • Be a team player, • Sustain a positive, enthusiastic and professional attitude at all times, • Accommodate requests with a smile and “let me see what I can do” attitude, • Adhere to manager directives, • Maintain a professional appearance and demeanor, • Arrive on time, properly dressed and prepared to work, • Perform all duties in a timely, accurate, honest and professional manner, • Communicate with customers professionally and in accordance with customer service standards, • Be respectful to others Primary Tasks/Responsibilities: • Surveillance inspections of factories to assure products remain in compliance with conditions of granted certification., • Follow-up with factories to bring certification back in compliance if a non-approved variance is found, • Other duties assigned by management.Qualifications Basic Minimum Education Qualifications: • Two-year college degree or four-year college degree related to STEM Basic Minimum Qualifications: • Knowledge of electronics, • Certification in Electronics, ideal but not required, • Willing to travel - This position requires 90% - 100% travel, • Able to rent a car, • Willing to work overtime and remote, • Cannot be on any no fly list, • Clean driver record, • Have a passport or be able to get a passport, • US Resident, • Authorization to work in the United States indefinitely without restriction or sponsorship. The Ideal Candidates Possesses the Following: • Ability to maintain confidentially, • Needs to be receptive to and accepting guidance from others, • Ability to deal with difficult people and problems, • Able to work well in a team environment, • Able to work in a diverse group of people, • Attention to detail, • Ability to multi-task and prioritize assignments, • Professional appearance, • Able to make own schedule and be self-sufficient Physical Qualifications: • Able to sit or stand for long periods of time, • Able to lift up to 30 pounds Additional Information Position is full-time travel & hybrid, working Monday - Friday 8:00 am to 5:00 pm, with overtime as needed. • Compensation: $50,000 - $70,000, • Excellent full-time benefits including comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA Consumer Product Testing is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description Summary Under the direction of the Quality Assurance Manager, the Quality Inspector is responsible for performing inspections on manufactured products during all stages of production and completes final inspections before shipment. The Quality Control Inspector may also inspect incoming materials for accuracy and defects. This position will ensure that products meet engineering standards and customer quality expectations. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. • Inspect products at various stages of production to ensure all shop floor quality checks are complete, • Input information into the QC software, • Ensure all in-process inspection documentation is signed and in order, • Discuss quality issues with the production leads and supervisors to resolve issues timely, • Participates in root cause analysis, • Prepares and analyzes incident reports, • Participates in quality related training programs, • Prepare vendor audit paperwork, • Prepare internal audits, • Work schedule may cross shifts to ensure common practice, • Inter-plant travel for knowledge sharing and coverage, • Travel to vendors and company facilities to perform in process inspections Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Minimum of 3 years’ experience in steel fabrication or relevant industry, • Minimum of 1 year experience in a quality role, • Previous experience in an ISO quality system, • Understanding of quality systems and processes, to include root cause analysis, • Ability to identify process issues and offer solutions, • Ability to identify manufacturing issues and offer solutions, • Knowledge of ASNT – SC1/ASQ inspection processes preferred, • Must be committed to quality, • Ability to work in a cross-function team environment Education High school degree or equivalent is required; post high school education or a technical degree or certificate is preferred Other Skills: • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent, • Excellent customer service skills which include maintaining a good attitude, taking ownership of meeting customer needs, going the “extra mile” for customers, demonstrating a commitment to sharpening skills through education and training, using positive communication, and looking for opportunities to respect customers’ time and schedules, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Language Skills Ability to read and interpret documents such as safety rules, production schedules, maintenance instructions, and procedure manuals. Ability to communicate effectively with other employees of the organization. Bilingual English/Spanish helpful, but not required. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, and talk or hear. The employee is occasionally required to sit and use hands to finger, handle, or touch objects, tools, or controls. The employee must occasionally lift and/or move up to 50 pounds, carrying and moving parts, materials, and product. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. “Steele Solutions is an Equal Opportunity Employer and participates in E-Verify. We are committed to maintaining a lawful workforce and verify employment eligibility for all newly hired employees in accordance with federal requirements.”

Job Description Pinnacle Engineering Group is searching for an Inspector I who will be responsible for supporting construction inspection and condition assessment activities by performing field inspections and monitoring construction operations for compliance with project specifications, engineering standards, safety requirements, and state, county and/or local municipality standards. This role supports project delivery through on-site construction observation, accurate field daily report documentation, field testing, record maintenance, and the preparation of reports, exhibits, and technical documentation using MS Office Suite, Bluebeam, or PDF editing software. Duties and Responsibilities: The below statements are intended to describe the general nature and scope of work being performed by this position. This is not a complete listing of all responsibilities, duties and/or skills required. Other duties may be assigned. • Perform field inspections of site development and transportation-related projects under supervision., • Assist Senior Inspectors and Construction Engineers in the preparation of inspection, evaluation, and condition assessment reports., • Monitor daily construction activities to ensure they meet blueprint specifications, plan sets, engineering standards, and safety codes., • Monitor contractor operations for adherence to state, county and/or local municipality standards., • Ensure compliance with applicable federal, state, local, and environmental regulations., • Document field observations, measurements, and photographs in accordance with governing agency and inspection standards., • Prepare report exhibits, sketches, calculations, and supporting documentation., • Perform field testing, measurements, and reporting., • Maintain accurate project records and logs., • Review shop drawings and material submittals for compliance to plans and specifications. Qualifications • 0-4 years of experience in transportation, infrastructure, roadway, utility, construction or a related field., • Must possess a valid driver's license., • Basic understanding of construction methods, materials, and inspection procedures., • Knowledge of highway design standards (e.g., AASHTO, MUTCD, DOT or local standards). (preferred), • Basic understanding of engineering and construction management tools (construction management software (e.g. ProCore), PDF editing software, scheduling software, etc.) (preferred), • Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field. (preferred) What We Offer • Competitive salary and benefits package, • Opportunities for professional growth and advancement, • Collaborative team environment with experienced professionals, • Exposure to impactful transportation infrastructure projects

Job DescriptionNorthStar Environmental Testing, LLC (NorthStar) is looking for a motivated Environmental Project Field Inspector with construction & computer knowledge to join our team in Wauwatosa, WI. This is an exciting opportunity to work hands-on in the field, playing a critical role in protecting the environment and communities around us. NorthStar is a leading provider of indoor air quality consulting and inspection services throughout Wisconsin and neighboring states. Our scope of services includes asbestos, lead-based paint, mold, radon and other industrial hygiene services to investigate and evaluate indoor air quality concerns before they become human health issues. Our strength is in providing common sense solutions to complex problems, and we have developed a strong client base through exceptional customer service and reliability. We provide value-driven environmental services, offering practical and cost-effective solutions to tackle complex challenges. By prioritizing quality service and environmental stewardship, we are committed to safeguarding the health and safety of communities. Our expertise is grounded in creating environmentally sound and economically viable strategies for our clients. About the Role: Role Description: This is a full-time, on-site role for an Environmental Inspector, based in Wisconsin. The Inspector will support the assessment of environmental hazards, such as asbestos, lead-based paint, and mold. Responsibilities include traveling to and conducting environmental testing in the field, as well as documenting samples and results, and producing professional reports with findings and recommendations. This role requires accurate documentation, ensuring compliance with environmental regulations, and effective communication with team members and clients. Primary responsibilities: Environmental site assessment to include field investigations for asbestos materials, lead-based paint, or mold depending on client needs. Sample collection and report preparation. Comfort with working independently and on construction sites. Ability to record field observations in a formal report. Ability to multi-task and work on numerous projects of various sizes and scope at once. Qualifications: Willing to train the right candidate; however, the ideal candidate possesses: Continued education/post High School degree; Building construction experience or remediation/restoration experience; Strong written and verbal skills; Comfortable operating a computer and use of Microsoft Office (Word, Excel, Outlook), CAD, and Adobe; Reliable transportation. At least 1-2 years experience in this or a directly related industry is a huge plus. Other qualifications we're looking for... • Knowledge of Environmental Services, including asbestos, mold, lead-based paint evaluation, and regulatory compliance, • Experience in Remediation processes, including hands-on removal and mitigation of environmental hazards, • Strong Communication skills to effectively collaborate with team members and interact with clients, • Attention to detail and ability to maintain accurate documentation, • Knowledge of safety protocols and procedures in environmental settings, • Prior experience or certifications in environmental technology, remediation or related fields is a plus, • HUGE plus if you are already a certified Lead Risk Assessor!Compensation: We provide competitive wages (commensurate with experience), expense/mileage reimbursement, performance-based bonuses, profit sharing, and applicable training and tools. Benefits: • Profit sharing & bonus structure, • Flexible schedule, • Health insurance reimbursement, • Holidays & Paid time off, • Personal Financial & Retirement Planning, • Professional development assistanceLocation: While this listing is for the Milwaukee area, please note we have locations all over the state - including Mosinee (Central WI), Fox Cities, Madison, Sheboygan, La Crosse... and we are growing everywhere! This position is not location-dependent, as long as you are near one of our offices and willing to travel for your role. Northstar Environmental Testing is a trusted environmental services firm that started in 2009 in Mosinee, WI. We are dedicated to delivering accurate, reliable testing and inspection solutions for our clients, giving our communities safety and peace of mind. Our clients count on us for our expertise, integrity, and commitment to environmental protection. We foster a collaborative, field-driven work culture where employees are empowered to make a real difference every day. We are a family-owned company of just over 20 people, and we truly do consider ourselves the NorthStar Family. We work hard, but we also play (and fish) hard! If this speaks to you, and you are interested in this challenging and rewarding opportunity, please submit your resume for immediate consideration. Thank you!

Job Description NorthStar Environmental Testing, LLC (NorthStar) is looking for a motivated Environmental Project Field Inspector with construction & computer knowledge to join our team in Wauwatosa, WI. This is an exciting opportunity to work hands-on in the field, playing a critical role in protecting the environment and communities around us. NorthStar is a leading provider of indoor air quality consulting and inspection services throughout Wisconsin and neighboring states. Our scope of services includes asbestos, lead-based paint, mold, radon and other industrial hygiene services to investigate and evaluate indoor air quality concerns before they become human health issues. Our strength is in providing common sense solutions to complex problems, and we have developed a strong client base through exceptional customer service and reliability. We provide value-driven environmental services, offering practical and cost-effective solutions to tackle complex challenges. By prioritizing quality service and environmental stewardship, we are committed to safeguarding the health and safety of communities. Our expertise is grounded in creating environmentally sound and economically viable strategies for our clients. About the Role: Role Description: This is a full-time, on-site role for an Environmental Inspector, based in Wisconsin. The Inspector will support the assessment of environmental hazards, such as asbestos, lead-based paint, and mold. Responsibilities include traveling to and conducting environmental testing in the field, as well as documenting samples and results, and producing professional reports with findings and recommendations. This role requires accurate documentation, ensuring compliance with environmental regulations, and effective communication with team members and clients. Primary responsibilities: Environmental site assessment to include field investigations for asbestos materials, lead-based paint, or mold depending on client needs. Sample collection and report preparation. Comfort with working independently and on construction sites. Ability to record field observations in a formal report. Ability to multi-task and work on numerous projects of various sizes and scope at once. Qualifications: Willing to train the right candidate; however, the ideal candidate possesses: Continued education/post High School degree; Building construction experience or remediation/restoration experience; Strong written and verbal skills; Comfortable operating a computer and use of Microsoft Office (Word, Excel, Outlook), CAD, and Adobe; Reliable transportation. Other qualifications we're looking for... • Knowledge of Environmental Services, including asbestos, mold, lead-based paint evaluation, and regulatory compliance, • Experience in Remediation processes, including hands-on removal and mitigation of environmental hazards, • Strong Communication skills to effectively collaborate with team members and interact with clients, • Attention to detail and ability to maintain accurate documentation, • Knowledge of safety protocols and procedures in environmental settings, • Prior experience or certifications in environmental technology, remediation or related fields is a plus, • HUGE plus if you are already a certified Lead Risk Assessor! Compensation: We provide competitive wages (commensurate with experience), expense/mileage reimbursement, performance-based bonuses, profit sharing, and applicable training and tools. Location: While this listing is for the Milwaukee area, please note we have locations all over the state - including Mosinee (Central WI), Fox Cities, Madison, Sheboygan, La Crosse... and we are growing everywhere! This position is not location-dependent, as long as you are near one of our offices and willing to travel for your role. Benefits: • Profit sharing & bonus structure, • Flexible schedule, • Health insurance reimbursement, • Holidays & Paid time off, • Personal Financial & Retirement Planning, • Professional development assistance Northstar Environmental Testing is a trusted environmental services firm that started in 2009 in Mosinee, WI. We are dedicated to delivering accurate, reliable testing and inspection solutions for our clients, giving our communities safety and peace of mind. Our clients count on us for our expertise, integrity, and commitment to environmental protection. We foster a collaborative, field-driven work culture where employees are empowered to make a real difference every day. We are a family-owned company of just over 20 people, and we truly do consider ourselves the NorthStar Family. We work hard, but we also play (and fish) hard! If this speaks to you, and you are interested in this challenging and rewarding opportunity, please submit your resume for immediate consideration. Thank you! \nCompany Description NorthStar Environmental Testing (NorthStar) is a leading provider of indoor air quality consulting and inspection services throughout Wisconsin and neighboring states. Our scope of services includes asbestos, lead-based paint, mold, radon and other industrial hygiene services to investigate and evaluate indoor air quality concerns before they become human health issues. Our strength is in providing common sense solutions to complex problems, and we have developed a strong client base through exceptional customer service and reliability. We provide value-driven environmental services, offering practical and cost-effective solutions to tackle complex challenges. By prioritizing quality service and environmental stewardship, we are committed to safeguarding the health and safety of communities. Our expertise is grounded in creating environmentally sound and economically viable strategies for our clients. NorthStar Environmental Testing (NorthStar) is a leading provider of indoor air quality consulting and inspection services throughout Wisconsin and neighboring states. Our scope of services includes asbestos, lead-based paint, mold, radon and other industrial hygiene services to investigate and evaluate indoor air quality concerns before they become human health issues. Our strength is in providing common sense solutions to complex problems, and we have developed a strong client base through exceptional customer service and reliability.\r\n\r\nWe provide value-driven environmental services, offering practical and cost-effective solutions to tackle complex challenges. By prioritizing quality service and environmental stewardship, we are committed to safeguarding the health and safety of communities. Our expertise is grounded in creating environmentally sound and economically viable strategies for our clients.

Job Description Summary Under the direction of the Quality Manager, the Quality Inspector is responsible for performing inspections on manufactured products during all stages of production and completes final inspections before shipment. The Quality Control Inspector may also inspect incoming materials for accuracy and defects. This position will ensure that products meet engineering standards and customer quality expectations. Essential Duties and Responsibilities This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. • Inspect products at various stages of production to ensure all shop floor quality checks are complete, • Input information into the QC software, • Develop Welding Procedures, • Perform WPQ testing, • Ensure all in-process inspection documentation is signed and in order, • Discuss quality issues with the production leads and supervisors to resolve issues timely, • Participates in root cause analysis, • Prepares and analyzes incident reports, • Participates in quality related training programs, • Prepare vendor audit paperwork, • Prepare internal audits, • Work schedule may cross shifts to ensure common practice, • Inter-plant travel for knowledge sharing and coverage, • Travel to vendors and company facilities to perform in process inspections Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • AWS – CWI credentials required, • Minimum of 5 years’ experience in steel fabrication or relevant industry, • Understanding of quality systems and processes, to include root cause analysis, • Ability to identify process issues and offer solutions, • Ability to identify manufacturing issues and offer solutions, • Knowledge of ASNT – SC1 inspection processes, • Must be committed to quality, • Ability to work in a cross-function team environment, • Experience in an ISO quality system preferred Education • High school degree or equivalent is required; post high school education or a technical degree or certificate is preferred Other Skills: • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent, • Excellent customer service skills which include maintaining a good attitude, taking ownership of meeting customer needs, going the “extra mile” for customers, demonstrating a commitment to sharpening skills through education and training, using positive communication, and looking for opportunities to respect customers’ time and schedules, • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form Language Skills Ability to read and interpret documents such as safety rules, production schedules, maintenance instructions, and procedure manuals. Ability to communicate effectively with other employees of the organization. Bilingual English/Spanish helpful, but not required. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand, walk, and talk or hear. The employee is occasionally required to sit and use hands to finger, handle, or touch objects, tools, or controls. The employee must occasionally lift and/or move up to 50 pounds, carrying and moving parts, materials, and product. Specific vision abilities required by this job include close vision, distance vision, color vision, and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionPosition Summary Quality Control Inspector responsible for conducting high-volume pre-shipment inspections of consumer goods, packaging, paper, printing products, and luxury bags. The role requires strong knowledge of ANSI/ASQ Z1.4-2008 AQL standards, accurate defect classification, hands-on product testing, detailed report writing, and professional communication with clients and suppliers. Years of Experience • 2–3+ years of QA/QC experience, • 2–3+ years of pre-shipment inspection experienceTechnical Skills, • ANSI/ASQ Z1.4-2008 AQL sampling standards, • Finished-goods and pre-shipment inspections, • Defect classification and AQL acceptance levels, • Dimensional, functional, barcode, rub, odor, weight, carton stacking, and drop testing, • High-volume inspection with a target of 300+ pieces per day, • Inspection reporting with photographic documentationEducation, • Associate or bachelor’s degree in Industrial, Mechanical, Chemical, Quality Engineering, or a related technical fieldExperience, • Consumer goods, packaging, paper, printing, or luxury bag inspections, • Client-facing inspections and supplier-facility work, • Ability to identify quality risks and improvement opportunitiesEquipment Knowledge, • Measuring tape or ruler, • Cotton strips for rub testing, • Barcode scanning device or app, • Personal PPE, including safety boots, safety glasses, and a high-visibility vestCertificates Required, • No certification required, • ASQ Certified Quality Inspector (CQI) or equivalent preferredSoft Skills, • Strong report writing, • Professional customer-facing communication, • Attention to detail, • Ability to work independently, • Organized and dependable, • Comfortable working in fast-paced, high-volume environments Job Type: 1099 Contractor Project Duration: TBD Note: This is a 1099 contract role – project duration may vary based on client needs Shift Hours: CURRENT PROJECT: regular day shift. Note: As a 1099 contractor, project schedules may vary depending on site availability Location: Must be able to travel around Mt Pleasant, WI and nearby areas

Position Title: Structural Engineer Location: Milwaukee, Wisconsin, United States Department: Structural Description: H&H is offering an exciting opportunity for a Structural Engineer to join our growing team in our Milwaukee, WI office. We currently have numerous design and inspection assignments for transportation infrastructure related projects within the region. H&H is a nationally recognized, full-service infrastructure engineering firm delivering innovative solutions that move communities forward. With more than 139 years of experience and over 600 professionals across 32 offices nationwide, we combine deep technical expertise with the agility of a privately owned firm. From planning and design through construction, we manage the full project life cycle while continually advancing our capabilities, strengthening our national presence, and investing in the people who power our growth. At H&H, you'll join a firm that is building on its legacy by aligning expertise, expanding opportunity, and positioning itself for long-term, sustainable growth. Responsibilities • Develop contract plans, special provisions, and engineer's estimates, • Perform structural design calculations (beam design, reinforced concrete and steel structures design and analysis), sketches, computer modeling, and similar technical work as required, • Perform load ratings on bridges and other structures, • Adhere to quality control and quality assurance procedures, • Effectively communicate and coordinate with other members of the design team, • Assist with field inspections and condition assessments of bridges and other structures, • Research design options and codes and discuss with the project manager Requirements: • Bachelor's degree required, Master's preferred, in Civil or Structural Engineering, • 3 to 8 years of relevant experience, • Wisconsin PE license, • Experience with analytical software such as SAP, CSI Bridge, LARSA 4D, MIDAS Civil, AASHTOWare Brr, etc., • Experience with CAD software such as MicroStation or AutoCAD, • Excellent written and verbal communication skills, • A highly motivated and responsible individual with a strong work ethic, • Familiarity with inspection, design and construction of bridges or other structures, • WisDOT-certified bridge inspector preferred, • Experience with WisDOT design procedures Benefits: We offer a professional work environment, competitive salary, benefits package, and 401(k). EOE M/F/ DISABILITY/VETS PI922bb50dc83f-38003-38926850

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients’ underwriting processes. EXL’s consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. _ Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Milwaukee, WI area, and other locations within approximately 45 miles of Milwaukee. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: • Digital camera or tablet, • Computer, • Printer, • High speed internet access, • Reliable vehicle, • Measuring device such as a laser, 100 ft. tape, or measuring wheel, • Auto and General Liability Insurance All interested candidates are encouraged to apply.

Job Description Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently seeking a Quality Inspector II to join our facility in Cudahy, WI. The Quality Inspector II position reports to the Quality Leader and is an integral part of a dedicated team who take great pride in helping ATI achieve production and quality results. As a Quality Inspector II, you will inspect and examine assembled parts and products, such as forgings for flaws or defects to ensure that all required standards and specifications have been met and approved to prepare parts for shipment. A successful Quality Inspector is attentive and detail oriented, able to work independently and collaboratively within a team environment and is motivated to quickly learn about ATI's products, processes, and quality standards. Responsibilities • Read and comprehend dimensional drawings., • Use multiple types of standard measuring instruments, special gauges, fixtures, templates, and others in performing assigned duties., • Check forgings visually and dimensionally, as detailed on the inspection methods sheets., • Report non-compliance to department supervision as directed., • Complete part identity marking, record dimensional data, and prepare reports as required. Requirements Basic Qualifications • Min. of 3 years of quality experience, • Experience with precision measuring devices including calipers and micrometers, • Previous experience in Quality performing inspections, • Ability to read and understand blueprint Preferred Qualifications (in addition to Basic Qualifications) • High School Diploma or GED, • CMM Experience Skills • Goal oriented, • Strong work ethic, • Understanding of basic math, • Proficient computer skills with Microsoft Office Suite, • Excellent oral and written communication skills, • Exceptional analytical, critical thinking and problem-solving capabilities, • Strong interpersonal skills and the ability to work collaboratively. We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers systems need to fly higher, dig deeper, stand stronger, and last longer -- anywhere on, above or below the earth -- ATI is proven to perform. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

Proven to Perform. From the edges of space to the bottoms of ocean, our materials are proven to perform -- and so is our team. We're hiring high performers as proven as our products. Join us. ATI is currently seeking a Quality Inspector II to join our facility in Cudahy, WI. The Quality Inspector II position reports to the Quality Leader and is an integral part of a dedicated team who take great pride in helping ATI achieve production and quality results. As a Quality Inspector II, you will inspect and examine assembled parts and products, such as forgings for flaws or defects to ensure that all required standards and specifications have been met and approved to prepare parts for shipment. A successful Quality Inspector is attentive and detail oriented, able to work independently and collaboratively within a team environment and is motivated to quickly learn about ATI's products, processes, and quality standards. Responsibilities • Read and comprehend dimensional drawings., • Use multiple types of standard measuring instruments, special gauges, fixtures, templates, and others in performing assigned duties., • Check forgings visually and dimensionally, as detailed on the inspection methods sheets., • Report non-compliance to department supervision as directed., • Complete part identity marking, record dimensional data, and prepare reports as required. Basic Qualifications • Min. of 3 years of quality experience, • Experience with precision measuring devices including calipers and micrometers, • Previous experience in Quality performing inspections, • Ability to read and understand blueprint Preferred Qualifications (in addition to Basic Qualifications) • High School Diploma or GED, • CMM Experience Skills • Goal oriented, • Strong work ethic, • Understanding of basic math, • Proficient computer skills with Microsoft Office Suite, • Excellent oral and written communication skills, • Exceptional analytical, critical thinking and problem-solving capabilities, • Strong interpersonal skills and the ability to work collaboratively. We thrive when the expectations are great, and the barriers are high. We're solving the world's most difficult challenges through materials science. Our advanced, integrated process technologies and proven performers give us a tremendous competitive advantage. When customers systems need to fly higher, dig deeper, stand stronger, and last longer -- anywhere on, above or below the earth -- ATI is proven to perform. *It is ATI's policy to not provide immigration sponsorship for any of the company's positions. ATI and its subsidiary companies will provide equal employment opportunities to all applicants without regard to applicant's race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, age, veteran status, disability status, or any other status protected be federal or state law. The company will provide reasonable accommodations to allow an applicant to participate in the hiring process if so requested.

We are committed to building a diverse and inclusive workplace that embraces the unique perspectives of our employees, our customers, patients, community stakeholders, and cultures across the world. We believe that a variety of backgrounds makes our team stronger and more innovative. At Airgas, we RESPECT, HONOR and VALUE diversity. Airgas is Hiring for a Welding Process Specialist in Milwaukee, WI or Elk Grove Village, IL! We are looking for you! • Base Pay: 90k-105k, plus commission, • Auto allowance and Mile reimbursement, • Based out of Milwaukee, WI or Chicagoland, • Comprehensive Family Benefits: Airgas offers a full benefits package designed to support your whole life, including Medical, Dental, Vision, Life, AD&D, and Disability Insurance., • Support for Parents: We offer a 14-week paid child birth benefit to support growing families., • Future Security: 401(k) Retirement Plan with company match, Tuition Assistance, Paid Holidays, Vacation, and Sick time., • Early Access: Your benefits start after just 30 days of employment At Airgas, we aren't just looking for a technician; we are looking for a contributor to process innovation. As Welding Process Specialist, you act as a Subject Matter Specialist who aligns high-level welding engineering with operational excellence. You will visit our internal field plants and external client sites to evaluate existing welding processes. Your primary focus is to look through an "operational lens" to identify bottlenecks, suggest safer techniques, and propose advanced technologies that enhance efficiency and safety. This is an advanced technical support and sales role designed to streamline the partnership process by providing compelling technical value and evidence-based solutions. • Evaluate customer welding/cutting practices and conduct "Weld Surveys" and "Efficiency Analyses" to recommend meaningful improvements., • Advance the Airgas Advanced Fabrication Sales Methodology to contribute to the growth of capital equipment, robotics, and automation solutions., • Provide knowledgeable support and sharing of expertise on CNC cutting systems, robotic welding systems, and plasma/laser integration, • Act as a mentor to the wider Welding Specialist team; provide onsite product and application training for customers to help upskill their workforce and foster development., • Coordinate the installation and servicing of fixed and robotic automation projects, ensuring alignment across all stakeholders., • Collect and report on market trends, industry activities, and customer needs to keep Airgas as a trusted reference and leader in the industry. Are you a MATCH? Required Qualifications: • Reliable transportation, current driver's license, minimum liability insurance as required by state of vehicle registration., • Evaluate customer welding/cutting practices and conduct "Weld Surveys" and "Efficiency Analyses" to recommend meaningful improvements., • Advance the Airgas Advanced Fabrication Sales Methodology to contribute to the growth of capital equipment, robotics, and automation solutions., • Provide knowledgeable support and sharing of expertise on CNC cutting systems, robotic welding systems, and plasma/laser integration, • Act as a mentor to the wider Welding Specialist team; provide onsite product and application training for customers to help upskill their workforce and foster development., • Coordinate the installation and servicing of fixed and robotic automation projects, ensuring alignment across all stakeholders., • Collect and report on market trends, industry activities, and customer needs to keep Airgas as a trusted reference and leader in the industry. Preferred Qualifications: • Welding Engineering Degree is a valuable asset. However, we also highly value diverse technical backgrounds and encourage you to apply if you have Military Welding training, a Bachelor’s degree in Engineering, or equivalent years of formalized welding experience., • Exposure to technical sales or a consultative background is welcomed., • 4+ years of experience within the welding or industrial industry, or a similar background where you have developed a deep understanding of the field. Preferred Education and Certifications • Certified Welding Inspector (CWI), • Membership within the American Welding Society (AWS), American Society for Materials (ASM), American Society for Nondestructive Testing (ASNT), American Society for Quality (ASQ), American Society for Mechanical Engineers (ASME) and/or Society for Mechanical Engineering (SME) highly desirable. Benefits We care about and support our Airgas Families. This is evident not only through our competitive compensation but also through a comprehensive benefits package that includes medical, dental, and vision plans, short-term and long-term disability, life and accidental death and dismemberment (AD&D) insurance, Employee Assistance Program (EAP), pre-tax commuter transportation benefit, parental leave, vacation, sick time, floating holidays, jury duty and funeral/bereavement leave, and paid holidays for all eligible full-time employees. Additionally, we offer our eligible employees a 401k plan with company matching funds, tuition reimbursement, discounted college tuition for eligible employees’ dependents, and an Airgas Scholarship Program for dependent children. Associates who are members of collective bargaining units should review their bargaining agreement to determine whether they are eligible for some or all of the benefits described here and to see any special terms or conditions for eligibility. _ Your DIFFERENCES enhance our PERFORMANCE At Airgas, we are committed to building a workplace that embraces the diversity of our employees, our customers, patients, community stakeholders and cultures across the world. We welcome and consider applications from all qualified applicants, regardless of their race, gender, sexual orientation, religion, disability or any other protected characteristic. We strongly believe a diverse organization opens up opportunities for people to express their talent, both individually and collectively and it helps foster our ability to innovate by living our fundamentals, acting for our success and creating an engaging environment in a changing world. _ About Airgas Airgas, an Air Liquide company, is a leading U.S. supplier of industrial, medical and specialty gases, as well as hardgoods and related products; one of the largest U.S. suppliers of safety products; and a leading U.S. supplier of ammonia products and process chemicals. Through the passion and diversity of its 18,000 associates, Airgas fosters a culture of safety, customer success, sustainability and innovation. Airgas associates are empowered to share ideas, take initiative and make decisions. Airgas is a subsidiary of Air Liquide, a world leader in gases, technologies and services for industry and healthcare. Present in 60 countries with approximately 66,500 employees, Air Liquide serves more than 4 million customers and patients. Join us for a stimulating experience: At Airgas, you matter and so does the work you do. As a member of our team, you play an important role in the success of your team, making sure our products are created sustainably and delivered safely and efficiently. In turn, you’ll find a welcoming workplace where you’re valued for who you are and where you can fill your potential while growing a fulfilling career — whatever path you choose. _ Equal Employment Opportunity Information We are an equal opportunity employer. We welcome all qualified applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. Airgas, an Air Liquide Company is a Government contractor subject to the Vietnam Era Veterans’ Readjustment Assistance Act of 1974 and Section 503 of the Rehabilitation Act of 1973. Airgas does not discriminate against qualified applicants with disabilities, and is committed to providing reasonable accommodations to the known disabilities of such individuals so as to ensure equal access to benefits and privileges of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part of the employment selection process, please contact us by email at us-accommodationrequest@airgas.com.

Brady Corporation - - Responsibilities: Final and in-process inspection and labeling of stock and custom products; Operate and troubleshoot packaging equipment; Record data per specifications, electronic or manual; Package and move orders for expeditious delivery; Maintain work area and supplies; m

Brady Corporation - - Responsibilities: Inspect finished and in-process products for quality and conformance; Read and interpret work orders and blueprints; Operate and troubleshoot packaging equipment; Record data per specification and ensure proper labeling; Maintain clean and organized work area.

Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients.

The Fire Sprinkler Technician is responsible for inspecting, testing, maintaining, and repairing fire sprinkler systems in residential, commercial, and industrial buildings.This role ensures that fire protection systems are functioning correctly and comply with safety codes and regulations to protec

Certified General License Appraiser.Partner Valuation Advisors (PVA) is actively hiring professionals to meet the increasing demands of its client base.Founded by nationally respected industry veterans, we are blazing a new trail in the valuation industry with the commitment to provide a better expe

A well-established commercial fire protection contractor is hiring a Fire Alarm Inspector to perform inspection, testing, and maintenance of fire alarm systems across a growing base of commercial customers, including office, healthcare, education, retail, and multifamily properties.

Certified General License Appraiser.Partner Valuation Advisors (PVA) is actively hiring professionals to meet the increasing demands of its client base.Founded by nationally respected industry veterans, we are blazing a new trail in the valuation industry with the commitment to provide a better expe

Pinnacle Engineering Group seeks an Inspector III to perform advanced field inspections, monitor contractor operations, and oversee condition assessment efforts for site development and transportation projects. You will support on-site construction observation, field testing, and the preparation of

Building Inspector II (LTE) to support Wisconsin projects in the Public Works Service Line.

In this role, you will observe, inspect, and document various construction projects as an Owner's Representative to assist enforcing compliance with design plans, contract specifications, and permit requirements, to document construction progress, and to help proactively resolve issues that arise in

Coast Guard project personnel and provide regular project status reporting Qualifications: Minimum 4 years of applicable construction inspection, construction management, superintendent, quality control, or similar construction experience Strong knowledge of building construction and construction tr

In this role, you will observe, inspect, and document various construction projects as an Owner's Representative to assist enforcing compliance with design plans, contract specifications, and permit requirements, to document construction progress, and to help proactively resolve issues that arise in

Take 5 Oil Change is your neighborhood go-to oil change spot. We've been doing this for over 35 years now and we pride ourselves in our friendly technicians, our oil change expertise, and our efficient process that gets you on your way safely and swiftly. All while letting you stay in the comfort of your car or truck while we change your oil. We're always looking for friendly and energetic team members to join our family. Technicians, managers, and more positions are available across the country. With our Pit Tech to President growth path, Take 5 is where you can invest in yourself while we invest in you. In fact, over 90% of our field leaders are internal promotions! At Take 5 Oil Change, leadership happens right on the shop floor. We're looking for an Assistant Shop Manager who is career-minded, enjoys working with people, takes pride in doing things the right way, and is ready to help lead a fast-paced team. In this role, you'll support the Shop Manager with daily operations, team development, and fast, friendly customer experience. You'll step in as Manager on Duty when needed, helping the team stay focused while keeping the shop safe, efficient, and running smoothly. We provide paid, hands-on training to teach the technical skills and service standards needed to succeed the Take 5 way. Automotive experience is valued, but not required! The Nuts and Bolts of the Role: • Complete our Certified Technician training., • Serve as Manager on Duty when needed by coordinating workflow and helping the team deliver safe, efficient, high-quality service., • Model fast, friendly customer service, respond to customer needs, and resolve concerns professionally., • Ensure services are completed accurately and consistently while reinforcing company procedures, safety requirements, and service standards., • Support shop performance by identifying opportunities for improvement and taking on additional leadership responsibilities when the Shop Manager is unavailable., • Train new team members, provide real-time coaching and feedback, reinforce expectations, and recognize strong performance., • Perform all Certified Technician and Lead Technician responsibilities., • Complete opening and closing procedures., • Assist with daily inventory counts and adjustments., • Support shop communication, reporting, and operational follow-up. What We're Looking For: • Minimum 6 months' customer service experience in a fast-paced service environment delivering consistent and exceptional customer service experience for every customer., • Minimum 6 months' experience leading, coaching, or mentoring others in a fast-paced environment., • A commitment to following and maintaining facility and safety control policies and practices., • Strong communication skills and comfort providing direction, coaching, and feedback to team members., • Initiative, accountability, and follow-through on responsibilities., • The ability to remain calm, organized, and solutions-focused during busy periods., • The ability to meet applicable age and certification requirements, including Inspector Certification when required., • Reliable transportation to and from your work location. What's Great About Take 5: • Competitive hourly pay plus weekly bonus opportunities., • Competitive benefits, including medical, vision, dental, and 401(k) with company match for full-time employees., • Paid time off for full-time employees., • Paid training and clear career growth paths., • Opportunities to grow from shop roles into leadership positions through strong performance and consistency. Work Environment and Physical Requirements: • This is an active, hands-on role in a fast-paced automotive service environment. All crew members must be able to:, • Lift up to fifty (50) pounds., • Maneuver safely in and out of a shallow 3-foot-deep pit to position yourself under vehicles., • Walk, stand, bend, stoop, twist, hold, grasp, pull, and turn for extended periods of time., • Work in hot or cold weather conditions when necessary. We are an Equal Opportunity Employer and we are committed to assuring equal opportunity and to opposing discrimination based on race, color, sex, gender, gender identity, gender expression, sexual orientation, age, religion, national origin, ancestry, disability, military and veteran's status, genetic information, marital status, or any other status protected by federal, state, or local law.

Take 5 Oil Change is your neighborhood go-to oil change spot. We've been doing this for over 35 years now and we pride ourselves in our friendly technicians, our oil change expertise, and our efficient process that gets you on your way safely and swiftly. All while letting you stay in the comfort of your car or truck while we change your oil. We're always looking for friendly and energetic team members to join our family. Technicians, managers, and more positions are available across the country. With our Pit Tech to President growth path, Take 5 is where you can invest in yourself while we invest in you. In fact, over 90% of our field leaders are internal promotions! At Take 5 Oil Change, leadership happens right on the shop floor. We're looking for an Assistant Shop Manager who is career-minded, enjoys working with people, takes pride in doing things the right way, and is ready to help lead a fast-paced team. In this role, you'll support the Shop Manager with daily operations, team development, and fast, friendly customer experience. You'll step in as Manager on Duty when needed, helping the team stay focused while keeping the shop safe, efficient, and running smoothly. We provide paid, hands-on training to teach the technical skills and service standards needed to succeed the Take 5 way. Automotive experience is valued, but not required! The Nuts and Bolts of the Role: • Complete our Certified Technician training., • Serve as Manager on Duty when needed by coordinating workflow and helping the team deliver safe, efficient, high-quality service., • Model fast, friendly customer service, respond to customer needs, and resolve concerns professionally., • Ensure services are completed accurately and consistently while reinforcing company procedures, safety requirements, and service standards., • Support shop performance by identifying opportunities for improvement and taking on additional leadership responsibilities when the Shop Manager is unavailable., • Train new team members, provide real-time coaching and feedback, reinforce expectations, and recognize strong performance., • Perform all Certified Technician and Lead Technician responsibilities., • Complete opening and closing procedures., • Assist with daily inventory counts and adjustments., • Support shop communication, reporting, and operational follow-up. What We're Looking For: • Minimum 6 months' customer service experience in a fast-paced service environment delivering consistent and exceptional customer service experience for every customer., • Minimum 6 months' experience leading, coaching, or mentoring others in a fast-paced environment., • A commitment to following and maintaining facility and safety control policies and practices., • Strong communication skills and comfort providing direction, coaching, and feedback to team members., • Initiative, accountability, and follow-through on responsibilities., • The ability to remain calm, organized, and solutions-focused during busy periods., • The ability to meet applicable age and certification requirements, including Inspector Certification when required., • Reliable transportation to and from your work location. What's Great About Take 5: • Competitive hourly pay plus weekly bonus opportunities., • Competitive benefits, including medical, vision, dental, and 401(k) with company match for full-time employees., • Paid time off for full-time employees., • Paid training and clear career growth paths., • Opportunities to grow from shop roles into leadership positions through strong performance and consistency. Work Environment and Physical Requirements: • This is an active, hands-on role in a fast-paced automotive service environment. All crew members must be able to:, • Lift up to fifty (50) pounds., • Maneuver safely in and out of a shallow 3-foot-deep pit to position yourself under vehicles., • Walk, stand, bend, stoop, twist, hold, grasp, pull, and turn for extended periods of time., • Work in hot or cold weather conditions when necessary. We are an Equal Opportunity Employer and we are committed to assuring equal opportunity and to opposing discrimination based on race, color, sex, gender, gender identity, gender expression, sexual orientation, age, religion, national origin, ancestry, disability, military and veteran's status, genetic information, marital status, or any other status protected by federal, state, or local law.

Warby Parker is searching for a well-rounded Sales Advisor to help us deliver the best possible service to each and every one of our customers. In supporting our retail locations across the country (and Canada!), Advisors have a direct, immediate impact on the success of Warby Parker through customer interactions, process ideation and improvement, and various special projects. We've grown to who we are today thanks in no small part to them! In this role, you'll get to show folks firsthand what Warby Parker is all about while making glasses shopping a goosebump-inducing experience. Sound cool? Read on! What you'll do: • Communicate Warby Parker's values and brand philosophy on the sales floor, • Delight customers through nothing-but-wonderful service, • Demonstrate unparalleled product knowledge and offer exceptional style advice, • Dream up ways to reinvent retail and the glasses-shopping experience, • Anticipate the needs of your team and customers alike, and be at the ready to lend hand, • Help foster an inclusive culture by treating customers and colleagues with respect Who you are: • Excited to work and learn at a fast-paced, high-growth company, • Backed by customer-facing experience in a service-minded environment, • A proactive, adaptable problem-solver who reacts quickly in unexpected situations, • A positive team player who leads by example, • Able to effectively communicate with a variety of people, • Organized, attentive, and detail-oriented, • An energetic self-starter with an entrepreneurial spirit, • Interested in fashion and technology, • Not on the Office of Inspector General's List of Excluded Individuals/Entities (LEIE) In compliance with local and state requirements, Warby Parker is committed to pay transparency. We offer a comprehensive compensation package that includes not only a competitive base salary/hourly rate but also variable compensation for eligible employees. For applicable postings, the range listed is a good faith estimate of the compensation for this position at the time of posting. Final compensation is thoughtfully determined by a variety of factors, including the candidate's qualifications, experience, internal equity, and relevant market data. For applicable postings, non-exempt employees are eligible for overtime pay if you are required to work more than 40 hours in a workweek. Some benefits of working at Warby Parker for full-time employees: • Health, vision, and dental insurance, • Life and AD&D Insurance, • Paid sick leave, • Paid Holidays, • Vacation days per year, • Retirement savings plan (401(k)), • Parental leave (non-birthing parents included), • Short-term disability, • Employee Stock Purchase Plan, • Employee Assistance Program (EAP), • Bereavement Support, • Optical Education Reimbursement, • Free eyewear, • And more (just ask!) Some benefits of working at Warby Parker for part-time employees: • Employee Assistance Program (EAP), • Employee Stock Purchase Plan, • Free eyewear, • Paid sick leave, • And more (just ask!) Warby Parker will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. If you are a California resident, please review the additional privacy disclosures available in Section 8 of our Privacy Policy, which provides a summary of how we collect, use, disclose, and share personal information about you and explain your rights under the California Privacy Rights Act ("CPRA"). It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. CO only: The application window for this position is anticipated to close on the apply before date listed. We encourage interested candidates to apply through our Career website. 1 WA only: Full-Time employees' paid sick leave is accrued at a rate of 1 hour per every 26 hours worked. Full-time employees receive 5 paid holidays and 5-10 vacation days per year (after waiting period, depending on tenure and hours worked). 2 WA PT only: Paid sick leave (accrued at a rate of 1 hour per every 30 hours worked). Warby Parker was founded with a mission: to inspire and impact the world with vision, purpose, and style. We're constantly asking ourselves how we can do more and make a greater impact, and that starts by reimagining everything that a company and industry can be. We want to demonstrate that a business can scale while doing good in the world, without charging a premium for it. And we've learned that it takes creativity, empathy, and innovation to achieve that goal. Since the day we launched in 2010, we've pioneered ideas, designed products, and developed technologies that help people see. We offer everything you need for happier eyes at a price that leaves you with money in your pocket, from designer-quality glasses and contacts to eye exams and vision tests, and you can meet us online, at our stores, or even in your home. Wherever and whenever you need it, we're there to make exceptional vision care simple and accessible. (Delightful, too.) Ultimately, we believe in vision for all, which is why for every pair of glasses or sunglasses we sell, a pair of glasses is distributed to someone in need through our Buy a Pair, Give a Pair program. • Job Identification 4596, • Job Category Retail Advisor, • Degree Level High School Graduate, • Job Schedule Part time, • Locations 53226 (On-site), • Minimum Rate/Salary 15.00, • Maximum Rate/Salary 15.00

Extensive, individually tailored and fully paid.RN Career Path – Move to RN II and RN III Level.Nursing Scholarships available for Rogers employees working on furthering education.At Rogers, our patients are our number one priority, and our nurses are key to our success.As part of our nursing team

We are currently seeking an NDT Inspector Trainee at our Cudahy, WI plant located approximately 5 miles south of Milwaukee. As an NDT Inspector Trainee, you will be an integral part of a successful team that is responsible for producing machined in military, aerospace, oil/gas and other applications

We are currently seeking an NDT Inspector Trainee at our Cudahy, WI plant located approximately 5 miles south of Milwaukee. As an NDT Inspector Trainee, you will be an integral part of a successful team that is responsible for producing machined in military, aerospace, oil/gas and other applications

We are currently seeking an NDT Inspector Trainee at our Cudahy, WI plant located approximately 5 miles south of Milwaukee. As an NDT Inspector Trainee, you will be an integral part of a successful team that is responsible for producing machined in military, aerospace, oil/gas and other applications

Quality Inspector (Fabrication & Welding)Join a team that takes pride in quality craftsmanshipCutting Edge Fabrication is a leading metal fabrication company producing medium to large, complex weldments and fabricated assemblies for customers in transportation, defense, aerospace, construction equip