Mechanical inspector jobs in Jersey City, New JerseyCreate job alerts

Job DescriptionConstruction Superintendent Laland Baptiste, LLC is a construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves on being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include the NYS Office of General Services, Dormitory Authority of the State of New York, NYC Health + Hospitals, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. Laland Baptiste is seeking on-site Construction Superintendents. This Superintendent will have project experience in Healthcare, or Buildings Rehabilitation, and willing to work in the Brooklyn Region. Scope: Construction Superintendent shall possess, at a minimum, six (6) years of experience involving large-scale building/rehabilitation projects preferably with a cost of $5 million or greater. Qualifications: • Associate’s degree in Construction Management or related field or a satisfactory equivalent of the combined education and experience. Bachelor’s degree preferred., • Minimum of 4 years’ experience shall be as an Assistant Superintendent or Inspector on large-scale, multi-contract or single prime building projects., • Must be able to develop/communicate a project work plan, monitor manpower and performance against that work plan, and be able to perform a detailed comparison of the design drawings against each other to ensure coordination between each of the various project trades., • Experience working on higher education projects (college/university preferred), including schedule and budget management experience on multi-disciplinary renovation projects., • Working knowledge of the principles of architectural design, mechanical, electrical and plumbing systems (MEP), and knowledge of construction industry practices and procedures., • Ability to interpret construction documents and possess an understanding of applicable construction codes., • Must be able to make decisions rapidly and under pressure., • Strong proficiency with MS Office and/or other construction software is required., • OSHA 30 certification., • Ability to lead, collaborate and interact effectively with a range of other project participants including architects, engineers, specialty consultants, contractors, and the Client., • Ability to work well under pressure and meet deadlines., • Strong problem-solving skills., • In depth understanding of safety protocols and regulations., • Must have a valid driver's license and reliable transportation. Benefits of Working at Laland Baptiste: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Baptiste University - Continuing Education Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR wjjItU94bq

Job DescriptionFleet Maintenance Manager – Commercial Transit (Queens, NY) Location: Queens, New York (On-Site) Schedule: Full-Time | Thursday through Monday (Weekends Required) Days Off: Tuesday & Wednesday Reporting To: National Fleet Manager About Us We are the operational force behind TopView Sightseeing and Tea Around Town (TAT), running a premier, high-volume commercial passenger motorcoach and double-decker fleet across New York City. Operating a dynamic, 24/7 transportation network, we are building a best-in-class fleet maintenance culture focused on safety, reliability, and precision execution. Backed by national corporate support and modern diagnostic infrastructure, our shop maintains the assets that power some of the most recognized luxury and tourism experiences in the NYC market. Job Description We are seeking a highly disciplined, hands-on Fleet Maintenance Manager to command daily maintenance operations for our commercial passenger fleet based in Queens, NY. This is not a passive desk job; it is a high-impact, execution-focused role requiring sharp leadership, technical vehicle fluency, and an unwavering focus on fleet uptime. Reporting directly to the National Fleet Manager, you will lead our local technician teams, strategically prioritize mechanical throughput, and guarantee that our assets meet absolute safety, compliance, and brand standards before rolling out onto the streets of New York City. Core Responsibilities • Shop Throughput & Fleet Uptime: Direct all day-to-day operations of the Queens maintenance facility to ensure maximum fleet readiness and zero missed departures., • Personnel Leadership & Accountability: Supervise, schedule, and coach a team of diesel technicians. Hold frontline staff strictly accountable to efficiency metrics, repair safety, and labor hour targets., • Real-Time Triaging: Dynamically assign and prioritize preventative maintenance (PM), diagnostics, heavy-duty electrical troubleshooting, and emergency work orders based on live operational demand., • DVIR & Compliance Ownership: Review, action, and close out all driver-reported DVIRs (Driver Vehicle Inspection Reports) daily to guarantee mechanical safety., • Data & Work Order Management: Oversee the complete lifecycle of all digital work orders, tracking labor hours, parts allocation, technician productivity, and asset repair histories in real time., • Live Driver Support: Act as the primary point of contact for drivers experiencing on-road issues; provide clear, composed troubleshooting support via phone and coordinate rapid-response roadside assistance or towing vendors if required., • Shop Administration & Compliance: Manage local shop scheduling, employee timekeeping, tool/facility maintenance compliance, and payroll-related reporting.Job QualificationsThe Non-Negotiable, • The Grid-Lock Schedule: Absolute, uncompromised commitment to a permanent Thursday through Monday shift. This is a high-volume, peak-weekend operation. Complete dependability and responsiveness during these specific days are absolute conditions of employment., • The 50+ Hour Requirement: This is a senior operational leadership role, not a punch-the-clock desk job. Successfully managing fleet throughput, DOT compliance, and a 24/7 transit network requires a minimum commitment of 50 or more hours per week.Professional Experience & Leadership, • Fleet Management Experience: 5+ years of progressive experience as a Fleet Maintenance Manager, Shop Supervisor, Lead Inspector, or senior-level heavy-duty shop foreman., • Personnel Command: Proven track record of managing, scheduling, coaching, and holding a crew of technicians strictly accountable to repair safety, quality, and workflow productivity metrics., • Technical Foundation: Strong preference for candidates who have a proven background as a heavy-duty diesel technician or shop foreman prior to moving into management. Must possess the ability to read diagnostic data, audit repair quality, and confidently troubleshoot mechanical issues over the phone with drivers., • Tech-Savvy Operations: Direct proficiency utilizing digital Fleet Management Systems (FMS), creating/tracking electronic work orders, managing parts inventory, and navigating modern shop productivity dashboards.Highly Preferred (The Competitive Edge), • Passenger Transit DNA: Prior experience managing maintenance operations specifically for motorcoaches, commercial transit buses, luxury charters, or shuttle fleets. (Strong background with Van Hool architectures is a major plus)., • NYS DOT Passenger Bus Regulatory Fluency: Deep familiarity with NYS Department of Transportation (NYSDOT) passenger bus inspection regulations, safety criteria, and out-of-service mandates. Experience preparing an over-the-road passenger fleet to pass semi-annual DOT garage inspections is highly valued., • Component Mastery: Strong diagnostic and mechanical familiarity with Cummins ISM / ISX / X15 engines, heavy-duty exhaust aftertreatment systems (DPF/SCR), and ZF EcoLife / AS Tronic transmissions., • Commercial Driving Foundations: An active or previously held CDL (Class A or B) with a Passenger Endorsement to ensure a driver’s perspective and safely assist with asset spotting/positioning within the yard.Working Conditions & Physical Requirements, • Ability to work comfortably in a fast-paced, semi-outdoor shop environment subject to seasonal New York weather variations., • Ability to physically inspect vehicles, including standing, bending, and occasionally assisting with asset spotting within the yard.Compensation & Benefits, • Compensation Range: $115,000 - $135,000 per year (commensurate with senior-level leadership and asset management experience)., • Bonus Structure: Performance-based operational incentives tied directly to fleet uptime, shop efficiency, and NYS DOT compliance pass rates., • Comprehensive Health & Wellness:, • Premium PPO/HSA Medical insurance plans with deep company-subsidized premiums., • Dental insurance plans., • Vision insurance plans., • Low-deductible healthcare options to protect you and your family., • Financial & Retirement Security:, • 401(k) Retirement Savings Plan., • Company-paid Short-Term Disability (STD)., • Company-paid Long-Term Disability (LTD)., • Company-paid Life Insurance policies., • Paid Time Off (PTO) & Holiday Cadence:, • Generous paid vacation., • Accrued sick leave., • Operational Environment: On-site access to modern diagnostic tooling, a structured corporate fleet footprint, and direct upward mobility reporting directly to National Fleet Leadership. Powered by JazzHR 1eeXYqeaCQ

Job DescriptionPosition Overview CAFCO Group is currently looking for a Construction Inspector to join our team for modernization and rehabilitation project NY City wide. Ideal candidates must possess a minimum of 5 years of experience in the construction industry and demonstrate expertise in working on large public sector projects. Experience in managing construction projects in occupied urban facilities is essential. Successful candidates will play a vital role as part of a diverse team, offering Construction Management services for various City Agencies projects. *Design-build experience preferable. Responsibilities · Provide timely detailed reports on all inspection activities.· Review construction plans and technical specifications for accuracy and code compliance.· Meet with clients to communicate project requirements and coordinate inspection plans.· Identify and resolve any discrepancies between inspection findings and approved documentation.· Ensure high level of attention to detail in all inspection operations.· Perform on-site examination of projects under construction to ensure conformance with NYC building codes and approved plans, with emphasis on architectural, plumbing, HVAC, mechanical, electrical, energy code, and related systems.· Maintain daily communication with project managers and fellow inspectors.· Expertly manage multiple simultaneous projects. Qualifications Must have experience managing construction in occupied facilities in an urban setting, preferably public facilities. · Minimum of 5 years’ experience in construction projects.· Ability to communicate effectively both verbally and in writing with the project teams, consultants, contractors, and stake holders. · Proficient level of knowledge relative to all aspects of construction inspections.· The selected candidate must be authorized to work in the United States. CAFCO Group is currently not sponsoring candidates.· Design-build would be a plus.

Job Description We are currently hiring for a Quality Control Inspector. The Quality Control Inspector's role is to inspect parts in the various stages of production, including finished goods, to verify conformance to the drawing and internal requirements in order to meet or exceed the customers' expectations. Job Requirements: Must have experience in a manufacturing QC environment, including electrical and mechanical assembly inspections Must have knowledge of how to properly use a tape measure to include fractions Proficiency in viewing and interpreting fabrication drawings Physical abilities to lift 45 lbs unassisted Primary Job Responsibilities: Inspect materials or assembled parts and products for defects and deviations from specifications. Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments. Capture non-conformance information to notify management on process / product issues. Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Special assignments as necessary. Quality Control Inspector will go through 3 stages: 1. visual - make sure there's no damages & specs are painted w/ correct color, 2. mechanical - make sure all parts are installed correctly, 3. electrical - assure electrical components function properly Schedule: Monday to Friday Hours: 7:00am to 4:00pm with occasional overtime as needed $23-26/hr.

Job Description At 20/20, we are leaders in Special inspections & Testing across the Tri-State area, offering top-notch city, national, and international code testing and inspections. Our expertise goes beyond standard safety checks; we specialize in unique and intricate projects with a commitment to excellence. Our cutting-edge on-site laboratory and dedicated technical team ensure that every project benefits from unparalleled accuracy and precision. We are seeking a skilled Special Inspectors to join our dynamic team. In this role, you will be ensuring the structural integrity and safety of steel and concrete construction through your inspections. PAY RANGE: $26.00 – $55.00 per hour Key Responsibilities: • Perform special inspections onsite (Masonry, Concrete, Rebar, Mechanical, Bolting and/or Welding)., • Collaborate with contractors, project managers, and clients to ensure inspections are performed accurately and efficiently., • Prepare and review inspection reports in a timely manner., • Report Non-Conformance items. Qualifications: • Any special inspector certifications from the following: ICC, CWI, NICET, ACI, • OSHA 10., • Bachelor's degree in Civil or Structural Engineering preferred, • Experience: Entry Level or Experienced Benefits: • PTO and Holidays., • Medical, Dental, and Vision insurance., • Travel reimbursement for select projects., • Robust career advancement program., • Bonuses based on performance.

Job Description Company Overview Special Testing & Consulting, LLC specializes in comprehensive inspection and testing services across various construction materials. Since 2006, we have expanded our expertise and service reach within our region, supported by a fully certified team of inspectors and engineers. We are a well respected Engineering and Materials Testing firm with several high profile projects throughout the NY Metro Area. Description We are seeking a motivated, experiened ICC Special Inspector in all areas, particularly in Soils, Masonry, Rebar, or Steel Reinforcement. You will be performing inspection for Soils, Masonry, Rebar, Steel Reinforcement on new construction renovation, alteration and enlargement projects throughout the NYC Metro Area. Your work will directly contribute to the integrity and durability of major construction developments. Additional openings for Mechanical Engineers and Special Inspectors with ICC Certifications in all disciplines, including Welding, CWI, NDT UT MT. Join our highly regarded Engineering and Materials Testing Company! Responsibilities • Perform thorough inspections of masonry work, rebar placement, soils or steel reinforcement in accordance with ICC (International Code Council) standards and project specifications., • Observe work conformance with plans and specifications of drawings, design documents and building codes., • Document inspection findings accurately through detailed reports and communicate non-compliance issues promptly to project teams., • Provide quality-assurance support to the assigned projects to ensure product meets clients quality requirements Certifications Needed: Must have ONE or more current certification listed: • ICC Masonry, • ICC Steel Reinforcement – Rebar, • CWI Welding Inspector or ICC Welding Inspector, • Mechanical Engineer, • ICC Special Inspector (Soils, Steel & Bolting, Reinforced Concrete, Masonry, Fireproofing, Rebar), ACI Level II or Concrete Construction, • A PLUS if you are Master Special Inspector, Civil Engineer or have multiple certs Skills • 2-5 years construction, inspection experience, • Not required, but a plus for bachelor’s Civil Engineering or related education, • Ability to read, interpret engineering drawings and specifications, • Experience in accurately performing and reporting field inspections in timely manner, • Excellent written and verbal communication, • Self-disciplined and highly motivated, • Good decision-making skills, detail oriented, accurate, • Able to travel throughout 5 boroughs of NYC Benefits • Salary based on knowledge, experience and education, • 401k Retirement with Company Match, • Paid vacation/sick, • Paid Holidays, • Medical Benefits with several plans to choose from, • Additional options available for dental, vision, life & more Apply Today! Submit salary requirements and resume We are an equal opportunity/affirmative action employer, and invite all resumes Company DescriptionIf you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! Special Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees. The Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on Special Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. As our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project. To learn more about our company, visit our website: www.Special-Testing.com. We are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.If you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! \r\n\r\nSpecial Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees.\r\n\r\nThe Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on\r\n\r\nSpecial Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. \r\n\r\nAs our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project.\r\n\r\nTo learn more about our company, visit our website: www.Special-Testing.com. \r\n\r\nWe are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Source Inspector position in the Midwest or North East Region. The schedule is for the first shift, full time, 40 hours a week, 5 days per week on an as-needed basis. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities • Perform precision inspection verifications on mechanical parts, components, assemblies, and materials, • Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings, • Perform surface plate inspection of the first article, in-process, and lot sample parts if required, • Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary, • Visual acuity and the ability to detect defects in highly complex products, • Verify documentation packages to industry/commodity-specific standards, • Classify defect types and verify rework conducted during the time of the inspection, • Must be willing to travel within the Midwest regionRequired Qualifications, • 3+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges)., • Experience with certificates of conformance and inspection documentation., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to travel to different suppliers all across your regionPreferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience., • Certification in inspection techniques or GD&T is a plus.50% hourly rate for any travel time ("p2p")Mileage reimbursement at the US gov't rate ($0.725 per mile driven). Untaxed.Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Overview Automotive Mechanical Inspector / Philadelphia, PA The objective of the Automotive Mechanical Inspector is to travel to repair facilities in your area to verify mechanical failures.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Maintain construction inspection and testing related documentation as necessary; Qualifications and Skills: • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred, • B.S. or Associate degree in Engineering, Engineering Technology, and/or Building/Construction Science preferred but not required. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Profit sharing, • Training & development Construction Inspector NYC DEP Wastewater Resource Recovery Facility Improvements (Staten Island & Queens) SRE Engineering, D.P.C. is hiring a Construction Inspector to support capital improvements at two NYC DEP Wastewater Resource Recovery Facilities, one located in Staten Island and one in the Rockaways. The work covers sludge handling and dock/marine-adjacent infrastructure improvements at operating WRRF sites. Responsibilities • Daily field inspection of contractor work, including concrete, steel, mechanical, piping, and waterfront/dock-related construction, • Maintain detailed daily reports, photo logs, and quantity records in accordance with NYC DEP procedures, • Monitor compliance with approved drawings, specifications, and contract requirements, • Coordinate with Resident Engineer, plant operations staff, and contractor field supervision, • Track materials deliveries, verify certifications, and document non-conforming work, • Support testing, commissioning, and startup activities, • Enforce site safety requirements in coordination with the EHS OfficerRequired Qualifications, • Minimum 5 years of construction inspection experience on public infrastructure projects, • Prior experience on NYC DEP, DDC, or comparable wastewater, water, or heavy civil work, • Working knowledge of NYC DEP standards, specifications, and reporting procedures, • OSHA 30 (current), • Proficiency with daily reporting software (e-Builder preferred) and Microsoft Office, • Strong written and verbal communication skillsPreferred Qualifications, • Direct experience at an operating WRRF, pump station, or sludge handling facility, • Familiarity with sludge processing equipment, piping systems, and dock or marine-adjacent construction, • HAZWOPER 40-hour, • Mechanical, electrical, or coatings inspection certifications (NACE/AMPP, ICC, NICET), • Experience working on active plant sites alongside operations personnelLocation Field assignment at NYC DEP WRRF sites in Staten Island and the Rockaways. Candidates should be willing to work at either or both locations as the project requires.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Position Overview: HES is seeking a detail-oriented Inspector to join our field inspections team supporting a utility program in New York. The Inspector will perform on-site air sealing and attic insulation inspections at multifamily properties, document conditions through photos and video, and produce post-inspection reports. This is a field-based role that benefits from solid attention to detail, good documentation habits, and the ability to manage a regular schedule of inspections across multiple sites. Key Responsibilities: Field Inspections • Conduct on-site air sealing and attic insulation inspections at multifamily properties., • Verify that installed work meets program specifications and applicable standards., • Inspect related building envelope measures as assigned, such as roof and wall insulation, above-deck roof insulation, and window replacement., • Perform interim envelope inspections prior to areas being enclosed; document any areas that have become inaccessible., • Identify deficiencies, incomplete work, or safety concerns and document them clearly in the field report. Documentation & Reporting • Capture date- and time-stamped photographs and video of pre-existing conditions, in-progress work, and completed installations., • Complete pre- and post-inspection reports using approved templates, with accuracy and clarity., • Submit inspection reports in a timely manner, in line with project needs., • Maintain organized records of all inspections, photos, and supporting documentation. Coordination & Communication • Confirm scope of work and required documentation prior to each site visit., • Coordinate site access and scheduling logistics with property contacts and program staff., • Communicate proactively about scheduling, availability, or anything that may affect inspection workflow., • Represent HES professionally to property owners, contractors, building staff, and program partners. Quality & Compliance • Follow program protocols, inspection checklists, and reporting standards., • Stay current on program guidelines and any updates to inspection requirements., • Conduct inspections in compliance with applicable health and safety standards. Qualifications: All qualifications below are preferred but not required. We are open to candidates from a range of backgrounds and are willing to provide training to the right person. • Some prior experience or interest in building inspections, construction, weatherization, or energy efficiency., • Comfort with basic technology — smartphones, tablets, cameras, and email., • Good written communication and attention to detail., • Ability to travel reliably to job sites within the assigned region. A valid driver's license is helpful but not required if you can consistently reach sites by public transportation, as many of our inspectors do., • Ability to work independently and manage a regular schedule of field visits. Preferred Certifications • BPI Building Analyst, BPI Multifamily Building Analyst, or similar certification., • HERS Rater, RESNET, or comparable credential., • OSHA 10 or OSHA 30 certification., • Prior experience with multifamily building inspections. Education • High school diploma or equivalent required., • Additional coursework, training, or certifications in construction, building science, energy efficiency, or a related field is a plus, but not required., • Relevant hands-on experience may be considered in place of formal education., • We are open to candidates from a variety of backgrounds and provide training for the right individual. Physical Requirements & Working Conditions • Ability to climb ladders and access attics, crawlspaces, rooftops, mechanical rooms, and other confined or elevated spaces., • Ability to lift and carry equipment weighing up to 40 pounds., • Comfort working in varied environmental conditions, including dusty, hot, cold, or noisy spaces., • Ability to stand, kneel, bend, and walk for extended periods throughout the workday., • Use of appropriate personal protective equipment (PPE) at all times on job sites. Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time (40 hours per week) Pay: $60,000 per year HES offers a competitive benefits package, paid time off, travel reimbursement for field work, and ongoing professional development and certification support. Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift Work Location: New York City Metropolitan Area (Field-Based) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Kids for the Future is seeking an experienced Automotive Mechanical Inspector in Philadelphia, PA.The role involves traveling to repair facilities to verify mechanical failures.Candidates must have a minimum of 5 years of hands-on automotive repair experience and valid ASE or equivalent Manufacturer

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid drivers license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect Flexible work from home options available.

The KPMG Advisory practice is at the forefront of transformation, offering excellent opportunities for individuals to advance their careers and expertise with KPMG.Looking ahead, we anticipate continued evolution and success within the practice, fostering both personal and professional development,

We are seeking a highly motivated Associate Project Manager II (APM) to support capital projects across all phases of the project lifecycle.This role is responsible for reviewing projects for compliance with New York State Fire and Building Codes and the Federal Americans with Disabilities Act (ADA)

Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues. Proficiency with mechanical systems and PM execution.

Temporary Maintenance Technician / Handyperson - Residential Buildings.We are looking for hands-on Temporary Maintenance Technicians / Handypersons to support residential buildings across New York City and Long Island based on coverage needs.This is an active, on-your-feet role focused on basic main

Job Title: Residential Property Handyperson.Rose Associates is a recognized market leader in multifamily and mixed-use real estate.Based in New York City, we own, develop and operate leading properties in urban markets from Philadelphia to Boston and across all residential asset classes, including m

Operations Maintenance Technician.American Dream, developed by Triple Five Group, is an unparalleled mix of world-class entertainment, retail, and dining, comprising more than 3 million square feet just minutes away from New York City in East Rutherford, New Jersey.American Dream is home to leading

Primary Function: Under minimal supervision, the Visual Inspector provides plastic pipeline joint inspection services to verify quality and compliance with industry and client standards on behalf of Storti Quality Services' clients. Inspect fusion and mechanical joints of polyethylene (PE) natural g

Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues.

Construction Inspector/Field Engineer. Be our next Construction Inspector/Field Engineer.

Assist inspectors, senior inspectors and Resident Engineer with observing and documenting construction activities. Construction Inspector/Field Engineer. Delve Underground is looking for a Construction Inspector/Field Engineer in our New York office within our Construction Management Practice.

This is an excellent opportunity for a Quality Inspector looking to work on the most challenging, high-profile and innovative projects. Quality Inspector - Hudson Tunnel Project | New York / New Jersey. We are currently seeking a dedicated and accomplished Quality Inspector for the Hudson Tunnel Pro

We are seeking a Fire Alarm / Life Safety Inspector to join our growing team in New York City.

Commercial Maintenance Technician - Part Time.We are an equal employment opportunity employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic prot

Building Maintenance Technician.Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns.M

Strong support team for our 1099 independent contractor field inspectors. Our 1099 Field Inspectors are the frontline experts who assist and collect data for our clients in the Property Insurance, Facility Management, and Real Estate sectors. Strong support team for our 1099 independent contractor f

Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures. Locates sources of problems by

Diagnose and troubleshoot mechanical and electrical problems, using technical manuals and sophisticated diagnostic equipment.

A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas.

Job Description Job Description JOB RESPONSIBILITY: - Work under the supervision/guidance of the Metal Shop Supervisor - Setup/operate screw machines/lathes/etc.Take approved material from stock as per job/shop order/print - Co-operate with other department/supervisors to coordinate operations bet

A detailed understanding of mechanical, electrical, hydraulic, and pneumatic subject areas.

Ensures the proper functioning of mechanical, electro-mechanical, and electronic equipment by troubleshooting, repairing, maintaining, and calibrating industrial equipment and test equipment throughout Stationary GSE in accordance with approved manuals and procedures. A detailed understanding of mec

Performs minor troubleshooting, repairs and adjustments and reports mechanical malfunctions to appropriate party for action.

Performs minor troubleshooting, repairs and adjustments and reports mechanical malfunctions to appropriate party for action.

Property Maintenance Technician Level II or III at Marsden Services, L.Shifts: 8am-4:30pm Monday-Friday (40 hours per week).Location: Midtown Manhattan (One Property).Performing a variety of related duties including equipment installation, troubleshooting, repairs, and preventative maintenance in or

We are a fast-paced and growing food manufacturing company committed to delivering high-quality products to our customers.With a strong focus on safety, efficiency, and continuous improvement, we take pride in our people-first culture and collaborative environment.We are seeking an experienced Maint

This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replaceme