Mechanical inspector jobs in New York, New YorkCreate job alerts

Job DescriptionConstruction Superintendent Laland Baptiste, LLC is a construction management and consulting firm. Laland Baptiste provides innovative and professional services throughout all phases of the construction life cycle. We pride ourselves on being loyal and reliable to our customers, clients, and our greatest assets, our people. Laland Baptiste is dedicated to providing unparalleled services throughout the construction life cycle. These services include Construction Management, Program Management, Owners Representation, Resident Engineering, Inspection, Preconstruction Consulting, Change Order Review, Value Engineering, Administration Assistance, Document Control and Staff Augmentation. Our clients include the NYS Office of General Services, Dormitory Authority of the State of New York, NYC Health + Hospitals, NYC Department of Design and Construction, NYC Parks & Recreation, NYC School Construction Authority, NYC Economic Development Corporation, Battery Park City Authority, and NYS Parks, Recreations and Historic Preservation. Laland Baptiste is seeking on-site Construction Superintendents. This Superintendent will have project experience in Healthcare, or Buildings Rehabilitation, and willing to work in the Brooklyn Region. Scope: Construction Superintendent shall possess, at a minimum, six (6) years of experience involving large-scale building/rehabilitation projects preferably with a cost of $5 million or greater. Qualifications: • Associate’s degree in Construction Management or related field or a satisfactory equivalent of the combined education and experience. Bachelor’s degree preferred., • Minimum of 4 years’ experience shall be as an Assistant Superintendent or Inspector on large-scale, multi-contract or single prime building projects., • Must be able to develop/communicate a project work plan, monitor manpower and performance against that work plan, and be able to perform a detailed comparison of the design drawings against each other to ensure coordination between each of the various project trades., • Experience working on higher education projects (college/university preferred), including schedule and budget management experience on multi-disciplinary renovation projects., • Working knowledge of the principles of architectural design, mechanical, electrical and plumbing systems (MEP), and knowledge of construction industry practices and procedures., • Ability to interpret construction documents and possess an understanding of applicable construction codes., • Must be able to make decisions rapidly and under pressure., • Strong proficiency with MS Office and/or other construction software is required., • OSHA 30 certification., • Ability to lead, collaborate and interact effectively with a range of other project participants including architects, engineers, specialty consultants, contractors, and the Client., • Ability to work well under pressure and meet deadlines., • Strong problem-solving skills., • In depth understanding of safety protocols and regulations., • Must have a valid driver's license and reliable transportation. Benefits of Working at Laland Baptiste: Medical / Prescription Plan Dental / Vision Plan Life Insurance Short / Long Term Disability Plan Flexible Spending Accounts 401K Vacation, Holiday, and Personal Days Sick Leave Baptiste University - Continuing Education Laland Baptiste LLC, is an Equal Opportunity Employer Powered by JazzHR wjjItU94bq

Job DescriptionFleet Maintenance Manager – Commercial Transit (Queens, NY) Location: Queens, New York (On-Site) Schedule: Full-Time | Thursday through Monday (Weekends Required) Days Off: Tuesday & Wednesday Reporting To: National Fleet Manager About Us We are the operational force behind TopView Sightseeing and Tea Around Town (TAT), running a premier, high-volume commercial passenger motorcoach and double-decker fleet across New York City. Operating a dynamic, 24/7 transportation network, we are building a best-in-class fleet maintenance culture focused on safety, reliability, and precision execution. Backed by national corporate support and modern diagnostic infrastructure, our shop maintains the assets that power some of the most recognized luxury and tourism experiences in the NYC market. Job Description We are seeking a highly disciplined, hands-on Fleet Maintenance Manager to command daily maintenance operations for our commercial passenger fleet based in Queens, NY. This is not a passive desk job; it is a high-impact, execution-focused role requiring sharp leadership, technical vehicle fluency, and an unwavering focus on fleet uptime. Reporting directly to the National Fleet Manager, you will lead our local technician teams, strategically prioritize mechanical throughput, and guarantee that our assets meet absolute safety, compliance, and brand standards before rolling out onto the streets of New York City. Core Responsibilities • Shop Throughput & Fleet Uptime: Direct all day-to-day operations of the Queens maintenance facility to ensure maximum fleet readiness and zero missed departures., • Personnel Leadership & Accountability: Supervise, schedule, and coach a team of diesel technicians. Hold frontline staff strictly accountable to efficiency metrics, repair safety, and labor hour targets., • Real-Time Triaging: Dynamically assign and prioritize preventative maintenance (PM), diagnostics, heavy-duty electrical troubleshooting, and emergency work orders based on live operational demand., • DVIR & Compliance Ownership: Review, action, and close out all driver-reported DVIRs (Driver Vehicle Inspection Reports) daily to guarantee mechanical safety., • Data & Work Order Management: Oversee the complete lifecycle of all digital work orders, tracking labor hours, parts allocation, technician productivity, and asset repair histories in real time., • Live Driver Support: Act as the primary point of contact for drivers experiencing on-road issues; provide clear, composed troubleshooting support via phone and coordinate rapid-response roadside assistance or towing vendors if required., • Shop Administration & Compliance: Manage local shop scheduling, employee timekeeping, tool/facility maintenance compliance, and payroll-related reporting.Job QualificationsThe Non-Negotiable, • The Grid-Lock Schedule: Absolute, uncompromised commitment to a permanent Thursday through Monday shift. This is a high-volume, peak-weekend operation. Complete dependability and responsiveness during these specific days are absolute conditions of employment., • The 50+ Hour Requirement: This is a senior operational leadership role, not a punch-the-clock desk job. Successfully managing fleet throughput, DOT compliance, and a 24/7 transit network requires a minimum commitment of 50 or more hours per week.Professional Experience & Leadership, • Fleet Management Experience: 5+ years of progressive experience as a Fleet Maintenance Manager, Shop Supervisor, Lead Inspector, or senior-level heavy-duty shop foreman., • Personnel Command: Proven track record of managing, scheduling, coaching, and holding a crew of technicians strictly accountable to repair safety, quality, and workflow productivity metrics., • Technical Foundation: Strong preference for candidates who have a proven background as a heavy-duty diesel technician or shop foreman prior to moving into management. Must possess the ability to read diagnostic data, audit repair quality, and confidently troubleshoot mechanical issues over the phone with drivers., • Tech-Savvy Operations: Direct proficiency utilizing digital Fleet Management Systems (FMS), creating/tracking electronic work orders, managing parts inventory, and navigating modern shop productivity dashboards.Highly Preferred (The Competitive Edge), • Passenger Transit DNA: Prior experience managing maintenance operations specifically for motorcoaches, commercial transit buses, luxury charters, or shuttle fleets. (Strong background with Van Hool architectures is a major plus)., • NYS DOT Passenger Bus Regulatory Fluency: Deep familiarity with NYS Department of Transportation (NYSDOT) passenger bus inspection regulations, safety criteria, and out-of-service mandates. Experience preparing an over-the-road passenger fleet to pass semi-annual DOT garage inspections is highly valued., • Component Mastery: Strong diagnostic and mechanical familiarity with Cummins ISM / ISX / X15 engines, heavy-duty exhaust aftertreatment systems (DPF/SCR), and ZF EcoLife / AS Tronic transmissions., • Commercial Driving Foundations: An active or previously held CDL (Class A or B) with a Passenger Endorsement to ensure a driver’s perspective and safely assist with asset spotting/positioning within the yard.Working Conditions & Physical Requirements, • Ability to work comfortably in a fast-paced, semi-outdoor shop environment subject to seasonal New York weather variations., • Ability to physically inspect vehicles, including standing, bending, and occasionally assisting with asset spotting within the yard.Compensation & Benefits, • Compensation Range: $115,000 - $135,000 per year (commensurate with senior-level leadership and asset management experience)., • Bonus Structure: Performance-based operational incentives tied directly to fleet uptime, shop efficiency, and NYS DOT compliance pass rates., • Comprehensive Health & Wellness:, • Premium PPO/HSA Medical insurance plans with deep company-subsidized premiums., • Dental insurance plans., • Vision insurance plans., • Low-deductible healthcare options to protect you and your family., • Financial & Retirement Security:, • 401(k) Retirement Savings Plan., • Company-paid Short-Term Disability (STD)., • Company-paid Long-Term Disability (LTD)., • Company-paid Life Insurance policies., • Paid Time Off (PTO) & Holiday Cadence:, • Generous paid vacation., • Accrued sick leave., • Operational Environment: On-site access to modern diagnostic tooling, a structured corporate fleet footprint, and direct upward mobility reporting directly to National Fleet Leadership. Powered by JazzHR 1eeXYqeaCQ

Elevate your career at Marotta Controls, a New Jersey Top Workplace three years running! Dedicated to innovation, quality and excellence, we deliver cutting edge control systems for the Aerospace & Defense industry. At Marotta, we value bold thinking and teamwork, and we empower our employees to push boundaries while delivering top-tier solutions to our customers. Our team fosters a fun, collaborative culture where creativity and technical excellence thrive! Your next big opportunity starts here. Be part of a company where your work supports a mission that makes a difference-apply today! Quality Control Inspector/ CMM Programmer Overview: The Quality Control Inspector/Programmer is responsible for visual and dimensional inspections on manufactured parts, assemblies, and/or sub-assemblies. This role inspects parts to engineering drawings, customer purchase order(s), work orders, industry standards, and specifications. The inspector may report detailed inspection accept / reject information directly to the customer with shipments. Minimum Required Qualifications : • Technical school diploma or equivalent combination of education and experience., • Minimum 5-7 years' experience with Mechanical / Electronic part inspection in a manufacturing or production Environment., • Experience in quality with machined / mechanical parts using GD&T interpretation, able to do programs for automatic inspection with Optical Vision Systems and CMMs. plus. Able to use Profilometers and special Microscopes for visual characteristics with other measuring tools and instruments., • Knowledgeable with AS9102 FAIR (First Article Inspection Report) documentation and Inspection., • Familiar with AQL, sampling methods and traceability., • Strong verbal/written communication skills required for multi-faceted interactions with all levels of personnel within the organization, as well as any and all outside agents, including but not limited to; vendors, suppliers, customers, etc., • Strong computer literacy, with MS Office/PC expertise and demonstrated experience with applicable systems, programs, equipment, etc., • Must be a US Citizen. Essential or Primary / Key Responsibilities : • Train other inspection personnel on CMM software and manual measurement techniques., • Perform Mechanical measurements and visual quality assessments of received items, work-in-progress and finished goods., • Performs 1 st Piece Inspection on machined parts and inspection for product Quality Analysis., • Inspect with thread gages, GO/NO-GO plug gages, V-Blocks, Gage Blocks, height stands, dial indicators, various types of ID/OD micrometers, inspection of thread Pitch Diameter with special gages., • Generate spreadsheets for data collection, evaluate history of product and recommend on Sample Size as per an AQL, • Reconcile final inspection documentation for shipments, • Interact with source inspector as needed and part-take in source inspection duties if necessary., • Read, understand and interpret Mechanical/Electronic drawings., • Approve incoming materials by confirming specifications, conducting visual and physical measurement of the product., rejecting if necessary and processing part thru to the next step., • Approve in-process production by confirming specifications, conducting visual, physical measurement and physical measurement of the product., communicating required adjustments to production supervisor., • Approve finished products by confirming specifications, conducting visual and physical measurement of the product., • Document inspection results by completing reports and logs, summarizing re-work and waste, and inputting data into quality database, • Always verify equipment is operational and calibrated, follow operating instructions and coordinate repairs, • Work with Engineering, Operations, and other sources to resolve issues and meet goals Additional Duties / Responsibilities : • Bring initiatives and activities to closure in a timely manner through effective interaction with individuals, both internal and external to the Marotta organization (as required)., • Maintain and continue to elevate relationships with Business Development, Engineering, Operations, Customer Service and all other facets of the company, • Abide by all safety, quality, housekeeping and company policies/procedures to ensure compliance to various regulatory and internal system requirements, • Contribute to a positive and cooperative work environment through effective communication at all levels internal and external to the organization, • Actively participate in team meetings, improvement initiatives/programs, etc. to provide constructive recommendations and initiate actions to support company initiatives/goals, • Consistently demonstrate commitment to company values, • Keep management informed of area activities and of any significant problems, • Assume responsibility for related duties as required or assigned, • Ensure that work area and work areas of direct reports are clean, secure, and well maintained, • Complete special projects and miscellaneous assignments as required Work Environment : • While performing the duties of this job, the employee can be exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment may be loud., • This job interacts both in a professional office environment and a manufacturing/machine shop environment. This role uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, as well as environments inclusive of the appropriate eye, hearing and foot protection (as required)., • This is a full-time position. Overtime and weekend work may be required as job duties demand., • Travel is rare but may be required to coordinate proper CMM inspection techniques with Suppliers. . Physical Requirements : • While performing the duties of this job, the employee is regularly required to talk and hear., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Vision and color vision must pass job-required vision screening, • The employee is occasionally required to sit; climb or balance; and stoop, kneel, or crouch, • \nThe employee may be required to lift and/or move items weighing up to 25 pounds. This position is at our Parsippany, NJ office location. Pay Range: $36.50 - $47.00/hour Many of our contracts require proof that you are a U.S. citizen and/or that an export license has been obtained for employees who are citizens of certain countries. Your employment, both initially and continually thereafter, is conditioned on production of such proof of citizenship and/or any export license that may be required to comply with any and all applicable laws, regulations, or executive orders, or required by Federal, State, or local government contracts. At Marotta Controls, we are committed to a fair, performance-driven compensation approach that promotes consistency across all levels of our organization. We ensure that pay decisions are free from bias, based on objective criteria, and are regularly reviewed. Your level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, experience, and internal consistency. Additionally, we offer a highly competitive compensation package for this opportunity, including incentive compensation and a comprehensive suite of premium benefits. These include medical, prescription, dental, vision, life, and disability insurance, a 401(k) plan with company match, tuition assistance, paid vacation, sick and personal days, paid holidays, and flexible scheduling options such as compressed workweeks. We value and reward employee achievements and host multiple engagement events each quarter to foster a strong, supportive workplace culture. If you are looking to grow or accelerate your career and be part of a best in class organization while enjoying a work-life balance, please visit our website at www.marotta.com to learn more about us and to apply. Check out all of our openings at https://marotta.com/job-openings/ VETERANS ARE ENCOURAGED TO APPLY No agencies, please. Pay Range: $36.50 - $47.00 per hour

Job DescriptionPosition Overview CAFCO Group is currently looking for a Construction Inspector to join our team for modernization and rehabilitation project NY City wide. Ideal candidates must possess a minimum of 5 years of experience in the construction industry and demonstrate expertise in working on large public sector projects. Experience in managing construction projects in occupied urban facilities is essential. Successful candidates will play a vital role as part of a diverse team, offering Construction Management services for various City Agencies projects. *Design-build experience preferable. Responsibilities · Provide timely detailed reports on all inspection activities.· Review construction plans and technical specifications for accuracy and code compliance.· Meet with clients to communicate project requirements and coordinate inspection plans.· Identify and resolve any discrepancies between inspection findings and approved documentation.· Ensure high level of attention to detail in all inspection operations.· Perform on-site examination of projects under construction to ensure conformance with NYC building codes and approved plans, with emphasis on architectural, plumbing, HVAC, mechanical, electrical, energy code, and related systems.· Maintain daily communication with project managers and fellow inspectors.· Expertly manage multiple simultaneous projects. Qualifications Must have experience managing construction in occupied facilities in an urban setting, preferably public facilities. · Minimum of 5 years’ experience in construction projects.· Ability to communicate effectively both verbally and in writing with the project teams, consultants, contractors, and stake holders. · Proficient level of knowledge relative to all aspects of construction inspections.· The selected candidate must be authorized to work in the United States. CAFCO Group is currently not sponsoring candidates.· Design-build would be a plus.

Job Description We are currently hiring for a Quality Control Inspector. The Quality Control Inspector's role is to inspect parts in the various stages of production, including finished goods, to verify conformance to the drawing and internal requirements in order to meet or exceed the customers' expectations. Job Requirements: Must have experience in a manufacturing QC environment, including electrical and mechanical assembly inspections Must have knowledge of how to properly use a tape measure to include fractions Proficiency in viewing and interpreting fabrication drawings Physical abilities to lift 45 lbs unassisted Primary Job Responsibilities: Inspect materials or assembled parts and products for defects and deviations from specifications. Observe and monitor production operations and equipment to ensure conformance to specifications and make or order necessary process or assembly adjustments. Capture non-conformance information to notify management on process / product issues. Work with Quality, Environmental, H&S employees to ensure and maintain compliance with safety, operational, and regulatory standards of Quality Has the obligation to be aware of and comply with environmental, safety policies and regulations and always endures duties of high-quality standards Special assignments as necessary. Quality Control Inspector will go through 3 stages: 1. visual - make sure there's no damages & specs are painted w/ correct color, 2. mechanical - make sure all parts are installed correctly, 3. electrical - assure electrical components function properly Schedule: Monday to Friday Hours: 7:00am to 4:00pm with occasional overtime as needed $23-26/hr.

Job Description At 20/20, we are leaders in Special inspections & Testing across the Tri-State area, offering top-notch city, national, and international code testing and inspections. Our expertise goes beyond standard safety checks; we specialize in unique and intricate projects with a commitment to excellence. Our cutting-edge on-site laboratory and dedicated technical team ensure that every project benefits from unparalleled accuracy and precision. We are seeking a skilled Special Inspectors to join our dynamic team. In this role, you will be ensuring the structural integrity and safety of steel and concrete construction through your inspections. PAY RANGE: $26.00 – $55.00 per hour Key Responsibilities: • Perform special inspections onsite (Masonry, Concrete, Rebar, Mechanical, Bolting and/or Welding)., • Collaborate with contractors, project managers, and clients to ensure inspections are performed accurately and efficiently., • Prepare and review inspection reports in a timely manner., • Report Non-Conformance items. Qualifications: • Any special inspector certifications from the following: ICC, CWI, NICET, ACI, • OSHA 10., • Bachelor's degree in Civil or Structural Engineering preferred, • Experience: Entry Level or Experienced Benefits: • PTO and Holidays., • Medical, Dental, and Vision insurance., • Travel reimbursement for select projects., • Robust career advancement program., • Bonuses based on performance.

Job DescriptionFor more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitors. We’re hiring for a Quality Mechanical Source Inspector position in the Midwest or North East Region. The schedule is for the first shift, full time, 40 hours a week, 5 days per week on an as-needed basis. If you have a passion for mechanical products and a keen eye for quality, this could be the perfect opportunity for you! Key Responsibilities • Perform precision inspection verifications on mechanical parts, components, assemblies, and materials, • Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings, • Perform surface plate inspection of the first article, in-process, and lot sample parts if required, • Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary, • Visual acuity and the ability to detect defects in highly complex products, • Verify documentation packages to industry/commodity-specific standards, • Classify defect types and verify rework conducted during the time of the inspection, • Must be willing to travel within the Midwest regionRequired Qualifications, • 3+ years of hands-on experience with precision mechanical parts inspection., • Strong ability to read and interpret manufacturing drawings and industry/commodity standards., • Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges)., • Experience with certificates of conformance and inspection documentation., • Ability to adapt to new technology and software., • Excellent visual acuity to detect defects in complex products., • Must be willing to travel to different suppliers all across your regionPreferred Qualifications, • Associate's degree or higher in a related field, or equivalent experience., • Certification in inspection techniques or GD&T is a plus.50% hourly rate for any travel time ("p2p")Mileage reimbursement at the US gov't rate ($0.725 per mile driven). Untaxed.Note: SQA is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About the Role: The Elevator Inspector plays a critical role in ensuring the safety, reliability, and compliance of elevators. This position involves conducting thorough inspections, testing mechanical and electrical components, and verifying adherence to local, state, and federal safety codes and regulations. The inspector will identify potential hazards, document findings, and recommend necessary repairs or maintenance to prevent accidents and ensure optimal operation. Ultimately, the Elevator Inspector helps protect the well-being of building occupants and the general public by enforcing rigorous safety standards and promoting best practices in elevator operation and maintenance. Minimum Qualifications: • High school diploma or equivalent., • Must possess a valid license through the NJ Department of Community of Affairs, • Valid certification or licensure as an elevator inspector as required by the state or local jurisdiction. Preferred Qualifications: • Subcode license and/or experience, • Experience working in elevator maintenance, repair, or installation., • Familiarity with computerized inspection reporting systems and mobile inspection technology., • Certification in additional safety or inspection programs, such as OSHA safety training., • Strong communication skills for effective interaction with diverse stakeholders. Responsibilities: • Perform detailed inspections of elevators, escalators, and related equipment to assess mechanical, electrical, and structural integrity., • Test safety devices, control systems, and emergency operations to ensure compliance with applicable codes and standards., • Document inspection results accurately, prepare detailed reports, and communicate findings to building owners and maintenance teams., • Identify violations or safety hazards and provide clear recommendations for corrective actions or repairs., • Stay current with evolving safety regulations, industry standards, and technological advancements related to vertical transportation systems., • Coordinate with regulatory authorities to facilitate certification and compliance processes., • Respond promptly to safety complaints or incidents involving elevators and escalators. Skills: The required skills enable the Elevator Inspector to conduct precise and comprehensive evaluations of elevator systems, ensuring all components meet stringent safety criteria. Technical proficiency in reading schematics and understanding mechanical and electrical systems is essential for identifying potential issues during inspections. Strong analytical skills help in diagnosing problems and determining the root causes of malfunctions or code violations. Effective communication skills are used daily to clearly document findings, explain safety concerns, and collaborate with building owners and maintenance personnel to implement solutions. Preferred skills, such as experience with digital reporting tools and advanced certifications, enhance efficiency and accuracy in inspections, while also supporting ongoing professional development and adherence to best industry practices.

Job Description Company Overview Special Testing & Consulting, LLC specializes in comprehensive inspection and testing services across various construction materials. Since 2006, we have expanded our expertise and service reach within our region, supported by a fully certified team of inspectors and engineers. We are a well respected Engineering and Materials Testing firm with several high profile projects throughout the NY Metro Area. Description We are seeking a motivated, experiened ICC Special Inspector in all areas, particularly in Soils, Masonry, Rebar, or Steel Reinforcement. You will be performing inspection for Soils, Masonry, Rebar, Steel Reinforcement on new construction renovation, alteration and enlargement projects throughout the NYC Metro Area. Your work will directly contribute to the integrity and durability of major construction developments. Additional openings for Mechanical Engineers and Special Inspectors with ICC Certifications in all disciplines, including Welding, CWI, NDT UT MT. Join our highly regarded Engineering and Materials Testing Company! Responsibilities • Perform thorough inspections of masonry work, rebar placement, soils or steel reinforcement in accordance with ICC (International Code Council) standards and project specifications., • Observe work conformance with plans and specifications of drawings, design documents and building codes., • Document inspection findings accurately through detailed reports and communicate non-compliance issues promptly to project teams., • Provide quality-assurance support to the assigned projects to ensure product meets clients quality requirements Certifications Needed: Must have ONE or more current certification listed: • ICC Masonry, • ICC Steel Reinforcement – Rebar, • CWI Welding Inspector or ICC Welding Inspector, • Mechanical Engineer, • ICC Special Inspector (Soils, Steel & Bolting, Reinforced Concrete, Masonry, Fireproofing, Rebar), ACI Level II or Concrete Construction, • A PLUS if you are Master Special Inspector, Civil Engineer or have multiple certs Skills • 2-5 years construction, inspection experience, • Not required, but a plus for bachelor’s Civil Engineering or related education, • Ability to read, interpret engineering drawings and specifications, • Experience in accurately performing and reporting field inspections in timely manner, • Excellent written and verbal communication, • Self-disciplined and highly motivated, • Good decision-making skills, detail oriented, accurate, • Able to travel throughout 5 boroughs of NYC Benefits • Salary based on knowledge, experience and education, • 401k Retirement with Company Match, • Paid vacation/sick, • Paid Holidays, • Medical Benefits with several plans to choose from, • Additional options available for dental, vision, life & more Apply Today! Submit salary requirements and resume We are an equal opportunity/affirmative action employer, and invite all resumes Company DescriptionIf you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! Special Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees. The Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on Special Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. As our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project. To learn more about our company, visit our website: www.Special-Testing.com. We are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.If you are looking to join of a highly regarded Engineering firm with long term career goals - then we are the right company for you! For 20 years Special Testing has been providing employees an inclusive, amicable and busy environment. We offer competitive salaries are based on each person's experience and knowledge. Our full benefits package includes, 401k retirement with company match; paid time off for vacation, sick, personal; paid company observed holidays; medical with several options to choose from as well as options for dental, vision, life insurance, disability, hospital and more! \r\n\r\nSpecial Testing & Consulting, LLC was founded by Sam Sette, P.E and Bobby Bora who have earned a highly regarded reputation in the New York City construction industry for professionalism, technical knowledge and responsiveness to clients’ needs. Visioning the future of the industry with technological advances in communication and the need for speed in responsiveness, the company was formed to address these changing client needs. Both owners are proud to be actively involved in each project and remain available to their clients as well as their employees.\r\n\r\nThe Company’s mission is not only to provide high standards of quality service to our clients, but just as importantly, to communicate the findings and results to our clients with clear concise reports and speed that our clients depend on\r\n\r\nSpecial Testing & Consulting, LLC has a full service in-house testing laboratory that is licensed by the New York City Building Department and successfully assessed by the Cement and Concrete Reference Laboratory (CCRL). It is operated under the supervision of a New York State Licensed Professional Engineer and all testing is performed by American Concrete Institute (ACI) and/or International Code Council (ICC) certified inspectors. Our laboratory includes a state of the art moisture controlled curing room and work stations for concrete testing and for soil testing; all with new equipment furnished in each station. \r\n\r\nAs our company name suggests, we are fully equipped to provide Specialty Testing Services. The Company owns equipment including concrete coring equipment, rebar finders (pachometer), windsor probe and pin equipment, hydraulic jacks and steel test fixtures for pull testing, etc. so that we can service any special needs of a project.\r\n\r\nTo learn more about our company, visit our website: www.Special-Testing.com. \r\n\r\nWe are an equal opportunity employer and invite all resumes. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Inspector for our client in the Electronic Instruments and Electromechanical Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Garden City, NY Salary: $26.00-$31.00/Hourly Role: Inspector Primary Skills: Engineering Role Description: The Inspector must have 5+ years of experience. In this role, you will be responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Must have good communication skills, able to read and follow client work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions., • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment., • Prepare and maintain inspection reports., • Program and/or operate Coordinate Measuring Machine., • Perform Hardness testing., • Collect and tabulate data for SPC use., • Review Supplier F.A.I.R./Generate First Article Reports per AS9102., • Other duties as directed by the management. Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word., • Interpret drawing requirements/specs and geometric dimensions and tolerances., • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards., • PCDMIS programming skills., • Familiar with special process specifications for heat treatment, welding, and non-destructive testing. Education and Experience: • High school graduate., • 3-5 Years of mechanical inspection, aerospace experience., • Post high school education in math, engineering, inspection techniques or related fields a plus. Equipment Used: • Vernier calipers., • Micrometers., • Height Gauges., • CMM machines., • Other standard measuring tools/instruments. Education: High School graduate/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Overview Automotive Mechanical Inspector / Philadelphia, PA The objective of the Automotive Mechanical Inspector is to travel to repair facilities in your area to verify mechanical failures.

Job Description Hazen and Sawyer is seeking a Construction Inspector to support the construction of water and wastewater treatment facilities and infrastructure located in the greater NYC Metro area and Springfield, MA. The selected candidate will inform the CM team by observing and reporting on construction activities, effectively coordinating and collaborating with the project team members, and providing documentation and inspection activities for various water and wastewater facilities and infrastructure. Responsibilities include: • Review and interpret project drawings, specifications and work plans to verify contractor compliance;, • Conduct on-site observation, monitoring, inspection, and evaluation of construction activities;, • Verify and track work in accordance with approved shop drawing submittals;, • Observe contractor performance and compliance with safety requirements;, • Prepare daily reports, verify material quantities, Time and Material (T&M) records and review contractor pay applications;, • Monitor construction contractor’s adherence to project schedule and sequence of activities related to daily field observations;, • Maintain project redline and as-built drawings;, • Coordinate and communicate effectively with the CM Project team, multi-discipline engineering teams, contractors and third-party inspection/testing firms;, • Assist and coordinate with project start-up, testing checkout and training activities;, • Maintain construction inspection and testing related documentation as necessary; Qualifications and Skills: • Minimum 5 years of construction / construction observation experience;, • Familiarity with construction methods typical of civil, structural, mechanical and/or electrical engineering work;, • Excellent verbal, written, and interpersonal skills, organizational and problem-solving skills;, • Experience working on and collaborating with multidisciplinary teams, • Willing to travel and stay local to projects in the NYC Metro area as needed., • Proficiency with Microsoft Office Suite, Microsoft Project and related PC software packages used on construction projects, • Experience in municipal water and wastewater or similar industry construction inspection preferred, • B.S. or Associate degree in Engineering, Engineering Technology, and/or Building/Construction Science preferred but not required. We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance, • Profit sharing, • Training & development Construction Inspector NYC DEP Wastewater Resource Recovery Facility Improvements (Staten Island & Queens) SRE Engineering, D.P.C. is hiring a Construction Inspector to support capital improvements at two NYC DEP Wastewater Resource Recovery Facilities, one located in Staten Island and one in the Rockaways. The work covers sludge handling and dock/marine-adjacent infrastructure improvements at operating WRRF sites. Responsibilities • Daily field inspection of contractor work, including concrete, steel, mechanical, piping, and waterfront/dock-related construction, • Maintain detailed daily reports, photo logs, and quantity records in accordance with NYC DEP procedures, • Monitor compliance with approved drawings, specifications, and contract requirements, • Coordinate with Resident Engineer, plant operations staff, and contractor field supervision, • Track materials deliveries, verify certifications, and document non-conforming work, • Support testing, commissioning, and startup activities, • Enforce site safety requirements in coordination with the EHS OfficerRequired Qualifications, • Minimum 5 years of construction inspection experience on public infrastructure projects, • Prior experience on NYC DEP, DDC, or comparable wastewater, water, or heavy civil work, • Working knowledge of NYC DEP standards, specifications, and reporting procedures, • OSHA 30 (current), • Proficiency with daily reporting software (e-Builder preferred) and Microsoft Office, • Strong written and verbal communication skillsPreferred Qualifications, • Direct experience at an operating WRRF, pump station, or sludge handling facility, • Familiarity with sludge processing equipment, piping systems, and dock or marine-adjacent construction, • HAZWOPER 40-hour, • Mechanical, electrical, or coatings inspection certifications (NACE/AMPP, ICC, NICET), • Experience working on active plant sites alongside operations personnelLocation Field assignment at NYC DEP WRRF sites in Staten Island and the Rockaways. Candidates should be willing to work at either or both locations as the project requires.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Position Overview: HES is seeking a detail-oriented Inspector to join our field inspections team supporting a utility program in New York. The Inspector will perform on-site air sealing and attic insulation inspections at multifamily properties, document conditions through photos and video, and produce post-inspection reports. This is a field-based role that benefits from solid attention to detail, good documentation habits, and the ability to manage a regular schedule of inspections across multiple sites. Key Responsibilities: Field Inspections • Conduct on-site air sealing and attic insulation inspections at multifamily properties., • Verify that installed work meets program specifications and applicable standards., • Inspect related building envelope measures as assigned, such as roof and wall insulation, above-deck roof insulation, and window replacement., • Perform interim envelope inspections prior to areas being enclosed; document any areas that have become inaccessible., • Identify deficiencies, incomplete work, or safety concerns and document them clearly in the field report. Documentation & Reporting • Capture date- and time-stamped photographs and video of pre-existing conditions, in-progress work, and completed installations., • Complete pre- and post-inspection reports using approved templates, with accuracy and clarity., • Submit inspection reports in a timely manner, in line with project needs., • Maintain organized records of all inspections, photos, and supporting documentation. Coordination & Communication • Confirm scope of work and required documentation prior to each site visit., • Coordinate site access and scheduling logistics with property contacts and program staff., • Communicate proactively about scheduling, availability, or anything that may affect inspection workflow., • Represent HES professionally to property owners, contractors, building staff, and program partners. Quality & Compliance • Follow program protocols, inspection checklists, and reporting standards., • Stay current on program guidelines and any updates to inspection requirements., • Conduct inspections in compliance with applicable health and safety standards. Qualifications: All qualifications below are preferred but not required. We are open to candidates from a range of backgrounds and are willing to provide training to the right person. • Some prior experience or interest in building inspections, construction, weatherization, or energy efficiency., • Comfort with basic technology — smartphones, tablets, cameras, and email., • Good written communication and attention to detail., • Ability to travel reliably to job sites within the assigned region. A valid driver's license is helpful but not required if you can consistently reach sites by public transportation, as many of our inspectors do., • Ability to work independently and manage a regular schedule of field visits. Preferred Certifications • BPI Building Analyst, BPI Multifamily Building Analyst, or similar certification., • HERS Rater, RESNET, or comparable credential., • OSHA 10 or OSHA 30 certification., • Prior experience with multifamily building inspections. Education • High school diploma or equivalent required., • Additional coursework, training, or certifications in construction, building science, energy efficiency, or a related field is a plus, but not required., • Relevant hands-on experience may be considered in place of formal education., • We are open to candidates from a variety of backgrounds and provide training for the right individual. Physical Requirements & Working Conditions • Ability to climb ladders and access attics, crawlspaces, rooftops, mechanical rooms, and other confined or elevated spaces., • Ability to lift and carry equipment weighing up to 40 pounds., • Comfort working in varied environmental conditions, including dusty, hot, cold, or noisy spaces., • Ability to stand, kneel, bend, and walk for extended periods throughout the workday., • Use of appropriate personal protective equipment (PPE) at all times on job sites. Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time (40 hours per week) Pay: $60,000 per year HES offers a competitive benefits package, paid time off, travel reimbursement for field work, and ongoing professional development and certification support. Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift Work Location: New York City Metropolitan Area (Field-Based) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Join a Leader in Precision Engineering Valcor Engineering is a trusted name in aerospace, nuclear, and defense sectors. As one of the largest providers of fluid control products, our legacy is built on precision, reliability, and innovation. We're currently looking for a Mechanical Inspector to join our quality team. If you have a mechanical mindset, strong attention to detail, and enjoy working in a hands-on environment—this is the role for you! Under general supervision, the Inspector position requires the mechanical ability to perform first piece and sample inspection. Using standard inspection equipment, solves standard inspection problems and lays out of complicated parts, casting, and assemblies. Makes decisions concerning minor inspection problems, using complicated blueprints and specifications. JOB SUMMARY Under limited supervision, performs the inspection of the most complex parts and assemblies. Inspector A requires the mechanical ability and experience to perform inspections of simple electrical, complex mechanical, pneumatic and hydraulic components and assemblies. In addition, they perform complicated layout inspection for the first piece, in process and final inspection. Inspector A makes decisions regarding inspection problems and skillfully uses all inspection gauges and instruments, including their set up, analysis and adjustment. ESSENTIAL FUNCTIONS • Performs required inspections of complex parts and assemblies using complicated blueprints, sketches, written and/or verbal specifications., • Documents inspection results and makes decisions regarding inspection problems., • Skillfully uses all inspection gauges and instruments, including their set up, analysis and adjustment., • Calibrates measuring gauges and equipment as directed., • May lead and assist other inspectors and make set ups for their use., • Moves parts and materials to and from work area., • Works closely with Engineering, Assembly/Test and Operations to resolve quality issues., • May be Level I Operator or Level II Inspector in one or more of the following areas: liquid penetrant, utlars-sonic or eddy currents., • Must pass required eye tests and will be subject to the random drug and alcohol testing program., • Required to follow company policies (Safety, Attendance etc), • Maintains a clean well organized work area., • Interact with organizational team members and other departments in a professional manner., • Performs other duties as assigned by management. MINIMUM QUALIFICATIONS • Requires a high school diploma or equivalent, advanced technical education preferred., • Requires five years’ experience as an inspector with demonstrated acceptable performance of the required inspection operations., • Demonstrated effective verbal and written communication skills. REQUISITE SKILLS REQUIRED • Works from complicated blueprints, sketches, written and/or verbal specifications., • Requires the use of standard shop math, including trigonometry and geometry, and a full knowledge of machine shop and assembly operations., • Understanding of basic electronics, pneumatics and hydraulics EQUIPIMENT/MACHINERY USED Experience in using basic and advanced inspection tools and gauges, plus experience with CMM and other currently used inspection equipment. PHYSICAL REQUIREMENTS Lifting up to 50lbs regularly and 75lbs occasionally, pushing, pulling, standing for long periods of time, manual dexterity, visual acuity, and typing. Why Join Valcor Engineering? • Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy., • Team-Focused Culture: Work with a skilled, collaborative group of industry pros., • Career Growth: Opportunities to develop and move up in a growing company., • Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. POSITION PURPOSE This position will be responsible for providing inspection and technical program support for equipment inspection, test, and repair portions of the overall Mechanical Integrity/Quality Assurance effort. The role will primarily focus on the Red Lion (Delaware City, DE) and Morses Mill (Linden, NJ) facilities while also being integrated and part of the Nexpera Technology Center, which provides support to all Nexpera sites. The role will reside at Red Lion (Delaware City, DE) PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Develop/Authorize/Maintain and implement standardized inspection plans for all PSM Critical Equipment, including pressure vessels, process vessels, heat exchangers, piping, storage tanks, and other equipment., • Perform equipment inspection in accordance with API 510, API653and API 570 guidelines and regulations., • Complete post inspection reports and provide recommendations and/or modifications for immediate concerns and future consideration., • Develop, implement and document repair plans for fixed equipment, • Perform field contract administration duties during field repairs of equipment, • Standardize, organize, and maintain required documentation (design bases, inspection plans, inspection reports, etc.) in accordance with corporate and site MIQA best practices., • Update SAP and equipment files with equipment history, Inspection Plans., • Ensure that all inspections and tests are performed in accordance with the original equipment design basis and in alignment with recognized and accepted good engineering practice (RAGAGEP)., • Ensure that all repairs to fixed PSM Critical Equipment is documented in accordance with OSHA 1970.119, • Evaluate the fitness-for-service of all fixed PSM Critical Equipment and assist other Technical/Maintenance resources in properly developing and documenting any repairs to return the equipment service., • Perform necessary calculations required within the RAGAGEP to determine the minimum allowable thickness of pressure vessels, piping, and tanks in PSM Critical service., • Provide functional guidance to Veolia and contract NDE Examiners, • Evaluate results of various non-destructive inspections on process equipment and provide recommendations based on those inspection results, • Act as an Authorized Inspector for PSM Critical pressure vessel, piping, and storage tank inspections and tests, as well as for approval of all alterations to PSM Critical pressure vessels, piping, and storage tanks., • Manage & Implement the Corrosion Monitoring program PSAIM® for the sites, • Coordinate contract NDE inspections and perform Field Contract Administrator responsibilities, • Develop Quality Assurance Plans for fabrication of new equipment (ex. tanks, pressure vessels, piping, etc.), • Perform/coordinate QA inspections of new equipment on site and at shop locations., • Estimate equipment remaining life per the applicable RAGAGEP., • Maintaining the site Owners User Manual as applicable. Qualifications In order to be qualified for this role, the following is required: • 3 plus years work experience within high hazardous chemical processing or oil refining industries or similar industries, • At least 2 out of 3 of the following certifications: API 510, API 570, API 653, • Able to travel ~40% per year, • Working knowledge of Process Safety Management (PSM), • Ability to obtain any missing API certification (API 510, API 570, API 653) within 2 years of employment, • Comprehensive working knowledge of API 510, 570, 653, 579, 580, ASME B31.1, B31.3, Section V, VIII, IX, NBIC, NACE SP0294 requirements governing inspection & tests, fitness for service, and repair of process piping, pressure vessels, and tanks, • Ability to develop and implement inspection plans for piping, pressure vessels, and storage tanks., • Ability to develop, implement, and analyze repair procedures for fixed equipment., • Thorough knowledge of non-destructive examination techniques, including UT, VT, RVT, RT, MT, Eddy Current, IRIS, Shear Wave, etc. Level II certifications a plus, • Knowledge of welding practices and procedures, • Ability to perform confined space entry, • Excellent interpersonal skills, coupled with superior oral and written communication skills, enabling ability to influence all levels of personnel., • Demonstrated proficiency with MS Office, • Prioritization and organizing capabilities, • Disciplined in functioning in a self-directed work environment, • Be extremely detail oriented with excellent written and communication skills, • Current and valid driver’s license, • Currently have or able to obtain a Transportation Worker Identification Card (TWIC) Physical Requirements/Work Environment • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toes, hardhat, protective eyewear, sir supplies and cartridge respirator, etc., • Willing and able to climb stairs, ladders, stand, walk, stoop, bend, kneel, crawl, visual acuity for close work, able to reach overhead, able to hear and respond to alarms., • Successful candidates must be able to perform the essential functions of the job with or without accommodation. BENEFITS NEXPERA's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job DescriptionDescription: A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. • Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components., • Performs finished good inspections., • Performs start-up and in process inspections., • Monitors specific areas of production as directed by the Quality Control Supervisor., • Makes measurements and records data as per inspection forms or job cards., • Performs testing and records data for statistical process control (SPC) during manufacturing, (when required)., • Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern., • Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern., • Performs computer set up for label printing programs on cutting lines., • Assists Engineering as needed for experimental testing., • Enters finished goods inspection data into BMS as appropriate., • Any other duties as assigned by supervisor.Requirements:, • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Ability to handle numbers required., • Strong interpersonal skills., • Ability to use micrometer, computers, testing equipment and electronic balance is essential., • Experience using Excel is preferred., • Ability to speak, read, and write in English. Education & Experience • High school diploma or equivalent. Working Conditions • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles., • The noise level in the work environment is usually moderate. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: • Paid holidays, • Employee Assistance Program Eligible after 90-day probation period: • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • Sick time Eligible after 1 year of service: • 401(k) with Employer Match, • Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at HR@Bairdindustries.com.

Kids for the Future is seeking an experienced Automotive Mechanical Inspector in Philadelphia, PA.The role involves traveling to repair facilities to verify mechanical failures.Candidates must have a minimum of 5 years of hands-on automotive repair experience and valid ASE or equivalent Manufacturer

Job DescriptionDescription: The Spooling Inspector is in charge of checking all cable used in production to determine defects that may affect quality of the final product. Duties and Responsibilities: • Inspects and tests coated or uncoated wire and cable for such properties as electrical resistance, size, and tactile inspection to verify their conformance to specifications., • Reads written specifications or receives oral instructions and determines work aids required and inspection procedures., • Measures wire/cable for size, and defects using micrometers and fixed gauges., • Examines wire for defects, such as pits, scratches, and burnt surfaces., • Records test results and informs supervisor when wire varies from specifications., • Respools cables according to customers specification and perform final inspections of spools., • Any other duties as assigned by supervisor.Requirements:, • Six months to one year of work experience is preferred., • Demonstrates ability to self-motivate and to problem solve in a fast-paced setting., • Excellent organizational skills and attention to detail., • Must have good documentation practice., • A proven understanding of part workmanship., • Must be capable and willing to share knowledge and train associates., • Ability to analyze data and make recommendations., • Ability to troubleshoot manufacturing defects., • Strong interpersonal skills., • Ability to seek and accept feedback from others., • Ability to speak, read, and write in English. Education & Experience • High school diploma or equivalent Working conditions • While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes or airborne particles, • The noise level in the work environment is usually moderate. Physical requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job; e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc., • Ability to lift items weighing 10-15 lbs. Pay: $17.00 - $17.00/ hour Benefits: Eligible after 1st day: • Paid holidays, • Employee Assistance Program Eligible after 90-day probation period: • Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance, • Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account, • Vacation time, • Sick time Eligible after 1 year of service: • 401(k) with Employer Match, • Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We’re proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don’t discriminate based on an individual’s race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at HR@Bairdindustries.com.

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid drivers license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect Flexible work from home options available.

Job Description Quality Inspector - Garden City, New York If you have AS9100 Aerospace experience that would be highly desirable or work in a manufacturing facility that involves machining products About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience desirable but not a dealbreaker, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is a hourly role paying about $27 an hour but also has up to 20 hours of OT that sometimes goes into double time for certain days. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionLead Fleet Mechanic Automotive and Machinery Location: Hempstead, NY (In-person, on-site at main facility; field work as needed across Long Island and NYC service areas) Employment Type: Full-Time, Non-Exempt (Hourly) Schedule: 40 hours per week standard (typically Monday through Friday, shop hours); overtime at time-and-a-half as needed for peak seasons, emergencies, or high demand Compensation: $35 to $45 per hour (based on experience, certifications, and skills) Join a stable, family-owned business with more than 65 years of trusted service in the irrigation and landscaping industry. With a fleet of about 80 vehicles and pieces of equipment (service trucks, light-duty vehicles, trailers, small engines, skid steers, loaders, pumps, and irrigation machinery), you will keep operations running smoothly for a team of 90 to 95 people. This hands-on lead position includes preventive maintenance, diagnostics, repairs, and the opportunity to perform in-house New York State vehicle inspections once the facility becomes a licensed inspection station. Key Responsibilities • Perform preventive maintenance, diagnostics, and repairs on a mixed fleet of gasoline and diesel trucks, vans, trailers, small engines, and landscaping/construction machinery., • Troubleshoot and fix mechanical, electrical, hydraulic, and drivetrain problems in both shop and field settings (including job-site repairs during busy seasons)., • Conduct independent diagnostics using scan tools, multimeters, pressure gauges, and OEM software., • Handle major repairs such as engine rebuilds, transmission work, hydraulic overhauls, and component replacements when required., • Prioritize and manage multiple breakdowns efficiently in a fast-paced, high-volume environment., • Keep accurate repair records, track parts inventory, and document work for compliance and efficiency., • Perform (or prepare to perform) New York State annual safety and emissions inspections on company vehicles once the facility is licensed as an inspection station., • Work independently with minimal supervision while coordinating with operations teams., • Maintain strict safety standards and company protocols on every job., • Be available for overtime, emergency field repairs, and peak-season demands.Required Qualifications, • 5 or more years (10 or more years preferred) of hands-on experience as an automotive, fleet, or machinery mechanic., • Proven expertise with gasoline and diesel engines, hydraulic systems, electrical diagnostics (including CAN bus where applicable), and drivetrain repairs., • Valid New York State driver's license (clean record preferred)., • New York State Certified Motor Vehicle Inspector (Group 1/Safety Inspector) certification required (or ability and willingness to obtain promptly; company supports the process to become a licensed private fleet inspection station for internal efficiency)., • Strong problem-solving and diagnostic skills (real troubleshooting, not just parts swapping)., • Physical ability to lift heavy objects, work in varying outdoor conditions, and perform field repairs., • Reliable, punctual, safety-conscious, and organized with good communication skills for clear reporting.Preferred Qualifications, • Experience with heavy equipment, construction machinery, skid steers/loaders, small engines, trucks/light vehicles, or irrigation-related equipment., • ASE certifications, CDL, welding/fabrication skills, or major component rebuild experience., • Familiarity with fleet maintenance in service industries (landscaping, irrigation, construction)., • Comfort working on both vehicles and specialized machinery.What We Offer, • Hourly pay of $35 to $45 based on experience, certifications, and skills., • Overtime at time-and-a-half during peak seasons, emergencies, or busy periods., • Employer-sponsored health insurance (partial contribution), dental (employee-paid), 401(k) with partial match, paid time off, and potential tool allowances or other perks., • Stable, year-round work in a long-standing family-owned business with a strong reputation., • Opportunity to grow into a lead role in a supportive, collaborative environment.If you have the technical skills, leadership mindset, and drive to keep a large fleet and field teams moving reliably, apply today. This is a chance to make a direct impact in a respected, growing operation.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Walmart is expanding its massive workforce, and American Career Guide is here to help you explore available roles at the retail giant.Positions are open across multiple departments, offering career paths for both entry-level talent and experienced professionals.Join the Walmart team and help provide

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Apply advanced electrical and mechanical assembly techniques to troubleshoot issues and support production objectives. Background in automotive mechanics, mechanical assembly, or a related field. Experience operating automated equipment and an understanding of mechanical assembly processes and manuf

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Apply advanced electrical and mechanical assembly techniques to troubleshoot issues and support production objectives. Background in automotive mechanics, mechanical assembly, or a related field. Experience operating automated equipment and an understanding of mechanical assembly processes and manuf

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

The ideal candidate has both mechanical and electronics assembly experience and is comfortable working in a fast-paced production environment. Troubleshoot mechanical and electrical issues. Mechanical assembly experience (including piping).

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

The ideal candidate has both mechanical and electronics assembly experience and is comfortable working in a fast-paced production environment. Troubleshoot mechanical and electrical issues. Mechanical assembly experience (including piping).

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Mechanical assembly experience (including piping). The ideal candidate has both mechanical and electronics assembly experience and is comfortable working in a fast-paced production environment. Troubleshoot mechanical and electrical issues.

Want to be your own boss? With the Spark Driver™ app, you can make some extra cash by shopping and delivering for customers of Walmart and other local businesses.Available in more than 3,650 cities and all 50 states, the Spark Driver platform makes it possible for you to reach thousands of custome

Background in automotive mechanics, mechanical assembly, or a related field. Experience operating automated equipment and an understanding of mechanical assembly processes and manufacturing workflow. Apply advanced electrical and mechanical assembly techniques to troubleshoot issues and support prod

Building Maintenance Technician.Are you an experienced Maintenance Technician ready to join our fantastic team of professionals? MMS Group is on the hunt for someone like YOU! Our Maintenance technicians are responsible for the maintenance operations related to apartment home upkeep and unit turns.M

Primary Function: Under minimal supervision, the Visual Inspector provides plastic pipeline joint inspection services to verify quality and compliance with industry and client standards on behalf of Storti Quality Services' clients. Inspect fusion and mechanical joints of polyethylene (PE) natural g

Operations Maintenance Technician.American Dream, developed by Triple Five Group, is an unparalleled mix of world-class entertainment, retail, and dining, comprising more than 3 million square feet just minutes away from New York City in East Rutherford, New Jersey.American Dream is home to leading

This is an excellent opportunity for a Quality Inspector looking to work on the most challenging, high-profile and innovative projects. Quality Inspector - Hudson Tunnel Project | New York / New Jersey. We are currently seeking a dedicated and accomplished Quality Inspector for the Hudson Tunnel Pro

Diagnose and repair mechanical, hydraulic, pneumatic, and basic electrical issues. Proficiency with mechanical systems and PM execution.

Construction Inspector/Field Engineer. Be our next Construction Inspector/Field Engineer.

Lead diagnosis and repair of complex mechanical, hydraulic, pneumatic, and limited electrical issues.

Temporary Maintenance Technician / Handyperson - Residential Buildings.We are looking for hands-on Temporary Maintenance Technicians / Handypersons to support residential buildings across New York City and Long Island based on coverage needs.This is an active, on-your-feet role focused on basic main

Job Title: Residential Property Handyperson.Rose Associates is a recognized market leader in multifamily and mixed-use real estate.Based in New York City, we own, develop and operate leading properties in urban markets from Philadelphia to Boston and across all residential asset classes, including m