Trabajos pipeline safety en Passaic, NJCrear alertas

Job Title: Cardiac Cath Lab Registered Nurse (RN) Location: Cooperman Barnabas Medical Ctr Department: Cardiac Catheter Lab Req#: 0000185464 Status: Full-Time Shift: Day Pay Range: $46.48 - $62.09 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: As a Cardiac Catheter Lab Registered Nurse (CCL RN), you will assist physicians and allied healthcare staff in performing a variety of diagnostic and interventional cardiac/endovascular, EP, Vascular and structural procedures. You will utilize knowledge of pathophysiology to ensure patients are prepared/educated/supported during procedures, whether monitoring, circulating, or assisting with scrub procedures. Cooperman Barnabas Medical Center (CBMC) Catheter Lab specializes in Cardiac Cath, vascular, neurovascular (stroke) and structural heart procedures, as well as electrophysiology. Procedures performed in the Cath lab include the following: left and right heart catheterizations along with percutaneous intervention as necessary, intracoronary ultrasound, rotational atherectomy, balloon pump insertion, Impella insertion, left atrial appendage closure, catheter-directed thrombolysis for pulmonary embolization, structural procedures (TAVR, Mitra Clip), neurovascular cerebral angiograms, stroke treatment, carotid stenting, treatment of cerebral aneurysms with coiling and pipeline interventions, peripheral and renal angiograms with intervention as necessary, Watchmen, CardioMEMs, and Electrophysiology (cardiac devices, ablations, PVI’s, laser lead extractions). Qualifications: • Cath Lab experience is strongly preferred., • A minimum of 2 years of critical care experience is required., • Telemetry experience required., • Strong critical thinking/assessment skills., • Must be I.V. certified from an approved facility or completion of requirements for I.V. certification within 90 days of hire to unit., • Completion of all Orientation requirements of Cooperman Barnabas Medical Center., • Current and active New Jersey RN licensure is required., • Baccalaureate Degree or Associate Degree in Nursing, • American Heart Association Basic Life Support Certification (BLS) upon hire, • Day Shift, 9A-10P, 12.5 Hr. Shift, 37.5 hours, • Full-Time, • The Registered Nurse provides nursing care in the health care system within the scope of practice defined by the Nurse Practice Act and regulatory standards and assures awareness of ethical standards of practice as defined by the ANA code of ethics., • The Registered Nurse assures safety in practice and is inclusive of the principles of evidence-based practice by maintaining a realization of their own individual level of knowledge and experience and assumes responsibility for advancing knowledge of self and others in the patient care team by communication with and utilizing resource persons and programs available., • The Registered Nurse is responsible for reporting identified safety issues such as hazardous environments (i.e. damaged floors/walls/ceiling tiles/unsecured areas) and medical errors., • The Registered Nurse is responsible for knowledge of the patient population served., • The Registered Nurse is responsible for supervising and directing the delegation of tasks to appropriate team members and collaborates with other patient care providers., • The Registered Nurse is responsible for consistently setting and evaluating priorities through appropriate interventions with measurable outcomes toward improvement. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice. Benefits and Perks: • At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health., • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long-Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits RWJBarnabas Health is the premier healthcare destination providing patient-centered facilities, high-quality academic medicine in a compassionate and equitable manner, while delivering best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly have a unique impact on local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education.

Are you a motivated and experienced leader of a manufacturing facility with progressive experience in all aspects of design, assembly and machining of customized industrial products? VERSA Products Company, Inc. (VERSA), a global leader in the design and manufacturing of high-quality directional control valves and systems, is searching for a talented professional to join our team in Paramus, New Jersey. With over 75 years of innovation and excellence, we are committed to creating world-class solutions for industrial applications across the globe. As the Director of Manufacturing, you are responsible for overseeing all aspects of the Machine Shop, Assembly, Manufacturing Engineering, and Facilities ensuring that the staff and overall operations meet the required standards of service, quality, and cost. The Machine Shop is equipped with roughly 18 CNC Milling and Lathe machines ranging from 5 to 9 axis. With a strategic, yet hands-on approach, you drive operational excellence, employee development, enhanced productivity, and continued innovation. Identifying opportunities to further enhance automation and technological initiatives is crucial to assuring that our production activities remain cost competitive. Summary of essential job functions: • Develop and implement manufacturing strategies and processes, aligned with the company's overall objectives, to enhance production efficiency and cost effectiveness, on time delivery, and quality., • Lead, manage, and develop the Manufacturing Team to ensure a high-performance culture. Strong communication, team building, coaching and motivational skills are key., • Develop and manage the Plant and Facilities budget including costs related to labor, materials and equipment. Recommend equipment upgrades and replacements, and capital improvement projects, as required for facilities and Manufacturing areas., • Assure system for controlling tooling inventory and costs is in place and effective., • Collaborate with Engineering, Quality Assurance, Supply Chain, and other departments to integrate new products into production and ensure seamless product launches., • Drive continuous improvement initiatives, including Lean Manufacturing, Six Sigma, or other methodologies, to optimize production processes and reduce waste., • Ensure compliance with all relevant regulations, industry standards, and company policies related to health, safety, and environmental practices., • Monitor production KPIs and implement corrective actions when necessary to achieve targets., • Foster a culture of innovation and encourage the adoption of new technologies and practices to improve product quality and manufacturing efficiency., • This position includes all other responsibilities that may be necessary to fulfill the duties associated with the position or as may be assigned. Minimum requirements: • Bachelor’s degree in a relevant field required (Mechanical Engineering a plus)., • Proven expertise in project management, precision machining and CNC operations/programming with Esprit., • 10 or more years of manufacturing management experience, with at least 5 years in a senior management role., • Experience with scheduling in a small to medium batch size environment with extensive setups and prototyping., • Proficiency in relevant software, such as CAD/CAM, ERP systems, TDM, and Excel., • Strong organizational, problem-solving, analytical and decision-making skills., • Focus on assuring employee growth through internal and external training, thereby creating a talent pipeline for the future., • Strong interpersonal and communication skills with leadership of cross-functional teams are essential., • Hands-on experience developing, implementing, and working with formal business/manufacturing information systems., • Ability to work effectively in a fast-paced, dynamic environment and adapt to changing priorities.

Job DescriptionDescription: Stray Voltage Technician · Up to $25/hr · Monday - Friday, 7:00 to 4:00 pm potential for OT · Company Cell Phone Provided · Company Vehicle · Paid Training · Medical, Dental & Vision Insurance · 401k with company match · Voluntary Short/Long Term Disability · Life Insurance · 9 Paid Holidays · Accrued Vacation Time · Sick Time · $750 Referral Bonus Program · $100 Annual Boot Voucher · $100 Annual Rx Safety Eyewear Voucher Position Summary: This position in working in the 5 boroughs in the city and Westchester identifying electrical structures, testing them for potential stray voltage using a standard fluke multi-meter and high-density voltage detector. Employee will be required to read a utility strip map, drive to location, then walk the outlined coordinates.. Position requires the ability to walk approximately 3-7 miles daily. Time management skills and the ability to work independently are essential functions of this position. Upon successfully completion of training period employee will be promoted to a Level 1 Technician. Essential Job functions: · Visually examine manholes, pull boxes and service boxes. Some are located in / on sidewalks others are located in the road. standard fluke-multi meter and high-density voltage noting errant current, flaws in utility poles and other outlined criteria.· Adhere to safety standards as defined by PPS's safety standards and procedures.· Polite and Professional interactions with public.· Adhere to PPS dress code. Position Qualifications: · Effective Communication skills. · Ability to operate and navigate mapping functions on tablet · Ability to act with integrity and respect of personal or public property. · Ability to work in all types of weather. · Ability to report to jobsite daily and travel to a new location upon request at any time throughout local PPS service territories. (mileage plan reimbursement) · Ability to drive between 5 and 100 miles (approximately) daily in a responsible manner. Prerequisites: · Personal transportation available to and from job site. (mileage plan reimbursement) · Valid Driver’s License for at least one year · Ability to climb, balance, bend, stoop, squat, kneel, crouch, crawl, reach, push and/or pull, twist and make repetitive hand movements. Ability to load, carry, lift, push and/or pull objects weighing up to 50 pounds. Sitting or standing for prolonged period of time required. Must have the ability to safely operate a motorized vehicle. · Complies with all safety rules and regulations set forth by PPS · Pass and retain Operation Qualifications as set forth by the utility companies’ standards, employment is contingent on the passing of Operator Qualifications during training · If any required OQ is failed upon requalification, the employee will be responsible to schedule training and testing which will be on their own time. About Us: With Precision Pipeline Solutions in New Windsor, New York, you’ll be working for one of the nation’s fastest-growing private companies in the natural gas and electric utility contracting industry. Our mission at PPS is to be the premier provider of the development and implementation of single source, multi-dimensional, problem-solving techniques, driving the most effective SOLUTIONS to our utility clients. Our customers will choose us because of our diverse expertise, quality workmanship and reputation to provide the utmost degree of value. This job description is not intended to be all-inclusive. Employee may perform other related duties as delegated to meet the ongoing needs of PPS. Requirements:

Job Description Brimar Industries is seeking an experienced Head of Sales to lead and scale our omni-channel sales organization. The ideal candidate is a strategic leader with a proven track record of building high-performance sales teams, including SDR, inside sales, and account-based selling functions, while also growing revenue through indirect channels such as distributors, Amazon, and regional resellers. You will be a key driver in Brimar’s growth strategy, focused on maximizing the monetization of our existing funnel, improving engagement with high-value prospects and customers, and increasing revenue across all sales channels. Key Responsibilities: Sales Leadership & Strategy • Build, develop, and lead a scalable sales organization across SDR, Inside Sales, and Account-Based Selling., • Partner closely with Marketing and Customer Success to optimize lead-to-revenue conversion and customer retention. Team Building • Recruit, train, and mentor SDRs tasked with demand generation using Brimar’s extensive prospect database., • Build and manage an Inside Sales team focused on qualifying and closing inbound RFQs., • Establish a robust account management strategy to grow existing customer relationships into repeat, high-value engagements. Indirect & Channel Sales • Develop and execute strategy for indirect sales including:, • Distributors and reseller networks, • Lead Brimar’s Amazon strategy across Vendor Central, Seller Central, and FBA (Fulfilled by Amazon), and collaborate with external Amazon agency partners to execute daily operations and performance management., • Regional reseller reps and value-added partners, • Optimize partner programs, pricing models, and performance metrics to drive indirect channel growth. Execution & Metrics • Drive pipeline growth, forecasting accuracy, and quota attainment across all teams., • Implement best-in-class CRM and sales enablement processes and tools., • Use data and analytics to continuously improve sales effectiveness and customer engagement. Requirements • 10+ years of experience in B2B sales leadership roles, including building and scaling omni-channel sales organizations., • Demonstrated success in developing SDR and Inside Sales teams from the ground up., • Proven experience with account-based selling and customer lifecycle expansion., • Strong understanding of indirect sales models including distributors, eCommerce platforms (Amazon), and reseller relationships., • Ability to work onsite full-time in Garfield, NJ., • Excellent communication, coaching, and cross-functional collaboration skills. Preferred Qualifications • Experience in industrial safety, signage, traffic control, or related industries., • Familiarity with Hubspot or similar CRM platforms., • Experience scaling sales organizations in growth-stage or transformation-focused companies. Why Brimar? • Be part of a company with a powerful e-commerce foundation and significant untapped sales potential., • Join a leadership team committed to growth, innovation, and customer impact., • Make a real difference in helping customers solve important safety and compliance challenges.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Competitive salary, • Dental insurance, • Employee discounts, • Health insurance, • Opportunity for advancement, • Paid time off, • Training & development, • Vision insurance This is for the true rainmakers, the entrepreneurial spirits who thrive on autonomy and whose confidence is backed by a proven track record. If the idea of unlimited earning potential, tied directly to your performance without a safety net, excites you more than it intimidates you might be one of the rare individuals we seek. However, if the security of a base salary is essential, or if you doubt your ability to consistently generate significant results from day one, this path is not for you. Who We Are: We're Unblinded a movement empowering leaders and organizations globally. We offer proven frameworks that accelerate growth and deepen connection. This commission-only role is a strategic partnership for elite sales professionals who want complete control over their income and impact, leveraging our powerful brand and methodology. Who You Are: A Proven sales expert & Business Builder: You have a history of exceeding targets in high-ticket, commission-based environments. You don't just sell; you build relationships and create long-term value. Highly Autonomous & Resourceful: You excel without hand-holding, proactively identifying opportunities, crafting strategies, and overcoming obstacles. Master Communicator & Influencer: You articulate value propositions with exceptional clarity and build deep trust, navigating complex sales cycles with finesse. Financially Astute & Resilient: You understand the commission-only model and have the financial runway and mental fortitude to thrive in it. Intrinsically Motivated & Growth-Oriented: Your drive comes from within, fueled by a desire for mastery, impact, and uncapped success. You embrace continuous learning. What You'll Do: • Leverage your network and expertise to identify and engage high-potential prospects for Unblinded's programs (may involve both inbound qualification and outbound generation)., • Orchestrate the entire sales process, from initial contact through discovery, value demonstration, proposal, and closing agreements., • Master and embody Integrity-Based Human Influence in every interaction., • Build and nurture a robust pipeline, potentially developing strategic partnerships or referral networks., • Collaborate strategically with Unblinded leadership, accessing resources while driving your own results., • Take complete ownership of your performance and earnings. Why This Unique Partnership? Unlimited Earning Potential: Zero caps. Your income is a direct reflection of the value you create and the agreements you secure. Significant Residual Income: Build a growing, recurring revenue stream based on long-term client success. Maximum Autonomy: Define your own strategies, schedule, and approach within our ethical framework. Be your own boss, powered by our platform. Access to World-Class Training: Benefit from our intensive Integrity-Based Human Influence coaching to continuously sharpen your edge. Associate with a Premium Brand: Leverage Unblinded's reputation and transformative offerings to open doors and close deals. Profound Impact: Facilitate life-changing growth for clients while building your personal empire. Qualifications: • Extensive, documented track record of exceptional performance in commission-only or high-stakes B2B sales roles (e.g., high-ticket coaching, consulting, enterprise software)., • World-class negotiation, influence, and relationship-building skills., • Deep understanding of complex sales cycles and value-based selling., • Entrepreneurial mindset with outstanding self-discipline and resourcefulness., • Financial stability to support a commission-only ramp-up period. Apply Now and let's discuss building something extraordinary together.

Job Description This is a foundational entry-level sales position designed to kick-start your career in B2B sales. As a Sales Development Representative (SDR) at Brimar Industries, you will be on the front lines of our outbound sales efforts—engaging potential customers through phone, email, chat, and CRM outreach. Your mission is to identify prospects, personalize outreach, and guide early-stage buyers to a sales-qualified opportunity. This is a high-activity role where you’ll connect with dozens of customers per day, uncover needs, and help them find the right Brimar solutions. Key Responsibilities: Outbound Prospecting • Execute daily outbound activities targeting curated lead lists, online sign-ups, abandoned carts, and other digital engagement sources., • Call, email, and chat with dozens of prospects per day to introduce Brimar’s safety solutions and qualify interest., • Use HubSpot CRM to generate calling lists, enroll leads into email sequences, track outcomes, and manage follow-ups., • Monitor website visitor behavior and cart abandonments to proactively engage warm leads., • Nurture leads through the early buying stages, conducting discovery to understand customer needs and qualifying potential., • Maintain consistent messaging and process discipline while tailoring communications to individual customer needs., • Receive ongoing coaching and participate in regular training to improve product knowledge, communication skills, and sales performance., • 0-2 years of experience in sales, customer service, or related business environments., • High energy, self-driven, and exited to pursue a career in sales, • Strong phone presence and the ability to think on your feet during live conversations., • Excellent written communication skills, especially in email., • Familiarity with or willingness to learn CRM systems (HubSpot preferred), email sequencing tools (like Outreach), and live chat platforms., • Detail-oriented and able to manage many active tasks without losing focus or follow-up., • Bachelor’s degree or equivalent experience., • Preferred experience with eCommerce, B2B products, or technical sales is a plus., • Interest in industrial safety, hardware, or compliance-driven product categories preferred. What We Offer • A clear path for professional growth into Inside Sales, Account Executive, or Sales Ops roles., • Training and mentorship from sales leadership and direct exposure to a high-performing commercial team., • A collaborative, hands-on work environment where your input makes a difference.

Job Description SUMMARY The Senior Manager of Quality Assurance (QA) serves as a key contributor to the Milling and Ingredient Solutions Business Unit (MIS BU) and is responsible for assisting in the development and supporting the execution of strategic direction for the Quality Assurance area in alignment with Business Unit objectives, with shared accountability for business results and financial targets. This role also serves as a member of the Corporate Quality Assurance (CQA) team, and in that capacity, is responsible for the overall Food Safety and Quality Assurance programs at MIS sites to deliver a finished product that meets or exceeds the requirements of Bay State Milling Company, Regulatory Authorities, Customer expectations, and Industry standards. This includes standardization of QA protocols and product specifications across sites, deepening knowledge of supplier programs and practices, consistency in establishment of testing schedules and auditing, as well as evaluation of laboratory capabilities and resource needs. The Senior Manager QA – MIS partners with the plant managers in respective region (East or West) to provide direction, coaching, training, skill development, and input on performance evaluations for each location’s QA Manager and their teams. A key requirement for successful execution of this role is working collaboratively within the function to stay abreast of BSM, regulatory, customer, and industry standards and working cross-functionally to understand all perspectives relative to business decisions. The Senior Manager serves as a technical expert for Wheat Flour and/or Seed and Grain products as well as supply chains to external and internal customers. This role supports the QA Director in the establishment of performance standards and holds responsibility to implement policy across the assigned sites to ensure a consistent customer experience and to continuously improve quality assurance programs. Further, the Senior Manager QA ensures facility teams are prepared to execute against all applicable certifications including organic, kosher, Global Food Safety Initiative (GFSI), and Non GMO Project Verification. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Perform all tasks safely and efficiently. Quality/Food Safety • This position is responsible for monitoring and improving the overall Food Safety and Quality programs at assigned sites. This includes standardization of QA protocols, testing schedules, and product specifications across sites., • Responsible for establishing and improving protocols at all sites in respective region to evaluate inbound raw materials and packaging materials, as well as in-process and outbound products, • Guide QA managers as needed through root cause investigation and CAPA setting in case of quality deviations, • Has the authority to make ship/no ship decisions in case of quality events., • Stays abreast of relevant food safety and quality standards through participation in industry associations, training, and engagement with internal and external experts., • In conjunction with the Director of QA, establishes and executes on food safety and quality policies across applicable facilities to ensure compliance with company, regulatory, customer and industry standards., • Complete and successfully prepare for audits for compliance against BSM and industry standards.., • Collaborates with other business units in sharing of best practices, policies and procedures to ensure alignment Company wide., • Leverages Cultivating Excellence activities to drive continuous improvement of programs. This includes actively leading or participating in Corporate QA (incl CE) projects when business needs arise., • Provides technical direction regarding EMP development and monitoring, equipment cleaning and sanitizing, and employee practices. Provides guidance or direction as needed to plant QA teams to address any non-conformances., • Develops, monitors, and reports on key metrics to Wheat Flour or S&G tactical leadership and Director of QA., • Ensures plant teams receive sufficient direction, training and resources to consistently execute quality programs and successfully complete relevant certifications, including organic, kosher, gluten free, Global Food Safety Initiative (GFSI), and Non GMO Project Verification. Pipeline Management • Supports risk assessments of ingredients and vendors in alignment with Food Safety Modernization Act requirements. Provides follow up as necessary., • Partnering with respective QA manager(s) and Supply Chain peers, evaluates supplier performance trends and makes recommendations for improvement, teaming up with suppliers as needed to address gaps., • Serves as a key technical resource regarding Wheat Flour and/or Seed and Grain (S&G) products and supply chains to external and internal customers., • Partners with supply chain and provides direction to QA teams at assigned sites regarding management of relevant supply chains. Customer • Reviews customer specifications and provides input to Sales and the Customer., • Evaluates Cultivating Excellence Relationship Tool to identify trends in internal incidents, vendor incidents, and customer complaints. Reports on performance and leads teams to investigate and prevent future recurrences., • Actively seeks opportunities to engage and build proactive, trust-based relationships with customers. Plant/Business Unit • Provides input to establish and execute business plans for both CQA and the MIS business BU., • Serves as a key member of the CQA and potentially one of the tactical MIS Leadership teams with responsibility for tactical execution of the business, and cross-functional collaboration to deliver on identified business results and financial targets. Leads initiatives to deliver against objectives., • Ensure Quality team has adequate ERP support through a network of Quality AX / D365 SME’s; provide input to needed enhancements to increase team effectiveness and efficiency. Technical Service • Develops and demonstrates an understanding of how our customers utilize BSM products., • Serve as the first point of contact for non-routine customer inquiries and questions relating to food safety and quality of products at assigned Wheat Flour locations. Ensure technical assistance to customers as requested. Partner with Technical Services to provide troubleshooting support when necessary for plants or customers., • Support Sales teams with technical understanding of products for customer and business development. Supervisory Responsibilities • Directly supervises the QA Managers at the assigned locations. In this capacity, establishes annual objectives, provides coaching, supervision, performance evaluations, and develops training and skill enhancement plans for employees., • Assesses talent needs and makes recommendations as appropriate., • Encouraged to actively seek out and lead cost savings or, on the other hand, evaluate technical QA investment opportunities for applicable sites on a regular basis. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION AND EXPERIENCE • Bachelor’s Degree in Food Science, Cereal Science, Biology, Chemistry, Milling Science or equivalent., • Minimum of 8 years of experience in Manufacturing QA required., • 5 or more years of previous Supervisory or Management experience required, • Green Belt certification in Lean/Six Sigma preferred., • Laboratory experience preferred, • Experience in the grain business will be taken into consideration on a case-by-case basis. LANGUAGE SKILLS Capable of following and communicating written and verbal instructions in English. Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write in English and complete reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, customers, and top management, public groups, and/or boards of directors. MATHEMATICAL SKILLS Must have the ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals, as well as, ability to compute rates and percentages. OTHER SKILLS AND ABILITIES Delineation of Accept/Reject Decisions: The Sr. Manager - QA has the authority to enforce all Corporate QA Standards. If an employee is in disagreement with her/his decision, the Director of QA will be consulted. If there is still a disagreement, a joint decision will be made by Sr. Director of QA and the Milling and Ingredient (MIS) General Manager. If there is still not consensus, the final decision will be made by the President & CEO of BSM. CERTIFICATES, LICENSES, REGISTRATIONS Ability to utilize computer programs including e-mail, word processing, and spreadsheet applications such as Excel, and AX ERP system. In addition, the ability to review process and determine best approach or fix/solutions to increase efficiency in the role. SAFETY While performing the essential job functions, the employee is expected to work in a safe manner and follow company policies regarding safety. It is the expectation and responsibility of the employee to report any and all injuries immediately to the supervisor, and to report to supervision any safety situation that the employee feels is substandard and poses a risk for employee injury, property damage, or loss. TEAMWORK Must have team building skills; also, must have ability to work independently and cooperatively across functions. DEPENDABILITY Follows through on tasks; requires minimum supervision and follows instructions and procedures. Arrives at work on time; follows Company policies on vacations, leaves, etc. Observes Company rules; completes tasks within deadlines. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Willingness to cooperate with peers to accomplish work assignments and maintain effective working relationships; demonstrate respect and consideration for others' opinions; contribute to the overall task of the team. Will follow Company policies, procedures and work rules. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle or feel objects, tools, or controls; and talk or hear. Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust focus. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, use hands to figure, handle, or feel; reach with hands and arms; and talk and hear. Employee is frequently required to stand, walk, climb or balance, and must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and ability to focus. FOOD SAFETY/SECURITY REQUIREMENTS The company is committed to producing and delivering defect-free products. To ensure this, all employees are required to be trained on and adhere to the Good Manufacturing Policies set forth by the Company as they pertain to personnel practices, equipment, and facilities. It is also vital that all employees be aware of their work environment and prevents any accidental or intentional adulteration of products produced at this facility.

Job Description We are seeking a Lead Master Plumber to join our team! The selected individual will install and repair water supply lines and drainage systems, as well as commercial and industrial plumbing, pumps and motors, boiler and water heating systems. Responsibilities: • Assemble and install plumbing systems, • Troubleshoot and repair pipe and pipeline systems, • Review blueprints and building codes to determine optimal work procedures, • Maintain and repair septic and commercial sewer systems, • Prepare written work cost estimates for clients, • Previous experience in plumbing, maintenance, or other related field, • Ability to read blueprints and schematics, • Ability to handle physical workload, • Strong troubleshooting and critical thinking skills, • Excellent written and verbal communication skillsCompany DescriptionWe are a family owned business with great values and comfortable working conditions.We are a family owned business with great values and comfortable working conditions.

Job Description Brimar Industries is looking for a highly motivated and technically capable Inside Sales Representative to join our growing team. This role is essential to delivering a fast, professional, and solution-oriented experience to our existing customer base. The ideal candidate is an exceptional communicator, a confident negotiator, and an agile multitasker who thrives in a fast-paced, B2B sales environment. You will be responsible for responding to inbound requests for quotes (RFQs), guiding customers through technical product configurations, and building long-term relationships that turn one-time buyers into loyal customers. Key Responsibilities: Sales Execution • Respond promptly and professionally to inbound RFQs generated by marketing, ensuring rapid engagement with existing customers., • Provide consultative pre-sales support including technical product guidance, solution configuration, and use-case alignment., • Manage the full sales cycle from quote to close using HubSpot CRM and digital quote-to-order platforms., • Conduct discovery calls to understand customer needs, project requirements, and purchasing timelines., • Provide an outstanding customer experience with a solutions-focused, value-driven approach., • Demonstrate and grow technical product knowledge across Brimar’s portfolio of signage, labeling, and traffic control products., • Understand and communicate relevant industrial standards and certifications such as ANSI Z535, OSHA 1910.145, MUTCD (Manual on Uniform Traffic Control Devices), and NFPA (National Fire Protection Association)standards., • Maintain accurate records and sales activity within HubSpot CRM., • Work collaboratively with operations, product, and customer service teams to ensure seamless order fulfillment and post-sale support., • Identify and suggest improvements to tools, processes, or workflows that improve sales efficiency or customer satisfaction. Qualifications • 3+ years of inside sales experience in a comparable industry (e.g., industrial safety, hardware, tools, or technical B2B products)., • Proven experience selling physical products that require inventory coordination and meet regulatory certifications., • Proficiency with HubSpot CRM and digital quote-to-order platforms., • Strong discovery, qualification, and negotiation skills., • Comfortable managing multiple concurrent opportunities and follow-ups in a structured, organized manner., • Self-starter with strong drive for performance and continuous learning., • Passionate about delivering value and solving real-world safety challenges for customers., • Highly organized, detail-oriented, and able to thrive in a fast-paced sales environment. Preferred Qualifications • Knowledge of industrial safety regulations and product certifications (e.g., ANSI, OSHA, MUTCD, NFPA)., • Experience in B2B sales to government, institutional, or industrial buyers., • Familiarity with manufacturing lead times, logistics, and inventory-based sales cycles. Why Brimar? • Join a company at the forefront of safety and compliance solutions., • Be part of a dynamic, growing sales team with real opportunities for career advancement., • Work in a collaborative environment where your input is valued and your growth is supported.

Job Description About the job Company Overview Utilities One was founded with great aspirations to reshape the industry as we know it. Our mission as a company is to make a real impact for the greater good of the communities. Today, Utilities One delivers a full range of infrastructure solutions for Telecommunications providers, Electric, Water & Gas Utilities, Wireless Carriers, and the Technology Deployment sector. We care about safety requirements, customer expectations, and prompt delivery. We serve both civil and industrial infrastructure, leveraging the newest technologies, and out-of-the-box solutions. Our areas of expertise cover a wide variety of industries - adapting to their ever-changing standards is what we do best. We are currently seeking an enthusiastic and proactive Engineering Manager- Water Utility sector to join our dynamic and innovative team. The services provided by Utilities One encompass aspects related to water supply, sewer systems, and facilities. Water Supply and Distribution: • Water Distribution: Involves the delivery of potable water through pipelines to residential, commercial, and industrial users., • Water Infrastructure Installation: Encompasses the construction and setup of various components essential for water supply, including pipes, tanks, and meters., • System Maintenance: Regular upkeep and repairs of water supply systems to ensure continuous and safe water delivery., • Pipeline Construction: Building pipelines that form the network for water distribution., • Water Treatment Plant Construction: Establishing facilities that treat water to make it safe for consumption., • Pump Station Installation and Maintenance: Setting up and maintaining pump stations that help in moving water through the distribution system., • Hydraulic Engineering Services: Engineering services that deal with the flow and conveyance of water., • Water Quality Testing and Monitoring: Ensuring that the water meets health and safety standards through regular testing and monitoring., • Leak Detection and Repair: Identifying and fixing leaks in the water distribution system to prevent water loss and maintain system integrity.Sewer Systems:, • Directional Drilling: A method used for installing underground pipes and conduits, often used in sewer line installation without disturbing the surface.Facilities:, • Water Infrastructure Installation: Not only for water supply but also includes setting up related facilities like treatment plants and storage tanks., • Water Treatment Plant Construction: Establishing facilities dedicated to treating water before it is distributed., • Pump Station Installation and Maintenance: This also applies to sewer pump stations, which are facilities., • Hydraulic Engineering Services: These services can be relevant to both water and sewer systems in terms of facility design and function., • Environmental Impact Assessments: Assessments done for projects including water and sewer facilities to ensure they meet environmental standards and regulations. Responsibilities · Lead and manage complex engineering work involving the planning, design, and construction of a variety of utility water projects for municipal, industrial, and private clients. · Help lead and grow our water utilities while overseeing project execution. · Develop a long-term growth plan and conduct market analysis to identify opportunities. · Implement best practices, new technologies, and effective asset management to optimize operations. · Ensure compliance with regulations and promote sustainable water management practices. · Improve customer service and address concerns. · Develop risk management strategies and update emergency response plans. · Explore geographic expansion and diversify service offerings. · Enhance service quality, ensure sustainability, and drive company growth. · Evaluate the best method of research and then exercise appropriate judgment in setting priorities and resolving complex issues, considering the relative costs and benefits of potential actions to select the most appropriate one. · Develop a comprehensive P&L strategy for operations by gathering and analysing historical financial and operational data, optimizing revenue through pricing strategies, and identifying cost-saving opportunities. Requirements · 3+ years of experience in Civil or Environmental Engineering. · Water Utilities – Comprehensive knowledge of principles and theory of applied engineering, design, and construction related to water engineering. · Supervision – Thorough knowledge of leadership techniques, principles, and procedures to assign, schedule, supervise, train, and evaluate the work of assigned staff. · Project Management – Comprehensive knowledge of organizing, planning, coordinating, managing, and directing project functions. · Coordination of Work – Ability to plan and organize daily work routine. · Computer Skills – Very good technical background on engineering, design and construction. · Ability to work independently and as part of a team to perform the essential job functions in order to meet internal and external client expectations. · Interpersonal Relationships – Develop and maintain cooperative and professional relationship with colleagues, clients, and representatives from outside organizations. Benefits If it sounds like a great opportunity, look below to see what’s in it for you: • Competitive Payments;, • Career Advancement Opportunities;, • Paid Time Off;, • Health Insurance coverage;, • 401k plan;, • Whole Life Insurance.

Job Description Abacus Corporation is a family-owned leader in workforce and talent solutions with over 80 years of experience. We specialize in connecting skilled professionals with direct hire opportunities across industries like industrial, security, healthcare, finance and professional services. Known for our supportive culture and long-standing client partnerships, Abacus offers more than just a job—we provide a path to lasting career growth with trusted employers nationwide. Job Title: Recruiter – Light Industrial & Warehouse Staffing (Northern New Jersey) Location: Northern New Jersey Industry: Staffing & Recruiting Employment Type: Full-Time Language Requirement: Bilingual (English & Spanish required) Position Summary: We are seeking a motivated, community-driven Recruiter to join our staffing team in Northern New Jersey. This position plays a key role in connecting quality talent with employers in the light industrial and warehousing sectors. The ideal candidate is bilingual (English/Spanish), has local market knowledge, and maintains strong ties to the community. This is an excellent opportunity for someone who thrives in a fast-paced environment and is passionate about making an impact through workforce development. Key Responsibilities: * Talent Acquisition: * Source, screen, and interview candidates for temporary, temp-to-hire, and direct hire opportunities * Match qualified candidates with client job orders in warehouse, logistics, and light industrial environments * Maintain a strong candidate pipeline for high-volume staffing needs * Community Outreach: * Actively engage with local organizations, community centers, and job fairs to recruit talent and build relationships * Represent the agency at local events and workforce programs * Build trust and rapport with job seekers in underserved or bilingual communities * Client Support: * Work closely with account managers and market managers to understand client needs and staffing requirements * Ensure candidates are properly onboarded and meet job-specific qualifications * Provide post-placement support to ensure a positive candidate and client experience * Administrative Duties: * Maintain accurate records in the applicant tracking system (ATS) * Assist with compliance, onboarding paperwork, and background checks * Track and report on recruiting metrics and candidate progress Required Qualifications: * 1–3 years of recruiting experience, preferably in a staffing agency setting * Experience recruiting in light industrial, warehouse, or logistics sectors * Bilingual fluency in English and Spanish is required * Deep knowledge of Northern New Jersey communities and labor market * Excellent communication and relationship-building skills * Proficient with ATS, scheduling, and candidate tracking tools Preferred Qualifications: * Experience working with underserved or immigrant communities * Familiarity with E-Verify, I-9s, and workplace safety practices * Strong organizational and time management skills Why Join Us? * Competitive pay with opportunities for performance bonuses * Comprehensive benefits (medical, dental, vision, PTO) * Collaborative, mission-driven team * Opportunities for growth and advancement * The chance to make a meaningful difference in your local community Apply Now: If you're a passionate recruiter who understands the unique needs of Northern NJ communities and excels at matching talent with opportunity, we'd love to meet you! ?? Submit your resume and a brief note about why you're a great fit.

Job Description Job Title: Senior Sales Associate – Commercial Roofing Location: Delran, NJ Job Type: Full-Time Reports To: Sales Manager / Director of Sales Salary: Base + Commission (Commensurate with experience) About Us: Jottan, Inc is a leading provider of commercial roofing solutions, known for our commitment to quality, safety, and customer satisfaction. With decades of experience and a strong presence in the industry, we offer a wide range of roofing services including repair, maintenance, and full-system replacements for commercial and industrial clients. Job Summary: We are seeking a highly motivated and experienced Senior Sales Associate to join our team. This role is responsible for identifying, pursuing, and closing new business opportunities, managing key accounts, and driving revenue growth. The ideal candidate will bring deep industry knowledge, a strong sales track record, and the ability to consult with clients to provide tailored roofing solutions. Key Responsibilities: • Develop and maintain a strong pipeline of commercial roofing opportunities., • Identify and engage prospective clients through networking, cold calling, site visits, and referrals., • Conduct thorough site inspections to assess customer needs and develop accurate project scopes and proposals., • Prepare and deliver compelling sales presentations and bids to decision-makers., • Negotiate contracts and close sales while ensuring customer satisfaction., • Build and maintain long-term relationships with clients, contractors, architects, and property managers., • Collaborate with internal teams including estimators, project managers, and operations to ensure seamless project delivery., • Track sales activity and performance metrics using CRM software., • Minimum 5+ years of proven sales experience in commercial roofing or a related construction industry., • Demonstrated ability to meet or exceed sales targets and KPIs., • Excellent communication, negotiation, and presentation skills., • Self-motivated with a high level of integrity and professionalism., • Proficient with CRM tools and Microsoft Office Suite., • Strong knowledge of various commercial roofing systems (TPO, EPDM, PVC, BUR, Modified Bitumen, etc.)., • Bachelor's degree in Business, Construction Management, or a related field., • Competitive base salary + uncapped commission., • Health, dental, vision and life insurance., • 401(k) with company match, • Paid time off and holidays, • Ongoing training and professional development., • Supportive team culture and growth opportunities.Company DescriptionWe are an award winning commercial roofing company which has been operating successfully since 1974. Our expertise is focused on the installation and maintenance of all roofing systems used in the commercial, industrial and institutional roofing context. Our philosophy of ‘Doing It Right the First Time’ has earned us the reputation and recognition as the region’s leading commercial roofing contractors while our commitment to safety has earned us the distinction of being the safest roofer in New Jersey and in the top 1⁄2 percent in safety for all roofers in the region.We are an award winning commercial roofing company which has been operating successfully since 1974. Our expertise is focused on the installation and maintenance of all roofing systems used in the commercial, industrial and institutional roofing context. Our philosophy of ‘Doing It Right the First Time’ has earned us the reputation and recognition as the region’s leading commercial roofing contractors while our commitment to safety has earned us the distinction of being the safest roofer in New Jersey and in the top 1⁄2 percent in safety for all roofers in the region.