Trabajos process engineer en Commack, New YorkCrear alertas

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Civil Engineering Project Engineer and Project Manager – Land Development Nelson + Pope is seeking a qualified Project Engineer with 4+ years of experience and a Project Manager to work in the Land Development Department in our Melville, New York office for an immediate start. The work includes site/civil design and permitting for residential, multi-family, commercial, industrial and retail projects. Responsibilities/Top Skills/Qualifications: • design, permit and construction plans & specifications, • site planning, • grading and drainage, • knowledge of local permitting agencies and regulations a benefit, • client & contractor coordination, • AutoCAD / Civil3D, • proficient in Microsoft Office, • good verbal communication, written communication, and organizational skills Management Responsibilities/Qualifications: • management and training of staff, • billing / collections, • proposals, • NYS PE license preferred Nelson + Pope offers a competitive salary commensurate with level of education and professional experience and offers strong health, paid time off, work life balance, 401K, and other benefits. Extensive learning and educational work environment with strong day to day mentorship as well as formal training opportunities. Candidates must have a valid driver’s license and be willing and able to commute to our Melville office for this on-site position (non-remote). Non-local candidates are encouraged to apply and relocation assistance may be available where appropriate. The interview process is succinct. Nelson + Pope is proud to be an Equal Opportunity and Affirmative Action Employer. We evaluate qualified applicants without regard to race, color, national origin, religion, sex, sexual orientation, gender identity, disability, protected veteran status, and other statuses protected by law. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.S. citizens and aliens lawfully authorized to work in the United States (if the position is or will be one which is subject to U.S. law). Verification of employment eligibility will be required at the time of hire. Salary Range: $80K to $160K

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Presidio, Where Teamwork and Innovation Shape the Future AtPresidio, we're at the forefront of a global technology revolution, transforming industries throughcutting-edge digital solutions and next-generation AI. We empower businesses-and their customers-to achieve more through innovation, automation, and intelligent insights. The Role Presidio is seeking a Network Engineer to join our team to support our client base. This individual will lead small to large projects on their own or as part of a team, which includes planning, design, and implementation of complex network and security engagements. This is a consultative role providing network engineering services on project work and effectively managing the implementation process from design to customer acceptance. Travel Requirements: In this role you will be expected to travel up to 25%. Key Responsibilities: • Primary responsibilities include performing project-based engineering, design, staging, installation, validation, testing, and troubleshooting of data/security networks, • Lead complex, large scale Network and Security projects, • Create low-level detailed designs that align with the business strategy, the customer's budget, and operational support capabilities., • Network discoveries, • Perform Network and Security Assessments, • Presenting documentation and engagement deliverables to customers, • Collaborating as part of a multi-functional team with Sales, Pre-Sales, Project Management, and other delivery/engineering resources, • Trouble resolution of complex issues and assisting team members in solving problems with their deployments., • Working with junior members of the engineering team to successfully implement secure network solutions, • Experienced expert with complex multi-protocol routing and switching solutions, • Various security parameters and harden access to devices, • Core Routing and Switching platforms with a focus on design, configuration, and troubleshooting using Cisco Best Practices, • Network design and applications, including designing IP addressing, • OSPF, BGP, EIGRP. Redistribution of protocols and loop prevention, • TCP/IP protocol stack, TCP/IP headers and packets, the OSI model, and commonly used TCP/UDP ports and associated services, • Cloud Networking Experience, • AWS, Azure, GCP in Networking context, • Aviatrix, • Experienced deploying at least one SDWAN Solution with Viptela, Silverpeak, or Palo Prisma SDWAN, • Experienced in implementing security solutions such as:, • Palo Alto Networks Product Portfolio, • Panorama, • Prisma Access, • Prisma Cloud, • Cisco Security Product Portfolio, • FirePower / FTD Firewalls, Meraki MX: Configuration, tuning, troubleshooting, • FMC Management, • Strong level in routing and switching troubleshooting, • Solid verbal and written communication skills, • Bachelor's Degree or equivalent experience and/or military experience, • Fortinet Product Portfolio, • Fortigate FWs, FortiManager/FortiAnalyzer, • Arista Networking solutions, including CloudVision, • Aruba Product Suite, • Experience with Aruba CX and Aruba OS software, • VSX and VSF technologies, • High availability configurations, • Automation / Scripting: Python, EMM and TCL, • Active Cisco certification; CCNP, CCIE Preferred Ready to innovate? Let's redefine what's next-together. About Presidio Presidio is committed to hiring the most qualified candidates to join our amazing culture. We aim to attract and hire top talent from all backgrounds, including underrepresented and marginalized communities. We encourage women, people of color, people with disabilities, and veterans to apply for open roles at Presidio. Diversity of skills and thought is a key component to our business success. At Presidio, speed and quality meet technology and innovation. Presidio is a trusted ally for organizations across industries with a decades-long history of building traditional IT foundations and deep expertise in AI and automation, security, networking, digital transformation, and cloud computing. Presidio fills gaps, removes hurdles, optimizes costs, and reduces risk. Presidio's expert technical team develops custom applications, provides managed services, enables actionable data insights and builds forward-thinking solutions that drive strategic outcomes for clients globally. For more information, visit ___ Applications will be accepted on a rolling basis. Presidio is an Equal Opportunity / Affirmative Action Employer / VEVRAA Federal Contractor. All qualified candidates will receive consideration for this position regardless of race, color, creed, religion, national origin, age, sex, citizenship, ethnicity, veteran status, marital status, disability, sexual orientation, gender identification or any other characteristic protected by applicable federal, state and local statutes, regulations and ordinances. To read more about discrimination protections under Federal Law, please visit: ___ If you have any difficulty using our online system and need an accommodation in the job application process due to a disability, please send an email to ___ for assistance. Presidio is a VEVRAA Federal Contractor requesting priority referrals of protected veterans for its openings. State Employment Services, please provide priority referrals to ___. Notice to Massachusetts Candidates: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Recruitment Agencies, Please Note: Presidio does not accept unsolicited agency resumes/CVs. Do not forward resumes/CVs to our careers email address, Presidio employees or any other means. Presidio is not responsible for any fees related to unsolicited resumes/CVs. #LI-AV1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $125,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: \n • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost.\n, • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements.\n, • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches.\n, • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements.\n, • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation.\n, • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection.\n, • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis.\n, • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred.\n, • Extensive experience reading and interpreting complex technical drawings and specifications.\n, • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software.\n, • Deep understanding of mechanical and electronic assembly principles.\n, • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook.\n, • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail.\n, • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry).\n, • Familiarity with manufacturing standards, process documentation, and ERP systems.\n Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Summary \n The Manufacturing Engineer 2 is responsible for the breakdown and definition of the labor effort required in accordance with Engineering and Quality Assurance specifications. \n Essential Functions \n\n • Compute cost estimates for new designs, and new customer designs, including established designs to reflect current goals and cost. \n, • Prepare detailed plan-schedule, estimates, and requisitions for special tooling and/or test equipment needed to manufacture and/or assemble parts to engineering requirements.\n, • Design and prepare tooling drawings such as drill, milling and assembly fixtures, punch and dies, etc. Prepare operation sheets for building assemblies. \n, • Make sketches as required to clarify fabricating or processing of parts, tools, or assemblies. \n, • Investigate shop problems with tools, parts or assemblies and applies the necessary corrective action with the affected work center. \n, • Coordinate with Engineering in the development of cost effectiveness and feasibility of new designs, as well as manufacturing and assembly methods. \n, • Incorporate engineering change orders to operation sheets. \n, • Liaison between manufacturing vendors and Purchasing Department. \n, • Prepare statements of work authorizing and guiding subcontractors in the fabrication of parts. \n, • Interface with subcontractors/customers in resolving manufacturing or drawing interpretation problems. \n, • Create and enter the Bill of Material and material code numbers in the Material Requirements Planning (MRP) system. \n, • Must be a U.S. Citizen.\n, • Ability to read, write and speak English proficiently.\n, • High School Diploma, GED or Industry experience preferred. \n, • Medical Dental, Vision, \n, • Life Insurance, Long-Term Disability \n, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD)\n, • PTO (3 weeks accrued first year!) \n, • 10 Paid Holidays \n, • Flexible Spending Accounts\n, • 401(k) with matching\n, • Pet Insurance\n \n \tFor more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

EnerSys Advanced Systems (EAS) is a specialized division of EnerSys-a global leader in stored energy solutions for industrial applications. EAS focuses on cutting-edge energy solutions for the aerospace, defense, and medical industries. As we continue to grow, we're looking for individuals who share a passion for these industries and want to be part of an innovative, dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: • \nGenerous Time Off - 3+ weeks of paid time off, plus 11 paid holidays, • \nComprehensive Benefits - Medical, dental, and vision coverage for employees and dependents at a discounted rate, • \nFinancial & Career Growth - Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan, • \n401(k) Matching - 100% match at a 6% contribution level, • \nInnovative Culture - We value excellence, teamwork, and long-term relationships with stakeholders, colleagues, and customers. Through innovative technology and ongoing training, we invest in our employees' skills and career development.At EAS, we don't just build batteries - we power systems and devices that protect not only individual citizens but communities across the world. If you're excited about working in an innovative, fast-paced, high-tech environment, where your contributions make a real impact, we'd love to hear from you! Compensation Range: $75,000 to $90,000 per year. Compensation may vary based on applicant's work experience, education level, skill set. Learn More About EAS Job Purpose The Manufacturing Engineer at Bren-Tronics, part of EnerSys is responsible for supporting production operations through process implementation and improvement, documentation, equipment optimization, and ensuring product quality and safety. This role works closely with operations, quality, engineering, and supply chain teams to improve efficiency, reduce waste, and maintain compliance with internal and external standards. Essential Duties and Responsibilities • Develop, optimize, and maintain manufacturing processes to improve efficiency, quality, and throughput., • Support day to day production activities by troubleshooting process issues and providing technical guidance., • Function as liaison between Manufacturing and Engineering to smoothly transition newly designed products to production., • Create and update work instructions, process documentation, and standard operating procedures., • Provide training to production operators to fully comply with work instructions, quality standards and engineering requirements, as needed., • Lead and support continuous improvement initiatives, including lean manufacturing and root cause analysis activities., • Design and implement tooling, fixtures, and equipment improvements to enhance production capability and operator safety., • Analyze production data to identify trends, process bottlenecks, and improvement opportunities., • Monitor rework and repair operations, consistently monitor and report yield issues, and regularly highlight significant findings., • Conduct failure analysis, identify root causes, and pursue effective solutions to minimize in-process defects., • Support equipment maintenance, calibration, and layout planning for efficient workflow., • 3+ years in Manufacturing Engineering role, defense Manufacturing industry, strongly preferred., • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field., • Understanding of lean manufacturing principles, quality systems, and process control., • Strong teamwork and collaboration with various groups both internal and external., • Excellent communication, written and verbal skills with cross functional teams., • Strong problem solving skills and ability to lead root cause and corrective action efforts. Know Your Rights Know Your Rights (Spanish) We use artificial intelligence to screen, assess and select applicants for open positions, including for the purposes of reviewing and ranking application materials and scoring answers to application questions. Accordingly, decisions about your application and eligibility for employment with EnerSys may be made based exclusively on the automated processing of the personal information that you submit in your application materials. Nearest Major Market: Long Island Nearest Secondary Market: New York CIty

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $72,800 - 93,600 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

The NPI Engineer develop solutions for product assembly, resolve product design/manufacturing challenges, and support new product introduction through the transition to production (TTP) process. Provides manufacturing engineering support for all activities in product development process. Focusing on

Job Description Are you ready to join an award-winning MSP recognized as one of the best places to work on Long Island? Techworks Consulting is seeking a talented and driven Solutions Engineer to support both new sales and account management teams in designing solutions, scoping projects, developing proposals, and ensuring technical accuracy during the sales process. If you thrive in a dynamic, hands-on environment, this on-site role in Ronkonkoma, NY could be the perfect opportunity for you! We'll Provide: • Robust benefits package including health insurance, dental, 401K, PTO, and holidays, • Salary range of $75,000-$95,000, • Opportunities for continued growth and learning, • Conduct technical discovery sessions for prospects and existing clients, • Create statements of work, project scopes, and bills of materials, • Present technical solutions when necessary, in a client-fiendly, business-focused manner, • Participate in sales calls and strategic planning meetings, • Moderate technical foundation in Microsoft 365, Azure, networking, cybersecurity, and virtualization, • Experience scoping technical projects, creating SOWs/BOMs, and presenting technical solutions, • Ability to explain complex technology in an easy to understand way, • Excellent communication, organization, and documentation skills, • Professional demeanor and ability to hold conversations with executive level decision makers Quick apply with your resume here OR Get a head start on our application and aptitude testing process here:

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job Description$104,400 - $150,000/year + bonus 1st Shift Permanent (Full Time) SUMMARY: A Senior Electrical Design Engineer who analyzes, designs, prototypes, tests, and supports complex analog and digital components, subsystems, and systems. You will develop new product capabilities and improve core products by applying engineering principles, producing robust, requirements-based designs, and supporting products through the full development lifecycle. Typical projects are diverse and technically challenging and will grow your domain expertise and organizational knowledge. Works within engineering and cross-functional teams within and/or across the business unit or division. May have regular customer/supplier interaction. PRIMARY FUNCTIONS: • Develops complex conceptual and detailed Analog and Digital designs by analyzing product performance and customer requirements., • Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Experience with microprocessor/microcontroller-based designs which include RAM, FLASH, ADCs, DACs, Supervisory ICs, Op-Amps/Signal Processing, Comparators, Serial Interfaces such as I2C, SPI, CAN, ARINC-429, Discrete Input/Output interfaces, etc., • Experience with requirement-based designs and using tools such as DOORS a plus., • Experience utilizing industry standard schematic entry tools such Dx Designer., • Capable of debug and support of new designs, production builds and field related issues., • Familiar with root cause and corrective action investigation tools., • Support product throughout the life cycle of development, including developing test procedures that ensure proper implementation of requirements., • Prepare for and conducts design reviews and various milestones throughout the product life cycle., • Develops complex conceptual and detailed design specifications by analyzing product performance and customer requirements. Investigates design factors such as function, performance, interchangeability, non-recurring and recurring cost, operational efficiency, and contractual requirements. Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Applies scientific analysis and mathematical models to predict and measure the outcome and consequence of design alternatives. Interprets and validates test results for accuracy and precision. Oversees and monitors product acceptance procedures and parameters to achieve customer and product reliability and safety standards (e.g. failure analysis). Utilizes and interprets predictive models to simulate and verify design concepts., • Completes technical project elements (e.g. preparation of product or system layout; defining system architecture; etc.) as assigned. Develops critical data and analysis necessary to present technical product and/or system proposals to customers., • Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; research customer data item requirements). Maintain efforts within defined cost and schedule constraints, including statusing and root cause/corrective actions of associated variances., • Reviews product specifications and/or modifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Troubleshoots design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team., • Provides technical information for review with product engineering teams applying consistent engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports., • Conducts complex analysis and devises tests to validate performance in the development of new products, methods, materials or processes. Completes required documentation, generates detailed reports, creates customer proposals and presentations and/or change proposals. Determines required actions, performs or directs completion of tasks, and publishes findings and/or results., • Compiles and analyzes operation, test, and research data, develop acceptance, engineering evaluation, development and qualification/certification test plans, procedures, and reports., • May communicate with customers to identify new business opportunities, present Parker product capabilities, and clarify customers’ technical requirements. May write technical proposals for customers by reviewing and interpreting specifications and requirements., • Mentors or serves as a resource to share specialized knowledge with others. Establishes goals and objectives and tracks performance required to complete projects., • Bachelor’s degree (BS) (or Professional Engineer (PE) certificate) in Electrical Engineering. Master’s degree (MS) preferred., • Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience., • Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise., • Demonstrated ability to investigate and implement new technologies., • Proficient with engineering design and analysis tools (e.g. DX Designer, PSpice/LTspice); ability to use standard software packages. May require capability using specialized software applications or languages., • Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives., • Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.

Job DescriptionJob Summary: The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelor’s degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 3–5 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopes Specialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job DescriptionGrass Valley is looking for an experienced Video/Broadcast Engineer to work embedded at one of our major global broadcast customers. The following job description is provided by our customer to describe the person they are looking for. This position will report on a day-to-day basis to the Engineering department of our customer, whose identity will be disclosed during the interview process. Primary Responsibilities This position is responsible for Research, Design, Documentation, Installation, Commissioning and Test of virtualized compressed IP-based video origination and distribution systems, along with related sub-systems for linear and streaming delivery via satellite and terrestrial fiber. • Responsible for end-to-end fulfillment of assigned projects and tasks, including installation, configuration and commissioning of video equipment and software applications., • Coordinates in-house and third-party resources to fulfill system integration tasks for documentation, fabrication and installation., • Experience in the design, build, and commissioning of technical systems for broadcast playout, distribution, and live streaming via IP., • Knowledge of baseband HD/SD video, compressed video/audio encoding, IP transport stream distribution, in-band and out-of-band metadata payloads, OTT streaming architecture, and IP networking principles including multicast., • Proven ability to test and qualify compressed video transport streams and compression technologies at the packet level, including MPEG-4 H.264, HEVC H.265, MPEG-2 and JPEG-2000., • Knowledge and experience in scripting, process automation, data acquisition, measurement and analysis tools, • Familiarity with video encryption and conditional access systems for content protection, broadcast and infrastructure monitoring and control systems, and Ethernet network topologies., • Familiarity with digital Ad Insertion systems, Targeted Advertisement signaling and video industry protocols such as SCTE-104 and SCTE-35., • Familiarity with industry developments in key technical areas of standardization and can articulate benefits/risks of various technology solutions., • Familiarity with Agile project management tools and techniques such as SCRUM and JIRA., • Demonstrates ability to manage assigned projects to tight timelines., • Demonstrates ability to perform technical analysis, exercise judgment, communicate with clarity and influence key technical decisions., • Possesses understanding of the modern video technology landscape including broadcast and streaming media., • Remains grounded in scientific method and objective analysis, representing a disciplined engineering approach at all times. 2PP3RSrd3V

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.