Trabajos process engineer en San Diego, CaliforniaCrear alertas

Assistant Engineer – Corrosion positions perform journey-level professional engineering work and may prepare engineering designs and specifications for corrosion control systems; prepare technical engineering studies; prepare bid documents; assist in data analysis; write routine reports and memos; perform field investigations and inspections; and perform other duties as assigned. NOTES: • Eligible benefitted employees originally hired on or after July 10, 2021, will be automatically enrolled in the San Diego City Employees Retirement System (SDCERS)., • Assistant Engineer – Corrosion employees with valid State of California registration as a Professional Civil, Corrosion, Electrical, or Mechanical Engineer or an Association for Materials Protection and Performance (AMPP formerly NACE) CP-4 certification are eligible for 31% additional pay., • Assistant Engineer – Corrosion employees who do not have a valid State of California Professional Engineer registration but have a valid Engineer-in-Training (EIT) certification that meets the requirements established by California's Department of Consumer Affairs, Board for Professional Engineers, Land Surveyors, and Geologists or an Association for Materials Protection and Performance (AMPP) CP-2 or CP-3 certification are eligible for 8% additional pay. The employee's eligibility for EIT certification pay will end when he or she achieves state registration or AMPP CP-4 certification., • Assistant Engineer – Corrosion employees may be required to work at heights in excess of 120 feet, wearing a full body fall restraint harness, walk in rough terrain, work in the presence of high voltage electricity, perform minor construction tasks and work in OSHA permit required confined spaces for extended periods of time. You must meet the following requirements on the date you apply, unless otherwise indicated. EDUCATION: You must meet ONE of the following options: • Bachelor's Degree in Civil, Electrical, or Mechanical Engineering or a closely related engineering field., • Engineer-in-Training (EIT) Certificate issued from a state licensing board., • Valid Association for Materials Protection and Performance (AMPP), CP-2 Technician certification. NOTE: HIGHLY DESIRABLE: • Valid Association for Materials Protection and Performance (AMPP), CP-2 Technician, CP-3 Technologist, or CP-4 Cathodic Protection Specialist certification., • Proof of degree/transcripts, certificate, or registration, if utilized to meet the minimum requirements. Please ensure all information is complete and accurate as the responses you provide on the supplemental questions will be reviewed using an automated evaluation system. If you are successful in this initial screening process, your application will be reviewed for applicable education, experience, and/or training to ensure all minimum requirements have been met. Successful candidates will be placed on a list which will be used to fill position vacancies during the next six months (180 days). For each vacancy, only those candidates with the most appropriate qualifications will be contacted by the hiring department for an interview. PRE-EMPLOYMENT REQUIREMENTS: Employment offers are conditional pending the results of all screening processes applicable to this position, which may include the following: confirmation of citizenship or legal right to work in the United States; completion of a pre-employment medical review and exam (which may include drug and alcohol testing); reference checks; and fingerprinting. Fingerprints will be submitted to the Federal Bureau of Investigation and the California Department of Justice for a conviction record report. Certain positions may require additional screening processes, including a polygraph examination and/or background investigation. All screening processes must be successfully completed before employment begins. A positive test result for alcohol, cannabis/marijuana, illegal drugs, or inadequately explained prescription drugs, or misrepresentation, falsification, or omission of pertinent facts in any step of the screening or selection process, may constitute cause for disqualification or termination of employment. Nothing in this job posting constitutes an express or implied contract for employment with the City of San Diego. Candidates must notify the Personnel Department of any change in their name, mailing address, email address, or phone number, otherwise they may miss employment opportunities Rev. 11 – September 5, 2025 (New Recruitment Date) Compensation details: 48.18-58.03 Hourly Wage PI3fcebc1b2903-25405-38536103

Job Description The Maintenance Technician ensures the integrity of building systems by performing routine maintenance and minor repairs while supporting the efficient operation of equipment. This role provides hands-on support for general maintenance tasks under the supervision of the Chief Engineer or Assistant Chief Engineer. Hours are 8:30am - 5pm, 3 days a week. Essential Duties and Responsibilities: • Perform repairs in restroom facilities, including toilets and soap dispensers; clear drains using plungers and handheld augers., • Conduct general labor tasks, such as carrying, stacking, and sorting materials; debris removal., • Safely use employer-provided vehicles to travel for parts and supplies, adhering to all traffic laws., • Maintain and/or replace door hardware; handle minor furniture repairs and floor maintenance; and conduct basic painting tasks in equipment rooms; and perform general cleaning in mechanical spaces., • Perform maintenance tasks as assigned; conduct cleaning and inspections of engineering areas, mechanical spaces, and equipment., • Replace lamps, air filters, ceiling tiles, and fire extinguishers., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards; participate in safety audits., • Communicate verbally and in writing with teammates, leadership team, vendors, tenants, and client employees in a professional manner, keeping the appropriate customer(s) informed/updated as needed., • Interact with tenants, engineers, and contractors while carrying out maintenance tasks., • Follow safety protocols and use PPE for all tasks; ensure compliance with OSHA, NEC, NFC, NFPA regulations at all properties; promote safe working environments by reporting hazards and participating in safety audits., • HS Diploma or GED required, • Technical or vocational training, and/or 1-2 years of on-the-job training in one or more of the following areas: HVAC, electrical, mechanical, process controls, or plumbing, • Basic working knowledge of laptop and phone applications for work order and facility operation systems as well as basic skills with Microsoft Outlook, • Possess engineering and trade licenses required according to local, state, or national requirements, • Familiar with fire/life safety equipment/procedures, • Proven track record of delivering excellent internal and external customer service; ability to successfully interact/communicate with tenants/vendors/contractors as well as teammates and leadership team, • Familiarity with blueprints and code requirements, • Ability to work after hours, weekends, holidays, and during emergency situations as necessary to meet the needs of the client, • Possess competent knowledge of use and care of tools, • Ability to read and write English in order to understand manuals and procedures, and write reports. Ability to stand, walk, climb ladders, and lift up to 50 pounds; perform physically demanding tasks such as stooping, crouching, and kneeling. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is 100% in-office. The role requires working in office during standard business hours. Remote work or telecommuting is not an option for this position. #IND123 Pay Range$22—$22 USD Over its 40 year history, Trigild has managed and operated hundreds of commercial properties. Trigild has expertise in managing a wide array of commercial real estate assets and operating businesses. Trigild leverages its expertise in property management, receivership, fiduciary, operations, consulting, and disposition services under one roof – for maximum service and value. Visit . Our portfolio includes Hotels, Multifamily Complexes, Office Buildings and Hospitality Properties (including restaurants, golf courses, amusement parks). Additionally, Trigild is the nationally recognized authority on non-performing commercial loans that combines Receivership/Trustee, Management and Disposition services under one roof. That means no coordinating multiple companies, and no duplication of fees. We have the expertise to quickly take control of the assets, maximize operating results, and speed recovery by selling the assets quickly through our national network of industry contacts. . Whether you are looking for commercial management services or a new level of performance on commercial loan recovery, Trigild can maximize value. All job offers are contingent on completion of a background check and proof of eligibility to work in the United States. Trigild does not accept unsolicited resumes from third-party recruiters unless they were contractually engaged by Trigild to provide candidates for a specified opening. Any such employment agency, person or entity that submits an unsolicited resume does so with the acknowledgement and agreement that Trigild will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. At this time, we are not working with any agencies.

TrellisWare launched in 2000 with an innovative culture striving to push technological boundaries in the area of wireless communications. We are now a worldwide leader in highly advanced algorithms, waveforms, and communications systems that range from small form factor radio products to fully integrated solutions. At TrellisWare, we connect passion with purpose and together we make an impact- on our careers, our company, and the world. And you can too. If you love to innovate and collaborate amid chaos and change, you belong at TrellisWare. Where the opportunity to serve is not a challenge but a gift. Where you're never going alone. Because there's too much at stake to go solo. Our Product Validation Team is seeking an onsite Product Validation Test Engineer. You would be responsible for working in our Product Test lab verifying and validating the latest advanced radio systems with emulators and test equipment. You will support challenging and exciting lab and field test tasks benchmarking the performance of the product in both emulated and real-world environments. You will deep dive into more challenging technical debugging and problem solving with SW and HW developers and product systems engineers. You will work on multiple product and technology development programs focusing on SW/HW design integration, verification, and validation. You will be responsible for specifying, designing, planning, reporting, and testing in the lab and field test environments. Enhancing cohesiveness and maintaining team morale is a responsibility of all our team members, as is the ambition for self-improvement and talent development. Through this dedication to unity and professional advancement, each team member is directly impacting the successful outcome of TrellisWare's deliverables and setting the tone for our core values of delivering excellence, pushing boundaries, and empowering people. The essential duties and responsibilities include: Test, Evaluate and Analyze SW/HW integrated wireless communication systems. Focus on product level validation testing. Summarize field test data and drive test reporting reviews to team leaders. Support systems engineering of TrellisWare proprietary technologies and standards to design, document, and execute test cases. Execution of field interoperability and performance validation testing in both mobile and stationary environments. Top level log analysis, debugging and troubleshooting of field functional and performance issues. Responsible for debugging field failures and anomalies via log analysis and issue reproducibility. Assessment of performance benchmarking to competitor/reference devices. Provide technical analysis to ensure compliance. Provide coaching, knowledge sharing, and competence building to Field Test team members. Contribute to process improvement and planning for the Field Test Team. Support test environment setup, configuration, and automation. Support Product Test Lab inventory control and management. Travel up to 25%. Mostly domestic and local to San Diego. Coordinate Engineering support and triage for field issues reported by the Field Application Engineers and Sales Team. Develops relationships with team members built on trust and respect. Education and work experience requirements are: BSEE/BSCE or equivalent military experience in Telecommunication/Wireless Communications, Digital Signal Processing, Tactical Radio Communications 3+ Years of relevant test experience. 2+ Year of wireless communications experience. To be considered for this position, you would need to meet, at a minimum, the knowledge, skills, and abilities listed here: Fundamental knowledge of RF Technology, Radio Design and RF Test Equipment. Knowledge and experience with calculation of rf propagation and field testing of wireless radio transceivers. Experience with networking (OSI layer 3 and 4): UDP, TCP/IP networking and transport protocol Experience using test equipment such as spectrum analyzers, oscilloscopes, signal generators, radio emulators, network analyzers, rf switch matrixes, and multimeters. Knowledge of the OSI 7 layers model. Test case design, planning, preparation, and execution. roubleshooting techniques utilizing an analytical approach. Ability to use Windows, Linux GUI and command line tools for software installation and diagnostics. Technical Knowledge of wireless telecommunications and cellular radio systems standards (FDMA,TDMA). Detailed Oriented, Analytical, Problem Solving, Tolerance of Ambiguity, Strong Planning and Organizing. Able to understand design and customer requirements Strong collaborative drive and interpersonal skills. Strong initiative, proactive work ethic and prioritization skills. Trustable judgement and analytical problem-solving skills. Effective execution and decision making. Champion of change and promotes innovation. Strong written and verbal communication skills. You can think on your feet. You are analytical, pay attention to detail and are able to communicate your thought process both written and verbally. You thrive in a collaborative and team-oriented environment. You have a curiosity to know how things work and passion to learn. You want to know why something fails to work and the initiative to fix it. You are not easily discouraged when things get chaotic, design doesn't work as planned, and you have to prove whether the product is working right or not. It would be extra awesome if you had:Experience and/or knowledge of Mobile Ad-hoc Networked (MANET) radio, C4I, and military communications. Experience using networking troubleshooting tools: Wireshark, ICMP, SSH Experience programming VB.NET, Python, C. Experience with LINUX/UNIX command line interface. Experience with shell scripting or more advanced programming skills. Advanced experience with Microsoft Office Application (Word, Excel, etc...). Certifications such as MTA/MCSA, Linux+, Net+. The physical demands described here represent those that must be met in order to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable those with qualified disabilities. Able to frequently sit, stand, walk, use hands to fingers, handle or feel, reach within hands and arm's length, stoop, kneel, and crouch, talk and hear. Regularly required to sit for extended periods of time; frequently required to use office equipment such as PC, printer, telephone, etc. Able to regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Additional requirements are: U.S. Citizenship or Permanent Residency Note: Many of TrellisWare's positions require a security clearance or the ability to obtain one. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. TrellisWare Technologies pays competitively according to the market in an individual's geographic location, in addition to their qualifications and experience. The posted range is for individuals located in San Diego, CA area. The pay range for this position is $85,000-120,000 annually. Disclaimer - The above statements are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified. Nothing in the job description restricts the company's right to change, assign, or reassign duties and responsibilities at any time for any reason. #LI-Onsite For more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

Job Description Description Q Microwave, a leader in the precision RF manufacturing, design and manufacture of cutting-edge military and defense microwave solutions, is seeking a RF System Engineer to join our entrepreneurial, collaborative, and fast-paced team located in El Cajon, CA. Q Microwave is recognized for its advanced capabilities in RF filtering and custom RF subassemblies—technologies that require deep technical knowledge and a passion for precision. Our fully vertically integrated facility in San Diego enables close collaboration between design and manufacturing, ensuring unmatched quality and performance in RF product development. As a part of Amphenol's global network of over 130 business units, Q Microwave operates with the technical focus and agility of a specialized design center while leveraging the strength, stability, and resources of one of the world's largest interconnect solution providers. In this role, you will be at the forefront of new product development, leading cross-functional teams to define system architecture and drive products from concept to full-rate production. The position demands a strong technical foundation in RF systems and subsystems, the ability to dissect complex requirements into functional designs, and a proactive engagement with customers and internal stakeholders alike. Requirements Key Responsibilities: • Designing top-level system architectures that encompass RF amplification, high-performance filtering, antenna integration, digital/analog controls, power, and embedded firmware/software., • Generate block/flow diagrams, interconnection drawings (ICDs), electrical schematics., • Generate models or simulations aiding in predicted performance for the system or RF filter products., • Evaluate specifications and product design targets including customer requirements, testing procedures, and drawing packages., • Generate technical content for product design updates, new product introduction, and production proposals, including generating production readiness assessments and cost/technical proposals., • Lead a cross functional team of electrical, mechanical, manufacturing engineering to execute product development and production readiness., • Demonstrate ownership of the full electrical product lifecycle—from initial design through material selection, production support, and final delivery—while collaborating closely with cross-functional teams, executive leadership, and end customers to ensure technical excellence and on-time execution., • Problem solve production issues related to electrical, mechanical, materials, and manufacturing aspects in a high product mix production environment., • Assist in the design optimization of RF performance including circuit analysis and simulation, component, material, and process selection, PCB layout and mechanical packaging., • Team up with technicians and assemblers on test, tune, and debug of RF products to optimize performance. Minimum: • Bachelor's degree in a Electrical Engineering, RF, • Three - Five (3-5) years of working in an RF-product design, System engineering or RF production environment., • Experienced in working in a networked environment using a Windows and/or Windows-like interface including MS Office tools (PowerPoint, Excel, and Word) at an advanced level., • Familiarity with Engineering CAE/CAD tools such as LabView, AutoCAD, Solidworks, Cadence MWO, and Keysight ADS., • This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U.S. Government export license)., • Five (8) to Eight (10+) years experience., • Masters Degree in a Technical Field., • Active Security Clearance., • Background in Defense Industry., • Familiarity with component selection for high-reliability/aerospace/defense applications., • Excellent technical communication, documentation, and organizational skills., • Ability to lift 25–50 lbs. of test equipment with assistance., • Fast-paced environment with frequent interaction with supervisors., • Work in a collaborative environment with growth opportunities., • Be part of a supportive team focused on quality and efficiency., • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off This position is an excellent opportunity for motivated individuals who are ready to take the next step in their careers in manufacturing and production. Applicants must be U.S. citizens. Q Microwave is an Equal Opportunity Employer. Ready to take the next step in your career? Apply today!

Job DescriptionBenefits: • Paid Holidays, • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off Work Location: San Diego (near Otay Mesa East Port of Entry). Region: San Diego, CA Status: Full-time on-site. Opening: Immediate, September 2025 Project Overview: These positions will support the Otay Mesa East Port of Entry (OME POE) project under Caltrans District 11. The selected candidates will supplement Caltrans staff, providing office engineering support for contract administration, coordination with agency partners, and documentation of project activities. Position Description Summary Serve as Owner's representative. Office Engineer Key Responsibilities: • Support the Caltrans Resident Engineer with documentation, correspondence, and record management., • Prepare and track Contract Change Orders (CCOs), RFIs, Submittals, and Status of Contractors reports., • Coordinate with Caltrans functional units for submittal reviews, materials inspection, and contract change order processing., • Coordinate with SANDAG Construction Management and Public Information staff for project updates and issue resolution., • Coordinate with Caltrans Traffic Management Center (TMC) for review, approval, and updating contractor lane closure requests in the Lane Closure System (LCS)., • Coordinate with the California Highway Patrol for scheduling and managing Construction Zone Enhanced Enforcement Program (COZEEP) personnel., • Maintain project files, review daily reports, and manage Extra Work Bills., • A minimum of 5 years of experience on Caltrans District 11 and/or SANDAG CMGC projects in an office engineering capacity., • Knowledge of and experience with:, • SANDAG eBuilder CM software, CCO process, Construction Manual, weekly/monthly report formats, and Special Provisions., • Construction management software such as ProCore, PlanGrid, and Autodesk., • Strong computer skills, including Microsoft Office., • Ability to work independently and communicate effectively with multiple stakeholders., • Education/Licensure, • Option I: Graduation from a four-year ABET-accredited civil engineering program, • Option II: Possession of a valid Engineer-in-Training (EIT) certificate, • US Employment Authorization without needing sponsorship, • See Education/Training requirements, • Excellent written and oral communication skills, • A valid Drivers License and compliance with PACIFICs Vehicle Policy, • 3+ References from ClientsHardware/Software Knowledge, • Experience with Microsoft Office Suite software Word, Excel, PowerPoint, and Outlook., • Prevailing Wage Position

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware solutions with the right amount of engineering rigor? Are you seeking a technical role where you can take initiative? If so - we want to hear from you! Fuse is looking for a mid-level Mechanical Engineer to join our team onsite in San Diego, CA. We’re looking for a mechanical engineer that can balance discipline and attention to detail with outside-the-box thinking and an innovative problem-solving attitude. Must be a pragmatic and mission-driven self-starter. Apply your analytical and detail-oriented mindset to develop, own, and improve Fuse’s products for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Through a collaborative effort with the Electrical, Systems, and Production teams, this role will support Fuse Engineering to build communications, networking, and computing solutions for the warfighter. This is a mid-level role with great potential for growth. Warfighter-focused design and development is at the heart of Fuse processes. Throughout Fuse development our experienced team applies the best practices of commercial design-thinking, coupled to the DoD systems engineering framework. The coupling of commercially proven design with rigorous systems engineering gives Fuse an ability to rapidly design, develop and field solutions well inside of typical military design cycles. Fuse rapidly innovates, putting creative concepts into action and refining those concepts through hands-on testing, user evaluation, and iterations. What you'll do: • Implement mechanical systems, equipment, and packages for customers and internal programs that meet requirements and expectations, • Support, design, and develop dynamic tactical communications systems, • Mechanical design and development for sustaining engineering of our flagship and existing products including dynamic tactical communications systems, • Perform trade studies and participate in equipment selection, • Generate, review, and maintain mechanical drawings, bills of materials (BOMs), work instructions, and releasing of mechanical prints, • Interact with vendors to quote and produce mechanical parts and assemblies, • Participate in engineering/design reviews, • Conduct feasibility studies and testing on new and modified designs, • Support prototype and first article hardware builds, • Support integration between hardware, software, and network systems, • Conduct and support test planning, execution, and post-event reporting, • Interpret and research system interface documents in support of designing/defining/documenting how systems will interconnect, • Translate customer requirements into subsystem and system specifications, • Provide on-site and distance operational support, • Bachelor’s degree in Mechanical/Aerospace Engineering and 4+ years of experience, • Familiarity with Engineering Drawing Practices Y14.100 and Geometric Dimensioning and Tolerancing Y14.5, • Expert level of capability with Solidworks software including experience with eDrawings and Model Based Definition (MBD) of products and assemblies Y14.41, • Experience with fabrication methods for sheet metal and machined parts with part finishing (powder coat, anodize, Alodine, and plating), • Understanding of additive manufacturing processes and fabrication methods for sheet metal and machined parts, • Understanding of cable routing and its application in enclosures, • Must be a nimble self-starter who is excited about technology and can think out of the box and suggest powerful new ideas, • Experience working with production personnel and creating assembly instructions, • Strong technical, interpersonal, written and verbal skills, • Ability to operate effectively in a team environment as well as independently, • Demonstrate ownership and accountability of product designs, • Ability to obtain US SECRET Clearance Nice to have: • Experience with commercial and military documentation, • Experience with presenting technical data to small to medium sized external customer groups (both Technical and programmatic audiences), • Experience in design for TEMPEST, EMI MIL-STD-461, MIL-STD-810 (Environmental), MIL-HDBK-516 (Air Worthiness), ARINC 404, and/or ARINC 600 requirements, • Basic Electrical Engineering knowledge including manufacturing processes for Circuit Card Assemblies and grounding strategies, • Basic understanding of Configuration Management practices with experience with Solidworks PDM, • Experience with Solidworks Simulation analysis (or similar software) to include Structural Static/Fatigue, Thermal (Conduction and Convection) and Computational Flow/Fluid Dynamics (CFD), • Experience in designing routing cable assemblies using software-based tools such as Solidworks Electrical 3D and Schematics., • Experience in system design, testing, and analysis, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job DescriptionSalary: $150,000.00 - $180,000.00 negotiablee Job Title: WTA Lead Integration Engineer (Warfighter Tools Analytics) About Us: PMAT is an innovative small business founded with a passion for developing forward-leaning solutions from exceptional people that increase the mission's capability. We focus on designing and building impactful digital solutions that utilize modern cloud, data, and software concepts. Our passion is working on complex and progressive challenges such as edge platform computing, containerizing legacy platforms, distributed data platforms, or heterogeneous data analysis. We recruit, retain, and foster a team motivated to pursue passions, investigate new ways of doing things, and embody an innovative and entrepreneurial spirit. We believe in being curious about every element of a problem and experiment relentlessly. We foster continuous learning in an environment that encourages positive collaboration and expands our capabilities. We tap into collective intelligence, acknowledging that the most brilliant people may not be in the room. Above all else, we believe that delivering and demonstrating is more potent than a sheet of paper. We are passionate about mission-centric design and delivering effective capabilities to and for the warfighter. This position offers an opportunity to directly support Overmatch Engineering Support Services (ESS) in support of the Naval Operational Architecture with a specific focus on the Command and Control (C2) and Intelligence, Surveillance, and Reconnaissance (ISR) components. If you meet the qualifications and are passionate about supporting national security, we encourage you to apply. About the Role: PMAT has an ongoing need for Warfighter Tools Analytics (WTA) Lead Systems Engineers to provide comprehensive systems engineering and strategic planning for Battle Management Aids. This role focuses on Navy DevSecOps acquisition, process optimization, and implementation analysis. The successful candidate will ensure mission-support tools are developed with direct input from operational users, evaluated effectively, and continuously improved based on real-world feedback within the Navys capability development framework. Responsibilities: • Demonstrate expertise in Open Systems Architecture (OSA), Overmatch (OM), and NAVWAR Program Executive Office Command, Control, Communications, Computers, and Intelligence (PEO C4I) software development activities., • Perform troubleshooting, conduct cybersecurity reviews, support Risk Assessment and Issue Evaluation (RAISE), integrate applications, develop documentation, conduct software testing, and implement cross-domain solutions., • A minimum of 8 years of experience in software engineering., • Previous experience with Program Manager, Warfare (PMW) software projects., • Comprehensive understanding of Navy Warfighter Development Centers (WDCs) and their respective mission areas., • Familiarity with tools that support these mission areas is advantageous., • Proficient knowledge, skills, and abilities in technical program management, including cost, schedule, and performance aspects., • Experience in Navy acquisition support, particularly in digital transformation initiatives., • Demonstrated experience in engaging with fleet stakeholders across various domains, including DevSecOps, sustainment, procurement and installation, new construction, or Research, Development, Test, and Evaluation (RDT&E)., • Subject matter expertise in Navy Operational Architecture, encompassing tactical systems, data management, and operations., • Excellent communication skills., • U.S. Citizenship is required. PMAT is an equal-opportunity employer.We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture.We are committed to non-discrimination onanyprotectedbasis, such as disability and veteran status, or any other basis covered under applicable law.

Job Description About Indigenous Pact PBC, Inc: Established in 2017 Indigenous Pact PBC, Inc., a certified B-Corporation, set out on a mission to create health equity for American Indians and Alaskan Natives. As part of a global movement of certified B-Corporations, we aim to balance purpose and profit by meeting the highest social, environmental, legal, and public standards to build a more sustainable and inclusive economy. Indigenous Pact's dedicated, experienced, and knowledgeable team brings decades of experience working in Indian Country. We help strengthen and improve the sustainability of Tribes and Tribal Organizations' health, wellness, and long-term care programs and services. Indigenous Pact specializes in developing customized and turn-key solutions to generate sustainable revenue, increase healthcare access, and improve health outcomes for all Native Americans. Job Description • Job Title: Database Architect, • Base Salary: $57.00 - 67.00/per hour, • Location: USA, Remote, • Work model: 3-month Contract, • Travel Requirements: up to 10% As a Database Architect, you will play a critical role in leading the design and implementation of Indigenous Pact's enterprise data architecture and modern Azure Data Lake environment. You will architect solutions that enable secure, scalable, and high-performing data integration, warehousing, governance, and analytics across healthcare and Tribal systems. Your work will shape the foundation of our cloud-based data infrastructure—ensuring it meets performance, compliance (HIPAA), and business intelligence needs. This position is central to our long-term data strategy and modernization roadmap. Essential Job Functions: • Lead architecture of Indigenous Pact's Azure Data Lake Storage Gen2, including partitioning strategy and data zone design (raw, refined, curated, sandbox)., • Define data ingestion, transformation, and storage patterns, and other efficient data formats., • Develop and enforce data modeling standards, naming conventions, and metadata management strategies., • Collaborate with cross-functional stakeholders to identify, prioritize, and classify data entities for inclusion in the data lake., • Analyze existing data sources, APIs, and reporting tools to map data lineage, quality issues, and integration patterns., • Design scalable Azure Data Factory (ADF) pipelines, CDC strategies, and scheduling/orchestration workflows., • Define and document technical architecture, ETL specifications, capacity plans, and network/data security requirements., • Establish governance frameworks including data stewardship models, privacy and compliance controls (HIPAA, CCPA), and data quality standards., • Develop and manage strategies for data lifecycle, archiving, disaster recovery, and performance optimization., • Guide implementation of data dictionaries, business glossaries, and audit/compliance tracking systems., • Participate in stakeholder validation sessions, technical feasibility reviews, and trial data loads. Required Skills/Abilities: • Strong expertise in Microsoft Azure cloud data services: Azure Data Lake Storage Gen2, Azure Synapse, Azure SQL, Azure Data Factory., • Experience designing data lake architectures, data zones, and cloud-native ETL pipelines., • Proficiency in data modeling, schema design, and governance standards (e.g., master data, metadata)., • Familiarity with compliance frameworks (HIPAA, CCPA) and best practices in data security and auditing., • Ability to analyze complex integration scenarios, APIs, and legacy data structures., • Excellent written documentation and verbal communication skills for stakeholder engagement., • Scripting proficiency using PowerShell, Python, or similar automation tools., • Bachelor's degree in Computer Science, Information Systems, or a related field (or equivalent experience)., • 7+ years of progressive experience in data architecture or enterprise database design., • Hands-on experience with large-scale data environments and healthcare data preferred., • This position involves extended periods of computer-based work., • Remote position with core hours of 9:00 AM to 5:00 PM CST (flexible for time zones)., • You have a Growth Mindset: A belief that abilities can be developed along with a desire to be curious, learn & grow, • You take Initiative: Solve problems by thinking & taking action on solutions rather than waiting for direction, • You take Accountability: Follow through on commitments, take ownership & ensure timeliness, • You Give Back: Leverage your knowledge & expertise to make improvements around you, • You are Resilient: Work through challenges with optimism, agility & adaptability Building a strong culture and exhibiting our core values is important to us. When you join Indigenous Pact, you are joining a team that values: • Empathy is at the heart of everything we do—we listen, we understand, and we put ourselves in the shoes of others, whether it's our teammates, our clients, or the communities we serve., • Wisdom is about learning from experience, being thoughtful in our work and making decisions that are grounded in knowledge and insight. It's about taking the time to get things right., • Bravery is having the courage to take bold risks, challenging the status quo, and knowing that growth happens when we push our limits. Beyond the job opportunity and incredible culture we also offer: • A competitive total rewards package, including 401(k), Medical, Dental, and Vision insurance, • Open, transparent lines of communication with leadership, • Committed to giving back to improve our communities and environmental impact

Job Description Simplifying the Complex. Simplexity is a product development engineering firm, hired by leading technology companies to design their next generation products. In an industry of overly-complex design and production, we strive for simplicity, reducing product cost and improving reliability for our clients through our Product Development Process. Simplexity promotes an inclusive work environment with equitable opportunities for all employees. We believe collaboration is the key to innovation as ideas are shared across multidisciplinary platforms where diverse perspectives are always welcome. Simplexity has a firm belief that when individual parts are brought together, connected, and allowed to interact, an even better system with its own properties and processes emerges. We are seeking a Senior Electrical Design Engineer with new product development experience. The primary part of the job will be participating in the electrical design of new products. Specific technical responsibilities vary by project however it is imperative that you have command of all electrical engineering fundamentals and understand how they are applied to simple, reliable design. JOB DUTIES: • Exercise your engineering experience and skills to take initial design concepts from rough idea to complete, fully-working manufactured product., • Collaborate with a team of top mechanical, firmware, systems and software engineers for leading consumer and medical device companies., • Follow up the development of robust, testable product requirements with design of system architecture and selection of appropriate components., • Design the circuit schematic and complete or facilitate PCB layout., • Perform board bring-up and integration testing in collaboration with mechanical and firmware/software, • Write test procedures and assist in formal verification of design function., • Manage bills of materials and redesign for parts obsolescence or constrained supply chain., • Application of design principles for prevention of electromagnetic interference and assisting with certification to EMC standards., • Document every step of the design clearly and help to continuously improve engineering best practices., • Develop your skills and learn in a collaborative, process-driven environment.QUALIFICATIONS, • Bachelor’s of Science or Master’s of Science degree in Electrical Engineering or equivalent from an accredited four-year university., • 8+ years of experience., • Highly motivated with demonstrated ability to work independently with minimal supervision., • Ability to prioritize and plan effectively with a drive toward project completion., • Excellent organization and analytical skills combined with attention to detail., • Excellence in clear communications and detailed documentation., • A positive attitude and focus on client success., • Ethical and honest in every part of the job., • Works effectively in a team setting and collaborates openly with other engineers, • Proficiency with Altium tools., • Proficiency in both analog and digital design., • Experience developing microprocessor, FPGA or DSP-based systems., • Experience with power management systems, switching power supplies, and battery powered devices., • Experience with wireless communications components and standards., • Experience with sensor selection and interface design., • Experience in bringing products from concept to production., • Hands on lab experience with troubleshooting and debugging.PLUSES TO HAVE, • Robotics experience., • Technical project leadership of EE teams., • Hardware development for medical devices (including regulatory requirements) and experience working in a medical quality system., • FPGA design., • Power electronics design., • Antenna modeling and design., • Experience with Atlassian tools (Confluence, JIRA, Bitbucket)., • High speed digital design (e.g. PCI Express, memory bus design, Gigabit Ethernet, USB)., • Knowledge of motor drive and control, • Python programming experienceCOMPENSATION AND BENEFITS, • Base salary range: $130K - $160K, • Excellent Healthcare plan (Medical, Dental, and Vision) fully paid for by the company for the employee; partial payment for dependents, • 401(k) plan with company match, • Long-term and short-term disability, AD&D and Life Insurance, • Paid maternity/new parent leave, • 11 Paid holidays No recruiters please. Simplexity is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Diverse candidates are encouraged to apply. *** Please be advised that Simplexity Product Development will never ask you to respond to a non-SimplexityPD domain such as a gmail, ymail, hotmail, etc. If you suspect that you have been contacted by someone impersonating Simplexity Product Development who is using a fraudulent email address, please do not reply. If you are not sure, please fill out a contact form at to report the incident. *** Powered by JazzHR 2KEJ8KU6VK

Job Description Scope of Job PowerFlex, an EDF Renewables company, is a leading national provider of intelligent onsite energy solutions that support carbon-free electrification and transportation. The Company delivers integrated solar, storage, EV charging, and microgrid systems, to businesses and organizations. As a single full-service provider, PowerFlex customizes clean technology solutions to help clients achieve their energy and sustainability goals. Through the comprehensive PowerFlex X platform, PowerFlex leverages patented smart software to control, monitor, and optimize a client's distributed energy resources to reduce cost and maximize return on investment. The Project Engineer II will be responsible for providing technical support during the detailed engineering & construction stage of projects and will be exposed to all aspects of projects. Traveling on average once a week should be expected. Location This role would be supporting our projects in California and would be required to be a hybrid role out of one of our offices (Mountain View, CA, San Diego, CA or Los Angeles, CA.) Responsibilities * Design and engineer commercial and small utility-scale solar PV projects * Communicate with utilities on an ongoing basis * Stay up-to-date on code and policy changes that impact system design * Coordinate cadence with customer during design phase and construction phase * Coordinate design package with Engineering firms * Coordinate with vendors and lead procurement of materials * Perform inspections during the installation process * Oversee commissioning process * Assist in close out of projects with utility * Perform production analysis for PV systems * Assist Business Development team with pre-contract due diligence Qualifications Education/Experience * Bachelor’s Degree in Engineering (Civil or Electrical preferred) or related major * 2-3 years of experience * Excellent communication and organizational skills * Detail-oriented and strong analytical skills * Proficient in Helioscope, AutoCAD, PVSyst and Excel * Understands permitting & interconnection process * Basic understanding of financial modeling and incentive programs * Experience with Procore and Salesforce a plus * Computer Skills preferred: Salesforce, Microsoft Office applications, Microsoft Project knowledge, CRM, and Smartsheet Skills/Knowledge/Abilities * Ability to work independently, prioritize workload and deliver quality results on time while working on multiple projects simultaneously. * Plan and organize tasks to consistently produce results, with minimal supervision. * Acute attention to detail. * Strong organizational skills. * Commitment to excellence and high standards. * Excellent written and verbal communication skills. * Ability to deal effectively with a diversity of individuals at all organizational levels. * Ability to successfully resolve conflicts both internally and externally Compensation The pay range for this position is $73,800 - $123,000 annually. This position is eligible for PowerFlex's comprehensive Health and Welfare plans including but not limited to medical, dental, vision, 401(k) retirement plan and paid time off. The total compensation for this position may include an annual performance bonus (or other incentive compensation, as applicable). PowerFlex's compensation packages carefully consider a candidate's qualifications, experiences, and education in relation to the position. Physical Requirements Remaining in a seated position. Long hours on the computer keyboard. Prolonged periods of standing and/or walking. Must be able to lift and carry or otherwise move 25 pounds regularly/occasionally. Working Conditions 95% of time is spent in the office environment, utilizing computers (frequent use of various Microsoft software/programs), phones, and general office equipment. 5% of time is spent outside of the office visiting vendors’ and/or internal customers’ sites in addition to attending various conferences and meetings. Applicant Certification and Acknowledgment By submitting this application, you are certifying that all information provided is true and complete to the best of your knowledge. You understand that any false, misleading, or omitted information may disqualify you from consideration for employment or result in termination if already employed. You also release the company from any liability resulting from your failure to provide accurate information. DEI Statement Our company-wide approach to diversity, equity and inclusion is focused on our workplace, community, and business outcomes. We believe DEI is a key component to our mission of delivering renewable solutions and leading the transition to a sustainable energy future. As such, we strive to become a more diverse, equitable and inclusive workplace by increasing access and development opportunities for underrepresented talent. Our aspiration is to build a culture of belonging and accountability by creating opportunities for growth and continuous listening to ensure actionable progress. EEO Statement PowerFlex is committed to building a diverse and inclusive workplace. We are a proud Equal Opportunity Employer and prohibit discrimination based on age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding, and related medical conditions), and sexual orientation. Privacy Notice to California Job Applicants For information on Privacy Notice to California Job Applicants, click here. Privacy Policy PowerFlex is committed to protecting the privacy of your personally identifiable information, for more information click here. Special Accommodation Language If you require assistance or accommodation while seeking employment with PowerFlex, please contact Human Resources at (209) 227-1511 or . Please note that these communication alternatives are for accommodation requests and not for general employment inquiries. Powered by JazzHR udVnTlgmGZ

Job Description DUTIES AND RESPONSIBILITIES The ideal Systems Engineer III candidate is desired to have BS degree in engineering, computer science, information technology, or mathematics. Software Engineer only: Working towards or have the following certifications within one and a half year after assuming duties: Professional Software Engineering Master (PSEM)/ Certified Software Development Professional (CSDP) or with COR approval complete a vendor/platform specific certification (e.g., Microsoft Certified Solutions Developer (MCSD). Microsoft Certified Applications Developer (MCAD), Microsoft Certified Database Administrator (MCDBA), Sun Certified Professional (SCP). Red Hat Certification Program (RHCP), CISCO Certified Network Professional (CCNP), CISCO Certified Design Professional (CCDP), Oracle Certified Professional (OCP), etc.). Five (5) years of experience in technical field/project level in SATCOM or RF, to include: Technology Analysis and Assessment, Design Definition, Development of Systems Specification, Systems Analysis. Systems Architecture, Systems/Equipment Integration, Test & Evaluation Criteria, and Logistics support of C4ISR requirements. Five (5) years of technical experience in support of SATCOM or RF Specific Projects. Experience may be achieved simultaneously. REQUIRED SKILLS/YEARS OF EXPERIENCE A bachelor’s degree, technical school, trade school or military training in industrial engineering, electronics technology, information systems, computer science or other related technical field and ten years Navy SATCOM troubleshooting and/or customer service experience providing technical expertise in such areas as research, design, development, testing, or manufacturing process improvement. Five (5) years of experience applying and managing IA requirements in a DoD environment. Ten years engineering experience with computer LAN/WAN systems including systems analysis, systems/equipment support, software development, test and evaluation, and systems integration. In-depth knowledge of the interfaces between Navy C4I and other systems including the software associated with these systems and equipment desired. Experience in design, analysis, development, and implementation of management information systems. This position is required to have and maintain a Secret US DoD security clearance. REMARKS Must be able to communicate effectively in English, both verbally and in writing. Must be able to interface effectively with all levels of technical and management personnel. Labor Category - ENGINEER, SYSTEMS III Compensation: $56 - $66 an hour. Compensation for positions at Centurum vary depending on a wide range of factors including, but not limited to, location, responsibilities, skill set, and level of experience. EOE M/F/Disability/Veteran Benefits Full-time employees are eligible for the following benefits enrollment from their date of hire: • Health Insurance - Centurum provides insurance for employee and dependent in a comprehensive package. Coverage for vision care is included. This option is available on a cost-sharing basis., • Dental Insurance - Available in conjunction with Health Insurance for an additional cost. Provides oral maintenance care for employee and dependent., • Basic Life Insurance - Company provided benefit for all full-time employees., • Supplemental Life Insurance - Optional life insurance coverage to employees at group rates., • Dependant Life Insurance - Optional coverage for dependents at a group rate., • Long Term Disability Insurance - Optional coverage available to employees at group rates., • Vacation and Sick Leave - Leave accrual is determined by length of service., • Holidays - The company observes ten paid holidays each year. Powered by JazzHR CNvD2kD3mI

Job DescriptionDescription: As a Project Environmental Engineer or Scientist, you will be responsible for planning, performing, and managing fieldwork to collect environmental data (soil, sediment, groundwater, and vapor), performing and managing oversight of cleanup construction, lead efforts related to multimedia compliance, evaluating and interpreting environmental data, performing engineering and scientific analysis and evaluation, preparing cleanup documents including work plans, reports and design (design drawings, specifications, and engineers estimate), managing projects/tasks, and mentoring junior staff. Performs duties in collaboration with senior engineers/geologists. Essential Duties and Responsibilities • Plan, perform, and manage field explorations and environmental data (soil, sediment, groundwater, and vapor) collection efforts. Field explorations may include drilling and test pitting to collect soil samples, sediment grab sampling and coring, and monitoring well installation and collection of groundwater samples., • Lead efforts related to multimedia compliance (predominantly construction and industrial stormwater, but air and wastewater are included). This includes permitting, monitoring, and reporting across construction and operational phases., • Evaluate and interpret field and laboratory environmental data, perform engineering/scientific analysis and evaluation, and develop solutions to complex problems., • Evaluate the fate and transport of environmental contaminants in various media including soil, sediment, groundwater, and vapor, and develop conceptual site models to evaluate contaminant exposure pathways to receptors., • Prepare remedial investigation work plans, sampling and analysis plans, data reports, remedial investigation/feasibility study (RI/FS) reports, cleanup action plans, and remedial action completion reports on environmental remediation projects involving multiple contaminated media including soil, sediment, groundwater, and vapor., • Prepare design documents and supporting deliverables, including engineering calculations, design drawings, specifications, and engineers' estimate., • Prepare permit applications and coordinate with regulatory agencies in obtaining project permits., • Support clients with project bidding/contract solicitation, and contractor selection process for cleanup construction., • Perform management and oversight of cleanup construction involving remedial excavation, dredging of contaminated sediment and wood debris, installation of sediment caps, installation, operations and maintenance of in-situ remediation systems and site restoration activities., • Provide project closeout and long-term monitoring support on environmental remediation projects., • Perform project and task management duties, such as developing scopes of work and budgets, coordination with clients, subcontractor solicitation, invoicing, cost control, and contract reviews., • Communicate effectively with clients, regulators, contractors and project staff through the lifecycle of a project., • Mentor and train junior staff., • Bachelor’s degree in civil/environmental engineering or geology. Master’s degree preferred., • 5 to 10 years of environmental consulting or related professional experience., • QSD or QSP certification preferred., • PE license required., • Ability to prepare proposals, work plans, data reports, remedial investigation/feasibility study (RI/FS) reports, and design (design drawings, specifications and engineers' estimate) under a senior engineer’/geologist’s supervision., • QISP certification is preferred., • Familiarity with Local, State, and Federal permitting processes applicable to environmental cleanup projects is preferred., • Strong project management and technical environmental skillset preferred., • Ability to consistently meet tight deadlines in a fast-paced work environment., • Works well independently and collaboratively as part of project teams and GeoEngineers’ environmental group., • Strong verbal and written communication and technical writing skills., • A valid driver’s license is required., • All candidates are subject to completing a background check, and reference check., • All candidates are required to participate in our medical surveillance program., • Ability to perform a wide range of physical activities and do heavy work including exerting up to 50 pounds of force on occasion., • Ability to perform consistent work on a PC with prolonged sitting and view of a monitor/screen., • Ability to travel for short-term and long-term assignments as needed. At GeoEngineers, investing in our people is a top priority. In addition to competitive and equitable pay, we are proud to offer a wide range of benefits to support employees and their families, including healthcare (with travel benefit for care not locally available), 401(k) with company match, short-term and long-term disability, life insurance, wellbeing benefits, paid vacation and sick time and paid holidays, among others. View our full listing of benefits here. Our Commitment to Belonging at GeoEngineers When people feel they can bring their whole selves to work, that they have a voice and are supported and respected, it creates trust and a feeling of belonging— employees then flourish, grow their careers, and do the best work of their lives. A culture of belonging allows our employees to thrive and our company to prosper. This is a journey, and we are committed to doing the work, learning and evolving as we go. GeoEngineers is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations, and ordinances. GeoEngineers is also committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or accommodation while seeking employment, please contact Human Resources at or by phone at (425) 861-6000. We will then make a determination regarding your request for reasonable accommodation on a case-by-case basis. We welcome and encourage individuals from all backgrounds and experiences to apply for openings on our team. We would love for you to join us! We care about your privacy. Read GeoEngineers’ Privacy Notice for details on our personal data policies. Requirements:

Job Description Intrepid Studios’ Ashes of Creation team is looking for a highly motivated and talented Senior Anti-Cheat Engineer to join us, here in beautiful southern California. This role will report to the Lead Engineer and support our engineering team by implementing updates and new key features on Ashes of Creation to ensure that we deliver great gameplay and protection from cheating/abuse for our valued community! This is a great opportunity to unleash your creativity and partner with talented game veterans to craft a unique MMORPG that helps bring people together. Responsibilities • Work closely with designers, artists, and other engineers to ensure a great player experience, • Design and develop gameplay features across client and server to mitigate cheating and abuse, • Maintain familiarity of the game’s design, for both the live product and for future patches, • A passion to make life difficult for the “bad guys”, • Mastery of C++, • A minimum of 7 years’ game programming experience, • A strong motivation to analyze and improve systems and infrastructure, • A solid understanding of Windows Internals and WINAPI., • Self-motivation and willingness to participate in many areas of game development, • Experience with securing applications, game cheating, or client/network exploitation, • Proficiency in multi-threaded systems, • Previous experience designing gameplay systems for MMO games, • Bachelor’s degrees in computer science, mathematics, physics, or a related field or equivalent work experience, • Experience with code and algorithmic optimization to improve performance, • Resume & Portfolio, • Cover Letter which should include:, • Relevant information about yourself that demonstrates exceptional ability and goes beyond your resume, • Why you are interested in working at Intrepid Below you'll find an outline of the interview plan for this role. Please note that while this is what we expect the process to look like; we may ask you for supplemental information or require an additional step before making a final decision. • 30 min interview with a member of our Talent Team, • 30 min interview with the hiring manager, • Test, • Panel interviews with several members of the hiring team, • Final interview with the executive team We offer competitive pay based on market standards plus a significant annual bonus structure. The base salary for this role is between $125,000 - $187,500, depending on skills and experience. Individual compensation decisions are based on a number of factors, including experience level, skillset, and balancing internal equity relative to peers at the company. We expect the majority of the candidates who are offered roles at our company to fall throughout the range based on these factors. Job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that may be required of the employee. We encourage individuals from all backgrounds, including race, gender identity, sexual orientation, disability status, to apply for positions. We are an equal opportunity employer and we're committed to a fair and consistent interview process and employer experience. About Us: Founded in 2015, Intrepid Studios is the independent developer and publisher of the upcoming and Most Anticipated MMORPG, Ashes of Creation. Based in beautiful Southern California, Intrepid has assembled a veteran AAA team of tremendous talent and experience in the MMORPG industry. The gaming industry can be a turbulent storm of hiring cycles and layoffs. We’ve set out to do something different, to break this cycle and create an independent studio capable of withstanding the chaos of this industry. We’ve brought on-board a team of professionals that hold a diverse set of skills, and who all share a singular goal: making fun games. The studio is designed to be an open place for collaboration and communication, a place that is conducive to team building and success. Our goal is to build a family that will laugh together, play together, succeed together, and stay together. All posted positions are full-time with generous medical benefit options covered 100% by employer for employees and dependents plus paid vacation & sick days, and 401k with matching. We're proud to be an Equal Opportunity Employer. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Intrepid Studios will not tolerate discrimination or harassment based on any of these characteristics. Applicants of all ages, identities, and backgrounds are encouraged to apply. Intrepid Studios will provide reasonable accommodation to employees who have protected disabilities consistent with local law. See more details on your right to work here: . This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. See more details here: . Note to Recruiters and Placement Agencies: We do not accept unsolicited agency resumes. Unsolicited resumes received will be considered our property and will be processed accordingly. Powered by JazzHR sWjeI6Coqc

Job Description Quake Global is seeking an experienced Process Quality Engineer with a strong technical background in mass production processes and quality assurance for the telecommunications and automotive industry. The ideal candidate will ensure that production processes are efficient, reliable, and meet the highest quality standards. This role involves overseeing the end-to-end production and design process, driving continuous improvements, and ensuring that products comply with industry standards and regulatory requirements. This is an on-site role based in San Diego, and only candidates located in San Diego will be considered. DUTIES AND RESPONSIBILITIES: Production Quality Control: • Implement and monitor quality control systems for mass production, ensuring compliance with telecommunications industry standards (e.g., ISO 9001, TL 9000)., • Develop and oversee in-line and final product inspection procedures to ensure product quality throughout the production process., • Lead the setup, monitoring, and improvement of mass production processes to maximize efficiency and reduce waste., • Collaborate with the design and engineering teams to transition products from development to high-volume production., • Develop and optimize assembly line processes for telecom hardware and components, ensuring scalability and repeatability., • Work closely with suppliers to ensure the quality of materials and components used in production., • Ensure all production processes comply with regulatory standards, including telecom-specific certifications and international quality standards., • Analyze production data, identify trends, and implement corrective actions to continually improve product quality and production performance., • Partner with R&D, design, and manufacturing teams to ensure new products are manufacturable at scale with high-quality standards. Education: • Minimum 2-3 years of experience in mass production and quality assurance roles within the telecommunications industry or similar hardware manufacturing sectors., • Strong understanding of telecommunication products and their manufacturing processes., • Familiarity with quality management systems (QMS), such as ISO 9001, TL 9000, or similar., • Knowledge of lean manufacturing, Six Sigma methodologies, and statistical process control (SPC)., • Hands-on experience with failure mode and effects analysis (FMEA), root cause analysis (RCA), and implementing corrective actions., • Strong analytical, problem-solving, and decision-making skills., • Excellent communication and leadership skills, with the ability to work cross-functionally., • Certifications: Six Sigma Green Belt/Black Belt, Quality Management Certification, or similar., • Experience with automation and robotics in mass production., • Problem Solving: Ability to identify and resolve issues in a fast-paced production environment., • Continuous Improvement Mindset: Strong commitment to driving efficiency and quality improvements., • Attention to Detail: Ensuring that production processes meet the highest quality standards and specifications., • Team Collaboration: Ability to work effectively with cross-functional teams to achieve production and quality goals.Company DescriptionFor more than 20 years, the biggest brands in the world from construction to mining to assisted living have turned to Quake for their IoT technology needs. Quake is able to partner with such a wide range of customers because we tailor solutions to their specific needs—and also because we make the technology that drive those solutions. Quake-manufactured products and solutions are currently used in the automotive, oil and gas, IT, construction, logistics, industrial, security, healthcare, and senior living markets. Coupled with Quake devices, our programmable analytics tools can optimize everything from mining site logistics to hospital operations to assisted living compliance and beyond; the possibilities are infinite. And Quake’s stand-alone devices and integrated solutions always work on the most efficient network for the job, including satellite, 5G, WiFi, V2x, BLE, UHF, RFID, or any combination.For more than 20 years, the biggest brands in the world from construction to mining to assisted living have turned to Quake for their IoT technology needs. Quake is able to partner with such a wide range of customers because we tailor solutions to their specific needs—and also because we make the technology that drive those solutions. Quake-manufactured products and solutions are currently used in the automotive, oil and gas, IT, construction, logistics, industrial, security, healthcare, and senior living markets. Coupled with Quake devices, our programmable analytics tools can optimize everything from mining site logistics to hospital operations to assisted living compliance and beyond; the possibilities are infinite. And Quake’s stand-alone devices and integrated solutions always work on the most efficient network for the job, including satellite, 5G, WiFi, V2x, BLE, UHF, RFID, or any combination.

Job DescriptionDescription: This position requires active U.S. national security clearance and the ability to obtain one. To learn more about the security clearance process please access this link. Additionally, travel may be required to customer and subcontractor sites as well as other office locations. This position is with Highbury Defense Group, an Accelint company. Accelint is dedicated to delivering mission-critical technology and defense solutions that accelerate innovation, readiness, and national security outcomes. We provide technical, cybersecurity, logistics, and program management support to US Department of Defense (DoD) and Department of State (DoS) agencies and select foreign governments and militaries. Our experience spans decades of operational and strategic support to the DoD, DoS, US Navy, USMC, USAF, and US Army. Our people range from retired and separated military to seasoned defense contractors to new grads. Our success stems from our drive to always provide objective, effective, and cost-efficient advice and solutions to our customers. Highbury Defense Group is seeking a motivated cyber security engineer to assist in the design and integration of a centralized system for Defensive Cyber Operations (DCO) that helps organizations detect, analyze, and respond to cybersecurity incidents in real-time. Requirements: • Possesses in-depth knowledge and expertise in designing, engineering, integrating, and installing various cybersecurity products, ensuring comprehensive protection against evolving threats. This includes proficiency in SIEM Integration with Third-Party Security Monitoring Tools., • Experience in seamlessly integrating SIEM products with third-party security monitoring tools, facilitating centralized and streamlined data analysis for effective threat detection and response., • Network Intrusion Detection/Prevention Systems (IDPS): Hands-on expertise in deploying and managing IDPS solutions, including Palo Alto, Firepower, or Trellix NX, to detect and prevent malicious activities, safeguarding network infrastructure and critical assets., • Firewall Security & Management: Experience in configuring, maintaining, and optimizing firewalls (Palo Alto, Cisco Firepower, etc.) for enterprise environments., • Vulnerability Assessment & Management: Experience using Tenable Nessus, Tenable.sc, or similar vulnerability scanners to identify, assess, and remediate security vulnerabilities across networked assets., • Wireshark: Proficiency in utilizing Wireshark for packet analysis and network troubleshooting., • Network Taps (Copper and Fiber): Comprehensive understanding and experience in deploying Network Taps for both copper (Ethernet) and fiber technologies., • Must have subject matter expertise to integrate across a wide variety of hardware / software components, such as HP / Dell high powered servers, Unix / Linux, and Windows Servers. Required Qualifications: • 5-7 years hands on experience in planning, organizing, completing, and presenting assessments of National Security/Cybersecurity related concepts, analyses, studies and procedures., • Thorough understanding of DoD Computer Network Defense policy and requirements and have cursory familiarity with boundary defense tools and processes (e.g. network scanners; vulnerability mitigation; remediation; risk management)., • Coordinate, observe and report on vendor integration events, both CONUS and OCONUS., • Possession of excellent verbal, written, interpersonal and presentation skills to customers., • Effective written and verbal communication skills resulting in the ability to achieve consensus in resolving problems in all phases of acquisition life cycle with all stakeholders., • Experience with Foreign Military Sales programs is high desired., • Minimum B.S. in Computer / Electrical Engineering or related fields such as Network Engineer. Desired Qualifications: • CASP / CISSP is highly desired (even if in process). Clearance Information: Some positions will require access to U.S. National Security information. Positions that require this access will be required to receive and maintain a U.S. government personnel security clearance (PCL). In order to qualify for this position, the candidate must be a US Citizen and either currently possess this National Security eligibility or be able to complete the investigation application process with a favorable determination and maintain that eligibility throughout their employment. EEOC & Know Your Rights: Accelint companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, status as a protected veteran or any other status protected by applicable federal, state, and local law. We ensure that all employment decisions, including hiring, promotion, compensation, and other terms and conditions of employment, are based on merit, qualifications, and business needs. For more information about your rights, please review the "Know Your Rights" poster from the Equal Employment Opportunity Commission (EEOC). ADA: In compliance with the Americans with Disabilities Act (ADA), if you have a disability and would like to request an accommodation within the application and selection process, please contact . E-Verify: Accelint companies utilizes E-Verify to confirm employment eligibility to work in the United States. Verification occurs after the employee has been hired and completes the Form I-9. Salary Range: $100,000-120,000. The listed pay scale reflects the broad, minimum to maximum, pay scale for this position for the location for which it has been posted and is not a guarantee of compensation or salary. Other compensation considerations may include, but are not limited to, job responsibilities, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, or other applicable factors. Benefits include: • Paid Time Off, • Paid Company Holidays, • Medical, Dental & Vision Insurance, • Optional HSA and FSA, • Base and Voluntary Life Insurance, • Short Term & Long-Term Disability Insurance, • 401k Matching, • Employee Assistance Program

Job DescriptionDescription: This position requires active U.S. national security clearance and the ability to obtain one. To learn more about the security clearance process please access this link. Additionally, travel may be required to customer and subcontractor sites as well as other office locations. This position is with Highbury Defense Group, an Accelint company. Accelint is dedicated to delivering mission-critical technology and defense solutions that accelerate innovation, readiness, and national security outcomes. We provide technical, cybersecurity, logistics, and program management support to US Department of Defense (DoD) and Department of State (DoS) agencies and select foreign governments and militaries. Our experience spans decades of operational and strategic support to the DoD, DoS, US Navy, USMC, USAF, and US Army. Our people range from retired and separated military to seasoned defense contractors to new grads. Our success stems from our drive to always provide objective, effective, and cost-efficient advice and solutions to our customers. We are seeking a highly motivated Model-Based Systems Engineer (MBSE) to support a variety of Department of Defense (DoD) and Department of Navy (DoN) Communications and GPS Navigation programs. The ideal candidate will bring deep expertise in MBSE methodologies, tools (such as Cameo/MagicDraw), and DoD acquisition processes to develop and maintain digital system models throughout the system lifecycle. This role requires the ability to work closely with cross-functional teams, customers, and stakeholders to ensure system design integrity and compliance with government standards. • Develop and maintain system architecture models using SysML and MBSE tools (e.g., Cameo/MagicDraw, Rhapsody, Enterprise Architect), • Facilitate the development of Black Box and White Box models in accordance with DoD and NAVWAR standards, • Work closely with program engineering teams to develop questionnaires to identify what data is available for each program that can feed into a model, then help match programs with the appropriate MBSE automation tool(s) and enter data into the appropriate MBSE tool., • Integrate MBSE approaches with traditional systems engineering practices and digital engineering frameworks, • Translate stakeholder requirements into system models and technical specifications, • Participate in or lead technical reviews, model-based design efforts, and system verification/validation planning, • Collaborate with software, hardware, and integration teams to align models with implementation and testing, • Support DoD acquisition documentation and milestone reviews (e.g., SRR, PDR, CDR), • Ensure models comply with DoD standards (e.g., DoDAF, UAF, MIL-STD-881, NIST 800-160 Vol 1/2), • Prepare technical documentation and present modeling results to stakeholders, including government clients, • Maintain configuration control of models and support versioning and reuse strategies Requirements: Required Qualifications: • 5+ years of experience in systems engineering with at least 2 years in MBSE roles., • Proficiency in MBSE tools such as Cameo/MagicDraw, Rhapsody, or Enterprise Architect., • Experience with Black Box and White Box modeling and development., • Experience with SysML and formal modeling techniques including Black and White Box Models., • Familiarity with DoD systems lifecycle (DoDI 5000.02, JCIDS, etc.) and C4I engineering processes., • Experience supporting DoD programs (Army, Navy, Air Force, Space Force, or OSD)., • Active Secret clearance required., • Bachelor's in systems engineering, Aerospace, Electrical Engineering, Computer Science, or a related field. Clearance Information: Some positions will require access to U.S. National Security information. Positions that require this access will be required to receive and maintain a U.S. government personnel security clearance (PCL). In order to qualify for this position, the candidate must be a US Citizen and either currently possess this National Security eligibility or be able to complete the investigation application process with a favorable determination and maintain that eligibility throughout their employment. EEOC & Know Your Rights: Accelint companies are Equal Opportunity Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, status as a protected veteran or any other status protected by applicable federal, state, and local law. We ensure that all employment decisions, including hiring, promotion, compensation, and other terms and conditions of employment, are based on merit, qualifications, and business needs. For more information about your rights, please review the "Know Your Rights" poster from the Equal Employment Opportunity Commission (EEOC). ADA: In compliance with the Americans with Disabilities Act (ADA), if you have a disability and would like to request an accommodation within the application and selection process, please contact . E-Verify: Accelint companies utilizes E-Verify to confirm employment eligibility to work in the United States. Verification occurs after the employee has been hired and completes the Form I-9. Salary Range: $120,000-159,871. The listed pay scale reflects the broad, minimum to maximum, pay scale for this position for the location for which it has been posted and is not a guarantee of compensation or salary. Other compensation considerations may include, but are not limited to, job responsibilities, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, or other applicable factors. Benefits include: • Paid Time Off, • Paid Company Holidays, • Medical, Dental & Vision Insurance, • Optional HSA and FSA, • Base and Voluntary Life Insurance, • Short Term & Long-Term Disability Insurance, • 401k Matching, • Employee Assistance Program

Job DescriptionSalary: $109k to $135k MID Systems Engineer PMW160 Job Description: The individual will be assigned as a Staff Systems Engineer for PEO C4I, PMW 160 in support of the Automated Digital Network System (ADNS) program. This person will be responsible for providing technical and programmatic analysis in support of ADNS and provide strong knowledge of systems engineering, developing solutions, and implementing enhancements across applications and hardware. The individual will support the requirements development process, working with program managers, systems engineers, and configuration managers to ensure adherence to NAVWAR guidance. The individual will represent PMW 160 interests and liaison between PEO C4I and numerous other internal and external stakeholders. Duties and Responsibilities: • Responsible for requirements development for the legacy ADNS system as well as the next generation Software Defined Network (SDN)., • Responsible for Configuration Management processes of system-wide documentation, as well as understanding hardware/software engineering changes across the system., • Perform analyses that cover areas such as complete ADNS-based documentation review for change impacts and update identification, all Enterprise Change Requests (ECR) and System Engineering Technical Review (SETR) related documentation reviews for accuracy and completeness., • Perform technical baseline management and event based technical reviews with ADNS Subject Matter Experts (SMEs), other solution owners, and Lead Systems Integrators. Basic Qualifications: • Security clearance required prior to start: Secret, • BS from an accredited college in related discipline (Engineering, Computer Science, Mathematics, Physical Science, Etc.), • Minimum of 6 years of professional experience; or 4 to 6 years of professional experience with a related Masters degree, • Proven ability to effectively lead and collaborate in a dispersed team environment, • Experience working with and presenting to internal and external customers, • Excellent oral and written communication skills, • Proficiency in Microsoft Word, Excel, & PowerPoint Desired Skills: • Experience developing system, hardware, and performance requirements, • Experience in technology integration of complex systems, • Experience working within a System Development Life Cycle, • Knowledge of the DOORS tool suite, • Basic understanding of communications and network infrastructure systems, • Familiarity with Model Based System Engineering (MBSE), • Methodical approach to problem solving, • Understanding of tactical afloat network engineering (ADNS/CANES engineering experience is a plus), • Understanding of ship and shore-based Navy Communications and Network Infrastructure systems Clearance Requirement:This position requires an active government security clearance; you must be a US Citizen for consideration. Ability to Work Remotely:A mix of on-site and remote. Nominally, the individual is expected to spend at least two days each week on-site. Work Schedules: Mission Focused System Inc., MFS, supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five-day work week while others may be flexed. These flexed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position:5x8, Monday Friday Travel Anticipated: <10% Location:San Diego, CA Timing: MFS anticipates a start date of: Immediately MFS, a Veteran-Owned Small Business, provides full spectrum systems and systems-of-systems engineering and integration services and solutions for space, C4ISR, cyber and enterprise information systems. We strive to deliver expert-level systems engineering and technology integration services at affordable rates so mission, capability and user success are the #1 priority. MFS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Job Description Intrepid Studios is seeking a Senior Build Engineer to help power the development of our epic MMORPG, Ashes of Creation. We are looking for a detail-oriented developer with strong hands-on Unreal Engine 5 experience, who thrives in scaling CI/CD systems and build pipelines to support a large, dynamic game project. Responsibilities: • Write and maintain Unreal BuildGraph pipelines to support scalable and efficient CI/CD workflows., • Own the build system, ensuring reliability, scalability, and ease of use across all departments., • Establish and enforce best practices around build pipelines, code quality, branching strategies, and process documentation., • Collaborate across teams to diagnose and resolve build performance issues, ensuring smooth daily iteration on the game., • Continuously improve automation, monitoring, and reporting to maintain high system availability.Requirements:, • 7+ years of professional experience as a Build Engineer, Release Engineer, or similar role., • Strong expertise in CI/CD systems and distributed build pipelines., • Strong experience with C++ and C#, • Hands-on experience with Unreal Engine 5 BuildGraph and large-scale game development., • Proficiency with Horde (Unreal’s distributed build system) and Jenkins (or equivalent CI platforms)., • Solid knowledge of version control systems (e.g., Perforce)., • Strong problem-solving skills and ability to debug complex build issues across platforms.., • Excellent communication skills and ability to work with cross-disciplinary teams, • Excellent problem-solving skills and the ability to work collaboratively in a fast-paced environment., • Bachelor’s degree in Computer Science, Software Engineering, or equivalent experience.Nice to Have (Pluses):, • Experience shipping AAA or large-scale multiplayer games., • Familiarity with cloud build orchestration (AWS, Azure, or GCP)., • Knowledge of containerization (Docker/Kubernetes) for scaling build jobs.Required Application Materials:, • Resume, • Cover Letter which should include:, • Why you are interested in working at Intrepid, • 30 min interview with a member of our Talent Team, • 30 min interview with the hiring manager, • Panel interviews with several members of the hiring team, • Final interview with the executive team We offer competitive pay based on market standards plus a significant annual bonus structure. The base salary for this role is between $125,000 - $187,500, depending on skills and experience. Individual compensation decisions are based on a number of factors, including experience level, skillset, and balancing internal equity relative to peers at the company. We expect the majority of the candidates who are offered roles at our company to fall throughout the range based on these factors. Job descriptions are not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that may be required of the employee. We encourage individuals from all backgrounds, including race, gender identity, sexual orientation, disability status, to apply for positions. We are an equal opportunity employer and we're committed to a fair and consistent interview process and employer experience. About Us: Founded in 2015, Intrepid Studios is the independent developer and publisher of the upcoming and Most Anticipated MMORPG, Ashes of Creation. Based in beautiful Southern California, Intrepid has assembled a veteran AAA team of tremendous talent and experience in the MMORPG industry. The gaming industry can be a turbulent storm of hiring cycles and layoffs. We’ve set out to do something different, to break this cycle and create an independent studio capable of withstanding the chaos of this industry. We’ve brought on-board a team of professionals that hold a diverse set of skills, and who all share a singular goal: making fun games. The studio is designed to be an open place for collaboration and communication, a place that is conducive to team building and success. Our goal is to build a family that will laugh together, play together, succeed together, and stay together. All posted positions are full-time with generous medical benefit options covered 100% by employer for employees and dependents plus paid vacation & sick days, and 401k with matching. We're proud to be an Equal Opportunity Employer. We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. Intrepid Studios will not tolerate discrimination or harassment based on any of these characteristics. Applicants of all ages, identities, and backgrounds are encouraged to apply. Intrepid Studios will provide reasonable accommodation to employees who have protected disabilities consistent with local law. See more details on your right to work here: . This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. See more details here: . Note to Recruiters and Placement Agencies: We do not accept unsolicited agency resumes. Unsolicited resumes received will be considered our property and will be processed accordingly. Powered by JazzHR KYTpusSoUl

Job DescriptionDescription: Job Type: Full Time/Exempt Location: 9455 Ridgehaven Ct #200, San Diego, CA 92123 At Harvey, we don't build - we innovate, collaborate, and deliver excellence. Be part of it as our new Project Engineer. About our Company: HARVEY USA provides commercial construction services throughout the western United States, exceeding expectations by delivering innovative construction solutions to a broad range of clients that demand excellence. About the Job: The main purpose of an Assistant Project Manager (APM) is to manage construction projects by planning, organizing, and controlling all elements of the project under the direction of a Project Manager or VP. Results-oriented, hands-on professional with the ability to deal effectively and interact well with clients, subcontractors, and employees. Must have the ability to resolve problems/conflicts diplomatically and tactfully. Requirements: · 2-4 Years of experience in the construction industry · 2-4 Years of experience as a Project Engineer or similar · Bachelor's Degree in Construction Management, Construction Engineering, or equivalent · Must be able to work in a fast-paced environment and maintain teamwork and a positive attitude · Experience in the bid process with subcontractors · Quantity take off and Estimating experience · Ability to read and interpret blueprints, schedules, specifications, and other required construction documents · Strong computer skills and proficient in Microsoft Office Suite, MS Project, Outlook, Procore, and Bluebeam · Highly organized with strong emphasis on self-motivation and analytical skills · Strong interpersonal skills with an ability to interact with executive-level external and internal clients · Ability to identify and manage priorities · Ability to manage and coach others in both vocational and administrative skills · Capable of multi-tasking, problem-solving solving and can work in a team environment as well as independently · Exhibits confidence, ambition, and self-motivation This employer participates in E-Verify and will provide the federal government with your form i-9 information to confirm that you are authorized to work in the U.S. Want to work in a friendly, fast-paced environment where opportunities for advancement abound? We believe that a diverse culture means more than just recognizing our differences. A truly diverse culture allows you the opportunity and freedom to be yourself. We are committed to celebrating diversity and to fostering a diverse working community. All offers of employment are contingent upon successfully passing a pre-employment background check, drug screening, and physical endurance test relevant to the job requirements. We are an equal opportunity employer and consider all qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, or any other protected characteristic under applicable law. Equal Opportunity Employer D/F/M/V.

Job Description Xometry (NASDAQ: XMTR) powers the industries of today and tomorrow by connecting the people with big ideas to the manufacturers who can bring them to life. Xometry's digital marketplace gives manufacturers the critical resources they need to grow their business while also making it easy for buyers at Fortune 1000 companies to tap into global manufacturing capacity. Xometry is seeking highly motivated Mechanical Engineers to act as customer-facing Technical Account Managers (TAMs). These TAMs will be embedded within our most strategic accounts, acting as an extension of their engineering teams. This role is a unique blend of customer engagement, technical expertise, and operational execution. TAMs will report into Operations but will work very closely with Sales to drive growth and ensure customer satisfaction. This is a unique opportunity to join a dynamic and growing company at the forefront of digital manufacturing. If you are a highly motivated Mechanical Engineer with a passion for customer success and a desire to make a real impact this is the role for you. Responsibilities: Customer Integration: • Become a trusted advisor and technical expert for assigned enterprise accounts, • Weekly onsite visits at customer and partner locations, building relationships and understanding their needs, • Collaborate closely with customer engineers on Design for Manufacturing (DFM) to optimize projects for Xometry's platform, • Proactively identify and address potential manufacturing challenges, • As customer projects are awarded to Xometry, ensure orders are directed to the most qualified manufacturers within our network, • Conduct monthly on-site audits of manufacturing partners to ensure they meet Xometry's quality standards and customer specifications, • Manage projects to successful completion, overseeing production, and ensuring on-time delivery, • Handle critical communications, order changes, and escalations related to customer orders, • Partner with Enterprise Sales Executives to drive account growth and retention, • Identify opportunities for expanding Xometry's services within existing accounts, • Provide technical expertise and support during the sales process, • Bachelor's degree in Mechanical Engineering or a closely related field such Aerospace Engineering, Product Design/Development, or Industrial Engineering is required, • 7+ years of experience in manufacturing, product development, and project management, • Experience in the aerospace industry is highly preferred, • Strong understanding of manufacturing processes and DFM principles, particularly as they apply to CNC applications, • Experience in CNC Machining, Tube Bending, Composites, or 3D printing is preferred, • Proficiency in modelling and drafting software such as Solidworks, • Excellent communication, interpersonal, and problem-solving skills, • Experience with CRM systems such as Salesforce, • Proficiency in Google Suite and Microsoft Office Suite, • Ability to travel to customer and partner sites up to 50%, travel could be short notice and range from short day trips to multi-day drips #LI-Remote Xometry is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status. For US based roles: Xometry participates in E-Verify and after a job offer is accepted, will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.

Job Description Hazen and Sawyer is seeking a candidate to provide electrical engineering and design for water and wastewater facility projects. • Qualified candidate should have basic knowledge in industrial power design, including medium and low voltage electrical power distribution, generator design, motor control, VFDs, lighting systems, equipment layout and related activities., • Candidate should have basic working knowledge of the NEC and related Codes., • Support the lead electrical engineer on multiple concurrent projects for water and wastewater facilities., • Prepare project specifications, • Perform conductor sizing, conduit sizing, protective device sizing, lighting, and other electrical calculations, • Coordinate with civil, process-mechanical, structural, architectural, HVAC, and instrumentation disciplines, • Perform site visits as needed, • Perform electrical design work in AutoCAD and/or Revit as required by the project, • Perform electrical power system studies in SKM and/or ETAP as required by the project, • Review shop drawings and respond to request for information, • Bachelor of Science in Electrical Engineering, • 3-5 years of relevant experience in heavy industrial Electrical Engineering and Design; Prior experience in water/wastewater industry is desirable, • Familiarity with industrial power distribution system, • Experience in Microsoft Office products, • Experience with SKM or ETAP power system software is desirable, • Experience with AutoCAD and/or Revit BIM software is desirable, • EIT certification is desirable We provide a comprehensive benefits package which includes employer paid life insurance, 401k employer contribution (after 1 year of service), performance bonus, comprehensive family medical, dental and vision insurance, paid time off, holidays, short-term and long-term disability, paid parental leave (after 1 year of service), employee assistance and wellness programs. Typical starting pay range for this position depends on skills, experience, education and geographical location.

Job DescriptionABOUT US At RADAR, we're transforming the way the world thinks about physical retail. RADAR has raised over $104M from top investors, retailers, and strategics and works with some of the world's top billion-dollar global retailers. We're building the future of in-store experience where every product and every person can be precisely located in real time. Our platform combines RFID and AI to unlock hyper-accurate product visibility and automation at scale. From real-time inventory tracking to seamless checkout experiences, our technology empowers some of the world's largest retailers to streamline operations, reduce loss, and elevate both employee and customer experiences. We're a fast-growing, mission-driven startup where bold ideas, collaboration, and impact are at the core of everything we do. Join us as we reshape the physical world with digital precision, starting with retail and expanding far beyond! ABOUT THE JOB We are currently seeking a Systems Engineer to join our team and assist with efforts in modeling, simulating, and improving the performance of PHY and MAC systems. In this role, you will be responsible for identifying and addressing RF, Digital and Channel impairments, collaborating closely with engineers to validate and define performance requirements, and implementing physical layer algorithms. This position demands a strong proficiency in C++ and a deep understanding of wireless communication principles, enabling you to make critical decisions on performance versus implementation complexity. Your work will directly impact the development and optimization of advanced wireless technologies, requiring both innovative thinking and rigorous analysis. Responsibilities: • Define, implement, and simulate physical layer algorithms., • Identify and model system impairments in C++, validate against lab measurements., • Simulate impact of impairments on PHY and MAC layer performance., • Collaborate with engineers to specify system requirements., • Analyze trade-offs between performance and implementation complexity., • Devise and implement test strategies that adequately assess all aspects of the wireless system., • Work with other engineers to troubleshoot and resolve issues., • You have a Bachelor's degree in wireless communications and signal processing., • You have 2+ years of experience simulating end-to-end wireless systems under various RF conditions., • You are familiar with fixed-point design and implementation trade-offs., • You have strong C++ programming skills., • You have strong root-cause analysis skills., • You are able to collaborate with people of different working styles., • You have knowledge of RFID and sensor technologies and test procedures. Research has shown that women & underrepresented minorities are more likely to read lists of requirements and consider themselves unqualified if they don't meet every single one. This list represents what we're ideally looking for, but everyone has unique strengths & weaknesses, and we hire for strength & potential, not lack of weakness. Use of artificial intelligence or a LLM such as ChatGPT during the interview process will be grounds for rejection of your application process. CULTURE SNAPSHOT Mission-Driven: We're transforming retail with cutting-edge technology and building something that truly matters. Collaborative Team: We thrive on curiosity, shared goals, and solving complex problems together. High Impact: You'll make meaningful contributions from day one and help shape the future of our product and company. Clear Communication: We value honesty, humility, and respectful dialogue—everyone's voice matters. Balanced Lives: We work hard, but not at the expense of well-being. We respect time, boundaries, and life outside of work. Diverse Perspectives: We believe better ideas come from diverse backgrounds, experiences, and viewpoints. Empathy-Driven Design: We build with deep respect for our end users, listening closely to their feedback and needs.

Job Description About Capricor Therapeutics Capricor Therapeutics is a biotechnology company dedicated to developing transformative therapies for rare diseases, with a primary focus on Duchenne muscular dystrophy (DMD). We are pioneers in cell therapy and exosome-based technology, leveraging our proprietary StealthX™ platform to engineer innovative treatments. Our team is committed to harnessing cutting-edge science and advanced technologies to meet the unmet needs of patients living with DMD and other challenging medical conditions. Join us on our journey as we push the boundaries of medical science and pave the way for a healthier future. About the Role We are seeking a highly skilled Formulation Scientist to join Capricor Therapeutics and drive the development of stable, lyophilized exosome-based formulations for our groundbreaking therapies. In this critical scientific role, you will lead formulation design, optimization, and characterization, ensuring compliance with cGMP and supporting IND-enabling studies. You will collaborate with cross-functional teams, including analytical sciences, process development, and regulatory affairs, to advance our novel exosome-based drug delivery platforms. This role offers a unique opportunity to shape the future of exosome therapeutics, contributing directly to Capricor’s mission to transform the biotech industry and improve lives. Responsibilities Strategic Scientific Leadership • Develop and execute innovative formulation strategies for exosome-based drug products, aligning with Capricor’s mission to deliver transformative therapies for rare diseases, including DMD., • Stay ahead of advancements in exosome, lipid nanoparticle (LNP), and lyophilization technologies, implementing cutting-edge solutions to maintain a competitive edge., • Design and optimize exosome-based formulations for therapeutic modalities (e.g., nucleic acids, proteins, biologics), ensuring stability at 4°ree;C or room temperature for enhanced shelf-life., • Lead lyophilization process development for drug substances (DS) and drug products (DP), optimizing excipients, cryoprotectants, and thermal characterization (e.g., DSC, Freeze-Dry Microscopy) to extend stability., • Develop storage buffers (e.g., LNP-based) to support flexible storage conditions (4°ree;C, room temperature, -20°ree;C) and improve DS/DP integrity., • Perform physicochemical and biophysical characterization using techniques such as DLS, TEM, HPLC, LC-MS, DSC, and fluorescence-based assays to assess formulation performance., • Develop and validate quality control (QC) methods to evaluate stability, particle size, encapsulation efficiency, and biological activity of exosome-based DS/DP., • Collaborate with analytical scientists, process engineers, and regulatory affairs teams to define critical quality attributes (CQAs) and support IND submissions., • Partner with process development to transition formulations from R&D to clinical and commercial scale, ensuring scalability and GMP compliance., • Drive advanced formulation optimization to enhance exosome stability and delivery, leveraging data-driven approaches to meet regulatory and clinical demands., • Monitor and analyze key performance indicators (KPIs) for formulation processes, implementing corrective actions to improve efficiency and reliability., • Stay current with scientific literature and industry trends, contributing to Capricor’s innovation in exosome-based therapeutics. Requirements Minimum Qualifications • Education: Ph.D. in Pharmaceutical Sciences, Biochemistry, Bioengineering, Chemical Engineering, or a related field with 4+ years of biopharmaceutical industry experience; Master’s degree with 6+ years of relevant industry experience considered., • Experience: 4+ years of hands-on experience in biologics or vesicle-based formulation (e.g., exosomes, LNPs, liposomes, mAbs, peptides) in the biopharmaceutical industry., • Lyophilization Expertise: Direct experience with lyophilization process development, including excipient selection, thermal characterization, and cycle optimization for DS/DP stability., • Stability Optimization: Proven expertise in optimizing formulation stability at 4°ree;C or room temperature through forced degradation, real-time, and accelerated stability studies., • Analytical Skills: Proficiency in analytical techniques, including HPLC, LC-MS, DLS, TEM, and DSC, for formulation characterization., • Scientific Leadership: Demonstrated ability to plan and lead initiatives as a hands-on bench scientist in a fast-paced research environment., • Regulatory Knowledge: Strong understanding of cGMP, ICH guidelines, and compliance with 21 CFR Part 1271 and cGTP for injectable formulations., • Skills: Exceptional problem-solving, attention to detail, and communication skills, with a collaborative approach to cross-functional teamwork., • Direct experience with exosome-based therapeutics or vesicle-based systems (e.g., LNPs, liposomes)., • 5+ years of industry experience in biopharmaceutical or regulated environments within GMP or QC settings., • Expertise in GMP manufacturing, scale-up, and technical transfer to CMOs., • Experience authoring CMC sections for IND submissions or supporting regulatory interactions., • Proficiency in data analysis tools (e.g., Microsoft Excel, statistical software) and familiarity with process monitoring techniques., • Strong scientific communication and technical writing skills for reports, publications, and patent filings. Location Policy This position is based in San Diego, CA, with flexibility for occasional remote work as needed. Work Environment/Physical Demands • Physical Requirements: Ability to sit and stand for extended periods, lift/carry laboratory equipment and materials up to 40 pounds, move about the lab, and communicate effectively via telephone or in person. Capricor Therapeutics is headquartered in San Diego, California. We offer competitive compensation, generous vacation and parental leave, flexible working hours, and a collaborative work environment. If you are excited about joining a team that’s transforming the biotech industry through exosome-based therapeutics, we’d love to hear from you!

Job Description THOR Solutions is actively seeking a Port Engineer to support the Egypt Frigate (FFG) case onsite in Alexandria, Egypt. The Port Engineer will serve as NAVSEA’s execution agent for ship repair/transfer and maritime industrial projects as well as the program office representative at various Follow-On Technical Support and Ship Transfer related activities to enhance communications and provide a degree of quality assurance for work being accomplished. They shall have a primary role in supporting the PMS 326 Country/Program Manager. This individual will have a purely advisory role under the authority and guidance of NAVSEA. This position is FULL TIME ONSITE in Alexandria, Egypt. Typical Responsibilities: • Provide a central point of contact for NAVSEA concerning Egyptian Navy ex-Oliver Hazard Perry class FFGs to include engineering management support to schedule, coordinate, and perform vessel repair and maintenance, perform inspections of vessels for repair and maintenance standards and procedures, maintain accurate records of USN supported maintenance., • Manage limited resources and maintenance requirements for FFGs and provide the best guidance possible to support the in-country maintenance team, teams of contractors under direction of NAVSEA PMS 326 and the Egyptian Navy., • Provides the cognizant NAVSEA project manager with project specific updates on case related issues and keep NAVSEA informed of any potential schedule or quality problems., • Provides timely reports to PMS 326 detailing the progress/status of maintenance/ installation teams and provide oversight and insight regarding the team’s performance., • Schedule and coordinate flow of work based on host Navy orders, established priorities and availability of personnel, equipment, and resources., • Provide oversight and inspections of vessels for repair and maintenance standards and shipboard equipment and system problem solving., • Assist the foreign customer with preparing for ship repair production, planned maintenance events, and availabilities., • Determine, validate, and diagnose specific maintenance requirements for FFGs. This also requires defining the scope of work and assisting in execution of maintenance plans., • Coordinate necessary support services (Contractor, Original Equipment Manufacturers, USN, etc.) for incoming teams., • Integrate authorized work items for each platform’s set of maintenance and repair requirements. This is to ensure the development of an optimized work package., • Coordinate scheduling of work for various USN acquisition and life cycle support stakeholders conducting work in-country., • Assist in developing and providing oversight of the processes and procedures for planning and scheduling deferred maintenance., • Assist in identification of sources of support, both indigenous and USN sponsored. Anticipated Travel: Periodic travel to other port locations in Egypt as required by contract schedule. Typical Physical Activity: Desk/computer work in an office environment as well as physical labor in waterfront/shipboard environments. May require lifting items of up to 20 lbs., reaching and repetitive motion, traversing shipboard environments (e.g., confined spaces, ladders, hatches), or vision. Typical Pay Range: The anticipated pay range for this position in the identified location(s) is $100,000 – 120,000/year base rate plus applicable Department of State allowances for the location. Actual compensation offered will be based upon individual factors including education, qualifications, and experience. US Citizenship Required: Due to the requirements of the federal contract that this position supports, U.S. citizenship is required. Citizenship will be confirmed via I-9/E-Verify at the start of employment. Security Clearance Eligibility Required: This position requires a DoD Secret security clearance. A qualified candidate must either already possess an active or interim Secret security clearance (preferred) OR be eligible for a Secret security clearance upon hire. Typical Knowledge, Skills, and Abilities: • High school diploma/GED equivalent., • Bachelor’s Degree in Engineering or a related discipline. (Preferred), • At least five (5) years’ demonstrated expertise in shipboard maintenance and operations., • At least three (3) years FMS/OCONUS experience., • Previous experience with Perry class FFGs vessels., • Previous experience in platform centric integrated logistics support, quality control and assurance, testing, operations, maintenance, supply, and training., • Demonstrates proficiency in the generation of engineering reports and analyses., • Proficiency in Microsoft Excel, PowerPoint, and Word.Additional Preferred Knowledge, Skills, and Abilities:, • Previous Port Engineer experience with U.S. Navy and U.S. Navy maintenance processes., • USCG Third Assistant License., • Paid Time Off (accrued), • Paid Holidays, • 401(k) with employer match and traditional/Roth options, • Medical Insurance (3 plan options) + TRICARE Supplemental Coverage, • Dental Insurance (2 plan options), • Vision Insurance Plan, • Healthcare and Dependent Care Flexible Spending Accounts, • Commuter/Transit Benefits, • Basic Life/AD&D, Short-Term and Long-Term Disability Insurance, • Supplemental Life Insurance, • Pet Benefits, • Legal Resources, • ID Theft Benefits, • Employee Assistant Plan and Work-Life Program, • Voluntary Leave Transfer Program, • Tuition Reimbursement Program Founded in 2009, THOR Solutions, LLC (THOR) is a rapidly growing Center for Veteran’s Excellence (CVE) verified Service-Disabled Veteran-Owned Small Business (SDVOSB) providing mission critical support across the Department of Defense, Department of Homeland Security, federal civilian agencies and commercial maritime industry, worldwide. THOR provides innovative and tailored expertise in multidisciplinary engineering, project and program management, business and financial management, technical support, integrated logistics support, training support, fleet support, corporate operations support, assessments and studies. THOR is privileged to deliver service solutions to the nation’s most complex military, public sector and industry challenges. THOR is proud to be an Equal Opportunity Employer, including veterans and individuals with disabilities. THOR considers all qualified applicants for employment without regard to legally protected characteristics. This policy applies to all terms and conditions of employment. If you are an individual with a disability and would like to request a reasonable accommodation as part the employment selection process, please contact us at or (571) 215-0077. Powered by JazzHR 9t0ufujrqs

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you eager to apply your hands-on experience implementing and configuring tactical network communications systems to support innovative solutions for complex network architectures? If so – we want to hear from you! We are looking for an inquisitive builder/doer to join our growing team. Fuse is currently developing, integrating, and testing secure communications networks for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. This role will architect and develop network-based solutions throughout all phases of the development cycle, from requirements generation, to testing, to deployment. Must have in-depth experience with Linux, modeling environments and virtualized systems. What you'll do: • Develop and provide input for network architectures for our systems and customers, • Develop configurations for switches and routers, • Translate user and system requirements to system functionalities and reality, • Develop and implement network security architectures with HAIPE, IPSEC, TLS, and other protocols, • WAN, LAN, WLAN, VOIP setup and troubleshooting, • Support design, development, and test efforts for an airborne tactical networking system, • Implement router protocols including OSPF, EIGRP, RIP, BGP, PPPoE, and MANET, • Implement IA controls and ensure compliance with DoD RMF, • Work as a team throughout the design process, supporting sprint planning sessions, code reviews, and scrums, • B.S. in Information Systems, Computer Science, Engineering, or related Technical field, or 5 years equivalent experience, • Cisco Certified Network Associate (CCNA) – Routing & Switching (or CCNA Security), • 5+ years of experience as a network engineer, • Understanding of networking fundamentals including VLANs, subnets, protocols, and standards, • Demonstrated experience with Linux OS, • Experience with Linux System Administration, firewalls and settings, • Experience with virtualized systems applications and administration (VMWare, Esxi,KVM), • Excellent communication skills, • US Citizen Must be a nimble self-starter who is excited about technology and has the ability to think out of the box and suggest powerful new ideas. Nice to have: • CISSP, • Experience with or development of networking for Container based applications, • Experience with GNS3 or other modeling environments, • Network Operating Systems Certificate, • CompTia Security +, • Knowledge of wireless controllers (CISCO, Juniper), wireless access points and the ability to deploy and configure them, • Active secret clearance, • Familiarity with broadband line-of-sight radio data links (900 MHz and above), • Familiarity with broadband satellite data services (Inmarsat, Viasat, Intelsat, et. al.) and delay-tolerant networks, • Familiarity with NSA Type 1 encryption, especially high-assurance IP encryption (HAIPE) devices, • Working knowledge or experience with military networking systems and/or tactical data links, • Experience with US Navy Communications Networks such as ADNS/ISNS/CANES, • Knowledge of Navy Command, Control, Communications, Computers and Information Systems (C4IR) More about Fuse: Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary Range: $110,00 - $155,000 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description Who we are: Fuse builds innovative communications, networking, and computing solutions that improve the sharing of information, video, text, and voice among operators distributed throughout the airborne, maritime, and ground environments. We are a technology firm creating in-house software, network and hardware solutions that support our noble cause of advancing warfighter capabilities with elegant, user-focused communications, networks, and software systems. About this role: Do you thrive in innovative, design-driven environments with a high level of both accountability and trust? Are you passionate about delivering elegant hardware solutions with the right amount of engineering rigor? Are you seeking a technical role where you can take initiative? If so - we want to hear from you! Fuse is looking for a mid-level Systems Engineer ready to jump in with our existing team and help drive forward innovative approaches that expand and enhance existing systems and prototypes with a focus on software aspects and integration with hardware. Apply your dynamic and detail-oriented mindset to our development cycle that combines software, network, and hardware components. This role will support the agile development of innovative communications, networking, and computing solutions for U.S. defense agencies that improve the sharing of information among warfighters distributed throughout airborne, maritime, and ground environments. Warfighter-focused design and development is at the heart of Fuse processes. Throughout Fuse development our experienced team applies the best practices of commercial design-think, coupled to the DoD systems engineering framework. The coupling of commercially proven design with rigorous systems engineering gives Fuse an ability to rapidly design, develop and field solutions well inside of typical military design cycles. With an Agile approach to development (for both software and hardware) Fuse rapidly innovates, putting creative concepts into action, and refining those concepts through hands on test, user evaluation, and iteration. What you'll do: • Lead design and development of dynamic tactical communication systems consisting of hardware, network and software components, • Develop systems designs and solutions, • System interface design and cabling, • Create schematic, interface, and component diagrams, • Support integration between hardware, software, and network systems, • Manage requirements and specifications, • Derive subsystem requirements from customer/program requirements, • Conduct research and analysis of technical documentation to define and document system architecture and connections, • Leverage industry experts to find solutions to complex problems, • Create, review, and update technical documentation, and system diagrams, • Conduct and support test planning and execution, including flight test and demonstration, • Analyze test data, develop test reports, technology briefs and presentations, • Participate in demonstration planning with customers and overarching experiment managers, • Some travel will be required for hardware installation and/or test support, • Bachelor’s Degree in Information Systems, Engineering, Scientific or related Technical Field from an accredited college and 4-6 years professional experience or eight years equivalent experience, • Experience with engineering design and development, as well as testing and deployment of complex systems, • Ability to perform analyses and trade studies to aid in the selection of system components, • Self-starter with ability to work with minimal guidance and oversight, • Strong technical troubleshooting skills with the ability to trace technical issues within multiple systems, • Experience creating detailed system level interconnect block diagrams utilizing supplier data sheets, • Must be comfortable working on an active flight line, • Experience with U.S. Navy or other armed services warfare programs or systems Nice to have: • Experience working with networking, software, or mechanical engineering teams, • Experience in agile, professional software development environments utilizing revision control, test driven development and continuous integration, • Understanding of RF principles and link budget simulation, data analysis and data collection, • Knowledge of Navy Command, Control, Communications, Computers, Intelligence, Surveillance, and Reconnaissance (C4ISR) or other relevant systems, • Experience with network technology and protocols (OSPF, EIGRP, BGP, TCP/IP, DHCP), • Experience with NSA Type 1 cryptographic devices, • Experience with military and/or commercial SATCOM system integration and design, • Experience with multiple tactical data links and waveforms (L-16, TTNT, ANW2, etc.), • Experience with DoD Security Technical Implementation Guidelines Founded in 2010, Fuse is a veteran-owned, rapidly growing small business. Our San Diego-based company has earned recognition as an emerging leader in airborne, maritime, and ground networking. Placing the warfighter at the center of every design process, Fuse delivers intuitive, agile, and resilient products that go beyond national security requirements—providing lasting utility and game-changing results. We take pride in our brilliant and talented team as well as our dynamic environment and collaborative, creative, environment. We build cutting-edge hardware and software products that solve complex national security challenges for our warfighters at the tactical edge. Salary Range: $105,00 - $165,000 Benefits • Medical, Dental, and Vision, • Employee coverage is fully funded; a portion of dependents' coverage is funded as well, • 11 paid Federal Holidays, • Paid Time Off (PTO), • Date of hire through second year: 10 days/year (accrued), • After two years: unlimited, • 40 hours of paid sick leave per year, • 401k with employer matching, • Annual bonuses, • Cell phone reimbursement: $100/month

Job Description We are seeking a highly skilled and creative Automation Design Engineer to join our Automation Practice. This role is responsible for designing end-to-end automation solutions that align with business goals, technical architecture, and standards. The ideal candidate will combine strong technical expertise with process design thinking to deliver scalable, secure, and innovative automation systems. Requirements Key Responsibilities: • Solution Design, • Analyze business processes and design automation solutions that optimize performance and reduce manual effort., • Create detailed design documents, process maps, and technical specifications., • Collaborate with RPA developers, software engineers, and business analysts to ensure seamless implementation., • Architecture Alignment, • Ensure automation designs align with enterprise architecture and data models., • Contribute to the development of reusable design patterns and frameworks., • Integrate automation solutions with existing systems and platforms., • Innovation & Prototyping, • Support the Innovation Hub by designing and testing prototypes that demonstrate new automation capabilities., • Evaluate emerging technologies and recommend design enhancements., • Governance & Standards, • Adhere to CoE standards for documentation, metadata management, coding, and testing., • Participate in design reviews and contribute to the continuous improvement of design practices., • Security & Compliance, • Incorporate security and compliance requirements into automation designs., • Collaborate with security teams to ensure secure architecture and data handling., • Change Management & Communication, • Support change management efforts by documenting design rationale and communicating with stakeholders., • Bachelor’s degree in Engineering, Computer Science, Information Systems, or related field (Preferred)., • 3+ years of experience in automation design, process engineering, or solution architecture., • Strong understanding of automation technologies (RPA, workflow automation, scripting)., • Experience with process modeling tools (e.g., BPMN, Visio) and design documentation., • Experience working in a Center of Excellence or enterprise automation environment., • Knowledge of metadata management and technical documentation standards., • Exposure to AI/ML, low-code platforms, and cloud-based automation tools. Since 1993, ITP has been providing reliable, cost-effective solutions to meet our customers’ goals and objectives in the commercial and public marketplace. We are Women Owned Small Business Certified with a GSA IT 70 Schedule and a Navy SeaPort-e contract. We offer a full range of benefits, Health, 401K, Life, Disability, Student Loan Help, Bonuses...etc. Smart? Motivated? Ready to roll? You'll feel right at home at ITP. Where creativity is encouraged, initiative is rewarded, and reputations are made. A career here translates into continual opportunities to grow and expand on what you can do as we help clients become high-performance organizations. There's no better place to grow your career! If you wish to be part of this dynamic opportunity, please apply to this job posting.

Job DescriptionSummary Our client, located in San Diego, CA is a highly sought after, very successful mechanical general contractor. They are in immediate need of a Mechanical Project Engineer to join their high performing team. As a result of their unparalleled customer service and unique offerings, their business is experiencing impressive growth and with growth comes great opportunity for those with the ambition to accomplish great things. A career with our client is not just a job but an opportunity to join a family of people who care about each other and care about their customers.The ideal candidate will be responsible for assisting the Project Manager with project direction, planning, completion, and financial outcome. In order to succeed in this position, the candidate must be organized and have excellent time management skills. Duties & Responsibilities • Performs a key role supporting the Project Manager in all aspects of Plumbing & HVAC construction, • Works with and supports Field supervisors, • Attends project meetings as necessary, • Responsible for keeping project logs updated and current, • Prices change orders, • Handles all aspects of RFIs (Request For Information) in conjunction with Project Manager, • Assists in Submittal process, • Assists in procurement process, • Works with BIM department in a support role, attends BIM coordination meetings as necessary, • Downloads project files and distributes to team members, • Manages responses from design team and distributes to team members, • Assists in developing Man-loading charts in conjunction with foreman and Superintendents, • Ensures timeliness of submissions to Contractor, • Assists Project Manager in project projection process, • Performs printing and copying tasks as needed and directedQualifications & Requirements, • Mechanical, business degree, or related plumbing or mechanical systems experience, • Excellent communication skills, • Computer skills to include Microsoft Excel, Word and Project, • Able to listen and follow through on directions provided, • Desire to work in a team environment while learning on the job, • Education:, • B.S. in construction engineering management, • B.S. in construction management, • B.S. in Mechanical engineeringBenefits Offered, • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceEmployment Type: Full time Location: San Diego, CA

Job DescriptionDescription: MNS Engineers, Inc. (MNS) is a fast-growing profitable multi-service infrastructure consulting firm offering planning, construction management, civil engineering, and surveying services throughout California. With nine offices throughout California, the Company has provided services to the transportation, water resources, government services, and federal markets for over 60 years. We are well positioned in the marketplace, and on a trajectory to continue our geographic services expansion. MNS is hiring a Project Manager to apply technical skills and leadership of planning, design and management of transportation projects and related infrastructure for clients in the public sector. MNS is searching for a strategic Design Project Manager and people leader who will support the growth of our Water Resources department. While we support a hybrid/remote working atmosphere this person will need to be geographically located in either the Greater San Francisco Bay area, the Central Coast, Orange County/Los Angeles County, or the Inland Empire to be within commutable distance to our clients and projects. This position is ideal for someone who thrives with technical leadership related to municipal water and wastewater systems while valuing mentorship, autonomy, and the opportunity to build and lead a high-performing team of engineers. MNS offers a unique opportunity to grow your career with intention. We’re not a giant firm—we’re proudly midsized. That translates into a more flexible, entrepreneurial environment where individual contributions have a real impact, while still benefiting from the resources and reach of larger organizations. Our culture supports professional autonomy, innovation, and meaningful collaboration across offices. Because of this, we are proud to be recognized with the Great Place to Work certification for the second year in a row. This role will have a direct impact by serving as the client manager for projects and may also take on responsibilities to cultivate new industry relationships, in coordination with and support from the Engineering Market Leader, Business Development Manager, and other internal leaders and support staff. In this consulting engineering role, the ideal candidate will apply their technical expertise and leadership to the planning, design, construction, operation, and management of municipal water and wastewater systems—including, but not limited to, treatment plants and facilities, pipelines, pump stations, conveyance infrastructure, and storage facilities. Responsibilities: Water/Wastewater • Manage detailed planning and design efforts for a wide array of water and wastewater projects, ranging from collection and distribution to treatment and reuse with particular emphasis on projects associated with municipal scale systems. Including, but not limited to a combination of the following: treatment plants and facilities, pipelines, pump stations, conveyance infrastructure, and storage facilities., • Oversee work related to accepted engineering practices and techniques for water and wastewater treatment process and collection/distribution design., • Manage and participate in the development of engineering reports and studies for water and wastewater projects including treatment and collection/distribution., • Leverage existing, and build new, relationships to identify, position for, and pursue projects to maintain a backlog of work. General • Independently applies extensive and diversified knowledge of principles and practices in broad areas of assignments and related fields, • May also be responsible for the cultivation of new and maintenance of existing clientele, • Uses advanced techniques in the modification or extension of theories and practices of sciences and disciplines to complete assignments, • Works on a major project or several projects of moderate scope with complex features, • Prepares and reviews complete project documents for conformity and quality assurance, • Assists upper-level management and staff as a technical specialist or advisor, • Supervises all staff necessary to complete assignments, • Sets scopes, budgets, and schedules for assignments, • Prepares proposals to provide professional services under the direction of Principal Engineer, • Receives supervision and guidance relating to overall objectives, critical issues, new concepts, and policy matters, • Represent company at industry functions and assume leadership positions when possible, • Conducts job performance evaluations, • Assists with recruitment, • Primary point of contact with clients and approving agencies, • Responsible for project profitability, • Bachelor’s Degree in Engineering from an accredited program, • Professional Engineer License from the State of California, • Valid California driver’s license, • Continuing education as required for license and industry change developments, • Excellent oral and written communication skills, • Strong technical writing skills, • Ability to work on multiple projects of moderate size or portions of major projects, • Ability to design a complete project, system, component, or process, • Ability to formulate and solve problems, • Proficiency with Microsoft Software (Outlook, Word, Excel, PowerPoint), • Proficiency with specialized computer software: Autodesk Civil 3D, and various modeling software

Job Description Natilus is seeking a Manufacturing Engineer to join the manufacturing team in San Diego, CA. Your primary task would be creating manufacturing plans and studies for prototype and production aircraft. At Natilus, we work with a small team of highly adaptable engineers which enables us to accomplish the tasks of a much larger team. This gives you the opportunity to branch out into other technical disciplines such as mechanisms, manufacturing, stress analysis and tooling design as well as participate in the entire cradle-to-grave design process of multiple aircraft. Natilus is currently building a large 19,000lb unmanned aerial vehicle powered by twin turbo props. Our aircraft is a blended wing body with the sole purpose of carrying cargo. Making history utilizing multiple new technologies, it will be the first of its kind to fly and be put into production. The position is based out of San Diego and requires 20% travel. US Citzens or Permanent Residents may apply. Requirements • Experience creating manufacturing plans through blue prints and communication with the engineering team, • Capable of manipulating engineering models and designs to determine assembly sequences and trapped parts, • Support engineering team through review of design details and suggesting changes toward ease or economy of manufacturing, • Determines method and sequence of fabrication, assembly and final setup of assembly components, • Organize and assist build team and techs with day to day tasks and deliverables aligned with engineering schedule, • Proficiency in NX, CATIA, Unigraphics, or Solidworks, • A minimum of five years manufacturing or directly related work experience, • Hands on experience with composite and metallic parts and assemblies, • Experience with design as build manufacturing and using metrology for determinate assembly, • Comfortable setting up and operating power machine tools and accessories for machining of tools and dies, • Aircraft homebuilding or other hands-on design or build experience, • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays)

Job Description A leader in the Industrial Construction Manufacturing sector delivering complex capital projects across commercial, heavy industrial, and process facilities. We execute multi-discipline engineering, procurement, and construction programs on-site for clients across the United States—delivering projects on schedule, on budget, and with strong safety performance. Primary Title: Senior Project Engineer • Location: United States (On-site) Role Responsibilities • Lead technical delivery across the project lifecycle—scope definition, engineering review, procurement support, field execution, and closeout—ensuring alignment with schedules and budgets., • Develop, maintain and report project schedules and cost forecasts; drive corrective actions to hit milestones and financial targets., • Coordinate multi-discipline teams (civil, mechanical, electrical, instrumentation) and third-party contractors to resolve technical issues and enable continuous field progress., • Manage vendor selection, subcontracts, and change orders; ensure deliverables meet specification, quality, and safety requirements., • Perform engineering design reviews, constructability assessments, and site inspections; enforce quality control and compliance with regulatory and safety standards., • Bachelor’s degree in Engineering (Civil, Mechanical, Electrical) and 6+ years of hands-on project engineering experience in construction or industrial projects., • Proven track record managing on-site projects in the United States with strong schedule and budget ownership., • Proficiency with MS Project or Primavera for schedule control and common engineering software (AutoCAD/Revit)., • Experience with vendor/contract management and change-order processes., • Strong written and verbal communication skills for cross-functional coordination and stakeholder reporting., • PMP or PE certification, or Lean/Six Sigma exposure., • Experience with ERP systems (SAP) and familiarity with local permitting, codes, and OSHA safety standards., • Background in heavy industrial, process, or infrastructure projects with proven site leadership.Benefits Culture Highlights, • On-site, mission-driven teams with clear career pathways and technical mentorship., • Competitive compensation, health benefits, and 401(k) options (details discussed during hiring process).

Job Description We are looking for talented and motivated professionals to join our team! We invite you to apply for our open position(s) below. OPEN POSITION ANNOUNCEMENT! Senior IT Systems Engineer Open until filled. Posted 9/4/2025 San Diego County - hybrid work schedule set by Community Power ABOUT THE ROLE: Community Power is seeking a highly experienced Senior IT Systems Engineer to join our growing team of technology experts who are building a world-class IT & Data Analytics presence. A key priority of this role will be to provide advanced systems engineering services for Community Power's IT and data systems. The Senior IT Systems Engineer will implement, deploy, and monitor IT infrastructure and computing systems to empower Community Power staff with technologies and IT systems. This role will report to the IT Manager and will assist in ensuring that Community Power is effectively using the latest technology. WHO IS COMMUNITY POWER? Community Power is a community-driven, not-for-profit public agency providing cleaner energy to the San Diego region. Formed in 2019, Community Power is the second largest Community Choice Aggregator (CCA) in California, serving nearly 1 million customer accounts across its member agencies: the Cities of San Diego, Chula Vista, Encinitas, Imperial Beach, La Mesa and National City, as well as the unincorporated areas of San Diego County. OUR HISTORY Community Power was formed in 2019 as a public, not-for-profit community choice aggregator (CCA) in the San Diego region. We began electric service in 2021 and now serve seven member agencies: the Cities of San Diego, Chula Vista, Encinitas, Imperial Beach, La Mesa and National City, as well as the unincorporated communities of San Diego County. Community Power was formed to bring local control and customer choice to San Diego while also providing clean and renewable energy at competitive rates. We are the second largest CCA in California, serving nearly 1 million customers. For more information, please visit SDCommunityPower.org. COMMITMENT TO DIVERSITY At Community Power, we value diversity and are committed to creating an inclusive environment for all employees. We represent a diverse customer base and hope to hire employees that reflect our communities. We provide equal employment opportunities to all applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. ESSENTIAL DUTIES AND PRIMARY RESPONSIBILITES • Design, configure, and deploy network infrastructure (LAN, WAN, WLAN, VPN), server infrastructure (physical and virtual, primarily Windows Server), storage solutions, and cloud services (Microsoft Azure, Amazon AWS, Google Cloud)., • Perform advanced systems administration tasks, including server patching, configuration management, performance monitoring, troubleshooting, and capacity planning for both on-premises and cloud environments., • Manage and maintain network devices (firewalls, switches, routers, load balancers), ensuring optimal performance, security, and availability. Implement and enforce network security policies and procedures., • Architect, deploy, and manage resources within our Microsoft Azure, GCP and AWS environments, including virtual machines, storage, networking, security services, and serverless technologies. Optimize cloud costs and performance., • Implement and maintain security best practices across all systems and networks, ensuring compliance with relevant industry regulations and practices (e.g., HIPAA, GDPR, GxP, SOX). Participate in security audits and vulnerability assessments., • Ensure secure and reliable remote access for our remote users and contractors. Implement and support collaboration tools and platforms., • Participate in the development, testing, and maintenance of disaster recovery and business continuity plans for IT systems and infrastructure., • Create and maintain comprehensive documentation of network topologies, system configurations, procedures, and troubleshooting steps., • Liaise with external vendors for hardware, software, and services, ensuring effective communication and service delivery., • Lead or participate in IT infrastructure and systems projects, ensuring timely completion within budget and scope., • Stay current with new and emerging technologies, making recommendations when appropriate, including attending training courses and webinars., • Analyze business requirements by partnering with key stakeholders across the organization to develop solutions for their IT needs., • Collaborate and lead in root cause analysis and troubleshooting of hardware and software issues related to internal IT and their resolution., • Collaborate and lead in implementing broader IT strategies, IT policies, and best practices., • Collaborate and lead in creating and running workshops and training programs for staff., • Collaborate and lead in developing and managing intranet websites and content., • Assist other IT department members., • Other related tasks as required by the IT department. MINIMUM KNOWLEDGE, SKILLS, AND ABILITIES • Advanced working knowledge and experience dealing with IT infrastructure (on-premises and cloud), email exchange servers, networking, firewall, VoIP, audio & video conference room setup, and SharePoint administration., • Demonstrated experience in Microsoft 365, AWS, and Google Cloud environments., • Advanced knowledge of IT and data systems engineering, architecture, and design., • Advanced experience performing root cause analysis on internal and external data and processes to answer specific business questions and identify opportunities for improvement., • Advanced experience in leading the implementation of large IT projects across various technologies., • Excellent working knowledge of computer systems, security, network, systems administration, databases and data storage systems, and phone systems., • Strong critical thinking and decision-making skills., • Excellent project management skills and strong ability to prioritize., • Advanced experience in supporting IT infrastructure and end-user operations., • Advanced experience in implementing IT best practices., • Advanced experience supporting and working with cross-functional teams in a dynamic environment., • Experience in the energy sector and/or supporting the implementation of programs funded by California state agencies (e.g., California Public Utilities Commission, California Energy Commission, California Air Resources Board), • Ability to strongly represent the organization in various professional engagement settings from local to national convenings (conferences, workshops, executive meetings, etc.). QUALIFICATIONS, EDUCATION AND EXPERIENCE Any combination of education and experience that would provide the knowledge and abilities listed. A typical way to obtain the required qualifications would be: A four-year degree or higher from an accredited college or university AND a minimum of five (5) years of related professional experience. Experience: • Proven experience architecting, deploying, and managing infrastructure in Microsoft Azure, GCP, and AWS, including IaaS, PaaS, and SaaS offerings., • Relevant Azure and AWS certifications (e.g., Microsoft 365 Certified: Administrator Expert, Microsoft Certified: Azure Solutions Architect Expert, AWS Certified Solutions Architect - Professional) are highly desirable., • Microsoft software: Windows Server, Windows Client OS, Exchange, Intune, Defender, Purview, M365, Teams, SharePoint, Power BI, and Power Automate., • Amazon AWS, Microsoft Azure, and Google Cloud services., • Cisco/Meraki networking, firewall, and VoIP WORK ENVIRONMENT AND CONDITIONS Prolonged periods sitting at a desk and working on a computer. This position requires occasional carrying, lifting, and/or moving objects up to 25 pounds. Occasional local travel may be required as needed. At Community Power we work in the communities we serve and in the office. Community Power works to ensure a safe and healthy workplace for employees and in our communities. Community Power requires employees to be fully vaccinated for COVID-19. Exemptions to the vaccine requirement will be considered for individuals with medical conditions that prevent them from being vaccinated and for individuals with sincerely held religious beliefs that prohibit them from being vaccinated, consistent with governing labor laws. Community Power is an agency required to adopt and promulgate a Conflict-of-Interest Code ("COI"). The COI code requires employees in designated positions, including those identified under the interim disclosure process, to file a Statement of Economic Interests (Form 700) on an annual basis. A Successful candidate accepting this position may be required to file Conflict of Interest forms subject to the regulations of the Fair Political Practices Commission. Compensation: Salary Range: The position salary range is: $98,100 - $166,800; with exact compensation to be determined by Community Power, depending upon experience. Benefits: Standard benefits package including but not limited to: Insurance: Community Power covers 100% group health benefits, including medical, vision, and dental insurance, for eligible FT employees. Also provided is a $100,000 Life & AD&D policy, STD and LTD coverage that is 100% paid by Community Power. Retirement: Community Power offers a 457(b) plan for employee contributions and contributes 10% of eligible compensation to the employee's Money Purchase Plan. Paid Time Off: 11 holidays per year + paid winter holiday (between 12/24-12/31), 160 hours of accrued paid time off per year (increases with time in service), and 96 hours per year of accrued paid sick leave. This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at the discretion of Community Power as needed. California Pay Range$98,100—$166,800 USD

Job Description:\n\nDescription: Why clients love us: We are laser focused on delivering quality and excellence to our clients for their technology modernization needs, business and technology strategy, and cloud transformation initiatives. We are a nationally recognized Microsoft Partner of the Year and the largest, leading IT service provider headquartered in San Diego. As a Top 1% Microsoft Cloud Solution Provider, with engineers that individually hold over 38 Microsoft certifications, our clients trust us because we are the experts! The value you'll bring: As a member of our Professional Services department, the Senior Systems Engineer (Modern Workplace + Automation) helps design and deliver scopes of work related to client IT environments, with a strong emphasis on Microsoft Modern Workplace and Automation technologies. This position is highly customer-facing, works across a broad range of customer environments/industries, and has a strong focus on providing exceptional customer experiences and business outcomes. They are responsible for the following essential duties: Responsible for planning, delivering, and leading Microsoft365 migrations across full stack of Modern WorkplaceResponsible for designing, implementing, and remedying complex technology solutions in one or more of the following “subject matter expert” areas:Cloud Technology: Provides project design + implementation tasks and high-level troubleshooting for public, private, and hybrid cloud infrastructure, including Azure, AWS, Microsoft365, with a strong focus on migrations.Exchange/Messaging: Provides design, implementation, migration, and high-level troubleshooting services for Microsoft Exchange and messaging systems, including Microsoft365. Windows Servers: Provides project design + implementation, and high-level troubleshooting for infrastructure, including Windows Server (2019, 2016, 2012 R2, 2012, 2008 R2, 2003) and virtualization environments on both Hyper-V and vSphere, in addition to Citrix XenApp and/or XenDesktop, and Azure Virtual Desktop. Active Directory: Provides project design + implementation and high-level troubleshooting for Active Directory, including Azure Active Directory (Intra AD), Intune, AutoPilot, Group Policy, Access/Identity Management, AADS, Federation Services, Domain Controllers, etc. for medium to enterprise environments. Networking: Provides project design + implementation and high-level troubleshooting for networking infrastructure, including: Routing, switching, firewalls, WAPs, VPNs, load balancers, etc. in medium to larger LAN/WAN environments, including cloud environments (Azure, Amazon AWS). Provides senior consultative services and project work for Professional Services clients with a particular focus in Modern Workplace and Automation:Defines and completes project tasks, including scripting, related to workplace automation, leveraging Intune, SharePoint, Viva, Microsoft Fabric (PowerApps, Power Automate, Power Platform), etc. Responsible for designing, creating, and managing automated workflows to streamline client and internal business processes. Develops custom business applications using Power Apps in alignment with client/internal requirements. Creating interactive reports and dashboards with Power BI for data visualization. Successfully ties together multiple data sets from various sources, including the development of custom connectors for third-party or in-house APIs. Develops and presents proofs of concepts to project stakeholders. Utilizes Power Virtual Agents to create AI-powered chatbots and virtual assistants to function in accordance with client/scope parameters, including those related to data security and other governance requirements. Provides technical support and maintenance for Power Platform environments. Acts as a presales consult to help a client identify appropriate solutions, determine project scope, tasks, and budget requirements for Professional Services engagements, interfacing directly with sales team members as well as clients/prospects to understand existing environments, client goals/business objectives, and outline a solution. Scoping work may be limited to Rough Orders of Magnitude or smaller scale projects where a Solution Architect skillset is not required, or the Senior Systems Engineer may work in coordination with a Solutions Architect/Director to ensure appropriate scoping. Acts as project lead for assigned projects within the Modern Workplace + Automation focus area, directing others in completing project tasks according to project scopes; working with Project Managers or Sales to resolve potential/actual risks; and otherwise ensuring the successful delivery of services. Acts as a mentor to help develop the skillsets of Project Engineers and others, developing and delivering trainings; assisting on completion of project tasks; and otherwise helping support the success of other team members. May be responsible for developing and delivering effective customer or internal workshops/bootcamp sessions related to Modern Workplace and Automation, independently or in coordination with others as assigned. Completes additional, related responsibilities as assigned. Complies with all company policies, client security policies, and maintains strict confidentiality. Requirements: What makes you a fit... Education and Work Experience Requirements:Bachelors’ degree in Computer Science, Computer Engineering, or related field, plus a minimum of 8 years’ experience providing engineering within a Microsoft environment. Minimum of 5 years of experience in a consultative capacity at a systems integrator/MSP/other IT vendor, including experience in presales, project scoping, and project implementation. An equivalent combination of education, experience, and skillsets will also be considered. Experience planning, delivering, and leading Microsoft365 migrations across full stack of Modern Workplace is required.High levels of project ownership and individual accountability in a results-oriented environment. Demonstrated success as a project lead. Demonstrated commitment to continuous learning and innovation Demonstrated commitment to strong documentation and repeatable standards Demonstrated excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers Must be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices Technical Skills/Competencies: In addition to Subject Matter Expertise in their specialty areas, the Senior Systems Engineer (Modern Workplace/Automation) should have: Strong proficiency in developing solutions with Power Apps, Power Automate, and Power Virtual Agents. Significant experience developing within Canvas Apps, Model-Driven apps, and Power Apps Portals, as well as apps in Dataverse for Teams. Experience developing custom connectors against third-party or in-house APIs to successfully integrate data Experience developing bots in Power Virtual Agents (Bot Framework, Q&A maker is a plus) Experience developing, integrating, and extending Dynamics 365 apps Experience with CoPilot Studio Previous Office365 migration experience (both hybrid and cloud only) desired, as well as advanced Office365 administration and troubleshooting experience Microsoft certifications highly desired, and will be required for continued employment. The following certifications in particular are a plus: PL 200 – Microsoft Power Platform Functional Consultant; PL 400 – Microsoft Power Platform Developer; PL 600 – Microsoft Power Platform Solution Architect! Proficiency in Windows Server (all versions) and workstation implementation, administration, and troubleshooting Strong proficiency in Exchange (all versions/Online preferred), Hyper-V, Active Directory, and Powershell/VBS, SharePoint, and Teams. Working knowledge of Teams Voice, Skype for Business, Viva, and Office 365 strongly preferred. Proficiency with Teams as a Platform and limitations of Dataverse for Teams highly desired. Working knowledge of Intune policy management, including implementation experience. AutoPilot roll-outs and Apple Business Manager knowledge preferred. Strong proficiency in public cloud and virtualization technologies preferred: Azure, Office 365 & HyperV Utilization of Migration tools such as (ForensIT, Azure Migrate, BitTitan, Cloudiway, MoveriO, Sharegate, SPMT) Functional knowledge of Security and Identity Management, Okta, Public Key Infrastructure, SQL Server, or Linux/Unix/RedHat a plus! Time Zone/Availability Requirements: Given the nature of IT, some project work will need to be delivered outside of standard business hours. An ability to work a flexible schedule for occasional after-hours/weekend migrations and other project responsibilities is required. Managed Solution is a 24x7/365 operation and is headquartered in the Pacific Time Zone. While some flexibility may be offered for employees in other time zones, employees will need to be available to coincide with Company and client needs/policies. Remote/Onsite Requirements: Valid CA Drivers’ License, acceptable driving history, and reliable personal transportation will be required for San Diego-based Senior Systems Engineers, who may be required to travel to client sites within the San Diego region. Highly qualified applicants outside San Diego may be considered for remote positions. Such individuals may be required to travel on occasion to work sites or Managed Solution headquarters. Background Check Requirements: Individuals in this role will be subject to a background screening and reference check process as part of pre-employment screening. Members of the Professional Services team may be subject to additional screenings from time to time, as required by clients/partner agreements. Such screenings may include drug testing. An individual’s continued employment may be subject to the successful passing of such screenings. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Must be able to lift and carry up to?10?lbs. Must be able to talk, listen, and speak clearly on telephone.?The essential functions of this job require: the ability to frequently sit and stand for long periods of time; to manipulate objects with fine and gross motor skills; to communicate in written and spoken English; to hear; to utilize close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Managed Solution is an equal opportunity employer and will consider qualified applicants who can perform the essential functions of the job, with or without reasonable accommodation. E-Verify Participation: Federal law requires all employers to verify the identity and employment eligibility of all persons hired to work in the United States. Managed Solution participates in the federal E-Verify program to validate the authenticity of work eligibility documents. As part of this program, Managed Solution will provide the Social Security Administration (SSA) and, if necessary, the Department of Homeland Security (DHS), with information from each new employee’s Form I-9 to confirm work authorization. For more information, see . Compensation & Benefits* Base Wage Range: $110,000 to $150,000 per year ($4,230.00 - $5,770.00 biweekly) Managed Solution considers a range of factors when determining an appropriate wage. Such factors include but are not limited to: years of related experience, industry knowledge, formal education, relevant certifications, and geographic location. Wages are paid as earned and in accordance with Company policies. Additional Perks for Full-Time Employees: PTO – earn up to 10 days in year 1; 15 days in year 2; and 20 days in years 3+ 40 hours of Sick Time per calendar year 401k – Eligibility after 90 days; Managed Solution matches 50% of your first 6% in contributions, starting after 90 days Holidays – Managed Solution celebrates 7 paid holidays each year Plus, 1 Floating Holiday per Year… and 2 After 5 Years of Service! Medical, Dental, Vision – Managed Solution pays 80% of the employee cost on the base plan + 15% of dependent costs on the base plan (Optional Flexible Spending Account for eligible Health Care or Dependent Care costs) Telemedicine options: “see” a medical provider from anywhere, over the phone, 24/7 $100K Life/AD&D policy provided for all employees, free of charge! Employee Assistance Program – free financial consultation; counseling services; 24/7 traveler’s assistance; and more! $80/Month Cell Phone + Internet Reimbursement *All Company compensation and benefits programs are subject to Company policy and plan documents and are subject to change at Company’s sole discretion. Some programs may differ based on eligibility/availability/regulations in an employee's home state or locale. Why our employees love working here: We believe our strength comes from our differences, and we are committed to fostering and promoting a culture of diversity and inclusion. We believe our team and our community are our greatest assets and we strive to promote both. From providing our employees the time to pursue Microsoft certifications, to supporting and partnering with multiple non-profit organizations, we believe this is where healthy and happy employees thrive. As we grow, we are anchored and driven by our Core Values: I <3 IT! Integrity – We demonstrate consistent, trustworthy behavior. We are honest with everyone, take ownership (even in the face of failure), and do the right thing... even when no one is looking. Heart – We show genuine care for our community, our customers, and our culture. We believe people are at the heart of IT! We are authentic, inclusive, and take time to celebrate and enjoy one another's company. Innovation – We cultivate a diverse work environment and forward-thinking business by supporting an open exchange of ideas, driven by creativity and collaboration. We're dedicated to consistently delivering excellence through a ‘yes- to- what’s-next’ attitude. Teamwork – We work together and support one another to achieve a clear, common goal, while taking accountability for our own contribution's and the overall team's success. Managed Solution is Great Place to Work Certified! Inclusion & Equal opportunity employment: We are an equal opportunity employer committed to Diversity, Inclusion & Belonging. Individuals seeking employment at Managed So

Job Description Position Summary The position of the Senior Network Engineer will be responsible for production, development, and test environments of SDCCU’s network which includes but not limited to routers, firewalls, and switches. The responsibilities on these systems include engineering, deployment, provisioning, and maintenance of the network infrastructure, as well as research and development to ensure continual innovation within datacenter network, Local Area Network (LAN), Wide Area Network (WAN), and remote branch environments. Maintain quality service standards set by the organization. Minimum Qualifications (Education, Experience, Skills): • 6 years’ experience supporting applications and systems in a production environment, preferably for a SaaS software or financial organization., • Possess deep expertise in network protocols, network security, routing and switching., • Advanced and in-depth experience along with the fundamental understanding of at least one type of Network Operating System (ie. NX-OS, JunOS, Arista EOS), • Advanced and in-depth experience along with the fundamental understanding of at least one type of Network Security Operating System (ie. IPSO, PAN-OS, FortiOS), • Ability to work independently to accomplish assigned tasks., • Proven organizational and multi-tasking skills., • Effective verbal and written communication skills., • Project management skills, process-oriented with attention to detail., • Comfortable performing in a process-oriented and change-controlled working atmosphere., • Team player; should be able to communicate, lead and coach other team members, and to present to non-technical audience including customers., • Solution-oriented, constructive approach to problem-solving., • Familiarity with Cisco Systems and its various network solutions, • Familiarity with Check Point firewalls and its centralized management applications, • Working knowledge of VMWare, Microsoft Windows or Linux system administration is a plus Network Engineering • Network design, architecture, management, and deployment of new and existing routing, switching, and firewall infrastructure for multiple datacenter environments., • Deployment and management of new and existing WAN and VPN connections with associated collaboration with the business’ customers., • Proper execution of network and firewall change requests which support communications within the SDCCU environment for its customers and business units being conducted in accordance with corporate security policies., • Responsible for network performance and security monitoring in addition to being able to troubleshoot network-related issues in a logical manner, • Willingness to learn and work with potentially unfamiliar network operating systems and the ability to leverage automation tasks against repeatable network tasks, • Research, recommend, and develop innovative, and where possible, automated approaches for daily administrative tasks. Identify similar approaches that can also leverage SDCCU resources and provide economies of scale., • Responsible for vulnerability remediation and resolution efforts across various network systems., • Manage and facilitate the progress of assigned technical IT-related projects and taskings., • Participate in and contribute to Agile methodologies and sound engineering principles., • Perform daily system monitoring, verifying the integrity and availability of all network-related hardware, software, systems and key processes, and verifying completion of scheduled jobs such as network changes and its backups., • Provide Tier III and advanced-level network support requested from the engineering and operational departments; investigate and troubleshoot system hardware, software, and application issues from a network-focused perspective, • Configure and support related network services; ex. FTP, SFTP, HTTPS, VPN/ZTNA and remote access., • Analyze, troubleshoot and resolve potential networking issues supporting system hardware, software, and application services., • Demonstrate the ability to train operational departments with documented processes and procedures., • Lead or assist with applying necessary network-related updates and upgrades on a regular basis., • Perform maintenance to network and firewall devices during approved maintenance windows., • Maintain and administer systems and software licensing as needed., • Maintain and draft operational, configuration, and other procedural documentation., • Perform special projects as assigned., • Routinely provide after hours on-call support within SLA’s. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel objects, tools, or controls and talk or hear. The employee is frequently required to stand and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. The noise level in the work environment is usually moderate. Monday-Friday: 8:00am/5:00pm Full Time – 40 hours a week

Job Description About INOVIO INOVIO is a biotechnology company focused on developing and commercializing DNA medicines to help treat and protect people from HPV-related diseases, cancer, and infectious diseases. INOVIO’s technology optimizes the design and delivery of innovative DNA medicines that teach the body to manufacture its own disease-fighting tools. For more information, visit . Job summary The Senior Quality Engineer is an onsite position and very hands-on with Quality System elements such as NCMR’s, CAPA’s, Batch (DHR) release, change orders, drawing review, quality inspection records, and product disposition. The Senior Quality Engineer is responsible for developing, maintaining and analyzing supplier quality systems and procedures to ensure compliance with FDA regulations, corporate directives, ISO 13485 standards and company strategies. This position is also responsible for Quality input, technical support, conducting investigations, and providing guidance for Manufacturing, Engineering, and Regulatory Affairs, especially as related to product and components from suppliers. This position is responsible for performing investigations and inspections as necessary and identifying and implementing quality assurance testing models for analysis of raw materials, materials in process, and finished products. The Senior Quality Engineer assists in developing quality control policies and evaluates production challenges and determines improvement opportunities. Essential job functions and duties • Lead and conduct on-site supplier qualifying and monitoring audits representing Inovio in a professional manner to ensure compliance with company requirements and expectations, including appropriate regulations & standards (e.g., FDA’s 21 CFR 820, ISO 13485 & ISO 9001, etc.), • Leads root cause analysis of defects to identify and drive corrective actions. Ownership of QMS elements such as CAPA’s, NCMR’s, Complaints etc., • Develop, author, and implement quality assurance protocols for mechanical systems, components and product testing., • Perform GD & T evaluations on tolerance stack ups., • Conduct component validations at suppliers and internally, including writing comprehensive protocols and reports based on statistical analysis., • Present supplier performance metrics, including defect rates, trending data, and quality throughput., • Lead and collaborate with suppliers in a timely manner to address quality issues and non-conformances, driving implementation of process improvements through SCAR’s., • Maintain an updated supplier performance database, • Oversee product, component, assembly and process qualifications at suppliers., • Report discrepancies and positive/negative trends to management to drive process improvements., • Participate in the review of engineering specifications to ensure that adequate requirements are met., • Review drawings for adherence to design inputs; material callouts and standards and procedures; and regulatory and QS requirements; verify that required reports are attached so that the project can proceed to the next phase., • Support QMS systems and organizational growth, including participation in MRB meetings, Batch reviews, product release, and CAPA investigations., • Prepare and present detailed reports on quality metrics, supplier performance, and corrective actions., • Bachelor’s degree in Mechanical Engineering, Engineering, Quality Management or a related field, or equivalent related experience., • Minimum 10 years of experience with software driven electronic medical devices., • In depth experience in Quality within a medical device manufacturing environment with expertise in cGMP, QSR, ISO, MDD, and MDR regulations., • Minimum 3 years of experience in supplier audits and supplier qualification implementation., • Certifications such as Six Sigma Green/Black Belt or ASQ Certified Quality Engineer (CQE) a huge plus., • Strong knowledge of ISO 13485, FDA QSR Part 820, and EU MDR., • Experience with alternative Quality related tools (D and P, FMEA, QFD, SPC, Risk Analysis, DOE, and TQM) also a plus. Proficiency in Microsoft Word, Excel and Outlook, Visio, PowerPoint Visual Basic, Access, and Mini-Tab or other comparable statistical analysis software application., • Familiar with investigational tools such as 5-Whys, Fishbone Diagrams, Turtle Diagrams, etc., • Detail-oriented and organized in meetings and reviews., • Strong understanding of statistical methods., • Strong ability to write reports, business correspondence, and procedure manuals., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists., • Proven project management skills; able to complete technical projects on time and with limited supervision., • Have organizational, communication skills and the ability to perform varied tasks in a disciplined, consistent manner., • Ability to work individually or within a Team in a fast-paced and team environment., • Experience with sterilization validation (gamma/EO), design controls, and statistical analysis, • Familiarity with Class II/III medical devices INOVIO Pharmaceuticals, Inc. is an Equal Employment Opportunity Employer, including but not limited to veterans and individuals with disabilities. We prohibit discrimination of any kind. In keeping with our policy, we recruit, hire, train, and promote the most qualified individuals for all job titles, and we provide equal opportunities to all employees and applicants for employment. A current US work authorization is required. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. INOVIO offers an attractive benefits package and is an equal opportunity employer. Important notice to employment businesses/agencies INOVIO does not accept referrals from employment agencies unless written authorization from the INOVIO Human Resources department has been provided. In the absence of written authorization, any actions undertaken by employment agencies shall be deemed to have been performed without our consent and therefore INOVIO will not be liable for any fees arising from employment agency referrals in respect to current or future position vacancies at INOVIO.

Job DescriptionManufacturing Quality Engineer 2 needed for a contract opportunity with Yoh Scientific’s client located in San Diego, CA. This position is for a molecular diagnostics manufacturer and the team is looking for candidates with a bachelor's degree in a scientific discipline. Schedule: Monday – Friday, 8 am – 4:30 pm. Responsibilities • Provide ongoing quality engineering support throughout the product life cycle., • Provide support to manufacturing functions for validation planning and transfer activities., • Ensures adequacy of non-conformances and CAPA records, investigations, and corrective actions., • Become familiar with the applicable technology to facilitate participation in technical discussions and risk-based decision making., • Review equipment onboarding, calibration and preventative maintenance tickets and identify potential gaps for GMP compliance., • Review change requests/notices/approvals for compliance to change requirements outlined in applicable WIs/Procedures., • Develop and execute strategies to close gaps in an efficient, technical, and compliant manner., • Coordinate issue resolution using a risk-based approach., • Ensure manufacturing processes meet the requirements of FDA and ISO., • Trend, analyze, and report on quality data to improve product and process; develop recommendations based on data analysis., • Provide management with status updates on assigned responsibilities and goals and escalate issues in a timely fashion., • Collaborate with counterparts and cross-functional teams at other sites., • Bachelor’s degree in engineering or scientific discipline., • Work experience in a quality engineering role is desirable., • A minimum of 2 to 4 years of applied experience in the quality assurance field in a regulated environment; direct experience working in in-vitro diagnostic manufacturing is desirable., • Strong communication, facilitation, planning, problem-solving, and organizational skills., • Demonstrated effective collaboration skills with teams in multiple/global locations is desired., • Demonstrated ability or aptitude to learn how to manage and lead change., • Good judgment and decision-making skills; knows how to make trade-off decisions while balancing compliance and business impact., • Experience with quality and process improvement methodologies and tools desired., • Flexible, with ability to work effectively in a fast-paced, dynamic environment with shifting and competing demands., • Ability to execute strategy, approach, methods and actions on new assignments., • Is considered a subject matter expert for assessing and resolving complex quality issues., • Applied experience in meeting and applying quality regulations and standards (21CFR 820, ISO 13485, ISO 14971, MDD, IVDD, and CMDR) desired., • Experience with data mining, trend analysis, and statistical analysis., • Experience with electronic product life cycle (PLM), enterprise resource planning tools (ERP), manufacturing execution systems (MES)., • Experience with enterprise Quality System tools (e.g., electronic CAPA/NC, Change Management systems)., • Background in nanoimprint lithography and/or surface activation chemistry a plus. Recruiter: Ery Baniqued What’s In It For You?We welcome you to be a part of one of the largest global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. • Medical, Dental & Vision Benefits, • 401K Retirement Saving Plan, • Life & Disability Insurance, • Direct Deposit & weekly ePayroll, • Employee Discount Programs, • Referral Bonus ProgramsYoh makes finding and applying for jobs simple. Partner with Yoh to find the right opportunities across multiple industries in the US and UK. Find out more here! Estimated Min Rate: $35.50 Estimated Max Rate: $44.25 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: As a Senior RF Engineer, you will be responsible for designing advanced satellite wireless communication systems from concept to delivery. You will work across a variety of frequency bands—primarily L/S/X/Ka but extending to UHF and VHF—delivering solutions that meet demanding aerospace and defense requirements. This role blends deep technical expertise with leadership, as you will serve as both an individual contributor and a mentor to junior and mid-level RF engineers. Your work will span initial system architecture, detailed design, prototype validation, and final product delivery, ensuring high performance in complex communication environments. WHAT YOU'LL DO: • Lead the Design Process: Define RF hardware architecture, perform link budgets, noise-figure cascade analysis, and create detailed design specifications for satellite communication systems., • Develop and Validate Prototypes: Simulate, model, build, and test RF hardware using industry-standard tools and laboratory equipment, ensuring designs meet performance, environmental, and reliability requirements., • Mentor and Guide Engineers: Coach junior and mid-level engineers on RF design principles, simulation tools, and troubleshooting techniques, fostering a culture of technical excellence., • Troubleshoot Complex Issues: Lead root-cause investigations for hardware performance challenges, implementing design changes or corrective actions to resolve issues., • Interface with Cross-Functional Teams: Collaborate with systems, software, and mechanical engineers to ensure seamless integration and optimal system performance., • Manage the Design Documentation Process: Produce and maintain thorough design documentation—including simulations, test data, and tolerance analyses—per established guidelines., • Specify and Characterize Components: Identify, procure, and evaluate specialized RF components to meet stringent system-level requirements., • Support Production and Continuous Improvement: Work with manufacturing teams to improve yields, resolve production challenges, and enhance product reliability., • Represent Technical Excellence: Participate in and lead design reviews, presenting technical approaches and findings to internal teams and customers.YOU’RE AWESOME AT:, • RF System Expertise: Deep knowledge across VHF, UHF, L-, S-, X-, and Ka-band systems, with proven experience designing and validating RF front-ends, amplifiers, filters, mixers, and oscillators., • Hands-On Design & Testing: Skilled in using industry-leading RF simulation tools (e.g., ANSYS HFSS) and measurement equipment such as vector network analyzers, spectrum analyzers, and power meters., • Technical Leadership: Adept at mentoring engineers, leading design reviews, and driving resolution of complex hardware issues from prototype through production., • Bachelor’s or Master’s degree in Electrical Engineering, RF Engineering, or a related field., • 10+ years of hands-on RF/analog hardware design experience, preferably in aerospace, defense, or satellite communications., • Expertise across multiple RF bands (VHF, UHF, L-, S-, X-, Ka-)., • Proven skills designing and characterizing RF front-end components and subsystems., • Proficiency with RF simulation/modeling tools and advanced test/measurement equipment., • Strong troubleshooting skills for complex RF hardware challenges., • Experience creating detailed design documentation and hardware specifications., • Ability to mentor engineers and lead technical teams., • 401(k) with 3% company match (automatic enrollment), • Comprehensive medical, dental, vision, HSA & life insurance, • 10 paid holidays + 120 hours PTO (starting in year one), • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: . #LI-Onsite Powered by JazzHR D3oMjx3YPf

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: As a PCBA Test Technician, you will play a key role in supporting our team during a defined 6–8 week project. In this role, you will be responsible for testing, diagnosing, and debugging printed circuit board assemblies (PCBAs) at both the system and component level. This short-term assignment requires a mix of electronic hardware troubleshooting and software-driven diagnostics, including Python scripting for test automation. You will collaborate closely with design and manufacturing teams to identify root causes of failures, refine testing processes, and ensure our products meet the highest quality standards throughout the duration of the project. WHAT YOU’LL DO: • Test & Validate: Perform functional testing and validation of complex PCBAs according to established test procedures., • Troubleshoot Failures: Utilize test equipment (multimeters, oscilloscopes, power supplies, logic analyzers) to diagnose and repair at the component level., • Analyze Schematics: Read and interpret complex electronic schematics, assembly drawings, and datasheets to trace signals and pinpoint faulty components., • Automate Testing: Develop, debug, and maintain Python scripts for automated test sequences, data logging, and hardware validation., • Run Diagnostics: Interface with PCBAs using the Linux command line and shell scripts to check logs, run diagnostics, and support debugging., • Document Work: Meticulously record test results, failure analysis findings, and repair actions in the company’s tracking system., • Collaborate: Partner with hardware and software engineers to support root cause analysis and continuous quality improvements., • Troubleshooting PCBAs: Skilled at diagnosing and repairing printed circuit board assemblies down to the component level., • Using Test Equipment: Proficient with oscilloscopes, multimeters, logic analyzers, and other diagnostic tools., • Python & Automation: Experienced in writing and maintaining Python scripts for test automation and hardware interaction., • Technical Interpretation: Able to read schematics, datasheets, and assembly drawings with accuracy., • High school diploma or equivalent required; Associate degree or higher in electronics, engineering, or related field preferred., • 2+ years of hands-on experience troubleshooting PCBAs at the component level., • Proficiency with standard electronic test and measurement equipment., • Strong ability to read and interpret schematics and datasheets., • Proficiency in Python scripting for test automation and hardware interaction., • Familiarity with Linux command line and basic shell scripting., • Strong analytical problem-solving skills and attention to detail., • Employment Type: Temporary, project-based assignment (6–8 weeks)., • Benefits: As this is a temporary role, benefits may be limited; details will be provided during the hiring process., • Note: This is a temporary, project-specific role. Employment will conclude at the end of the assignment unless otherwise extended.WHY YOU’LL LOVE WORKING HERE, • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: . #LI-Onsite Powered by JazzHR ccwu15aU34

Job Description GROW WITH US AND STAY EXTRAORDINARY: Launch your career to new heights with Innoflight—one of San Diego’s fastest-growing Aerospace and Defense innovators. Here, visionary minds engineer the future of space technology through pioneering, compact, and cyber-secure solutions. From software-defined radios to cutting-edge cryptographic systems and avionics, everything we build powers the next era of New Space. Join our small, agile, and mission-driven team where your work has real impact and your growth has no limits. We’re not just reaching for the stars—we’re engineering them. Let’s innovate the infinite, together. A DAY IN THE LIFE: As a Hardware Engineer II, you'll design and develop analog, power, and embedded systems for next-gen spacecraft. You’ll work across multiple projects, collaborating with cross-functional teams to deliver high-performance space hardware from concept to launch—guiding PCB layouts, solving complex challenges, and ensuring signal integrity throughout the design process. You’ll also be deeply involved in performance testing, sustainment support, and the continuous enhancement of mission-critical electronic systems. WHAT YOU’LL DO • Design and Develop Hardware Systems: Lead the design, testing, and debugging of analog, power, and embedded board-level electronic systems with high-speed digital interfaces such as Rocket I/O, Ethernet, PCI-e, DDR, RS-422, and LVDS., • Provide PCB Design Support: Guide internal and external layout teams with stack-up configuration, signal/power integrity requirements, and high-speed routing constraints., • Collaborate Across Disciplines: Work closely with software, firmware (HDL), mechanical, and systems engineers to ensure full subsystem integration; contribute to peer design reviews and mentor junior engineers., • Create and Review Documentation: Develop and review detailed specifications, Interface Control Documents (ICDs), test procedures, and user manuals for new and existing hardware., • Conduct Signal and Power Integrity Analysis: Simulate circuitry in SPICE and perform advanced signal and power integrity analysis to ensure robust performance in radiation- and EMI-sensitive environments., • Embedded Hardware Design: You’re a schematic design pro, with deep experience in development and debugging of board-level systems., • High-Speed Interface Design: You know how to design, simulate, and troubleshoot high-speed digital interfaces, applying best practices in signal integrity., • Bachelor’s degree in Electrical Engineering or a related discipline., • 3 or more years of experience designing and developing embedded and board-level electronic hardware., • Proficient in high-speed digital and analog circuit design, including PCI-e, DDR, LVDS, and switching power supplies., • Hands-on experience with microprocessor-based systems, FPGAs, digital logic, memory architectures, and power electronics., • Skilled in schematic capture and PCB design tools (e.g., Altium, OrCAD, HyperLynx) and knowledgeable in signal/power integrity and simulation., • Strong collaborator with cross-functional teams; experience with EMI/EMC compliance, radiation testing, and scripting in Python or PowerShell., • 401(k) with 3% company match (automatic enrollment), • Comprehensive medical, dental, vision, HSA & life insurance, • 10 paid holidays + 120 hours PTO (starting in year one), • Flexible Work-Life Balance: Enjoy a 9/80 work schedule with every other Friday off—whether you use it to recharge, work on a passion project, or spend time with family, the choice is yours., • Continuous Learning & Development: We’re serious about professional development. From tuition reimbursement to internal "Ask Me Anything" sessions and weekly “Lunch & Learns,” we make learning a core part of the job. YOU SHOULD KNOW: Potential new employees must successfully complete a background check which includes criminal search, education certification and employment verification prior to hire. Applicants must be authorized to work for any employer in the U.S as you must have the ability to obtain a security clearance. We are unable to sponsor or take over sponsorship of an employment Visa. A NOTE TO STAFFING AGENCIES: Innoflight does not accept unsolicited resumes from agencies, recruiters, or any third-party sources. Any such submissions will be considered property of Innoflight, and no fees will be paid in the event a candidate is hired from an unsolicited referral. To California residents applying for this job, please read Innoflight’s CCPA Notice: . #LI-Onsite Powered by JazzHR hfFb4LSCUH

Job DescriptionSalary: $180,000 - $220,000 About Us:PMAT is an innovative small business founded with a passion for developing forward-leaning solutions from exceptional people that increase the mission's capability. We focus on designing and building impactful digital solutions that utilize modern cloud, data, and software concepts. Our passion is working on complex and progressive challenges such as edge platform computing, containerizing legacy platforms, distributed data platforms, or heterogeneous data analysis. We recruit, retain, and foster a team motivated to pursue passions, investigate new ways of doing things, and embody an innovative and entrepreneurial spirit. We believe in being curious about every element of a problem and experiment relentlessly. We foster continuous learning in an environment that encourages positive collaboration and expands our capabilities. We tap into collective intelligence, acknowledging that the most brilliant people may not be in the room. Above all else, we believe that delivering and demonstrating is more potent than a sheet of paper. We are passionate about mission-centric design and delivering effective capabilities to and for the warfighter. Whether youre an experienced engineer or just beginning your career, youll work alongside experts who are committed to solving mission-critical problems. If youre passionate about using your skills to make a real difference, apply today and become part of a team thats shaping the future of defense technology! About the role: We are seeking a highly experienced and dynamic Fleet Engagement and Integration Lead to spearhead the delivery of advanced information warfare capabilities to our Naval, Joint, and Coalition warfighters. As the fleet engagement coordinator for the Joint Fires Network (JFN), you will possess an in-depth understanding of emerging JFN technologies and their operational applications for USN. This role requires a proven leader capable of fostering cross-functional collaboration, driving innovation, and ensuring the seamless integration of cutting-edge technologies into the operational environment. A key aspect of this role is championing the Joint Fires Network to Maritime Operations Centers (MOCs) and driving its adoption across USN. The ideal candidate will possess a deep understanding of the Fires and Authorities process. Responsibilities: • Fleet Engagement Coordinator for Joint Fires Network (JFN): Serve as the primary fleet engagement coordinator for the Joint Fires Network (JFN), responsible for maintaining an expert-level understanding of emerging JFN technologies and their operational application for USN and its sailors., • Joint Fires Network (JFN) Champion: Champion the Joint Fires Network to Maritime Operations Centers (MOCs/OMIOCs), driving its adoption and ensuring its effective utilization across USN., • Fires and Authorities Expertise: Possess a deep understanding of the Fires and Authorities process, enabling effective integration of information warfare capabilities into the overall Joint targeting process., • LVC Operations Leadership: Support Live, Virtual, and Constructive (LVC) operations across four distinct mission areas, including FLEX experimentation, Fleet Reps and Sets, Combined Joint All Domain Command and Control (CJADC2), and JFN Lab Demonstrations. Support flawless execution of JFN related LVC events and the delivery of critical engineering developmental feedback to NAVWAR program offices., • Cross-Functional Team Leadership: Lead and mentor cross-functional teams of engineers, scientists, and IT specialists to successfully integrate emerging JFN technologies at U.S. Navys Maritime Operations Centers (MOCs)., • Joint Fires Integration: Leverage a strong understanding of the Joint Fires Network and its operational relevancy across COCOMs to ensure seamless integration of information warfare capabilities into the overall Joint warfighting architecture., • Model Based Systems Engineering Support: Coordinate with existing MBSE teams to enable the Model Based Systems Engineering team to create holistic naval models that will inform future JFN network architecture design with Naval and Joint Forces., • Operational Planning and Exercise Support: Contribute to future planning efforts for Operational Plans and Joint exercises, collaborating with Joint, National, and international coalition stakeholders to ensure operational staff are trained and ready to lead maritime forces in combat., • Strategic Communication: Regularly brief Flag Officers and SESs on the status of JFN integration efforts, LVC event outcomes, and the operational impact of information warfare capabilities., • Innovation and Capability Advancement: Continuously seek out opportunities to advance the Navy's warfighting capabilities through innovative JFN applications, the integration of technology, and the refinement of maritime operational plans., • Cross-functional Coordination: Enhance cross-functional coordination across multiple organizations, including NAVWAR program offices, Fleet elements, and Joint Forces, to enable the adaptation of new warfighting capabilities and Fight from the MOC initiatives., • Information Warfare Capability Delivery: Responsible for delivering information warfare capabilities for our Naval, Joint, and Coalition warfighters through research, development, delivery, and support of integrated capabilities. Required Skills and Experience: • Ideally, ten plus (10+) years of US Navy military experience as a Surface Warfare Officer (SWO)., • Excellent communication, interpersonal, and presentation skills., • Proven ability to brief senior leadership (Flag Officers and SES personnel)., • Proven experience as an Exercise and Fleet Operational Planner., • Surface Warfare expertise across multiple platforms/areas (DD, CG, DDG, LSD, MOC, OMIOC)., • Preferably demonstrated technical and tactical experience as a Fire Controlman and Fire Control Officer., • Deep understanding of the Fires and Authorities process from a surface warfare perspective., • Experience with Navys contribution to the Joint Fires Network (JFN). Prior experience embedded at NAVWAR/NIWC on the Joint Fires Network (JFN) is highly desirable., • Familiarity with the Joint Fires Network and its operational relevancy across COCOMs., • Proven ability to lead and mentor cross-functional teams of technical professionals., • Strong understanding of Live, Virtual, and Constructive (LVC) environments and experience in planning and executing complex LVC events., • Passionate and driven professional with a commitment to advancing the Navy's warfighting capabilities., • Experience assisting with the refinement of Top Secret maritime planning which support multiple joint operations and potential contingencies. Education and Certification Requirements: • Bachelors degree required; STEM related bachelors or masters degree preferred. Citizenship and Clearance requirements: • US Citizenship and no dual citizenship, • Active TS SCI clearance Location: • PMAT office and NAVWAR Old Town complex, both located in San Diego, CA Work Environment: PMAT offices as needed. In some cases, work in a government facility may be required. Travel may be required for customer engagement, team coordination, and potentially for business development. PMAT is an equal-opportunity employer.We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture.We are committed to non-discrimination onanyprotectedbasis, such as disability and veteran status, or any other basis covered under applicable law. #CJ

Job DescriptionSummaryOur client, located in San Diego, CA is a highly sought after, very successful mechanical general contractor. They are in immediate need of a Mechanical Project Engineer to join their high performing team. As a result of their unparalleled customer service and unique offerings, their business is experiencing impressive growth and with growth comes great opportunity for those with the ambition to accomplish great things. A career with our client is not just a job but an opportunity to join a family of people who care about each other and care about their customers.The ideal candidate will be responsible for assisting the Project Manager with project direction, planning, completion, and financial outcome. In order to succeed in this position, the candidate must be organized and have excellent time management skills. Duties & Responsibilities • Performs a key role supporting the Project Manager in all aspects of Plumbing & HVAC construction, • Works with and supports Field supervisors, • Attends project meetings as necessary, • Responsible for keeping project logs updated and current, • Prices change orders, • Handles all aspects of RFI’s (Request For Information) in conjunction with Project Manager, • Assists in Submittal process, • Assists in procurement process, • Works with BIM department in a support role, attends BIM coordination meetings as necessary, • Downloads project files and distributes to team members, • Manages responses from design team and distributes to team members, • Assists in developing Man-loading charts in conjunction with foreman and Superintendents, • Ensures timeliness of submissions to Contractor, • Assists Project Manager in project projection process, • Performs printing and copying tasks as needed and directedQualifications & Requirements, • Mechanical, business degree, or related plumbing or mechanical systems experience, • Excellent communication skills, • Computer skills to include Microsoft Excel, Word and Project, • Able to listen and follow through on directions provided, • Desire to work in a team environment while learning on the job, • Education:, • B.S. in construction engineering management, • B.S. in construction management, • B.S. in Mechanical engineeringBenefits Offered, • 401(k), • 401(k) matching, • Dental insurance, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job DescriptionDescription: PROJECT ENGINEER / ASSISTANT PROJECT MANAGER (APM): Project Engineers & Assistant Project Managers (APM) assist the Project Manager and Project Superintendent in bidding, tracking down subcontractor releases, project billings, helping with RFIs, project scheduling and other administrative management. Engineers & Estimators communicate with project owners, architects, subcontractors and office. If you are looking for an exciting opportunity to work on the top residential construction projects being built on the West Coast, you may qualify for a rewarding career at Hill Construction Company. We are currently looking to add an Assistant Project Manager to our dynamic Palm Desert team. The Company Hill Construction Company sets the standard in luxury homebuilding, combining highly skilled craftsmanship with progressive technical expertise. With jaw-dropping projects being built in San Diego, Los Angeles, Orange County, Las Vegas, and Palm Desert, we collaborate with the area’s most elite and celebrated architects and designers. Our homes are consistently showcased in national and regional magazines including dwell, luxe, Interiors, California Homes, and more. Continual advancement, uncompromised quality, and passion for excellence have led Hill Construction to win numerous industry awards and accolades. Please learn more about us by visiting and exploring our Instagram. Benefits Full-time employee benefits include health, dental, and vision insurance, Paid Time Off, 401k retirement plan with employer matching, cell phone reimbursement, fuel reimbursement, and a potential year-end bonus. We pride ourselves on our company culture – one in which every employee has the opportunity to collaborate, contribute, and help shape the future of our growing corporation. Overview As an industry leader, Hill Construction excels in making the most technical projects look effortless and turning a dream into a home. In order to continue growing and servicing our clients, our Palm Desert team is looking to add a qualified and enthusiastic full-time Assistant Project Manager (APM). The APM is a critical component of our winning team structure working alongside Project Managers and Superintendents on various custom construction projects. APMs are responsible for the management of project documentation and helping ensure quality and contractual risk management throughout the project life cycle. Responsibilities Hill Construction Project Managers and Assistant Project Managers team up, alongside the Superintendent, to manage all areas of the construction process. Day-to-day responsibilities of the APM include: • Bidding / Estimating, • Budgeting, • RFI Management, • Subcontract Management, • Purchase Order Management, • Shop Drawing Management, • Change Order Management, • Project Billing Review/Approval, • Risk Management and Forecasting, • Submittal and Procurement Management Requirements: Qualifications • Bachelor’s Degree (Construction Management, Engineering, or related field)., • 1-2 years minimum direct experience with project schedules, RFIs, estimates, budgets, and contracts., • Ability to read/bid construction plans., • Comprehensive knowledge of subcontractor scopes., • Ability to clearly and effectively communicate with project owners, architects, and our office team., • Computer proficiency (Microsoft Office, Management Software)., • P6/On-Center/Revit/Bluebeam/MS Project experience a plus., • Sage/Timberline experience a plus., • Willingness to regularly visit and walk job sites as well as work in the office., • Candidate must possess Hill Construction’s core values: passion, integrity, hard work, and professionalism., • Ability to sit and/or stand for extended periods, walk job sites with ease, and bend/stoop as needed., • Ability to lift or maneuver boxes without accommodation.

Job DescriptionDescription: PROJECT ENGINEER / ASSISTANT PROJECT MANAGER (APM): Project Engineers & Assistant Project Managers (APM) assist the Project Manager and Project Superintendent in bidding, tracking down subcontractor releases, project billings, helping with RFIs, project scheduling and other administrative management. Engineers & Estimators communicate with project owners, architects, subcontractors and office. If you are looking for an exciting opportunity to work on the top residential construction projects being built on the West Coast, you may qualify for a rewarding career at Hill Construction Company. We are currently looking to add a Project Engineer to our dynamic San Diego team. The Company Hill Construction Company sets the standard in luxury homebuilding, combining highly skilled craftsmanship with progressive technical expertise. With jaw-dropping projects being built in San Diego, Los Angeles, Las Vegas, Orange County, and Palm Desert, we collaborate with the area’s most elite and celebrated architects and designers. Our homes are consistently showcased in national and regional magazines including dwell, luxe, Interiors, California Homes, and more. Continual advancement, uncompromised quality, and passion for excellence have led Hill Construction to win numerous industry awards and accolades. Please learn more about us by visiting and exploring our Instagram. Benefits Full-time employee benefits include health, dental, and vision insurance, Paid Time Off, 401k retirement plan with employer matching, cell phone reimbursement, fuel reimbursement and a potential year-end bonus. We pride ourselves on our company culture – one in which every employee has the opportunity to collaborate, contribute and help shape the future of our growing corporation. Overview As an industry leader, Hill Construction excels in making the most technical projects look effortless and turning a dream into a home. In order to continue growing and servicing our clients, our San Diego team is looking to add a qualified and enthusiastic full-time Project Engineer (PE). The PE is a critical component of our winning team structure working alongside Project Managers and Superintendents on various custom construction projects. PEs are responsible for the management of project documentation and helping ensure quality and contractual risk management throughout the project life cycle. Responsibilities Hill Construction Project Managers and Project Engineers team up, alongside the Superintendent, to manage all areas of the construction process. Day-to-day responsibilities of the PE include: • Bidding / Estimating, • Budgeting, • RFI Management, • Subcontract Management, • Purchase Order Management, • Shop Drawing Management, • Change Order Management, • Project Billing Review/Approval, • Risk Management and Forecasting, • Submittal and Procurement Management Requirements: Qualifications • Bachelor’s Degree (Construction Management, Engineering, or related field)., • 1-2 years minimum direct experience with project schedules, RFIs, estimates, budgets, and contracts., • Ability to read/bid construction plans., • Comprehensive knowledge of subcontractor scopes., • Ability to communicate with project owners, architects, and our office team clearly and effectively., • Computer proficiency (Microsoft Office, Management Software)., • P6/On-Center/Revit/Bluebeam experience a plus., • Sage/Timberline experience a plus., • Willingness to regularly visit and walk job sites as well as work in the office., • Candidate must possess Hill Construction’s core values: passion, integrity, hard work, and professionalism., • Ability to sit and/or stand for extended periods, walk job sites with ease, and bend/stoop as needed., • Ability to lift or maneuver boxes without accommodation.

Job Description As a Mechanical Engineer at Q Microwave, you will be responsible for the mechanical design and integration of advanced RF components, including the packaging of RF boards and components into robust, manufacturable mechanical housings. You will collaborate with cross-functional teams including electrical, RF, manufacturing, and assembly of custom RF hardwarefrom initial concept design to full-rate production. Requirements Key Responsibilities: • Design and develop mechanical enclosures and hardware for RF filters and integrated RF subassemblies., • Integrate CCA (Circuit Card Assemblies), Connectors, and RF board layouts into precision-machined mechanical housings that meet harsh environments RF/mechanical requirements (e.g. hermeticity, vibration, temperatureetc)., • Collaborate with RF and electrical engineering teams to ensure alignment of PCB and mechanical designs., • Utilize CAD tools (e.g., SolidWorks, AutoCAD) for 3D modeling, detailed drawings, and tolerance analyses., • Perform thermal and structural analysis to ensure design robustness in defense and aerospace environments., • Support transition to manufacturing, including documentation, tooling and fixture development, and design-for-manufacturability efforts., • Assist with prototype builds, design reviews, product testing, and root-cause analysis., • Work closely with local manufacturing and supply chain teams to support material selection, process optimization, and production readiness., • Generate and maintain manufacturing drawings, BOMs, and engineering change documentation per Q Microwave and Amphenol standards., • The ability to work independently and proactively resolve work issues or notify supervisors of the resources needed. The ability to coordinate with other employees and work as part of a cross-functional team Minimum: • Bachelor's degree in Mechanical Engineering, Aerospace Engineering, or Technical Field, • Three - Five (3-5) years of working in product development, mechanical design, or manufacturing of RF or electronic products., • Experience with mechanical integration of PCBs, RF structures, connectors, and other electrical components., • Proficient in basic office tools including Microsoft Office (Excel, Word,, • PowerPoint) and email platforms, • Proficient in CAD tools such as LabView, AutoCAD, Solidworks or similar 3D CAD software., • Eight (8) to Ten (10+) years experience., • Masters Degree in a Technical Field., • Active Security Clearance or ability to obtain and maintain security clearance., • Familiarity with high-frequency RF performance constraints related to mechanical design (e.g., grounding, shielding, thermal management)., • Familiarity with component selection for high-reliability/aerospace/defense applications., • Excellent technical communication, documentation, and organizational skills., • Flexibility in work schedules and task assignments; some overtime may be required., • Basic computer skills and the ability to read and understand basic English., • Strong organizational skills and attention to detail., • A team player with good communication skills.

Job Description Job Description: Bilingual Master Scheduler / Process Engineer Location: Otay Mesa – San Diego, CA 92154 Job Type: Full-Time | Temp-to-Hire Compensation: $30/hour Reports To: Plant Manager / Director of Operations Position Summary We are seeking a highly organized and analytical Bilingual Master Scheduler / Process Engineer to join our operations team in a fast-paced food manufacturing environment. This dual role is critical in leading both production scheduling and process improvement initiatives, ensuring efficient resource utilization, optimized production flow, and compliance with strict quality and food safety standards. The ideal candidate is detail-oriented, proactive, and capable of balancing scheduling demands with engineering-driven process enhancements. Key Responsibilities Master Scheduler Duties • Develop, maintain, and execute the Master Production Schedule (MPS) based on forecasts, customer demand, inventory levels, and plant capacity., • Collaborate with procurement, production, logistics, and quality teams to ensure alignment across the supply chain., • Issue daily and weekly production schedules, coordinating with shift supervisors to meet deadlines and ensure on-time delivery., • Monitor and adjust schedules to address downtime, labor availability, or material shortages., • Analyze current production processes to identify bottlenecks, inefficiencies, and cost-saving opportunities., • Lead continuous improvement projects using Lean, Six Sigma, or similar methodologies., • Develop, update, and enforce Standard Operating Procedures (SOPs) to ensure compliance with GMP, food safety, and regulatory standards., • Support new product introductions by assessing process impacts and implementing improvements., • Bachelor’s degree in Industrial Engineering, Manufacturing, Supply Chain, or related field (or equivalent experience)., • 3–5 years of experience in production scheduling, process engineering, or manufacturing operations—food processing/CPG industry strongly preferred., • Bilingual (English/Spanish) required to effectively communicate with diverse teams., • Strong knowledge of ERP/MRP systems (SAP, Oracle, JD Edwards, etc.)., • Proficiency with data analysis tools (Excel, Power BI, or similar)., • Understanding of GMP, food safety standards, and quality assurance practices., • Proven ability to lead cross-functional projects and process improvements., • Lean Manufacturing or Six Sigma certification preferred. Company DescriptionOur Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.Our Professional Division works with clients as a stakeholder in their hiring strategy and process. We facilitate a solid match for our employees and clients, examining the experience and team dynamics required for a great match. Our professional team was handpicked from 25 years of recruiting and staffing experience to build our Professional team to be the best in the industry. We focus on professional placements in your Executive Placement, Accounting & Finance, Human Resources, and Administrative Support areas. We place candidates leveraging direct hire, contract-to-hire, contingent, and “Smart Hire” modalities.

Job DescriptionFull Stack Java Support Engineer Location: IN OFFICE 5 days a week- San Diego About Tillster Tillster, headquartered in the USA, is the global leader in digital ordering and customer engagement solutions. For over a decade we have developed revolutionary self-service, ordering and payments solutions – for mobile, tablet, online, kiosk, call center, and more – creating personalized interactions based on consumer preferences, language, and currency. Our platform is compatible with 15+ unique POS systems, representing over 90% coverage in multi-unit restaurants. We offer one platform; one scalable, enterprise class solution – to create world-class digital engagement solutions. Our mission and passion are one in the same: Empower restaurants and consumers to engage and transact anywhere, anytime, and from any device - one consumer at a time, one order at a time, billions of times over. In doing so, together we are transforming e-commerce in restaurants and make the till grow for Tillster and our customers. What You'll Do Full Stack Java Support Engineer • Monitor the production application and identify errors and issues before they impact customers., • Full Stack Developer Preferred but minimum a Java expert.., • Proactive production maintenance., • Investigate production bugs/issues with Engineering., • Manage production incidents / outages., • Implement application monitoring., • Respond to and resolve application alerts., • Support Engineering with privileged data access requests., • Suggest product improvements and work with product management to identify new features to reduce support burden., • Support User Acceptance Testing (UAT) and provide product feedback., • Manage on-call duties as scheduled. Support Customer Facing Teams (Support/TAM/SE/CS), • Troubleshooting escalated customer issues to determine root cause and coordinate with various teams to develop solutions or workarounds., • Identifying solutions to the challenges customers are facing - either by explaining the product functionality or by developing technical workarounds., • Validating and reproducing customer reported bugs and escalating to Engineering & Product., • Performing product optimizations for specific customers including optimizing backup or seeding speed and configuring API usage., • Performing specific privileged duties in the production environment for customers including aborting backups or seeding jobs, optimizing specific objects and add/remove objects from backup or seeding jobs, changing master admin email address, and changing the fetcher pool size for optimal application response time., • Support Proof of Concepts (POCs) and trials ensuring customers issues are escalated expeditiously and reducing issues during the sales cycle., • Improve support knowledge base and automation to enable the front-line support teams. Required Skills & Experience • Full Stack Developer Preferred but minimum a Java expert., • Strong Windows proficiency - a MUST, • A minimum of 2-3+ years of experience as either support Engineer, test engineer or as a software engineer., • Proven technical troubleshooting skills with solid understanding of tech support environment., • Experience with POS or Kiosks a plus, • Cloud experience required. AWS and Azure preferred., • Database knowledge - relational and object oriented. PostgreSQL and MariaDB experience a plus, • SQL knowledge - intermediate level queries, • Knowledge of Salesforce / ServiceNow / Dynamics CRM - a strong advantage., • Fluent in English - working with global teams, • Highly customer oriented., • Outstanding communication skills., • Strong sense of urgency., • Experience in writing scripts in Java/Windows Batch Files/Powershell, • Experience with Enterprise Software, B2B SaaS and/or in 24x7x365 organizations., • Programming skills - a must • Recruiter interview with a Talent Acquisition Specialist., • Interview with Tech Support Team, • Expected base salary ranges $105,000 - $125,000. Total starting compensation will be determined based on all lawful criteria, Company policy and best practices., • Equity: All employees within the U.S. are eligible to participate in the Stock Option Plan., • Health Benefits: All full-time, regular employees and their dependents are eligible for medical, dental, vision and FSA benefits. Additional health benefits include Healthcare and Dependent Care reimbursement programs, Employee Assistance Program (“EAP”) and Optum Care 24-hour confidential medical counseling services., • Holidays: The company observes ten (10) paid holidays per calendar year., • Paid Time Off (PTO): Full-time, regular employees earn 15 days of PTO in the first 12-months of continuous service, and 22 days in subsequent years. Eligible part-time employees earn pro-rated PTO., • Retirement: Effective with your employment start date, you will be eligible to participate in the 401(k) Plan. About Tillster Headquartered in the USA, Tillster is the global leader in digital ordering and customer engagement solutions. For over a decade we have developed revolutionary self-service, ordering and payments solutions – for mobile, tablet, online, kiosk, call center, and more – creating personalized interactions based on consumer preferences, language, and currency. Our platform is compatible with 15+ unique POS systems, representing over 90% coverage in multi-unit restaurants. We offer one platform; one scalable, enterprise class solution – to create world-class digital engagement solutions. Our mission and passion are one in the same: Empower restaurants and consumers to engage and transact anywhere, anytime, and from any device - one consumer at a time, one order at a time, billions of times over. In doing so, together we are transforming e-commerce in restaurants and make the till grow for Tillster and our customers. Thriving at Tillster As a member of Tillster, you will embody our core values: • Put Customers First: Prioritize the needs and satisfaction of our customers in all decisions and actions appropriate to Tillster’s stage of development, resources, and stated goals., • Collaborate: Work together effectively, leveraging diverse perspectives to achieve common goals., • Innovate: Embrace creativity and pursue new ideas to drive progress and improvement., • Operate from Data: Use strong critical thinking skills to make informed decisions based on accurate and relevant data., • Drive Results: Focus on achieving tangible outcomes and delivering high performance., • Own It: Take responsibility for your actions and the success of your work. Follow us on: Tillster.com: Tillster Careers: LinkedIn: Tillster cares about the safety of all our employees—even those we’ve yet to hire RECRUITMENT FRAUD WARNING We want to help you stay safe during your job search. Tillster will never: • Request personal/financial information during recruitment, • Require payment or fees, • Ask for sensitive PII before a formal job offer, • Collect information via email or phone (only through secure channels) Powered by JazzHR fgiUdYfAiQ

Job DescriptionPosition Overview: The Technical Support Engineer will provide Tier 2 support for complex hardware and software issues, collaborate with Tier 1 and Tier 3 teams, and contribute to continuous process improvement. Primary Responsibilities: • Advanced Troubleshooting: Provide Tier 2 support for technical issues related to TruMed’s complex electro-mechanical hardware, refrigeration and control systems, using advanced diagnostic techniques to resolve problems efficiently., • Escalation Handling: Act as the point of escalation for unresolved Tier 1 issues. Analyze cases, develop solutions, and guide customers or Tier 1 associates through the resolution process. Escalate to Tier 3 when necessary., • Customer Interaction: Communicate with customers via phone, email, and chat, providing timely updates and ensuring a positive support experience with empathy and professionalism., • Mentorship: Assist Tier 1 associates by sharing troubleshooting best practices and offering guidance on complex issues. Contribute to the training and development of the Tier 1 team., • System Installations & Upgrades: Support customers with advanced installations, upgrades, and configuration of TruMed’s software and electro-mechanical hardware, ensuring compliance with company standards and customer requirements., • Documentation & Reporting: Accurately document troubleshooting steps, resolutions, and interactions in the customer service management system (e.g., Salesforce). Contribute to the creation of knowledge base articles to streamline future issue resolution., • Proactive Problem Identification: Monitor support trends, identify recurring issues, and collaborate with Tier 3 to drive improvements in processes and product reliability., • Customer Education: Educate customers on product functionality and best practices to ensure optimal use and reduce support needs., • Team Collaboration: Work closely with internal teams and customers, fostering teamwork and maintaining a professional, timely approach to service delivery.Desired Skills:, • Strong hands-on experience with electro-mechanical hardware., • Familiarity with refrigeration systems., • Familiarity with remote desktop software and remote support tools., • Excellent verbal and written communication skills, with the ability to explain technical concepts to non-technical users clearly and concisely., • Strong customer service skills with a professional, friendly, and patient demeanor., • Strong analytical skills and the ability to diagnose and resolve technical issues efficiently., • Ability to think critically and troubleshoot complex problems while maintaining a calm and positive attitude., • Ability to document issues, resolutions, and customer interactions accurately and thoroughly., • Detail-oriented, with excellent time management and multitasking abilities., • Ability to work effectively both independently and as part of a team in a fast-paced, dynamic environment., • Willingness to learn, share knowledge, and contribute to a collaborative team environment.Education:, • Associates degree in Engineering/Sciences or related field with at least 2 years of hands-on experience., • Bachelor’s degree may substitute for the required work experience.Desired Experience:, • Minimum 2 years of experience in technical support or a related customer-facing role, preferably within a technology or healthcare environment., • Proven experience troubleshooting electro-mechanical hardware, refrigeration and control systems, and software., • Experience with customer service tools, ticketing systems (e.g., Zendesk, Jira, ServiceNow), and CRM software (e.g., Salesforce)., • Experience with software installation, configuration, and updates. noBCsex5am

Job DescriptionSummary Our client is a highly sought-after, stable, and prestigiousGeneral Contractor home-based in San Diego, with projects all throughout Southern California. They are currently in immediate need of a Commercial Construction Project Coordinator, who has worked in the construction space in the past. Please take the necessary time to review this job description. If you feel that you possess the necessary skills to satisfy the requirements, then simply apply and you will hear back from one of our team members. This individual must be organized,sociable, energetic and motivated with good oral and written communication skills. Duties & Responsibilities • Distribute project bid requests to subcontractors., • Make phone calls to check the status of subcontractor bids during the bid process., • Manage the subcontractor call list and make notes to quantify accurate bid coverage throughout the bidding process., • Organize bid RFIs from subcontractors for project management., • Manage the collection and organization of subcontractor bids., • Follow up with subcontractors via phone and email to receive bids and answer bid related questions., • Assist in managing subcontractor database., • Manage, monitor and process submittals and RFIs., • Resolve discrepancies by collecting and analyzing information., • Take meeting notes, • Gather quotes from subcontractors and material suppliers., • Maintain plan list and project contact lists, • "Slip sheet plan revisions manually and electronically, • File and document control, • Send, track and receive subcontracts and subcontractor insurance, • Manage electronic project documents to share-file site, • Work with government agencies to pull permits, • Work with subcontractors to assemble billings and obtain the correct paper work, • Prepare close out document packages, • Provide assistance and support for Project Management, • Notary, • Manage Global Directory for Procore, • AIA Subcontract Template Updates, • AIA Owner Template Updates, • Reference to Governing State Retention & Lien Period Limits, • Updating Global Project List, • Project Management:, • Project Directory Maintenance (Assigning Notification and Distr. Groups), • Flag Flow Down Requirements from Owner Contract to Subcontracts, • RFI Posting to Procore (After PM Review), • RFI Log follow up w/ Arch. / Engineer, • Create Submittal Log in Procore, • Request subcontractor submittals from subs., • Submittal Posting to Procore (After PM Review), • Submittal Log follow up w/ Arch. / Engineer, • Plan Overlays to Changes in Updated Plans from Architect, • Sub; Vendor Request for Pricing; Follow Up, • Owner Change Orders: Prepare, Issue, & CollecT, • Prepare drafts of Owner Billings, • Owner Billings: Issue and Track, • Cost Plus Audit Preparation, • Fund Control, • Cost Coding Material Supplier Invoices, • Cost Coding DCI Labor Timecards, • Final Draft Owner Meeting Minutes, • Technical Skills:, • Microsoft Office (Word, Outlook, Excel), pdf software (Bluebeam or Adobe), Procore, Sage, math skills, time management, work under pressure and meet deadlines, work independently and as part of a team.Qualifications & Requirements, • 2-4 years of construction administration experience/knowledge is preferred., • High school graduateEmployment Type: Full time Location: San Diego, CA