Process engineer jobs in Rochester, New YorkCreate job alerts

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job Description Insero Talent Solutions is recruiting a Senior Quality/Industrial Engineer for an electronics manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Responsible for documentation control and with analyzing, designing, and improving processes and systems to enhance efficiency and quality in electronics manufacturing operations. This role will also be responsible for manufacturing support and quality initiatives, including creating and maintaining product and component data within the SAP System, and change control for both production and R&D. SPECIFIC RESPONSIBILITIES: Responsible for site management of SAP master data such as the generation of part numbers, BOMs, and routings. • Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release for manufacturing., • Lead quality assurance initiatives to ensure compliance with industry standards and regulations., • Develop and maintain documentation of processes, standard operating procedures (SOPs), engineering/manufacturing changes and training materials in accordance with ISO 9001:2015 and industry standards., • Review and coordinate with Engineering, Sales, and Safety Agencies on product manuals and labeling, • Bachelor’s degree in Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field., • Relevant certifications (e.g., Six Sigma, ASQ Certified Quality Engineer) would be beneficial., • Strong knowledge of general manufacturing, quality control, and lean principles., • Skilled in MS Word and Excel; experience with SAP preferred., • Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions., • Effective written and verbal communication.

Job Description The Sr. Water/Wastewater Engineer will work on water and wastewater treatment as well as distribution and collection of related projects. This individual will provide leadership and work closely with the water/wastewater design team and other discipline team members. The chosen candidate will be responsible for oversight of all technical aspects of a project, as well as administrative and management duties. The Engineer will be involved in business development activities such as responding to proposals and client outreach. Duties • Provide daily oversight and guidance to water/wastewater team, • Provide weekly scheduling of time for team members as well as review of weekly time sheets, • Prepare scopes of work, budget and monitor budgets throughout the entire project, • Seek out and pursue business development opportunities to further expand the group in targeted geographical regions of New York, • Establish relationships and teaming opportunities with W/MBE companies for given projects, • Provide assistance on developing design concepts and potential alternatives, • Provide QA/QC to produce effective and high-quality project documents (including reports, design drawings, and specifications), • Assist clients with construction procurement, • Support projects in construction, including office administration and field observation oversight, • Assist with water and wastewater operations and research, hydraulic/process modeling, environmental review, permitting, and project financing, • Become actively involved with local, state or national professional associations Salary Range: $100,000 - $130,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • Minimum of 10 years’ experience, • Professional Engineer license in New York State, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Project management and leadership experience on various sized projects, • Effective communication skills using oral, graphic and written forms, • Ability to travel to project sites and meet with operators to discuss technical matters, • Ability to manage multiple workloads and budgets Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit . Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job Description We are currently hiring a mid-level Mechanical Engineer in our Building Engineering Division – Energy Infrastructure team in our Rochester, NY office. LaBella’s Energy Infrastructure team provides comprehensive energy efficiency and renewable energy consultancy, including feasibility analyses, and design of mechanical systems. Our engineers are well-versed in all aspects of building and energy systems design relating to a variety of new construction, renovations, and design/build projects for a variety of clientele. The Mechanical Engineer will work with our engineers in a lead role on a variety of decarbonization/electrification projects to develop projects in feasibility stages all the way through design and construction. A successful candidate will be able to work well in a team, mentor junior engineers, and communicate effectively with clients. Duties • Lead design of building HVAC systems and district energy systems, • Field investigations to document existing conditions, • Selection and calculations for design purposes, • Work with Jr Engineers to develop and review project drawings and documentation, • Interact directly with clients by completing analysis of design options, cost benefit comparisons, and communicating results to assist in decision making process., • 8-10 years of relevant experience, • Bachelor’s degree in Mechanical Engineering is preferred, • Well-rounded experience in HVAC and hydronic system design, • Preferred: experience designing geothermal or district energy systems, • Experience with Revit or AutoCAD, • New York State Professional Engineer’s license is a plus, • Excellent verbal and written communication skills Salary Range: $80,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Title Operator Inspector - Weekend Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The successful candidate for this position will be proficient at material handling of small optical components, hand-cleaning and loading them into coating-dedicated tools or fixtures. Ability to inspect for cosmetic defects is another important attribute of this position. You Will: • Support Technicians in cleaning and/or loading various sizes of optical lenses into custom fixtures in preparation for coating., • Support Technicians in quickly and safely unloading finished lenses, traying and packaging for inspection or shipment., • Inspect lenses when required per RPO’s cosmetic quality standards and customer specifications., • Support Sonic room operator by preparing lenses and other optical components for Sonic cleaning or parts washing as well as assisting in tray cleaning., • Support peers in general housekeeping practices, cleanliness, organization, and safety., • Take daily direction from the Manufacturing Manager and Sr. Manufacturing engineer of Coating, • Work with fellow employees to notify them of quality issues and address them, • Record labor and production output accurately into the RPO MES system, Epicor, • Maintain a neat and safe work environment, • Load or “flip” coating chambers after the coating run is complete., • Ability to communicate effectively to team members and management., • High school diploma or GED, • Ability to apply basic mathematical concepts., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles, • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Friday - Sunday, 5am - 5:30pm *15% Differential pay offered for Weekend shift Training will take place on A shift before transitioning to a Weekend shift Schedule: Monday - Friday 6am - 2:30pm

Job DescriptionSalary: $68K-$80K Were looking for an Enterprise Solutions Engineer to join our growing team in West Henrietta, NY! This is a hybrid opportunity. Who we are: Safran Electronics & Defense is an international company with 10,000 employees, built on proven expertise in technologies that underpin sovereignty. By combining human and artificial intelligence, we develop the products and services that empower aerospace and defense players to observe, decide and guide, all over the world. Safran Electronics & Defense also supports fellow Safran companies by sharing its state-of-the-art electronics skills and expertise. Within Safran Electronics & Defense, our Timing & Synchronization division is the leader in R-PNT (Resilient Positioning, Navigation & Timing) solutions. We supply military and commercial industries worldwide with accurate timing technologies and equipment (Time Servers, Inertial Navigation System), as well as ultra-precise timing and frequency distribution for applications requiring a high degree of reliability and accuracy across IP time distribution standards. In this way, we contribute to the performance of critical operations support. Whenever accuracy, safety, security and reliability are critical, the solutions of Safran Electronics & Defense leads the way. The Position: The Enterprise Solutions Engineer plays a pivotal role in designing, delivering, and supporting innovative business solutions across the organization. This position blends technical expertise with strategic collaboration to solve complex business challenges using modern technologies. The Day to Day: • Solution Design & Delivery, • Collaborate with internal stakeholders to define business challenges, uncover root causes, and document functional and technical requirements., • Design and implement end-to-end business solutions from proof-of-concept to production using a mix of enterprise systems, cloud tools, and custom applications, • Serve as the primary owner of the solution lifecycle: development, testing, user acceptance, deployment, support, and documentation, • Technology Enablement, • Leverage the Microsoft Power Platform (Power Apps, Power Automate, Power BI, Dataverse) to build low-code/no-code solutions., • Explore and implement emerging technologies, including AI, machine learning, and automation frameworks, to drive business process improvements., • Integrate disparate enterprise systems through APIs, middleware, or ETL tools as needed., • Data Management & Visualization, • Perform data analysis to support solution design and business decision-making., • Create dashboards, visualizations, and reports that enable self-service insights and operational transparency., • Customer Engagement & Collaboration, • Act as a trusted partner and technical advisor to internal business units., • Facilitate user training, documentation, and change management to ensure successful solution adoption., • Provide post-deployment support, incident resolution, and enhancements. What you Bring to Safran: • Bachelor's degree in Information Systems, Computer Science, Engineering, or related field; equivalent experience considered., • 3+ years of experience in a technical solution delivery role (e.g., Systems Engineer, Business Systems Analyst, Applications Developer)., • Proven experience with Microsoft Power Platform (Power Apps, Power Automate, Power BI)., • Strong analytical and problem-solving skills with attention to detail., • Working knowledge of databases (SQL Server, PostgreSQL, etc.) and API integration., • Experience with UAT coordination, deployment strategies, and user documentation., • Excellent communication and interpersonal skills; ability to translate technical concepts to non-technical stakeholders. Preferred Qualifications: • Experience implementing AI solutions (e.g., Azure AI, OpenAI, Copilot)., • Familiarity with enterprise business systems (ERP, CRM, HRIS, etc.)., • Experience in process mapping, Lean/Six Sigma, or continuous improvement methodologies., • Background in Agile or DevOps environments. Visit ourwebsitefor more information or check out our videos onYouTube At Safran Electronics & Defense, youll combine passion for your job with a quality work environment adapted to a good life balance. Benefit from a variety of opportunities to shape the career path that suits you: our leaders and technical experts are there to support you from your integration and career development, in France and abroad. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description Title Operator Inspector - Weekend Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The successful candidate for this position will be proficient at material handling of small optical components, hand-cleaning and loading them into coating-dedicated tools or fixtures. Ability to inspect for cosmetic defects is another important attribute of this position. You Will: • Support Technicians in cleaning and/or loading various sizes of optical lenses into custom fixtures in preparation for coating., • Support Technicians in quickly and safely unloading finished lenses, traying and packaging for inspection or shipment., • Inspect lenses when required per RPO’s cosmetic quality standards and customer specifications., • Support Sonic room operator by preparing lenses and other optical components for Sonic cleaning or parts washing as well as assisting in tray cleaning., • Support peers in general housekeeping practices, cleanliness, organization, and safety., • Take daily direction from the Manufacturing Manager and Sr. Manufacturing engineer of Coating, • Work with fellow employees to notify them of quality issues and address them, • Record labor and production output accurately into the RPO MES system, Epicor, • Maintain a neat and safe work environment, • Load or “flip” coating chambers after the coating run is complete., • Ability to communicate effectively to team members and management., • High school diploma or GED, • Ability to apply basic mathematical concepts., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles, • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Weekend Shift Schedule: Friday - Sunday, 5:00am - 5:30pm. Pay differential for Weekend shift schedule

Job DescriptionDescription: Position Summary The Manufacturing Engineer is responsible for developing, optimizing, and sustaining manufacturing processes to support efficient, high-quality production. This role involves analyzing products and production methods to improve both new and existing operations. Working collaboratively within a cross-functional team environment, the Manufacturing Engineer applies technical expertise to drive continuous improvements that reduce cycle times, enhance product quality, and deliver measurable cost savings. Duties and Responsibilities • Design and implement robust manufacturing processes to ensure product stability, establish production standards, and support ongoing process improvements., • Optimize and innovate manufacturing methods, equipment operations, and overall production performance to enhance efficiency and reduce waste., • Collaborate cross-functionally with engineering, production, and other departments to troubleshoot issues and resolve production challenges., • Research, recommend, and integrate new technologies and systems to upgrade manufacturing capabilities and drive innovation., • Prepare accurate and timely quotes in response to customer deadlines, ensuring feasibility and alignment with production capabilities., • Design and develop end-to-end manufacturing solutions including processes, tooling and fixtures, CNC programs, and detailed work instructions. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in Engineering preferred., • Prior experience as a Manufacturing Engineer or in a similar role is strongly preferred., • Proficient in CAD/CAM software, including SolidWorks, Mastercam, and PartMaker., • Knowledge of CNC manufacturing equipment and quality assurance methodologies., • Skilled in Microsoft Office Suite and experienced with ERP systems., • Strong project management, problem-solving, and multitasking capabilities., • Demonstrated commitment to maintaining health and safety standards., • Able to work both independently and collaboratively within a team environment. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000 - $85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR FRVKwUedJI

Job Description Title Mechanical Engineer Department Manufacturing Engineering Reports to Director of Production Engineering SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: We are looking for a talented Mechanical Engineer to lead the mechanical design, production fixturing, and modeling efforts that support both current and next-generation precision optics products across defense and commercial sectors. This role plays a critical part in developing CAD models and detailed drawings for optical and mechanical components, driving manufacturing excellence through innovative tooling and process optimization. The ideal candidate will bring a strong understanding of optics manufacturing practices, engineering standards such as ISO 9001 and ASME Y14.5, and the ability to create and manage complex Bills of Materials (BOMs). Daily responsibilities include reviewing technical drawings, integrating designs into our ERP system, and collaborating closely with cross-functional teams to ensure seamless execution from concept to production. This is a high-impact opportunity to shape the future of precision optics through engineering innovation and operational precision You will: • Develop high-precision CAD models and detailed engineering drawings of optical and mechanical systems using SolidWorks., • Apply expert-level understanding of GD&T principles to ensure dimensional accuracy and manufacturability., • Design and assemble production fixtures, custom tools, and specialized equipment to support advanced manufacturing processes., • Communicate engineering results effectively to both technical teams and non-technical stakeholders, including senior management., • Operate independently with minimal supervision, demonstrating initiative and adherence to established procedures., • Leverage hands-on experience in tool design and fabrication techniques to drive innovation and efficiency., • Manage project budgets, create detailed plans, and oversee timelines to ensure successful delivery of engineering solutions. You Have: • Associate degree in Mechanical Engineering required; bachelor’s degree in mechanical engineering or a related field strongly preferred., • Minimum of 5 years’ experience of hands-on mechanical engineering experience in a high-precision manufacturing environment, ideally within optics or advanced tooling., • Demonstrated expertise in CAD software (SolidWorks preferred), with a portfolio of high-quality models and production-ready drawings., • Proven ability to read, interpret, and analyze complex technical documents, engineering drawings, and specifications with precision and clarity., • Proficiency in applying advanced mathematical and engineering principles to solve real-world manufacturing challenges., • Strong communication skills, with the ability to present technical concepts effectively to cross-functional teams and non-technical stakeholders., • Experience working within ERP systems and managing engineering documentation and BOMs., • Self-motivated and capable of working independently while adhering to established procedures and quality standards. You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous vacation and sick-time. Work Requirements & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday 7am - 3:30pm

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: COE SUMMARY: Provide engineering duties as assigned by Plant Engineer and/or Plant Manager. Responsible for overseeing new equipment installations as well as modifications to existing equipment as assigned by Plant Engineer. Maintain PLC, HMI, and Drive programming software. Provide detail drawings of parts that need to be manufactured in our shop or by an outside machine shop. Oversee plant engineering duties in the Plant Engineer’s absence. Troubleshoot and repair equipment problems that effect productivity of the manufacturing group. Be involved with process improvements providing input in production problem solving. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: • Providing detail drawings., • Active in troubleshooting electrical, electronic, and mechanical problems in a manufacturing environment., • Well versed in PLC and HMI programming., • Well versed in digital and analog AC/DC drive design, programming and installation., • Well versed in computer (PC) fundamentals, including communication protocols, Microsoft Operating systems and Microsoft Office software., • Manage new equipment installations and startups., • Design, install and startup equipment modifications., • Negotiate price and purchase equipment and services as needed., • Draft capital expenditure requisitions - gather information for justification of capital, obtain cost of capital items., • Fill out project item listings., • Provide managerial input to the maintenance department as well as outside contractors., • A fundamental understanding of regulations including OSHA, NFPA, NEC, EPA, and WDNR., • Responsible for working safely and being a safety leader. Directly supervises employees in the Maintenance Department in the absence of the Maintenance Manager. Carries out supervisory responsibilities as necessary in accordance with the organization's policies and applicable laws. Responsibilities include training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and EXPERIENCE: A bachelor's degree, Associate's degree, or equivalent in a related field is required. An additional year of relevant full-time experience and/or training is preferred. LANGUAGE SKILLS: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS: Ability to work with mathematical concepts such as Ohm’s Law, probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to sit and talk or hear. The employee is occasionally required to stand; walk; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and taste or smell. The employee must occasionally lift and/or move more than 100 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk of electrical shock; risk of radiation; and vibration. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job Description Job purpose Individual will be responsible for producing, modifying and repairing tools used in the manufacturing process. Must have 10+ years of experience reading prints and using mills, lathe, surface grinders and other standard tool room machines to make parts to print. Must have good attention to detail and accustom to working and measuring to close tolerance and delicate parts. Responsible for maintaining work quality and doing in process inspection. Essential Duties • Assembling, fitting and repairing tools, • Following engineering drawings, including interpreting GD&T, • Using 2D and 3D computer aided design and manufacturing software (CAD/CAM), • Assisting with tool maintenance, • Teach basic machine operation to floor operators as required, • Give experienced input to tooling designs for better manufacturability, • Complete production operations requiring tool room machines, • Other tasks not listed here that arise from an ever-growing environment, • Other duties as assigned Key Responsibilities Responsibilities Measurement Make tools to engineer parts Parts measured to print Assemble and debug prototype tools Tools made for production put to use Readily assist production and engineer as required Tasks completed in a timely manor Minimum Qualifications • Education: High school diploma or GED/Technical Training Certificate/Equivalent experience., • Work experience: Journeyman Tool & Die Maker or equivalent with 5+ years of experience., • Ability to read engineering prints with high understanding of GD& T, • High competency using micrometers, indicators, calipers, etc., • Requires intermittent long periods of standing and/or walking, • Periodic lifting of materials not to exceed 40 pounds, • Willing to work beyond normal hours if needed, • Subject to stressful situations, • An understanding of both Metric and English measuring systems, • Ability to write and edit programs with understanding of cutting parameters, • Ability to use Manual Knee Mill, Manual Lathe, Grinder, Machine Tools, Inspection and measuring instruments such as micrometers, calipers, and indicators and power hand tools Physical Demands and Work Environment • Standard work week is Monday through Friday, hours to be consistent with business unit; some off hours work expected, • Generally working in Office with some activities in production environment., • Repetitive motion, • Some day or overnight travel domestically could be required.

Job Description Title Operator Inspector - C Shift Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join to RPO team! Job Summary: The successful candidate for this position will be proficient at material handling of small optical components, hand-cleaning and loading them into coating-dedicated tools or fixtures. Ability to inspect for cosmetic defects is another important attribute of this position. You Will: • Support Technicians in cleaning and/or loading various sizes of optical lenses into custom fixtures in preparation for coating., • Support Technicians in quickly and safely unloading finished lenses, traying and packaging for inspection or shipment., • Inspect lenses when required per RPO’s cosmetic quality standards and customer specifications., • Support Sonic room operator by preparing lenses and other optical components for Sonic cleaning or parts washing as well as assisting in tray cleaning., • Support peers in general housekeeping practices, cleanliness, organization, and safety., • Take daily direction from the Manufacturing Manager and Sr. Manufacturing engineer of Coating, • Work with fellow employees to notify them of quality issues and address them, • Record labor and production output accurately into the RPO MES system, Epicor, • Maintain a neat and safe work environment, • Load or “flip” coating chambers after the coating run is complete., • Ability to communicate effectively to team members and management., • High school diploma or GED, • Ability to apply basic mathematical concepts., • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • Balance: 11 paid holidays, generous paid vacation and sick time, • While performing the duties of this job, the employee is regularly required to stand: use hands to fingers, handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch: and talk and hear., • The job may involve prolong periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. May involve prolonged periods of magnified inspection (eye strain)., • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required and May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles, • May work at different workstations as production needs require, or shifts from one station to another, during the production process. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday- Friday, C Shift. 10:00pm-6:30am *10% Differential pay offered for C shift Training will take place on A shift before transitioning to a C shift Schedule: Monday - Friday 6am - 2:30pm

Job Description Akkodis is recruiting for a Controls Engineer in Rochester, NY. As a Controls Engineer, you will be responsible for the design, development, and implementation of electromechanical hardware and software solutions. Expertise in PLC programming, schematic design, electrical testing, and troubleshooting is required. The salary for this Controls Engineer is from 90K to 100K. The rate may be negotiable based on experience, education, geographic location, and other factors. Key Responsibilities for the Controls Engineer include: * Create and review electrical schematics, wiring diagrams, and other technical documentation. * Develop and maintain PLC software for various applications, including automation, process control, and robotics. * Assist in creating specifications, critical parameters and statement of work. * Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development. * Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability. * Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment. * Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies. Participate in all phases of the product lifecycle, from concept and design to manufacturing, testing, and installation. Requirements for the Controls Engineer include: Bachelor's degree in Electrical Engineering or a related field. * 3 years of experience in electromechanical hardware and software design and development. * Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell). * Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN). * Experience with electrical testing equipment and procedures. * Excellent analytical, problem-solving, and troubleshooting skills. * Strong communication, interpersonal, and teamwork skills. * Ability to work independently and as part of a team. * Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing). * Knowledge of C programming * Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. If you are interested in this Controls Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Mike Keegan at 585-465-1236 or mailto:"> Benefit offerings available for our associates include medical, dental, vision, and a 401K plan. Pay Details: $90,000.00 to $100,000.00 per year Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job DescriptionPEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Sheet Metal Process Engineer Reports to: Fabrication Director Your Role: The Sheet Metal Process Engineer is responsible for shepherding products through the production process, while ensuring customer delivery and quality requirements are satisfied. This high impact role requires innovative thinking, a high sense of urgency and collaborating in a cross-functional environment. Responsibilities Include: • Develop and validate manufacturing processes for new products, including tooling, fixtures, and assembly methods., • Participate in design reviews to ensure manufacturability and cost-effectiveness., • Interpret and clarify engineering drawings, BOMs, and specifications for internal teams and external suppliers., • Serve as the primary point of contact for technical questions related to the TDP., • Ensure documentation is complete, accurate, and production-ready., • Define and optimize processes., • Support root cause analysis and corrective actions for production issues., • Implement lean manufacturing principles and continuous improvement initiatives., • Work closely with procurement, quality, and supplier engineering teams to ensure alignment on technical requirements., • Collaborate with design and R&D teams to ensure manufacturability of new products., • 5+ years hands-on experience of bending, forming, welding and finishing processes., • .AS/BS in relevant technical field., • Strong understanding of NPI processes and design-for-manufacturing (DFM) principles., • Familiarity with ERP and PLM systems., • Experience working with suppliers and contract manufacturers., • Proficiency in CAD software (e.g., SolidWorks) and manufacturing systems (e.g., PDM, Autodesk Vault, SW Composer)., • Knowledgeable in programming., • Proficiency in interpreting engineering drawings, GD&T, and BOMs., • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision ProductsA reasonable estimate of the compensation range for this position is $60,000.00 - $90,000.00 per year. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR UUQJBe6ntM

Job Description Insero Talent Solutions is recruiting a Senior Magnetics Design Engineer for a manufacturing company in Rochester, NY. Job Summary: A leading designer and manufacturer of high- reliability passive components and precision subsystems is seeking an experienced Senior Magnetics Design Engineer to join our Magnetics Design Center Team. In this role, you will develop electrical designs and mechanical configurations for custom transformers, inductors, filters, and other magnetic components. Your responsibilities will include contributing to the design and specification of custom tooling, assembly fixtures, inspection fixtures, BOMs, and process instructions. As a Senior Magnetics Design Engineer, you will leverage your expertise to enhance the company's competitive edge in quotations, new product developments, and successful production, while also engaging in the trial and verification of new technologies. Responsibilities: • Translate customer magnetics requirements into success criteria and specifications for components and processes., • Develop and leverage computer aided modeling and simulation methods for design trade-off analyses, including finite element analyses., • Communicate effectively with customers, suppliers, and team members to support collaborative new product development., • Analyze experimental results from designs of models and prototypes to recommend improvements and cost reduction strategies., • Monitor external technology developments related to power electronics and magnetics design tools and advise management on opportunities and risks., • Participate in daily team huddles to review project statuses and collaborate on overcoming, • Develop milestone plans and deadlines for project completion, ensuring accountability and timely updates on progress., • Establish initial concepts of magnetics solutions in quotations and prototypes, with related manufacturing processes including provision for custom tooling and new special machines, while working with suppliers to create cost-effective designs., • Propose improvements during production to reduce labor time and enhance safety and process, • Develop control plans and test circuits for new magnetics products including custom electrical testing involving sinusoidal, resonant, and non-sinusoidal methods to simulate waveforms and amplitudes of application in measuring dissipation, partial discharge or other selected parameters., • Participate in problem solving sessions involving DFMEA, PFMEA, HALT and PPAP (including MSA & PCP for target factories)., • Support assigned projects, guiding design reviews from prototype through First Article to production, including lifecycle product change control. Collaborate with the Design Center Tiger Team to understand and enhance manufacturing processes for magnetic components, addressing any roadblocks., • Provide technical support to factories by resolving production issues related to manufacturing processes, materials, and inspection., • Attend weekly training sessions on configuration control, drawing requirements, supplier management, and related engineering processes. Qualifications: • BS degree in Electrical Engineering., • 5-10 years of experience in designing custom passive magnetic components for demanding power electronics applications and a demonstrated record of successful results., • Passion for continued professional development in magnetics design methods, materials and, • Proficient in Ansys, Comsol, SolidWorks, and electrical circuit simulation tools (e.g., PSPICE,, • Matlab-Simulink)., • Strong organizational and communication skills to collaborate effectively with global colleagues and suppliers., • Ability to coordinate multiple projects and manage time and resources efficiently., • Must meet eligibility requirements for access to export-controlled data.

Job DescriptionDescription: Addison Precision Manufacturing is a world-class contract manufacturer of precision-machined components. Our focus reflects a commitment to machining excellence, and we strive to deploy the latest technologies to meet the highest standards of any industry requiring precision machined components, including customers in the aerospace, aircraft, medical and precision manufacturing industries. In 2019 we built a brand new, air conditioned, state of the art, manufacturing facility. We are looking to build our team here. Addison Precision Manufacturing is looking for Process Engineer who will develop and maintain processes in a lean manufacturing setting. The Process Engineer works with both the customer and fellow departments to develop and improve the manufacturing process by studying product and manufacturing methods. Process Engineers have the ability to contribute their knowledge and ideas to improve upon current processes, resulting in reduced cycle times, improved quality of product and increased cost savings. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insuranceRequirements: Duties & Responsibilities: • Support manufacturing in productivity and quality improvements, • Assure product and process quality by designing testing methods, establishing standards., • Develop and maintain manufacturing process flows., • Collaborate with Engineers, Contractors and Suppliers, • Optimize processing capabilities through use of continuous improvement principles, • Assist in the development (design and machine) new/existing features., • Support Root Cause Analysis and Corrective Action determination, • Bachelor's or Master's degree in Engineering preferred or equivalent experience., • Previous experience as a process engineer or similar role preferred., • Familiarity with manufacturing equipment and quality assurance techniques., • Project management skills, • Problem solving ability, • Strong GD&T knowledge, • Continuous commitment to health and safety standards., • Contribute to a team effort as well as being able to work independently.

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job DescriptionDescription: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952. Benefits: • Competitive salary and benefits package, • Generous sign on bonus., • Opportunity to work with a team of talented professionals, • Challenging and rewarding work environment, • Generous Paid Time Off, • Several health insurance plan options with a generous employer contribution to the premium, • Long term disability fully paid for by the company, • Enhanced short term disability fully paid for by the company, • Life insurance fully paid for by the company, • Employee Assistance program, • Dental and vision insurance, • 401k plan with company match, • HRA and HSA options for pre-tax savings with an employer funded HRA benefit, • Pet insurance enrollment option Position Summary The Project Manager position will be responsible for management of high profile and complex projects from start to finish. This role will also work with employees on the shop floor to improve efficiency, safety, and quality of manufacturing processes. Duties and Responsibilities · Responsible for driving total project management solutions from quote through to shipment · Plans and designs tools, fixturing, and other mechanically functioning equipment · Develops plans and implements new machining processes. · Spearheads process optimization in both engineering and manufacturing. (automation) · Provide technical support to sales team and support customer interface accordingly · Complete detailed cost models needed to support providing quotes to customers · Comprehends and disseminates customer driven specifications called out on drawings and determine how to process the parts in accordance with the specifications required. · Works with QC to ensure all QMS requirements are being met during job routing. · Understands ISO 9001 workflow requirements and follow such procedures. · Builds B.O.M. on job routers to conform with customer material requirements called out on the print, parts list, and or contract. · Reviews customer supplied purchase orders and contracts to ensure we meet all order requirements and build notations in the work instructions. · Orders specialty material, hardware, and finishing supplies pertaining to the job or project assigned. · Works with QC to review material certifications from vendors and sign off that they meet the called-out requirements from the contract. · Effectively communicates any issues encountered while working on assigned projects back to supervisor and the customer as needed in a professional and timely manner. · Leads post and pre-production reviews on defense projects during first run or after encountering issues. · Creates measurable KPI’s that will quantify success on critical to plant growth projects. · Provides support as Engineering Manager back up. · Interprets customer supplied drawings and determine the best method of manufacturing considering the equipment available and the current manufacturing schedule. · Writes work instructions in detail pertaining to any one of the fabrication processes. · Utilizes 3D CAD software to help shop floor employees better understand the manufacturing process of various parts. · 3D model customer parts using their supplied drawings utilizing CAD software. · Program machines. (laser, turret) · Supports the shop floor in any fixture design / work holding suggestions and optimize quality outcome. · Utilizes Mastercam, SolidWorks, Radan, Epicor, or similar software when required, to communicate effectively to the shop floor. · Maintains revision control of manufactured parts using our ERP system. · Other duties as assigned. Requirements: Position Qualifications · Bachelors degree in Engineering or related discipline is a plus · 10 plus years of experience in hands on machining (mills and lathes) · 3+ years of experience in Project Management. Knowledge, Skills, and Abilities · Strong communication skills, both written and verbal · Excellent problem-solving skills · Attention to detail and accuracy. · Proficient in Microsoft Office. · Ability to work independently and as part of a team. · Flexibility and adaptability to changing priorities and deadlines. · Confident decision-making ability · Capable of participating in cross-functional settings and working with support functions, manufacturing, quality engineer, and facilities. · Support cost reduction & continual improvement activities. · Analyze raw data and generate usable reports. · Knowledge of print reading and understanding of common GD&T practices. · Knowledge of materials and their chemical and physical properties.

Job Description PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Quality Engineer Your Role: Under the direction of the Quality Director, you will assist in elevating and systematizing engineering and manufacturing processes. Daily activities will require you to proactively identify potential issues to mitigate risk, improve product quality, manage industry and regulatory compliance and assist in delivering corporate strategic initiatives. Responsibilities Include: • Analyzes quality performance data and metrics to identify and drive improvement opportunities. Actively promote and participate in a cross-functional teamwork environment. * Facilitate and promote the use of appropriate problem-solving techniques for effective root cause analysis and successful corrective action for customer complaints and internal nonconformances. * Understand and promote overall compliance with AS9100/ISO9001 and 13485 specifications as they relate to product conformance and contractual requirements. * Understanding of inspection methodologies used to determine compliance for machined and assembled products. * Manage, conduct, and support internal and external audits, publishing findings and recommendations. * Lead in the implementation of assurances, process controls, and corrective and preventative actions (CAPA) related systems designed to meet or exceed internal and external requirements. * Drives continuous improvement and prevention of future failures by helping facilitate the implementation of corrective action. * May be accountable for projects/ programs and developing methods and parameters, project methodology, and/ or project proposals. * Demonstrate a productive work ethic and commitment to quality that sets the standard for PEKO Standards. Basic Qualifications: * Associate degree in Engineering or equivalent. * 2+ years of quality control experience in a manufacturing environment * 4+ years of experience utilization of Quality Management Systems (QMS) * 4+ years of creating and/or managing Design History Files (DHF) and Device Master Records (DMR). * Knowledge of ISO 13485 and AS9100; ability to establish quality protocols and procedures that align with requirements. Preferred Qualifications: * Bachelor’s degree in engineering or equivalent * Strong communication, negotiation, team moderation skills, and ability to manage time and workload constraints. * Good understanding of QA methodologies, tools, and processes. * Knowledge in the application of quality methods and problem-solving tools (TQM, Six Sigma, 8D, 5-Why, Lean Manufacturing, or other continuous improvement methodologies). Work Authorization: US Persons PEKO Perks: * Competitive Compensation * Tuition Reimbursement (IRS Allowable pre-tax Max) * 401K, Medical, Dental, Vision * Flexible Spending & Health Savings Accounts * Life, Short and Long-Term Disability * Recognition Awards & Discretionary Benefits Our Core Values: * We care about our talented and loyal PEKO family. * We are committed to providing a safe, clean, and positive workplace. * We believe in transparency, honesty, and respect for all stakeholders. * We are dedicated to maintaining an agile and financially prudent organization. * We foster the belief that PEKO people are resilient problem-solvers impacting the future. * Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: * This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice A reasonable estimate of the compensation range for this position is $60,000 - $89,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements.. Powered by JazzHR 0pm10NwpBM

Job Description Position Summary: The Field Service Engineer plays a key role in ensuring the successful delivery and performance of JCS systems at customer sites. This position provides hands-on support to both our internal project teams and our customers by leading the startup, commissioning, and troubleshooting of JCS process equipment. To succeed in this role, the engineer must combine strong technical knowledge of process applications with a practical understanding of system functionality, ensuring that equipment is installed, optimized, and performing to JCS’s high standards. The role also requires clear communication, problem-solving skills, and the ability to partner effectively with customers and colleagues in dynamic environments. Responsibilities: • Establish and maintain a continuous positive relationship with customers, including support and follow-up on customers' concerns and problems, • Perform troubleshooting and fault-finding services on site, online, and by phone, • Perform and execute Factory Acceptance Testing, • Perform site management, process engineering, mechanical engineering, controls and automation engineering for start-up and commissioning of JCS engineered systems, • Execute site acceptance testing – partner with customer, manage and/or support startup team for this function, • Document and maintain written records of services performed on behalf of JCS, • Take an active role in project support in the following areas:, • Project site management, installation, start-up and commissioning support, • Building electrical panels, checkout and testing assistance, • Process systems installation, calibration, testing and checkout, • Control systems Installation, calibration, testing and checkout, • Minimum 3 years experience in service-related functions, in Food and Beverage or related industry, • Strong working knowledge of software (preferably with PLC programming) and hardware applications, including instrumentation testing and calibration equipment., • Knowledge and hands-on experience with the repair and service of process-related machines and products., • Prior technical, mechanical, and electrical training. Must be able to read and work with electrical schematics, piping and instrumentation diagrams (P&IDs) and other related drawings., • A valid driver’s license and related documents to travel by car or air within the US and Canada, • Ability to work irregular hours, including overnight, with travel up to 75% of the time. Travel may consist of 1 day to multiple weeks at a given time., • Sit, climb, stand, bend, kneel, walk, squat, bend, reach and work in hot or cold temperatures., • Light physical effort with frequent lifting or moving of lightweight materials up to 40 lbs., • Ability to see and handle small parts and wires of different colors. What's in it for you: Working at JCS is like working with family. We offer competitive pay with a full array of benefits, including: • Nine paid holidays, • Paid time off (PTO), • Health and dental insurance with a generous premium contribution by JCS, • Short-term and long-term disability insurance, paid by the company, • Group life Insurance, paid by the company, • A 401(k) Retirement Savings Plan, currently with a matching contribution

Job DescriptionDescription: Shape the future of infrastructure through innovative highway and bridge engineering Are you an experienced Transportation Project Manager ready to lead high-impact civil engineering and transportation infrastructure projects? Fisher Associates seeks a motivated professional to manage and deliver innovative highway and bridge design solutions. Whether you’re a licensed Professional Engineer (PE) or an EIT nearing licensure, this is your opportunity to advance your leadership career and drive critical infrastructure projects that improve mobility and safety. At Fisher Associates, we support your growth, leadership, and innovation—your success is our priority. Ready to advance your career and shape the future of infrastructure? Apply now to join Fisher Associates! About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Proactively pursue new business with existing and prospective clients by delivering exceptional service, promoting Fisher’s capabilities, and building lasting relationships., • Successfully lead mid-to-large-scale transportation projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to ensure successful and timely project delivery., • Lead design strategy and collaborate with teams, clients, partners, and stakeholders to align with client goals and ensure seamless project delivery., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Provide clear direction, motivation, and mentorship to team members., • Prepare winning project proposals and serve as primary client contact throughout the process., • Successfully navigate and implement complex public processes and municipal approvals., • Represent Fisher Associate’s in professional organizations, business boards, and community activities. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Senior Transportation Project Manager • B.S. degree in Civil Engineering (Master’s preferred), • 10+ years in civil transportation engineering, including project management of DOT-funded highway and bridge projects, • Professional Engineering License (PE) preferred or ability to obtain it, • Proven client relationship and business development skills in transportation sector, • Proficiency in MS Office; MicroStation preferred, • Familiarity with NYDOT or PennDOT design standards preferred, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Foster trust and collaboration through integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Senior Quality Engineer who will lead and facilitate the implementation of quality initiatives and their continual improvement. Responsibilities include lead, coach, and facilitate problem solving, analysis of data and continual improvement activities. Review and understand customer prints and specifications. Ensure the quality of the parts produced meets all expectations. Quickly and effectively take action when external or internal non-conformances are found. Key Responsibilities: • Follows all safety processes and procedures in accordance with the job and Company policy., • Be the Quality liaison between the customer and site manufacturing process for understanding quality requirements and working through quality issues., • Facilitate and promote use of appropriate problem-solving techniques (8D, 5-Why) for effective root cause analysis and successful corrective action. Interfaces with engineering and manufacturing to ascertain and implement corrective actions., • Provide technical support to operations ensuring consistent adherence to quality requirements., • Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness., • Participate in the Advanced Product Quality Planning activities (NORP) to determine appropriate use of existing and new measurement systems during new tool or process design and startup., • Participate in the PT lot process to ensure that all quality checks as outlined in the MPCD (operation work instructions) are in place and will ensure that customer requirements will be achieved., • Coordinate, develop, and submit PPAP documents (including Control Plan, FMEA, Process Flow Diagram) for new product launches to meet customer requirements., • Generate efforts to achieve and surpass the companys quality key metrics through the execution of QMS processes and by proposing new or modified approaches., • Understand and promote overall compliance with ISO 9001 specifications., • Manage priorities for inspection workload and support inspectors with the means to complete inspection tasks., • Interpret and explain GD&T callouts on customer prints for inspectors to follow., • Maintain performance evaluations of associates with evidence of their embodiment of the companys core values and data on their achievement towards S.M.A.R.T. goals., • Demonstrate a productive work ethic and commitment to quality that sets the standard for the Quality Engineer role., • Assist with other duties as assigned by Manager. Supervisory Responsibilities:, • Bachelors degree (B.A.) in engineering or technical field or equivalent combination of education and experience., • 7+ years related experience or training 2+ years experience with supervising., • To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Microsoft PowerPoint.Other Requirements:, • Knowledge and experience in metal fabrication, stamping and forming. Ability to use standard manufacturing measurement tools and equipment. SPC, GD&T, DOE, Gage R&R, statistical analysis. Basic understanding of mechanical processes, materials and machinery. Strong problem solving skills. Ability to travel (15%) to customers and suppliers. ASQ certification a plus. PC-DMIS experience a plus., • Language Skills: Very High Skills: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors., • Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory and lift and/or move up to 50 pounds. Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level hardware roles, including as Principal Hardware Engineer and Senior Principal Hardware Engineer. The specific level will be dependent on the applicant's level of experience. In general, this role is responsible for planning the architecture and development of high-speed hardware design. Experience with RF design is a plus. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Board-level high-speed digital design and schematic capture, • Digital system architecture development & partitioning, • Analyze systems for developing System Requirement Specifications, • Develop detailed designs and technical documentation, • Provide training and mentoring to junior level engineers, • Provide project estimates and technical support for the Sales Process, • Collaborate with other engineers in design and integration efforts.Required Specialized Skills/Knowledge, • Understanding high-speed PCB design and EMC compliance issues, • Design for Testability and Manufacturing, • System and Timing Analysis, • Extensive experience with Altium Designer, • FPGA design experience (100K+ Gates), • Expertise in digital systems, • Experience designing with Bluetooth, USB, Ethernet, Wi-Fi and flash memory, • Excellent analytical and communication skills, • Project leadership skills, • Highly motivated, well-organized self-starterEducation and Experience, • Bachelor of Science in Electrical Engineering (MS Preferred), • 10 years of hardware design experienceOther Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Position is eligible for a variety of bonuses including client referrals, employee referral, publications, and extra effort. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job Description Job Summary: The Sr Manufacturing Engineer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience., • Relevant certifications (i.e. MasterCam programming) are highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job DescriptionDescription: Position Summary: The Senior Manufacturing Engineer will be responsible for contributing to the design of production machinery and will identify and recommend solutions to production problems related to materials, processes, and tooling. They will troubleshoot and diagnose assembly processes and reduce total defects through the analysis of data and corrective actions. This position will also support the functions of the WG Engineering Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Design and/or enhance manufacturing processes to assemble a bill of materials into a final product., • Utilize methods for waste minimization within a manufacturing system and address productivity., • Lead process improvements and controls through use of analysis and inspection/validation techniques, • Document Corrective Actions and Preventative Actions., • Generate, validate, and update as needed assembly work instructions in a clear and presentable configuration., • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Support both assembly floor priorities and longer-term development project activities., • Meet required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum bachelor's degree (BA/BS) in mechanical, electrical, manufacturing engineering, or equivalent., • Knowledge of standard manufacturing techniques such as fastening, structural adhesive bonding, hand assembly/low volume operations and tools and functional product testing., • Experience with precision alignments and tolerance analysis., • Use of techniques such as additive manufacturing/3D printing to create assembly floor aids and holding fixtures., • Experience with methods for process improvement and control., • Knowledge of incoming inspection and validation techniques, such as optical inspection and CMM., • Basic knowledge of the requirements of an ERP system for product specifications and bills of materials and routings., • Strong organizational and time management skills with the ability to successfully manage multiple tasks in a fast-moving environment. Preferred Qualifications: • Experience in additional disciplines such as electrical/electronic, computer/data acquisition, optics., • 5+ years of experience in new product introduction and sustaining engineering., • Working knowledge of SolidWorks and PDM., • Experience in utilizing automation such as robotic assistance and metered dispensing systems, PLC, and Vision Systems as utilized for aiding productivity in manufacturing., • Knowledge of Six Sigma analysis for process improvement and control., • Experience providing input on existing and forthcoming designs as related but not limited to DFMA. Supervisory Responsibilities: None. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Akkodis currently has a Senior Software Engineer position with a client located in Rochester, NY. This is an onsite position, so the person needs to live within 40 miles of Rochester, NY. No C2C or agencies allowed with this position. Rate Range: $65.00/hour to $75.00/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Senior Software Engineer who will focus on solving complex technical challenges, helping to guide technical decision-making, and mentoring other engineers. This full-time position offers an immersive experience in system architecture, hands-on design, and cross-functional project collaboration, all while contributing to a dynamic new product development portfolio. Specifically, this role will involve: · Systems Architecture: Contribute to both high-level system frameworks and low-level design details. Integrate subsystems, participate in testing, and observe how technical decisions align with broader business goals. · Hands-on Development: Get involved with the end-to-end process—from initial concept and design to build, test, and pilot shipments. · Cross-functional Collaboration: Work closely with engineers and scientists from other disciplines, including electrical and optomechanical engineering, color science, spectroscopy, and data analysis. · Technical Reporting: Design and conduct experiments and analyze qualitative and quantitative data to support future development decisions. The ideal candidate should have: · Educational Background: Completed a Bachelor’s or Master’s program in Computer Science, Electrical Engineering, Computer Engineering, or a related field. · Work Experience: 8+ years of work experience in a related field is desirable (or a Master’s degree and 5+ years of experience) Desired Skills: · Eagerness for collaboration, learning, and contributing innovative ideas · An understanding of experimental methods and an interest in automation · Strong knowledge of C++ fundamentals, including more modern concepts such as move semantics, copy elision, and concurrency with the standard library · Deep experience with revision control (Git), build systems, and other ‘Devops’ infrastructure, and a desire to continuously improve workflows · Advanced automation and data analysis in a scripting language like Python/MATLAB · Intermediate knowledge of electrical circuits and microcontrollers · Experience with low-level communication interfaces such as SPI or I²C · Strong analytical abilities, clear technical communication, and a proactive approach to problem solving If you are interested in this Senior Software Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to . If you have questions about the position, please contact Jim Tobin at mailto:"> Equal Opportunity Employer/Veterans/Disabled Pay Details: $65.00 to $75.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionGlobal Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level. Diverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set. Commitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish. Continuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career. Inclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard. Our Evolution and Your Role in It Akkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success. Empowering the Future We're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering. Join the Akkodis Community At Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.Global Footprint, Local Impact: As part of the world's second-largest ER&D company, you'll join a network of 50,000 professionals across 30 countries, each contributing to impactful projects worldwide while benefiting from a close-knit community at a local level.\r\n\r\nDiverse Career Paths: With services ranging from specialist recruitment to cloud infrastructure and sustainability, Akkodis offers a multitude of career paths. Whether you're a software developer, data analyst, or sustainability expert, there's a place for your skill set.\r\n\r\nCommitment to Innovation: Innovation is our cornerstone. With continuous investments in analytics and market intelligence, we not only predict the future of technology – we create it. Your ideas and innovations will have the space to flourish.\r\n\r\nContinuous Learning and Development: The Akkodis Academy offers unrivaled opportunities for learning and professional growth, ensuring you remain at the forefront of your field. Our culture values continuous improvement, both for our company and for your career.\r\n\r\nInclusive and Collaborative Culture: We believe in the power of diverse perspectives and collaborative work environments. At Akkodis, you'll find a community where inclusivity drives innovation and where every voice is heard.\r\n\r\nOur Evolution and Your Role in It\r\n\r\nAkkodis emerged from the strategic merger of AKKA Technologies and Modis in 2023, under the Adecco Group. This fusion created a powerhouse in digital engineering and technology, blending European engineering finesse with global technological capabilities. As we write our next chapter, your skills and vision will be instrumental in driving our continued success.\r\n\r\nEmpowering the Future\r\n\r\nWe're not just creating solutions; we're empowering industries to be more efficient, sustainable, and forward-thinking. Our work in industrial automation, product development, and custom software solutions is setting new standards in technology and engineering.\r\n\r\nJoin the Akkodis Community\r\n\r\nAt Akkodis, you're more than just an employee – you're a vital part of a community shaping the future. We're excited to see where your expertise can take us. Discover where you fit in our diverse range of opportunities and start engineering a smarter future with us today.

Job Description Javlyn Process Systems a member of Krones Process Group North America is seeking a skilled Electrical Controls Engineer to develop, design, and implement electrical and automation systems for liquid processing facilities. The ideal candidate will have a strong background in industrial control systems, electrical schematics, and process automation specific to fluid handling systems. Javlyn Process Systems is a process engineering and control system integration company employing degreed Computer, Electrical, Chemical, and Mechanical engineers. Our focus is on providing automated process system solutions for the food, beverage, dairy, and pharmaceutical industries. We fulfill a niche within these industries by offering custom solutions and professional services to design and operate manufacturing facilities under optimal conditions. We are a subsidiary of Krones AG, an international firm with over 20,000 employees worldwide. Key Responsibilities: • Electrical Design & Documentation, • Develop detailed electrical design packages including control panel layouts, wiring, • diagrams/schematics and I/O lists., • Develop Motor Control Center designs and layouts., • Select and specify electrical components (PLC I/O, Safety Equipment, VFDs, Enclosures,, • etc.) suitable for liquid processing environments., • Ensure compliance with industry standards., • Process Integration, • Collaborate with process engineers to integrate control systems with pumps, valves and field instrumentation that measure temperatures, flows, pressures, levels, etc., • Project Execution & Support, • Participate in cost estimating., • Lead electrical checkout efforts at control panel fabrication shops., • 5 to 15 years of experience in electrical and automation design, preferably in the liquid processing industry (e.g., dairy, food, brewing, chemical, etc)., • Experience designing control systems with PLC’s, • Proficiency with AutoCAD and/or AutoCAD Electrical., • Proficiency with Microsoft Word and Excel., • Knowledge of applicable electrical codes and standards., • Degree or diploma in Electrical Engineering, Automation, or related field., • Familiarity with process instrumentation., • Combination of office-based design work and field/site visits. Travel (20-25%) throughout the U.S. is required. The amount of travel varies based on project assignments, project location, and level of responsibility.

Job Description We are seeking a hands-on and technically driven Quality Engineer to support and strengthen our Quality and Engineering team within a precision CNC machining environment serving the aerospace and defense industries. This role requires strong analytical and problem-solving skills, a proactive floor presence, and the ability to bridge theoretical quality principles with real-time production support. The successful candidate will play a key role in driving continuous improvement, ensuring compliance with industry standards (AS9100, ISO9001, NADCAP), and mentoring quality personnel. Key Responsibilities: • Maintain a strong presence on the production floor to support real-time resolution of quality issues., • Guide operators through inspection procedures and troubleshooting quality concerns on the spot., • Conduct and support various inspection types, including:, • First-Piece, In-Process, Final, and Open Plate Inspections, • Source Inspections and First Article Inspections (FAI), • Oversee CMM operations and programming using Zeiss Calypso (required)., • Utilize precision measuring tools (micrometers, calipers, height gauges, comparators) to validate dimensional tolerances, finishes, and part conformity per GD&T., • Lead and document non-conformances (NCR/INCR), perform root cause analyses (RCA) using tools like 5 Whys, Fishbone Diagrams, FMEA, and develop CAPAs., • Assist with preparing and maintaining PPAP, FAIR, and other aerospace quality documentation., • Audit and ensure adherence to company procedures, quality systems, and regulatory compliance., • Support process control development and collaborate with operations to improve quality at the source., • Specify and order inspection gauges and oversee calibration and gauge control requirements., • Create user-friendly visual aids and inspection documentation for operator use., • Education:, • Bachelor’s degree in engineering, manufacturing, or related field with 3–6 years of quality engineering experience, • OR associate degree with 5+ years of progressive quality experience and strong understanding of quality principles. (Must Have)Required Technical Skills & Experience: * • Expertise in AS9100 (or AS9100D), aerospace quality compliance standards, is required, NADCAP is preferred, and ISO 9001 compliance is required., • Prior experience in aerospace precision CNC machining environments, required., • Proficiency in GD&T interpretation and aerospace blueprint reading, required., • Zeiss Calypso CMM programming experience (required), • Experience with ERP/MRP systems (Epicor preferred), • Familiarity with CAD/CAM models and software like Mastercam or PartMaker, required., • Experience conducting and documenting First Article Inspections (FAI), PPAP, and FAIR, required.

Job DescriptionResponsibilities: • Must be able to read engineering technical drawings and use basic hand tools like digital calipers, etc., • Conduct quality control inspections throughout the production process, including first-article, in-process, and final pre-shipment inspections, • Perform visual (workmanship) evaluations and functional testing as applicable (measurements, assembly, etc.), • Verify packaging and labeling for accuracy and compliance, • Serve as an on-site third-party Quality Engineering Inspector, • Visually inspect and record all weld components of each product, • Manage and oversee additional inspectors assigned to your site, • Conduct technical sorts and/or rework as required by client specifications, • Provide timely, detailed inspection reports with photographic evidence of products, packaging, labeling, and any defects found, • Submit daily and weekly reports using Microsoft Word or Excel Skills & Experience Requirements: • Minimum of 3 years of experience in a quality-related position, • QC Engineer with an Electrical Inspection background is preferred, • Strong visual inspection skills, especially for weld components, • Ability to work independently with minimal supervision, • Familiarity with and adherence to ProQC and client site safety and operational guidelines, • Strong communication skills

Job Description We are in search of a capable candidate to play a key role in a broad spectrum of projects, encompassing everything from large utility infrastructure projects and athletic fields to land development work and higher education facilities. This dynamic position involves direct engagement with clients in the public sector, offering the candidate a valuable opportunity to interact directly with them. The role requires versatility, as the candidate will contribute to projects with diverse scopes, showcasing their ability to navigate challenges across various disciplines. Duties • Plan and design large scale infrastructure, land development and athletic field projects., • Oversee and guide projects from initial concept through construction closeout., • Mentor and lead project team and direct reports, • Perform and review detailed hydraulic calculations., • Produce effective and high-quality project documents (including reports, drawings, and specifications), • Provide bidding and construction administration services., • Assist in the preparation of project proposals., • Communicate directly with and maintain client relationships. Salary Range: $65,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • 5+- years’ experience, • Registered as a Professional Engineer or ability to obtain license within 1-yr, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Effective communication skills using oral, graphic and written forms, • Ability to perform assigned tasks with minimal supervision, • Ability to travel to project sites and work remotely as needed, • Ability to manage workload and budgets as allocated Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Onsite Senior Mechanical Engineer needed for an 18-month contract to hire opportunity with Yoh’s client located in Rochester, New York. Pay Rate: $100- $120 per hour The Big Picture – Top Skills You Should Possess: • Solid interpersonal skills, • Strong analytical skills, • Responsible for mechanical design/packaging electronics, • Required to meet with project stake holders on a regular basis to understand technical issues and develop solutions, • Independently, develops and implements concepts for range of significantly complex product issues and engineering solutions, • Technically lead and/or execute engineering projects and spearhead research and development of new technologies, as appropriate, • Problem identification and troubleshooting a wide range of significantly complex engineering problems, • Specify or perform significantly complex engineering analysis, • Interface with internal and external customers regarding significantly complex engineering issues to address customers High Value Problems (HVP) for a range of products, • Generate product specifications, • Define, coordinate, perform, and document engineering tests, • Specify and review engineering documentation and engineering processes What You Need to Bring to the Table: • 10+ years of experience with a Bachelor of Engineering degree in Mechanical Engineering or related field, • A minimum of 7 years’ experience in mechanical engineering and design, • Experienced in 3D CAD systems (NX or Solidworks) and Teamcenter is preferred, • Hands-on experience with mechanical development and design of high voltage products, • Experience in analysis, testing, troubleshooting, diagnosing, and root-causing electro-mechanical systems Bonus Points! Otherwise Known As Preferred Qualifications: • Proficient in the use of MS Excel, Word, PowerPoint, and related software, • Good analytical and problem-solving skills with high attention to detail, • Be a team player and have the ability and self-motivation to learn quickly and independently, • Demonstrate strong technical leadership skills and a commitment to delivering high quality products while adhering to strict deadlines, • Foster an environment that welcomes and encourages new and innovative design concepts, inventions, patents, and product opportunities What’s In It For You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. • Medical, Dental & Vision Benefits, • 401K Retirement Saving Plan, • Life & Disability Insurance, • Direct Deposit & weekly e-payroll, • Employee Discount Programs, • Referral Bonus Programs What are you waiting for? Apply Now! Estimated Min Rate: $100.00 Estimated Max Rate: $120.00 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job DescriptionDescription: Where Precision Meets Possibility We don't just make parts - we craft perfection down to the micron. At Addison Precision Manufacturing, we're the masterminds behind the components that power aerospace innovations, advance medical breakthroughs, and drive manufacturing excellence. Our arsenal? State-of-the-art technology and advanced machinery paired with unmatched expertise that set industry standards in precision machining. We're not your average manufacturing facility. We're a team of precision perfectionists who: Transform raw materials into aerospace marvels, create components that save lives in medical devices, set the gold standard in manufacturing excellence and deliver quality that keeps our clients coming back. If you believe that 'good enough' isn't good enough, and precision is your passion, you might just be who we're looking for. Join us in shaping the future of precision manufacturing - where every thousandth of an inch matters, and excellence isn't just a goal, it's our standard operating procedure. Position Summary We are seeking a skilled Quality Engineer to drive quality excellence through process improvement, quality system management, and engineering solutions. This role combines technical expertise with leadership to ensure product quality, maintain compliance standards, and foster a culture of continuous improvement across the organization. This hands-on role requires significant shop floor presence, working directly with inspectors and operators to ensure quality standards are maintained in real-time. The ideal candidate must be comfortable balancing theoretical quality principles with practical, day-to-day production support. Key Responsibilities: • Maintain an active floor presence throughout production areas and work directly with quality personnel to resolve quality issues in real-time., • Guide operators through complex inspection requirements and troubleshoot quality issues on the spot., • Collaborate with customers to complete source inspections., • Support production with immediate quality decisions., • Ensure proper use of inspection equipment and validate inspection methods in real production conditions., • Assist quality leadership personnel with auditing company policies, procedures, and systems that affect product quality to assure compliance with the company’s quality system and good manufacturing processes., • Establish and implement product and process quality standards while remaining in compliance with ISO9001, AS9100 and NADCAP requirements., • Lead INCR/NCR investigations., • Complete analysis on incoming products and approve all product receipts., • Inspect and test materials, equipment, processes, and products to ensure quality specifications are met., • Develop user-friendly inspection documentation for operators, such as visual aids and inspection guidelines., • Develop First Article Inspection (FAI) documentation and procedures., • Maintain inspection documentation system and update inspection procedures., • Specify and order appropriate inspection gauges and develop gauge control and calibration requirements., • Identify customer flow down requirements., • Collaborate with operations managers on process control development., • Develop, implement, and validate corrective actions for quality issues to prevent issue recurrence. What We Offer • Competitive salary based on experience, • Career development opportunities, • Climate-controlled work environment, • State-of-the-art machinery and equipment Benefits: • 401(k), • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Bachelor’s degree in engineering, Manufacturing, or related technical field with 3+ years quality engineering experience OR associate’s degree in related technical field with 5+ years of progressive quality experience in manufacturing and comprehensive understanding of quality principles., • Demonstrated proficiency in GD&T and blueprint reading., • Experience with measurement equipment and gauging systems., • Practical knowledge of SPC and quality tools., • Understanding of ISO 9001, AS9001 and NADCAP quality systems., • Background in manufacturing environment – precision machining or aerospace highly preferred., • High proficiency in computer technology and systems operations., • Strong analytical and problem-solving skills couples with an attention to detail. Environment & Physical Demands • Regularly required to stand, walk, stoop, kneel, crouch, and communicate effectively (talk/hear)., • May involve prolonged periods of both sitting and standing depending on task requirements., • Specific vision abilities include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus; prolonged magnified inspection may be required, which can lead to eye strain., • Requires good hand-eye coordination and dexterity in hands, arms, and fingers, including the ability to grasp and manipulate small components., • Frequent use of computers and other standard office or manufacturing equipment., • May involve handling of oils, solvents, and cleaning solutions—lab coats provided to minimize exposure., • Typically performed in a clean environment; employees are expected to help maintain cleanliness standards., • Safety glasses are required at all times; additional safety training may be required depending on the area., • The work is performed in a manufacturing setting where noise levels are generally loud., • May rotate between different workstations or shift tasks during the production process based on operational needs.

Job DescriptionManager, Mechanical Engineer Description If you are a team player with a passion to drive your career in Mechanical Engineering, we are the place for you! We are seeking Mechanical Engineer Manager to add to our growing and talented team. Responsibilities • Lead and perform engineering evaluations and analyses, field inspections, design drawings, technical specifications and cost estimations., • Lead and perform standard mechanical engineering analysis of existing and new building mechanical, plumbing and fire protection systems utilizing the latest codes and technologies to provide optimized designs., • Knowledge of NYS Mechanical, Energy and Plumbing codes, NFPA., • Proficiency in AutoCAD, Revit MEP and Microsoft Office Suite., • Ability to work in a team and communicate effectively both written and verbally., • BS in Mechanical Engineering/Engineering Technology, • NYS PE required, • 10+ years of post-college experience., • Specific areas of expertise include chilled and hot water systems, industrial process related mechanical, building HVAC, controls, plumbing systems and fire protection., • Professional in-office environment, • The job requires prolonged periods of sitting at a computer., • Travel may be required within NY State. We are a well-established multi-disciplinary architecture and engineering firm that has been serving clients since 1982. With four decades of experience and expertise, we have evolved from a transportation engineering firm to a comprehensive, full-service organization with seven office locations in New York State. Our extensive portfolio of successful projects has earned us a trusted reputation among our clients. Benefits • 3 weeks Vacation/PTO, • Medical, • Dental, • Vision, • Safe Harbor 401k, • Life Insurance, • HSA Contribution 1K per year, • Cell Phone and Meal/Travel Reimbursement, • Tuition Reimbursement • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 04/04/2025 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Overview CTG's long-standing Fortune 500 client of over 15 years has a W2 contract assignment for a Quality Engineer II. Type: Contract Job Title: Quality Engineer II Location: Woodland, CA Candidates must be able to commute and work onsite in Woodland, CA Pay Rate: $44.43 to $58.24/hour Work Hours: M–F 8am–5pm Education: Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Description The Quality Engineer II will develop and support all Quality Management System (QMS) and Regulatory Affairs (RA) activities in alignment with site quality goals and metrics. This role is responsible for new product setup, quality project management, and ensuring regulatory compliance for serum products. The position will ensure compliance with in-house and external specifications and standards such as cGMPs, 21 CFR 820, ISO 13485, and Quality System Procedures. Requirements • Ensure compliance with new and changing regulations impacting products and processes, including QSR’s and global import/export regulations, • Manage new product setup and related projects, • Support supplier audits as needed, • Collaborate with USDA on regulatory compliance, including approvals, import/export compliance, traceability, quarantine, safety testing, and affidavits, • Serve as a resource for customer regulatory and technical inquiries, • Maintain ISO 13485-based quality system, • Implement and manage CAPA (Corrective and Preventive Actions) and problem resolution, • Lead quality documentation, nonconformance reports, inspection activities, and product disposition, • Review and revise procedures, specifications, and forms to maintain and improve the QMS, • Act as the Quality Help Desk and customer complaint contact for problem resolution, questionnaires, certificates, and surveys, • Perform internal audits in support of internal requirements, 21 CFR 820, and ISO 13485 compliance, • Represent the organization in customer quality audits, supplier quality audits, and regulatory inspections, • Conduct investigations and analyses to resolve quality issues, • Collaborate with cross-functional teams to support quality system implementation, • Create new product master files to meet customer and quality system requirements, • Ensure compliance with company policies and departmental procedures, including product performance verification, problem investigation, process improvements, and non-conformance prevention, • Provide training on quality systems and applicable regulations, • Track and trend QMS metrics, • Perform other duties as assigned Required Qualifications Education • Bachelor’s degree in Science, Engineering, Bioengineering, or related field (Chemistry or Biology preferred) Qualifications • Minimum 3 years’ experience in Quality or Regulatory, preferably in medical device, pharmaceutical, or biotechnology industries, • Strong knowledge and application of Quality Systems Regulations 21 CFR 820 and ISO 13485, • Ability to develop, update, and train on SOPs, • Experience performing internal/external audits, • Ability to monitor QMS activities, including Change Control, CAPA, Complaints, and Nonconforming Materials/Products, • Problem-solving skills for investigations and root cause analysis, • Experience with Continuous Improvement, Lean, or Six Sigma Desired Qualifications • SAP, EtQ, and/or PeopleSoft experience, • Statistical analysis experience, • Project management experience, • Knowledge of animal by-product import/export regulations, • Background in animal health, virology, immunology, or epidemiology Soft Skills • Strong organizational, time management, and attention to detail skills, • Excellent interpersonal and communication abilities, • Ability to work independently and influence others in a collaborative team environment Additional Information • No third party resumes will be accepted, • Drug testing and/or other employment-related inquiries may be conducted, • CTG will consider for employment-qualified applicants with criminal histories in a manner consistent with the requirements of all applicable local, state, and federal laws, • All interested individuals MUST be able to work on a W2 Tax basis (no C2C or third party vendors), • CTG is an Equal Employment Opportunity employer, • CTG is an E-Verify Company To be considered for this opportunity, please apply directly through our website by clicking the link below or email your Word version resume and salary expectations to . The expected base salary for this position ranges from $44.43 to $58.24/hour. Salary offers are based on relevant skills, training, experience, education, market factors, and applicable licensure or certifications. In addition to salary, a competitive benefits package is offered.

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job DescriptionAchieve more with Volt Volt is immediately hiring for a Manufacturing Engineer in Rochester, NY As a Manufacturing Engineer you will: The Manufacturing Engineer II operates with minimal supervision and is responsible for designing, implementing, and optimizing manufacturing processes within a single facility. This role supports the production of both new and existing products by improving efficiency, quality, cost, and safety. It may also involve planning assembly layouts, testing new systems, and managing capital projects, all while ensuring compliance with regulatory standards. • Plans and designs basic manufacturing processes, • Determines equipment and tooling needs, • Develops and implements efficiency, safety, and cost-focused projects, • May lead small teams, • Advises on design concepts and specifications, • Ensures processes meet regulatory standards, • Applies technical standards and principles, • Investigates and resolves quality issues, • Suggests corrective actions, • Performs other duties as assigned This is a full time, Direct Hire opportunity. The ideal candidate will have: • Bachelor’s Degree in Engineering or related field, • 2–5 years of relevant experience, • Proficient in applying engineering concepts to solution lines, • Strong analytical and problem-solving skills, • Experience with continuous improvement methods (e.g., pull systems, JIT, process mapping), • Working knowledge of:, • Data structures and database programming, • CAD/CAM and computer-aided manufacturing systems, • Standard business and data analysis software, • Engineering drawings and specifications, • Geometric dimensioning and tolerancing (GD&T), • Strong verbal and written communication skills, • Well-organized, detail-oriented, and able to multitask, • Proficient in Microsoft Office Suite (Word, Excel, PowerPoint, Access, Outlook) Salary: $70,000-$80,000 *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. Volt is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Volt is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please call (866) -898-0005. Please indicate the specifics of the assistance needed. Volt does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior PCB Layout Designer Job Code: 28025 Job Location: Rochester, NY Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: At L3Harris, you'll design PCBs that power the most advanced radio communication equipment in the world - trusted by the military and first responders when every second counts. As a Principal PCB Layout Engineer, you'll play a key role in developing cutting-edge rigid, flex, and rigid-flex printed circuit boards, while mentoring the next generation of designers and shaping our design processes. The PCB Designer will effectively utilize design software deployed at L3Harris to create, modify, review, and validate PCB designs for rigid, flexible, and rigid-flex printed circuit boards. You'll utilize the latest board technologies: fine line and spaces, microvias, stacked microvias, via-in-pad, etc. This is not just a design role - it's an opportunity to lead, innovate, and influence the future of PCB layout engineering at a company where your work has real-world impact. Essential Functions: \n • Utilize Mentor PADS layout software to incorporate schematic, mechanical, and manufacturing inputs into new and revised HDI PCB designs. \n, • Collaborate with the cross-functional design team to resolve fabrication, assembly, and test issues identified through Valor NPI fabrication and manufacturing checks. \n, • Create PCB stackups and model-controlled impedance. \n, • Create highly complex PCB layouts leveraging design methodologies by board technology, e.g., RF, digital, analog, power supply and mixed technologies. \n, • Perform peer reviews of complex PCB layout designs. \n, • Create and maintain PCB layout design guidelines. \n, • Lead the assessment and implementation of new and upgraded PCB design software. \n, • Develop and document best practices related the PCB design process. Create and update templates, checklists, and procedures. \n, • Mentor less experienced PCB Designers. \n, • Knowledge of the PCB design value chain: schematics, materials, fabrication, assembly, and related design and simulation software tools. \n, • Knowledge of the PCB design elements: schematic, BOM, mechanical, fabrication, assembly, components, and all related files and documentation. \n, • Experience mentoring and onboarding less experienced and early career PCB Designers. \n, • Experience with peer reviews of PCB layout designs. \n L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Bachelors or Masters degree in Chemical Engineering.

Ability to interact with teams that include operators, mechanics, chemists, management and other engineers. Bachelor of Science Degree or Masters in Chemical Engineering, Mechanical Engineering or related discipline. Eastman Kodak Company is looking for a Chemical Process Engineer to support our Kod