Process engineer jobs in Hauppauge, New YorkCreate job alerts

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Our client is looking Manufacturing Engineer for Long Term project in Bohemia, NY (Onsite) Below is the detail requirement. Role: Manufacturing Engineer Location: Bohemia, NY (Onsite) Job Description: • Define and solve technical problems in manufacturing, assembly, and testing environments., • Implement cost-saving and process improvement initiatives on assigned product lines., • Collaborate with design engineering teams to enhance manufacturability of products., • Develop efficient production workflows and determine optimal sequencing of operations., • Prepare cost estimates for proposed projects and analyse cost factors., • Support facility layouts for manufacturing processes and equipment as needed., • Solve manufacturing challenges of varying complexity., • Design tools, fixtures, and gauges using SolidWorks or similar to improve manufacturing processes and address safety concerns., • 3D printing of fixtures., • Create detailed assembly work instructions using Microsoft Power Point., • Program laser printers and develop operator instructions for laser printing processes., • Utilize RTX-Lifecycle-Program-Management (RLPM) for New Product Introduction projects (NPI) to develop build plans for new designs., • Develop and maintain production routers and bill of materials., • Collaborate with quality and suppliers to resolve quality and technical issues., • Conduct compliance reviews to ensure conformance with customer specifications and requirements., • Support the project pipeline process to select, prioritize and scope projects to increase First Pass Yield and throughput across the value stream, • Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and CORE initiatives., • Drive targeted manufacturing process optimization activities using MRL tools such as Process Control Plans and PFMEA Qualification: Bachelor’s degree in industrial, Manufacturing Engineering

Manufacturing Engineer Contract role Bohemia, NY • Define and solve technical problems in manufacturing, assembly, and testing environments., • Implement cost-saving and process improvement initiatives on assigned product lines., • Collaborate with design engineering teams to enhance manufacturability of products., • Develop efficient production workflows and determine optimal sequencing of operations., • Prepare cost estimates for proposed projects and analyse cost factors., • Support facility layouts for manufacturing processes and equipment as needed., • Solve manufacturing challenges of varying complexity., • Design tools, fixtures, and gauges using SolidWorks or similar to improve manufacturing processes and address safety concerns., • 3D printing of fixtures., • Create detailed assembly work instructions using Microsoft Power Point., • Program laser printers and develop operator instructions for laser printing processes., • Utilize RTX-Lifecycle-Program-Management (RLPM) for New Product Introduction projects (NPI) to develop build plans for new designs., • Develop and maintain production routers and bill of materials., • Collaborate with quality and suppliers to resolve quality and technical issues., • Conduct compliance reviews to ensure conformance with customer specifications and requirements., • Support the project pipeline process to select, prioritize and scope projects to increase First Pass Yield and throughput across the value stream, • Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and CORE initiatives., • Drive targeted manufacturing process optimization activities using MRL tools such as Process Control Plans and PFMEA Qualification: • 'Bachelor’s degree in industrial, Manufacturing Engineering

FlexStaff is seeking a Senior Quality Engineer to join our client's team, a registered ISO 9001 company that designs and manufactures products for the military and aerospace industry. This position is permanent, full-time, onsite at their Deer Park location. The Senior Quality Engineer is responsible for implementing and executing inspection, testing, and evaluation methods to ensure that products meet or exceed company and customer quality standards. This role involves collaborating with internal teams, suppliers, and customers to maintain consistent product quality, drive continuous improvement, and promote a culture of quality throughout the organization. Quality Engineering Responsibilities: • Participate in root cause analysis of product or process failures., • Respond to, implement, and follow up on corrective actions for internal, supplier, and customer issues., • Schedule and prepare Material Review Board (MRB) meetings; track corrective actions and MRB outcomes., • Collect, organize, monitor, and distribute supplier quality and delivery performance data., • Ensure procedures and work instructions are documented in compliance with corporate and ISO standards., • Evaluate potential new suppliers through audits or self-assessment and oversee supplier qualification processes., • Support supplier evaluation programs to ensure key characteristics and in-process controls are well-defined and effective., • Assist with inspection processes and ensure purchased products are designed for manufacturability., • Clearly define product quality requirements and identify key characteristics for First Article Inspection (FAI)., • Prepare and review FAI and EIDP reports; improve supplier engagement in the FAI process to support product revisions and new product launches., • Maintain environmental lab testing equipment and perform environmental tests according to customer or engineering requirements., • Prepare and schedule test plans; provide recommendations, specifications, and data requirements., • Assist with environmental testing conducted by independent testing laboratories., • Perform internal audits and support the development and monitoring of key performance indicators (KPIs) for departments., • Operate and program measuring equipment, including CMMs, Zygo Interferometers, Spectrometers, and other precision instruments., • Conduct internal training sessions to ensure employees are familiar with quality procedures and best practices., • Perform basic incoming, in-process, and final inspections as needed. General Quality Responsibilities: • Support and promote a culture of quality throughout the organization., • Help ensure that company quality goals and compliance requirements are met., • Understand customer specifications and assist in meeting their requirements., • Maintain awareness of ISO 9001 standards and help ensure compliance., • Assist in developing and maintaining clear quality procedures and documentation., • Monitor and report on quality performance using data and inspection results., • Support continuous improvement efforts by identifying issues and recommending corrective actions., • Provide input for training needs related to quality processes. Additional Quality Support Tasks: • Assist with maintaining environmental lab equipment and testing processes., • Coordinate with independent labs for environmental testing as required., • Review inspection reports and support investigations on nonconforming products., • Support MRB (Material Review Board) processes., • Participate in contract reviews to address quality-related items., • Review customer specifications and communicate requirements to the team., • Assist with DMR (Discrepant Material Reports) and RMA (Return Material Authorization) evaluations., • Perform final, in-process, and source inspections of assemblies., • Assist with root cause investigations and failure analysis., • Support incoming, in-process, and final inspections as needed. Qualifications: • Bachelor’s degree in Engineering, Quality, or a related field preferred., • Experience with supplier quality management, audits, FAI processes, and ISO standards., • Proficiency with precision measurement tools and equipment (CMM, interferometers, spectrometers, etc.)., • Strong analytical, problem-solving, and communication skills., • Ability to manage multiple projects and work collaboratively across departments.

Date Posted: 2026-02-20 Country: United States of America Location: US-NY-BOHEMIA-355 355 Knickerbocker Ave KNICKERBOCKER Position Role Type: Unspecified U.S. Citizen, U.S. Person, or Immigration Status Requirements: Security Clearance Type: Security Clearance Status: Not Required Aerospace Lighting Corp. d/b/a Collins Aerospace has an opening for a Senior Engineer, Engineering-Operations in Bohemia, NY. Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. What YOU will do \n • Plan and perform professional manufacturing engineering activities with various complexities by applying engineering design principles and product line experience.\n, • Apply engineering principles to design, develop, test and implement various assembly fixtures and aid tools.\n, • Prepare plan, process specifications and procedure, MRP support studies, factory cost work.\n, • Conduct analysis and test of routine degree of complexity.\n, • Analyze engineering data and change notices to create manufacturing bill of materials and routings for various product lines.\n, • Implement, develop and maintain product/process improvement.\n, • Perform root cause analysis with various teams.\n, • Analyze and find solutions technical, operation and quality issues related to production line.\n, • Participate in product review and evaluate manufacturability of new product designs.\n\n Qualifications You Must Have \n • Must possess at least a bachelor's degree or its equivalent in Mechanical Engineering, Manufacturing Engineering or a related field and at least 5 years of progressive experience as a Mechanical Engineer, Manufacturing Engineer or related role in an industrial manufacturing environment. In the alternative, must possess at least a master's degree or its equivalent in Mechanical Engineering, Manufacturing Engineering or a related field and at least 3 years of experience as a Mechanical Engineer, Manufacturing Engineer or related role in an industrial manufacturing environment would be acceptable.\n, • Must possess at least 3 years of experience supporting a Manufacturing Shop Floor in the Aerospace industry with use of Macola, Teamcenter and SharePoint.\n, • Must possess at least 3 years of experience with 3D CAD design software and manufacturing drawing creation, with Expert Level Knowledge in 3D Design Tools (Solid Edge, CATIA, SOLIDWORKS).\n, • Must possess at least 3 years of experience implementing Lean Manufacturing Principles and methodologies.\n, • Must possess at least 3 years of experience designing assembly and testing fixtures for complex aircraft lighting products.\n, • Non-US Person - Must be authorized to work in the U.S. without the company's immigration sponsorship now or in the future. The company will not offer immigration sponsorship for this position. The company will not seek an export authorization for this role. \n\n Learn More & Apply Now! Interiors: At Collins Aerospace, our Interiors team is focused on innovation, safety and cost efficiency. But we don't just get people from point A to point B. We're committed to making air travel more comfortable, connected and secure. As a leader in aviation interior products and services, we're helping airlines and original equipment manufacturers create a positive experience for their customers. With offices and manufacturing facilities in more than 12 states across the U.S. and more than 10 countries around the globe, we're changing the game of aircraft interiors. Are you ready to join our team? Onsite: Employees who are working in Onsite roles will work onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range is $129,251.00 to $182,000.00 USD per year. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Presidio, Where Teamwork and Innovation Shape the Future AtPresidio, we're at the forefront of a global technology revolution, transforming industries throughcutting-edge digital solutions and next-generation AI. We empower businesses-and their customers-to achieve more through innovation, automation, and intelligent insights. The Role Presidio is seeking a Network Engineer to join our team to support our client base. This individual will lead small to large projects on their own or as part of a team, which includes planning, design, and implementation of complex network and security engagements. This is a consultative role providing network engineering services on project work and effectively managing the implementation process from design to customer acceptance. Travel Requirements: In this role you will be expected to travel up to 25%. Key Responsibilities: • Primary responsibilities include performing project-based engineering, design, staging, installation, validation, testing, and troubleshooting of data/security networks, • Lead complex, large scale Network and Security projects, • Create low-level detailed designs that align with the business strategy, the customer's budget, and operational support capabilities., • Network discoveries, • Perform Network and Security Assessments, • Presenting documentation and engagement deliverables to customers, • Collaborating as part of a multi-functional team with Sales, Pre-Sales, Project Management, and other delivery/engineering resources, • Trouble resolution of complex issues and assisting team members in solving problems with their deployments., • Working with junior members of the engineering team to successfully implement secure network solutions, • Experienced expert with complex multi-protocol routing and switching solutions, • Various security parameters and harden access to devices, • Core Routing and Switching platforms with a focus on design, configuration, and troubleshooting using Cisco Best Practices, • Network design and applications, including designing IP addressing, • OSPF, BGP, EIGRP. Redistribution of protocols and loop prevention, • TCP/IP protocol stack, TCP/IP headers and packets, the OSI model, and commonly used TCP/UDP ports and associated services, • Cloud Networking Experience, • AWS, Azure, GCP in Networking context, • Aviatrix, • Experienced deploying at least one SDWAN Solution with Viptela, Silverpeak, or Palo Prisma SDWAN, • Experienced in implementing security solutions such as:, • Palo Alto Networks Product Portfolio, • Panorama, • Prisma Access, • Prisma Cloud, • Cisco Security Product Portfolio, • FirePower / FTD Firewalls, Meraki MX: Configuration, tuning, troubleshooting, • FMC Management, • Strong level in routing and switching troubleshooting, • Solid verbal and written communication skills, • Bachelor's Degree or equivalent experience and/or military experience, • Fortinet Product Portfolio, • Fortigate FWs, FortiManager/FortiAnalyzer, • Arista Networking solutions, including CloudVision, • Aruba Product Suite, • Experience with Aruba CX and Aruba OS software, • VSX and VSF technologies, • High availability configurations, • Automation / Scripting: Python, EMM and TCL, • Active Cisco certification; CCNP, CCIE Preferred Ready to innovate? Let's redefine what's next-together. About Presidio Presidio is committed to hiring the most qualified candidates to join our amazing culture. We aim to attract and hire top talent from all backgrounds, including underrepresented and marginalized communities. We encourage women, people of color, people with disabilities, and veterans to apply for open roles at Presidio. Diversity of skills and thought is a key component to our business success. At Presidio, speed and quality meet technology and innovation. Presidio is a trusted ally for organizations across industries with a decades-long history of building traditional IT foundations and deep expertise in AI and automation, security, networking, digital transformation, and cloud computing. Presidio fills gaps, removes hurdles, optimizes costs, and reduces risk. Presidio's expert technical team develops custom applications, provides managed services, enables actionable data insights and builds forward-thinking solutions that drive strategic outcomes for clients globally. For more information, visit ___ Applications will be accepted on a rolling basis. Presidio is an Equal Opportunity / Affirmative Action Employer / VEVRAA Federal Contractor. All qualified candidates will receive consideration for this position regardless of race, color, creed, religion, national origin, age, sex, citizenship, ethnicity, veteran status, marital status, disability, sexual orientation, gender identification or any other characteristic protected by applicable federal, state and local statutes, regulations and ordinances. To read more about discrimination protections under Federal Law, please visit: ___ If you have any difficulty using our online system and need an accommodation in the job application process due to a disability, please send an email to ___ for assistance. Presidio is a VEVRAA Federal Contractor requesting priority referrals of protected veterans for its openings. State Employment Services, please provide priority referrals to ___. Notice to Massachusetts Candidates: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Recruitment Agencies, Please Note: Presidio does not accept unsolicited agency resumes/CVs. Do not forward resumes/CVs to our careers email address, Presidio employees or any other means. Presidio is not responsible for any fees related to unsolicited resumes/CVs. #LI-AV1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

Senior Manufacturing Engineer At Curtiss-Wright, we lead the design, engineering, and manufacturing of advanced systems and components for the aerospace and defense industry. We are seeking a Senior Manufacturing Engineer to join our team, a role that requires deep technical expertise, strategic thinking, and leadership in driving manufacturing excellence. This is an exciting opportunity for an experienced engineer to influence manufacturing processes at a high level, leading initiatives from concept through production, and ensuring the seamless transition of innovative products into full-scale manufacturing. LOCATION: Hauppauge, NY SALARY RANGE: $94,700 - $125,000/year Please note that the salary range information provided is a general guideline only, reflecting a position based in NY. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. WE TAKE CARE OF OUR PEOPLE Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * YOUR CHALLENGE: \n • Lead the development and implementation of advanced manufacturing methods, process flows, and operational sequences to optimize efficiency, quality, and cost.\n, • Design and oversee the creation of tools, fixtures, and assembly processes to support complex production requirements.\n, • Collaborate closely with design engineering to review product designs, ensure manufacturability, and drive smooth product launches.\n, • Perform detailed manufacturing cost analyses, establish labor standards, and recommend process and tooling improvements.\n, • Develop, maintain, and standardize manufacturing work instructions, standard operating procedures, and documentation.\n, • Mentor and guide cross-functional teams, including design, manufacturing engineering, production, procurement, quality, and inspection.\n, • Lead initiatives in lean manufacturing, process improvement, and labor efficiency, using data-driven analysis.\n, • Bachelor's degree in Mechanical, Manufacturing, or related Engineering discipline; advanced degree preferred.\n, • Extensive experience reading and interpreting complex technical drawings and specifications.\n, • Proficiency with CAD tools (e.g., SolidWorks) and other manufacturing design software.\n, • Deep understanding of mechanical and electronic assembly principles.\n, • Advanced proficiency in Microsoft Office Suite, including Excel, Word, PowerPoint, Project, and Outlook.\n, • Strong analytical, problem-solving, and communication skills, with meticulous attention to detail.\n, • Expertise in statistical analysis and applied mathematics (probability, geometry, trigonometry).\n, • Familiarity with manufacturing standards, process documentation, and ERP systems.\n Our Values Environmental, Social and Governance *Please note, benefits are country specific and may vary from location to location. #LI-YH1 No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Summary \n The Manufacturing Engineer 2 is responsible for the breakdown and definition of the labor effort required in accordance with Engineering and Quality Assurance specifications. \n Essential Functions \n\n • Compute cost estimates for new designs, and new customer designs, including established designs to reflect current goals and cost. \n, • Prepare detailed plan-schedule, estimates, and requisitions for special tooling and/or test equipment needed to manufacture and/or assemble parts to engineering requirements.\n, • Design and prepare tooling drawings such as drill, milling and assembly fixtures, punch and dies, etc. Prepare operation sheets for building assemblies. \n, • Make sketches as required to clarify fabricating or processing of parts, tools, or assemblies. \n, • Investigate shop problems with tools, parts or assemblies and applies the necessary corrective action with the affected work center. \n, • Coordinate with Engineering in the development of cost effectiveness and feasibility of new designs, as well as manufacturing and assembly methods. \n, • Incorporate engineering change orders to operation sheets. \n, • Liaison between manufacturing vendors and Purchasing Department. \n, • Prepare statements of work authorizing and guiding subcontractors in the fabrication of parts. \n, • Interface with subcontractors/customers in resolving manufacturing or drawing interpretation problems. \n, • Create and enter the Bill of Material and material code numbers in the Material Requirements Planning (MRP) system. \n, • Must be a U.S. Citizen.\n, • Ability to read, write and speak English proficiently.\n, • High School Diploma, GED or Industry experience preferred. \n, • Medical Dental, Vision, \n, • Life Insurance, Long-Term Disability \n, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD)\n, • PTO (3 weeks accrued first year!) \n, • 10 Paid Holidays \n, • Flexible Spending Accounts\n, • 401(k) with matching\n, • Pet Insurance\n \n \tFor more information, or to apply now, you must go to the website below. Please DO NOT email your resume to us as we only accept applications through our website.

Manufacturing Engineer Description • Define and solve technical problems in manufacturing, assembly, and testing environments., • Implement cost-saving and process improvement initiatives on assigned product lines., • Collaborate with design engineering teams to enhance manufacturability of products., • Develop efficient production workflows and determine optimal sequencing of operations., • Prepare cost estimates for proposed projects and analyze cost factors., • Support facility layouts for manufacturing processes and equipment as needed., • Solve manufacturing challenges of varying complexity., • Design tools, fixtures, and gauges using SolidWorks or similar to improve manufacturing processes and address safety concerns., • 3D printing of fixtures., • Create detailed assembly work instructions using Microsoft Power Point., • Program laser printers and develop operator instructions for laser printing processes., • Utilize RTX-Lifecycle-Program-Management (RLPM) for New Product Introduction projects (NPI) to develop build plans for new designs., • Develop and maintain production routers and bill of materials., • Collaborate with quality and suppliers to resolve quality and technical issues., • Conduct compliance reviews to ensure conformance with customer specifications and requirements., • Support the project pipeline process to select, prioritize and scope projects to increase First Pass Yield and throughput across the value stream, • Support the project pipeline process to select, prioritize and scope projects to business objectives, integrated with other continuous improvement activities and CORE initiatives. This is a Contract position based out of Bohemia, NY. Pay and Benefits The pay range for this position is $45.00 - $65.00/hr. Eligibility requirements apply to some benefits and may depend on your job\n classification and length of employment. Benefits are subject to change and may be\n subject to specific elections, plan, or program terms. If eligible, the benefits\n available for this temporary role may include the following:\n\n • Medical, dental & vision\n, • Critical Illness, Accident, and Hospital\n, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available\n, • Life Insurance (Voluntary Life & AD&D for the employee and dependents)\n, • Short and long-term disability\n, • Health Spending Account (HSA)\n, • Transportation benefits\n, • Employee Assistance Program\n

EnerSys Advanced Systems (EAS) is a specialized division of EnerSys-a global leader in stored energy solutions for industrial applications. EAS focuses on cutting-edge energy solutions for the aerospace, defense, and medical industries. As we continue to grow, we're looking for individuals who share a passion for these industries and want to be part of an innovative, dynamic team. Certain positions at EnerSys Advanced Systems require access to information or technology that is subject to the International Traffic in Arms Regulations (ITAR) and other U.S. government security regulations. Candidates for these positions should be a "U.S. Person" under ITAR (U.S. citizen, lawful permanent resident, or a refugee/asylee) and/or otherwise comply with ITAR requirements for access rights to be considered for a position. What We Offer: • \nGenerous Time Off - 3+ weeks of paid time off, plus 11 paid holidays, • \nComprehensive Benefits - Medical, dental, and vision coverage for employees and dependents at a discounted rate, • \nFinancial & Career Growth - Life insurance, short-term disability, educational reimbursement, flexible spending accounts, and an employee stock purchase plan, • \n401(k) Matching - 100% match at a 6% contribution level, • \nInnovative Culture - We value excellence, teamwork, and long-term relationships with stakeholders, colleagues, and customers. Through innovative technology and ongoing training, we invest in our employees' skills and career development.At EAS, we don't just build batteries - we power systems and devices that protect not only individual citizens but communities across the world. If you're excited about working in an innovative, fast-paced, high-tech environment, where your contributions make a real impact, we'd love to hear from you! Compensation Range: $75,000 to $90,000 per year. Compensation may vary based on applicant's work experience, education level, skill set. Learn More About EAS Job Purpose The Manufacturing Engineer at Bren-Tronics, part of EnerSys is responsible for supporting production operations through process implementation and improvement, documentation, equipment optimization, and ensuring product quality and safety. This role works closely with operations, quality, engineering, and supply chain teams to improve efficiency, reduce waste, and maintain compliance with internal and external standards. Essential Duties and Responsibilities • Develop, optimize, and maintain manufacturing processes to improve efficiency, quality, and throughput., • Support day to day production activities by troubleshooting process issues and providing technical guidance., • Function as liaison between Manufacturing and Engineering to smoothly transition newly designed products to production., • Create and update work instructions, process documentation, and standard operating procedures., • Provide training to production operators to fully comply with work instructions, quality standards and engineering requirements, as needed., • Lead and support continuous improvement initiatives, including lean manufacturing and root cause analysis activities., • Design and implement tooling, fixtures, and equipment improvements to enhance production capability and operator safety., • Analyze production data to identify trends, process bottlenecks, and improvement opportunities., • Monitor rework and repair operations, consistently monitor and report yield issues, and regularly highlight significant findings., • Conduct failure analysis, identify root causes, and pursue effective solutions to minimize in-process defects., • Support equipment maintenance, calibration, and layout planning for efficient workflow., • 3+ years in Manufacturing Engineering role, defense Manufacturing industry, strongly preferred., • Bachelor's degree in Manufacturing Engineering, Mechanical Engineering, Industrial Engineering, or related field., • Understanding of lean manufacturing principles, quality systems, and process control., • Strong teamwork and collaboration with various groups both internal and external., • Excellent communication, written and verbal skills with cross functional teams., • Strong problem solving skills and ability to lead root cause and corrective action efforts. Know Your Rights Know Your Rights (Spanish) We use artificial intelligence to screen, assess and select applicants for open positions, including for the purposes of reviewing and ranking application materials and scoring answers to application questions. Accordingly, decisions about your application and eligibility for employment with EnerSys may be made based exclusively on the automated processing of the personal information that you submit in your application materials. Nearest Major Market: Long Island Nearest Secondary Market: New York CIty

NOTICE: The posting for local applicants only - is not for those applying for a global assignment and/or for employees working outside of Cipla's U.S. Subsidiaries or Affiliates Job Title PLC/Electrical Automation Engineer Organization Name InvaGen Pharmaceuticals, Inc. Location Hauppauge, NY Employment Type Full Time - Exempt Salary Range (Base/salary) $72,800 - 93,600 Annual Salary Benefits In addition to a fulfilling career and competitive salary, the Company offers a comprehensive benefits package to include a 401(k) savings plan and matching, health insurance - medical/dental/vision, health savings account (HSA), flexible spending account (FSA), paid time off (PTO) - vacation/sick/flex time, paid holidays, short-term disability (STD), long-term disability (LTD), parental leave, paid family leave, employee discounts, and other benefits. Work Hours/ Shift/ Remote General 8:30 am-5:00 pm Responsibilities/ Accountabilities • Manage all phases of electrical and control equipment throughout the plant. This includes preventive, corrective, emergency, warranty service, etc., • Diagnose and solve electrical problems for manufacturing and packaging equipment and systems., • Install, service, calibrate, and update electrical systems., • Repair and/or replace faulty electrical parts in manufacturing and packaging equipment., • Conduct inspections to ensure that products or systems are in a safe and usable condition., • Troubleshoot programmable logic controllers (PLC)/industrial programmable controllers (IPC)., • Assess building systems to plan work assignments and project schedules., • Develop maintenance procedures and schedules., • Ensure equipment maintenance and repair work are completed correctly and in a timely manner., • Plan and perform PMP for equipment and facilities. Education Qualifications/Experience • Bachelor's degree in electrical engineering or related field of study from an accredited institution with a preferred minimum of five (5) years of relevant work experience in an industrial / manufacturing setting., • Master's degree in electrical engineering or related field of study from an accredited institution with a minimum of three (3) years of relevant work experience in an industrial / manufacturing setting preferred., • Experience working in pharmaceutical manufacturing preferred. Skills/ Competencies • In-depth understanding of electronics, electrical systems, and mechanical engineering principles., • Advanced working knowledge of Microsoft Office Suite, AutoCAD and of computer operations in general., • Familiarity with Programmable Logic Controllers and Distributive Control Systems., • Ability to read electrical prints., • Ability to read P&IDs., • Ability to trouble shoot OMRON PLC hardware., • Ability to trouble shoot OMRON PLC logic utilizing OMRON software., • Ability to trouble shoot Allen Bradly PLC hardware., • Ability to trouble shoot Allen Bradley PLC logic utilizing Allen Bradley, • Working knowledge of 480V and 4160V electrical switchgear, motors, and starters., • Experience working from complex drawings and data, manuals, handbooks., • Experience using a wide variety of measuring instruments and electronic analyzing and testing equipment., • Thorough knowledge of electronic components, digital and analog circuitry, hydraulic systems, and machine tool principles essential., • Knowledge of GMP and various regulatory requirements., • Strong leadership skills and experience in industrial automation., • Ability to lead teams and facilitate the execution and completion of work., • Communicate effectively (verbal, written, presentation skills) in the English language., • Contribute and work collaboratively with geographically dispersed teams in HR and across other functional departments., • Apply practical knowledge of job area typically obtained through advanced education and work experience., • Work independently with general supervision., • Influence others within the job area through explanation of facts, policies, and practices., • Keen attention to details and must demonstrate use of good judgement and decision-making., • Excellent analytical, critical thinking, and problem-solving skills. Physical Requirements • Able to lift fifteen (15) pounds with or without assistance., • Able to frequently stand, bend, walk, sit, climb, balance, stoop or crouch, kneel, reach, push, pull, grasp, feel, talk, write, type, listen and hear., • Must be willing to work any shift or site as required., • Must be able to travel domestically and internationally as needed (less than 20%)., • Able to be able to wear personal protective equipment (PPE) such as hard hat, hair net, safety shoes, glasses, lab coat, and other required gear. About Cipla Cipla is a leading global pharmaceutical company, dedicated to high-quality, branded, and generic medicines. We are trusted by healthcare professionals and patients across geographies. Over the last eight decades, we have strengthened our leadership in India's pharmaceutical industry and fortified our promise of strengthening our global focus by consolidating and deepening our presence in the key markets of India, South Africa, the U.S., and other economies of the emerging world. Driven by the purpose 'Caring for Life', Cipla's focus has always been on making affordable, world-class medicines with a reputation for uncompromising quality standards across the world. In the last 85 + years, Cipla has emerged as one of the most respected pharmaceutical names in India as well as across more than 100 countries. Cipla is a fast-growing pharmaceutical company with a continued focus on the expanse of our strong legacy. Over the last five years, Cipla has significantly expanded its portfolio and presence in the U.S. with both a generic and brand division. InvaGen Pharmaceuticals, Inc. InvaGen Pharmaceuticals is a Cipla subsidiary engaged in the development, manufacture, marketing, and distribution of generic prescription medicines with focus on a range of therapeutic areas, including cardiovascular, anti-infective, CNS, anti-inflammatory, anti-diabetic, and anti-depressants. The company was founded in 2003 and is based in Central Islip and Hauppauge, New York. In October 2020, InvaGen established its project site in Fall River, Massachusetts to support the launch of Cipla's respiratory business in the United States. Equal Opportunity Employer Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status. At Cipla, we welcome people of all abilities and want to ensure that our hiring and interview process meets the needs of all applicants. If you require reasonable accommodation to make your application or interview experience a great one, please contact the recruiter. About the Salary/ Pay Range: The salary range mentioned above is an anticipated base salary range for this position. Exact salary depends on several factors such as experience, skills, education, and budget. Salary range may vary based on geographic location. In addition to base salary, this position may be eligible for benefits and participation in a bonus program based on performance and company results.

The NPI Engineer develop solutions for product assembly, resolve product design/manufacturing challenges, and support new product introduction through the transition to production (TTP) process. Provides manufacturing engineering support for all activities in product development process. Focusing on

Job Description Are you ready to join an award-winning MSP recognized as one of the best places to work on Long Island? Techworks Consulting is seeking a talented and driven Solutions Engineer to support both new sales and account management teams in designing solutions, scoping projects, developing proposals, and ensuring technical accuracy during the sales process. If you thrive in a dynamic, hands-on environment, this on-site role in Ronkonkoma, NY could be the perfect opportunity for you! We'll Provide: • Robust benefits package including health insurance, dental, 401K, PTO, and holidays, • Salary range of $75,000-$95,000, • Opportunities for continued growth and learning, • Conduct technical discovery sessions for prospects and existing clients, • Create statements of work, project scopes, and bills of materials, • Present technical solutions when necessary, in a client-fiendly, business-focused manner, • Participate in sales calls and strategic planning meetings, • Moderate technical foundation in Microsoft 365, Azure, networking, cybersecurity, and virtualization, • Experience scoping technical projects, creating SOWs/BOMs, and presenting technical solutions, • Ability to explain complex technology in an easy to understand way, • Excellent communication, organization, and documentation skills, • Professional demeanor and ability to hold conversations with executive level decision makers Quick apply with your resume here OR Get a head start on our application and aptitude testing process here:

Job DescriptionElectrical Design Engineer - CPU & DDR Board Design Job Title: Electrical Design Engineer - CPU & DDR Board Design Location: Bohemia, NY on-site Salary: $80k-$140k /yr depending on experience Requirements: BSEE or higher, 3+ yrs exp in Electrical Design, Circuit Design involving CPU's, microprosessors, DDR memory, oscilloscopes Position Overview We are seeking an experienced Electrical Design Engineer specializing in Circuit Design with CPU and DDR Board design to join our innovative team. The ideal candidate will be responsible for designing and implementing electrical circuits for a variety of applications, ensuring they meet specifications and standards. Key Responsibilities • Design and develop electrical circuit schematics and layouts., • Conduct simulations and analysis of circuit designs using industry-standard software., • Collaborate with cross-functional teams to integrate circuit designs into larger systems., • Perform testing and validation of electrical designs to ensure functionality and reliability., • Troubleshoot and debug circuit issues as they arise during development and production., • Prepare documentation for designs, including specifications, test plans, and reports., • Bachelor's degree in Electrical Engineering or a related field., • Proven experience in circuit design and development., • Strong understanding of electrical engineering principles and practices., • Proficiency with oscilloscopes and other electrical testing apparatus., • Familiarity with PCB design and schematic capture tools is a plus., • Experience in analog and digital electronics design., • Knowledge of simulation software such as Spice, VHDL, or Verilog is desirable., • Competitive Salary depending on experience, • Annual bonus (prorated in the first year), • Medical, dental, and vision coverage, • 401(k) plan with company match, • Paid Vacation: 2 weeks to start (prorated in the first year), • 9/80 summer schedule (discretionary), • Paid winter break, • Amazing company culture, • Career Growth, • and more! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/24/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Job Summary The Design Engineer 3 is a senior level engineer who provides engineering support on systems, system elements, interfacing systems, components, devices and/or processes. Possesses broad knowledge of industry practices, standards, and technology areas. Works as either technical or programmatic lead of a team and assists with solving complex problems in an engineering discipline. Develops strategic and implementation plans. Essential Functions • Works on multiple highly complex major projects requiring innovative, original solutions, • May plan multiple projects simultaneously. Estimates, tracks & completes project on time and within budget., • Subject Matter Expert in at least one area or system., • Strong technical, proposal and report writing skills with ability to collect or generate all necessary backup material., • Exercises considerable latitude and technical judgment in deciding work methods., • Can lead a group of engineers and technicians, responsible for budget and manpower estimates., • Develops innovative solutions to unique problems., • Works mostly independently with minimal supervision., • Exercises substantial initiative/ judgment in work methods and in interpreting goals., • Able to give effective presentations to critical/high level customers., • Knowledgeable in all technical areas of the group's scope or having a demonstrated ability to achieve that level of proficiency in a short period of time., • Responsible for large and fairly complex projects., • Ability to work well with and mentor both high and low performers in a team or group environment, setting expectations, and providing input and feedback in a helpful way that fosters accountability. Ability to deal with personnel problems in a constructive manner., • Proven leadership skills. Identifies problems and actively devises appropriate solutions., • U.S. Citizenship Required., • BSME or equivalent educational degree required., • Minimum six (6) years or demonstrated capability in an Engineering role, experience within a manufacturing environment and aerospace industry preferred., • Strong knowledge of AS9100 and ISO requirements., • Ability to read, write, and speak in English proficiently., • Strong work ethic; can work independently or in a group., • Highly professional with excellent telephone etiquette., • Medical Dental, Vision,, • Life Insurance, Long-Term Disability, • Aflac Voluntary benefits (Critical Illness, Accident, Hospital, STD), • PTO (3 weeks accrued first year!), • 10 Paid Holidays, • Flexible Spending Accounts, • 401(k) with matching, • Pet Insurance Reports To: Engineering Manager FLSA Classification: Exempt Job Type: Full time EOE/Disability/Veteran EAST/WEST INDUSTRIES INC. is a woman-owned small business located in Ronkonkoma, NY. We are a world leader in the development and production of aircraft seats and life support systems for high-performance military aircraft, and ground support equipment for servicing such aircraft. Job Posted by ApplicantPro

Job DescriptionJob Summary: The RF Engineer applies principles of RF/Electrical Engineering to solve complex technical challenges in research, development, and manufacturing environments. The role focuses on the design, development, testing, and production of RF Power Amplifier devices and systems, providing solutions to both routine and complex engineering issues under general supervision. Key Responsibilities: • Evaluate and test RF circuits, systems, and modules to meet specifications; modify as needed to achieve performance goals, • Conduct Acceptance Test Procedures (ATPs) on complete RF Power Amplifier Systems, • Develop and prototype new RF power amplifier gain stages, ensuring compliance with high-performance specifications, • Collaborate with engineering and manufacturing teams to ensure accurate data transfer and process control during product transition to manufacturing, • Design and develop next-generation RF systems specifically tailored for defense and medical applications in the IMHZ-2GHZ range, • Provide technical support and coordination to facilitate product development, manufacturing, and the transition of new designs into production, • Assist in preparing technical bids and proposals; occasionally attend customer design reviews and field-testing activitiesQualifications: Education: • Bachelor’s degree in Electrical Engineering (BSEE), Mechanical Engineering, Applied Science, or equivalent experience without a degreeExperience:, • 3–5 years of experience in microwave/RF design and developmentTechnical Skills:, • Proficiency in RF/microwave design and PCB layout, • Hands-on experience with testing, tuning, and modifying RF circuits, • Familiarity with CAD and simulation tools (ADS, HFSS, AutoCAD, PADS is a plus), • Skilled in using RF test equipment such as network analyzers, spectrum analyzers, power meters, and oscilloscopes Specialized Knowledge:, • Experience in high-power solid-state amplifier design, • Familiarity with both packaged surface mount components and bare die technologies, • Experience with circuits operating up to 2GHZPreferred Qualifications:, • Proven experience in designing high-power solid-state RF amplifiers, • Knowledge of advanced simulation tools and RF design techniques, • Willingness and ability to travel occasionally for customer support and field service

Job Description iRocket is building the future of reusable launch via advanced manufacturing. We seek an Additive Manufacturing Engineer to lead the design, process development, and qualification of additively-manufactured rocket hardware. The Role • Develop, qualify, and produce additive-manufactured (AM) metal parts for propulsion, structures, and subsystems., • Optimize AM designs: design for additive manufacturing (DfAM), thermal-mechanical analysis, post-process workflows, non-destructive inspection, and certification., • Collaborate with materials, structures, manufacturing, and design teams to reduce cost, lead time, and improve performance., • Set process controls, parameter development, build-book documentation, qualification plans, and manufacturing readiness., • Bachelor’s degree in Materials, Mechanical, or Aerospace Engineering., • 2+ years of experience in metal additive manufacturing, preferably in aerospace, defense, or complex systems manufacturing., • Experience with DfAM, CAD/CAE, thermal/structural analysis, post-processing, inspection, and qualification workflows., • Familiarity with powder-bed fusion, directed-energy deposition, hot isostatic pressing (HIP), heat treatments, and AM part certification., • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Test Engineer - Level III • US Citizenship is required for this role * If you're ready for the challenge of working for a dynamic organization, Dayton T. Brown, Inc. has a career opportunity available for a hands-on Test Engineer-Level III to join our growing Engineering and Test Division. Our three divisions, Engineering and Test, Technical Services, and Mission Systems, make DTB a diverse and interesting place to work. Dayton T. Brown, Inc. is a premier leader as an independent testing laboratory providing testing and engineering services. We support customers across all platforms and services in the military, aerospace, shipboard, railway, weapons manufacturing, automotive, and consumer industries worldwide. The ideal candidate will be able to hit the ground running, must take a hands-on approach to their work, be flexible in their duties, and be a proven self-starter. Responsibilities include, but are not limited to: DTB is looking for a Dedicated and detail-oriented Test Engineer with over 5 years of experience managing large-scale testing programs with a focus on static and fatigue testing. Proven expertise in hydraulic actuator/servo systems, project management, and troubleshooting complex testing challenges. Strong communicator with a track record of building lasting customer relationships and driving efficiency in fast-paced environments. • Budget and Risk Management, • Static and fatigue testing Expertise, • Hydraulic actuator/servo experience a plus, • Can multi-task and manage numerous programs at the same time, • Strong critical thinking skills to efficiently plan and direct test programs, as well as mitigate risks, • Be able to troubleshoot problems creatively and think outside the box, • Excellent verbal communication skills required for customer correspondence and working with peers, • Engineering and project management background., • Build and maintain long lasting relationships with customers, • Promote continuous improvement and be process driven The ideal candidate will need to be successful in this position: Preferred Qualifications: • Ability to obtain Secret clearance, • Ability to work overtime to meet deadlines, including nights and weekends, as necessary, • Engineering design experience a plus, • PMP certification (or in process) a plus, • Motivated to learn new challenges, • Strong attention to detail, • 4 yr. bachelor's degree in an Engineering field REQUIRED, • 5+ years testing experience REQUIRED, • US Citizenship is required. As a Dayton T. Brown employee, you can expect a fun working environment that provides security and career advancement, and so much more such as: • Tuition reimbursement, • A stable, successful organization, • Innovative work environment, • Advancement potential, • Private medical, vision, and dental insurance, • Profit sharing, 401K with company match!, • Work/Life balance and family values. Dayton T. Brown, Inc. Dayton T. Brown, Inc. is an equal opportunity employer - Veterans and Disabled. Job Posted by ApplicantPro

Job Description$104,400 - $150,000/year + bonus 1st Shift Permanent (Full Time) SUMMARY: A Senior Electrical Design Engineer who analyzes, designs, prototypes, tests, and supports complex analog and digital components, subsystems, and systems. You will develop new product capabilities and improve core products by applying engineering principles, producing robust, requirements-based designs, and supporting products through the full development lifecycle. Typical projects are diverse and technically challenging and will grow your domain expertise and organizational knowledge. Works within engineering and cross-functional teams within and/or across the business unit or division. May have regular customer/supplier interaction. PRIMARY FUNCTIONS: • Develops complex conceptual and detailed Analog and Digital designs by analyzing product performance and customer requirements., • Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Experience with microprocessor/microcontroller-based designs which include RAM, FLASH, ADCs, DACs, Supervisory ICs, Op-Amps/Signal Processing, Comparators, Serial Interfaces such as I2C, SPI, CAN, ARINC-429, Discrete Input/Output interfaces, etc., • Experience with requirement-based designs and using tools such as DOORS a plus., • Experience utilizing industry standard schematic entry tools such Dx Designer., • Capable of debug and support of new designs, production builds and field related issues., • Familiar with root cause and corrective action investigation tools., • Support product throughout the life cycle of development, including developing test procedures that ensure proper implementation of requirements., • Prepare for and conducts design reviews and various milestones throughout the product life cycle., • Develops complex conceptual and detailed design specifications by analyzing product performance and customer requirements. Investigates design factors such as function, performance, interchangeability, non-recurring and recurring cost, operational efficiency, and contractual requirements. Performs diverse and complex product development, modification, and evaluation of components, subsystems, and systems by applying engineering principles and developing new or unique analysis tools as required., • Applies scientific analysis and mathematical models to predict and measure the outcome and consequence of design alternatives. Interprets and validates test results for accuracy and precision. Oversees and monitors product acceptance procedures and parameters to achieve customer and product reliability and safety standards (e.g. failure analysis). Utilizes and interprets predictive models to simulate and verify design concepts., • Completes technical project elements (e.g. preparation of product or system layout; defining system architecture; etc.) as assigned. Develops critical data and analysis necessary to present technical product and/or system proposals to customers., • Contributes to the completion milestones associated with specific projects (e.g. create functional diagrams and system layouts; review detailed drawings and schematics; research customer data item requirements). Maintain efforts within defined cost and schedule constraints, including statusing and root cause/corrective actions of associated variances., • Reviews product specifications and/or modifications to ensure clarity, completeness, form, fit, function, and conformity to standards and procedures. Troubleshoots design errors, omissions, and other deficiencies, and recommends revisions, engineering change orders, and improvements to engineering management or the project team., • Provides technical information for review with product engineering teams applying consistent engineering practices, standards, and documentation methods (e.g. structured design process; customer design reviews). Writes supporting documentation for procedures and technical reports., • Conducts complex analysis and devises tests to validate performance in the development of new products, methods, materials or processes. Completes required documentation, generates detailed reports, creates customer proposals and presentations and/or change proposals. Determines required actions, performs or directs completion of tasks, and publishes findings and/or results., • Compiles and analyzes operation, test, and research data, develop acceptance, engineering evaluation, development and qualification/certification test plans, procedures, and reports., • May communicate with customers to identify new business opportunities, present Parker product capabilities, and clarify customers’ technical requirements. May write technical proposals for customers by reviewing and interpreting specifications and requirements., • Mentors or serves as a resource to share specialized knowledge with others. Establishes goals and objectives and tracks performance required to complete projects., • Bachelor’s degree (BS) (or Professional Engineer (PE) certificate) in Electrical Engineering. Master’s degree (MS) preferred., • Demonstrated ability to perform the essential functions of the job typically acquired through 7-9 years of related experience., • Has thorough in-depth knowledge of engineering domain principles, concepts, product standards, and techniques, industry practices, regulations, and policies. Ability to apply broad knowledge of other related engineering areas to area of expertise., • Demonstrated ability to investigate and implement new technologies., • Proficient with engineering design and analysis tools (e.g. DX Designer, PSpice/LTspice); ability to use standard software packages. May require capability using specialized software applications or languages., • Ability to establish individual objectives to complete projects and provide status to the team at project milestones. Ability to effectively influence the overall team and functional objectives., • Ability to effectively communicate and present status, actions, recommendations, and other technical information with clarity and precision. Ability to respond to significant inquiries from customers, regulatory agencies, or marketing/sales teams.

Job Description Mechanical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for documenting and supporting the research, design, development and diagnosis integrated x-ray sources and high voltage generators within a manufacturing environment. Job Description: • Responsible for creating and maintaining Mechanical Engineering Change Notices, • Create and modify concept drawings, detailed design, assembly and fabrication drawings; BOMs and other related design documentation, • Work with cross-functional team to design and develop new products and improve existing designs, • Generate 2D and 3D designs using SolidWorks, • Create and properly document detailed drawings complying with metric standards, • Create, maintain and share process documentation in ERP system and SharePoint, • Regular communication with other engineering disciplines, the sales and production teams, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree or higher in Mechanical Engineering, • One internship or limited experience in a manufacturing environment, • Familiarity with manufacturing processes and mechanical components, • Proficiency in reading and interpreting detailed mechanical drawings, • Superior written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Demonstrated working knowledge of SolidWorks or similar software, • Proficient in Microsoft Office Suite, • Experience in electro-mechanical design, • Minimum 2 years of mechanical design experience, • Experience working with ERP systems, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required.On a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels

Job Description iRocket (Innovative Rocket Technologies Inc.) is pioneering fully autonomous, fully reusable small launch vehicles for responsive access to space. We leverage cutting-edge propulsion, reuse, and sustainable propellant technologies to make launch more frequent, lower cost, and eco-friendly. We are headquartered in New Hyde Park, NY. The Role As a Machining & Manufacturing Engineer at iRocket, you will own the development, optimization, and scaling of high-precision manufacturing processes for rocket hardware. You will work cross-functionally with design, test, supply chain, and quality teams to mature processes from prototype through production. You will report to the Senior Manager of Manufacturing Engineering. • Develop, validate, and refine machining processes (CNC turning, milling, EDM, grinding, etc.) for rocket components, • Collaborate with design engineers to ensure manufacturability, offer design for manufacturing (DFM) feedback, and propose design changes where beneficial, • Create and maintain manufacturing BOMs, process flows, work instructions, and SOPs, • Support installation, calibration, qualification, and commissioning of new machines and tooling, • Lead root cause analysis (RCA) for production issues and drive corrective and preventive actions, • Implement process controls, error-proofing, statistical monitoring, and quality gates, • Participate in manufacturability reviews and design reviews to provide input from a manufacturing perspective, • Document and drive continuous improvement in process maturity, standardization, and scaling, • Support aerospace / defense compliance efforts (e.g. AS9100, aerospace quality standards), • Occasionally support mission-critical deadlines which may require non-standard hours Requirements • Bachelor’s degree in Mechanical Engineering, Manufacturing Engineering, or a related discipline, • 3+ years of experience in machining / manufacturing engineering in aerospace, defense, or precision industries, • Strong knowledge of GD&T, tolerancing, fixtures, tooling, materials, machining best practices, • Hands-on experience developing machining processes, tooling, fixturing, • Proficiency in reading engineering drawings, specifications, and technical documentation, • Ability to work cross-functionally, strong problem solving, and data analysis skills, • Excellent communication skills (verbal and written), • Master’s degree in Mechanical or Manufacturing Engineering, • Experience with aerospace quality systems (AS9100, NADCAP, etc.), • Familiarity with additive manufacturing, welding, exotic materials, or hybrid manufacturing methods, • Experience with lean manufacturing, continuous improvement methodologies (Six Sigma, Kaizen), • Proficiency in CAD/CAM or manufacturing software (e.g. NX, SolidWorks, Mastercam, etc.), • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer’s mission critical needs, PDC is seeking an Senior Electrical Engineer – Analog/Digital to join our respected and valued team. In this role, you will be responsible for supporting the Business Unit Team in designing, maintaining, and validating firmware for PDC’s industry-leading portfolio of Power Distribution, Power Generation and Motor Control products. Your expertise will be vital in providing technical support to customers, developing new product ideas, supporting product roadmaps and working with the Business Unit Team and Engineering Teams in responding to customer proposals. This role is 100% on-site in our Bohemia, NY office. The compensation range for this role is $120,000 to $160,000. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. *We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Job Qualifications - Education/Experience • Bachelor’s degree in Electrical Engineering is required. Graduate degree desirable., • Seven (7) to ten (10) years of experience in Analog and Digital Circuit design, which includes analog to digital conversion, processor/microcontroller, I/O communications and discrete I/Os., • Experience in power electronics design, thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis and EMI analysis., • Experience with Power devices Mosfet, IGBT, SiC and GaN., • Familiarity with MIL-STD-1275/704 and DO-160 DC and AC input power specifications, familiarity with DC/DC converters., • Experienced in PWB layout techniques for determining current density requirements and voltage breakdown requirements in power distribution systems. Layout techniques for passing MIL-STD-461 and DO-160 EMI requirements., • Familiarity with multiple communication protocols including CAN, RS232/422/485, SPI, JTAG, PCI, PCIe, 1G/10G Ethernet., • Experience in space level radiation hardness, ionizing radiation, single event upset and total dose analysis for component selection, • Experience with CAD tools such as LT-Spice, P-Spice, OrCAD, Mozaix, Allegro and Pantheon are desirable, • Experience with Motor control simulation including Matlab Simulink or equivalent., • Control theory and Matrix mathematics including Z domain transform for digital control., • A/D conversion and sensor knowledge including LVDT, Resolvers and Encoders., • Clark and Park transform theory Primary/Essential Duties: • Provide technical leadership to lead engineering projects/team through all phases of the product life cycle from requirements, conceptual development and detail design, verification through qualification, manufacturing transition and production support., • Develop clearly written requirements and design specifications from a marketing or customer requirement document., • Perform original and innovative analog and digital hardware design and distill large scale designs into architectural elements. Generate design reports and present findings to the team – e.g., at design reviews. Facilitate the design of products by coordinating engineering teams of varied technical disciplines through clearly documented design documents. Co-ordinate technical meetings and reviews with other groups., • Develop creative approaches that favorably optimize complex design tradeoffs for various elements of a design such as product cost, performance, feature set, time to market, and technical risk., • Conceive methods for achieving product requirements and specifications using appropriate circuit design, process, manufacturing and mechanical techniques. Anticipate possible difficulties and develop alternate methods., • Perform thermal analysis, electrical stress analysis, worst case analysis, FMEA analysis, tolerance analysis, aging analysis, EMI analysis, simulations, and design verification to ensure that the designs meet the requirements of harsh environments for the applications., • Develop plans, budgets, schedules, and identify resources required to develop products from market requirement through product release. Identify risk areas and develop contingency plans to eliminate or mitigate risk that could result in schedule delays or failure to meet specification or design plan requirements., • Mentor, coach, and train engineers to facilitate their ability to progress to higher levels of technical and professional achievement., • Contribute technical input to proposals, as well as material and labor cost estimates in support of winning tactical business opportunities and proposals., • Provide support for new and legacy products by investigating and resolving issues using tools such as Oscilloscope, Analyzers, DMM, etc., • Work with other departments as appropriate to lead vendor or engineering outsource selection decisions based on uniform technical performance, risk and cost tradeoffs., • Take the initiative to research, develop, propose, evaluate and/or implement new methods, processes, techniques, tools, components, or technology that improve quality, timeliness and/or performance of DDC’s products or the efficiency or cost effectiveness of DDC’s engineering work., • Conduct in-depth technical interviews and make assessments and recommendations that support the hiring of capable and talented technical staff in Engineering Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Description Principal Electrical Engineer Responsibilities: • To take primary technical leadership in the design, management, and support for our motion control product lines:, • Synchro / Resolver to Digital converters, • DATEL A to D, and D to A converters, • Switched-mode multi-phase Brushless DC Motor (BLDC) drivers & controllers, • This role requires a deep understanding of analog / mixed signal circuit analysis and design techniques, to meet demanding dynamic range, EMI, noise and power specifications. The candidate should possess strong technical leadership, in order to drive our interdisciplinary Engineering team through all phases of product life cycle development- from requirements, architecture, and detailed design, through to design validation, device verification, qualification, including support for the handoffs to test and product manufacturing. Our product lines require continuous obsolescence review, with support for alternate part qualification or redesign, to help our military & aerospace customers manage the product life cycle., • Extract clear requirements and specs from marketing inputs, customer documents & meetings., • Engage early with the customer, to guide requirements toward those that yield a more realizable, higher value product., • Distill large-scale designs down to their architectural elements, and develop unique, innovative analog & digital hardware solutions. Consider & pursue patent applications as differentiators to secure our competitive advantage., • Generate reports, present findings & provide continuous feedback to the team throughout the review process- good communication is essential., • Develop creative approaches that favorably optimize complex design tradeoffs for: product cost, performance, feature set, time to market, and technical risk., • Follow a defined design process, coordinating technical reviews with the associated disciplines to facilitate good DFM outcomes in terms of yields, cost and performance., • Manage support and verification activities (thermal, electrical stress, worst-case, FMEA, tolerance, aging, and EMI analyses, performance simulations, and design verification) to ensure all requirements are met for the intended application., • Develop project plans, budgets, schedules; identify the resources required to get from market requirement to product release. Identify risks and develop contingency plans to mitigate schedule / technical threats to the program., • Provide technical guidance, including material and labor cost estimates to support winning tactical business opportunities and proposals., • Mentor, coach, and train engineers to greater levels of technical and professional achievement., • Adopt and support legacy product lines, resolving new vendor materials / product issues as they arise., • Investigate new methods, processes, techniques, tools, components, and technologies that may lead to improvements in quality, timeliness, and efficiency., • Conduct in-depth technical interviews and make hiring recommendations to further build out a capable and talented technical Engineering team.Qualifying Experience:, • Bachelor’s degree in Electrical Engineering; Graduate Engineering degree preferred., • Deep bench of Analog Circuit design:, • Multiple A to D architectures (multi-pass SAR, Flash, Sigma Delta, Pipeline) and D to A (serial DACs, R2R, current steering, charge scaling)., • Low noise and high dynamic range techniques, sample acquisition and hold circuits, Bandgap references., • Oscillators, VCO’s, Op-amps, Switched Capacitor Circuits; Active Filters, single ended / common & differential mode circuits. PCB design techniques for low noise, low EMI, and high current., • Type 2 control loops as used in Synchro to digital converters; resolver to synchro transformers, phase / frequency control loops, stability analysis. Comfortable with analysis in both time & frequency domains., • Control theory and Matrix mathematics including Z domain transform for digital control; Clark and Park transform theory., • Sensors / detectors- inductive, Hall, optical, LVDT, Synchro / Resolvers and Encoders., • Proficient with CAD tools such as LT-Spice, P-Spice, OrCAD, Allegro and Pantheon., • Analog / mixed signal ASIC design and verification using Cadence, Synopsis, or Siemens tool suites a plus., • Power electronics / power management (Buck/Boost, LDO, Charge Pump, Inverters using MOSFET, IGBT, SiC and GaN devices)., • Motor control system simulation, • Space-level radiation hardened design for analog and digital circuits- rad lot testing, ionizing radiation, single event upset and total dose analysis regarding component selection., • High level understanding of thermal, electrical stress, worst case, FMEA, tolerance, aging, and design for low EMI.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro

Job DescriptionHardware Design Engineer FPGA/Analog Job Title: Hardware Design Engineer - FPGA/Analog Location: Suffolk County, NY on-site Salary: $85k-$140k DOE Requirements: BSEE or related degree, 3+ years experience in Mixed Signal Embedded HW design, PCB, FPGA/VHDL development Position Overview We are seeking a talented Hardware Design Engineer with a strong background in FPGA and Analog design to join our innovative engineering team. The ideal candidate will contribute to the development of cutting-edge hardware solutions, ensuring high performance and reliability in our products. Key Responsibilities • Design and develop PCB layouts for complex electronic systems, • Implement FPGA designs using various hardware description languages such as Verilog and VHDL, • Conduct simulations and timing analysis to validate designs, • Collaborate with cross-functional teams to integrate analog and mixed-signal components into designs, • Debug and troubleshoot hardware issues in prototypes and production units, • Conduct signal processing analysis and optimize circuit designs for performance, • Document designs and create detailed specifications and reports, • BS in Electrical Engineering or a related fieldor related, • 3+years exp in PCB design and layout, Mixed-Signal Embedded Hawdware Design, • Proficiency in FPGA development and design methodologies, • Solid understanding of electrical engineering principles and mixed-signal design, • Experience with Verilog, VHDL, and other hardware description languages, • Familiarity with digital design, synthesis, and simulation tools, • Knowledge of circuit design and signal processing techniques, • Experience with ORCAD, LTSpice, and Vivado is a plus, • Strong problem-solving skills and attention to detail, • Competitive Salary, • Medical/Dental/Vision, • Life and AD&D, • 401(k) with matching, • Vacation, • PTO/Sick Time, • Tution Reimbursement, • Annual Bonus, • Career and Education development, • Schedule Flexibility, • and More! • For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 02/20/2026 and applications will be accepted on an ongoing basis until the position is filled or closed.CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. Our hiring process includes AI screening for keywords and minimum qualifications. Recruiters review all results. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job DescriptionGrass Valley is looking for an experienced Video/Broadcast Engineer to work embedded at one of our major global broadcast customers. The following job description is provided by our customer to describe the person they are looking for. This position will report on a day-to-day basis to the Engineering department of our customer, whose identity will be disclosed during the interview process. Primary Responsibilities This position is responsible for Research, Design, Documentation, Installation, Commissioning and Test of virtualized compressed IP-based video origination and distribution systems, along with related sub-systems for linear and streaming delivery via satellite and terrestrial fiber. • Responsible for end-to-end fulfillment of assigned projects and tasks, including installation, configuration and commissioning of video equipment and software applications., • Coordinates in-house and third-party resources to fulfill system integration tasks for documentation, fabrication and installation., • Experience in the design, build, and commissioning of technical systems for broadcast playout, distribution, and live streaming via IP., • Knowledge of baseband HD/SD video, compressed video/audio encoding, IP transport stream distribution, in-band and out-of-band metadata payloads, OTT streaming architecture, and IP networking principles including multicast., • Proven ability to test and qualify compressed video transport streams and compression technologies at the packet level, including MPEG-4 H.264, HEVC H.265, MPEG-2 and JPEG-2000., • Knowledge and experience in scripting, process automation, data acquisition, measurement and analysis tools, • Familiarity with video encryption and conditional access systems for content protection, broadcast and infrastructure monitoring and control systems, and Ethernet network topologies., • Familiarity with digital Ad Insertion systems, Targeted Advertisement signaling and video industry protocols such as SCTE-104 and SCTE-35., • Familiarity with industry developments in key technical areas of standardization and can articulate benefits/risks of various technology solutions., • Familiarity with Agile project management tools and techniques such as SCRUM and JIRA., • Demonstrates ability to manage assigned projects to tight timelines., • Demonstrates ability to perform technical analysis, exercise judgment, communicate with clarity and influence key technical decisions., • Possesses understanding of the modern video technology landscape including broadcast and streaming media., • Remains grounded in scientific method and objective analysis, representing a disciplined engineering approach at all times. 2PP3RSrd3V

Job Description We are seeking a Quality Engineer to join our team! Responsibilities: • Create and improve automated systems and processes, • Perform first piece inspection, in-process inspection, final inspection, and incoming receiving inspection as required, • Help to Develop Quality Plans for specific jobs as required, • Utilize automated inspection equipment such as Hexagon Global CMM, Keyence Vision System, and Faro Arm to optimize inspection processes., • PC-DMIS programming to improve accuracy and efficiency in Automated quality checks., • Maintain a clean and safe work environment Qualifications: • Previous work experience in quality control., • Familiarity with CAD or other related software, • Strong attention to detail reading blueprints and checking parts to print., • Strong analytical and critical thinking skills, • Excellent written and verbal communication skills, • Knowledge of various inspection equipment such as calipers, micrometers, comparators, etc., • Document all technical procedures and user guides Company DescriptionWe are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.We are a family owned and operated contract precision machine shop. We have been part of the aerospace, defense, semiconductor and scientific instrumentation sectors for over 30 years and continue to grow.

Job Description Position Summary The Manufacturing Engineer will work within the Engineering Department to create and evaluate existing manufacturing processes for vertical and horizontal lathes, and multi-axis milling machines. Responsibilities • Develop cost effective manufacturing process to support 4-5 axis machining centers, • Design cost effective and quick changeover manufacturing fixtures and tooling, • Create shop floor documentation including operation sheets and work instructions, • Implement cost reduction initiatives utilizing Lean Manufacturing techniques, • Initiate corrective actions to floor processes, • Cost estimating and quoting, • Participation in lean and continuous improvement events Qualifications: • Experience with Aerospace materials, • Proficient with Unigraphics NX4-5, CAM and 3D modeling, • Must be accustomed to deadlines and accountability, • Experience with complex aerospace parts including milling and turning processes, • Lean manufacturing techniques, • Effective time management skills including multi-tasking, • Ability to read blueprints. Speak and write reports in English., • High attention to detail., • Develop and follow procedures., • 3+ years experience Job Posted by ApplicantPro Company DescriptionAir Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.Air Industries Group is an Aerospace and Defense Company that has been supplying flight critical and other sophisticated parts and assemblies to Prime Defense and Commercial aerospace manufacturers for over 50 years. We manufacture and assemble structural parts and assemblies that focus on the safety of flight.

Job Description Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Regularly required to sit, walk, bend, stoop and stand within an industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be requiredOn a regular basis, will be required to:, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description Embedded Software Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This role is responsible for developing optimized software to support the prototypes of integrated x-ray sources and high voltage generators. Job Description • Design and create requirement specifications for the Microcontrollers to be used in High Voltage power supply designs, • Test units, integration of firmware and GUI (Graphical User Interface) changes, • Maintain Software Version Control (SVN) and release management systems, • Provide documentation for third party integration into the firmware and customer support to debug software issues, • Program Data Acquisition based GUI’s using serial communication (RS232) and Ethernet Communication (TCP/IP) protocols, • Work with cross-functional team to design and develop new products and improve existing designs, • Follow all VJX and OSHA workplace safety requirements and policies, • Bachelor’s Degree in Electrical and/or Computer Engineering, • Minimum of two (2) years of experience with NI, LabVIEW, Microsoft Visual Studio C++/VB/C#, Embedded C and RTOS, • 2-3 years of experience with Freescale products (MC56F8037 7 ARM) microcontrollers, • Demonstrated ability to write firmware for industrial control equipment, • Ability to work with Analog and Digital Circuits based PCB designs like Op Amps, ADC, DAC & multi-functional IC’s, • Knowledge of RS-232 and TCP/IP communication standards, • Proficient in Microsoft Office Suite, • Perform software development and version control adhering to SCRUM standard, • Proficiency in the English language with well-established written and verbal communication skills, • Must be a highly organized, self-motivated, team player, • Collaboration and creative thinking skills, • Knowledge of radiographic imaging systems for industrial and medical inspection, • Strong background in understanding x-ray tube design of high voltage generators to power up X-ray sources, • Regularly required to sit, walk, bend, stoop and stand within an office or industrial environment, • Will need to repeatedly use hands and fingers to operate basic office equipment and possibly operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone, via email and on other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.