Road jobs in Linden, New Jersey - Page 2Create job alerts

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Competitive salary, • Free uniforms, • Paid time off, • Health insurance, • Read all notes on tickets prior to leaving for the day and make sure you are fully prepared for your route prior to leaving, • Upon arrival to a customers home, ring bell (unless otherwise noted) and announce that you are there today to perform the service, • Vacuum, skim and brush pool each visit, • Empty pump and skimmer baskets each visit, • Backwash as needed and cartridges cleaned as needed, • Inspect pool equipment and report any issues that are not able to be fixed on the visit, • Complete water chemistry check and balance (unless otherwise noted) on each visit, • Complete water analysis report written up on the ticket with notes of what was performed, any issues found and any customer expectations with the second copy left for the customer, • Most importantly, when unsure of something contact the office and speak with In-House Mechanic, • Additional employee documents will be provided to technician to aid in better understanding job duties, • Must adhere to all safety guidelines, • Start time is 7:30 AM and technician is expected to be on the road to their first job site NO LATER than 8:00 AM. Deductions will occur if this is not adhered to, • At least two weeks notice is required for any request for a personal day absence, • Any job change between technicians must be approved by supervisor

Job Description Looking for a GM experienced and trained A level technician to fill positions in a busy shop. We are a single line dealer with a strong customer base. A tech level will include, but not limited to, engine, transmission, and driveline diagnosis and repair. Strong electrical skills a plus. The right candidate will possess good organizational skills along with the ability to get along with co-workers. Pay is negotiable and commensurate upon experience and training. Responsibilities • Receive repair orders from dispatcher and take to stall area., • Perform work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnose cause of any malfunction and perform repair., • Communicate with parts department to obtain needed parts., • Save and tag parts if the job is under warranty or if requested by the customer., • Examine the vehicle to determine if additional safety or service work is required., • Notify service advisor immediately if additional work outlined is not needed or required., • Notify service advisor immediately if repairs cannot be completed within the time promised., • Document work performed., • Road-test vehicles when required or refer to the test technician., • Supervise work of any apprentice technicians as assigned., • 5+ years of GM Technician experience is preferred but not required, • A-level qualifications, including Diagnostic, Electrical and Engine Repair, • One week vacation immediately; two weeks vacation after one year, • 35 hour guarantee, • Paid training, • Sign-on Bonus

Towne U.S. LLC is seeking a travel Physical Therapist for a travel job in Staten Island, New York. • Specialty: Physical Therapist, • Discipline: Therapy, • Start Date: ASAP, • Duration: 13 weeks, • 40 hours per week, • Shift: 8 hours, days, • Employment Type: Travel About the Job: We are seeking a skilled and compassionate Travel Physical Therapist (PT) to join our team for 13-week contract assignments across the country! This is an exciting opportunity to enhance your career, gain experience in diverse clinical settings, and explore new locations—all while making a meaningful impact on patients’ mobility and quality of life. What We Offer: • Competitive weekly pay and comprehensive benefits., • Housing and travel stipends to support your assignments., • Flexibility to explore new locations every 13 weeks., • Evaluate and assess patients to develop individualized treatment plans aimed at improving mobility, strength, and function., • Implement evidence-based physical therapy interventions to assist patients in achieving rehabilitation goals., • Monitor patient progress, adjust treatment plans as needed, and document therapy outcomes., • Collaborate with interdisciplinary teams to ensure comprehensive, patient-centered care., • Educate patients and caregivers on exercises, techniques, and strategies for continued recovery., • Doctor of Physical Therapy (DPT) or Master’s in Physical Therapy (MPT) from an accredited program., • Active PT license in the state of practice or eligibility for licensure in multiple states (licensing assistance provided for travel assignments)., • Minimum of 1 year of clinical experience preferred; new grads with strong skills encouraged to apply., • Ability to adapt quickly to new settings and patient populations., • Strong communication, documentation, and teamwork skills. Towne U.S. LLC Job ID #16802958. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Physical Therapy:Physical Therapist (PT),07:00:00-15:00:00 We’re not just connecting you with jobs, we’re offering you a lifestyle. Imagine a career where you set the destination, and we handle the rest. Whether it’s exploring new cities, making a difference, or earning top-tier pay, we’re here to make your journey unforgettable. Our personalized service ensures you feel supported, valued, and inspired at every step. From your first application to your last day on assignment, you’re not alone—you’re part of the Towne U.S. family. • 401k retirement plan

Senior Counsel, Assistant Vice President of Legal Affairs, Clinical Research & Regulatory Compliance.RWJBarnabas Health Corporate Services.Old Short Hills Road, West Orange, NJ 07052.The above reflects the anticipated annual salary range for this position if hired to work in New Jersey.The compe

Must possess 1 year experience within most recent 3 years, or successful completion of FedEx Freight Driver Development Course. May be required to perform job duties of a city driver or a dock employee where operationally necessary. Must possess a class A Commercial Driver's License (CDL) with doubl

ShopRite - ShopRite of Amboy Road [Retail Clerk / Team Member] As a Grocery Clerk at ShopRite, you'll: Maintain a clean, neat, organized and safe work environment; Clean and sanitize all work surfaces, utensils and equipment; Keep the floor clear of debris and spills; Greet all Customers and provide

ShopRite - ShopRite of Amboy Road [Grocery Clerk / Team Member] As a Produce Clerk at ShopRite, you'll: Greet all Customers and provide them with prompt, courteous service and assistance; Promote for sale any current charitable promotions to Customers; Maintain a clean, neat, organized, and safe wor

ShopRite - ShopRite of Amboy Road [Retail Clerk / Team Member] As a Non-Foods Clerk at ShopRite, you'll: Greet all Customers and provide them with prompt and courteous service; Follow approved procedures for receiving product, storing and restocking; Assist in ordering and maintaining inventory leve

Sincerely thank all customers for shopping at GUESS as they exit the store. Follow GUESS Policies and Procedures 100%. GUESS Factory Accessories, Store 4003, 651 Kapkowski Road, Suite 1470 - Elizabeth, NJ 07201.

Buckle up, hit the open road and start making hungry people happy as a delivery driver for Pizza Hut. That's right, we'll pay you to cruise around in your mobile office - your car - listening to your own tunes and delivering great pizza - and pasta.

Enterprise - JobID: 528538 [Delivery Driver / Local Driver] As a Driver at Enterprise, you'll: Drive and deliver vehicles locally or out of area as needed, following all rules of the road; Deliver customers and vehicles to appropriate destination in a safe and courteous manner; Ride with or follow a

TransAm Trucking Company Truck Driver Jobs.TransAm Trucking is now hiring company CDL-A truck drivers for long-haul career opportunities! Apply today and enjoy life on the road with competitive pay and benefits, top-of-the-line equipment, and plenty of great driver rewards.

Lease – ONLY PAY WHEN YOU DRIVE! No weekly fixed costs Unlock Your Road to Freedom with Artur's Exclusive Lease Program! Imagine a lease where you only pay when you're on the road —no more weekly fixed costs eating into your earnings! With Artur's Lease Program, you enjoy all the perks designed

ShopRite - ShopRite of Amboy Road [Retail Clerk / Team Member] As a Night Crew Clerk at ShopRite, you'll: Follow approved procedures for receiving, code dating, preparing; Unload and secure received product in appropriate storage areas using power or hand jack; Block and face all products in accorda

Category/Area of Expertise: Retail Operations Job Requisition: 304545 Address: USA-NY-Staten Island-4343 Amboy Road Store Code: SS - Store Admin (2502201) At Stop & Shop, we've been serving our customers and neighborhoods while taking care of each other for more than a century.

ShopRite - ShopRite of Amboy Road [Retail Clerk / Team Member] As a Dairy Clerk at ShopRite, you'll: Unload trucks and transport merchandise to Dairy Department that weighs 25 lbs; Stand in designating work area for duration of scheduled shift; Perform all duties to the Dairy operation; Dress and gr

Category/Area of Expertise: Retail Store Positions Job Requisition: 451578 Address: USA-NY-Staten Island-4343 Amboy Road Store Code: SS - Store Admin (2500497) At Stop & Shop, we've been serving our customers and neighborhoods while taking care of each other for more than a century.

CRST The Transportation Solution Inc.We are looking for Premade Teams to drive Over the Road!.Over the Road (all lower 48 states).New Freight Optimization Technology - maximize your miles and pay.Loads are planned a week in advance with an optimization software.Workhound – submit your anonymous fe

Wendy's - 750 OAK TREE ROAD [Restaurant Associate / Team Member] As a Crew Member at Wendy's, you'll: Accomplish many tasks during an action-packed shift; Serve the drive-thru and greet customers; Run the register; Prepare menu items and load stock; Keep the restaurant clean and inviting; Be a star

Steve Madden - 651 Kaplowski Road Space# 2012 [Retail Cashier / Team Member] As a Cashier at Steve Madden, you'll: Apply register procedures to process customer purchases; Accurately and efficiently complete all sales transactions and maintain proper cash accountabilities at POS registers; Reinforce

Hair Stylist/Barber Qualifications:. Join a locally owned Great Clips® salon, the world's largest salon brand, and be one of the GREATS! Whether you're new to the industry or have years behind the chair…great opportunities await!!. The passion to build genuine connections with customers and provi

Marshalls - 1255 Raritan Road Unit B-5, Clark Commons Shopping Center, Clark, NJ 07066, United States of America [Cleaning Technician / Custodian] As a Cleaning Associate at Marshalls, you'll: Supervise maintenance staff; Manage a safe workplace by advocating safety training and accident preparednes

Steve Madden - 651 Kaplowski Road Space# 2012 [ASM / Store Supervisor] As a Store Assistant Manager at Steve Madden, you'll: Assist the Store Manager in all aspects of the daily operations of a retail store; Ensure that each customer receives outstanding customer service; Maintain an awareness of al

Category/Area of Expertise: Retail Operations Job Requisition: 304555 Address: USA-NY-Staten Island-4343 Amboy Road Store Code: SS - Store Admin (2501633) At Stop & Shop, we've been serving our customers and neighborhoods while taking care of each other for more than a century.

Job DescriptionSalary: Evergreen Opportunity: We are continuously accepting applications for this role for potential future openings. We will be reviewing, interviewing and hiring for this role on a rolling basis. About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through aligning their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development". How you'll get to contribute: In this role the CADD Specialist will be responsible for production drawings and as-builts utilizing sketches, diagrams, drawings, and plans. Examples of duties performed include interpreting, compiling, and processing technical engineering data and preparing special reports as requested; researching, assembling, and reviewing road, bridge, and structural data. This position is preferably New Jersey based. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll get to do: * Prepare drawings, layouts, sketches, maps, and graphic representations of engineering designs for preliminary and final plan sets using MicroStation and ProjectWise. * Work closely with engineering teams to ensure coordinated designs. * Apply standard drafting/design principles and theories to complete assignments. * Use technical manuals to ensure compliance with company policies and applicable standards for the New Jersey Turnpike Authority (NJTA). * Understand engineering, architectural documentation and construction, including infrastructure. Who you are: • Required:, • Bridge/Structural design experience., • Demonstrated proficiency in MicroStation (desired minimum of 3-5 years)., • Experience with engineering, architectural, and construction documents (i.e., maps, drawings, technical specifications, etc.)., • Self-directed with the ability to work under pressure to meet deadlines. Ability to multitask and communicate status and progress effectively. * Ability to maintain sensitive and confidential documents and information. * Ability to collaborate effectively with diverse teams. • Effective communication, organizational and time management skills. Attentive to details; able to prioritize and multitask; proactive and detail oriented., • Preferred: New Jersey Turnpike Authority (NJTA) project experience. * A minimum of 3-5 years of experience with Transportation Agencies. * Associate or Bachelor's Degree desired. * Demonstrated GIS (Geographic Information System) experience a plus. • Proficiency in OpenRoads, OpenBridge, ProjectWise, and Bluebeam Revu. Proficiency in Microsoft Office Suite. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month. Companypaid life insurance plan (up to $100,000 per employee). * Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfais an Equal Employment Opportunity Employer.mcfadoes not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in whichmcfamaintains facilities.

Job Description Electrical Consultants, Inc. (ECI) is a leading power engineering consultant firm that provides engineering, system planning and studies, technical consultation, project management, surveying, environmental planning, commissioning/testing and construction services to electric utilities, energy developers and industrials throughout the U.S. Our experience includes system voltages from 4.16 kV through 765 kV. ECI has an opening for a civil engineer. Technical focus will be on structural engineering and/or site (civil) design for substations and power delivery facilities. • Structural engineering responsibilities include development of design criteria, structure design, foundation design, building design, and related works. Structure design primarily consists of standard shape steel structure, specification of tubular steel structures, fire walls, and related facilities. Foundation design primarily consists of drilled pier, shallow/pad, and spread footing foundations. Civil Engineer should possess ability to learn and apply various software design packages such as Visual Analysis, STAAD.Pro, Risa, LPILE, MFAD, and CAISSON. Minimum Requirements: Bachelor of Science or Master's degree in Civil Engineering; excellent verbal and written communication skills; strong organization and planning skills; ability to work in a team environment; commitment to quality and accuracy; and a willingness to meet fast-paced project schedules. A PE license is preferred depending on experience level. The successful applicant must be knowledgeable of applicable codes, standards and design tools. The successful applicant may be subject to client-mandated drug and background checking. Occasional travel/driving is required; therefore, the successful applicant will be subject to ECI's auto insurance carrier requirements. Applicants must not require sponsorship for employment visa status (e.g., H-1B visa status) now or in the future. Salary commensurate with experience and education. Benefits include the following: • Medical, dental and vision insurance, • Flexible spending account, • Health savings account, • Life insurance, • Disability insurance, • 401(k), profit sharing and employee stock ownership plan, • Paid vacation, personal days and holidays, • Paid Parental Leave An Equal Opportunity Employer Job Posted by ApplicantPro

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Road Inspector - NICET Level III or IV or equivalent Reports to: Project Manager/Resident Engineer General Qualities: • Proactive self-starter., • Provides the necessary technical support to the Project Manager/Resident Engineer. Technical Responsibilities: • Possesses strong technical skills; strong computer skills; strong mathematical skills including algebra, geometry, and trigonometry; excellent verbal, written, and interpersonal communication skills., • Inspects the work performed by the contractor related to the construction of the various components of a construction project for conformity with the contract plans and specifications., • Performs mathematical calculations for determining dimensions of construction items and computing daily progress quantities., • Prepares clear, accurate and detailed daily reports properly documenting the contractor's activities in accordance with the contract plans and specifications and the Owner's guidelines and standards., • Verifies that the materials to be incorporated into the project conform to the type, brand, and grade specified in the contract plans and specifications., • Collects samples for laboratory analysis and perform tests as necessary to determine the quality and quantity of materials incorporated into the project., • Collects information related to trainees, wage rates and minority goals for verification of EEO and compliance provisions of the specifications., • Prepares as-built calculations and measurements to properly document project quantities., • Is proficient in software required to complete assigned projects., • Responsive to Client and other KSE Department needs. Administrative Responsibilities: • Familiar with all company policies and procedures and verifies implementation and compliance., • Completes time sheet on a daily basis. Requirements: Educational Requirements: • High School Diploma Experience: • 10 years of Road construction projects (Construction Cost > $10M)., • 2 years on NJDOT projects preferred. Professional Licenses/Registrations: • NICET Certification in Roadway Construction Level 1 through 4 ACI Field Technician., • NJSAT Certification, • OHSA 10, 30 or 40-hour Safety Certification, • TCP (Rutgers CAIT) Professional Development: • Actively participates in professional development and training and licensing. KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate on the basis of race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionSalary: $63,000-$89,000 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for road and bridge inspections. Our ideal candidate will be a highly motivated & qualified individual, with experience in soil testing, quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects.In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and the New York Metro, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. This job requires travel to various job sites within 75 miles of Woodbridge, NJ. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations., • Inspection of testing of soils., • Maintain project records., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Record monitoring well data., • Enter data for Test calculations., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification, • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various job sites within 75 miles of Woodbridge, NJ. Who you are: * • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Geological Engineering, Materials Engineering, Metallurgy Engineering, Structural Engineering, or Transportation Engineering., • Familiar with ASTM, AASHTO and ACI standards for testing and inspections., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, • International Code Council (ICC) - Soil Inspector, • New Jersey DCA Certified, • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey and New York., • US Citizenship; Authorized to work in the United States., • 3+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with gINT software., • NICET I or II certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job Description Doctor Referral Institute- exclusive territory ownership opportunity Doctor Referral Institute (DRI) is offering an exciting opportunity for motivated individuals to become Territory Directors, overseeing sales, business development, and the execution of proven referral systems in their designated markets. This is an opportunity to invest in yourself and build a business within our proven business model. This role combines leadership, strategic planning, and strong sales expertise, particularly in the B2B healthcare industry. We provide full custom CRM, training, learning management software, marketing, team development and strategic planning. There is a large residual income opportunity as we work together to build a team underneath you. There is an initial one-time investment for your territory. Amount depends on the size of your territory. There is no ongoing fees. This is not a W2 job. There is uncapped income potential. Company Description Doctor Referral Institute serves specialty practices in the medical and dental field around the country, providing representation with an experienced team and system to referral sources. Doctor referrals are the #1 marketing strategy for any size healthcare practice to attract new high-quality patients. DRI offers affordable, customized referral systems customized to anyone who is looking to grow the quality of their healthcare practice. Anyone who receives a referral can be a client of ours. Doctor Referral Institute has been the #1 Referral Development company in the country for the last 15 years. Key Highlights of the Role: • Sales & Territory Management: Develop and execute sales strategies, manage outside sales, and utilize tools like Salesforce to track progress and optimize performance., • Team Leadership: Mentor and manage a sales team, while also having the potential to grow your team and generate additional income from their efforts., • Lucrative Income Potential: High commission earnings with residual income opportunities, with potential earnings ranging from $200K-$750K plus per year based on marketing efforts., • Exclusive Territory Ownership: Opportunity to own exclusive territories and grow your income as the company expands nationally., • Experience: A minimum of 3 years in B2B sales, with a background in outside sales or managing territories., • Skills: Strong leadership, sales acumen, and negotiation skills, as well as experience with CRM software like Salesforce. Why work with us? · Aggressive Compensation Model with Residual Income: You would have the opportunity to earn ongoing income from your efforts, including commissions that may grow as your business and marketing expand. · High Closing Percentage: The company has a high closing ratio, our services have a strong appeal to doctors and healthcare providers, making it easier to convert leads into sales. · Lucrative Income: The potential to earn between $200K-$750K plus annually, depending on the effectiveness of your marketing efforts, is substantial. Compensation is performance-based and tied directly to results. · Proven Solution: You’ll be selling a solution with a high return on investment (ROI) for doctors, which can help build trust with clients and make sales easier. · Nationwide Reach: You'll have access to all healthcare facilities, including medical and dental practices, across the U.S. This means broad market potential and the opportunity to sell services to a variety of clients and build your territory. · Turnkey System & Support: Company provides 100% support and training for you and your team, ensuring that you have the tools and resources needed for success. · Growth Opportunities: The company is expanding rapidly and is seeking partners who want to grow with them. This leads to significant career development and income growth as the business expands into new markets. · Leadership Opportunities: You have the ability to build and manage your own team, which provides the chance to earn income from their efforts as well. · Opportunity to sell your territory: Own your own exclusive territories, which could dramatically increase your income. Also allows you to sell your book of business if you so choose to do so down the road. · Comprehensive Marketing Support: The company provides all necessary marketing materials, business cards, email addresses, and access to customized Salesforce CRM, which simplifies the sales process. · Flexible Work Schedule: With options for full-time or part-time work, and a Monday-to-Friday schedule, you can balance this opportunity with other commitments.

Job DescriptionLocation: Plainfield, NJ 07060Date Posted: 08/29/2025Category: Education K12Education: Bachelors Degree Our client is seeking a Certified Special Education Teacher in Plainfield, NJ. Compensation - $50 per hour. Respond with your resume so we can start a conversation about our client's openings! CLIENT'S REQUIRED QUALIFICATIONS: • Bachelor's degree and completion of an approved teacher preparation program., • New Jersey Teacher of Students with Disabilities (TSD) endorsement plus appropriate initial certification., • Strong knowledge of IEP development, instructional strategies, and behavior management. CLIENT'S REQUIRED SKILLS & EXPERIENCE: • Provide individualized and small-group instruction to students with disabilities based on IEP goals., • Develop and adapt lesson plans aligned with state standards and student needs., • Collaborate with general education teachers, support staff, and parents., • Maintain accurate records and progress reports in compliance with NJDOE requirements., • Create a supportive, inclusive, and structured classroom environment. What to expect from Kaleidoscope Education Solutions: • Exceptional compensation, • Compensated weekly, • Flexible schedule that meets your life's balance, • Your own personal connection in our office whenever you need support or have questions!, • Grow professionally by collaborating with experienced & valued therapists., • We are here for you 24/7, • Contracting with Kaleidoscope allows you all of the above and more! KES ADVANTAGES: • Reaching students who may otherwise go without the services they need and deserve., • Establish for maximum scholastic success because of your expertise!, • Develop students' maximum achievement through strong relationships with students and parents., • Instill and reinforce the joy of learning, • Maintain a positive and encouraging classroom environment. About K.E.S. Founded in 1989, Kaleidoscope Education Solutions, Inc. started as a small team of professionals near Philadelphia, Pennsylvania. Since then, our proven results and dedication have produced exponential nationwide company growth. We additionally have offices in Arizona and service locations in Colorado, Delaware, Illinois, Massachusetts, Michigan, New Jersey, New Mexico, Pennsylvania, Texas, Utah, Washington DC, and Wisconsin. Thanks to our clients, parents, and contractors, we now work with teachers and therapists in over 5,000 schools and 700 school districts across the country! Today, Kaleidoscope Education Solutions, Inc. is a nationwide staffing leader in school-based therapy and special education services. We are dedicated to making a positive difference in every student's life. Title: Certified Special Education TeacherClass: Special Education TeacherType: INDEPENDENT CONTRACTOR 1099Ref. No.: 1304526-3BC: #KES301 Company: Kaleidoscope Education SolutionsContract Contact: Contract Submit NJOffice Email: Phone: 888-829-2477 Office Address: 950 E. Haverford Road, Suite 100B, Bryn Mawr, PA 19010 About Us: Kaleidoscope Education Solutions is a referral agency for professionals seeking supplemental K12 education marketplace opportunities. Registering with Kaleidoscope Education Solutions is not a guarantee that opportunities will be available and/or located. All professionals contracting through Kaleidoscope Education Solutions are classified and compensated as self-employed independent contractors.

Job Description JOB DESCRIPTION: • Conduct new driver orientation classes (explanation of pay, fuel card, gate card and terminal facilities), • Process qualified Owner Operators and Company Drivers in Tenstreet hiring platform, • Accept applications and screen driver applicants (pre-qualify), • Communicate and report applicant and new hire information to IMCC, • Coordinate road tests for Limited Experience Driver program, • Assist with all aspects of safety compliance in region, • Employee first report of injury contact for region, • Responsible for ongoing and corrective action driver instruction and training, • Respond to and investigate local IMC accidents/incidents and report to claims services, • IMC random drug/alcohol test notices, • Supervise maintenance, repair, and driver inspection reports for company truck fleet, • Support and attend annual Driver Safety Banquets and Driver appreciation events, • Manage supply levels for driver gear (Safety vests, gauges, ELDs, cords, placards, numbers for trucks), • Install onboard dash cameras and Electronic Log Devices, • New driver ELD training JOB REQUIREMNTS: • Ability to conduct CMV driver safety and operations instruction and training, • Ability and desire to promote IMC to potential CMV drivers, • Ability to work in modern office with skills including, scanning, MS Office suite, using 3rd party web programs, picture transfer/uploading., • Ability to operate small hand held tools and climb into a class 8 tractor trailer.

Job Description Automotive Finance / Business Manager Top finance position for qualified candidate with a proven track record in the automotive industry. Commission, salary and excellent benefits package. Job Purpose: Provides insurance and financing services to automotive customers by verifying sales information; determining need for financing; evaluating customer creditworthiness; preparing financing and legal documents; selling products and services; maintaining rapport with customers. Duties: • Determines desire/need for automobile financing by interviewing customer; exploring payment options., • Verifies automobile purchase information by reviewing sales contract data; conferring with sales department; making adjustments as needed., • Determines customer creditworthiness by studying customer credit application; obtaining credit reports; analyzing information; comparing customer evaluation to organization standards; searching for lenders in information system; forwarding applications to lenders; conferring with loan underwriters and loan processors; obtaining stipulations when required; approves or rejects loan., • Confirms automobile sales contract information by disclosing data, provisions, finance charges, and interest rates to customer; ensuring understanding of content., • Sells products and services by reviewing desire/need for automobile insurance, credit insurance, extended warranties, anti-theft devices, appearance protection packages, etc.; explaining options, provisions, and premiums., • Maintains dealership reputation by building and maintaining customer rapport; answering questions; providing information; resolving discrepancies and dissatisfactions; maintaining a satisfactory Customer Satisfaction Index; complying with federal, state, and local regulations; helping others comply., • Maintains customer confidence and organization stability by keeping information confidential; helping others comply. Qualifications: Minimum of 2+ years in the Automotive Industry as an F&I Manager Demonstrated Automotive Managerial Skills Excellent communication and problem solving skills Strong attention to detail Excellent follow-through skills Highly skilled in selling; specifically automotive F&I related products & services Powered by JazzHR ILnNQu6fkR

Job Description Want to make six figures? Are you a hard worker? Do you have excellent people skills? If you are an enthusiastic self-starter with a passion for selling and enjoy working with customers, then we want you to be part of our team as an Automotive Sales Consultant. The ideal candidate has a positive attitude, a confident and outgoing personality, a professional appearance, excellent communication skills, and the ability to deliver world-class customer service. 1-2 years of experience is preferred but not required. He or she must be self-motivated and willing to continuously prospect to sell a minimum quota (or more!) on an ongoing basis. RESPONSIBILITIES • Helps customers with vehicle selection and promote model options and features, value-added products and services, and purchase and finance options following dealership policies, • Conducts vehicle test drives and ensures all speed limits and all other rules of the road are followed, • Negotiates sale closure in a clear, concise, and highly ethical fashion, • Helps facilitate delivery by providing a clear explanation of vehicle and features operation, warranty, and servicing requirements, • Maintains accurate sales documentation, • Maintains up-to-date knowledge of all vehicles, accessories, financing options, and promotions, • Attends all staff meetings, training, and educational classes as required, • Helps educate/train new staff members, • Previous 1-2 years of Automotive sales experience, • Professional appearance and demeanor, • Excellent communication and interpersonal skills to interact professionally with customers, co-workers, management, and others, • Must be able to combine customer service skills with a strong close, • Must not have bounced from one sales job to the next, • Must be a "people person" but still know how to control the deal, • Must have an excellent attendance record and a commitment to being on time, • Must have a valid and clean NY state driver's license, • Must be able to pass a drug test and a background check, • Basic computer and internet skills, • A track record of successful sales, high earnings, and a portfolio of previous customers, • Must have an energetic and enthusiastic approach to customer interaction. Wage: $55,000-$120,000 • Commission + Bonus, • Paid Time Off (PTO), • Health Insurance, • Dental Insurance, • Vision Equal Employment Opportunity Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR ppHKU2WIT3

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Moderate physical activity. Salary Range:$33.63 To $48.57 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description At Valcor Engineering Corporation, we design and manufacture advanced fluid control components and systems for the aerospace, nuclear, and scientific industries. Our team is dedicated to innovation, precision, and quality—values that have made us a trusted name for over 70 years. Join a company that’s shaping the future of aerospace technology, one part at a time. Education: • Minimum – High School Diploma, • Preferred – Vocational School Graduate, • Perform assembly and performance testing of electro-mechanical fluid control devices. Comply with essential procedures, blueprints, and associated schematics to ensure safety and quality of product., • Operate, develop, and maintain high pressure test systems, to include pneumatic, hydraulic, and calibration fluid test stands and pumps., • Experience analyzing blueprints and developing procedures., • Demonstrated ability to assemble electro-mechanical hardware., • Experience with high pressure testing with various fluids and gases., • Ability to conduct electrical tests including, dielectric and insulation resistance testing., • Experience soldering to Class B standards. Class A experience preferred., • Computer literacy, Microsoft office, word, and excel experience., • Experience operating in controlled clean-room environments., • Experience conducting clean-room particulate analysis and data collection., • Manufacturing processing experience or machining experience a plus., • Ability to operate diagnostic testing equipment: Oscilloscopes, Lab View, etc., • Ability to systematically troubleshoot and repair hardware., • Ability to lift/move up to 50lbs., • Team oriented and willingness to work in a diverse team environment., • Ability to collaborate in cross-functioning teams to meet customer expectations., • Ability to work independently, without direct supervision., • Willingness to train and mentor junior technicians. Cutting-Edge Projects: Be part of critical work in aerospace, defense, and energy. * Team-Focused Culture: Work with a skilled, collaborative group of industry pros. * Career Growth: Opportunities to develop and move up in a growing company. * Comprehensive Benefits: Competitive pay, healthcare, 401(k), paid time off, and more. The job location is at 2 Lawrence Road, Springfield, NJ 07081 Salary Range:$24.00 To $40.00 Hourly Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries. The CNC Programmer duties and responsibilities include but are not limited to the following: • Work directly with Manufacturing Manager, Machine Operators, Manufacturing Engineering, Design Engineering, and Production Control to produce good programs, keep machines running, and meet production needs., • Programming in Mastercam, • Processes and controls include, 2-3 axis mill/turning, Okuma/Hass/Mazak/FANUC., • CAD in Solidworks, • Read, analyze, and interpret blueprint drawings/specifications., • Tool and fixture selection, I.E End Mills, drills, inserts, custom fixtures, etc., • Organize and maintain programs, setup sheets, and revisions to both., • With machine operator or independently, conduct first run prove outs., • High School or equivalent. Tech school and / or college is a plus., • Minimum 5 years of machining experience preferred., • Minimum 2 years of programming experience preferred., • Be able to work closely with Manufacturing Manager to maintain shop machining schedules and meet production needs., • Be able to take part in employee relations at the shop level including adherence to labor contract provisions. Salary Range:$85,000.00 To $120,000.00 Annually We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job Description The Company is a leader in the solid waste collection, hauling, and disposal industry. The Fleet and Maintenance Manager is responsible for the Company’s fleet of over 100 trucks, yellow-iron, equipment, and other vehicles. The Fleet and Maintenance Manager promotes a proactive, efficient, and service-oriented program aimed at maintaining the Company’s fleet in peak operating condition. He/She provides management and hands-on direction to the Maintenance Team, including direct supervision of maintenance personnel. The Fleet and Maintenance Manager is responsible for replacement schedules, preventative maintenance and repair of Company vehicles, as well as administrative duties, such as parts procurement, inventory management, asset tracking, and cost control. The Fleet and Maintenance Manager utilizes fleet management and onboard computing software to monitor vehicle performance and cost. Additional Responsibilities • Schedule and oversee all planned repair work to increase productivity and allocate resources appropriately., • Maintain an on-going preventative maintenance program, including, identifying trends in road calls, breakdowns, and maintenance needs., • Direct and coach the Maintenance Team to ensure that all maintenance and repairs are performed in a safe, efficient, and timely manner., • Supervise maintenance employees including coaching and counseling on performance and corrective actions as necessary. Render hiring/termination decisions in collaboration with HR and senior management., • Ensure adequate staffing and proper training of the Maintenance department. Identify maintenance employee training requirements and ensure successful completion., • Monitor the overall performance and efficiency of the Maintenance department and take appropriate actions to increase efficiency and effectiveness., • Accountable for fleet and maintenance budget, including the control of maintenance costs, staff, purchasing, inventory, and outsourcing of repairs., • Ensure compliance with Company safety standards, as well as federal and state regulations, including maintenance and repair records and other required documentation., • Maintain advanced knowledge of engine, emission systems, transmission, brake, hydraulic and electrical systems of heavy equipment and vehicles used by the Company, as well as compliance with changes to federal and state regulations., • 10+ years of maintenance/mechanic experience or operational management experience., • 3+ years of experience as a Maintenance Manager or Maintenance Supervisor for a large fleet of vehicles or multiple site locations, or as a Fleet Manager for a medium to large fleet of heavy equipment and yellow iron., • Experience with and knowledge of hydraulic systems, electrical systems, air brake systems, diesel engines, and vehicle computer diagnostics, • Advanced experience working with fleet management and onboard computing software, • Proficient knowledge of Microsoft Office Suite, • Strong communication and leadership skills, excellent time management and organizational skills with the ability to multi-task in a fast-paced environment., • Ability and passion for coaching, mentoring and training employees., • Strong financial acumen and ability to manage to a budget, • Experience working in the refuse industry strongly preferred, • Strong knowledge of DOT, OSHA, and other federal and local regulations and requirement, • Excellent safety record

Job Description • We are hiring immediately for part time FOOD SERVICE WORKER positions., • Location: Westfield School District - 550 Dorian Road, Westfield, NJ 07090. Note: online applications accepted only., • Schedule: Part time schedule; Monday through Friday.8:30 am – 12:30 pm, hours may vary (4-hour shifts)—more details upon the interview., • Requirement: Prior food service experience is preferred, but not required., • Perks: Apply now for Sept. 2025 employment! Will train. No nights, weekends, major holidays, or summers! We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1430196. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Diversity of thought and inclusion for all is what drives our success - we invite you to start your journey with us today! Chartwells K12's goal is to make sure students leave the cafeteria happier and healthier than they came in, by serving food kids love to eat and creating custom dining programs. With more than 16,000 associates in 4,300 schools, ranging from large public institutions to small charter and private schools, Chartwells K12 is built on decades of food, education and operational experience driven by top culinary, nutrition, wellness, and sustainability talent. For more information, visit . Job Summary Summary: Prepares, presents and serves food as needed. Essential Duties and Responsibilities: • Performs prep work such as washing, peeling, cutting and seeding fruits and vegetables., • Weighs and measures designated ingredients., • Carries pans, kettles and trays of food to and from work stations, stove and refrigerator in accordance with safety standards., • Stores food in designated areas following wrapping, dating, food safety and rotation procedures., • Cleans work areas, equipment and utensils., • Distributes supplies, utensils and portable equipment., • Utilizes approved food recipes and production standards to ensure proper quality, serving temperatures and standard portion control., • Serves customers in a friendly, efficient manner following outlined steps of service., • Resolves customer concerns and relays relevant information to supervisor., • Ensures compliance with company service standards and inventory and cash control procedures., • Assures compliance with all sanitation and safety requirements. Both full-time and part-time positions offer the following benefits to associates: • Retirement Plan, • Associate Shopping Program, • Health and Wellness Programs, • Discount Marketplace, • Identity Theft Protection, • Pet Insurance, • Medical, • Dental, • Vision, • Life Insurance/AD, • Disability Insurance, • Commuter Benefits, • Employee Assistance Program About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Chartwells K-12 maintains a drug-free workplace.

Job Description Municipal Engineer Full Time | Wall | Camden | Newark, NJ, US Who We Are At FPA, we are looking for talented and driven professionals to join our commitment to pushing the boundaries of what is possible and providing cutting-edge solutions that make a difference in people's lives. We value individuals who are passionate about their work, who are committed to delivering quality results, and who are eager to learn and grow with us. We value candidates of all backgrounds, experiences, skill sets, and walks of life. At FPA, we actively foster a work environment that promotes inclusion and diversity, which is embedded in the foundation of our practice through policies, training, local partnerships with professional and diverse organizations, internal networks, and leadership support. We offer a dynamic and collaborative work environment where employees are encouraged to share ideas, take on new challenges, and contribute to the success of the company. As an FPA employee, you will have the opportunity to achieve anything you set your mind to, and to help shape the future. If you are a motivated individual who is looking for an exciting and rewarding career opportunity, we encourage you to apply to be a part of a dynamic and inclusive community of professionals. This Opportunity FPA is currently searching for a full-time Municipal Engineer – Wall, Camden or Newark, New Jersey Office. We are actively seeking an experienced municipal engineer with a minimum of five (5) years of experience in infrastructure development inclusive of road improvements, utilities, and public works projects, adept at planning, identifying funding programs, obtaining permits, designing, assisting with public bidding, and providing engineering services during construction for a wide range of municipal or other public projects. Demonstrated leadership in coordinating with stakeholders to deliver cost-effective, sustainable solutions, leveraging innovative technologies for project optimization, and contributing to resilient community advancement. At FPA, our unwavering commitment to dedicated service and innovative solutions has empowered us to build thriving communities and expand our horizons. The ideal candidate will work alongside other talented engineers from various disciplines, collaborating to design, develop, and deliver projects that make a real difference in people's lives. They will bring a fresh perspective, a passion for engineering, and a commitment to excellence. Joining our team will provide you with an excellent opportunity to unlock your full potential, gain invaluable experience, and create a meaningful impact on the world. Core Responsibilities • Performs office and field engineering work involved in the planning, scoping, designing, permitting, and rehabilitating or constructing roads, intersections, streetscapes, site/civil improvements, water supply systems, sanitary sewer collection and conveyance, stormwater management, parks and recreation facilities, public buildings, and grounds improvements., • Familiar with New Jersey Administrative Codes, Local Public Contracts Law, and Municipal Land Use codes and regulations., • Experience with client and stakeholder engagement, and providing customer service in a professional, technical, and timely manner., • Familiar with Planning and Zoning regulations, requirements and protocols and procedures, • Able to perform calculations, prepare graphs, tables, and curves, and prepare letters, memoranda, and reports., • Review and compile information from technical engineering manuals and reports to develop solutions., • Prepare conceptual, preliminary, and detailed design drawings on routine projects from surveys, specific instructions, notes, sketches, and other reference material., • Review developer applications from land use boards, site plans, subdivision plans, stormwater calculations, and grading plans for compliance with Municipal codes and standards, county, state, and federal regulations (as applicable), and conducts business in accordance with best engineering practice., • Prepare development bond estimates, determine inspection fees, schedule inspection staff, monitor status of bonds, review bond reductions / releases, and perform administrative duties related to land development projects., • Oversee preparation and maintenance of municipal maps, record drawings, and other official records., • Assist with preparation of resolutions, ordinances, ordinance amendments, assessments, memoranda, reports, presentations, and public correspondence., • Familiar with pavement and other infrastructure evaluations and preparation of management reports, cost estimates and schedules., • Familiar with NJDEP (and other state regulatory agencies as applicable) rules and regulations inclusive of Tier A MS4 stormwater permits and annual compliance requirements., • Responsible for the coordination and management of multiple tasks and projects simultaneously., • Ability to evaluate and review challenging engineering matters in office or field and to develop appropriate solutions and remedies using innovative ideas and creative thinking., • Ability to prepare clear, technically sound, and informative reports, statements, findings, and recommendations., • Ability to establish and maintain effective working relationships with public officials, clients, employees, regulatory agencies, consultants and partners, utility companies and the public., • Bachelor of Science Degree in Civil or Environmental Engineering, or a related field, from an ABET accredited four-year college or university., • Five (5) plus years of related Civil Engineering work experience serving municipal, county or state governments, and other public agencies., • Licensed Professional Engineer (NJ, NY and/or PA) or ability to acquire PE through reciprocity., • Excellent problem-solving skills and a willingness to learn., • Strong communication and interpersonal skills., • Organizational skills related to office records, field documents, and correspondence., • Ability to work effectively in a team and adapt to a dynamic work environment., • A passion for contributing to environmentally sustainable solutions and familiar with the seventeen (17) world Sustainable Development Goals., • Thorough knowledge of the principals, practices, modern methods, techniques of civil engineering related to preparing plans, specifications, designs for and inspection of public improvement construction projects., • Comprehension of hydraulic analysis and design pertaining to water, sanitary sewers and storm sewer systems and hydraulic modeling experience a plus., • Detailed knowledge of Municipal Land Use Law, Local Public Contracts Law, NJDEP regulations, NJDOT standards, AASHTO, and MUTCD., • Fundamental knowledge of ESRI GIS systems and proficiency in AutoCAD Civil 3D design and drafting plans., • Certified Municipal Engineer (CME) certification through the NJ Municipal Engineering Institute., • Master of Science Degree in Civil or Environmental, or a related field, from an ABET accredited college of university. As a valued member of our team, we provide you with a flexible benefits package that reflects our respect for your workplace contributions, professional goals, and personal priorities. FPA offers an extensive range of benefits, including medical, dental, vision, disability, life, and retirement savings, aimed at ensuring the physical well-being and financial security of employees throughout their careers. The personal benefits program at FPA includes the following: • Medical, Dental, Vision insurance, • 401(k) Retirement Plan with Employer Matching & Roth 401(k) Option, • Individual and Dependent Life Insurance, • Short and Long-Term Disability Insurance and Supplemental Insurance Plans, • Employee Assistance Program (EAP) and Wellness Benefits, • Tuition Reimbursement, • Training and Professional Development, • Corporate sponsored events, outings & activities, including community outreach opportunities., • Competitive Personal Time Off Program (PTO), • Transit/Parking Program, • Summer Hours, • Employee Discounts The projected compensation range for this position is $115,000 to $175,000. Actual compensation will depend on factors such as experience, education, skill set and location. About FPA Since 1974, French & Parrello Associates (FPA) has partnered with clients to address the ever-changing challenges of the world around us. Nationally and locally ranked among Engineering News - Record’s Top Firms, FPA has the staff and resources to provide innovative engineering services to clients in both the public and private sectors across a growing network of locations in New Jersey, New York, Pennsylvania, and Georgia. From modernizing the aging infrastructure, to designing state-of-the-art facilities and serving as stewards to our environment, FPA improves quality of life. At our core, we are a dedicated group of professionals focused on servicing our clients and improving our world. Our team’s technical resources include site/civil, water, wastewater, water resources/dams, geotechnical, structural, bridge, highway, mechanical and electrical engineers, licensed land surveyors and landscape architects, as well as environmental professional and LSRPs, materials testing technicians, and construction oversight professionals and technicians. Our ability to service our clients is bolstered by a highly motivated team of marketing, business development, accounting, information technology, and administrative staff. Our professionals’ daily contributions play a crucial role in achieving client objectives, meeting goals, and improving our world.

Job Description Dental Hygienist Job Description: We are looking for an experienced dental hygienist who will treat our patients in a caring and professional manner. Patients are given full hour appointments to allow for x-rays, probing, a thorough hygiene visit and exam. If you are looking for a position in a highly established practice which is committed to quality care, this practice is for you. Full or part time position is available. Responsibilities: 1. Conduct thorough and comprehensive oral evaluations to identify dental conditions and oral health issues., 2. Perform routine dental cleanings, including scaling, polishing, and fluoride treatments., 3. Obtain and review patients' medical histories, noting any pre-existing conditions or allergies that may affect dental treatments., 4. Take dental x-rays as needed, ensuring accuracy and adherence to safety protocols., 5. Educate patients on proper oral hygiene techniques and provide oral care instructions., 6. Detect and report any signs of oral diseases, such as cavities, gingivitis, or oral cancer., 7. Apply preventative measures, such as dental sealants or fluorides, to protect patients' teeth., 8. Collaborate with dentists to develop individualized treatment plans for patients' oral care needs., 9. Maintain and sterilize dental instruments and equipment, ensuring compliance with infection control protocols., 10. Document patients' dental care by accurately recording all treatments, diagnoses, and recommendations in their charts., 11. Assist with scheduling patients' follow-up appointments and communicate treatment plans effectively. Requirements: 1. Valid Dental Hygienist license/certification from an accredited dental hygiene program., 2. Proven experience as a Dental Hygienist, with a strong understanding of oral health and dental procedures., 3. Knowledge of dental instruments and equipment, and ability to accurately operate and maintain them., 4. Proficiency in taking dental x-rays., 5. Strong communication and interpersonal skills to effectively educate and communicate with patients., 6. Excellent attention to detail and organizational skills., 7. Ability to prioritize and manage multiple tasks efficiently., 8. Commitment to following infection control protocols and maintaining a safe work environment. If you are looking to work in a warm, caring, family-like environment with a compassionate talented dentist this office is for you!

Job Description Maplecrest Ford Lincoln is seeking an individual who is driven and upbeat to head Customer relations for our service Department. We are a very busy Fixed Ops Dealership. We want someone to come aboard who is ready for a challenge and is able to bring their own technique to our team. This position is not a desk job. We are seeking someone who is adaptable and able to wear many hats. Duties/Responsibilities: Greeting all Service Customers Upon arrival Data Entry Scheduling Service Appointments and Calling Missed Appointments Sending out Weekly E-blasts and Mining for potential Sales Opportunites Marketing for the service department. Going out on the road to prospect for new accounts for our fleet department. Running reports Drafts, implements, and executes policies and procedures to facilitate an overall quality customer service experience 10 years Experience in Customer Service preferred Salary: Up to 100k Equal Employment Opportunity Maplecrest Ford Lincoln does not discriminate in employment opportunities or practices on the basis of race, color, religion, sex, national origin, age, disability or any other characteristic protected by law. In order to provide equal employment and advancement opportunities to all individuals, employment decisions at Maplecrest Ford Lincoln will be based on merit, qualifications and abilities. Job Description The statements included in the job description are intended to outline the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed Powered by JazzHR F0HcGFr7va

Job Description Road and Bridge Construction Inspectors - Experienced in highway and bridge construction with a NICET 2 or 3 or equivalent experience. Various projects located the New Jersey area. Paving/drainage/roadway and bridge construction inspection experience is required. ACI certs, Asphalt NJSAT cert, Rutgers TCP traffic cert, ICC Specialty Certs, are a BIG plus. Full Benefits. Company also promotes bonus incentives based on profit and performance. GREAT COMPANY!! Please send in a resume to find out more. PLEASE DO NOT SEND RESUMES IF YOU LIVE OUTSIDE OF THE NYC TRI-STATE AREA. Company DescriptionVery good company with incentives for good performance.Very good company with incentives for good performance.

Job DescriptionResidential Senior Plumber ???? We invite full-time senior Residential Plumbers to join our service team in Union, NJ. Who We Are Service Professionals is on a mission to create remarkable experiences that leave our customers giving us their enthusiastic "Thumbs Up!" This isn't just a goal - it's our promise. We do more than just fixing plumbing, heating, cooling, and electric issues. We consider our job incomplete until we see their thumbs up high in approval. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We are building a culture that values collaboration. We offer strong compensation packages, uncapped performance-based bonuses, and exceptional training programs. These have the potential to be life-changing opportunities for driven professionals. Depending on experience, this role will make at least $25 - $50 an hour. High performers will receive a sales bonus, bringing total compensation between $90,000 and $160,000 ????Top Compensation: We aim to be the top total compensation benchmark in the industry with the best bonus program available. ???? Exceptional Benefits: We provide our teams with full benefits including health and dental - with deductibles covered. Full-time staff receive a 401k. ???? Your Own Truck: Gas card included. All techs can (and should) take home their trucks to be dispatched from home. ????️ Cutting-Edge Tech: We invest in the tech to make your job easier, more efficient, and, most importantly, more enjoyable. ???? Recognition and Rewards: Hard work won't go unnoticed. We recognize and celebrate your achievements, both financially and culturally. ???? Room for Growth: You're not just another number; you're a person with ambitions. We offer pathways for true career development. ???? Inspiring Work Environments: We understand and respect that life…happens. We take care of our people and support them on their life journeys. Who You Are This will be an exceptional opportunity for you if you have the following skills & experiences. If you don’t - you can still apply and learn them with us! ⛏️ You like getting your hands dirty. ???? You embrace technology. ???? You avoid shortcuts when nobody is watching. ???? You make people feel comfortable. You are the kind of person that anyone would send to their own mother’s house, without any concerns. People love having you around and value your advice. ???????? You are physically up to the task! This is a demanding job that requires hard, manual labor. What You Know Everyone has a unique career journey. Even if you don’t know everything on this list, we encourage you to apply and have a conversation with us. Candidates for this role should have: ???? Deep technical plumbing knowledge, with a focus on the residential sector. ???? Relevant state licenses and certifications. ???? Expert knowledge of safety regulations and local plumbing codes. ???? Valid driver’s license with a safe driving record. ???? Fluency in English. What Will You Do? First off, you will commit to delivering an exceptional customer experience. Always. This role will be focused on Residential Service, playing a critical role in responding to plumbing service and repair calls. This will include the most complex of jobs. You will: ???? Diagnose and resolve plumbing issues, while building strong relationships with our customers. ???? Identify potential problems to prevent premature and unexpected breakdowns/callbacks. ???? Explain multiple options to the client, keeping them updated with each service performed. ???? Educate and assist customers in choosing the best options (quality and financial value) and servicing agreements. ???? Understand your service metrics and hold yourself accountable for exceeding revenue goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions - All Trades and Warehouse Departments To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team!

Job DescriptionResidential Plumber ???? We invite full-time Residential Plumbers to join our service team in Union, NJ. Who We Are Service Professionals is on a mission to create remarkable experiences that leave our customers giving us their enthusiastic "Thumbs Up!" This isn't just a goal - it's our promise. We do more than just fixing plumbing, heating, cooling, and electric issues. We consider our job incomplete until we see their thumbs up high in approval. ???? Join us on this remarkable road, where every day our success story is written with thumbs pointed up. What We Offer We are building a culture that values collaboration. We offer strong compensation packages, uncapped performance-based bonuses, and exceptional training programs. These have the potential to be life-changing opportunities for driven professionals. Depending on experience, this role will make at least $25 - $50 an hour. High performers will receive a sales bonus, bringing total compensation between $90,000 and $160,000 ????Top Compensation: We aim to be the top total compensation benchmark in the industry with the best bonus program available. ???? Exceptional Benefits: We provide our teams with full benefits including health and dental - with deductibles covered. Full-time staff receive a 401k. ???? Your Own Truck: Gas card included. All techs can (and should) take home their trucks to be dispatched from home. ????️ Cutting-Edge Tech: We invest in the tech to make your job easier, more efficient, and, most importantly, more enjoyable. ???? Recognition and Rewards: Hard work won't go unnoticed. We recognize and celebrate your achievements, both financially and culturally. ???? Room for Growth: You're not just another number; you're a person with ambitions. We offer pathways for true career development. ???? Inspiring Work Environments: We understand and respect that life…happens. We take care of our people and support them on their life journeys. Who You Are This will be an exceptional opportunity for you if you have the following skills & experiences. If you don’t - you can still apply and learn them with us! ⛏️ You like getting your hands dirty. ???? You embrace technology. ???? You avoid shortcuts when nobody is watching. ???? You make people feel comfortable. You are the kind of person that anyone would send to their own mother’s house, without any concerns. People love having you around and value your advice. ???????? You are physically up to the task! This is a demanding job that requires hard, manual labor. What You Know Everyone has a unique career journey. Even if you don’t know everything on this list, we encourage you to apply and have a conversation with us. Candidates for this role should have: ???? Deep technical plumbing knowledge, with a focus on the residential sector. ???? Relevant state licenses and certifications. ???? Expert knowledge of safety regulations and local plumbing codes. ???? Valid driver’s license with a safe driving record. ???? Fluency in English. What Will You Do? First off, you will commit to delivering an exceptional customer experience. Always. This role will be focused on Residential Service, playing a critical role in responding to plumbing service and repair calls. This will include the most complex of jobs. You will: ???? Diagnose and resolve plumbing issues, while building strong relationships with our customers. ???? Identify potential problems to prevent premature and unexpected breakdowns/callbacks. ???? Explain multiple options to the client, keeping them updated with each service performed. ???? Educate and assist customers in choosing the best options (quality and financial value) and servicing agreements. ???? Understand your service metrics and hold yourself accountable for exceeding revenue goals. We Are An Equal Opportunity Employer Service Professionals is an affirmative action and equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. Service Professionals is committed to providing access, equal opportunity, and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. Physical Demands/Working Conditions - All Trades and Warehouse Departments To perform the duties of this job, you are regularly expected to sit, stand, walk, kneel, squat, stoop hands to finger, handle controls, hear, and talk. You must be able to reach with your hands and arms, climb ladders, and work in hot/cold environments such as crawl spaces. You will regularly lift 50+ pounds. Specific vision abilities required include close vision and the ability to adjust focus. The work environment can vary depending on the season and scope of work - you will be expected to be outside throughout multiple seasons. ???? Apply now to join a remarkable team! You should be proficient in: $25 - $50 / hr

Job Description Looking for a Licensed Practical Nurse in Union, NJ to take a sweet student to school starting ASAP. You will arrive at the patient's home and travel on the bus with them to the school. Position: LPN Location: Township of Union, 07083 Open hours: • Monday - Friday AM and PM - 1 Student Needs Nurse Contact Recruiting by email: Job Type: Part-time to Full-time Pay Rate: $36 an hour Benefits: • 401(k), • Health and Dental Benefits, 30+ hour schedules only, • Day shift, School schedule ATC Healthcare Services, LLC is an Equal Opportunity Employer. All applicants will be considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, veteran or disability status, or any other category protected by federal, state, or local law.

Job Description Under minimum supervision working from blueprints, sketches written and/or verbal instructions, sets up and performs the most diversified and complex progressive machining, fitting and assembly operations. Determines proper tooling and sequence of operations, and skillfully uses all machinists’ hand tools and machine shop measuring equipment in order to produce work to specifications. Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tool to be used. ESSENTIAL FUNCTIONS • Must be able to make complicated set-ups and operate available machine tools; determine operational sequences, proper jigs, fixtures and design of tools to be used., • Must be able to skillfully use all machinist’s hand tools and measuring instruments., • Must be familiar with the machining of most materials., • Must be able to use advanced shop math, including trigonometry., • Moves parts to and from the work area., • Maintains good housekeeping in the work area., • Meets all safety requirements in the machine shop and follows all company policies., • Requires a High school diploma or equivalent education, • Requires the completion of an apprenticeship program or similar on the job experience of approximately four years or at least five years experience as a machinist., • Ability to operate standard and specialized equipment to produce prototype and/or production parts, • Ability to perform standard shop computations, using technical math, geometry and trigonometry., • Proficient use of set up and operation of CNC machining center., • Proficient use of tool and surface grinders, • Proficient use of all shop inspection equipment, including but not limited to, CMM, comparator, digital height gages, micrometers, etc., • Moderate physical activity. The job location is at 2 Lawrence Road, Springfield, NJ 07081 We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Please note: The salary range is based on our market pay structure. However, individual salaries are determined by a variety of factors including, but not limited to, business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience. Employee Benefits: At Valcor Engineering, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 30+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; long term disability coverage; and life and accident insurance. We also have an employee assistance program. Our leave programs include Vacation and PTO time off, paid holidays, as well as other types such as bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. We are an equal opportunity employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. All qualified applicants will be considered for employment without regard to these characteristics. Company DescriptionValcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.Valcor Engineering is one of the largest and most recognized suppliers of fluid control products in the aircraft, aerospace and military fields. We specialize in the design and manufacture of Solenoid Valves and control components for liquids and gases in critical application in the aerospace, nuclear, light industrial and scientific industries.

Job DescriptionSalary: $63,000-$89,000 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for road and bridge inspections. Our ideal candidate will be a highly motivated & qualified individual, with experience in soil testing, quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects.In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey and the New York Metro, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors schedule, to include night work, weekends, and holidays. This job requires travel to various job sites within 75 miles of Woodbridge, NJ. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations., • Inspection of testing of soils., • Maintain project records., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Record monitoring well data., • Enter data for Test calculations., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification, • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various job sites within 75 miles of Woodbridge, NJ. Who you are: * • Bachelors degree in Biological Engineering, Chemical Engineering, Civil Engineering, Civil Engineering Technology, Construction Engineering, Geological Engineering, Materials Engineering, Metallurgy Engineering, Structural Engineering, or Transportation Engineering., • Familiar with ASTM, AASHTO and ACI standards for testing and inspections., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, • International Code Council (ICC) - Soil Inspector, • New Jersey DCA Certified, • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid drivers license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey and New York., • US Citizenship; Authorized to work in the United States., • 3+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with gINT software., • NICET I or II certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Eligible to participate inmcfas family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfacontributes up to 75% shared cost, not to exceed $700 per month., • Companypaid life insurance plan (up to $100,000 per employee)., • You are eligible to participate in Company retirement plan (401k) on first day of employment withmcfa. mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job Description About Us Welcome to WIFIRE, your trusted partner in telecommunications contracting for national cable and internet providers across the United States. At WIFIRE, we bridge the digital divide by connecting Residential and Commercial customers to a world of possibilities. Our team of skilled technicians is at the forefront of the telecommunications industry, providing comprehensive services that encompass High-Speed Data, Phone, Video, Smart Home, and Home Security products. What you'll be doing: • Provide customer service and support during field visits and tie workflow to schedules to ensure maximum efficiency., • Manage all on-site installation, maintenance, repairs and testing tasks to ensure proper documentation of all related processes., • Diagnose errors and technical problems and determine proper solutions to produce timely and detailed service reports., • Collaborate with the technical team and share information across the organization to build positive relationships with clients and coworkers., • Contractors must follow safety guidelines and provide their own Tools & Personal Protective Equipment (PPE). Pay $1200.00 to $2500.00 Per Week depending on skill set & production. No Material Cost, 21-Net No Retainer/Direct Deposit Paid Weekly, Advanced payment (after 1st work week upon request) Qualifications We're looking for technicians with experience in COAX, FIBER, MDU, CONSTRUCTION, and other telecom experience. • Must be able to pass the Background check and Drug test., • Must have a valid Driver License and Social Security Card or ITIN., • Own/Rent Vehicle (pick up truck or minivan, SUV) would be a plus. Phone: +1(929) 647-3750 Job Type: 1099 Contract Pay: $1,200.00 - $2,500.00 per week Work Location: On the road