Trabajos siemens en Rahway, New JerseyCrear alertas

Senior Controls Engineer - Springfield, NJ A growing automation systems integrator specialising in custom machine building and full systems integration is looking for a Senior Controls Engineer to anchor its engineering team in Springfield, NJ. This is a hands-on technical leadership position suited to an experienced professional who can take complex projects from concept to completion - shaping system architecture, leading the programming effort, and running commissioning, all while coaching less-experienced engineers and acting as a go-to technical advisor for customers. The successful candidate will bring deep practical expertise, sound decision-making when requirements are unclear, and the confidence to lead through influence within a lean, fast-paced team. Key Responsibilities • Technical Leadership: Act as lead engineer on complex, multi-disciplinary builds - owning key architecture decisions, setting the technical direction, and guiding engineers and technicians from initial concept through to commissioning., • Advanced Programming: Design and build PLC, HMI, motion control, robotics, and vision applications across leading platforms such as Allen-Bradley, Siemens, FANUC, UR, Cognex, Keyence, and Beckhoff., • Standards & Best Practice: Create and maintain engineering standards, reusable code libraries, and documentation templates that lift quality and consistency across the project portfolio., • System Integration: Oversee the integration of control systems into existing manufacturing lines, coordinating mechanical, electrical, and software workstreams to deliver efficient, reliable, and maintainable solutions., • Commissioning & Troubleshooting: Lead on-site start-up, system analysis, and advanced fault-finding, resolving the most difficult integration and performance challenges to keep equipment running at its best., • Mentorship & Support: Guide junior and mid-level engineers, run design and code reviews, and provide expert support and training to internal teams, technicians, and customers., • Project Execution: Manage project schedules, budgets, and vendor relationships, controlling scope and change orders to deliver on time and on budget., • Compliance & Safety: Ensure every project meets regulatory requirements and follows strict safety practices, including applicable UL 508A and industrial electrical safety standards. Qualifications • Education: A bachelor's degree in electrical engineering, mechanical engineering, computer science, or a related technical discipline is required., • Experience: At least 8 years in controls engineering, ideally within industrial, manufacturing, systems integration, or custom machine-building settings, with a proven record of running projects independently from concept to commissioning., • Technical Proficiency: Extensive, hands-on PLC programming and configuration skills. Rockwell platform experience is strongly preferred, with Siemens and/or Beckhoff proficiency also valued. A solid grounding in robotics, motion control, vision systems, sensor integration, and data acquisition is essential., • BOM & Documentation: Expert-level handling of structured BOMs and full electrical drawing packages across the complete project lifecycle., • Delivery Track Record: Consistent success delivering on time and on budget in a project-based or job-shop setting, including ownership of change-order processes., • Small-Shop Mindset: Comfortable in a lean, self-directed environment - happy to wear multiple hats and take full ownership of outcomes. Previous experience with an integrator or custom machine builder is a strong advantage., • Communication: Clear, direct communicator with internal teams, customers, and vendors, able to translate complex technical detail for different audiences. What's on Offer • Competitive salary with annual bonus potential and a clear path toward career growth and technical leadership., • A collaborative, low-bureaucracy culture where individual decisions carry real weight., • Exposure to a wide range of industries and machine types - no two projects are alike., • A team that takes pride in craftsmanship, accountability, and continuous improvement. Core Values • Champion the Customer: Build genuine partnerships, do the right thing, and win as a team., • Own It: Take accountability, work the problem, and drive results., • Deliver Excellence: Take pride in the work, bring expertise, and sweat the details., • Spark Innovation: Stay curious, embrace challenges, and keep growing., • Stronger Together: Respect, support, and look out for one another.

We are seeking an experienced 1st Shift Automation & Controls Technician to support and maintain automated manufacturing and facility systems in a fast-paced industrial environment. The ideal candidate will have strong PLC, SCADA, electrical troubleshooting, and preventive maintenance experience, along with a commitment to safety and operational excellence. Key Responsibilities • Program, troubleshoot, and maintain PLC and SCADA systems., • Diagnose and repair electrical, automation, and industrial equipment issues., • Read and interpret electrical schematics, blueprints, and technical documentation., • Perform preventive maintennce, inspections, and equipment testing., • Support control system design, documentation, and continuous improvement initiatives., • Ensure compliance with electrical safety, lockout/tagout (LOTO), and arc flash procedures., • Collaborate with maintenance and operations teams to maximize equipment reliability. Qualifications • 3+ years of experience with industrial automation, PLC programming, and troubleshooting., • Experience with Allen-Bradley, Siemens, or similar PLC platforms., • Strong understanding of electrical systems, controls, and industrial equipment., • Knowledge of NEC, OSHA, NFPA 70E, and electrical safety standards., • Ability to work independently and as part of a team., • Comfortable performing physically demanding tasks, including climbing, lifting, and working in confined spaces., • Available for paid overtime Preferred Qualifications • Associate degree or technical certification in Electrical Technology, Engineering, or related, • Experience with SCADA systems and HMI development., • Electrical maintenance certifications., • Experience with pneumatic, hydraulic, or welding systems., • Bilingual English/Spanish is a plus. Apply today to join a growing organization focused on safety, reliability, and continuous improvement.

Job Description: This is a systems-level role requiring a strong hardware background and prior experience in the following areas: · Design of complex high-speed digital circuit card assemblies, including PCIe · Leading and mentoring junior engineers · Supporting testing and troubleshooting of systems, modules, and sub-assemblies, working closely with program engineering teams · Collaborating with Engineering, Operations, Quality, and other teams to drive root cause analysis and defect resolution · Driving improvements in product and test design to reduce cost, improve yield, and increase throughput · Creating and reviewing technical documentation such as test procedures, drawings, specifications, reports, and ECOs · Interfacing with government customers and suppliers as needed · Providing training and support to technicians and manufacturing teams · Supporting Root Cause and Corrective Action (RCCA) activities · Mentoring peers and junior engineers Required Education, Experience & Skills: · Experience in Model-Based Systems Engineering (MBSE) · Hands-on experience with MATLAB/Simulink · Experience with airborne actuators · Bachelor’s degree with 5+ years of relevant experience (or equivalent) · High-speed digital circuit card design experience · Experience in design, integration, and testing of complex electronic systems · Strong understanding of electrical engineering principles and problem-solving Preferred Skills: · Industrial temperature digital circuit card design · FPGA-based circuit card design · Experience with embedded processors, PCIe, Ethernet, 1553, SERDES, Fiber Optic, DDR3/DDR4 · Experience with CAD tools (Mentor/Siemens Xpedition) · Pre- and post-layout simulation using HyperLynx · Ability to guide layout and routing rules · Strong technical communication and documentation skills · Proven ability to meet challenging design requirements · Leadership qualities and ability to work in a team environment · Strong analytical and problem-solving skills · Ability to own tasks and drive them to completion · Experience presenting technical information to stakeholders

Job DescriptionMRI Technologist - Maplewood, NJ (#3442) • Location: Maplewood, NJ., • Employment Type: Full-time., • Hourly Rate: $40/hr - $45/hr. About Greenlife Healthcare Staffing:Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview:Greenlife Healthcare Staffing is seeking a full-time MRI Technologist to join an Imaging Office at a Radiology Group in Maplewood, NJ. This role requires an experienced professional with significant MR work experience, particularly with high-field magnets. The position offers a highly competitive hourly rate and the opportunity to train in and perform remote MRI scanning. Why Join Us? • Competitive Compensation: $40/hr - $45/hr., • Comprehensive Benefits:, • Medical, dental, and life insurance., • 401k / pension., • Profit-sharing plans., • Generous paid time off policy and more., • Work Schedule: Full-time position., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes. Qualifications: • Education: Graduate of an accredited Radiologic Technology or MRI program., • Licensure: ARRT(MR) certification required., • Experience: 1 year of MR work experience required; high-field magnet experience is a must; GE high-field magnet experience preferred; Phillips and Siemens experience a plus; CT experience preferred., • Technical Skills:, • May be required to train in and perform remote MRI scanning., • Will be required to perform duties in or near areas containing specialized imaging equipment and must be able to adhere to all department and facility safety protocols. Key Responsibilities: • Perform MRI exams with accuracy and care using high-field magnets across multiple office locations., • Operate and maintain MRI imaging equipment according to established protocols on various equipment brands (GE, Phillips, Siemens), • Ensure patient safety and comfort throughout all procedures, including screening for MRI safety contraindications., • Train in and perform remote MRI scanning as required., • Adhere to all department and facility safety protocols, especially when working in or near areas containing specialized imaging equipment., • Maintain required certifications and stay current with industry standards., • Collaborate with radiologists and other healthcare team members as needed., • Utilize CT experience as a plus when applicable., • May be required to perform duties in or near areas containing specialized imaging equipment Greenlife Healthcare Staffing- Empowering Healthcare Professionals, Enriching Lives.

Job Description Senior Lead Controls & Robotics Engineer We are seeking a hands-on Lead Controls & Robotics Engineer to lead the design and implementation of advanced automation systems integrating industrial controls, robotics, machine vision, motion control, and custom automation equipment. This is an opportunity for a technically strong engineer who enjoys leading complex projects, mentoring other engineers, and remaining hands-on from system concept and design through commissioning and production startup. What You'll Do • Serve as the technical lead on complex automation and system integration projects., • Lead and mentor Controls, Robotics, and Vision Engineers while providing technical direction throughout project execution., • Design and program PLC, HMI, motion control, robotics, and machine vision systems., • Work with controls platforms including Allen-Bradley/Rockwell, Siemens, and Beckhoff., • Develop and integrate robotic applications using FANUC, ABB, KUKA, UR, and Denso., • Design and implement machine vision applications using Cognex, Keyence, and Matrox Imaging., • Develop vision-guided robotic applications for inspection, measurement, verification, barcode/OCR, and 2D/3D vision applications., • Integrate controls, robotics, vision, sensors, motion systems, and industrial networks into complete automation solutions., • Lead FAT, SAT, commissioning, debugging, customer acceptance testing, and production startup., • Provide advanced troubleshooting and optimization of automation systems in manufacturing environments., • Establish engineering standards, reusable code libraries, and documentation practices., • Review and manage structured BOMs, electrical drawings, and project documentation., • Manage technical scope, project priorities, schedules, vendors, and engineering changes., • Ensure systems meet applicable safety and electrical standards, including UL 508A requirements., • Work directly with customers, vendors, manufacturing teams, and internal engineering groups. Qualifications • Bachelor's degree in Electrical Engineering, Mechanical Engineering, Computer Science, Automation Engineering, or related technical discipline., • 5+ years of experience in industrial automation, controls, robotics, machine vision, or systems integration., • Strong hands-on experience with Rockwell/Allen-Bradley PLC programming required., • Experience with Siemens and/or Beckhoff is highly desirable., • Strong background in robotics, machine vision, motion control, sensors, and industrial automation., • Demonstrated ability to lead projects independently from concept through commissioning., • Experience mentoring engineers or providing technical leadership., • Experience working for an automation integrator, OEM, custom machine builder, or project-based manufacturing environment preferred., • Strong troubleshooting, communication, leadership, and customer-facing skills., • Comfortable working in a lean environment and taking ownership of multiple projects., • Ability to travel approximately 25%. Compensation & Benefits • $100,000 – $150,000 +, • Bonus Potential, • Comprehensive Benefits Package, • Flexible Work Environment, • Opportunity to lead technically challenging automation, robotics, and machine vision projects Work Authorization • U.S. Citizen or Permanent Resident (Green Card Holder) To Apply ???? ???? Call/Text Steve Moore – ???? Connect with me on LinkedIn #engineering #controls #robotics #industrialautomation #plc #systemsintegration #hybrid, #midsenior #libertyjobs \nCompany Description Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move! Hundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month. Established in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on: Information Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists. Libertyjobs.com has become an essential destination site for experienced job seekers. Our recruiters are continually posting active job openings to the website. Feel free to search our database of open positions and apply for your next career move!\n\nHundreds of new jobs are listed on the site every month in a wide range of industries and locations. Last year we had over 900,000 unique job seekers visit our website, which means over 75,000 skilled job seekers search our openings every month.\n\nEstablished in 2003, Liberty Personnel quickly grew into one of the largest technical recruiting agencies on the East Coast. Today, Liberty Personnel has a national presence and a diverse client base. Listed below are a number of the industries and openings we work on:\n\nInformation Technology, Software Programmers, Engineering, Manufacturing, Legal, Plant Maintenance, Construction, Oil and Gas, Medical Communications, Accounting, Finance, Electronics, Scientific, Medical Device, Sales, Pharmaceutical, Admin, Automation, Controls, Civil, HVAC, Wastewater, Structural, Electrical, Chemists, Validations, Logistics, Food Production, Renewable Energy and Machinists.

Job Description As a 100% Employee-Owned company, Robert E. Mason & Associates, Inc. believes our Associates are the foundation of both our customers' and our success. Our strong company culture, and belief in continued investment in our Associates, has helped us realize long Associate tenures, as well as long lasting relationships with our customers. Under the Robert E. Mason & Associates, Inc. umbrella there are two divisions: R.E. Mason and Apperture Solutions. Apperture Solutions is a technology independent, professional consulting, and implementation services firm. Apperture Solutions offers Data Enablement, Production Optimization, Operations Management, and Other Value-Added Services. Apperture Solutions partners with other providers to offer our customers the technologies and solutions that fit their needs. What Apperture Solutions Offers Associates: Apperture Solutions is a 100% employee-owned company that offers a comprehensive, industry leading benefits package to all eligible Associates: • Participation in the Employee Stock Ownership Program (ESOP), • Retirement plan, including a Safe Harbor contribution, • Medical / Dental / Vision Insurance, • Employer paid Life Insurance and Long-Term Disability Insurance, • Generous paid leave options that include vacation time, sick leave, personal leave time, R.E. Mason Way Half Day, paid Jury Duty, and paid Bereavement Leave, • Paid Parental Leave, • Paid company holidays, • Career Development Program, • Retirement and Financial Wellness program, • Employee Assistance Program (EAP), • Alternative/Hybrid Work Schedules General Description We are looking for a talented and dedicated Senior Automation Engineer to join our Facility Automation Services Team. The ideal candidate will have a strong background in building management systems and other facility automation systems (including access control systems, video surveillance systems, and other complimentary solutions), excellent problem-solving skills, project management experience, and the ability to work effectively as a lead in a team environment. This role involves planning and overseeing the design, configuration, and commissioning of facility automation systems to ensure optimal performance and reliability. The role also provides site engineering support to customers. Typically, this includes maintaining and updating existing configuration, implementing small scale expansion projects and assisting with process optimization projects. Specific Responsibilities • Design, configure, troubleshoot, and maintain various building management and facility automation systems., • Plan architectures for interfaces between various building management systems and with other systems, including SCADA solutions, local Historians and 3rdparty systems., • Develop test plans and strategies for commissioning of facility automation systems either at vendor facilities or at the customer's site during installation, and lead an automation commissioning team., • Advise customers on technology selection, project execution strategy, and technical problems., • Develop project budget and schedules, integrating with engineering partner and client project management teams., • Provide technical support and guidance to other team members and clients as needed., • Lead a team of facility automation engineers, overseeing and reviewing their work as the client's primary point of contact., • Plan and develop system documentation deliverables, including functional requirements specifications and detailed design specifications for a variety of applications., • Support Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs)., • Support start-up and commissioning activities at customer sites. Qualifications Required Competencies • US Citizenship required, • Experience with Siemens Apogee / Desigo platforms, Schneider EcoStruxure (EBO), Johnson Controls MetaSys, Honeywell Niagara BMS framework, or other relevant BMS platforms., • Advanced knowledge of HVAC controls, utility controls, and environmental monitoring., • A self-starter acting as the working lead of a team in a fast-paced environment., • Ability to communicate effectively with team members and clients, both orally and in writing., • Excellent problem-solving and analytical skills., • Strong attention to detail and commitment to quality., • Willingness to travel as needed to support project requirements in – approximately 25%. Required Education and Experience • Relevant Associates Degree or B.S. in CHE, EE, ME, Comp. Eng, Systems Eng., Comp. Sci., or other related disciplines, • 8-15 years of relevant experience, • MS Office Experience Preferred Experience/Competencies • Experience with building access control systems, video surveillance systems, energy management systems, and lighting control systems, • Windows and network troubleshooting skills., • Knowledge of applicable industry standards such as ISA and IEC., • Experience working in regulated industries, with pharmaceuticals industry experience strongly preferred., • Experience with computer systems validation. Physical Requirements • Standing, • Walking, • Sitting, • Kneeling, • Reaching Overhead, • Climbing, • Pushing and Pulling, • Lifting - 20 pounds, • Using a Computer, • Using a Telephone, • Driving Compensation The base salary range for this role is $80,000 to $200,000 annually. Individual compensation may vary based on experience, qualifications, and other job-related factors. Apperture Solutions is a federal contractor and, as such, is required to solicit the disability status and protected veteran status of candidates. Thus, you are required to answer self-identification questions as part of your application process. These questions are part of Apperture Solution's Affirmative Action Plan and the completion of these questions will not have any effect on any consideration of your application materials. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and need to request an accommodation in order to apply for a position with Apperture Solutions, please call our office at (704) 375-4465. This is a drug-free workplace. Employment is contingent upon the successful completion of any required pre-employment and, if applicable, ongoing drug testing, including testing mandated by customer site access requirements.

Job Description MRI Technologist - Maplewood, NJ (#3442) Location: Maplewood, NJ Employment Type: Full-time Hourly Rate: $40/hr - $45/hr About Greenlife Healthcare Staffing: Greenlife Healthcare Staffing is a leading nationwide recruitment agency dedicated to connecting healthcare professionals with top-tier opportunities. We partner with hospitals, clinics, nursing homes, multi-specialty groups, and private practices to match talented individuals with roles that align with their skills and career goals. Position Overview: Greenlife Healthcare Staffing is seeking a full-time MRI Technologist to join an Imaging Office at a Radiology Group in Maplewood, NJ. This role requires an experienced professional with significant MR work experience, particularly with high-field magnets. The position offers a highly competitive hourly rate and the opportunity to train in and perform remote MRI scanning. Why Join Us? • Competitive Compensation: $40/hr - $45/hr, • Comprehensive Benefits:, • Medical, dental, and life insurance, • 401k / pension, • Profit-sharing plans, • Generous paid time off policy and more, • Work Schedule: Full-time position., • Professional Growth: Gain valuable experience in a collaborative, innovative, and supportive environment., • Impactful Work: Contribute to a mission-driven organization dedicated to improving patient outcomes. Qualifications: • Education: Graduate of an accredited Radiologic Technology or MRI program, • Licensure: ARRT(MR) certification required, • Experience: 1 year of MR work experience required; high-field magnet experience is a must; GE high-field magnet experience preferred; Phillips and Siemens experience a plus; CT experience preferred, • Technical Skills:, • May be required to train in and perform remote MRI scanning., • Will be required to perform duties in or near areas containing specialized imaging equipment and must be able to adhere to all department and facility safety protocols. Key Responsibilities: • Perform MRI exams with accuracy and care using high-field magnets across multiple office locations, • Operate and maintain MRI imaging equipment according to established protocols on various equipment brands (GE, Phillips, Siemens), • Ensure patient safety and comfort throughout all procedures, including screening for MRI safety contraindications, • Train in and perform remote MRI scanning as required, • Adhere to all department and facility safety protocols, especially when working in or near areas containing specialized imaging equipment, • Maintain required certifications and stay current with industry standards, • Collaborate with radiologists and other healthcare team members as needed, • Utilize CT experience as a plus when applicable, • May be required to perform duties in or near areas containing specialized imaging equipment How to Apply: If you are ready to take the next step in your career and make a difference in the healthcare industry, we want to hear from you! Submit your Resume/CV to hr@glhstaffing.com or call our office at (800) 608-4025 to learn more about this opportunity and others we offer. Greenlife Healthcare Staffing- Empowering Healthcare Professionals, Enriching Lives

Job Description1. Equipment Operation & Maintenance • Perform routine inspection, preventive maintenance, calibration, and troubleshooting of automated sortation systems, conveyor systems, barcode scanners, DWS systems, and other material handling equipment., • Monitor equipment performance and operating parameters to ensure system availability and operational efficiency (target uptime of 98% or higher)., • Maintain accurate maintenance records and equipment documentation.2. Troubleshooting & Technical Support, • Respond quickly to equipment failures, system alarms, downtime, and operational issues., • Diagnose electrical, mechanical, PLC, and control system failures and implement corrective actions to minimize production interruptions., • Establish rapid response procedures to reduce equipment downtime and improve maintenance efficiency.3. Preventive Maintenance & Reliability Improvement, • Develop and execute preventive maintenance programs for automation equipment., • Manage spare parts inventory and track component life cycles., • Monitor key maintenance KPIs, including MTBF (Mean Time Between Failures), and continuously improve equipment reliability while reducing maintenance costs.4. Equipment Installation & Continuous Improvement, • Participate in the installation, commissioning, testing, and acceptance of new automation equipment., • Work closely with equipment vendors and engineering teams on system upgrades and process improvements., • Analyze equipment performance data and recommend energy-saving initiatives and operational optimization projects.5. Documentation & Training, • Develop standard operating procedures (SOPs), maintenance documentation, and emergency response procedures., • Provide technical training and guidance to operations and maintenance personnel on the proper operation and maintenance of automation equipment., • Promote standardized maintenance practices and continuous improvement initiatives. Requirements • Associate's degree or above in Electrical Engineering, Mechanical Engineering, Automation Engineering, Industrial Engineering, Logistics Engineering, or a related technical field., • Experience maintaining automated material handling systems, conveyor systems, or warehouse automation equipment., • Familiarity with cross-belt sorters, DWS systems, AGVs, barcode scanners, and other logistics automation equipment., • Strong knowledge of electrical systems, motor controls, sensors, drives, and industrial automation., • Experience with PLC programming and troubleshooting (Siemens, Mitsubishi, Allen-Bradley, or similar platforms)., • Ability to read and interpret electrical schematics and engineering drawings., • Proficiency with AutoCAD, EPLAN, or similar engineering software., • Basic understanding of industrial networking and TCP/IP communication is preferred., • Must be bilingual in Mandarin and EnglishExperience & Certifications, • Minimum 3 years of experience maintaining automated logistics equipment, warehouse automation systems, or industrial automation equipment preferred., • California Electrician Certification or equivalent electrical certification is preferred. Candidates without certification should be willing to obtain the required certification within a reasonable period after hire., • OSHA 10/30 certification is a plus. Benefits • Base Salary: 60k-100k + bonus （Negotiable base on experience）, • 7 PTO days, • 5 Paid Sick Leave Days, • 6 Paid Holidays, • 401K, • Medical insurance, Dental and Vision Insurance, STD/LTD

Job Description Automation PLC/SCADA Engineer Contract – NJ Shift: 2nd or 3rd shift (evenings or nights) Overview Seeking a hands-on Automation/Controls Engineer to support pharmaceutical manufacturing operations. The ideal candidate has a strong PLC/SCADA background within a GMP pharmaceutical environment and is comfortable troubleshooting automated manufacturing equipment on the production floor. This is a mid-level opportunity for someone with a solid engineering foundation who is still technically hands-on and interested in continuing to learn. Background • 4–10 years of pharmaceutical/biopharmaceutical automation experience, • Hands-on experience supporting manufacturing automation and controls systems, • Strong experience with PLC and SCADA systems, particularly Allen-Bradley and/or Siemens, • Experience troubleshooting across PLC, HMI/SCADA, instrumentation, electrical, software, and industrial networking, • Experience in GMP/cGMP manufacturing environments, • Background supporting equipment integration, commissioning, FAT/SAT, qualification, or capital projects, • Strong root-cause analysis and problem-solving capabilities, • Experience with sterile manufacturing or filling lines is highly preferred Requirements • 4–10 years of relevant pharmaceutical automation/controls experience, • Strong PLC programming/troubleshooting experience, • Strong SCADA/HMI experience (Ignition, iFix, WinCC, etc.), • Ability to troubleshoot and resolve automation issues on manufacturing equipment, • Working knowledge of GMP, automation validation, change control, investigations, and data integrity, • Experience with industrial networking and automation communication protocols is preferred, • Must be technically hands-on

The candidate selected for this position will: \n\n • The candidate selected for this position will promote a culture of healing, while accurately interpreting and performing all MRI imaging protocols\n, • The candidate will practice in accordance with state, federal and professional standards\n, • Must demonstrate knowledge of MR imaging equipment; including set-up, utilization, basic troubleshooting and proper care for all equipment\n, • Will abide by strict MR Safety standards and evaluate MR scans for technical quality\n, • EPIC and PACS will be used to manage patient workflow and transmit images for interpretation\n, • Must be competent with IV skills and preparing/administering contrast media\n\n Minimum Education: \n\n • Completion of a 24-month AMA approved School of Radiologic Technology required\n\n License/Certifications: \n\n • ARRT Certified\n, • BLS/CPR certification\n, • IV Certification preferred\n\n Relevant Experience: \n\n • 2 years MRI Experience, Siemens preferred\n About US\n\n \n At Atlantic Health, our promise to our communities is; Anyone who enters one of our facilities will receive the highest quality care delivered at the right time, at the right place, and at the right cost. This commitment is also echoed in the respect, development and opportunities we give to our more than 22,000 team members. Headquarters in Morristown, New Jersey, we are one of the leading non-profit health care systems in the nation. Our facilities and sites of care include: \n \n • Atlantic Health Morristown Medical Center, Morristown, NJ\n, • Atlantic Health Overlook Medical Center, Summit, NJ\n, • Atlantic Health Newton Medical Center, Newton, NJ\n, • Atlantic Health Chilton Medical Center, Pompton Plains, NJ\n, • Atlantic Health Hackettstown Medical Center, Hackettstown, NJ\n, • Atlantic Health Goryeb Children's Hospital, Morristown, NJ\n, • Atlantic Health CentraState Healthcare System, Freehold, NJ\n, • Atlantic Medical Group\n, • Atlantic Visiting Nurse\n, • Atlantic Mobile Health\n, • Atlantic Rehabilitation\n \n We have more than 900 community-based healthcare providers affiliated through Atlantic Medical Group. \n We have received awards and recognition for the services we have provided to our patients, team members and communities. Below are just a few of our accolades: \n \n • Chosen for 17 years by Fortune as one of the magazine’s “100 Best Companies to Work For." \n, • Atlantic Health Morristown and Atlantic Health Overlook Named by Newsweek as two of the “World’s Best Hospitals” in 2026.\n, • Atlantic Health Morristown and Atlantic Health Overlook ranked within the top three hospitals in New Jersey by U.S. News & World Report’s 2025-2026 Best Hospital rankings. \n, • Atlantic Health scored four “A” grades by The Leapfrog Group in its Fall 2025 Hospital Safety Grades, performance measures reflecting errors, accidents, injuries and injections, as well as systems hospitals have in place to prevent harm. \n, • Atlantic Health Morristown and Atlantic Health Overlook are New Jersey's only hospitals to be named among America's 50 Best hospitals by Healthgrades in 2026.\n, • Named by Becker's Healthcare as one of the "165 Top Places to Work in Healthcare – 2026.\n, • Atlantic Health Morristown, Atlantic Health Overlook, Atlantic Health Chilton and Atlantic Health Newton all Forbes Top Hospitals for 2026.\n, • Named by Newsweek as one of America’s Greatest Workplaces for Inclusion & Diversity 2025.\n, • Atlantic Health rated LEVEL 9 - 2025 CHIME Digital Health Most Wired. \n \n Named one of America's 50 Best Hospitals by Healthgrades, a World’s Best Hospital by Newsweek and recognized as a Best Regional Hospital in the NY Metro area by U.S. News & World Report. \n \n \n Our Atlantic Neuroscience Institute is the region’s leader in neuroscience care. A hub for the New Jersey Stroke Network, we offer a broad range of advanced neurological, neurosurgical and neurodiagnostic services. We are also certified as a Level IV Epilepsy Center and home to the Gerald J. Glasser Brain Tumor Center, where more brain tumor surgeries are performed than anywhere else in New Jersey. Our CyberKnife® program is the largest and most experienced in the state. We also have a satellite emergency department in Union, NJ, which treats about 40,000 emergency cases each year. \n \n \n Committed to providing exceptional care, Overlook Medical Center has achieved the prestigious Magnet® recognition. This designation from the American Nurses Credentialing Center is the highest national honor for nursing excellence. What’s more, Overlook Medical Center has advanced certification from The Joint Commission for perinatal care and is designated an Advanced Comprehensive Stroke Center. Additional Joint Commission-certified services include behavioral health care, spine surgery, wound care, and primary care medical home (PCMH). \n \n Atlantic Health offers a competitive and comprehensive Total Rewards package that supports the health, financial security, and well-being of all team members. Offerings vary based on role level (Team Member, Director, Executive). Below is a general summary, with role-specific enhancements highlighted: \n\n \n\n\n Team Member Benefits\n\n\n \n • Medical, Dental, Vision, Prescription Coverage (22.5 hours per week or above for full-time and part-time team members)\n, • Life & AD&D Insurance.\n, • Short-Term and Long-Term Disability (with options to supplement)\n, • 403(b) Retirement Plan: Employer match, additional non-elective contribution\n, • PTO & Paid Sick Leave\n, • Tuition Assistance, Advancement & Academic Advising\n, • Parental, Adoption, Surrogacy Leave\n, • Backup and On-Site Childcare\n, • Well-Being Rewards\n, • Employee Assistance Program (EAP)\n, • Fertility Benefits, Healthy Pregnancy Program\n, • Flexible Spending & Commuter Accounts\n, • Pet, Home & Auto, Identity Theft and Legal Insurance\n \n \n\n\n Note: In Compliance with the NJ Pay Transparency Act (effective Sunday, June 1, 2025), all job postings will include the hourly wage or salary (or a range), as well as this summary of benefits. Final compensation and benefit eligibility may vary by role and employment status and will be confirmed at the time of offer.\n\n \n EEO STATEMENT \n \n \n Atlantic Health, Inc. is an equal employment opportunity employer and federal contractor or subcontractor and therefore abides by applicable laws to protect applicants and employees from discrimination in hiring, promotion, discharge, pay, fringe benefits, job training, classification, referral, and other aspects of employment, on the basis of race, color, religion, sex (including pregnancy, gender identity and sexual orientation), national origin, citizenship status, disability, age, genetics, or veteran status. \n

Siemens is a Top 10 Global Software Company and a leader on Fast Company’s Most Innovative Companies in the World! With the acquisition of Mendix in 2018, Siemens Digital Industries Software is driving transformation to enhance the digital enterprise where engineering, manufacturing and electronic

Siemens offers a variety of health and wellness benefits to our employees. Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace. Our mission at Controlling and Finance Assurance (CF A) is to provide objective, factual and independent foresight to help Siemens be excellent

Siemens offers a variety of health and wellness benefits to our employees. Equal Employment Opportunity Statement Siemens is an Equal Opportunity Employer encouraging inclusion in the workplace.

Customer Service Project Manager Data Centers. Siemens Project Management Office (PMO) is looking for a Customer Services (CS) Project Manager to join our Data Centers team. Communication & Stakeholder Management: Communicate effectively with team members, stakeholders, and management, providing re

Tax Counsel – Siemens Transform the everyday with us! The Tax Counsel has the opportunity to lead key strategic initiatives focused on value creation through the analysis and execution of beneficial tax strategies. About Siemens We are a global technology company focused on industry, infrastructur

Airport Terminal Services - - Responsibilities: lift up to 70lbs per mail handling unit; sort, scan, load/unload USPS mail containers and Airline cans; follow all Safety rules and Regulations; work assigned schedules including weekends and holidays.

Cintas Corporation - - Responsibilities: Locate/count/sort customer orders; Build or prepare customer orders for loading onto trucks; Maintain cleanliness of work area; Meet quantity and quality standards.

Distribution/Materials Handler.The primary purpose of the Distribution/Materials Handler position is to receive and verify all incoming mail, packages, supplies, and other items and ensure prompt and accurate delivery of said items from the mailroom and receiving areas to the appropriate departments

Ryder is immediately hiring Warehouse Material Handler in Edison, New Jersey.Warehouse positions pay weekly.We want the right warehouse associate to join us at Ryder and work in the safest supply chain environment with state of the art equipment.Products being handled: Cosmetics and shampoos - retai

Under the direction of supervisor or manager, coordinates activities of workers engaged in lifting, transporting, storing and loading materials and products by use of conveyors, industrial trucks or by hand.Essential Duties and Responsibilities.Coordinates Material Handlers to ensure their time is u

Ryder is hiring a Warehouse Associate in Edison, New Jersey offering weekly pay, excellent benefits, and a career you can feel good about.Warehouse Positions Pay Weekly.Schedule: Tuesday - Friday 5:00 AM-2:30 PM and Saturday 4:30 AM-8:30 AM.Ryder Warehouse Associates work in clean, organized, and we

Material Handler, GWA- 2nd Shift.Location: USA - Carteret, Salt Meadow Rd Division: Solutions.Job area: Terminal/Warehouse/Transport.Position Summary: The General Warehouse Associate is responsible for picking, scanning, labeling, moving, staging, replenishing, and stacking product.This individual i

First Shift Available 7am-3:30pm.The Material Handler I performs several activities to help the Material Handler II and Warehouse Supervisor with warehouse operations.Material Handler I is responsible to understand their role in the Food Safety Management System by awareness of the importance and re

We are hiring experienced Forklift Operators for a warehouse position involving 100% material handling equipment (MHE) operation for loading and unloading pallets.As well as Perform Picking Order Duties.

The Material Handler supports production by accurately picking, staging, and delivering materials to manufacturing lines and rooms.This role operates a stand-up forklift, uses scan guns and computer systems for material transactions, and verifies quantities using strong math skills and attention to