Trabajos structural welding en North Bergen, New JerseyCrear alertas

Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Perform special inspections and field observations in accordance with NYC Building Code requirements, approved construction documents, project specifications, and applicable industry standards., • Verify that construction activities comply with approved plans, specifications, shop drawings, and regulatory requirements., • Conduct inspections of structural steel, reinforced concrete, masonry, fireproofing, mechanical systems, energy code compliance, and other assigned disciplines based on qualifications and certifications., • Document inspection activities, observations, test results, and deficiencies in clear, accurate, and timely inspection reports., • Identify non-conforming work, issue deficiency reports when required, and verify corrective actions through follow-up inspections., • Review construction drawings, specifications, approved RFIs, submittals, and related project documentation before and during inspections., • Coordinate with contractors, project managers, design professionals, testing laboratories, and client representatives to ensure inspection requirements are met., • Maintain complete and accurate inspection records in accordance with company Quality Management System (QMS), agency procedures, and project requirements., • Adhere to all company safety policies and site-specific safety requirements, including the proper use of Personal Protective Equipment (PPE)., • Support project scheduling requirements by responding to inspection requests and maintaining flexibility to perform inspections across multiple project site. Requirements Essential Skills and Experience: • Bachelor’s Degree in Engineering, • 10 years of experience as a minimum of related work experience performing special inspections onsite (Masonry, Concrete, Rebar, Bolting and Welding)., • ACI, ICC, CWI are required. PE is preferrable., • Proficiency with Microsoft Office Suite (Word, Excel, Outlook), electronic reporting systems, and construction management platforms such as Procore or similar applications., • Strong knowledge of NYC Building Code, applicable industry standards, and Special Inspection requirements., • Ability to interpret construction drawings, specifications, shop drawings, approved RFIs, and project documents., • Experience performing special inspections in accordance with NYC Department of Buildings (DOB) requirements and TR-1 responsibilities., • Current ICC Special Inspector certifications applicable to assigned inspection disciplines (Structural Steel and Bolting, Reinforced Concrete, Masonry, Fireproofing, Mechanical, Energy Code, etc.)., • Ability to accurately document inspection results, prepare detailed field reports, and identify deficiencies requiring corrective action., • Knowledge of quality management systems, inspection procedures, and documentation requirements., • Strong understanding of construction means and methods, materials, testing procedures, and workmanship standards., • Ability to independently evaluate code compliance and communicate findings to contractors, clients, and project stakeholders., • Effective verbal and written communication skills, including the ability to prepare concise and professional inspection reports., • Strong organizational skills, attention to detail, and ability to manage multiple inspection assignments while meeting project schedules.

Azar Design Co, a multidisciplinary architecture, engineering, surveying, environmental, and construction management firm with over 45 years of experience, is seeking experienced MEP professionals in design and construction to support various sitewide projects in NYC area. We are looking for highly qualified professionals with extensive experience delivering large-scale public infrastructure projects. The successful candidate will work closely with design professionals, construction managers, contractors, subcontractors, owners, and public agencies to ensure MEP systems are properly designed, coordinated, constructible, and successfully delivered in the field. Competitive salary commensurate with experience, qualifications, and level of responsibility. Key Responsibilities • Provide MEP engineering and construction support throughout all project phases., • Review MEP designs, drawings, specifications, and technical documents for constructability, coordination, and code compliance., • Review and coordinate mechanical, electrical, plumbing, HVAC, and fire protection systems., • Identify design conflicts, constructability issues, and potential field challenges and recommend solutions., • Review shop drawings, equipment submittals, RFIs, change orders, and technical specifications., • Support MEP equipment installation, replacement, rehabilitation, testing, commissioning, and turnover., • Coordinate mechanical equipment, piping systems, equipment anchorage, structural supports, bolting, welding, and related installation requirements., • Provide field engineering and technical support to construction teams., • Coordinate MEP systems with architectural, structural, civil, and other disciplines., • Support procurement and technical evaluation of MEP equipment and materials., • Perform field observations and verify that work complies with approved drawings, specifications, codes, and project requirements., • Assist with inspections, testing, commissioning, punch lists, documentation, and project closeout., • Maintain accurate project documentation using construction management and inspection platforms., • Collaborate with multidisciplinary design and construction teams to resolve complex technical and field issues. Minimum Qualifications • Bachelor's degree in mechanical engineering or a related engineering discipline from an accredited institution., • 8+ years of progressive MEP engineering and construction experience on large-scale commercial, institutional, transportation, infrastructure, or public-sector projects., • Demonstrated experience supporting design and/or construction teams., • Strong knowledge of NYC Mechanical, Electrical, Plumbing, Building, and Fire Codes., • Experience working with public agency standards and requirements, including SCA, DASNY, DDC, MTA, and Port Authority., • Strong ability to read and interpret construction documents, engineering drawings, specifications, MEP schematics, and shop drawings., • Experience with HVAC and mechanical systems, equipment installation, piping systems, equipment replacement, and rehabilitation., • Knowledge of construction means and methods, sequencing, procurement, and field coordination., • Strong technical documentation, communication, and problem-solving skills., • Ability to work effectively in fast-paced, multidisciplinary design and construction environments. Software Proficiency • AutoCAD, • Revit / BIM, • Procore, • Autodesk Construction Cloud / BIM 360, • E-Builder/Trimble, • Microsoft Office Suite Certifications & Preferred Qualifications • OSHA 10-Hour Certification, • OSHA 30-Hour Certification, • NYC SST 40-Hour Certification, • Professional Engineer (PE) license preferred, • NYC DOB experience preferred, • Experience on major public infrastructure or transportation projects preferred

Job Description Master Collision Repair Technician: Autobody & Frame Machine Expert Do you have a passion for restoring vehicles to their former glory? Are you meticulous, detail-oriented, and thrive in a fast-paced environment? If so, we want you! We are seeking a highly motivated and skilled Autobody Technician and Frame Machine Tech to join our growing team. In this exciting role, you will be responsible for a wide range of tasks, from diagnosing and repairing collision damage to aligning frames and ensuring flawless finishes. You will be our point person for restoring vehicles to pre-accident condition, exceeding customer expectations, and upholding our reputation for top-quality repairs. Responsibilities: • Diagnose and assess collision damage on vehicles, both structural and cosmetic., • Prepare detailed repair estimates and communicate effectively with customers to explain repairs and timelines., • Utilize frame machines and straightening equipment to precisely align vehicle frames to factory specifications., • Repair and replace damaged body panels, including welding, drilling, and riveting., • Apply body fillers, sand, and prep surfaces for flawless paint application., • Perform meticulous finish work, including masking, painting, and buffing to achieve a showroom-quality shine., • Maintain a clean and organized workspace, adhering to all safety protocols., • Stay up-to-date on industry advancements and best practices., • Contribute to a positive and collaborative team environment. Qualifications: • Minimum of 5 years of experience as an Autobody Technician and Frame Machine Tech., • Proven ability to diagnose, repair, and restore vehicles to pre-accident condition., • Strong working knowledge of frame alignment principles and techniques., • Proficiency in using a variety of autobody repair tools and equipment, including welders, grinders, and spray guns., • Excellent attention to detail and a commitment to quality craftsmanship., • Strong communication and interpersonal skills, including the ability to build rapport with customers., • Ability to work independently and as part of a team., • A valid driver's license and a clean driving record., • Certification in autobody repair and/or frame alignment a plus. Benefits: • Competitive salary and benefits package., • Opportunity to work on a variety of vehicles., • Positive and supportive work environment., • Career growth and development opportunities. If you are a skilled and passionate autobody technician with a talent for frame repair, we encourage you to apply! We offer a rewarding career opportunity in a fast-paced and dynamic environment. To Apply: Call 2017879606 Please submit your resume and cover letter. We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. \nCompany Description Family owned and operated Family owned and operated

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems. Key Responsibility Areas: • Contribute to the design and development of primary and secondary mechanical fusion components and subsystems, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principals with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Experience designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience specifying machining, welding, and/or fabrication requirements, • Ability to decompose and solve complex problems, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTO It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Job description: At 20/20, we are leaders in Special inspections & Testing across the Tri-State area, offering top-notch city, national, and international code testing and inspections. Our expertise goes beyond standard safety checks; we specialize in unique and intricate projects with a commitment to excellence. Our cutting-edge on-site laboratory and dedicated technical team ensure that every project benefits from unparalleled accuracy and precision. We are seeking a skilled Special Inspectors to join our dynamic team. In this role, you will be ensuring the structural integrity and safety of steel and concrete construction through your inspections. PAY RANGE: $26.00 – $55.00 per hour Key Responsibilities: • Perform special inspections onsite (Masonry, Concrete, Rebar, Mechanical, Bolting and/or Welding)., • Collaborate with contractors, project managers, and clients to ensure inspections are performed accurately and efficiently., • Prepare and review inspection reports in a timely manner., • Report Non-Conformance items. Qualifications: • Any special inspector certifications from the following: ICC, CWI, NICET, ACI, • OSHA 10., • Bachelor's degree in Civil or Structural Engineering preferred, • Experience: Entry Level or Experienced Benefits: • PTO and Holidays., • Medical, Dental, and Vision insurance., • Travel reimbursement for select projects., • Robust career advancement program., • Bonuses based on performance. 20/20 Inspections & Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. \nCompany Description 20/20 provides expert engineering building solutions covering the Tri-State area for all required and applicable city, national and international code testing and inspections. Our professional services go beyond the day-to-day application of ensuring safety and building code compliance. Our technical team further enhances our industry specific needs with specialty and other out of the ordinary services. Our state-of-the-art laboratory is meticulously operated with accuracy, precision and equipment that has the capacity to service large scale, intricate or unique projects. We partner with design professionals throughout the development, planning and construction phases of a project to facilitate their understanding, interpretation and application of code. Such collaboration results in a cohesive, well-planned and sustainable path to a successful project. 20/20 provides expert engineering building solutions covering the Tri-State area for all required and applicable city, national and international code testing and inspections. Our professional services go beyond the day-to-day application of ensuring safety and building code compliance. Our technical team further enhances our industry specific needs with specialty and other out of the ordinary services.\r\n\r\nOur state-of-the-art laboratory is meticulously operated with accuracy, precision and equipment that has the capacity to service large scale, intricate or unique projects.\r\n\r\nWe partner with design professionals throughout the development, planning and construction phases of a project to facilitate their understanding, interpretation and application of code. Such collaboration results in a cohesive, well-planned and sustainable path to a successful project.

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid driver’s license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect Flexible work from home options available.

Job Description Mechanical Engineer Mechanical Engineer – Mid-Level Reports To: Mechanical Engineering Manager We are seeking a Mechanical Engineer to take ownership of the design, engineering, documentation, and technical support of assigned mechanical projects. This is a hands-on role requiring strong knowledge of machine design, power transmission, manufacturing, fabrication, and mechanical systems. The ideal candidate can take a project from specification and concept through design, fabrication, testing, and final documentation while working closely with Sales, Drafting, Electrical Engineering, Production, and Service. Background Requirements • Bachelor of Science degree in Mechanical Engineering., • 3–7 years of relevant mechanical engineering experience, preferably in machine design, industrial equipment, or manufacturing., • Strong background in machine design and power transmission technologies., • Working knowledge of sheet metal fabrication, structural steel, welding, shop fabrication processes, and manufacturing methods., • Understanding of strength of materials, thermodynamics, fluid dynamics, and mechanical engineering principles., • Practical experience with AutoCAD; experience with Autodesk Inventor is preferred., • Strong understanding of engineering drawings, tolerances, materials, components, and manufacturing processes., • Strong analytical, problem-solving, organizational, and communication skills. Primary Responsibilities • Take full responsibility for the engineering and design of assigned mechanical projects, from initial specifications through production, testing, and project closeout., • Review machine specifications for completeness, technical feasibility, and manufacturability., • Perform engineering calculations to determine equipment requirements and support sound component, machine, and feeder design., • Create or direct the creation of layouts, sketches, detail drawings, assembly drawings, approval drawings, and 3D models., • Work closely with the Drafting Department to ensure drawings are accurate, complete, and meet engineering requirements., • Review completed drawings for accuracy, dimensions, tolerances, and technical content., • Create and maintain accurate Bills of Materials (BOMs) and engineering documentation., • Specify, document, and procure non-stock and buy-out components., • Recommend product improvements and manufacturing methods that improve quality, performance, reliability, cost, or manufacturability., • Coordinate with Electrical Engineering on electro-mechanical design and integration issues., • Support Sales with technical information, project requirements, and customer-related engineering questions., • Prepare drawing transmittals and approval documentation for customer review., • Work directly with Production to resolve engineering issues and provide assembly instructions, drawing clarifications, and technical support., • Perform periodic in-process fabrication and assembly inspections to ensure work meets engineering requirements., • Perform incoming inspections of specialty buy-out components., • Perform final inspections of completed equipment and ensure all equipment documentation is accurate and up to date., • Provide technical assistance to the Service Department, particularly during equipment testing and commissioning., • Close out assigned projects and provide all required documentation to Sales in a timely manner., • Maintain accurate records of project work and time spent on assigned tasks., • Follow all company policies, procedures, engineering standards, and safety requirements. What Makes You a Great Fit You are a practical, hands-on engineer who understands that good mechanical design must work in the real world. You can move comfortably between engineering calculations, CAD drawings, the production floor, and conversations with customers, suppliers, drafters, and technicians. You take ownership of your projects, pay attention to detail, solve problems quickly, and look for ways to make equipment safer, more reliable, easier to manufacture, and more cost-effective. What We Offer • Competitive salary and benefits package., • Professional growth opportunities in a collaborative team environment., • Exposure to diverse, technically challenging projects., • Supportive workplace culture with opportunities for mentorship and leadership., • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We are privately owned with an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base package + bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team - YOU! Mechanical Engineer | Mid-Level Mechanical Engineer | Mechanical Design Engineer | Machine Design | Mechanical Design | Power Transmission | AutoCAD | Autodesk Inventor | Industrial Equipment | Machine Engineering | Manufacturing | Sheet Metal Fabrication | Structural Steel | Welding | Mechanical Systems | Engineering Drawings | CAD | BOM | Bills of Materials | DFM | Design for Manufacturing | Quality Inspection | Equipment Design | Electro-Mechanical Systems | Product Improvement Looking forward to getting to know you… We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for structural and thermo-mechanical design, manufacturability, development, and commissioning of these systems. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems. Key Responsibility Areas: • Have ownership of the design and development of primary and secondary mechanical fusion components and subsystems, • Work with core system-level development teams to define prototyping requirements, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principles with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholders, • Mentor junior engineersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Minimum of 5 years of experience, • Extensive experience as a lead designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Management of complex assemblies with multiple contributors, • Experience specifying machining, welding, and/or fabrication requirements, • Ability to mentor junior engineers in methods to decompose complex problems, and review that work, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Experience owning systems or complex sub-systems, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s ownIt’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Position Overview\n \n Fab-Tech Steel Group is seeking an experienced Miscellaneous Steel Shop Foreman to oversee projects from initial planning and field measurement through fabrication, finishing, delivery, and installation. The ideal candidate will have strong experience in miscellaneous steel fabrication, shop supervision, field coordination, and project tracking. \n Responsibilities\n \n\n • Manage miscellaneous steel projects from inception through installation.\n, • Review architectural, structural, and approved shop drawings.\n, • Complete site visits and accurately take field measurements.\n, • Coordinate measurements and project information with in-house detailers for shop drawings and piece details.\n, • Review fabrication drawings for accuracy and constructability.\n, • Prepare material takeoffs and order steel, hardware, supplies, and finishing materials.\n, • Schedule, assign, and supervise daily shop labor.\n, • Ensure employees work safely, efficiently, and according to project schedules.\n, • Track fabrication progress and adjust priorities as needed.\n, • Perform quality-control inspections on dimensions, welds, fit-up, hardware, and finishes.\n, • Coordinate galvanizing, powder coating, painting, deliveries, and installation activities.\n, • Maintain project schedules, production trackers, material logs, and punch lists.\n, • Identify and resolve material shortages, fabrication issues, field conflicts, and scheduling delays.\n, • Maintain a safe, clean, and organized fabrication shop.\n, • Provide regular project updates to company management.\n\n Qualifications\n \n\n • Minimum of 5 years of experience in miscellaneous steel, structural steel, architectural metal, or a related fabrication environment.\n, • Previous foreman or shop-supervision experience preferred.\n, • Ability to read architectural, structural, shop, and fabrication drawings.\n, • Strong field-measuring and site-verification skills.\n, • Knowledge of welding, fitting, cutting, drilling, grinding, and finishing processes.\n, • Experience with railings, stairs, ladders, gates, dunnage, platforms, supports, and similar steel products.\n, • Strong leadership, organizational, scheduling, and problem-solving skills.\n, • Ability to manage multiple projects and changing priorities.\n, • Basic proficiency with email, Microsoft Excel, and project-tracking tools.\n, • Valid driver’s license and ability to travel to project sites throughout New York City and the Tri-State area.\n, • OSHA and applicable welding or safety certifications are preferred.\n\n \n Fab-Tech Steel Group, Inc. is an equal opportunity employer.

ABOUT KGBL \n KGBL designs and manufactures unapologetically modern, meticulously handcrafted furniture \n and objects in our Brooklyn workshop. Our work spans fine furniture, custom millwork, and \n architectural projects, built across wood, metal, glass, stone, and upholstery. \n THE ROLE \n We're looking for a skilled metal worker/welder to join our Brooklyn shop, working primarily in \n non-ferrous metals with some related work in steel or stainless steel. Expertise in TIG welding \n metals is essential to the position. This is hands-on fabrication and finishing work on furniture \n and objects built to a high standard — precision, clean joinery, and refined surface finishing are \n central to the job. \n The ideal candidate comes from a fine furniture or sculpture background, where craft and finish \n quality carry the same weight as structural soundness. \n RESPONSIBILITIES \n – Fabricate and weld furniture components and structures in non-ferrous metals with related \n welding work in gin aluminum and steel \n – Perform precision welding to a high cosmetic standard, not just structural \n – Polish and finish metal surfaces — satin, brushed, and polished finishes across multiple \n metals \n – Read and work from shop drawings and templates with tight tolerances \n – Work to coordinate and assemble metal components with wood, glass, and stone elements \n – Maintain a clean, organized, safe metal shop area \n – Collaborate with the shop team on production timelines and sequencing \n QUALIFICATIONS \n – Experience welding non-ferrous metals with related welding work in gin aluminum and steel \n – Background in fine furniture fabrication or sculpture — comfortable with craft-level \n standards, not just structural welding \n – Strong metal finishing and polishing skills \n – Ability to work precisely from drawings and templates \n – Reliable, detail-oriented, and comfortable in a small shop environment \n DETAILS \n Location: Brooklyn, NY workshop \n Compensation: $25–$35/hour, based on experience \n

Job Description:\n\nDOT Construction is seeking an experienced, hands-on Working Workshop Lead to oversee daily operations within our construction workshop and fabrication area while actively working alongside the crew. This is a working leadership position. The Workshop Lead is expected to remain on the tools, lead by example, lay out work, fabricate components, review drawings, train craftsmen, solve fabrication issues, inspect finished products, and ensure that everything produced in the workshop meets DOT Construction quality standards. The Workshop Lead will coordinate daily shop production, manpower, materials, tools, equipment, fabrication sequencing, quality control, safety, housekeeping, inventory, and preparation of completed work for delivery to active construction projects. The ideal candidate understands how to build high-quality work and how to lead others in producing it consistently. Hands On Workshop Leadership Lead the Shop From the Floor Take ownership of daily workshop operations and ensure fabricated products are completed safely, accurately, efficiently, and to a professional commercial-construction standard. Be a Working Lead Work alongside the crew and participate directly in the production activities required to meet project schedules and quality expectations, including: · Construction layout and measurement · Cutting, fitting, fabrication, and assembly · Finish carpentry, cabinetry, millwork, and architectural woodwork · Metal fabrication and miscellaneous steel work where applicable · Drilling, fastening, hardware installation, sanding, and surface preparation · Specialty construction assemblies, mockups, prototypes, and prefabricated field assemblies · Repairs, modifications, punch-list corrections, and preparation for field installation Lead by Example Set the standard for craftsmanship, accuracy, productivity, professionalism, safety, organization, cleanliness, material care, tool care, and accountability. The Workshop Lead should not accept work that fails to meet the approved drawings or DOT Construction quality standards. Craftsmanship and Quality Control Build It Right Before It Leaves the Shop DOT Construction expects a high level of craftsmanship from every product fabricated within the workshop. Quality must be maintained throughout the fabrication process, not checked only after production is complete. The Working Workshop Lead will establish and maintain a shop culture in which craftsmen take pride in the finished product. Responsibilities include: · Review drawings, details, and approved submittals before fabrication begins. · Verify dimensions before materials are cut and confirm field dimensions when required. · Verify material type, thickness, grade, finish, grain, and orientation. · Establish and enforce fabrication tolerances. · Check squareness, level, plumb, alignment, fit, joint quality, and consistent reveals. · Verify fastener type, spacing, placement, and attachment methods. · Inspect exposed finished surfaces and prevent scratches, dents, chips, gouges, poor cuts, glue residue, and excessive weld marks. · Verify hardware placement and confirm completed assemblies operate correctly. · Check finished dimensions before shipment and require immediate correction of deficient work. · Protect completed products from damage and perform a final quality-control inspection before release to the field. Nothing should leave the DOT Construction workshop unless it is ready to be installed and presented to the owner, architect, or client with confidence. Construction Drawing and Shop Drawing Review Know What You Are Building Before Cutting Material The Working Workshop Lead must be comfortable reading and interpreting construction information, including: · Architectural and structural drawings · Interior elevations, wall sections, and construction details · Finish, door, and hardware schedules · Millwork, shop, and fabrication drawings · Manufacturer instructions and approved product data · Submittals, RFIs, addenda, field sketches, and project specifications · Verified field dimensions and installation requirements The Workshop Lead must compare drawings, measurements, materials, and fabrication requirements before materials are cut or assemblies are built. When information appears incomplete, conflicting, or incorrect, follow this process: · Stop the questionable fabrication before material is wasted. · Verify the drawing, detail, field condition, or dimension. · Document the discrepancy clearly. · Notify the Project Manager or Superintendent. · Obtain direction or clarification before proceeding. · Resume fabrication after the requirement is understood and documented. The Workshop Lead is expected to identify problems before they become wasted material, rework, schedule delays, or field installation problems. Production Planning and Workflow Know What Needs to Be Built Next The Working Workshop Lead must understand what the crew is building today and what will be required over the coming weeks. Responsibilities include: · Review upcoming fabrication requirements and approved production information. · Establish daily and weekly production goals. · Prioritize fabrication according to project schedules and field installation needs. · Coordinate regularly with Project Managers and Superintendents. · Determine manpower needs and assign work according to employee skill level. · Confirm required materials, approved drawings, and field dimensions are available. · Identify long-lead materials and production constraints early. · Sequence fabrication, finishing, staging, and delivery efficiently. · Develop recovery plans when production begins falling behind. · Prevent field crews from waiting on shop-fabricated materials whenever reasonably possible. A successful Workshop Lead should understand tomorrow's workload and prepare the crew, materials, tools, and information required to execute it. Crew Leadership and Training The Working Workshop Lead will supervise craftsmen, helpers, laborers, and other employees assigned to the workshop. Responsibilities include: · Assign daily work and explain fabrication requirements clearly. · Demonstrate proper construction and fabrication techniques. · Train less experienced employees and develop their ability to work independently. · Inspect work during fabrication and correct poor workmanship immediately. · Establish reasonable production expectations and monitor employee productivity. · Teach proper tool usage and reinforce safe work practices. · Maintain professional conduct and accountability throughout the shop. · Identify employees capable of taking on greater responsibility. The Workshop Lead must be capable of teaching the work as well as performing it. When an employee does not understand how an item should be built, the Lead should demonstrate the correct method. Material Management Treat Materials Like Company Money Material waste directly affects project profitability. The Working Workshop Lead will maintain control of shop materials and ensure employees use them responsibly. · Review material requirements and quantities before fabrication. · Coordinate purchasing needs with Project Management. · Inspect incoming materials for damage, conformity, and usable condition. · Organize and protect lumber, sheet goods, metals, hardware, finished materials, and specialty products. · Maintain usable remnants when practical and plan cuts to maximize material yield. · Separate damaged, nonconforming, or rejected materials. · Track specialty materials and identify shortages early. · Prevent employees from cutting expensive material before dimensions and requirements are confirmed. Tools and Equipment The Workshop Lead will help maintain accountability for company tools, shop equipment, and fabrication machinery. Equipment may include: · Table saws, miter saws, track saws, circular saws, band saws, and chop saws · Drill presses, routers, sanders, planers, jointers, grinders, and metal-cutting equipment · Welding equipment, compressors, pneumatic tools, and cordless tools · Clamps, layout equipment, levels, lasers, jigs, and specialty fabrication equipment · Forklifts, pallet jacks, ladders, portable lifts, and other material-handling equipment Responsibilities include maintaining tools in safe operating condition, keeping machine guards in place, removing damaged tools from service, maintaining organized storage, preventing avoidable loss, coordinating maintenance, tracking consumables, and ensuring employees use the correct tool for each task. Prefabrication and Field Support A major function of the DOT Construction workshop is to support active project teams. The Workshop Lead may oversee fabrication of: · Custom blocking, backing assemblies, wood framing assemblies, and temporary construction components · Architectural trim, millwork, cabinetry, shelving, casework, and finish components · Door and hardware modifications, equipment supports, specialty brackets, and metal frames · Miscellaneous steel items, equipment stands, protective barriers, templates, and jigs · Mockups, prototypes, and project-specific fabricated assemblies Shop fabrication should make field installation faster, cleaner, safer, and more predictable. Completed work must be clearly identified, protected, and prepared for efficient installation. Mockups and Prototypes Before repetitive fabrication begins, the Working Workshop Lead may be required to produce a first-piece assembly, prototype, or mockup to verify: · Dimensions, materials, appearance, fit, and finish · Hardware, attachment methods, fabrication sequence, and installation requirements Once approved, the accepted mockup establishes the quality standard for the remaining production run. Repeated fabrication must remain consistent with that standard. Finish Quality Special attention must be given to items that will remain visible after construction is complete. Finished work should be exhibited: · Straight cuts, clean edges, tight joints, and smooth transitions · Consistent reveals, uniform spacing, proper alignment, and accurate dimensions · Correct fastener placement with minimal exposed fasteners where they are not intended · Professional surface preparation and a clean, consistent finish · Properly installed hardware and correct fit, function, and operation The completed work must withstand close review and reflect professional commercial-construction craftsmanship. Safety Management Maintain a Professional and Safe Workshop The Working Workshop Lead is responsible for maintaining a safe workshop environment. Responsibilities include: · Enforce DOT Construction safety requirements and applicable OSHA standards. · Require proper personal protective equipment and safe machine operation. · Maintain guards, electrical connections, clear walkways, access, and egress. · Control sawdust, sparks, fabrication debris, cords, hoses, and trip hazards. · Maintain safe material stacking, lifting practices, and material-handling operations. · Keep fire extinguishers accessible and store flammable materials correctly. · Remove damaged tools and equipment from service. · Conduct or participate in toolbox talks and correct unsafe conditions immediately. Production goals never justify unsafe work. The Workshop Lead is expected to plan the work so employees can meet quality and schedule requirements safely. Workshop Organization and Housekeeping The condition of the shop reflects the quality and discipline of the company. The Working Workshop Lead will maintain: · Clean workstations and defined fabrication areas · Organized tools, material racks, hardware storage, cords, and hoses · Clear aisles, access routes, exits, and loading areas · Proper scrap disposal and regular removal of waste · Protected finished-product storage and clearly identified staging areas · Orderly storage for ladders, portable equipment, and material-handling devices Housekeeping is part of daily production. Work areas should be reset throughout the day and ready for the next operation. Shipping Staging and Delivery Preparation Before fabricated materials leave the shop, the Working Workshop Lead will ensure they are properly prepared for transportation and field installation. Responsibilities include: · Complete the final quality-control inspection and verify quantities. · Confirm the project destination and installation location. · Label components and match loose hardware to the correct assemblies. · Protect exposed finishes and package items to prevent transportation damage. · Coordinate loading sequence, delivery timing, and field receiving requirements. · Provide applicable installation drawings, templates, or information with specialty assemblies. Products should arrive at the jobsite ready to be installed, with deficiencies corrected before shipment. Communication and Documentation The Workshop Lead will maintain regular communication with DOT Construction Project Managers and field Superintendents regarding: · Daily production status and completed quantities · Upcoming fabrication and delivery requirements · Material shortages, deliveries, and long-lead concerns · Drawing conflicts and outstanding field dimensions · Equipment issues and manpower requirements · Quality concerns, rework, and corrective action · Schedule concerns, change-order fabrication, and delivery readiness · Shop photographs and other required production documentation When a fabrication issue may affect project cost, quality, or schedule, the Workshop Lead must communicate it promptly and provide enough detail for Project Management to act. Extra Work and Change Management The Workshop Lead must recognize when requested fabrication may fall outside the original project scope. When additional work is requested: · Identify and describe the requested work. · Notify the Project Manager before proceeding whenever possible. · Document labor, materials, and equipment used. · Take photographs and maintain fabrication records when appropriate. · Obtain proper direction and track the work to completion. Shop labor and material have value and must be documented accurately. What We Look for inWhy Join DOT Construction in South Texas? \r\nThe South Texas commercial and industrial construction market continues to grow, and DOT Construction has a strong, multi-year project pipeline. We are looking for experienced craftsmen and construction professionals who want a long-term opportunity, steady work, and a defined career path with a growing contractor.\r\n\r\nOur workshop supports field operations by producing high-quality fabricated components, assemblies, architectural finishes, specialty items, and project-specific materials before they are delivered to the jobsite.\r\n\r\nQuality craftsmanship matters at DOT Construction. We are seeking a skilled construction professional who takes pride in producing clean, accurate work and understands that every item leaving the workshop represents the quality of our company.\r\n\r\nWorking in Texas also means zero state individual income tax and a competitive cost of living, providing an excellent opportunity for experienced construction professionals interested in relocating to South Texas.

Job Description We are hiring a Welder/Metal Fabricator for their Metal Fabrication company. The Welder/Metal Fabricator will be involved in all parts of the fabrication process, from raw material to finished product. This is a Temp to Perm opportunity, with company benefits once converted to Direct Hire. The Welder/Fabricator will have the opportunity to fabricate high profile projects throughout New York City! Welder/Metal Fabricator Responsibilities • Cut, assemble, and weld metal components for stairs, railings, and other structural projects using provided blueprints and specifications., • Review drawings and completed work to identify errors, troubleshoot issues, and ensure accuracy and quality standards are met., • Work independently and with team members to complete projects efficiently and within established timelines., • Assist with the handling, movement, and organization of materials throughout the fabrication facility. Welder/Metal Fabricator Requirements • Minimum 3 years of welding and fabrication experience, • Ability to read and interpret blueprints and technical drawings, • Strong attention to detail and commitment to quality workmanship, • Ability to work independently as well as collaboratively within a team environment Welding Test will be administered as part of the interview process Schedule: Monday – Friday Hours: 7am – 3:30pm (Overtime Availability) Pay: $21- $34/hr. depending on experience

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 9fV7OtpanF

Job Description\n \n \nThe Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade.\n \n \nFor the Welding Program, the Trades Instructor will provide instruction in welding theory, blueprint reading, metal fabrication, welding safety, and hands-on welding applications including SMAW (Stick), GMAW (MIG), GTAW (TIG), and FCAW welding processes. The instructor will prepare students for entry-level employment opportunities within the welding and fabrication industry.\n \n Compensation: $51,432/yr\n \n Responsibilities: \n \n\n • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades and welding applications.\n, • Teach students proper welding techniques including SMAW (Stick), GMAW (MIG), GTAW (TIG), and FCAW welding processes.\n, • Demonstrate cutting, grinding, fitting, fabrication, and metal preparation procedures.\n, • Instruct students on blueprint reading, weld symbols, measurements, layout procedures, and welding specifications.\n, • Teach students proper use and maintenance of welding machines, torches, grinders, plasma cutters, and fabrication tools.\n, • Explain and demonstrate welding safety standards, OSHA regulations, PPE requirements, and safe shop practices.\n, • Evaluate weld quality and demonstrate proper inspection and testing methods to determine weld soundness and structural integrity.\n, • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly.\n, • Explains and demonstrates jobs and tasks to be performed.\n, • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student.\n, • Schedules, organizes, and provides supplemental training when necessary.\n, • Conducts refresher training and make-up sessions when necessary.\n, • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety.\n, • Guides, assigns, schedules, and supervises the work of students; ensures work is completed in accordance with assigned curriculum.\n, • Ensures each assigned student follows all safety standards.\n, • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner.\n, • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards.\n, • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school.\n, • Participate and successfully complete all professional development sessions as required by accrediting and state standards.\n, • Participate in all individual career development sessions as required.\n, • Maintain trades licenses and certifications as needed per state and accrediting standards.\n, • Functions as an ambassador and liaison for Apex Technical School.\n, • Contributes to organization success by accepting new assignments, helping team members, learning new skills, and striving to improve team results.\n\n \n Qualifications: \n \n \nJob qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below:\n \n Education:\n \n \nHigh School Diploma or equivalent\n \n Equipment Skills:\n \n\n • Thorough understanding of the correct and safe operation of welding and fabrication tools and equipment.\n, • Use of safety equipment/apparel including welding shields, gloves, respirators, and protective clothing.\n\n \n Software Skills:\n \n\n • Microsoft Office Suite\n, • Google Classroom\n\n \n Required Experience: \n \n \nMinimum of 3 years' experience in welding, fabrication, or related skilled trades.\n \n About Us\n \n \n Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. \n \n \nApex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. \n \n Website: https://apexschool.com/

Job Description Structural Steel, Miscellaneous Iron, and Stair Contractor is seeking an in-house employee to supervise our steel fabrication shop and yard operations. Primary Responsibilities: • Supervise and coordinate the daily activities of union steel workers, • Read and utilize blueprints/drawings to prepare work plans, • Established and adjust work sequences to meet schedules, • Assist workers in performing tasks such as welding, bolting, chipping and using power tools, • Supervise material handling, rigging and truck loading, • Maintain time and safety records, • Preparing material and equipment for shipment to various jobsite, • Organizing trucking schedules Essential Job Functions: • Coordinate activities with ECIW’s union field forces, • Maintain equipment, tools and consumables, • Analyze and resolve work problems., • Provide leadership in setting safety, production, and conduct examples, • Additional miscellaneous, incidental, or similar duties which may be required from a day-to-day supervisor Work Experience Requirements • Familiarity with steel members, erection equipment and tools, • Ability to read drawings and material lists, • Ability to safely rig material and equipment, • Experience in a steel fabrication shop, • Management experience Competitive pay and benefits offered.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Special Inspector – AWS CWI / ICC Welding - NY Reports to: Project Manager Technical Responsibilities: • Inspect weldments to ensure compliance with applicable codes, standards, and specifications, • Review welding procedure specifications (WPS), welder qualification records, and inspection reports prior to the start of welding activities, • Verify compliance with contract documents, submittals, and construction drawings, • Oversee non-destructive testing (NDT) and ensure proper materials and procedures are in place, • Identify and report non-conformance issues (NCRs) to contractors and clients in a timely manner, • Prepare and submit detailed daily inspection reports, • Maintain accurate documentation of all inspection activities and findings, • Coordinate with project teams, contractors, and clients to ensure quality and compliance Applicable Building Codes: • BC 1704.3.1, • BC 1704.17, • BC 1704.18, • BC 1704.26 Requirements: Professional Experience & Education\Certifications: • AWS Certified Welding Inspector (CWI) OR ICC Structural Steel & Welding Special Inspector Certification, • Entry-Level (3-5 years) or Mid-Level (6-9 years) with welding inspection experience, • Bachelor’s degree in engineering, Architecture, or related field (preferred), • Strong knowledge of welding codes, standards, and inspection procedures, • Excellent attention to detail and documentation skills Physical & Additional Requirement: • This position requires physical ability to perform field inspections, • Ability to work in diverse weather conditions, • Extended periods of standing and walking, possibly on uneven or challenging terrains, • Climbing, bending, kneeling, • Working long hours & Lift and carry up to 25 lbs., • Valid, clean driver’s license & must have a personal vehicle and be willing to travel daily to project sites across the NYC metro area, • Ability to transport inspection and testing equipment as needed KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Overview: Shift: Monday-Friday 7:00 AM - 4:30 PM Pay Rate: $28.00-$32.00 per hour Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The A Welder / Fabricator is a senior-level technician responsible for high-quality welding, fabrication, and structural rebuilding of steel containers and compactors. This role requires advanced skills in MIG and stick welding and custom fabrication. The A Welder works independently on complex repair tasks and supports the training and development of entry-level team members. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform advanced MIG welding, stick welding and metal fabrication on a variety of container types and compactor components., • Rebuild or replace structural frames, bottoms, lids, caster brackets, and mechanical parts using custom-cut steel., • Interpret repair orders and/or sketches to execute precise rebuilds or modifications., • Use cutting torches, plasma cutters, grinders, and bending tools to shape and prepare materials., • Lead fabrication of specialized equipment or container configurations as needed for customer orders., • Perform quality control checks to ensure all welds meet company standards., • Mentor and train junior welders and assist with onboarding of new hires., • Maintain clean and organized welding area and perform basic preventative maintenance on shop tools., • Track parts used and time spent on custom or complex builds for cost analysis., • Collaborate with supervisors Requirements and Qualifications::, • Minimum 3–5 years MIG welding, stick welding and fabrication experience in industrial or structural repair settings., • Proven ability to perform precise welds in various positions and on worn or contaminated metal., • Advanced skills using fabrication tools including shears, brakes, torches, and weld jigs., • Self-motivated and capable of leading complex projects with minimal supervision., • Strong safety awareness and adherence to PPE and shop protocols., • Ability to lift heavy materials, work outdoors in all weather conditions, and operate yard equipment as needed. Work Environment This role involves working in a combination of indoor shop and outdoor yard environments. Frequent exposure to welding heat, welding fumes, grinding dust, metal shavings, and heavy lifting is expected. Welding hood, gloves, respirator (when applicable), safety glasses, steel-toe boots, and hearing protection are required daily. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a state-of-the-art rail served landfill located in Ohio. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employees, customer and environmental safety. What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture. Essential Job Summary:: The Entry-Level B Welder is responsible for performing basic welding and repair tasks on steel waste containers and compactors. This position focuses on structural reinforcement, minor fabrication, and the restoration of worn or damaged units under supervision. The B Welder must be reliable, safety-conscious, and eager to learn and grow in a fast-paced industrial environment. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Perform MIG welding, stick welding and torch cutting on steel containers and compactors following basic repair instructions., • Assist in structural repairs such as lid attachment, bottom plate patching, caster bracket welding, and frame reinforcement., • Grind and clean welds to ensure proper finish and functionality., • Operate hand tools and basic fabrication equipment under supervision., • Support the team in container inspections and identification of weld-related defects., • Adhere to all company safety policies and welding procedures., • Maintain a clean and organized work area and assist in equipment maintenance., • Report any material shortages, damaged equipment, or safety hazards to supervisor promptly., • Document completed repairs and work performed when required., • Assist senior welders or fabricators on more complex builds as needed. Requirements and Qualifications::, • Basic MIG welding, stick welding and torch cutting experience or completion of a welding training program., • Ability to follow verbal instructions, work orders, or simple repair sketches., • Understanding of basic hand and power tools used in metal repair., • Physically capable of lifting heavy parts, standing, bending, and working in indoor and outdoor conditions., • Strong work ethic, willingness to learn, and ability to work well with others., • Commitment to safety and quality workmanship at all times., • Bilingual (English/Spanish) a plus but not required., • Working outdoors and in a shop environment., • Exposure to welding fumes, sparks, grinding dust, noise, and heavy materials is expected., • PPE including welding hood, gloves, boots, and eye protection will be provided and required at all times. Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $26.31/Hr. Salary Range Maximum: USD $26.31/Hr.

We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction,

ICC Structural Welding Special Inspector or AWS Certified Welding Inspector (CWI) (preferred). ICC Structural Steel and Bolting Special Inspector. EDG is seeking a Special Inspector with strong technical expertise and leadership ability to join our team.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Foreman/Tank Builder Job Duties: • Foreman are responsible for providing site supervision and site-based senior leadership of a PTS construction project. • Acts as point of contact with customer, vendors and subcontractors on site., • Works to maintain Safety, Quality and Productivity., • The Field Foreman is responsible for understanding the contract scope of work and for the identification of field-initiated scope changes (change orders). • Provides leadership regarding Safety on the jobsite. Fosters a Safety Culture within the crew., • Provides leadership regarding Quality on the jobsite. Eliminates “go-backs”, rejected or sloppy work. • Enhances field productivity. Consistently perform projects under budget and on time., • Balances customer satisfaction with profitability of the project. Keeps customers happy yet protects the company regarding scope changes and barrier time. • Provides craft knowledge and experience to the crew. Expertise in several areas of PTS specialty work (welding, structural erection, tank repair, new tank construction, rigging etc.) • Evaluates field employees and identifies those who are candidates for promotion. Provides guidance and training to assist in their development. Communicates the employee evaluation information to Construction Managers and HR. • Assists Construction Managers and HR in recruiting field workers., • Responsible for the care and maintenance of all tooling and equipment, and immediately calling equipment off rent when no longer needed • Utilizes experience and skills to identify opportunities for improvement of company practices and resources. • Represents PTS in a professional, positive light to customers and employees., • Provides a positive contribution to pre-construction planning effort., • Communicates well with the support staff (i.e. Design, Purchasing, PM, Admin), • Knows and understands the estimated manhours and scope on projects prior to job start. Works with PM in tracking progress weekly (Field Labor Reports). • Works with Safety Specialist, Construction Administration and HR to assure that employees assigned to upcoming or ongoing work have received the necessary training and certifications. This may include safety training, DOT, OQ, welder testing, and site-specific requirements. • Completes all necessary paperwork i.e. – daily time sheets, safety and quality audits, customer required paperwork, equipment inspections etc., • Advises Project Management of potential problems, work interferences, and schedule difficulties; assists in resolving such problems, as required. • Provides complete, final, project paperwork to Design Group at end of projects for creating of the Final QC Book. Requirements • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • Paid Time Off (accruing immediately), • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR 8LZ3NNYNQp

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo