Structural welding jobs in Hoboken, New JerseyCreate job alerts

Role Overview: The Welder is responsible for performing basic welding and steel fabrication tasks in support of the production of structural steel components for construction projects. This position involves reading shop drawings, measuring, cutting, fitting, and welding steel parts according to specified tolerances and quality standards. Primary Responsibilities Interpret and use prints and sketches to perform layout and welding techniques for structural steel fabrication. Perform general material handling functions, such as; jobsite clean-up and moving of materials by hand. Operate motorized equipment including welding, air arcing, bolting, grinding, use of cutting torch, hammers, reamers, tape measures and overhead crane operation. Perform all job duties following company safety rules and proper use of assigned personal protective equipment. Minimum Qualifications Certified Welder specializing in field operations, with proven ability to complete structural and equipment welding at remote job sites. Knowledge and ability to interpret and use prints and sketches to perform layout and welding techniques for structural steel fabrication. Pass AWS Welding Test on a one-inch grove test in the horizontal position. Ability to frequently lift, carry, push and pull up to 50 pounds of material. Ability to frequently walk, stoop, kneel, reach and climb. Ability to successfully use hand tools such as those listed under position responsibilities. Work requires alert individuals with good balance and physical strength. Experience with heavy flux core wire feed welding. TWIC card preferred but not required. Ability to obtain one is required. What we can offer you: Inclusive Medical, Dental, Vision, Accident, and Illness insurance Company paid Disability and Life insurance Health Savings Account contribution of up to $1,000 per year 401(k) retirement savings program with a company match Employee Assistance Program including discounts with major vendors & products Mental and physical wellness programs Competitive time off package including vacation, sick, and holiday pay Career advancement opportunities with a stable well-established organization Tuition reimbursement program and access to LinkedIn Learning courses *Applications submitted without a resume will not be considered. **CSG/SJ Hamill does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of CSG/SJ Hamill without a prior written search agreement will be considered unsolicited and the property of CSG/SJ Hamill. SJ Hamill Construction is an Equal Opportunity Employer. Qualified candidates will be considered without regard to race, sex, disability, veteran status, sexual orientation, or gender identity

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge What’s needed to succeed: • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license, • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact _

Job Description The Trades Instructor will educate students using Apex curriculum to become proficient in their trade. The Trades Instructor is responsible for delivering and facilitating a prescribed curriculum through a combination of in-class/virtual theory-based instruction and hands-on demonstration/application of skilled trades. The Trades Instructor will prepare and educate students to assume entry level positions within their respective trade. For the Welding Program, the Trades Instructor will provide instruction in welding theory, blueprint reading, metal fabrication, welding safety, and hands-on welding applications including SMAW (Stick), GMAW (MIG), GTAW (TIG), and FCAW welding processes. The instructor will prepare students for entry-level employment opportunities within the welding and fabrication industry. Compensation: $51,432/yr Responsibilities: \n • Instruct students in theory and hands-on curriculum in a classroom environment within the subject of skilled trades and welding applications.\n, • Teach students proper welding techniques including SMAW (Stick), GMAW (MIG), GTAW (TIG), and FCAW welding processes.\n, • Demonstrate cutting, grinding, fitting, fabrication, and metal preparation procedures.\n, • Instruct students on blueprint reading, weld symbols, measurements, layout procedures, and welding specifications.\n, • Teach students proper use and maintenance of welding machines, torches, grinders, plasma cutters, and fabrication tools.\n, • Explain and demonstrate welding safety standards, OSHA regulations, PPE requirements, and safe shop practices.\n, • Evaluate weld quality and demonstrate proper inspection and testing methods to determine weld soundness and structural integrity.\n, • Determines the best method to deliver needed training and course instruction; prepares materials, locations, and supplies accordingly.\n, • Explains and demonstrates jobs and tasks to be performed.\n, • Explains, demonstrates, and emphasizes all safety aspects of jobs and tasks; reviews any applicable job safety analysis with each student.\n, • Schedules, organizes, and provides supplemental training when necessary.\n, • Conducts refresher training and make-up sessions when necessary.\n, • Ensures tools and equipment are properly cleaned, stored, and maintained for optimum performance and safety.\n, • Guides, assigns, schedules, and supervises the work of students; ensures work is completed in accordance with assigned curriculum.\n, • Ensures each assigned student follows all safety standards.\n, • Provides student evaluations based on performance and goals set by Apex curriculum in a timely and constructive manner.\n, • Compile accurate attendance records and grade entries and ensure they are maintained and submitted timely per state and accrediting standards.\n, • Ensures each assigned student follows all established rules and meets expectations for appropriate conduct within the school.\n, • Participate and successfully complete all professional development sessions as required by accrediting and state standards.\n, • Participate in all individual career development sessions as required.\n, • Maintain trades licenses and certifications as needed per state and accrediting standards.\n, • Functions as an ambassador and liaison for Apex Technical School.\n, • Contributes to organization success by accepting new assignments, helping team members, learning new skills, and striving to improve team results.\n\n Qualifications: Job qualifications are stated in the Essential Functions of the job description. An employee must be able to accomplish the Essential Functions to be competent in the job. Other special requirements are noted below: Education: High School Diploma or equivalent Equipment Skills: \n • Thorough understanding of the correct and safe operation of welding and fabrication tools and equipment.\n, • Use of safety equipment/apparel including welding shields, gloves, respirators, and protective clothing.\n\n Software Skills: \n • Microsoft Office Suite\n, • Google Classroom\n\n Required Experience: Minimum of 3 years' experience in welding, fabrication, or related skilled trades. About Us Apex Technical School is an adult vocational technical school located in Long Island City, New York, that provides top-tier vocational training in high-growth trades. Founded in 1961, Apex serves about 1,400 students annually with seven 900-hour certificate courses in skilled trades including refrigeration, automotive service, auto body, welding technology, electrical and advanced electrical, plumbing and construction. Apex certificate programs are highly regarded and have been shown to have a substantial positive impact on economic mobility-leading to entry level careers. Apex is accredited by the Accrediting Commission of Career Schools and Colleges, and licensed by New York State Department of Education Apex offers job placement assistance, financial aid and work-study jobs to those who qualify. Website: https://apexschool.com/

Job Description Job Title: Fire Watchman / Site Laborer Job Description Ensure the safety of welding structural framework on the exterior of a building in Manhattan by closely monitoring all welding activities. Perform general labor tasks on large scale commercial job sites. Responsibilities • Monitor welding operations to ensure all safety protocols are strictly followed., • Watch over the welding structural framework to prevent and address any potential hazards., • Maintain a constant presence in the designated area to ensure the safety of personnel and property., • Perform construction general labor tasks on job site including moving tools and materials, site clean up, etc. Additional Skills & Qualifications • Possession of F60 & G60 certifications., • Completion of OSHA 30 and SST (Site Safety Training) courses., • Must have experience working on large scale construction sites performing site labor or doing fire watch Why Work Here? Join a two-year project with the potential for future job site opportunities, ensuring continued professional growth and stability. Work Environment Work outdoors on the exterior of a building, requiring alertness and adherence to safety protocols in a dynamic environment. Job Type & Location This is a Contract position based out of New York, NY. Pay and Benefits The pay range for this position is $22.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in New York,NY. Application Deadline This position is anticipated to close on Jun 15, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Commercial HVAC Welder – Lead High-Profile Mechanical Piping and Ductwork Installations Job Overview: Company: Northern Wolves Inc. Salary/Pay Rate: $45 to $55 per hour (Based on experience). Location: New York City Metropolitan Area. Job/Employment Type: Full Time. Project Scope: Commercial HVAC / Mechanical. Mandatory Licenses & Certifications: Certified Welder – 6G Pipe Certification, FDNY F-60 Fire Guard, FDNY G-60 Torch Use, and OSHA Certification. The Opportunity: You will serve as a high-level technical expert, executing critical welding tasks across complex commercial HVAC and mechanical systems. This role empowers you to work independently on high-profile New York City jobsites where your craftsmanship directly impacts project structural integrity. You will be a key player in a culture that values professional accountability and elite mechanical expertise. How You Will Make an Impact: Execute precision welding on black iron and stainless steel piping systems to ensure leak-proof mechanical performance. Construct and secure commercial-grade ductwork installations using advanced welding techniques tailored for HVAC environments. Interpret complex mechanical drawings and blueprints to translate engineered designs into accurate field installations. Navigate active commercial jobsites independently, maintaining strict adherence to FDNY safety protocols and OSHA standards. Analyze field conditions to resolve technical installation obstacles and prevent project delays. Maintain a high standard of quality control across all welded joints and structural supports to meet rigorous industry codes. Required Qualifications & Experience: Minimum of 10 years of hands-on field experience specifically within commercial HVAC or mechanical construction. Proven expertise in welding black iron piping, stainless steel piping, and heavy-gauge commercial ductwork. Extensive experience working in active commercial jobsite environments, not limited to shop-only backgrounds. Demonstrated ability to work independently and manage complex field tasks with minimal oversight. Preferred Qualifications & Experience: Advanced knowledge of diverse mechanical piping systems and specialized HVAC installation workflows. Demonstrated history of mentorship or leading small teams during complex mechanical installs. Strong organizational skills for documenting field progress and managing site-specific safety requirements. Compensation & Benefits: Weekly pay cycle. Comprehensive paid time off including holidays, vacation, and sick days. Company vehicle and mileage reimbursement provided. Tech package including a smartphone or tablet for real-time reporting. Access to paid training and professional certifications. Company-provided uniforms and regular team events. About Us: Northern Wolves Air Conditioning is a premier provider of complex commercial mechanical solutions where every team member is a key player. We foster a culture of craftsmanship and accountability, empowering our professionals to lead high-profile projects and build long-term careers. Learn more at www.northernwolvesac.com. Northern Wolves Inc. is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description We are seeking experienced Certified Iron workers/Welders to support multiple active construction projects across New York City. This role involves structural steel work, welding, and site safety compliance in accordance with NYC and NYS regulations, for private, commercial and public construction projects throughout New York City. Key Responsibilities, but not limited to: • Perform structural steel erection, welding, and installation, • Read and interpret construction drawings and specifications, • Safely rig, hoist, and place steel components, • Operate welding equipment and related tools, • Comply with all OSHA, NYC DOB, and site-specific safety requirements, • Maintain a safe and organized work environment, • Collaborate with field teams and supervisors Required Qualifications • Valid NYC Welder License, • Fire Watch Certification (FDNY), • Torch Operator Certification (FDNY), • Minimum 5+ years of masonry experience, • OSHA 30 Certification, • NYC SST Card (minimum 40-hour, as required), • Proven experience in ironwork and welding, • Ability to work at heights and in physically demanding environments, • Reliable transportation, • Ability to work in active construction environments Prevailing wage may apply on certain projects.

Must be within comfortable driving distance to LaGrange, TX. The Site QC Manager is responsible for ensuring strict adherence to quality control standards, customer specifications, and relevant codes during all Company operations conducted on the job site. Reporting directly to the Project Manager, this role plays a crucial part in maintaining the integrity and safety of all project activities. Quality Control • Prepare and meticulously maintain detailed job packages to accurately document all project welding activities., • Monitor daily activities on the job site to verify compliance with customer specifications, quality control guidelines, jurisdictional regulations, and relevant codes., • Conduct regular inspections and audits to identify any deviations and promptly address noncompliant conditions., • Coordinate Authorized Inspection activities and oversee the application of required stamping for pressure retaining items., • Document and promptly resolve any nonconforming conditions, taking necessary corrective actions to maintain project integrity. Technical Acumen • Verify the use of proper welding procedure specifications and ensure proper storage and control of welding electrodes to maintain quality standards., • Perform nondestructive examinations on weldments and coordinate related activities, including heat treating, to verify structural integrity., • Test and certify welding personnel to ensure competency and compliance with industry standards. Collaboration • Coordinate and oversee nondestructive examination activities to ensure accurate and reliable results., • Direct and supervise subordinate Quality Control Inspectors, providing guidance and support to ensure consistent adherence to quality standards. Critical Thinking • Ensure that all documentation aligns with customer requirements, quality control standards, and applicable codes., • Possession of a valid Certified Welding Inspector (CWI) certification from AWS., • Minimum of eight years of experience in ASME Boiler and Pressure Vessel Code construction and/or National Board Inspection Code repair work, with at least four years in a Quality Control function., • Some training minimum, but less than a high school diploma is acceptable., • Experience: 8+ years., • Proficiency in Word, Excel, and Lotus Notes., • Strong problem-solving abilities and attention to detail., • Proficiency in interpreting and applying relevant codes and standards., • Excellent leadership and interpersonal skills for effective team management, • Health Care Plan (Medical, Dental & Vision) Effective on your first day!, • Wellness Programs and Awards Get healthier and earn premium discounts!, • Gym Reimbursement and Weight Loss Benefit, • Retirement Plan (401k, IRA) Company match!, • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long-Term Disability, • Training & Development, • Employee Assistance Program, • Parental Leave, • Flexible Spending Accounts, • Duncan, SC Location Onsite Gym and pickle ball court! Just to name a few!

ENTRUST Solutions Group is looking for a Hydro Mechanical Engineer with strong design and commissioning expertise in hydro turbines and associated balance of plant (BOP) systems for projects in the United States and Canada. The successful candidate will be responsible for turbine mechanical design, technical review and site commissioning support. Responsibilities: • Perform mechanical design and review of hydro turbines (Francis, Kaplan, Pelton, etc.) and associated components., • Perform and review mechanical calculations including structural integrity, vibration, fatigue, and hydraulic load assessments., • Conduct or supervise finite element analysis (FEA) and computational fluid dynamics (CFD) simulations using tools such as ANSYS or equivalent software., • Support condition assessment, refurbishment, uprating, and modernization projects., • Prepare and review technical specifications, calculation notes, design reports, and drawings., • Support selection and sizing of turbine equipment and auxiliary mechanical systems., • Provide technical evaluation of vendor proposals and participate in technical bid assessments., • Review and approve manufacturer documentation and fabrication drawings., • Lead and/or support turbine commissioning activities, including installation supervision, testing, troubleshooting, and performance verification., • Troubleshoot mechanical and operational issues during commissioning and operation phases., • Coordinate with electrical, civil, and control engineers for integrated hydropower plant design., • Ensure compliance with applicable IEC, ASME standards and relevant international codes., • Prepare detailed technical reports and inspection documentation., • Provide construction support services including submittal review, site inspections, and quality assurance., • Attend client meetings (both virtually and in-person)., • Travel as required but not expected to exceed 25%., • Performs all other duties as assigned. What We Offer: • A supportive and inclusive work environment that values diversity and encourages innovation., • Opportunities for professional growth and career development., • Competitive salary and comprehensive benefits package, including generous paid time off, 401(k) with company match, tuition reimbursement, and flexible work schedules., • This position pays between $120,000 and $165,000 annually and is an exempt position. Benefits offered include company-sponsored medical, dental, vision, and 401(k) plan with company match. Also offered are tuition reimbursement, voluntary life, disability, critical illness, accident and hospitalization plans. HSA or FSA medical accounts and FSA dependent care and transportation/parking accounts are also available. These benefits are subject to employee contribution amounts generally set annually. Full-time employees are eligible to earn PTO hours. May be eligible for discretionary bonus as determined by the company. Required Qualifications: • Bachelor’s or Master’s degree in Mechanical Engineering from ABET accredited university (with emphasis in stress analysis, mechanical design or turbomachinery)., • Minimum 7–12 years of experience in hydropower., • Strong experience in hydro turbine design and engineering., • Proven experience in turbine commissioning and performance testing., • Hands-on experience FEA and/or CFD software applied to hydro machinery., • Good understanding of rotor dynamics and mechanical behavior of rotating equipment., • Strong analytical, problem-solving, and technical reporting skills., • Willingness to travel for site inspections and commissioning activities., • Must have a valid driver's license without restrictions. Preferred Qualifications: • Professional Engineer (PE) license., • Knowledge of BOP systems, including: lubrication systems, hydraulic power units, compressed air systems., • Experience in fatigue analysis, welding and cavitation., • Experience in design or analysis of penstock, spherical valves and butterfly valves would be considered a plus., • Experience in AutoCAD, Microstation or other 2D and 3D modelling software (drafting will likely not be part of your role, but experience with the software our drafters and designers use is still very valuable). This role is designated as remote, giving you the flexibility to primarily work from home while staying actively connected to your team and projects. We value collaboration and responsiveness, so we ask our remote team members to be available when in-office presence is needed—such as for client meetings, team events, or training sessions. Our approach blends freedom with shared accountability, making ENTRUST an exciting and supportive environment for professionals who thrive in remote work settings with clear, respectful expectations. Why Join Us? At ENTRUST Solutions Group, we are a community of over 3,000 dedicated professionals committed to our clients and each other. As an ENR Top 100 company, we provide comprehensive engineering, consulting, and automation services to various industries, including gas and electric utilities, telecommunication service providers, pipeline operators, and industrial companies. We are a forward-thinking organization dedicated to leveraging cutting-edge technology to drive success. We are committed to fostering a culture of innovation and continuous improvement. We believe in fostering a culture of inclusivity and respect, where everyone feels valued and empowered to contribute their unique perspectives. If you are passionate about [field/industry] and looking for a place to grow your career, we would love to hear from you! Explore More Opportunities: Not quite the right fit? Check out all our openings at _. To learn more about ENTRUST Benefits and Culture, please visit our company LinkedIn page and follow us at: _ ENTRUST Solutions Group is proud to be an Equal Employment Opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law. Headhunters and recruitment agencies may not submit resumes/CVs through this website or directly to managers. ENTRUST does not accept unsolicited headhunter or agency resumes and will not pay fees to any third-party agency or company that does not have a signed agreement with ENTRUST Solutions Group. #LI-Remote #LI-TW1

Position Overview Certified Welding Inspector. We're seeking AWS Certified Welding Inspectors (CWIs) to support our growing pipeline of infrastructure and structural projects. Certified Welding Inspector (CWI).

Job Description At 20/20, we are leaders in Special inspections & Testing across the Tri-State area, offering top-notch city, national, and international code testing and inspections. Our expertise goes beyond standard safety checks; we specialize in unique and intricate projects with a commitment to excellence. Our cutting-edge on-site laboratory and dedicated technical team ensure that every project benefits from unparalleled accuracy and precision. ABOUT THE JOB: PAY RANGE: $48.00 – $65.00 per hour Key Responsibilities: • Conduct steel and welding inspections to a variety of code standards., • Prepare daily field reports and communicate observed deficiencies. ABOUT YOU: • Certification: AWS CWI, Certified Welding Inspector Certification, • NACE experience is a plus., • Experience with UT, MT, PT Non-Destructive Testing, certification is a plus., • ICC Structural Steel & Bolting Certification is a plus. Why Join Us: • Be part of a forward-thinking company with a reputation for excellence, • Engage in meaningful work with opportunities for professional growth, • Collaborate on high-profile projects 20/20 Inspections & Engineering provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Paid time off, • Professional development assistance, • Referral program, • Tuition reimbursement, • Vision insurance

Job Description At 20/20, we are leaders in Special inspections & Testing across the Tri-State area, offering top-notch city, national, and international code testing and inspections. Our expertise goes beyond standard safety checks; we specialize in unique and intricate projects with a commitment to excellence. Our cutting-edge on-site laboratory and dedicated technical team ensure that every project benefits from unparalleled accuracy and precision. We are seeking a skilled Special Inspectors to join our dynamic team. In this role, you will be ensuring the structural integrity and safety of steel and concrete construction through your inspections. PAY RANGE: $26.00 – $55.00 per hour Key Responsibilities: • Perform special inspections onsite (Masonry, Concrete, Rebar, Mechanical, Bolting and/or Welding)., • Collaborate with contractors, project managers, and clients to ensure inspections are performed accurately and efficiently., • Prepare and review inspection reports in a timely manner., • Report Non-Conformance items. Qualifications: • Any special inspector certifications from the following: ICC, CWI, NICET, ACI, • OSHA 10., • Bachelor's degree in Civil or Structural Engineering preferred, • Experience: Entry Level or Experienced Benefits: • PTO and Holidays., • Medical, Dental, and Vision insurance., • Travel reimbursement for select projects., • Robust career advancement program., • Bonuses based on performance.

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • Ability to read, write and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions. Even Better (but not required): • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Holidays: 11 Federal Holidays (88 Hours) observed in accordance with mcfa's Holiday Schedule "mcfa way" Bonus Program: • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Growth Unit allotment may increase over time. Healthcare & Insurance: • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Inspector – NJ DCA Reports to: Department Manager and/or Project Manager General Qualities: • Qualified NJ DCA Certified Special Inspector to support inspection services on construction projects throughout New Jersey., • This role is responsible for ensuring that all work complies with applicable codes, standards, and project specifications, while maintaining the highest levels of safety and quality., • 3–9 years of relevant inspection experience Technical Duties & Responsibilities: • Perform field inspections in accordance with NJ DCA regulations, project specifications, and applicable building codes, • Inspect construction activities including structural steel, welding, concrete, masonry, and fireproofing, • Verify compliance with approved plans, submittals, and contract documents, • Identify and report non-conforming work and coordinate corrective actions, • Prepare and submit detailed daily inspection reports and documentation, • Coordinate with contractors, engineers, and project stakeholders to ensure quality and compliance, • Maintain accurate and organized records of all inspections performed Requirements: Education\ Certifications: • Bachelor’s degree in civil, Structural, or Geotechnical Engineering (preferred), • Structural Welding, • Structural Steel & Bolting, • Reinforced Concrete, • Structural Masonry, • Spray-Applied Fireproofing, • NJ DCA Special Inspector – Concrete Placement, • NJ DCA Special Inspector – Prestressed Concrete, • NJ DCA Special Inspector – Soils, • Nuclear Gauge Safety Certification (U.S. Department of Transportation), • OSHA 30 Certification Physical Requirement: • Ability to pass a physical exam for full mobility, • Capable of lifting and/or moving up to 50lbs carrying, and transporting equipment, samples, and materials, • Comfortable navigating active construction sites, including ladders, scaffolding, and uneven terrain, • Willingness to work in varying site conditions and project environments KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid drivers license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect Flexible work from home options available.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for structural and thermomechanical design, manufacturability, development, and commissioning of these systems. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Have ownership of the design and development of primary and secondary mechanical fusion components and subsystems, • Work with core system-level development teams to define prototyping requirements, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principles with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholders, • Mentor junior engineersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Minimum of 5 years of experience, • Extensive experience as a lead designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Management of complex assemblies with multiple contributors, • Experience specifying machining, welding, and/or fabrication requirements, • Ability to mentor junior engineers in methods to decompose complex problems, and review that work, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Experience owning systems or complex sub-systems, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s ownCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTOIt’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Contribute to the design and development of primary and secondary mechanical fusion components and subsystems, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principals with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Experience designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience specifying machining, welding, and/or fabrication requirements, • Ability to decompose and solve complex problems, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTOIt’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Special Inspector – AWS CWI / ICC Welding - NY Reports to: Project Manager Technical Responsibilities: • Inspect weldments to ensure compliance with applicable codes, standards, and specifications, • Review welding procedure specifications (WPS), welder qualification records, and inspection reports prior to the start of welding activities, • Verify compliance with contract documents, submittals, and construction drawings, • Oversee non-destructive testing (NDT) and ensure proper materials and procedures are in place, • Identify and report non-conformance issues (NCRs) to contractors and clients in a timely manner, • Prepare and submit detailed daily inspection reports, • Maintain accurate documentation of all inspection activities and findings, • Coordinate with project teams, contractors, and clients to ensure quality and compliance Applicable Building Codes: • BC 1704.3.1, • BC 1704.17, • BC 1704.18, • BC 1704.26 Requirements: Professional Experience & Education\Certifications: • AWS Certified Welding Inspector (CWI) OR ICC Structural Steel & Welding Special Inspector Certification, • Entry-Level (3-5 years) or Mid-Level (6-9 years) with welding inspection experience, • Bachelor’s degree in engineering, Architecture, or related field (preferred), • Strong knowledge of welding codes, standards, and inspection procedures, • Excellent attention to detail and documentation skills Physical & Additional Requirement: • This position requires physical ability to perform field inspections, • Ability to work in diverse weather conditions, • Extended periods of standing and walking, possibly on uneven or challenging terrains, • Climbing, bending, kneeling, • Working long hours & Lift and carry up to 25 lbs., • Valid, clean driver’s license & must have a personal vehicle and be willing to travel daily to project sites across the NYC metro area, • Ability to transport inspection and testing equipment as needed KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job DescriptionSalary: $63,000 - 91,500 Annual Base Salary DOE About mcfa: We are a professional services firm in the Architecture/Engineering/Construction (AEC) industry serving public and private sector clients in the Mid-Atlantic region. Our services include Strategy, Planning, Program Management & Construction Management. Our goal is to help every employee design a fulfilling career through alignment of their individual passions/skills with the vision of the organization. Our mission is "Inspiring People and Places through Project Leadership and Project Development." How you'll get to contribute: We are seeking a dedicated and skilled Construction Inspector for soil testing inspections and future road and bridge inspection projects. Our ideal candidate will be a highly motivated & qualified individual, with experience in quality assurance and quality control testing of materials related to soils and aggregates in the field. Candidate should have a solid understanding of civil engineering principles with a geotechnical focus, and a desire to work on multi-disciplinary projects. In this role, you will be responsible for overseeing and inspecting various highway and/or bridge construction projects across New Jersey, ensuring that all work is completed in accordance with established standards, specifications, and regulations. This role will also involve office engineer duties as outlined below. Work schedule varies according to job assignments and/or contractors' schedule, to include night work, weekends, and holidays. This job requires travel to various job sites. What you'll do: • Material quality services are completed through field operations in all the major material disciplines as directed (soils, aggregate, metals, structures, asphalt, concrete coatings, and paints)., • Observe field work to ensure workmanship and materials meet standards., • Inspect soil boring operations -- roadway borings, retaining wall borings, bridge borings., • Soil identification., • Prepare field boring logs in accordance with NJ Turnpike procedures., • Install wells and record monitoring well data., • Enter data for Test calculations., • Maintain project records., • Ability to document daily inspections and various other reports., • Provide daily inspections of highway and/or bridge construction projects and inspect related work materials to ensure compliance with design specifications, safety standards, and state regulations., • Prepare detailed reports on inspection findings, including recommendations for corrective actions when necessary., • Monitor and document the progress of construction activities, identifying any deviations from the planned schedule or specifications., • Communicate with prime and other subcontractors., • Coordinate with project team members, engineers, and contractors to address and resolve any issues that arise during construction., • Ensure that the contracted drilling firm carries out its work in accordance with contract specification., • Review and interpret construction plans, blueprints, and specifications to ensure accurate implementation on-site., • Assist in the development and implementation of quality control procedures., • Attend meetings and conferences as needed., • Travel to various project sites. Who you are: • Bachelor's degree in Civil Engineering, Construction Engineering, Geological Engineering, Structural Engineering, or related field., • Familiar with ASTM and AASHTO standards for testing and inspections., • Strong knowledge of construction methods, materials, and legal regulations., • Excellent communication and interpersonal skills., • Ability to read and interpret engineering drawings and specifications., • Proficient in Microsoft Office and project/construction management software., • Valid driver's license, consistent means of transportation to/from project sites, and willingness to travel to various project sites within New Jersey., • Ability to read, write and understand English for purposes of comprehending written job-related communications and verbal instructions and interactions. Even Better (but not required): • 2+ years of experience in construction inspection, with a focus on transportation infrastructure projects and/or soil testing., • Familiarity with Bentley gINT software., • Certifications/Trainings, • OSHA 30, • American Concrete Institute (ACI) - Soil Inspector, Concrete, • International Code Council (ICC) - Soil Inspector, Masonry steel, Bolting, Welding, Post installed anchors, • TR1 Special Inspections, • New Jersey DCA Certified, • NICET I certification in Highway Construction Inspection or Construction Materials Testing Soils., • Professional Engineer (P.E.) license., • NJSAT and TCC/TCP Certifications. What's in it for you: Annual Paid Time Off: • Sick Leave: 5 Days (40 Hours), • Vacation: 15 Days (120 Hours), • Holidays: 11 Federal Holidays (88 Hours) observed in accordance with mcfa's Holiday Schedule "mcfa way" Bonus Program: • Following your first full quarter worked, you will qualify for a profit-share bonus that is distributed at the end of each quarter if company targets are hit., • Incoming Growth Units: 10, • Growth Unit allotment may increase over time. Healthcare & Insurance: • Eligible to participate in mcfa's family medical, dental and vision coverage; plan access begins on the first day of employment., • mcfa contributes up to 75% shared cost, not to exceed $700 per month., • Company paid life insurance plan (up to $100,000 per employee)., • Company paid short-term and long-term disability insurance. Retirement • You are eligible to participate in Company retirement plan (401k) on first day of employment with mcfa. mcfa Core Values (LEADS): • Love (each other, mission, work), • Entrepreneurial (spirit of innovation), • Accountability (to ourselves, our clients, each other), • Delight (customers and teammates), • Stretch (individual and collective growth mindset) mcfa is an Equal Employment Opportunity Employer. mcfa does not discriminate against any applicant or employee with regard to hiring, tenure of employment, promotion, transfer, selection for training, or any other terms or conditions of employment because of race, color, religion, sex, age, sexual orientation, disability, gender identity or national origin, status as a Vietnam-era or special disabled veteran in accordance with applicable federal law, or on any ground protected by state or local law in each area in which mcfa maintains facilities. #ZR Company DescriptionCompany Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. Our core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.Company Overview: We are an entrepreneurial firm focused on strategic planning, project development, program management, and construction management. We are a dedicated team of professionals, committed to delivering innovative solutions to our clients by inspiring people and places. We believe that our approach to grow, empower, and deploy Project Leadership is our differentiator in the client and talent marketplace. We have been steadily growing and establishing ourselves as an entrepreneurial leader in the industry. As we continue to expand, we are seeking a highly capable and experienced Director of Construction Management to join our senior leadership team and play a crucial role in directing our construction project and program success. \r\n\r\nOur core values drive how we hire, fire, train, incentivize and reward. They steer our company’s growth and serve as the common ground we seek in professional relationships with our clients and team members. mcfa core values: Extreme Ownership, Intentional Creativity, Fun, Teamwork, White-Glove Customer Experience, Growth-focused, Entrepreneurial Spirit.

Job Description Truck Driver and Door Installer Apprentice – Support Commercial Loading Dock Infrastructure and Material Logistics Job Overview • Company: United Steel Products Inc., • Salary/Pay Rate: $25.00 to $35.00 per hour (Prevailing Wage Projects Eligible)., • Location: Flushing, NY., • Job/Employment Type: Full-Time., • Schedule: Monday through Friday (Overtime and weekend work required based on project needs)., • Project Scope: Commercial Doors & Loading Docks., • Mandatory Licences & Certifications: Valid NY Driver’s License (Held for minimum 3 years), OSHA 30 Certification, and NYC SST Card. The Opportunity You will step into a foundational field operations role, blending commercial material transport logistics with structured technical field installation training. This position provides the unique pathway to learn a high-demand mechanical trade under the direct mentorship of senior industry technicians. You will directly impact jobsite readiness and project delivery across the NY Metro Area while securing elite prevailing wage earnings. How You Will Make An Impact • Operate a 20-foot commercial flatbed truck safely to transport heavy industrial doors and structural materials., • Assist experienced mechanical technicians with the technical assembly and repair of overhead rolling steel systems., • Manage heavy field material handling processes by safely loading and unloading mechanical assemblies., • Participate actively in hands-on field training encompassing structural mechanical, basic electrical, and welding tasks., • Execute critical site preparation layouts and meticulous post-installation cleanup protocols daily., • Maintain complete compliance with regional construction safety mandates and corporate risk-reduction guidelines., • Represent the organization with absolute professionalism while operating on high-security commercial and federal sites. Required Qualifications & Experience • Minimum of 3 years of valid NY driving experience backed by a verified clean personal driving record., • Proven experience maneuvering, loading, and driving a 20-foot commercial flatbed truck or equivalent vehicle., • Active, non-expired OSHA 30 Certification alongside a valid New York City Site Safety Training (SST) card., • Physical capacity to execute demanding technical labor and lift mechanical components weighing up to 75 lbs., • Strong listening skills necessary to execute immediate technical commands and adapt to changing jobsite conditions. Preferred Qualifications & Experience • High School Diploma, General Education Development (GED) equivalent, or higher level of academic achievement., • Prior hands-on labor experience within general civil construction, commercial carpentry, or mechanical trades., • Fundamental operational knowledge of electrical circuitry, motorized control panels, or structural rigging systems. Compensation & Benefits • Competitive hourly entry pay ranging from $25.00 to $35.00 augmented by a stable weekly pay cycle., • Immediate access to premium public works prevailing wage opportunities that significantly boost your earning power., • Complete health infrastructure including comprehensive medical, dental, and vision insurance coverage options., • Financial security frameworks encompassing a robust 401(k) retirement savings program and group life options., • Substantial paid time off package covering dedicated personal days, earned vacation, and sick leave., • Fully funded professional safety certifications, technical manufacturer training, and field trade advancements., • Clear, non-capped structural career progression tracks to advance from apprentice to senior technician status. About Us United Steel Products Inc is a premier commercial door and loading dock manufacturer serving industrial, commercial, and government sectors for over 50 years. We cultivate a highly stable, family-oriented workplace culture built upon team synergy, mutual accountability, and individual vocational development. Our organization takes pride in our multi-decade employee retention, offering clear career paths and robust operational backing. United Steel Products Inc is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, gender expression, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by law or regulations. It is our intention that all qualified applicants be given equal opportunity and that selection decisions be based on job-related factors.

Job Description Quixote is a leading provider of production services for the entertainment industry. Quixote rents production trailers, trucks, lighting and grip and other equipment to support a wide range of productions including long-form television and feature film, as well as high-end photo shoots and commercials. We operate in Los Angeles and New York, while also servicing on-location productions across the U.S. Quixote offers unparalleled convenience, service and quality to productions of any size. At Quixote, everyone on set is a VIP. Job Summary: This role is responsible for performing mechanical repairs and service operations on light- and heavy-duty equipment and vehicles, including inspection, repair, fabrication, rebuilding, and ongoing maintenance. The position requires the ability to perform both light and heavy manual labor, work flexible hours as business needs dictate, and operate under the general supervision of the Fleet Manager. What You'll Do: Service and maintain custom trailers and RV’s. Diagnose issues and determine best course of action to remedy the problem(s). Provide and document complete diagnostic tests and repair/replacement services to fleet management team. Track all parts and materials used in repairs/replacements. Perform routine and preventative maintenance. Communicate regularly with fleet management team on issues and update on project completion regularly. Perform pre-delivery inspection. Assemble RV structure, wall, and roof, fresh water/waste plumbing. Perform basic welding tasks. Troubleshoot, repair, and maintain RV appliances, LPG system, A/C system. Install electrical wiring and balance electrical load and entertainment and satellite systems (Winegard, Motosat, Kingdone). Repair and maintain cabinetry. Install, repair, and maintain braking and towing systems. Plan workload according to oral and written directions and complete assignments on or before the scheduled completion date. Maintain interior and exterior cleanliness of the lot and building at all times; perform these duties when vehicles are not available. Process all paperwork regarding equipment damage and report to management. Dispose of hazardous waste materials properly. Follow and adhere to safety rules, regulations, and the proper use of equipment relevant to each job skill and qualification. Perform all other duties as assigned. What You'll Need: Have 4+ years of RV repair and maintenance experience and/or other relevant experience, including electrical, plumbing, and mechanical work. Have experience in PDIs, wall, roof, and structural repairs and replacements, welding, fresh water and waste plumbing, RV appliance troubleshooting, LPG system maintenance, RV A/C system maintenance, troubleshooting, and repair, RV electrical wiring and balancing electrical loads, carpentry, RV entertainment and satellite systems, RV brake system maintenance and repair, and RV towing system maintenance and repair. Hold RVIA certification, preferably. Be flexible to support rental operations during non-business hours, including holidays, weekends, and evenings, as needed. Possess basic computer skills, including proficiency in MS Office Suite (Word, Excel, Outlook). Be able to multitask and manage several projects simultaneously. Be detail-oriented and able to meet or exceed deadlines. Have knowledge of the methods, materials, and equipment used in the maintenance and repair of various types of equipment and power-driven tools. Possess a valid driver’s license and a safe driving record. Have working knowledge of the occupational hazards and safety precautions of the trade. Be reliable and possess a strong work ethic, a willingness to learn, and a desire for continual professional growth. Physical Requirements: Physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of the position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position. Heavy Work requires the ability to continually life, push, or pull at least 50+ pounds of product. Physical activity requires, but is not limited to: climbing, crouching, grasping, hearing, kneeling, lifting, pulling, pushing, reaching, repetitive motions, standing, stooping, talking, walking. Work Environment: Activities include regularly working in outside weather conditions, exposure to extremes of temperature, visibility, wet and/or humid conditions and vibrations. Noise level in work environment is usually loud. Dust, mechanical hazards, moving objects, operating vehicle, and shift work. Quixote Studios is proud to be an Equal Opportunity employer. We consider all qualified applicants for employment without regard to race, color, religion, creed, sex, gender identity or expression, national origin, age, disability, medical condition, marital status, sexual orientation, genetic information, protected veteran status, or any other basis protected by applicable law, including federal, state, and local fair chance laws. Employment is contingent upon completion of applicable screenings in accordance with local laws. The company uses E-Verify to confirm the identity and employment eligibility of all new hires. If you require a reasonable accommodation during the application or hiring process, please notify us at talent@quixote.com so we can support you throughout the recruitment experience.