Structural welding jobs in New York, New YorkCreate job alerts

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. • Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment, • Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision, • Journeyman electrical license a plus, • Requires the ability to make low and high voltage repairs to all building electrical equipment, • This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices, • You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors, • Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions, • Schedules are bid and awarded according to seniority, • Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT), • Salary increases will be administered according to the current IBT/United contract, • New employees are required to join the union within ninety (90) days of employment, • Twenty Four months experience required in at least three of the following areas:, • Electrical (including 480 volt, 3 phase), • Structural (including steel frame construction), • HVAC (including building management systems), • Mechanical (including conveyors), • Plumbing, • PLC electronic/computer controls, • Must have completed high school diploma, GED or equivalent, • Ability to maintain and repair all building disciplines, heavy mechanical and welding, • Work may be indoors or outside or in elevated areas anywhere on airport, • Must be able to climb and work from ladders, and/or walk for extended periods, • Moderate lifting, • Must possess sufficient tooling to perform required tasks, • Computer experience for input and retrieval of data, • Qualified candidates must be immediately available for full time employment, • Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: • Electronics diagnostics and troubleshooting The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an Equal Opportunity Employer. We recruit, employ, train, compensate, and promote without regard to race, color, religion, national origin, gender identity, sexual orientation, disability, age, veteran status, or any other protected category under applicable law. We provide reasonable accommodations for applicants and employees with disabilities. To request an accommodation, contact ___

Job DescriptionSalary: $25-28 John Mini is seeking a highly knowledgeable and skilledWelder for the fabrication and installation of indoor and outdoor projects. As part of the Fabrication team at John Mini, you will be responsible for producing high-quality metalwork for custom projects, supporting both shop fabrication and on-site installation. This role is ideal for someone with strong welding experience, solid fabrication knowledge, and a collaborative mindset. Responsibilities • Fabricate decorative ornamental and architectural metalwork, • Perform semi-structural and architectural welding, • Assist with custom metal fabrication for indoor and outdoor projects, • Support installation of finished metalwork on site, • Apply metal finishing techniques as needed, • Operate and maintain metal fabrication machinery and equipment, • Service and maintain shop machinery, • Read and interpret architectural, millwork, and engineering drawings, • Problem-solve complex fabrication and installation conditions, • Work closely with a team of fabricators to meet project timelines, • Bring your skills to support other departments when needed Who Were Looking For • Someone seeking purpose in their work, as well as future growth and development, • Someone full of optimism and positivity, • Someone comfortable making mistakes and committed to constant learning, • Someone seeking a place to build a long-term career Qualifications / Requirements • Minimum 3 years of fabrication experience in metal fabrication, • Welding experience required; Arc, MIG, and TIG experience strongly preferred, • Experience with architectural or semi-structural welding, • Ability to read and comprehend architectural, millwork, and engineering drawings, • Knowledge of metal fabrication machinery and equipment maintenance, • High school diploma or GED, • Strong communication and organizational skills, • Valid drivers license and reliable transportation, • Ability to lift 75 lbs. At John Mini Distinctive Landscapes, we make places beautiful. We make spaces more sustainable, productive, and enjoyable through the exciting work that we do. We are proud to offer exciting benefits on the first day of employment! This includes medical, dental, vision, pet insurance, telehealth & a variety of supplemental plans. John mini offers a 401(k) program with company match, profit sharing, paid holidays, a Paid Time Off (PTO) program and so much more! Come join our team where we like to push the limits, dream big and bring nature to the spaces where people live, work and play! Sound like a fit? Check us out at

Job DescriptionJob Summary We are searching for an experienced and reliable foreman ironworker to run structural steel erection projects in New Jersey, Pennsylvania and Delaware. Responsibilities • Knowledgeable in layout, rigging, connecting, bolting and welding steel by following prints and instructions while guaranteeing all quality and safety standards are met., • Read and follow blueprints, sketches and other instructions., • Efficiently coordinate and manage all aspects of steel erection projects from start to finish, • Track project progress and report to office regularly, • Prep tools and equipment prior to jobs starting Qualifications • High school diploma or its equivalent, • Must be able to lift 70lbs and withstand the physical demands of erecting steel

Job Description Job Title: Structural Steel Ironworker — MTA Project Position Summary: The Employer is seeking experienced and safety‐conscious Structural Steel Ironworkers to perform erection, installation, and repair of structural steel components for Metropolitan Transportation Authority (MTA) projects. The successful candidates will work from engineering drawings and specifications to ensure accurate, timely, and code‐compliant completion of assigned work. Key Responsibilities: • Erect, position, align, secure, and connect structural steel members in accordance with project drawings and specifications., • Install anchor bolts, base plates, stiffeners, splices, and connection hardware; perform bolting, welding, and grinding as required., • Rig and signal for cranes and hoisting equipment; assist riggers and follow qualified rigger directions., • Interpret blueprints, shop drawings, layout marks, and perform field layout using levels, plumb bobs, lasers, and measuring instruments., • Perform on‐site adjustments, shimming, and fit‐up to achieve specified tolerances., • Maintain tools, equipment, and assigned materials; ensure proper care and secure storage., • Adhere to all safety regulations, including fall protection, confined space entry, lockout/tagout, and hot‐work procedures; promptly report hazards or incidents. Minimum Qualifications: • Minimum [5] years of proven experience in structural steel erection on heavy civil or transportation projects., • Demonstrated ability to read and interpret structural drawings and perform field layout., • Competence in bolting, welding (as applicable), rigging, and use of common ironworker tools., • Valid OSHA 10‐hour or 30‐hour Construction Safety Card (specify required).

Job Description G&L Welding Services LLC is seeking an experienced structural steel ironworker to assist with erection, layout, and installation of structural steel on a per diem basis. The ideal candidate has hands-on experience installing steel beams, columns, and structural framing, can interpret structural drawings, and is capable of taking accurate field measurements for fabrication and installation. Projects include residential and commercial structural steel work throughout Long Island and the NYC area. Responsibilities * Assist with erection and installation of structural steel including beams, columns, lintels, and structural framing * Interpret structural drawings and shop drawings * Take accurate field measurements and layouts for fabrication and installation * Perform bolting, rigging, and field welding * Assist with alignment, leveling, and installation of steel members * Coordinate with equipment operators and crew during steel erection * Maintain safe work practices on job sites Requirements * Proven experience with structural steel erection * Ability to read and interpret structural plans * Experience with field layout and measuring * Knowledge of rigging, bolting, and steel connections * Comfortable working with lifts, telehandlers, or similar equipment * Reliable transportation * Strong work ethic and ability to work independently Preferred Qualifications * Welding experience (SMAW / stick welding) * OSHA 10 or OSHA 30 certification * Experience with residential structural steel installations Schedule * Per diem / project-based work depending on workload * Mostly daytime hours About G&L Welding Services LLC G&L Welding Services LLC is a growing metal fabrication and installation company specializing in structural steel and architectural metals for residential and commercial construction projects across Long Island.

Job Description MAC Products is a third-generation, family-owned manufacturer based in Kearny, NJ with 60 years in business. We serve the rail transit electrification and electrical utility industries — a specialized niche where attention to detail and craftsmanship genuinely matter. As we continue to grow, we are looking for a hands-on, experienced Quality Inspector to join our small quality team and take ownership of mechanical inspection activities. This is a full-time, on-site position (Monday–Friday, Kearny NJ). Please apply only if you are currently local and able to commute daily. What You'll Do • Perform dimensional and mechanical inspections of machined, fabricated, and assembled components using standard shop measurement tools., • Conduct visual weld inspections to workmanship standards — evaluating MIG and TIG welds on fabricated structures and assemblies., • Inspect brazed joints and assembled hardware per engineering drawings and applicable standards., • Identify and document nonconforming material; support disposition decisions with production and engineering., • Record inspection results accurately in electronic systems and paper traveler documents., • Collaborate closely with manufacturing to catch defects early and provide clear, actionable feedback to operators., • Perform some electro-mechanical inspection activities as needed (cross-training with electrical inspector). What We're Looking For Required: • Minimum 3–5 years of hands-on experience in a manufacturing inspection or quality control role., • Proven ability to read and interpret mechanical engineering drawings — GD&T, tolerances, weld symbols., • Experience with standard measurement tools: calipers, micrometers, gauges, weld fillet gauges., • Familiarity with MIG and TIG welding processes and the ability to perform visual weld inspections., • Strong hands-on mechanical aptitude and attention to detail., • Comfortable working on the shop floor in a manufacturing environment., • Must be a U.S. citizen or permanent resident. Preferred / Big Plus: • AWS Certified Weld Inspector (CWI) certification — not required, but highly valued., • Background in structural fabrication, heavy manufacturing, or job shop environments., • Exposure to ISO 9001 or another formal Quality Management System., • Experience with non-conformance documentation and basic root cause analysis. Why MAC Products? • Small quality team — your work is visible and your contributions matter directly., • Niche industry: rail transit and electrical utility hardware — interesting, specialized work., • Stable, established company (60 years) with a growth-oriented leadership team. Our fully integrated 4.5 acre complex is located in the industrial section of South Kearny, New Jersey. Our engineering, design, and manufacturing operations are primarily focused on the electric utility and electrified transit industries, but our versatile capabilities support a wide range of the needs of other industries.From humble beginnings more than 50 years ago, MAC has evolved into a field leader and highly recognized producer of high quality equipment and products for the transmission, distribution and control of electrical power.\r\n\r\nOur fully integrated 4.5 acre complex is located in the industrial section of South Kearny, New Jersey. Our engineering, design, and manufacturing operations are primarily focused on the electric utility and electrified transit industries, but our versatile capabilities support a wide range of the needs of other industries.

Job Description Structural Steel, Miscellaneous Iron, and Stair Contractor is seeking an in-house employee to supervise our steel fabrication shop and yard operations. Primary Responsibilities: • Supervise and coordinate the daily activities of union steel workers, • Read and utilize blueprints/drawings to prepare work plans, • Established and adjust work sequences to meet schedules, • Assist workers in performing tasks such as welding, bolting, chipping and using power tools, • Supervise material handling, rigging and truck loading, • Maintain time and safety records, • Preparing material and equipment for shipment to various jobsite, • Organizing trucking schedules Essential Job Functions: • Coordinate activities with ECIW’s union field forces, • Maintain equipment, tools and consumables, • Analyze and resolve work problems., • Provide leadership in setting safety, production, and conduct examples, • Additional miscellaneous, incidental, or similar duties which may be required from a day-to-day supervisor Work Experience Requirements • Familiarity with steel members, erection equipment and tools, • Ability to read drawings and material lists, • Ability to safely rig material and equipment, • Experience in a steel fabrication shop, • Management experience Competitive pay and benefits offered.

We're seeking AWS Certified Welding Inspectors (CWIs) to support our growing pipeline of infrastructure and structural projects. Work alongside PEs, senior inspectors, and technical experts. Certified Welding Inspector (CWI).

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Employee discounts, • Free uniforms Location: Queens, NY (on-site) Department: Engineering / Operations Reports To: VP Operations Type: Full-time Role Summary Were looking for a hands-on Manufacturing Engineer (3+ years) to drive throughput, quality, and cost reduction across our window manufacturing lines (vinyl/aluminum). Youll own process improvement, tooling/fixtures, new equipment integration, and production supportpartnering closely with Production, Quality, Maintenance, and Sales to keep jobs moving and customers happy. Key Responsibilities • Process Optimization: Map current state, remove bottlenecks, and improve takt/OEE, scrap, and first-pass yield using lean/5S/Kaizen., • Equipment & Tooling: Specify and commission machinery (e.g., double-miter saws, 4-head welders, corner cleaners, hardware stations, IGU line); design jigs/fixtures; create preventive maintenance plans with Maintenance. Assist the mechanic with troubleshooting equipment and minimizing downtime., • Standard Work & Documentation: Build/maintain SOPs, WIs, control plans, PFMEA; train operators and line leads., • Quality Engineering: Analyze defects/returns; implement corrective actions aligned to AAMA/NFRC and relevant ASTM performance standards (air/water/structural/thermal)., • New Product Introduction: Industrialize new profiles/assembliesBOM/routing setup, pilot runs, capability studies, and ramp-to-rate., • Data & Cost: Track line metrics (OEE, downtime, changeover, scrap); partner with Supply Chain on yield, alternative materials, and vendor qualifications., • Safety & Compliance: Engineer guards/ergonomics; support OSHA and electrical/mechanical safety on the floor.Qualifications, • 35+ years in manufacturing/industrial engineering (windows/fenestration, building products, or discrete fabrication strongly preferred)., • BS in Mechanical, Industrial, or Manufacturing Engineering (or equivalent experience)., • Ability to read and write in Chinese, • Proficiency with CAD (SolidWorks/AutoCAD) and MS Office., • Demonstrated lean toolkit (5S, SMED, value-stream mapping, root cause/8D)., • Comfortable on the floordiagnosing issues at machines, with operators, and vendors.Nice to Have, • Experience with IGU processes (spacer/butyl/hot-melt, gas fill), vinyl welding parameters, aluminum fabrication, and hardware installation cells., • Basic statistics/DOE; gauge R familiarity with AAMA/NFRC audits., • Exposure to PLC/HMI basics and machine safety.What Success Looks Like (First 90180 Days), • Launch 5S + Standard Work in one of the three production lines (vinyl production); OEE +10% and scrap 15%., • Improve QC satisfactory results by 30%., • Implement PM checklists on priority machines; unplanned downtime 20%.Compensation & Benefits, • MondayFriday, primarily day shift; occasional off-shift support for trials/startups., • Office adjacent to production; frequent time on the floor with PPE.Equal Opportunity Employer. We value diversity and provide equal employment opportunities to all employees and applicants.

Job DescriptionSalary: $45-$55 per hour Certified Welding Inspector (CWI) Location: NY Metro Area (Job Sites) Employment Type: Full-Time Why Join AEIS? At AEIS, we do more than inspect we build confidence in the world around us. Our work supports infrastructure, innovation, and the future of our communities. We value craftsmanship, teamwork, and continuous improvement, and we invest in the people who share those values. Here, your career is a path not a position. AEIS professionals grow into QA Leads, Technical Specialists, and Project Leaders who shape the future of construction quality. Learn more: Training & Growth That Matters AEIS operates a full in-house NDT & Technical Training Program covering MT, UT, Hardness testing, and more. Whether youre building new skills or enhancing your expertise, youll find hands-on support, mentorship, and real career mobility. Position Overview Certified Welding Inspector Were seeking AWS Certified Welding Inspectors (CWIs) to support our growing pipeline of infrastructure and structural projects. In this role, you'll perform inspections across NY/NJ job sites and contribute to the ongoing development of welding quality assurance processes at AEIS. What Youll Do Quality Assurance & Inspection • Perform visual and destructive weld inspections to ensure compliance with AWS D1.1/D1.5, ASME, and DOT standards., • Monitor welding operations and ensure procedures and personnel are qualified., • Identify and document weld defects and non-conformities., • Maintain accurate inspection records and generate professional reports using our proprietary software, designed to report welding and NDT inspections., • Verify and review WPSs, PQRs, and Welder Certifications., • Work closely with project managers, welding engineers, and NDT staff., • Participate in process optimization reviews and corrective action reports. What We're Looking For Must Haves • AWS CWI Certification (Active), • 110 years of hands-on structural welding inspection experience, • Strong communication skills in English (spoken & written), • Basic math and technical documentation skills, • Ability to interpret engineering drawings and construction plans, • Willingness to travel to project sites throughout NY and NJ Bonus Points • MT and UT certifications (Level I/II), • Experience with bolting inspections, • Familiarity with ASME standards, • Experience working on DOT or public infrastructure projects Why This Role Stands Out • Join a welding ecosystem where you can train others, grow your skills, and participate in failure investigations, • Direct collaboration with AEIS Metallurgy & NDT Labs, • Access to internal certification programs, • Work alongside PEs, senior inspectors, and technical experts, • Competitive pay aligned with certifications & experience, • Clear growth pathway to QA Lead and Technical Specialist, • Supportive, inclusive, and professional team culture Salary Range: $45 - $55 per hour This range is based on national market data and may vary widely by experience and location. Benefits • 401(k) with company contribution, • Health, Dental & Vision Insurance, • Paid Time Off (PTO), • Family Leave, • Professional development & certification support, • Employee referral bonuses, • Parking and transit benefits, • Tuition reimbursement, • Company sponsored discounts (Verizon), • Cross-training & internal mentorship opportunities Equal Opportunity Employer AEIS is an equal opportunity employer and does not discriminate with respect to any term, condition or privilege of employment based on race, color, religion, sex, sexual orientation, gender identity or expression, age, disability, military or veteran status, marital status, or status of an individual in any group or class protected by applicable federal, state, or local law. Employment Authorization Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Have ownership of the design and development of primary and secondary mechanical fusion components and subsystems, • Work with core system-level development teams to define prototyping requirements, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principles with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Track and report results and progress against program goals and milestones, • Communicate and collaborate with internal and external stakeholders, • Mentor junior engineersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Minimum of 5 years of experience, • Extensive experience as a lead designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Management of complex assemblies with multiple contributors, • Experience specifying machining, welding, and/or fabrication requirements, • Ability to mentor junior engineers in methods to decompose complex problems, and review that work, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Experience owning systems or complex sub-systems, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skills, • Innate desire to learn, innovate, and critique ideas including one’s ownCompany Benefits:, • Salary range $110,000-$180,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionSalary: $35-50 DOE Summary: Esposito Construction has dozens of major sitework projects underway in NJ and were looking for a Heavy Equipment Mechanic.Must have a minimum of 3 years experience Benefits: • Medical Insurance paid by Esposito Construction for single rate., • 401(k) eligibility with company contribution., • Dental insurance eligibility., • Vision insurance eligibility., • Paid time off., • Pay: Flexible, experience based $35-50 DOE Requirements: • Ability to perform large and small repairs in either a mobile or shop setting., • Strong preventative and predictive maintenance experience., • Experienced in engine diagnostics, hydraulics, electrical, HVAC, drivetrain, brakes and suspension., • Focuses first and foremost on safety in all aspects of equipment repairs. Responsibilities: • Diagnose, troubleshoot, and repair dozers, loaders, excavators, and occasionally Mack trucks., • Perform routine maintenance, inspections, and preventative care to ensure equipment operates efficiently., • Identify and replace faulty hydraulic, electrical, and mechanical components as needed., • Conduct engine, transmission, and brake system repairs on heavy equipment., • Perform welding and fabrication when necessary for structural repairs., • Use diagnostic tools and equipment to troubleshoot electrical and hydraulic systems., • Keep accurate records of repairs, maintenance schedules, and parts used., • Ensure compliance with safety regulations and proper use of PPE., • Work independently or as part of a team to minimize downtime of equipment., • Occasionally perform field service repairs on job sites when equipment breakdowns occur. Keeps shop/truck equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. * Keeps supplies ready by inventorying stock; placing orders; verifying receipt. Esposito Construction LLC is an Equal Opportunity-Affirmative Action Employer Minority / Female / Disability / Veteran / Gender Identity / Sexual Orientation / Age

Job Description Currently we are looking for Structural Steel Inspectors for immediate Building & Infrastructure Projects Location: Greater New York City Metropolitan Area (Project Location Varies) Status: Part Time as Needed Duration: Extended Client: Varies Compensation: $40hr - $55/hr Based on Certification & Experience Structural Steel Inspector Role Overview The Structural Steel Inspector provides specialized inspection, testing oversight, and verification services for steel fabrication and erection activities on Building & Infrastructure projects throughout the Greater New York City Metropolitan Area. This role supports both Quality Control (QC) and Quality Assurance (QA) programs in accordance with 1 RCNY §101-06, Chapter 17 of the NYC Building Code, the International Building Code (IBC), and applicable industry standards. The Structural Steel Inspector is responsible for verifying that structural steel materials, fabrication, welding, bolting, erection, and associated construction activities conform to approved contract documents, structural drawings, specifications, shop drawings, and code requirements. This includes inspection of Fracture Critical Members (FCMs), moment frames, braced frames, connections, and load-bearing steel systems. This position requires an active on-site presence during fabrication (when required), steel erection, welding, bolting, and testing activities, including witnessing required inspections, non-destructive testing (NDT), and verification of corrective actions. The inspector coordinates closely with fabricators, erectors, contractors, construction managers, special inspectors, testing agencies, and client representatives to ensure inspections are performed at the appropriate stages of work. The Structural Steel Inspector plays a critical role in ensuring structural integrity, load-path continuity, seismic performance, and code compliance, proactively identifying non-conforming conditions, issuing Non-Conformance Reports (NCRs), and verifying repairs and re-inspections in accordance with approved procedures. • Work responsibilities may include but are not limited to the following:, • Inspection of structural steel fabrication and erection activities, • Verification of material certifications, mill test reports, and traceability, • Inspection of welding procedures, welder qualifications, and weld execution, • Inspection of bolted connections (snug-tight, pretensioned, slip-critical), • Verification of steel alignment, plumbness, and tolerances, • Work hours may include early mornings, evenings, weekends, or night shifts depending on project requirements and concrete placement schedules., • Travel to various Fabrication Shops may be required., • Reporting & Documentation Requires you to:, • Prepare and submit daily inspection and test reports within required timeframe., • Utilize client or company reporting platforms as require, • Maintain organized and auditable inspection records Requirements • A minimum of 3 years of experience inspecting construction work in the city of NY, varied in Size and complexity. Projects may include commercial high-rise buildings, residential towers, transportation infrastructure, utilities, institutional facilities, and public-sector construction., • Familiarity with 101-06 and Chapter 17 of the NYC building code and the International Building Code., • Holds OSHA 10 or OSHA 30 Certification taken within the last 5 years., • Well versed in all aspects of construction and QA/QC responsibilities, • Familiarity with applicable Soils & Geotechnical Systems, • Training and/or knowledge in fall protection, scaffolding and ladders, & work-zone safety, • High School Diploma or Equivalent, • Physical Abilities applicable to construction projects in the City of New York and the ability to work outdoors in varying weather conditions and navigate active construction sites, including climbing ladders, scaffolding, and walking uneven surfaces., • Currently holds certification as in one or more of the following:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ICC Certification as a Structural Welding Inspector (ICCSWI), • ICC Certification as a Structural Steel and Bolting Inspector, • ASNT-NDT LVL 2 or 3 (PT, MT, & UT) In this roll you will: • Implement the quality assurance measures on varying construction projects., • Review and submit all required documentation in accordance with project specifications, • Continually monitor work-in-progress, • Issue Non-Conformance Reports (NCR) where necessary., • Conduct inspections/tests as appropriate and as required, • Coordinate all work with the General Contractor or CM, • Notify the contractor if there are deviations to the Contract documents (including Contract Design Documents), • Document all RFIs; field coordination, issues and their resolution; deficiencies; corrective action; re-tests/inspections; deviations from the Contract Documents (including Design Drawings), • Take a proactive approach to quality workmanship and work-in-progress, • Ensure components meet project specifications, • Practice safety in accordance with applicable and site-specific standards Qualified professionals will also have: • Ability to communicate with colleagues and clients of all levels, • Experience working with Microsoft Office Suite, • Ability to read and understand construction drawings & specifications, • Reliable means of transportation & valid driver’s license, • Willingness to learn, • Works well with a team and individually, • Familiarity with construction industry codes, • Mathematical Knowledge - Using mathematics to solve problems., • Installation Oversight - Installing equipment, machines, to meet specifications., • Equipment Selection Oversight - Determining tools and equipment needed to do a job., • Ability to provide inspection reports in a timely manor, • Willingness to obtain additional certifications, • Works well with a team and individually MISTRAS Group, Inc. is committed to equal employment opportunity. Employment decisions including initial hiring and all matters involving the terms and conditions of employment will be made without regard to any protected class under applicable law. If hired, the employment relationship is “At-Will,” which means that employment can be terminated at any time, and for any reason, at the option of either the Company or the employee. Please direct questions about these policies to a MISTRAS Group, Inc. Human Resources representative. By submitting & signing , I hereby understand and agree to the terms and conditions of employment as outlined above. I certify that the responses and information provided in this application (including any other supporting documentation such as a cover letter, resume, or transcript) are true and accurate to the best of my knowledge. I understand that misrepresenting or omitting information requested is cause for dismissal at any time, without notice. I hereby give the Company permission to contact schools, previous employers (unless otherwise indicated), references, and others disclosed in my application. Note to Applicants: Smoking is prohibited in all indoor areas of the Company. Employees may use designated smoking areas (if established) in accordance with applicable state and local law. Rhode Island Applicants: The Company is subject to Chapters 29-38 of Title 28 of the General Laws of Rhode Island, and is therefore covered by the state’s workers’ compensation law. Initial (if applicable): Massachusetts Applicants: I understand that it is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Initial (if applicable): Maryland Applicants: I UNDERSTAND THAT UNDER MARYLAND LAW, AN EMPLOYER MAY NOT REQUIRE OR DEMAND, AS A CONDITION OF EMPLOYMENT, PROSPECTIVE EMPLOYMENT OR CONTINUED EMPLOYMENT, THAT ANY INDIVIDUAL SUBMIT TO OR TAKE A POLYGRAPH OR SIMILAR TEST. AN EMPLOYER WHO VIOLATES THIS LAW IS GUILTY OF A MISDEMEANOR AND SUBJECT TO A FINE NOT EXCEEDING $100. Mistras Group, Inc. is an Equal Opportunity Employer/Veterans/Disabled:

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is looking for experienced, highly motivated mechanical engineers to join its rapidly growing team. Mechanical engineers will have ownership of the mechanical design and development of primary and secondary components and subsystems in the development of Thea Energy’s stellarator fusion systems. You will be responsible for the structural and thermomechanical design, manufacturability, analysis, development, and commissioning of these components. The Thea Energy team is comprised of driven, creative, and fun individuals passionate about solving complex problems.Key Responsibility Areas: • Contribute to the design and development of primary and secondary mechanical fusion components and subsystems, • Produce mechanical engineering designs, drawings, specifications, and parameters from first principals with appropriate tolerances for vendor quoting and manufacturing, • Design tooling for assembly, • Perform thermal, structural, and electromagnetic analysis and simulation using Ansys and COMSOL, • Incorporate design for manufacturing principles and support first builds, • Support the implementation of tooling and manufacturing, • Design and execute qualification testing, • Communicate and collaborate with internal and external stakeholdersIdeal Experience & Skillsets:, • Minimum of a bachelor’s degree in mechanical engineering, aerospace engineering, physics, or related fields, • Experience designing, building, and commissioning custom systems, • Experience in mechanical engineering using CAD software (e.g. Solidworks, CATIA, NX, etc.), • Experience specifying machining, welding, and/or fabrication requirements, • Ability to decompose and solve complex problems, • Ability to take initiative and guide the design and analysis of complex components and systems with the aid of peers and team members, • Ability to execute and flourish in a fast-paced, rapidly changing environment, • Familiarity with GD&T (ASME Y14.5) & Drawing Standards, • Comfortable working to aggressive deadlines, • Exceptional work ethic, • Strong team member with clear communication and collaboration skillsCompany Benefits:, • Salary range $85,000-$150,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Senior Inspector – NJ DCA Reports to: Department Manager and/or Project Manager General Qualities: • Qualified NJ DCA Certified Special Inspector to support inspection services on construction projects throughout New Jersey., • This role is responsible for ensuring that all work complies with applicable codes, standards, and project specifications, while maintaining the highest levels of safety and quality., • 3–9 years of relevant inspection experience Technical Duties & Responsibilities: • Perform field inspections in accordance with NJ DCA regulations, project specifications, and applicable building codes, • Inspect construction activities including structural steel, welding, concrete, masonry, and fireproofing, • Verify compliance with approved plans, submittals, and contract documents, • Identify and report non-conforming work and coordinate corrective actions, • Prepare and submit detailed daily inspection reports and documentation, • Coordinate with contractors, engineers, and project stakeholders to ensure quality and compliance, • Bachelor’s degree in civil, Structural, or Geotechnical Engineering (preferred), • Structural Welding, • Structural Steel & Bolting, • Reinforced Concrete, • Structural Masonry, • Spray-Applied Fireproofing, • NJ DCA Special Inspector – Concrete Placement, • NJ DCA Special Inspector – Prestressed Concrete, • NJ DCA Special Inspector – Soils, • Nuclear Gauge Safety Certification (U.S. Department of Transportation), • OSHA 30 Certification Physical Requirement: • Ability to pass a physical exam for full mobility, • Capable of lifting and/or moving up to 50lbs carrying, and transporting equipment, samples, and materials, • Comfortable navigating active construction sites, including ladders, scaffolding, and uneven terrain, • Willingness to work in varying site conditions and project environments KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description We are seeking a skilled and experienced Auto Body A or B Technician to join our team. The ideal candidate is a self-starter who takes pride in high-quality repairs and has a deep understanding of structural integrity and vehicle aesthetics. You will be responsible for restoring vehicles to their pre-accident condition using industry-leading techniques. Responsibilities: * Perform high-quality body repairs, including panel replacement, dent repair, and component assembly. * Execute precision frame straightening and structural repairs to manufacturer specifications. * Utilize specialized welding techniques to ensure structural safety. * Diagnose and repair collision damage efficiently while maintaining a high standard of workmanship. * Maintain a clean and organized workspace to ensure safety and productivity. Qualifications: * Experience: Minimum of 5 years of professional experience in collision repair. * Skills: Proficient in frame work and advanced welding. * Tools: Must possess a complete set of professional-grade tools. * Certification: I-CAR or ASE certifications are a plus but not required. * Attributes: Strong attention to detail and the ability to work in a fast-paced environment.

Job DescriptionSuperintendent – Heavy Civil Steel Construction Highway, Bridge & Infrastructure Projects Compensation: $160,000 – $250,000 (based on experience) Employment Type: Full-Time | On-Site Work Authorization: U.S. Citizens only (no H-1B or sponsorship) Position Overview A leading national heavy civil general contractor is seeking an experienced Superintendent – Steel Construction to lead all on-site structural and miscellaneous steel erection activities on large-scale infrastructure projects. This role is critical to the successful delivery of highways, bridges, tunnels, and mass-transit systems. The Superintendent will serve as the senior field authority for steel operations, ensuring work is executed safely, efficiently, and in strict accordance with project plans, schedules, and quality standards. Key Responsibilities • Lead and supervise all structural and miscellaneous steel erection activities, including beams, columns, trusses, braces, stairs, railings, and connections, • Manage daily steel field operations, including crew productivity, equipment utilization, site logistics, and work sequencing, • Coordinate closely with Project Managers, Engineers, Fabricators, Erectors, and other trades to ensure timely delivery and installation of steel materials, • Develop and maintain short- and long-term steel erection schedules aligned with the overall project timeline, • Enforce OSHA regulations and company safety programs, promoting a zero-incident safety culture, • Conduct inspections to ensure compliance with AISC standards, project specifications, tolerances, and quality requirements, • Identify and resolve field issues proactively, including fit-up challenges, fabrication discrepancies, and trade conflicts, • Serve as the primary on-site point of contact for all steel-related coordination between field crews, management, and design teams, • Maintain accurate daily reports, progress tracking, inspection logs, and documentation, • 8+ years of hands-on experience in structural and miscellaneous steel erection within heavy civil or structural construction, • Proven leadership experience as a Superintendent, General Foreman, or Foreman on steel-intensive projects such as bridges, industrial facilities, or large infrastructure works, • Strong technical knowledge of:, • Steel erection sequencing, • Rigging and crane operations, • Welding and bolting procedures, • AISC standards and tolerances, • Ability to read and interpret structural drawings, shop drawings, and technical specifications, • Demonstrated ability to lead union and/or non-union crews effectively, • Strong communication, planning, and problem-solving skills, • Proficiency with construction management software (e.g., Procore) and Microsoft Office, • Valid driver’s license Preferred Qualifications • OSHA 30-Hour Certification, • NCCER or equivalent steel construction certifications, • High-authority field leadership role with significant impact on project success, • Competitive compensation tied directly to experience and responsibility, • Long-term stability with a firm known for delivering landmark transportation projects

Job DescriptionDescription: Report to: This project requires reporting to 102 Main Street, Port Monmouth, New Jersey 07758 every morning at 7am for field work assignment. Field work assignments are directed by USACE PM and Crawford PM. Requirements: Summary Scope: Provide field oversight professional services for USACE District on the following work areas, which include the installation of floodwalls and retaining walls, earthen levees, interior drainage features (swales, ponding areas, drainage, pipes), one pump station and outfall, generator building, road raising and utility relocation, development of permit applications and incidental related work. Essential Functions: Outside work environment consists of observing work activities such as construction installation, material storage, equipment usage, documenting progress with photos, documenting actions in QA daily report, documenting deficiencies, and compliance to codes and standards. Inside work environment consists of reviewing and commenting on contractor deliverables such as QC daily reports, schedule reports, meeting minutes, technical documents, request for information, submittal review, etc. in both hard copy or RMS computer database system. Competencies: Computer skills proficient with Microsoft Office suite of products Word, Excel, Adobe Acrobat, Scheduling software like Primavera P6, and Construction Database software like Procore, RMS, Newforma. Supervisory Responsibility: No supervisory responsibilities, works independently in the field. Reports to USACE Project Manager assigned at site and Crawford Project Manager assigned at Home Office. Work Environment: On a daily basis, the work environment requires a hard hat, eye glass protection, safety vest, gloves, and steel toed work boots for safety at all times. Long sleeve shirts worn around welding and electrical arc operations, otherwise clean short sleeve collared shirts and jeans are appropriate during field construction activities. Physical Demands: While performing professional oversight services, you will encounter uneven terrain, hills, water puddles, ruts, pitfalls, sumps, etc. during the daily walk inspections so watch for slips, trips, and falls. Prepare for heat and sun, by staying hydrated with water and wearing sunscreen lotion. No lifting over 25 lbs. Position Type/Expected Hours of Work: Works Monday – Friday, 6am to 3pm typically, minimum 8 hours per day. No overtime or weekend work is planned by the Client at this time. Travel: Yes, personal vehicle travel while onsite will be required and reimbursed at the Federal mileage rate, provided odometer backup log is acceptable. Required Education and Experience: Bachelor of Science Degree in Civil Engineer with 10+ years of experience with site/civil, geotechnical soils, structural abutments both steel and concrete reinforced. Masters degree in civil Engineer, Geotechnical, Construction Management preferred alternative. Additional Eligibility Qualifications: US Driver’s License Required, OSHA 40/30 Required, and US Passport Preferred. Must have valid personal vehicle insurance and registration every day to gain security access onsite. Work Authorization/Security Clearance: Yes, a Federal Background Security Clearance is required by USACE to obtain a Govt Common Access Card Badge and Govt usage of Secured Network. In addition, Crawford requires a Federal, State, and Local Background as part of its employment along with drug and alcohol testing. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. All employees with disabilities are encouraged to contact the Human Resources Coordinator to review and discuss the essential and nonessential functions of the job. An employee with a disability can evaluate the position in greater detail to determine if she/he may perform the essential functions of the job with or without reasonable accommodation. Crawford does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.

Job DescriptionDescription: KS Engineers, P.C. (KSE) is a mid-size engineering and construction management firm ranking in the ENR Top 500 for design and ENR Top 100 for construction management. We are headquartered in Newark, NJ, with regional offices in New York City and Newburgh, NY; Philadelphia and Pittsburgh, PA; Mount Laurel and Mount Arlington, NJ; and Rocky Hill, CT. The firm provides engineering, construction management, and land surveying services to both public and private sector clients. KSE offers a full range of employee benefits, including medical, dental and vision insurances, a 401(k) plan, paid time off, Flexible Spending Accounts (FSAs), long- and short-term disabilities, and term life insurance. KS Engineers, P.C. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Position: Special Inspector – AWS CWI / ICC Welding - NY Reports to: Project Manager Technical Responsibilities: • Inspect weldments to ensure compliance with applicable codes, standards, and specifications, • Review welding procedure specifications (WPS), welder qualification records, and inspection reports prior to the start of welding activities, • Verify compliance with contract documents, submittals, and construction drawings, • Oversee non-destructive testing (NDT) and ensure proper materials and procedures are in place, • Identify and report non-conformance issues (NCRs) to contractors and clients in a timely manner, • Prepare and submit detailed daily inspection reports, • Maintain accurate documentation of all inspection activities and findings, • Coordinate with project teams, contractors, and clients to ensure quality and compliance Applicable Building Codes: • BC 1704.3.1, • BC 1704.17, • BC 1704.18, • AWS Certified Welding Inspector (CWI) OR ICC Structural Steel & Welding Special Inspector Certification, • Entry-Level (3-5 years) or Mid-Level (6-9 years) with welding inspection experience, • Bachelor’s degree in engineering, Architecture, or related field (preferred), • Strong knowledge of welding codes, standards, and inspection procedures, • Excellent attention to detail and documentation skills Physical & Additional Requirement: • This position requires physical ability to perform field inspections, • Ability to work in diverse weather conditions, • Extended periods of standing and walking, possibly on uneven or challenging terrains, • Climbing, bending, kneeling, • Working long hours & Lift and carry up to 25 lbs., • Valid, clean driver’s license & must have a personal vehicle and be willing to travel daily to project sites across the NYC metro area, • Ability to transport inspection and testing equipment as needed KS Engineers, P.C. is an EOE/AA/VEV/Disabled Employer. KSE will not discriminate based on race, color, religion, creed, sex, national origin, marital status, age, disability, veteran status, citizenship status, or other status protected by law.

Job Description • Perform or witness concrete, masonry, steel bolting, post installed anchors and other activities on New York City construction projects, such as low to mid rise buildings, industrial, commercial, public, academic, and healthcare facilities., • Prepare and submit reports of inspection activities and other technical documentation, • File documentation and complete required technical report forms in accordance with the IBC, • Other duties as assigned, • Lead or participate in project meetings and conference calls., • Manage project documentation and status., • Perform Energy efficiency inspections in NY TR8Job Requirements:, • Bachelor s Degree in Engineering or Architecture is preferred, • At least 5 years of relevant experience as a construction or special inspector on progressively complex building/facility projects., • Proficiency in the use of standard Microsoft Office products and the ability to become competent with latest project related inspection software and reporting systems, • Excellent verbal and written communication skills, • Working knowledge and experience with structural design., • Ability to communicate as a valued team member with colleagues and clients of all levels, • Ability to provide inspection reports in a timely manner, • Reliable means of transportation and a valid drivers license, • Willingness to obtain additional certifications, • Work well with a team and individually, • Familiarity with construction industry codes, • Applicant must send at least 5 sample construction inspection reports from any of the below categories, • we seek individuals with one or more of the following certifications:, • AWS Certified Welding Inspector (AWS-CWI), • AWS Certified Associate Welding Inspector (AWS-CAWI), • ACI-1 - Concrete Construction Special Inspector (ACI-CCSI), • ICC Concrete Special Inspector (ICC-CSI), • ICC Commercial Mechanical, • ICC Pre-Stressed Concrete Special Inspector, • ICC Spray Applied Fire Proofing Special Inspector, • ICC Soils Special Inspector, • ICC Structural Masonry Special Inspector, • ICC Structural Steel and Bolting Inspector, • ICC Structural Welding Inspector (ICC-SWI), • Other desirable licenses include:, • NYS Licensed Professional Engineer or Registered Architect Flexible work from home options available.

Job DescriptionBenefits: • Company parties, • Competitive salary, • Assessing damage, • Thoroughly inspecting vehicles to identify the extent of structural damage, including frame alignment issues, major panel damage, and potential safety concerns, • Frame straightening, • Utilizing specialized equipment like frame machines and pulling tools to realign bent or twisted frames to factory specifications, • Panel replacement, • Removing and replacing severely damaged body panels like doors, fenders, hoods, and roof sections using cutting and welding techniques, • Welding repairs, • Performing complex welding procedures to join new metal sections to existing frame or body parts, including spot welding, MIG welding, and TIG welding, • Metal fabrication, • Shaping and fitting replacement metal panels to match the vehicle's original contours using hand tools and power tools, • Body panel alignment, • Ensuring proper fit and alignment of replaced panels to maintain the vehicle's aesthetics and functionality, • Preparation for paint, • Grinding, sanding, and filling repaired areas to create a smooth surface ready for paint application, • Collaboration with other technicians, • Working closely with the owner, other auto body technicians like painters and detailers to complete the overall repair processRequired skills and qualifications:, • 5 years or more of extensive experience in auto body repair is a requirement., • Ability to read, write and speak english fluently is a requirement, • A valid driver's license is required, • A strong understanding of vehicle construction, frame design, and collision repair techniques, • Advanced welding skills, • Proficiency in various welding methods, including MIG, TIG, and spot welding, • Metal fabrication skills, • Ability to shape and manipulate metal to create accurate replacements for damaged parts, • Precise measuring and alignment skills, • Accuracy in using measuring tools to ensure proper frame alignment and panel fit, • Physical strength and endurance, • Ability to handle heavy metal parts and perform demanding physical tasks, • Attention to detail, • High level of precision needed to achieve accurate repairs and quality finishes

Job DescriptionFounded in 1987, RAND Engineering & Architecture, DPC is an employee-owned 115+ person Manhattan-based firm that designs, specifies, and administers restoration, upgrade, and adaptive re-use programs on behalf of owners, managers, and co-op and condo boards. RAND is seeking a qualified, motivated, and entrepreneurial Inspector to help assist in the performance of Special, Progress, and Energy Inspections across all the teams at RAND. Inspections will take place on a vast variety of projects, such as Capital Improvement Programs, FISP Repairs, Sidewalk Vault Replacements, Parking Garage Repair Programs, Mechanical Upgrades, and Interior Renovations. Job Responsibilities/Duties include but not limited to: • Perform Special/Progress/Energy Inspections on current and upcoming projects throughout the NYC metro area, NJ, Long Island, and Westchester., • Must be able to read, understand, and interpret all construction plans/drawings, specifications, project schedules, submittals, shop drawings, and other project/contract documents, and perform on-site inspections to ensure compliance with all referenced documents, building codes, and industry standards., • Must be able to maintain meticulous records, including field notes, and prepare inspection reports in a timely manner., • Must have familiarity with the latest building codes, code-mandated construction compliance items, and industry standards., • Must be available to attend Pre-Construction Meetings, Progress Meetings, and progress and final inspections., • Must be able to immediately communicate all non-conformance items to the attention of the contractors, RAND Project Manager, and the Applicant of Record., • Must be able to communicate daily with project managers, contractors, and other Special Inspectors regarding the project status, inspection planning, and Special Inspection schedules., • Must have the ability to coordinate/communicate effectively with contractors, colleagues, clients, and project teams regarding construction project activities., • Must have a strong attention to detail., • Must be punctual and efficient., • Must have excellent verbal and written communication skills., • Must be able to comfortably maneuver through active construction sites at existing and new buildings, including crawl spaces, cellars/basements, interior spaces, facades, roofs, bulkheads, etc. and will be expected to perform inspections from suspended and supported (pipe) scaffolding, including ladders, baker scaffolds, and boom lifts., • Must have ability to perform multiple inspections on a daily basis., • Must have the ability to effectively work independently and collaboratively in a team environment, both with internally and externally parties., • Must be able to perform additional responsibilities as required by business needs., • Must have an entrepreneurial spirit in finding Special Inspection opportunities that support billing metrics., • Must have an understanding of the importance of utilization rates, billable hours, and profitability. Requirements: • Active certifications for all or some of the following credentials:, • ICC Concrete Special Inspector, • ACI Concrete Inspector, • ICC Masonry Special Inspector, • ICC Steel Bolting Special Inspector, • ICC Steel Welding Special Inspector, • AWS Steel Welding Inspector, • ICC Mechanical Systems Special Inspector, • ICC Sprayed Fire Resistant Materials Special Inspector, • Must have experience performing all or some of the following Special/Progress/Energy Inspections:, • Chimneys and Vents, • Heating Systems, • Mechanical Systems, • Sprinkler Systems, • Standpipe Systems, • Concrete Cast-In-Place, • Structural Stability - Alterations of Existing Buildings, • Structural Steel - Details, • Structural Steel - High Strength Bolting, • Structural Steel - Welding, • Exterior Insulation Finishing Systems (EIFS), • Fire-Resistant Penetrations and Joints - Firestop, • Masonry, • Post-Installed Anchors (Concrete & Masonry), • Sprayed Fire-Resistant Materials, • Wall Panels, Curtain Walls & Veneers, • Tenant Protection Plan Compliance, • Energy Code Compliance (Commercial & Residential), • Fire-Resistance Rated Construction, • Footing and Foundation, • Lowest Floor Elevation, • Public Assembly Emergency Lighting, • Structural Wood Frame, • Must have or be able to obtain the following certifications:, • 4-Hour Supported (Pipe) Scaffold User, • 16-Hour Suspended Scaffold User, • Must have documented proof of minimum relevant experience and certifications to perform the above-cited Special/Progress/Energy Inspections as required by the building codes., • Bachelor’s Degree in Architecture or Engineering preferred, but not required if candidate has relevant experience and certifications, as required by the building codes., • Registered Architect and/or Professional Engineer licensed in the States of New York and New Jersey is a plus, although not a requirement if qualified through supplemental education/certifications/experience. Life at RAND As an employee-owned business, at RAND, we believe great work starts with great people—and we take care of ours. Our comprehensive benefits package is designed to support you both professionally and personally, including: • Medical, dental, and company-sponsored vision coverage, • 401(k) with company match to invest in your future, • Long-term disability and life insurance, • Transit and parking benefits for easy commuting, • On-site exercise room and wellness perks like yoga classes, • Ongoing professional development and career growth opportunities, • Employee referral incentives, • A RAND Certified Project Management Program Powered by JazzHR j6aYDerzKK