Trabajos technical writing en Piscataway, New JerseyCrear alertas

Job Description Under minimal supervision, conducts preventive maintenance, repair, installation, commissioning, and general servicing of systems. Performs point to point check out to verify that controls systems have been installed properly. Completes assigned system commissioning and performs device verification. Troubleshoots and resolves HVAC mechanical, electrical, and controls problems. Properly completes required project documentation. Responds to service calls. Responsible for high levels of customer satisfaction through direct, on site, customer interface. Properly completes required project and service documentation. A key member of the Albireo team, the Service Systems Specialist will be responsible for providing the execution for HVAC Building Automation projects, to include: • Perform start up, checking, testing, system diagnostics and commissioning from system-level controllers to end devices for small to medium sized new or retrofit projects., • Perform preventative and predictive maintenance service activities to ensure optimal performance of system., • Provide emergency service and response to customer sites as dispatched., • Ability to troubleshoot, diagnose and repair and/or replace control components and controls systems. Also, the ability to troubleshoot mechanical, HVAC and electrical issues as related to the BAS Control system operation., • Load and update software on network controllers, field controllers, computers, and servers., • Understand complex control systems including diagnosing and troubleshooting networking and integration., • Perform and execute assigned work efficiently and professionally., • Communicate with customer upon arrival and before leaving the work site. Regularly with customer to become familiar with operating problems. Keep customer informed on the nature of service provided, outstanding issues and recommends system enhancements, upgrades, and or replacement. Promotes the sale of add-on work., • Train the customer in control systems operations including obtaining customer training form, providing training certificates., • Complete, compile and submit job documentation such as commissioning documentation, punch lists, etc. Mark up controls submittals to capture field changes and discrepancies for engineering to create As-Builts., • Interface with service manager, service project manager or subcontractors on projects to coordinate activities as required in an ethical and professional manner. Reports problems or changes to management immediately., • Assist sales by providing technical recommendations for sales leads and proposals for retrofits, upgrades and or enhancements to existing equipment. May assist with job layouts, • Complete and submit timely electronic documentation including but not limited to time sheets, expense reports, and on-site documentation., • Conduct extensive self-study (reading, research, and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. Requirements • Requires extensive knowledge of a variety of electronic or digital control systems, • Vocational School four-year program graduate or an Associate’s degree in electronics, mechanical systems, computer technology, air conditioning or similar field., • Degree may be offset by two years of experience in servicing electronic and or mechanical systems., • Two to four years of increasingly responsible experience in servicing electronic controls and HVAC equipment. Ability to coordinate the work of others on multiple job sites., • Effective interpersonal skills to represent the company to customers and other outside contacts ethically and professionally., • Must have experience in writing as well as demonstrated understanding of computer programs and software applications as related to the HVAC Industry., • Valid Driver’s license with a clean record. Benefits • Medical Insurance, • Dental Insurance, • Vision Insurance, • Basic Life Insurance, • Voluntary Life Insurance, • Short Term & Long-Term Disability, • Paid Vacation, • Paid Sick Time, • Paid Holidays, • 401K with Company match Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Quality - Project Coordinator Job Number: 26-00838 Be part of a company that delivers life-changing healthcare solutions. ECLARO is looking for a Quality - Project Coordinator for our client in New Brunswick, NJ. ECLARO’s client is a leader in the Biopharmaceutical Industry, providing quality, innovative, and affordable medicines that make a difference in the lives of patients all over the world. If you’re up to the challenge, then take a chance at this rewarding opportunity! Position Overview: Position provides administrative and project support to the Executive Director of Global Upstream and Cell Line Development, the Executive Director of Analytical Development and Attribute Sciences and the Senior Director of Potency and Impurities Analytical Development. This is a multi-site organization responsible for development of Client biologics products. The position requires mastery of the executive associate and project management function, including projection of a strong presence internally and externally with a high level of professionalism. Perform highly diverse administrative and project management duties, which involve senior level contacts and exposure to sensitive information requiring confidentiality, discretion, and good judgment, as well as the highest level of core behaviors. Responsibilities: Support the Executive Director of Global Upstream and Cell Line Development, the Executive Director of Analytical Development and Attribute Sciences, and the Senior Director of Potency and Impurities Analytical Development (~160 staff across multiple sites) Perform highly diverse, and often time-sensitive, complex administrative functions, projects, and tasks; work closely with Biologics Development Operations function to support organization administration & operations Manage calendars, schedule meetings, conferences, and events, makes domestic and international travel arrangements, file & manage expense reports, maintain accurate departmental records, and on-board & off-boards contractors and employees. Plan and manage year long calendar, site & vacation schedules for leadership team and department events; manage, coordinate and organize high level department meetings, townhalls, social events, including coordinating content and logistics; manage and keep upto date organizational SharePoint site. Manage meeting minutes in OneNote, send out surveys using MS suite tools or other tools Draft and send out communications to department; assemble townhall slide decks and manage overall communications; strong professional writing skills Must have a strong understanding of SharePoint, since will be responsible for upkeeping many pages Strong organizational skills, pay close attention to detail and follow-up, and properly balance priorities and resources. Coordinates across other operational and administrative staff in the organization Maintain a positive attitude, a high level of productivity, and is adaptable to change. Proactively look ahead at schedules, events, and needs of manager/team, anticipate conflicts, problems and issues, and take appropriate steps to produce desired outcomes with minimum assistance from supervisor. Interface in a professional manner with senior executives and staff, handle confidential information with discretion and demonstrate diplomacy and excellent judgment in dealing with sensitive situations. Anticipate key issues and implement action plans based on changing priorities and commitments. Prioritizes activities and takes action based on an understanding of departmental objectives and business needs. Maintains professional and technical knowledge by remaining current with Client continuous learning modules. High proficiency with MS Office Suite, SharePoint and strong learning agility to keep up with tools Required Qualifications: Require Associates Degree; BS highly desirable; educational experience may be substituted for appropriate and relevant experience. At least 5 years administrative or comparable experience. Prior Executive Associate or Project Coordinator experience preferred Highly motivated, independent thinker with proven problem solving and analytical skills. Ability to utilize technology effectively to support strategic initiatives and/or processes Ability to interact with colleagues at all levels of the organization. Must be highly proficient in various Client systems (or willing to learn rapidly) (Concur Travel/T&E, MS Teams, SAP, eSetup, Conf Room Scheduling, WorkDay, and Sharepoint) High proficiency in MS Office Suite (Outlook, PPT, Word, Excel, OneNote, Forms, MS Teams); high technology savviness or strong learning ability and willingness to learn Detail oriented with excellent oral and written communication skills. Adapts easily to new learning situations, can establish priorities, is very proactive, reliable and accountable, and works with minimal supervision. A collaborative team player who effectively builds relationships with team and other departments and can work independently. Demonstrates ability to prioritize, pro-actively work independently and collaboratively with other administrative assistants/external partners, across organizational levels, functions, and supports business needs across different time zones and during periods of heavy workload. Exhibits a positive work attitude, high productivity and a collaborative approach with other employees across a matrix and international environment. The expectation of all administrative assistants within Product Development team is that of true collaboration and partnership to ensure business needs/goals are met. Also required to provide back-up support as needed to cover planned vacations as well as unplanned absences. Pay Rate: $36.42-$38.63/Hour If hired, you will enjoy the following ECLARO Benefits: 401k Retirement Savings Plan administered by Merrill Lynch Commuter Check Pretax Commuter Benefits Eligibility to purchase Medical, Dental & Vision Insurance through ECLARO If interested, you may contact: Paul Quibuyen Christian.Quibuyen@eclaro.com 6466952942 Paul Quibuyen | LinkedIn Equal Opportunity Employer: ECLARO values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status, in compliance with all applicable laws.

Quality - Technical Writer Job Number: 26-00813 Be part of a company that delivers life-changing healthcare solutions. ECLARO is looking for a Quality - Technical Writer for our client in New Brunswick, NJ. ECLARO's client is a leader in the Biopharmaceutical Industry, providing quality, innovative, and affordable medicines that make a difference in the lives of patients all over the world. If you're up to the challenge, then take a chance at this rewarding opportunity! Position Overview: The Technical Writer and Document Specialist (TW/DS) will sit within the Cell Therapy Development (CTD) Project and Portfolio Management Office (PMO). This individual will be responsible for delivering CMC documentation (dossier and supporting documents) to support the regulatory strategy for a late-stage clinical cell therapy program. This role requires effective collaboration across technical functions to deliver on timelines for submissions. The position interfaces with experts in Process Development, Analytical Development, Cell Therapy Technical Ops, Quality and Regulatory Sciences across CTDO. Work effectively in cross-functional project teams to accomplish company goals. Responsibilities: Co-authors/ authors scientific content for CTD Quality sections aligned with regulatory strategy for clinical and life-cycle CMC regulatory submissions and responses to health authority questions based on high quality technical reports. Plan and facilitate submission kick-off for clinical regulatory submissions. Manage the logistical process and detailed timeline for regulatory submissions. Partner with SMEs across CTDO to identify source documents and align delivery of approved technical documents in accordance to project timelines and aligned with CTD requirements and regulatory strategy. Provide input and scientific oversight for content generation for Module 2.3 and 3. Must possess a thorough understanding of the source documentation requirements needed for regulatory submissions and the correlation to the authoring process. Review and adjudicate comments in collaboration with technical SMEs, facilitate comment resolution, revise draft sections. Ensure content clarity/ consistency in messaging across dossier. Facilitate and manage the data verification process. Assist with dossier creation and system compliance for regulatory submissions Coordinate response authoring, review and data verification to queries from HA for submissions. Track upcoming submissions and ongoing submission progress Maintain submission content tracker for regulatory submissions and work with doc specialist/PM/ Reg CMC to update tracker. Represent Tech Writing and Document management in cross-functional CMC teams as required. Collaborate and coordinate with CMC matrix team leaders to ensure timely submissions. Collaborate with external suppliers as needed for submission content and review. Support and implement continuous process improvement ideas and initiatives. Train others on procedures, systems access and best practices as appropriate. Mentor and train employees on the document management process Work independently under supervision and collaborate with other teams. Required Qualifications: Bachelor's degree or equivalent in Biology or related discipline with a minimum of 2 years' experience (4-7 years for senior level). Familiarity and understanding of regulatory requirements and guidance pertaining to CMC documentation is preferred; Cell therapy CMC experience required. Familiarity with eCTD structure for regulatory submissions is required; BLA experience is strongly preferred. Outstanding verbal and writing communication skills, strong attention to detail, planning, organizational and negotiating skills, demonstrated ability for timely delivery. Proficiency in commonly used Microsoft Office applications (Word, Excel, SharePoint, PPT) is required. Experience with computer-assisted document preparation tools is preferred along with proficiency in compliance ready standards for final publication. Experience in bio tech/pharma e2e product development required. Must be capable of working in a fast-paced changing team environment, prioritizing multiple tasks to meet filing deadlines. Take ownership of the section - formatting, language check, connections to other sections / tables. Works independently under supervision and collaborates with other team members from scientific functions, project management, document management in cell therapy and GPS organization. Pay Rate: $42.85-$45.45/Hour If hired, you will enjoy the following ECLARO Benefits: 401k Retirement Savings Plan administered by Merrill Lynch Commuter Check Pretax Commuter Benefits Eligibility to purchase Medical, Dental & Vision Insurance through ECLARO If interested, you may contact: June Binuya junethel.binuya@eclaro.com 2128047476 June Binuya | LinkedIn Equal Opportunity Employer: ECLARO values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status, in compliance with all applicable laws.

*Duration: 12 months contract, Full-Time • Employment Type: W-2 Job Description: • This role is responsible for leading change management and communications within the Project Delivery organization, ensuring alignment with the organizational change management framework used in CLIENT E&PS. From a change perspective they are responsible for capturing change impacts and developing mitigation plans and leader action plans to achieve successful organizational change and engagement. From a communications perspective they are responsible for developing and executing the in-function communication plan., • An ideal candidate for this role will have experience as a change management and communications practitioner, who is comfortable with complexity and ambiguity. Has the ability to quickly understand complex information and workout and maintain relationships with the right parties to contact to affect desired outcomes., • Key relationships include interfacing with global and regional leadership teams and their sub-organizations, E&PS Boards, E&PS Strategy, and collaborating with external partners to execute communications in alignment with overall change plan for readiness and go-live for programs. Responsibilities: • Lead Change Management and Communications within IAD (Insights, Analytics and Digital) in alignment with the organizational change management framework used in CLIENT E&PS, prepare global, regional and functional change management strategy; develop and execute change management plan., • Track success of change management and communications by using existing performance measures and identify new measures where necessary., • Capture, develop and validate all change impacts on employees and on the business., • Develop mitigation plans that address leader and stakeholder engagement, communications, and training recommendations., • Develop and execute regional change management and communications strategy and plans to include leadership action plans, stakeholder/end-user engagement plans, communications plan, and change impacts and mitigation plans., • Maintain global and regional stakeholder and business leadership list of CLIENT end users., • Collaborate with internal and external partners to execute change and communications in alignment with overall change plan for readiness and go-live of programs. This includes, but is not limited to: writing targeted communications to stakeholders (at different levels of organization), developing program status updates, sharing ways the business can achieve the project benefits, creating project toolkits (PowerPoint decks for awareness, readiness, and understanding), making management presentations, designing and executing change readiness surveys, conducting change network meetings, developing FAQs (frequently asked questions), creating marketing materials and content for website updates (if applicable), utilizing digital signage, and creating and providing End User training support, developing quarterly functional employee engagement channels, contributing to global E&PS engagement channels., • Adhere to CLIENT and E&PS communications and branding guidelines when using branding for company, organization, and program., • Lead, coordinate, and support regional engagement activities such as town halls, industry celebrations, and other regional events., • Support quarterly global E&PS Town Halls (on behalf of IAD if needed), interfacing with E&PS Strategy team and the regional teams to identify topics, develop content/slides, interface with guest speakers and potentially help develop videos with local video production companies., • Create monthly / quarterly newsletters, interfacing with E&PS Strategy and the functional teams to identify topics and write compelling articles and/or produce other forms of content including videos. Experience: • Change Management and Communications experience, • Good management and strong technical skills, • Strong communication skills both written and oral, • Ability to focus strategically while maintaining tactical focus, • Ability to adapt emerging best practices and industry innovations Skills: • Computer skills, including working knowledge of MS Office suite and SharePoint on Microsoft 365, • Excels with powerpoint, program management and organizationEducation:, • Bachelors preferred About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit www.ustechsolutions.com. US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring.

$45 - $65/hourpayAbout micro1micro1 connects domain experts to the development of frontier AI models. Real-world expertise is turned into training data, evaluations, and feedback loops that improve how models perform. AI labs and enterprises use micro1 to train models and build reliable AI agents through advanced evaluations and reinforcement learning environments. Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality contributions at scale.Our goal is to enable 1 billion people to do meaningful work by applying their expertise to AI. We’ve raised $40M+ in funding, and our AI recruiter has powered over 1 million AI-led interviews as our global network of experts grows into the human intelligence layer for AI. Job Title: Consultant Expert Job Type: Contractor Location: Remote Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. Key Responsibilities: • Leverage your specialized industry knowledge to provide critical input and feedback for AI system training and evaluation., • Review, edit, and generate written materials in Word and PDF formats, ensuring content aligns with professional standards in your field (legal, government communications, healthcare, etc.)., • Assess the accuracy, clarity, and relevance of technical or domain-specific documents utilized by AI models., • Collaborate with a dynamic remote team to improve model performance and reliability through hands-on assessments., • Communicate findings and recommendations clearly and professionally, both in written reports and verbal discussions., • Stay current with trends and best practices within your domain to ensure AI learning remains relevant and up-to-date. Required Skills and Qualifications: • Exceptional written and verbal communication skills, with a proven ability to articulate complex concepts clearly., • Expertise in a specialized field where professional writing and document review are core components (e.g., legal, government, healthcare)., • Experience working with Word and PDF formats for professional documentation., • Minimum 3 years of relevant industry or domain experience., • Master’s, PhD, or JD from a recognized university, or equivalent practical expertise., • Experience working within Fortune 500 companies or other highly recognizable brands., • Strong attention to detail and analytical abilities. Preferred Qualifications: • Track record of producing or reviewing regulatory, policy, or compliance documents., • Experience with cross-functional or cross-disciplinary project teams in a remote environment., • Published papers, thought leadership, or formal recognition within your area of expertise.

*Duration: 12 months contract, Full-Time • Employment Type: W-2 Job Description: • This role is responsible for leading change management and communications within the Project Delivery organization, ensuring alignment with the organizational change management framework used in CLIENT E&PS. From a change perspective they are responsible for capturing change impacts and developing mitigation plans and leader action plans to achieve successful organizational change and engagement. From a communications perspective they are responsible for developing and executing the in-function communication plan., • An ideal candidate for this role will have experience as a change management and communications practitioner, who is comfortable with complexity and ambiguity. Has the ability to quickly understand complex information and workout and maintain relationships with the right parties to contact to affect desired outcomes., • Key relationships include interfacing with global and regional leadership teams and their sub-organizations, E&PS Boards, E&PS Strategy, and collaborating with external partners to execute communications in alignment with overall change plan for readiness and go-live for programs. Responsibilities: • Lead Change Management and Communications within IAD (Insights, Analytics and Digital) in alignment with the organizational change management framework used in CLIENT E&PS, prepare global, regional and functional change management strategy; develop and execute change management plan., • Track success of change management and communications by using existing performance measures and identify new measures where necessary., • Capture, develop and validate all change impacts on employees and on the business., • Develop mitigation plans that address leader and stakeholder engagement, communications, and training recommendations., • Develop and execute regional change management and communications strategy and plans to include leadership action plans, stakeholder/end-user engagement plans, communications plan, and change impacts and mitigation plans., • Maintain global and regional stakeholder and business leadership list of CLIENT end users., • Collaborate with internal and external partners to execute change and communications in alignment with overall change plan for readiness and go-live of programs. This includes, but is not limited to: writing targeted communications to stakeholders (at different levels of organization), developing program status updates, sharing ways the business can achieve the project benefits, creating project toolkits (PowerPoint decks for awareness, readiness, and understanding), making management presentations, designing and executing change readiness surveys, conducting change network meetings, developing FAQs (frequently asked questions), creating marketing materials and content for website updates (if applicable), utilizing digital signage, and creating and providing End User training support, developing quarterly functional employee engagement channels, contributing to global E&PS engagement channels., • Adhere to CLIENT and E&PS communications and branding guidelines when using branding for company, organization, and program., • Lead, coordinate, and support regional engagement activities such as town halls, industry celebrations, and other regional events., • Support quarterly global E&PS Town Halls (on behalf of IAD if needed), interfacing with E&PS Strategy team and the regional teams to identify topics, develop content/slides, interface with guest speakers and potentially help develop videos with local video production companies., • Create monthly / quarterly newsletters, interfacing with E&PS Strategy and the functional teams to identify topics and write compelling articles and/or produce other forms of content including videos. Experience: • Change Management and Communications experience, • Good management and strong technical skills, • Strong communication skills both written and oral, • Ability to focus strategically while maintaining tactical focus, • Ability to adapt emerging best practices and industry innovations Skills: • Computer skills, including working knowledge of MS Office suite and SharePoint on Microsoft 365, • Excels with powerpoint, program management and organizationEducation:, • Bachelors preferred About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit _. US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. AI Statement: By applying, you acknowledge that AI-assisted tools may be used during hiring.

$20 - $70/hourpayLibrespritePixel ArtGraphic DesignIllustrationmicro1 is the leading AI data lab for training frontier models and evaluating AI agents. Experts contribute their diverse subject matter knowledge across domains such as finance, healthcare, STEM engineering, and more. micro1 transforms that real-world expertise into high-quality training data, evaluations, and feedback loops that improve how AI systems learn, reason, and perform. Our platform identifies and vets top talent through an AI recruiter, enabling high-quality expert contributions at scale. We aim to enable 1 billion people to do meaningful work by applying their expertise to AI. As our global expert network grows, micro1 is building the human intelligence layer for frontier AI. Job Title: LibreSprite Expert Job Type: Contract Location: Remote Job Summary: In this role, you'll apply your expertise to help train next-generation AI systems. Your work will shape how models learn, reason, and perform through high-quality, real-world input. No prior experience in AI is required — your domain knowledge is what matters. Key Responsibilities: • Drive complete pixel art and animation projects from concept through final asset export using LibreSprite., • Demonstrate real-time animation previews, refining motion and timing to studio-quality standards., • Utilize onion skinning, layers, and complex sprite composition features to create smooth, dynamic animations., • Design and develop cohesive asset sets, sprite sheets, character animations, tilesets, UI elements, and retro-style illustrations., • Leverage tiled drawing mode, palette customization, and pixel-precise tools for intricate patterns and detail work., • Export optimized sprites and animations in required production formats, adhering to technical and artistic specifications., • Clearly articulate workflow decisions, creative choices, and technical approaches—both in writing and verbally. Required Skills and Qualifications: • Expert-level proficiency with LibreSprite, with a proven track record of production usage., • Strong portfolio showcasing professional pixel art, animation, and graphic design., • Exceptional written and verbal communication skills, able to explain concepts and workflow logic clearly., • Experience independently managing end-to-end projects, from concept through asset delivery., • Deep understanding of sprite composition, animation techniques, and stylistic nuances in pixel art., • Proficient in customizing color palettes, tile creation, and managing complex layers and animation frames., • Ability to work autonomously within a remote, collaborative environment. Preferred Qualifications: • Prior experience capturing or teaching creative workflows for training, tutorials, or educational initiatives., • Familiarity with retro game art pipelines or production environments., • Experience contributing to open-source or collaborative art projects.

Pay Rate: $46.50/hr on w2 (No C2C or 3rd parties) Location: onsite in New Brunswick, N • J This role is responsible for leading change management and communications within the Project Delivery organization, ensuring alignment with the organizational change management framework used. From a change perspective they are responsible for capturing change impacts and developing mitigation plans and leader action plans to achieve successful organizational change and engagement. From a communications perspective they are responsible for developing and executing the in-function communication pla • n.An ideal candidate for this role will have experience as a change management and communications practitioner, who is comfortable with complexity and ambiguity. Has the ability to quickly understand complex information and workout and maintain relationships with the right parties to contact to affect desired outcome, • s.Key relationships include interfacing with global and regional leadership teams and their sub-organizations, Boards, Strategy, and collaborating with external partners to execute communications in alignment with overall change plan for readiness and go-live for program s. Roles and Responsibilit • iesLead Change Management and Communications within IAD (Insights, Analytics and Digital) in alignment with the organizational change management framework used, prepare global, regional and functional change management strategy; develop and execute change management pl, • an.Track success of change management and communications by using existing performance measures and identify new measures where necessa, • ry.Capture, develop and validate all change impacts on employees and on the busine, • ss.Develop mitigation plans that address leader and stakeholder engagement, communications, and training recommendatio, • ns.Develop and execute regional change management and communications strategy and plans to include leadership action plans, stakeholder/end-user engagement plans, communications plan and change impacts and mitigation pla, • ns.Maintain global and regional stakeholder and business leadership list of end use, • rs.Collaborate with internal and external partners to execute change and communications in alignment with overall change plan for readiness and go-live of programs. This includes, but is not limited to: writing targeted communications to stakeholders (at different levels of organization), developing program status updates, sharing ways the business can achieve the project benefits, creating project toolkits (PowerPoint decks for awareness, readiness, and understanding), making management presentations, designing and executing change readiness surveys, conducting change network meetings, developing FAQs (frequently asked questions), creating marketing materials and content for website updates (if applicable), utilizing digital signage, and creating and providing End User training support, developing quarterly functional employee engagement channels, contributing to global engagement channe, • ls.Adhere to company’s communications and branding guidelines when using branding for company, organization, and progr, • am.Lead, coordinate, and support regional engagement activities such as town halls, industry celebrations, and other regional even, • ts.Support quarterly global Town Halls (on behalf of IAD if needed), interfacing with Strategy team and the regional teams to identify topics, develop content/slides, interface with guest speakers and potentially help develop videos with local video production compani, • es.Create monthly / quarterly newsletters, interfacing with Strategy and the functional teams to identify topics and write compelling articles and/or produce other forms of content including vide os. Requi • red:Change Management and Communications experi, • enceGood management and strong technical sk, • illsStrong communication skills both written and, • oralAbility to focus strategically while maintaining tactical f, • ocusAbility to adapt emerging best practices and industry innovat, • ionsComputer skills, including working knowledge of MS Office suite and SharePoint on Microsoft, • 365Excels with PowerPoint, program management and organiza tion Prefe • rred:Change management efforts including communication, preparing organization for bus, • inessTransformation, influencing others and cross function project manag, • ementExperienced change management practitioner, who is comfortable with complexity and ambi, • guityProject management and reporting exper, • ienceAbility to quickly understand complex information and work out the right parties to co, • ntactStrong record of collaboration ensuring completion of pro, • jectsAbility to coordinate within organizations and teams of varying size, complexity, and needs with agility and excel lence

JOB TITLE: Technical writer Location: New Brunswick, NJ (50% Onsite) Duration: 12 months initial (potential extension/potential right to hire) Work Schedule: normal business hours Travel: Occasionally to other local NJ sites for larger team meetings.(2-3 times a year) Job Description The Technical Writer and Document Specialist (TW/DS) will sit within the Cell Therapy Development (CTD) Project and Portfolio Management Office (PMO). This individual will be responsible for delivering CMC documentation (dossier and supporting documents) to support the regulatory strategy for a late-stage clinical cell therapy program. This role requires effective collaboration across technical functions to deliver on timelines for submissions. The position interfaces with experts in Process Development, Analytical Development, Cell Therapy Technical Ops, Quality and Regulatory Sciences across CTDO. The successful candidate will work effectively in cross-functional project teams to accomplish company goals. o Primary Responsibilities: o Co-authors/ authors scientific content for CTD Quality sections aligned with regulatory strategy for clinical and life-cycle CMC regulatory submissions and responses to health authority questions based on high quality technical reports. o Plan and facilitate submission kick-off for clinical regulatory submissions. o Manage the logistical process and detailed timeline for regulatory submissions. o Partner with SMEs across CTDO to identify source documents and align delivery of approved technical documents in accordance to project timelines and aligned with CTD requirements and regulatory strategy. o Provide input and scientific oversight for content generation for Module 2.3 and 3. o Must possess a thorough understanding of the source documentation requirements needed for regulatory submissions and the correlation to the authoring process. o Review and adjudicate comments in collaboration with technical SMEs, facilitate comment resolution, revise draft sections. o Ensure content clarity/ consistency in messaging across dossier. o Facilitate and manage the data verification process. o Assist with dossier creation and system compliance for regulatory submissions o Coordinate response authoring, review and data verification to queries from HA for submissions. o Track upcoming submissions and ongoing submission progress o Maintain submission content tracker for regulatory submissions and work with doc specialist/PM/ Reg CMC to update tracker. o Represent Tech Writing and Document management in cross-functional CMC teams as required. o Collaborate and coordinate with CMC matrix team leaders to ensure timely submissions. o Collaborate with external suppliers as needed for submission content and review. o Support and implement continuous process improvement ideas and initiatives. o Train others on procedures, systems access and best practices as appropriate. o Mentor and train employees on the document management process o Work independently under supervision and collaborate with other teams. o Competencies & Experiences o Bachelor's degree or equivalent in Biology or related discipline with a minimum of 2 years' experience (4-7 years for senior level). o Familiarity and understanding of regulatory requirements and guidance pertaining to CMC documentation is preferred; Cell therapy CMC experience required. o Familiarity with eCTD structure for regulatory submissions is required; BLA experience is strongly preferred. o Outstanding verbal and writing communication skills, strong attention to detail, planning, organizational and negotiating skills, demonstrated ability for timely delivery. o Proficiency in commonly used Microsoft Office applications (Word, Excel, SharePoint, PPT) is required. o Experience with computer-assisted document preparation tools is preferred along with proficiency in compliance ready standards for final publication. o Experience in bio tech/pharma e2e product development required. Must be capable of working in a fast-paced changing team environment, prioritizing multiple tasks to meet filing deadlines. o Take ownership of the section – formatting, language check, connections to other sections / tables. o Works independently under supervision and collaborates with other team members from scientific functions, project management, document management in cell therapy and GPS organization. If hired, you will enjoy the following Eclaro Benefits: • 401k Retirement Savings Plan administered by Merrill Lynch, • Commuter Check Pretax Commuter Benefits, • Eligibility to purchase Medical, Dental & Vision Insurance through Eclaro If you feel you are qualified with the required skills and if you are interested, please free to send your word version most updated resume TAILORED to the job description above to June@eclaro.com or call (212)804-7476. Equal Opportunity Employer: Eclaro values diversity and does not discriminate based on Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status, in compliance with all applicable laws.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Morton Williams banners in New Jersey, New York, Connecticut, Pennsylvania, Maryland, Delaware, Massachusetts, New Hampshire and Rhode Island. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. About You Summary The Digital Product Lead serves as a strategic architect, responsible for steering a defined portfolio within the broader product roadmap. This role drives prioritization of high-impact initiatives and translates business objectives into detailed technical requirements across digital ecosystems—including web (.com) and mobile applications. We are looking for a strategic and user-focused Digital Product Lead to drive the vision, development, and optimization of our eCommerce platforms. This role will be responsible for leading digital product initiatives that enhance the customer experience, increase conversion rates, and support revenue growth across our digital channels. The ideal candidate will work cross-functionally with UX/UI, engineering, marketing, analytics, and merchandising teams to deliver seamless and innovative online shopping experiences aligned with business goals. Core Functions • Drive Strategic Planning: Translate high-level business goals into actionable product concepts, detailed roadmaps, and functional specifications, • Lead Cross-Functional Innovation: Partner with designers, engineers, and brand stakeholders to ideate and deliver best-in-class user experiences and drive sales that resonate across all digital touchpoints., • Champion a Test-and-Learn Culture: Embrace experimentation by identifying areas for innovation, designing pilot programs, and rapidly iterating based on data-driven insights., • Oversee User Acceptance Testing: Lead comprehensive UA testing efforts to ensure product quality, alignment with business intent, and seamless user interaction., • Define and Measure Success: Establish KPIs and benchmarks that align with industry standards, using them to evaluate performance and guide continuous improvement., • Promote Consistency at Scale: Support efforts to align product features and experiences across brand banners and platforms, fostering cohesion and improving operational efficiency. Knowledge and Skills Requirement • 4-year College degree required, additional PMP certification a plus, • 5+ years in digital product management, with a strong track record across mobile apps, web platforms, and e-commerce ecosystems, • Solid understanding of front-end and back-end development processes, • Familiarity with APIs, content management systems, and mobile operating systems (iOS/Android), • Experience writing or translating functional specs and user stories for engineering teams, • Strong product vision with the ability to prioritize for impact, • Comfortable building roadmaps and balancing short-term wins with long-term investments, • Adept at driving alignment across diverse teams—design, engineering, marketing, and leadership, • Confidence in defining KPIs and using data to optimize product performance, • Experience with A/B testing tools, dashboards, or product analytics platforms, • Proactive, solution-oriented, and calm under pressure, • Exceptional written and verbal communication skills Physical Demands and Work Environment • Availability to work a varied, flexible schedule to meet business demands, • Ability to sit/stand in front of a computer for long periods of time, • Ability to adhere to the company’s four day a week in office work requirement, • Ability to travel as required Compensation and Benefits The salary range for this position is $75,000-$105,000 annually. Placement in the range depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match & annual company contribution, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements. About The Work This job description is intended to set forth the general nature and essential duties and responsibilities of the work performed by associates for this position. It may not contain a comprehensive inventory of all duties, responsibilities, and qualifications required of associates to do this job.Associates may be assigned additional responsibilities as necessary. The Company reserves the right to revise this job description at any time and to require associates to perform other tasks as circumstances or conditions of its business, competitive considerations or the work environment changes. This document describes the position currently available and is not an employment contract. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. If requested, reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The position covered by this Job Description is expressly declared to be “at will,” meaning Wakefern has the right to terminate the incumbent’s employment at any time, with or without cause. Any written or oral promises or representations to the contrary are expressly disavowed and should not be relied upon by any associate. Any change to this “at will” employment status must be in writing and signed by the Vice President of Human Resource.

Job Description Job Summary: We are looking for a skilled Business Analyst with strong expertise in writing detailed JIRA user stories and hands-on knowledge of SAP Business Technology Platform (BTP). The ideal candidate will bridge business needs with technical solutions, ensuring clear requirements documentation and effective collaboration across teams. Key Responsibilities: • Gather, analyze, and document business requirements from stakeholders, • Translate requirements into clear, concise, and well-structuredJIRA user stories, including acceptance criteria (using Agile/Scrum practices), • Collaborate with product owners, developers, and testers to ensure accurate implementation, • Facilitate backlog grooming, sprint planning, and requirement walkthrough sessions Required Skills & Qualifications: • Strong expertise inwriting JIRA user stories, epics, and acceptance criteria, • Good understanding ofSAP BTP (integration, extensions, or data services), • Experience with Agile/Scrum methodologies and ceremonies, • Excellent communication and stakeholder management skills, • Strong analytical and problem-solving abilities

Job Description Position Overview Harris Energy Solutions (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, and Building Retro-Commissioning. We pride ourselves in the work we perform and the services we provide. HES is hiring a Senior Energy Engineer with proven proficiency in Energy Audits & Commissioning work to join our team. Proficiency in Energy Audits & Commissioning work is a mandatory requirement for this role. Candidates without direct Energy Audits & Commissioning work experience will not be considered. Responsibilities • Energy Modeling, • Lead the development and implementation of advanced energy models to support forecasting, scenario analysis, and energy market strategies., • Oversee the modeling team, ensuring accuracy, efficiency, and alignment with company goals., • Collaborate with cross-functional teams to integrate modeling insights into broader company initiatives., • Perform drawing reviews to identify applicable building components, • Compile data for inputs into building energy modeling software, • Execute building modeling, • Perform ASHRAE Level I/II/III Energy Audits, • Analyze utility bills and drawings to identify building energy consumption, • Conduct onsite energy audits of complex building systems, • Identify Energy Conservation Measures, • Perform energy savings and cost analyses for projects, • Generate a technical report for deliverables to clients, • Supervise energy services personnel, which includes work allocation, training, promotion, and enforcement of internal procedures and control, and problem resolution; evaluate performance and make recommendations for personnel actions; motivate employees to achieve peak productivity and performance Requirements • Proficiency in Energy Audits & Commissioning work is required. Candidates without demonstrated experience in Energy Audits & Commissioning work will not be considered., • A valid Professional Engineer (PE) license, • Bachelor's degree in Engineering (Mechanical, Electrical, or Facilities), • 6 years of experience in the Energy Engineering field, • Experience with building energy modeling techniques, • Proficient in Microsoft Office, • Understanding of energy efficiency technologies, HVAC systems, and renewable systems, • Experience with large commercial and multi-family buildings, • Ability to travel throughout the United States Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and without a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time (40 hours per week) Pay: $100,000.00 - $120,000.00 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: 8 hour shift Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Audit to join our team. The Energy Engineer (Energy Audit) will lead the technical execution of ASHRAE Level I, II, and III energy audits across commercial, institutional, and multi-family buildings. This role focuses on identifying Energy Conservation Measures (ECMs), quantifying savings opportunities, and producing high-quality client deliverables that drive energy efficiency and decarbonization outcomes. Responsibilities • Perform ASHRAE Level I/II/III Energy Audits: Analyze utility bills (electric, gas, steam, water) and architectural, mechanical, electrical, and plumbing drawings to baseline building energy consumption., • Conduct Onsite Audits: Lead and support field investigations of building envelope, HVAC equipment, lighting, domestic hot water, plug loads, and building automation systems using hand tools, light meters, data loggers, and infrared cameras., • Identify Energy Conservation Measures (ECMs): Develop a comprehensive list of viable ECMs tailored to the facility, occupancy, and client goals, including operational, capital, and decarbonization measures (e.g., electrification, heat pumps)., • Perform Energy and Cost Analyses: Calculate energy and demand savings using engineering calculations, bin analysis, spreadsheet tools, and/or simplified energy models; develop installed cost estimates and financial metrics (simple payback, ROI, NPV, IRR)., • Generate Technical Reports: Author client-ready audit reports including executive summaries, ECM write-ups, savings tables, recommendations, and supporting appendices., • Support Utility Incentive and Decarbonization Programs: Prepare documentation supporting utility incentive applications (e.g., NYSERDA, ConEd, NJ Clean Energy) and local carbon legislation compliance (e.g., NYC Local Law 97, BERDO)., • Client and Project Coordination: Coordinate site visit logistics, communicate progress to project managers and clients, and respond to client questions during and after the audit. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Architectural, or Facilities), • 1-3 years of experience performing energy audits or energy engineering work, including at least one internship, co-op, or full-time role, • Working knowledge of HVAC systems, lighting systems, building envelope, controls, and renewable systems, • Familiarity with ASHRAE Procedures for Commercial Building Energy Audits, • Experience using audit tools (data loggers, light meters, IR cameras, combustion analyzers) preferred, • Proficient in Microsoft Office (especially Excel), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CEM, or CEA credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to grow, we're focused on building a team of high-performing professionals who are ready to lead, collaborate, and push what's possible. At Apex, you don't just join a company, you help shape what comes next. Position: Industrial Hygiene Professional Industry: Science Technical Location: Iselin, NJ Apex Companies, LLC seeks candidates for a full-time, experienced Industrial Hygienist to provide personnel and area exposure assessment services to local, regional, and national clients. Qualified candidates must have the skill, technical experience and training to self-perform or manage industrial hygiene projects ranging from small to large. All candidates must be capable of researching and accurately referencing standards (e.g., OSHA, ACGIH, etc.) and have a working knowledge of health and safety regulations and best practices. Additional requirements include developing cost estimates, preparation of proposals and sampling plans, advising and mentoring junior level staff as well as managing/interfacing with clients (building of relationships). Strong interpersonal and writing skills are necessary. OSHA and previous consulting experience are required. Your Responsibilities as an Industrial Hygiene Professional: You will be responsible for evaluating workplace health exposure risks for a wide variety of clients in various industries. Qualified candidates should have experience performing the following tasks: • Conduct qualitative exposure assessments, including basic characterization, identification of similar exposure groups, and development of sampling plans., • Plan and conduct industrial hygiene sampling surveys for chemical, physical and biological hazards., • Interpret exposure monitoring results and develop appropriate recommendations to control exposures., • Author detailed technical reports supported with sampling, analysis, and/or evaluation data; citation of applicable references, and recommendations to remove or manage the exposure risk., • Recognize and investigate the potential for health effects associated with chemical agents without authoritative occupational exposure limits., • Defines fundamental concepts of inferential and deterministic statistics in order to select appropriate statistical tools (both parametric and non-parametric) to determine exposure outcomes., • Applies statistical techniques to analyze exposure trends over time., • Defines strategies for ongoing exposure monitoring to assure timely identification of deviations in exposure profiles and to ensure controls continue to be effective., • Assesses compliance with state and/or federal health-based standards., • Develops and presents industrial hygiene training programs at client sites., • Supports the performance of indoor environmental quality investigations. What we're looking for: • BS in Industrial Hygiene, Environmental Science, or other related field., • CIH is preferred, • Client facing skills with ability to grow opportunities., • MS or MSPH or MPH preferred but not needed., • 6+ years of experience providing industrial hygiene consulting services or management of industrial hygiene programs including technical writing, technical oversight, and project management., • Certification or eligibility to earn certification in the comprehensive practice of industrial hygiene (CIH) from the American Board of Industrial Hygiene., • Ability to mentor and train staff., • Strong technical writing and communication skills., • Strong safety awareness and a good record and understanding of safe work practices., • Proficiency with Microsoft Office suite. Why you'll love working with us: • Company-subsidized medical and dental, • Company-paid life, short, and long-term disability, • 401k match, tuition assistance, and more, • Cross-training and the ability to work on a variety of projects, • Performance-based bonuses or other incentives, • Working with the best and brightest in the industry, • 2,000+ employee national firm with 70+ locations across the US #LI-MW1 Apex Job Title: Project Manager Req ID: 11573 Annual Expected Pay Range$100,000—$120,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job DescriptionR&G US Inc. is a leading Contract Research Organization (CRO) providing full services for clinical trial and entire drug life cycle. Led by former FDA experts and industry experts, R&G US can provide end-to-end services in strategic planning, clinical trial design, statistical analysis, SAS programming, data management, medical writing, medical monitoring, pharmacovigilance, and Data Monitoring Committee services. R&G US had extensive experience to support submissions to FDA, EMA, PMDA and NMPA. R&G US's goal is to provide the best service to the clients and work as one team to lower costs, shorten development time, and increase the success probability of products. You may find more information at www.rgpharmaus.com. If you are interested, please email your CV to: info@rgpharmaus.com. As a biostatistical/SAS programmer I, you are responsible for the following tasks: • Develop SAS programs for SDTM, ADaM, Tables, Listings and Graphs of low complexity in support of the Statistical Analysis Plan., • Support data management by generating data listings., • Perform quality control of low- complexity tasks., • Develop proficiency in technical/programming skills., • Maintain documentation as appropriate. Minimum Requirements: • M.S. in biostatistics and statistics., • Excellent oral and written communication skills in English., • Hands on SAS skills in Base and advanced SAS, basic Macro programming, SAS/STAT and R. Citizenship:, • US citizens and permanent residence are preferred.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of material handling, conveying, loading, palletizing, packaging, sortation, and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Manager role in the Products line of business is a hands-on position requiring excellent project management, technical, organizational and communication skills. This position is responsible for the planning, management, and execution of the Products segment within North America in the applicable industries such as cement, building materials, alternative fuels and raw materials, consumer goods, and petrochemical industry. Primary Responsibilities • Early engagement with the Sales and engineering team during tendering / sales phase, • Execution of new sales projects from contract signed to handover to customer as well as BEUMER's Customer Support department., • Managing a portfolio of projects in different industries – ranging from $ 50,000 to approx. $ 5,000,000 within the Product Business CoC network. • Organizing the projects through the BEUMER Stage Gate model with planning, specifications, design, production, installation/commissioning planning and agreements to execute within the agreed time frame., • Proactive and effective communication with customers, stakeholders, and the project team to ensure transparency, clarity and commitment throughout the project., • Lead a multi-disciplined project team throughout the complete project life cycle in coordination with other entities across BEUMER Group., • Mange key project management processes such as Scope/requirements management, Supply chain management, change management, risk management, etc., • Being proactive, identify, and manage opportunities and risks continuously with the right engagement level of the project stakeholders, manage potential back charges and claims and create essential documentation., • Responsible for the overall project delivery, quality/capacity wise, technically, time frame and financially., • Develop and update project schedule, • Create financial reporting and control the project budget, • Technical clarification with the project engineering team and support to site during installation, commissioning, and final testing., • Compiling report, track project tasks, update monthly status reports, • Coordination and preparation for meetings with customers as well as for internal alignment / reporting, • Follow up on action points and expedite critical activities, • Keep project documents updated and manage changes with the project team, • Support the QSHE department to ensure project health, safety and environmental standards meet or exceed legislated requirements and company policy., • Efficiently close out projects incl. making sure all customer documentation is created and stored and the projects are completely closed in the system., • Visit construction site for progress meetings with the customer and suppliers if required. Salary range: $100,000.00 - $110,000.00 annually Qualifications • Min. Bachelor's degree in engineering; mechanical, electrical, software, construction management, or similar technical field. Alternatively, at least 5 years of relevant industrial PM experience., • Project management experience with delivering projects, preferably in the mechatronic/industrial automation industry., • Strong technical background (electrical, mechanical-, marine engineer or similar), • Strong contractual and commercial knowledge and experience to manage projects as per project´s contractual agreement and commercial terms and conditions, • Process oriented and able to implement project management processes based on PMO standards., • Skilled project manager with cross-cultural understanding and good interpersonal, communication and collaboration skills., • Hands-on approach, with the ability to motivate others toward success., • Excellent report writing and presentation skills., • Essential skills include planning and budgeting, project administration, and decision-making / creative problem-solving skills., • Work closely with team members and decision makers to identify, recommend, develop, implement, and support cost-effective project delivery., • Able to interface with all members of the organization in a professional, calm, helpful and courteous manner – including Senior Executive Management, Project Management, engineering, supply chain and external stakeholders., • Strong, independent decision-making ability. Self-starter and possess a strong work ethic with a self-imposed desire to exceed everyday expectations., • Participate in required on-going technical training to be a systems subject matter expert., • Must be willing to travel and work as part of a global team of professionals as required (up to 25 % of the time)., • PMP Certification is required or must obtain PMI/PMP Certification within one year of hire.#CareerMadeDifferent Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state or federal laws.

Job Description Job Description Date 2026 Location 1200 Airport Road, North Brunswick NJ Title Senior Manager, R&D Department Research & Development Reports to VP, Research & Development FLSA (Exempt or Non-Exempt Exempt Role Overview The Senior Manager, R&D will lead multiple product development programs through the research, scale-up, and commercialization process while ensuring adherence to cGMPs, SOPs, FDA requirements, and customer expectations. This individual will provide technical and managerial leadership to the R&D team, oversee development priorities, manage complex projects, and partner closely with Production, Quality, Regulatory, Procurement, and Commercial teams. The Senior Manager, R&D will play a critical role in building and executing integrated development plans, improving department capabilities, mentoring team members, and supporting the company’s strategic growth and innovation initiatives. The duties and responsibilities described are not limited to those outlined and are not intended to be a comprehensive list of all activities, functions, or responsibilities required of the position. Additional duties and responsibilities may be assigned as required. This position requires travel for customer visits and trade shows, both within the United States and internationally, as needed to support business objectives. Areas of Responsibility Leadership & Strategy • Lead and manage the R&D function for new product development, reformulations, and line extensions., • Supervise, coach, and develop a team of formulation scientists, chemists, and R&D associates., • Establish department priorities, allocate resources, and ensure project timelines are achieved., • Collaborate with senior leadership to define product strategy, innovation pipeline, and technical direction., • Drive continuous improvement initiatives related to product development, manufacturing processes, and departmental efficiency., • Serve as the technical lead and subject matter expert for formulation and process development activities. Product Development & Commercialization • Oversee development and commercialization of nutraceutical products including capsules, tablets (monolayer, bilayer, trilayer), beadlets, powders, stick packs, and other specialty dosage forms., • Develop robust formulations and scalable manufacturing processes for dietary supplements and nutraceutical products., • Research and evaluate new ingredients, technologies, excipients, delivery systems, and product claims., • Lead feasibility assessments, prototype development, and technical evaluations for new business opportunities., • Design and direct laboratory experiments, pilot studies, and process optimization activities., • Recommend alternative ingredients and/or process improvements to enhance product quality, manufacturability, cost, and efficiency., • Scale up pre-exhibit and exhibit batches to commercial manufacturing and lead technology transfer from R&D to Production., • Coordinate manufacturing start-up activities and provide floor support during scale-up and initial production runs. Regulatory, Compliance & Documentation • Ensure all product development activities comply with applicable SOPs, FDA regulations, dietary supplement regulations, and Current Good Manufacturing Practices (cGMPs)., • Create, review, and approve SOPs, technical documents, formulas, specifications, validation protocols, and product development reports., • Review batch records, process characterization studies, validation reports, deviations, CAPAs, and investigation reports., • Prepare and review technical briefs, ingredient specifications, risk assessments, and customer-facing development summaries., • Support internal and external audits, customer visits, and regulatory inspections., • Maintain accurate and complete project documentation in accordance with company standards. Cross-Functional Collaboration • Partner closely with Production, Quality Assurance, Quality Control, Regulatory Affairs, Procurement, Supply Chain, Sales, and Marketing teams., • Present technical findings, risks, recommendations, and project status updates to cross-functional teams and leadership., • Identify and proactively communicate development risks, technical issues, and timeline impacts., • Work with vendors and suppliers to identify and qualify new raw materials and technologies., • Support business development and customer meetings by providing technical expertise and formulation recommendations. Additional Responsibilities • Monitor industry trends, emerging ingredients, formulation technologies, and competitive products., • Develop and manage project timelines, budgets, and department metrics., • Assist with annual planning, capital requests, and staffing needs for the R&D department., • Perform other duties and special projects as assigned. Other Responsibilities Including Safety: • Comply with all job-related safety and other training requirements. Requirements Education & Qualification: • Master’s degree in Pharmaceutical Sciences, Chemistry, Food Science, Chemical Engineering, or a related scientific discipline required., • OR a combination of education and experience equivalent to the above requirements., • 8–12+ years of progressive experience in product development, formulation, and commercialization within the nutraceutical, dietary supplement, pharmaceutical, or CDMO industry., • Minimum 3–5 years of leadership or people management experience., • Strong experience with tablets, capsules, powders, beadlets, and related dosage forms., • Proven experience in scaling products from laboratory through commercial manufacturing., • Experience working in a fast-paced contract manufacturing or CDMO environment strongly preferred. Certifications, Licenses, Credentials: • N/A Skills & Ability • Thorough understanding of cGMPs, FDA regulations, dietary supplement regulations, and product development processes., • Strong technical knowledge of formulation science, process development, scale-up, and manufacturing., • Excellent leadership, coaching, and project management skills., • Strong analytical and problem-solving abilities with the ability to interpret complex technical data., • Excellent written and verbal communication skills., • Ability to manage multiple projects simultaneously and meet aggressive timelines., • Strong organizational and cross-functional collaboration skills., • High level of ethics, integrity, professionalism, and confidentiality., • Proficient in Microsoft Office and ERP/document management systems.Able to maintain a professional and positive attitude., • Able to maintain confidentiality and possess a high level of ethics and integrity. Physical Requirements (lifting, etc.): • The employee is frequently required to sit (50%), stand, and walk (50%). Uses hands to finger, handle or feel writing tools and computer keyboard. May reach with hands and arms and infrequently may lift up to 30lbs. Use desk telephone/cell phone to talk and hear or converse with other employees. Work Environment (Office, Warehouse, temperature extremes, etc.): • Primarily located in an office environment where temperatures are controlled for heat and air conditioning. Occasionally walks through warehouse or manufacturing workplace and will be required to wear appropriate PPE for each work area including safety shoes, hair net, safety glasses, face mask, gloves, or disposable jumpsuit. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including medical, dental, vision, short- and long-term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation in the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation.

Job Description Date 12/2020 Location 1200 Airport Road, North Brunswick NJ Title Formulator, R&D 1 Department Research & Development Reports to Director, Research & Development FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The R&D Formulator will research, develop, and optimize product formulations for various brands and products. This position will support the R&D team by completing research projects including conducting formulation evaluation and analytical characterization of products. Areas of Responsibility • Work within R&D and Operations teams to troubleshoot technical, formulation, processing issues during product development and commercialization., • Work with Purchasing team and R&D Directors to generate new formulation, sourcing new/existing raw material for cost analysis and feasibility of formulation., • Maintain accurate project information, formulations, and specifications., • Collaborate with the QA department in development of proper documentation for new formula and product develop projects., • Hands-on experience or knowledge operating manufacturing process equipment such as Tablet Press, Encapsulator, Coating Pans, Granulator, Freeze Bed Dryer, etc., • Other duties as assigned Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • BS in Chemistry, Nutrition/Dietetics, Food Science, or related field required., • 1-3 years R&D related experience in the dietary supplement, nutritional, food &/or beverage, or pharmaceutical industry, • Familiarity with good manufacturing practices (GMP's)and Regulations for 21CFR Certifications, Licenses, Credentials: • N/A Skills & Ability • Bi-Lingual in either Chinese or Hindi is a plus., • Understanding of market dynamics and sound business judgment, • Strong project management and leadership skills, • Ability to negotiate and sustain networking relationships, • Comfortable with figures and in collecting, analyzing, and interpreting data, • Solid judgment with ability to make good decisions, • Ability to interact effectively with different departments and with all levels of management, • Must know MS Office, particularly Excel, • Knowledge of ERP systems (Syspro, SAP), • Develop and maintain long-term relationships with domestic and international vendors, • Understand elements of Marketing, Manufacturing and R&D and their respective strategies Physical Requirements (lifting, etc.): • The employee is frequently required to sit (50%), stand, and walk (50%) at a lab bench., • Uses hands to finger, handle or feel writing tools and computer keyboard, • Reaches with hands and arms and infrequently may lift up to 30lbs, • Uses desk telephone/cell phone to talk and hear or converses with other employees, • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • Occasionally walks through warehouse or manufacturing workplace and will be required to wear appropriate PPE for each work area

Job DescriptionObjective The Process Engineer will provide technical support for GMP drug product manufacturing operations. This role will provide technical support and conduct investigations into product/process quality events and customer complaints; identify, assess, and execute projects to optimize existing processes, raw materials, components, and packaging in manufacturing and final product packaging; work with multi-functional teams to execute and deliver assigned projects, including specification, conceptual development, protocol writing, selection, testing, and qualification. This is a hybrid role, based part-time in the office and part-time remote, with the office located in Somerset, NJ. Travel will be required to our Iowa facility. Ability to support travel 25%. Essential Functions • Identify opportunities to improve quality, efficiency, and customer service through changes to product components, component processing, and component inspection. Evaluate those opportunities and present projects to management for approval to implement changes., • Work with multi-functional teams to execute product and packaging projects to improve and optimize manufacturing and packaging processes. Support complex projects to meet established timelines without impacting manufacturing. Proactively adjust schedules to meet changing priorities., • Provide technical support for the transfer of new or improved manufacturing processes between functional groups or sites, ensuring knowledge capture and compliance with quality and regulatory standards., • Write and execute validation protocols either acting as the study director/validation engineer or working with the Validation department., • Lead and participate in investigations to drive technically and scientifically sound corrective and preventative actions. Apply creative problem-solving techniques using knowledge base and historical experience to address immediate, short-term, and future needs. Lead root-cause analysis investigations as a technical resource., • Investigate product complaints and write reports of investigations. Assist as required to support conclusion and possible corrective actions., • Provide support in the development, review, and maintenance of various radiopharmaceutical and cGMP documents, including Standard Operating Procedures (SOPs), Batch Records, Work Instructions and technical documents., • Assist in the development of training materials and conduct training sessions for target audience on document updates, providing clarity and guidance, ensuring full compliance., • Present data and information as a technical subject matter expert to regulatory agencies., • Actively promote safety. Always demonstrate good safety practices including the appropriate use of protective equipment. Report and take initiative to correct safety & environmental hazards, • Write and manage actions for change controls in Quality Management System (QMS) as applicable for tech transfers., • Stay up to date with industry regulations and guidelines (e.g., FDA, EMA) to ensure that all documentation meets regulatory requirements and contributes to regulatory submissions.Education/Experience, • Bachelor’s Degree in Engineering or related scientific discipline., • Minimum 2 years of experience in pharmaceutical or medical device manufacturing or other related regulated industry., • Expert knowledge of MS Office suite., • Previous experience working with radiopharmaceuticals and CMOs strongly preferred.Knowledge/Skill/Ability, • Must possess excellent written, verbal and presentation skills. Must be able to communicate effectively with all levels of management, both internal and external., • This individual should be a self-starter with the ability to work well both independently and in a team environment., • Demonstrated technical problem-solving skills with root cause analysis tools., • Direct experience with project management skills., • Excellent organizational and time management skills., • Establishes strong inter-departmental relationships and is viewed as a valuable technical resource to others., • Direct experience with technical transfer and aseptic/parenteral pharmaceutical process validation methodologies, • Familiar with Code of Federal Regulations (CFR) parts 210 and 211 and supporting regulatory inspections, • Experience in drafting and reviewing Chemistry, Manufacturing and Controls (CMC) regulatory filing sections, • Ability to support travel 25%.Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. During this job, the employee may encounter exposure to radiation hazards. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. For information on Perspective Therapeutics, visit our website at: www.perspectivetherapeutics.com. Perspective Therapeutics provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Powered by JazzHR tzuk0kNJ02

Job Description The Business Data Analyst facilitates business intelligence processes and procedures, development and implementation, provides query and reporting expertise, analyzes data, and assists in the presentation of insights to our key stakeholders. This position applies the strategies and implementation of data mining, analyzing, and reporting in order to facilitate the company’s ability to leverage its data in development of strategic planning and quality assurance. This is a temporary assignment expected to run through January 2027. Schedule: Monday - Friday 8:30PM - 4:30PM Essential Functions and Accountabilities: • Supports the design, development, and implementation of new reporting requirements. Gathers and translates business needs and requirements from non-technical end users and stakeholders into query development and design., • Fulfills ad-hoc reporting/data requests., • Performs data validation to ensure completeness and accuracy of queries and reports and reconciles discrepancies., • Assists in the evaluation and prioritization of reported issues and communicates status and resolution to relevant users., • Participates in the maintenance of existing queries and reports, re-writing and enhancing these queries as needed., • Assists in the building of data visualizations and dashboards in PowerBI to display defined KPI., • Participates in the presentation of complex concepts and results to end users and stakeholders, • Participates in the migration from Tableau to PowerBI Academic Training: • Bachelor’s degree in Computer Science, Information Services, or other technical or healthcare field – highly preferred, • Studies level: University Education (Bachelor’s Degree), • Studies area: Computer Science/Engineering or other related field Position Requirements/Experience: • Experience working in medical/healthcare industry - preferred, • Knowledge of data collection, storage, and maintenance concepts - required, • Knowledge in predictive modeling - a plus, • Database organization, design, and maintenance skills., • Ability to troubleshoot database programs Technical Skills: • Knowledge of SQL – required, • Knowledge of PowerBI - required, • Knowledge of Microsoft Office Suite: Word, Excel (Pivot Tables/Look-Ups), Access, and OneNote – required, • Knowledge of Alteryx and/or Tableau - preferred IVI-RMA offers a comprehensive benefits package to all employees who work a minimum of 30 hours per week. • Medical, Dental, Vision Insurance Options, • Retirement 401K Plan, • Paid Time Off & Paid Holidays, • Company Paid: Life Insurance & Long-Term Disability & AD&D, • Flexible Spending Accounts, • Employee Assistance Program, • Tuition Reimbursement About IVIRMA Global: IVIRMA is the largest group in the world devoted exclusively to human Assisted Reproduction Technology. Along with the great privilege of providing fertility care to our patients, IVIRMA embraces the great responsibility of advancing the field of human reproduction. IVIRMA Innovation, as one of the pillars of IVIRMA Global, is a renowned leader in fertility research and science. Check out our websites at: https://rmanetwork.com/ & https://www.ivirma.com/ EEO “IVIRMA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: IVIRMA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at IVIRMA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion and/or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. IVIRMA will not tolerate discrimination or harassment based on any of these characteristics. IVIRMA encourages applicants of all ages.”

Job DescriptionJob Title: Analytical Research and Development Chemist Job Description The Analytical Chemist will collaborate with a dedicated project team of chemists in the laboratory to analyze and develop HPLC and GC methods for assays, impurities, dissolution, residual solvents testing, and particle size distribution of active pharmaceutical ingredients, excipients, and finished dosage forms. Responsibilities • Perform method development, method validation, and stability testing, including report writing for various dosage forms such as tablets, hard gelatin capsules, oral/topical liquids, oral suspensions, powders for oral suspensions, and nasal products with minimal supervision., • Support the product development team in creating new products., • Identify and characterize unknown impurities in drug products and substances., • Independently conduct method development, validation, and stability testing for various dosage forms., • Conduct elemental impurity testing using ICP-MS/ICP-OES., • Troubleshoot analytical issues to achieve desired results., • Perform other duties as assigned.Essential Skills, • Bachelor's Degree in Chemistry, Biology, or a related field; a Master's Degree is a plus., • 3-10 years of experience working as an R&D Chemist in a pharmaceutical company., • Operational and technical expertise in developing tests such as HPLC, GC, dissolution, particle size distribution, etc., • Experience in pharmaceutical method development, validation, and stability testing., • Ability to write reports suitable for regulatory submission with minimal supervision.Additional Skills & Qualifications, • Capability in method development, validation, and transfer., • Experience with various dosage forms including tablets, hard gelatin capsules, oral/topical liquids, oral suspensions, powders for oral suspensions, and nasal products.Work Environment The role is based in Somerset, New Jersey, at one of the fifteen commercial manufacturing sites globally, which is the only commercial manufacturing facility in the United States for this company. The work is primarily conducted in a laboratory environment with exposure to chemicals, reagents, and solvents. The position may occasionally require lifting up to 20 pounds. Job Type & Location This is a Contract position based out of Somerset, NJ. Pay and Benefits The pay range for this position is $38.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Somerset,NJ. Application Deadline This position is anticipated to close on Jun 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job Description Location: Hillsborough, NJ Compensation: $70,000 – $90,000 annually, based on experience. Why Join TriCore? At TriCore, we help power innovation. We’re an engineering and automation firm supporting the food, beverage, dairy, and life sciences industries with cutting-edge automation and controls integration solutions. We’re looking for someone ready to grow. If you’ve spent a few years in inside sales and want the chance to learn from senior engineers and business development leaders, this is your opportunity. You’ll get hands-on mentorship, exposure to technical automation projects, and the tools to build a long-term career in a growing industry. What You’ll Do: You’ll join our sales team in an account management/inside sales role, working closely with senior team members to develop proposals, support client needs, and learn the technical side of automation solutions. No worries if you don’t know everything on day one — we’ll train you. Key Responsibilities: • Learn & Grow, • Receive mentorship through a strong onboarding program and colleagues on our sales team, • Build technical knowledge of automation systems and industrial environments., • Proposal Support, • Assist in creating proposals, pricing, and scopes of work for industrial automation projects., • Gather and organize technical details needed to prepare accurate project quotes., • Sales Collaboration, • Support senior sales calls and client presentations., • Learn how to translate client needs into tailored solutions., • Track opportunities and help manage communications using CRM tools., • Process Development, • Help improve proposal templates and streamline quoting processes., • Learn to coordinate across sales, engineering, and customer success teams. What We’re Looking For: This role is ideal for someone with 2–3 years of inside sales experience who’s eager to develop technical knowledge and grow into a more senior solutions or business development role. Qualifications: • Associate’s degree required; Bachelor’s preferred, • 2+ years of inside sales or sales support experience, • Interest in automation, industrial systems, or technology is a plus (we’ll teach you!), • CRM or proposal-writing experience is helpful but not required Skills That Set You Apart: • Strong organizational skills and attention to detail, • Great communicator — comfortable speaking with clients and team members, • Eager to learn technical concepts and apply them in real-world solutions, • Proficient with Microsoft Office (Word and Excel especially), • Self-starter who thrives in a team-oriented, fast-paced environment Benefits & Perks: • Hybrid schedule: 2–3 days per week in-office, • 401(k) with generous employer match, • Health, dental, and vision insurance with employer contributions, • Unlimited PTO + paid holidays, • Short- and long-term disability options, • Laptop and equipment provided, • Professional development and mentorship opportunities Alternate Job Titles: • Junior Solutions Architect, • Inside Sales Support Specialist, • Proposal Coordinator – Automation, • Technical Sales Development Representative Keywords for Visibility: Automation sales, industrial controls, inside sales engineer, client solutions, proposal development, CRM, control systems, technical account manager, automation projects, sales support, industrial sales, food and beverage automation, inside sales specialist, engineering support, PLC, HMI, SCADA proposals, project estimator, industrial systems, engineered solutions, automation careers. We are proud to be an equal opportunity employer. We provide equal employment opportunities to all employees and applicants for employment and prohibit discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionAbout GenScriptGenScript Biotech Corporation (Stock Code: 1548.HK) is a global biotechnology group. Founded in 2002, GenScript has an established global presence across North America, Europe, the Greater China, and Asia Pacific. GenScript's businesses encompass four major categories based on its leading gene synthesis technology, including operation as a Life Science CRO, enzyme and synthetic biology products, biologics development and manufacturing, and cell therapy.GenScript is committed to striving towards its vision of being the most reliable biotech company in the world to make humans and nature healthier through biotechnology. Job Title: AI Researcher (Agentic AI System Architecture) Location: Piscataway, NJ The estimated salary range for this role is $85,000 - $145,000 depending on experience. Responsibilities Core Research Directions, responsible for one or two of the following areas: Harness Architecture Design & Implementation • Research and design Agent execution framework, providing standardized runtime environment for intelligent agents, • Implement tool call orchestration mechanism, supporting unified abstraction for function calling, API integration, and external system interaction, • Build execution sandbox environment to ensure safety and controllability of Agent operations, • Design task decomposition and planning engine, supporting automatic breakdown of complex goals and execution path optimization, • Implement execution state tracking and anomaly recovery mechanisms to ensure reliability of long-running tasks Memory System Architecture Development • Design hierarchical memory architecture, covering storage and retrieval mechanisms for working memory, short-term memory, and long-term memory, • Research memory compression and summarization techniques, enabling efficient storage of massive interaction history while preserving key information, • Build context-aware memory system, supporting multi-dimensional memory association based on time, task, and user, • Develop memory retrieval augmentation mechanisms, achieving deep integration of RAG and Agent memory, • Explore memory forgetting and update strategies, balancing memory capacity with information timeliness Multi-Agent Collaboration Architecture • Research multi-Agent system architecture, design communication protocols and collaboration mechanisms between Agents, • Implement role specialization and task allocation algorithms, supporting orchestration of expert Agents, coordinator Agents, executor Agents, and other roles, • Build consensus achievement and conflict resolution mechanisms to handle decision disagreements among multiple Agents, • Design Agent social behavior norms, simulating communication, negotiation, and feedback patterns in human team collaboration, • Explore emergent behavior and collective intelligence, researching self-organization and adaptive capabilities in multi-Agent systems General Architecture Capabilities • Design Agent evaluation and benchmarking system, establishing quantitative capability metrics, • Build Agent behavior interpretability framework, supporting decision process tracing and attribution analysis, • Research Agent safety alignment mechanisms to prevent risks such as unauthorized operations, harmful outputs, and goal drift, • Track cutting-edge Agentic AI research and translate academic achievements into engineering practice Job Requirements Basic Qualifications • Master's degree or above in Computer Science, Artificial Intelligence, Cognitive Science, or related fields, • 3+ years of AI-related research or development experience, with hands-on experience in Agentic AI and LLM application architecture, • Publications in top-tier conferences (NeurIPS, ICML, ACL, EMNLP, etc.) are preferred Technical Skills Programming & Engineering • Proficient in Python, familiar with asynchronous programming, concurrency control, and performance optimization, • Familiar with mainstream LLM frameworks (LangChain, LlamaIndex, AutoGen, CrewAI, etc.), • Experience in large-scale distributed system design and implementation, • Familiar with containerization technologies such as Docker and Kubernetes AI Expertise • Deep understanding of Transformer architecture and large model principles, • Familiar with Prompt Engineering, Function Calling, Tool Use, and related technologies, • Experience in RAG system development, familiar with vector retrieval, text Embedding, re-ranking, and related techniques, • Understanding of reinforcement learning fundamentals; experience with RLHF, DPO, and related methods is a plus Architecture Design • Capable of system architecture design, able to independently complete technical solution design for complex modules, • Familiar with design patterns and software engineering best practices, • Good habits in technical documentation writing Research Capabilities • Ability to conduct independent technical research, responsible for the entire process from problem definition to solution implementation, • Strong literature reading and summarization skills, able to quickly absorb cutting-edge research achievements, • Capability in technology selection and evaluation, able to make reasonable decisions among multiple solutions Soft Skills • Strong passion for AI technology, keeping up with the latest developments in the Agentic AI field, • Excellent communication and collaboration skills, able to work efficiently with engineering teams, • Critical thinking ability, capable of objectively evaluating and iteratively optimizing technical solutions Preferred Qualifications • Contributions to Agent framework open-source projects (e.g., LangChain, AutoGen, LlamaIndex), • Production-level Agent system deployment experience with 10,000+ daily task processing, • Familiarity with cognitive science and human decision-making theory, able to apply them to Agent architecture design, • Research experience in Embodied AI or robotics, • Familiarity with Graph Neural Networks, Knowledge Graphs, and related project experience, • Entrepreneurial experience or experience building AI products from 0 to 1 #LI-EB1 #GS GenScript USA Inc/ProBio Inc. is a proud equal opportunity/affirmative action employer committed to attracting, retaining, and maximizing the performance of a diverse and inclusive workforce. It is the Company's policy to ensure equal employment opportunity without discrimination or harassment based on race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity or expression, age, disability, national origin, marital or domestic/civil partnership status, genetic information, citizenship status, uniformed service member or veteran status, or any other characteristic protected by law. GenScript USA Inc./ProBio Inc. maintains a drug-free workplace. Please note: Genscript USA Inc./ProBio Inc. will only contact candidates through verified application sources. GenScript/Probio does not request personal information from candidates through individual email or any other platform.

Job Description Are you driven to grow, lead, and make a meaningful impact? At Apex, we're building more than a consulting and engineering firm—we're creating a place where your career accelerates, your contributions matter, and your potential is fully realized. We believe your growth is our growth, which is why we invest in your development at every stage of your career. Here, you'll work on projects that shape communities, protect the environment, and create lasting impact, all while being empowered with the autonomy and flexibility to do your best work. Fueled by high quality delivery, exceptional client retention, and strategic acquisitions, Apex Companies continues to rank among the fastest-growing firms in the AEC industry, recently recognized by the Zweig Group for our industry-leading growth. Our success is grounded in strong leadership, a collaborative culture, and a shared commitment to delivering exceptional outcomes. As we continue to grow, we're focused on building a team of high-performing professionals who are ready to lead, collaborate, and push what's possible. At Apex, you don't just join a company, you help shape what comes next. Your Responsibilities as a Scientist 2 - Project Scientist: • Collect soil, water, air, and/or building material samples., • Gather, analyze, and interpret data., • Estimated balance of 80% field work/20% office work, • Draft technical reports., • Ensure safe performance of project work., • Actively develop your own career growth. What we're looking for: • BS in Geology, Hydrogeology, Environmental Science, or related field, • 2+ years of experience with environmental field sampling and data collection, • Experience with local NJDEP, NYDEC, and/or PADEP regulations., • Strong technical writing and communication skills, the ability to successfully multi-task, safety awareness, and a good record and understanding of safe work practices., • Demonstrated proficiency with field procedures., • Generate data of known quality and appropriate field notes., • Ability to be successfully trained on a wide variety of project types., • Implement and complete tasks in a timely manner and within budget communicated by manager., • 40-hour HAZWOPER certification preferred, • Light construction experience/hands-on skills a plus., • Experience with data management and report preparation., • Valid driver's license, good driving history and reliable transportation (driving personal vehicle) is required., • Strong communication skills., • Proficiency with Microsoft Office suite. Why you'll love working for us: • Company-subsidized medical and dental., • Company-paid life, short, and long-term disability., • 401k match, tuition assistance, and more., • Cross-training and the ability to work on a variety of projects., • Performance-based bonuses or other incentives., • Working with the best and brightest in the industry., • 2,000+ employee national firm with 70+ locations across the US.Apex Job Title: Scientist 2 - Project Scientist Req ID: 11697 Annual Expected Pay Range$65,000—$75,000 USD We believe in equality for all and celebrate the diversity and differences of our employees, customers, and communities. We do not discriminate based on gender, race or color, ethnicity or national origin, age, disability, religion, sexual orientation, gender identity or expression, veteran status, or any other applicable characteristics protected by law. Apex aims to make apexcos.com accessible to all users. If you have a disability or special need that requires accommodation to navigate our website or complete the application process, please contact Talent@apexcos.com or (301) 417-0200. Likewise, feel free to reach out to us if you would like to view or discuss Apex policy related to equal employment opportunity or have any related concerns. EO/AA/VEV/Disabled Employer TO ALL RECRUITMENT AGENCIES: Apex Companies does not accept unsolicited agency resumes. Please do not forward resumes for any of our job postings to our career's sites, or to any employees of Apex Companies or affiliates. Apex Companies is not responsible for any fees related to unsolicited resumes.

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments., • · Ability to effectively communicate technical solutions to diverse audiences both orally and in writing. Work Schedule: Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Position Overview: The Nurse Practitioner will provide direct and indirect care to patients. Working under the direct supervision of the Medical Director/PCP, this role involves managing complex clinical situations, performing health assessments, and coordinating patient care. Responsibilities: Conduct health histories, physical exams, and patient teaching; order, interpret, and follow up on lab tests and results. Perform selected procedures and document care in the electronic medical record (EMR); initiate emergency measures as needed. Manage medication orders and diagnostic studies/treatments within attending physician-approved protocols. Assess, initiate, and coordinate patient care daily under the supervision of the attending physician. Refer patients to other physicians and specialists with staff PCP approval. Act as a liaison with healthcare professionals, providing education, communication, and support for staff, patients, and families. Participate in the provider call schedule and attend staff meetings. Assist the interdisciplinary team (IDT) in formulating a plan for the coordination of 24-hour care. Document patient changes in the medical record and communicate these changes to team members. Evaluate and treat patients in various settings, including homes, assisted living facilities, nursing homes, and hospitals. Precept medical students and residents during their clinic rotation. Encourage patients to have Advanced Directives and provide education as needed; discuss Do Not Resuscitate (DNR) options and complete necessary documentation in collaboration with a physician. Other duties as assigned Qualifications: Master’s degree in clinical nursing from an accredited Nurse Practitioner program. 3-5 years of nursing experience, with Nurse Practitioner experience preferred. Ability to practice within the scope of authority and meet standardized competencies as established by the state and approved by CMS. Experience working with a frail or elderly population preferred; training provided if necessary. Reliable transportation, a valid driver's license, and state-required liability auto insurance. Medically cleared for communicable diseases and up-to-date immunizations before engaging in direct patient contact. Pass a comprehensive criminal background check, including federal and state Medicare/Medicaid exclusion lists, criminal history, education verification, license verification, reference check, and drug screen. Technical Skills: Proficient in EMR systems, Microsoft Office Suite (Word, Excel, PowerPoint, Outlook), and general office equipment. Strong computer literacy and ability to correspond effectively in writing. Setting: Outpatient Clinic working with the geriatric population. Hours: Monday - Friday and on call Benefits: Competitive salary Benefits package; Medical, Dental, Vision, Health Care Flexible Spending Account (FSA), Dependent Care Flexible Spending Account (FSA), Paid Time Off, Tuition Reimbursement, 401(k), and Employee assistance program, etc Opportunity to work with a dynamic and growing organization.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Modeling to join our team. The Energy Engineer (Energy Modeling) will perform whole-building energy simulations to support design decisions, code compliance, certification programs, and decarbonization planning. This role focuses on accurate, well-documented building energy models that translate design intent into actionable energy and cost insights. Responsibilities • Perform Whole-Building Energy Modeling: Develop baseline and proposed energy models in eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP for new construction, major renovation, and retrofit projects., • Drawing and Specification Review: Review architectural, mechanical, electrical, plumbing, and envelope documents to identify model inputs, including geometry, constructions, occupancy, lighting, plug loads, HVAC systems, and operating schedules., • Code Compliance and Certification Modeling: Produce ASHRAE 90.1 Appendix G performance-path models, IECC compliance models, and certification submissions for LEED EAp2/EAc1, ENERGY STAR, Passive House, and similar programs., • Support Local Decarbonization Compliance: Develop models supporting compliance with local laws and stretch codes (e.g., NYC Local Law 97, Title 24, Boston BERDO, Washington Clean Buildings Act)., • Parametric and Design Optimization Studies: Run parametric analyses on envelope, HVAC systems, controls, and renewable energy options; quantify life-cycle cost and carbon impacts to support design decisions., • Calibrate Existing Building Models: Calibrate energy models against utility billing or interval data per ASHRAE Guideline 14 standards for retro-commissioning, deep retrofit, and ESPC projects., • Renewable Energy Modeling: Support photovoltaic, solar thermal, geothermal, and battery storage modeling using tools such as PVsyst, SAM, and integrated simulation tools., • Generate Technical Reports: Author energy modeling reports, narratives, and exhibits suitable for clients, design teams, certification reviewers, and authorities having jurisdiction. Requirements • Bachelor's in engineering (Mechanical, Architectural, Electrical, or Facilities) or Building Science, • 1-3 years of energy modeling experience, including at least one internship, co-op, or full-time role, • Hands-on experience with at least one of: eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP, • Working knowledge of ASHRAE 90.1 (especially Appendix G), ASHRAE 62.1, and applicable energy codes (IECC, Title 24, state stretch codes), • Understanding of HVAC system types, controls, building envelope, and renewable systems, • Familiarity with LEED energy modeling submission requirements preferred, • Strong Excel skills; experience with Python, Ruby, or scripting against modeling tools is a plus, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, BEMP, CEM, or LEED AP BD+C credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionScismic is supporting the growth of the most respected legacies in American industry, known for pioneering breakthroughs in optical technologies! With a proven history of industry firsts—including application-specific fibers, optical connectors, ribbon cables, erbium-doped fibers, Raman fiber lasers, and fiber gratings - Company is commited to delivering cutting-edge optical innovations and solutions by designing, manufacturing and supplying the high performance optical fibers, fiber cable and components and devices. Their mission is to advance communication technology while providing exceptional service that drives value for customers, employees, and shareholders. We seek a highly motivated and skilled Preform Assembly R&D Engineer to support the company’s optical fiber program in Somerset, NJ. Core focus includes - Stack and assemble glass preforms, operate latches, and maintain cleanliness in a cleanroom manufacturing process. The role offers the opportunity to advance optical fiber processing technology and have a significant impact on new product innovation. The ideal candidates will be responsible for equipment and process design and troubleshooting, and innovate in optical fiber fabrication techniques in collaboration with cross-functional teams at multiple locations. In this role, the candidates will support R&D programs to advance optical fiber science and technology for programs serving the medical, aerospace, and telecommunications industries. Essential Duties and Responsibilities include, but are not limited to: • Be a critical asset in leading an R&D program to advance optical fiber technology, including overseeing and contributing to development and innovation in optical fiber fabrication to improve performance, quality, reliability, and scalability., • Investigate the relationship between process parameters, fiber properties, and manufacturing outcomes, and guide technicians and engineers in conducting process trials and experiments to achieve project milestones., • Fabricate and characterize optical fibers to meet performance specifications and project requirements., • Conduct research, propose experiments, and analyze data to validate hypotheses and improve process understanding, particularly for troubleshooting fiber performance and quality as well as equipment and materials issues., • Manage, maintain, and upgrade mechanical and electronic facilities for optical fiber fabrication and testing, including automation, data logging, and fabrication records., • Collaborate with project teams to design and develop fabrication processes and facilities for fiber fabrication, particularly for novel fibers., • Stay informed of, and contribute to, advancements in fiber draw technology and integrate best practices in collaboration with global R&D, manufacturing, and engineering teams., • Communicate and document research findings through detailed technical reports and presentations., • Be a strong team player with openness and willingness to contribute toward group goals and achievements., • Perform other related duties as required to meet project and organizational needs.Key Qualifications:, • Key qualifications:, • Preform Assembly – 2+ years of experience in a materials, mechanical, or manufacturing role. Ability to perform precision assembly work in a cleanroom environment., • General requirement:, • Master’s (MSc) or Ph.D. in Physics, Mechanical or Chemical Engineering, Materials Science, or a similarly related field., • Proven expertise in developing and optimizing manufacturing processes, preferably in optical fiber or similar manufacturing., • Experience in designing, analyzing and reporting experiments for complex process systems.Knowledge and Experience Requirements:, • Proficiency in data analysis, experimental design, and process optimization methods., • Understanding of high-temperature processes related to glass properties and material flow is an advantage., • Experience with fiber characterization techniques, including optical and mechanical property measurements., • Analytical and problem-solving skills to address complex process challenges and defects., • Leadership skills to guide technical teams and mentor junior staff effectively., • Collaboration skills to work with cross-functional teams and global partners., • Excellent technical writing and presentation skills for communicating research findings and process updates., • Strong organizational skills to manage multiple projects and prioritize tasks effectively., • Adaptability to work independently while supporting team objectives in a dynamic environment., • Passion for innovation and a strong drive to advance fiber draw processes and technologies.General Expectations:, • Demonstrate effective communications (verbal, written) skillsProficient with MS Office Word and Excel, • Maintain discretion when working with confidential and proprietary information, • Strict adherence to Company safety policies and procedures, • Conform to all aspects of Company’ “Standards of Conduct” documentWorking at the company means having the opportunity to realize ideas, experience innovation and discover new solutions for the future. The company offers:, • Dynamic work environment, • Competitive salaries (100K - 140K Commensurate with experience), • Generous benefits programs, including medical, dental, tuition reimbursement, • Matching 401(k) planEmployees are expected to serve as role models for safe work practices and behaviors. This includes following established health and safety policies and procedures, maintaining a clean, organized work area, wearing, and properly storing all personal protective equipment (PPE), and actively engaging as a safety conscious worker with personal safety and wellness as a priority.

Job Description SOKOL GxP Services seeking a Technical Writer and Document Specialist to support CMC documentation for a late-stage clinical cell therapy program. This role will sit within the Cell Therapy Development Project and Portfolio Management Office and will support regulatory submission activities, dossier preparation, and cross-functional document coordination. The Technical Writer will author and co-author scientific content for CTD Quality sections aligned with regulatory strategy for clinical and life-cycle CMC submissions. This includes supporting Module 2.3 and Module 3 content, coordinating source documentation, managing submission timelines, reviewing and adjudicating comments, facilitating data verification, and helping ensure consistency and clarity across the dossier. This position requires close collaboration with Process Development, Analytical Development, Cell Therapy Technical Operations, Quality, Regulatory Sciences, CMC matrix team leaders, project management, document management, and external suppliers as needed. The ideal candidate will be detail-oriented, organized, deadline-driven, and comfortable working in a fast-paced regulatory submission environment. This is a 12-month hybrid contract position based in New Brunswick, NJ, with 50% onsite presence required and occasional travel to other local New Jersey sites for larger team meetings. Requirements Required Qualifications: • Bachelor’s degree required; Biology or related discipline preferred., • Minimum 2 years of experience in technical writing for Regulatory CMC documentation within the pharmaceutical or biotechnology industry., • Familiarity with eCTD structure for regulatory submissions., • Experience supporting CMC regulatory documentation, dossier creation, and submission timelines., • Cell therapy CMC experience required., • Familiarity with CTD Quality sections, including Module 2.3 and Module 3., • Understanding of source documentation requirements for regulatory submissions and how source documents connect to the authoring process., • Strong verbal and written communication skills., • Strong attention to detail, planning, organizational, and negotiating skills., • Demonstrated ability to deliver high-quality documentation within filing deadlines., • Proficiency with Microsoft Office applications, including Word, Excel, SharePoint, and PowerPoint., • Ability to work independently under supervision and collaborate cross-functionally with scientific, regulatory, project management, and document management teams., • Ability to work in a fast-paced, changing team environment and prioritize multiple tasks. Preferred Qualifications: • BLA regulatory submission experience strongly preferred., • Experience with computer-assisted document preparation tools preferred., • Proficiency in compliance-ready standards for final publication preferred., • Experience in biotech/pharma end-to-end product development preferred., • Experience training others on procedures, systems access, and document management best practices preferred. Benefits Competitive hourly rate, $: 33.03 – 41.95 (W-2, no C2C option) Working hours: Monday to Friday, regular business hours Hybrid position: 50% onsite required Location: New Brunswick, NJ 12-month contract with possibility of extension Occasional travel to other local New Jersey sites for larger team meetings, approximately 2–3 times per year Health insurance, holiday pay, 401(k), referral bonus program

Job Description Senior Health Economics Analyst Location: Remote Supervisor/Reporting to: Director, Performance Reliability Job Purpose: The Senior Health Economics Analyst is responsible for identifying and delivering data-driven insights and analytical support to senior leadership of IVIRMA North America. Success in the role will be achieved through the ability to leverage both qualitative and quantitative data to create business intelligence to guide strategic execution. This role serves to create and deliver reliable, insightful and actionable insight to improvements and opportunities for performance reliability – supporting our teammates in delivering a world-class patient experience. Essential Functions and Accountabilities: • Supports the design, development, and implementation of reporting to support data-driven decision making and insight. Partners with finance, commercial and business leaders to translate needs and requirements into dashboards and reporting with high utility., • Assists in the design and evaluation of organizational KPIs for potential replacement or evolution as the organization grows., • Prepares and analyzes medical cost and leading indicator data to develop presentations for executive and senior leadership. Interpret results and articulate actionable recommendations that maximize outcomes and ensures organizational targets are met., • Tracks performance of key performance indicators for outlined regions and teams as requested., • Supports finance, commercial and operations in the annual and multi-year planning processes including market durability, • Performs data validation to ensure completeness and accuracy of queries and reports and reconciles discrepancies., • Participates in the maintenance of existing queries and reports, re-writing and enhancing these queries as needed., • Participates in the presentation of complex concepts and results to end users and stakeholders Academic Training: • Bachelor’s degree in Computer Science, Information Services, or other technical or healthcare field – highly preferred, • Studies level: University Education (Bachelor’s Degree), • Studies area: Computer Science/Engineering or other related field Position Requirements/Experience: • Experience working in medical/healthcare industry - preferred, • Knowledge of data collection, storage, and maintenance concepts - required, • Knowledge in predictive modeling - a plus, • Database organization, design, and maintenance skills., • Ability to troubleshoot database programs Technical Skills: • Knowledge of PowerBI - required, • Knowledge of Microsoft Office Suite: Word, Excel (Pivot Tables/Look-Ups), Access, and OneNote – required, • Knowledge of Tableau - preferred IVI-RMA offers a comprehensive benefits package to all employees who work a minimum of 30 hours per week. • Medical, Dental, Vision Insurance Options, • Retirement 401K Plan, • Paid Time Off & Paid Holidays, • Company Paid: Life Insurance & Long-Term Disability & AD&D, • Flexible Spending Accounts, • Employee Assistance Program, • Tuition Reimbursement About IVIRMA Global: IVIRMA is the largest group in the world devoted exclusively to human Assisted Reproduction Technology. Along with the great privilege of providing fertility care to our patients, IVIRMA embraces the great responsibility of advancing the field of human reproduction. IVIRMA Innovation, as one of the pillars of IVIRMA Global, is a renowned leader in fertility research and science. Check out our websites at: https://rmanetwork.com/ & https://www.ivirma.com/ EEO “IVIRMA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: IVIRMA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at IVIRMA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion and/or belief, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. IVIRMA will not tolerate discrimination or harassment based on any of these characteristics. IVIRMA encourages applicants of all ages.”

Job Description We are currently seeking an Environmental Scientist, Geologist, or Environmental Engineer with 3-5 years of environmental consulting, environmental construction, or similar experience to support our growing Somerset, New Jersey office. The successful candidate will join a dynamic team performing environmental investigation/due diligence and remediation projects throughout New Jersey. This position requires a combination of field and office work, with field assignments varying based on project needs. The ideal candidate will have experience independently managing field investigations and environmental sampling activities, while also supporting technical reporting and data management tasks in the office. This role will support Phase I and II Environmental Site Assessments (ESAs), Preliminary Assessment, Site Investigation, Remedial Investigation, and Remedial Action phase activities at sites impacted by petroleum, solvents, metals, per- and per and polyfluoroalkyl substances (PFAS), and other regulated contaminants. Experience working under NJDEP regulations and guidance is strongly preferred. A successful candidate will be experienced with soil, groundwater, and vapor intrusion investigations, drilling and subcontractor oversight, environmental construction monitoring, reporting writing, and supporting project managers on various projects and technical documentation preparation. The candidate should be comfortable working both independently and collaboratively in an multidisciplinary consulting environment. Duties: • Lead, support, or perform field investigation and sampling activities including soil, groundwater, vapor intrusion, etc. under supervision of senior staff and Licensed Site Remediation Professionals (LSRPs)., • Collect, record, and organize field data to assist with preparation of environmental phase reports., • Coordinate and oversee subcontracted work, • Support project managers with data tabulation, management, and interpretation of laboratory data., • Prepare tables, figures, and technical documentation to support environmental phase reports for submission to NJDEP, • Support project managers with project execution, scheduling, and task coordination, • Occasional travel, overtime, and weekend work may be required depending on project schedules Requirements • 3-5 years of experience performing environmental investigations, remediation support, and field sampling activities, • Bachelor’s degree in Environmental Science, Geology, Environmental Engineering, or related field, • Experience with NJDEP regulatory programs, site remediation requirements, and environmental reporting preferred, • Microsoft Office Suite proficiency, • Experience preparing tables, figures, and assisting with technical reports, • Strong organizational, communication, and critical thinking skills, • Ability to lift and carry up to 50 pounds and work outdoors in varying weather conditions, • Possess and maintain a valid driver’s license, • 40-Hour OSHA HAZWOPER certification with up-to-date refresher Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. -Flexible Work Schedule -Health/Dental Insurance -401k Plan with Employer Match -Paid Parental Leave -Short & Long Term Disability -Profit Sharing -Paid Time Off -Leadership Development Program -Fitness Reimbursement -Tuition Reimbursement -Referral Bonus Program -Wellness Program -Team Building Events -Community Service Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job DescriptionAt ANS, we’re not just a consulting engineering firm—we’re a team of trailblazers shaping the future of multi-disciplinary engineering. Recognized as one of the Best Places to Work and Top 10 Hottest Engineering Firms in the US by Zweig Reports, and featured in Inc. 5000’s Top 250 for our staggering 1,748% growth, we’re proud of what we’ve built and where we’re headed. We’re allergic to bureaucracy, thrive on innovation, and embrace data-driven decisions. If you love collaboration, creativity, and a fast-paced environment, we might just be your perfect match! Our team includes professionals licensed in over 20 states, with more than 70 years of collective experience. We pride ourselves on fostering a collaborative and supportive work environment that encourages growth and professional development. At ANS, you’ll enjoy paid vacation, sick, and personal time off; support for continuing education and community involvement; and comprehensive healthcare, vision, and dental benefits for eligible employees. We are seeking a motivated and driven Senior Geotechnical Engineer to join our team in our NJ office. ANS is a rapidly growing, emerging civil engineering firm focusing on civil, geotechnical, structural, and electrical engineering for renewable energy and infrastructure projects across the US. “MUST-HAVE” PROFILE OF THE SUCCESSFUL CANDIDATE INCLUDE: • BS in Civil Engineering, Geology, or related degree, • Valid US Drivers License, and a reliable means of transportation, • Flexibility and willingness to travel, on occasion, and for multiple consecutive days periods of times (est. up to one week at a time, once per month), • Strong communication and organizational skills, ability to find solutions to problems, and get-it-done attitude!, • Proficiency with Microsoft Office products, • Minimum 8 years of experience in consulting engineering, or related field, • Experience in preparing Engineering Reports with strong technical writing skills, • Experience with working within and leading team environments, • Working knowledge of geotechnical principles and engineering design“NICE-TO-HAVE” SKILLS FOR THE SUCCESSFUL CANDIDATE MAY INCLUDE:, • Technical licensure track including EIT, GIT, PE, PG, PMP, or similar., • Experience in planning, implementing, overseeing, and managing subsurface investigation programs, • Prior experience with geotechnical investigations, including soil borings, rock coring, and material testing, • Experience with design of foundations, support of excavation systems, and preparing reports, • Prior experience with geotechnical software (gINT, GeoStudio, LPILE, ALLPILE, DeepEx, etc.), • Familiarity with renewable energy sectorTHE CHALLENGES THAT LIE AHEAD INCLUDE:, • Working alongside a team of high-performing engineering and technical professionals, • Performing geotechnical field investigations, construction observation, and engineering evaluation and technical analysis, • Preparing technical reports and summaries, and interfacing directly with coworkers, clients, and stakeholders to communicate findings and recommendations, • Completing technical analyses, including foundation design, support of excavation, and other engineering evaluations, • Actively participating in your career growth, including the opportunity to join elective continuing education courses, being involved in community and professional societies, and managing projects and experiences that stretch you outside of your comfort zone to grow you as a professional. ANS Offers the following benefits to full-time employees: 401(k) matchingDental insuranceHealth insuranceLife insuranceUnlimited Paid time offProfessional development assistanceVision insurance If you’re ready to work on impactful projects that shape the renewable energy future, ANS is the place for you. Your expertise will make a difference- help us deliver engineering solutions that matter. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Overview Under the direction of the County Engineer, the Senior Engineer is responsible for managing and overseeing complex transportation and infrastructure engineering projects, with a focus on roadway and intersection improvements, structures, buildings, bridges, traffic signal design, and advanced traffic management systems. This position provides technical leadership, project management, engineering design oversight, and staff supervision in support of County engineering operations and capital improvement initiatives. Responsibilities: Provide technical leadership and engineering guidance for highway, roadway, and intersection improvement projects. Manage engineering projects through planning, design, permitting, construction, and closeout phases. Review and resolve complex technical engineering issues and recommend practical solutions. Serve as a technical liaison to municipalities, state agencies, rail agencies, consultants, contractors, and utility companies. Perform independent technical reviews of engineering studies, plans, specifications, and reports. Prepare and review engineering specifications, scopes of work, cost estimates, and contract documents. Oversee and participate in the design, maintenance, and construction of: Highways, roads, streets, and intersections Bridges and culverts Storm drainage and flood control systems Traffic control devices and signal systems Interior and exterior lighting and electrical systems Public buildings and grounds Environmental remediation systems and related infrastructure Conduct field investigations and inspections of facilities, structures, construction projects, and public infrastructure. Evaluate existing infrastructure conditions and recommend repairs, upgrades, or operational improvements. Analyze traffic data and traffic operations to support transportation planning and safety initiatives. Coordinate maintenance and protection of traffic (MPT) plans, detours, and work zone traffic control. Assist with drainage and flood mitigation projects, including stormwater system planning and water flow analysis. Prepare clear, concise, and technically sound reports, presentations, correspondence, and recommendations. Supervise, mentor, and provide guidance to engineering and technical staff. Maintain project records, engineering documentation, and regulatory compliance files. Support a collaborative, team-oriented work environment focused on innovation and continuous improvement. Knowledge, Skills, and Abilities: Thorough knowledge of civil and transportation engineering principles, practices, and procedures. Knowledge of federal, state, and local regulations governing roadway design, traffic operations, traffic signals, and public infrastructure projects. Working knowledge of: NJDOT Roadway Design Manual MUTCD ADA/PROWAG requirements AASHTO standards NJAC regulations New Jersey Title 39 Familiarity with Complete Streets principles and Intelligent Transportation Systems (ITS). Knowledge of NJDOT PMRS and SAGE programs. Experience with transportation and traffic engineering software, including: Synchro SimTraffic HCS Centracs Experience with engineering design software such as AutoCAD is preferred. Strong technical writing, communication, and presentation skills. Proficiency in Microsoft Office Suite, including Word, Excel, and PowerPoint. Ability to manage multiple priorities and projects simultaneously. Ability to supervise, mentor, and evaluate engineering personnel. Strong analytical, organizational, and problem-solving abilities. Ability to establish and maintain effective working relationships with internal staff, public officials, consultants, contractors, and the public. Qualifications: Bachelor's degree in Civil Engineering or a closely related engineering discipline. Minimum of five (5) years of relevant NJ transportation experience, including: Traffic operations analysis and interpretation of traffic data Traffic signal systems and traffic control design Maintenance and protection of traffic (MPT) and detour planning Preparation of technical specifications and scopes of work for roadway, bridges and intersection improvement projects Professional Traffic Operations Engineer (PTOE) Certification preferred. Required Certifications and Licenses: Professional Engineer (P.E.) License in the State of New Jersey. Valid New Jersey Driver's License. The anticipated starting base pay for this position is: $75,000 - $120,000 per year, depending on experience and qualifications. Benefits: Build your future while helping shape the future of your community. At Middlesex County, we're committed to supporting our employees with competitive benefits and a workplace that values well-being and balance. Middlesex County is proud to provide the resources, support, and flexibility employees need to thrive both professionally and personally. Learn more about our benefits: Benefits Join Middlesex County Are you looking for a career that fits your interests and allows you to help your community? Middlesex County has opportunities for people with talent and drive! Our 2,000+ employees work together to provide the services and support that make Middlesex County one of the healthiest, safest, and sustainable places to live work and play. We're preparing for the future today with our Destination 2040 plan to help local businesses and residents grow and adapt to a continuously changing world. You can build your own future while helping to build the future of your community. With competitive benefits, including a pension plan, on-site wellness coaches, and health and dental insurance, Middlesex County offers the support employees need. The County also promotes a healthy work-life balance with generous vacation, sick, and holiday leave. Middlesex County is the most diverse county in New Jersey, and our employees reflect the dynamic energy of the County. We have locations throughout the County, from our downtown New Brunswick offices to our healthcare facilities to our parks system. No matter your interests and skills, there's a place for you in Middlesex County. Build your career and your community - apply for a position with Middlesex County today. Middlesex County is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, protected veteran status, disability status, or any other characteristic protected by law.

Position Details Position Information Recruitment/Posting Title Post Doctoral Associate - Rail Department Advanced Infrastructure Center Salary Details Minimum Salary $63,968 Offer Information The final salary offer may be determined by several factors, including, but not limited to, the candidate's qualifications, experience, and expertise, and availability of department or grant funds to support the position. We also take into consideration market benchmarks, if and when appropriate, and internal equity to ensure fair compensation relative to the university's broader compensation structure. We are committed to offering competitive and flexible compensation packages to attract and retain top talent. Benefits Rutgers provides a comprehensive benefits package to eligible employees. The specific benefits vary based on the position and may include: Medical, prescription drug, and dental coverage Paid vacation, holidays, and various leave programs Competitive retirement benefits, including defined contribution plans and voluntary tax-deferred savings options Employee and dependent educational benefits (when applicable) Life insurance coverage Employee discount programs Posting Summary Rutgers, the State University of New Jersey, with the Center for Advanced Infrastructure and Transportation (CAIT) is seeking a Postdoctoral Associate. This position reports to Professor Xiang Liu and will work independently with clearly defined research objectives associated with projects. The qualified candidate will have the following responsibilities: Coordinates internal resources and third parties for the successful execution of projects Track project performance to analyze the successful completion of short- and long-term goals Meet budgetary objectives and make adjustments to project constraints based on financial analysis Directly oversees work done by other team members and students Responsible for the interviewing and hiring of additional team members as needed Performs quality control and quality assurance on projects through expert knowledge of rail and transit engineering Writes technical reports and contributes to preparation of journal articles and prepares conference presentations Updates related research knowledge by participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations. Use and continually develop leadership skills The position also assumes collaboration with a group of researchers and graduate students from both academic and industrial partners. The candidate will be responsible for project reporting related to his/her research activities, supervision of graduate students, preparation of research proposals and publications, and presentations at professional and research conferences and meetings. The candidate is expected to have strong expertise in rail and transit transportation and engineering The candidate may be required to travel independently to various locations in the U.S. and work offsite without any manager supervision. In addition, the employee will demonstrate a leadership role in forming and maintaining productive working relationships, and the ability to work autonomously in the prescribed duties, as well cooperatively with CAIT's faculty and staff in general. Position Status Full Time Posting Number 26FA0069 Posting Open Date Posting Close Date Qualifications Minimum Education and Experience Requires a Ph.D. degree in civil engineering or related field from an ABET accredited university, or an equivalent combination of education and/or experience that demonstrates comprehensive knowledge and understanding of general research principles and practices. Certifications/Licenses Required Knowledge, Skills, and Abilities Must have excellent communication, presentation skills, and strong proficiency in MS-office applications required. Requires knowledge of Microsoft office and other computer related skills. Command of the English language must be at a skill level necessary to produce materials for mass distribution to market workshops and special events, as well as occasionally prepare articles for electronic newsletter. Extremely proficient in writing, editing and overall communications skills required. The individual will be expected to hold very high standards in how information is developed and presented. Must have strong skills in planning, and organizing, information integration, decision-making, and attaining results. The ability to design, develop, conduct, and manage transportation research, formulate problems and deliver reports on a constant and timely basis are critical. Extremely proficient in writing, editing and overall communications skills required. The individual will be expected to hold very high standards in how information is developed and presented. Ability to lead, document, and organize multiple simultaneous projects is key. Must be able to think broadly and conceptually and formulate creative, sophisticated solutions to complex problems, prioritize workload, and work independently with general supervision. Must be detail oriented, follow up, and keep task originators informed on task progress throughout process until completion. Must continuously notify director of progress and workload to ensure that deliverables are on schedule. Preferred Qualifications Knowledge and experience with the following are strongly preferred: Scientific analytical techniques and their application Experience in implementation of quality assurance/quality control research operations and reporting Conceptual modeling and creation of innovation ideas Familiarity with data analytics, computer vision and machine learning algorithms. Information dissemination and decision-support services Policy related analysis and investigation Previous interactions with transportation funding agencies and consultants Equipment Utilized Physical Demands and Work Environment Overview Statement Posting Details Special Instructions to Applicants Quick Link to Posting https://jobs.rutgers.edu/postings/268056 Campus Rutgers University-New Brunswick Home Location Campus Busch (RU-New Brunswick) City Piscataway State NJ Location Details Pre-employment Screenings All offers of employment are contingent upon successful completion of all pre-employment screenings. Immunization Requirements Under Policy 100.3.1 Immunization Policy for Covered Individuals, if employment will commence during Flu Season, Rutgers University may require certain prospective employees to provide proof that they are vaccinated against Seasonal Influenza for the current Flu Season, unless the University has granted the individual a medical or religious exemption. Additional infection control and safety policies may apply. Prospective employees should speak with their hiring manager to determine which policies apply to the role or position for which they are applying. Failure to provide proof of vaccination for any required vaccines or obtain a medical or religious exemption from the University will result in rescission of a candidate's offer of employment or disciplinary action up to and including termination. Equal Employment Opportunity Statement It is university policy to provide equal employment opportunity to all its employees and applicants for employment regardless of their race, creed, color, national origin, age, ancestry, nationality, marital or domestic partnership or civil union status, sex, pregnancy, gender identity or expression, disability status, liability for military service, protected veteran status, affectional or sexual orientation, atypical cellular or blood trait, genetic information (including the refusal to submit to genetic testing), or any other category protected by law. As an institution, we encourage all qualified applicants to apply. For additional information please see the Non-Discrimination Statement at the following web address: http://uhr.rutgers.edu/non-discrimination-statement Posting Specific Questions Required fields are indicated with an asterisk (). Applicant Documents Required Documents Resume/CV Optional Documents Cover Letter/Letter of Application Curriculum Vitae * List of Professional References (contact Info)

The New Jersey State Office of InnovationThe New Jersey State Office of Innovation is looking for diverse and experienced team members to deploy world-class innovative and digital services that solve pressing public interest challenges for the people of New Jersey. Our work spans numerous issue and policy areas, and is focused on making an impact in the lives of the New Jerseyans that we serve. Our work has decreased the amount of time it takes to apply for Unemployment Insurance, made it easier to start, operate, and grow a business in the Garden State, and connected millions of New Jerseyans to government programs, services, and benefits. Our team members wear many hats, contributing to both the execution of core projects and the evolution of the Office of Innovation (OOI). We use data and modern research, design, and development methods to inform our decision making, and we collaborate with stakeholders within and outside of government to understand and solve challenges. To learn more about the New Jersey State Office of Innovation, read our and visit our page. The technology operations director role is central to managing the Office of Innovation's technology platforms and systems. This role will collaborate closely with Office of Innovation leadership and oversee a small team to design and implement comprehensive policies and processes. Additionally, this role will spearhead long-term technical operational projects, including improving security practices, optimizing the use of hardware and software, and engaging in strategic procurement decisions. We are seeking candidates with a minimum of 7 years of professional experience in technology operations and managing web applications and software-as-a-service platforms with a focus on security, including at least 2 years of professional experience leading cloud-based IT platform administration and at least 1 year of professional experience in people management. You should have demonstrable success solving complex and highly-ambiguous problems in bureaucratic settings, yet preserve an agile and adaptive approach to this role. You should be an accomplished manager comfortable working in a startup-like environment where you think independently and operate with a high degree of autonomy, skilled at driving projects forward while communicating and collaborating closely across your team and the broader organization. This role will report to the Chief of Staff, liaise closely with other operations departments, and collaborate with other directors and initiative leads to support team members across the office. Responsibilities may include: • Act as the primary administrator of Office of Innovation technology platforms and systems, including Google Workspace, GitHub, AWS, Slack, and more., • Act as a primary liaison of the Office of Innovation to the State’s Office of Information Technology, on matters related to staff training, security policy, cloud policy, and other technical policies., • Manage software licensing and access management for onboarding and offboarding members of the office, contractors, and partners. Create and manage user accounts, permissions, and access controls while optimizing configuration of software applications., • Manage hardware provisioning, including accurate inventory for computers, phones, and IT accessories., • Maintain systems inventory and technical documentation, generate reports on performance/usage, ensure cost efficiency, and serve as a consultory point of contact for application vendors., • Assess, evaluate, and help implement new digital tools for teams., • Provide consulting and advising for new software or platform procurement, in collaboration with the Office’s finance and procurement functions, to provide the technical perspective and expertise on procurement efforts. Help ensure timely acquisition, distribution, and replacement of assets., • Act as technology operations leader, including managing a team and coordinating with Office of Innovation leadership, other operational directors, and team leads., • Design and implement organizational policies and processes to create smoother, more manageable systems, and enhance security practices, hardware and software utilization, and more., • Provide counsel on technical matters in plain language to our project teams and stakeholders to determine viable tech solutions. Interact and facilitate conversations with a diverse range of individuals, including NJ residents, state partners, and government officials., • Serve as the organization's primary authority on cyber security practices and policies, including maintaining an up-to-date understanding on regulatory requirements and industry standards and research in the cybersecurity space to inform our team's practices., • Develop processes and controls, in consultation with Office of Innovation leadership, to ensure Office systems are secure and properly configured., • Perform routine audits to ensure the security and accuracy of all internal digital services, and maintain the quality and reporting of this information for the office., • Manage and apply compliance and regulatory frameworks to cloud architecture and application security in the Office of Innovation’s project work, in coordination with multiple technical stakeholders and domain experts such as Office of Innovation project teams, the State Office of Information Technology, NJ Cybersecurity and Communications Integration Cell, and other State agencies as needed., • Execute additional duties and responsibilities to advance the Office of Innovation’s mission and work., • A minimum of 7 years of professional experience in relevant technical roles and a commitment to technical excellence in yourself and your work., • At least 2 years of professional experience leading cloud-based IT platform administration., • At least 1 year of professional experience in people management., • Professional experience in managing and scaling a technology operations team and providing developer operations support, including: improving shared libraries/utilities and practices around authentication, logging, alerting, and monitoring, debugging and diagnosing issues in distributed systems, ensuring system uptime and performance, and monitoring and notifying appropriate officials in the case of security and data breaches., • Working knowledge of modern IT security best practices, including single sign-on and identity management, multi-factor authentication, least privilege access, and other zero-trust principles., • Ability to engage with technologies such as: modern JavaScript, React, CSS, HTML, JavaScript libraries and frameworks, linting, and best practices, Amazon Web Services (AWS), SQL and NoSQL document store persistence, and Git/GitHub version control., • Experience executing full lifecycle software development in production, including well-designed code, high quality automated tests, designing infrastructure, debugging issues and ensuring system uptime, and writing documentation., • Experience solving complex problems through the use of human-centered design, agile iterative development, and data-driven decision making., • Proven skill in tackling problems with curiosity, engaging in inquiry, and understanding user needs to develop optimal solutions., • Paramount attention to detail and ability to execute key tasks with zero room for error., • Dedicated to advancing the mission of the NJ Office of Innovation and public service, with a strong commitment to accessibility and fostering a more inclusive society.We welcome applicants from a broad range of backgrounds. If you believe that you could excel in this role, we encourage you to apply. If you have any questions, please contact _. Compensation: Annual salary of $135,000-$155,000 commensurate with experience. Benefits include medical, dental, vision, paid leave, and competitive retirement plan options, as well as other optional fringe benefits. The New Jersey Office of Innovation is proud to be an equal opportunity employerWe are deeply committed to the principles of equity, diversity, and inclusiveness and seek to create a pluralistic community for all. We strongly encourage people of color, members of racial and ethnic minority groups, women, LGBTQI+ people, those with disabilities, and Veterans to apply. We are committed to building a team that is reflective of New Jersey’s incredible diversity. We do not discriminate against any candidate because of color, race, age, religion, sex, gender identity or expression, sexual orientation, membership in an employee organization, pregnancy, marital status, status as a parent, ancestry, national origin, disability (physical or mental), family medical history or genetic information, political affiliation, military service, retaliation, or other non-merit based factors. EligibilityYou must be authorized to work in the United States. Candidates may be required to pass a background check and complete additional steps as part of the application and onboarding process. You will be considered an “at-will” employee, meaning both employer and employee have the right to terminate employment with or without cause or notice.

Job DescriptionCompany Description We’re a leading Investor Services group offering end-to-end services in administration, accounting, reporting, regulatory and compliance needs of the investment sector worldwide. We employ a global workforce of 5,800+ people across 25 jurisdictions and have assets under administration (AUA) exceeding US$750 billion. We work with 13 of the world’s top-15 private equity firms. Our services are underpinned by a Group-wide commitment to ESG and best-in-class technology including a global data platform and innovative proprietary tools supported by in-house experts. Above all, what makes us different is our people. Operating as trusted partners to our clients, we deliver intelligent solutions through a combination of technical expertise and strong relationships based on deep client understanding. We’re driven by our Group purpose, to power people and possibilities. Job Description You will work closely with leading private equity and hedge fund firms in the alternative asset industry, supporting them under the guidance of seasoned industry professionals. This role involves managing trade and position reconciliations, resolving discrepancies, preparing performance estimates, and overseeing fund accounting processes. Additionally, you will provide client onboarding support, manage team members, and act as an escalation point for complex issues. What you’ll do • You'll collaborate with the client lead to build and maintain strong relationships through direct communication with multiple clients., • You'll foster a collaborative team environment by mentoring junior staff and actively participating in training and development., • You'll oversee financial operations including budgeting, vendor payments, cash management, and maintaining accurate records., • You'll advise clients on accounting matters while managing fund administrator interactions and supporting audits, NAV reviews, and tax filings., • You'll continuously evaluate and improve internal processes to monitor engagement efficiency and contribute to strategic client growth initiatives. What we offer • IQ-EQ offers a comprehensive benefits package designed to support employees' well-being and work-life balance., • Employees receive generous paid time off, including 4 weeks of PTO that increases over time, sick time and paid holidays, and financial wellness is supported through a 401(k) plan with a company match (subject to eligibility)., • Health benefits include medical, dental, vision, mental health support and additional ancillary insurance plans., • Additional benefits include paid parental leave and a hybrid work schedule, promoting both personal and professional fulfillment., • The salary for this position will be dependent on experience and location ($80,000 - $110,000).Qualifications, • You hold a Bachelor’s degree in accounting, finance, economics, or a related field., • You bring 10+ years of experience in financial services, ideally with middle office exposure and hedge fund expertise., • You have strong knowledge of financial instruments across domestic and global markets, including equities, fixed income, derivatives, and FX., • You demonstrate exceptional analytical, accounting, and communication skills, with attention to detail and the ability to manage multiple priorities., • You are proficient in advanced Excel and portfolio accounting systems such as Enfusion or Geneva, and possess strong research and writing capabilities. Additional Information Our commitment to you and the environment Sustainability is integral to our strategy and operations. Our sustainability depends on us building and maintaining long-term relationships with all our stakeholders – including our employees, clients, and local communities – while also reducing our impact on our natural environment. There is always more we can, and should do, to improve – whether in relation to our people, our clients, our planet, or our governance. Our ongoing success as a business depends on our sustainability and agility in a changing and challenging global landscape. We’re committed to fostering an inclusive, equitable and diverse culture for our people, led by our Diversity, Equity, and Inclusion steering committee. Our learning and development programmes and systems (including PowerU and MyCampus) enable us to invest in growing our employees’ careers, while our hybrid working approach supports our employees in achieving balance and flexibility while remaining connected to their colleagues. We want to empower our 5,800+ employees - from 94 nationalities, across 25 countries - to each achieve their potential. Through IQ-EQ Launchpad we support women managers launching their first fund, in an environment where only 15% of all private equity and venture capital firms are gender balanced. We’re committed to growing relationships with our clients and supporting them in achieving their objectives. We understand that our clients’ sustainability and success leads to our sustainability and success. We’re emotionally invested in our clients right from the beginning. #LI-HYBRID

Job Description Company Introduction Tri-State Energy (TSE) is a 40-year client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long-term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for facility optimization and decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are searching for a dynamic Sales Support Representative professional to join our team in Woodbridge, N.J. This person provides essential administrative and operational support to the sales team by managing documentation, coordinating customer communications, and assisting with sales-related processes. This role plays a key part in keeping deals moving forward by ensuring information is complete, accurate, and properly tracked. The ideal candidate is highly organized, detail‑oriented, responsive, and comfortable interacting with customers and internal team members in a fast‑paced environment. Key Responsibilities Document Collection & Organization • Request and collect documentation from customers as needed, • Organize, label, and upload files into internal systems and CRM tools, • Ensure documents are complete, accurate, and properly categorized Application & Form Support • Complete and submit required applications and internal forms as part of the sales qualification process, • Proactively follow up with customers to obtain missing information, • Track submission status and ensure timely completion DocuSign & Document Execution • Prepare and send documents using the sales team’s DocuSign account, • Monitor document completion and follow up as needed Sales & Customer Coordination • Confirm and coordinate meetings on behalf of sales representatives, • Provide customers with updates upon request, • Edit or modify proposals as directed by the sales team (e.g., removing pricing when required) RFP & Opportunity Monitoring • Monitor public bid and RFP platforms to identify relevant opportunities, • Flag applicable opportunities and deadlines for sales team visibility Presentation & Writing Support • Assist with drafting, editing, and formatting professional PowerPoint presentations, • Support sales and leadership teams with written materials and presentation preparation Qualifications • 1–3 years of experience in Sales Support, Sales Administration, Administrative Support, or a related role, • Strong organizational skills and attention to detail, • Comfortable communicating with customers via email and phone, • Ability to manage multiple priorities and deadlines, • Proficiency in:, • Microsoft Office (Outlook, Word, Excel, PowerPoint), • DocuSign or similar e‑signature tools, • Experience working with CRM systems (HubSpot preferred), • Strong written and verbal communication skills Preferred Skills • Experience supporting a high‑volume or fast‑paced sales team, • Familiarity with proposal workflows, document management, and internal approval processes, • Ability to work independently while collaborating closely with sales leadership Physical Demands of the job • The employee may be required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds and/or sit for long periods of time., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Why work with us? • Medical, vision, dental insurance and much more, • Competitive compensation, • 401(k) with company match, • Company-provided life insurance, short- and long-term disability, • Health Savings Account (HSA), • Education reimbursement program with management approval, • Annual paid time off, • Observance of 8 days off for Holidays, • Opportunities for advancement and development Work Schedule Monday through Friday, 8:30 a.m. to 5:30 p.m. in office, though some work will occur outside of regular work hours. • Occasional weekends and/or on call requirement as needed., • Some travel on occasion may be required.

Job Description Company Introduction Tri-State Energy (TSE) is a 40-year client-focused energy solutions provider committed to delivering engineering-driven strategies that improve facility performance, reduce operational and maintenance costs, and provide long-term reliable solutions by seamlessly combining technical engineering with project implementation. We focus on providing energy engineering and MEP contracting support for facility optimization and decarbonization initiatives. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary We are searching for a dynamic Sales Coordinator to join our team in Woodbridge, N.J. This person provides essential administrative and operational support to the sales team by managing documentation, coordinating customer communications, and assisting with sales-related processes. This role plays a key part in keeping deals moving forward by ensuring information is complete, accurate, and properly tracked. The ideal candidate is highly organized, detail‑oriented, responsive, and comfortable interacting with customers and internal team members in a fast‑paced environment. Key Responsibilities Document Collection & Organization • Request and collect documentation from customers as needed, • Organize, label, and upload files into internal systems and CRM tools, • Ensure documents are complete, accurate, and properly categorized Application & Form Support • Complete and submit required applications and internal forms as part of the sales qualification process, • Proactively follow up with customers to obtain missing information, • Track submission status and ensure timely completion DocuSign & Document Execution • Prepare and send documents using the sales team’s DocuSign account, • Monitor document completion and follow up as needed Sales & Customer Coordination • Confirm and coordinate meetings on behalf of sales representatives, • Provide customers with updates upon request, • Edit or modify proposals as directed by the sales team (e.g., removing pricing when required) RFP & Opportunity Monitoring • Monitor public bid and RFP platforms to identify relevant opportunities, • Flag applicable opportunities and deadlines for sales team visibility Presentation & Writing Support • Assist with drafting, editing, and formatting professional PowerPoint presentations, • Support sales and leadership teams with written materials and presentation preparation Qualifications • 1–3 years of experience in Sales Support, Sales Administration, or Administrative Support, • Strong organizational skills and attention to detail, • Comfortable communicating with customers via email and phone, • Ability to manage multiple priorities and deadlines, • Proficiency in:, • Microsoft Office (Outlook, Word, Excel, PowerPoint), • DocuSign or similar e‑signature tools, • Experience working with CRM systems (HubSpot preferred), • Strong written and verbal communication skills Preferred Skills • Experience supporting a high‑volume or fast‑paced sales team, • Familiarity with proposal workflows, document management, and internal approval processes, • Ability to work independently while collaborating closely with sales leadership Physical Demands of the job • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee may be required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds and/or sit for long periods of time., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Why work with us? • Medical, vision, dental insurance and much more, • Competitive compensation, • 401(k) with company match, • Company-provided life insurance, short- and long-term disability, • Health Savings Account (HSA), • Education reimbursement program with management approval, • Annual paid time off, • Observance of 8 days off for Holidays, • Opportunities for advancement and development Work Schedule Monday through Friday, 8:30 a.m. to 5:30 p.m. in office, though some work will occur outside of regular work hours. • Occasional weekends and/or on call requirement as needed., • Some travel on occasion may be required.

Technical Proficiency: Proficiency in Warehouse Management System (WMS) and Microsoft Office. Ability to communicate proactively and effectively including comprehending and communicating detailed instructions, reading and writing, and having knowledge of commonly used concepts, practices, and proced

Assume full responsibility for overall project management, including technical aspects, financial oversight, schedule adherence, and client satisfaction. As a trusted professional services firm powered by deep technical abilities, we solve our clients' complex challenges in water, environment, energ

Insight Global is looking for a Project Manager to help support one of our large pharmaceutical clients, specifically to support their CAR-T Manufacturing organization.The goal of this candidate will be FMEA, risk and gap assessment for end to end processes related to manufacturing their final thera

Bachelor's degree or higher in English, Technical Communications, Professional Writing, or a related field or equivalent combination of education, related experience and/or military experience. Estimate, track, and prioritize assigned projects, coordinate writing assignments across shared workstream

Familiarity with architectural/engineer drawings, space planning conapts, furniture systems and ancillary products, and technical systems.

B&D Holdings is a privately held investment and development firm with offices in Warren, NJ.Built upon a dynamic vertically integrated platform, B&D Holdings uses its unique talents and resources to create innovative real estate investment strategies.Our real estate portfolio consists of ove

Solid grasp of engineering processes, manufacturing, and technical roadmaps.

The ideal candidate will be capable of driving complex cross-functional initiatives while understanding the technical architecture and security requirements that support them. Translate technical discussions into actionable plans and project outcomes. Experience managing highly technical projects in

You assemble and lead cross-functional project teams, keep scope, schedule, and budget on track, and partner with Product Management and Global Engineering to land technical wins. Partner with Product Management and Global Engineering on technical alignment and delivery. Solid understanding of engin

Functional Project Manager Payments will lead complex, business-side transformation initiatives for large global banks, focusing on payments and trade finance.This is a functional/delivery PM role (not pure IT PM), driving end to end project lifecycle, process improvement, and digital transformation