Trabajos union operator en Rahway, New JerseyCrear alertas

Job Description N2 Licensed Operator Union County, NJ The N2 Licensed Operator is responsible for the safe, efficient, and compliant operation of treatment systems. This position monitors treatment processes, performs routine maintenance, collects samples, maintains operational records, and ensures all systems operate within environmental and regulatory requirements. The operator works independently and as part of a team to optimize system performance, troubleshoot equipment issues, and support continuous improvement initiatives. N2 certification is required. Key Responsibilities • Operate and monitor treatment systems, including pumps, filters, tanks, chemical feed systems, and control equipment., • Perform routine inspections of treatment equipment, meters, gauges, valves, and instrumentation., • Collect water samples and conduct field testing to verify treatment effectiveness and regulatory compliance., • Monitor and adjust treatment processes, chemical dosing, flow rates, and system parameters as required., • Perform preventive and corrective maintenance on pumps, piping, valves, motors, and treatment equipment., • Troubleshoot operational issues and implement corrective actions to maintain system performance., • Maintain accurate operational logs, inspection reports, sampling records, and compliance documentation., • Coordinate laboratory sample submissions and maintain chain-of-custody documentation., • Ensure compliance with all environmental permits, discharge limits, company procedures, and regulatory requirements., • Manage chemical inventories, deliveries, storage, and safe handling procedures., • Participate in emergency response activities and on-call rotations as required., • Maintain a clean, safe, and organized work environment and comply with all health and safety policies. Qualifications • N2 Operator License (or equivalent provincial/state certification)., • High school diploma or equivalent; technical or environmental education preferred., • 2–5 years of experience operating treatment systems., • Knowledge of treatment processes, chemical handling, sampling techniques, and process control., • Strong mechanical aptitude and troubleshooting skills., • Proficiency with Microsoft Office and computerized monitoring/control systems., • Valid driver's license with a satisfactory driving record., • Ability to work independently, maintain detailed records, and communicate effectively with clients, regulators, and team members.

Job Description NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry’s largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): • Start up and shut down (normal and emergency) plant systems and components., • Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions., • Prepares equipment for maintenance work by isolating, clearing and locking out., • Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures., • Troubleshoots equipment to restore to normal operation., • Analyzes charts and logs to identify potential or actual problems., • Identifies system problems to stabilize plant to normal conditions., • Trains new operators in the area, reinforcing safety and environmental principles., • Performs loading and unloading of railcars, tank trucks and totes., • Perform laboratory analysis of products., • Clerical duties as required., • Shipping duties as required., • Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile., • Participate/Lead various site teams., • Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: • High School Diploma/GED equivalent, • Minimum of 2 years’ experience in an industrial or manufacturing environment, • Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications, • Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required, • Willing and able to lift up to 50 lbs, • Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces, • Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc., • Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms, • Willing and able to acquire a boiler’s license, • Current and valid driver’s license – willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification, • Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site., • Experience maintaining, repairing and troubleshooting industrial equipment/machinery The following skill sets are preferred by the site: • High Hazard/Chemical operations experience, • Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures’ Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations, • Experience operating fork trucks, • Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status.

Job Description Our client is a ommercial and industrial boiler contractor serving building owners, property managers, hospitals, universities, manufacturers, and process facilities across New Jersey and the greater New York metropolitan area. Our work spans new boiler and boiler room installations, code repairs and alterations to pressure-retaining equipment, burner and controls retrofits, preventive maintenance agreements, emergency service, and efficiency upgrade projects. We are seeking a General Manager to take full operational and financial ownership of the business. This is a true P&L role. You will run service, construction, and shop operations day to day, own the numbers that ownership sees every month, protect and advance our code certifications, and build a durable leadership culture in a trade where skilled labor is scarce and loyalty is earned rather than bought. The right person is equal parts operator, financial thinker, and people leader — comfortable in a boiler room at 2 a.m. and in front of a spreadsheet the next morning. This role exists to professionalize how the business runs without breaking what already works. You will inherit experienced field technicians and long-standing customer relationships. Your job is to raise margin, tighten execution, and modernize systems while keeping the crew intact and the phone answered. Core Responsibilities Profit & Loss Ownership You own the P&L outright — top line, gross margin, overhead, and net. You will be accountable for annual budgeting, monthly forecasting, and the variance conversations that follow when actuals miss plan. • Build and defend the annual operating budget across every revenue line: service labor, preventive maintenance agreements, projects and retrofits, parts and equipment sales, rental, and shop work., • Own gross margin by division and by job. Understand where margin is made and where it leaks — mispriced service calls, unbilled work, warranty rework, unmanaged overtime, change orders never captured., • Manage work-in-progress and percentage-of-completion reporting on project work, including over/under billings, cost-to-complete accuracy, and backlog quality., • Drive cash performance: billing velocity, DSO, retainage recovery, unbilled revenue, and vendor terms., • Approve pricing, quoting standards, labor rates, and markup structures; make the call on which work is worth chasing and which is not. Financial Reporting & Analysis Produce the monthly financial package that ownership relies on to make decisions. This is not accounting support work — you are expected to build the reporting, interpret it, and act on it. • Assemble and present a monthly package including P&L with budget variance, gross margin by revenue line, backlog and WIP schedules, cash flow and aging, and KPI dashboards with commentary on what moved and why., • Build the operating metrics that run the business: technician billable utilization and labor efficiency rates, revenue per technician, first-time fix rate, callback percentage, average service ticket, quote-to-close conversion, PM agreement renewal and attachment rates, and overtime as a percentage of field labor., • Prepare capital request business cases for fleet, tooling, shop capacity, and headcount, with payback and return expectations stated plainly., • Develop customer-facing financial proposals for capital projects — installed cost, projected fuel and efficiency savings, simple payback and lifecycle cost, and applicable utility incentive and rebate capture. Operations, Code Compliance & the R Stamp Program You are the executive owner of our quality and code program. You are not expected to personally perform inspections or weld, but you are expected to understand what our certifications require and to make sure the organization never puts them at risk. • Maintain the integrity of the company’s National Board R Certificate of Authorization: enforce the Quality Control Manual in daily practice, support the designated QC Manager, manage the relationship with our Authorized Inspection Agency, and lead preparation for triennial National Board review and renewal audits., • Ensure repairs and alterations to pressure-retaining items are performed and documented to NBIC (NB-23) requirements, including R-1 and R-2 form execution, proper nameplate and stamping practice, and complete traceability of materials and welder qualifications., • Govern the welding program: ASME Section IX WPS, PQR, and welder performance qualification currency; continuity logs; and NDE coordination with third-party testing partners., • Apply ASME Section I, Section IV, and Section VIII Division 1 requirements appropriately across power boilers, heating boilers, and pressure vessels., • Enforce ASME CSD-1 controls and safety device requirements and NFPA 85 combustion safety practice on automatically fired equipment., • Own field execution across service dispatch, project scheduling, manpower planning, procurement and equipment lead times, subcontractor management, fleet, and shop throughput., • Own safety outcomes and the metrics that follow the company into every bid: TRIR, DART, and Experience Modification Rate. Lockout/tagout, confined space entry for boiler and vessel work, hot work, and respiratory protection are non-negotiable disciplines. Team Leadership & Change Management The technical problems in this business are solvable. The people problems are the hard part, and they are the reason this role exists. We are looking for high emotional intelligence — someone who reads a room, hears what a technician is actually saying under a complaint, and can hold a hard line without humiliating anyone. • Lead a multi-disciplinary team spanning field service technicians, boilermakers and welders, project managers, estimators, dispatch, and administrative staff., • Introduce process, measurement, and accountability into an environment that has historically run on relationships and tribal knowledge — and do it in a sequence the team can absorb. Sequencing and communication matter more than the changes themselves., • Build the succession bench: recruit, develop, and retain technicians in a labor market where the experienced boiler mechanic pool is shrinking and every competitor is fishing in the same pond. Own the apprenticeship and mentoring pipeline., • Set clear performance expectations, run consistent one-on-ones and reviews, coach the willing, and move decisively on the unwilling., • Serve as the escalation point for customer conflict, jobsite disputes, and internal friction — de-escalating without conceding margin. Commercial Growth & Customer Retention • Grow recurring revenue through preventive maintenance agreements and full-coverage service contracts; improve renewal rates and expand scope within existing accounts., • Support estimating and bid strategy on larger installations and retrofits; sit at the table on the accounts that matter., • Position the company on efficiency-driven work — burner and controls upgrades, condensing economizers, boiler plant optimization, fuel conversions, and decarbonization retrofits — where regulatory pressure is generating demand., • Maintain relationships with OEMs, distributors, engineering firms, mechanical contractors, and property management groups. Requirements Required Qualifications • Ten or more years of progressive operations leadership in commercial or industrial boiler, mechanical HVAC, power generation, or process piping contracting, including at least five years with direct P&L accountability., • Demonstrated experience operating inside an R Stamp certified organization — you have lived under a Quality Control Manual, worked alongside an Authorized Inspector, and been through a National Board review., • Working command of ASME Boiler and Pressure Vessel Code and the National Board Inspection Code as they apply to repair, alteration, and new installation., • Track record of improving gross margin and operating income in a service-and-project business, with specific numbers you can speak to., • Proven ability to build financial reporting from operational data and present it credibly to an owner, board, or private equity sponsor., • Experience leading fifteen or more employees across field and office functions, including hiring, development, and performance management., • Fluency with service management and ERP platforms and the discipline to make a team actually use them., • Bachelor’s degree in engineering, construction management, business, or a related field — or an equivalent combination of trade credentials and operating experience., • Valid driver’s license and willingness to be present in the field and at customer sites throughout the NJ/NY territory. Preferred Qualifications • Direct experience managing or holding responsibility for an R Stamp quality program, including manual authorship or revision and audit preparation., • Additional ASME certifications in the organization’s scope, such as S, U, PP, or A stamps, and National Board VR experience., • Prior background as a boiler technician, boilermaker, welder, or field service engineer before moving into management., • Experience with combustion analysis, boiler efficiency testing, stack loss and thermal efficiency measurement, O2 trim, turndown optimization, and heat recovery., • Union contract administration experience in the NJ/NY market., • Formal change management, Lean, or continuous improvement training., • Experience integrating an acquired business or standing up new systems and processes post-acquisition. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Short Term & Long Term Disability, • Compensation: $100,000 - 150,000 base salary + bonues and car allowance

The Driver/ Operator is also responsible for leading crews to ensure completion of customer projects CDL, Operator, Driver, Tanker, Hazmat, Field Technician.

We are seeking a Crane Operator for a busy Roofing company. Valid crane operator certification (such as NCCCO or equivalent).

CDL A with hazardous material and tanker endorsements. Driver/Operators work with Field Technicians on clean ups, spills, COVID and Hazmat Decon work and other duties delegated by management that are within the scope of work.

Job Description Machine Operator Needed for Cable Manufacturing Company in Florham Park, NJ on All 3 Shifts! Pay: $25 - $27/hour Shifts: 1st. 6am-2pm ($25/hour ; Overtime: $37.50/hour 2nd. 2pm-10pm ($26/hour ; Overtime: $39/hour 3rd. 10pm-6am ($27/hour ; Overtime: $40.50/hour Location: Florham Park, NJ Job Description Operate and run cable manufacturing equipment. Monitor the running and quality of the cable output. Once fully trained, you will operate 1-2 cells independently. You will receive an order sheet that specifies the cable and material, set up everything, and input the order specifications into a computer. Basic editing of pre-written programs is required. Additionally, you will troubleshoot equipment during operations or breakdowns and constantly refill the material coating the cables. Responsibilities • Operate and monitor cable manufacturing equipment., • Ensure the quality of the cable output., • Operate 1-2 cells independently once fully trained., • Set up machines according to order specifications and input details into a computer., • Troubleshoot equipment during operations and breakdowns., • Refill the material coating the cables as needed.Job Type & Location This is a Contract to Hire position based out of Union, NJ. Pay and Benefits The pay range for this position is $25.00 - $26.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Union,NJ. Application Deadline This position is anticipated to close on Oct 9, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Driver/Operators work with Field Technicians on clean ups, spills, COVID and Hazmat Decon work. Class CDL B or higher with hazardous material and tanker endorsements.

Job Description We are seeking an experienced Superintendent to serve as the senior on-site manager of maintenance operations for a senior housing community. The Superintendent’s primary duty is managing the maintenance function, including staff leadership, work prioritization, vendor oversight, inspection readiness, preventive-maintenance planning, and operational risk management. The role also provides technical direction and may perform limited hands-on work when necessary to evaluate conditions, address emergencies, or support operations. MANAGEMENT AND SUPERVISORY RESPONSIBILITIES • Manage the property’s maintenance function and customarily and regularly direct the work of at least two full-time maintenance employees or their equivalent., • Establish daily and weekly priorities; assign and monitor work; allocate labor and vendor resources; inspect completed work; and hold staff and contractors accountable for safety, quality, timeliness, documentation, and resident service., • Schedule staff and on-call coverage; approve work assignments within delegated authority; monitor attendance and capacity; and adjust resources before service levels are affected., • Lead maintenance meetings and communicate staffing, safety, property-condition, inspection, vendor, budget, and operational risks to the Property Manager and Regional Manager., • Exercise independent judgment within established authority and elevate capital needs, material compliance concerns, and matters exceeding approved budgets or delegated authority., • Interview and help select candidates; train, coach, and evaluate employees; document performance and conduct concerns; recommend discipline, promotion, compensation, transfer, or termination; and provide recommendations that management gives particular weight. OPERATIONAL RESPONSIBILITIES • Develop and manage preventive-maintenance plans for boilers, heating and hot-water systems, pumps, HVAC equipment, generators, fire and life-safety systems, elevators, laundry equipment, lighting, common areas, and other building systems., • Oversee resident work orders, unit turns, building and grounds inspections, snow and ice response, inventory, tools, supplies, and contractor activity. Determine whether work should be assigned internally or referred to a licensed trade or approved vendor., • Review recurring failures and property conditions; develop durable corrective recommendations; prepare scopes of work; support vendor selection; and provide input on capital priorities and operating budgets., • Maintain accurate, inspection-ready work orders, preventive-maintenance logs, equipment and life-safety records, water-temperature logs, certifications, inspection reports, photographs, and corrective-action documentation., • Lead maintenance preparation for New Jersey DCA, Bureau of Housing Inspection, fire, municipal, insurance, and other authorized inspections; assign corrective work and verify timely completion., • Ensure compliance with Company policies, OSHA requirements, applicable codes, Fair Housing and accessibility requirements, resident-access and privacy procedures, environmental protocols, and emergency-response standards., • Respond to or direct the response to significant emergencies, including leaks, sewer backups, power loss, elevator events, fire alarms, heating failures, hot-water interruptions, severe weather, and other urgent building conditions., • Interact professionally and respectfully with senior residents, applicants, guests, vendors, and employees; refer accommodation, modification, assistance-animal, accessibility, or communication-assistance requests to the Property Manager. QUALIFICATIONS • High school diploma or GED and at least five years of progressively responsible multifamily or comparable building-maintenance experience, including substantial responsibility for managing staff, vendors, property-wide priorities, and inspection readiness., • Current New Jersey Black Seal low-pressure boiler operator license preferred., • Valid driver’s license and ability to travel between assigned properties and respond to emergency calls, as required for the position., • Demonstrated ability to manage employees, exercise independent judgment, diagnose complex maintenance issues, distinguish operating repairs from capital or licensed-trade work, and communicate material risks and recommendations to management., • Working knowledge of plumbing, HVAC, electrical work within authorized scope, carpentry, appliances, preventive maintenance, life-safety practices, housing inspections, and electronic work order and timekeeping systems. SCHEDULE AND ON-CALL RESPONSIBILITIES This salaried management position requires sufficient flexibility to fulfill the role’s responsibilities and participates in rotating on-call coverage that may include evenings, weekends, holidays, emergencies, severe weather, and snow or ice response. The Superintendent must maintain reliable communication during assigned coverage and direct or provide an appropriate response under established procedures. Starting salary will be based on relevant management experience, qualifications, licenses, certifications, skills, internal equity, market conditions, and business needs. Position includes a 2 Bedroom Rent Free Apartment PHYSICAL REQUIREMENTS The position requires movement through occupied buildings, vacant units, grounds, mechanical areas, and exterior locations; indoor and outdoor work; climbing stairs and ladders when safe and authorized; and occasional hands-on use of tools or equipment. The employee may be required to bend, kneel, crouch, reach, push, pull, and lift, carry, push, or pull up to 50 pounds, with team lifting or mechanical assistance when appropriate. Reasonable accommodations may be made for qualified individuals with disabilities. EQUAL EMPLOYMENT OPPORTUNITY Moderate Income Management Company is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, sex, pregnancy, national origin, age, disability, genetic information, veteran or military status, sexual orientation, gender identity or expression, marital status, civil union status, domestic partnership status, or any other status protected by applicable federal, state, or local law. The Company provides reasonable accommodations to qualified applicants and employees with disabilities consistent with applicable law. Applicants who need an accommodation during the application process may contact the Company through the designated hiring contact.