Verification engineer jobs in Plainfield, New JerseyCreate job alerts

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Audit to join our team. The Energy Engineer (Energy Audit) will lead the technical execution of ASHRAE Level I, II, and III energy audits across commercial, institutional, and multi-family buildings. This role focuses on identifying Energy Conservation Measures (ECMs), quantifying savings opportunities, and producing high-quality client deliverables that drive energy efficiency and decarbonization outcomes. Responsibilities • Perform ASHRAE Level I/II/III Energy Audits: Analyze utility bills (electric, gas, steam, water) and architectural, mechanical, electrical, and plumbing drawings to baseline building energy consumption., • Conduct Onsite Audits: Lead and support field investigations of building envelope, HVAC equipment, lighting, domestic hot water, plug loads, and building automation systems using hand tools, light meters, data loggers, and infrared cameras., • Identify Energy Conservation Measures (ECMs): Develop a comprehensive list of viable ECMs tailored to the facility, occupancy, and client goals, including operational, capital, and decarbonization measures (e.g., electrification, heat pumps)., • Perform Energy and Cost Analyses: Calculate energy and demand savings using engineering calculations, bin analysis, spreadsheet tools, and/or simplified energy models; develop installed cost estimates and financial metrics (simple payback, ROI, NPV, IRR)., • Generate Technical Reports: Author client-ready audit reports including executive summaries, ECM write-ups, savings tables, recommendations, and supporting appendices., • Support Utility Incentive and Decarbonization Programs: Prepare documentation supporting utility incentive applications (e.g., NYSERDA, ConEd, NJ Clean Energy) and local carbon legislation compliance (e.g., NYC Local Law 97, BERDO)., • Client and Project Coordination: Coordinate site visit logistics, communicate progress to project managers and clients, and respond to client questions during and after the audit. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Architectural, or Facilities), • 1-3 years of experience performing energy audits or energy engineering work, including at least one internship, co-op, or full-time role, • Working knowledge of HVAC systems, lighting systems, building envelope, controls, and renewable systems, • Familiarity with ASHRAE Procedures for Commercial Building Energy Audits, • Experience using audit tools (data loggers, light meters, IR cameras, combustion analyzers) preferred, • Proficient in Microsoft Office (especially Excel), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CEM, or CEA credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description We’re hiring a bilingual (English/Spanish) Plant Manager to lead and transform operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Plant Manager is responsible for manufacturing plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Plant Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • Display appropriate work ethics and follow work rules. MINIMUM REQUIREMENTS: • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ full-plant management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Bilingual in English/Spanish (both written and verbal) REQUIRED COMPETENCIES: • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues, • Ability to drive cultural change, address challenges, and implement best practices from prior successful experience. WHY JOIN US At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility, • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A Maintenance and Reliability Engineer, to serve as a key technical resource supporting clients in optimizing maintenance and reliability programs, driving performance improvements, and sustaining asset health. You will balance hands-on maintenance leadership with analytical reliability strategies that reduce downtime, extend asset life, and improve overall equipment effectiveness (OEE). This is an on-site position with occasional travel up to 25% of the time. You will report directly to our Maintenance and Reliability Service Leader. Responsibilities Essential Duties and Responsibilities • Adhere to stringent regulatory requirements, such as FDA regulations, ensuring all activities and equipment meet industry standards for quality and safety., • Lead and execute preventive and predictive maintenance activities on production, utility, and process equipment., • Conduct data-driven analyses of equipment reliability trends and develop improvement recommendations., • Implement and sustain CMMS processes including PM optimization, asset hierarchies, and work management best practices., • Support and facilitate root-cause analysis (RCA) and corrective action implementation., • Partner with cross-functional teams (engineering, operations, quality, EHS) to align M&R initiatives with business goals., • Support regulatory compliance (FDA, GMP) and ensure documentation meets company and industry standards., • Coordinate vendor and contractor support for maintenance and reliability improvement activities., • Contribute to MRO spare parts management, bill of materials accuracy, and lifecycle cost reduction., • Participate in continuous improvement and digital transformation initiatives leveraging data visualization, AI, or BI tools. Qualifications Required Knowledge, Skills and Abilities • 3 – 5 years of experience in maintenance and/or reliability engineering., • Experience with either SAP or Hexagon is preferred., • Demonstrated experience in preventive and predictive maintenance programs., • Working knowledge of reliability analysis methods and continuous improvement tools., • Proficiency with Computerized Maintenance Management Systems (CMMS)., • Understanding of mechanical, electrical, pneumatic, and hydraulic systems., • Experience with MRO and spare parts management and BOM development., • Knowledge of EHS and GMP regulations., • Familiarity with Business Intelligence tools (Spotfire, Power BI, Tableau) or AI technology., • Strong verbal, written, and presentation skills; proficiency in Microsoft Office platforms (Excel, Word, PowerPoint)., • Able to travel up to 25% of the time. Preferred: • Bachelor’s or Associate degree in a STEM field or trade certification in instrumentation, mechanical, electrical, or related engineering field., • Life Science experience., • Certified Reliability Leader (CRL) or Certified Maintenance & Reliability Professional (CMRP) certification. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Promote a culture of technical excellence, accountability, and continuous learning within the commissioning team. Education and Experience Requirements: • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills, • Ability to travel to project sites as needed Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement., • Competitive compensation and benefits, including paid time off, health insurance, tuition reimbursement, retirement, stock purchase plan, and MORE! We are Searching for— A CMMS Engineer, to support our clients with activities related to the use, operation, migration, or analysis of their Computerized Maintenance Management Systems (CMMS). This is a on-site position with occasional travel up to 25% of the time. You will report directly to our CMMS Service Lead. Responsibilities Essential Duties and Responsibilities— • Project/ Migration, • Perform field walkdowns to verify the accuracy of the equipment data., • Carry out all technical data reviews and data entries in the system., • Translate and cleanse raw data in preparation for Data Migration., • Assist in the preparation of client project status reports and immediately communicate project deviations or delays to the Project Manager., • Meet regularly with all stakeholders to discuss progress, communicate changes, and support the entire change effort., • Assist with other continuous improvement and optimization projects, as required., • BI/ Optimization, • Extract and analyze data using business intelligence tools to aid business decisions., • CMMS Support, • Provide support to end-users in navigating and utilizing the CMMS., • Input and maintain asset and equipment data in the CMMS., • Track client requests and assist with metric and key performance indicators (KPI) reporting., • Other duties as assigned. Qualifications Required Knowledge, Skills and Abilities: • Preferred: Associate degree in a STEM field, or trade certification in instrumentation, mechanical, electrical, or related engineering field., • 1 -3 years’ experience in CMMS-related work (front end). Life Science experience preferred but not required., • Experience with either SAP or Hexagon., • Proficient in MS Office platforms, particularly MS Excel. BI Tool knowledge a distinct advantage., • Familiarity with data management processes (paper-based / digital change control processes)., • Ability to perform field verification / data collection for assets to be added to / changed on the CMMS., • Ability to complete projects on time that meet our quality standards., • Ability to quickly understand new software platforms., • Ability to build data for CMMS systems to the highest level of quality (averaging zero errors consistently)., • Able to travel up to 25% of the time. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Measurement and Verification (M&V) to join our team. The Energy Engineer (Measurement and Verification, or M&V) will plan and execute M&V activities to quantify energy and demand savings for retrofit projects, utility incentive programs, and Energy Savings Performance Contracts (ESPCs). This role focuses on rigorous, defensible savings calculations in accordance with IPMVP and program-specific protocols. Responsibilities • Develop M&V Plans: Author project-specific M&V plans following IPMVP Options A, B, C, and D, tailored to project scope, savings magnitude, and program requirements., • Establish Baselines: Collect, clean, and analyze pre-retrofit utility bill data, sub-metered data, BAS trends, and operating schedules to develop defensible baseline models., • Specify and Oversee Metering: Identify required metering points, specify and source data loggers and meters, coordinate installation, and validate incoming data streams for quality., • Perform Post-Installation Verification: Conduct site visits and spot measurements to verify equipment installation, operating conditions, and as-found schedules; document any commissioning or operational issues affecting savings., • Calculate Verified Savings: Build regression models (whole-building, hour-of-week, change-point) and engineering calculations to quantify energy, demand, and cost savings, including weather normalization where applicable., • Author M&V Reports: Produce baseline reports, savings reports, and annual reconciliation reports for clients, utilities, and program administrators; clearly communicate methodology, assumptions, and uncertainty., • Support Utility Incentive and ESPC Programs: Prepare incentive application packages, respond to program reviewer comments, and support performance guarantees on ESPC projects., • Data Analysis and Tooling: Use Excel, Python, R, or other tools to process large utility and interval datasets; apply statistical techniques such as regression, residual analysis, and outlier detection. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Industrial, or Facilities) or related quantitative degree, • 1-3 years of experience in M&V, energy analytics, utility program implementation, or energy engineering, including at least one internship, co-op, or full-time role, • Working knowledge of IPMVP, ASHRAE Guideline 14, and FEMP M&V Guidelines, • Experience with regression analysis and weather normalization (e.g., NMECR, CalTRACK, ECAM, or equivalent methods), • Strong Excel skills required; experience with Python, R, or SQL preferred, • Understanding of HVAC, lighting, controls, and renewable systems, • Familiarity with utility tariffs, interval data formats (Green Button, ESPI), and BAS trend extraction, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CMVP, or CEM credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description We’re hiring a bilingual (English/Spanish) Operations Manager to lead and transform manufacturing operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all manufacturing site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Operations Manager is responsible for plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Operations Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • Display appropriate work ethics and follow work rules. MINIMUM REQUIREMENTS: • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ management experience in a manufacturing environment, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Bilingual in English/Spanish (both written and verbal) REQUIRED COMPETENCIES: • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues, • Ability to drive cultural change, address challenges, and implement best practices from prior successful experience. WHY JOIN US At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details Attalon is seeking a Principal Laser Systems Engineer to lead the development of advanced lasers for aerospace applications. This engineer will take a lead role in laser systems engineering and system integration and test, including serving as a chief engineer, directing a team of laser experts, supporting program development and capture and serving as a customer-facing expert. Responsibilities • Laser Systems Engineering: Define and ensure compliance with system requirements, playing a key role in the structured decomposition of system-level specifications into sub-system and component specifications. Lead laser architecture development collaboratively with laser team across engineering disciplines and in collaboration with program management. Lead team to ensure that design concepts comply with customer specifications and are technically feasible and implementable., • Technical Leadership: Lead a group of highly skilled optical engineers, coordinating engineering activities within the team and across engineering disciplines. Exhibit a deep understanding of laser physics and engineering, especially for high-power diode-pumped solid-state and fiber lasers. Exhibits strong degree of ingenuity, creativity, and resourcefulness to develop highly advanced technologies, processes, and concepts related to the design, test, and evaluation of high energy laser optical systems. Assist planning of R&D projects, troubleshooting critical processes, solving unusually complex problems, and providing technical expertise and guidance to the organization., • Business Development: Serve as a spokesperson on new business opportunities and specialized projects. Serves as customer interface in meetings and other industry events as required. Lead and write technical proposals for the development of new business and assist in evaluating technical requirements, identifying exceptions, and preparing cost estimates for customer quotes., • Management and personnel development: Serve as a manager and mentor of small team of talented laser engineers whose experiences range from senior chief engineers to new graduates. Minimum Qualifications • B.S. in engineering field and 10-12 years of relevant experience, • Strong demonstrated technical background in lasers and laser technology, especially in high power fiber and diode-pumped solid-state lasers. Expert in laser physics and design. Demonstrated successful development of new, practical, challenging laser designs., • Structured engineering background including familiarity and experience with systems engineering practices for the new product design and development lifecycle, including mission analysis, requirements definition and derivation, establishing error budgets / engineering constraint budgets, interface definition, and tracking compliance progress throughout the development lifecycle., • Familiarity and experience with integration and test of complex laser systems including integration planning and sequencing, diagnostics and troubleshooting, formal verification planning and test design, and development of formal verification and qualification procedures. Preferred Qualifications • M.S. or Ph.D. in optics, applied physics or electrical engineering preferred with 8-10 years of relevant experience. 7+ years managerial and leadership experience., • Familiarity with executing to Department of Defense Contracts as Prime contractor or major Subcontractor is a plus. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Senior Construction Inspector - Transportation & Infrastructure Location: Woodbridge, NJ Employment Type: Full-Time | On-Site Salary Range: $100,000 – $150,000 annually (based on experience) Industry: Construction Management | Transportation | Infrastructure | Bridge | Civil Engineering About Garg Consulting Services, Inc. Garg Consulting Services, Inc. (Garg) is a leading multidisciplinary engineering and construction management firm specializing in transportation infrastructure, rail, bridge, and civil construction projects throughout the Northeast. Position Overview Garg Consulting Services, Inc. is seeking an experienced Senior Construction Inspector to support transportation infrastructure construction projects throughout Northern and Central New Jersey. This role supports NJ DOT, NJTA, NJ Transit, and public-sector roadway, bridge, rail, and civil projects, ensuring compliance with approved plans, specifications, and safety standards. The Senior Construction Inspector performs advanced field inspections, coordinates daily with contractors, engineers, and client agencies, and oversees construction quality, documentation, and pay quantities. This full-time, on-site position may also provide technical leadership and mentoring to junior inspection staff. Key Responsibilities • Perform and oversee daily field inspections of roadway, bridge, rail, and transportation infrastructure projects., • Ensure construction activities comply with approved plans, specifications, and contract documents., • Serve as the senior field representative and liaison between contractors, engineers, and client agencies., • Document daily construction activities, quantities, labor, equipment, and progress using digital reporting tools., • Track and verify pay quantities and assist with review of progress payments and estimates., • Review material certifications, test results, and submittals prior to installation., • Inspect traffic control and erosion control measures for compliance with approved plans and regulations., • Identify non-conforming work and coordinate corrective actions., • Assist with change orders, field modifications, and as-built documentation., • Lead and mentor junior inspection staff as required., • Attend construction meetings and provide technical field input., • Support project closeout activities including final inspections and punch lists.Required Qualifications & Certifications, • Bachelor's degree in civil engineering, Construction Management, or related field OR equivalent experience., • Minimum five (5) years of experience as a Senior Construction Inspector or Resident Engineer., • New Jersey P.E. license or NICET Level IV Highway Construction Inspection certification., • ACI certification., • NJ SAT Asphalt Technician certification., • Rutgers Traffic Control Coordinator certification., • OSHA 30-Hour Construction Safety certification., • Ability to perform quantity calculations and interpret plans and specifications., • Proficiency with digital inspection tools and Microsoft Office., • Ability to work in varied weather and field conditions., • TWIC Card eligibility and background screening compliance.Preferred Qualifications & Experience, • Experience on NJ DOT, NJTA, NJ Transit, or public-sector transportation projects., • Rail, bridge, and complex transportation infrastructure experience., • Experience mentoring or overseeing junior inspectors., • Familiarity with Document Control and Project Management Programs such as SiteManager, FieldManager, Bluebeam or Procore., • Additional certifications such as CMIT, EIT, CCMCompensation & Benefits, • Competitive Salary: $100,000 – $150,000 annually, • Medical, Dental & Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off & Paid Holidays, • Performance-Based Bonuses, • Professional Development & Licensing Support, • Wellness perk; gym membership reimbursementEqual Opportunity Employer Garg Consulting Services, Inc. is an Equal Opportunity Employer. Employment decisions are based on merit, qualifications, and business needs and comply with all applicable laws. Final candidates are required to undergo a background check and a pre-employment drug screening. These screenings may include employment and education verification, reference checks, and a criminal history check as allowed by law. All screenings are conducted in accordance with federal, state, and local requirements, including the Fair Credit Reporting Act (FCRA). Employment offers are contingent upon the successful completion of all required checks.

Job Description We’re hiring a bilingual (English/Spanish) Manufacturing Site Manager to lead and transform operations at our Edison manufacturing plant. This hands-on leadership role is the primary point of contact for all site functions including operations, engineering, quality, production, finance, and administration. You’ll drive cultural change, solve complex challenges, and align performance with business goals. We need a proactive leader who thrives on the floor, rolls up their sleeves, and inspires teams through a period of significant transition. Ready to make an impact? Apply today! WHO WE ARE: Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customers’ products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along with the distribution process. JOB SUMMARY/ESSENTIAL JOB FUNCTIONS: The Manufacturing Site Manager is responsible for manufacturing plant operations and profitability at the gross margin level. Manage production operations according to defined yearly operation plan to ensure attainment of business objectives. Coordinate establishment of production goals and actively pursue efficiency improvement and cost reduction initiatives. Oversee and manage plant employees while ensuring a safe and clean environment. The Manufacturing Site Manager is the primary point of contact for all site operations and responsible for operations and production with indirect reporting of quality, finance, and administrative functions. This individual will act as the primary site leader, ensuring cross-functional collaboration and effective execution of business objectives. • Coordinate and lead site operations in alignment with Cryopak’s policies, production goals, and strategic objectives., • Provide leadership and oversight for operations, engineering, quality, production, finance, and administrative teams at the site level., • Direct manufacturing and maintenance operations which ensure the most effective return on assets., • Act as the primary liaison between site functions and corporate leadership to ensure alignment with strategic goals., • Manage department heads to ensure coordination of purchasing, production, and shipping; including processing schedules, production orders, inventory requirements, staffing requirements, and work procedures., • Facilitate cross-functional communication and collaboration to drive operational excellence and continuous improvement., • Identify plans and processes which minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital., • Oversee site-level financial performance, ensuring adherence to budget and supporting cost optimization initiatives., • Assure attainment of business objectives and production schedules while ensuring Cryopak product quality standards., • Ensure compliance with regulatory, safety, and quality standards across all site functions., • Prepare and maintain production reports and personnel records., • Coordinate and recommend procedures for facility and equipment maintenance or modification, including the replacement and installation of new machines., • Manage spending against budget and in relation to changes in production volume., • Improve manpower and resource utilization within existing departments and processes., • Hire, train, evaluate, and discharge staff, and resolve personnel grievances., • Coordinate and direct establishment of plant policies and procedures., • Maintain a clean and safe manufacturing environment., • Ensure final product quality meets Cryopak standards and requirements., • Perform assignments in accordance with established safety policies and procedures., • Display appropriate work ethics and follow work rules. MINIMUM REQUIREMENTS: • BS Mechanical or Industrial Engineer related or 10 years production environment, • Minimum of 5 years’ manufacturing plant operations management experience, • Must be knowledgeable about occupational hazards and safety regulations., • Background with manufacturing methods, process improvement programs and procedures., • Bilingual in English/Spanish (both written and verbal) REQUIRED COMPETENCIES: • Demonstrated experience providing leadership and oversight across multiple functional areas (Operations, Engineering, Quality, Production, Finance, and Administration) within a manufacturing environment., • Must be knowledgeable of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods., • Must be knowledgeable of machines and tools, including their designs, uses, repair and maintenance., • Must be knowledgeable of business and management principles involved in strategic planning, resource allocation, human resources, and leadership techniques., • Must be knowledgeable of design techniques, tools, and principles involved in production of technical plans, blueprints and models., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Must be able to work in a team., • Must become familiar with workplace safety requirements and procedures., • Must have good interpersonal skills., • Hands-on leadership style, must be active on the floor and able to troubleshoot and resolve operational issues, • Ability to drive cultural change, address challenges, and implement best practices from prior successful experience. WHY JOIN US At Cryopak, we strive to offer a competitive salary along with a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description We are seeking a Senior Engineer, Product Development to serve as a critical bridge between engineering innovation and released product. This is a full-time hands-on, execution-focused role for a senior engineer who knows how to turn promising prototypes and early designs into field-ready, scalable products. This role is not a pure design position-it is a productization role. You will bring structure, rigor, and predictability to development while remaining deeply involved in technical problem-solving and decision-making. You’ll lead execution across development programs, work cross-functionally to resolve ambiguity, and raise the bar for manufacturability, serviceability, and release readiness. Depending on experience and growth, this role may evolve into broader technical or people leadership over time. What You’ll Do Product Development & Productization • Drive the transition of life science instruments and robotic automation systems from prototype or early design into manufacturable, field-deployable products., • Lead productization efforts with strong emphasis on DFM, DFA, and DFS., • Ensure designs account for cost, reliability, quality, manufacturability, and serviceability from early development stages., • Own or lead engineering rigor activities including tolerance analysis, risk assessment, FMEA, design verification and validation, pilot readiness, and design transfer., • Partner with engineers, scientists, and technical stakeholders to convert concepts into scalable, supportable product designs. Project Execution & Cross-Functional Leadership • Directly manage execution of product development programs, actively driving milestones, decisions, risks, and dependencies., • Work closely with R&D, Operations, Quality, Supply Chain, and Service to ensure early and continuous cross-functional input., • Act as a central technical and execution voice—resolving ambiguity, driving decisions, and maintaining momentum., • Communicate status, risks, tradeoffs, and execution challenges clearly to senior leadership, including the CEO., • Help establish realistic plans while strengthening accountability and follow-through. PLM / Stage Gate Development • Help build and implement a more formal PLM / Stage Gate development process., • Define phase criteria, deliverables, reviews, and go/no-go decision points., • Improve documentation, design review cadence, configuration management, and ECO discipline., • Ensure the right stakeholders are involved at the right stages of development. Supplier & Manufacturing Readiness • Engage suppliers and manufacturing partners to assess feasibility and improve design-for-build., • Support creation of release packages including drawings, BOMs, work instructions, and test methods., • Contribute to pilot builds, issue resolution, and lessons learned prior to broader release. What You Bring Required Qualifications • B.S. or M.S. in Mechanical Engineering or a closely related discipline., • 7–12+ years of hands-on experience in product development, NPI, manufacturing engineering, or electromechanical productization., • Proven success taking products from prototype through release into production., • Strong experience with DFM/DFA/DFS and structured product development practices., • Ability to directly drive project execution across multiple teams and functions., • Experience with life science instrumentation, lab automation, robotics, or complex electromechanical systems., • Strong engineering judgment with the ability to identify risk early and push work to completion., • Excellent communication skills, especially explaining technical tradeoffs to cross-functional and executive stakeholders. Preferred Qualifications • Experience with robotic lab automation, motion control, or precision electromechanical systems., • Background in low-volume, high-mix instrumentation environments., • Familiarity with PLM or Stage Gate development models., • Experience working with suppliers, contract manufacturers, and design transfer., • Experience in a growth-stage or smaller company environment where process-building is part of the role. Additional Details • Competitive compensation that includes bonus eligibility., • Comprehensive benefits package, including voluntary medical, dental, vision insurance and 401(k) retirement plan., • This is an on-site position at our new headquarters in New Providence, NJ., • Occasional travel may be required.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Modeling to join our team. The Energy Engineer (Energy Modeling) will perform whole-building energy simulations to support design decisions, code compliance, certification programs, and decarbonization planning. This role focuses on accurate, well-documented building energy models that translate design intent into actionable energy and cost insights. Responsibilities • Perform Whole-Building Energy Modeling: Develop baseline and proposed energy models in eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP for new construction, major renovation, and retrofit projects., • Drawing and Specification Review: Review architectural, mechanical, electrical, plumbing, and envelope documents to identify model inputs, including geometry, constructions, occupancy, lighting, plug loads, HVAC systems, and operating schedules., • Code Compliance and Certification Modeling: Produce ASHRAE 90.1 Appendix G performance-path models, IECC compliance models, and certification submissions for LEED EAp2/EAc1, ENERGY STAR, Passive House, and similar programs., • Support Local Decarbonization Compliance: Develop models supporting compliance with local laws and stretch codes (e.g., NYC Local Law 97, Title 24, Boston BERDO, Washington Clean Buildings Act)., • Parametric and Design Optimization Studies: Run parametric analyses on envelope, HVAC systems, controls, and renewable energy options; quantify life-cycle cost and carbon impacts to support design decisions., • Calibrate Existing Building Models: Calibrate energy models against utility billing or interval data per ASHRAE Guideline 14 standards for retro-commissioning, deep retrofit, and ESPC projects., • Renewable Energy Modeling: Support photovoltaic, solar thermal, geothermal, and battery storage modeling using tools such as PVsyst, SAM, and integrated simulation tools., • Generate Technical Reports: Author energy modeling reports, narratives, and exhibits suitable for clients, design teams, certification reviewers, and authorities having jurisdiction. Requirements • Bachelor's in engineering (Mechanical, Architectural, Electrical, or Facilities) or Building Science, • 1-3 years of energy modeling experience, including at least one internship, co-op, or full-time role, • Hands-on experience with at least one of: eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP, • Working knowledge of ASHRAE 90.1 (especially Appendix G), ASHRAE 62.1, and applicable energy codes (IECC, Title 24, state stretch codes), • Understanding of HVAC system types, controls, building envelope, and renewable systems, • Familiarity with LEED energy modeling submission requirements preferred, • Strong Excel skills; experience with Python, Ruby, or scripting against modeling tools is a plus, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, BEMP, CEM, or LEED AP BD+C credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

A leading staffing company is seeking a Design Verification Engineer with over 10 years of experience in ASIC/IP/SoC verification. The role involves defining verification strategies for DDR interfaces and developing testbenches in SystemVerilog.

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. Generate, review, and refine questions and solutions based on real-world mechanical engineering scenarios. Apply advanced subject matter knowledge to evaluate and

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25/hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You do

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Bachelor's degree in Chemical Engineering, Process Engineering, or a related field. We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. Minimum of 5+ years of pro

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Effective communication skills to collaborate across departments including manufacturing operations and engineering teams. Our manufacturing client in Irvington, NJ is looking for a Manufacturing Engineer to support the rubber injection molding operations for medium voltage electrical products by op

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Customer Service Representative for Driving Academy.The Customer Service Representative for Driving Academy is the face of our organization.This role is responsible for representing the organization in a professional manner, building rapport by providing information, giving recommendations, and comm

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Dollar Express Customer Service Representative.As a Dollar Express Customer Service Representative you will be responsible for providing exceptional service to our customers.Key priorities include greeting customers, assisting them with selection of merchandise, completing transactions, and answerin

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Data Entry experience not required.Remote Work From Home Data Entry Clerk - Part Time Market Research Panelists Our company is seeking individual

Explore a world of opportunities with us.Look ahead with us and help shape innovative solutions to make our world more sustainable and life healthier, more vibrant and more comfortable.At Evonik, you have the chance to explore, thrive, and grow alongside 33,000 colleagues.Among attractive career pat

Ability to work well and consult with associates at all levels and contribute to a positive work environment.Ability to stand and walk for the majority of work shift, frequently bend, squat and twist, lift up to 50 lbs.Reasonable accommodations may be made to enable individuals with disabilities to

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Customer Service Representative.Family owned and operated for over 46 years, we are proud to service all of New York, New Jersey, and Delaware, as well as parts of Connecticut, Rhode Island, Pennsylvania, and Maryland.The Customer Service Representative is responsible for supporting the Company's sa

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Account Representative - Marc Hughes State Farm.Are you bilingual Spanish speaking, outgoing, and customer-focused? Do you enjoy working with the public? If you answered yes, working for Marc Hughes State Farm may be the career for you!.No insurance experience needed.Establish customer relationships

Work at Home Data Entry Clerk - Part Time (Side Gig).We are looking for people who are motivated to participate in paid research across the country and local areas.Join This Work from Home Spain Market Research Panel Today.You have two options when it comes to paid research: you can either take part

Medical Billing Customer Service Representative SPHS-Physician Revenue Cycle.The Medical Billing Customer Service Representative will:.Provide answers regarding general inquiries on patient bills.Handle patient payments over phone, guide patients with electronic payments through the electronic medic