Trabajos verification engineer en Rochester, New YorkCrear alertas

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Integration & Test Engineer Job Code: 26533 Job Location: Rochester, NY Job Description: * Support the set-up, configuration, and documentation of hardware and software systems under test, including loading software onto multiple devices * Support design, development, and implementation of cost-effective procedures for testing and troubleshooting of components, sub-assemblies, assemblies, and systems * Support development of test plans, test procedures, requirements traceability, test reports, test flow, and test case design and implementation * Document testing issues and failures and perform analysis of test results * Support formal systems acceptance testing activities * Present test strategies, plans, and results to internal and external customers * Support failure investigation activities and failure review board (FRB) meetings Qualifications: * Bachelor's degree in electrical engineering , Computer Science, Computer Engineering, Mechanical Engineering, Aerospace Engineering or another related field Preferred Skills: * Knowledge of communications systems, software languages, automated software test, networks, network security, power systems, antennas, RF, and/or mechanical design and analysis * Desired skills include requirements analysis and verification, software scripting and usage of automated testing frameworks and applications In compliance with pay transparency requirements, the salary range for this role in New York state is $58,000 - $108,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Scientist, Mission Payload Chief Systems Engineer (Optical Systems) Job Code: 34283 Job Location: On-site in Wilmington, MA or Rochester, NY or Fort Wayne, IN or Palm Bay, FL Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: L3Harris Technologies has an immediate opening for a Mission Payload Chief Systems Engineer in Wilmington, MA to support Space Superiority and Imaging Systems. The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel. L3Harris in Wilmington, MA specializes in space-based, visible and IR payload systems with integrated electromechanical devices used for micro radian level line of sight pointing and focus control. Our collaborate team is looking for Systems Engineers to help design, develop, integrate, test, and deliver space based remote sensing systems to our customers to support our nations most critical capabilities. Essential Functions: * Lead requirements traceability and development of test plans to verify requirements * Perform technical analysis, manage specifications, and generate design review and technical documents. * Execute design trades to support technical decisions * Lead design reviews (PDR, CDR, etc.) * Lead integration and test of electro-optical/infrared systems and related hardware/software * Lead product test and design verification, requirements sell-off, and end item data package generation efforts * Support/lead data analysis and modeling and simulation * Evaluate space vehicle and end customer needs to help define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces * Evaluate and mitigate risk within the program * Mentor a growing, talented team of Systems Engineers * Contribute to proposal activities * Program planning, guidance, and execution Qualifications: * Bachelor's Degree in engineering and a minimum of 12 years of prior relevant experience. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. * Active Secret security clearance * 5+ years of systems engineering technical leadership experience * 5+ years experience with space-based payload or vehicle systems * Professional experience performing technical analysis, managing specifications, and generating design review and technical documents * Professional experience leading product test and design verification, requirements sell-off, and end item data package generation efforts Preferred Additional Skills: * Experience designing, procuring, fabricating and/or testing laser subsystems or focal plane array subsystems * Experience with active and passive remote sensing (LIDAR/Laser/Focal Plane Subsystems) * Systems engineering experience in electro-optical hardware development * Experience leading large space programs across the full system lifecycle * Comfortable negotiating technical and non-technical scope with customers * Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline * Experience generating/managing requirements at various levels of the system and flowing down requirements to sub-systems/sub-components * Experience using DOORS and/or MBSE software such as CAMEO and MagicDraw * Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems. * Ability to manage multiple and competing priorities * Experience leading program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR) * Ability to collaborate across all levels of leadership * Excellent inter-personal and communication skills, ability to interact with a cross functional team, act as customer interface * Ability to architect an end-to-end space system with a full understanding of the product lifecycle * Experience with project management aspects of technology development programs * Experience with estimating and managing costs & creating and managing schedules In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $153,000.00 - $284,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 34250 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: This position will be responsible for providing Electrical Engineering systems support and development to customer-funded programs within our Exquisite Imaging Solutions business unit of L3Harris Corporation. Our Exquisite Imaging Solutions products serve a broad array of government, civil and commercial customers by enhancing information superiority, contributing to our national security and providing actionable data for the protection of property and human life. We specialize in high-reliability space-based imaging payloads and end-to-end systems that offer active and motion imaging and data processing, exploitation and dissemination. We also provide solutions that map and monitor the earth and stars for a variety of commercial and governmental users. Essential Functions: * Design electrical systems and subsystems from customers or internal specifications. * Create and maintain electrical circuit designs working with cross discipline teams. * Experience with deriving specifications. * Experience supporting electronics designs from concept through test and verification. * Experience with DOORs, SPICE, MathCAD, Matlab, Simulink, and MentorGraphics tools. * Strong technical skills with the ability to read specifications and requirements. * Strong communication skills and the ability to work in a team environment. * Strong ability to make technically sound architecture decisions to guide development. Qualifications: * Bachelor's Degree and a minimum of 6 years of prior relevant experience or Master's degree and 4 years of experience. In lieu of degree, 10 years in electrical engineering. * Experience with Analog, Power and/or Digital Design Skills, including worst-case analysis. * Experience with test and debugging skills. Preferred Additional Skills: * Hold Secret or Top Secret Clearance or the ability to obtain a security clearance * Participate and contribute in technical reviews. * Experience performing Worst Case analysis. * Experience leading teams and project designs. * Problem-solving skills with ability to proactively identify alternate solutions to overcome. difficult technical challenges. * Detail-oriented and capable of managing multiple priorities in a fast-paced environment. In compliance with pay transparency requirements, the salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, and Vermont is $110,500 - $205,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. LI-TP1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role As we continue to grow as QuidelOrtho, we are seeking a Senior Electrical Engineer. The Senior Electrical Engineer will lead and participate in development of simple to moderately-complex electrical subsystems, including robust design, analysis, and engineering testing. May direct others on subsystem team. This position is in Rochester, NY. The Responsibilities * Leads and participates in structured problem solving root cause investigation for complex electrical problems. * Drives product lifecycle support for electrical components and/or assemblies with high criticality and complexity. * Leads and participates in design reviews with cross-functional teams. * Collaborates with and recommends external partners and suppliers for early feasibility work, prototyping, and production part/assembly qualification. * Generates technical documentation, including Design Specifications, BOMs, Work Instructions, etc. * Perform other work-related duties as assigned. * Provide technical resources to manufacturing related fixtures located at external suppliers. The Individual Required: * Bachelor's degree in Electrical Engineering with 5-10 years of experience or Master's degree with 3+ years * Must have direct technical experience with implementation of digital and analog circuits, motor driver circuits, and servo controllers. * Must have technical background with hands-on experience in following areas: Root Cause Investigation, Requirements Management, Risk Management, Verification and Validation strategies, Engineering Change. * Proficient with electrical engineering tools, including schematic capture, PCB layout, and SPICE. * Must have strong customer focus to ensure that the experience delivered by the product is consistent with expectations. * Results Orientation: Must be capable of making commitments, setting priorities, and delivering results in time and on budget in a highly regulated environment. * Situational Adaptability: Sees ahead clearly; can anticipate future concerns. * Develops and maintains effective cross functional relationships and is capable of quickly earning trust and respect. * Strong overall written and verbal communication skills, including presentation capability. * Must have the ability to travel 10% both domestic and international. Preferred: * Experience with Altium. * Experience with EMC/EMI compliance. * Experience in FDA regulated environment. Key Working Relationships Internal Partners: Operations Leadership, R&D, Quality, Regulatory, Service, Marketing, Project Management. External Partners: Customers and Vendors Work Environment The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment and include handling of viral and bacterial hazards, potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues, and samples. Flexible work hours to meet project deadlines. Up to 75% of the time at desk, standing or sitting extended periods of time. The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $89,000.00 to $115,000.00 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Employment Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ______. #LI-SP1

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role At QuidelOrtho, we're advancing the power of diagnostics for a healthier future for all. Join our mission as our next Staff Systems Engineer for in vitro diagnostic instrument development who will provide technical leadership and contribution to product design for QuidelOrtho's instrument platforms. Our Staff System Engineers have extensive experience and expertise in the field of systems engineering. They possess in-depth knowledge of systems engineering principles, processes, tools, and are often involved in high-level planning, integration, and optimization of complex systems. This role requires advanced problem-solving skills, the ability to lead a smaller team on large-scale projects, and a commitment to ongoing professional development. Additional responsibilities may include management of large technical projects or processes that span outside the immediate job area. Work is performed with limited oversight. This position is onsite full-time in Rochester, NY. Note: This position is not currently eligible for visa sponsorship. The Responsibilities • Gather, analyze, and manage system requirements, ensuring alignment with regulatory standards and customer needs, • Conduct risk analysis and mitigation strategies, including Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA)., • Lead formal design reviews; provide system-level perspective and ensure compliance with design controls., • Drive instrument development by creating a plan of execution using knowledge and ability to derive unique solutions and approaches, which are cost effective and contribute to the success of the project., • Utilize modeling, simulation, and data analytics to assess system behavior and optimize design performance., • Diagnose and resolve system-level issues, ensuring timely delivery of solutions. Use system engineering tools to carry out Root Cause Investigations and determine corrective and preventative action plans., • Provide status updates as needed to senior leadership, highlighting progress, risks, and mitigation plans., • Responsible for making moderate to significant improvements of processes, systems or products to enhance performance of technical job area., • Apply Six Sigma methodologies to identify, analyze, and improve processes within the development and manufacturing of medical devices., • Develop and execute system level test plans and protocols to validate system performance, reliability growth, and safety., • Conduct statistical analysis to determine appropriate sample sizes for verification and validation activities, ensuring robust and reliable results., • Collaborate with key stakeholders and external design partners to deliver product features that improve our customer experience, product performance and safety., • Perform other work-related duties as assigned. The Individual Required: • Bachelor's Degree in System Engineering, Biomedical Engineering, or related engineering field with strong cross-discipline experience is required, master's degree preferred., • Minimum 8+ years relevant experience required with a track record of delivering products in the medical, automotive, and/or defense industries, preferably with relevant medical device design exposure., • Demonstrated experience using Six Sigma tools and techniques for process optimization and quality improvement, • Demonstrated experience in applying statistical techniques to real-world problems, particularly in the medical device industry., • Demonstrated experience in systems engineering tools and methodologies, as well as experience with software development, hardware design, reliability growth testing and systems integration., • Strong verbal and written communication skills, with the ability to convey complex technical information to diverse audiences., • Ability to work effectively in a collaborative, cross-functional team environment. Including the mentoring of more junior engineers., • Strong analytical and problem-solving skills, with a focus on delivering innovative solutions., • Must have strong customer focus to ensure that the experience delivered by the product is consistent with expectations., • Results orientation: Must be capable of making commitments, setting priorities, and delivering results in time and on budget in a highly regulated environment., • Situational Adaptability: Sees ahead clearly; can anticipate future concerns., • Develops and maintains effective cross functional relationships and is capable of quickly earning trust and respect., • Must have the ability to travel 10% both domestic and international. Preferred: • Familiarity with medical device regulations and standards (e.g., FDA, ISO 13485, etc.), • Demonstrated experience in successfully working with external development partners in delivering complex solutions., • Familiarity with Clinical Chemistry and/or Immunohematology in vitro diagnostic instruments. The Key Working Relationships Internal Partners: • Clinical chemistry and transfusion medicine personnel (current and potential customers), • Development partners The Work Environment The work environment characteristics are representative of an office setting, though occasional light lifting of files and related materials is required. 30% of time in meetings, working with team, or talking on the phone, 70% of the time at the desk on computer, doing analytical work. Intermittently time is spent in a manufacturing or laboratory environment and include potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues, and samples. Occasional travel, domestically and internationally. Flexible work hours to meet project deadlines Physical Demands No strenuous physical activity required. Occasional light lifting of materials may be needed. Substantial time will be spent in virtual or in-person meetings, engaging with customers, and working on scientific content and documentation. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $125,000 to $135,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___. #LI-TO1

QuidelOrtho unites the strengths of Quidel Corporation and Ortho Clinical Diagnostics, creating a world-leading in vitro diagnostics company with award-winning expertise in immunoassay and molecular testing, clinical chemistry and transfusion medicine. We are more than 6,000 strong and do business in over 130 countries, providing answers with fast, accurate and consistent testing where and when they are needed most - home to hospital, lab to clinic. Our culture puts our team members first and prioritizes actions that support happiness, inspiration and engagement. We strive to build meaningful connections with each other as we believe that employee happiness and business success are linked. Join us in our mission to transform the power of diagnostics into a healthier future for all. The Role As we thrive together QuidelOrtho is seeking a Verification and Validation Engineer II to help with formal verification and validation of complex medical devices under the regulations of the FDA. The individual will be part of an engineering team that is responsible for requirements-based test design and execution of test procedures in a BL2 lab environment. The team is highly collaborative and will require regular interactions in formal reviews, test planning activities, and working with software development to reproduce and verify system defects. This position is onsite full-time in Rochester, NY. The Responsibilities • Develop Requirements based manual test procedures using HP ALM Quality Center, • Execute test procedures both in a virtual and lab environment, • Compile and analyze test results, • Access requirements for testability and determine best test approach, • Document and manage system software defects, • Participate in regular scheduling and team meetings, • Document and manage Test plans, Tracing and Reports, • Perform other work-related duties as assigned. The Individual Required: • This position is not currently eligible for visa sponsorship., • B.S. Degree in Computer Science, Chemistry, Biochemistry, Biology, Engineering, or a related discipline, • 3-5 years' experience working within a FDA regulated environment supporting software development or quality control, • Agile methodology, Jira, HP ALM Quality Center, Virtual Box, VMware and Unix experience The Key Working Relationships Internal Partners: • Software Development partners The Work Environment The work environment characteristics are representative of a manufacturing, laboratory, or warehouse environment and include handling of viral and bacterial hazards, potentially hazardous chemicals, as well as infectious or potentially infectious bodily fluids, tissues, and samples. Duties will change between lab environment and office. Flexible work hours to meet project deadlines Physical Demands No strenuous physical activity, though occasional light lifting of files and related materials is required. Salary Transparency The salary range for this position takes into account a wide range of factors including education, experience, knowledge, skills, geography, and abilities of the candidate, in addition to internal equity and alignment with market data. At QuidelOrtho, it is not typical for an individual to be hired at or near the top range for their role and compensation decisions are dependent on the facts and circumstances of each case. The salary range for this position is $70,000 to $85,000 and is bonus eligible. QuidelOrtho offers a comprehensive benefits package including medical, dental, vision, life, and disability insurance, along with a 401(k) plan, employee assistance program, Employee Stock Purchase Plan, paid time off (including sick time), and paid Holidays. All benefits are non-contractual, and QuidelOrtho may amend, terminate, or enhance the benefits provided, as it deems appropriate. Equal Opportunity QuidelOrtho believes in Equal Opportunity for all and is committed to ensuring all individuals, including individuals with disabilities, have an opportunity to apply for those positions that they are interested in and qualify for without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. QuidelOrtho is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform the duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Scientist, Mission Payload Chief Systems Engineer (Optical Systems) Job Code: 34283 Job Location: On-site in Wilmington, MA or Rochester, NY or Fort Wayne, IN or Palm Bay, FL Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: L3Harris Technologies has an immediate opening for a Mission Payload Chief Systems Engineer in Wilmington, MA to support Space Superiority and Imaging Systems. The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel. L3Harris in Wilmington, MA specializes in space-based, visible and IR payload systems with integrated electromechanical devices used for micro radian level line of sight pointing and focus control. Our collaborate team is looking for Systems Engineers to help design, develop, integrate, test, and deliver space based remote sensing systems to our customers to support our nations most critical capabilities. Essential Functions: - Lead requirements traceability and development of test plans to verify requirements - Perform technical analysis, manage specifications, and generate design review and technical documents. - Execute design trades to support technical decisions - Lead design reviews (PDR, CDR, etc.) - Lead integration and test of electro-optical/infrared systems and related hardware/software - Lead product test and design verification, requirements sell-off, and end item data package generation efforts - Support/lead data analysis and modeling and simulation - Evaluate space vehicle and end customer needs to help define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces - Evaluate and mitigate risk within the program - Mentor a growing, talented team of Systems Engineers - Contribute to proposal activities - Program planning, guidance, and execution Qualifications: - Bachelor’s Degree in engineering and a minimum of 12 years of prior relevant experience. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience. - Active Secret security clearance - 5+ years of systems engineering technical leadership experience - 5+ years experience with space-based payload or vehicle systems - Professional experience performing technical analysis, managing specifications, and generating design review and technical documents - Professional experience leading product test and design verification, requirements sell-off, and end item data package generation efforts Preferred Additional Skills: - Experience designing, procuring, fabricating and/or testing laser subsystems or focal plane array subsystems - Experience with active and passive remote sensing (LIDAR/Laser/Focal Plane Subsystems) - Systems engineering experience in electro-optical hardware development - Experience leading large space programs across the full system lifecycle - Comfortable negotiating technical and non-technical scope with customers - Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline - Experience generating/managing requirements at various levels of the system and flowing down requirements to sub-systems/sub-components - Experience using DOORS and/or MBSE software such as CAMEO and MagicDraw - Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems. - Ability to manage multiple and competing priorities - Experience leading program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR) - Ability to collaborate across all levels of leadership - Excellent inter-personal and communication skills, ability to interact with a cross functional team, act as customer interface - Ability to architect an end-to-end space system with a full understanding of the product lifecycle - Experience with project management aspects of technology development programs - Experience with estimating and managing costs & creating and managing schedules In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $153,000.00 - $284,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer Job Code: 34250 Job Location: Rochester, NY Job Schedule: 9/80 Job Description: This position will be responsible for providing Electrical Engineering systems support and development to customer-funded programs within our Exquisite Imaging Solutions business unit of L3Harris Corporation. Our Exquisite Imaging Solutions products serve a broad array of government, civil and commercial customers by enhancing information superiority, contributing to our national security and providing actionable data for the protection of property and human life. We specialize in high-reliability space-based imaging payloads and end-to-end systems that offer active and motion imaging and data processing, exploitation and dissemination. We also provide solutions that map and monitor the earth and stars for a variety of commercial and governmental users. Essential Functions: • Design electrical systems and subsystems from customers or internal specifications., • Create and maintain electrical circuit designs working with cross discipline teams., • Experience with deriving specifications., • Experience supporting electronics designs from concept through test and verification., • Experience with DOORs, SPICE, MathCAD, Matlab, Simulink, and MentorGraphics tools., • Strong technical skills with the ability to read specifications and requirements., • Strong communication skills and the ability to work in a team environment., • Bachelor’s Degree and a minimum of 6 years of prior relevant experience or Master’s degree and 4 years of experience. In lieu of degree, 10 years in electrical engineering., • Experience with Analog, Power and/or Digital Design Skills, including worst-case analysis., • Hold Secret or Top Secret Clearance or the ability to obtain a security clearance, • Participate and contribute in technical reviews., • Experience performing Worst Case analysis., • Experience leading teams and project designs., • Problem-solving skills with ability to proactively identify alternate solutions to overcome. difficult technical challenges. LI-TP1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

As the global leader in high-speed connectivity, Ciena is committed to a people-first approach. Our teams enjoy a culture focused on prioritizing a flexible work environment that empowers individual growth, well-being, and belonging. We're a technology company that leads with our humanity-driving our business priorities alongside meaningful social, community, and societal impact. How You Will Contribute as a Senior Digital Verification Engineer: The Wavelogic family of products are widely used in Ciena's optical fiber transmission solutions, and are one of the main contributors to Ciena's success in the telecommunications industry. To further strengthen our team, we are looking for an enthusiastic digital verification engineer who will be involved in the verification of these products, working within a team of digital design engineers, verification engineers and architects. Your role as a senior digital verification engineer will be to propose and implement innovative verification strategies, in order to thoroughly simulate and validate functional blocks and subsystems for the Wavelogic family of products based out of Pittsford, New York office. * As a senior digital verification engineer, you are expected to read and understand the architecture and functional requirements specification document(s) and communicate and collaborate with systems engineers and architects * You are held responsible for the complete and thorough validation of one or more architectural functional blocks by using an appropriate combination of simulation, formal and coverage methods * You are expected the create the verification, functional coverage and formal verification test plans * You are accountable for the creation of testbench environment and/or components, agents, scoreboard, and all test scenarios related to your architectural functional block using System Verilog UVM and/or C where applicable * You will perform coverage driven verification, monitor regressions and debug resulting failures with the help of the function's designer * You are expected to report on status updates on a regular basis The Must Haves: * Electrical or computer engineering, computer science or other applicable scientific degree at the BEng/BSc or MEng/MSc level * A highly motivated self-starter, able to work independently, while being a team player * Ability to methodically solve complex technical problems * Excellent organization, written and oral (English) communication skills * Proficiency above the intermediate level with the use of System Verilog, SVA, and simulators from major vendors. * Proven ability in determining appropriate and comprehensive digital verification and coverage strategies The Assets: * Experience with UVM. * Experience with formal verification methods * Experience in DSP and/or Forward Error Correction * Experience with mixed-signal design validation * Experience with standards and protocols such as OTN, B100G, Ethernet * Experience with using Jira for bug tracking and GIT for source code management and revision tracking * Familiarity with programming languages such as: Python, Make, bash, object-oriented programming, C, C++, System C Pay Range: The annual pay range for this position in New York is $119,900 - $191,500 USD. The annual pay range for this position in Ottawa is $109,000 - $174,000 CAD. #LI-BH Pay ranges at Ciena are designed to accommodate variations in knowledge, skills, experience, market conditions, and locations, reflecting our diverse products, industries, and lines of business. Please note that the pay range information provided in this posting pertains specifically to the primary location, which is the top location listed in case multiple locations are available. Non-Sales employees may be eligible for a discretionary incentive bonus, while Sales employees may be eligible for a sales commission. In addition to competitive compensation, Ciena offers a comprehensive benefits package, including medical, dental, and vision plans, participation in 401(K) (USA) & DCPP (Canada) with company matching, Employee Stock Purchase Program (ESPP), Employee Assistance Program (EAP), company-paid holidays, paid sick leave, and vacation time. We also comply with all applicable laws regarding Paid Family Leave and other leaves of absence. Not ready to apply? Join our___to get relevant job alerts straight to your inbox. At Ciena, we are committed to building and fostering an environment in which our employees feel respected, valued, and heard. Ciena values the diversity of its workforce and respects its employees as individuals. We do not tolerate any form of discrimination. Ciena is anEqual Opportunity Employer, including disability and protected veteran status. If contacted in relation to a job opportunity, please advise Ciena of any accommodation measures you may require.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Associate, Integration & Test Engineer Job Code: 26533 Job Location: Rochester, NY Job Description: * Support the set-up, configuration, and documentation of hardware and software systems under test, including loading software onto multiple devices * Support design, development, and implementation of cost-effective procedures for testing and troubleshooting of components, sub-assemblies, assemblies, and systems * Support development of test plans, test procedures, requirements traceability, test reports, test flow, and test case design and implementation * Document testing issues and failures and perform analysis of test results * Support formal systems acceptance testing activities * Present test strategies, plans, and results to internal and external customers * Support failure investigation activities and failure review board (FRB) meetings Qualifications: * Bachelor's degree in electrical engineering, Computer Science, Computer Engineering, Mechanical Engineering, Aerospace Engineering or another related field Preferred Skills: * Knowledge of communications systems, software languages, automated software test, networks, network security, power systems, antennas, RF, and/or mechanical design and analysis * Desired skills include requirements analysis and verification, software scripting and usage of automated testing frameworks and applications In compliance with pay transparency requirements, the salary range for this role in New York state is $58,000 - $108,000. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Scientist, Mission Payload Chief Systems Engineer (Optical Systems) Job Code: 34283 Job Location: On-site in Wilmington, MA or Rochester, NY or Fort Wayne, IN or Palm Bay, FL Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: L3Harris Technologies has an immediate opening for a Mission Payload Chief Systems Engineer in Wilmington, MA to support Space Superiority and Imaging Systems. The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel. L3Harris in Wilmington, MA specializes in space-based, visible and IR payload systems with integrated electromechanical devices used for micro radian level line of sight pointing and focus control. Our collaborate team is looking for Systems Engineers to help design, develop, integrate, test, and deliver space based remote sensing systems to our customers to support our nations most critical capabilities. Essential Functions: • Lead requirements traceability and development of test plans to verify requirements, • Perform technical analysis, manage specifications, and generate design review and technical documents., • Execute design trades to support technical decisions, • Lead design reviews (PDR, CDR, etc.), • Lead integration and test of electro-optical/infrared systems and related hardware/software, • Lead product test and design verification, requirements sell-off, and end item data package generation efforts, • Support/lead data analysis and modeling and simulation, • Evaluate space vehicle and end customer needs to help define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces, • Evaluate and mitigate risk within the program, • Mentor a growing, talented team of Systems Engineers, • Contribute to proposal activities, • Program planning, guidance, and execution Qualifications: • Bachelor’s Degree in engineering and a minimum of 12 years of prior relevant experience. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience., • Active Secret security clearance, • 5+ years of systems engineering technical leadership experience, • 5+ years experience with space-based payload or vehicle systems, • Professional experience performing technical analysis, managing specifications, and generating design review and technical documents, • Experience designing, procuring, fabricating and/or testing laser subsystems or focal plane array subsystems, • Experience with active and passive remote sensing (LIDAR/Laser/Focal Plane Subsystems), • Systems engineering experience in electro-optical hardware development, • Experience leading large space programs across the full system lifecycle, • Comfortable negotiating technical and non-technical scope with customers, • Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline, • Experience generating/managing requirements at various levels of the system and flowing down requirements to sub-systems/sub-components, • Experience using DOORS and/or MBSE software such as CAMEO and MagicDraw, • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Ability to manage multiple and competing priorities, • Experience leading program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR), • Ability to collaborate across all levels of leadership, • Excellent inter-personal and communication skills, ability to interact with a cross functional team, act as customer interface, • Ability to architect an end-to-end space system with a full understanding of the product lifecycle, • Experience with project management aspects of technology development programs L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Scientist, Mission Payload Chief Systems Engineer (Optical Systems) Job Code: 34283 Job Location: On-site in Wilmington, MA or Rochester, NY or Fort Wayne, IN or Palm Bay, FL Job Schedule: 9/80 (Every other Friday off!) Relocation: Relocation assistance is available to qualified applicants Job Description: L3Harris Technologies has an immediate opening for a Mission Payload Chief Systems Engineer in Wilmington, MA to support Space Superiority and Imaging Systems. The ideal candidate for this position will be proficient in all aspects of the systems engineering process, will have direct and significant experience designing and testing complex systems, and will be comfortable coordinating teams of technical personnel. L3Harris in Wilmington, MA specializes in space-based, visible and IR payload systems with integrated electromechanical devices used for micro radian level line of sight pointing and focus control. Our collaborate team is looking for Systems Engineers to help design, develop, integrate, test, and deliver space based remote sensing systems to our customers to support our nations most critical capabilities. Essential Functions: • Lead requirements traceability and development of test plans to verify requirements, • Perform technical analysis, manage specifications, and generate design review and technical documents., • Execute design trades to support technical decisions, • Lead design reviews (PDR, CDR, etc.), • Lead integration and test of electro-optical/infrared systems and related hardware/software, • Lead product test and design verification, requirements sell-off, and end item data package generation efforts, • Support/lead data analysis and modeling and simulation, • Evaluate space vehicle and end customer needs to help define and coordinate system performance requirements, integrate technical parameters and assure compatibility of all physical, functional and program interfaces, • Evaluate and mitigate risk within the program, • Mentor a growing, talented team of Systems Engineers, • Contribute to proposal activities, • Program planning, guidance, and execution Qualifications: • Bachelor’s Degree in engineering and a minimum of 12 years of prior relevant experience. Graduate Degree and a minimum of 10 years of prior related experience. In lieu of a degree, minimum of 16 years of prior related experience., • Active Secret security clearance, • 5+ years of systems engineering technical leadership experience, • 5+ years experience with space-based payload or vehicle systems, • Professional experience performing technical analysis, managing specifications, and generating design review and technical documents, • Professional experience leading product test and design verification, requirements sell-off, and end item data package generation efforts Preferred Additional Skills: • Experience designing, procuring, fabricating and/or testing laser subsystems or focal plane array subsystems, • Experience with active and passive remote sensing (LIDAR/Laser/Focal Plane Subsystems), • Systems engineering experience in electro-optical hardware development, • Experience leading large space programs across the full system lifecycle, • Comfortable negotiating technical and non-technical scope with customers, • Technical Subject Matter Expertise in optical, electro-optical, electrical, mechanical, electromechanical, or equivalent engineering discipline, • Experience generating/managing requirements at various levels of the system and flowing down requirements to sub-systems/sub-components, • Experience using DOORS and/or MBSE software such as CAMEO and MagicDraw, • Relevant experience with the design, manufacture, integration, test and sell-off of space-based EO/IR subsystems., • Ability to manage multiple and competing priorities, • Experience leading program milestone reviews (SRR, SDR, PDR, CDR, FCA/PCA, PSR), • Ability to collaborate across all levels of leadership, • Excellent inter-personal and communication skills, ability to interact with a cross functional team, act as customer interface, • Ability to architect an end-to-end space system with a full understanding of the product lifecycle, • Experience with project management aspects of technology development programs, • Experience with estimating and managing costs & creating and managing schedules In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $153,000.00 - $284,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer – FPGA Modem Development Job Code: 33182 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: * Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. * Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. * Broad experience in embedded system design and solutions for communications systems. * Architect, Implement, and verify complex algorithms in FPGAs and Software * Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. * Work with cross functional teams as needed to define and refine design requirements and implement. * Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. * Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications * Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. * Ability to obtain a Secret Clearance Qualifications: Bachelor's Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $90,500- $168,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Electrical Engineer Job Code 33357 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days – totaling 80 hours worked – and have every other Friday off Job Description: As a member of the Hardware Design Verification and Validation (HDV) team, responsibilities will include design and automation of RF test and measurement systems for testing and characterization of complex military communication/networking equipment. In addition, the position will include collaboration with other scientists, engineers, and management to analyze test data, generate visualizations, and create reports. Essential Functions: * Design, develop, and debug software applications for control/automation of test and measurement equipment using NI LabVIEW and TestStand * Continuous improvement of measurement algorithms, techniques and reporting to improve quality and reduce overall test time * Consult with electrical engineers and other engineering staff to evaluate measurement techniques and corresponding measurement data as they relate to operational performance requirements of new products * Organize, analyze, and interpret large data sets from varying sources using automation where feasible. Develop reports from this data to represent and communicate product performance. * Provide leadership, coaching, and mentoring to other engineers on the HDV team * Positive attitude, openness to new ideas, willingness to learn new tools. * Ability to Obtain a US Security Clearance Qualifications: * Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: * Proficiency with Object-Oriented Programming and Design (OOP/OOD) * Familiarity with software management tools (e.g. SVN/GIT, JIRA) * RF and baseband test and measurement experience. Familiarity with test equipment such as: Spectrum/Network analyzers, Power Meters, DMMs, Oscilloscopes, Audio analyzers * Experience with RS-232, Ethernet, USB, TCP/IP * Networking and Radio communication system experience * Familiarity with Linux-based operating systems * Familiarity with Python, C#.NET, XML, HTML/CSS/JS * Strong verbal and written communication skills * LabVIEW Programming experience * Test and Measurement experience In compliance with pay transparency requirements, the salary range for this role in New York state is $79,000- $146,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Scientist, Systems Engineering Job Code: 33765 Job Location: Rochester, NY Job Schedule: 9/80- employees work 9 out of 14 days, totaling 80 hours worked- and have every other Friday off Job Description: As a system engineer at Wescam USA you can anticipate to work closely with internal and external customers to architect, design and develop high-performance EOIR sensors for challenging mission requirements. Engagement will involve end-to-end product life-cycle, spanning from design synthesis, requirement definition, managing and flow-down, proto-type build and verification and strategies for product support. Essential Functions: * Provide technical leadership for the execution/development of EO/IR projects and contracted programs * Develop system specifications and interface control documents * Maintain requirement traceability in IBM DOORS * Support Program Management and Project Engineering during execution of customer funded programs and new product developments * Support product level design and analysis * Perform functional verification tests and support system integration verification/validation tests * Generate qualification plans, qualification summary reports and qualification by similarity reports * Participate in and provide inputs to system design reviews * Ensure deliverable product meets the design objectives * Collaborate with Senior Engineers, internal stake-holders, and external customers and suppliers on the creation of new product features and sensors * Keep in synchronization with Systems Engineering industry trends and new technology that may be relevant to L3Harris Wescam present and future development * Eligible for a US government security clearance Required Qualifications: * Bachelor's Degree and minimum 12 years of progressive technical and project experience, or Graduate Degree and a minimum of 10 years of prior related experience, or in lieu of a degree, minimum of 16 years of prior related experience. Preferred Additional Skills: * Minimum of 2 years experience in one or more of the following: * * Knowledgeable about Systems Engineering life cycle process * User level knowledge on IBM Doors * Understanding of MIL-STD-810, MIL-STD-461, MIL-STD-704 and RTCA DO-160 standards * Strong leadership, planning, organizational and analytical skills * Ability to deal directly with internal and external customers * Familiarity with AS9100 quality management system * Excellent verbal and written communication skills * Familiarity with MBSE modelling an asset * Programming skills in Matlab, Python, and/or database management is desirable In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $153,000 MIN - $284,000 MAX. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $133,000 MIN - $247,000 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Senior Specialist, Electrical Engineer FPGA Modem Development Job Code: 33182 Job Location: Rochester, NY Job Schedule: 9/80; Employees work 9 out of every 14 days totaling 80 hours worked and have every other Friday off Job Description: L3harris is seeking signal processing focused digital design and verification engineers to support our development of tactical communication products. The candidate will function in an FPGA developer/verification role, working in a cross functional team environment to design, verify and test modem/signal processing-based FPGA firmware for radio communication systems. Successful candidates must have experience with RTL development using VHDL, as well as FPGA verification methodologies using SystemVerilog. Candidate will be required to analyze requirements, create FPGA specifications/development plans, create FPGA verification/test plans, code firmware designs in VHDL, code test benches in System Verilog, and verify designs meet requirements. Essential Functions: * Ability to analyze system requirements and architect FPGA based processing solutions based on requirements the latest FPGA digital technology. * Experience implementing complex modem and/or DSP circuits in programmable logic using FPGA devices. Equivalent experience in ASIC design is also applicable. * Broad experience in embedded system design and solutions for communications systems. * Architect, Implement, and verify complex algorithms in FPGAs and Software * Perform detailed analysis including requirements analysis, use case scenarios, conceptual design, trade studies, test, operation, and maintenance of radio communications products. * Work with cross functional teams as needed to define and refine design requirements and implement. * Develop self-checking test benches for FPGA design verification and validation using SystemVerilog. * Assist in the development of high-level and detailed verification test plans consistent with system requirements and specifications * Prepare design and implementation reviews. Present technical briefings and status to internal and external customers. * Ability to obtain a Secret Clearance Qualifications: Bachelors Degree and minimum 7 years of prior relevant experience. Graduate Degree and a minimum of 9 years of prior related experience. In lieu of a degree, minimum of 13 years of prior related experiencein FPGA development. E xperience developing and verifying FPGA/ASIC based embedded system solutions. E xperience in FPGA/ASIC development using VHDL or Verilog E xperience in FPGA/ASIC verification using SystemVerilog Experience with integrating FPGA firmware on hardware Experience with FPGA Vendor Specific FPGA Implementation tools (Vivado/Quartus/Libero) Experience working in a Linux based development environment Preferred Additional Skills: Experience with MatLab, Simulink or similar digital signal processing (DSP) modelling tools Experience in communication system signal processing theory and waveform design Experience with TCL or Python scripting languages Working knowledge and experience in implementation and testing of MODEM RF Designs Experience with Universal Verification Methodology (UVM) Working knowledge and experience with vendor specific FPGA verification tools (Mentor Questa, Visualizer) Active US Government security clearance Ability to work efficiently with remotely located teams and co-workers Solid technical writing skills and ability to communicate technical concepts/solutions both inside and outside of the organization. Experience with Software Configuration Management (SCM) tools such as SVN (Subversion), GIT (Bitbucket), etc. In compliance with pay transparency requirements, the salary range for this role in New York State is $90,500- $168,500. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-MA1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish. by Jobble

Job Description Allient-Rochester (formerly ORMEC Systems, Inc.), a subsidiary of Allient Inc., specializing in motion control systems, including motion controllers, servo drives, motors, and integrated automation solutions is in growth mode and currently seeking a Senior Embedded Software Engineer to join our team in Rochester, New York! Allient-Rochester services the aerospace & defense, medical, semiconductor equipment, e-mobility & logistics, factory & industrial automation, and packaging industries, Allient-Rochester’s tradition of innovation and excellence in motion control continues to grow as part of Allient’s global network of motion and control solutions. The Senior Embedded Software Engineer researches, designs, and develops embedded software systems in collaboration with hardware product development. This role requires a high level of independence and leadership, particularly in complex projects, and involves managing the full software development lifecycle, contributing to technology strategy, on-time delivery of software projects, and mentoring junior engineers. Apply now! Responsibilities: • Design, implement, and optimize embedded motion control, servo, and I/O systems to meet aggressive performance, determinism, and reliability requirements., • Own critical subsystems within larger product architectures., • Serve as a technical authority for EtherCAT and real-time fieldbus architectures., • Lead the design and implementation of high-performance communication stacks, synchronization strategies, and distributed systems between controllers and drives., • Lead integration and optimization of multiple industrial protocols. Ensure robust interoperability with third-party systems and controllers., • Contribute to and own portions of system-level architecture for embedded platforms, spanning firmware, real-time OS, communication layers, and hardware/firmware boundaries., • Translate high-level architectural direction into robust subsystem designs that scale across products., • Research and integrate new technologies to enhance product capabilities., • Coordinate technologies with industry partners and vendors; interface with vendors to select/customize purchased software, support programs, and hardware such as single board computers., • Investigate and resolve software issues, implementing enhancements and optimizations., • Oversee all phases of software development (design, coding, testing, documentation, deployment, and maintenance)., • Create and maintain verification and regression tests for all aspects of the design of developed products., • Manage projects independently, adapting to complexity and scale., • Support a culture of continuous improvement and innovation within the team, engaging in advanced training and professional development initiatives., • Collaborate with cross-functional teams to ensure cohesive system design and support the alignment of software development projects with organizational goals and product roadmaps., • Adhere to best practices in software development and documentation, ensuring compliance with industry standards and regulatory requirements., • Stay updated with emerging technologies and methodologies to contribute to efficiencies and competitive advantages in software engineering processes., • Provide mentorship and technical guidance to junior engineers., • Contribute to technology roadmaps and strategic planning for software development., • Lead efforts in continuous improvement, innovation, and best practices., • Lead and actively participate in all phases of the product lifecycle—architecture, implementation, review, documentation, testing, release, and long-term maintenance., • Own complex problem investigations in the field and drive root-cause analysis and systemic improvements., • Support coordination across teams, including hardware, QA, and product management., • As a Team Leader, oversee the daily operations of the software engineering team, including task assignments, performance monitoring, and technical guidance (as assigned)., • Bachelor’s or Master’s degree in Computer Science, Software Engineering, or a related field., • 10+ years of professional experience in embedded software/firmware development., • Demonstrated ownership of complex embedded systems or product architectures in production environments. Don't let this opportunity pass you by - APPLY TODAY! To learn more about Allient Inc. visit *Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Scientist, Systems Engineering Job Code: 33765 Job Location: Rochester, NY Job Schedule: 9/80- employees work 9 out of 14 days, totaling 80 hours worked- and have every other Friday off Job Description: As a system engineer at Wescam USA you can anticipate to work closely with internal and external customers to architect, design and develop high-performance EOIR sensors for challenging mission requirements. Engagement will involve end-to-end product life-cycle, spanning from design synthesis, requirement definition, managing and flow-down, proto-type build and verification and strategies for product support. Essential Functions: * Provide technical leadership for the execution/development of EO/IR projects and contracted programs * Develop system specifications and interface control documents * Maintain requirement traceability in IBM DOORS * Support Program Management and Project Engineering during execution of customer funded programs and new product developments * Support product level design and analysis * Perform functional verification tests and support system integration verification/validation tests * Generate qualification plans, qualification summary reports and qualification by similarity reports * Participate in and provide inputs to system design reviews * Ensure deliverable product meets the design objectives * Collaborate with Senior Engineers, internal stake-holders, and external customers and suppliers on the creation of new product features and sensors * Keep in synchronization with Systems Engineering industry trends and new technology that may be relevant to L3Harris Wescam present and future development * Eligible for a US government security clearance Required Qualifications: * Bachelors Degree and minimum 12 years of progressive technical and project experience, or Graduate Degree and a minimum of 10 years of prior related experience, or in lieu of a degree, minimum of 16 years of prior related experience. Preferred Additional Skills: * Minimum of 2 years experience in one or more of the following: * * Knowledgeable about Systems Engineering life cycle process * User level knowledge on IBM Doors * Understanding of MIL-STD-810, MIL-STD-461, MIL-STD-704 and RTCA DO-160 standards * Strong leadership, planning, organizational and analytical skills * Ability to deal directly with internal and external customers * Familiarity with AS9100 quality management system * Excellent verbal and written communication skills * Familiarity with MBSE modelling an asset * Programming skills in Matlab, Python, and/or database management is desirable In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $153,000 MIN - $284,000 MAX. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $133,000 MIN - $247,000 MAX. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. #LI-SC3 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish. by Jobble

As we thrive together QuidelOrtho is seeking a Verification and Validation Engineer II to help with formal verification and validation of complex medical devices under the regulations of the FDA.

Job Description Rochester, NY | Full-Time Aerospace / Defense Communications Systems FPGA / ASIC Verification Engineer Multiple U.S. Locations | Full-Time Aerospace / Defense Communications Northwest Talent Solutions is recruiting on behalf of an innovative defense technology client developing secure tactical communication systems used by military personnel and first responders worldwide. We are seeking a FPGA / ASIC Verification Engineer to help verify next-generation FPGA solutions powering advanced radio communication platforms. This is an opportunity to work on mission-critical embedded systems, modern verification frameworks, and complex communications technology in a highly collaborative engineering environment. Flexible schedules include 9/80 (every other Friday off) or standard 5/8 workweeks. Responsibilities: Perform FPGA design verification and validation for embedded communication systems Develop coverage-driven verification plans from planning through closure Create self-checking test benches using SystemVerilog within UVM frameworks Develop agents, sequences, cover groups, predictors, and scoreboards Write randomized and directed tests to achieve functional coverage goals Analyze system requirements and develop verification test plans Work cross-functionally with hardware, firmware, and systems engineering teams Support design reviews and technical briefings Required Qualifications Bachelor's degree in Electrical Engineering, Computer Engineering, or related field 6+ years of FPGA/ASIC verification experience (or equivalent experience) Strong experience with SystemVerilog verification environments Familiarity with UVM or OVM methodologies Experience verifying embedded FPGA-based systems Ability to obtain a U.S. Security Clearance Preferred Experience Debugging FPGA firmware and hardware issues Ethernet packet processing or communications protocols Embedded cryptographic algorithms or secure communications systems Mentor Graphics verification tools FPGA/ASIC RTL design exposure Programming with C++, Java, or other object-oriented languages Scripting using Python, Bash, Perl, or Tcl Linux development environments Interfaces such as Ethernet, AXI, SPI Compensation & Benefits Base Salary: $110,000 – $140,000 Full Benefits Package 401(k) with Employer Match Medical, Dental, Vision Education Assistance PTO + Paid Holidays Relocation Assistance Available About Northwest Talent Solutions Northwest Talent Solutions partners with leading technology and defense organizations to connect highly specialized engineering talent with impactful, mission-driven work. If you are passionate about advanced FPGA verification, embedded systems, and communications technology, we would love to connect. Apply Today Qualified candidates will be contacted quickly. #FPGA #ASIC #VerificationEngineer #SystemVerilog #UVM #EmbeddedSystems #HardwareEngineering #DigitalDesign #SemiconductorCareers #DefenseTechnology #ElectricalEngineering #LinuxEngineering #EngineeringJobs #TechCareers

Job Description Title Quality Engineer Department Quality Reports to Director, Quality & Product Assurance SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area and departmental quality functions. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services. · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis. · Clean, inspect and evaluate assigned product(s) to specifications and requirements. · Lead and participate in internal audits. · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers. · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval. · Perform / coordinate environmental, durability, reliability and other testing as needed. · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages. · Work with Supply Chain to improve and control RPO supply base. · Issue, manage, validate and close CAPAs. · Create, manage and participate in ECOs. · Implement and manage RPO document control system. · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required. · Identifies and recommend improvement opportunities. · Engage in quality improvement assigned projects. · Other duties as assigned You have: · Associate’s degree required in Quality, Engineering, Engineering Technology, or a closely related technical discipline. · Bachelor’s degree strongly preferred, particularly in Engineering, Quality, or Applied Sciences. · Minimum of 5 years of progressive, hands‑on quality experience within manufacturing, optical, aerospace, or precision‑engineering industries. · Demonstrated track record of increasing responsibility in quality systems, process control, or product assurance. · ASQ certifications (CQE, CQA, CQT, CSSGB, etc.) are highly advantageous. · Proficiency with quality inspection equipment and inspection methodologies. · Strong computer skills, including Microsoft Office; Minitab preferred. · Ability to interpret optical and mechanical drawings, engineering standards, and technical specifications. · Working knowledge of ISO 9001, AS9100, AS9102, MIL‑STD‑810, MIL‑PRF‑13830, ISO 10110, and other relevant industry standards. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, and related quality methodologies. · Experience with environmental and performance test equipment, including thermal, salt, and humidity chambers. · Familiarity with government property control requirements. You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: • While performing the duties of this job, the employee is regularly required to stand: use hands and fingers to handle or feel: and reach with hands and arms. The employee frequently is required to stand, walk, stoop, kneel, crouch, • The job may involve prolonged periods of sitting/standing., • Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain), • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp., • The employee is frequently required to use the computer., • May involve the use of oils and solvents., • Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided), • Generally works in a clean environment and works to maintain the environment as such., • Safety Glasses are required in specific areas., • May require area specific safety training, • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: • · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program., • · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans., • · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance., • · Balance: 11 paid holidays, generous paid vacation and sick time, • · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday - Friday, 7am - 3:30pm

Job DescriptionDescription: Technical Manager-MV Renewables Lead Medium-Voltage Renewable Energy Projects and Drive Technical Excellence Fisher Associates is seeking a Technical Manager-MV Electrical Engineering to lead medium-voltage (MV) renewable energy engineering and design for utility-scale and commercial renewable energy projects, including solar PV, battery energy storage systems (BESS), and wind power. In this role, you will provide senior-level electrical engineering leadership, oversee design QA/QC, calculations, redline reviews, and deliverable verification, ensuring all work complies with industry codes, permitting requirements, utility standards, and client specifications. You will mentor and develop electrical engineers from junior to senior levels, guide projects from preliminary engineering through Issue for Construction (IFC), and help deliver safe, reliable, high-quality renewable energy infrastructure. If you’re ready to lead medium-voltage renewable energy engineering projects and help advance the clean energy transition, apply today and bring your expertise to a growing, innovative team. About Fisher Associates At Fisher Associates, we are a multidisciplinary design services firm with nine locations nationwide. Our services span civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental services, land surveying, GIS, construction inspection, precast, and construction engineering, each offering opportunities to shape communities and improve lives. What You’ll Do as a Technical Manager-MV Renewables • Lead medium-voltage (MV) electrical engineering design for renewable energy projects including solar PV, BESS, and wind, • Provide senior technical leadership and serve as a subject matter expert for electrical engineering teams, • Oversee QA/QC reviews of electrical designs, calculations, redlines, and construction deliverables, • Mentor engineers and drafters, ensuring technical accuracy and high-quality drawing production, • Collaborate with Project Managers, Technical Leads, and multi-discipline teams across all project phases, • Develop scopes of work, technical specifications, and phased design packages (30%, 60%, IFC), • Perform and review electrical calculations including load flow, short circuit, grounding, protective coordination, ampacity, voltage drop, and equipment sizing, • Apply expertise in MV collection systems with working knowledge of HV substations and gen-tie systems, • Ensure compliance with NEC, IEEE, NFPA, NERC, utility standards, and permitting requirements, • Support proposals with engineering scopes, design assumptions, and cost estimates, • Conduct power system and interconnection studies (CESIR, SIS, BOP solutions), • Support construction with field engineering, site visits, and as-built reviews, • Drive continuous improvement through updated standards, processes, and engineering tools Requirements: What You Bring, Your Expertise as a Technical Manager-MV Renewables • Bachelor’s degree in Electrical Engineering from an accredited university, • 15+ years of electrical engineering experience supporting renewable energy and power generation projects, • Active Professional Engineer (PE) license required, • Experience with solar PV, BESS, wind, and renewable EPC projects, • Proven expertise in short circuit, load flow, grounding, protective coordination, cable sizing, ampacity, and equipment sizing, • Ability to read and interpret MV/HV single-line diagrams (SLDs), • Proficiency with AutoCAD, PVCase, PVSyst, ETAP, SKM, and Civil 3D, • Strong working knowledge of IEEE, NFPA, NEC, and NERC codes, • Understanding of renewable and conventional power plant regulatory environments, DC/AC systems, and interconnection processes, • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Driven to own projects, prioritize effectively, and thrive in a fast-paced, growth-focused environment, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trusting relationships through collaboration integrity, respect, and active listening, • Curious, improvement-minded, and always seeking better solutions, • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams., • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Remote

Job DescriptionSenior FPGA Electrical Engineer – Signal Processing Employment Type: Full-Time (9/80 Schedule) Industry: Aerospace / Defense Job Summary Our Client is seeking a Senior FPGA Electrical Engineer to support the development of advanced tactical communication systems. This role focuses on FPGA-based digital design and verification, working within cross-functional engineering teams to architect, implement, and validate complex modem and signal processing solutions in programmable logic devices. Position Impact This position plays a critical role in delivering high-performance, mission-ready communication technologies by designing and verifying FPGA firmware that supports secure, reliable signal processing in demanding operational environments. As a Senior FPGA Electrical Engineer, you will be responsible for:FPGA Design & Architecture * Analyze system requirements and architect FPGA-based digital processing solutions. * Implement complex modem and DSP algorithms in FPGA or ASIC environments. * Develop RTL designs using VHDL (or Verilog). * Integrate FPGA firmware onto hardware platforms. Verification & Validation * Develop self-checking test benches using SystemVerilog. * Create detailed verification plans aligned with system specifications. * Perform design validation, trade studies, and performance analysis. * Support integration, test, and system-level verification activities. Cross-Functional Collaboration * Work closely with multidisciplinary engineering teams to refine requirements and implement solutions. * Present technical reviews and status briefings to internal stakeholders. * Support lifecycle phases including design, test, operation, and sustainment. Must-Have Qualifications * Bachelors degree in Electrical Engineering or related discipline (or equivalent experience). * Minimum 7+ years of FPGA or ASIC development experience in embedded systems. * Strong experience with RTL development using VHDL or Verilog. * Experience with FPGA verification methodologies using SystemVerilog. * Experience implementing and verifying complex digital signal processing or modem-based systems. * Familiarity with vendor-specific FPGA implementation tools (e.g., Vivado, Quartus, Libero). * Experience working in Linux-based development environments. * Ability to obtain a U.S. Government security clearance. Preferred Qualifications * Experience with DSP modeling tools such as MATLAB or Simulink. * Knowledge of communication system signal processing theory and waveform design. * Experience with scripting languages such as TCL or Python. * Familiarity with UVM and FPGA verification tools (e.g., Questa). * Experience in RF modem design and testing environments. * Active U.S. security clearance. * Experience with source control tools such as Git or SVN. Support for Your Career and Life * Alternative 9/80 work schedule (every other Friday off) * Comprehensive benefits package * Relocation assistance available * Exposure to advanced aerospace and defense technologies * Long-term growth within secure communication systems engineering

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • Compassion: We care about our talented and loyal PEKO family., • Safety: We are committed to providing a safe, clean, and positive workplace., • Integrity: We believe in transparency, honesty, and respect for all stakeholders., • Agility: We are dedicated to maintaining an agile and financially prudent organization., • Endurance:We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $80,000 - $90,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR N4jTrb8oH0

Job Description Insero Talent Solutions is recruiting a Supplier Quality Engineer for a manufacturing company in Rochester, NY. General Responsibilities: Responsible for supporting supplier quality and development, supplier strategic initiatives, assessing QMS systems, and proactively working on improved incoming components / material (reduced DPPM). Specific Duties: • Work Cross-functionally with Engineering, Manufacturing, Purchasing, and internal Quality Engineers to assess risk and approve suppliers for new and existing products, • Works with suppliers to ensure compliance to requirements, assessing risk, identification of critical characteristics, approval and verification of corrective and preventative actions, • Review and approve supplier Production Part Approval Process (PPAP) and First Article Inspection Reports (FAIR) for new part introduction and existing part revisions, • Facilitates Advanced Product Quality Planning (APQP) requirements including, determination of control plans, process instructions, inspection and testing requirements, statistical process control (SPC), and calibration & measurement system analysis, PFMEAs, • Participate in the MRB process to identify, evaluate, and dispose of nonconforming product, • Lead root cause analysis and corrective action with suppliers, • Process Supplier Waivers, • Conduct timely and compliant supplier audits as required, • Ability to work effectively in a fast-paced environment with short deadlines, • Works with various quality systems: ISO 9001, AS 9100, IATF 16949 and ISO 14001, • Support Company's internal quality auditing process as required, • Strong knowledge of Six Sigma methodology, problem solving tools, and advocates utilization throughout the organization, • Travel to suppliers as needed (approximately 30%) Qualifications: • 5-7 years minimum experience functioning in a quality or supplier quality role with a strong knowledge in commodities including machining, electronics, raw materials, hardware, and special processes required, • Bachelor's degree in an engineering or technical field required, • Familiarity with manufacturing of components (i.e. ; Machining, Castings/Forgings, Injection Molding, Metal fabrication stampings, electronics, plating) as well as raw materials including various metals and plastics, • Experience with APQP and PPAP including the use of Control Plans and Process Flow Diagrams Comprehensive understanding of Failure Mode Effect Analysis (FMEA) including Design (DFMEA) and Process (PFMEA), • Experience with advanced Quality Management Systems: AS9100 and IATF 16949, • Strong background with various supplier tools/activities including corrective actions, problem solving supplier audits, supplier score cards and risk assessments, • Strong statistical analysis and mathematical ability including Measurement Systems Analysis and Capability Studies, • Experience with GD&T metrology, inspection/testing procedures and methodology, • Problem solving tools such as the Shainin System (Red-X method) and 8D Analysis highly desirable, • Maintain positive supplier relations, which will require some travel to customers and supplier (up to 30%), • Black Belt certification is preferred, • Excellent communication skills (written and verbal), • Self-starter with minimal supervision, • ASQ certification (CQE & CQA) is a plus

Job DescriptionSenior Specialist, Engineering Services (RF / Test / Electronics) – Relocation Available | 9/80 Schedule Rochester, NY Hands-on Engineering | RF Systems | Test & Validation | Electronics Lab Why This Role Stands Out: This is a high-impact, hands-on engineering role supporting the development, testing, and optimization of advanced electronic and RF-based systems. You'll work directly with engineering teams to troubleshoot, validate, and improve complex hardware systems in a lab-driven, innovation-focused environment. If you enjoy getting close to the hardware, solving real engineering problems, and working on systems that demand precision—this is your opportunity. What You'll Be Doing: • Perform system-level testing, troubleshooting, and fault isolation on advanced electronic and RF systems, • Support integration, validation, and verification (V&V) activities, • Work hands-on with oscilloscopes, logic analyzers, voltmeters, and diagnostic equipment, • Build, repair, and modify cables, RF hardware, and electronic assemblies, • Identify and resolve hardware defects and performance issues, • Support engineering development labs, including calibration and asset tracking, • Collaborate cross-functionally with engineering teams to improve system performance, • Contribute to documentation, reporting, and test analysisWhat You Bring:, • Bachelor's degree (or equivalent experience) in Engineering or related field, • 6+ years of hands-on engineering experience, • Strong experience with:, • Electronic troubleshooting and test equipment, • System-level testing and validation, • Hardware repair and assembly (including SMT components), • Exposure to:, • RF systems, communications hardware, or SDR architectures, • Configuration management tools (Agile preferred), • Failure analysis, diagnostics, and reporting Nice to Have:, • Experience with RF communications systems (ASICs, PLLs, DACs, amplifiers), • Knowledge of IPC standards (610, 620, 7711/7721), • Experience supporting engineering labs or calibration environmentsWhat Makes This Opportunity Unique:, • 9/80 Schedule – Every other Friday off, • Relocation support available, • Work in a high-performance engineering environment with cutting-edge systems, • Precision Matching: We align you to roles that fit your exact technical background—not just keywords, • Speed & Transparency: Direct communication, fast feedback, and real-time updates, • Confidential Representation: We protect your information and advocate on your behalf Apply now or message directly to learn more. #ElectricalEngineering #RFEngineering #TestEngineering #HardwareEngineering #Electronics #AerospaceCareers #EngineeringJobs #Troubleshooting #SystemsEngineering #DefenseTech #NowHiring #EngineeringCareers #RelocationJobs #NWTS #TalentSolutions

Job DescriptionSenior Specialist – Electrical Engineer (Digital Hardware Design) Rochester, NY | Hybrid Engineering Environment | Relocation Available $110K–$140K Base + Full Benefits Security Clearance Eligibility Required A leading advanced communications and aerospace technology organization is seeking a Senior Digital Hardware Engineer to help architect the next generation of Software Defined Radio (SDR) platforms and high-performance embedded systems used in mission-critical environments. This is an opportunity to work on cutting-edge digital hardware powering secure communications systems where performance, reliability, and signal integrity matter at the highest level. If you enjoy solving complex system-level problems at the intersection of embedded processors, high-speed interfaces, and RF architectures, this role offers deep technical ownership across the full hardware lifecycle—from concept through field deployment. What You'll Be Building: You will help design and deliver high-performance embedded digital hardware supporting next-generation communication platforms. Key focus areas include: Embedded microprocessor integration (ARM architectures) High-speed digital interfaces including DDR, Ethernet, and USB Advanced PCB design and architecture for complex high-speed systems Signal integrity and simulation analysis Hardware verification and validation of mission-critical systems Integration with RF and SDR communication architectures You will collaborate with systems, RF, firmware, and software teams to ensure hardware performance meets demanding real-world operational requirements. Tools & Technologies: Engineers in this environment regularly work with: LTSpice HyperLynx MATLAB Mentor VX / DxDesigner Oscilloscopes and logic analyzers Boundary Scan / JTAG tools Experience with SDR architectures, embedded software, Python, VHDL, or Agile PLM is highly valued. Ideal Background: You may be a strong fit if you have: 6+ years of digital hardware design experience Experience integrating embedded processors and high-speed interfaces Proven ability to lead complex PCB design and architecture Experience performing hardware verification, testing, and signal integrity analysis Background in aerospace, defense, communications, or high-reliability electronics Candidates must be eligible to obtain a U.S. security clearance. Why Engineers Pursue Roles Like This: Work on mission-critical communication systems used in real-world operations Solve complex system-level engineering challenges Collaborate with top engineers in embedded systems and RF architecture Enjoy a 9/80 schedule (every other Friday off) Access excellent benefits and relocation support Confidential Search: This role is being conducted as a confidential search by Northwest Talent Solutions, a firm specializing in advanced engineering and technical leadership recruitment. Qualified candidates will receive full client details during the interview process. Interested? Send your resume or connect directly to learn more. #ElectricalEngineering #DigitalHardware #EmbeddedSystems #HardwareDesign #SoftwareDefinedRadio #SignalIntegrity #PCBDesign #AerospaceEngineering #DefenseTechnology #ARMArchitecture #EngineeringJobs #TechCareers

Job Description At C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview The C&S Facilities Group is seeking a Senior Mechanical Engineer / Managing Engineer to join our team in our Syracuse or Rochester office. This is a great opportunity for an individual to help grow our facilities practice. This individual will be responsible for leading projects, performing, and managing technical engineering. The Senior Mechanical Engineer will be responsible for delivery of mechanical engineering services in a multitude of markets including healthcare, higher education, government, aviation, food service, hospitality, and industrial projects in the Southeastern United States. Successful candidates should have experience and/or education in mechanical design for buildings and facilities. This position includes an emphasis on HVAC design (Commercial, Food Service, Industrial); previous field experience is a plus. Required Knowledge, Skills & Abilities: • Bachelor's Degree in Mechanical Engineering, • Minimum 10 years of related experience including skills in mechanical design of HVAC systems, • A Professional Engineering license is highly desired, • Project Management experience desired, • Serves as lead mechanical engineer on projects and/or works in the responsible charge of a licensed mechanical engineer, • Performs mechanical engineering calculations, edits specifications, and prepares design drawings, • Ability to perform Cooling/Heating calculations, Ventilation Calculations, ASHRAE 15 verification, • Familiarity with CHW VAV systems, VRF Systems, DOAS Equipment, Energy Recovery Equipment, • Familiarity with building codes and engineering design requirements, • Assists in developing project mechanical requirements, conducting field surveys, and developing construction documents, • Develop HVAC controls schematics, sequences of operation, and points lists, • Experience with renovation projects, • Coordinates with the other design disciplines in the delivery of mechanical designs, • Performs services during construction including responding to RFI's, reviewing submittals, and performing field observations, • Experience with Revit highly desired, • Beneficial prior project experience on healthcare, higher education, government, aviation, food service, hospitality, and/or industrial projects, • Strong communication, organizational, and interpersonal skills, • Self-motivated and works well in team environment *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job DescriptionJob Overview: At our company, we design and deliver systems that keep military forces and mission partners around the world. We are looking for a Digital Design Electrical Engineer who is excited to take on challenging design problems and help shape the next generation of software-defined radios and tactical communications systems. Key Responsibilities: • Lead the design and development of advanced digital hardware — from concept through production., • Work alongside experts in FPGA, DSP, RF, and embedded systems. Youll gain exposure to the latest high-speed digital interfaces, power-efficient designs, and mission-critical systems integration.Qualifications:, • Bachelors Degree., • Experience in emerging digital design trends (including new parts, manufacturers, capabilities, analysis)., • Experience with high-speed digital communications protocols (USB, Gb Ethernet, PCIeXpress, etc.)., • 6 years of prior relevant experience., • Analysis of electrical requirements to determine feasibility of design within time and cost constraints., • Extensive hands-on experience with test equipment including oscilloscopes, spectrum analyzers, network analyzers, signal generators etc. to establish operating data, conducts experimental tests and evaluate results., • Proficient in the use of high-level programming languages to configure programmable logic devices, control electrical circuits, and to increase job efficiency., • Perform integration with other subsystems including RF, FPGA, DSP, embedded firmware, test equipment, etc., • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Sr. Electrical Engineer to join our team! In this role, you will lead the design and development of advanced digital hardware — from concept through production — while working alongside experts in FPGA, DSP, RF, and embedded systems. You will gain exposure to the latest high-speed digital interfaces, power-efficient designs, and mission-critical systems integration. Key Responsibilities: • Ability of obtain a US Secret Security Clearance., • Proficient in the use of high-level programming languages to configure programmable logic devices, control electrical circuits, and to increase job efficiency., • Perform integration with other subsystems including RF, FPGA, DSP, embedded firmware, test equipment, etc., • Provide timely and thorough response to issues that impact continuous production and generation of revenue in in operations., • Digital hardware research, design, and development related to software defined radios., • Simulation, prototyping, schematic capture, understanding of printed wiring board and flexible circuit layout design, hands on measurement of high speed and other electrical interfaces.Qualifications:, • Bachelors Degree., • 6 years of prior relevant experience.Hours:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionDescription: Technical Manager-High Voltage Lines Hybrid Lead the future of high-voltage transmission design. As a Technical Manager – HV Transmission Lines, you will lead the engineering and technical delivery of high-voltage (HV) and extra-high-voltage (EHV) transmission line projects for utility, renewable energy, and power generation clients. You’ll serve as a senior technical authority, guiding projects through routing, detailed design, QA/QC, calculations, redline reviews, and drawing verification, with a focus on technical excellence rather than hands-on drafting. In this role, you’ll mentor and develop engineers, ensure compliance with industry codes, utility standards, and client requirements, and support projects from early feasibility and routing through construction and energization. Your expertise will directly shape the delivery of safe, reliable, and resilient transmission infrastructure. If you’re ready to lead complex HV/EHV transmission line engineering projects and make a lasting impact on the future of energy delivery, apply today and join a team where your technical leadership truly matters. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. What You’ll Do as a Technical Manager-HV Lines • Serve as senior technical authority (SME) for HV/EHV transmission line engineering projects., • Lead multidisciplinary teams to define client requirements, deliver designs, and provide technical guidance throughout project execution., • Establish and enforce transmission line design criteria aligned with utility standards, industry codes, and client specifications., • Develop and review overhead transmission line and structure models using PLS-CADD, PLS-POLE, and PLS-TOWER., • Prepare and review engineering drawings, specifications, and procurement documents for tubular steel poles, lattice towers, and transmission line hardware., • Review vendor calculations and drawings for compliance with design criteria, codes, and contract requirements., • Develop and review complete transmission line construction packages, including plan & profile drawings, staking sheets, stringing tables, BOMs, structure details, phasing plans, foundation drawings, and installation specifications., • Lead design QA/QC and redline reviews, ensuring accuracy, constructability, and compliance with client and regulatory requirements., • Interpret and apply NESC, IEEE, ASCE, RUS, and utility-specific standards, providing technical direction to project teams., • Maintain accountability for technical accuracy, quantities, and compliance across all deliverables., • Mentor and develop junior engineers and designers, overseeing drawing production and technical growth., • Develop scopes of work, technical specifications, and phased design packages (30%, 60%, IFC) for HV and EHV transmission line projects., • Perform and review line design calculations, including structure loading, conductor selection, sag/tension, clearance analysis, insulation coordination, and grounding., • Support proposal development by preparing engineering scopes, cost estimates, and technical assumptions for multi-discipline RFPs., • Conduct routing studies, optimization analyses, and constructability reviews to improve cost, schedule, and performance., • Drive continuous improvement, integrating new tools, technologies, and design methodologies., • Bachelor’s degree in Electrical, Mechanical, or Civil Engineering from an ABET-accredited university., • 15+ years of progressive engineering design experience in utility power and renewable energy., • Active Professional Engineer (PE) license required., • Advanced proficiency with PLS-CADD, PLS-POLE, and PLS-TOWER for overhead transmission line design., • Strong expertise in HV and EHV transmission systems., • Experience supporting utilities, EPC firms, and renewable energy projects (wind, solar, and infrastructure)., • Working knowledge of distribution system design preferred., • Familiarity with MFAD, LPILE, and geotechnical application for transmission structure foundations., • Thorough knowledge of industry and client standards (NESC, ASCE, IEEE, RUS, NEC, NFPA, NERC)., • Proven leadership of engineering teams and management of complex projects from concept through construction., • Prior people-management experience, including performance reviews and resource planning, preferred., • Proficiency with Microsoft Office and engineering tools such as AutoCAD and Civil 3D., • Professional performance aligned with Fisher’s Mission, Vision, Core Values, and Clientship philosophy., • Dedicated to fostering trusting relationships through collaboration, integrity, respect, and active listening, • Proven ability to deliver quality work through critical thinking, problem-solving, and sound judgment, • Proactively own projects, prioritize effectively, and meet deadlines in a fast-paced, growth environment., • Superior organizational and planning skills with keen attention to detail., • You are empowered to deliver results through collaboration, trust, and ownership., • Your voice matters shaping decisions in an inclusive and transparent culture., • Your growth as a leader is a priority, supported by clear career paths and continuous learning., • You thrive in a positive culture that celebrates wins and keeps work fun and enjoyable., • Your leadership journey focuses on developing, coaching, and empowering high-performing teams. Your Impact Matters, Your Career Thrives. Work on engaging projects and experience first-hand the positive changes you create in your own community. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Equal Employment Opportunity Statement Fisher Associates is committed to fostering a diverse and inclusive workplace where all individuals are respected, valued, and empowered to thrive. We do not discriminate on the basis of any protected status under federal, state, or local law. #LI-Remote

Job Description Engineering Program Manager Department: Product Design Services FLSA Status: Exempt Reports to: Operations Manager, Product Design Services Pay Range: $101,100 - $146,700 annually Location: Rochester, NY The Role: D3 Embedded is seeking a skilled and experienced Engineering Program Manager to act in the role of Chief Engineer where they will lead a team of Engineers to design and develop and cutting-edge embedded systems. The systems are end-to-end solutions containing; sensors, cameras, mmWave Radar, connectivity, embedded processing and Artificial Intelligence (AI) for performance critical applications. The ideal candidate has experience with Embedded Realtime Operating Systems (RTOS) like Embedded Linux, digital imaging, electronics design, software architecture and development, computer vision and machine learning. This position requires strong problem-solving skills, the ability to mentor and guide engineering teams. The Responsibilities: • Lead a project team to develop and an embedded system and realize the solution using company core process, • Collaborate with key stakeholders to define program scope, timing, and deliverables and use them to execute the program and track progress, • Coordinate multi-disciplinary project team leads, • Manage project to milestones (Schedule and Outcomes), • Manage resources including; teams, budgets, and schedules, to maximize customer satisfaction, and project profitability, • Identify, assess, and mitigate risks that may affect program delivery, • Act as the technical decision maker driving complex technical decisions across multiple teams (Facilitates the discussion to define “done”), • Provide primary technical communication with project team and project stakeholders, • Maintain effective communication channels to keep stakeholders updated on project progress and changes, • Facilitate technical and stakeholder meetings, • Responsible for making sure the right people are on each task and the tasks are understood by the team, • Collaborate with management and technical teams on product strategies, • Prep and lead gate/design reviews and provide technical oversight, • Develop and finalize requirements, • Develop electrical and mechanical block diagrams, and high-level software architectures to meet requirements and guide design trade-off decisions, • Provide estimations for next phases of a current project using change requests, • Maintain project documentation, including plans, schedules, budgets, and status reports., • Requestor for Materials purchases and shipments for projects, • Approver for Design Releases (Arena ECOs), • Own the full life cycle of new products/solutions from proof of concept to integration with other components and teams, • Lead and/or participate in all phases of the product development cycle including:, • requirements definition and architecture, • software design and development, • implementing software, • software/hardware integration, • verification and validation, and customer support, • Develop & identify tools / methods for better design reuse & process improvement Other duties as assigned The Right Person Will Have (Required): • 3+ years of experience working as a Technical Lead, Technical Project Manager, or Program Manager for both hardware/software projects., • Bachelor of Science Degree in Software Engineering, Electrical Engineering, Computer Science, Computer Engineering or a related field., • 5+ years of industry experience, • Experience with System Requirements Documentation, Requirements Allocation, Requirements Traceability, and Test Case development and execution. Experience with product and component-level FMEAs., • Self-driven personality, • Capable of a big picture, system-oriented approach, • Solid technical leadership skills, • Strong communication and interpersonal skills The Right Person Will Have (Preferred): • Master of Science or PhD in Computer Vision, Machine/Deep Learning, Computer Science, Computer/Electrical/Software Engineering, or a related field., • Experience with autonomous/industrial robotic platforms and applications, • Experience with embedded and edge processing platforms (Nvidia Jetson devices, Qualcomm Snapdragon devices, and Texas Instrument Jacinto devices in particular), • Experience with edge AI (accelerators, integration, model conversions, deployment, profiling, etc.), • Knowledge of intrinsic and extrinsic calibration procedures for multi-modal sensor systems, • Experience with sensor fusion techniques (calibration, early, mid, late fusion, etc.), • Knowledge of camera optics and computational geometry, • Gstreamer experience, • Robot Operating System (ROS) experience, • Experience with version control systems such as GIT and DVC, • Experience with GPU programming frameworks such as OpenCL and CUDA, • Experience with Embedded Real-Time Operating Systems (RTOS) and Embedded Linux The Benefits: • Competitive total compensation, • Medical and dental coverage, • Employer paid basic life, short-term disability, and identity theft coverage, • Voluntary vision, life, long-term disability, accident, critical illness coverage, • 401k retirement contribution, • Paid holidays, time-off, and sick time, • Tuition assistance and employer paid professional development, • Flexible work schedules, • Remote opportunities available, • Complimentary snacks and beverages Since our founding in 1999, D3 Embedded has driven innovation in high-performance embedded systems development. We leverage our expertise in autonomous machines, sensors, imaging, optics, edge computing, algorithms, robotics, and electrification to provide cutting-edge engineering design and low-volume manufacturing services. Headquartered in Rochester NY, we serve a global network of customers and are proudly connected with many technology leaders and Fortune 500 companies. We are interested in bright, creative, and team-oriented individuals exhilarated by the opportunity to transform the world through frontier technologies. Candidates must be eligible to work in the United States. D3 Embedded does not sponsor visas. For more information about D3 Embedded, please visit . D3 Embedded is committed to fostering a diverse work environment and proud to be an Equal Opportunity Employer. We consider and hire applicants without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender, gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, or membership in any other group protected by federal, state or local law. D3 Embedded participates in E-Verify, a federal program that confirms employment eligibility upon hire. Powered by JazzHR eptdMFVp5b

Job DescriptionJob Summary Vanteon is seeking applicants for senior-level embedded software roles, including as Principal Embedded Engineer and Senior Principal Embedded Engineer. The specific level will be dependent on the applicant's level of experience. The position will design and develop Petalinux Board Support Package and MAC layer communications firmware for custom hardware. Specific platforms would include the Xilinx Zynq ARM and ADI ADRV900X Transceiver platforms. Duties/Responsibilities The following is a list of expected duties to be involved in this position, this is not fully inclusive, and management may assign other duties: • Analyze system for identification of use cases and development of System Requirement Specifications., • Design and implement embedded software, device drivers, and board support packages., • Investigate and propose project-related technologies to meet requirements., • Create technical documentation including Software Requirements Specifications, Design Documents, Test Summary Reports, and development notes., • Collaborate with hardware engineers for design and integration efforts., • Define and execute engineering verification and acceptance criteria tests.Required Skills & Knowledge, • Experience in real-time embedded systems software development for Linux, RTOSs, MAC sublayer, multi-threaded programming, distributed design, device drivers, hardware diagnostics, BIOS, interrupt handling and boot loader development., • BSP creation and new hardware bring-up for bare-metal, RTOS, and Linux platforms, • Proficiency with C, C++ and ability to work with assembly level for embedded microprocessors and/or DSPs, • Advanced object-oriented design approaches to reusable software systems design, • Experience using embedded tools such as compilers, debuggers, ICE, Emulators, • Make and version control systems experience, • Interface hardware/software design experience, • Proven track record of successful product completion and deployment, • Excellent analytical and communication skills, • Highly motivated, well organized self-starterDesired Skills, • Xilinx Petalinux bring-up, customization, and Zynq hardware integration, • ADI ADRV9002 configuration and control, • OpenAmp, • Linux Yocto build recipes, • Linux kernel and application software development, • Linux Ethernet driver stack configuration and routing (OpenWRT, etc.), • Linux virtual machine & docker container development, • SE Linux, • Linux IMA, • TPM integrationEducation and Experience, • BS EE/CE/CS/SE, • 5+ years' experience in embedded systems softwareOther Requirements, • Training and regular duties require a physical office presence. Although Vanteon will comply with all NYS/Federal requirements related to COVID-19, candidates will be expected to work on-site., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Please note that all offers for hire are contingent on passing e-verify, background, and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionJob Overview: Join our team as a Digital Hardware Engineer will take ownership of the full hardware lifecycle—from conceptualizing high-level requirements to seeing your designs move through manufacturing and into the field. Key Responsibilities: High-Speed Digital Protocols: • Proficient use of simulation tools such as LTSpice for circuitry, HyperLynx for signal integrity, and MATLAB for system-level modeling., • Advanced Architecture & PCB Design:, • Ability to obtain and maintain a US Security Clearance.Qualifications:, • Bachelor's degree in electrical/computer engineering or a related field. Specialized Knowledge: • Familiarity with SDR architectures, embedded SW/VHDL, and configuration management tools like Agile., • Proficiency with Agile PLM software to manage product data and streamline manufacturing introduction., • Diagnostic Tool Proficiency: Familiarity with Boundary Scan tools (JTAG) for testing high-density PCBAs where physical probe access is limited. Hours:, • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Job DescriptionJob Summary Vanteon is seeking applicants for a Digital Signal Processing Engineer position. The candidate will be responsible for modem and waveform development, digital signal processing, analysis & simulation for wireless systems, and RF system design. This is not an entry-level role; it requires advanced education and experience in communications and signal processing. Only qualified applicants will be considered for this position. Duties/Responsibilities The following is a list of expected duties to be involved with the position. It is not fully inclusive, and additional ones may be assigned as determined by management: • Develop and implement algorithms for digital signal processing applications., • Design and optimize digital filters, signal transforms, and other signal processing techniques., • Analyze and interpret data to extract meaningful insights and develop actionable recommendations., • Collaborate with cross-functional teams to integrate signal processing solutions into hardware or software systems., • Conduct performance evaluation and optimization of signal processing algorithms on various platforms., • Participate in the design and development of real-time signal processing systems., • Troubleshoot and debug signal processing algorithms and systems to ensure optimal performance., • Document design specifications, implementation details, and testing procedures., • Provide technical guidance and support to other team members on signal processing-related issues., • Conduct research and feasibility studies to explore new signal processing techniques and applications., • Perform simulation and modeling of signal processing systems using specialized software tools., • Mentor junior-level engineering staff members.Required Specialized Skills/Knowledge, • Technical experience with:, • Digital communications and RF systems experience, including modem and link margin analysis, • Hardware and FPGA development experience (VHDL or Verilog), • Digital filter techniques, Fourier Analysis, and tracking loops, • RF circuit design (cascades, mixing, amplifiers, filtering, oscillators, etc.), • Nonlinear circuits, measurements, and simulation techniques, • Experience with relevant software tools, including:, • MATLAB/Simulink, plus DSP Systems Toolbox (required), • MathWorks HDL Coder, • Mentor Graphics ModelSim, • LabVIEW, • TI Code Composer Studio, • Xilinx Vivado and Intel Quartus Prime, • Experience using signal generators, network analyzers, spectrum analyzers, and logic analyzers, • Knowledge of common wireless standards and techniques, • Technical project leadership skills, • Strong verbal and written communication skillsEducation and Experience, • Ideal candidates will have a Ph.D. (or be in candidacy) in Communications and Signal Processing, • MS. in Digital Signal Processing (minimum requirement), • 5+ years of experience in digital signal processing design (or related academic research)Other Requirements, • Training and regular duties require a regular in-office presence. Hybrid/flexible scheduling is available based on business needs., • Although minimal, some circumstances may require a weekly commitment above 40 hours or hours outside of regular business hours., • Minimal travel may be required for client visits and tradeshows., • Please note that all offers for hire are contingent on passing e-verification and background and drug screenings. In addition, you must be able to work with ITAR and CUI data.Physical Requirements, • Prolonged periods sitting at a desk and working on a computer, • Be able to perform low to moderately strenuous physical activities requiring standing, walking, and reaching. The position is eligible for a variety of bonuses, including client referrals, employee referrals, publications, and extra effort. Relocation assistance of up to $15,000 may be available for well-qualified candidates. Due to contractual requirements, if hired you will be required to pass both a background and drug screening.

Job DescriptionSenior Specialist, Electrical Engineer – FPGA (Rochester, NY) Employment Type: Full-time Location: Rochester, New York Schedule: 9/80 work schedule (every other Friday off) Relocation: Available Northwest Talent Solutions is partnering with an aerospace and defense technology organization developing next-generation tactical communications systems. We are seeking a signal-processing focused FPGA Design & Verification Engineer to support the development of modem and radio communication products. This is a hands-on role within a cross-functional engineering team responsible for designing, verifying, and testing FPGA firmware supporting embedded communications hardware. What You'll Do: * Architect FPGA processing solutions from system requirements * Design and implement firmware using VHDL/Verilog RTL development * Develop verification environments and self-checking test benches using SystemVerilog * Implement and verify modem and digital signal processing (DSP) algorithms * Integrate FPGA firmware onto hardware platforms * Create FPGA specifications, development plans, and verification plans * Perform requirements analysis, trade studies, and design reviews * Support lab testing, validation, and troubleshooting * Collaborate with systems, software, and hardware engineers * Present technical status and documentation to engineering teams and stakeholders Required Qualifications: * Bachelor's degree in Electrical Engineering or related technical field (or equivalent experience) * 7+ years of relevant FPGA or embedded digital design experience * Experience with FPGA/ASIC development using VHDL or Verilog * Experience with FPGA verification using SystemVerilog * Experience integrating FPGA firmware on hardware * Experience using FPGA vendor tools (Xilinx Vivado, Intel Quartus, or similar) * Experience working in a Linux development environment * Ability to obtain a U.S. security clearance Preferred Experience: * Digital signal processing (DSP) or modem/waveform implementations * Communications or RF system development * MATLAB or Simulink modeling * Python or TCL scripting * Universal Verification Methodology (UVM) * FPGA verification tools (Questa or similar) * Source control tools (Git/SVN) Ideal Background: Candidates who have worked on embedded communications systems, radio products, or defense-related signal processing platforms will be especially relevant. Experience implementing algorithms in programmable logic and verifying performance against system requirements is highly valued. Screening Question: * Are you eligible to obtain a U.S. security clearance? Northwest Talent Solutions and our client are equal opportunity employers. All qualified applicants will be considered for employment without regard to any protected characteristic under applicable law.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Product Engineer to join our team! This individual will be responsible for launching a new product such as stand-alone sheet metal components and up to complex electro-mechanical assemblies from documentation control/management through shipping. Key Responsibilities: • Responsible for selecting processes and assisting with cost estimates for new products and tools., • Responsible for Floor Engineering Tech support for his or her part portfolio or customer base., • Effectively utilize Lean Principles when engineering the manufacturing processes., • Develops and documents machine processes and manual processes appropriate for the materials used to manufacture new and existing Customer products., • Aware of new and existing products based upon the total production cost during the product launch and through life of the product., • Serves as technical expert for the Proview Team (Prototype), • Serves as technical expert for the NORP (New Order Review Process) Team for launching new product into Production., • Will assist Technical Sales Engineer for specific programs., • Responsible for assisting and reviewing complex cost estimates., • Responsible for product quality and process safety. Interfaces with Quality to determine effective Quality Plans and if necessary implement NCMR root cause and corrective action closure., • Manages Continuous Improvement Projects., • May be asked to mentor other Manufacturing and Tool Design Engineers and oversee cross-functional project teams ensuring cost and price profitability to drive cost up front. Qualifications:, • 5-10 years related experience or training, • Associates degree (A.S.), • Bachelors degree (B.S.) preferred Industrial/Manufacturing or Mechanical Engineering or equivalent combination of education and experience. Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Word, Microsoft Excel, Microsoft PowerPoint, Microsoft Project, Internet Explorer, Auto-CAD, strong 3D modeling (SolidWorks). * Other Requirements: Familiar with the sheet-metal industry, including fabrication and hard tooling for stamping, forming and welding of steel, stainless, aluminum as well as other metals. Familiar with DFM/DFA principals to reduce costs. Strong GD&T skill set. Familiar with assembly techniques. Tool-making or tool-engineering experience a plus. Ability to present a positive ownership attitude towards work responsibilities. Mental and visual attention with concentration on detail. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Electrical Engineer (RF) ( Rochester, NY ) - 32847. As a member of the Product Support Engineering team you will be tasked with investigating a variety of problems including RF/Analog, digital, assembly, SMT and test related. Ability to design and conduct engineering experiments and act upon test re

Join our mission-critical team as a Reliability Engineer, ensuring the success of cutting-edge Ground, Space, and Airborne Systems. Job Title: Lead, Reliability Systems Engineer - Team Lead.

Job Title: Lead, Reliability Systems Engineer - Team Lead. Join our mission-critical team as a Reliability Engineer, ensuring the success of cutting-edge Ground, Space, and Airborne Systems.

Call Center / Remote] - Anywhere in U.Competitive pay / Medical, dental & vision / 401k / PTO - As a Customer Service Rep at Planet Home Lending, you will: Respond to borrower inbound calls concerning their account, ensuring high quality service and adhering to productivity and regulatory requiremen