Formula jobs in Mollet Del VallésCreate job alerts

At BOLD, we design and build the next generation of high-performance battery systems for the world’s most demanding industries — from Formula 1 and hypercars to aerospace, marine and defense. Our mission: to deliver energy systems where every millisecond and every degree matter. Inscríbase (haciendo clic en el botón correspondiente) después de revisar toda la información relacionada con el trabajo a continuación. What You’ll DoIndustrialisation & Production Lines • Define the technical concept of battery pack production lines, from prototype builds to niche-volume production., • Develop and optimise manufacturing processes for assembly, welding, and end-of-line (EOL) testing., • Ensure production solutions meet quality, safety, scalability, and manufacturability requirements., • Support the definition of plant layouts, production flows, and manufacturing concepts., • Provide technical support during equipment commissioning, process validation, and production ramp-up.Engineering & Product Design Collaboration, • Collaborate closely with engineering teams to ensure product designs are optimised for manufacturability., • Recommend design improvements to enhance production efficiency, product quality, and cost-effectiveness., • Align product requirements with manufacturing capabilities and process constraints., • Support the definition of fixtures, tooling, and material handling solutions., • Identify and mitigate industrialisation risks during the early stages of product development.Supplier & Automation Management, • Coordinate with equipment suppliers and automation integrators throughout project execution., • Define technical requirements and specifications for manufacturing equipment and automation systems., • Provide technical support during equipment manufacturing, installation, commissioning, and validation., • Ensure the successful integration of automated and semi-automated production systems., • Review and validate technical solutions from both manufacturing and quality perspectives.Quality, Process & Continuous Improvement, • Ensure manufacturing processes comply with applicable quality standards, including IATF 16949 or equivalent., • Support the implementation of quality control, traceability, and process monitoring systems., • Contribute to the definition of control plans, process validation, and production readiness activities., • Drive continuous improvement initiatives to enhance process efficiency, reliability, and repeatability., • Investigate and resolve manufacturing and process-related technical issues to support stable production.Requisitos mínimosWhat You Bring, • 5+ years of experience as a Process Engineer, Manufacturing Engineer, or in a similar role within an industrial manufacturing environment., • Bachelor’s or Master’s degree in Industrial, Mechanical, Electronic, Automotive Engineering, or a related discipline., • Hands‑on experience with battery pack manufacturing processes, from prototype builds to low‑/medium‑volume production., • Strong knowledge of assembly, welding, and end‑of‑line (EOL) testing processes., • Experience specifying and implementing industrial automation systems and production equipment., • Expertise in the design and validation of tooling, fixtures, and material handling systems., • Solid understanding of industrial quality systems, process validation, and manufacturing in regulated environments., • Knowledge of IATF 16949 quality standards (preferred) and ISO 9001., • Black Level certification (Second Intervention Team – Emergency Response)., • Red Level certification (High‑voltage battery handling and electrical safety training).Why Join BOLD, • High-growth, multicultural environment: Be part of a fast-scaling company driving innovation in advanced electrification., • Competitive Compensations, • Life Insurance, • Private health insurance - Reduced cost for employees and family., • Subsidised canteen, • Flexible work schedule and up to 5 remote days/month., • Monthly Town HallAbout BOLD At Bold, we’re a diverse, international team with backgrounds in automotive, motorsport, aerospace, defense and aviation. We combine creativity and engineering rigour to deliver high-performance, safe and sustainable energy systems for the world’s most demanding applications. We Operate Through Two Divisions • BOLD Applied Engineering (BAE )– Provides top-tier professional engineering services, primarily to elite motorsport teams (especially Formula 1), in areas such as composite design, mechanical engineering, aerodynamics and systems integration. This expertise is transferred directly to complex defence sector programmes., • BOLD Technology (BT) – Designs, develops and manufactures high‑voltage battery systems and electric propulsion system components for defence applications, tactical vehicles, military platforms, aviation and advanced mobility. BOLD is an international benchmark in defence electrification, supplying systems to United States Army programmes and collaborating with leading defence primes in the US and Europe.Inclusion & Diversity BOLD is an equal opportunity employer. We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. xcskxlj Privacy Policy BOLD respects your privacy and is committed to protecting the personal information you share with us, please refer to Bold’s Privacy Policy for more details. #J-18808-Ljbffr

BOLD is committed to shaping the future of high-performance mobility from Formula 1 to aviation and marine. In our mission to deliver innovative and impactful products in the mobility sector, we are growing our team while facing exciting engineering and manufacturing challenges alongside our clients. Por favor, asegúrese de leer completamente el resumen y los requisitos de esta oportunidad de empleo que se detallan a continuación. What You'll Do • Perform stress analysis and verification using commercial software and hand calculations., • Support design teams by providing simulation feedback to ensure structural requirements are met., • Contribute to the preparation of reports and documentation of simulation results. What You Bring • Engineering student (Mechanical, Aerospace, Automotive, or similar), ideally in the final years of studies., • Interest in simulation, modeling, and structural analysis., • Valuable: experience with FEA software, such as Simcenter 3D., • Valuable: experience in coding (MATLAB or Python)., • Valuable: knowledge of stress and strain principles, especially in composites., • Proactive, analytical mindset, attention to detail, and eagerness to learn and contribute., • Fluent in English What We Offer • Internship in a highly specialized, engineering-driven environment., • Opportunity to work alongside experienced professionals in cutting‑edge projects., • Hands‑on learning experience in simulation and structural analysis applied to real‑world products., • Exposure to high‑performance sectors such as motorsport and advanced mobility., • Development opportunities within BOLD. Inclusion & Diversity BOLD is an equal opportunity employer. xcskxlj We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. #J-18808-Ljbffr

At BOLD, we design and build the next generation of high‑performance battery systems for the world’s most demanding industries — from Formula 1 and hypercars to aerospace, marine and defense. Our mission is to deliver energy systems where every millisecond and every degree matter. ¿Posee las habilidades y la experiencia adecuadas para este puesto? Siga leyendo para descubrirlo y envíe su solicitud. Responsibilities Project Execution & Delivery • Oversee project-level delivery within the agreed budget and timeline. Define project scope, milestones, and deliverables in collaboration with the Technical Project Leader (TPL) and Operations Leader (OL)., • Continuously monitor project progress, ensuring alignment with objectives and reporting status updates., • Identify potential risks and define mitigation strategies, working closely with the Technical Project Leader. Stakeholder & Supplier Coordination • Act as the primary point of contact for the customer, ensuring smooth data exchange and alignment throughout the project lifecycle., • Coordinate across functional departments, customers, and external suppliers to guarantee efficient implementation and verification of deliverables., • Support supplier selection based on inputs from the Technical Project Leader and Component Engineer. Resource & Budget Management • Define resource needs and align them with the Development Manager to optimize team efficiency., • Maintain accountability for project budgets, tracking expenditures and ensuring cost‑effectiveness., • Implement risk management strategies, proactively addressing challenges before they impact project success. Qualifications • Degree in Mechanical Engineering or equivalent experience in R&D and product development environments., • Minimum of 5 years of experience in a similar Program Management or Project Management role., • Experience working in medium‑sized, dynamic engineering or industrial companies., • Comfortable operating in environments with medium‑to‑high uncertainty and evolving structures., • Experience managing technically complex and customized projects rather than purely standardized products., • Proficient in English. Desirable Skills • Experience within EV, battery systems or electrification environments., • Exposure to high‑performance engineering sectors such as motorsport, advanced mobility or complex industrial programs., • Experience working in fast‑scaling or rapidly evolving organizations. Benefits • High‑growth, multicultural environment., • Competitive compensation., • Life insurance., • Private health insurance – reduced cost for employees and family., • Subsidised canteen., • Flexible work schedule and up to 5 remote days/month., • Monthly Town Hall. BOLD is an equal‑opportunity employer. xcskxlj We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. #J-18808-Ljbffr

At BOLD, we design and build the next generation of high-performance battery systems for the world’s most demanding industries — from Formula 1 and hypercars to aerospace, marine and defense. Our mission: to deliver energy systems where every millisecond and every degree matter. ¿Listo para inscribirse? Antes de hacerlo, asegúrese de leer todos los detalles pertenecientes a este trabajo en la descripción a continuación. As a Senior Composite Design Engineer - F1, you will play a key role in the design and development of composites laminates, and structures. You should possess an understanding of the materials and processes utilized in high-end composite structures applications (Prepreg, cores, tooling, and trimming methodologies). What You Will Do • Analysis and verification of initial specifications. Statements of works – Drawing and layup table specification, • Experienced in design and developing of composites laminates and structures. Full understanding of material and processes used in high end applications composites structures (Prepreg, cores, mouldings and trimming methodologies), • Experience in the design and manufacturing process of composites tooling, patterns and CFRP moulds for autoclave and OoA processes, • Experience designing of composites components and tooling using CATIA V5 or Siemens NX., • Good work practice of surfaces and solids., • Broad understanding of CATIA/NX functions and the structuring of Generator files, publications and save management structure for large master product files, • Excellent understanding or parametric modelling and stable tree structures required to support agile geometry development, • Experience in drafting of drawings using CATIA V5 (V6)/Siemens NX for composites component, tooling, jigs, and fixtures to support manufacturing requirements. Understanding of the applications of GD&T and process limitations of composites materials when tolerancing and defining geometries, • Excellent time management and leadership skills, able to support Jr designers with technical queries in both materials and CATIA/NX structures for parametric modelling, • Able to work to a project plan and manage technical requirements vs workload to a schedule, maintain active communication in an agile environment of adherence to project plans and set targets. Leveraging on cloud base collaborative platforms such as MS Office suite and Cloud project management tools, • Maintain an up-to‑date technical awareness of the business requirements, • Work closely with the technical leads and Project management office to coordinate and effectively plan and program the designs to ensure the assembly team have enough time to meet key dates and deadlines Minimum Requirements What You Bring • +5 years of experience working as a Composite Design Engineer, • EV/Motorsport industry experience, • Mechanical Engineering Degree or equivalent R&D design experience, • Excellent knowledge and experience of Catia v5/3DX and/or Siemens NX, • Structural Design experience, • In‑depth knowledge of composite manufacturing processes, especially for prepreg components, including tooling, inserts, cores, and all associated processes, • Proficient English Desirable Skills • FEA and/or CFD experience, • Vast knowledge of materials used in motorsport and aerospace applications (metallic alloys/technical polymers/composites) Why Join BOLD • High‑growth, multicultural environment: Be part of a fast‑scaling company driving innovation in advanced electrification., • Competitive Compensations, • Life Insurance, • Private health insurance - Reduced cost for employees and family., • Subsidised canteen, • Flexible work schedule and up to 5 remote days/month., • Monthly Town Hall About BOLD At Bold, we’re a diverse, international team with backgrounds in automotive, motorsport, aerospace, defense and aviation. We combine creativity and engineering rigour to deliver high‑performance, safe and sustainable energy systems for the world’s most demanding applications. We Operate Through Two Divisions • BOLD Applied Engineering (BAE )– Provides top‑tier professional engineering services, primarily to elite motorsport teams (especially Formula 1), in areas such as composite design, mechanical engineering, aerodynamics and systems integration. This expertise is transferred directly to complex defence sector programmes., • BOLD Technology (BT) – Designs, develops and manufactures high‑voltage battery systems and electric propulsion system components for defence applications, tactical vehicles, military platforms, aviation and advanced mobility. BOLD is an international benchmark in defence electrification, supplying systems to United States Army programmes and collaborating with leading defence primes in the US and Europe. Inclusion & Diversity BOLD is an equal opportunity employer. We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. xcskxlj Privacy Policy BOLD respects your privacy and is committed to protecting the personal information you share with us, please refer to Bold’s Privacy Policy for more details. #J-18808-Ljbffr

BOLD is committed to shaping the future of high-performance mobility from Formula 1 to aviation and marine. In our mission to deliver innovative and impactful products in the mobility sector, we are building the company whilst working with clients in exciting engineering and manufacturing challenges. ¿Tiene su CV preparado? Si es así y confía en que este es el puesto ideal para usted, asegúrese de enviar su solicitud lo antes posible. The Technical Buyer will be responsible for driving and developing all activities related to the procurement of components for our battery and electrification technologies, with a focus on electrical/electronic components (PCBA, HV Electrical distribution). About Bold Valuable Tech: Our Vision At Bold, we´re a diverse community, from all over the world and from multiple industries and backgrounds. Combining experience from Automotive, Motorsport, Aerospace and Aviation with skills from concept phase through to full product delivery. Our rapid expansion is a testament to our commitment to pushing boundaries and delivering cutting‑edge solutions. We have two engineering divisions, different in their technologies but similarly focused on delivering compelling products to our customers. In our Applied Engineering division, we are an integral part of the design & development process for our high‑performance customers including Formula 1, Motorsport and Automotive. From the initial stages of blank sheet designs to the final production, we assume ownership with a relentless commitment to bringing our clients' visions to life. We contribute across all areas of engineering and in multiple different specialisms including composite & materials, bodywork, aero & structural, powertrain, and tooling. In our Technology division, we specialize in R&D of state of the art of battery systems. Taking projects from initial concepts to production: we are designing, developing, testing, and manufacturing the next generation of high‑performance batteries to innovative projects for multiple industries. We aim to generate a real impact on the future of electric mobility. Responsibilities • Manage all purchases, both direct and indirect: electronic components, props, industrial products, work materials, supplies and other products or services., • Logistics and transport: negotiate with logistics providers for the distribution of products., • Support in negotiating contracts, prices and terms with suppliers., • Ensure that products and materials purchased comply with technical and quality specifications., • Collaborate with the engineering and production teams to ensure that purchased products meet technical requirements., • Work on cost saving initiatives and search for alternative suppliers., • Identify and evaluate new strategic suppliers for key raw materials., • Develop and maintain long‑term relationships with suppliers., • Continuous assessment of suppliers' capabilities, risks and performance to ensure continuity of supply., • Standardisation of processes and documents., • Create and manage the RFI/RFP/RFQ process. Compensation And Benefits • Competitive compensation., • Flexible compensation, which includes Health insurance and Kindergarten., • Dining room & subsidized catering., • Flexible Work Schedule. BOLD is an equal opportunity company. We believe in a merit and competence culture where the best ideas thrive regardless of age, disability, race, religion, or belief, gender, sexual orientation, marital status or family circumstances. Bold respects your privacy and is committed to protecting the personal information you share with us, please refer to Bold’s Privacy Policy for more details. Minimum Requirements • Advanced university degree in Engineering or Finance., • 5 years of experience in procurement of industrial components and materials (automotive, electronics, plastic parts and structural metals, PCBA, high voltage electrical distribution)., • Extensive user level experience in ERP systems, preferably Odoo., • Extensive experience in negotiation with suppliers., • In‑depth knowledge of local national and European markets., • Experience in implementing improvements and standardisation of Supply Chain processes. xcskxlj, • Previous experience in battery technology with a wide range of trading groups and both low and high value commodities (direct and indirect). #J-18808-Ljbffr

Join BOLD and bring your Formula Student journey to life in cutting‑edge projects. We're on the lookout for passionate Formula Student graduates who are ready to put their engineering skills to work on real projects in Formula 1, motorsport, aerospace, automotive, and electrification. Our Formula Student Graduate Program is tailored to give you the best possible start to your career. Whether you're passionate about composite design, battery systems, embedded software or mechanical engineering — this is your opportunity to contribute to cutting‑edge projects and accelerate your development in one of the most dynamic engineering environments in Europe. At BOLD, we combine expertise from automotive, aerospace, motorsport and aviation, with a shared vision of delivering bold, innovative, high‑performance solutions to our clients. Our team is diverse, international, and driven by purpose. We work fast, challenge the norm, and deliver with passion. • Applied Engineering: Full‑cycle product design and development for Formula 1, motorsport and high‑performance automotive., • Electrification: R&D and industrialisation of high‑end battery systems, from concept to series production. All our roles are based at our HQ in Barcelona, and we welcome talent from all over the world. At BOLD, we don’t just hire junior engineers — we empower future leaders in engineering. From day one, you’ll work alongside senior professionals on live projects for top‑tier clients. You’ll have real responsibility, real impact, and the opportunity to develop your skills in a collaborative, high‑performance environment. • A fast‑track to becoming a world‑class engineer in motorsport, Formula 1, and aerospace., • Daily exposure to multidisciplinary teams and hands‑on experience from concept to product., • Access to our two core divisions:, • Applied Engineering: focused on end‑to‑end product development for high‑performance vehicles., • Electrification: specialised in the design and development of high‑performance battery systems., • The chance to be part of an international, talented team working with leading clients across Europe., • Clear growth opportunities and mentorship from experts in your area., • An inspiring workplace in Barcelona, one of Europe’s top innovation hubs., • At least two seasons of Formula Student experience., • Team leader or head of department experience is desirable., • Participation in scrutineering, design, cost, or business plan events is a plus., • A strong passion for motorsport and having genuinely enjoyed the Formula Student experience., • Demonstrable contribution to the project — whether through hands‑on manufacturing, technical development, or software application., • Mechanical Design Engineer – Concept, 3D/2D design, DFM using CAD tools., • Composite Design Engineer – Composite part development from concept to manufacturing., • Aero Surface Design Engineer – Translate CFD input into complex surface models., • Hardware Engineer – Circuit simulation, Altium PCB design, harnesses, testing setups., • Embedded Software Engineer – C/C++ programming, Simulink, SIL/HIL testing., • Battery Systems Engineer – Battery design, cooling strategies, BMS integration., • FEA Engineer – Static/dynamic simulation, CAE with isotropic/orthotropic materials. #J-18808-Ljbffr

BOLD is committed to shaping the future of high-performance mobility from Formula 1 to aviation and marine. In our mission to deliver innovative and impactful products in the mobility sector, we are growing our team while facing exciting engineering and manufacturing challenges alongside our clients. Por favor, asegúrese de leer completamente el resumen y los requisitos de esta oportunidad de empleo que se detallan a continuación. What You'll Do • Perform stress analysis and verification using commercial software and hand calculations., • Support design teams by providing simulation feedback to ensure structural requirements are met., • Contribute to the preparation of reports and documentation of simulation results. What You Bring • Engineering student (Mechanical, Aerospace, Automotive, or similar), ideally in the final years of studies., • Interest in simulation, modeling, and structural analysis., • Valuable: experience with FEA software, such as Simcenter 3D., • Valuable: experience in coding (MATLAB or Python)., • Valuable: knowledge of stress and strain principles, especially in composites., • Proactive, analytical mindset, attention to detail, and eagerness to learn and contribute., • Fluent in English What We Offer • Internship in a highly specialized, engineering-driven environment., • Opportunity to work alongside experienced professionals in cutting‑edge projects., • Hands‑on learning experience in simulation and structural analysis applied to real‑world products., • Exposure to high‑performance sectors such as motorsport and advanced mobility., • Development opportunities within BOLD. Inclusion & Diversity BOLD is an equal opportunity employer. xcskxlj We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. #J-18808-Ljbffr

At BOLD, we design and build the next generation of high-performance battery systems for the world’s most demanding industries — from Formula 1 and hypercars to aerospace, marine and defense. Our mission: to deliver energy systems where every millisecond and every degree matter. As a Senior Test Engineer, you will play a key role in validating the performance, safety and reliability of our high‑voltage battery systems. You’ll design and execute advanced test plans, analyze data, and collaborate with cross‑functional teams to turn engineering concepts into proven, high‑performing energy solutions. Asegúrese de enviar su solicitud rápidamente para maximizar sus posibilidades de ser considerado para una entrevista. Lea la descripción completa del puesto a continuación. What You’ll Do • Plan, execute and analyze validation tests to ensure our high‑voltage battery systems meet the highest standards of performance, safety and reliability., • Develop and maintain Design Verification Plans (DVPs), linking system requirements to test activities and ensuring complete coverage throughout the validation process., • Set up and operate test benches and measurement systems — including battery cyclers, climatic chambers, vibration and shock rigs, EMC and abuse test setups., • Use tools like CANalyzer, CANoe, PCAN Explorer, Python, Concerto or vSignalyzer to collect, process and interpret test data., • Collaborate with design, systems, hardware and software engineers to identify issues, propose solutions and verify design improvements., • Apply and adapt testing standards and safety regulations from automotive, motorsport, aerospace and defense industries., • Contribute to continuous improvement by refining test methodologies, introducing automation or data management tools, and supporting the development of new test infrastructure., • Act as a technical reference within the Testing team, guiding and supporting junior engineers in developing their testing skills and ensuring consistent, high‑quality validation practices. What You Bring Education & Experience • Bachelor’s or Master’s degree in Industrial, Electrical/Electronic or Mechanical Engineering, or equivalent experience., • 5+ years in testing or validation of HV systems, ideally in automotive, motorsport or aerospace., • Experience with vibration and shock testing, accelerometers and data acquisition systems. Technical Skills • Experience in test planning, DVP creation and validation of HV battery systems or similar., • Proficiency with CAN tools (CANalyzer, CANoe, PCAN) and data analysis (Python, Concerto, vSignalyzer)., • Hands‑on use of HV test equipment: battery cyclers, climatic chambers, vibration, EMC, abuse testing., • Knowledge of testing standards (ISO 26262, UN 38.3, ECE R100 or equivalent)., • Familiarity with automation, data management and continuous improvement in testing processes. Languages • Advanced proficiency in English and Spanish (spoken and written). Why Join BOLD • High‑growth, multicultural environment: be part of a fast‑scaling company driving innovation in advanced electrification., • Flexible compensation: private health insurance with reduced cost for employees and family; subsidised canteen., • Flexible work schedule and up to 5 remote days per month., • Monthly Town Hall. BOLD is an equal‑opportunity employer. xcskxlj We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. #J-18808-Ljbffr

Join BOLD and bring your Formula Student journey to life in cutting‑edge projects. Inscríbase rápido, consulte la descripción completa desplazándose hacia abajo para conocer todos los requisitos de este puesto. We're on the lookout for passionate Formula Student graduates who are ready to put their engineering skills to work on real projects in Formula 1, motorsport, aerospace, automotive, and electrification. Our Formula Student Graduate Program is tailored to give you the best possible start to your career. Whether you're passionate about composite design, battery systems, embedded software or mechanical engineering — this is your opportunity to contribute to cutting‑edge projects and accelerate your development in one of the most dynamic engineering environments in Europe. About Bold At BOLD, we combine expertise from automotive, aerospace, motorsport and aviation, with a shared vision of delivering bold, innovative, high‑performance solutions to our clients. Our team is diverse, international, and driven by purpose. We work fast, challenge the norm, and deliver with passion. Our Two Engineering Divisions • Applied Engineering: Full‑cycle product design and development for Formula 1, motorsport and high‑performance automotive., • Electrification: R&D and industrialisation of high‑end battery systems, from concept to series production. All our roles are based at our HQ in Barcelona, and we welcome talent from all over the world. WHAT CAN BOLD OFFER YOU? At BOLD, we don’t just hire junior engineers — we empower future leaders in engineering. From day one, you’ll work alongside senior professionals on live projects for top‑tier clients. You’ll have real responsibility, real impact, and the opportunity to develop your skills in a collaborative, high‑performance environment. We Offer You • A fast‑track to becoming a world‑class engineer in motorsport, Formula 1, and aerospace., • Daily exposure to multidisciplinary teams and hands‑on experience from concept to product., • Access to our two core divisions:, • Applied Engineering: focused on end‑to‑end product development for high‑performance vehicles., • Electrification: specialised in the design and development of high‑performance battery systems., • The chance to be part of an international, talented team working with leading clients across Europe., • Clear growth opportunities and mentorship from experts in your area., • An inspiring workplace in Barcelona, one of Europe’s top innovation hubs. Minimum Requirements • At least two seasons of Formula Student experience., • Team leader or head of department experience is desirable., • Participation in scrutineering, design, cost, or business plan events is a plus., • A strong passion for motorsport and having genuinely enjoyed the Formula Student experience., • Demonstrable contribution to the project — whether through hands‑on manufacturing, technical development, or software application. Possible Roles For Formula Student • Mechanical Design Engineer – Concept, 3D/2D design, DFM using CAD tools., • Composite Design Engineer – Composite part development from concept to manufacturing., • Aero Surface Design Engineer – Translate CFD input into complex surface models., • Hardware Engineer – Circuit simulation, Altium PCB design, harnesses, testing setups., • Embedded Software Engineer – C/C++ programming, Simulink, SIL/HIL testing., • Battery Systems Engineer – Battery design, cooling strategies, BMS integration. xcskxlj, • FEA Engineer – Static/dynamic simulation, CAE with isotropic/orthotropic materials. #J-18808-Ljbffr

BOLD is committed to shaping the future of high-performance mobility from Formula 1 to defense, aviation and marine. In our mission to deliver innovative and impactful products in the mobility sector, we are building the company whilst working with clients in exciting engineering and manufacturing challenges. Todos los posibles candidatos deben leer con atención los siguientes detalles de este trabajo antes de presentar una candidatura. We are a leading company in advanced technology and engineering, operating through two highly complementary divisions and delivering critical solutions for mission-essential applications. BT – BOLD Technologies Designs, develops and manufactures high-voltage battery systems and electric propulsion system components for defence applications, tactical vehicles, military platforms, aviation and advanced mobility. BOLD is an international benchmark in defence electrification, supplying systems to United States Army programmes and collaborating with leading defence primes in the US and Europe. BAE – BOLD Applied Engineering Provides top-tier professional engineering services, primarily to elite motorsport teams (especially Formula 1), in areas such as composite design, mechanical engineering, aerodynamics and systems integration. This expertise is transferred directly to complex defence sector programmes. Together, BT and BAE allow BOLD to offer a unique blend of technology, engineering services, and execution capability to elite customers operating at the highest levels of performance. The systems engineer is responsible for contributing to the design and development of battery systems by supporting requirement definition, verification planning, and system-level coordination across teams. This role ensures technical consistency in line with BOLD’s commitment to deliver high-performance, safe and reliable battery solutions. Key Responsibilities • Requirement Support & Documentation, • Assist in capturing and documenting system-level requirements., • Participate in the review and traceability of technical specifications., • Use requirements management tools to ensure clarity and structure., • Support in the alignment between customer and internal specifications., • System Design Contribution, • Support battery system architecture design (cell/module selection, cooling, BMS integration)., • Participate in interface definition with hardware, software and mechanical teams., • Contribute to system-level diagrams and documentation., • Perform calculations or simulations to support design decisions., • Testing & Validation Support, • Assist in the definition of validation plans and test cases., • Support testing campaigns: preparation, execution and analysis., • Participate in test reviews and data reporting., • Help monitor performance metrics during testing., • Cross-functional Collaboration, • Work closely with design, hardware and software engineers., • Contribute to project reviews and design meetings., • Escalate risks or deviations detected during development., • Learn and apply best practices in systems engineering.Compensation and Benefits, • Competitive compensation, • Flexible compensation, • Dining room & subsidized catering, • Flexible work schedule (5 days month remote work), • Regular events and team building activitiesEqual Opportunity Statement BOLD is an equal opportunity company. We believe in a merit and competence culture where the best ideas thrive regardless of age, disability, race, religion, or belief, gender, sexual orientation, marital status or family circumstances. Bold respects your privacy and is committed to protecting the personal information you share with us, please refer to Bold’s Privacy Policy for more details. Minimum Requirements • Experience and Expertise, • 3+ years of experience as a systems engineer or technical project leader for complex, safety-critical systems, particularly those involving electrical, electronic, software, and mechanical components., • Proven experience in high-voltage battery system development, including safety analysis, design, and validation., • Technical Skills, • Expertise in requirements-based engineering processes and the use of requirements management tools (Polarion, JAMA, DOORS, or similar)., • Experience with development-related analysis methods (FMEA, FTA, V-model) and system safety techniques., • Proficiency in system simulation and modeling tools, such as MATLAB/Simulink, and familiarity with programming languages like C++, Python, or equivalent., • Leadership and Communication, • Strong leadership skills with the ability to guide and mentor within cross-functional engineering teams., • Excellent communication skills, both verbal and written, with the ability to present complex technical information to stakeholders at all levels., • Fluent in English, with the ability to collaborate effectively with global teams., • Desirable Skills and Additional Experience, • Advanced experience in the design, development, and validation of high-voltage battery systems for automotive, aerospace, or industrial applications., • Expertise in the use of simulation tools and software development for battery management systems (BMS) and other safety-critical components. xcskxlj, • Knowledge of certification processes and standards for battery systems, including safety, environmental, and transportation regulations. #J-18808-Ljbffr

BOLD is committed to shaping the future of high-performance mobility from Formula 1 to aviation and marine. In our mission to deliver innovative and impactful products in the mobility sector, we are building the company whilst working with clients in exciting engineering and manufacturing challenges. Siga leyendo para comprender completamente lo que este trabajo requiere en cuanto a habilidades y experiencia. Si su perfil encaja, presente su candidatura. As a Supplier Quality Engineer, you will liaise with all our current and future suppliers. You will validate any new parts or suppliers against production and customer requirements as well as our quality standards. You will manage supplier nonconformities based on root cause analysis in order to avoid recurrence. Responsibilities • Evaluate and validate new suppliers to be part of BOLD's supplier panel., • Analyze and evaluate special customer-relevant quality requirements., • Provide input and liaise with suppliers during the RFI and RFQ stages of the acquisition phase., • Analyze and implement requirements for purchased parts in new developments and technical changes., • Manage supplier PPAP and purchased part related APQP., • Supplier Quality Management from acquisition phase to SOP and during production., • Perform Supplier audits and assist engineering and procurement teams from the quality point of view., • Product and process validation for new components at supplier site -, • Initiate and follow through to completion any supplier NCR., • Travel up to 60% to suppliers (mainly in Spain).Minimum qualifications, skills and experience, • 5+ years of experience as Supplier Quality Engineer., • Bachelor's degree (or higher) in Electric, Electronic or Industrial Engineering, or equivalent professional work experience., • Experience with Automotive and/or Aerospace standards at production level with IATF16949, AS9100 certification., • Deep knowledge and experience in the use of core tools (problem solving, APQP, PPAP, FMEA, 8D, etc.)., • Driver's license and own vehicle.Desirable skills and additional experience, • Expertise in electric and/or electronic components., • Experience with battery packs., • Understanding the testing requirements and validating battery products at a high level., • Auditor VDA 6.3.Compensation and benefits, • Competitive compensation., • Flexible compensation, • Health insurance., • Kindergarten., • Regular events and team building activities. BOLD is an equal opportunity company. xcskxlj We believe in a merit and competence culture where the best ideas thrive regardless of age, disability, race, religion, or belief, gender, sexual orientation, marital status, or family circumstances. #J-18808-Ljbffr

At BOLD, we design and build the next generation of high-performance battery systems for the world’s most demanding industries — from Formula 1 and hypercars to aerospace, marine and defense. Our mission: to deliver energy systems where every millisecond and every degree matter. Inscríbase rápido, consulte la descripción completa desplazándose hacia abajo para conocer todos los requisitos de este puesto. We are looking for Experienced Business Manager - Engineering Services, Spanish Defence Sector for key strategic role within BOLD. The company is entering and expanding within the Spanish defence sector, and this position offers the opportunity to work on a blank canvas, building relationships, positioning and business opportunities from the ground up, with long-term, sustainable impact and value. The role is responsible for managing and developing commercial relationships with defence sector clients, with a particular focus on Spain, operating transversally across BOLD Technologies and BOLD Applied Engineering. The position reports to the Chief Commercial Officer (CCO) and works closely with the CEO, directly influencing BOLD’s strategy, growth and positioning within the national and international defence ecosystem. What You’ll Do • Lead commercial relationships with defence sector clients, particularly in the Spanish market, • Act as the primary strategic point of contact, working closely with clients to capture technical and commercial needs early and accurately, • Identify, develop and unlock new business opportunities with both existing clients and new sector players, • Actively contribute to building BOLD’s defence presence in Spain, defining approach, priorities and key relationships, • Understand and manage the distinct nature of both divisions, balancing advanced engineering services and technology/product solutions, • Travel frequently, sometimes weekly, to work directly with clients, programmes and key stakeholders, • Support scope definition, proposal preparation and commercial negotiations, • Represent BOLD at defence industry trade shows and events, mainly in Europe and occasionally globally, • Work closely with internal teams to maximise commercial and technical successProfessional Experience, • Strong background in engineering services, vehicle design or systems integration within the defence sector, • Proven experience working with Spanish defence companies, • Extensive network of contacts within the defence sector, both in Spain and internationally, • Ability to operate effectively in complex, highly technical environments with multiple stakeholders, • Professional-level conversational EnglishSoft Skills, • Flexible and adaptable, comfortable in growth-oriented and build-up environments, • Strong active listening skills, with the ability to understand complex needs and propose effective solutions, • High work ethic, proactivity and results-driven mindset, • Ability to build trusted, long-term relationships with internal and external stakeholders, • Strategic mindset with a strong technical and commercial foundationWhy Join BOLD, • High-growth, multicultural environment: Be part of a fast-scaling company driving innovation in advanced electrification., • Competitive Compensations, • Life Insurance, • Private health insurance - Reduced cost for employees and family., • Subsidised canteen, • Flexible work schedule and up to 5 remote days/month., • Monthly Town HallAbout BOLD At Bold, we’re a diverse, international team with backgrounds in automotive, motorsport, aerospace, defense and aviation. We combine creativity and engineering rigour to deliver high-performance, safe and sustainable energy systems for the world’s most demanding applications. We Operate Through Two Divisions • BOLD Applied Engineering (BAE )– Provides top-tier professional engineering services, primarily to elite motorsport teams (especially Formula 1), in areas such as composite design, mechanical engineering, aerodynamics and systems integration. This expertise is transferred directly to complex defence sector programmes., • BOLD Technology (BT) – Designs, develops and manufactures high-voltage battery systems and electric propulsion system components for defence applications, tactical vehicles, military platforms, aviation and advanced mobility. BOLD is an international benchmark in defence electrification, supplying systems to United States Army programmes and collaborating with leading defence primes in the US and Europe. Together, BT and BAE allow BOLD to offer a unique blend of technology, engineering services, and execution capability to elite customers operating at the highest levels of performance. Inclusion & Diversity BOLD is an equal opportunity employer. We foster a culture where ideas thrive based on merit and competence, regardless of age, disability, race, religion, gender, sexual orientation, or family circumstances. xcskxlj Privacy Policy BOLD respects your privacy and is committed to protecting the personal information you share with us, please refer to Bold’s Privacy Policy for more details. #J-18808-Ljbffr