Ingenieria jobs in PamplonaCreate job alerts

As part of our growth, we are looking for a Power Converter Engineer. La siguiente información ofrece un resumen de las habilidades, cualidades y cualificaciones necesarias para este puesto. You will be responsible for performing the following tasks:YOUR TASKS:Act as the main technical focal point for converter suppliers, leading and coordinating all engineering activities related to power converter development and integrationDefine the converter concept, architecture, and detailed technical specifications of power converters for Nordex WTGs ensuring alignment with power electrical system requirementsDevelop converter subassembly designs, specifications, and validation plans, collaborating with suppliers and manufacturers on component qualification and testingCreate and maintain technical documentation related to the main converter, including specifications, manuals, instructions, and certification support documentationSupport and oversee inspections, testing, and validation activities at supplier facilities, as well as in stand-alone and generator-connected test benchesProvide technical support for sourcing and certification activities, including the identification and validation of alternative converter components and support for wind turbine certification processesPerform and enhance hardware design simulations and simulation tools using Matlab-based environments to support converter development and validationYOUR PROFILE:M.Sc. in Electrical Engineering/Power Systems or B.Sc. in Electrical Engineering/Power Systems or similar +3 years in the wind turbine sectorExperience with Matlab is a plusFluent level of English is required (C1 or above) For Spain: foreign qualifications, recognition as the corresponding Spanish degree equivalency is required when applying.YOUR BENEFITSIn addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may vary by locationNordex adheres to a policy of equal employment opportunity. xiphteb All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws.

Cronoshare es una plataforma online para profesionales que quieren encontrar nuevos clientes. Buscamos Arquitecto/a en Pamplona/Iruña y alrededores. Pertenecer a la red de profesionales de Cronoshare no tiene coste y recibirás nuevos clientes según tus preferencias, de forma personalizada. Requisitos: • Conocimientos previos para desarrollar funciones de Arquitecto/a., • Organización, buena relación con el cliente y gestión de tiempo., • Profesionalidad y proactividad. Qué ofrecemos: • Solicitudes de nuevos trabajos y clientes en tu zona, que necesitan Arquitecto/a., • Gestión propia de los clientes y márgenes comerciales., • Sin intermediarios: tú fijas tus tarifas y horarios. ¿Cómo funciona Cronoshare? Gracias a nuestra plataforma de gestión de clientes, podrás aceptar o descartar solicitudes de trabajos en tu área, enviando presupuestos solo a los clientes que más te interesen. No pagarás suscripciones ni tarifas mensuales, además tampoco tienes que abonar comisiones por cada cliente que consigas gracias a nosotros. Para conseguir nuevos clientes, solo tienes que incurrir en una pequeña inversión y podrás acceder a estas solicitudes. Empieza a hacer crecer tu actividad comercial o negocio. Si eres freelance, autónomo o pyme, te esperamos.

Overview You design and tune control algorithms for wind turbines, wind farms, and hybrid plants to ensure safe and efficient operation. You model dynamic system behavior and validate performance against grid codes and mechanical constraints. You develop strategies for power and energy management systems, collaborating with cross-functional teams to enable scalable, reliable energy solutions. This role offers impact in advancing grid compatibility and sustainability. Compensaciones / Beneficios • Hybrid working, • opportunity to contribute to sustainability, • equal employment opportunity policy Responsabilidades, • Design and tune control algorithms for wind turbines, wind farms, and hybrid power plants, • Ensure compliance with international grid codes, electrical models, and mechanical load requirements through control design, • Model and simulate dynamic behavior of power systems, including electrical actuators (DFIG), grid scenarios, and power converters, • Develop and implement control strategies for Power Management Systems (PMS) and Energy Management Systems (EMS) Requisitos principales, • MSc or Ph.D. in Electrical, Power Systems or Control Engineering, • Programming skills in Matlab Simulink and PSCAD, • Required English (C1); German and Spanish desirable, • 1–4 years of relevant experience, • Availability to travel, • Matlab Simulink, • PSCAD, • control design and tuning, • modeling and simulation, • PMS/EMS implementation, • grid codes compliance

Overview You design and tune control algorithms for wind turbines, wind farms, and hybrid plants to ensure safe and efficient operation. You model dynamic system behavior and validate performance against grid codes and mechanical constraints. You develop strategies for power and energy management systems, collaborating with cross-functional teams to enable scalable, reliable energy solutions. This role offers impact in advancing grid compatibility and sustainability. Compensaciones / Beneficios • Hybrid working, • opportunity to contribute to sustainability, • equal employment opportunity policy Responsabilidades, • Design and tune control algorithms for wind turbines, wind farms, and hybrid power plants, • Ensure compliance with international grid codes, electrical models, and mechanical load requirements through control design, • Model and simulate dynamic behavior of power systems, including electrical actuators (DFIG), grid scenarios, and power converters, • Develop and implement control strategies for Power Management Systems (PMS) and Energy Management Systems (EMS) Requisitos principales, • MSc or Ph.D. in Electrical, Power Systems or Control Engineering, • Programming skills in Matlab Simulink and PSCAD, • Required English (C1); German and Spanish desirable, • 1–4 years of relevant experience, • Availability to travel, • Matlab Simulink, • PSCAD, • control design and tuning, • modeling and simulation, • PMS/EMS implementation, • grid codes compliance

Overview As Power Converter Engineer, you lead the technical development and integration of wind turbine power converters with suppliers, shaping concepts and architectures to meet electrical system requirements. You will validate designs, supervise tests, and produce documentation to support certification and manufacturing. You work closely with suppliers and cross-functional teams to ensure robust, scalable converter solutions. The role combines hands-on design with rigorous validation in a growth-focused wind energy company. Responsabilidades • Serve as the main technical focal point for converter suppliers and coordinate engineering activities for power converter development and integration, • Define converter concepts, architecture, and detailed specifications aligned with electrical system requirements, • Develop converter subassembly designs, specs, and validation plans with supplier/manufacturer collaboration, • Create and maintain technical documentation for the main converter, including specs, manuals, instructions, and certification support, • Oversee inspections, testing, and validation at supplier sites and test benches, • Provide technical support for sourcing and certification, including alternative components validation, • Perform hardware design simulations and Matlab-based analysis to support development and validation Requisitos principales, • M.Sc. in Electrical Engineering/Power Systems or B.Sc. in Electrical Engineering/Power Systems, • +3 years in the wind turbine sector, • Experience with Matlab is a plus, • Fluent English (C1 or above), • For foreign qualifications, recognition as Spanish degree equivalency is required when applying, • stakeholder management, • cross-functional collaboration, • technical communication, • power converter design, • system integration, • hardware validation and testing

Overview You design and tune control algorithms for wind turbines, wind farms, and hybrid plants to ensure safe and efficient operation. You model dynamic system behavior and validate performance against grid codes and mechanical constraints. You develop strategies for power and energy management systems, collaborating with cross-functional teams to enable scalable, reliable energy solutions. This role offers impact in advancing grid compatibility and sustainability. Compensaciones / Beneficios • Hybrid working, • opportunity to contribute to sustainability, • equal employment opportunity policy Responsabilidades, • Design and tune control algorithms for wind turbines, wind farms, and hybrid power plants, • Ensure compliance with international grid codes, electrical models, and mechanical load requirements through control design, • Model and simulate dynamic behavior of power systems, including electrical actuators (DFIG), grid scenarios, and power converters, • Develop and implement control strategies for Power Management Systems (PMS) and Energy Management Systems (EMS) Requisitos principales, • MSc or Ph.D. in Electrical, Power Systems or Control Engineering, • Programming skills in Matlab Simulink and PSCAD, • Required English (C1); German and Spanish desirable, • 1–4 years of relevant experience, • Availability to travel, • Matlab Simulink, • PSCAD, • control design and tuning, • modeling and simulation, • PMS/EMS implementation, • grid codes compliance

Overview As Power Converter Engineer, you lead the technical development and integration of wind turbine power converters with suppliers, shaping concepts and architectures to meet electrical system requirements. You will validate designs, supervise tests, and produce documentation to support certification and manufacturing. You work closely with suppliers and cross-functional teams to ensure robust, scalable converter solutions. The role combines hands-on design with rigorous validation in a growth-focused wind energy company. Responsabilidades • Serve as the main technical focal point for converter suppliers and coordinate engineering activities for power converter development and integration, • Define converter concepts, architecture, and detailed specifications aligned with electrical system requirements, • Develop converter subassembly designs, specs, and validation plans with supplier/manufacturer collaboration, • Create and maintain technical documentation for the main converter, including specs, manuals, instructions, and certification support, • Oversee inspections, testing, and validation at supplier sites and test benches, • Provide technical support for sourcing and certification, including alternative components validation, • Perform hardware design simulations and Matlab-based analysis to support development and validation Requisitos principales, • M.Sc. in Electrical Engineering/Power Systems or B.Sc. in Electrical Engineering/Power Systems, • +3 years in the wind turbine sector, • Experience with Matlab is a plus, • Fluent English (C1 or above), • For foreign qualifications, recognition as Spanish degree equivalency is required when applying, • stakeholder management, • cross-functional collaboration, • technical communication, • power converter design, • system integration, • hardware validation and testing

En TIGLOO buscas un Ingeniero/a de Datos Senior para diseñar y mantener procesos ETL y liderar la adopción de nuevas capacidades tecnológicas.

Overview In this role you ensure Nordex products meet Grid Code requirements across wind farm and turbine levels. You will translate grid standards into software and test cases as part of an agile team, and develop specifications and test plans to support compliance from sales through project delivery. You’ll work with cross-functional groups and utilities to clarify requirements and optimize processes. This position offers impact on product integration and overall grid readiness in a sustainability-focused company. Responsabilidades • Ensure grid code compliance across Nordex products with end-to-end focus, • Analyze Grid Code requirements and translate them into executable test cases, • Translate requirements to software development artifacts within an agile process, • Develop internal specifications for Grid Code compliance and support during sales and project phases, • Define test plans and ensure quality assurance for wind farm, turbine, and component levels, • Execute, evaluate, and document Grid Code compliance tests and analyze results, • Specify new functions to maintain and optimise Grid Code compliance, • Clarify Grid Code requirements in working groups and with utilities/customers, • Maintain deep understanding of Nordex product capabilities to rate compliance, • Optimize Grid Code compliance processes Requisitos principales, • Bachelor’s degree in electrical engineering or similar, • At least 3 years of experience in a similar role, • Advanced English (C1-C2); Spanish and/or German a plus, • Intercultural understanding and collaborative mindset across functions and geographies, • Availability to travel, • intercultural understanding, • collaborative mindset, • communication, • Grid Code requirements knowledge, • test planning and QA for grid-related systems, • experience with software development processes in Agile

Overview In this role you ensure Nordex products meet Grid Code requirements across wind farm and turbine levels. You will translate grid standards into software and test cases as part of an agile team, and develop specifications and test plans to support compliance from sales through project delivery. You’ll work with cross-functional groups and utilities to clarify requirements and optimize processes. This position offers impact on product integration and overall grid readiness in a sustainability-focused company. Responsabilidades • Ensure grid code compliance across Nordex products with end-to-end focus, • Analyze Grid Code requirements and translate them into executable test cases, • Translate requirements to software development artifacts within an agile process, • Develop internal specifications for Grid Code compliance and support during sales and project phases, • Define test plans and ensure quality assurance for wind farm, turbine, and component levels, • Execute, evaluate, and document Grid Code compliance tests and analyze results, • Specify new functions to maintain and optimise Grid Code compliance, • Clarify Grid Code requirements in working groups and with utilities/customers, • Maintain deep understanding of Nordex product capabilities to rate compliance, • Optimize Grid Code compliance processes Requisitos principales, • Bachelor’s degree in electrical engineering or similar, • At least 3 years of experience in a similar role, • Advanced English (C1-C2); Spanish and/or German a plus, • Intercultural understanding and collaborative mindset across functions and geographies, • Availability to travel, • intercultural understanding, • collaborative mindset, • communication, • Grid Code requirements knowledge, • test planning and QA for grid-related systems, • experience with software development processes in Agile

Overview In this role you ensure Nordex products meet Grid Code requirements across wind farm and turbine levels. You will translate grid standards into software and test cases as part of an agile team, and develop specifications and test plans to support compliance from sales through project delivery. You’ll work with cross-functional groups and utilities to clarify requirements and optimize processes. This position offers impact on product integration and overall grid readiness in a sustainability-focused company. Responsabilidades • Ensure grid code compliance across Nordex products with end-to-end focus, • Analyze Grid Code requirements and translate them into executable test cases, • Translate requirements to software development artifacts within an agile process, • Develop internal specifications for Grid Code compliance and support during sales and project phases, • Define test plans and ensure quality assurance for wind farm, turbine, and component levels, • Execute, evaluate, and document Grid Code compliance tests and analyze results, • Specify new functions to maintain and optimise Grid Code compliance, • Clarify Grid Code requirements in working groups and with utilities/customers, • Maintain deep understanding of Nordex product capabilities to rate compliance, • Optimize Grid Code compliance processes Requisitos principales, • Bachelor’s degree in electrical engineering or similar, • At least 3 years of experience in a similar role, • Advanced English (C1-C2); Spanish and/or German a plus, • Intercultural understanding and collaborative mindset across functions and geographies, • Availability to travel, • intercultural understanding, • collaborative mindset, • communication, • Grid Code requirements knowledge, • test planning and QA for grid-related systems, • experience with software development processes in Agile

En TIGLOO buscas un Ingeniero/a de Datos Senior para diseñar y mantener procesos ETL y liderar la adopción de nuevas capacidades tecnológicas.

En TIGLOO buscas un Ingeniero/a de Datos Senior para diseñar y mantener procesos ETL y liderar la adopción de nuevas capacidades tecnológicas.

Array Technologies in Pamplona, Spain seeks a Structural Project Engineer III to develop applications that analyze and optimize solar mounting systems using advanced Excel tools and programming languages.You will collaborate with Array teams and engineering contractors, serving as a technical lead a

INGENIERO/A DE PROCESOS Y TRANSFORMACIÓN. Desde Marlex estamos colaborando con una importante compañía ubicada en la comarca de Pamplona, en la búsqueda de un/a Ingeniero/a de procesos y transformación.

Eosol Group en Pamplona busca un/a Ingeniero/a Piping con al menos 3 años de experiencia para diseñar sistemas de tuberías en plantas energéticas y químicas.

En Eosol Group, líder en soluciones energéticas innovadoras, buscamos incorporar a nuestro equipo un/a Ingeniero/a Piping con al menos 3 años de experiencia para unirse a nuestra creciente división de ingeniería. Como Ingeniero/a Piping, serás responsable del diseño integral de sistemas de tu

• Being a key driver in the mechanical design for the Tower, • Define design space models for components and perform the geometrical integration of systems in the tower layout, • Analyze the designs in collaboration with other departments inside Nordex and external suppliers, • Support other departments to integrate different components and systems in the tower layout, • Create the layout design considering geometrical requirements coming from Product Management, Engineering, Production, Logistics, Service and HSE, • Identify synergies across projects and products to increase reuse of parts and decrease complexity and cost, • Determine the scope of new design based on Engineering Change Request, • Degree in Mechanical Engineering*, • Deep knowledge in CAD and PLM tools, PTC Creo/Windchill or Siemens NX/Teamcenter, • Comfortable in handling large assemblies - Experience in the field of configuration management and modularisation, • At least five years of a experience in a similar role, • Advanced level of English (C1), • Extroverted personality and able to bring people together, • Self-starter, results-oriented and deadline-focused, • For foreign qualifications, recognition as the corresponding Spanish degree equivalency is required when applying. In addition to the opportunity to make our world a little more sustainable, we offer you: • Some offers may vary by location Nordex adheres to a policy of equal employment opportunity. All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws. #J-18808-Ljbffr

Ingeniero/a de Proyectos E&IC (Eléctrica, Instrumentación y Control).

Nordex Group is seeking a Mechanical Design Engineer to drive the tower's mechanical design and create robust layout models. You will collaborate with internal departments and external suppliers to ensure geometrical integration and efficient component reuse across projects. The role requires a degree in mechanical engineering, extensive CAD/PLM tool experience, and at least 5 years in a similar position, with advanced English (C1). #J-18808-Ljbffr

Únete a Eosol Group como Ingeniero/a de Software Embebido – UAV/Robótica!. Como nuestro/a próximo/a Ingeniero/a de Software Embebido, tendrás un papel crucial en el desarrollo y la evolución de nuestros sistemas.

This role is for an experienced Field Application Engineer with technical knowledge of Fluke Industrial Products and the applications these products are used in. The Field Application Engineer will enable the local sales team to drive growth for the selected Fluke products in the region. They will be the technical go-to expert for the selected products and will provide pre-and post-sales technical support for distributors, end-customers and the local sales teams. • Support the local sales team and customers with application, technical and competitive information, • Provide Pre & Post sales technical support to our field sales team, distribution channels and end users, • Develop technical skills through training provided by product experts, self-learning on the job and liaising with factory-based technical support engineers, • Provide sales support at shows, conferences, seminars and roadshows; be able to prepare and deliver presentations and product demonstrations virtually and on-site, • Develop training programs for both online and classroom delivery, • Work with Fluke’s CRM (Microsoft Dynamics Software) to record customer communications and track opportunities, • Assist EMEA sales and marketing team with New Product Introductions (NPIs), • Work with EMEA team and Sales Program Managers to develop ideas for regional marketing activities, • Provide technical assistance to Inside Sales team, • Strong proven technical product and application knowledge preferably on the Fluke Products or with Industrial Test and Measurement products, • Able to present and demonstrate measurement solutions to end users, • Able to communicate and motivate via different media platforms., • Understands the principles of sales and solutions selling., • Build relationship with key customers based on technical knowledge., • Ability to work effectively in a cross-functional team environment, • A high level of independence and ability to “self-educate”., • Fluent in Spanish and English., • Knowledge of additional languages ( Portuguese, Italian) is highly valued. Fortive's essential technology makes the world safer and more productive. We accelerate transformation in high-impact fields like workplace safety, build environments, and healthcare. We are a global industrial technology innovator with a startup spirit. Our forward-looking companies lead the way in healthcare sterilization, industrial safety, predictive maintenance, and other mission-critical solutions. We're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care. We are a diverse team 10,000 strong, united by a dynamic, inclusive culture and energized by limitless learning and growth. We use the proven Fortive Business System (FBS) to accelerate our positive impact. At Fortive, we believe in you. We believe in your potential—your ability to learn, grow, and make a difference. At Fortive, we believe in us. We believe in the power of people working together to solve problems no one could solve alone. At Fortive, we believe in growth. We're honest about what's working and what isn't, and we never stop improving and innovating. Fortive: For you, for us, for growth. Fluke is leading the world in creating software, test tools and technology that will support customers today and in the future. We are a customer-obsessed market leader with a strong reputation for reliability, quality and safety.A wholly owned subsidiary of Fortive Corporation ( Fluke is a global corporation headquartered in the greater Seattle area. Driven by the successful Fortive Business System, Fluke offers the passion of a startup with the resources of a Fortune 500 company. We are focused on the growth of our individual employees, teams and the Fluke brand. We Are an Equal Opportunity Employer. Fortive Corporation and all Fortive Companies are proud to be equal opportunity employers. We value and encourage diversity and solicit applications from all qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity or expression, or other characteristics protected by law. Fortive and all Fortive Companies are also committed to providing reasonable accommodations for applicants with disabilities. Individuals who need a reasonable accommodation because of a disability for any part of the employment application process, please contact us at #J-18808-Ljbffr

Select how often (in days) to receive an alert: As part of our growth we are looking for a WT Software Automation Engineer. In this role, you will perform the following tasks: • New and further development of control technology functions in the area of operational control of the wind turbine, • Technical clarification and creation of software specifications, • Implementation of software functions on programmable logic controllers (PLCs) based on defined requirements, • Definition of test and acceptance criteria for the qualification of the wind turbine software, • Quality assurance through software testing on Hardware-in-the-Loop (HiL) systems in the software laboratory and on-site at wind turbines, • Creation of the related software documentation, • Bachelors degree in Electrical Engineering, Automation Technology, • At least 2-4 years of experience, • Fluent level of English is a must (C1 or above). Spanish and/or German are a great plus In addition to the opportunity to make our world a little more sustainable, we offer you: • Some offers may varyby location Nordex adheres to a policy of equal employment opportunity. All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws. The manufacture of wind energy plants in the on-shore segment has been our core competence and passion for around 40years. With more than 57GW installed capacity worldwide, our turbines supply sustainable energy to more than 80% of the global energy market and we are one of the largest companies in the wind industry. National subsidiaries in more than 40markets and production facilities in Germany, Spain, Brazil, the USA, Mexico and India offer our more than 10,400employees the opportunity for international and intercultural cooperation. We are growing and together driving forward the expansion of alternative energies worldwide - if you wish, from now on with you. Join the #TeamNordex We look forward to receiving your application!To make it more convenient for you, we are happy to receive your application without a cover letter. #J-18808-Ljbffr

Nordex Group seeks an IT AI Governance Specialist to lead secure, scalable AI governance. You will align AI initiatives with technical standards, regulatory requirements, and corporate governance across IT and business units. You will define frameworks, oversee architecture and cybersecurity alignment, and collaborate with partners and stakeholders worldwide to ensure responsible AI adoption and efficient deployment. #J-18808-Ljbffr

As a Chief Engineer Reliability (m/f/d), you will define and execute the reliability engineering strategy for the onshore wind turbine fleet of Nordex. Working within the Engineering, Technical Leads organization, you will drive design improvements, strengthen reliability standards, and support the integration of proven engineering practices across products and upgrades. This role contributes to improving turbine performance, reliability, and operational effectiveness throughout the fleet. YOUR TASKS Define and execute the reliability engineering strategy for the onshore wind turbine fleet Establish Design for Reliability (Df R) principles across new products, upgrades, and engineering development activities Act as technical authority for critical turbine components including drivetrain, blade, and electrical systems Drive the adoption of high-reliability engineering standards where technically and economically appropriate Lead design improvements to eliminate recurring failures and increase fleet reliability performance Establish a structured feedback loop between field operations and engineering teams to support continuous improvement Apply offshore wind reliability learnings, predictive maintenance practices, and advanced condition monitoring solutions to onshore turbine development YOUR PROFILE Master’s degree or Ph D in Mechanical, Electrical, Aerospace Engineering, or a comparable qualification More than 10 years of experience in offshore wind energy with a focus on reliability-related engineering roles Strong expertise in reliability engineering, structural analysis, and failure reduction methodologies Proven experience working with complex wind turbine systems and critical component reliability Knowledge of condition monitoring systems, predictive maintenance, and performance improvement approaches Excellent command of Business English including technical communication skills Ability to collaborate effectively across engineering, product development, and operational functions Your Benefits Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to. #Greener Future : Shape a sustainable future with us – your work makes a real contribution to the environment. #Flexibility : Work-life balance is important to us – we offer flexible working hours, various working time models, and up to 8 days of mobile work per month. #Mobility : We promote sustainable mobility – we support you with an 80% subsidy for the public transportation ticket (Deutschlandticket) and a €15 employer contribution for bike leasing. #Care For Tomorrow : With our company pension scheme, you secure a financial advantage for the future – complemented by the option of occupational disability insurance. #Health : Your health matters to us – benefit from health days, company sports activities, office yoga, and free support from the pme Family Service. #Holiday : We offer you 30 days of vacation per year based on a full-time position, plus December 24th and 31st off. #One Company : Stronger together– with over 10,000 employees from 95 nations, we promote an international and collegial corporate culture. #Corporate Benefits : Saving made easy – enjoy attractive discounts on travel, tech, and much more. Some offers may vary by location Nordex adheres to a policy of equal employment opportunity. All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws. Severely disabled applicants and applicants of equal status will be given special consideration in the event of equal suitability. In principle, employment is also possible on a part-time basis. #J-18808-Ljbffr

Nordex Group in Navarre, Spain, is seeking a Power Converter Engineer to lead technical activities for converter development and integration within wind turbine programs. The role requires defining converter concepts, coordinating supplier activities, and ensuring alignment with system requirements. The candidate will develop subassembly designs, validation plans, and documentation, while supporting sourcing and certification efforts. Proficiency in Matlab is advantageous. #J-18808-Ljbffr

Fortive is seeking an experienced Field Application Engineer to support Fluke Industrial Products in Spain. You will be the technical go-to expert for the selected products, enabling the local sales team to drive growth and delivering pre- and post-sales support to distributors and end customers. Responsibilities include product demonstrations, training and presentations, CRM activity, and collaboration with regional teams on NPIs and marketing ideas. #J-18808-Ljbffr

Nordex Group in Sarriguren, Spain (31621) is seeking a Junior Engineer to tailor electrical simulation models for grid integration and wind turbine projects. The role involves coordinating with customers and internal teams to ensure model accuracy across platforms. The candidate should hold a bachelor and master in electrical engineering, with strong English and, ideally, German or Spanish, and a willingness to work on-site at the Sarriguren location. #J-18808-Ljbffr

Cronoshare es una plataforma online para profesionales que quieren encontrar nuevos clientes. Buscamos Arquitecto/a en Elcano y alrededores. Pertenecer a la red de profesionales de Cronoshare no tiene coste y recibirás nuevos clientes según tus preferencias, de forma personalizada. Requisitos: • Conocimientos previos para desarrollar funciones de Arquitecto/a., • Organización, buena relación con el cliente y gestión de tiempo., • Profesionalidad y proactividad. Qué ofrecemos: • Solicitudes de nuevos trabajos y clientes en tu zona, que necesitan Arquitecto/a., • Gestión propia de los clientes y márgenes comerciales., • Sin intermediarios: tú fijas tus tarifas y horarios. ¿Cómo funciona Cronoshare? Gracias a nuestra plataforma de gestión de clientes, podrás aceptar o descartar solicitudes de trabajos en tu área, enviando presupuestos solo a los clientes que más te interesen. No pagarás suscripciones ni tarifas mensuales, además tampoco tienes que abonar comisiones por cada cliente que consigas gracias a nosotros. Para conseguir nuevos clientes, solo tienes que incurrir en una pequeña inversión y podrás acceder a estas solicitudes. Empieza a hacer crecer tu actividad comercial o negocio. Si eres freelance, autónomo o pyme, te esperamos.

REQUISITION ID: 13619 LOCATION: Sarriguren, ES, 31621 YOUR TASKS: • Site-specific adjustment of the Nordex simulation models using several software platforms such as PSS/E, PSCAD, DIgSILENT, ANATEM..., • Internal quality checks on the simulation models of the WT and PPC, • Support the sales department during contractual discussions, • Support NX's clients and their consultants during the connection studies for grid integration YOUR PROFILE: Bachelor's Degree in Electrical Engineering and Master's Degree in Electrical Engineering, Industrial Engineering, Power Systems Engineering, Renewable Energy Engineering, or a related engineering discipline • Simulation software (PSS/E, PSCAD, DIgSILENT, ANATEM,...) will be a plus, • Advanced level of English (C1); desirable: German, Spanish YOUR BENEFITS In addition to the opportunity to make our world a little more sustainable, we offer you: *Some offers may varyby location Nordex adheres to a policy of equal employment opportunity. All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws. The manufacture of wind energy plants in the on-shore segment has been our core competence and passion for around 40years. With more than 57GW installed capacity worldwide, our turbines supply sustainable energy to more than 80% of the global energy market and we are one of the largest companies in the wind industry. National subsidiaries in more than 40markets and production facilities in Germany, Spain, Brazil, the USA, Mexico and India offer our more than 10,400employees the opportunity for international and intercultural cooperation. We are growing and together driving forward the expansion of alternative energies worldwide - if you wish, from now on with you. Join the #TeamNordex #J-18808-Ljbffr

Nordex Group is seeking an Electrical Engineer Model & Simulation to join our Model Application team. You will perform site-specific adjustments of Nordex simulation models using PSS/E, PSCAD, DIgSILENT and ANATEM to support grid integration studies. The ideal candidate has a BSc in Electrical Engineering, 3+ years of experience with grid integration and simulation models, and English at B2 level or higher. German or Spanish are a plus. Availability to travel is required. #J-18808-Ljbffr

As part of our growth we are looking for an Electrical Engineer Model & Simulation. As part of the Model Application team, you will perform the following tasks: • Site-specific adjustment of the Nordex simulation models using several software platforms such as PSS/E, PSCAD, DIgSILENT, ANATEM, etc., • Internal quality checks on the simulation models of the WT and PPC, • Support the sales department during contractual discussions, • Support NX's clients and their consultants during the connection studies for grid integration As part of our growth we are looking for an Electrical Engineer Model & Simulation. As part of the Model Application team, you will perform the following tasks: • Site-specific adjustment of the Nordex simulation models using several software platforms such as PSS/E, PSCAD, DIgSILENT, ANATEM, etc., • Internal quality checks on the simulation models of the WT and PPC, • Support the sales department during contractual discussions, • Support NX's clients and their consultants during the connection studies for grid integration, • BSc in Electrical Engineering or similar degree*, • Experience with simulation software (PSS/E, PSCAD, DIgSILENT, ANATEM, etc.), • +3 year of experience with grid integration and simulation models, • English (B2 or higher). German/Spanish are a plus, • Availability to travel, • For foreign qualifications, recognition as the corresponding Spanish degree equivalency is required when applying. In addition to the opportunity to make our world a little more sustainable, we offer you: • Some offers may vary by location Nordex adheres to a policy of equal employment opportunity. All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws. #J-18808-Ljbffr

Ingeniero/a de Desarrollo especializado/a en Diseño Mecánico.

DESIGN ENGINEER SENIOR | CATIA V5 Pamplona (Navarra) | Contrato indefinido | Proyectos estables ¿Tienes experiencia en diseño mecánico y un dominio avanzado de CATIA V5? ¿Te gustaría participar en proyectos de ingeniería relacionados con el sector de la energía eólica y los aerogeneradores? En RDT Ingenieros buscamos incorporar 2 Design Engineers Senior para participar en proyectos estables de diseño y desarrollo de producto dentro de un entorno industrial y tecnológico. Buscamos profesionales con experiencia en diseño 3D, elaboración de planos y definición técnica de producto, capaces de aportar autonomía y criterio técnico en las diferentes fases del diseño detallado. Realizar modelado 3D y diseño de componentes y conjuntos mecánicos mediante CATIA V5. Desarrollar planos 2D de producto, interfaces y elementos de referencia (datums), definiendo tolerancias dimensionales y geométricas. Analizar cadenas de tolerancias y verificar la compatibilidad entre componentes y conjuntos. Gestionar la documentación técnica y las definiciones de diseño durante las fases de ingeniería de detalle. Participar en la definición y evolución de soluciones de diseño, garantizando su viabilidad técnica y funcional. Gestionar la información de diseño mediante herramientas PDM y colaborar con los sistemas de gestión industrial. Grado en Ingeniería, preferiblemente Mecánica, Aeronáutica o similar. Mínimo 5 años de experiencia trabajando con CATIA V5 , especialmente en los módulos: Part Design. Assembly Design. Generative Shape Design. Drafting. Experiencia demostrable en modelado 3D y generación de planos 2D de detalle. Conocimientos de tolerancias dimensionales y geométricas, datums y análisis de cadenas de tolerancias. Experiencia en diseño detallado de producto y documentación técnica. Nivel de inglés B2-C1. Se valorará especialmente la experiencia en componentes para aerogeneradores, palas eólicas o materiales compuestos, estructuras metálicas soldadas, piezas de fundición o mecanizadas y diseño de utillajes. También se valorará el manejo de herramientas PDM, especialmente 3DEXPERIENCE, así como de sistemas ERP/MRP como SAP u Odoo. Contrato indefinido con RDT Ingenieros. Incorporación a proyectos estables de ingeniería. Participación en desarrollos vinculados al sector de la energía eólica y los aerogeneradores. Entorno técnico en el que poner en valor tu experiencia y seguir desarrollándote profesionalmente. Ubicación del proyecto: Pamplona (Navarra). ¿Te interesa dar el siguiente paso en tu carrera como diseñador/a mecánico/a? Si CATIA V5 es tu herramienta de trabajo habitual y buscas un proyecto donde aportar tu experiencia, ¡queremos conocerte! #J-18808-Ljbffr

As part of our growth, we are looking for a Power Converter Engineer. You will be responsible for performing the following tasks: • Act as the main technical focal point for converter suppliers, leading and coordinating all engineering activities related to power converter development and integration, • Define the converter concept, architecture, and detailed technical specifications of power converters for Nordex WTGs ensuring alignment with power electrical system requirements, • Develop converter subassembly designs, specifications, and validation plans, collaborating with suppliers and manufacturers on component qualification and testing, • Create and maintain technical documentation related to the main converter, including specifications, manuals, instructions, and certification support documentation, • Support and oversee inspections, testing, and validation activities at supplier facilities, as well as in stand‑alone and generator‑connected test benches, • Provide technical support for sourcing and certification activities, including the identification and validation of alternative converter components and support for wind turbine certification processes, • Perform and enhance hardware design simulations and simulation tools using Matlab-based environments to support converter development and validation As part of our growth, we are looking for a Power Converter Engineer. You will be responsible for performing the following tasks: • Act as the main technical focal point for converter suppliers, leading and coordinating all engineering activities related to power converter development and integration, • Define the converter concept, architecture, and detailed technical specifications of power converters for Nordex WTGs ensuring alignment with power electrical system requirements, • Develop converter subassembly designs, specifications, and validation plans, collaborating with suppliers and manufacturers on component qualification and testing, • Create and maintain technical documentation related to the main converter, including specifications, manuals, instructions, and certification support documentation, • Support and oversee inspections, testing, and validation activities at supplier facilities, as well as in stand‑alone and generator‑connected test benches, • Provide technical support for sourcing and certification activities, including the identification and validation of alternative converter components and support for wind turbine certification processes, • Perform and enhance hardware design simulations and simulation tools using Matlab-based environments to support converter development and validation, • M.Sc. in Electrical Engineering/Power Systems or B.Sc. in Electrical Engineering/Power Systems or similar*, • +3 years in the wind turbine sector, • Experience with Matlab is a plus, • Fluent level of English is required (C1 or above), • For Spain: foreign qualifications, recognition as the corresponding Spanish degree equivalency is required when applying. In addition to the opportunity to make our world a little more sustainable, we offer you: • Some offers may vary by location Nordex adheres to a policy of equal employment opportunity. All employment decisions are made without regard to religion, age, sex, color, national origin, handicap, or other protected class and are in full compliance with all federal and state laws. #J-18808-Ljbffr

Beckman Coulter Diagnostics, a Danaher operating company, seeks a Field Service Engineer to install and maintain Beckman Coulter products at customer sites across Spain, ensuring optimal performance and customer satisfaction. The position reports to the Field Technical Service Supervisor and is an on-site role in Spain, with travel over 50% and a valid driver's license. A Bachelor's degree in Engineering and fluency in English and Spanish are required. #J-18808-Ljbffr

RDT Ingenieros busca un/a Ingeniero/a de Proyectos E&IC (Eléctrica, Instrumentación y Control) para liderar y coordinar proyectos industriales en Lesaka, Navarra, con posible intervención en Etxebarri.

Una compañía industrial líder, ubicada en Navarra, busca un Ingeniero de Procesos y Calidad para asegurar la calidad del producto y optimizar procesos de fabricación conforme a ISO 9001.El candidato reportará al Responsable de Procesos y Calidad y colaborará estrechamente con Ingeniería de Pr

Buscamos incorporar Ingeniero de Procesos y Calidad para reforzar su departamento de Ingeniería de Procesos y Calidad.

• Diseño y desarrollo de maquinaria industrial y componentes mecánicos. - Modelado 3D, elaboración de planos y preparación de documentación técnica. - Participación en el desarrollo de nuevos proyectos y en la mejora de diseños existentes. - Coordinación con otros departamentos (producción, calidad y compras) para garantizar la viabilidad técnica y funcional de los proyectos. - Seguimiento de los proyectos desde la fase inicial de diseño hasta su fabricación y montaje.

Se busca cubrir un puesto de delineación y oficina técnica para trabajar en Elcarte, con contrato temporal y jornada completa. La persona seleccionada se encargará de elaborar y modificar planos técnicos orientados a fabricación y mecanizado, además de diseñar y modelar piezas mediante programas CAD tipo SolidWorks u otros similares. También será responsable de interpretar planos y documentación técnica para trasladarlos a producción, preparar planos de fabricación, despieces y documentación asociada, y revisar medidas, ajustes y tolerancias según los requisitos de cada proyecto. Entre las tareas habituales estará apoyar a producción resolviendo dudas técnicas y gestionando actualizaciones de planos, así como mantener y organizar el archivo de documentación técnica. El horario será de lunes a jueves de 08:00 a 13:00 y de 15:00 a 18:00, y los viernes de 07:00 a 14:00. Durante julio y agosto se trabajará en jornada continua. La duración del contrato es mediante contratos mensuales.

Se busca un profesional con experiencia en ingeniería de datos para incorporarse a un equipo tecnológico dinámico en Pamplona. La persona seleccionada liderará iniciativas clave de integración, transformación y automatización de datos, conectando las necesidades de las áreas de negocio con soluciones técnicas robustas y escalables. Trabajará en estrecha colaboración con clientes internos y equipos multidisciplinares, asegurando que los flujos de datos estén optimizados y alineados con los objetivos estratégicos de la organización. El rol implica un enfoque práctico en el desarrollo y mantenimiento de procesos ETL, y en la extracción de información desde sistemas como SAP S/4HANA, SAP BW y bases de datos Oracle. También se encargará de diseñar arquitecturas de datos que faciliten el acceso a la información para el análisis, participará en proyectos de automatización con plataformas como n8n, y contribuirá a iniciativas pioneras de Inteligencia Artificial aplicada a procesos de negocio. El entorno de trabajo fomenta la innovación y el desarrollo profesional continuo, con proyectos de alto impacto tecnológico. Se valora la capacidad de documentar soluciones y transformar requerimientos complejos en implementaciones técnicas eficientes. La oferta es un contrato indefinido, jornada completa de 40 horas semanales, con horario flexible y modelo híbrido (predominio presencial). El horario presencial es de lunes a jueves de 08:00 a 17:00 y viernes de 08:00 a 14:00. El salario bruto anual oscila entre 35.000 y 45.000 euros, según experiencia.

Se busca personal para realizar labores de reparación e instalación de calderas en Berriozar. El trabajo consiste en instalar equipos de gas, gasóleo, biomasa y sistemas de calefacción tanto en hogares como en locales comerciales. También se realizarán tareas de diagnóstico, mantenimiento preventivo y reparación de averías en calderas y equipos de climatización. Se encargará de la puesta en marcha y revisión periódica de las instalaciones según la normativa RITE, además de ofrecer asesoramiento técnico a los clientes sobre el uso y cuidado de sus equipos. Otras funciones incluyen la elaboración de partes de trabajo, presupuestos y la documentación técnica de cada intervención, siempre siguiendo los protocolos de seguridad y prevención de riesgos laborales. La jornada es completa, con horario de lunes a viernes de 8:00 a 16:00 horas.

Frigorista-Técnica/o de mantenimiento de Climatización Navarra. Como referente de la transformación ecológica y líder mundial en Medioambiente, Veolia, empresa multinacional de servicios de mantenimiento y energía, especializada en la gestión integral de agua, residuos y energía, quiere inco

RDT Ingenieros en Pamplona busca un/a Ingeniero/a de Construcción y Montaje Eólico para participar en soluciones de izado, transporte y montaje de grandes componentes, trabajando con equipos de ingeniería, construcción y operaciones.

Ingeniero/a de procesos y planificación.

Sesé, aliado de las compañías que buscan soluciones integrales, digitales y sostenibles para su cadena de suministro, busca un/a Ingeniero/a de procesos y planificación para unirse a la Operativa de Automoción Internacional.

En BANTEC buscamos incorporar una persona para participar en la gestión y financiación de proyectos de I+D+i de empresas industriales, de servicios y Administraciones Públicas.La siguiente información ofrece un resumen de las habilidades, cualidades y cualificaciones necesarias para este puesto.