Trabajos Ingenieria en San SebastiánCrear alertasJornada completa

Project Manager – Sistemas de Tráfico, Transporte y Túneles | San Sebastián Ubicación: San Sebastián. Desde Harry Hope estamos seleccionando un/a Project Manager para liderar el servicio de Mantenimiento de los Sistemas de Gestión de Tráfico de San Sebastián, para una importante empresa de referencia en el sector de la construcción e instalaciones a nivel nacional. Tus responsabilidades: • Liderar y gestionar proyectos de mantenimiento e instalaciones en entornos de tráfico urbano y sistemas ITS, • Planificar, coordinar y supervisar la ejecución técnica y económica de los proyectos, • Controlar costes, plazos y calidad, garantizando el cumplimiento de objetivos, • Gestionar equipos técnicos y coordinar proveedores y subcontratas, • Supervisar sistemas de tráfico, túneles y redes de telecomunicaciones asociadas, • Ser la interlocución principal con el cliente, asegurando altos niveles de satisfacción Qué buscamos: • Titulación en Ingeniería Técnica o Superior (Telecomunicaciones, Industrial o similar), • Mínimo 5 años de experiencia en proyectos de instalación y/o mantenimiento de sistemas ITS, tráfico, túneles o instalaciones similares (alumbrado urbano, climatización en túnel, etc.), • Conocimientos técnicos en sistemas de tráfico/túneles y redes de telecomunicaciones, • Experiencia en gestión de proyectos y control económico, • Capacidad de liderazgo de equipos y orientación al cliente, • Disponibilidad para viajar a nivel nacional puntualmente, • Carnet de conducir B, • Formación en PRL (mínimo 60h), • Hasta 55.000€ brutos/año según experiencia y valía 📩 Si te interesa o conoces a alguien que encaje en el perfil, ¡escríbeme o comparte esta publicación! #ProjectManager #ITS #Tráfico #Ingeniería #PaísVasco #SanSebastián #Empleo

🚀 En Akkodis somos una de las compañías líderes a nivel global en ingeniería, tecnología e I+D, impulsando la transformación digital y la innovación en sectores como energía, industria, automoción, ferroviario, aeroespacial y telecomunicaciones. Trabajamos junto a grandes compañías desarrollando proyectos de alto impacto tecnológico y ofreciendo a nuestros profesionales estabilidad, formación continua y un plan de carrera adaptado a su crecimiento. Actualmente buscamos incorporar un/a Ingeniero/a Mecánico/a de Diseño para participar en un proyecto tecnológico e industrial estable ubicado en Lasarte-Oria (Gipuzkoa). Esta posición está orientada a profesionales de ingeniería con experiencia en diseño mecánico de estructuras metálicas, armarios y envolventes, que quieran participar en el desarrollo de equipos industriales y soluciones de electrónica de potencia. Buscamos perfiles con al menos 2 años de experiencia en diseño mecánico, especialmente en entornos industriales donde el diseño, desarrollo e ingeniería de producto tengan un peso relevante. 🛠️ ¿Cuáles serán tus funciones? ✔️ Diseñar armarios eléctricos, envolventes y estructuras metálicas para equipos de electrónica de potencia. ✔️ Desarrollar soluciones mecánicas teniendo en cuenta los requisitos de fabricación, montaje, mantenimiento y funcionalidad del producto. ✔️ Realizar el diseño y modelado 3D de componentes y conjuntos mecánicos mediante herramientas CAD. ✔️ Diseñar componentes y soluciones en chapa metálica, considerando procesos de fabricación y conformado. ✔️ Trabajar con perfiles y estructuras metálicas, desarrollando soluciones adaptadas a las necesidades del equipo. ✔️ Elaborar, revisar y mantener la documentación técnica asociada a los diseños desarrollados. ✔️ Colaborar con los equipos de fabricación, montaje e ingeniería para garantizar la viabilidad técnica y productiva de las soluciones. ✔️ Participar en el desarrollo y mejora de equipos industriales y soluciones de ingeniería de producto. ✔️ Analizar y proponer mejoras sobre diseños existentes, buscando optimizar su fabricación, montaje, funcionalidad y mantenimiento. ✔️ Trabajar en coordinación con equipos multidisciplinares durante las diferentes fases de desarrollo del producto. 🎯 ¿Qué buscamos? 🔹 Grado en Ingeniería Mecánica, Ingeniería Industrial – especialidad Mecánica o formación equivalente. 🔹 Experiencia mínima de 2 años en diseño mecánico dentro de entornos industriales. 🔹 Experiencia en diseño de estructuras metálicas, armarios, envolventes o productos fabricados en chapa metálica. 🔹 Conocimientos de diseño en chapa y procesos de conformado. 🔹 Conocimientos de perfiles y estructuras metálicas. 🔹 Conocimientos de fabricación y montaje mecánico. 🔹 Manejo avanzado de herramientas CAD 3D, especialmente Solid Edge. 🔹 Se valorará experiencia adicional con SolidWorks u otras herramientas de diseño 3D. 🔹 Nivel de inglés B2. 🔹 Capacidad para trabajar en equipos multidisciplinares, orientación técnica y capacidad para desarrollar soluciones de forma autónoma. ⭐ Se valorará especialmente • Experiencia en diseño de armarios eléctricos, cuadros eléctricos o equipos industriales., • Experiencia en sectores relacionados con energía, electricidad, automatización industrial o electrónica., • Conocimientos o experiencia en electrónica de potencia. delineación. 💼 ¿Qué ofrecemos? ✅ Contrato indefinido. ✅ Incorporación a un proyecto industrial estable y de largo recorrido. ✅ Participación directa en proyectos tecnológicos relacionados con diseño mecánico y equipos de electrónica de potencia. ✅ Desarrollo de soluciones de ingeniería desde la fase de diseño, trabajando en coordinación con diferentes áreas técnicas. ✅ Formación continua y desarrollo profesional dentro de Akkodis. ✅ Integración en un entorno industrial y tecnológico con proyectos de alto valor añadido. 📍 Ubicación: Lasarte-Oria (Gipuzkoa). 📌 Modalidad: 100% presencial. Si eres ingeniero/a mecánico/a y cuentas con experiencia en diseño de estructuras, chapa metálica, armarios o envolventes, y tienes experiencia trabajando con Solid Edge o herramientas CAD 3D, esta puede ser una buena oportunidad para seguir desarrollándote en proyectos de ingeniería y diseño de equipos industriales. ¡Queremos conocerte!

Se incorporará en la organización para realizar tareas diversas tanto en el área de Oficina Técnica con funciones varias: • Búsqueda de materiales., • Cálculo de costes de nuevos proyectos., • Desarrollo de producto., • Elaboración y gestión de documentación. Pensamos en una persona con formación de Ingeniería, que aporte una experiencia previa de unos 3 años en funciones similares y buenos conocimientos de Excel, Access, IA aplicada a la industria. Se ofrecen muy buenas posibilidades de desarrollo profesional. Se requieren conocimientos de Inglés. Se ofrece una retribución entre 33.000€ y 39.000€ brutos anuales.

Desde SEGULA Technologies buscamos un/a INGENIERO/A INSTALACIONES especializado en protección contra incendio y con experiencia en proyectos industriales, con ubicación en Donosti. ¿Cuáles serán tus funciones? + Diseño de sistemas de detección y alarma. + Diseño de redes de rociadores, hidrantes y BIE. + Cálculos hidráulicos. + Cumplimiento de normativa aplicable. + Elaboración de especificaciones técnicas. + Coordinación con el resto de disciplinas. + Manejo de Presto para presupuestos. Let´s shape the future together! Amplia tu campo de acción con un grupo de ingeniería global en rápido crecimiento. En SEGULA Technologies, tendrás la oportunidad de trabajar en proyectos apasionantes y dar forma al futuro dentro de una empresa para la que la innovación es inseparable de la ingeniería. Nuevas formas de movilidad, vehículos autónomos, la fábrica del futuro, realidad aumentada... estas son las preocupaciones diarias de nuestros 15 000 ingeniosos talentos en más de 30 países. Tanto si eres estudiante, recién graduado o tienes experiencia, ingeniero o gestor de proyectos, en SEGULA encontrarás la oportunidad que dará un nuevo sentido a tu carrera. ¡Da el paso, únete a nosotros! Requisitos: + Experiencia mínima de 2 años como ingeniero especializado en protección contra incendios. + Experiencia en diseño PCI para proyectos industriales. + Se valorará especialmente la experiencia en proyectos industriales de gran escala relacionados con sectores de baterías, industria química, farmacéutica, centros de datos o instalaciones de proceso complejas + Nivel de inglés intermedio. Se ofrece: + Incorporación inmediata al puesto. + Salario competitivo + posibilidad de contratar beneficios sociales. + Formación en idiomas, competencias y conocimientos técnicos + Proyectos innovadores en clientes internacionales en los distintos sectores. + Acceso a tecnologías de vanguardia y herramientas avanzadas. + Ambiente de trabajo profesional y muy especializado. ¡Te esperamos!

CIDETEC Energy Storage is looking for an engineer to join in the Energy Materials Unit. The position will cover the needs of the strategic projects carried out in the cell assembly Pilot Plant. If you want to be part of this revolution, we are waiting for you! Our work covers the entire value chain, from battery chemistry to the final application. We design and develop cells, modules and battery packs tailored to our customers needs, with a clear focus on technology transfer to industry. The researchers work will be related to project management. Your contribution You will form part of a state-of-the-art research centre, geared to sustainability and the circular economy, which has helped electrify Spains roads and is now working towards 100% future sustainability. The successful candidate will work in the Pilot Plant, implementing new processes and techniques for the manufacture of electrodes and lithium ion cells. For this purpose, he or she must have knowledge in the set-up and maintenance of machinery, and in process development, industrialization and optimization. The successful candidate will work independently according to the defined work plan. He or she will participate in the following tasks: • Manufacture of electrodes for batteries and manufacture of cells: Ink processing and knife and slot die coating, electrode stacking, ultrasonic and laser welding, electrolyte filling, • Maintenance and set-up of machinery. Design of coupling systems for new machinery. • Battery manufacturing: keeping records and traceability of materials. Maintain, and work on the quality of the systems., • Ensure the quality of the processes carried out in the Pilot Plant, development of quality protocols and check list., • Project management., • Drafting of project proposals. What we offer you • At CIDETEC you will be able to develop your career alongside a team of top-level professionals, in a young yet committed environment, dedicated to innovation and seeking to provide practical solutions that result in a more sustainable world., • Professional development opportunities that allow you to build a solid career, working on projects that transform both industry and society., • Work with teams at the very highest level in local, national and European settings., • Work-life balance initiatives, • Continuous training, • Privileged setting in a safe and friendly environment., • Salary according to the candidates merits., • Immediate start date. Requirements: Education: Chemical, mechanical, industrial engineering or similar. Languages: English Knowledge: The successful candidate must demonstrate knowledge of and experience in: • Process engineering: process development, industrialization and optimization. Experience in DOE and SPC., • Set-up and commissioning of new equipment: FAT/SAT. Knowledge of design and maintenance of machinery., • Lean manufacturing, 6-sigma and continuous improvement., • Manufacturing processes: electrode manufacturing, die cutting, stacking (Z-folding, winding), ultrasonic and laser welding, electrolyte filling, hot pressing., • Quality: Create quality protocols, monitor and product registration. Perform troubleshooting activities (8D, Ishikawa), risk analysis (FMEA, HAZOP) and support NCR and CAPA reports. Experience in pouch and/or prismatic cells. • Experience leading teams., • Experience in European and industrials project management and coordination. Observations: A highly motivated person, with a keen interest in research and innovation, you will join a multidisciplinary team. You will be able to organise your work, meeting both the deadlines and the established objectives. Problem-solving capacity and scientific criteria. Good communication skills, both verbal and written. Having undertaken a placement abroad and more than 3 years work experience will be considered a plus. *We positively value applications from people with a disability equal to or greater than 33%, in compliance with current legislation, the General Law on the Rights of Persons with Disabilities and their social inclusion (LGD).

Position Overview: We are seeking a EU/UK based, detail-oriented and analytical Cost Engineer to join our Project Controls team. The role requires strong experience with SAP, particularly in cost management, purchase orders, commitments, actual costs, budgets, and financial reporting. The Cost Engineer works closely with project managers, procurement, finance, engineering, and commercial teams to ensure accurate and timely cost control. Key Responsibilities: • Budgeting & Cost Control & Reporting, • Develop and maintain project budgets, cost plans, and forecasts., • Monitor actual costs, commitments, accruals, and expenditures against approved budgets., • Use SAP to create, maintain, and analyse cost data, purchase orders, commitments, and project transactions., • Prepare monthly cost reports, variance analysis, and cost forecasts., • Support project managers with cost-control information and financial decision making., • Track committed and actual costs and ensure accurate cost coding., • Review purchase orders, invoices, goods receipts, and subcontractor costs., • Coordinate with procurement and finance teams to resolve cost discrepancies., • Support change management and assess the cost impact of project variations., • Assist with budgeting, annual planning, and estimate-at-completion (EAC) calculations., • Ensure compliance with company cost-control procedures and SAP processes, • Prepare detailed and accurate cost reports, including executive-level dashboards that summarise financial performance for stakeholders. Change Management & Governance • Lead the change control process, evaluating the cost impact of scope changes and variations and ensuring approvals are obtained., • Work with procurement to align purchase orders with the cost structure, ensure timely ordering of materials, and validate supply chain data., • Support contract management activities, including validating contractor payment applications and ensuring alignment with contract terms, • Embed a culture of good governance, ensuring all financial data complies with project policies and is audit-ready. Required Qualifications & Skills Experience & Education • Bachelor's degree in Engineering, Quantity Surveying, Construction Management, Finance, Economics, or a related field., • Proven experience (typically 5+ years) in cost engineering, cost control, or project controls roles on large-scale projects in sectors like construction, infrastructure, energy, or manufacturing., • Strong practical experience with SAP, preferably SAP CO, PS & MM, • Good understanding of project cost control, budgeting, forecasting, and variance analysis., • Experience working with purchase orders, commitments, accruals, invoices, and actual costs., • Strong Excel skills, including pivot tables, lookups, and financial analysis., • Excellent analytical and problem-solving skills., • Ability to work with project, procurement, finance, and commercial teams., • Strong attention to detail and ability to manage deadlines., • Experience with CAPEX projects, stage-gate governance, and understanding of the project lifecycle is highly desirable., • Technical Skills, • Advanced skills in Microsoft Excel and experience with project controls software (e.g., SAP) and reporting tools (e.g., Power BI)., • Deep understanding of cost engineering principles, Earned Value Management (EVM), forecasting techniques, and change management processes., • Knowledge of SAP Project Systems (SAP PS) and Controlling (SAP CO)., • Strong analytical, critical thinking, and problem-solving skills with a high attention to detail. Soft Skills: • Excellent verbal and written communication skills to convey complex financial information clearly to both technical and non-technical audiences., • Ability to work effectively within a multi-disciplinary team and influence stakeholders, including contractors and clients., • Demonstrated leadership and organizational skills to manage multiple tasks and meet deadlines. Certifications: Professional certifications are a significant plus, such as AACE (Certified Cost Professional), CIMA, ACCA, RICS, or APM. Company Description: OTIFYD is a next-generation Operational Technology (OT) cybersecurity company dedicated to safeguarding industrial environments and enabling safe, secure, and resilient operations. Drawing on decades of experience across IT and OT, OTIFYD supports critical infrastructure sectors such as power and electricity, water utilities, oil and gas, energy, and manufacturing in building defensible networks. The company operates at the intersection of Industry 4.0 and 5.0, where humans collaborate with advanced technologies including AI, 5G, IIoT, and intelligent edge solutions. OTIFYD’s services and solutions focus on preventing malicious interference with industrial processes and deploying layered controls that address complex global cyber challenges. The organization continues to expand its impact as connected devices and data reshape the future of OT security.

About the Job At GeneMind, we are advancing global precision medicine and scientific discovery through innovative next-generation sequencing (NGS) technology, breaking barriers to deliver reliable, high-performance genomic solutions to laboratories, hospitals, and research institutions across the world. Our Field Service Engineers are the frontline technical ambassadors of GeneMind, building trusted customer relationships, ensuring maximum instrument uptime, and turning technical expertise into tangible customer success. Working here means joining a mission-driven, fast-growing team where your hands-on skills directly shape the progress of genomics. Surrounded by cutting-edge technology, collaborative colleagues, and meaningful work, you will grow professionally, solve impactful challenges, and build a rewarding career in one of the most dynamic industries today. Position Summary Field Service Engineer Reporting to the Service Manager, the Field Service Engineer will own end-to-end on-site and remote service delivery for GeneMind’s high-precision sequencing instruments. This is a customer-centric, hands-on technical role encompassing installation, commissioning, preventive maintenance, hardware troubleshooting, repair, and technical training. You will be responsible for sustaining optimal instrument performance, driving high customer satisfaction, and supporting the reliable operation of genomic testing and research workflows—this is not purely a desk-based role, but a dynamic position requiring field execution and technical problem-solving. Key Measures Of Success • On-time instrument installation & commissioning with zero critical post-installation defects, • High instrument uptime & fast resolution of hardware-related technical faults, • Strong customer satisfaction scores and long-term customer loyalty, • Effective knowledge transfer to distributor service teams and end-user technicians, • Accurate & compliant service documentation, including maintenance records and repair reports, • Proactive preventive maintenance execution to minimize unplanned downtime Position Responsibilities • Prepare comprehensive materials, documentation, and packaging for instrument installation, on-site commissioning, and after-sales maintenance, ensuring full readiness for all service activities., • Evaluate required supplies, components, and checklists for product demonstrations, coordinate preparation efforts, and follow through to guarantee flawless demo execution., • Deliver responsive hardware technical support and maintenance services for customers post-sale, conducting both on-site and remote troubleshooting to resolve malfunctions efficiently., • Design and deliver structured technical training for distributor Field Service Engineers and customer laboratory staff, building their capability to operate and maintain instruments independently., • Perform routine on-site inspections to assess instrument operating status, proactively identify potential issues, and assist customers in maintaining consistent, reliable instrument performance., • Maintain detailed, accurate service records, project documents, and technical reports in compliance with company policies and quality management standards., • Collaborate cross-functionally with sales, application, and R&D teams to share customer feedback, resolve complex technical issues, and improve overall product reliability and customer experience. Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs. Position Requirements • Bachelor’s degree or above in Automation, Electronics, Electrical Engineering, Semiconductor, Mechatronics, or related technical disciplines., • 3+ years of hands-on hardware maintenance experience in medical devices, precision analytical instruments, or life science equipment., • Proficiency in instrument assembly, disassembly, circuit troubleshooting, mechanical calibration, and hardware fault resolution for high-precision equipment., • Excellent verbal communication skills, with the ability to draft clear, compliant project documents, service reports, and technical records independently., • Strong learning agility and adaptability, with the ability to quickly master complex genomic sequencing instruments and emerging technical knowledge., • Good oral English proficiency; fluent English skills are highly preferred to support global customers and cross-regional collaboration., • Willing and able to travel frequently domestically and internationally as required to fulfill service obligations., • Customer-focused mindset, strong sense of responsibility, attention to detail, and professional work ethic with a commitment to quality service. All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities. Preferred Experience & Skills • Prior experience servicing NGS sequencers, PCR instruments, or other laboratory genomic/analytical equipment is strongly preferred., • Experience delivering technical training, supporting distributor service teams, or managing multi-site service operations., • Familiarity with medical device quality systems, including ISO13485, GMP, or relevant regulatory compliance standards., • Advanced hands-on expertise with electrical, mechanical, and optical components of precision laboratory instruments., • Experience supporting global customers or cross-cultural technical collaboration., • Proactive problem-solving skills and ability to work independently with minimal supervision in field settings. Who We Are GeneMind is a leading global innovator and manufacturer of next-generation sequencing (NGS) systems, powered by independent core intellectual property. We develop and deliver high-performance, reliable sequencing solutions to empower precision medicine, scientific research, and public health initiatives worldwide. We are deeply committed to fostering an inclusive, supportive workplace that values diversity, professional growth, and collaborative innovation. We prioritize employee development, encourage curiosity, and empower every team member to make a meaningful impact on our mission to advance genomic technology for global health equity. Equal Opportunity Employer: We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide equal employment opportunities without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

About the Job At GeneMind, we are advancing global precision medicine and scientific discovery through innovative next-generation sequencing (NGS) technology, breaking barriers to deliver reliable, high-performance genomic solutions to laboratories, hospitals, and research institutions across the world. Our Field Service Engineers are the frontline technical ambassadors of GeneMind, building trusted customer relationships, ensuring maximum instrument uptime, and turning technical expertise into tangible customer success. Working here means joining a mission-driven, fast-growing team where your hands-on skills directly shape the progress of genomics. Surrounded by cutting-edge technology, collaborative colleagues, and meaningful work, you will grow professionally, solve impactful challenges, and build a rewarding career in one of the most dynamic industries today. Position Summary Field Service Engineer Reporting to the Service Manager, the Field Service Engineer will own end-to-end on-site and remote service delivery for GeneMind’s high-precision sequencing instruments. This is a customer-centric, hands-on technical role encompassing installation, commissioning, preventive maintenance, hardware troubleshooting, repair, and technical training. You will be responsible for sustaining optimal instrument performance, driving high customer satisfaction, and supporting the reliable operation of genomic testing and research workflows—this is not purely a desk-based role, but a dynamic position requiring field execution and technical problem-solving. Key Measures Of Success • On-time instrument installation & commissioning with zero critical post-installation defects, • High instrument uptime & fast resolution of hardware-related technical faults, • Strong customer satisfaction scores and long-term customer loyalty, • Effective knowledge transfer to distributor service teams and end-user technicians, • Accurate & compliant service documentation, including maintenance records and repair reports, • Proactive preventive maintenance execution to minimize unplanned downtime Position Responsibilities • Prepare comprehensive materials, documentation, and packaging for instrument installation, on-site commissioning, and after-sales maintenance, ensuring full readiness for all service activities., • Evaluate required supplies, components, and checklists for product demonstrations, coordinate preparation efforts, and follow through to guarantee flawless demo execution., • Deliver responsive hardware technical support and maintenance services for customers post-sale, conducting both on-site and remote troubleshooting to resolve malfunctions efficiently., • Design and deliver structured technical training for distributor Field Service Engineers and customer laboratory staff, building their capability to operate and maintain instruments independently., • Perform routine on-site inspections to assess instrument operating status, proactively identify potential issues, and assist customers in maintaining consistent, reliable instrument performance., • Maintain detailed, accurate service records, project documents, and technical reports in compliance with company policies and quality management standards., • Collaborate cross-functionally with sales, application, and R&D teams to share customer feedback, resolve complex technical issues, and improve overall product reliability and customer experience. Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs. Position Requirements • Bachelor’s degree or above in Automation, Electronics, Electrical Engineering, Semiconductor, Mechatronics, or related technical disciplines., • 3+ years of hands-on hardware maintenance experience in medical devices, precision analytical instruments, or life science equipment., • Proficiency in instrument assembly, disassembly, circuit troubleshooting, mechanical calibration, and hardware fault resolution for high-precision equipment., • Excellent verbal communication skills, with the ability to draft clear, compliant project documents, service reports, and technical records independently., • Strong learning agility and adaptability, with the ability to quickly master complex genomic sequencing instruments and emerging technical knowledge., • Good oral English proficiency; fluent English skills are highly preferred to support global customers and cross-regional collaboration., • Willing and able to travel frequently domestically and internationally as required to fulfill service obligations., • Customer-focused mindset, strong sense of responsibility, attention to detail, and professional work ethic with a commitment to quality service. All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities. Preferred Experience & Skills • Prior experience servicing NGS sequencers, PCR instruments, or other laboratory genomic/analytical equipment is strongly preferred., • Experience delivering technical training, supporting distributor service teams, or managing multi-site service operations., • Familiarity with medical device quality systems, including ISO13485, GMP, or relevant regulatory compliance standards., • Advanced hands-on expertise with electrical, mechanical, and optical components of precision laboratory instruments., • Experience supporting global customers or cross-cultural technical collaboration., • Proactive problem-solving skills and ability to work independently with minimal supervision in field settings. Who We Are GeneMind is a leading global innovator and manufacturer of next-generation sequencing (NGS) systems, powered by independent core intellectual property. We develop and deliver high-performance, reliable sequencing solutions to empower precision medicine, scientific research, and public health initiatives worldwide. We are deeply committed to fostering an inclusive, supportive workplace that values diversity, professional growth, and collaborative innovation. We prioritize employee development, encourage curiosity, and empower every team member to make a meaningful impact on our mission to advance genomic technology for global health equity. Equal Opportunity Employer: We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide equal employment opportunities without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Overview In this role you contribute to the development of mobility and energy solutions by steering systems engineering across requirements, architecture, integration, and validation. You will join an international, multidisciplinary team to deliver state-of-the-art vehicle systems. You will shape technical solutions and lead system development within a domain, driving robust verification and continuous improvement. This is an opportunity to influence the performance and integration of powertrain and related vehicle systems at AVL. Compensaciones / Beneficios • Competitive salary, • Private health insurance, • Life insurance, • Flexible compensation package, • International, technology-driven work environment, • Professional development plan and growth opportunities Responsabilidades, • Define and manage system requirements aligned with customer objectives, • Design technical solutions and architectures for complex products, • Coordinate system integration, calibration, verification and validation activities, • Collaborate with customers, suppliers and cross-functional teams to drive project success, • Act as technical lead within a development domain or project, • Support test planning, test cases and validation strategies, • Analyze test results, troubleshoot deviations and support problem resolution, • Ensure compliance with industry standards and quality processes, • Prepare technical documentation and release content, • Contribute to project planning, milestones and quality gates, • Perform performance analysis and optimization of vehicle and system functions, • Stay current with new technologies and MBSE/dev tools Requisitos principales, • Bachelor's degree in Automotive Engineering, Electrical Engineering, Mechanical Engineering, Mechatronics or related field, • Knowledge of systems engineering principles and modern product development methodologies, • Strong understanding of at least one vehicle system or technology domain, • Basic knowledge of different vehicle systems and their interactions, • Understanding of in-vehicle communication networks, • Experience with requirements engineering tools, • Knowledge of systems engineering tools and development toolchains, • Good understanding of lifecycle management and engineering work products, • Analytical mindset with strong problem-solving skills, • Excellent communication and teamwork abilities, • Fluent English and Spanish (written and spoken), • Excellent communication and teamwork, • Analytical mindset, • Strong problem-solving, • Systems engineering principles, • Requirements engineering tools, • MBSE (Model-Based Systems Engineering)

Overview In this role you contribute to the development of mobility and energy solutions by steering systems engineering across requirements, architecture, integration, and validation. You will join an international, multidisciplinary team to deliver state-of-the-art vehicle systems. You will shape technical solutions and lead system development within a domain, driving robust verification and continuous improvement. This is an opportunity to influence the performance and integration of powertrain and related vehicle systems at AVL. Compensaciones / Beneficios • Competitive salary, • Private health insurance, • Life insurance, • Flexible compensation package, • International, technology-driven work environment, • Professional development plan and growth opportunities Responsabilidades, • Define and manage system requirements aligned with customer objectives, • Design technical solutions and architectures for complex products, • Coordinate system integration, calibration, verification and validation activities, • Collaborate with customers, suppliers and cross-functional teams to drive project success, • Act as technical lead within a development domain or project, • Support test planning, test cases and validation strategies, • Analyze test results, troubleshoot deviations and support problem resolution, • Ensure compliance with industry standards and quality processes, • Prepare technical documentation and release content, • Contribute to project planning, milestones and quality gates, • Perform performance analysis and optimization of vehicle and system functions, • Stay current with new technologies and MBSE/dev tools Requisitos principales, • Bachelor's degree in Automotive Engineering, Electrical Engineering, Mechanical Engineering, Mechatronics or related field, • Knowledge of systems engineering principles and modern product development methodologies, • Strong understanding of at least one vehicle system or technology domain, • Basic knowledge of different vehicle systems and their interactions, • Understanding of in-vehicle communication networks, • Experience with requirements engineering tools, • Knowledge of systems engineering tools and development toolchains, • Good understanding of lifecycle management and engineering work products, • Analytical mindset with strong problem-solving skills, • Excellent communication and teamwork abilities, • Fluent English and Spanish (written and spoken), • Excellent communication and teamwork, • Analytical mindset, • Strong problem-solving, • Systems engineering principles, • Requirements engineering tools, • MBSE (Model-Based Systems Engineering)

Junior AI Engineer (Financial Intelligence) Location: Donostia Join Our Team at Whitehole Whitehole is a Family Office focused on investment excellence.We actively manage (a) a diverse portfolio of equities, alternative assets, and hedging strategies, and (b) a select group of local companies where

Position Overview: We are seeking a EU/UK based, detail-oriented and analytical Cost Engineer to join our Project Controls team. The role requires strong experience with SAP, particularly in cost management, purchase orders, commitments, actual costs, budgets, and financial reporting. The Cost Engineer works closely with project managers, procurement, finance, engineering, and commercial teams to ensure accurate and timely cost control. Key Responsibilities: • Budgeting & Cost Control & Reporting, • Develop and maintain project budgets, cost plans, and forecasts., • Monitor actual costs, commitments, accruals, and expenditures against approved budgets., • Use SAP to create, maintain, and analyse cost data, purchase orders, commitments, and project transactions., • Prepare monthly cost reports, variance analysis, and cost forecasts., • Support project managers with cost-control information and financial decision making., • Track committed and actual costs and ensure accurate cost coding., • Review purchase orders, invoices, goods receipts, and subcontractor costs., • Coordinate with procurement and finance teams to resolve cost discrepancies., • Support change management and assess the cost impact of project variations., • Assist with budgeting, annual planning, and estimate-at-completion (EAC) calculations., • Ensure compliance with company cost-control procedures and SAP processes, • Prepare detailed and accurate cost reports, including executive-level dashboards that summarise financial performance for stakeholders. Change Management & Governance • Lead the change control process, evaluating the cost impact of scope changes and variations and ensuring approvals are obtained., • Work with procurement to align purchase orders with the cost structure, ensure timely ordering of materials, and validate supply chain data., • Support contract management activities, including validating contractor payment applications and ensuring alignment with contract terms, • Embed a culture of good governance, ensuring all financial data complies with project policies and is audit-ready. Required Qualifications & Skills Experience & Education • Bachelor's degree in Engineering, Quantity Surveying, Construction Management, Finance, Economics, or a related field., • Proven experience (typically 5+ years) in cost engineering, cost control, or project controls roles on large-scale projects in sectors like construction, infrastructure, energy, or manufacturing., • Strong practical experience with SAP, preferably SAP CO, PS & MM, • Good understanding of project cost control, budgeting, forecasting, and variance analysis., • Experience working with purchase orders, commitments, accruals, invoices, and actual costs., • Strong Excel skills, including pivot tables, lookups, and financial analysis., • Excellent analytical and problem-solving skills., • Ability to work with project, procurement, finance, and commercial teams., • Strong attention to detail and ability to manage deadlines., • Experience with CAPEX projects, stage-gate governance, and understanding of the project lifecycle is highly desirable., • Technical Skills, • Advanced skills in Microsoft Excel and experience with project controls software (e.g., SAP) and reporting tools (e.g., Power BI)., • Deep understanding of cost engineering principles, Earned Value Management (EVM), forecasting techniques, and change management processes., • Knowledge of SAP Project Systems (SAP PS) and Controlling (SAP CO)., • Strong analytical, critical thinking, and problem-solving skills with a high attention to detail. Soft Skills: • Excellent verbal and written communication skills to convey complex financial information clearly to both technical and non-technical audiences., • Ability to work effectively within a multi-disciplinary team and influence stakeholders, including contractors and clients., • Demonstrated leadership and organizational skills to manage multiple tasks and meet deadlines. Certifications: Professional certifications are a significant plus, such as AACE (Certified Cost Professional), CIMA, ACCA, RICS, or APM. Company Description: OTIFYD is a next-generation Operational Technology (OT) cybersecurity company dedicated to safeguarding industrial environments and enabling safe, secure, and resilient operations. Drawing on decades of experience across IT and OT, OTIFYD supports critical infrastructure sectors such as power and electricity, water utilities, oil and gas, energy, and manufacturing in building defensible networks. The company operates at the intersection of Industry 4.0 and 5.0, where humans collaborate with advanced technologies including AI, 5G, IIoT, and intelligent edge solutions. OTIFYD’s services and solutions focus on preventing malicious interference with industrial processes and deploying layered controls that address complex global cyber challenges. The organization continues to expand its impact as connected devices and data reshape the future of OT security.

¿Te interesaría seguir desarrollándote como Ingeniero/a de Automatización y Control SCADA en una compañía multinacional líder en el ámbito de la digitalización energética, automatización industrial y gestión inteligente de infraestructuras críticas, participando en proyectos internacionales de gran impacto con oportunidades de crecimiento y una cultura enfocada en inclusión y desarrollo profesional? Desde Oxigent Technologies seleccionamos un/a SCADA Engineer para participar en proyectos de automatización y control de subestaciones eléctricas de alta tensión dentro de una organización líder a nivel global, reconocida por su apuesta por la innovación, la sostenibilidad y el desarrollo tecnológico, trabajando 100% en remoto (con 30% viajes alrededor de España). ¿Cuáles serán tus funciones principales? • Diseñar, desarrollar e implementar sistemas de automatización y control para subestaciones de media tensión, garantizando el cumplimiento de los estándares técnicos y de calidad., • Configurar, programar y poner en marcha sistemas SCADA, • Configurar y diagnosticar redes de comunicación industrial mediante protocolos como IP/Ethernet, Profinet, Modbus (RTU/TCP-IP), OPC UA e IEC61850., • Elaborar documentación técnica, incluyendo especificaciones de diseño, planos, manuales operativos y protocolos de pruebas., • Colaborar con equipos multidisciplinares e internacionales, participando en proyectos con alcance global y clientes de primer nivel., • Realizar pruebas en FAT y SAT, asegurando la correcta integración y funcionamiento de los sistemas., • Gestionar actividades de mantenimiento, soporte técnico y resolución de incidencias en instalaciones existentes., • Supervisar la instalación y puesta en marcha de equipos, coordinando actividades con diferentes interlocutores técnicos. Para ello, ¿qué vas a necesitar? • Titulación en Ingeniería Eléctrica, Electrónica, Automatización, Telecomunicaciones o similar., • Entre 5 y 10 años de experiencia en proyectos de automatización y control industrial., • Experiencia demostrable con sistemas SCADA e Ignition Scada, • Certificación "Ignition Gold Certification" (Imprescindible); o por lo menos la Core certification, • Conocimientos avanzados en redes industriales y protocolos de comunicación: IP/Ethernet, Profinet, Modbus (RTU/TCP-IP), OPC UA, IE e IEC61850., • Experiencia en programación y configuración de sistemas de automatización industrial., • Capacidad para interpretar planos eléctricos y diagramas unifilares., • Nivel de inglés B2-C1, imprescindible para colaborar en entornos internacionales. ¿Qué te ofrecemos? • Contratación indefinida a través de Oxigent., • Salario acorde a la experiencia aportada (hasta 58.000 € b/a), • Horario flexible, • 100% remoto desde cualquier lugar de España (30-40% viajes por Europa), • Cheque Formación para desarrollarte en las áreas profesionales que más te interesen., • Seguro médico privado., • Retribución flexible aplicable a seguro médico, restaurante, transporte, guardería y formación., • Aplicación de acceso a gimnasios y actividades deportivas en toda España con descuentos., • ¡Y muchos otros beneficios! ¡Únete al equipo de Oxigent! Empresa comprometida con la sostenibilidad y la igualdad de oportunidades, donde el talento y la tecnología no entienden de género.

About the Job At GeneMind, we are advancing global precision medicine and scientific discovery through innovative next-generation sequencing (NGS) technology, breaking barriers to deliver reliable, high-performance genomic solutions to laboratories, hospitals, and research institutions across the world. Our Field Service Engineers are the frontline technical ambassadors of GeneMind, building trusted customer relationships, ensuring maximum instrument uptime, and turning technical expertise into tangible customer success. Working here means joining a mission-driven, fast-growing team where your hands-on skills directly shape the progress of genomics. Surrounded by cutting-edge technology, collaborative colleagues, and meaningful work, you will grow professionally, solve impactful challenges, and build a rewarding career in one of the most dynamic industries today. Position Summary Field Service Engineer Reporting to the Service Manager, the Field Service Engineer will own end-to-end on-site and remote service delivery for GeneMind’s high-precision sequencing instruments. This is a customer-centric, hands-on technical role encompassing installation, commissioning, preventive maintenance, hardware troubleshooting, repair, and technical training. You will be responsible for sustaining optimal instrument performance, driving high customer satisfaction, and supporting the reliable operation of genomic testing and research workflows—this is not purely a desk-based role, but a dynamic position requiring field execution and technical problem-solving. Key Measures Of Success • On-time instrument installation & commissioning with zero critical post-installation defects, • High instrument uptime & fast resolution of hardware-related technical faults, • Strong customer satisfaction scores and long-term customer loyalty, • Effective knowledge transfer to distributor service teams and end-user technicians, • Accurate & compliant service documentation, including maintenance records and repair reports, • Proactive preventive maintenance execution to minimize unplanned downtime Position Responsibilities • Prepare comprehensive materials, documentation, and packaging for instrument installation, on-site commissioning, and after-sales maintenance, ensuring full readiness for all service activities., • Evaluate required supplies, components, and checklists for product demonstrations, coordinate preparation efforts, and follow through to guarantee flawless demo execution., • Deliver responsive hardware technical support and maintenance services for customers post-sale, conducting both on-site and remote troubleshooting to resolve malfunctions efficiently., • Design and deliver structured technical training for distributor Field Service Engineers and customer laboratory staff, building their capability to operate and maintain instruments independently., • Perform routine on-site inspections to assess instrument operating status, proactively identify potential issues, and assist customers in maintaining consistent, reliable instrument performance., • Maintain detailed, accurate service records, project documents, and technical reports in compliance with company policies and quality management standards., • Collaborate cross-functionally with sales, application, and R&D teams to share customer feedback, resolve complex technical issues, and improve overall product reliability and customer experience. Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs. Position Requirements • Bachelor’s degree or above in Automation, Electronics, Electrical Engineering, Semiconductor, Mechatronics, or related technical disciplines., • 3+ years of hands-on hardware maintenance experience in medical devices, precision analytical instruments, or life science equipment., • Proficiency in instrument assembly, disassembly, circuit troubleshooting, mechanical calibration, and hardware fault resolution for high-precision equipment., • Excellent verbal communication skills, with the ability to draft clear, compliant project documents, service reports, and technical records independently., • Strong learning agility and adaptability, with the ability to quickly master complex genomic sequencing instruments and emerging technical knowledge., • Good oral English proficiency; fluent English skills are highly preferred to support global customers and cross-regional collaboration., • Willing and able to travel frequently domestically and internationally as required to fulfill service obligations., • Customer-focused mindset, strong sense of responsibility, attention to detail, and professional work ethic with a commitment to quality service. All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional tasks and responsibilities. Preferred Experience & Skills • Prior experience servicing NGS sequencers, PCR instruments, or other laboratory genomic/analytical equipment is strongly preferred., • Experience delivering technical training, supporting distributor service teams, or managing multi-site service operations., • Familiarity with medical device quality systems, including ISO13485, GMP, or relevant regulatory compliance standards., • Advanced hands-on expertise with electrical, mechanical, and optical components of precision laboratory instruments., • Experience supporting global customers or cross-cultural technical collaboration., • Proactive problem-solving skills and ability to work independently with minimal supervision in field settings. Who We Are GeneMind is a leading global innovator and manufacturer of next-generation sequencing (NGS) systems, powered by independent core intellectual property. We develop and deliver high-performance, reliable sequencing solutions to empower precision medicine, scientific research, and public health initiatives worldwide. We are deeply committed to fostering an inclusive, supportive workplace that values diversity, professional growth, and collaborative innovation. We prioritize employee development, encourage curiosity, and empower every team member to make a meaningful impact on our mission to advance genomic technology for global health equity. Equal Opportunity Employer: We celebrate diversity and are committed to creating an inclusive environment for all employees. We provide equal employment opportunities without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Responsibilities: 1. Serve as the primary technical expert for our Power Conversion System (PCS) and energy storage solutions, engaging directly with clients and sales teams., 2. Analyze customer requirements and design competitive, tailored technical proposals and system schematics for energy storage projects., 3. Lead the technical preparation for bids and tenders, ensuring high-quality and compliant submissions., 4. Conduct market and competitor analysis to provide insights for strategy and product positioning in the market., 5. Act as the key technical liaison between Sales, R&D, and Project Delivery teams throughout the sales cycle., 6. Provide technical training and support to sales staff, partners, and key clients., 7. Represent the company at industry events and conferences to promote technical expertise and solutions. Requirements: 1.Bachelor's degree or higher in Electrical Engineering, Power Electronics, or a related field. 2.Minimum 3 years of experience in a pre-sales, technical support role within energy storage PCS. 3.Solid understanding of Battery Energy Storage Systems (BESS) applications and standards. 4.Full professional proficiency in English (written and spoken) is mandatory. 5.Excellent communication, presentation, and interpersonal skills. 6.Self-motivated, results-oriented, and willing to undertake frequent travel.

• Role: Cloud Solutions Architect (Hybrid), • Location: Remote Role Overview: We are hiring for one of our clients to design and implement cloud infrastructure solutions. The role requires expertise in cloud architecture and platform management to support business-critical systems. Key Responsibilities: • Design, deploy, and optimize cloud infrastructure on public cloud platforms., • Develop and maintain cloud architecture blueprints and migration strategies., • Lead the evaluation and adoption of cloud-native technologies and services., • Collaborate with cross-functional teams to ensure alignment with business objectives., • Implement security, compliance, and governance frameworks for cloud environments. Required Skills & Qualifications: • Cloud architecture design and implementation experience., • Proficiency in cloud platforms such as AWS, Azure, or Google Cloud., • Experience with infrastructure as code (IaC) tools like Terraform or CloudFormation., • Knowledge of containerization and orchestration (e.g., Kubernetes, Docker)., • Familiarity with CI/CD pipelines and DevOps practices., • Strong understanding of networking, security, and compliance requirements., • Ability to analyze performance metrics and optimize cloud costs. More About the Opportunity: This role offers a unique opportunity to work with a global leader in the Technology, Information and Internet industry, contributing to scalable and secure cloud solutions. The engagement includes exposure to cutting-edge cloud technologies and industry best practices. Equal Opportunity Employer: We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications. Apply Now!

Newton Colmore Consulting is partnering with a venture-backed deep tech company to develop novel intelligent systems. The Machine Learning Engineer will own advanced modelling, ML and predictive analytics across product platforms, tackling challenging problems with autonomy and leadership exposure. You will join a talented team of scientists and engineers, shaping technology strategy while turning complex data into practical insights and actionable forecasts. #J-18808-Ljbffr

¿Te interesaría seguir desarrollándote como Ingeniero/a de Automatización y Control SCADA en una compañía multinacional líder en el ámbito de la digitalización energética, automatización industrial y gestión inteligente de infraestructuras críticas, participando en proyectos internacionales de gran impacto con oportunidades de crecimiento y una cultura enfocada en inclusión y desarrollo profesional? Desde Oxigent Technologies seleccionamos un/a SCADA Engineer para participar en proyectos de automatización y control de subestaciones eléctricas de alta tensión dentro de una organización líder a nivel global, reconocida por su apuesta por la innovación, la sostenibilidad y el desarrollo tecnológico, trabajando 100% en remoto (con 30% viajes alrededor de España). ¿Cuáles serán tus funciones principales? • Diseñar, desarrollar e implementar sistemas de automatización y control para subestaciones de media tensión, garantizando el cumplimiento de los estándares técnicos y de calidad., • Configurar, programar y poner en marcha sistemas SCADA, • Configurar y diagnosticar redes de comunicación industrial mediante protocolos como IP/Ethernet, Profinet, Modbus (RTU/TCP-IP), OPC UA e IEC61850., • Elaborar documentación técnica, incluyendo especificaciones de diseño, planos, manuales operativos y protocolos de pruebas., • Colaborar con equipos multidisciplinares e internacionales, participando en proyectos con alcance global y clientes de primer nivel., • Realizar pruebas en FAT y SAT, asegurando la correcta integración y funcionamiento de los sistemas., • Gestionar actividades de mantenimiento, soporte técnico y resolución de incidencias en instalaciones existentes., • Supervisar la instalación y puesta en marcha de equipos, coordinando actividades con diferentes interlocutores técnicos. Para ello, ¿qué vas a necesitar? • Titulación en Ingeniería Eléctrica, Electrónica, Automatización, Telecomunicaciones o similar., • Entre 5 y 10 años de experiencia en proyectos de automatización y control industrial., • Experiencia demostrable con sistemas SCADA e Ignition Scada, • Certificación "Ignition Gold Certification" (Imprescindible); o por lo menos la Core certification, • Conocimientos avanzados en redes industriales y protocolos de comunicación: IP/Ethernet, Profinet, Modbus (RTU/TCP-IP), OPC UA, IE e IEC61850., • Experiencia en programación y configuración de sistemas de automatización industrial., • Capacidad para interpretar planos eléctricos y diagramas unifilares., • Nivel de inglés B2-C1, imprescindible para colaborar en entornos internacionales. ¿Qué te ofrecemos? • Contratación indefinida a través de Oxigent., • Salario acorde a la experiencia aportada (hasta 58.000 € b/a), • Horario flexible, • 100% remoto desde cualquier lugar de España (30-40% viajes por Europa), • Cheque Formación para desarrollarte en las áreas profesionales que más te interesen., • Seguro médico privado., • Retribución flexible aplicable a seguro médico, restaurante, transporte, guardería y formación., • Aplicación de acceso a gimnasios y actividades deportivas en toda España con descuentos., • ¡Y muchos otros beneficios! ¡Únete al equipo de Oxigent! Empresa comprometida con la sostenibilidad y la igualdad de oportunidades, donde el talento y la tecnología no entienden de género.

Position Overview We are seeking a Software & Hardware Field Service Engineer based in Spain with strong capabilities in software, hardware, and field technical service. This position will be responsible for the installation, commissioning, technical support, troubleshooting, and after-sales service of the company’s medical devices across Europe, while also serving as a key technical interface between European customers/field teams and the R&D team in China. The role requires strong software development and troubleshooting capabilities, as well as a solid understanding of medical device hardware, electrical systems, motion control, communication interfaces, and system integration. The successful candidate should be capable of independently completing equipment installation, commissioning, and technical troubleshooting at customer sites. As this position involves frequent communication with the China R&D team and customers across Spain and other European markets, fluency in Chinese and English is required. Spanish language capability is preferred. Key Responsibilities 1. Equipment Installation & Field Technical Support • Responsible for the onsite installation, commissioning, acceptance, and technical support of the company’s medical devices in Spain and other European countries., • Independently complete software and hardware configuration, system testing, calibration, and functional verification following equipment installation., • Diagnose and resolve software, hardware, communication, and equipment operation issues occurring at customer sites., • Provide remote and onsite after-sales technical support as required to ensure reliable operation of customer equipment. 1. Software Development & Maintenance • Participate in the design, development, maintenance, and continuous improvement of medical device software on Windows/Linux platforms., • Develop and maintain application software using C++, Qt/QML, and related technologies., • Perform software troubleshooting, debugging, testing, and improvements based on field and customer feedback., • Conduct unit testing, static code analysis, local builds, log analysis, and software troubleshooting. 1. Software & Hardware System Integration • Lead or support system integration and debugging between medical device software and hardware., • Understand and troubleshoot issues related to PLCs, motion control cards, CAN Bus, sensors, motors, and other equipment control modules., • Identify whether field issues originate from software, hardware, electrical, communication, or mechanical systems, and coordinate with relevant teams to achieve timely resolution., • Support the R&D team with equipment upgrades, software version updates, and onsite validation. 1. Technical Communication & Issue Resolution • Serve as the technical interface between European customers/field teams and the China R&D team, accurately collecting, analyzing, and communicating field technical issues., • Translate customer-site issues into clear technical requirements, problem descriptions, and improvement recommendations., • Collaborate with software, hardware, R&D, and product teams in China to follow technical issues through to closure., • Conduct root cause analysis of recurring or systemic issues and recommend product or process improvements. 1. Technical Documentation & Compliance • Perform technical activities in accordance with the company’s software development, quality management, and medical device-related procedures., • Prepare and maintain installation records, maintenance records, failure analysis reports, test reports, technical documentation, and customer service records., • Support product upgrades, CAPA activities, complaint investigations, and other quality-system-related technical activities. 1. Customer Training & European Regional Support • Provide equipment operation, basic maintenance, and troubleshooting training to customers, distributors, and internal teams as required., • Support customer field service activities in Spain and other European countries., • Travel throughout Europe based on business needs. Qualifications & Requirements • Bachelor’s degree or above in Computer Science, Software Engineering, Electronic Engineering, Automation, Mechatronics, Biomedical Engineering, or a related discipline., • At least 5 years of experience in software, medical devices, automation equipment, or a related technical field. Medical device industry experience is preferred., • Proficiency in C++ and Qt/QML, with practical experience in software development, debugging, and maintenance., • Familiarity with Windows/Linux environments, with the ability to independently perform software installation, configuration, log analysis, and troubleshooting., • Strong combined software and hardware technical capabilities, with an understanding of equipment hardware architecture, electrical systems, sensors, motion control, and equipment communications., • Familiarity with one or more industrial communication and control technologies, including:, • PLC, • Motion control cards, • CAN Bus, • Serial Communication, • TCP/IP, • USB and other equipment communication interfaces, • Knowledge of medical device automation, machine vision, and OpenCV is preferred., • Experience in equipment installation, commissioning, maintenance, or Field Service, with the ability to independently resolve technical issues at customer sites., • Strong analytical and troubleshooting skills, with the ability to quickly identify whether an issue relates to software, hardware, communications, electrical systems, or other system modules., • Language Requirements:, • Chinese: Fluent; able to communicate professionally and technically with the China R&D and management teams., • English: Fluent; able to use English as the primary written and spoken working language across the European region., • Spanish: Preferred; the ability to communicate with Spanish customers in technical discussions and training is an advantage., • Strong customer communication, teamwork, and service-oriented skills, with the ability to work independently and take ownership of field issue resolution., • Willingness and ability to travel throughout Spain and Europe for customer-site equipment installation, maintenance, upgrades, and training.

Position Overview We are seeking a Software & Hardware Field Service Engineer based in Spain with strong capabilities in software, hardware, and field technical service. This position will be responsible for the installation, commissioning, technical support, troubleshooting, and after-sales service of the company’s medical devices across Europe, while also serving as a key technical interface between European customers/field teams and the R&D team in China. The role requires strong software development and troubleshooting capabilities, as well as a solid understanding of medical device hardware, electrical systems, motion control, communication interfaces, and system integration. The successful candidate should be capable of independently completing equipment installation, commissioning, and technical troubleshooting at customer sites. As this position involves frequent communication with the China R&D team and customers across Spain and other European markets, fluency in Chinese and English is required. Spanish language capability is preferred. Key Responsibilities 1. Equipment Installation & Field Technical Support • Responsible for the onsite installation, commissioning, acceptance, and technical support of the company’s medical devices in Spain and other European countries., • Independently complete software and hardware configuration, system testing, calibration, and functional verification following equipment installation., • Diagnose and resolve software, hardware, communication, and equipment operation issues occurring at customer sites., • Provide remote and onsite after-sales technical support as required to ensure reliable operation of customer equipment. 1. Software Development & Maintenance • Participate in the design, development, maintenance, and continuous improvement of medical device software on Windows/Linux platforms., • Develop and maintain application software using C++, Qt/QML, and related technologies., • Perform software troubleshooting, debugging, testing, and improvements based on field and customer feedback., • Conduct unit testing, static code analysis, local builds, log analysis, and software troubleshooting. 1. Software & Hardware System Integration • Lead or support system integration and debugging between medical device software and hardware., • Understand and troubleshoot issues related to PLCs, motion control cards, CAN Bus, sensors, motors, and other equipment control modules., • Identify whether field issues originate from software, hardware, electrical, communication, or mechanical systems, and coordinate with relevant teams to achieve timely resolution., • Support the R&D team with equipment upgrades, software version updates, and onsite validation. 1. Technical Communication & Issue Resolution • Serve as the technical interface between European customers/field teams and the China R&D team, accurately collecting, analyzing, and communicating field technical issues., • Translate customer-site issues into clear technical requirements, problem descriptions, and improvement recommendations., • Collaborate with software, hardware, R&D, and product teams in China to follow technical issues through to closure., • Conduct root cause analysis of recurring or systemic issues and recommend product or process improvements. 1. Technical Documentation & Compliance • Perform technical activities in accordance with the company’s software development, quality management, and medical device-related procedures., • Prepare and maintain installation records, maintenance records, failure analysis reports, test reports, technical documentation, and customer service records., • Support product upgrades, CAPA activities, complaint investigations, and other quality-system-related technical activities. 1. Customer Training & European Regional Support • Provide equipment operation, basic maintenance, and troubleshooting training to customers, distributors, and internal teams as required., • Support customer field service activities in Spain and other European countries., • Travel throughout Europe based on business needs. Qualifications & Requirements • Bachelor’s degree or above in Computer Science, Software Engineering, Electronic Engineering, Automation, Mechatronics, Biomedical Engineering, or a related discipline., • At least 5 years of experience in software, medical devices, automation equipment, or a related technical field. Medical device industry experience is preferred., • Proficiency in C++ and Qt/QML, with practical experience in software development, debugging, and maintenance., • Familiarity with Windows/Linux environments, with the ability to independently perform software installation, configuration, log analysis, and troubleshooting., • Strong combined software and hardware technical capabilities, with an understanding of equipment hardware architecture, electrical systems, sensors, motion control, and equipment communications., • Familiarity with one or more industrial communication and control technologies, including:, • PLC, • Motion control cards, • CAN Bus, • Serial Communication, • TCP/IP, • USB and other equipment communication interfaces, • Knowledge of medical device automation, machine vision, and OpenCV is preferred., • Experience in equipment installation, commissioning, maintenance, or Field Service, with the ability to independently resolve technical issues at customer sites., • Strong analytical and troubleshooting skills, with the ability to quickly identify whether an issue relates to software, hardware, communications, electrical systems, or other system modules., • Language Requirements:, • Chinese: Fluent; able to communicate professionally and technically with the China R&D and management teams., • English: Fluent; able to use English as the primary written and spoken working language across the European region., • Spanish: Preferred; the ability to communicate with Spanish customers in technical discussions and training is an advantage., • Strong customer communication, teamwork, and service-oriented skills, with the ability to work independently and take ownership of field issue resolution., • Willingness and ability to travel throughout Spain and Europe for customer-site equipment installation, maintenance, upgrades, and training.

Overview In this role you will transition into a management-focused leadership position within Fever’s engineering team. You will lead and mentor a group of software engineers, shape the technical direction, and oversee project planning, execution, and delivery. You’ll partner with cross-functional teams to align goals and continuously improve engineering practices. This is a chance to drive impact at a high-growth global category leader and help scale Fever’s platform for audiences and creators. Compensaciones / Beneficios • base salary with significant bonus potential, • Stock options, • 40% discount on Fever events, • Home office friendly, • Health insurance, • English lessons Responsabilidades • Lead, mentor, and grow a team of software engineers, • Oversee planning, execution, and delivery of software projects, • Collaborate with cross-functional teams to align goals and objectives, • Drive continuous improvement in engineering practices and processes Requisitos principales • At least 5 years as Senior Software Engineer or 2 years as Tech Lead, • Passion for mentoring and developing talent, • Technical education in engineering or similar, • Strong communications skills, • Experience in people management, career development and performance evaluation, • Experience with assessment tools and metrics, • Experience applying best practices in technical teams (Agile, peer reviews, testing, sprints), • Resourceful with informed decision-making, • Team leadership attitude, • Emotional intelligence, • Strong communication, • Strong technical expertise, • Experience with Agile methodologies, peer reviews, testing, sprint execution, • Problem-solving skills

¿Estás preparadx para un cambio y explotar tus habilidades como nunca? 👉🏼 Sigue leyendo porque tenemos lo que buscas… 🛸 ¿Quiénes somos? 🛸 Somos una empresa internacional con más de 20 años de experiencia en consultoría e ingeniería informática. Con más de 2.500 Primers operando en 4 sectores principales en todo el mundo: IT, Telecomunicaciones, Energía e Infraestructuras Nos puedes encontrar en más de 50 ciudades en todo el mundo: ESPAÑA | PORTUGAL | FRANCIA | REINO UNIDO | ITALIA | SUIZA | POLONIA | BRASIL 🕵🏽 ¿Qué buscamos? 🕵🏽 • Formación en Delineación, Diseño en Fabricación Mecánica, Construcción o similar, • Mínimo 2 años de experiencia en modelado BIM de estructuras metálicas, • Manejo avanzado de Revit y experiencia con AutoCAD, • Valorable experiencia en estructuras industriales, naves o proyectos de ingeniería, • Capacidad para interpretar planos y documentación técnica y generar planos 2D a partir del modelo 3D, • Valorable conocimiento de Navisworks, • El inglés medio (documental) ¡¡Y lo más importante de todo que realmente estés motivadx para un cambio!! 🚀 ¿Qué ofrecemos? 🚀 Podemos asegurarte que contamos con el mejor equipo de todo el sector. Desde el proceso de selección, tu incorporación y hasta nuestro desarrollo profesional te ofrecemos un acompañamiento y un seguimiento personalizado en todo momento. Y a todo esto súmale transparencia total en todos los pasos. Pinta bien, ¿verdad? 📝 Condiciones 📝 🧑🏽 💻Remoto 💸 27.000 – 32.000 Tenemos la seguridad de que ya sabes qué es lo que muchas empresas te ofrecen y por supuesto, en PrimeIT estamos a la altura: • Vas a contar con un plan de carrera, crecimiento, proyección y desarrollo profesional personalizado, • Tendrás acceso a formación continua para que puedas estar al día, • Podrás participar en proyectos nacionales e internacionales con opción a movilidad, • No todo va a ser trabajar, por eso disfrutar de la tarjeta restaurante y seguro médico nos parece esencial, • Acceso a Wellhub para poder estirar las piernas después de un día sentado, • ¡¡¡Teambuildings, afterworks y muchas más sorpresas!!!

LLM Engineer (Mid & Senior Levels) | AI / Quantum Computing Scale-up Location: San Sebastian, Spain (Hybrid) Work at the frontier of deep-tech with the EU’s leading Quantum Software scale-up. Recognised as a Global Top 100 AI company, my client is leveraging quantum-inspired algorithms to solve the most complex challenges in Finance, Energy, and Manufacturing. We are looking engineers who don't just "use" LLMs, but understand how to strip them down, compress them, and optimise them for world-class performance. • Innovate: Design new techniques to compress Large Language Models using quantum-inspired technologies., • Scale: Fine-tune and optimise Transformers for enhanced accuracy, robustness, and efficiency., • Architect: Evaluate GPU architectures and deploy high-performance AI solutions in cloud and HPC environments., • Lead: Act as a domain expert, mentoring junior talent and contributing to cutting-edge research., • Education: MSc or PhD in AI, CS, or a related quantitative field., • Experience (Mid): 2+ years hands-on with Transformer models and deep learning., • Experience (Senior): 5+ years, including experience with Computer Vision or broader Deep Learning., • Tooling: Expert Python, PyTorch, HuggingFace (Transformers/Accelerate), and Docker., • Systems: Strong understanding of GPU architectures and AWS cloud deployment., • Soft Skills: Fluent English; ability to communicate complex technical concepts to global stakeholders., • Research publications in Deep Learning., • Experience with Inference/Deployment (TensorRT, vLLM)., • Building and evaluating RAG systems or non-LLM DL applications (Audio/Signal Processing)., • Security: Indefinite contract with an equal-pay guarantee., • Relocation: Full Work Visa sponsorship and relocation support provided., • Balance: Hybrid working, flexible hours, and private health insurance., • Growth: Dedicated educational budget and a high-velocity R&D culture. Apply directly through LinkedIn, or send your CV to george@eu-recruit.com By applying to this role you understand that we may collect your personal data and store and process it on our systems. For more information please see our Privacy Notice https://eu-recruit.com/wp-content/uploads/2024/07/European-Tech-Recruit-Privacy-Notice-2024.pdf #J-18808-Ljbffr

Commissioning Engineer for UPS. Regional Service Representative for UPS. UPS, Battery cabinets, Transfer Switches).

Would you like to continue your development as a.Commissioning Engineer for UPS.Regional Service Representative for UPS.The role is primary focusing on.UPS, Battery cabinets, Transfer Switches).Be able to identify if the failure is related to a quality issue/software issue / operation condition issu

Would you like to continue your development as a.Commissioning Engineer for UPS.Regional Service Representative for UPS.The role is primary focusing on.UPS, Battery cabinets, Transfer Switches).Be able to identify if the failure is related to a quality issue/software issue / operation condition issu

Responsibilities: 1. Serve as the primary technical expert for our Power Conversion System (PCS) and energy storage solutions, engaging directly with clients and sales teams., 2. Analyze customer requirements and design competitive, tailored technical proposals and system schematics for energy storage projects., 3. Lead the technical preparation for bids and tenders, ensuring high-quality and compliant submissions., 4. Conduct market and competitor analysis to provide insights for strategy and product positioning in the market., 5. Act as the key technical liaison between Sales, R&D, and Project Delivery teams throughout the sales cycle., 6. Provide technical training and support to sales staff, partners, and key clients., 7. Represent the company at industry events and conferences to promote technical expertise and solutions. Requirements: 1.Bachelor's degree or higher in Electrical Engineering, Power Electronics, or a related field. 2.Minimum 3 years of experience in a pre-sales, technical support role within energy storage PCS. 3.Solid understanding of Battery Energy Storage Systems (BESS) applications and standards. 4.Full professional proficiency in English (written and spoken) is mandatory. 5.Excellent communication, presentation, and interpersonal skills. 6.Self-motivated, results-oriented, and willing to undertake frequent travel.

Geek+ is a global technology company specializing in smart logistics. We apply advanced robotics and artificial intelligence technologies to create solutions for warehouse and factory operations. With the rise of e-commerce and the demand for faster and more flexible movement of goods, warehouse and manufacturing operators are facing increasingly complex production and logistic challenges today. Speed, product diversification, same-day delivery, volume, safety… these concerns are impacting a wide range of industries, from apparel, retail, automotive, to even electronics, energy and pharmaceutical industries. Geek+ was founded to be the solution to these problems. We make logistics affordable, efficient, flexible, safe and agile. Our vision is to establish a fully automated and intelligent supply chain globally. Responsibilities: • Participate in the full lifecycle of on-site implementation and project delivery for AMR-based warehouse automation projects across Europe, • Support the Project Manager in coordinating customers, suppliers, installation teams, and internal functions such as R&D, Product, and Software to ensure smooth project execution, • Track project schedules and coordinate and monitor on-site installation, equipment commissioning, system integration, testing, and acceptance activities, • Support the management of on-site work quality, safety, and operational compliance.Identify field issues and project risks in a timely manner and drive them toward effective resolution, • Prepare and maintain project documentation, including installation records, acceptance documents, risk lists, and lessons learned, • Support the coordination and management of on-site resources, including personnel, equipment, materials, and external partners, • Contribute to the standardization and continuous improvement of project delivery processes to improve implementation quality and delivery efficiency, • Travel frequently across Europe according to project requirements Required Qualifications, Capabilities, and Skills: • Bachelor’s or master’s degree in Industrial Engineering and Management, Electrical Engineering and Information Technology, Automation Engineering, or a related field, • Strong interest in project management, automation systems, and project delivery, • Good organizational, coordination, communication, and cross-functional collaboration skills, • Strong problem-analysis skills and the ability to proactively follow up on and drive issues toward resolution, • Responsible, proactive, and team-oriented, with a strong field service mindset, • Professional working proficiency in English. Spanish language skills are a plus, • Willingness and ability to travel frequently across Europe Preferred Qualifications: • Internship or professional experience in automation, logistics systems, equipment installation, or project implementation, • Experience in project coordination, supplier coordination, or customer communication, • A valid EU driving licence

• Role: Research Engineer - Electrical, Mechanical & Chemical (Remote), • Location: Remote (Work from Anywhere) Role Overview: We are hiring for one of our clients, seeking a PhD Engineer (Electrical, Mechanical, Chemical) to work on a Full-Time basis. The role involves developing and optimizing advanced engineering solutions across multiple disciplines to support high-impact projects. Candidates will collaborate with cross-functional teams to drive innovation and solve complex technical challenges in a remote-first environment. Key Responsibilities: • Design, simulate, and validate electrical, mechanical, or chemical systems based on project requirements, • Conduct theoretical modeling and experimental validation to ensure system performance and reliability, • Develop and refine algorithms or processes to enhance efficiency and scalability of engineering solutions, • Prepare technical reports, documentation, and presentations for stakeholders and leadership, • Provide expert-level troubleshooting and optimization recommendations for existing systems Required Skills & Qualifications: • PhD in Electrical, Mechanical, or Chemical Engineering from an accredited institution, • Proven experience in applied research, system design, or process optimization in relevant engineering domains, • Strong proficiency in simulation tools such as COMSOL, ANSYS, MATLAB, or SPICE, • Demonstrated ability to translate theoretical concepts into practical, scalable engineering solutions, • Experience with data analysis, statistics, and experimental design methodologies, • Excellent written and verbal communication skills for technical documentation and stakeholder updates More About the Opportunity: This role offers a unique opportunity to work with a global leader in the research services industry, contributing to breakthroughs in high-tech engineering applications. The position provides exposure to cutting-edge projects with direct impact on product development and innovation cycles. Equal Opportunity Employer: We hire based on skills and expertise. All qualified candidates are welcome regardless of background, experience, or prior employment history. Applications are reviewed solely on demonstrated technical ability and qualifications. Apply Now!

Ingeniero/a de Cálculo Estructural (FEM) Ubicación: Modelo híbrido o Remoto Contrato: Indefinido Experiencia: A partir de 1 año ¿Te apasiona el cálculo estructural y el sector aeronáutico? En Hedon Technologies buscamos un/a Ingeniero/a de Cálculo Estructural para incorporarse a un proyecto de alto valor tecnológico. Participarás en el análisis, validación y dimensionamiento de estructuras mecánicas, trabajando con herramientas de cálculo por elementos finitos en un entorno altamente especializado. ¿Cuáles serán tus responsabilidades? • Definir casos de carga y condiciones de contorno., • Desarrollar y explotar modelos de elementos finitos (FEM) mediante FEMAP/NASTRAN o herramientas equivalentes., • Realizar análisis:, • Estáticos, • Modales, • Pandeo (Buckling), • Realizar cálculos analíticos de apoyo., • Analizar e interpretar resultados de simulación., • Elaborar informes técnicos de cálculo con hipótesis, resultados y conclusiones., • Redactar documentación técnica durante las diferentes fases del proyecto., • Participar en el análisis de estructuras fabricadas en materiales metálicos y compuestos. ¿Qué buscamos? • Grado en Ingeniería Aeronáutica, Mecánica o Industrial., • Al menos 1 año de experiencia en cálculo estructural., • Experiencia con software FEM:, • FEMAP, • NASTRAN, • o herramientas equivalentes., • Conocimientos de resistencia de materiales y cálculo analítico., • Capacidad para trabajar de forma autónoma y orientada a la calidad técnica. Se valorará especialmente • Experiencia en proyectos aeronáuticos o de defensa., • Conocimientos de materiales compuestos., • Conocimiento de normativas aeronáuticas o industriales (EN, ISO, ECSS, etc.)., • Inglés técnico. ¿Qué te ofrecemos? • Contrato indefinido., • Proyecto estable dentro del sector aeronáutico., • Participación en proyectos de alta tecnología., • Entorno técnico exigente, dinámico y colaborativo., • Plan de formación continua y desarrollo profesional., • Seguro colectivo., • Presupuesto anual de movilidad., • Eventos de equipo y una cultura basada en la cercanía y el crecimiento. ¿Y ahora? Nuestro proceso es sencillo: • Entrevista con nuestro equipo de Talent Acquisition., • Entrevista técnica con tu futuro manager., • Entrevista con el cliente. ¡Bienvenido/a a Hedon Technologies!

Project Engineer – OT Compliance | Remote Europe I’m currently recruiting for an experienced Project Engineer – OT Compliance to support a long-term programme with a major global Life Sciences organisation. 🌍 Location: Europe 🏠 Working Model: 100% Remote 📊 Level: Mid-Level / Senior This role will support an ongoing OT compliance and digital maturity programme across multiple manufacturing sites throughout Europe. Key responsibilities: • Support OT inventory and compliance activities across manufacturing sites, • Review and document technical information relating to OT systems and applications, • Support GxP, data retention and information classification activities, • Manage application and service information within LeanIX and ServiceNow, • Engage directly with sites to gather, review and validate information, • Track progress and produce reports to support programme delivery, • Work closely with cross-functional IT, OT and site teams What we’re looking for: • 3+ years' experience across OT, Automation, Manufacturing IT or Industrial Systems, • Strong understanding of industrial networks and IT/OT architecture, • Experience implementing or supporting OT systems, • Understanding of GxP and Computer System Validation (CSV) concepts, • Knowledge of ITIL, • Strong MS Office, Excel and SharePoint skills, • Excellent communication and stakeholder management skills, • LeanIX and/or ServiceNow experience would be a strong advantage This would suit someone from an OT Engineering, IT/OT, Automation Systems, Manufacturing Systems or OT Compliance background looking for a long-term, fully remote European project.

¿Te interesaría seguir desarrollándote como SCADA Engineer en una multinacional líder del sector energético, automatización industrial e infraestructuras críticas, trabajando con tecnología avanzada en proyectos internacionales? Desde Oxigent Technologies seleccionamos un/a SCADA Engineer EPO / EPAS o PACiS para participar en proyectos internacionales de automatización y control de subestaciones de alta tensión, dentro de una compañía referente en soluciones de gestión energética y automatización. En el caso de ser la persona seleccionada, tu misión será participar en la configuración, integración, puesta en marcha y soporte técnico de sistemas SCADA aplicados a subestaciones eléctricas, trabajando con soluciones como EPAS / PACIS y EPO / PSO ¿Cuáles serán tus funciones principales? • Configurar e implementar sistemas SCADA como EPAS / PACIS o EPO / PSO en proyectos de subestaciones eléctricas., • Trabajar con redes industriales y protocolos de comunicación como IEC 61850, Modbus, OPC UA, Profinet e IP/Ethernet., • Participar en pruebas FAT/SAT, puesta en marcha, soporte técnico y resolución de incidencias., • Elaborar documentación técnica y colaborar con clientes y equipos internacionales para adaptar las soluciones a cada proyecto. Para ello, ¿qué vas a necesitar? • Formación en Ingeniería Eléctrica, Electrónica, Automatización, Telecomunicaciones o similar., • A partir de 3 años de experiencia en proyectos de automatización, control o SCADA., • Experiencia práctica con EPAS / PACIS, EPO / PSO..., • Conocimientos sólidos en comunicaciones industriales, especialmente IEC 61850, Modbus, OPC UA, Profinet o Ethernet., • Capacidad para interpretar planos eléctricos y diagramas unifilares., • Inglés B2 mínimo para trabajar con equipos internacionales., • Disponibilidad para viajar por Europa aproximadamente entre 60% y 75% del tiempo según proyecto Se valorará positivamente: • Experiencia en protección y control en subestaciones de alta tensión., • Formación o experiencia previa con tecnologías de automatización y gestión energética., • Familiaridad con herramientas de simulación o modelado eléctrico. ¿Qué te ofrecemos? • Contratación indefinida a través de Oxigent., • Salario en torno a 50.000 € brutos anuales, valorable según experiencia./Posibilidad de freelance., • Remoto 100% desde cualquier lugar de España cuando no se viaje., • Horario flexible, con organización autónoma de la jornada cumpliendo 40 horas semanales., • Cheque Formación para desarrollarte en las áreas profesionales que más te interesen., • Seguro médico privado., • Retribución flexible aplicable a seguro médico, restaurante, transporte, guardería y formación., • Aplicación de acceso a gimnasios y actividades deportivas en toda España con descuentos. ¡Únete al equipo de Oxigent! Empresa comprometida con la sostenibilidad y la igualdad de oportunidades, donde el talento y la tecnología no entienden de género.

Exceptional communication and interpersonal abilities to foster collaboration and maintain strong client relationships.

Se incorporará en la planta productiva de esta compañía biotecnológica especializada en el desarrollo y fabricación de productos alimentarios innovadores, dentro del área de Producción e Ingeniería de Procesos.Las funciones principales serán:.Colaborar con los departamentos de calidad, prod

Ingeniero de Hardware y firmware para sistemas Embebidos. Ingeniero/a de Hardware y Firmware para Sistemas Embebidos.

Overview In this role you will advance safe electronic control functions across e-powertrain, chassis, and related systems, aligning with ISO 26262 standards. You will collaborate within AVL’s software team to model, review, and validate functional safety concepts, coordinating tasks and documenting safety work products. You’ll engage in risk assessments and safety analyses, representing functional safety and cybersecurity to customers. The position offers international exposure and the opportunity to contribute to cutting-edge mobility technologies. Responsabilidades • Support development of safe critical electronic control functions (e-powertrain, chassis, power electronics, HV-Battery, ADAS) per ISO 26262, • Coordinate customer requirements and support concepts implementation up to production, • Support model-based development: optimize and review functional models, including test and validation strategy, • Plan, coordinate, and supervise tasks within the functional safety process, • Document functional safety work products, • Conduct risk assessments and safety analyses (HARA, FMEA, FTA) according to standards, • Represent functional safety and cybersecurity in AVL and to customers, • Support development of new technologies and approaches Requisitos principales, • Degree in mechanical/ electrical engineering, mechatronics, vehicle technology, physics, computer science or similar, • Interest in mobility development, functional safety or automotive cybersecurity and automated driving technologies, • Basic experience in control engineering and model-based development (MATLAB/Simulink, SysML or similar), • Familiar with automotive development processes and functional safety standards (ISO 26262, IEC 61508 or similar), • Flexible, proactive, structured, and detail-oriented work style, • Strong communication and team-working skills, • Proficient in English and Spanish; German is a plus, • communication, • teamwork, • proactivity, • MATLAB/Simulink, • SysML, • functional safety processes

Overview In this role you will help develop and validate electrical, automation and control systems for advanced naval and defence platforms. You’ll work within multidisciplinary teams on international projects, translating customer needs into reliable propulsion and power systems. You will tackle integration, testing and troubleshooting across the project lifecycle, driving improvements in engineering processes. This role offers hands-on impact in a specialized, technology-driven environment with a global scope. Compensaciones / Beneficios • permanent contract, • salary 32.000-45.000 gross per year, • private health insurance, • life insurance, • mobile phone, • flexible compensation package with meal vouchers and transport allowance Responsabilidades, • Develop and integrate electrical and control system architectures for naval and defence applications, • Design and analyse power distribution, energy management and control systems, • Develop, implement and validate propulsion, power generation and auxiliary control strategies, • Support system integration, commissioning, testing and troubleshooting, • Analyse system/test results to identify root causes and define corrective actions, • Work with PLC, automation, monitoring and communication systems in demanding environments, • Prepare technical specifications, engineering documentation and test procedures, • Collaborate with customers, suppliers and multidisciplinary teams, • Contribute to continuous improvement of engineering processes and technologies Requisitos principales, • Degree in Electrical Engineering, Automation Engineering, Control Engineering or related discipline, • Professional experience in electrical engineering and/or control systems environments, • Experience or strong interest in naval, marine or defence-related applications, • Knowledge of electrical systems, automation architectures and control systems, • Experience in system integration, testing and commissioning activities, • Strong analytical and problem-solving capabilities, • Excellent communication and teamwork skills, • Good command of English (written and spoken), • communication, • teamwork, • analytical thinking, • PLC/SCADA platforms, • industrial automation systems, • knowledge of communication protocols

Overview In this role you contribute to the development of mobility and energy solutions by steering systems engineering across requirements, architecture, integration, and validation. You will join an international, multidisciplinary team to deliver state-of-the-art vehicle systems. You will shape technical solutions and lead system development within a domain, driving robust verification and continuous improvement. This is an opportunity to influence the performance and integration of powertrain and related vehicle systems at AVL. Compensaciones / Beneficios • Competitive salary, • Private health insurance, • Life insurance, • Flexible compensation package, • International, technology-driven work environment, • Professional development plan and growth opportunities Responsabilidades, • Define and manage system requirements aligned with customer objectives, • Design technical solutions and architectures for complex products, • Coordinate system integration, calibration, verification and validation activities, • Collaborate with customers, suppliers and cross-functional teams to drive project success, • Act as technical lead within a development domain or project, • Support test planning, test cases and validation strategies, • Analyze test results, troubleshoot deviations and support problem resolution, • Ensure compliance with industry standards and quality processes, • Prepare technical documentation and release content, • Contribute to project planning, milestones and quality gates, • Perform performance analysis and optimization of vehicle and system functions, • Stay current with new technologies and MBSE/dev tools Requisitos principales, • Bachelor's degree in Automotive Engineering, Electrical Engineering, Mechanical Engineering, Mechatronics or related field, • Knowledge of systems engineering principles and modern product development methodologies, • Strong understanding of at least one vehicle system or technology domain, • Basic knowledge of different vehicle systems and their interactions, • Understanding of in-vehicle communication networks, • Experience with requirements engineering tools, • Knowledge of systems engineering tools and development toolchains, • Good understanding of lifecycle management and engineering work products, • Analytical mindset with strong problem-solving skills, • Excellent communication and teamwork abilities, • Fluent English and Spanish (written and spoken), • Excellent communication and teamwork, • Analytical mindset, • Strong problem-solving, • Systems engineering principles, • Requirements engineering tools, • MBSE (Model-Based Systems Engineering)

Participa en innovadores proyectos de ingeniería, aportando al equipo tu experiencia en proyectos de instalaciones mecánicas.Por eso, si tienes más de 3 años de experiencia trabajando en proyectos de diseño y cálculo de instalaciones HVAC en edificaciones de grandes dimensiones, nos compromete

About the Role We are supporting an international high-technology engineering organization developing advanced products and systems for demanding applications. We are looking for a Composites Manufacturing Specialist Engineer to join its manufacturing engineering organization. The successful candidate will support the development, industrialization, qualification, and continuous improvement of composite materials and manufacturing processes, with a strong focus on prepreg technologies. This position combines hands-on manufacturing engineering with materials and process expertise and will work closely with engineering, production, quality, supply chain, and external suppliers. Key Responsibilities • Develop and maintain engineering specifications for hand lay-up manufacturing processes for prepreg composite components., • Define manufacturing routing sheets for prepreg parts in accordance with applicable engineering specifications., • Establish, document, and control prepreg material handling requirements, including out-time tracking, storage conditions, material lot traceability, and shelf-life management., • Lead and support new-part qualification activities, including definition of first-article build plans, preparation of process documentation, and support during qualification inspections., • Develop, evaluate, and validate new composite manufacturing processes before their release to production, including lay-up configurations, cure cycles, and vacuum bagging techniques., • Coordinate with new material and manufacturing process suppliers, establishing evaluation criteria, overseeing sample testing, and verifying compliance with applicable technical specifications., • Support the introduction, transition, and qualification of automated composite manufacturing technologies, particularly Automated Fiber Placement (AFP), including technical comparison and benchmarking against manual manufacturing processes., • Define, update, and maintain routing sheets, work instructions, and manufacturing/process documentation for new and existing components and processes., • Define ply kit requirements based on engineering ply books and established lay-up sequences., • Provide engineering disposition and technical support for SCSRs and manufacturing non-conformances, including containment activities and corrective-action follow-up., • Capture and document lessons learned from manufacturing and qualification activities., • Update work instructions and process documentation as new components, manufacturing processes, materials, or suppliers are introduced and qualified. Education Bachelor's degree in a closely related engineering discipline: Experience • Minimum 3 years of professional experience in composite manufacturing, with the required level of experience depending on the seniority of the position., • Practical knowledge of composite manufacturing processes and materials., • Experience working with prepreg composite materials and manufacturing processes., • Understanding of manufacturing documentation, engineering specifications, and process control. Preferred Qualifications • Master's degree in a relevant engineering discipline., • Previous experience within the aerospace sector or another highly regulated, advanced engineering environment. Technical Expertise The ideal candidate will have knowledge and/or hands-on experience in: • Prepreg composite manufacturing, • Hand lay-up processes, • Composite material handling and control, • Prepreg out-time and shelf-life management, • Lay-up configurations and ply sequences, • Ply books and ply kit definition, • Vacuum bagging techniques, • Composite cure cycles, • Automated Fiber Placement (AFP), • First Article and new-part qualification, • Manufacturing process development and validation, • Engineering specifications, • Manufacturing routing sheets, • Work instructions and process documentation, • Material and process supplier qualification, • Non-conformance evaluation and engineering disposition, • Corrective-action follow-up Skills & Competencies • Strong analytical and problem-solving skills., • Excellent attention to detail, particularly when working with controlled manufacturing processes and technical documentation., • Ability to collaborate effectively within cross-functional engineering and manufacturing teams., • Strong written and verbal communication skills., • Ability to manage multiple projects, technical activities, and priorities simultaneously., • Structured and quality-oriented approach to manufacturing engineering. Physical & Working Requirements • Ability to work with composite materials and manufacturing processes in an engineering and production environment., • Ability to use a computer for extended periods., • Ability to review and work with manufacturing documentation, process instructions, and engineering specifications.

¿Te interesaría seguir desarrollándote como Commissioning Engineer (for Low Voltage Systems) en proyectos de data centers y grandes plantas industriales por toda Europa, trabajando con la gama de celdas de un fabricante líder mundial y con un equipo técnico de primer nivel? Desde Oxigent Technologies seleccionamos un/a ingeniero/a de puesta en servicio de sistemas de baja tensión para participar en la puesta en servicio de celdas y cuadros de MT en grandes obras, plantas industriales y Data Centers en Alemania, Francia, Italia, UK e Irlanda y Países Nórdicos. ¿Cuáles serán tus funciones principales? · Puesta en marcha y comisionamiento de cuadros y sistemas de distribución de Baja Tensión (OKKEN, Blokset, Prisma). · Trabajar con interruptores Masterpact (MTZ), dispositivos compactos NSX, relés Micrologic, analizadores de red (ION) y sistemas de comunicación Modbus. · Evaluar las condiciones de montaje, cableado y operatividad de los armarios eléctricos. · Ajustar parámetros in situ para garantizar un funcionamiento seguro y eficiente. · Identificar y solucionar averías mediante Análisis de Causa Raíz (RCA). · Ejecutar mantenimiento preventivo y correctivo en equipos de BT. · Documentar las pruebas realizadas y elaborar informes técnicos de comisionamiento. Para ello, ¿qué vas a necesitar? · Formación electrotécnica (valorable Grado o Ingeniería Eléctrica). · Mínimo 5 años en servicios de campo o comisionamiento de cuadros de potencia en Baja Tension. · Inglés fluido (mínimo B2). · Comprensión sólida de principios eléctricos en Baja Tensión, automatismos y conmutación. · Habilidad para interpretar esquemas de potencia y control de cuadros eléctricos complejos. · Dominio de herramientas de medición y verificación eléctrica. · Manejo de herramientas informáticas: AutoCAD, MS Office, Acrobat y software de comisionamiento. · Disponibilidad para viajar más del 70% del tiempo por Europa. · Valorable: relés Sepam, MiCOM, Easergy P3/P5/P7, transformadores de MT (Trihal, Minera) y celdas primarias/secundarias. ¿Qué te ofrecemos? · Colaboración freelance a través de Oxigent en un proyecto de largo recorrido. · Tarifa de 50 a 60 euros/hora según experiencia aportada. · Proyectos de referencia en data centers y plantas industriales de primer nivel en Europa. ¡Únete al equipo de Oxigent! Empresa comprometida con la sostenibilidad y la igualdad de oportunidades, donde el talento y la tecnología no entienden de género.

Con presencia en más de 30 países de Europa, Asia y América, apostamos por la innovación, aprovechando el talento de nuestros equipos y la tecnología para transformar industrias y ofrecer soluciones de vanguardia a los desafíos más complejos del mundo.Tienes experiencia en cálculo estructura

Newton Colmore is partnered with a venture-backed deep tech company developing novel intelligent systems that will transform how complex industrial and scientific processes are designed, monitored, and optimised. As the organisation continues to scale, they are seeking a machine learning engineer to take ownership of advanced modelling, machine learning, and predictive analytics initiatives at the heart of their technology platform. You will be joining a highly talented team of scientists and engineers who are tackling a difficult technical challenge and applying new computational methods to real-world problems.The role offers autonomy, access to leadership, and the opportunity to help shape both technology strategy and future product direction. In this role you will work across the full lifecycle of scientific and engineering modelling, turning complex data into pratical insights • Developing advanced mathematical and machine learning models for complex real-world systems., • Building predictive models and digital representations of physical processes., • Combining first-principles approaches with modern AI and machine learning techniques., • Designing and analysing experimental programmes to generate meaningful insights and improve model performance., • Working with large-scale sensor and operational datasets to develop forecasting and monitoring capabilities. To be successful in this role you will need a strong quantitative background and a track record of applying advanced modelling techniques to real-world challenges. • MSc or PhD in Mathematics, Physics, Statistics, Applied Mathematics, Computer Science, Engineering, or a related quantitative discipline., • Industrial experience developing computational, statistical or machine learning models., • Strong understanding of mathematical modelling, optimisation, simulation, or predictive analytics., • Excellent Python programming skills and experience working with modern scientific computing frameworks. Any additional experience with digital twin technologies, Bayesian modelling, or working knowledge gained within an engineering or life sciences setting would be highly advantageous. • Opportunity to play a pivotal role in a rapidly growing deep-tech company., • High-impact position with significant technical ownership., • Competitive salary package., • Meaningful equity participation., • Clear progression path into technical leadership., • Collaborative, highly capable and mission-driven team environment., • The chance to work on genuinely novel technology with impact. Full details of the company and technology will be shared with shortlisted candidates. #J-18808-Ljbffr

Newton Colmore is partnered with a venture-backed deep tech company developing novel intelligent systems that will transform how complex industrial and scientific processes are designed, monitored, and optimised.This will be either a hybrid or remote role with occasional travel to HQ in Spain. As the organisation continues to scale, they are seeking a machine learning engineer to take ownership of advanced modelling, machine learning, and predictive analytics initiatives at the heart of their technology platform. You will be joining a highly talented team of scientists and engineers who are tackling a difficult technical challenge and applying new computational methods to real-world problems.The role offers autonomy, access to leadership, and the opportunity to help shape both technology strategy and future product direction. In this role you will work across the full lifecycle of scientific and engineering modelling, turning complex data into pratical insights Responsibilities include: • Developing advanced mathematical and machine learning models for complex real-world systems., • Building predictive models and digital representations of physical processes., • Combining first-principles approaches with modern AI and machine learning techniques., • Designing and analysing experimental programmes to generate meaningful insights and improve model performance., • Working with large-scale sensor and operational datasets to develop forecasting and monitoring capabilities. To be successful in this role you will need a strong quantitative background and a track record of applying advanced modelling techniques to real-world challenges. You will likely have: • MSc or PhD in Mathematics, Physics, Statistics, Applied Mathematics, Computer Science, Engineering, or a related quantitative discipline., • Industrial experience developing computational, statistical or machine learning models., • Strong understanding of mathematical modelling, optimisation, simulation, or predictive analytics., • Excellent Python programming skills and experience working with modern scientific computing frameworks. Any additional experience with digital twin technologies, Bayesian modelling, or working knowledge gained within an engineering or life sciences setting would be highly advantageous. What's on Offer • Opportunity to play a pivotal role in a rapidly growing deep-tech company., • High-impact position with significant technical ownership., • Competitive salary package., • Meaningful equity participation., • Clear progression path into technical leadership., • Collaborative, highly capable and mission-driven team environment., • The chance to work on genuinely novel technology with impact. For a confidential discussion, Full details of the company and technology will be shared with shortlisted candidates. #J-18808-Ljbffr

Ingeniero/a de Cálculo Estructural (FEM) Ubicación: Modelo híbrido o Remoto Contrato: Indefinido Experiencia: A partir de 1 año ¿Te apasiona el cálculo estructural y el sector aeronáutico? En Hedon Technologies buscamos un/a Ingeniero/a de Cálculo Estructural para incorporarse a un proyecto de alto valor tecnológico. Participarás en el análisis, validación y dimensionamiento de estructuras mecánicas, trabajando con herramientas de cálculo por elementos finitos en un entorno altamente especializado. ¿Cuáles serán tus responsabilidades? • Definir casos de carga y condiciones de contorno., • Desarrollar y explotar modelos de elementos finitos (FEM) mediante FEMAP/NASTRAN o herramientas equivalentes., • Realizar análisis:, • Estáticos, • Modales, • Pandeo (Buckling), • Realizar cálculos analíticos de apoyo., • Analizar e interpretar resultados de simulación., • Elaborar informes técnicos de cálculo con hipótesis, resultados y conclusiones., • Redactar documentación técnica durante las diferentes fases del proyecto., • Participar en el análisis de estructuras fabricadas en materiales metálicos y compuestos. ¿Qué buscamos? • Grado en Ingeniería Aeronáutica, Mecánica o Industrial., • Al menos 1 año de experiencia en cálculo estructural., • Experiencia con software FEM:, • FEMAP, • NASTRAN, • o herramientas equivalentes., • Conocimientos de resistencia de materiales y cálculo analítico., • Capacidad para trabajar de forma autónoma y orientada a la calidad técnica. Se valorará especialmente • Experiencia en proyectos aeronáuticos o de defensa., • Conocimientos de materiales compuestos., • Conocimiento de normativas aeronáuticas o industriales (EN, ISO, ECSS, etc.)., • Inglés técnico. ¿Qué te ofrecemos? • Contrato indefinido., • Proyecto estable dentro del sector aeronáutico., • Participación en proyectos de alta tecnología., • Entorno técnico exigente, dinámico y colaborativo., • Plan de formación continua y desarrollo profesional., • Seguro colectivo., • Presupuesto anual de movilidad., • Eventos de equipo y una cultura basada en la cercanía y el crecimiento. ¿Y ahora? Nuestro proceso es sencillo: • Entrevista con nuestro equipo de Talent Acquisition., • Entrevista técnica con tu futuro manager., • Entrevista con el cliente. ¡Bienvenido/a a Hedon Technologies!

Te interesaría seguir desarrollándote como I.Mecánico en una empresa líder mundial en gestión de la energía y automatización industrial.Cuáles serán tus funciones principales?.Ingeniería Mecánica en el diseño y modificación de equipos eléctricos.Realizar modelado 3D, generación de pla

En Akkodis combinamos soluciones digitales e ingeniería para crear un futuro más inteligente para todas las personas. Con presencia en más de 30 países de Europa, Asia y América, apostamos por la innovación, aprovechando el talento de nuestros equipos y la tecnología para transformar industrias y ofrecer soluciones de vanguardia a los desafíos más complejos del mundo. ¿Tienes experiencia en cálculo estructural dentro del sector aeronáutico y buscas un proyecto internacional? Esta puede ser tu próxima oportunidad. Estamos buscando un/a Structural Analysis Engineer para incorporarse a un proyecto internacional en colaboración con un equipo de Bélgica, con posibilidad de trabajar 100% en remoto desde España. ¿Qué buscamos? Alrededor de 5 años de experiencia en análisis estructural. Experiencia en: • Cálculo estructural, • Modelado FEM, • Análisis de fatiga, • Estática, • Vibraciones, • Experiencia previa en programas o proyectos de fabricantes aeronáuticos ¿Qué ofrecemos en Akkodis? • Contrato indefinido., • Incorporación a una compañía multinacional líder en tecnología e ingeniería., • Proyecto internacional, • Formación continua y acceso a programas de desarrollo profesional., • Modalidad 100% remota desde España.

Project Engineer – OT Compliance | Remote Europe I’m currently recruiting for an experienced Project Engineer – OT Compliance to support a long-term programme with a major global Life Sciences organisation. 🌍 Location: Europe 🏠 Working Model: 100% Remote 📊 Level: Mid-Level / Senior This role will support an ongoing OT compliance and digital maturity programme across multiple manufacturing sites throughout Europe. Key responsibilities: • Support OT inventory and compliance activities across manufacturing sites, • Review and document technical information relating to OT systems and applications, • Support GxP, data retention and information classification activities, • Manage application and service information within LeanIX and ServiceNow, • Engage directly with sites to gather, review and validate information, • Track progress and produce reports to support programme delivery, • Work closely with cross-functional IT, OT and site teams What we’re looking for: • 3+ years' experience across OT, Automation, Manufacturing IT or Industrial Systems, • Strong understanding of industrial networks and IT/OT architecture, • Experience implementing or supporting OT systems, • Understanding of GxP and Computer System Validation (CSV) concepts, • Knowledge of ITIL, • Strong MS Office, Excel and SharePoint skills, • Excellent communication and stakeholder management skills, • LeanIX and/or ServiceNow experience would be a strong advantage This would suit someone from an OT Engineering, IT/OT, Automation Systems, Manufacturing Systems or OT Compliance background looking for a long-term, fully remote European project.