Offres car engineering à PlymouthCréer des alertes d'emploi

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an Engineering Surveyor (Assurance).The focus of the role is to provide secondary survey checks and assurance at key stages of construction. Project quality requirements will define the input required for secondary checks. This role will support the construction process and adherence to specifications.Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.Your team Location: Devonport Dockyard, PlymouthContract: Permanent, 42.5 hours a weekMaking Possible In this role as Engineering Surveyor (Assurance), you will be working in a live MOD facility. Your day-to-day tasks will include:Check and maintain survey control networksAssurance surveys for construction of RC structures; through pre-pour, post-pour checksAs-built surveys, through laser scanning and modelling of point cloudsEnsure survey data is collected and recorded accurately, following project QA/QC standards. Operating survey equipment to the highest of precision within a civils environmentSupport engineers with setting out activities to ensure consistent approaches to surveying and engineeringSupport the preparation of survey reports, drawings, and data outputs for engineering and construction teamsCoordinate with site engineers, supervisors, and subcontractors to ensure alignment between construction programme and survey operationsAssist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reportingManage and archive survey files and records to support project compliance and audits, using the Projects Document Management systemAttend daily briefings and provide updates on survey progress and issuesEnsure all surveying works are carried out in accordance with health, safety, and environmental regulations.Support other surveying work packages as requiredThis profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be givenWhat do you bring to the role? Essential:Degree, diploma, or relevant qualification in Civil Engineering, Surveying, or ConstructionSite based roleExperience in surveying and construction industriesConsiderable years of experience in a similar surveying position on a civil engineering projectExperience with surveying equipment; total stations, GPS/GNSS and laser scannersSurvey data processing software; AutoCAD Civil 3D, Leica Infinity, Leica Cyclone and Leica 3DRUnderstanding of QC1 procedures and quality documentation in a civils contextStrong attention to detail and organisational skillsExcellent communication and teamwork abilitiesCSCS Card and relevant site safety qualificationsMember of the CinstCES (or technical member working towards full member), or another bodyAbility to work under pressure and meet tight deadlinesDesirable:Experience working on major infrastructure or utilities projects (e.g., highways, rail, water, energy, nuclear)Knowledge of BIM or digital construction processesFirst aid and additional safety training certificationsWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Senior Quantity Surveyor.The Senior QS plays a crucial role in managing all aspects of the contractual and financial side of construction projects. This role involves preparing cost estimates, managing budgets, negotiating contracts, and ensuring projects are completed within budget and according to specifications.Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.Your team Location: Devonport Dockyard, PlymouthContract: Permanent, 42.5 hours a weekMaking Possible In this role, you will be working in a live MOD facility. Your day-to-day tasks will include:Prepare detailed cost estimates and budgets for construction projectsConduct cost planning and control throughout the project lifecycleReview and negotiate contracts, subcontracts, and variationsManage procurement processes and evaluate supplier and subcontractor bidsMonitor project progress and forecast final costs, identifying potential financial risksPrepare interim and final payment applications and valuationsLiaise with clients, architects, engineers, contractors, and suppliersEnsure compliance with legal, regulatory, and company standardsPrepare financial reports, cost analysis, and documentation for project stakeholdersMentor and guide junior quantity surveyors and other team membersAssist in dispute resolution related to costs and contractual issuesFrom time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be givenWhat do you bring to the role? Essential:Professionally qualified operator with at least 3 years post professional qualification relevant experience or 5 years experienceAcademic Qualifications - Quantity Surveying (HNC, BSc, MSc)CSCS - White PQP/AQPBachelors degree in Quantity Surveying, Construction Management, Civil Engineering, or related fieldProfessional accreditation (e.g., RICS, CIOB) preferredExtensive experience (typically 5+ years) in quantity surveying within construction or infrastructure projectsStrong knowledge of construction contracts, procurement methods, and cost control techniquesProficient in quantity surveying software (e.g., CostX, QS Suite, PlanSwift)Excellent negotiation, communication, and interpersonal skillsStrong analytical and problem-solving abilitiesAbility to work independently and as part of a multidisciplinary teamDesirable:Experience of similar role, preferred in relevant sector (ie Nuclear and Defence)Whats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued.Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

DK Recruitment are working with a global Manufacturer who are looking to offer an experienced and qualified Electrical or Mechanical Technician a new career and join their successful team based in Plymouth.Our client can offer a passionate, committed and rewarding culture for you to grow and thrive within your role.Main Duties:Attend to electro-mechanicalfaults,diagnosingandrepairingin a timely manner to keep up with production targets.ConductPlanned Preventative Maintenance(PPM) andrefurbishoffline machinery and ancillaries.Ensures all manufacturing equipment is set up and produces product according to established Quality Control specifications and standards. Maintaining acceptable quality and waste levels.Ensures that any statutory legislation and/or quality system requirements are adhered to regarding process changes and equipment modification.Continually supervises in-process quality, addressing issues as needed to prevent product holds.Ensures that all existing and new equipment and processes are operated in compliance with all current Quality Control, Health & Safety and Environmental legislation and regulatory requirements.Works closely with Operational, Engineering and Quality Control personnel to actively pursue and promote continuous improvement; SSU, 5S, CIAS, Near Miss, etc.Ensure all equipment is maintained as assigned, and in accordance with requirements detailed on the appropriate schedule/plan or work instruction. Ensuring the minimisation of downtime within planned costs for repair and sparesTo support engineering in theinstallationandvalidationof new equipment and technology and ensure a smooth and acceptable transfer to production.Become actively involved and take part in regular team meetings and participate in project teams as required.Ensures accurate and timely entry of data on to SAP.Operational responsibilities include covering breaks, operating production machinery, assembling product, performing quality checks and pallet release duties.Education & Experience:Qualification in electrical or Mechanical engineering (e.g. City & Guilds, HND etc.) or a time served apprenticeship.Experience in a high volume, highly automated manufacturing environment desirable.Experience in maintenance and fault finding.Methodical in your approach, organised and self-motivated with a safety awareness of electrical, compressed air and pressurised systems.Benefits:Matched contribution Pension scheme up to 10% of salaryLife assurance and critical illness coverPrivate Medical InsuranceShare save scheme matched up to £150/monthReward & recognition scheme linked to Health and Safety and Continuous ImprovementEmployee Assistance Program, supporting physical, mental and financial wellbeingFlexible benefits including cycle to work schemeSubsidized canteenFree car parking24 days holiday (25 after 5 years)TPBN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and Bam Nuttall. We are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Technical Assurance Manager. The Technical Assurance Manager is responsible for overseeing and ensuring the technical quality, compliance, and integrity of projects, products, or services. This role manages technical audits, risk assessments, and quality assurance processes to mitigate risks and uphold industry standards and regulatory requirements.Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks.Eligibility criteria: Candidates must hold a passport from a NATO or MISWG member country and have resided in the UK for the past 5 years.Making Possible In this role, you will be working in a live MOD facility. Your day-to-day tasks will include:Lead and manage technical assurance activities across projects or operations.Develop, implement, and maintain technical assurance frameworks, policies, and procedures.Conduct technical audits, inspections, and reviews to ensure compliance with standards and specifications.Assess technical risks and provide recommendations to mitigate them.Collaborate with engineering, quality, safety, and project teams to resolve technical issues.Manage and monitor the Non-conformance processTrend data from corrective actions and ensure closure of non-conformances.Have an oversite of concrete management and materials managementSupport continuous improvement initiatives related to technical quality and assurance.Prepare and present technical assurance reports to senior management and stakeholders.Ensure alignment with regulatory requirements, industry standards, and company policies.Provide training and guidance on NCRs, technical assurance processes and best practices.This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given.What do you bring to the role? Academic Qualifications - Civil Engineering, Quality, Construction related Qualification (HNC, BSc, MSc, BEng, MEng).Proven experience in technical assurance, quality assurance, or related roles.Strong knowledge of industry standards, codes, and regulations relevant to the sector.Excellent analytical, organizational, and communication skills.Experience conducting audits and managing compliance activities.Ability to lead teams and work collaboratively across functions.Proficiency with technical documentation and assurance tools.ISO 9001 Lead Auditor trained.CSCS Card White / Managers.Desirable:Professional certifications such as Certified Quality Auditor (CQA) or equivalent.Experience in sectors like construction, manufacturing, oil & gas, or aerospace.Familiarity with risk management and continuous improvement methodologies.IOSH Managing SafelyWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentTPBN1_UKTJ

Building a sustainable tomorrow KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an Engineering Surveyor (Machine Control).The focus of the role is to provide support for survey machine-controlled plant. This role will also support construction checks and as-built of construction operations that are completed with machine-control.Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.Your team Location: Devonport Dockyard, PlymouthContract: Permanent, 42.5 hours a weekMaking Possible In this role as Engineering Surveyor (Machine Control), you will be working in a live MOD facility. Your day-to-day tasks will include:Check and maintain survey control networksSupport machine control application for excavation, demolition and drilling operationsCheck design and create models for machine controlComplete checking of machine control operationsProvide check reports and as-builts, through laser scanning and modelling of point cloudsEnsure survey data is collected and recorded accurately, following project QA/QC standards. Operating survey equipment to the highest of precision within a civils environmentSupport engineers with surveying activities to ensure consistent approaches to surveying and engineeringCoordinate with site engineers, supervisors, and subcontractors to ensure alignment between construction programme and survey operationsAssist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reportingManage and archive survey files and records to support project compliance and audits, using the Projects Document Management systemAttend daily briefings and provide updates on survey progress and issuesEnsure all surveying works are carried out in accordance with health, safety, and environmental regulationsSupport other surveying work packages as requiredThis profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be givenWhat do you bring to the role? Essential:Degree, diploma, or relevant qualification in Civil Engineering, Surveying, or ConstructionSite based roleOperating on a 7/3/7/4 shift pattern as per programme needsExperience in surveying and construction industriesConsiderable years of experience in a similar surveying position on a civil engineering projectExperience with Leica Machine Control equipmentExperience with surveying equipment; total stations, GPS/GNSS and laser scannersSurvey data processing software; AutoCAD Civil 3D, Leica Infinity, Leica Cyclone and Leica 3DRUnderstanding of QC1 procedures and quality documentation in a civils contextStrong attention to detail and organisational skillsExcellent communication and teamwork abilitiesCSCS Card and relevant site safety qualificationsMember of the CinstCES (or technical member working towards full member), or another bodyAbility to work under pressure and meet tight deadlinesDesirable:Experience working on major infrastructure or utilities projects (e.g., highways, rail, water, energy, nuclear)Knowledge of BIM or digital construction processesFirst aid and additional safety training certificationsWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.TPBN1_UKTJ

Building a sustainable tomorrowKierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland. We are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Senior Design Manager.The Senior Design Manager leads the entire engineering function on projects, overseeing design teams, coordinating with stakeholders, and ensuring delivery of design solutions on time, within budget, and to required quality standards. (Our Client in their capacity of PC and PD are responsible for the Permanent Works Design, KBJV are responsible for the Temporary Works design and Contractor Design Portions.)Due to the sensitive nature of the site, BPSS security clearance is required. Please note that this process can take up to 8 weeks.Eligibility criteria: Candidates must hold a passport from a NATO or MISWG member country and have resided in the UK for the past 5 years.Making Possible In this role, you will be working in a live MOD facility. Your day-to-day tasks will include:Manage and lead design and engineering teams across multiple disciplines, including: Temporary Works TeamDigital Engineering TeamConcrete and Materials Management TeamsSurvey and Monitoring TeamDevelop and oversee Temporary Works and CDP design strategies, schedules, and deliverables.Coordinate required timescales / delivery dates for design activities with KBJV project management and operational delivery teams.Ensure compliance with contractual, regulatory and quality requirements.Review and approve design outputs, reports and technical documentation.Ensure design and engineering team meetings and client focussed presentations are led effectively.Coordinate design delivery / design outputs internally to ensure effective client.Manage resources, budgets, and risk related to KBJVs engineering team activities.Manage and coordinate inter-related engineering team activities.Mentor and develop design engineering team staff, fostering continuous improvement.Monitor design and engineering team resourcing against programme and workload, working with KBJV onboarding team to recruit additional SQEP personnel to ensure delivery against project requirements.Report to project senior leadership team and key stakeholders on a weekly and monthly basis.Resolve complex technical and managerial challenges.This profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be given.What do you bring to the role? Professionally qualified Senior Manager with at least 10 years post profession qualification or 15 years experience.Academic Qualifications - (HNC, HND, BSc, MSc, BEng, MEng)Experience of similar roleCSCS - White PQP/AQPSignificant experience in design and engineering leadership roles.Strong project management and team leadership abilities.Excellent stakeholder management and communication skills.A thorough understanding of design processes, procedures and standards.Ability to manage multiple priorities and deadlines.Desirable:Experience in the Nuclear environment would be considered beneficial.Proficiency in relevant design and project management software.Whats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentTPBN1_UKTJ

KierBAM are a Joint Venture (JV) partnership between Kier and BAM UK & Ireland - BAM UK & Ireland's infrastructure segment is currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking a Survey CAD Modelling Technician.This role focuses on supporting the survey engineers, by processing raw data gathered from site surveys and completing survey modelling requests. The role will have a particular focus on processing laser scanner surveys. The ideal candidate will have significant experience operating 2D and 3D CAD programmes, and an understanding of surveying and the construction industry.Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and who have been UK residents for the last 5 years can be considered for this role.Your team Location: Devonport Dockyard, PlymouthContract: Permanent, 42.5 hours a weekMaking Possible In this role as Survey CAD Modelling Technician, you will be working in a live MOD facility. Your day-to-day tasks will include:Verify and process survey data from field surveyors. Process total station surveys to report on constructions stagesProcess laser scanning surveys. Clean and model surveys to determine if construction tolerances have been metEnsure survey data is collected and recorded accurately, following project QA/QC standardsProvide drawing and modelling services from survey or design data to support the survey, engineering and construction teamsAssist with the implementation of quality control procedures, particularly in accordance with QC1 requirements; maintaining the highest standards of traceability, tolerances, reportingManage and archive survey files and records to support project compliance and audits, using the Projects Document Management systemSupport the Business Systems Manager and wider Business Excellence team as requiredThis profile is not exhaustive. From time to time, you may be required by the Company to perform other tasks, which are not included in the above description, but are within your capabilities and, where necessary, training, and full support will be givenWhat do you bring to the role? Essential:Degree, diploma, or relevant qualification in Civil Engineering, Surveying, Architecture, or ConstructionStrong skills in AutoCAD (Civil3D) and RevitConsiderable years of experience in a similar position within the construction industryKnowledge of BIM or digital construction processesUnderstanding of document control and reporting requirementsStrong attention to detail and organizational skillsExcellent communication and teamwork abilitiesCSCS Card and relevant site safety qualificationsMember of the CinstCES (or technical member working towards full member), or another bodySite based role, hybrid or home based role will be consideredDesirable:Experience with survey processing software; Leica Infinity/Leica Cyclone 3DFamiliarity survey equipment; total stations, GPS/GNSS and laser scannersUnderstanding of QC1 procedures and quality documentation in a civils contextWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you.TPBN1_UKTJ

Are you a skilled maintenance engineer ready to drive operational excellence in a world-class manufacturing environment? HellermannTyton has an exciting Multi Skilled Maintenance Engineer opportunity! Location: 39 William Prance Road , Plymouth , Devon , PL6 5WR Salary: £32,000 - £40,000 Job Type: Full Time, Permanent About Us: At HellermannTyton, we’re more than just a leading manufacturer - we’re a trusted global partner in cable management, data connectivity, and network infrastructure solutions. Since 1935, our mission has been to provide innovative solutions for all cable management needs – with customer satisfaction as our priority. Our portfolio includes more than 75,000 items, and we operate 15 world-class manufacturing facilities in 38 countries, employing over 6,000 people. You will be joining a business with ambitious growth plans, currently undergoing a period of change to enhance our performance and seize every opportunity for greater success. We strive to be elite and are looking for individuals who share this vision. Multi Skilled Maintenance Engineer - The Role: The Multi-Skilled Maintenance Engineer plays a critical hands-on role in ensuring the safe, reliable, and efficient operation of injection moulding, extrusion, automation, and facility equipment. You will be responsible for both reactive and planned maintenance, first-fix repairs, and accurate documentation through our maintenance management system. Working closely with the Maintenance Team Leader and Production Team Leaders, you will contribute to asset uptime, quality performance, and continuous improvement while developing technical foundations for future leadership roles. Multi Skilled Maintenance Engineer - Key Responsibilities: • Complete all maintenance tasks in line with site safety procedures, risk assessments, and legal requirements, performing dynamic risk assessments before each job, • Respond promptly to equipment breakdowns across manufacturing and site services, ensuring permanent and robust fixes with accurate documentation, • Execute planned preventative maintenance tasks as scheduled and support root cause analysis and continuous improvement initiatives, • Apply strong electrical, mechanical, pneumatic, and hydraulic diagnostic skills to identify and resolve complex faults, • Collaborate with Production, Quality, and Engineering teams to ensure efficient factory operation and maintain accurate data integrity in maintenance systems Multi Skilled Maintenance Engineer - You: • Hold an ONC, NVQ Level 3, or equivalent engineering qualification with a completed apprenticeship in a relevant engineering discipline, • Have experience working in manufacturing or processing environments with strong understanding of health and safety regulations, • Possess demonstrated fault-finding capability on electrical systems and competence with pneumatics, hydraulics, and variable speed drives, • Are proactive and self-motivated with strong problem-solving skills and ability to communicate technical findings to non-technical colleagues, • Demonstrate calmness under pressure and a collaborative approach to cross-functional teamwork Benefits: • Enhanced annual leave, • Enhanced family-friendly leave policies, • An enhanced sick pay scheme, • Comprehensive mental health and wellbeing support, including access to counselling, an employee assistance programme, mortgage brokering services, and additional resources for you and your family, • Free on-site car parking, • Subsidised canteen facilities at our larger locations We operate a strict Preferred Supplier List for recruitment agencies and are not currently seeking additional partners. Any CVs submitted speculatively by agencies outside of our PSL will be treated as a gift, and no fees will be payable. To submit your CV for this exciting Multi Skilled Maintenance Engineer opportunity, click Apply today!

Are you ready to optimise manufacturing excellence? HellermannTyton has an exciting Moulding Process Engineer opportunity! Location: 39 William Prance Road , Plymouth , Devon , PL6 5WR Salary: £33,000 - £38,000 Job Type: Full Time, Permanent About Us: At HellermannTyton, we’re more than just a leading manufacturer - we’re a trusted global partner in cable management, data connectivity, and network infrastructure solutions. Since 1935, our mission has been to provide innovative solutions for all cable management needs – with customer satisfaction as our priority. Our portfolio includes more than 75,000 items, and we operate 15 world-class manufacturing facilities in 38 countries, employing over 6,000 people. You will be joining a business with ambitious growth plans, currently undergoing a period of change to enhance our performance and seize every opportunity for greater success. We strive to be elite and are looking for individuals who share this vision. Moulding Process Engineer - The Role: As a Moulding Process Engineer, you will develop, document, and optimise moulding process parameters to achieve consistent quality and performance. You will lead troubleshooting of process-related issues on moulding machines, tooling and auxiliary equipment, while supporting the introduction and validation of new moulds. You will champion scientific moulding techniques and data-driven decision making, collaborate with Maintenance teams on continuous improvement activities, and provide technical training to setters and operators. Moulding Process Engineer - Key Responsibilities: • Develop, document, and optimise moulding process parameters to achieve consistent quality and performance, • Lead troubleshooting of process-related issues and identify sustainable corrective actions, • Support the introduction, commissioning, and validation of new moulds and tooling, • Champion scientific moulding techniques and data-driven decision making, • Collaborate with Maintenance and the CI Lead to drive TPM activities and equipment uptime, • Implement and support SMED activities to reduce changeover times, • Support the development and maintenance of process documentation including SOPs and validation reports, • Provide technical training and coaching to setters and operators, • Participate in trials, automation integration and continuous improvement projects, • Support engineering change management and Quality and Validation standards, • Promote a culture of right-first-time performance and continuous improvement Moulding Process Engineer - You: • Time served engineer or HNC (or equivalent) in a relevant engineering discipline, • Proven experience in moulding or extrusion process engineering in rubber, silicone, or plastic environments, • Strong understanding of moulding principles, tooling design, and machine control systems, • Hands-on experience with process optimisation, validation, and troubleshooting techniques, • Knowledge of TPM, SMED, Lean, continuous improvement principles and Six Sigma, • Data-driven approach to problem-solving, comfortable using SPC, capability studies, and DOE, • Effective communicator and team player able to influence across departments, • Methodical, safety-conscious, and resilient under pressure Benefits: • Enhanced annual leave, • Enhanced family-friendly leave policies, • An enhanced sick pay scheme, • Comprehensive mental health and wellbeing support, including access to counselling, an employee assistance programme, mortgage brokering services, and additional resources for you and your family, • Free on-site car parking, • Subsidised canteen facilities at our larger locations We operate a strict Preferred Supplier List for recruitment agencies and are not currently seeking additional partners. Any CVs submitted speculatively by agencies outside of our PSL will be treated as a gift, and no fees will be payable. To submit your CV for this exciting Moulding Process Engineer opportunity, click Apply today!

Trainee Field Service Engineer (Full Industry Training)£25,000 - £35,000 + Specialist Industry Training + Structured Progression + Local Patch + Door to Door + Life Insurance + Medical Insurance + Company Car + Enhanced Pension + 33 Days Holiday + BenefitsField Based, Covering Plymouth, Saltash, Tavistock, Ivybridge, Yelverton and surrounding areas. Are you an aspiring Field Service Engineer looking to break your way into industry and work for a Globally renowned business who offer full training into their industry to massively develop your skillset, giving you the opportunities to gain recognition and progress through the business all whilst working a local patch with optional overtime to ensure you keep a great work life balance?On offer is an exciting entry level opportunity for you to begin your career within engineering, getting the full training and support needed to develop your skillset, working as part of a business that has an excellent reputation for investing in and looking after their staff whilst giving them the opportunities to progress and forge a career within the business. This company are a Globally renowned industry leader, who work across industries with a range of products that allow them to dominate the market of their industry. Due to continued growth and the future goals of the business, they are looking to expand their workforce with motivated and enthusiastic individuals who they can invest in long term. On offer is a Trainee Field Service Engineer, where you will be responsible for the installation, maintenance and service of a variety of products within the Finance, Gaming and Retail industries where you will be trained completely on systems and products and will work across your patch to provide excellent customer service to their clients. This role would suit someone looking to forge a career within an industry leading business, where you can get the training and development needed to massively increase your skillset whilst ensuring you keep a great work life balance. The Role: Installation, Maintenance and Service of a variety of specialist electromechanical products Providing excellent customer service to a range of clients Working a local patch with no stays awayThe Person: Aspiring Engineer looking for future development From an Electro-Mechanical, Engineering or Technical Background Full UK Driver's License *Commutable to Plymouth and Surrounding areas. Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. We are an equal opportunities company and welcome applications from all suitable candidates.

BAM UK & Ireland's Infrastructure Segment are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Site Engineer to assist the Engineer in managing the technical compliance of the project to the design specification in order to fulfil the assigned project (or section) safely, on time and to the required quality. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and have been a UK residence for the last 5 years can be considered for this role.Making Possible As a Site Engineer, you will be responsible for the following:Assist in the preparation of as-built drawings.Assist in establishing effective systems to record work completed updating the Project Quality Plan accordingly.To assist in managing systems to enable the progress of work to be reviewed against time, quality, dimensions, and quantity.Assist in the recording and testing of workmanship and materials, i.e., drainage, concrete, piling, brickwork etc.Assist in providing engineering support to ensure technical problems are overcome and technical queries are answered.Responsible for setting out works constructed within allowable tolerances.Regularly checking the setting out points and benchmarks and checking that all setting out instruments and measuring equipment are delivered to site with a calibration certificate and recorded accordingly.Completing Daily Diaries.Ensures workforce understand setting out information has been identified as suitable for the type of work being carried out.Assist in the preparation of sketches for distribution on site, ensuring clear communication channels are in place for effective understanding.To be aware of the provisions of the Kier Safety, Health, and Environmental Management System and to assist in its implementation to ensure a safe working environment.Responsible for providing and maintaining setting out and dimensional control, to ensure accurate construction of the work.Record instructions.Maintain drawing register.What do you bring to the role? A degree qualification in civil engineering or equivalent is desirable one or more of: BSc, BA, BEng, Meng, Eng, Tech, MICE, TIStructE, LCIBSE, LCIBSEEng Tech, Completion of Higher Apprenticeship.May be working towards Chartership/Incorporation with IStructE, ICE or other appropriate professional body.Familiar in Leica Survey equipment (GPS, Total Station, Optical & digital levels) for Setting Out & SurveyExperience in similar role.Awareness of commercial processes.Familiar with Quality Management System and familiar in writing RAMS.Desirable:TWS or TWCFirst Aid at WorkSSSTSDeveloping ITPsExperience in Groundworks, Earthworks & Reinforced ConcreteNuclear experienceWhats in it for you? Competitive salaryA wide range of family-friendly policiesCompany car/car allowance/travel allowance8 % matched pension contributionsPrivate healthcareLife assurance26 days holiday2 wellbeing days1 volunteering dayPersonal and professional developmentAbout BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe.We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics.BAM is committed to ensuring a fully inclusive recruitment and onboarding process, so if at anytime you feel you may need any reasonable adjustments, do not hesitate to speak with one of our team, and we will do our best to support you.TPBN1_UKTJ

Baltic Recruitment are delighted to be partnering with SILOTANK, a leading manufacturer in the UK and Ireland for Chemical, Liquid and Drinking Water Storage Tanks to assist with their search for an experienced and driven Technical Sales/Business Development Manager to develop the sale of existing products and new products for the company. This role will cover the top half of the country from Birmingham upwards. This is an exciting opportunity to join a growing business and play a key role in driving significant growth across the UK market. Key Duties: • Achieve and exceed your UK new business sales revenue & margin targets and other KPI's which you will agree in consultation with the Managing Director., • To systematically follow-up, negotiate and close new business opportunities in the UK., • Generate and systematically qualify new business sales leads in targeted sectors, maintaining a substantial sales pipeline., • Update weekly the company's CRM database with qualified new business opportunities in the UK., • Spend a minimum of 50% of time in the field (UK) focused on promoting the company's products and generating new opportunities to quote for projects with new customers., • Manage the prompt submission of winning proposals / quotations / tenders in a timely and professional manner to new business prospects., • Attend relevant trade shows, exhibitions and networking opportunities throughout the UK. Key Requirements: • A minimum of 5-7 Years successful field sales experience with a proven track record of new business development is essential, ideally within technical sales or from an engineering background., • Experience of developing new business in some of our targeted sectors including - the Construction, Engineering, Water & Waste, Chemical, Process, Manufacturing, Food & Drink, Pharmaceutical, Civil Engineering, and/or dealing with Tier 1& 2 contractors would be beneficial., • Current knowledge of/ relationships with buyers and sourcing professionals working in some of the sectors identified above the UK will be a distinct advantage., • It is anticipated that the successful candidate will have a working knowledge of the Public & Private sector tendering and negotiation process. The Package: • Competitive basic salary on offer, depending on experience., • Company bonus scheme., • Company car provided., • Company expenses provided., • Company pension scheme. JBRP1_UKTJ

A superb opportunity has come to fruition for experienced Project Engineer within the Marine civil engineering arena.Benefits:Competitive salary, car allowance, Bi-annual bonus, 10% pension and subsistencePurpose of the Role:The Project Engineer will support the delivery of reactive civil and marine engineering works. Key will be to provide engineering, technical and project coordination support.The role holder will work with operational and site teams to ensure safe, efficient and compliant delivery.Project Engineering & Delivery:Support the management and delivery of reactive works projects.Assist in ensuring projects are delivered in line with programme, budget and design requirements.Coordinate project information between office and site teamsLiaise with clients, subcontractors, suppliers, and internal stakeholders.Support all stages of project delivery, from initial enquiry through to completion.Technical & Design Support:Review drawings, specifications and technical information.Assist in resolving design and technical issues during project delivery.Produce sketches, drawings and engineering calculations where required.Contribute to engineering solutions that support safe and efficient delivery.Planning & Coordination:Assist with planning and sequencing of works.Support procurement of materials and equipment.Organise resources in line with programme requirements.Prepare and maintain project documentation.Site Support:Attend site to carry out surveys, inspections and progress reviews.Support setting out, quality checks and verification of completed works.Work with Site Managers and Supervisors to ensure works are delivered correctly.Provide technical support to site teams as required.Commercial & Reporting:Assist in preparation of cost estimates and tender submissions.Support tracking of project costs and resource usage.Contribute to reporting on project progress, risks and issues.Health, Safety & Environmental (HSE):Ensure all works are delivered in compliance with HSE standards.Support preparation of RAMS and other site documentation. Promote a strong safety culture across all project activities.Escalate any HSE concerns to management immediately.What Youll Bring:Collaborative and team-focusedProactive and solutions-orientedStrong attention to detailAdaptable and responsiveClear and confident communicatorCommercially awareQualifications & Experience Essential:Degree in Civil Engineering or related disciplineRelevant experience in a civil or marine construction environmentFull UK driving licenceDesirable:Experience working on marine or coastal projectsKnowledge of reactive / maintenance-based project deliveryWorking towards professional accreditation (ICE or equivalent)Projects are widespread right across the UKTPBN1_UKTJ

Rewards and Benefits on Offer; • Immediate start available, • Car allowance, • Competitive basic salary, • A streamlined, quick interview process, • Competitive benefits package MTrecs New Opportunity; MTrec Technical are proudly representing our prestigious manufacturing client by recruiting a permanent Sales Manager. You will be joining an industry leading company, with an excellent team-based culture and fantastic long-term career prospects. This role is well suited to an experienced Sales Manager from an Engineering/Technical background As Sales Manager, you will be responsible for supporting new and existing customers by identifying requirements, developing engineered solutions, and driving sustainable sales growth The Job Youll Do; • This is a full time, field-based role covering the UK (mainly England & Wales with occasional trips to Scotland)., • As Sales Manager, you will manage the full sales lifecycle., • Work closely with customers, internal engineering and commercial teams, and external suppliers to deliver technically robust and commercially viable solutions., • Develop and maintain strong, long term customer relationships through regular site visits and meetings, • Manage incoming enquiries and identify customer needs to develop tailored solutions, • Prepare high quality technical proposals, tenders, and commercial quotations, • Collaborate closely with internal engineering, projects, and service teams, as well as suppliers and contractors, • Negotiate technical and commercial aspects of projects in line with company objectives, • Contribute to the achievement of individual and team sales targets and overall business growth About You; • Must have experience working in a Technical Sales role within the Boiler/ Steam / Combustion industry or similar, • Strong understanding of Steam systems, • Background working in the engineering / manufacturing sector, • Proactive, self-motivated approach with a strong commercial mindset, • Customer-focused, with the ability to build trusted, long-term partnerships, • Confident communicator with strong written and verbal presentation skills, • Well organised, with excellent attention to detail and the ability to manage multiple opportunities simultaneously, • Comfortable working in a technical, solutions-led sales environment, • Familiarity with tendering processes, contracts, and commercial negotiations, • Ability to interpret technical information and communicate solutions clearly to non-technical stakeholders JBRP1_UKTJ

Powered by Water, Driven by Purpose South West Water keeps the South West flowing with safe, reliable drinking water and wastewater services across some of the UK's most stunning landscapes. We're proud to be part of Pennon Group, a leader in the UK water sector, working towards a greener future. Our goals? As well as lowering our carbon footprint, we're working with partners to plant 300,000 trees, restore peatlands and supporting farmers and landowners to improve water quality and wildlife. Whether you're starting out or seeking a new challenge, our scale and ambition create opportunities for you to shape your own career. Ready to make a splash? Join our team today. SRO Risk Manager Join South West Water's Strategic Resource Options Programme Strategic Resource Options Programme Exeter or Bristol HQ | Hybrid working | Full-time South West Water is delivering one of the most ambitious infrastructure programmes in the UK-our £4bn+ Strategic Resource Options (SRO) programme. We are seeking a Risk Manager to play a pivotal role at the heart of this transformation. This is an opportunity to influence major infrastructure delivery, support critical decision-making, and help ensure long-term resilience of water resources for customers and communities. The Role As Risk Manager, you will lead the development, implementation and continuous improvement of the programme-wide risk management framework across a diverse portfolio of major water infrastructure projects. You will work across reservoirs, transfer pipelines, water recycling, treatment infrastructure and enabling works, ensuring risks are proactively identified, assessed and managed throughout the programme lifecycle. You will collaborate with programme teams, delivery partners, consultants and senior stakeholders to embed a strong, proactive risk culture and deliver robust insight to support decision-making. Key Responsibilities • Lead and embed a programme-wide risk management framework across the SRO portfolio, • Establish consistent risk standards, governance and reporting processes, • Ensure risk processes are consistent with the Pennon risk management approach, • Regular liaison with the central risk team, • Identify, assess and manage strategic and project risks, • Facilitate risk workshops and scenario planning with key stakeholders, • Maintain risk registers, dashboards and insightful reporting for senior leadership, • Monitor emerging risks impacting cost, schedule and delivery, • Provide clear analysis of risk trends, exposure and mitigation effectiveness, • Support assurance activities, audits and regulatory submissions, • Integrate risk management with programme controls, planning and forecasting, • Contribute to quantitative risk analysis (cost and schedule), • Build strong relationships across teams, partners and stakeholders, • Promote a proactive, transparent risk management culture, • Coach and support teams to strengthen risk capabilityAbout YouEssential, • Significant experience in risk management within major infrastructure or capital delivery environments, • Experience working on complex, large-scale programmes (utilities, water, energy, transport or construction), • Strong understanding of risk management methodologies across enterprise, programme and project levels, • Experience facilitating risk workshops and engaging with senior stakeholders, • Ability to communicate complex risk information clearly to senior leadershipDesirable, • Degree in Risk Management, Engineering, Project Management, Construction Management or related discipline, • APM Risk Certificate (or equivalent), • PRINCE2 Practitioner, MSP or similar programme management qualification, • Experience with programme controls systems and risk management software, • Knowledge of quantitative risk analysis techniques (e.g. Monte Carlo), • Experience in major project delivery and regulated environmentsWhy Join South West Water, • Be part of a nationally significant infrastructure programme, • Influence delivery of critical water resource solutions, • Work in a collaborative, multi-stakeholder environment, • Shape and embed best practice risk management at programme scale, • Gain exposure to complex regulatory, commercial and delivery challengesWhat's in it for you? At South West Water, we believe in rewarding our people for their hard work and dedication. As our SRO Risk Manager, you'll enjoy: • Competitive Salary - Based on experience and expertise, • Company Car or Car Allowance - Supporting your role, • Annual Bonus Scheme - Rewarding performance, • Pension Scheme - Helping you plan for your future, • Healthcare Benefits - Including private healthcare and wellbeing support, • Professional Development - Ongoing training and career progression, • Employee Discounts - Across a range of services, • Generous Annual Leave - Supporting your work-life balanceClosing Date: Thursday 9th July 2026 We may close this vacancy early if we receive a high volume of applications. We encourage you to apply as soon as possible. Please note that the successful candidate will be subject to a mandatory DBS check as part of the onboarding process. Be yourself, we like it that way. Together, we will build a culture of belonging, where inclusion is instinctive. Diversity is our strength and a reflection of our communities. We care, we value everyone, we celebrate uniqueness. Our core values, which are essential to our success, are: Be Rock Solid - Build trust and be trusted. Be the one we all look to and can depend on. Be You - We want you to bring your best everyday. Be yourself and make your mark in your individual way. Be the Future - Embrace change. Drive Progress. Own the challenge. JBRP1_UKTJ

Trainee Field Service Engineer (Full Industry Training) £25,000 - £32,500 + Specialist Industry Training + Structured Progression + Local Patch + Door to Door + Life Insurance + Medical Insurance + Company Car + Enhanced Pension + 33 Days Holiday + Benefits Field Based, Covering Plymouth, Saltash, Tavistock, Ivybridge, Yelverton and surrounding areas. Are you from an IT, Service or similar background and looking to break your way into industry, working for a globally renowned business who offer full training into field service, where you can massively develop your skillset and progress through the business whilst working a local patch with optional overtime to ensure you keep a great work life balance? On offer is an exciting entry level opportunity for you to begin your career within engineering, getting the full training and support needed to develop your skillset, working as part of a business that has an excellent reputation for investing in and looking after their staff whilst giving them the opportunities to progress and forge a career within the business. This company are a Globally renowned industry leader, who work across industries with a range of products that allow them to dominate the market of their industry. Due to continued growth and the future goals of the business, they are looking to expand their workforce with motivated and enthusiastic individuals who they can invest in long term. On offer is a Tra...

Our client is a globally recognised leader in the Lighting Manufacturing market sector, with operations in over 25 countries and a team of more than 2500 employees. The high quality product portfolio includes indoor and outdoor lighting as well as IoT controls solutions for major commercial, healthcare, education, retail and industrial lighting projects. We are currently seeking a Key Account Manager to strengthen relationships with M&E consultants, lighting designers, main contractors, and specialist electrical contractors across the London area - a key revenue region for the business. Key responsibilities include: Managing and developing opportunities within your territory, acting as the primary contact for customer orders and project enquiries. Building a strong and consistent pipeline by identifying new projects and generating qualified leads across the defined route to market. Presenting the company’s solutions, responding to client enquiries, and managing the sales process through to negotiation, invoicing, and project close. You’ll be supported by a dedicated lighting design, technical, and logistics team, with direct reporting to the National Sales Manager. The company also offers access to structured internal training programmes, designed to support career development across multiple pathways, including sales, design, engineering, and management. • Proven experience within commercial lighting technical sales 5 years plus, • Proven experience working with the route to market, • Experience hitting multi-million pound targets, • Specification expertise within the lighting industry, • Ability to use CRM systems effectively and monitor tickets from start to finish, • Ability to travel into London in the form of a car allowance, • £55,000 - £65,000 basic salary negotiable / annum, • Car allowance, • Company credit card, • 25 days holiday, increasing with service, • Pension contributions, • Healthcare benefits, • Ongoing training and development from internal training specialists, • Furthermore, you will benefit from the new London campus opening in October, should you wish to have a workspace instead of working remotely

We are currently looking to recruit Senior Laboratory Technicians at laboratories and projects throughout the UK. Locations include: HS2 South Laboratory, Aylesbury, Oxfordshire HS2 North Laboratory, Greatworth, Northamptonshire Devonport Docks, Plymouth Hinkley Point C, Near Bridgwater, Somerset Kilsyth Laboratory, Scotland Inverness Laboratory, Scotland The roles require a suitable candidate with extensive experience in materials related testing ranging from Concrete, Soils, and Aggregates. Candidate will need to be flexible as there maybe a requirement to support the wider materials team within the business. Making Possible Setting a personal example in safety matters Assist with day to day running of mobile site testing/laboratory testing including organising workload, on site sampling and testing. Liaising with laboratory manager to ensure the provision of testing capabilities. Communicating regularly and effectively with internal/external site engineering staff on priorities and testing requirements as and when required Production of test reports/certificates to client. Deliver training/proficiency checks to/for laboratory personnel Ensure that site sampling and laboratory testing is carried out to high standards of safety, quality and efficiency Ensure that adequate and proper records are kept and filed correctly to satisfy the requirements of the laboratory management system and UKAS requirements Ensure that sampling and testing is carried out to the appropriate British/European Standards Ensure test equipment is checked, cleaned and maintained to an acceptable level What do you bring to the role? Educated to Level 3 NVQ standard or similar experience. SMSTS or SSSTS an advantage CSCS card Driving Licence Soils sampling and site/laboratory testing in accordance with BS 1377; minimum proficiency including use of Nuclear Density Gauge, In-situ Plate Load Apparatus, In-situ Sand Replacement Density, earthworks and laboratory shear strength triaxial testing Laboratory Materials/Aggregate sampling/laboratory testing in accordance with all relevant standards Concrete/Spray Concrete sampling/testing in accordance with all relevant standards The applicant should have experience of a day to day supervisory role within permanent/site laboratory. Be able to cope with completion deadlines and contractual testing requirements. Organising staff and resources within a high pressure environment in order to cope with all volumes of testing specified. Communicating daily duties to all staff members and ensuring all tests and site activities were completed within the contractual timescales. Knowledge of ISO 17025 Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development About BAM Building a sustainable tomorrow. Thats our mission and our promise at BAM. Its how we engineer vital infrastructure and construct high-quality buildings as one of the largest construction companies in Europe. We strive to create an environment where everybody feels welcome and valued. Were on an exciting journey to employ the best talent to join us regardless of social background, race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. TPBN1_UKTJ

Overview Considering making an application for this job Check all the details in this job description, and then click on Apply. Due to continued growth, ACD Electrical Services Ltd are seeking a highly skilled Electrician to join our team and lead commercial installation projects. About the Role The Electrician will play a key role in the successful delivery of commercial electrical installations, taking responsibility for managing on-site teams, overseeing technical quality, and ensuring safe, compliant, and efficient project delivery. You will work closely with project managers, clients, apprentices, and fellow engineers to maintain the high standards ACD Electrical is known for. This is an excellent opportunity for an experienced electrician who is confident running complex commercial projects from design through to completion. Responsibilities Lead day-to-day delivery of commercial electrical installation works, ensuring projects are completed on time and to specification. Manage site operations, coordinate with contractors, and maintain strong communication with clients. Interpret and work from drawings, specifications, and technical documents. Conduct on-site risk assessments and ensure full compliance with health & safety requirements and BS 7671. Oversee quality control, testing, and commissioning processes. Accurately document site progress, variations, and completed works. Mentor apprentices and contribute to their professional development. Troubleshoot and resolve technical issues efficiently. Essential Skills & Experience Fully qualified Electrician (NVQ Level 3 or equivalent). 2391 Test & Inspection qualification. Proven management or supervisory experience on commercial electrical sites. Comprehensive knowledge of commercial electrical systems, containment, distribution, and control gear. Up-to-date 18th Edition qualification. ECS Gold Card (or eligibility). Strong organisational, communication, and team leadership skills. Ability to read and interpret technical drawings. Full UK driving licence. Would be an advantage: SSSTS/SMSTS certification. PASMA, IPAF, HV certification, or other relevant industry training. What We Offer Competitive salary with overtime and progression opportunities. Company van, fuel card, and tools. Ongoing training and CPD, including specialist certifications. Opportunity to work on high-profile commercial and industrial projects alongside a skilled engineering team. xrnqpay Supportive management structure with a strong focus on safety, quality, and professional development. Job Types: Full-time, Permanent Pay: £37,440.00-£46,800.00 per year Benefits: Company car Company pension On-site parking Work Location: In person

My Four Wheels are looking to expand our team and are recruiting both part time and full time Driving Instructors though out the UK. Next year there will be a record 700,000 learner drivers hitting our roads, there has never been a better time to become a Driving Instructor. Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Becoming a Driving Instructor has many benefits, these include – A car – Get your very own dual controlled car to teach in Be your own boss – work hours which suit you (Monday to Sunday - 7am to 7pm) Excellent Pay – £20,000 - £35,000 per year We are looking for candidates who meet the following criteria – Reliable, Punctual, Patient, Possess excellent customer service skills, Enjoy meeting new people We provide the most cost effective training in the UK. Once you have completed your training, you are guaranteed a job with us. After working with us for 1 year, we refund your training fees on a weekly basis up until year 3. Should you already hold you ADI license, no training is required. Anyone can become a Driving Instructor, recently we have recruited candidates from driving roles such as HGV Drivers, Teachers, Delivery Drivers, Accountants and Estate Agents. We also have successfully recruited candidates who decided to completely change their career from sales right to engineering. To apply for our role, you need to meet the following criteria: Have held a full UK driving licence (or approved foreign licence) for at least 2 1/2 years Have not been banned from driving in the last 4 years Have no more than 6 points on your licence. xsngvjr For more information, please click apply.

Water Treatment Account Manager | Exeter & South West Summary: Are you an experienced Water Treatment Account Manager looking to join one of the UKs leading water treatment companies? This is an exciting opportunity to manage and grow industrial water treatment accounts across the South West, working with customers operating steam boilers, cooling towers, and closed systems. Youll inherit established accounts while also developing new business across the region. Based in Exeter and covering the South West peninsula, this role offers genuine autonomy, excellent earning potential, and one of the best benefits packages in the industry. The Company: • One of the UKs most established and recognisable Water Treatment companies., • Excellent staff retention and low employee turnover people stay because theyre looked after properly., • Strong team culture with a supportive and experienced management structure., • Flexible and autonomous working environment no micromanagement., • Specialists in industrial water treatment solutions including steam boiler treatment, cooling tower treatment, closed systems, and compliance services., • Significant investment in lead generation, technical support, and marketing activities. The Role: • As Water Treatment Account Manager, youll manage and grow industrial water treatment accounts across Exeter and the South West., • Working with customers operating steam boilers, cooling towers, and associated industrial process systems., • Split between account management and business development activities., • Develop long-term client relationships while identifying opportunities to grow spend across your customer base., • Sell a full range of water treatment chemicals, monitoring solutions, and service contracts., • Supported by an experienced technical and operations team., • Manage your own diary and territory with a high level of autonomy., • Home-based role with regular travel across Devon, Cornwall, Somerset and the wider South West region. The Ideal Candidate: • Previous sales or account management experience within the Water Treatment industry., • Experience working with industrial water treatment customers, particularly steam boilers and cooling towers., • Strong relationship-building and commercial skills., • Comfortable managing existing accounts while actively developing new business opportunities., • Self-motivated, organised, and capable of working independently., • Science-related qualifications would be advantageous but are not essential., • Based in Exeter or elsewhere within the South West. What Youll Get: • £40,000 £50,000 basic salary depending on experience., • 15% bonus scheme., • Market-leading benefits package including generous employer pension contributions., • Company car or car allowance., • Laptop and mobile phone., • 25 days holiday plus bank holidays., • Established customer accounts from day one., • Ongoing support, training, and career development opportunities. The Process: For an immediate interview, click APPLY NOW or contact us at JS Selection. JS Selection specialises in recruitment for the Water Treatment, Environmental, and Engineering sectors. We recruit for Account Manager jobs, Business Development Manager jobs, Sales Engineer roles, Service Engineer vacancies, Water Hygiene positions, Operations Manager roles, and Technical Sales opportunities across the UK. Due to the high volume of applications, we may not be able to respond to every applicant individually. If you have not heard from us within 7 days, unfortunately your application has not been successful on this occasion. However, your details will be retained on our system and we may contact you regarding future suitable opportunities. JBRP1_UKTJ

My Four Wheels are looking to expand our team and are recruiting both part time and full time Driving Instructors though out the UK. Next year there will be a record 700,000 learner drivers hitting our roads, there has never been a better time to become a Driving Instructor. Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Becoming a Driving Instructor has many benefits, these include – A car – Get your very own dual controlled car to teach in Be your own boss – work hours which suit you (Monday to Sunday - 7am to 7pm) Excellent Pay – £20,000 - £35,000 per year We are looking for candidates who meet the following criteria – Reliable, Punctual, Patient, Possess excellent customer service skills, Enjoy meeting new people We provide the most cost effective training in the UK. Once you have completed your training, you are guaranteed a job with us. After working with us for 1 year, we refund your training fees on a weekly basis up until year 3. Should you already hold you ADI license, no training is required. Anyone can become a Driving Instructor, recently we have recruited candidates from driving roles such as HGV Drivers, Teachers, Delivery Drivers, Accountants and Estate Agents. We also have successfully recruited candidates who decided to completely change their career from sales right to engineering. To apply for our role, you need to meet the following criteria: Have held a full UK driving licence (or approved foreign licence) for at least 2 1/2 years Have not been banned from driving in the last 4 years Have no more than 6 points on your licence. xsngvjr For more information, please click apply.

My Four Wheels are looking to expand our team and are recruiting both part time and full time Driving Instructors though out the UK. Next year there will be a record 700,000 learner drivers hitting our roads, there has never been a better time to become a Driving Instructor. Find out more about the daily tasks, overall responsibilities, and required experience for this opportunity by scrolling down now. Becoming a Driving Instructor has many benefits, these include – A car – Get your very own dual controlled car to teach in Be your own boss – work hours which suit you (Monday to Sunday - 7am to 7pm) Excellent Pay – £20,000 - £35,000 per year We are looking for candidates who meet the following criteria – Reliable, Punctual, Patient, Possess excellent customer service skills, Enjoy meeting new people We provide the most cost effective training in the UK. Once you have completed your training, you are guaranteed a job with us. After working with us for 1 year, we refund your training fees on a weekly basis up until year 3. Should you already hold you ADI license, no training is required. Anyone can become a Driving Instructor, recently we have recruited candidates from driving roles such as HGV Drivers, Teachers, Delivery Drivers, Accountants and Estate Agents. We also have successfully recruited candidates who decided to completely change their career from sales right to engineering. To apply for our role, you need to meet the following criteria: Have held a full UK driving licence (or approved foreign licence) for at least 2 1/2 years Have not been banned from driving in the last 4 years Have no more than 6 points on your licence. xsngvjr For more information, please click apply.

DK Recruitment are working with a global Manufacturer who are looking to offer an experienced and qualified Electrical or Mechanical Technician a new career and join their successful team based in Plymouth. Our client can offer a passionate, committed and rewarding culture for you to grow and thrive within your role. Main Duties: Attend to electro-mechanical faults, diagnosing and repairing in a timely manner to keep up with production targets. Conduct Planned Preventative Maintenance (PPM) and refurbish offline machinery and ancillaries. Ensures all manufacturing equipment is set up and produces product according to established Quality Control specifications and standards. Maintaining acceptable quality and waste levels. Ensures that any statutory legislation and/or quality system requirements are adhered to regarding process changes and equipment modification. Continually supervises in-process quality, addressing issues as needed to prevent product holds. Ensures that all existing and new equipment and processes are operated in compliance with all current Quality Control, Health & Safety and Environmental legislation and regulatory requirements. Works closely with Operational, Engineering and Quality Control personnel to actively pursue and promote continuous improvement; SSU, 5S, CIAS, Near Miss, etc. Ensure all equipment is maintained as assigned, and in accordance with requirements detailed on the appropriate schedule/plan or work instruction. Ensuring the minimisation of downtime within planned costs for repair and spares To support engineering in the installation and validation of new equipment and technology and ensure a smooth and acceptable transfer to production. Become actively involved and take part in regular team meetings and participate in project teams as required. Ensures accurate and timely entry of data on to SAP. Operational responsibilities include covering breaks, operating production machinery, assembling product, performing quality checks and pallet release duties. Education & Experience: Qualification in electrical or Mechanical engineering (e.g. City & Guilds, HND etc.) or a time served apprenticeship. Experience in a high volume, highly automated manufacturing environment desirable. Experience in maintenance and fault finding. Methodical in your approach, organised and self-motivated with a safety awareness of electrical, compressed air and pressurised systems. Benefits: Matched contribution Pension scheme up to 10% of salary Life assurance and critical illness cover Private Medical Insurance Share save scheme – matched up to £150/month Reward & recognition scheme linked to Health and Safety and Continuous Improvement Employee Assistance Program, supporting physical, mental and financial wellbeing Flexible benefits including cycle to work scheme Subsidized canteen Free car parking 24 days holiday (25 after 5 years)

BAM Infrastructure are currently delivering the redevelopment project at a Royal Navy site located in Plymouth and we are seeking an experienced Section Engineer. Due to the site being a high-security military naval base, additional security checks will be required a BPSS level of security clearance is necessary. These checks can take up to 8 weeks to process. Only candidates holding EU, NATO, 5 Eyes, or MISWG member passports and have been a UK residence for the last 5 years can be considered for this role. Your work environment BAM operates a flexible working policy People are at the heart of what we do at Bam. We recognise that creating a diverse and inclusive environment that nurtures our employees and encourages them to bring their best and whole self to work is crucial. We're on an exciting journey to get us there by recruiting the very best talent to join us regardless of race, colour, religion, national or ethnic origin, sexual orientation, gender identity or expression, age, disability or other characteristics. Your mission As a Section Engineer, you will be responsible for the following: Manage the preparation of as-built drawings. Establishing effective systems to record work completed and updating the Project Quality Plan accordingly. To manage in managing systems to enable the progress of work to be reviewed against time, quality, dimensions and quantity. Assist in the recording and testing of workmanship and materials, i.e., drainage, concrete, piling, brickwork etc. Provides engineering support to ensure technical problems are overcome and technical queries are answered. Responsible for setting out works constructed within allowable tolerances. Regularly checking the setting out points and benchmarks and checking that all setting out instruments and measuring equipment are delivered to site with a calibration certificate and recorded accordingly. Ensures workforce understand setting out information has been identified as suitable for the type of work being carried out. Manage the preparation of sketches for distribution on site, ensuring clear communication channels are in place for effective understanding. Responsible for providing and maintaining setting out and dimensional control, to ensure accurate construction of the work. Record instructions. Maintain drawing register. Who are we looking for? A degree qualification in civil engineering or equivalent is desirable one or more of: BSc, BA, BEng, Meng, Eng, Tech, MICE, TIStructE, LCIBSE, LCIBSEEng Tech, Completion of Higher Apprenticeship. SSSTS CSCS White PQP/AQP May be working towards Chartership/Incorporation with IStructE, ICE or other appropriate professional body. Experience in a similar role. Whats in it for you? Competitive salary A wide range of family-friendly policies Company car/car allowance/travel allowance 8 % matched pension contributions Private healthcare Life assurance 26 days holiday 2 wellbeing days 1 volunteering day Personal and professional development BAM Infrastructure is also committed to equality of opportunity in all its employment practices and to developing policies that support work-life balance. TPBN1_UKTJ